Sylvania 6519DB Manual de usuario

Sylvania
Marca
Sylvania
Modelo
6519DB
Categoría
Reproductores de DVD
Tipo
Manual de usuario

Este manual también es adecuado para

19-INCH COLOR TV/DVD
6519DB
OWNER’S
MANUAL
If you need additional assistance for set-up or operating
after reading owner’s manual, please call
TOLL FREE : 1-800-968-3429
Please read before using this equipment.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
SUPPLIED ACCESSORIES
Batteries
Remote Control Unit
ACCESSORIES
2 AA Batteries
N0287UD
PART NO.
TD250-Body 01.5.10 6:54 PM Page 1
–
2
–
EN
0C28
–
2
–
1.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.
2.Retain Instructions-The safety and operating instructions
should be retained for future reference.
3.Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All operating and use instructions
should be followed.
5.Cleaning-Unplug TV/DVD from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possi-
bility of the loss of an authorization code for a CATV con-
verter, is not intended to be unplugged by the user for clean-
ing or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description other-
wise required in item 5.
6.Attachments-Do not use attachments not recommended by
the TV/DVD manufacturer as they may cause hazards.
7.Water and Moisture-Do not use this TV/DVD near water-
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
8.Accessories-Do not place this TV/DVD on an unstable cart,
stand, tripod, bracket, or table. The TV/DVD may fall, caus-
ing serious injury to someone, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
TV/DVD. Any mounting of the
appliance should follow the manu-
facturer’s instructions and should use
a mounting accessory recommended
by the manufacturer. An appliance
and cart combination should be
moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the appli-
ance and cart combination to over-
turn.
Accessoires- Ne placez pas cette TV/DVD sur une table
roulante, un support, un trépied, une console ou une table
instable. Cette TV/DVD risquerait de tomber, pouvant
gravement blesser quelqu'un et l'appareil même pourrait
être sérieusement endommagé. N'utilisez qu'une table
roulante, un support, un trépied, une console ou une table
recommandé par le fabriquant, ou vendu avec la TV/DVD.
Pour n'importe quelle installation de l'appareil, on devra
suivre les instructions du fabriquant et l'on devra utiliser les
accessoires d'installation recommandés par le fabriquant.
L'ensemble combiné de l'appareil avec une table roulante
devra être déplacé avec précaution. Des arrêts brusques,
une force excessive et des surfaces inégales peuvent provo-
quer le renversement de l'ensemble combiné de
l'appareil/table roulante.
9.Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the TV/DVD and to protect it from overheat-
ing, and these openings must not be blocked or covered.
The openings should never be blocked by placing the
TV/DVD on a bed, sofa, rug, or other similar surface. This
TV/DVD should never be placed near or over a radiator or
heat register. This TV/DVD should not be placed in a built-
in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions
have been adhered to.
10.Power Sources-This TV/DVD should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For TV/DVDs intended to operate from battery
power, or other sources, refer to the operating instructions.
11.Grounding or Polarization-This TV/DVD is equipped
with a polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try revers-
ing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON-
NEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT DAN-
GEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
The caution marking is located on the rear of the cabinet.
PORTABLE CART WARNING
AVERTISSEMENT POUR UNE
TABLE ROULANTE PORTATIVE
S3126A
IMPORTANT SAFEGUARDS
TD250-Body 01.5.10 6:54 PM Page 2
–
3
–
EN
0C28
–
3
–
GROUND CLAMPS
NEC - NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
S2898A
WIRE
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRODE SYSTEM
(NEC ART 250, PART H)
SERVICE
EQUIPMENT
CLAMP
ANTENNA
LEAD IN
ANTENNA
POWER SERVICE GROUNDING
GROUND
ELECTRIC
FIGURE A
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying par-
ticular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV/DVD, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements
for the grounding electrode. (Fig. A)
14.Lightning-For added protection for this TV/DVD receiver
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the TV/DVD due to lightning and
power-line surges.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never push objects of any kind
into this TV/DVD through openings as they may touch dan-
gerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on
the TV/DVD.
18.Servicing-Do not attempt to service this TV/DVD yourself
as opening or removing covers may expose you to danger-
ous voltage or other hazards. Refer all servicing to qualified
service personnel.
19.Damage Requiring Service-Unplug this TV/DVD from
the wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the
TV/DVD.
c. If the TV/DVD has been exposed to rain or water.
d. If the TV/DVD does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions, as improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the TV/DVD to its normal operation.
e. If the TV/DVD has been dropped or damaged in any way.
f. When the TV/DVD exhibits a distinct change in perfor-
mance-this indicates a need for service.
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same character-
istics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other haz-
ards.
21.Safety Check-Upon completion of any service or repairs to
this TV/DVD, ask the service technician to perform routine
safety checks to determine that the TV/DVD is in proper
operating condition.
22.Heat-This TV/DVD product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
TD250-Body 01.5.10 6:54 PM Page 3
–
4
–
EN
0C28
–
4
–
RADIO-TV INTERFERENCE
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV
technician for help.
FCC WARNING- This equipment may gener-
ate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction man-
ual. The user could lose the authority to oper-
ate this equipment if an unauthorized change
or modification is made.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public perfor-
mance and lending of discs are prohibited.
LASER SAFETY
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to ser-
vice this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUST-
MENTS OR PERFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est con-
forme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
PRECAUTIONS
TD250-Body 01.5.10 6:54 PM Page 4
–
5
–
EN
0C28
–
5
–
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
LOCATION
For safe operation and satisfactory performance of
your TV/DVD, keep the following in mind when
selecting a place for its installation:
•
Shield it from direct sunlight and keep it away from
sources of intense heat.
•
Avoid dusty or humid places.
•
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top and bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.
•
Install unit in a horizontal position.
•
Avoid locations subject to strong vibration.
•
Do not place the TV/DVD near strong magnetic fields.
•
Avoid moving TV/DVD to locations where temper-
ature differences are extreme.
•
Do not handle the power cord with wet hands.
•
Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.
•
If, by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
•
Do not put your fingers or objects into the
TV/DVD disc loading tray.
•
Do not place anything directly on top of the unit.
WARNING
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a TV/DVD
which has moisture, it may damage the DVD and
TV/DVD. Therefore when the condensation occurs
inside the unit, turn the POWER button on and allow
at least 2 hours for the unit to dry out.
The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial
number as yours. You should record the number and other vital information here and retain this book as a per-
manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-
tions concerning chemical wastes.
TD250-Body 01.5.10 6:54 PM Page 5
–
6
–
EN
0C28
–
6
–
C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2
C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .7
C OPERATING CONTROLS AND FUNCTIONS 8
C PREPARATION FOR USE . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTIONS . . . . . . .10
INSTALLING THE BATTERIES . . . . . . . . . . .12
CONNECTING TO EXTERNAL INPUT JACKS
.
12
CONNECTING TO A STEREO SYSTEM (for DVD)
.13
CONNECTING TO AN AMPLIFIER
EQUIPPED WITH DIGITAL INPUT JACKS,
MD DECK OR DAT DECK (for DVD) . . . . . .13
CONNECTING TO A DOLBY DIGITAL
DECODER OR DTS DECODER (for DVD) . .14
TV SECTION
C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .15
LANGUAGE SELECTION . . . . . . . . . . . . . . .15
CHANNEL PRESETTING . . . . . . . . . . . . . . .15
C OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . .16
WATCHING A TV PROGRAM . . . . . . . . . . . .16
SELECTING THE SLEEP TIMER . . . . . . . . .16
CLOSED CAPTION . . . . . . . . . . . . . . . . . . . .16
PICTURE ADJUSTMENT . . . . . . . . . . . . . . . .17
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .18
D
VD SECTION
C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .20
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .20
DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .20
SYMBOLS USED IN THIS MANUAL . . . . . .20
C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .21
PLAYING A DVD VIDEO OR AN AUDIO CD
.21
USING THE DVD MENUS . . . . . . . . . . . . . . .21
USING THE TITLE MENU . . . . . . . . . . . . . . .22
PAUSING PLAYBACK OR DISPLAYING
A STILL PICTURE . . . . . . . . . . . . . . . . . . . . .22
RESUMING PLAYBACK FROM THE
POINT WHERE PLAYBACK STOPPED . . . .22
STEPPING THROUGH FRAMES . . . . . . . . . .22
FAST FORWARD/REVERSE . . . . . . . . . . . . .23
SLOW MOTION . . . . . . . . . . . . . . . . . . . . . . .23
STARTING FROM A DESIRED TRACK . . . .23
STARTING FROM A DESIRED TIME COUNT
.23
PLAYING FROM A DESIRED TITLE OR
CHAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
RANDOM (Audio CD) . . . . . . . . . . . . . . . . . .24
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . .25
PROGRAM (Audio CD) . . . . . . . . . . . . . . . . .25
C SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . .26
CHANGING THE AUDIO LANGUAGE OR
SOUND MODE . . . . . . . . . . . . . . . . . . . . . . . .26
CHANGING THE SUBTITLE LANGUAGE . .27
CHANGING THE CAMERA ANGLE
(Multi-Angle Pictures) . . . . . . . . . . . . . . . . . . .27
CHANGING THE ON-SCREEN DISPLAY . . .28
C CHANGING THE SETUP ITEMS . . . . . . . . .29
LANGUAGE SETTINGS . . . . . . . . . . . . . . . .29
VIDEO SETTINGS . . . . . . . . . . . . . . . . . . . . .30
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .30
PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . .31
OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . .32
C LANGUAGE CODE LIST . . . . . . . . . . . . . . . .33
C TROUBLESHOOTING GUIDE . . . . . . . . . . .34
C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .37
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .37
C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .38
C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover
TABLE OF CONTENTS
TD250-Body 01.5.10 6:54 PM Page 6
–
7
–
EN
0C28
–
7
–
TV
DVD
¡Dolby Digital sound
This player can handle Dolby Digital surround sound
having 5.1 channels when connected to a Dolby Digital
decoder.
¡Still/fast/slow/step playback
Various playback modes are available including still pic-
tures, fast forward/reverse, slow motion and step frames.
¡Random playback for audio CD
This player can shuffle the order of tracks to play them in
random order.
¡Program playback for audio CD
You can program the order of tracks to play them in any
desired order.
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Screen saver/Auto power-off functions
The screen saver program starts when there is no input
from the player for five minutes in the stop mode. When
the screen saver program is activated for 30 minutes, the
power is automatically turned off.
¡Subtitles in a desired language
You can select a desired language for the display subtitles,
if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle, if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and sound
mode, if different languages and modes are available on a
disc.
¡Tinted, Bright Black Matrix Picture Tube
¡181 Channel Selection
All VHF/UHF channels plus up to 125 cable channels.
¡PLL Frequency Synthesized Tuning
The latest PLL frequency synthesized electronic tuning
system provides free and easy channel selection, and lets
you tune directly to any channel using the channel number
buttons (0~9 and +100-key) on the remote control.
¡On-Screen Function Display.
¡Full-Function Remote Control
¡Sleep Timer
¡Closed Caption Decoder
You may view specially labeled (cc) TV programs,
movies, news, prerecorded tapes, etc. with either a
dialogue caption or text display added to the program.
¡Auto Shut Off Function
If there is no air signal input from the antenna terminal and
no operation for 15 minutes, the TV will turn itself off
automatically.
¡V-CHIP
Enables parents to prevent their children from watching
inappropriate material on TV.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs
This player automatically detects if a loaded disc is DVD
or audio CD.
¡On-screen display
Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.
¡DTS (Digital Theater System)
Sound system different from Dolby Digital sound system
¡Search
Chapter search: Search for the chapter designated by user
is possible.
Title search: Search for the title designated by user is
possible.
Track search: Search for the track designated by user is
possible.
Time search: Search for the time designated by user is
possible.
¡Repeat
Chapter: Repeated playback of the chapter of the
disc being played is possible.
Title: Repeated playback of the title of the disc
being played is possible.
Track: Repeated playback of the track of the disc
being played is possible.
Disc
(audio CD)
: Repeated playback of the entire disc being
played is possible.
A-B: The part between A and B designated by
user is possible.
¡Zoom
4-time magnified screen can be displayed.
¡Marker
The part designated by user can be called back.
¡Resume Play
User can resume to playback from the part at which the
play was stopped.
¡SRS TruSurround
You can enjoy stereophonic virtual space on your existing
stereo system.
¡Dimmer
Brightness of the display can be varied.
¡Bit rate indication
¡Dynamic range control
This unit employs TruSurround system
of SRS Labs, Inc. as virtual
technology.
TruSurround and the symbol are trademarks of
SRS Labs, Inc.
TruSurround technology is incorporated under license
from SRS Labs, Inc.
FEATURES
TD250-Body 01.5.10 6:54 PM Page 7
–
8
–
EN
0C28
–
8
–
5.
VOLUME K/L buttons
Press to control the volume level for the DVD and TV.
6.CHANNEL K/L buttons
Press to select memorized channel.
Press to change to TV mode when DVD mode.
7.
Remote Sensor Window
8.STOP button
Stops operation of the disc.
9.
REV button
Fast reverses playback to a desired point.
10.
PLAY button
Starts playback of the disc contents.
Press to change to DVD mode when TV mode.
11.
FWD button
Fast forwards playback to a desired point.
12.
PAUSE button
Pauses the current disc operation.
13.
OPEN/CLOSE button
Press to insert discs into or remove them from the
tray.
14.
HEADPHONE jack
To connect headphone (not supplied) for personal
listening.
15.
MODE button
Activates program playback or random playback mode.
16.NUMBER button
TV Mode:
Press two digits to directly access the desired
channel.
Remember to press a "0" before a single digit
channel.
+100 button–
Press to select cable channels which are equal or
greater than number 100.
DVD Mode:
Press to enter the desired number.
+10 button–
Press to enter the desired numbers which are
equal or greater than number 10.
L-AUDIO-RVIDEO
STOP
PLAY
SKIPSKIP
PAUSE
HEADPHONE
POWER
VOLUME CHANNEL
OPEN/CLOSE
7421 8 181018 1213 14653
REV
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SKIP
SELECT
POWER PICTURE
OPEN/
CLOSE
CH.
VOL.
MUTEZOOM
SLEEP
123
456
789
0 +10
+100
26
27
16
17
18
9
12
23
20
22
15
25
24
21
10
28
29
30
33
11
35
5
6
13
34
19
8
31
32
4
36
OPERATING CONTROLS AND FUNCTIONS
TV/DVD FRONT PANEL
REMOTE CONTROL
[Fig. 2]
[Fig. 1]
1.
Disc loading tray
2.VIDEO input jack
Connect to the video output jack of a video
camera or VCR.
3.
AUDIO L/R input jacks
Connect to the audio output jacks of a video
camera or VCR.
4.
POWER button
Press to turn the power on and off.
TD250-Body 01.5.10 6:54 PM Page 8
–
9
–
EN
0C28
–
9
–
LR
AUDIO OUT
1
DIGITAL OUT
COAXIAL
38 403937
ANT.
31.ENTER button
Press to accept a setting.
32.
Arrow buttons
TV Mode:
Press to select a setting mode from the menu on
the TV screen.
Press to select or adjust from a particular menu.
DVD Mode:
Use when making settings while watching the
display on a TV screen.
33.
DISC MENU button
Displays the menus in the DVD.
34.
SELECT button
Press to change to TV mode, external input mode
or DVD mode.
35.
MUTE button
Press the MUTE button to turn off the sound
portion of the TV program. (Volume level display
turns LIGHT RED from LIGHT BLUE.) Press the
MUTE button again or press the VOL(ume) K or
L button to restore sound.
36.
PICTURE button
Press to enter picture adjustment mode.
37.
Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect
to a standard AC outlet.
38.
COAXIAL digital audio out jack
Connect to the digital input of an external
amplifier or decoder.
39.
AUDIO L/R output jack
Connect to the analog audio input of an external
amplifier or decoder.
NOTE: The AUDIO output jacks (red/white) on
the rear panel serve to give out DVD
sound, not TV sound and external input
sound.
40.
ANT. in jack
Connect to an antenna, cable system, or satellite
system.
17.
SLEEP button
Press the SLEEP button to display the sleep timer
and start the function. The shut off time can be
determined by the number of times you press the
button. (0, 10, 20, 30,..90, 0 minutes)
18.
SKIP buttons
Skip chapters or tracks to a desired point.
19.
ZOOM Button
Enlarges part of a DVD-reproduced image.
20.SETUP button
Press to enter or exit the TV menu or DVD setup
mode.
21.
TITLE button
Displays the title menu.
22.
CLEAR button
Resets a setting.
23.
DISPLAY button
TV Mode:
Press to display the channel number on the
screen. If you press it again, the channel number
will disappear.
DVD Mode:
Displays the current status on the TV screen for
checking purposes.
24.
SEARCH MODE button
Press to locate a desired point.
25.
AUDIO button
Press to select a desired audio language or sound
mode.
26.
SUBTITLE button
Press to select a desired subtitle language.
27.
REPEAT button
Repeats playback of the current disc, title, chapter
or track.
28.
ANGLE button
Press to change the camera angle to see the
sequence being played back from a different angle.
29.A-B REPEAT button
Repeats playback of a selected section.
30.
RETURN button
Returns to the previous operation.
REAR VIEW
[Fig. 3]
TD250-Body 01.5.31 5:42 PM Page 9
–
10
–
EN
0C28
–
10
–
ANTENNA/CABLE CONNECTIONS
VHF/UHF COMBINED ANTENNA
The VHF/UHF Rod Antenna (not supplied) is detachable. Insert the stem of the antenna into the hole on the
upper-back portion of the TV/DVD. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna
to the ANT. terminal of the TV/DVD as shown in the diagram below. For the best reception, fully extend the
VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)
NOTE:
Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten
the pin as illustrated, then plug the pin into antenna terminal.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
LR
AUDIO OUT
1
DIGITAL OUT
COAXIAL
ANT.
ANT.
Bent pin
Cable Plug
(Needs to be straightened)
(Straight pin)
LR
AUDIO OUT
1
DIGITAL OUT
COAXIAL
ANT.
ANT.
NOTE:
The connection of an indoor antenna may not always give acceptable TV reception.
[Fig. 4]
[Fig. 5]
Rod Antenna
(Not supplied)
VHF/UHF Antenna
(Not supplied)
VHF/UHF
Combiner
(Not
supplied)
Flat twin-lead cable
UHF Antenna
(Not supplied)
VHF Antenna (Not supplied)
PREPARATION FOR USE
TD250-Body 01.5.10 6:54 PM Page 10
–
11
–
EN
0C28
–
11
–
CABLE WITH CONVERTER/
DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic
connection shown here.
LR
AUDIO OUT
W
1
DIGITAL OUT
COAXIAL
IN
OUT
ANT.
ANT.
[Fig. 7]
From Cable System
or Satellite Dish
75-ohm Coaxial
Cable
(Not supplied)
Satellite Box or
Cable Box (Not supplied)
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/DVD without a converter box.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building as close to the point of cable entry as practical.
LR
AUDIO OUT
W
1
DIGITAL OUT
COAXIAL
ANT.
ANT.
[Fig. 6]
From Cable System
75-ohm Coaxial
Cable (Not
supplied)
TD250-Body 01.5.10 6:54 PM Page 11
–
12
–
EN
0C28
–
12
–
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-)
markings.
3)Replace the cover.
Antenna/Cable Connections Continued on the Next Page.
CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on an another source (VCR or video camera), use the audio/video input
jacks on the front of the TV/DVD.
Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/DVD.
Then press the SELECT button until "VIDEO" appears on the screen.
NOTE:
•
When you connect a monaural VCR (another source) to this TV/DVD, connect the Audio output jack of the
monaural VCR (another source) to the AUDIO L jack of this TV/DVD. The audio will output in both L and
R channel equally.
L-AUDIO-RVIDEO
[Another source]
To the audio
output jacks
Audio/Video
coaxial cable
(not supplied)
etc.
To the video
output jack
[Front of the TV/DVD]
[Fig. 8]
TD250-Body 01.5.10 6:54 PM Page 12
–
13
–
EN
0C28
–
13
–
CONNECTING TO A STEREO SYSTEM (for DVD)
LR
AUDIO OUT
1
DIGITAL OUT
COAXIAL
ANT.
To Right (red) and Left (white)
AUDIO OUT jacks
(only DVD AUDIO OUT)
Stereo system
To ANALOG AUDIO INPUT jacks
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the
TV/DVD.
•
The AUDIO output jacks (red/white) on the rear panel serve to give out DVD sound, not TV sound and
external input sound.
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD)
Use an audio coaxial digital cable (commercially available) for the audio connections.
NOTES:
•
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•
Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD using
incorrect settings may generate noise distortion, and may also damage the speakers.
•
When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and
you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
LR
AUDIO OUT
DIGITAL OUT
COAXIAL
ANT.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To COAXIAL DIGITAL
AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 9]
[Fig. 10]
TD250-Body 01.5.10 6:54 PM Page 13
–
14
–
EN
0C28
–
14
–
CONNECTING TO A DOLBY DIGITAL DECODER
OR DTS DECODER (for DVD)
If using this TV/DVD to play back a TV/DVD in a 5.1 channel Dolby Digital surround or DTS surround for-
mat, the TV/DVD outputs a Dolby Digital or DTS data stream from its COAXIAL digital audio out jack. By
hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambi-
ence with powerful and high-quality surround sound of a professional standard such as can be heard in movie
theaters.
Use audio coaxial digital cables (commercially available) for the audio connections.
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•
If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
•
If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.
•
Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for
audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion,
and may also damage the speakers.
•
When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and
you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
LR
AUDIO OUT
1
DIGITAL OUT
COAXIAL
ANT.
Front speaker
(left)
Center
speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
To COAXIAL DIGITAL
AUDIO INPUT jack
Dolby Digital
or DTS decoder
Manufactured under license from Dolby
Laboratories.“Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories. Confidential Unpublished
Works. ©1992-1997 Dolby Laboratories, Inc.
All rights reserved.
“DTS”and “DTS Digital Out”are trademarks
of Digital Theater Systems, Inc.
[Fig. 11]
TD250-Body 01.5.10 6:54 PM Page 14
–
15
–
EN
0C28
–
15
–
LANGUAGE SELECTION
If you want to change the language of the on-screen
menu, follow the procedure below.
1
Press the SETUP button so that the
setup display appears on the TV
screen.
2
Press the Arrow K or L button to
point to "LANGUAGE".
3
Select "ENGLISH", "ESPAÑOL" = Spanish or
"FRANÇAIS" = French by using the Arrow B or s
button.
4
Press the SETUP button to exit the setup.
NOTE: An on-screen display language must be
selected each for the TV mode and DVD mode.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL PRESETTING
To preset a channel or to change a preset channel,
follow the procedure below.
1
Press the SETUP button so that the
setup display appears on the TV
screen.
2
Press the Arrow K or L button to
point to "CHANNEL SET". Then,
press the Arrow B button.
3
Press the Arrow K or L button to
point to "AUTO MEMO". Then,
press the Arrow B button.
The tuner scans and memorizes all
active channels in your area.
•
The TV distinguishes between standard TV chan-
nels and cable channels.
•
When AUTO MEMO action is completed, the low-
est memorized channel reappears on the screen.
•
When you press the Arrow K or L button after
selecting AUTO MEMO, the tuner will stop at the
memorized channels only.
•
The TV/VCR may memorize TV channels as
CATV channels if reception conditions are poor. If
this happens, try the AUTO MEMO action again
when reception conditions are better.
[ADD/DELETE FUNCTION]
1)Press the SETUP button so that the setup display
appears on the TV screen.
2)Press the Arrow K or L button
to point to "CHANNEL SET".
Then, press the Arrow B button.
3)Press the Arrow K or L button
to point to "ADD/DELETE".
Then press the Arrow B button.
4)Use the Arrow K or L button to
select the channel you wish to
put into memory or to erase from memory.
NOTE: The display will return to the screen in
about 10 seconds. Perform "ADD/DELETE" func-
tion while this display appears on the screen.
•
Press the Arrow B or s button to light up the
channel number in LIGHT BLUE if you wish to
add the channel into memory.
•
Press the Arrow B or s button to light up the
channel number in LIGHT RED if you wish to
erase the channel from memory.
5)Press the SETUP button to exit the setup.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ADD/DELETE
AUTO MEMO
ADD/DELETE
AUTO MEMO
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
Getting started
1
Connect the power cord to a standard AC outlet.
NOTE: If some digits appear in the corner of the
screen, press the POWER button without unplugging
the power cord.
2
Press the POWER button to turn on the TV/DVD.
3
Press the SELECT button on the remote control until
channel number or "TV" appears on the screen.
Then press the TV button.
TV SECTION
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
SET UP FOR USE
TD250-Body 01.5.10 6:54 PM Page 15
–
16
–
EN
0C28
–
16
–
WATCHING A TV PROGRAM
1
Select the desired channel with the CH(annel) K or
L button.
2
Adjust the volume to the desired listening level using
the VOL(ume) K or L button.
3
Adjust picture controls for a natural looking image.
(See "PICTURE ADJUSTMENT".)
Note: Suppose that the TV/DVD is shut off or in any
other mode than TV. Press the CHANNEL K or L
button on the TV/DVD, and the TV/DVD will be in
the TV mode to watch television.
SELECTING THE SLEEP TIMER
The sleep timer function enables you to shut off the
power without pressing the POWER button after a
desired time period.
1
Press the SLEEP button on the remote control.
2
You may change the sleep time
with pressing the SLEEP button on
the remote control repeatedly. The
timer is set up to 90 minutes, 10
minutes each time the SLEEP button is pushed. (The
timer display counts up and sleep timer will be dis-
played on the screen when you press the SLEEP but-
ton on remote control.)
NOTES:
•
When you disconnect the unit from the AC outlet,
or if you have a power failure, the sleep time will
be lost.
•
When the TV mode is changed to the DVD mode,
the sleep time will be lost.
SLEEP 10
To cancel the sleep timer:
Press the SLEEP button repeatedly until "SLEEP 0"
is displayed.
CLOSED CAPTION
This TV can receive C1 and C2 of Caption and Text.
CAPTION MODE
1)Characters can be displayed on the TV screen when
the received broadcast signal contains the Caption
Signals.
2)Paint-on mode: Displays input characters on the
screen immediately.
Pop-on mode: Once characters are stored in mem-
ory, it is displayed all at once.
Roll-up mode: Displays the characters continuous-
ly by scrolling (max. 4 lines)
NOTE: If the CAPTION C1 or C2 is selected but the
caption signal is not included, characters will not be
displayed.
TEXT MODE
1)Displays the text on the screen by scrolling (max. 7
lines)
2)If the received broadcast signal does not contain
the caption or text signal, no change will occur.
NOTES:
1)When your TV receives a special effects playback
signal (i.e., Search, Slow, Still) from a VCR’s
video output channel (CH3 or CH4), your TV may
not display the correct caption or text.
2)Captions and texts may not match the TV voice
exactly.
3)Interference may cause the closed caption system
not to function properly.
4)The caption or text characters will not be displayed
while the setup display or function’s display is
shown.
OPERATIONS
DEGAUSSING
Magnetism from nearby appliances might affect the
color of the TV picture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct,
disconnect power
cord from AC outlet then reconnect it after 30 minutes.
TD250-Body 01.5.10 6:54 PM Page 16
–
17
–
EN
0C28
–
17
–
5)If you see this screen!!
If your TV displays a black box on the screen, this
means that your TV is set to TEXT mode. To clear
screen, select CAPTION C1, C2 or CAPTION
[OFF].
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV programs,
movies, news, prerecorded tapes, etc. with either a
dialogue caption or text display added to the pro-
gram.
1
Press the SETUP button so that the setup display
appears on the TV screen.
2
Press the Arrow K or L button to point to "CAP-
TION".
3
Press the Arrow B or s button to select the mode
you wish.
4
When done, press the SETUP button to exit the
setup.
: Press the Arrow
B or s
button.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [ C1]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [ C2]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [ T1]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [ T2]
PICTURE ADJUSTMENT
GAME MODE
Set to the most suitable position for TV GAME.
[B] : ON
[s] : OFF
BRIGHT
Adjust until the whitest parts of the picture are as
bright as you prefer.
[B] : increase brightness
[s] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[B] : increase contrast
[s] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[B] : be brilliant color
[s] : be pale color
TINT
Adjust to obtain natural skin tones.
[B] : greenish tone
[s] : reddish tone
NOTES:
•
In the above steps, the picture adjustment display
will disappear from the TV screen after about 10
seconds unless you press any buttons, even though
you may not be finished. Press the SETUP and
Arrow B button so that "PICTURE" mode is
selected. Then, press the Arrow K or L button
repeatedly until the display returns to the screen.
•
If you adjust the other Picture control after you set
the Game mode to [ON], the Game mode is set to
[OFF] automatically. If you want to set the Game
mode, reset it to [ON].
[ ]
GAME MODE
[ ]
OFF ON
[ ]
BRIGHT
[ ]
[ ]
CONTRAST
[ ]
[ ]
COLOR
[ ]
[ ]
TINT
[ ]
: Press the Arrow ▲ or ▼ button.
1
Press the PICTURE button.
2
Select the feature you wish to adjust with the Arrow
K or L button and adjust it with the Arrow B or s
button.
TD250-Body 01.5.10 6:54 PM Page 17
–
18
–
EN
0C28
–
18
–
V-CHIP SET UP
V-CHIP enables parents to prevent their children
from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except
for news and sports programs, unedited movies on
premium cable channels, and Emergency Broadcast
System signals), then denies access to programming
if the program's rating meets the limitations you
select. In this case, "PROTECTED PROGRAM by
..." message appears on the TV screen. You can
watch the protected program by entering access code
(default 0000).
To block ratings, follow the steps below.
•
Programming may be rated by the Motion Picture
Association of America (MPAA) or according to
the Television Parental Guidelines. In order to
block any inappropriate programming, set your
limits in both places (MPAA RATING and TV
RATING).
•
You cannot access the menu when the "PROTECT-
ED PROGRAM by ..." message appears. In this
case, change to the unblocked channel, then press
the SETUP button.
[MPAA RATING SET UP]
1
Press the SETUP button so that the setup display
appears on the TV screen.
2
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
3
Use the number buttons to enter 4-
digit access code. The default code
is 0000.
4
Press the Arrow K or L button to
point to "MPAA RATING". Then,
press the Arrow B button.
5
Press the Arrow K or L button to
point to your desired item.
Then, press the Arrow B button to
select [BLOCK] or [VIEW].
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV RATING
MPAA RATING
CHANGE CODE
•
When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.
•
When you turn "G" to [BLOCK] or [VIEW], the
all ratings will turn to [BLOCK] or [VIEW] auto-
matically.
•
When you turn "X" to [VIEW], the all ratings will
turn to [VIEW] automatically.
5
Press the SETUP button to exit the setup.
[TV RATING SET UP]
1
Press the SETUP button so that the setup display
appears on the TV screen.
2
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
3
Use the number buttons to enter 4-
digit access code. The default code
is 0000.
4
Press the Arrow K or L button to
point to "TV RATING". Then,
press the Arrow B button.
4
Press the Arrow K or L button to
point to your desired item. Then,
press the Arrow B button to select
[BLOCK] or [VIEW].
<Selection> <Rating Category Explanations>
• G: General Audience
• PG: Parental Guidance suggested.
• PG-13: Unsuitable for children under 13
• R: Restricted; under 17 requires
accompanying parent or adult
guardian
• NC-17: No one under 17 admitted
• X: Mature audience only
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ACCESS CODE
- - - -
TV RATING
MPAA RATING
CHANGE CODE
G [VIEW]
PG
[VIEW]
PG-13
[VIEW]
R
[BLOCK]
NC-17
[BLOCK]
X
[BLOCK]
ACCESS CODE
- - - -
TV-Y
[VIEW]
TV-Y7 ( )
[VIEW]
TV-G
[VIEW]
TV-PG
( )
[VIEW]
TV-14
( )
[VIEW]
TV-MA ( )
[VIEW]
TD250-Body 01.5.10 6:54 PM Page 18
–
19
–
EN
0C28
–
19
–
•
When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.
•
When you turn "TV-Y" to [BLOCK] or [VIEW],
the all ratings will turn to [BLOCK] or [VIEW]
automatically.
•
When you turn "TV-MA" to [VIEW], the all rat-
ings will turn to [VIEW] automatically.
When you select TV-Y7, TV-PG, TV-14, or TV-MA
and you press the Arrow B button, the sub-ratings
will appear on the TV screen.
If you select the rating category (example: TV-PG)
and turn it [BLOCK] or [VIEW], the sub-ratings
(example: V for Violence) will turn [BLOCK] or
[VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW]
individually when the rating category is set to
[BLOCK]. To set the sub-ratings individually, follow
the steps below.
•
When you select [TV-Y7]:
Press the Arrow K or L button
to select "FV" (Fantasy
Violence). Then, press the Arrow
B button to select [BLOCK] or
[VIEW].
•
When you select [TV-PG],
[TV-14] or [TV-MA]:
Press the Arrow K or L button
to select "D"(Suggestive
Dialog), "L"(Coarse Language),
"S"(Sexual Situation), or
"V"(Violence). Then, press the
Arrow B button to select [BLOCK] or [VIEW].
NOTE: When you select [TV-MA], "D" does not
appear on the TV screen.
•
The sub-ratings which set to [BLOCK] appears
next to the rating category in the TV RATING
menu.
5
Press the SETUP button to exit the setup.
<Selection> <Rating Category Explanations>
• TV-Y: Appropriate for all children
• TV-Y7: Appropriate for children seven and
older
• TV-G: General Audience
• TV-PG: Parental Guidance suggested.
• TV-14: Unsuitable for children under 14
• TV-MA: Mature audience only
TV-Y7
[BLOCK]
FV
[BLOCK]
TV-PG
[BLOCK]
D
[BLOCK]
L
[BLOCK]
S
[BLOCK]
V
[BLOCK]
TV-Y
[VIEW]
TV-Y7 (
)
[VIEW]
TV-G
[BLOCK]
TV-PG
(DLSV)
[BLOCK]
TV-14
(DLSV)
[BLOCK]
TV-MA (
LSV)
[BLOCK]
[CHANGE ACCESS CODE]
To change access code, follow the steps.
1
Press the SETUP button so that the setup display
appears on the TV screen.
2
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
3
Use the number buttons to enter 4-
digit access code. The default code
is 0000.
4
Press the Arrow K or L button to
point to "CHANGE CODE". Then,
press the Arrow B button.
5
Use the number buttons to enter
your desired access code in the
NEW CODE space. Then enter the
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.
•
If you enter wrong code, repeat
step 5, making sure you enter
the same new code exactly in
the confirm code space.
6
Press the SETUP button to exit the setup.
Note:
•
If you unplug the power code or power failure
occures, the changed access code will be lost and
will return to default (0000). Change your access
code again as necessary.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ACCESS CODE
- - - -
TV RATING
MPAA RATING
CHANGE CODE
NEW CODE
CONFIRM CODE
- - - -
- - - -
NEW CODE
CONFIRM CODE
x x x x
- - - -
TD250-Body 01.5.10 6:54 PM Page 19
–
20
–
EN
0C28
–
20
–
ABOUT THE DISCS
The following discs can be played back on this DVD
player.
This player conforms to the NTSC color system. You can-
not play discs recorded in other color systems such as
PAL or SECAM.
¡Some discs include region codes as shown below.
¡The number inside the symbol refers to a region of the
world, and a disc encoded in a specific region format
can only be played back on DVD players with the same
region code.
The following discs cannot be played back on this
DVD player.
¡
DVD with region codes other than 1 or ALL.
¡
DVD-ROM
¡
DVD-RAM (Never play back, otherwise mal-
function may result.)
¡
CD-ROM
¡
VSD
¡
CDV (Only plays back the audio part.)
¡
CD-G (Only plays back the sound.)
¡
CD-R
(Never play back, otherwise malfunction may
result.)
¡
CD-I
(Never play back, otherwise malfunction may
result.)
¡
Photo CD
(Never play back, otherwise malfunction may
result.)
¡
Video CD
(Never play back, otherwise malfunction may
result.)
Any other discs without compatibility indications
PLAYABLE DISCS
DVD
Video
12 cm
12 cm
Approx. 4 h
(single-sided)
Approx. 8 h
(double-sided)
Approx. 80 min
(single-sided)
Approx. 160 min
(double-sided)
20 min
8 cm
8 cm
(singles)
Logo
Maximum
Playback Time
ContentsDisc Type
Sound
and
Pictures
Audio
CD
Disc Size
Sound
74 min
[
DVD
]
Data on a DVD is divided into sections called "titles", and
then into subsections called "chapters", each of which is
given a title or chapter number. Playback conditions are
preset on some DVD video discs, and these playback con-
ditions take priority over user operations on this player. If
a function you selected do not run as desired, refer to the
manual accompanying the disc.
DISC TYPES
[
AUDIO CD
]
Data on an audio CD is divided into sections called
“tracks”, each of which is given a track number.
DVD SECTION
TD250-Body 01.5.10 6:54 PM Page 20
–
21
–
EN
0C28
–
21
––
21
–
PLAYING A DVD VIDEO
OR AN AUDIO CD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
1 Press the POWER button.
¡
The power will turn on.
2 Press the OPEN/CLOSE button.
¡The disc loading tray will open.
3 Place a disc into the tray.
¡
Make sure the disc is sitting properly in the correct
recess, with the label side up.
4 Press the PLAY button.
¡
The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
You need to press the PLAY button only when the
tray has been closed by pressing the OPEN/CLOSE
button.
¡When you play back the DVD which a title menu is
recorded, the menu may appear on the screen. In this
case, refer to “USING THE TITLE MENU”.
5 Press the STOP button to stop play.
CDDVD
Notes
¡When the DVD mode has been switched to the TV
mode, the DVD mode shut down first and then TV
picture and sound appears in about 4 seconds.
Similarly, when the POWER button is pressed off in
the DVD mode, this mode shut down first and then
the set’s power is turned off.
¡A“prohibited icon” may appear at
the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD player
or the disc.
¡If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback.
¡With DVDs that use some titles for playback
program signals, playback may start from the second
title, or it may skip these titles.
PLAYING A DISC
USING THE DVD MENUS
Some DVDs contain their own menus, such as a
guidance menu which describes the contents of the
disc or a selection menu for sound, language and other
customized settings.
1 Press the DISC MENU button.
¡
The DVD menu will appear.
2 Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the
setting, and then press the ENTER button.
3 Playback will start from the selected title.
DVD
TD250-Body 01.5.10 6:54 PM Page 21
–
22
–
EN
0C28
–
22
––
22
–
USING THE TITLE MENU
With a DVD containing a title menu, you can select
desired titles from the menu.
1 Press the TITLE button.
¡
The title menu will appear.
2 Select the desired title.
¡
Press the arrow buttons (L/K/B/s) to change the
setting, and then press the ENTER button.
CALLING UP A MENU SCREEN
DURING PLAYBACK
For DVDs
¡Press the DISC MENU button to call up the DVD
menu.
¡Press the TITLE button to call up the title menu.
Note
¡Contents of menus and corresponding menu
operations may vary between discs. Refer to the
manual accompanying the disc for details.
DVD
PAUSING PLAYBACK OR
DISPLAYING A STILL PICTURE
1 Press the PAUSE button during playback.
¡
Playback will pause, with sound
muted.
2 Press the PLAY button to resume playback.
CDDVD
Pause F
Play B
STEPPING THROUGH FRAMES
1 Press the PAUSE button while playback is
paused.
¡
The next picture frame is dis-
played with sound muted each
time the button is pressed.
2 Press the PLAY button to resume playback.
DVD
Pause F
Play B
RESUMING PLAYBACK FROM
THE POINT WHERE
PLAYBACK STOPPED
1 Press the STOP button during playback.
¡
Playback will stop, and then
appear the resuming message at
the center.
2 Press the PLAY button. Playback will start
from the point where the previous playback
session was stopped.
Notes
¡Resuming playback is not available with some discs.
¡If you switch to the TV mode during DVD playback,
the resuming
¡It is possible to switch from the DVD play mode to
the TV mode. Even if the power is turned off, the
resume function enables to playback on from the
previously interrupted point. But note that the
Marker commands are not saved.
¡The resume function can be reset by pressing the
STOP button twice or by opening the disc loading
tray.
CDDVD
Press 'PLAY' to play from here
To play beginning, press 'STOP' first
and the 'PLAY'.
Play B
TD250-Body 01.5.10 6:54 PM Page 22
–
23
–
EN
0C28
–
23
––
23
–
FAST FORWARD/REVERSE
1 Press the FWD g or REV h button dur-
ing playback.
¡
For DVDs, pressing the FWD g or REV h
button cycles the playback speed in three steps.
¡For audio CDs, the playback speed is ×16 fixed.
2 Press the PLAY button to return to normal
playback speed.
CDDVD
1 Press the numeric buttons to enter the
desired track number.
¡
The selected track will be located, and playback will start.
You can also press the SEARCH MODE button, use
the numeric buttons to enter the track number, when
the track number is entered in the
entry box, playback of the desired
track will start automatically.
SLOW MOTION
1 Press the FWD g button while playback is
paused. (Sound remains muted.)
¡
Slow motion mode will be activated.
¡Pressing the FWD g button cycles the playback
speed in three steps. Select an appropriate speed
while referring to the speed indication on the screen.
2 Press the PLAY button to return to normal
playback speed.
Notes
¡Slow playback is not available with audio CDs.
¡The reverse of slow playback is not available.
DVD
STARTING FROM A DESIRED
TRACK
CD
TRICKS WITH THE SKIP BUTTONS (H, G)
If the SKIP button G is pressed during playback or
while playback is paused, the current track is
skipped and the next track is played. When the SKIP
button H is pressed once, the top of the current
track is located for replaying. When the SKIP button
H is pressed again while Within 2-second
playback, the previous track is located.
STARTING FROM A DESIRED
TIME COUNT
1 Press the SEARCH MODE button.
¡
Press the button twice for DVDs
or two times for audio CDs.
2 Press the numeric buttons to set the desired
time count.
¡
Example: 1 hour, 23 minutes and
30 seconds
1 → 2 → 3 → 3 → 0
Notes
¡In the case of DVD, Time Search in Title is effec-
tive. (But Time Search in Chapter is ineffective.)
¡In the case of CD, Time Search in Track is effective.
(But Time Search in the entire disc is ineffective.)
¡Playback from a desired time count is not available
with some discs.
¡Specific time playback is not available with some
discs or if the unit is in stop mode.
CDDVD
Search
Time _:__:__
Total Time 1:29:00
Search
Time _:__:__
Total Time 1:29:00
Search
Track: __ / 26
TD250-Body 01.5.10 6:54 PM Page 23
–
24
–
EN
0C28
–
24
––
24
–
PLAYING FROM A DESIRED
TITLE OR CHAPTER
You can also press the SEARCH MODE button, use
the numeric buttons to enter the chapter number.
¡
Perform the title search and the
chapter search after setting them on
the same screen at the same time.
Changeover by
K/L
buttons.
Note
¡Playback from a desired title or
chapter is not available with some
DVDs.
DVD
Search
Title : 1 / 4
Chapter:__ / 17
Search
Title : 1 / 4
Chapter:__ / 17
Search
Title : 1 / 4
Chapter:__ / 17
RANDOM (Audio CD)
1 Press the MODE button in stop mode.
¡The program setting menu screen will appear.
2 Press the MODE button again.
3 Press the PLAY button. Random playback
will then start.
Note
¡Program playback is not available during random
playback.
CD
Audio CD
Random
Exit : MODEStart : PLAY
REPEAT
1 Press the REPEAT button.
For DVDs
¡A single title or chapter is played back repeatedly.
¡Pressing the REPEAT button cycles the display on
the screen as follows.
For audio CDs
¡The whole disc or a single track is played back
repeatedly.
¡Pressing the REPEAT button cycles the display on
the screen through All, Repeat Track and Off.
CDDVD
If the REPEAT button is pressed once dur-
ing program/random playback, the pro-
gram/random playback is performed
repeatedly.
If the REPEAT button is pressed again, the
current track is played back repeatedly.
Notes
¡Repeat playback is not available with some discs.
¡The REPEAT setting will be cleared when moving
to other title, chapter or track.
TD250-Body 01.5.10 6:54 PM Page 24
–
25
–
EN
0C28
–
25
––
25
–
A-B REPEAT
You can define a section to be played back repeatedly.
1
Press the A-B REPEAT button during playback.
¡The starting point (A) will then be
selected.
2 Press the A-B REPEAT button again at the
end point (B) of the desired section.
¡
The selected section will be
played back repeatedly.
3 To exit A-B repeat playback, press the A-B
REPEAT button and set it to OFF.
Notes
¡With DVDs, the A-B repeat section can be set only
within the current title.
¡With audio CDs, the A-B repeat section can be set
within the current track.
¡A-B repeat is not available with some scenes in
DVD.
¡To cancel the A point which was set, press RETURN
button.
CDDVD
Repeat
[ A - ]
PROGRAM (Audio CD)
1
Press the MODE button in stop mode.
¡The program screen will appear.
CD
Audio CD
Program
Total
[Track]
– –
[Time]
0:00:00
Random
: MODE
Track 00 / 15
Exit
: RETURN
Start : PLAY
Delete
: CLEAR
Repeat
[ A - B ]
Repeat
[ off ]
2 Press the numeric buttons to enter the
desired track numbers.
¡
The total playback time for the
selected tracks will appear on the
TOTAL line.
3 Press the PLAY button.
¡
Playback will start in the programmed order.
¡While the program is being played back, the STOP
button works as follows.
¡Press the STOP button once and then the PLAY
button again, playback will restart from the point
where the STOP button was pressed. (Program
continued)
¡Press the STOP button twice and then the PLAY
button again, playback will restart from the first tune
in the program in the usual way. (Program
continued)
¡Press the STOP button three times and then the
PLAY button again, playback will restart from the
track in the usual way. (Program cleared)
Notes
¡Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡Numbers which exceed the number of tracks on the
disc in the tray are not accepted.
¡Playback from a desired track and random playback
are not available during program playback.
¡Program settings are cleared when the power is
turned off or the disc loading tray is opened.
¡If the track no. is once set in the program, the setting
cannot be changed.
02 05 07 14 01 09 13 10 03 11
08 04
Audio CD
Program
Total
[Track]
12
[Time]
0:47:29
Random
: MODE
Track 04 / 15
Exit
: RETURN
Start : PLAY
Delete
: CLEAR
TD250-Body 01.5.10 6:54 PM Page 25
–
26
–
EN
0C28
–
26
––
26
–
ZOOM PLAYBACK
(enlargement onscreen)
Images can be enlarged four times on the screen to
your taste.
Press the ZOOM button during playback.
¡
An image will be enlarged at the center of the
screen.
¡Press the ZOOM button again, and the image will be
back to the previous size.
DVD
SETTINGS
CHANGING THE AUDIO
LANGUAGE OR SOUND MODE
The DVD player has a function which allows you to
select the desired audio language and sound mode.
For DVDs
Press the AUDIO button during playback, and then
press the AUDIO button to select the desired audio
language.
¡
The audio language can be changed if multiple
languages are recorded on the DVD being played.
DVD
Notes
¡Pressing the Audio button may not work on some
DVDs with multiple audio languages (e.g. DVDs
which allow audio language setting on the disc
menu). Operation varies between discs, so refer to
the manual accompanying the disc.
¡If a desired language is not shown after pressing the
Audio button several times, the disc does not have
an audio source in that language.
¡The audio language resets to the one which has been
selected in the setup mode, every time the power is
turned on or discs are replaced. If that language is
not available on a disc, a language defined by the
disc is selected.
¡The screen display will disappear after about 5
seconds.
Zoom [on]
When the cursor (K/L/s / B) button is pressed
during zoom play, the part to be zoomed moves.
¡
The zooming frame can be moved from the center
.... 4 steps to the right. 4 steps to the left. 4 steps to
the top. 4 steps to the bottom.
Note
¡Zooming function does not work while operation
display screen is shown.
TD250-Body 01.5.10 6:54 PM Page 26
–
27
–
EN
0C28
–
27
––
27
–
CHANGING THE SUBTITLE
LANGUAGE
The DVD player has a function which allows you to
select the desired language for subtitles.
Press the SUBTITLE button during playback, and
then press the SUBTITLE button to select the
desired subtitle language.
¡
The subtitle language can be changed if the subtitles
are recorded in multiple languages on the DVD
being played.
¡The subtitle language cannot be changed if the
subtitles are recorded in a single language on the
DVD being played.
¡Pressing the SUBTITLE button cycles the subtitle
language from SUBTITLE 1, SUBTITLE 2 and all
the languages recorded through to off.
Notes
¡Some discs allow subtitle language setting on the
disc menu. (Operation varies between discs, so refer
to the manual accompanying the disc.)
¡If the desired language is not shown after pressing
the SUBTITLE button several times, the disc does
not have subtitles in that language.
¡The subtitle language resets to the one which has
been selected in the setup mode, every time the
power is turned on or discs are replaced. If that
language is not available on a disc, a language
defined by the disc is selected.
¡It may take time to display the subtitles in the
selected language.
¡The screen display will disappear after about 5
seconds.
¡When “Subtitle Not Available” appears onscreen, it
means no subtitle is recorded on the scene.
DVD
CHANGING THE CAMERA
ANGLE (Multi-Angle Pictures)
The DVD player has a function which allows you to
select the desired camera angle.
1
Press the ANGLE button during playback.
¡If the disc contains sequences recorded from differ-
ent camera angles, the angle icon ( ) will appear
at the top-right of the screen. You can change the
camera angle when the icon appears on the screen.
¡The camera angle cannot be changed if the disc does
not contain sequences recorded from different
camera angles.
2
Press the ANGLE button while the angle
number is shown on the screen.
Note
¡The screen display will disappear after about 5
seconds.
DVD
TD250-Body 01.5.10 6:54 PM Page 27
–
28
–
EN
0C28
–
28
––
28
–
CHANGING THE ON-SCREEN
DISPLAY
Audio CD
Play
Repeat
[Track]
Track
2
Play Mode
Normal
Time
[Track]
0:01:46
-0:03:27
Track 2 / 12
Time 0:05:13
Maker ...
Time Display Track
01 02 03 04 05 06 07 08 09 10
11 12
Playback Setup Window
[Track]
Elapsed time of the current track and
Remaining time of the current track.
[All]
Elapsed time of the current disc and
Remaining time of the current disc.
Current track number
Nomal playback
Programedplayback
Random playback
Current repeat status
Current playback status
Kind of disc in playbacking
Info. Window
Playback Setup Window (DVD)
Playback Setup Window (CD)
To exit the display (DVD and CD):
Press the RETURN button.
In the playback Setup Window, press the RETURN button to
change the present indication to the former one.
ITEM DISPLAY CONTENTS
Time Total time of the current title
SRS
TruSurround
The current setting (On/Off) is displayed.
Marker
Place the cursor and press the ENTER
button to activate the Marker function.
[Set the marker]
Using
K
/
L
button, position the cursor on
to the marker number shown as “Not
Set”. Press the ENTER button when the
screen to be reviewed appears.
Up to 5 points can be marked.
[Call back the marker]
Using
K
/
L
button, position the cursor on
to the marker number to be called back
and press the ENTER button.
[Clear the marker]
Using
K
/
L
button, position the cursor on
to the marker number to be cleared and
press the CLEAR button.
To clear all markers, place the cursor on
“All Clear Markers” and press the
ENTER button.
Chapter
Current chapter number / the number of
total chapters
Title
Current title number / the number of total
titles
Audio
Audio No., audio language / the number
of available audio languages in the disc
Subtitle
Subtitle No., subtitle language / the
number of available subtitle languages in
the disc
Off : Subtitle is not displays.
Not Available : Subtitle is not included.
Angle
Angle No. / total number of the angles
1/1 : Multi angle is not included in the
disc.
ITEM DISPLAY CONTENTS
Time Total time of the current track
Marker
Place the cursor and press the ENTER
button to activate the Marker function.
[Set the marker]
Using
K
/
L
button, position the cursor on
to the marker number shown as “Not
Set”. Press the ENTER button when the
screen to be reviewed appears.
Up to 5 points can be marked.
[Call back the marker]
Using
K
/
L
button, position the cursor on
to the marker number to be called back
and press the ENTER button.
[Clear the marker]
Using
K
/
L
button, position the cursor on
to the marker number to be cleared and
press the CLEAR button.
To clear all markers, place the cursor on
“All Clear Markers” and press the
ENTER button.
Track
Current track number / the number of
total tracks
Time Display
The time informations displays on the left
side of the screen (Track/All)
For DVDs
You can check the information about the disc by
pressing the DISPLAY button on the remote control.
For audio CDs and DVDs
1
Press the DISPLAY button, the display appears on the
screen.
2
For the selecting the item of the Playback Setup
Window, press the K
/
L
button to select the item,
then press the ENTER button.
For audio CDs
CDDVD
TD250-Body 01.5.10 6:54 PM Page 28
–
29
–
EN
0C28
–
29
––
29
–
1
Press the SETUP button.
¡The setup screen appears.
2 Press the K/L buttons to select Language,
and then press the ENTER button.
3 Press the K/L buttons to select an item, and
then press the ENTER button.
(Voice is played back in selected
language.)
(Subtitles are shown in selected
language.)
(The disc menu appears in select-
ed language.)
(The on-screen display appears in
selected language.)
4
Press the
K/L
buttons to select a desired
item, and then press the ENTER button.
¡If Other is selected on the Audio, Subtitle or Disc
Menu setting screen, the Language Code setting
screen will appear. Press the numeric buttons to
enter the desired language code while referring to
the list on page 25.
5 Press the SETUP button.
¡
The setup mode will be canceled and the ordinary
screen will appear.
Note
¡Language Setting for Audio and Subtitle is not avail-
able with some discs. Then use the Audio and
Subtitle button. Details are on pages 18 and 19.
Note
¡When you change the setup items, press the STOP
button if you are in playback mode.
CHANGING THE SETUP ITEMS
LANGUAGE SETTINGS
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Language Controls
Audio English
Subtitle English
Disc Menu English
Player Menu English
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Audio
Irish
Portuguese
Dutch
Other
_
.......
o
Language Controls
Audio English
Subtitle English
Disc Menu English
Player Menu English
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Language Controls
Audio English
Subtitle English
Disc Menu English
Player Menu English
Audio
Original
English
French
Spanish
p
o
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Language Controls
Audio English
Subtitle English
Disc Menu English
Player Menu English
Subtitle
Off
English
Spanish
French
p
o
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Language Controls
Audio English
Subtitle English
Disc Menu English
Player Menu English
Disc Menus
Original
English
French
Spanish
p
o
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Language Controls
Audio English
Subtitle English
Disc Menu English
Player Menu English
Player Menu
English
Français
Español
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
TD250-Body 01.5.10 6:54 PM Page 29
–
30
–
EN
0C28
–
30
––
30
–
4
Press the
K/L
buttons to select a desired
item, and then press the ENTER button.
5 Press the SETUP button.
¡The setup mode will be canceled and the ordinary
screen will appear.
1
Press the SETUP button.
¡The setup screen will appear.
2 Press the K/L buttons to select Display and
then press the ENTER button.
3 Press the K/L buttons to select an item, and
then press the ENTER button.
TV Aspect
(Default : 4:3 Pan & Scan)
4:3 Pan & Scan : Full height picture,
trimmed both sides
4:3 Letter Box : Wide screen with
black bars on top and bottom
Notes
• Some discs do not contain pan and scan images.
• Some discs do not contain letter box images.
On Screen Info (Default : On)
Display or not display the disc status
(Example “PLAYB”).
Angle Icon (Default : On)
Display or not display the Angle icon
on the screen.
Background Color (Default : Gray)
Select gray or blue
Auto Power Off (Default : On)
Set or not set to turn off after the
screen saver is started and no keys are
pressed for 30 minutes..
DISPLAY SETTINGS
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Display Controls
TV Aspect 4:3 Pan & Scan
On Screen Info
On
Panel Display Bright
Angle Icon On
p
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Display Controls
TV Aspect 4:3 Pan & Scan
On Screen Info
On
Angle Icon On
Background Color
Gray
TV Aspect
4:3 Pan & Scan
4:3 Letterbox
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Display Controls
TV Aspect 4:3 Pan & Scan
On Screen Info
On
Angle Icon On
Background Color
Gray
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
p
Display Controls
TV Aspect 4:3 Pan & Scan
On Screen Info
On
Angle Icon On
Background Color
Gray
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
p
Display Controls
On Screen Info On
Angle Icon On
Background Color
Gray
Auto Power Off On
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
o
Display Controls
On Screen Info On
Angle Icon On
Background Color Blue
Auto Power Off On
o
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
TD250-Body 01.5.10 6:54 PM Page 30
–
31
–
EN
0C28
–
31
––
31
–
Down Sampling (Default :
48kHz)
Set the output for the DVD
recorded in PCM 96kHz (96kHz
or 48kHz)
4
Press the
K/L
buttons to select a desired
item, and then press the ENTER button.
¡If PCM, Dolby Digital or DTS MPEG is selected on
the Digital Audio Out setting screen, press the K/L
buttons again to select a further item, and then press
the ENTER button.
Dolby Digital (Default : Off)
On : Output by Dolby Digital.
Set to On when the unit is con-
nected to Dolby Digital Decoder.
DTS (Default : Off)
On : Output DTS sound
Set to On when the unit is con-
nected to DTS Decoder.
MPEG (Default : Off)
On : Output by MPEG
Off : Convert the MPEG to PCM
Set to On when the unit is con-
nected to MPEG2 Decoder.
5
Press the SETUP button.
¡The setup mode will be canceled and the ordinary
screen will appear.
1
Press the SETUP button.
¡The setup screen will appear.
2 Press the K/L buttons to select Audio and
then press the ENTER button.
3 Press the K/L buttons to select an item, and
then press the ENTER button.
Digital audio out setting (Next
step)
Dynamic Range (Default : Off)
On : Dynamic range is available
¡This function is for controlling
the range of sound volume. By
compressing the range of sound
volume, it is possible not only to
suppress the output of loud
sound at night and but also to
raise the volume of low sound.
¡However, this function is effec-
tive only for the sound recorded
by Dolby Digital recording.
When the sound recorded by
Dolby Digital 5.1ch is outputted,
the sound is compressed auto-
matically even with this function
being set at “Off”.
Downmix Mode
(Default : Dolby Surround)
Dolby Surround: When the player
is connected to an audio compo-
nent that conforms to
Dolby Surround Pro Logic
STEREO: When the player is con-
nected to a normal audio compo-
nent
AUDIO SETTINGS
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Digital Audio Out
Dolby Digital Off
DTS On
MPEG Off
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
SSelect : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Digital Audio Out
Dolby Digital Off
DTS On
MPEG Off
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Digital Audio Out
Dolby Digital Off
DTS On
MPEG Off
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Audio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Digital Audio Out
Dolby Digital Off
DTS On
MPEG Off
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Audio ControlsAudio Controls
Digital Audio Out ...
Dynamic Range On
Downmix Mode Dolby Surround
Down Sampling 48kHz
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
TD250-Body 01.5.10 6:54 PM Page 31
–
32
–
EN
0C28
–
32
––
32
–
CONTROL LEVELS
¡
Level 8
DVD software of any grade (adult/general/children)
can be played back.
¡
Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
¡
Level 1
Only DVD software intended for children can be
played back, with those intended for adult and
general use prohibited.
Notes
¡With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
¡Record the password in case you forget it.
IF YOU FORGET THE PASSWORD
1) Open the tray.
2) Press the 1, 2, 3, 4, then DISPLAY button on the
remote control. the default setup screen will appear.
Then, press the ENTER button.
3) Disconnect the power once and reconnect, then
proceed the step 1 to 4 of the PARENTAL LOCK
again.
Note: If you proceed the above steps, ALL the
settings of the DVD player will be cleared. To use
the DVD player under the previous settings, set
each setting item all over again.
1
Press the SETUP button.
¡The setup screen will appear.
2 Press the K/L buttons to select Parental,
and then press the ENTER button.
3 Press the numeric buttons to enter the 4-
digit password, and then press the ENTER
button.
¡
When doing this for the first time, enter any 4 digits.
That number will be used as the password from the
second time onward.
¡By entering the password, you
can then change the control level
and password settings.
4
Press the
K/L
buttons to select an item, and
then press the ENTER button.
When Parental Level is selected
¡Press the K/L buttons to select an item from 8 to 1
and then press the ENTER button.
¡When Change is selected, press the numeric buttons
to enter the four digits password. Then press the
ENTER button.
5
Press the RETURN button.
¡The setup screen will appear.
PARENTAL LOCK
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Parental Contorols
Parental Level 7[NC-17]
Change
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Parental Level
5
4 [PG-13]
3 [PG]
2
Parental Contorols
Parental Level 7[NC-17]
Change
o
p
Select : / Set : ENTER
Cancel : Exit : SETUP
Language
Display
Audio
Parental
Parental Contorols
Parental Level 7[NC-17]
Change
Password
Enter current password
_ _ _ _
Select : / Set : ENTER
Cancel : Exit : SETUP
Password
Enter current password...
_ _ _ _
Language
Display
Audio
Parental
Select : / Set : ENTER
Cancel : Exit : SETUP
TD250-Body 01.5.10 6:54 PM Page 32
–
33
–
EN
0C28
–
33
––
33
–
1 Afar 4747
2 Abkhazian 4748
3 Afrikaans 4752
4 Amharic 4759
5 Arabic 4764
6 Assamese 4765
7 Aymara 4771
8 Azerbaijani 4772
9 Bashkir 4847
10 Byelorussian 4851
11 Bulgarian 4853
12 Bihari 4854
13 Bislama 4855
14 Bengali;Bangla 4860
15 Tibetan 4861
16 Breton 4864
17 Catalan 4947
18 Corsican 4961
19 Czech 4965
20 Welsh 4971
21 Danish 5047
22 German (GER) 5051
23 Bhutani 5072
24 Greek 5158
25 English (ENG) 5160
26 Esperanto 5161
27 Spanish (SPA) 5165
28 Estonian 5166
29 Basque 5167
30 Persian 5247
31 Finnish 5255
32 Fiji 5256
33 Faroese 5261
34 French (FRE) 5264
35 Frisian 5271
36 Irish 5347
37 Scots Gaelic 5350
38 Galician 5358
39 Guarani 5360
40 Gujarati 5367
41 Hausa 5447
42 Hindi 5455
43 Croatian 5464
44 Hungarian 5467
45 Armenian 5471
46 Interlingua 5547
47 Interlingue 5551
48 Inupiak 5557
49 Indonesian 5560
50 Icelandic 5565
51 Italian (ITA) 5566
52 Hebrew 5569
53 Japanese (JPN) 5647
54 Yiddish 5655
55 Javanese 5669
56 Georgian 5747
57 Kazakh 5757
58 Greenlandic 5758
59 Cambodian 5759
60 Kannada 5760
61 Korean (KOR) 5761
62 Kashmiri 5765
63 Kurdish 5767
64 Kirghiz 5771
65 Latin 5847
66 Lingala 5860
67 Laothian 5861
68 Lithuanian 5866
No. Language Country code
69 Latvian;Lettish 5868
70 Malagasy 5953
71 Maori 5955
72 Macedonian 5957
73 Malayalam 5958
74 Mongolian 5960
75 Moldavian 5961
76 Marathi 5964
77 Malay 5965
78 Maltese 5966
79 Burmese 5971
80 Nauru 6047
81 Nepali 6051
82 Dutch (DUT) 6058
83 Norwegian 6061
84 Occitan 6149
85 (Afan)Oromo 6159
86 Oriya 6164
87 Panjabi 6247
88 Polish 6258
89 Pashto;Pushto 6265
90 Portuguese 6266
91 Quechua 6367
92 Rhaeto-Romance 6459
93 Kirundi 6460
94 Romanian 6461
95 Russian 6467
96 Kinyarwanda 6469
97 Sanskrit 6547
98 Sindhi 6550
99 Sangho 6553
100 Serbo-Croatian 6554
101 Singhalese 6555
102 Slovak 6557
103 Slovenian 6558
104 Samoan 6559
105 Shona 6560
106 Somali 6561
107 Albanian 6563
108 Serbian 6564
109 Siswat 6565
110 Sesotho 6566
111 Sundanese 6567
112 Swedish 6568
113 Swahili 6569
114 Tamil 6647
115 Telugu 6652
116 Tajik 6653
117 Thai 6654
118 Tigrinya 6655
119 Turkmen 6657
120 Tagalog 6658
121 Setswana 6660
122 Tonga 6661
123 Turkish 6664
124 Tsonga 6665
125 Tatar 6666
126 Twi 6669
127 Ukrainian 6757
128 Urdu 6764
129 Uzbek 6772
130 Vietnamese 6855
131 Volapuk 6861
132 Wolof 6961
133 Xhosa 7054
134 Yoruba 7161
135 Chinese (CHI) 7254
136 Zulu 7267
No. Language Country code
DVD
LANGUAGE CODE LIST
TD250-Body 01.5.10 6:54 PM Page 33
–
34
–
EN
0C28
–
34
––
34
–
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. Before arranging for service, check these items. It could save your time and money.
Problem Corrective Action
Remote Control Doesn’t Work
•
Is TV/DVD plugged in?
•
Power at outlet?
•
Check batteries in Remote Control.
Bars On Screen
•
If outside antenna is being used, check for broken wire.
•
Check for local interference.
Picture Distorted or Blurred
•
Try a new channel, if OK, then possible station trouble.
•
If outside antenna is being used, check for broken wire.
Picture Rolls Vertically
•
Try a new channel, if OK, then possible station trouble.
Lines or Streaks in Picture
•
If outside antenna is being used, check for broken wire.
•
Check for local interference.
No Color
•
Try a new channel, if OK, then possible station trouble.
•
Is antenna connected to terminal on the back of the set?
•
If outside antenna is being used, check for broken wire.
•
Adjust COLOR control.
Poor Reception on Some Channels
•
Try a new channel, if OK, then possible station trouble.
Ghosts in Picture
•
Is antenna connected to terminal on the back of the set?
•
If outside antenna is being used, check for broken wire.
•
Check for local interference.
Weak Picture
•
Try a new channel, if OK, then possible station trouble.
•
Is antenna connected to terminal on the back of the set?
•
If outside antenna is being used, check for broken wire.
•
Adjust CONTRAST & BRIGHT control.
Sound OK, Picture Poor
•
Try a new channel, if OK, then possible station trouble.
•
Is antenna connected to terminal on the back of the set?
•
If outside antenna is being used, check for broken wire.
•
Check for local interference.
•
Adjust CONTRAST & BRIGHT control.
Picture OK, Sound Poor
•
Try a new channel, if OK, then possible station trouble.
•
Check for local interference.
No Picture or Sound
•
Try a new channel, if OK, then possible station trouble.
•
Is TV/DVD plugged in?
•
Power at outlet?
•
Is TV/DVD’S POWER button on?
•
Is antenna connected to terminal on the back of the set?
•
If outside antenna is being used, check for broken wire.
•
Turn off with POWER button and then turn it on after about a minute.
TV
TROUBLESHOOTING GUIDE
TD250-Body 01.5.10 6:54 PM Page 34
–
35
–
EN
0C28
–
35
––
35
–
Closed Caption Problem Possible Remedy
My TV is showing captions • You are watching a live broadcast and spelling errors made by the
that are misspelled. • closed captioning production company may pass through uncorrected.
• A prerecorded program will not show any misspelled words because
• of the normal time available for editing the captions.
My TV will not show the text • Captions that are delayed a few seconds behind the actual dialogue
in its entirety or there is a delay of • are common for live broadcast. Most captioning production companies
what is being said. • can display a dialogue to a maximum of 220 words per minute. If a
• dialogue exceeds that rate, selective editing is used to insure that the
• captions remain up-to-date with the current TV screen dialogue.
My captions are scrambled with • Interference caused by building, power lines, thunderstorms, etc.
white boxes on the TV screen. • may cause scrambled or incomplete captions to appear.
My program guide listed a TV show
• Broadcasters may at times use a time compression process to the
as being closed captioned but none • actual program so that additional advertising time can be given.
of the captions were displayed. • Since the decoder cannot read the compressed information,
• captions will be lost.
My TV screen shows a black box • You are in the TEXT mode. Select CAPTION mode or CAPTION
on certain channels. • [OFF].
TD250-Body 01.5.10 6:54 PM Page 35
–
36
–
EN
0C28
–
36
––
36
–
Symptom Cause Remedy
No power.
•
Loose power plug.
•
Insert the power plug firmly into the wall out-
let.
The player does not
•
The remote control is not aimed
•
Aim the remote control directly at the sensor
respond to the
•
at the sensor on the TV/DVD.
•
on the TV/DVD.
remote control.
•
Obstacles present between the
•
Remove the obstacles from the signal path.
•
remote control and the sensor.
•
The remote control is too far
•
Use the remote control within 7m of
•
away from the TV/DVD.
•
the TV/DVD.
•
Dead batteries.
•
Replace the batteries.
No picture
•
Loose video connection.
•
Connect the video cables firmly.
•
Wrong disc.
•
Insert a correct video disc that plays on this
•
TV/DVD.
Disc cannot be
•
No disc.
•
Insert a disc.
played
•
Dirty disc.
•
Clean the disc.
•
Disc is placed upside down.
•
Place the disc correctly, with the label side up.
•
Parental lock is active.
•
Cancel the parental lock or change the control
•
level.
No sound
•
Loose audio connection.
•
Connect the audio cables firmly.
•
The power of the connected
•
Turn the power of the audio component on.
•
audio component is off.
•
Wrong audio output settings.
•
Correct the audio output settings.
•
Wrong input settings on the
•
Correct the input settings on the audio
•
connected audio component.
•
component.
Distorted picture
•
Immediately after playing,
•
There are some cases where pictures may be
•
press fast forward or in reverse.
•
slightly distorted, which are not a sign of a
•
malfunction.
Audio or subtitle
•
The selected language is not
•
No malfunction.
language does not
•
available for audio or subtitles
match the setup.
•
on the DVD.
The camera angle
•
The DVD does not contain
•
No malfunction.
cannot be changed.
•
sequences recorded from
•
different camera angles.
Audio or subtitle
•
The DVD does not contain
•
No malfunction.
language cannot be
•
audio source or subtitles in the
changed.
•
selected language.
"Prohibited icon"
•
That operation is prohibited by
•
No malfunction.
appears on the
•
the TV/DVD or disc.
screen, prohibiting
an operation.
CD sound dropout
•
Scratched disc
•
Replace the disc with unscratched one.
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
NOTES:
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Manual for details on correct operations.
•
Playback from a desired track and random playback are not available during program playback.
If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the
player, consulting the following checklist.
DVD
TD250-Body 01.5.10 6:54 PM Page 36
–
37
–
EN
0C28
CABINET CLEANING
•
Wipe the front panel and other exterior surfaces of
the TV/DVD with a soft cloth immersed in luke-
warm water and wrung dry.
•
Never use a solvent or alcohol. Do not spray insec-
ticide liquid near the TV/DVD. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
SERVICING
•
Should your TV/DVD become inoperative, do not
try to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord, and please call our help line at 1-800-
968-3429, to locate an Authorized Service Center.
IF THE LASER OPTICAL PICKUP UNIT IS DIRTY
•
If the player still does not perform properly when it is operated while referring to the relevant sections and to
"TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult
your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
•
Use discs which have the following logos on them.
(Optical audio digital discs.)
•
Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
•
Always store the disc in its protective case when it
is not used.
DISC HANDLING
•
To clean-off, use a soft cloth.
•
Do not use a hard cloth since this will mar the disc.
•
Wipe the disc in a straight line from center to edge.
•
Never wipe with a circular motion.
•
Do not use detergent or abrasive cleaning agents.
MAINTENANCE
TD250-Body 01.5.10 6:54 PM Page 37
–
38
–
EN
0C28
Television system: NTSC-M
TV Standard
Closed caption system: §15.119/FCC
Channel coverage:
VHF: 2 ~ 13
UHF: 14 ~ 69
CATV: 2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System: 181 channel
frequency synthesized
tuning system
Channel access: Direct access keyboard,
programmable
scan and up/down
Product type: DVD Player
Discs: DVD video, Audio CD
Output signal format: NTSC color
Frequency response
(out put jack)
DVD (linear sound): 20 Hz to 22 kHz
(sample rate: 48 kHz)
20 Hz to 44 kHz
(sample rate: 96 kHz)
CD: 20 Hz to 20 kHz
Signal-to-noise ratio
(S/N ratio)(out put jack)
CD: 100 dB (EIAJ)
Dynamic range
(out put jack)
DVD (linear sound): 85 dB
CD: 84 dB (EIAJ)
Total distortion factor
CD: 0.07% (EIAJ)
Wow and flutter: Below the measurement
limitation (+/-0.001%
W PEAK) (EIAJ)
•
Designs and specifications are subject to change without notice and without our legal obligation.
•
If there is a discrepancy between languages, the default language will be English.
TV
DVD
GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS
Sound output: 2 speakers, 1W, 8 ohm
OTHER SPECIFICATIONS
Terminals
Antenna input: VHF/UHF/CATV
75 ohm unbalanced (F-type)
Video input: RCA connector [ 1
Audio L/R input: RCA connector [ 2
Headphone: 1/8” stereo (3.5 mm)
Coaxial digital
audio output
(only DVD): One pin jack,
500m Vpp (75 ohm)
Analog audio L/R
output (only DVD): RCA connector [ 2
Remote control: Digital encoded
infrared light system
Operating
temperature: 5ºC to 40ºC
(41ºF~104ºF)
Power requirements: AC 120V, 60Hz
Power consumption
(Maximum): 90W
Picture tube: 19"
Dimensions: H:19-5/8” (498mm)
W:19-3/16” (487mm)
D:18-21/32” (474mm)
Weight: 41.9 lbs (19kg)
Accessories: Remote Control Unit with
2"AA"batteries
Owner’s Manual
SPECIFICATIONS
TD250-Body 01.5.10 6:54 PM Page 38
–
39
–
ES
0C28
INDICE
■ CONTROLES DE OPERACIÓN Y FUNCIONES. . . . . 39
PANEL FRONTAL DEL TELEVISOR/DVD. . . . . . . . . . 39
MANDO A DISTANCIA. . . . . . . . . . . . . . . . . . . . . . . . . 39
VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 40
CONEXIONES DE ANTENA/TELEVISIÓN
POR CABLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
INSTALACIÓN DE LAS PILAS. . . . . . . . . . . . . . . . . . . 41
CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 41
CONEXIÓN A UN SISTEMA ESTÉREO (Para DVD) . . 41
CONEXIÓN A UN AMPLIFICADOR EQUIPADO CON
TOMAS DE ENTRADA DIGITAL, PLATINA MD O
PLATINA DAT (Para DVD) . . . . . . . . . . . . . . . . . . . . . . 41
CONEXIÓN A UN DECODIFICADOR DOLBY DIGITAL
O A UN DECODIFICADOR DTS (Para DVD) . . . . . . . . 41
TV SECTION
■
PREPARACIÓN PARA LA UTILIZACIÓN
. . . . . . . . . . . . 42
SELECCIÓN DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 42
PREAJUSTE DE CANALES. . . . . . . . . . . . . . . . . . . . . . 42
DVD SECTION
■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 43
REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
CONTROLES DE
OPERACIÓN Y FUNCIONES
PANEL FRONTAL DEL
TELEVISOR/DVD
Consulte la figura 1 de la página 8
MANDO A DISTANCIA
Consulte la figura 2 de la página 8
VISTA POSTERIOR
Consulte la figura 3 de la página 9
1.Bandeja de carga del disco
2.Toma de entrada VIDEO
Conecte aquí la toma de salida de vídeo de una
videocámara o de una videograbadora.
3.
Tomas de entrada AUDIO L/R
Conecte aquí las tomas de salida de audio de una
videocámara o de una videograbadora.
4.
Botón POWER
Púlselo para conectar y desconectar la alimentación.
5.
Botones VOLUME K/L
Púlselos para controlar el nivel del volumen para
el DVD y el televisor.
6.
Botones CHANNEL K/L
Púlselo para seleccionar el canal memorizado.
Púlselo para cambiar a un modo de televisor cuan-
do modo de DVD.
7.
Ventanilla del sensor del mando a distancia
8.Botón STOP
Detiene la operación del disco.
9.
Botón REV
Reproduce rápidamente hacia atrás hasta un
punto deseado.
10.
Botón PLAY
Inicia la reproducción del contenido del disco.
Púlselo para cambiar a un modo de DVD cuando
modo de televisor.
11.
Botón FWD
Reproduce rápidamente hacia adelante hasta un
punto deseado.
12.
Botón PAUSE
Hace una pausa en la operación del disco.
13.
Botón OPEN/CLOSE
Púlselo para insertar discos en la bandeja o
retirarlos de ella.
14.
Toma HEADPHONE
Para conectar auriculares (no suministrados) y
escuchar en privado.
15.
Botón MODE
Activa el modo de reproducción programada o el
modo de reproducción aleatoria.
16.
Botones de números
Modo del televisor:
Pulse dos dígitos para tener acceso directamente
al canal deseado.
Recuerde pulsar "0" antes de elegir un canal de
un solo dígito.
Botón +100
Púlselo para seleccionar canales de televisión por
cable cuyo número sea igual o superior al 100.
Modo DVD:
Púlselo para introducir el número deseado.
Botón +10
Púlselo para introducir los números deseados
cuyo número sea igual o superior al 10.
17.
Botón SLEEP
Pulse el botón SLEEP para visualizar el tempo-
rizador para dormir y activar la función. La hora
de apagado puede determinarse por el número de
veces que usted pulsa el botón. (0, 10, 20, 30, 90,
0 minutos)
18.
Botones SKIP
Salta capítulos o pistas hasta un punto deseado.
19.
Botón ZOOM
Amplia parte de una imagen de DVD reproducida.
20.Botón SETUP
Púlselo para activar o salir del modo de menús de
televisor o preparación de DVD.
21.
Botón TITLE
Visualiza el menú de títulos.
22.
Botón CLEAR
Repone un ajuste.
23.
Botón DISPLAY
TD250UAES 01.5.31 5:40 PM Page 39
–
40
–
ES
0C28
Modo del televisor:
Púlselo para visualizar el número del canal en la
pantalla. Si lo pulsa de nuevo, el número del canal
desaparecerá.
Modo de DVD:
Visualiza el estado actual en la pantalla del televi-
sor con fines de comprobación.
24.
Botón SEARCH MODE
Púlselo para localizar un punto deseado.
25.
Botón AUDIO
Púlselo para seleccionar un idioma de audio o un
modo de sonido deseado.
26.
Botón SUBTITLE
Púlselo para seleccionar un idioma de subtítulos
deseado.
27.
Botón REPEAT
Repite la reproducción del disco, título, capítulo o
pista actual.
28.
Botón ANGLE
Púlselo para cambiar el ángulo de la cámara y
verde, desde un ángulo diferente, la secuencia que
está siendo reproducida.
29.
Botón A-B REPEAT
Repite la reproducción de una sección seleccionada.
30.Botón RETURN
Para volver a la operación anterior.
31.
Botón ENTER
Púlselo para establecer un ajuste.
32.
Botones de flechas
Modo de televisor:
Púlselo para seleccionar un modo de ajuste desde
el menú que aparece en la pantalla del televisor.
Púlselo para seleccionar o ajustar desde un menú
particular.
Modo de DVD:
Se utiliza cuando se hacen ajustes mientras se
observa la visualización en una pantalla de televisor.
33.Botón DISC MENU
Visualiza menús en el DVD.
34.
Botón SELECT
Púlselo para cambiar a un modo de televisor,
modo de entrada externa o modo de DVD.
35.
Botón MUTE
Pulse el botón MUTE para apagar el sonido de un
programa de TV. La visualización del nivel del
sonido cambia de ROJO CLARO a AZUL
CLARO.) Pulse de nuevo el botón MUTE o el
botón VOL K o L para restaurar el sonido.
36.
Botón PICTURE
Presione para entrar en el modo de ajuste de ima-
gen.
37.
Cable de alimentación
Conéctelo a una toma de CA convencional (120
V/60 Hz).
NOTA: Retire el cable de alimentación del gancho
para evitar romperlo antes de conectarlo a
una toma de CA convencional.
38.
Toma de salida de audio digital COAXIAL
Conéctela a la entrada digital de un amplificador o
decodificador externo.
39.
Toma de salida AUDIO L/R
Conéctela a la entrada de audio analógico de un
amplificador o decodificador externo.
NOTA: Las tomas de entrada de audio (roha y
blanca) en el lado trasero sirven para pro-
ducir no el son televisor ni el son de
entrada externa, sino el son DVD.
40.
Toma de entrada ANT.
Conéctela a una antena, sistema de televisión por
cable o sistema de satélite.
ANTENA COMBINADA DE VHF/UHF
La antena de varilla de VHF/UHF (no suministrada)
es desmontable. Inserte el vástago de la antena en el
agujero de la parte superior del televisor/DVD.
Conecte la antena de varilla de VHF/UHF o la antena
combinada de VHF/UHF al terminal ANT. del televi-
sor/DVD como se muestra en el diagrama de abajo.
Para obtener la mejor recepción, extienda completa-
mente la antena de varilla de VHF/UHF y haga los
ajustes necesarios. (Evite tocar la sección superior
cuando haga el ajuste.)
NOTA:
Antes de enchufar la antena de varilla en un terminal
de antena, compruebe que la clavija no esté doblada.
Si lo está, enderece la clavija como se muestra en la
ilustración y luego enchufe la clavija en el terminal
de antena.
NOTA:
La conexión de una antena interior puede que no pro-
porcione siempre una recepción de TV aceptable.
ANTENAS SEPARADAS DE VHF/UHF
En algunas áreas será necesario utilizar una antena
exterior.
Consulte la figura 5 de la página 10
Consulte la figura 4 de la página 10
CONEXIONES DE ANTENA/
TELEVISIÓN POR CABLE
PREPARACIÓN PARA LA
UTILIZACIÓN
TD250UAES 01.5.10 6:55 PM Page 40
–
41
–
ES
0C28
NOTAS:
•
Asegúrese de desconectar la alimentación a todos
los componentes del sistema antes de hacer la
conexión a otro componente.
•
Consulte el manual del propietario de su sistema
estéreo y de cualquier otro componente que vaya a
conectar al televisor/DVD.
•
Las tomas de entrada de audio (roha y blanca) en el
lado trasero sirven para producir no el son televisor
ni el son de entrada externa, sino el son DVD.
Utilice un cable digital coaxial (de venta en el comer-
cio) para las conexiones de audio.
NOTAS:
•
La fuente de audio de un disco del formato de
sonido ambiental Dolby Digital de 5,1 canales no
puede ser grabada como sonido digital por una
platina MD o DAT.
•
Asegúrese de desconectar la alimentación de todos
los componentes del sistema antes de hacer la
conexión a otro componente.
•
Consulte los manuales del propietario de los com-
ponentes que vaya a conectar al televisor/DVD.
•
Ponga DOLBY DIGITAL y DTS en OFF para la
salida de audio en el modo de preparación. La
reproducción en el televisor/DVD utilizando los
ajustes incorrectos puede generar distorsión de
ruido, y también puede estropear los altavoces.
•
El audio se silenciará cuando DOLBY DIGITAL se
ponga en OFF y VIRTUAL 3D se ponga en ON
para la salida de audio en el modo de preparación y
usted seleccione la fuente de audio del formato de
sonido ambiental Dolby Digital de 5,1 canales.
Consulte la figura 10 de la página 13
CONEXIÓN A UN
AMPLIFICADOR EQUIPADO
CON TOMAS DE ENTRADA
DIGITAL, PLATINA MD O
PLATINA DAT (Para DVD)
Consulte la figura 9 de la página 13
CONEXIÓN A UN SISTEMA
ESTÉREO (Para DVD)
TELEVISIÓN POR CABLE SIN CAJA DE
CONVERTIDOR/DECODIFICADOR
Utilice esta conexión si su sistema de televisión por
cable se conecta directamente a su televisor/DVD sin
necesidad de caja de convertidor.
TELEVISIÓN POR CABLE CON CAJA
DE CONVERTIDOR/DECODIFICADOR
O CAJA DE SATÉLITE
Si su proveedor de servicios de televisión por cable le
suministra una caja de convertidor o si usted utiliza
un sistema de satélite, podrá utilizar la conexión bási-
ca mostrada aquí.
1) Abra la tapa del compartimiento de las pilas del
mando a distancia presionándola en el sentido de
la flecha.
2) Inserte 2 pilas tamaño "AA" en su compartimiento
colocando las polaridades (+/-) en sus posiciones
correspondientes.
3) Vuelva a poner la tapa.
Cuando vea un programa grabado en otra fuente
(videograbadora o videocámara), utilice las tomas de
entrada de audio/vídeo de la parte delantera del tele-
visor/DVD.
Conecte las tomas de salida de audio/vídeo de otra
fuente a las tomas AUDIO L/R y VIDEO de este tele-
visor/DVD. Y luego pulse el botón SELECT hasta
que "VIDEO" aparezca en la pantalla.
NOTA:
•
Cuando conecte una videograbadora monoaural
(otra fuente) a este televisor/DVD, conecte la toma
de salida de audio de la videograbadora monoaural
(otra fuente) a la toma AUDIO L de este televi-
sor/DVD. El audio saldrá igualmente en los canales
Ly R.
Conexiones de antena/televisión por cable
Continúa en la página siguiente.
Consulte la figura 8 de la página 12
CONEXIÓN A TOMAS DE
ENTRADA EXTERNA
INSTALACIÓN DE LAS PILAS
Consulte la figura 7 de la página 11
Consulte la figura 6 de la página 11
TD250UAES 01.5.10 6:55 PM Page 41
–
42
–
ES
0C28
Para empezar
1
Conecte el cable de alimentación a una toma de CA
convencional.
NOTA: Si aparecen algunos dígitos en la esquina de
la pantalla, pulse el botón POWER sin des-
enchufar el cable de alimentación.
2
Pulse el botón POWER para encender el
televisor/DVD.
3
Pulse el botón SELECT del mando a distancia hasta
que el número del canal o "TV" aparezca en la pan-
talla. Luego pulse el botón TV.
Si desea cambiar el idioma del menú en pantalla, siga
el procedimiento de abajo.
1
Pulse el botón MENU para que la visualización del
menú aparezca en la pantalla del televisor.
2
Pulse el botón de flecha K o L para apuntar a
"LENGUAJE".
3
Seleccione "ENGLISH" (inglés), "ESPAÑOL" o
"FRANÇAIS" (francés) utilizando el botón de flecha
B o s.
4
Pulse el botón MENU para salir del menú.
NOTA: Para el modo del televisor y el modo del
DVD se deberá seleccionar un idioma de
visualización en pantalla.
Para preajustar un canal o cambiar un canal de prea-
juste, siga el procedimiento de abajo.
PREAJUSTE DE CANALES
SELECCIÓN DE IDIOMA
TV SECTION
PREPARACIÓN PARA LA
UTILIZACIÓN
Fabricado bajo licencia de Dolby
Laboratories.“Dolby” y el símbolo de la D
doble son marcas de fábrica de Dolby
Laboratories.Trabajos confidenciales sin
publicar. ©1992-1997 Dolby Laboratories, Inc.
Todos los derechos reservados.
“DTS” y “DTS Digital Out” son marcas de
fábrica de Digital Theater Systems, Inc.
Si se utiliza este televisor/DVD para reproducir
fuentes del formato de sonido ambiental Dolby
Digital de 5,1 canales o de sonido ambiental DTS, el
televisor/DVD dará salida a un flujo de datos Dolby
Digital o DTS desde su toma de salida de audio digi-
tal COAXIAL. Conectando el reproductor a un
decodificador Dolby Digital o DTS, usted podrá dis-
frutar de un ambiente más convincente y real con un
sonido ambiental potente y de alta calidad de tipo
profesional tal como el que se oye en salas de cine.
Utilice cables digitales coaxiales (de venta en el com-
ercio) para las conexiones de audio.
NOTAS:
•
Asegúrese de desconectar la alimentación de todos
los componentes del sistema antes de hacer la
conexión a otro componente.
•
Consulte los manuales del propietario de los com-
ponentes que vaya a conectar al televisor/DVD.
•
Si conecta un decodificador Dolby Digital, ponga
DOLBY DIGITAL en ON para la salida de audio
en el modo de preparación.
•
Si conecta un decodificador DTS, ponga DTS en
ON para la salida de audio en el modo de
preparación.
•
A menos que se haga la conexión a un decodifi-
cador Dolby Digital o DTS, ponga DOLBY DIGI-
TAL y DTS en OFF para la salida de audio en el
modo de preparación. La reproducción en el televi-
sor/DVD utilizando los ajustes incorrectos puede
generar distorsión de ruido, y también puede estro-
pear los altavoces.
•
El audio se silenciará cuando DOLBY DIGITAL se
ponga en OFF y VIRTUAL 3D se ponga en ON
para la salida de audio en el modo de preparación y
usted seleccione la fuente de audio del formato de
sonido ambiental Dolby Digital de 5,1 canales.
Consulte la figura 11 de la página 14
CONEXIÓN A UN
DECODIFICADOR DOLBY
DIGITAL O A UN
DECODIFICADOR DTS
(Para DVD)
TD250UAES 01.5.10 6:55 PM Page 42
–
43
–
ES
0C28
1
Pulse el botón MENU para que la visualización del
menú aparezca en la pantalla del televisor.
2
Pulse el botón de flecha K o L para apuntar a
"CANALES PROGRAMADOS". Luego pulse el
botón de flecha B.
3
Pulse el botón de flecha K o L para apuntar a
"MEMO AUTOMÁTICA". Luego pulse el botón de
flecha B.
El sintonizador explora y memoriza todos los canales
activos de su zona.
•
El televisor distingue entre los canales de TV con-
vencional y los canales de televisión por cable.
•
Cuando termine la función AUTO MEMO, el canal
memorizado más bajo vuelve a aparecer en la pan-
talla.
•
Cuando pulse el botón de flecha K o L después de
seleccionar AUTO MEMO, el sintonizador se
detendrá en los canales sin memorizar solamente.
•
El televisor puede considerar canales de TV como
canales CATV según las condiciones de la recep-
ción. En este caso, active de nuevo la función
AUTO MEMO en condiciones de recepción fina.
[FUNCIÓN DE ADICIÓN/BORRADO]
1) Pulse el botón MENU para que la visualización
del menú aparezca en la pantalla del televisor.
2) Pulse el botón de flecha K o L para apuntar a
"CANALES PROGRAMADOS". Luego pulse el
botón de flecha B.
3) Pulse el botón de flecha K o L para apuntar a
"AÑADIR/BORRAR". Luego pulse el botón de
flecha B.
4) Utilice el botón de flecha K o L para seleccionar
el canal que desee memorizar o borrar de la
memoria.
NOTA: La visualización volverá a la pantalla en
unos 10 segundos. Realice la función
"AÑADIR/BORRAR" mientras aparece la
visualización en la pantalla.
•
Pulse el botón de flecha B o s para encender el
número de canal en AZUL CLARO si usted desea
añadir el canal a la memoria.
•
Pulse el botón de flecha B o s para encender el
número de canal en ROJO CLARO si usted desea
borrar el canal a la memoria.
5) Pulse el botón MENU para salir del menú.
REPRODUCCIÓN DE UN DVD
DE VÍDEO O UN CD DE AUDIO
Para empezar
Conecte la alimentación del televisor, amplificador y
cualquier otro componente que esté conectado al
reproductor DVD. (Cambie el sistema de entrada para
adaptarlo al reproductor DVD, y compruebe que el
volumen del sonido sea correcto.)
1 Pulse el botón POWER.
¡
La alimentación se conectará.
2 Pulse el botón OPEN/CLOSE.
¡
La bandeja de carga del disco se abrirá.
3 Ponga un disco en la bandeja.
¡Asegúrese de que el disco esté correctamente asen-
tado en el hueco correcto, con el lado de la etiqueta
hacia arriba.
4 Pulse el botón PLAY.
¡
La bandeja se cerrará automáticamente y la repro-
ducción empezará desde el primer capítulo o pista
del disco. Necesitará pulsar el botón PLAY sólo
cuando la bandeja haya sido cerrada pulsando el
botón OPEN/CLOSE.
¡Cuando reproduzca un DVD que tenga grabado un
menú de títulos, el menú tal vez aparezca en la pan-
talla. En este caso, consulte "UTILIZACIÓN DEL
MENÚ DE TÍTULOS".
5
Pulse el botón STOP para detener la reproducción.
CDDVD
REPRODUCCIÓN DE UN
DISCO
DVD SECTION
TD250UAES 01.5.10 6:55 PM Page 43
Printed in Malaysia 0EMN01856
TD250UA ★★★★
LIMITED WARRANTY
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail
purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to
any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED
SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI
AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest SYLVANIA Authorized Service Center or for general service procedure,
please call 1-800-968-3429 or write to the following:
FUNAI CORPORATION, INC.
Customer Service
100 North Street; Teterboro, NJ 07608
Tel :1-800-968-3429
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
TD250UA_BCV 01.5.10 6:55 PM Page 44
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Sylvania 6519DB Manual de usuario

Sylvania
Marca
Sylvania
Modelo
6519DB
Categoría
Reproductores de DVD
Tipo
Manual de usuario
Este manual también es adecuado para
Descargar PDF
informe

en otros idiomas

Artículos relacionados

Otros documentos