QUIKCELL Qfit Guía del usuario

Marca: QUIKCELL

Modelo: Qfit

Tipo: Guía del usuario

QUICK START GUIDE

GUÍA DE INICIO RÁPIDO

Wireless Neckband

Earphones

Auriculares Inalámbricos

de Collar

QFIT

Bluetooth Version: v5.0

Versión Bluetooth: v5.0

Frequency: 20Hz-20KHz

Frecuencia: 20Hz-20KHz

Driver Output: 12mW

Salida del controlador: 12mW

Supported Profile: A2DP / HFP / HSP / AVRCP

Perfil compatible: A2DP / HFP / HSP / AVRCP

Playback Time: Up to 5 hours

Tiempo de reproducción: hasta 5 horas

Standby Time: Up to 180 hours

Tiempo en espera: hasta 180 horas

Battery Type: 3.7V Li-polymer rechargeable battery

Tipo de batería: batería recargable de polímero de litio

de 3.7V

SPECIFICATIONS

ESPECIFICACIONES

Wireless Neckband Headphones

Audífonos inalámbricos con banda para el cuello

Micro-USB Charging Cable

Cable de carga micro-USB

Gel Ear-Tips

Almohadillas de gel para los audífonos

1 2 3

WHAT’S INSIDE

QUÉ HAY DENTRO

Phone Button

• Short Press = play/pause music & answer/end

phone calls

• Long Press = ignore/decline phone calls/power on/

off

• Double Press = re-dial the last number called

QFIT

BUTTONS & CONTROLS

Botón de teléfono

• Pulsación corta = reproducir/pausar la música y

contestar/finalizar llamadas telefónicas

• Pulsación larga = ignorar/rechazar llamadas

telefónicas/encendido/apagado

• Doble pulsación = volver a marcar el último número

llamado

[+] Button

• Short Press = skip to next song

• Long Press = increase volume

Botón [+]

• Pulsación corta = saltar a la siguiente canción

• Pulsación larga = subir el volumen

[–] Button

• Short Press = skip to previous song

• Long Press = decrease volume

QFIT

BUTTONS & CONTROLS

Botón [–]

• Pulsación corta = saltar a la canción anterior

• Pulsación larga = bajar el volumen

Microphone

Micrófono

LED Indicator Light

Luz LED Indicadora

Micro-USB Charging Port

Puerto de carga Micro-USB

Magnetic Closure

Cierre magnético

QFIT

BUTTONS & CONTROLS

Plug Micro-USB into headphones and USB into a

compatible port (such as a wall charger, car charger, or

computer). Light is RED while charging and turns BLUE

when fully charged.

*Wall/Car charger not included

Conecte el Micro-USB a los audífonos y el USB en un

puerto compatible (como un cargador de pared, un

cargador de automóvil o una computadora). La luz está

ROJA mientras se carga y se vuelve AZUL cuando están

completamente cargados.

*Cargador de pared/automóvil no incluido

CHARGE HEADPHONES

STEP 1

PAIRING YOUR DEVICE

STEP 2

On the side of the QFit neckband, press and hold the

PHONE button until you see the LED indicator flashing

between red and blue and hear “Power on, pairing.” In

your devices Bluetooth settings look for “QFit” to appear

as an option and select to complete pairing.

En el lateral de la banda de cuello QFit, mantenga

presionado el botón del TELÉFONO hasta que vea el

indicador LED parpadear entre rojo y azul y escuche

“Encendido, emparejamiento”. En la configuración de

Bluetooth de sus dispositivos, busque “QFit” para que

aparezca como una opción y seleccione para completar

el emparejamiento.

When you’re ready to use your QFit, press the PHONE

button to turn your QFit on.

Use the + and - buttons on the neckband to adjust

volume and skip songs.

Use the PHONE button to play/pause music and answer,

end, decline, and re-dial phone calls, and power on/off.

Cuando esté listo para usar su QFit, presione el botón de

TELÉFONO para encenderlo.

Use los botones + y - en la banda del cuello para ajustar

el volumen y saltar canciones.

Utilice el botón del TELÉFONO para reproducir/pausar la

música y responder, finalizar, rechazar y volver a marcar

llamadas telefónicas, y encender/apagar.

PAIRING YOUR DEVICE

STEP 3

ONE YEAR LIMITED WARRANTY

Garantía limitada de un año, visite

visit quikcell.com/warranty

QFIT

QFIT-BLK, QFIT-BLU, QFIT-RED, QFIT-WHT

FCC ID: 1AMPLQFIT

Alpha Comm Enterprises Inc., LLC

1500 Lakes Parkway Lawrenceville GA 30043.

1-888-951-0909

Alpha Comm Enterprises, LLC. All other trademarks are the property of their respective

owners. Designed by Alpha Comm Enterprises, LLC at

Diseñado por Alpha Comm Enterprises, LLC en

1500 Lakes Parkway, Lawrenceville, GA.30043.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

FCC STATEMENT :

This device complies with Part

15 of the FCC Rules.

Operation is subject to the

following two conditions:

(1) This device may not cause

harmful interference, and

(2) This device must accept

any interference received,

includinginterference that

may cause undesired

operation.

Warning: Changes or

modifications not expressly

approved by the

partyresponsible for

compliance could void the

user's authority to operate the

equipment.

NOTE: This equipment has

been tested and found to

comply with the limits for a

Class B digital device,

pursuant to Part 15 of the

FCC Rules.These limits are

designed to provide

reasonable protection against

harmful interference in a

residential installation. This

equipment

generates uses and can radiate

radio frequency energy and, if

not installed and used in

accordance with the

instructions, may cause

harmful interference to radio

communications. However,

there is no guarantee that

interference will not occur in a

particular installation. If this

equipment does cause

harmful interference to radio

or television reception, which

can be determined by turning

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

includinginterference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the

partyresponsible for compliance could void the user's authority to

operate the equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules.These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure

requirement. The device can be used in portable exposure condition

without restriction.

QUIKCELL Qfit Guía del usuario

Marca: QUIKCELL

Modelo: Qfit

Tipo: Guía del usuario

Descargar PDF

informe

En otros idiomas

English: QUIKCELL Qfit User guide

QUIKCELL Qfit Guía del usuario

QUIKCELL Qfit Guía del usuario

En otros idiomas

Documentos relacionados

Otros documentos