WIRELESS CHARGER - SAFETY WARNINGS AND INSTRUCTIONS FOR USE
To Power ON the Wireless Charger
Your desk includes wireless charging capabilities using the wireless charger
as shown. Please carefully follow the instructions and safety warnings below
before using the wireless charger with your supported device.
Plug the USB cable from the bottom of the wireless charger into any powered USB 2.0
port, or any 5V power adapter that accepts a USB plug.
Using the Wireless Charger
To charge your device using
wireless charging, place the device
centered on the wireless charger
face and wait for the device to
indicate it has begun charging.
Using the USB Charge Port
To charge your device using USB
charging port, plug in your device’s
USB charging cord into the USB port
as shown and wait for the device to
indicate it has begun charging.
USB Port on wireless
charger will light up RED
once powered on. The
charger is now ready to use.
NOTE: The wireless charger included supports most devices with
wireless charging capabilities. Please consult your device’s OEM
instruction manual for proper wireless charging use, safety
warnings, and limitations. Stop using the wireless charger
IMMEDIATELY if your device becomes hot. Improper use of the
wireless charger, using non-compatible devices, or tampering with
the wireless charger in any way may cause device failure, damage,
or injury.
Voltage: 5V / Input: 5V/1.5A
Output (USB Port): 5V/1A
Output (Wireless): 5W Wireless
Charging Surface
USB
Charge Port
Powered USB Port
5V Power Adapter
SAFETY WARNINGS - PLEASE READ FIRST
Devices with cases
thicker than 4mm
may not allow
wireless charging.
Remove the case
from the device or
use the USB port
for wired charging
instead.
Devices with rings,
kickstands, or
finger grip
accessories will
not allow wireless
charging. Remove
the accessories or
use the USB port
for wired charging
instead.
DO NOT attempt to
wireless charge devices
with metallic cases,
metallic attachments,
or magnetic
attachments. Remove
the device from such
cases or use the USB
port for wired charging
instead.
DO NOT allow any metallic foreign
objects or liquids to come in
contact with the wireless charger.
Only devices that support wireless
charging should be put on the wireless
charger surface.
Rotate the dust cover 90 degrees
counter-clockwise to cover the USB
charging port when not in use.
ADDENDUM A