Important: Read before use. • Importante: Leer antes de usar.
19” Intelligent 8-Port PDU
User Manual
Model 163682
Scan to
register your
product warranty
For additional benets:
or go to: register.intellinet-network.com/r/163682
INT_163682_UM_0123_REV_5.11.indd 1INT_163682_UM_0123_REV_5.11.indd 1 1/19/23 1:18 PM1/19/23 1:18 PM
19” Intelligent 8-Port PDU User Manual
2
Before You Begin
Read through this manual carefully before using the product and operate it according
to the manual. Keep it in an easily accessible location for future reference.
Do not disassemble the device or remove the seal label from the device.
Doing so will void the Intellinet product warranty.
All pictures in this manual are for reference only. The actual product may dier. Intellinet reserves the
right to make changes to any software or hardware to improve reliability, function, or design at any
time without notice. The information contained herein is subject to change without prior notice.
No user, corporation or individual, shall duplicate, in whole or in part, distribute,
modify, decompile, disassemble, decode, reverse engineer, rent, transfer or sublicense
such software without prior written consent from the copyright holders.
This manual is copyrighted. No part of this publication may be reproduced, distributed or
used in any form without written permission from Intellinet Network Solutions.
INT_163682_UM_0123_REV_5.11.indd 2INT_163682_UM_0123_REV_5.11.indd 2 1/19/23 1:18 PM1/19/23 1:18 PM
User Manual 19” Intelligent 8-Port PDU
Contents
Chapter 1: Getting Started ................................................4
Product Overview ...............................................................................4
Product Features: ...............................................................................4
Product Specifications: .....................................................................4
Chapter 2: Product Diagram .............................................5
Key ...................................................................................................... 5
Chapter 3: Functions ..........................................................6
Basic Functions ..................................................................................6
Interface Functions ............................................................................6
1 Login Control Interface ....................................................................................... 6
2 PDU System Information ...................................................................................... 7
3 Power Port Control .............................................................................................. 7
4 ON and OFF Time Delay ..................................................................................... 8
5 Threshold Value Setting....................................................................................... 8
6 Change the User Name and Password ............................................................. 9
7 IP Address and DNS Setting ................................................................................ 9
Additional Information .....................................................10
3
INT_163682_UM_0123_REV_5.11.indd 3INT_163682_UM_0123_REV_5.11.indd 3 1/19/23 1:18 PM1/19/23 1:18 PM
19” Intelligent 8-Port PDU User Manual
Chapter 1: Getting Started
Product Overview
The Intellinet 19” Intelligent 8-Port PDU helps provide steady power to keep network equipment
active. It monitors electricity and environmental status to provide users with relevant information
and alert them of potential power overloads. The user can readily view equipment status and
turn on or shut o each output port by accessing the device through the network.
Product Features:
• Eight power outputs (total current, 16 A)
• Current, voltage (total input) measurements
• Built-in temperature and humidity sensors to monitor the environment
• Embedded technology, Java support, web browsing
• Two-level programmable values for warning and overload
• Circuit-delay time setting to prevent power surges
• LED indicators for the power supply on each switch
• LED digital display to show the current value of voltage and current
• Local query buttons of PDU equipment
• Built-in lightning- and voltage-surge resistance to effectively protect connected equipment
Product Specifications:
• Voltage input: 110-240 V, 50/60 Hz
• Voltage output: 110-240 V, 50/60 Hz
• Input socket type: IEC320 C20, *1 bit
• Output socket type: IEC320 C13, *8 bits
• Protection: 16 A overload protection, lightning protection
• Voltage measurement range: 90 – 264 VAC, resolution 1 V
• Current working range: 0 – 20 A, resolution 0.1 A
• Temperature measurement range: 20% -90% RH, resolution 1% RH
• Humidity measurement range: 0 – 50°C , resolution 1°C
4
INT_163682_UM_0123_REV_5.11.indd 4INT_163682_UM_0123_REV_5.11.indd 4 1/19/23 1:18 PM1/19/23 1:18 PM
User Manual 19” Intelligent 8-Port PDU
5
Chapter 2: Product Diagram
Key
1 Power Input Socket: IEC320 C20
2 Output Socket: IEC C13
3 Reset Key
4 Function Key: check the machine IP address
5 Display Panel: voltage, current, temperature, humidity, etc.
6 Network Port: connect LAN or WAN
1 2 43 5 6
INT_163682_UM_0123_REV_5.11.indd 5INT_163682_UM_0123_REV_5.11.indd 5 1/19/23 1:18 PM1/19/23 1:18 PM
19” Intelligent 8-Port PDU User Manual
Chapter 3: Functions
Basic Functions
• Connecting and Powering Equipment: Connect the input power cords from your server/network
equipment to the output ports on the Intellinet 19” Intelligent 8-Port PDU. Connect one end of a power
cord to the input socket and the other to an AC wall outlet. By default, the Intelligent PDU will then
power up each power-out socket from ports one through eight at one-second intervals. The display
panel will show the current supply voltage and total power output as well as the LED indicator lights.
• Cycle through statuses: Press FUNC briefly and repeatedly to review statuses for
current-voltage interface, temperature and humidity, and to show IP address.
• Restore factory default settings: Press and hold FUNC (approx. 10 seconds).
• Quick Restart: Press RST.
• Network access and control: With the PDU powered-on, users can access and control the
host with a PC in the same LAN by connecting an RJ45 cable to the network port.
Interface Functions
1 Login Control Interface
Open the IE browser on any PC in LAN host and enter the IP address into the address
bar: hp://192.168.0.100. Log in to the Intelligent PDU control interface (shown below)
by entering the administrator credentials that follow into the login screen:
User Name: admin
Password: admin
6
INT_163682_UM_0123_REV_5.11.indd 6INT_163682_UM_0123_REV_5.11.indd 6 1/19/23 1:18 PM1/19/23 1:18 PM
User Manual 19” Intelligent 8-Port PDU
2 PDU System Information
Click System in the conguration bar on the left side of the interface to display PDU system information. The
screen displays the following:
3 Power Port Control
Click Socket in the conguration bar on the left side of the interface. The screen displays the following:
Users can turn on or shut o any of the eight outputs through this interface.
• Start all: click on the drop-down menu from the Operation box, choose “Start” and click the “Apply” button.
• Shut off all: click the drop-down menu from the Operation box,
choose “Shut off” and click the “Apply” button.
• Custom Start and Shut off (e.g., the user wants to turn on outlets 1, 2, 3, and 4 but shut off 5, 6, 7,
and 8): Click the empty boxes of the outlets to turn on, select Start from the drop-down menu and
click Apply. Then, click the empty boxes of the outlets to turn off, select Shut off and click Apply.
7
INT_163682_UM_0123_REV_5.11.indd 7INT_163682_UM_0123_REV_5.11.indd 7 1/19/23 1:18 PM1/19/23 1:18 PM
19” Intelligent 8-Port PDU User Manual
4 ON and OFF Time Delay
Click PDU in the conguration box on the left side of the interface. The screen displays the following:
• This function lets you adjust delay times in the start-up and shut-off sequences for connected
equipment. In the default settings shown here, power is supplied to and shut off from all ports in
one-second intervals after five seconds have passed from a start-up or shut-down command. Change
values by entering them into the fields and click Apply. NOTE: When input power is disconnected
from its source, the OFF Delay function is ignored, and power shuts off immediately to all equipment.
Shutting off the time-delay function only applies to the devices connected to the PDU.
5 Threshold Value Setting
Click Threshold value in the conguration box on the left side of the interface. The screen displays the
following:
The meaning of each input is as follows; adjust values here and click Apply when nished:
• Current Warning value (17.0 A) — if total current exceeds 17 A, the PDU will beep twice.
• Current Overload value (17.0 A) — if total current exceeds 17 A,
the PDU will shut off power to all output ports.
• Warning Voltage value (250) — if input voltage exceeds 250 V, the PDU will beep twice.
• Voltage Overload value (300) – if input voltage exceeds 300 V,
the PDU will shut off power to all output ports.
• Temperature is Under (5°C) or Above (50°C): if the built-in temperature sensor reads
temperatures under or over these thresholds, the PDU will beep twice.
• Humidity Warning value (80%): if the built-in humidity sensor reads
humidity at more than 80%, the PDU will beep twice.
NOTE: if a threshold is reduced, the unit will not power off but will
give a two-beep warning until the limit is exceeded.
8
INT_163682_UM_0123_REV_5.11.indd 8INT_163682_UM_0123_REV_5.11.indd 8 1/19/23 1:18 PM1/19/23 1:18 PM
User Manual 19” Intelligent 8-Port PDU
6 Change the User Name and Password
Click User in the conguration box on the left side of the interface. The screen displays following:
After lling in the original and new user name as well as the password and password conrmation
respectively, click the Apply button. The new user name and password will be used at the next login.
7 IP Address and DNS Setting
Click Network in the conguration box on the left side of the interface. The screen displays the following:
Users can adjust values here. The meaning of each input in the above dialog box is as follows:
• Host Name: the name of the LAN.
• IP Address: the current LAN IP address.
• Subnet Mask: the current LAN subnet mask.
• Gateway: the current gateway.
• Enable DHCP: allows the supervising router to distribute network
parameters automatically for the Intelligent PDU.
• Primary DNS IP: refers to the supervising router setting of the current LAN.
• Secondary DNS IP: refers to the supervising router setting of current LAN.
9
INT_163682_UM_0123_REV_5.11.indd 9INT_163682_UM_0123_REV_5.11.indd 9 1/19/23 1:18 PM1/19/23 1:18 PM
19” Intelligent 8-Port PDU User Manual
10
Additional Information
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate Collection Systems)
ENGLISH: This symbol on the product or its packaging
means that this product must not be treated as
unsorted household waste. In accordance with EU
Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE), this electrical product must
be disposed of in accordance with the user’s local
regulations for electrical or electronic waste. Please dispose
of this product by returning it to your local point of sale or
recycling pickup point in your municipality.
DEUTSCH: Dieses auf dem Produkt oder der Verpackung
angebrachte Symbol zeigt an, dass dieses Produkt
nicht mit dem Hausmüll entsorgtwerden darf. In
Übereinstimmung mit der Richtlinie 2012/19/EU des
Europäischen Parlaments und des Rates über Elektro-
und Elektronik-Altgeräte (WEEE) darf dieses Elektrogerät
nicht im normalen Hausmüll oder dem Gelben Sack
entsorgt werden. Wenn Sie dieses Produkt entsorgen
möchten, bringen Sie es bitte zur Verkaufsstelle zurück
oder zum Recycling-Sammelpunkt Ihrer Gemeinde.
ESPAÑOL: Este símbolo en el producto o su embalaje
indica que el producto no debe tratarse como residuo
doméstico. De conformidad con la Directiva 2012/19/EU de
la UE sobre residuos de aparatos eléctricos y electrónicos
(RAEE), este producto eléctrico no puede desecharse se
con el resto de residuos no clasicados. Deshágase de
este producto devolviéndolo a su punto de venta o a
un punto de recolección municipal para su reciclaje.
FRANÇAIS: Ce symbole sur Ie produit ou son emballage
signie que ce produit ne doit pas être traité comme un
déchet ménager. Conformément à la Directive 2012/19/EU
sur les déchets d’équipements électriques et électroniques
(DEEE), ce produit électrique ne doit en aucun cas être
mis au rebut sous forme de déchet municipal non trié.
Veuillez vous débarrasser de ce produit en Ie renvoyant
à son point de vente ou au point de ramassage local
dans votre municipalité, à des ns de recyclage.
POLSKI: Jeśli na produkcie lub jego opakowaniu
umieszczono ten symbol, wówczas w czasie utylizacji
nie wolno wyrzucać tego produktu wraz z odpadami
komunalnymi. Zgodnie z Dyrektywą Nr 2012/19/EU w
sprawie zużytego sprzętu elektrycznego i elektronicznego
(WEEE), niniejszego produktu elektrycznego nie
wolno usuwać jako nie posortowanego odpadu
komunalnego. Prosimy o usuniecie niniejszego
produktu poprzez jego zwrot do punktu zakupu
lub oddanie do miejscowego komunalnego punktu
zbiórki odpadów przeznaczonych do recyklingu.
ITALIANO: Questo simbolo sui prodotto o sulla relativa
confezione indica che il prodotto non va trattato
come un riuto domestico. In ottemperanza alla
Direttiva UE 2012/19/EU sui riuti di apparecchiature
elettriche ed elettroniche (RAEE), questa prodotto
elettrico non deve essere smaltito come riuto
municipale misto. Si prega di smaltire il prodotto
riportandolo al punto vendita o al punto di raccolta
municipale locale per un opportuno riciclaggio.
WARRANTY INFORMATION • GARANTIEINFORMATIONEN • GARANTÍA • GARANTIE • GWARANCJI • GARANZIA
intellinet-network.com
EN MÉXICO:Póliza de Garantía Intellinet Network Solutions — Datos del importador y responsable
ante el consumidor IC Intracom México, S.A.P.I. de C.V. • Av. Interceptor Poniente # 73, Col. Parque
Industrial La Joya, Cuautitlán Izcalli, Estado de México, C.P. 54730, México. • Tel. (55)1500-4500
LA presente garantía cubre los siguientes productos contra cualquier
defecto de fabricación en sus materiales y mano de obra.
A Garantizamos productos de limpieza, aire comprimido y consumibles, por 60 dias a partir de la fecha de entrega,
o por el tiempo en que se agote totalmente su contenido por su propia función de uso, lo que suceda primero.
B Garantizamos los productos con partes móviles por 3 años.
C Garantizamos los demás productos por 5 años (productos sin partes móviles), bajo las siguientes condiciones:
1 Todos los productos a que se reere esta garantía, ampara su cambio físico, sin ningún cargo para el consumidor.
2 El comercializador no tiene talleres de servicio, debido a que los productos que se garantizan
no cuentan con reparaciones, ni refacciones, ya que su garantía es de cambio físico.
3 La garantía cubre exclusivamente aquellas partes, equipos o sub-ensambles que hayan
sido instaladas de fábrica y no incluye en ningún caso el equipo adicional o cualesquiera
que hayan sido adicionados al mismo por el usuario o distribuidor.
INT_163682_UM_0123_REV_5.11.indd 10INT_163682_UM_0123_REV_5.11.indd 10 1/19/23 1:18 PM1/19/23 1:18 PM
User Manual 19” Intelligent 8-Port PDU
11
Para hacer efectiva esta garantía bastará con presentar el producto al distribuidor en el domicilio donde fue adquirido o
en el domicilio de IC Intracom México, S.A.P.I. de C.V., junto con los accesorios contenidos en su empaque, acompañado
de su póliza debidamente llenada y sellada por la casa vendedora (indispensable el sello y fecha de compra) donde
lo adquirió, o bien, la factura o ticket de compra original donde se mencione claramente el modelo, número de serie
(cuando aplique) y fecha de adquisición. Esta garantía no es válida en los siguientes casos: Si el producto se hubiese
utilizado en condiciones distintas a las normales; si el producto no ha sido operado conforme a los instructivos
de uso; o si el producto ha sido alterado o tratado de ser reparado por el consumidor o terceras personas.
REGULATORY STATEMENTS
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in accordance with the instructions may
cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures: reorient or relocate the receiving antenna;
increase the separation between the equipment and the receiver; connect the equipment to an outlet on a
circuit dierent from the receiver; or consult the dealer or an experienced radio/TV technician for help.
CE
ENGLISH : This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic
Compatibility Regulations 2016) and / or 2014/35/EU (UKCA Electrical Equipment
[Safety] Regulations 2016). The Declaration of Conformity for is available at:
DEUTSCH : Dieses Gerät enspricht der CE 2014/30/EU und / oder 2014/35/EU. Die
Konformitätserklärung für dieses Produkt nden Sie unter:
ESPAÑOL : Este dispositivo cumple con los requerimientos de CE 2014/30/EU y / o
2014/35/EU. La declaración de conformidad esta disponible en:
FRANÇAIS : Cet appareil satisfait aux exigences de CE 2014/30/EU et / ou
2014/35/EU. La Déclaration de Conformité est disponible à:
POLSKI : Urządzenie spełnia wymagania CE 2014/30/EU I / lub 2014/35/EU. Deklaracja
zgodności dostępna jest na stronie internetowej producenta:
ITALIANO : Questo dispositivo è conforme alla CE 2014/30/EU e / o 2014/35/EU.
La dichiarazione di conformità è disponibile al:
support.intellinet-network.com/barcode/163682
North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677, USA
Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan
Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver, Germany
All trademarks and trade names are the property of their respective owners.
Alle Marken und Markennamen sind Eigentum Ihrer jeweiligen Inhaber.
Todas las marcas y nombres comerciales son propiedad de sus respectivos dueños.
Toutes les marques et noms commerciaux sont la propriété de leurs propriétaires respectifs.
Wszystkie znaki towarowe i nazwy handlowe należą do ich właścicieli.
Tutti i marchi registrati e le dominazioni commerciali sono di proprietà dei loro rispettivi proprietari.
INT_163682_UM_0123_REV_5.11.indd 11INT_163682_UM_0123_REV_5.11.indd 11 1/19/23 1:18 PM1/19/23 1:18 PM
intellinet-network.com
All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights
reserved. Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.
Printed on recycled paper. INT_163682_UM_0123_REV_5.11
INT_163682_UM_0123_REV_5.11.indd 12INT_163682_UM_0123_REV_5.11.indd 12 1/19/23 1:18 PM1/19/23 1:18 PM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
En otros idiomas
- italiano: Intellinet 163682 Manuale utente
- English: Intellinet 163682 User manual
Documentos relacionados
-
Intellinet 163682 Quick Instruction Guide
-
Intellinet 714914 Quick Instruction Guide
-
-
-
-