Avanti BCA516SS Manual de usuario

Marca: Avanti

Modelo: BCA516SS

Categoría: Enfriadores de bebidas

Tipo: Manual de usuario

El Avanti BCA516SS es un enfriador compacto y eficiente que mantiene tus bebidas frías y organizadas. Con tres estantes ajustables, puedes personalizar el espacio para adaptarse a tus necesidades. El panel de control fácil de usar te permite ajustar la temperatura y controlar la configuración de la luz interior, y el ventilador interior asegura una distribución uniforme del aire para un enfriamiento rápido. El diseño elegante y moderno complementa cualquier decoración y es perfecto para usar en el hogar, la oficina u otros espacios.

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

Model Number / No. de Modelo: BCA516SS

Beverage Cooler / Enfriador de Bebidas

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS.

La sección en español empieza en la página 16.

Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and

specifications without notice.

Avanti Products LLC

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

TABLE OF CONTENTS

Important Safety Instructions

Appliance Safety

Important Safeguides

Refrigerant Gas Warnings

Help Us Help You …

Parts and Features

Electrical Connection

Extension Cord / Surge Protector

Installation Instructions

Before Using Your Appliance

Installation of Your Appliance

Built-in Cabinet Instructions

Operating Your Appliance

10 - 11

ON/OFF Power

Setting the Temperature Control

Storage

Interior Light

Door Lock

Shelves

Care and Maintenance

Cleaning Your Beverage Cooler

Power Failure

Moving Your Beverage Cooler

Energy Saving Tips

Troubleshooting Guide

Service for Your Appliance

Wiring Diagram

Your Avanti Products Warranty

Instrucciones en Español

16 - 18

Registration Information and Registration Card

Last Page

IMPORTANT SAFETY INSTRUCTIONS



WARNING



To reduce the risk of fire, electrical shock,

or injury when using your appliance, follow

these basic precautions:

• Read all instructions before using the Beverage Cooler.

• DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned

appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

• Before you throw away your old Beverage Cooler: Take off the door. Leave the

shelves in place so that children may not easily climb inside.

• Never allow children to operate, play with, or crawl inside the appliance.

• Never clean appliance parts with flammable fluids. The fumes can create a fire

hazard or explosion.

• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity

of this or any other appliance. The fumes can create a fire hazard or explosion.

-Save these instructions-

APPLIANCE SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always

read and obey all safety messages.

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that

can kill or injure you and others. All safety messages will follow the Safety

Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.

Danger means that failure to heed this

safety statement may result in severe

personal injury or death.

Warning means that failure to heed this

safety statement may result in extensive

product damage, serious personal injury, or

death.

Caution means that failure to heed this

safety statement may result in minor or

moderate personal injury, or property or

equipment damage.

All safety messages will alert you do what the potential hazard is, tell you how to reduce the chance of

injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUIDES

Before the appliance is used, it must be properly positioned and installed as

described in this manual, so read the manual carefully. To reduce the risk of fire,

electrical shock or injury when using the appliance, follow basic precaution,

including the following:

• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and

do not use an extension cord.

• Replace all panels before operating.

• It is recommended that a separate circuit, serving only your appliance be provided. Use

receptacles that cannot be turned off by a switch or pull chain.

• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or

explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of

this or any other appliance. The fumes can create a fire hazard or explosion.

• Before proceeding with cleaning and maintenance operations, make sure the power line of the

unit is disconnected.

• Do not connect or disconnect the electric plug when your hands are wet.

• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result

in electrical shock or death.

• Do not attempt to repair or replace any part of your appliance unless it is specifically

recommended in this material. All other servicing should be referred to a qualified technician.

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

• Use two or more people to move and install appliance. Failure to do so can result in back or other

injury.

• To ensure proper ventilation for your appliance, the front of the unit must be completely

unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below

90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain,

water spray or drips.

• The appliance should not be located next to ovens, grills or other sources of high heat.

• The appliance must be installed with all electrical, water and drain connections in accordance with

state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in

accordance with the National Electrical Code and local codes and ordinances is required.

• Do not kink or pinch the power supply cord of appliance.

• The fuse (or circuit breaker) size should be 15 amperes.

• It is important for the appliance to be leveled in order to work properly. You may need to make

several adjustments to level it.

• Never allow children to operate, play with or crawl inside the appliance.

• Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may

damage or discolor the interior.

• Do not use this apparatus for other than its intended purpose.

REFRIGERANT GAS WARNINGS / AVERTISSEMENTS GAZ REFRIGERANT

DANGER - Risk of fire or explosion. Flammable refrigerant used.

DO NOT use mechanical devices to defrost beverage cooler. DO NOT puncture refrigerant

tubing.

DANGER - Risque d’incendie ou d’explosion. Réfrigérant inflammable utilisé.

Ne pas utiliser de dispositifs mécaniques pour réfrigérateur à dégivrage. Ne pas percer la tuyauterie

du réfrigérant

DANGER - Risk of fire or explosion. Flammable refrigerant used.

To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing.

DANGER - Risque d’incendie ou d’explsion. Réfrigérant inflammable utilisé.

Pour être réparé que par du peronnel qualifié.Ne pas percer la tuyauterie du réfrigérant.

CAUTION - Risk of fire or explosion. Flammable refrigerant used.

Consult repair manual / owner’s guide before attempting to service

this product. All safety precautions must be followed.

AVERTISSEMENT - Risque d’incendie ou d’explosion. Réfrigérant inflammable

utilisé. Consultez réparation manuelle / propriétaire, guide avant d’ essayer

de réparer ce produit. Toutes les précautions doivent être suivies.

CAUTION - Risk of fire or explosion. Dispose of property in accordance

with federal or local regulations. Flammable refrigerant used.

AVERTISSEMENT - Risque d’incendie ou d’explosion. Aliéner des biens

conformément à la réglementation fedérale ou locale. Réfrigérant inflammable utilisé.

CAUTION - Risk of fire or explosion due to puncture of refrigerant tubing;

Follow handling instructions carefully. Flammable refrigerant used.

AVERTISSEMENT - Risque d’incendie ou d’explosion dus à la perforation des

tuyaux de fluide réfrigérant, suivez attentivement les instructions remise. Réfrigérant inflammable

utilisé

CAUTION-To Prevent A Child From Being Entrapped, Keep Out Of Reach Of Children And Not

In The Vicinity Of Beverage cooler.

CAUTION-Risk of Fire

HELP US HELP YOU...

Read this guide carefully.

It is intended to help you operate and maintain

your new Beverage Cooler properly.

Keep it handy to answer your questions.

If you don't understand something or you

need more assistance, please call:

Avanti Customer Service

800-220-5570

Keep proof of original purchase date (such as

your sales slip) with this guide to establish the

warranty period.

Write down the model and serial numbers.

You'll find them on a plate located on the rear

outside wall of the Beverage Cooler.

Please write these numbers here:

____________________________________

Date of Purchase

____________________________________

Model Number

____________________________________

Serial Number

Use these numbers in any correspondence or

service calls concerning your Beverage Cooler.

If you received a damaged Beverage Cooler,

immediately contact the dealer (or builder) that

sold you the Beverage Cooler.

Save time and money. Before you call for

service, check the Troubleshooting Guide. It

lists causes of minor operating problems that

you can correct yourself.

IF YOU NEED SERVICE

We're proud of our service and want you to be

pleased. If for some reason you are not happy

with the service you receive, here are some

steps to follow for further assistance.

FIRST, contact the people who serviced your

Beverage Cooler. Explain why you are not

pleased. In most cases, this will solve the

problem.

NEXT, if you are still not pleased, write all the

details, including your telephone number, and

send it to:

Customer Service

Avanti Products

10880 NW 30 Street

Miami, FL 33172 USA

CAUTION:

THIS BEVERAGE COOLER IS

NOT DESIGNED FOR THE

STORAGE OF MEDICINE OR

OTHER MEDICAL PRODUCTS.

PARTS & FEATURES

Control Panel

Interior Fan

Beverage Shelves (Total 3)

Front Grille

Top Hinge

Glass Door with Stainless Steel Frame

Stainless Steel Handle

Security Lock

(Not Shown – Front of Door)

Leveling Leg

ELECTRICAL CONNECTION

This appliance should be properly grounded for your safety. The power cord of this appliance is

equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the

possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied.

For personal safety, this appliance must be properly grounded.

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly

grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation

to have it replaced with a properly grounded 3-prong wall outlet.

The cord should be secured behind the appliance and not left exposed or dangling to prevent

accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage

rating that matches the rating label on the appliance. This provides the best performance and also

prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never

unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from

the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the appliance, be careful not to damage the power cord.

 EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do

not use an extension cord with this appliance. However, if you must use an extension cord it is

absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord

having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at

least 10 amperes.

 SURGE PROTECTOR

Most electrical appliances use a series of electric control boards to operate. These boards are very

susceptible to power surges and could be damaged or destroyed.

If the appliance is going to be used in an area or if your city / country is prone to power surges /

outages; it is suggested that you use a power surge protector for all electrical devices / appliances

you use. The surge protector that you select must have a surge block high enough to protect the

appliance it is connected to. If you have any questions regarding the type and size of surge protector

needed contact a licensed electrician in your area.

Damages due to power surges are not considered a manufacturer covered defect and will void your

product warranty.

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is

damaged, have it replaced by an authorized Avanti Products service center.

INSTALLATION INSTRUCTIONS

 BEFORE USING YOUR BEVERAGE COOLER

• Remove the exterior and interior packing.

• Check to be sure you have all of the following parts:

Instruction Manual

Beverage Shelves

Keys

1 Set

Stainless Steel Hinges for Door Swing Reversal

Hinge Screw caps

Stainless Steel Handle

• Before connecting this appliance to the power source, let it stand upright for approximately 2

hours. This will reduce the possibility of a malfunction in the cooling system from handling

during transportation.

• Clean the interior surface with lukewarm water using a soft cloth.

 INSTALLATION OF YOUR BEVERAGE COOLER

• This appliance is designed to be for free standing installation or built-in (fully recessed).

• Place your Beverage Cooler on a floor that is strong enough to support it when it is fully

loaded. To level your Beverage Cooler, adjust the front leveling legs at the bottom of the

Beverage Cooler.

• Locate the Beverage Cooler away from direct sunlight and sources of heat (stove, heater,

radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase

electrical consumption. Extreme cold ambient temperatures may also cause the unit not to

perform properly.

• Avoid locating the unit in moist areas.

• Plug the Beverage Cooler into an exclusive, properly installed-grounded wall outlet. Do not

under any circumstances cut or remove the third (ground) prong from the power cord. Any

questions concerning power and/or grounding should be directed toward a certified electrician

or an authorized Avanti Products service center.

 BUILT – IN CABINET INSTRUCTIONS

This unit is designed for both built-in or free standing installation. If you plan to use this unit in a built-

in application please follow the requirements shown to the right.

← Figure shown

Cabinet Opening Dimensions

IN (min)

MM (min)

Width

24”

610 mm

Depth

26”

661 mm

Height

35”

889 mm

Figure shown →

Unit Dimensions

IN (min)

MM (min)

Width

”

595 mm

Depth

(with handle)

”

620 mm

Depth

(without handle)

”

575 mm

Height

34 ¼”

870 mm

OPERATING YOUR BEVERAGE COOLER

It is recommended you install the beverage cooler in a place where the ambient temperature is

between 19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended

temperatures, the performance of the unit may be affected. For example, placing your unit in extreme

cold or hot conditions may cause interior temperatures to fluctuate. The range of 4ºC-10ºC (39ºF-

50ºF) may not be reached.

ON/OFF Power

To turn OFF the appliance, press the

button and hold 2 seconds.

Setting the temperature control

You can select temperature display setting from Fahrenheit to Celsius degree by touching the

button. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display

window.

If you desire to change the temperature, set the temperature as you desire by touching the

button. First press the

button. The numbers in the display window will flash. The temperature that

you desire to set will increase 1ºF or 1ºC if you touch the

button once; on the contrary the

temperature will decrease 1ºF or 1ºC if you touch the

button once.

NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes before

restarting the unit. If you attempt to restart before this time delay, the beverage cooler will not start.

When you use the beverage cooler for the first time or restart the beverage cooler after having been

shut off for a long time, there could be a few degrees variance between the temperature you select

and the one indicated on the LED readout. This is normal and it is due to the length of the activation

time. Once the beverage cooler is running for a few hours everything will be back to normal.

 STORAGE

Many cans and bottles may differ in size and dimensions. As such the actual number of bottles you

may be able to store may vary.

 INTERIOR LIGHT

• You can turn the interior light on or off by pushing the button marked

 DOOR LOCK

Your unit is provided with a lock and key combination.

The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock

and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making

sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.

 SHELVES

The appliance is equipped with three wired shelves. You can remove the shelf by lift up and pull it out

smoothly.

• To prevent damaging the door gasket, make sure to have the door all the way opened when

pulling the bottom shelf out of the rail compartment.

• For easy access to the storage content, you can pull the shelf approximately 30% out of the rail

compartment, however this unit was designed with a stopper on each side of the shelf track to

prevent bottles from falling.

CARE AND MAINTENANCE

 CLEANING YOUR BEVERAGE COOLER

• Turn off the power, unplug the appliance, and remove all items including shelves.

• Wash the inside surfaces with a warm water and baking soda solution. The solution should be

about 2 tablespoons of baking soda to a quart of water.

• Wash the shelves with a mild detergent solution.

• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any

electrical parts.

• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with

a clean soft cloth.

• Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless

steel with steel particles and rusting may occur.

 POWER FAILURE

• Most power failures are corrected within a few hours and should not affect the temperature of

your appliance if you minimize the number of times the door is opened. If the power is going to be

off for a longer period of time, you need to take the proper steps to protect your contents.

 MOVING YOUR BEVERAGE COOLER

• Remove all items.

• Securely tape down all loose items (shelves) inside your appliance.

• Tape the door shut.

• Be sure the appliance stays secure in the upright position during transportation. Also protect

outside of appliance with a blanket, or similar item.

 ENERGY SAVING TIPS

• The Beverage Cooler should be located in the coolest area of the room, away from heat

producing appliances, and out of the direct sunlight.

PROBLEMS WITH YOUR BEVERAGE COOLER?

You can solve many common Beverage Cooler problems easily, saving you the cost of a possible

service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

Beverage Cooler does not operate.

Not plugged in.

The appliance is turned off.

The circuit breaker tripped or a blown fuse.

Beverage Cooler is not cold enough.

Check the temperature control setting.

The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

Turns on and off frequently.

The room temperature is hotter than normal.

A large amount of contents has been added to

the Beverage Cooler.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The light does not work.

Not plugged in.

The circuit breaker tripped or a blown fuse.

The light button is turned off.

Vibrations.

Check to assure that the Beverage Cooler is

level.

The Beverage Cooler seems to make too much

noise.

The rattling noise may come from the flow of the

refrigerant, which is normal.

As each cycle ends, you may hear gurgling

sounds caused by the flow of refrigerant in your

Beverage Cooler.

Contraction and expansion of the inside walls

may cause popping and crackling noises.

The Beverage Cooler is not level.

The door will not close properly.

The door is misaligned.

The Beverage Cooler is not level.

The gasket is dirty.

The shelves are out of position.

Display flashes Error message “E1”

Temperature sensor failure.

Contact the Avanti Service Department –

1 - 800 – 220 - 5570

Display flashes Error message “E2”

Defrost sensor (Coil Sensor) failure.

Contact the Avanti Service Department –

1 - 800 – 220 – 5570

SERVICE FOR YOUR BEVERAGE COOLER

We are proud of our customer service organization and the network of professional service

technicians that provide service on your Avanti appliances. With the purchase of your Avanti

appliance, you can have the confidence that if you ever need additional information or assistance, the

Avanti Products Customer Service team will be here for you. Just call us toll-free.

AVANTI PRODUCTS CUSTOMER SERVICES

Product Information

800-323-5029

Whatever your questions are about our products,

help is available.

Part Orders

800-220-5570

You may order parts and accessories that will be

delivered directly to your home by personal

check, money order, Master Card, or Visa.

In-Home Repair Service

800-220-5570

An Avanti Products authorized service center will

provide expert repair service, scheduled at a time

that is convenient for you. Our trained servicers

know your appliance inside and out.

WIRING DIAGRAM

YOUR AVANTI PRODUCTS

WARRANTY

Staple your sales receipt here. Proof of original

purchase date is needed to obtain service under

warranty.

WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY

Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of

twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon

the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless

described in detail in the warranty document. For one year from the date of purchase by the original owner,

Avanti products will, at its option, repair or replace any part of the product which proves to be defective in

material or workmanship under normal use. Avanti Products will provide you with a reasonably similar product

that is either new or factory refurbished. During this period Avanti Products will provide all parts and labor

necessary to correct such defects free of charge, so long as the product has been installed and operated in

accordance with the written instructions in this manual. In rental or commercial use, the warranty period is 90

days. All Avanti appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service

center for repair.

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY

For the second through the fifth year from the date of original purchase, Avanti Products will provide a

replacement compressor free of charge due to a failure. You are responsible for the service labor and freight

charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Costs

involved to move the product to the service center and back to the user’s home, as maybe required, are the

user’s responsibility.

WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:

The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti

Products, including without limitation, one or more of the following:

•

A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,

regulations, or laws, including failure to install the product in strict conformity with local fire and building codes

and regulations.

• Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand,

floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity,

lightning, power surges, structural failures surrounding the appliance, and acts of God.

•

Content losses of food or other content due to

spoilage.

• Incidental or consequential damages

• Parts and labor costs for the following will not be

considered as warranty:

• Light bulbs and/or plastic housing.

• Plastic cabinet liners.

• Punctured evaporator that voids the warranty on

the complete sealed system.

• Shipping and handling costs associated with the

replacement of the unit.

• Repairs performed by unauthorized servicers.

• Service calls that are related to external problems,

such as abuse, misuse, inadequate electrical

power, accidents, fire, floods, or any other acts of

God.

• Failure of the product if it is used for other than it

intended purpose.

• The warranty does not apply outside the

Continental USA.

• Surcharges including but not limited to, any after

hour, weekend, or holiday service calls, tolls, ferry

trip charges, or mileage expense for service calls to

remote areas.

In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding

property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also

excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces

and exposed parts; Products on which the serial numbers have been altered, defaced or removed; service visits

for customer education, or visits where there is nothing wrong with the product; correction of installation problems

(you are solely responsible for any structure and setting for the product, including all electrical, plumbing and/or

other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation

cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.

OUT OF WARRANTY PRODUCT

Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including

repairs, pro-rates, or product replacement, once this warranty has expired.

WARRANTY – REFRIGERATION - COMPRESSOR

INSTRUCCIONES DE SEGURIDAD

ATENCION

INSTRUCCIONES PARA

LA CONEXION A TIERRA

Este aparato electrodoméstico debe estar conectado a tierra. En caso de un cortocircuito eléctrico, la

conexión a tierra reduce el riesgo de choque eléctrico proporcionando un cable a tierra con una

enchufe de conexión a tierra. Este enchufe debe estar conectado en un tomacorriente instalado

correctamente y conectado a tierra.

ADVERTENCIA – El uso inadecuado del enchufe de conexión a tierra puede resultar en un riesgo de

choque eléctrico. Consulte con un electricista o persona de reparaciones competente si no

comprenden bien las instrucciones de conexión a tierra o si existe alguna duda sobre si el aparato

esta conectado a tierra correctamente.

NO USE UN CORDON DE PROLONGACION ELECTRICA

Use un tomacorriente de pared exclusivo. No conecte su enfriador de bebidas a cordones de

prolongación eléctrica o junto a cualquier otro electrodoméstico en el mismo tomacorriente de pared.

ADVERTENCIA IMPORTANTE:

Una enfriador de bebidas vacía es una atracción muy peligrosa para los niños. Saque todas

las juntas, pestillos, tapas o puerta de todo electrodoméstico que no esté en uso, o tome

alguna medida para asegurar que no presente peligro.

INSTRUCCIONES DE INSTALACION

Saque los embalajes exteriores, limpie bien el exterior con un paño suave seco, y el interior con un

paño húmedo y tibio. Evite colocar el enfriador de bebidas cerca de una fuente de calor, luz de sol

directa, o lugar húmedo.

Ubicación

1. Seleccione un lugar con su piso fuerte y nivelado.

2. Evite la luz directa del sol o calor. La luz directa del sol puede afectar la capa de acrílico.

Las fuentes de calor en su proximidad provocarán un consumo mayor de electricidad.

OPERACION

Para evitar vibraciones, la unidad debe estar bien nivelada. La temperatura variará dependiendo de

la cantidad de botellas almacenadas y la frecuencia con que se abre la puerta.

Cuando el enfriador de bebidas no se use por un período largo, desconecte el enchufe y deje la

puerta entreabierta.

Nota: Espere entre 3 a 5 minutos antes de volver a encender si el funcionamiento ha sido

interrumpido.

Se recomienda que Ud coloque su enfriador de bebidas en un lugar donde la temperatura ambiental

se mantenga entre 23-25 grados centígrados.

Si la temperatura ambiental oscila afuera de esos límites, pueda afectar la temperatura de la caja.

Por ejemplo, si su unidad está situada en lugares donde hay temperaturas muy frías o calientes

también puede afectar la temperatura de la caja.

CONTROL DE TEMPERATURAS

ENCENDIDO/APAGADO

Para apagar el enfriador de vino, presione el botón ( ) y manténgalo oprimido por un mínimo de 3

segundos.

Ud. puede seleccionar los grados centigrados o Fahrenheit presionando él botón marcado .

En la pantalla digital aparecerá el F o C indicador en color verde.

Operación

Oprima el botón marcado “ localizado en el panel de controles para programar la

temperatura. Al oprimir el botón marcado “ por primera vez, el indicador en la pantalla

mostrará la temperatura programada de fábrica o la más reciente.

Oprima el botón marcado ( ) una vez y la temperatura aumentará un grado. Si Ud oprime el

botón marcado ( ) una vez la temperatura bajará un grado.

El rango de temperatura de su enfriador de bebidas es de 39º a 50ºF (4º a 10ºC).

Luz interior

La luz interior se controla manualmente y no funciona al abrir ni cerrar la puerta. Para prender o

apagar la luz, presione el boton marcado ( ) de la luz ubicado en el panel de control.

Cerradura de la puerta

Su unidad viene equipada con una combinación de cerradura y llave.

Las llaves (2) están dentro de la bolsa plástica junto al manual de instrucciones.

Introduzca la llave en la cerradura y gírela hacia la izquierda para abrir la puerta.

Para cerrarla, gire la llave hacia la derecha.

Quite la llave y colóquela en un lugar seguro para evitar que se pierda.

Descongelación

Su nevera ha sido diseñada con un sistema de descongelación de “ciclo automático”.

Las superficies refrigeradas del compartimiento para bebidas se descongela automáticamente,

durante el ciclo “apagado” del control de enfriamiento (termostato). El agua descongelada del

compartimiento es eliminada automáticamente, encauzándola hacia una bandeja de goteo ubicada

en el compresor. La transferencia de calor del compresor evapora el agua.

NOTA:

Para remover la repisa corrediza superior, vacíe la repisa antes de sacarla. Hálela aproximadamente

la mitad hacia afuera hasta que el raíl se alinee con el poste plástico en ambos lados.

Levante la repisa y sáquela suavemente de la unidad. Para reemplazar de nuevo la repisa, repita los

pasos anteriores en dirección opuesta.

CUIDADO Y MANTENIMIENTO

Limpieza

Para limpiar el interior, use un paño suave con una solución de una cucharada de bicarbonato de

sodio por cada cuarto de agua, o una solución de espuma de jabón suave, o un detergente suave.

Para lavar las rejillas, sáquelas deslizándolas con cuidado, y use una solución de detergente suave;

luego séquelas con un paño suave. Limpie el exterior con un paño húmedo suave y un poco de

detergente suave o productos de limpieza para electrodomésticos.

Período de vacaciones

Para períodos cortos de vacaciones, deje los controles en la posición normal. Durante ausencias

más largas;

(a) saque todas las botellas,

(b) desconecte el enfriador de bebidas del tomacorriente,

(d) deje la puerta abierta para evitar la formación de condensación, moho u olores.

Corte de corriente

La mayoría de los cortes de corriente se corrigen en una o dos horas y no afectarán las temperaturas

de su enfriador de bebidas. Sin embargo, Ud. deberá reducir la cantidad de veces que abra la puerta

cuando la corriente esté apagada.

Si Ud. se muda

Saque o asegure todos los artículos dentro de su enfriador de bebidas. Para evitar que los tornillos

nivelantes se averíen, gírelos completamente hacia la base.

Algunas reglas importantes para el uso correcto de el enfriador de bebidas.

• Las bebidas se deben guardar en botellas cerradas.

• No sobrecargue el compartimiento interior.

• No abra la puerta a menos que sea necesario.

• Si el enfriador de bebidas se guardará sin uso por períodos largos, se sugiere que, luego de una

limpieza cuidadosa, se deje la puerta entreabierta para permitir que el aire circule dentro de la

caja y evitar una posible formación de condensación, moho u olores.

• Nunca cubra los estantes del compartimiento para bebidas con papel de aluminio o cualquier otro

material para cubrir estantes que puedan obstruir la circulación del aire.

ADVERTENCIA

Asegúrese de tener la puerta abierta completamente se Ud desea remover la repisa superior o

moverla hacia adelante para extraer una botella.

Registration Information

Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the

following address within 100 days from the date of purchase and receive these important benefits:

Avanti Products LLC

P.O.Box 520604 – Miami, Florida 33152

 Protect your product:

We will keep the model number and date of purchase of your new Avanti product on file to

help you refer to this information in the event of an insurance claim such as fire or theft.

 Promote better products:

We value your input. Your responses will help us develop products designed to best meet

your future needs.

-------------------------------------------------------(detach here)--------------------------------------------------------------

Avanti Registration Card

Name

Model # Serial #

Address

Date Purchased Store / Dealer Name

City State Zip

E-mail Address

Area Code Phone Number

Occupation

Did You Purchase An Additional Warranty

As your Primary Residence, Do You:

 Extended

 Own  Rent



None

Your Age:

Reason for Choosing This Avanti Product:

Please indicate the most important factors

That influenced your decision to purchase

this product:

 under 18  18-25  26-30

 31-35  36-50  over 50

Marital Status:



Married



Single



Price

 Product Features

 Avanti Reputation

 Product Quality

 Salesperson Recommendation

 Other: ___________________

 Friend / Relative Recommendation

 Warranty



Other: ___________________

Is This Product Used In The:

 Home  Business

How Did You Learn About This Product:

 Advertising

 In-Store Demo

 Personal Demo

Comments:

BCA516SS – 12162014 Revised

PRINTED IN CHINA

Avanti BCA516SS Manual de usuario

Marca: Avanti

Modelo: BCA516SS

Categoría: Enfriadores de bebidas

Tipo: Manual de usuario

Descargar PDF

informe

en otros idiomas

English: Avanti BCA516SS User manual

Avanti BCA516SS Manual de usuario

Avanti BCA516SS Manual de usuario

en otros idiomas

Artículos relacionados

Otros documentos