Avanti SBCA017G Manual de usuario

Marca: Avanti

Modelo: SBCA017G

Categoría: Enfriadores de bebidas

Tipo: Manual de usuario

El Avanti SBCA017G es un enfriador de bebidas independiente con tecnología de refrigeración de tubo térmico superconductor (sin compresor) que puede enfriar rápidamente tus bebidas favoritas. Con una capacidad de 170 latas, este refrigerador de bebidas compacto es perfecto para espacios pequeños o como una unidad adicional en tu cocina, sala de estar o patio.

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS.

La sección en español empieza en la página 13.

Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications

without notice.

Avanti Products, A Division of the Mackle Co., Inc.

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

Beverage Center / Enfriador de Bebidas

Model Numbers

Nos. de Modelos:

SBCA017G

SBCA017GL

Color: Black / Negro

TABLE OF CONTENTS

Beverage Cooler Safety 4

Important Safeguides 5

Parts and Features 6

Important Safety Instructions 7

Installation Instructions 7

Before Using Your Beverage Cooler 7

Installation of Your Beverage Cooler 7

Electrical Connection 8

Operating Your Beverage Cooler 9

Temperature Control 9

Interior Light 9

Care and Maintenance 9

Defrosting Your Beverage Cooler 9

Cleaning Your Beverage Cooler 9

Power Failure 10

Vacation Time 10

Moving Your Beverage Cooler 10

Energy Saving Tips 10

Troubleshooting Guide 10

Service for Your Beverage Center 11

Your Avanti Products Warranty 12

Instrucciones en Español 13 - 14

Registration Information / Registration Card 15

BEVERAGE COOLER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual for your appliance. Always read

and obey all safety messages.

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that

can kill or injure you and others. All safety messages will follow the Safety

Alert Symbol and either the words ” DANGER”, “WARNING” or “CAUTION”.

Danger means that failure to heed this

safety statement may result in severe

personal injury or death.

Warning means that failure to heed this

safety statement may result in extensive

product damage, serious personal injury, or

death.

Caution means that failure to heed this

safety statement may result in minor or

moderate personal injury, property or

equipment damage.

All safety messages will alert to know what potential hazard is, tell you how to reduce the chance of

injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUIDES

Before the Beverage Cooler is used, it must be properly positioned and installed as

described in this manual,so read the manual carefully. To reduce the risk of fire,

electrical shock or injury when using the Beverage Cooler, follow basic precaution,

including the following:

 Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and

do not use an extension cord.

 It is recommended that a separate circuit, serving only your Beverage Cooler be provided. Use

receptacles that cannot be turned off by a switch or pull chain.

 Never clean Beverage Cooler parts with flammable fluids. These fumes can create a fire hazard

or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity

of this or any other appliance. The fumes can create a fire hazard or explosion.

 Before proceeding with cleaning and maintenance operations, make sure the power line of the

unit is disconnected.

 Do not connect or disconnect the electric plug when your hands are wet.

 Unplug the Beverage Cooler or disconnect power before cleaning or servicing. Failure to do so

can result in electrical shock or death.

 Do not attempt to repair or replace any part of your Beverage Cooler unless it is specifically

recommended in this manual. All other servicing should be referred to a qualified technician.

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

 Use two or more people to move and install Beverage Cooler. Failure to do so can result in back

or other injury.

 To ensure proper ventilation for your Beverage Cooler, the front of the unit must be completely

unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below

90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain,

water spray or drips.

 The Beverage Cooler should not be located next to ovens, grills or other sources of high heat.

 The Beverage Cooler must be installed with all electrical connections in accordance with state

and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in

accordance with the National Electrical Code and local codes and ordinances is required.

 Do not kink or pinch the power supply cord of Beverage Cooler.

 The fuse (or circuit breaker) size should be 2.5 amperes.

 It is important for the Beverage Cooler to be leveled in order to work properly. You may need to

make several adjustments to level it.

 Never allow children to operate, play with or crawl inside the Beverage Cooler.

 Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may

damage or discolor the interior.

 Do not use this apparatus for other than its intended purpose.

PARTS & FEATURES

1 Temperature Control Knob

LED Interior Light ON / OFF Switch

2 Back Cover 9

Upper Hinge

3 Ventilation Holes 10

Door Handle

4 Shelves (2) 11

Door Gasket

5 Cold Sink Fan 12

Glass Door

6 Legs 13

Lock

(Model SBCA017GL ONLY)

7 Cabinet Liner 14

Bottom hinge

Lock bracket

(Model SBCA017GL ONLY)

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury

when using your Beverage Cooler, follow these

basic precautions:

 Read all instructions before using the Beverage Cooler.

 DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned

appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

 Before you throw away your old Beverage Cooler: Take off the door. Leave the shelf in

place so that children may not easily climb inside.

 Never allow children to operate, play with, or crawl inside the Beverage Cooler.

 Never clean Beverage Cooler parts with flammable fluids. The fumes can create a fire hazard

or explosion.

 Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or

any other Beverage Cooler. The fumes can create a fire hazard or explosion.

 Do not repair or replace any part of the Beverage Cooler or attempt any servicing unless

specifically recommended in the user-maintenance instructions or in published user-repair

instructions. Replace the fuse with the same type.

-Save these instructions-

INSTALLATION INSTRUCTIONS

 Before Using Your Beverage Cooler

 Remove the exterior and interior packing.

 Check to be sure you have all of the following parts:

 2 Shelves

 1 Instruction manual

 Additional 2 keys(For model SBCA017GL only)

 Clean the interior surface with lukewarm water using a soft cloth.

 Installing Your Beverage Cooler

 This Beverage Cooler uses superconductor heat-pipe refrigeration technology (no

compressor).

 This appliance is designed to be free standing only, and should not be recessed or built-in

(Fully recessed).

 Place your Beverage Cooler on a floor that is strong enough to support the Beverage Cooler

when it is fully loaded.

 Allow 5 inches of space between the back and sides of the Beverage Cooler, which allows

the proper air circulation to cool the heat sink.

 Locate the Beverage Cooler away from direct sunlight and sources of heat (stove, heater,

radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase

electrical consumption. Extreme cold ambient temperatures may also cause the Beverage

Cooler not to perform properly.

 Avoid locating the Beverage Cooler in moist areas.

 Plug the Beverage Cooler into an exclusive, properly installed-grounded wall outlet. Do not

under any circumstances cut or remove the third (ground) prong from the power cord. Any

questions concerning power and/or grounding should be directed toward a certified electrician

or an authorized service center.

 After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before

placing food in the Beverage Cooler compartment.

 ELECTRICAL CONNECTION

This appliance should be properly grounded for your safety. The power cord of this appliance is

equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the

possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied.

For personal safety, this appliance must be properly grounded.

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly

grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation

to have it replaced with a properly grounded 3-prong wall outlet.

The cord should be secured behind the appliance and not left exposed or dangling to prevent

accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage

rating that matches the rating label on the appliance. This provides the best performance and also

prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never

unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from

the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the appliance, be careful not to damage the power cord.

 EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do

not use an extension cord with this appliance. However, if you must use an extension cord it is

absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord

having a grounding type plug and outlet and that the electrical rating of the cord be 300 volts and at

least 10 amperes.

 SURGE PROTECTOR

Most electrical appliances use a series of electric control boards to operate. These boards are very

susceptible to power surges and could be damaged or destroyed.

If the appliance is going to be used in an area or if your city / country is prone to power surges /

outages; it is suggested that you use a power surge protector for all electrical devices / appliances

you use. The surge protector that you select must have a surge block high enough to protect the

appliance it is connected to. If you have any questions regarding the type and size of surge protector

needed contact a licensed electrician in your area.

Damages due to power surges are not considered a manufacturer covered defect and will void your

product warranty.

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is

damaged, have it replaced by an authorized service center.

TO PREVENT LIQUIDS FROM FREEZING YOU MUST ADJUST THE TEMPERATURE CONTROL

TO THE MEDIUM SETTING AFTER THE INITIAL 24 HOUR PERIOD OF USE.

OPERATING YOUR BEVERAGE COOLER

 Temperature Control

 Setting the Temperature Control

 Your Beverage Cooler has only one control for regulating the temperature. The temperature

control is located on the upper right hand corner of the compartment.

 To control the internal temperature, adjust the control knob according to the ambient

temperature or purpose of use.

 The first time you turn the unit on, set the temperature control to “HI”.

 The range of the temperature control is from position "OFF” to “HI”.

 After 24 hours, adjust the temperature control to the setting that best suites your needs. The

setting of “MED” should be appropriate for home or office Beverage Cooler use.



NOTE:

 Turning the temperature control to "OFF" position stops the cooling cycle but does not shut off the

power to the appliance.

 Interior Light

This Beverage Cooler is provided with a LED light located on the top of the compartment. The light is

manually activated and will not be on when the door is opened and be off when the door is closed. To

turn the light ON / OFF use the switch located and the top right hand side of the unit.

CARE AND MAINTENANCE

 Defrosting Your Beverage Cooler

This model uses a superconductor heat-pipe cooling system with automatic defrosting system so

there is no need to defrost it manually.

 Cleaning Your Beverage Cooler

 UNPLUG the Beverage Cooler, and remove the shelf.

 Wash the inside surfaces with a warm water and baking soda solution. The solution should be

about 2 tablespoons of baking soda to a quart of water.

 Wash the shelf with a mild detergent solution.

 The outside of the Beverage Cooler should be cleaned with mild detergent and warm water.

 Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any

electrical parts.

 Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry

with a clean soft cloth.

CAUTION

Failure to unplug the Beverage Cooler could result in electrical shock or personal injury.

 Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your

Beverage Cooler if you minimize the number of times the door is opened. If the power is going to be

off for a longer period of time, you need to take the proper steps to protect your food.

 Vacation Time

 Short vacations: Leave the Beverage Cooler operating during vacations of less than three

weeks.

 Long vacations: If the appliance will not be used for several months, remove all food and unplug

the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave

the door open slightly: blocking it open if necessary.

 Moving Your Beverage Cooler

 Securely tape down all loose items inside your Beverage Cooler.

 Tape the door shut.

 Protect the outside of Beverage Cooler with a blanket, or similar item.

 Energy Saving Tips

 The Beverage Cooler should be located in the coolest area of the room, away from heat

producing appliances, and out of the direct sunlight.

 Overloading the Beverage Cooler forces the superconductor cooling system to run longer.

 Reduce door openings and extended searches, remove as many item as needed at one time,

and close the door as soon as possible.

 One characteristic of superconductor heat-pipe units is the length of time it requires to

recover from having the door opened and shut frequently. It may be necessary to wait longer

for the temperature to return to its former level once the door has been opened for too long.

This is normal for the type of unit.

PROBLEMS WITH YOUR BEVERAGE COOLER?

You can solve many common Beverage Cooler problems easily, saving you the cost of a possible

service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

PROBLEM POSSIBLE CAUSE

Beverage Cooler does not operate.

Not plugged in.

The circuit breaker tripped or a blown fuse.

The appliance temperature control is set at “OFF” position.

Beverage Cooler is not cold enough. The room temperature is hotter than normal.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The Beverage Cooler does not have the correct clearances.

Abnormal voltage.

The light does not work.

Not plugged in.

The circuit breaker tripped or a blown fuse.

The LED light has burned out.

Vibrations. Check to assure that the Beverage Cooler is level.

The door will not close properly.

The Beverage Cooler is not level.

The door was reversed and not properly installed.

The gasket is dirty.

The shelves, bins, or baskets are out of position.

SERVICE FOR YOUR BEVERAGE COOLER

We are proud of our customer service organization and the network of professional service

technicians that provide service on your Avanti Beverage Coolers. With the purchase of your Avanti

Beverage Cooler, you can be confident that if you ever need additional information or assistance, the

Avanti Products Customer Service team will be here for you. Just call us toll-free.

AVANTI PRODUCTS CUSTOMER SERVICES

Product Information

800-323-5029

Whatever your questions are about our products,

help is available.

Part Orders

800-220-5570

You may order parts and accessories that will be

delivered directly to your home, by personal

check, money order, Master Card, or Visa.

In-Home Repair Service

800-220-5570

An Avanti Products authorized service center will

provide expert repair service, scheduled at a time

that is convenient for you. Our trained servicers

know your Beverage Cooler inside and out.

WIRING DIAGRAM

YOUR Avanti Products WARRANTY

Staple your sales receipt here. Proof of

original purchase date is needed to obtain

service under warranty.

WHAT IS COVERED

LIMITED ONE-YEAR

WARRANTY

For one year from the date of

purchase by the original owner, Avanti

Products will, at its option, repair or

replace any part of the Beverage

Cooler, which proves to be defective

in material or workmanship under

normal use. During this period Avanti

Products will provide all parts and

labor necessary to correct such

defects free of charge, so long as the

Beverage Cooler has been installed

and operated in accordance with the

written instructions in this manual. In

rental or commercial use, the warranty

period is 90 days. Avanti Products will

provide you with a reasonably similar

replacement product that is either new

or factory refurbished All Avanti

Appliances of 3.5 cubic feet capacity

or less must be brought/sent to the

appliance service shop for repair.

 Content losses of food due to spoilage.

 Incidental or consequential damages.

 Parts and labor costs for the following will

not be considered as warranty:

 Evaporator doors, door springs, and/or

frames.

 Inner door panels, door shelves, door

rails, and/or door supports.

 Light and/or plastic housing.

 Plastic cabinet liners.

 Punctured evaporator that voids the

warranty on the complete sealed system.

 Shipping and handling costs associated

with the replacement of the unit.

 Repairs performed by unauthorized

servicers.

 Service calls that do not involve defects in

material or workmanship such as

customer education, door reversal, or

proper installation.

 Surcharges including, but not limited to,

any after hour, weekend, or holiday

service calls, tolls, ferry trip charges, or

mileage expense for service calls to

remote areas, including the State of

Alaska.

 Service calls that are related to external

problems, such as abuse, misuse,

inadequate electrical power, accidents,

fire, floods, or acts of God.

 Replacement of house fuses or resetting

circuit breakers.

 Failure of the product if it is used for other

than its intended purpose.

 This warranty does not apply outside the

Continental USA.

WHAT IS NOT COVERED

INSTRUCCIONES EN ESPAÑOL

INSTALACION

Retire los accesorios de empaque (plásticos protectores, cartón y tiras engomadas). Limpie el

exterior con un trapo suave y seco, y el interior con un trapo húmedo y tibio.

UBICACION

1. Seleccione un lugar con un piso firme y nivelado.

2. Su refrigerador requiere ventilación. Deje un espacio mínimo de HI” hacia arriba y espacio

suficiente en el respaldo para permitir la circulación de aire.

3. Las bodegas de tecnología de superconductores necesitan cierto tiempo de recuperación

cuando la puerta se abre y se deja abierta por mucho tiempo. Esto es normal para este tipo

de unidad.

4. Evite luz directa del sol o calor. La luz directa del sol puede afectar la capa de pintura. Las

fuentes de calor en su proximidad causarán un consumo mayor de electricidad.

5. Para un mejor desempeño, nivele el refrigerador utilizando las patas ajustables o tornillos

niveladores.

INSTRUCCIONES PARA LA CONECCION A TIERRA

Este aparato electrodoméstico debe estar conectado a tierra. En caso de un cortocircuito eléctrico, la

conección a tierra reduce el riesgo de choque eléctrico proporcionando un cable de escape para la

corriente eléctrica. Este aparato viene equipado con un cordón que posee un cable a tierra con un

enchufe de conección a tierra. Este enchufe debe estar conectado en un tomacorriente instalado

correctamente y conectado a tierra.

ADVERTENCIA

El uso inadecuado del enchufe de conección a tierra puede resultar en un riesgo de choque eléctrico.

Consulte con un electricista si no comprende bien las instrucciones de conección a tierra o si existe

alguna duda sobre si el aparato está conectado a tierra correctamente.

NO USE UN CORDON DE EXTENSION ELECTRICA

Use un tomacorriente de pared exclusivo. No conecte su refrigerador a cordones de prolongación

eléctrica o junto a cualquier otro electrodoméstico en el mismo tomacorriente de pared.

ADVERTENCIA IMPORTANTE:

Un refrigerador vacío es una atracción muy peligrosa para los niños. Quite los sellos magnéticos,

puertas o cerraduras de todo electrodoméstico que esté en uso.

OPERACION

Enchufe el cable a la toma de corriente, que debe ser 115-120v A/C, 10 AMP ó más. Para evitar

vibraciones, la caja debe estar bien nivelada. Para encender el refrigerador, gire el control de

temperatura a la posición “HI”. Después de 24 horas, gire la perilla a la posición deseada. Se

recomienda la posición “MED” bajo condiciones normales.

LUZ INTERIOR

Su refrigerador tiene luz interior que localizada en la parte superior del interior. Para encender o

apagar la luz. La luz está ubicada en la parte superior del compartimiento.

COMO DESCONGELAR

Coloque el dial del termostato “OFF” (apagado). El descongelado generalmente tarda pocas horas.

Para descongelar rápido vacío el refrigerador y deje la puerta abierta. Nunca use un cuchillo u otro

instrumento metálico para rascar el hielo o la escarcha del congelador.

CUIDADOS EN LOS PERIODOS DE AUSENCIA

 Para cortos períodos de ausencia (menos de 21 días) el congelador podrá quedar

funcionando. Coloque el botón de control de temperaturas en la posición mínima.

 En períodos de ausencia más largos, se aconseja dejar el refrigerador limpio y

desconectado.

 Saque todo lo que tenga adentro del refrigerador y haga el deshielo y la limpieza general.

OPERACIÓN

Enchufe el cable a la toma de corriente, que debe ser 115-120v A/C, 10 AMP ó más. Para evitar

vibraciones, la caja debe estar bien nivelada. Para encender el refrigerador, gire el control de

temperatura a la posición “OFF”. Para prevenir la congelación de liquidos mueva el dial a la posición

“MED” después de las primeras 24 horas de uso.

También retire las cubeteras, limpie bien y séquelas internamente.

 Deje la puerta entreabierta para que penetre el aire y así evitar la formación de olores.

ECONOMIA DE ENERGIA

 Evite dejar por mucho tiempo la puerta abierta.

 Evite aperturas frecuentes de la puerta.

 Nunca coloque alimentos calientes dentro del refrigerador. Espere que estén a una

temperatura ambiental.

 Coloque el botón de control de temperaturas en la posición adecuada.

SI USTED SE VA DE VACACIONES

 Saque todos los artículos del refrigerador-congelador si Ud. se va de vacaciones por un mes

o más.

 Desconecte el refrigerador del tomacorriente y limpie el refrigerador bien.

 Deje la puerta abierta para evitar la formación de olores, condensación o moho.

SI USTED SE MUDA

 Desconecte el refrigerador del tomacorriente y limpie el refrigerador bien. Saque todas las

partes movibles y empaquételas para que no se muevan durante la transportación.

 Cierre la puerta del refrigerador y séllela con cinta adhesiva.

 Asegúrese que el refrigerador va parado durante el viaje y cúbralo con una frazada.

Registration Information

Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the

following address within 100 days from the date of purchase and receive these important benefits:

Avanti Products, A Division of The Mackle Co., Inc.

P.O.Box 520604 – Miami, Florida 33152

 Protect your product:

We will keep the model number and date of purchase of your new Avanti product on file to

help you refer to this information in the event of an insurance claim such as fire or theft.

 Promote better products:

We value your input. Your responses will help us develop products designed to best meet

your future needs.

-------------------------------------------------------(detach here)--------------------------------------------------------------

Avanti Registration Card

Name Model # Serial #

Address Date Purchased Store / Dealer Name

City State Zip E-mail Address

Area Code Phone Number Occupation

Did You Purchase An Additional Warranty As your Primary Residence, Do You:

 Extended  Own  Rent

 None

Your Age:

Reason for Choosing This Avanti Product:

Please indicate the most important factors

That influenced your decision to purchase

this product:

 under 18  18-25  26-30

 31-35  36-50  over 50

Marital Status:

 Married  Single

 Price

 Product Features

 Avanti Reputation

 Product Quality

 Salesperson Recommendation

 Other: ___________________

 Friend / Relative Recommendation

 Warranty

 Other: ___________________

Is This Product Used In The:

 Home  Business

How Did You Learn About This Product:

 Advertising

 In-Store Demo

 Personal Demo

Comments:

AV02-09072010 PRINTED IN CHINA

Avanti SBCA017G Manual de usuario

Marca: Avanti

Modelo: SBCA017G

Categoría: Enfriadores de bebidas

Tipo: Manual de usuario

Descargar PDF

informe

En otros idiomas

English: Avanti SBCA017G User manual

Avanti SBCA017G Manual de usuario

Avanti SBCA017G Manual de usuario

En otros idiomas

Documentos relacionados