Magnavox MWC13D6 Manual de usuario

Marca: Magnavox

Modelo: MWC13D6

Tipo: Manual de usuario

Este manual también es adecuado para

Owner's Manual

6513DG

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER'S MANUAL,

PLEASE CALL

TOLL FREE 1-800-968-3429 OR VISIT OUR WEB SITE AT

http://www.SylvaniaConsumerElectronics.com

13 inch COLOR TV/DVD

INSTRUCCIONES EN ESPAÑOL INCLUDAS

FEATURES

• Auto Channel Programming

• Screen Saver

• Auto Power Off

• Parental Lock

• Resume Play

• Closed Caption Decoder

PLEASE READ BEFORE USING THIS EQUIPMENT

P Owner's Manual

(1EMN21312)

P Remote Control

(NF100UD)

P AA batteries x 2

Owner's Manual

SUPPLIED ACCESSORIES

This unit comes with the following accessories. Please confirm that

all the accessories are included.

T8200UA(EN).QX3 06.2.6 0:02 PM Page 1

RECAUTIONS

The caution marking is located on the rear of the cabinet.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE CONSTITUTING

A RISK OF ELECTRIC SHOCK IS

PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

MPORTANT SAFEGUARDS

1. Read instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

Cleaning - Unplug the unit from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted ser-

vice and, that for some specific reason, such as the possibili-

ty of the loss of an authorization code for a CATV converter,

is not intended to be unplugged by the user for cleaning or

any other purpose, may exclude the reference to unplugging

the appliance in the cleaning description otherwise required

in item 5.

6. Attachments - Do not use attachments not recommended

by the unit manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this unit near water - for

example, near a bath tub, wash bowl, kitchen sink, or laun-

dry tub, in a wet basement, or near a swimming pool, and

the like.

8. Accessories - Do not place this unit on an

unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury to

someone, and serious damage to the appli-

ance. Use only with a cart, stand, tripod, brack-

et, or table recommended by the manufacturer,

or sold with the unit. Any mounting of the appli-

ance should follow the manufacturer’s instructions and

should use a mounting accessory recommended by the

manufacturer. An appliance and cart combination should be

moved with care. Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart combination to

overturn.

Ameubles - Cet appareil ne doit être placé

que sur un meuble (avec ou sans roulettes)

recommandé par le fabricant. Si vous l’installez

sur un meuble à roulettes, déplacez les deux

ensembles avec précaution. Un arrêt brusque,

l’utilisation d’une force excessive et des sur-

faces irrégulières risquent de déstabiliser l’ensemble et de le

renverser.

9. Ventilation - Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the unit and to protect it from overheating, and

these openings must not be blocked or covered. The open-

ings should never be blocked by placing the unit on a bed,

sofa, rug, or other similar surface. This unit should never be

placed near or over a radiator or heat register. This unit

should not be placed in a built-in installation such as a book-

case or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

10. Power Sources - This unit should be operated only from the

type of power source indicated on the marking label. If you

are not sure of the type of power supply to your home, con-

sult your appliance dealer or local power company. For the

units intended to operate from battery power, or other

sources, refer to the operating instructions.

11. Grounding or Polarization - This unit is equipped with a

polarized alternating-current line plug (a plug having one

blade wider than the other). This plug will fit into the power

outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to fit, contact your elec-

trician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

12. Power-Cord Protection - Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

13. Outdoor Antenna grounding - If an outside antenna or

cable system is connected to the unit, be sure the antenna

or cable system is grounded so as to provide some protec-

tion against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA No.

70, provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding conduc-

tors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding

electrode. (Fig. A)

PORTABLE CART WARNING

S3126A

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC - NATIONAL ELECTRICAL CODE

S2898A

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

T8200UA(EN).QX3 06.2.6 0:02 PM Page 2

PRECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellec-

tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is

intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC WARNING-

This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the

owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or

modification is made.

14. Lightning - For added protection for this unit receiver during

a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the unit due to lightning and power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other elec-

tric light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this unit through openings as they may touch dangerous

voltage points or short out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the unit.

18. Servicing - Do not attempt to service this unit yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified ser-

vice personnel.

19. Damage Requiring Service - Unplug this unit from the wall

outlet and refer servicing to qualified service personnel

under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operat-

ing instructions. Adjust only those controls that are covered

by the operating instructions, as improper adjustment of

other controls may result in damage and will often require

extensive work by a qualified technician to restore the unit to

its normal operation.

e. If the unit has been dropped or damaged in any way.

f. When the unit exhibits a distinct change in performance, this

indicates a need for service.

20. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21. Safety Check - Upon completion of any service or repairs to

this unit, ask the service technician to perform routine safety

checks to determine that the unit is in proper operating con-

dition.

22. Heat - This unit product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

T8200UA(EN).QX3 06.2.6 0:02 PM Page 3

The serial number of this product may be found on the back of the unit. No other unit has the same serial

number as yours. You should record the number and other vital information here and retain this book as a

permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

NOTE ABOUT RECYCLING

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU'AU FOND.

LOCATION

For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place

for its installation:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the

top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

• Install unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the unit near strong magnetic fields.

• Avoid moving unit to locations where temperature differences are extreme.

• Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our

Authorized Service Center for servicing.

• Do not put your fingers or objects into the unit disc loading tray.

• Do not place anything directly on top of the unit.

MOISTURE WARNING

• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or

after heating a cold room or under conditions of high humidity. If you play a videotape or DVD in a moist

unit, it may damage the tape or DVD and the unit. When the condensation occurs inside the unit, turn the

unit on and leave it at least 2 hours to dry out.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-

lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system

of the building as close to the point of cable entry as practical.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service

this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.

DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

T8200UA(EN).QX3 06.2.6 0:02 PM Page 4

ABLE OF CONTENTS

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . .2

TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . .5

SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . .5

PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6

ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . .6

CONNECTING TO AN EXTERNAL DEVICE (FRONT)

. .7

INSTALLING THE BATTERIES IN REMOTE CONTROL

OPERATING CONTROLS AND FUNCTIONS . . .8

TV SECTION

TV OPERATION AND SETTINGS . . . . . . . . . . . .9

INITIAL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . .9

WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . .9

SLEEP TIMER / PICTURE CONTROL . . . . . . . . . .10

CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . .10

CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . .11

ON-SCREEN MENU LANGUAGE . . . . . . . . . . . . .11

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12

DVD SECTION

ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . .14

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . .14

UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . .14

PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . .15

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .15

DISC MENU / TITLE MENU . . . . . . . . . . . . . . . . . .15

SPECIAL PLAYBACK FUNCTIONS & SETTINGS . . .

FUNCTION TABLE . . . . . . . . . . . . . . . . . . . . . . . .16

AUDIO MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . .17

ANGLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

BLACK LEVEL MENU . . . . . . . . . . . . . . . . . . . . . .18

SEARCH MENU . . . . . . . . . . . . . . . . . . . . . . . . . .18

REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .19

PROGRAMMED PLAYBACK . . . . . . . . . . . . . . . . .20

RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . .20

ON-SCREEN INFORMATION . . . . . . . . . . . . . .20

CHANGING THE DVD SET UP ITEMS . . . . . . .21

CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . .21

INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . .24

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .26

APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

CABLE CHANNEL DESIGNATIONS . . . . . . . . . . .27

LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . .27

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .28

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .29

WARRANTY . . . . . . . . . . . . . . . . . .BACK COVER

IMPORTANT SAFEGUARDS / TABLE OF CONTENTS

QUICK

SYMBOLS USED IN THIS MANUAL

The following symbols below appear in some headings and notes in this manual, with the following meanings.

Description refers to TV operation

(in the TV mode).

Description refers to playback of

DVD video discs (in the DVD mode).

Description refers to playback of

audio CDs (in the DVD mode).

Description refers to the items

to be set by the QUICK mode

(in the DVD mode).

T8200UA(EN).QX3 06.2.6 0:02 PM Page 5

REPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

ANT.

Cable

TV signal

Antenna

ANT.

OUT

Rear of the unit

*NOTE

(DO NOT DISCONNECT FROM BOX)

Some cable TV systems use scrambled

signals and require a special converter to

receive these channels. Consult your local

cable company.

Incoming cable from home

Antenna / Cable Company

(No Cable Box)

Incoming cable from Cable Company

or Satellite Antenna

Cable Box or Satellite Box*

NOTE:

Before plugging the antenna into

the ANT. jack of the unit, check

that the pin is not bent. If it is bent,

straighten the pin as illustrated,

then plug the pin into the ANT. jack

of the unit.

Bent pin

Cable

Plug

(Needs to be

straightened)

(Straight pin)

For your safety and to

avoid damages to the unit,

unplug the antenna cable

from the ANT. jack before

moving the unit.

Plug the incoming cable into the ANT. jack on the rear of the unit.

If your cable service supplies you with a converter box or if you use a satellite system, connect the box with

this unit as shown below.

T8200UA(EN).QX3 06.2.6 0:02 PM Page 6

When you watch a program recorded on another source (VCR or video camera), use the

AUDIO/VIDEO input jacks on the front of the unit.

Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks of

this unit.

Then use [SELECT] or [CH.

] until "AUX" appears on the screen.

OPEN / CLOSE

VIDEO HEADPHONE

AUDIO

ex.

VCR or video camera

, etc.

AUX

CONNECTING TO AN EXTERNAL DEVICE (FRONT)

21 3

INSTALLING THE BATTERIES IN REMOTE CONTROL

1) Open the battery compartment cover by pressing

the cover on the remote unit in the direction of

the arrow.

2) Insert 2 “AA” penlight batteries into the battery

compartment in the direction indicated by the

polarity (+/-) markings.

3) Replace the cover.

[BATTERY PRECAUTIONS]

•

Be sure to follow the correct polarity as indicat-

ed in the battery compartment. Reversed batter-

ies may cause damage to the device.

•

Do not mix different types of batteries together

(e.g. Alkaline and Carbon-Zinc) or old batteries

with fresh ones.

•

If the device is not to be used for a long period

of time, remove the batteries to prevent damage

or injury from possible battery leakage.

•

Do not try to recharge batteries not intended to

be recharged; they can overheat and rupture.

PREPARATION FOR USE

[Front of the unit]

To the Audio output jack

To the Video output jack

(OUT)

(IN)

(OUT)

(IN)

Audio Cable

(commercially available)

Video Cable

(commercially available)

T8200UA(EN).QX3 06.2.6 0:02 PM Page 7

[FRONT PANEL]

POWER Button

[TV P.9 / DVD P.15]

Disc loading tray

VOLUME

Buttons

[P.9]

CHANNEL SELECT

Button

[TV P.9]

STOP C Button

[DVD P.15]

PLAY B Button

[TV P.9 / DVD P.15]

Remote sensor window

OPEN/CLOSE A Button

[DVD P.15]

VIDEO input Jack

[P.7]

AUDIO input Jack

[P.7]

HEADPHONE Jack

[REMOTE CONTROL]

POWER Button

[TV P.9 / DVD P.15]

PICTURE/SLEEP Button

[TV P.10]

Number Buttons

[TV P.9 / DVD P.18]

DISPLAY Button

[DVD P.20]

SKIP H / G Buttons

[DVD P.18]

PLAY B Button

[TV P.9 / DVD P.15]

PAUSE F Button

[DVD P.15]

TITLE Button

[DVD P.15]

CLEAR Button

[TV P.10 / DVD P.18]

MODE Button

[DVD P.16]

OPEN/CLOSE A Button

[DVD P.15]

SELECT Button

[TV P.9]

CH.

Buttons

[TV P.9]

VOL.

Buttons

[TV P.9]

MUTE Button

[TV P.9]

SET-UP Button

[TV P.10 / DVD P.21]

REV E Button

[DVD P.15]

FWD D Button

[DVD P.15]

STOP C Button

[DVD P.15]

DISC MENU Button

[DVD P.15]

ENTER Button

[TV P.10 / DVD P.15]

/{ / B Buttons

[TV P.10 / DVD P.15]

RETURN Button

[DVD P.17]

NOTE:

• We do not recommend the use of universal remote con-

trols as it does not control all the functions. Note that

the code number given by universal remote controls

may not program to this unit. For more details, contact

the manufacturer of the universal remote control.

• Unless stated, all operations described are based on

remote control use. Some operations can be carried

out using the menu bar on the TV screen.

PERATING CONTROLS AND FUNCTIONS

- FRONT PANEL -

12 456 10798311

POWER

PICTURE/

SLEEP

SELECT

OPEN/

DISPLAY

+100

VOL.

SET-UP MUTE

SKIP

CH.

SLOW

PAUSE TITLE

CLEAR

MODE

ENTER

DISC MENU

RETURN

REV

PLAY

STOP

FWD

7 8 9

+10

- REMOTE CONTROL -

T8200UA(EN).QX3 06.2.6 0:02 PM Page 8

VOLUME 20

C C C C C C C C C C C C C C C C

AUX

1 Press [POWER] to turn on the unit.

NOTES:

If the TV screen shows snow

noise and there is no operation

for more than 10 seconds,

“HELPFUL HINTS” appears.

• Make sure if the antenna or cable is connected

properly. (Refer to “ANTENNA/CABLE CONNEC-

TIONS on page 6.)

• Set the“AUTO CH PROGRAMMING” in the

CHANNEL SET UP. (Refer to “CHANNEL SET UP”

on page 11.)

• If those setting do not work properly, please

call our help line on the front page of this owner’s

manual.

2 Use [CH.

] or the Number buttons to

select your desired channel number.

3 Use [VOL.

] to adjust the volume.

Press

[MUTE] to instantly

mute the sound. Press it again

to restore the previous sound

level.

NOTE:

•Even if you turn off the unit in the DVD mode, the unit

will be in the TV mode when you turn it on again.

TO WATCH CABLE OR SATELLITE CHANNEL

If the unit is connected to a cable box or satellite

box, use

[CH. K / L] to select CH3 or CH4 accord-

ing to the output channel setting of the device and

select desired channel on that device.

TO WATCH EXTERNAL INPUT

When an external equipment is

connected to the front AUDIO/

VIDEO input jacks, press

[SELECT] or [CH. K / L] repeat-

edly until "AUX" appears on the

screen.

- HELPFUL HINTS -

1.PLEASE CHECK TO SEE IF

THE ANTENNA/CABLE/

SATELLITE IS

PROPERLY CONNECTED.

2.DID YOU PERFORM

“AUTO CH PROGRAMMING”?

3.PLEASE REFER TO FRONT

PAGE OF THE OWNER’S

MANUAL OR REAR PANEL

FOR SUPPORT LINE

INFORMATION.

INITIAL SET UP

When you turn on the power for the first time,

the INITIAL LANGUAGE screen is displayed.

Select the language for screen display and perform

auto programming of the channels.

1 After antenna or cable connection is

completed, connect the power cord into

a standard AC outlet.

2 Press [POWER] to turn on the unit.

3 Press one of the keys listed

below to select the language

of on-screen menu.

• ENGLISH:

[VOL.

]

• ESPAÑOL: [VOL.

]

• FRANÇAIS: [CH.

]

4 Confirm the antenna (or cable)

connection and press

[PLAY

• The tuner scans and

memorizes all active

channels in your area.

5 When the scanning is completed,

the tuner stops on the lowest

memorized channel.

NOTES:

•You can exit the INITIAL SETUP menu by pressing

[SET-UP]. If the button is pressed during channel

scanning, the tuner stops scanning and the lowest

memorized channel is displayed.

•

The INITIAL SETUP menu is displayed every time

you turn on the unit unless the scanning is com-

pleted.

• In case no channel can be

received by the channel scanning,

"NO TV SIGNALS" is displayed on

the screen. Turn off the unit and

check the antenna connection,

then follow steps 1 to 5 again.

•

You can change the setting after completing INI-

TIAL SETUP by LANGUAGE menu or CHANNEL

SET UP menu. (Refer to "ON-SCREEN MENU LAN-

GUAGE" or "CHANNEL SET UP" on page 11).

CH 15

V OPERATION AND SETTINGS

TV SECTION

WATCHING A TV PROGRAM

TV OPERATION AND SETTINGS

TV SECTION

To use the number buttons

•Single digit channels: (Ex. 02, 03, 04 and so on)

Press [0] first to select a single digit channel.

•Two digit channels: (Ex. 12, 38, 95 ...)

Press two digits directly.

•Tree digit channels: (Ex. 115, 125 ...)

Press

[+100] first, then press the last two digits.

SELECT LANGUAGE

ENGLISH

NEXT:PRESS VOL

ESPAÑOL

DESPUÉS:PRESIONE VOL

FRANÇAIS

APRÈS:PRESSEZ CH.

– INITIAL SETUP –

PLEASE CONNECT ANTENNA

OR CABLE OR SATELLITE

TO THIS UNIT.

THEN PRESS PLAY,

IN ORDER TO PERFORM

“AUTO CH PROGRAMMING”

NO TV SIGNALS

(Example)

T8200UA(EN).QX3 06.2.6 0:02 PM Page 9

SLEEP 0 MINUTE

C C C C C C C C C C C C

BRIGHT

–

PP PP PP PP PP PP PP CC PP PP PP PP PP PP PP

SLEEP TIMER SETTING

The Sleep Timer function is used to turn off the

unit without pressing

[POWER] after a desired time.

1 Press [PICTURE / SLEEP] to

display the Sleep Timer menu.

2 Within 10 seconds, set your desired sleep time

using

[s / B].

• [B]...Increase by 10 min. (Up to 120 min.)

•

[s]...Decrease by 10 min.

NOTE:

•To cancel the Sleep Timer, use [CLEAR] or [s / B]

to set the time to "0".

3 To confirm the remainder time to shutdown,

press

[PICTURE / SLEEP].

PICTURE CONTROL

The picture controls are preset to factory defaults,

but you can change them to your desired setting.

1 Press [PICTURE / SLEEP]

repeatedly until desired control

is displayed.

2 Use [s / B] to adjust to your desired level within

5 seconds.

• Even if any power failure occurs, the unit will

retain its memory for this feature.

COLOR

TINT

SHARPNESS

BRIGHT

CONTRAST

to pale

to purple

to soft

to decrease brightness

to decrease contrast

to brilliant

to green

to clear

to increase brightness

to increase contrast

- TV SETUP -

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

B CAPTION [CAPTION1]

- TV SETUP -

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

B CAPTION [OFF]

CLOSED CAPTION SYSTEM

You can view specially labeled (cc) TV pro-

grams, movies, news and pre-recorded tapes with

either a dialogue caption or text display.

1 Press [SET-UP].

Use

[

] to point to

"CAPTION".

2 Press [ENTER] repeatedly to

select your desired caption

mode.

•

CAPTION mode: You can watch dramas, movies and

news while captioning the dialogues and the contents

of news.

• TEXT mode: You can watch half screen text informa-

tion if you want.

*"CAPTION2" is usually used for a second language (if

available).

Press [SET-UP] to exit the menu.

NOTES:

•Even if any power failure, the unit will retain its mem-

ory for this feature.

• Some programs are not broadcasted with closed

captions. The unit is designed to provide error-free

closed captions with high quality antenna, cable and

VCR signals. Conversely, poor quality signals are

likely to result in caption errors or no captions at all.

• Common signal conditions which may cause caption

errors are listed below:

- Weak snowy reception on TV screen

- Multiplex signal reception displaying picture

ghosts or airplane flutter

• If the unit displays a black box on

the TV screen, this means that

the unit is set to the TEXT mode.

To clear screen, select "CAP-

TION1", "CAPTION2" or "OFF".

TO CANCEL THE CLOSED CAPTION SYSTEM

1 Press [SET-UP]. Use [

] to point to

"CAPTION".

2 Press [ENTER] repeatedly to select "OFF".

3 Press [SET-UP] to exit the menu.

TV SECTION

TV OPERATION AND SETTINGS

SLEEP TIMER / PICTURE CONTROL

You can set Sleep Timer and picture

adjustment with

[PICTURE / SLEEP].

• The menu changes as described below every time

you press

[PICTURE / SLEEP].

Sleep Timer

BRIGHT

CONTRAST

COLOR

TINTSHARPNESS

T8200UA(EN).QX3 06.2.6 0:02 PM Page 10

- TV SETUP -

B CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

– CHANNEL SET UP –

B ADD/DELETE CH (CATV)

AUTO CH PROGRAMMING

ADD / DELETE

(Example: CH8)

CH15

NO TV SIGNALS

- TV SETUP -

B CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

– CHANNEL SET UP –

ADD/DELETE CH (CATV)

B AUTO CH PROGRAMMING

(Example)

TV OPERATION AND SETTINGS

TV SECTION

- TV SETUP -

CHANNEL SET UP

V-CHIP SET UP

B LANGUAGE [ENGLISH]

CAPTION [OFF]

ON-SCREEN MENU LANGUAGE

You can select the language of on-screen

menu among English, Spanish and French.

1 Press [SET-UP].

Use

[

] to point to

"LANGUAGE".

2 Press [ENTER] repeatedly to select "ENGLISH",

"ESPAÑOL" or "FRANÇAIS".

3 Press [SET-UP] to exit the menu.

NOTES:

• This function effects only the language on the screen

menu and not the audio source.

• If for some reason the menu is already in Spanish or

French, press [SET-UP], using [

] point to

"IDIOMA [ESPAÑOL]" or "LANGAGE [FRANÇAIS]",

then press [ENTER] repeatedly to select desired lan-

guage, then press [SET-UP].

• Refer to page 9 on how to use

the Number buttons.

4 Press [ENTER] repeatedly. The channel number

changes to

red (deleted) or blue (added) every

time you press the button.

•To delete or add another channel, repeat steps

to 4.

5 Press [SET-UP] to exit the menu.

NOTE:

•To confirm that channel(s) has (have) been deleted

or added, select it (them) using [CH.

CHANNEL SET UP

Channel presetting is necessary at the start

or in case you moved the TV to a different area.

AUTO CHANNEL PROGRAMMING

1 Press [SET-UP].

Use

[

] to point to

"CHANNEL SET UP", then

press

[ENTER].

2 Use [

] to point to "AUTO

CH PROGRAMMING", then

press

[ENTER].

The tuner scans and memorizes all the active

channels in your area.

3 When the scanning is comple-

ted, the lowest memorized

channel is displayed.

If "NO TV SIGNALS" appears

on the TV screen, check the

antenna connection and try

again.

NOTES:

• The unit may recognize CATV channels to be TV

channels if reception condition is poor. In this case,

check the antenna connection and try "AUTO CH

PROGRAMMING" again.

•

Auto channel programming is NOT necessary

when connected to a cable box or satellite box.

Just select the channel for cable box or satellite

input (ex. CH3 or CH4) on the unit, then select

your desired channel on the cable box or satellite

box.

ADDING/DELETING CHANNELS

You can add channels that was not memorized due

to the bad reception status and also delete chan-

nels you no longer receive or seldom watch.

1 Press [SET-UP].

Use

[

] to point to

"CHANNEL SET UP", then

press

[ENTER].

2 Use [

] to point to

"ADD/DELETE CH", then

press

[ENTER].

3 Use the Number buttons or

[CH.

] to select your

desired channel number.

(You can also use

[

] to

enter it.)

T8200UA(EN).QX3 06.2.6 0:02 PM Page 11

– V-CHIP SET UP –

B TV RATING

MPAA RATING

CHANGE CODE

- TV SETUP -

CHANNEL SET UP

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ACCESS CODE

_ _ _ _

V-CHIP SET UP

This feature enables parents to prevent their

children from watching inappropriate material on

TV. When you try to access a blocked program,

“PROTECTED PROGRAM by ...” message appears

on the TV screen.

NOTE:

•To change the rating, the TV

must be turned to an unprotect-

ed program. If the screen on the

right is displayed, change the

channel to a station that is not

protected.

1 Press [SET-UP].

Use

[

] to select

"V-CHIP SET UP", then press

[ENTER].

2 Use the Number buttons to

enter the access code.

•For the first time set-up or in

the event the unit has lost

power, enter the default code of 0000.

3 Use [

] to select an item,

then press

[ENTER].

Refer to the pages below to

set up each item.

• TV RATING : P12

• MPAA RATING : P13

• CHANGE CODE: P13

TV–PG [BLOCK]

B D [BLOCK]

L [BLOCK]

S [BLOCK]

V [BLOCK]

TV–Y [VIEW]

TV–Y7 ( ) [VIEW]

TV–G [VIEW]

B TV–PG (DLSV) [BLOCK]

TV–14 (DLSV) [BLOCK]

TV–MA ( LSV ) [BLOCK]

TV–Y [VIEW]

B TV–Y7 ( ) [VIEW]

TV–G [VIEW]

TV–PG ( ) [VIEW]

TV–14 ( ) [VIEW]

TV–MA ( ) [VIEW]

TV RATING SET UP

4 Use [

] to select a rating

that you wish to block.

Press [ENTER] repeatedly to

set it to "BLOCK" or "VIEW".

NOTES:

• When you select a rating and set

it to "BLOCK", the higher ratings

will be blocked automatically.

The lower ratings will be avail-

able for viewing.

• When you set the lowest rating to

"VIEW", all other ratings will be automatically avail-

able for viewing.

5 The TV-Y7, TV-PG, TV-14 and

TV-MA ratings have the option

of sub rating categories.

Use

[

] to select a rating

with sub-ratings, then press

[ENTER] twice.

6 Use [

] to select a sub-

rating, then press

[ENTER] to

set it to "BLOCK" or "VIEW".

NOTE:

•The blocked sub-ratings will

appear next to the rating cate-

gory in the "TV RATING" menu.

7 Press [SET-UP] to exit the menu.

Selection Rating Category Explanations

TV-Y7

FV Fantasy Violence

TV-PG, TV-14, TV-MA

Suggestive Dialog (TV-PG, TV-14 only)

L Coarse Language

S Sexual Situation

V Violence

Selection Rating Category Explanations

TV-Y Appropriate for all children

TV-Y7

Appropriate for children seven and older

TV-G General Audience

TV-PG Parental Guidance suggested

TV-14 Unsuitable for children under 14

TV-MA Mature audience only

B TV–Y [VIEW]

TV–Y7 ( ) [VIEW]

TV–G [VIEW]

TV–PG ( ) [VIEW]

TV–14 ( ) [VIEW]

TV–MA ( ) [VIEW]

PROTECTED PROGRAM

by TV-Y

TV SECTION

TV OPERATION AND SETTINGS

TV–Y [VIEW]

TV–Y7 ( ) [VIEW]

B TV–G [BLOCK]

TV–PG (DLSV) [BLOCK]

TV–14 (DLSV) [BLOCK]

TV–MA ( LSV ) [BLOCK]

T8200UA(EN).QX3 06.2.6 0:02 PM Page 12

G [VIEW]

PG [VIEW]

PG–13 [VIEW]

B R [BLOCK]

NC–17 [BLOCK]

X [BLOCK]

CHANGE ACCESS CODE

4 Use the Number buttons to

enter your desired access

code in the "NEW CODE",

then enter the same code in

the "CONFIRM CODE". When

completed, the menu will

return to "V-CHIP SET UP".

5 Press [SET-UP] to exit the menu.

NOTE:

•Your personal access code will be erased and will

return to the default (0000) when a power failure

occurs or when you turn off the power using a wall

switch. If you forget the code, unplug the power cord

for 10 seconds to restore the access code to 0000.

NEW CODE

X X X X

CONFIRM CODE

_ _ _ _

MPAA RATING SET UP

4 Use [

] to point to your

desired item, then press

[ENTER] to select "BLOCK"

or "VIEW".

5 Press [SET-UP] to exit the menu.

Selection Rating Category Explanations

G General Audience

PG Parental Guidance suggested.

PG-13 Unsuitable for children under 13

R Restricted; under 17 requires acco-

mpanying parent or adult guardian

NC-17 No one under 17 admitted

X Mature audience only

TV OPERATION AND SETTINGS

TV SECTION

T8200UA(EN).QX3 06.2.6 0:02 PM Page 13

BOUT THE DISCS

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot

be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.

*3: Discs recorded in the VR (Video Recording) format cannot be played back.

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs.

*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may

not play them back. Even if they are played back, the sound or video quality will be compromised.

*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD

recorder. However, depending on the recording status of a disc, the disc may not be played back at all

or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc

with the DVD recorder. Refer to the manual accompanying the DVD recorder.

*8: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not

be played back at all or normally (the picture or sound may not be smooth, etc.).

*9: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may

not play back properly.

*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read

it correctly.

*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region

format can only be played back on unit with the same region code.

DVD-Video

*1,2,4,6,10,11

* 4,6,10

* 4,5,6,9,10

*1,3,4,5,6,

7,9,10

DVD-RW

DVD-R

*1,3,4,5,6,8,9,10

DVD+RW

DVD+R

Audio CD

CD-RW

CD-R

Digital

video

(MPEG2)

Digital

audio

Region

code

Mark (logo)

Playable

discs

Recorded

signals

Disc

size

Disc types

12 cm

8 cm

12 cm

8 cm

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1

Chapter 2

Chapter 3 Chapter 4

Example

Tr ack 1

Tr ack 2

Tr ack 5

Tr ack 6

Tr ack 3

Tr ack 4

• NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /

DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3

•

The sound MAY NOT be heard: Super Audio CD

NOTE:

Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio

CD layer cannot be delivered.

• Any other discs without compatibility indications

is a trademark of DVD Format/Logo Licensing Corporation.

PLAYABLE DISCS

UNPLAYABLE DISCS

DVD SECTION

T8200UA(EN).QX3 06.2.6 0:02 PM Page 14

ABOUT THE DISCS / PLAYING A DISC

DVD SECTION

LAYING A DISC

1 Press [POWER] to turn on the

unit.

2 Press [OPEN/CLOSE

3 Place the disc in the tray, with

the label facing up.

4 Press [PLAY

• The tray will close automatically and playback will

start. When you play back a DVD which features a

title menu, it may appear on the screen.

NOTES:

• Closing the disc tray manually or by pressing

[OPEN/CLOSE

] also starts playback.

• With DVDs that use titles for playback program signals,

playback may start from the second title or it may skip

these titles.

5 To freeze the picture, press [PAUSE

] during

playback.

NOTE:

• The sound will be muted in pause mode.

6 Press [STOP

] to stop

playback temporarily.

• Press [PLAY

] to resume

the playback.

• To cancel resume and stop the

disc,

[STOP

] again.

NOTES:

• The resume information stays on even if the unit is

turned off.

•A "prohibited icon" may appear

at the top-right on the TV screen

during operation. This means

that the operation is not available on the disc.

STEP BY STEP PLAYBACK

• During playback, press [PAUSE F].

You can advance the picture frame by

frame by pressing

[PAUSE F] repeatedly.

•To return to normal playback, press

[PLAY

BASIC PLAYBACK

DVD may contain menus to navigate the

disc and access special features.

1 Press [DISC MENU] or [TITLE].

• The DVD main menu / the title menu will appear.

• You can call up the menu even during playback.

2 Use [

] to select an item, and press

[ENTER].

NOTES:

• If disc menu is available on the disc, audio language,

subtitle options, chapters for the title and other

options will appear for selection.

• Contents of menu and corresponding menu opera-

tions may vary between discs. Refer to the manual

accompanying the disc for details.

DISC MENU / TITLE MENU

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

Resume ON

FAST FORWARD / FAST REVERSE

• During playback, press

[FWD

] for fast forward or

[REV

] for fast reverse.

•Every time you press the button,

playback speeds up and the level

of the speed appears on the

screen.

NOTES:

•For DVDs, fast forward/reverse speed is different

depending on the disc. Approximate speed is 1 (×2),

2 (×8), 3 (×20), 4 (×50) and 5 (×100).

•For Audio CDs approximate speed is 1 (

×2), 2 (×8)

and 3 (×30).

•To return to normal playback, press [PLAY

SLOW FORWARD / SLOW REVERSE

• During playback, press [PAUSE

• Press

[FWD

] for slow forward or

[REV

] for slow reverse.

•Every time you press the button,

playback is slowed down and the

level of the speed appears on the

screen.

NOTE:

• Slow forward / reverse speed varies with the disc.

Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).

•To return to normal playback, press [PLAY

T8200UA(EN).QX3 06.2.6 0:02 PM Page 15

Setting menu switches as below every time you press [MODE] during playback.

See the reference page for how to set each menu. Some functions are not available in specific

modes, but this is not a malfunction.

FUNCTION TABLE

(If available)

Press [MODE]

AUDIO MENU (P.17)

SEARCH MENU (P.18)

REPEAT MENU (P.19)

A-B REPEAT MENU (P.19)

MENU OFF

AUDIO STREAM 1

...

AUDIO STREAM 8

ANGLE 1

....

ANGLE 8

OFF

SUBTITLE STREAM 1

....

SUBTITLE STREAM 32

OFF

CHAPTER SEARCH

TITLE SEARCH

TIME SEARCH

MARKER SEARCH

OFF

CHAPTER

TITLE

OFF

A-

A-B

OFF

ZOOM 1 (×1.3)

ZOOM 2 (×2.0)

ZOOM 3 (×4.0)

STEREO

L-ch

R-ch

TRACK SEARCH

TIME SEARCH

MARKER SEARCH

OFF

TRACK

ALL

OFF

A-

A-B

DVD-V

Press [MODE]

AUDIO MENU (P.17)

SUBTITLE MENU (P.17)

ANGLE MENU (P.17)

ZOOM MENU (P.17)

BLACK LEVEL MENU (P.18)

SEARCH MENU (P.18)

REPEAT MENU (P.19)

A-B REPEAT MENU (P.19)

MENU OFF

PECIAL PLAYBACK FUNCTIONS & SETTINGS

DVD SECTION

T8200UA(EN).QX3 06.2.6 0:02 PM Page 16

The Zoom function allows you to enlarge

the video image and to pan through the

enlarged image.

1 During playback, press

[MODE] repeatedly until

ZOOM menu appears.

2 Press [ENTER] repeatedly to select the required

zoom factor.

OFF ZOOM1(×1.3) ZOOM2(×2.0) ZOOM3(×4.0)

3 Use [

] to move the zoomed picture

across the screen.

4 Press [RETURN] to exit.

• The zoomed position guide

appears on the right corner

of the TV screen in the zoom mode.

NOTES:

• Zooming function does not work while disc menu is shown.

• Zooming function is not available on some discs.

•It may take several seconds to slide the zoomed picture.

• The picture may be distorted if you operate other

functions (ex. pause, fast forward etc.) repeatedly in

the zoom mode.

•To cancel the zoom mode, repeat steps 1-2 and

press

[ENTER] until "OFF" appears.

OFF (ZOOM)

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

DVD SECTION

ZOOM

AUDIO LANGUAGE

You can select audio language during DVD playback

(if multi languages are available).

1 Press [MODE] during playback.

2 Use [

] to select your desired language.

NOTES:

• This function may not work on some DVDs with mul-

tiple audio languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Refer to

the manual of the disc.)

• When "NOT AVAILABLE" appears

on the TV screen, it means this

function is not available on the

disc.

3 Press [RETURN] to exit the menu.

STEREO SOUND MODE

You can select sound output mode during CD

playback.

1 Press [MODE] during

playback.

2 Use [

] to select the sound mode.

• STEREO: mixed sound of left and right channels

L-ch: left channel sound only

R-ch: right channel sound only

3 Press [RETURN] to exit the menu.

AUDIO MENU

1.ENG Dolby D 1/2 ch 48k/3

STEREO (AUDIO)

You can select a language for subtitles

during DVD playback (if available).

1 During playback, press

[MODE] repeatedly until

SUBTITLE menu appears.

2 Use [

] to select your desired subtitle lan-

guage. To cancel subtitles, select "OFF".

3 Press [RETURN] to exit the menu.

NOTES:

• This function may not work on some DVDs with mul-

tiple subtitle languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Refer to

the manual of the disc.)

• If the selected language does not have 3-letter code,

"---" will be displayed on the screen. (Refer to

LANGUAGE CODE LIST on page 27.)

SUBTITLE LANGUAGE

1.ENG/6

(SUBTITLE)

NOT AVAILABLE

(

AUDIO

)

Some DVD discs contain scenes which

have been shot from various angles and

you can change them as you like.

1 During playback, press

[MODE] repeatedly until

ANGLE menu appears.

2 Use [

] to select your desired angle.

3 Press [RETURN] to exit the menu.

NOTE:

• If multiple angle function is not available, this menu

does not appear on the screen.

1 / 8 (ANGLE)

ANGLE MENU

ZOOM2OFF (ZOOM) ZOOM1 ZOOM3

T8200UA(EN).QX3 06.2.6 0:02 PM Page 17

You can adjust the Black Level to make the

black parts of the picture brighter.

1 During playback, press

[MODE] repeatedly until

BLACK LEVEL menu

appears.

2 Use [

] to select "ON" or "OFF".

• ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

(Initial setting)

3 Press [RETURN] to exit the menu.

NOTE:

• The setting will be saved even if the unit is turned off.

OFF (BLACK LEVEL)

BLACK LEVEL MENU

DVD SECTION

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

You can begin playback at a specific track, title,

chapter or from a specific point on a disc.

TRACK SEARCH

1 During playback, press [MODE]

repeatedly until SEARCH

menu appears.

2 Within 60 seconds, use the Number buttons to

select the desired track number. Playback will

start from the selected track.

NOTES:

•For single digit press [0] first, if the total track of the

disc is 10 tracks or more.

•You can also skip tracks by using

[SKIP H / G],

or entering the desired track number with

the Number buttons.

3 Press [RETURN] to exit the menu.

CHAPTER SEARCH

1 During playback, press

[MODE] repeatedly until

SEARCH menu appears.

2 Use the Number buttons to enter the desired

chapter number. Playback will start at the selected

chapter.

• Press

[CLEAR] to erase the incorrect input.

• For single digit press

[0] first, if the total number of

chapters of the disc is 10 or more.

3 Press [RETURN] to exit the menu.

NOTE:

•You can also skip chapters by using [SKIP H / G],

or entering the desired chapter number with

the Number buttons.

TITLE SEARCH

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use [

] to display

TITLE SEARCH menu.

3 Use the Number buttons to enter the desired title

number. Playback will start at the selected title.

• Press [CLEAR] to erase the incorrect input.

• For single digit press

[0] first, if the total number of

titles of the disc is 10 or more.

4 Press [RETURN] to exit the menu.

SEARCH MENU

_/2 (SEARCH)

__/12 (SEARCH)

_ _/21 (SEARCH)

T8200UA(EN).QX3 06.2.6 0:02 PM Page 18

TIME SEARCH

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use [

] repeatedly to

display TIME SEARCH menu.

3 Within 60 seconds, use the Number buttons to

enter a desired disc time. Playback will start at

the specified time.

• Press

[CLEAR] to erase the incorrect input.

• When there is no need to enter a number, "0"

appears automatically.

4 Press [RETURN] to exit.

MARKER SEARCH

You can set markers to memorize your favorite

places on a disc.

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use [

] repeatedly to

display MARKER SEARCH

menu.

3 Use [

] to select a marker number among

1 to 10.

4 When the track (or title) reaches your desired

point, press

[ENTER] to set a marker.

• The track (or title) number and

elapsed playing time will appear

on the TV screen.

5 You can play from the desired point by selecting

the marker number by using

[

] and then

pressing

[ENTER].

6 To clear a marker, select the marker number and

press

[CLEAR].To clear all markers at once,

select "AC" with

[

] and press [ENTER].

NOTE:

• The following operation will also erase all markers:

– Opening the disc tray

– Turning off the power

– Pressing

[SELECT]

7 Press [RETURN] to exit the menu.

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

DVD SECTION

0:0 _:_ _ 0:04:23

TOTAL

REPEAT PLAYBACK

REPEAT TRACK

1 During playback, press

[MODE] repeatedly until

REPEAT menu appears.

2 Use [

] to select your desired repeat mode.

• OFF: Repeat function off

TRACK: Current track repeat

ALL: All track repeat

NOTE:

• Repeat Track setting will be cleared when moving to

other track.

3 Press [RETURN] to exit the menu.

REPEAT TITLE / CHAPTER

1 During playback, press

[MODE] repeatedly until

REPEAT menu appears.

2 Use [

] to select your desired repeat mode.

• OFF: Repeat function off

CHAPTER: Current chapter repeat

TITLE: Current title repeat

NOTE:

• Repeat Title/Chapter is not available in some scenes.

• The REPEAT setting will be cleared when moving to

other title or chapter.

3 Press [RETURN] to exit the menu.

REPEAT A-B

1 Press [MODE] repeatedly until

A-B REPEAT menu appears.

2 Press [ENTER] at your desired

starting point (A).

To cancel it, press

[CLEAR].

3 Press [ENTER] again at your

desired ending point (B).

The repeat sequence begins.

4 To exit the sequence, follow step 1 and press

[ENTER] repeatedly until "OFF" appears and

press

[RETURN] to exit the menu.

NOTES:

• The A-B repeat section can be set only within the cur-

rent title (for DVDs) or current track (for Audio CDs).

• A-B repeat is not available with some scenes in DVD.

• A-B repeat playback is not available during other

repeat playback.

_ _ _ _:_ _:_ _

1 23456789

1 00:15:30

23456789

OFF (REPEAT)

A-B (A-B REPEAT)

A- (A-B REPEAT)

OFF (REPEAT)

OFF (A-B REPEAT)

<Example: CD>

T8200UA(EN).QX3 06.2.6 0:02 PM Page 19

For DVD-Videos

1 Press [DISPLAY] during playback to show cur-

rent Chapter.

• The elapsed and remaining

playing time of the current

chapter will be displayed.

2 Press [DISPLAY] again to show current Title.

• The elapsed and remaining

playing time of the current title

will be displayed.

3 Press [DISPLAY] again.

• The bit rate and the current

repeat setting will be displayed.

• If you are playing a dual layered disc, the layer

number will also be displayed

(L0: Layer 0 is playing. L1: Layer 1 is playing).

4 Press [DISPLAY] again to exit.

You can determine the playing order of tracks.

1 In the stop mode, press [MODE].

• The PROGRAM screen appears.

2 Use [

] to select a track,

then press

[ENTER].

NOTES:

• Up to 99 tracks can be entered.

• Press

[CLEAR] to erase the

most recently entered track.

• If you enter more than 8 tracks, you can change

pages of the program list with

[SKIP H / G].

•To erase all tracks in the program at once, select "ALL

CLEAR" at the bottom of the track list.

3 Repeat step 2 until you select all the tracks you

want to play in the program.

4 Press [PLAY

] to play the programmed tracks.

This function shuffles the playing order of

tracks.

1 In the stop mode, press

[MODE] twice.

• The RANDOM screen appears.

2 Press [PLAY

] to start random playback.

NOTE:

• REPEAT setting is available during random playback.

(Refer to "REPEAT TRACK" on page 19.)

3 Press [STOP

] to stop random playback.

PLAY

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

- - no indication - -

RANDOM

PROGRAMMED PLAYBACK

RANDOM PLAYBACK

You can check the information about the current disc by pressing [DISPLAY].

9/49 0:00:00 -0:03:30

1/3 0:00:00 - 1:23:45

TL1

For Audio CDs

1 Press [DISPLAY] during playback to show the

current Track.

• The elapsed and remaining

playing time of the current

track will be displayed.

2 Press [DISPLAY] again to show current Total

Tra ck.

• The elapsed and remaining

playing time of the total track

will be displayed.

3 Press [DISPLAY] again to exit.

4/12 0:03:21 - 0:02:15

4/12 0:13:45 - 0:45:40

PROGRAM B

When in the PROGRAM

or RANDOM mode.

PROGRAM

TOTAL 0:14:25

1/1

1/4

6 1:30

CD-DA

ENTER

CLEAR

PLAY

2 4:30

1 3:40 1 3:40

3 5:00

4 3:10

5 5:10

6 1:30

3 5:00

10 1:30

12 2:45

6 1:30

7 2:30

PROGRAM

TOTAL 0:00:00

1/1

1/4

1 3:40

CD-DA

ENTER

CLEAR

PLAY

2 4:30

1 3:40

3 5:00

4 3:10

5 5:10

6 1:30

7 2:30

DVD SECTION

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

5 Press [STOP

] to temporarily stop the playback.

You can resume the playback by pressing

[PLAY

Press

[STOP

] twice to cancel the pro-

grammed playback.

NOTE:

• REPEAT setting is available during programmed

playback. (Refer to "REPEAT TRACK" on page 19.)

N-SCREEN INFORMATION

T8200UA(EN).QX3 06.2.6 0:02 PM Page 20

HANGING THE DVD SET UP ITEMS

ON-SCREEN INFORMATION / CHANGING THE DVD SET UP ITEMS

DVD SECTION

1 In the stop mode, press

[SET-UP] twice to display the

DVD SETUP menu.

NOTES:

• Pressing [SET-UP] once will

show TV SETUP menu partly.

• If the menu does not appear, press [STOP

] first.

Make sure the unit is in DVD mode before setting.

2 Use [

] to select "CUSTOM", then press

[ENTER].

3 Use [

] to select the

desired item, then press

[ENTER].

Refer to the pages below for

continuation to set up each item.

• LANGUAGE setting: P21

• DISPLAY setting: P22

• AUDIO setting: P22

• PARENTAL setting: P22

• OTHERS setting: P23

SETUP CUSTOM

LANGUAGE

DISPLAY

AUDIO

PARENTAL

OTHERS

CUSTOM MENU

You can change the DVD player’s settings by pressing [SET-UP] in DVD mode.

The set up items are shown in the diagram below.

AUDIO

SUBTITLE

DISC MENU

DRC

TV MODE

STILL MODE

TV MODE

ANGLE ICON

AUTO POWER OFF

PARENTAL LEVEL

PASSWORD CHANGE

LANGUAGE (P.21)

DISPLAY (P.22)

AUDIO (P.22)

PARENTAL (P.22)

OTHERS (P.23)

CUSTOMQUICK INITIALIZE

Press [SET-UP] twice

LANGUAGE SETTING

4 Use [

] to select the

desired item, then press

[ENTER].

• AUDIO: Sets the audio language.

• SUBTITLE: Sets the subtitle language.

• DISC MENU: Sets the language for DVD menu.

5 Use [

] to select your desired language

from the list, then press

[ENTER].

6 Press [SET-UP] to exit the menu.

NOTES:

• If your desired language is not

on the list, select "OTHER" and

enter the code of the language.

(Refer to "LANGUAGE CODE

LIST" on page 27.)

• This feature may not be valid due to default setting

of the disc. In this case, press

[MODE] to select the

language. (Refer to "AUDIO MENU" on page 17.)

• If you select a language that is not supported by the

disc, subtitle will be "OFF" automatically and the

default language of the disc will be selected.

•To change the language for the on-screen menus,

call up the TV SETUP menu by pressing

[SET-UP] once and set the language. (Refer to "ON-

SCREEN MENU LANGUAGE" on page 11.)

SETUP

QUICK

CUSTOM

INITIALIZE

SELECT:

L SET:ENTER

EXIT:SETUP CANCEL:RETURN

AUDIO ORIGINAL

SUBTITLE

OFF

DISC MENU

ENGLISH

SETUP LANGUAGE

LANGUAGE CODE

Please enter a 4-digit language code.

T8200UA(EN).QX3 06.2.6 0:02 PM Page 21

DISPLAY SETTING

4 Use [

] to select an item,

then press

[ENTER].

• TV MODE:

You can change certain aspects of the DVD display

screens and on-screen messages on the TV screen.

• 4:3 LETTER BOX (default):

To show black bars on top and

bottom of the screen.

• 4:3 PAN & SCAN:

To show a full height picture with both sides

trimmed.

NOTE:

•You can access this setting directly by selecting

"QUICK" at step 2 on page 21.

• STILL MODE:

This function allows you to adjust picture resolution

and quality in the still mode.

•AUTO (default):

Automatically select the best

resolution setting (FRAME or FIELD) based on

the data characteristics of the pictures.

• FIELD:

Select "FIELD" when the pictures are still unstable

even if "AUTO" is selected. FIELD stabilizes the

pictures, although the picture quality may become

coarse due to the limited amount of data.

• FRAME:

Select "FRAME" to display relatively motionless

pictures in higher resolution. FRAME improves

the picture quality, although it may unstabilize the

pictures due to simultaneous output of two field

data.

5 Press [SET-UP] to exit the menu.

QUICK

TV MODE

4:3 LETTER BOX

STILL MODE AUTO

SETUP DISPLAY

AUDIO SETTING

Choose the appropriate Audio settings for your

equipment as it only affects during the playback of

DVD discs.

4 Press [ENTER] repeatedly

until your desired setting

appears.

• DRC (Dynamic Range Control):

• ON :To compress the range of soft to loud sound.

(default)

• OFF : Output the original sound.

5 Press [SET-UP] to exit the menu.

DRC

SETUP AUDIO

DVD SECTION

PARENTAL SETTING

This feature allows you to set the rating level of your

DVD discs. Playback will stop if the disc ratings

exceed the level you set.

PARENTAL LEVEL

4 Enter four-digit password with

the Number buttons, then

press

[ENTER].

NOTE:

• Enter any 4 digits (except for 4737) to set the pass-

word for the first time, and record it for your memory.

5 Use [

] to select

"PARENTAL LEVEL", then

press

[ENTER].

6 Use [

] to select the

desired level, then press

[ENTER].

7 Press [SET-UP] to exit the menu.

CONTROL LEVELS

• ALL: All parental locks are cancelled.

•

8 [ADULT]: DVD software of any grade (adult/gen-

eral/children) can be played back.

• 7 to 2: Only DVD software intended for general

use and children can be played back.

•

1 [KID SAFE]: Only DVD software intended for

children can be played back, with those intended

for adult and general use prohibited.

NOTE:

• With some DVDs, it may be difficult to find if they are

compatible with parental lock. Be sure to check if the

parental lock function operates in the way that you

have set.

SETUP PARENTAL

PASSWORD

Please enter a 4-digit password.

PARENTAL LEVEL ALL

PASSWORD CHANGE

SETUP PARENTAL

PARENTAL LEVEL

ALL

8 [ADULT]

7 [NC-17]

6 [R]

SETUP PARENTAL

CHANGING THE DVD SET UP ITEMS

4:3 LETTER BOX

4:3 PAN & SCAN

SETUP DISPLAY

TV MODE

AUTO

FIELD

FRAME

SETUP DISPLAY

STILL MODE

T8200UA(EN).QX3 06.2.6 0:02 PM Page 22

OTHER SETTING

4 Use [

] to select an item,

then press

[ENTER] repeated-

ly to set the feature "ON" or

"OFF".

• ANGLE ICON:

• ON: To show the angle icon when multiple

camera angles are available during DVD

playback. (default)

• OFF: To keep angle icon from the display.

• AUTO POWER OFF:

• ON: To activate screen saver program and turn

off the unit automatically. (default)

• OFF: To deactivate Auto Power Off function.

NOTE:

• The screen saver program starts when there is no

input from the unit for 5 minutes in the stop mode.

After the screen saver program is activated for 15

minutes, the power is automatically turned off.

5 Press [SET-UP] to exit the menu.

PASSWORD CHANGE

4 Enter current password with

the Number buttons, then

press

[ENTER].

5 Use [

] to select

"PASSWORD CHANGE", then

press

[ENTER].

6 Enter four-digit password with

the Number buttons, then

press

[ENTER].

7 Press [SET-UP] to exit the menu.

NOTE:

• If you forget the current password, enter 4737 first,

then enter your new password.

The former password will be cleared and parental

level will be set to "ALL" (default).

CHANGING THE DVD SET UP ITEMS

DVD SECTION

This allows you to return all items of

SETUP menu (except for

PARENTAL

setting

and menu language) to their default settings.

1 In the stop mode, press [SET-UP] twice to

display the DVD SETUP menu.

2 Use [

] to select

"INITIALIZE", then press

[ENTER].

3 Use [

] to select "YES",

then press

[ENTER] twice.

• To cancel the initialization,

select "NO".

4 Press [SET-UP] to exit the menu.

SETUP OTHERS

ANGLE ICON

AUTO POWER OFF

SETUP

QUICK

CUSTOM

INITIALIZE

SETUP INITIALIZE

Initialize?

YES

INITIALIZE

SETUP PARENTAL

PASSWORD

Enter current password.

PARENTAL LEVEL ALL

PASSWORD CHANGE

SETUP PARENTAL

PASSWORD

Please enter a 4-digit password.

Don't forget the password.

Press 'ENTER' to activate password.

2 3 4

T8200UA(EN).QX3 06.2.6 0:02 PM Page 23

ROUBLESHOOTING GUIDE

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following

guide for the possible remedy of a problem before contacting the Customer Service. Sometimes a performance

problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It could save

your time and money.

No power

No operation by remote control

Poor or no picture

Poor or no sound

Misspelling in captions

Text is not shown in its entirety

or a delay occurs from what is

being said

Captions scrambled with white

boxes

No captions in a program which

must contain closed caption

No captions in a pre-recorded

videotape with indicated closed

captions included

Black box in the TV screen

SYMPTOM POSSIBLE REMEDY

PAGE

•

Make sure the power plug is connected to an AC outlet.

•

(In case of power failure) Check the breaker.

•

Check if the batteries are weak or inserted incorrectly.

Replace weak batteries and insert with their polarities

(+/- signs) as indicated.

•

Aim the remote control at the remote sensor and operate

within 23 feet (7 m) of the unit.

•

Remove all obstacles to clear the path of the infrared signal.

•

Check the infrared signal output.

•

Select the correct mode to operate by pressing

[SELECT].

•

The operable range from the unit is 10 feet (3 m) within 15˚.

•

Check if antenna or cable is connected properly

•

Check for the broken pin or wire of antenna cable.

•

Check for source of reception disturbance.

•

Press

[SELECT] to select the correct mode.

•

Perform channel scanning to memorize available TV channels.

•

Tr y another channel. If OK, then possible station problem.

•

Adjust picture control (COLOR/CONTRAST/BRIGHT etc.).

•

Check for magnetism from nearby appliances and try

degaussing.

•

Adjust volume control using

[

VOL.

•

Tr y another channel. If OK, then possible station problem.

•

Error committed by the closed captioning production company.

•

Possible in a live broadcast. Not in case of a prerecorded pro-

gram.

•

A few seconds of delay is common for live broadcast.

If a dialogue exceeds the display capacity (220 words per

minute), selective editing is used so that the captions remain

up-to-date with the current TV screen dialogue.

•

Caused by interferences of building, power lines, thunder-

storms, etc.

•

The broadcast may use a time compression process to speed

up the program. The decoder cannot read the compressed

information and captions will be lost.

•

Possibility of a illegal copy or an erroneous copying process

accidentally performed by the fabricator.

•

You are in TEXT mode. Select CAPTION mode or "OFF".

TV mode

General

T8200UA(EN).QX3 06.2.6 0:02 PM Page 24

TROUBLESHOOTING GUIDE

NOTES:

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s

Manual for details on correct operations.

• Playback from a desired track and random playback are not available during playback.

No picture

Disc cannot be played

No sound

No DTS audio is output

Distorted picture

Audio or subtitle language does

not match the setting

The camera angle cannot be

changed

Audio or subtitle language can-

not be changed

"Prohibited icon" appears on the

screen

CD/DVD sound dropout

No CD/DVD reproduction

DVD picture poor

SYMPTOM POSSIBLE REMEDY

PAGE

•

This unit cannot play DVD-RAM/CD-i/Photo CD/Video

CD/DVD with region codes other than "1" and "ALL".

•

Clean the disc.

•

Place the disc correctly, with the label side up.

•

Cancel the parental setting or change the control level.

•

Correct the audio output settings.

•

This unit does not support DTS audio. This is not a malfunc-

tion.

•

During the playback of a 2-layered disc, pictures may stop for

a moment. This happens while the 1st layer is being switched

to the 2nd layer. This is not a malfunction.

•

This happens right after fast forwarding or rewinding.

•

The selected language is not available for audio or subtitle on

the DVD.

•

The DVD does not contain sequences recorded from different

camera angles.

•

The DVD does not contain audio source or subtitles in the

selected language.

•

That operation is not available by the unit or the disc.

•

Scratched disc. Replace with an unscratched one.

DVD mode

T8200UA(EN).QX3 06.2.6 0:02 PM Page 25

DISC HANDLING

• Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it

is not used.

•To clean-off, use a soft cloth.

• Do not use a hard cloth since this

will mar the disc.

• Wipe the disc in a straight line from center to edge.

•Never wipe with a circular motion.

• Do not use detergent or abrasive clean-

ing agents.

AINTENANCE

DEGAUSSING

A degaussing circuit in this unit clears up color

errors on the TV screen. Color errors occur when

there is any excess magnetism close to the unit.

This circuit is designed to operate once when the

unit is first plugged in.

If you see minor color

errors on the screen, unplug the unit for approx-

imately 30 minutes.

When you plug the unit again,

the degaussing circuit will operate to clear errors.

Take this step any time the TV screen is accidental-

ly magnetized or when you move the unit.

IF THE LASER OPTICAL PICKUP UNIT IS

DIRTY

• If the unit still does not perform properly when it is

operated, while referring to the relevant sections

and to “TROUBLESHOOTING GUIDE” in this

Owner’s Manual, the laser optical pickup unit may

be dirty. Consult your dealer or an Authorized

Service Center for inspection and cleaning of the

laser optical pickup unit.

CABINET CLEANING

• Wipe the front panel and other exterior surfaces of

the unit with a soft cloth immersed in lukewarm

water and wrung dry.

•Never use a solvent or alcohol. Do not spray

insecticide liquid near the unit. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

SERVICING

• Should your unit become inoperative, do not try to

correct the problem by yourself. There are no

user-serviceable parts inside. Turn off, unplug the

power cord and

please call our help line men-

tioned on the front page,

to locate an Authorized

Service Center.

IR SIGNAL CHECK

Use the AM radio or the digital camera to check if

the remote control properly sends out the infrared

signal. It will help to define the cause of malfunction.

Using AM radio

•Tune the AM radio to no broadcasting band.

Press any button on remote control toward

the radio. If the radio receives the signal

from remote control properly, the sound will

flutter.

Using digital camera

(including built-in camera of cellular

phone)

• Press and hold any button on remote control

toward a digital camera. The remote control is

working if you confirm infrared light through the

digital camera.

T8200UA(EN).QX3 06.2.6 0:02 PM Page 26

Language Code

Mongolian 5960

Nauru 6047

Nepali 6051

Norwegian [NOR] 6061

O-R

Occitan 6149

Oriya 6164

Oromo(Afan) 6159

Panjabi 6247

Pashto;Pushto 6265

Persian 5247

Polish [POL] 6258

Portuguese [POR] 6266

Quechua 6367

Rhaeto-Romance 6459

Romanian [RUM] 6461

Russian [RUS] 6467

Samoan 6559

Sangho 6553

Sanskrit 6547

Scots Gaelic 5350

Serbian 6564

Serbo-Croatian 6554

Sesotho 6566

Setswana 6660

Shona 6560

Sindhi 6550

Singhalese 6555

Siswat 6565

Slovak 6557

Slovenian 6558

Language Code

Somali 6561

Spanish [SPA] 5165

Sundanese 6567

Swahili 6569

Swedish [SWE] 6568

Tagalog 6658

Tajik 6653

Tamil 6647

Tatar 6666

Telugu 6651

Thai 6654

Tibetan 4861

Tigrinya 6655

Tonga 6661

Tsonga 6665

Tu rkish [TUR] 6664

Tu rkmen 6657

Tw i 6669

U-Z

Ukrainian 6757

Urdu 6764

Uzbek 6772

Vietnamese 6855

Volapuk 6861

Welsh 4971

Wolof 6961

Xhosa 7054

Yiddish 5655

Yo r uba 7161

Zulu 7267

MAINTENANCE / APPENDIX

If you choose a language that has a 3 letter language

code, the code will be displayed every time you change

the AUDIO or SUBTITLE language setting. If you

choose any other languages, '---' will be displayed

instead. (3 letter language code is written in bracket.)

Language Code

A-B

Abkhazian 4748

Afar 4747

Afrikaans 4752

Albanian 6563

Amharic 4759

Arabic 4764

Armenian 5471

Assamese 4765

Aymara 4771

Azerbaijani 4772

Bashkir 4847

Basque 5167

Bengali;Bangla 4860

Bhutani 5072

Bihari 4854

Bislama 4855

Breton 4864

Bulgarian 4853

Burmese 5971

Byelorussian 4851

C-E

Cambodian 5759

Catalan 4947

Chinese [CHI] 7254

Corsican 4961

Croatian 5464

Czech [CZE] 4965

Danish [DAN] 5047

Dutch [DUT] 6058

English [ENG] 5160

Esperanto 5161

Estonian 5166

F-H

Faroese 5261

Fiji 5256

Finnish [FIN] 5255

French [FRE] 5264

Frisian 5271

Galician 5358

Georgian 5747

Language Code

German [GER] 5051

Greek [GRE] 5158

Greenlandic 5758

Guarani 5360

Gujarati 5367

Hausa 5447

Hebrew 5569

Hindi 5455

Hungarian [HUN] 5467

I-K

Icelandic [ICE] 5565

Indonesian 5560

Interlingua 5547

Interlingue 5551

Inupiak 5557

Irish [IRI] 5347

Italian [ITA] 5566

Japanese [JPN] 5647

Javanese 5669

Kannada 5760

Kashmiri 5765

Kazakh 5757

Kinyarwanda 6469

Kirghiz 5771

Kirundi 6460

Korean [KOR] 5761

Kurdish 5767

L-N

Laothian 5861

Latin 5847

Latvian;Lettish 5868

Lingala 5860

Lithuanian 5866

Macedonian 5957

Malagasy 5953

Malay 5965

Malayalam 5958

Maltese 5966

Maori 5955

Marathi 5964

Moldavian 5961

PPENDIX

CABLE CHANNEL DESIGNATIONS

TV Display

CATV channel

TV Display

W+80 W+81 W+82 W+83 W+84

W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79

W+55 W+56 W+57 W+58 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64

W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54

W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39

W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24

A-5

RSTUVWW+1 W+2 W+3 W+4 W+5 W+6 W+7 W+8 W+9

CDE FGH I JK LMNOPQ

5A 2 3 4 5 6 7 8 9 10 11 12 13 A B

123456789101112131415

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

91 92 93 94 95 96 97 98 99 100 101 102 103 104 105

106 107 108 109 110 111 112 113 114 115 116 117 118 119 120

121 122 123 124 125

CATV channel

If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels

with letters or letter-number combinations. Please check with your local cable company. The following is a

chart of common cable channel designations.

LANGUAGE CODE LIST

T8200UA(EN).QX3 06.2.6 0:02 PM Page 27

GENERAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

CRT: 13 inch in-line gun,

90˚ deflection tube

Television system: NTSC-M

Closed caption system: §15.119/FCC

Tuner channel

TV VHF Low: #2~#6

TV VHF High: #7~#13

TV UHF: #14~#69

CATV

VHF: 5A

MID band: A5~A1, A~I

SUPER band: J~W

HYPER band: W+1~W+84

DVD

Product type: DVD Player

Discs:

DVD video, Audio CD

Output signal format: NTSC color

Sound output:

1 speaker, 1W, 8 ohm

OTHER SPECIFICATIONS

Ter minals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced

(F-type)

Video input: RCA connector

× 1

Audio input: RCA connector

× 1

Headphone: 1/8" (3.5 mm)

miniature jack

Remote control: Digital encoded

infrared light system

Operating temperature: 5°C to 40°C

(41°F~104°F)

Power requirements: AC 120 V, 60 Hz

Power consumption 70 W

(Maximum):

Picture tube: 13"

Dimensions: H: 13" (330mm)

: 13-7/8" (353mm)

D: 14-13/16" (377mm)

Weight: 19.4 lbs. (8.8kg)

•Designs and specifications are subject to change without notice.

• If there is a discrepancy between languages, the default language will be English.

PECIFICATIONS

T8200UA(EN).QX3 06.2.6 0:02 PM Page 28

ANT.

OUT

NDICE DE CONTENIDO

PREPARATIVOS PARA EL USO . . . . . . . . . . . .29

CONEXIONES DE ANTENA/CABLE . . . . . . . . . . .29

CONEXIÓN A UN DISPOSITIVO EXTERNO

(FRONTAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

SECCIÓN TV

FUNCIONAMIENTO Y AJUSTES DEL

TELEVISOR . . . . . . . . . . . . . . . . . . . . . . . . . .31

INSTALACIÓN INICIAL . . . . . . . . . . . . . . . . . . . . .31

PARA VER UN PROGRAMA DE TELEVISIÓN . . . .31

AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . .32

IDIOMA DE MENÚ DE PANTALLA . . . . . . . . . . . . .32

SECCIÓN DVD

REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .33

MENÚ DE DISCO/MENÚ DE TÍTULO . . . . . . . . . .33

CONEXIONES DE ANTENA/CABLE

REPARATIVOS PARA EL USO

Enchufe el cable entrante en la toma ANT., en la parte trasera de la unidad.

Si su servicio de cable le suministra una caja convertidora o si usted utiliza un sistema de satélite, conecte

la caja con esta unidad, como se indica a continuación.

Parte trasera de la

unidad

*NOTA

(NO DESCONECTAR DE LA CAJA)

Algunos sistemas de TV por cable utilizan

señales cifradas y requieren un convertidor

especial para recibir estos canales.

Consulte con su empresa de cable local.

Cable entrante desde antena

casera/empresa de cable (sin

caja de cable)

Cable entrante desde empresa de cable

o antena de satélite

Caja de cable o caja de satélite*

Antena

Cable

Señal de TV

ÍNDICE DE CONTENIDO / PREPARATIVOS PARA EL USO

NOTA:

Antes de enchufar la antena en la

toma ANT. de la unidad, compruebe

que la patilla no está doblada. Si

está doblada, enderece la patilla

como se indica en la ilustración y

enchufe la patilla a la toma ANT. de

la unidad.

(Debe ser

enderezada)

(Patilla recta)

Patilla doblada

Cable

Enchufe

Para su seguridad y

para evitar daños en la

unidad, desenchufe el

cable de la antena de la

toma ANT. antes de

mover la unidad.

T8200UA(ES).QX3 06.2.6 0:07 PM Page 29

OPEN / CLOSE

VIDEO HEADPHONE

AUDIO

Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice

las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad.

Conecte las tomas de salida de Audio/V

ídeo de otra fuente a la toma AUDIO y VIDEO de

esta unidad.

A continuación, utilice [SELECT] o [CH.

] hasta que aparezca "AUX" en la pantalla.

AUX

CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL)

Parte frontal de

la unidad

Cable de audio

(disponible en el mercado)

A la toma de salida de audio

A la toma de salida de vídeo

Cable de vídeo (disponible en el mercado)

(SALIDA)

(ENTRADA)

(SALIDA)

(ENTRADA)

Por ejemplo,

videograbadora o

videocámara, etc.

PREPARATIVOS PARA EL USO

T8200UA(ES).QX3 06.2.6 0:07 PM Page 30

VOLUMEN 20

C C C C C C C C C C C C C C C C

1 Presione [POWER] para encender la

unidad.

NOTES:

Si la pantalla del televisor

muestre interferencias “de nieve”

y no funcione bien durante más

de 10 segundos, aparecerá

“SUGERENCIAS ÚTILES”.

•Compruebe si la antena o el cable están conectados

correctamente. (Consulte “CONEXIONES DE

ANTENA/CABLE” en página 29).

• Ajuste “AUTOPROGRAMACIÓN DE CA.” en el menú

de AJUSTE DE CANAL. (Consulte “AJUSTE DE

CANAL” en página 32).

• Si pese a todo esos ajustes no funcionan

correctamente, llame a nuestro teléfono de asistencia

(en la página frontal en este manual del usuario).

2 Utilice [CH.

] o los botones numéricos

para seleccionar el número de canal deseado.

3 Utilice [VOL. X / Y] para ajustar el volumen.

Presione

[MUTE] para

silenciar al instante el sonido.

Presione de nuevo para

restaurar el nivel de sonido anterior.

NOTA:

• Incluso aunque apague la unidad en el modo DVD,

la unidad estará en el modo TV cuando vuelva a

encenderse.

PARA VER UN CANAL DE CABLE O SATÉLITE

Si la unidad está conectada a una caja de cable o de

satélite, utilice

[CH. K / L] para seleccionar CA3 o

CA4 según el ajuste de canal de salida del dispositivo

y seleccionar el canal deseado en dicho dispositivo.

PARA VER UNA ENTRADA EXTERNA

Cuando un equipo externo esté

conectado a las tomas de entrada

frontales AUDIO/VIDEO, presione

[SELECT] o [CH. K / L]

repetidamente hasta que

aparezca "AUX" en la pantalla.

CA 15

(Ejemplo)

SELECT LANGUAGE

ENGLISH

NEXT:PRESS VOL

ESPAÑOL

DESPUÉS:PRESIONE VOL

FRANÇAIS

APRÈS:PRESSEZ CH.

– INSTALACIÓN INICIAL –

CONECTE LA ANTENA O

CABLE O SATÈLITE EN

ESTA UNIDAD.

PRESIONE PLAY,

PARA REALIZAR EL

“AUTOPROGRAMACIÓN

DE CA.”.

INSTALACIÓN INICIAL

Cuando se enciende la unidad por primera

vez, se muestra la pantalla de IDIOMA

INICIAL. Seleccione el idioma de visualización de

pantalla y ejecute la autoprogramación del canal.

1 Después de finalizar la conexión de la

antena o del cable, conecte el cable de

alimentación a una toma estándar de CA.

2 Presione [POWER] para encender la unidad.

3 Presione cualquier tecla para

seleccionar el idioma del menú

de pantalla.

• ENGLISH:

[VOL.

]

• ESPAÑOL: [VOL.

]

• FRANÇAIS: [CH.

]

4 Confirme la conexión de la

antena (o del cable) y presione

[PLAY

• El sintonizador explora y

memoriza todos los canales

activos de su zona.

5 Cuando la exploración ha

finalizado, el sintonizador se

detiene en el canal

memorizado más bajo.

NOTAS:

• Puede salir del menú INSTALACIÓN INICIAL

presionando [SET-UP]. Si el botón se presiona durante

la exploración de canales, el sintonizador interrumpe la

exploración y se muestra el canal memorizado más bajo.

•

El menú INSTALACIÓN INICIAL se muestra cada

vez que usted enciende la unidad a menos que la

exploración se haya finalizado.

• En caso de que no pueda

recibirse ningún canal mediante la

exploración de canales, “NO HAY

SEÑAL DE TV” aparece en

pantalla. Apague la unidad y

compruebe la conexión de la

antena; a continuación, siga los pasos 1 a 5 otra vez.

•

Puede cambiar el después de finalizar la INSTALACIÓN

INICIAL mediante el menú IDIOMA o el menú AJUSTE DE

CANAL. (Consulte “IDIOMA DE MENÚ DE PANTALLA” o

“AJUSTE DE CANAL” en página 32).

FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR

AUX

SECCIÓN TV

PARA VER UN PROGRAMA DE TELEVISIÓN

Para utilizar los botones numéricos

•Canales de un dígito: (Ej.: 02, 03, 04, etc.)

Presione primero [0] para seleccionar un canal de un

dígito.

•Canales de dos dígitos: (Ej.: 12, 38, 95 ...)

Presione dos dígitos directamente.

•Canales de tres dígitos: (Ej. 115, 125 ...)

Presione primero

[+100], y luego presione los últimos

dos dígitos.

SECCIÓN TV

UNCIONAMIENTO Y AJUSTES DEL TELEVISOR

NO HAY SEÑAL DE TV

- SUGERENCIAS ÚTILES -

1.VERIFIQUE ANTENA/CABLE/

SAT

LITE EST

BIEN

CONECTADO.

2.VERIFIQUE

“AUTOPROGRAMACI

ÓN DE CA.

”

EST

Á BIEN AJUSTADO.

3.LEA LA P

ÁGINA FRONTAL

DEL MANUAL DEL USUARIO

O PANEL TRASERO PARA EL

NO.TEL.DE AYUDA A LOS

CLIENTES.

T8200UA(ES).QX3 06.2.6 0:07 PM Page 31

- TV PREP. -

AJUSTE DE CANAL

AJUSTE DE V-CHIP

B IDIOMA [ESPAÑOL]

TÍTULO [OFF]

Puede seleccionar el idioma del menú

de pantalla entre inglés, español y

francés.

1 Presione [SET-UP].

Utilice

[

] para ir hasta

"IDIOMA".

2 Presione [ENTER] repetidamente para

seleccionar "ENGLISH", "ESPAÑOL" o

"FRANÇAIS".

3 Presione [SET-UP] para salir del menú.

NOTAS:

• Esta función afecta solamente al idioma del menú de

pantalla y no a la fuente de sonido.

• Si por alguna razón el menú ya está en inglés o en

francés, presione [SET-UP] y mediante [

] vaya

a "LANGUAGE [ENGLISH]" o "LANGAGE [FRANÇAIS]",

y presione [ENTER] repetidamente para seleccionar el

idioma deseado, y presione [SET-UP].

CA 15

(Ejemplo)

- TV PREP. -

B AJUSTE DE CANAL

AJUSTE DE V-CHIP

IDIOMA [ESPAÑOL]

TÍTULO [OFF]

– AJUSTE DE CANAL –

AGREGAR / BORRAR (CATV)

AUTOPROGRAMACIÓN DE CA.

NO HAY SEÑAL DE TV

AJUSTE DE CANAL

IDIOMA DE MENÚ DE PANTALLA

SECCIÓN TV

FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR

Es necesario preseleccionar el canal al

principio o en caso de haber movido el

televisor a una zona distinta.

AUTOPROGRAMACIÓN DEL CANAL

1 Presione [SET-UP].

Utilice

[

] para ir hasta

"AJUSTE DE CANAL", y

presione

[ENTER].

2 Utilice [

] para ir hasta

"AUTOPROGRAMACIÓN DE

CA.", y presione

[ENTER].

El sintonizador explora y memoriza todos los

canales activos de su zona.

3 Cuando la exploración ha

finalizado, se muestra el canal

memorizado más bajo.

Si en la pantalla del televisor

aparece "NO HAY SEÑAL DE

TV", compruebe la conexión

de la antena y vuelva a

intentar.

NOTAS:

• La unidad puede reconocer canales de CATV como

canales de TV si el estado de la recepción es

deficiente. En tal caso, compruebe la conexión de la

antena y vuelva a intentar "AUTOPROGRAMACIÓN

DE CA.".

•

La autoprogramación del canal NO es necesaria

cuando está conectado a una caja de cable o de

satélite. Simplemente seleccione el canal para

entrada de caja de cable o de satélite (ej. CA3 o

CA4) en la unidad, y seleccione el canal deseado

en la caja de cable o de satélite.

T8200UA(ES).QX3 06.2.6 0:07 PM Page 32

SECCIÓN DVD

1 Presione [POWER] para

encender la unidad.

2 Presione [OPEN/CLOSE

3 Coloque el disco en la

bandeja, con la etiqueta hacia

arriba.

4 Presione [PLAY

• La bandeja se cerrará automáticamente y se

empezará la reproducción. Cuando reproduzca un

DVD que incluya un menú de títulos, este menú

puede aparecer en pantalla.

NOTAS:

• Cerrar la bandeja del disco manualmente o

presionando [OPEN/CLOSE

] también inicia la

reproducción.

• Con discos DVD que utilicen títulos para señales de

programa de reproducción, la reproducción puede

comenzar desde el segundo título o puede omitir

dichos títulos.

5 Para congelar la imagen, presione [PAUSE

]

durante la reproducción.

NOTA:

• El sonido se silenciará en modo de pausa.

6 Presione [STOP

] para

interrumpir temporalmente la

reproducción.

• Presione

[PLAY

] para

reanudar la reproducción.

• Para cancelar la reanudación y parar el disco,

presione

[STOP

] de nuevo.

NOTAS:

• La información de reanudación se conserva aunque

se apague la unidad.

• Puede aparecer un "icono

prohibido" en la zona superior

derecha de la pantalla del

televisor durante la operación. Esto significa que la

operación no está disponible en el disco.

REPRODUCCIÓN PASO A PASO

• Durante la reproducción, presione

[PAUSE F].

Puede avanzar la imagen fotograma a fotograma

presionando repetidamente

[PAUSE F].

•Para volver a la reproducción normal, presione

[PLAY

REPRODUCCIÓN BÁSICA

Un DVD puede contener menús para explorar

el disco y acceder a funciones especiales.

1 Presione [DISC MENU] o [TITLE].

•

Aparecerá el menú principal/menú de título del DVD.

•

Puede activar el menú incluso durante la reproducción.

2 Utilice [

] para seleccionar un

elemento y presione

[ENTER].

NOTAS:

• SI el disco tiene un menú de disco, aparecerán

distintas opciones de selección: idioma de sonido,

subtítulos, capítulos del título y otras.

• El contenido del menú y las correspondientes

operaciones de menú pueden variar según los

discos. Para más detalles, consulte el manual que

acompaña el disco.

MENÚ DE DISCO/MENÚ DE TÍTULO

Presione 'PLAY' para reproducir

desde aquí.

Para reproducir desde el inicio,

primero presione 'STOP' y luego

'PLAY'.

REANUDACIÓN ACTIVADA

AVANCE RÁPIDO / RETROCESO RÁPIDO

• Durante la reproducción, mantenga

presionado

[FWD

] para avance

rápido o

[REV

] para retroceso rápido.

• Cada vez que mantenga

presionado el botón, la

reproducción se acelera y el

nivel de velocidad aparece en la pantalla.

NOTAS:

•

En los discos DVD, la velocidad de avance/retroceso

rápido es diferente según el disco. La velocidad

aproximada es 1 (×2), 2 (×8), 3 (×20), 4 (×50) y 5 (×100).

• En discos de CD de audio la velocidad aproximada

es 1 (×2), 2 (×8) y 3 (×30).

•

Para volver a la reproducción normal, presione [PLAY

AVANCE LENTO / RETROCESO LENTO

•

Durante la reproducción, presione [PAUSE

• Mantenga presionado [FWD

] para

avance lento o

[REV

] para retroceso lento.

• Cada vez que mantenga

presionado el botón, la

reproducción se ralentiza y el

nivel de velocidad aparece en la pantalla.

NOTA:

• La velocidad de avance/retroceso lento varía según

el disco. La velocidad aproximada es 1 (1/16), 2 (1/8)

y 3 (1/2).

•Para volver a la reproducción normal, presione

[PLAY

T8200UA(ES).QX3 06.2.6 0:07 PM Page 33

MEMO

T8200UA(ES).QX3 06.2.6 0:07 PM Page 34

MEMO

T8200UA(ES).QX3 06.2.6 0:07 PM Page 35

Printed in Malaysia 1EMN21312

T8200UA

★★★★★

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or work-

manship as follows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year

from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are

excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the

date of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE

RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER

WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,

missing or if service was attempted by an unauthorized service center. This limited warranty does not

apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal

use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alter-

ations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse,

mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as

hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of

God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR

ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED

BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU

OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE

PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SER-

VICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHO-

RIZED SERVICE CENTER.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT

FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITH-

OUT PRIOR NOTICE.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,

please contact us at:

FUNAI CORPORATION

Customer Service

Tel :1-800-968-3429

http://www.SylvaniaConsumerElectronics.com

19900 Van Ness Avenue, Torrance, CA 90501

T8200UA(EN).QX3 06.2.6 0:02 PM Page 29

Magnavox MWC13D6 Manual de usuario

Marca: Magnavox

Modelo: MWC13D6

Tipo: Manual de usuario

Este manual también es adecuado para

Descargar PDF

informe

En otros idiomas

English: Magnavox MWC13D6 User manual

Magnavox MWC13D6 Manual de usuario

Este manual también es adecuado para

Magnavox MWC13D6 Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos