Yamaha GX-700 Manual de usuario

Categoría
Reproductores de CD
Tipo
Manual de usuario

Este manual también es adecuado para

3
DISC CD CHANGER
STANDBY TIMER
DOWN UP
VOLUME
STANDBY/ON
AUTO REVERSE CASSETTE DECK
DOLBY B NR
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC
1
DISC
2
DISC
3
DISC CHANGE OPEN
/
CLOSE
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
DIRECTION
PUSH OPEN
MINI COMPONENT SYSTEM GX–700
OWNER’S MANUAL
MODE D’EMPLOI
U C A
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
SAFETY INSTRUCTIONS
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other instructions
should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6 Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause
the unit and
cart combination to overturn.
7 Wall or Ceiling Mounting – The unit should be mounted to
a wall or ceiling only as recommended by the
manufacturer.
8 Ventilation – The unit should be situated so that its location
or position does not interfere with its proper ventilation. For
example, the unit should not be situated on a bed, sofa,
rug, or similar surface, that may block the ventilation
openings; or placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of air
through the ventilation openings.
9 Heat – The unit should be situated away from heat sources
such as radiators, stoves, or other appliances that produce
heat.
10 Power Sources – The unit should be connected to a power
supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.
15 Damage Requiring Service – The unit should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the unit
beyond those means described in the operating instruc-
tions. All other servicing should be referred to qualified
service personnel.
17 Power Lines – An outdoor antenna should be located away
from power lines.
18 Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT
Please record the serial number of this system
in the space below.
Model:
Serial No.:
The serial number is located on the rear of the
main unit.
Retain this Owner’s Manual in a safe place for
future reference.
19 For US customers only:
Outdoor Antenna Grounding – If an outside antenna is
connected to this unit, be sure the antenna system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING
MAST
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC
– NATIONAL ELECTRICAL CODE
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortion – and, most importantly, without affecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT :
When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions.
Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try to
eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
1
11
2
22
Unpacking After unpacking, check that the following parts are contained.
Déballage Après le déballage, vérifier que les pièces suivantes sont incluses.
Main unit
Appareil principal
Remote control
Télécommande
Batteries (size AA, UM/SUM-3, R6, HP-7)
Piles (format AA, UM/SUM-3, R6, HP-7)
Mounting brackets
Supports de montage
Screws
Vis
Pads
Patins
Front speakers
Enceintes avant
Center speaker
Enceinte centrale
Rear speakers
Enceintes arrière
Speaker cords
Câbles d’enceintes
AM loop antenna
Antenne-cadre AM
Indoor FM antenna
Antenne intérieure FM
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
DISC
1
DISC
2
DISC
3
3
DISC CD CHANGER
STANDBY TIMER
DOWN UP
VOLUME
PUSH OPEN
MINI COMPONENT SYSTEM GX–700
STANDBY/ON
AUTO REVERSE CASSETTE DECK
DOLBY B NR
DIRECTION
PROGRAM B.BOOST
MUSIC
INPUTINPUT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
3
33
1 cm 1 cm
20 cm20 cm
20 cm
20 cm
20 cm
20 cm 20 cm
20 cm
Setting this system Installation de ce système
English
Set this system allowing enough spaces around and behind the main unit to assure good ventilation. Be sure not to place
another unit or any object on top of the main unit to prevent the ventilation holes from being obstructed. Otherwise, it may
cause fire or damage to the main unit.
Note
When placing the speakers apart from the main unit, be sure to allow a space of at least 20 cm above, behind and on
both sides of the main unit. If the main unit is put in a rack, the front of it must be fully opened.
* The values must be applied to China and Singapore models only.
Français
Installer ce système en laissant assez d’espace autour et derrière l’appareil principal pour assurer une bonne
ventilation. Veiller à ne pas empiler un autre appareil ou un autre objet sur l’appareil principal afin de ne pas boucher
les orifices de ventilation. Sinon, on risquerait de provoquer un incendie ou d’endommager l’appareil principal.
Remarque
Lorsqu’on place les enceintes à une certaine distance de l’appareil principal, veiller à laisser un espace d’au moins 20
cm au-dessus, derrière et sur les deux côtés de l’appareil principal. Si l’on place l’appareil principal dans un meuble,
veiller à ce que le côté avant du meuble soit grand ouvert.
*
Les valeurs ne doivent être appliquées qu’aux modèles pour la Chine et Singapour.
4
44
DISC
1
DISC
2
DISC
3
3
DISC CD CHANGER
STANDBY TIMER
DOWN UP
VOLUME
STANDBY/ON
AUTO REVERSE CASSETTE DECK
DOLBY B NR
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
PHONES
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
TREBLEBASS
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
]
\ZX[YW
`
K
J
I
H
G,
U
T
F, S
E
D
C
B, R
A, Q
0, P
LONM
2
3
4
5
6
7
8
9
V
1
Front panel Panneau avant
5
55
1 Display panel
Panneau d’affichage
2 Remote control sensor
Capteur de télécommande
3 TIMER
4 STANDBY [p. 12]
5 B. BOOST [p. 30]
6 PROGRAM [p. 10, 33]
7 PHONES [p. 31]
8 BASS/TREBLE [p. 30]
9 Front cover
Couvercle avant
0 / [p. 18, 19]
A A/B/C/D/E [p. 19]
B PRESET/TUNING/BAND
[p. 18]
C VOLUME [p. 30]
D MUSIC [p. 31]
E INPUT ( / ) [p. 12, 18, 22, 29]
F HOUR [p. 9, 35]
G MIN [p. 9, 35]
H DISPLAY [p. 9, 35]
I MEMORY [p. 19, 20]
TIME ADJ [p. 9]
J STANDBY/ON [p. 10]
K AUTO/MANUAL [p. 18]
TIMER [p. 35]
L Disc tray
Plateau de disque
[p. 12]
M DISC (1, 2, 3) [p. 13]
N DISC CHANGE [p. 13]
O OPEN/CLOSE [p. 12]
P ( )/ ( ) [p. 13]
Q / [p. 12]
R [p. 12]
S RANDOM [p. 15]
T TIME [p. 16]
U REPEAT [p. 15]
V Tray
Plateau
[p. 22]
W MODE [p. 22]
X [p. 22]
Y DIRECTION [p. 22]
Z ( )/ ( ) [p. 23]
[ [p. 22]
\ [p. 22]
] REC/PAUSE [p. 24]
` DOLBY NR [p. 21, 24]
Amplifier/tuner Amplificateur/tuner
CD player Lecteur de disque compact
Tape deck Platine cassette
TUNER TAPE CD
AUX/MD
VCR VIDEO
6
66
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
REC/PAUSE
DIRECTION
CENTER
/
REAR
/
DELAY
TEST
PROGRAM
BASS
BOOST
MUSIC
POWER
SLEEP
INPUT
VOLUME
AB
TAPE
TUNER
CD
LEVEL
/I
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
REC
/
PAUSE
DIRECTION
CENTER
/
REAR
/
DELAY
TEST
PROGRAM
BASS
BOOST
MUSIC
POWER
SLEEP
INPUT
VOLUME
TAPE
LEVEL
/I
2
3
4
5
6
7
8
E
D
C
A
0
9
B
F
G
I
H
J
KLMNO
P
Q
V
UTS
R
1
Remote control Telecommande
7
77
1 Transmission window
Fenêtre de transmission
[p. 4]
2 Numeric buttons
Touches numériques
[p. 19]
3 A, B, C, D, E [p. 19]
4 TEST [p. 10]
5 CENTER/REAR/DELAY
[p. 33]
F Numeric buttons
Touches numériques
[p. 13]
G TIME [p. 16]
H PROG [p. 14]
6 LEVEL (+/–)
[p. 10, 33]
7 POWER
[p. 10]
8 SLEEP [p. 36]
9 PRESET ( / )
[p. 19]
0 TUNER [p. 18]
A PROGRAM
[p. 10, 33]
I MODE [p. 12]
J DISC SKIP [p. 13]
K REPEAT [p. 15]
L ( )/ ( ) [p. 13]
M RANDOM [p. 15]
N [p. 12]
O [p. 12]
P EDIT [p. 26]
Q R. TIME [p. 26]
R REC/PAUSE [p. 24]
S / [p. 23]
T [p. 22]
U [p. 22]
B MUSIC [p. 31]
C BASS BOOST
[p. 30]
D VOLUME (+/–)
[p. 30]
E INPUT ( / )
[p. 12, 18, 22, 29]
TUNER TAPE
↑↓
AUX/MD CD
↑↓
VCR VIDEO
Amplifier/tuner Amplificateur/tuner
CD player Lecteur de disque compact
Tape deck Platine cassette
V DIRECTION [p. 22]
Contents
English
Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment.
For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.
Page
SAFETY INSTRUCTIONS
.............................Inside of the Front Cover
Precautions.................................................
1
Features ......................................................
3
Preparations and connections..................
4
Installing batteries in the remote control .................. 4
Remote control operation range ..............................4
Setting up the speakers ...........................................5
Connections .............................................................7
Setting the clock.......................................................9
Adjusting brightness of the display ..........................9
Speaker balance adjustment .................................10
Compact disc player operation................
11
Basic play...............................................................12
To change the disc play mode ...............................12
To select another disc ............................................ 13
To select the desired track directly ......................... 13
To play the desired track (Skip)..............................13
To advance or reverse play rapidly (Search) .........13
To exchange a disc (or discs) while playing
(PLAYXCHANGE) ..................................................13
Program play..........................................................14
Random play ..........................................................15
Repeat play ............................................................15
Switching the time display......................................16
Tuning operation ......................................
17
Automatic tuning ....................................................18
Manual tuning ........................................................18
Manual preset tuning .............................................19
Automatic preset tuning .........................................20
Page
Playing back a tape..................................
21
General information ............................................... 21
Basic operation ...................................................... 22
Winding the tape ....................................................23
Searching for the beginning
of the desired selection ..........................................23
Recording .................................................
24
Basic recording ...................................................... 24
Recording from CDs utilizing the EDIT function..... 26
Operating the external units connected
with this system .......................................
29
Various sound control .............................
30
General sound control............................................ 30
Graphic equalizer...................................................31
Sound field processor ............................................32
Using the built-in timer ............................
35
Timer play ..............................................................35
Timer recording......................................................36
Sleep timer operation.............................................36
Appendix...................................................
37
Troubleshooting ..................................................... 37
Specifications.........................................................39
For basic source play, the following illustrations on top of
pages will help you to look for the section you need.
..... CD play ..... Tuning
..... Tape playback/recording
E-1
English
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Choose the installation location of this system carefully.
Avoid placing it in direct sunlight or close to a source of
heat. Also avoid locations subject to vibration and
excessive dust, heat, cold or moisture. Keep it away from
sources of hum such as transformers and electric motors.
Do not operate this system upside-down. It may overheat,
possibly causing damage.
Never open the cabinet. If something drops into the set,
contact your dealer.
The openings on the main unit cover assure proper
ventilation of the main unit. If these openings are
obstructed, the temperature inside the unit will rise rapidly.
Therefore, avoid placing objects against these openings,
and install the main unit in a well-ventilated area to
prevent fire and damage.
Always set the VOLUME control to minimum before
starting an audio source play: increase the volume
gradually to an appropriate level after play has started.
When not planning to use this system for long periods of
time (ie., vacation, etc.), disconnect the AC power plug
from the wall outlet.
Grounding or polarization – Precautions should be taken
so that the grounding or polarization of this system is not
defeated.
Do not use force on switches, controls or connection
wires. When moving the main unit, first disconnect the
power plug and the wires connected to other equipment.
Never pull the wire itself.
If an external appliance (TV, radio, etc.) interferes with this
system operation, move the main unit away from such an
appliance.
Do not attempt to clean this system with chemical
solvents; this might damage the finish. Use a clean, dry
cloth.
Be sure to read the “Troubleshooting” section regarding
common operating errors before concluding that this
system is faulty.
To prevent lightning damage, disconnect the AC power
plug and the antenna cable when there is an electrical
storm.
Do not plug the AC power plug to the wall socket before
you finish all connections.
Never allow metallic items (e.g. screwdrivers, tools, etc.) to
come near the tape deck’s record/playback head
assembly. Doing so may not only scratch or damage the
head’s mirror-smooth finish, it may change the magnetic
characteristics of the heads, causing a deterioration in
reproduction performance quality.
Although the tape deck’s record/playback heads are high
quality heads with outstanding reproduction
characteristics, they can become dirty through the use of
old tapes or from dust accumulation over time. This can
have a serious effect on reproduction quality. Clean the
heads regularly with one of the commonly available head
cleaners or with cleaning solutions.
The voltage to be used must be the same as that specified
on this system. Using this system with a higher voltage
than specified is dangerous and may result in a fire or
other types of accidents causing damage. YAMAHA will
not be held responsible for any damage resulting from use
of this system with a voltage other than specified.
The sound level at a given volume setting depends on
speaker location and other factors. Care should be taken
to avoid exposure to sudden high levels of sound, which
may occur when turning on this system with the volume
control setting at high, and to continuous high levels of
sound.
Sudden temperature changes and storage or operation in
an extremely humid environment may cause condensation
inside the cabinet. Condensation can cause this system to
malfunction.
To eliminate condensation:
CD pickup
Leave the power on with no disc loaded until normal
play becomes possible (about 1 hour).
Tape head
Leave the power on with no tape loaded until normal
playback becomes possible (about 1 hour).
Note
If condensation forms on the tape head, dirt or dust
may accumulate during use.
Remote control
Wipe off condensation on the transmission window
with a soft cloth before operating this system.
To prevent a malfunction of this system:
Do not use any non standard shaped disc (heart etc.)
available on the market, because it may damage this
system.
Do not use a disc with tape, seals, or paste on it,
because damage to this system may result.
Precautions: Read this before operating your system
This system is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
this system itself is turned off. This state is called the
standby mode.
In this state, this system is designed to consume a certain
level of power.
Note
Please check the copyright laws in your country to record
from records, compact discs, radio, etc. Recording of
copyright material may infringe copyright laws.
E-2
Precautions: Read this before operating your system
IMPORTANT
Please record the serial number of this system in the space
below.
Model:
Serial No.:
The serial number is located on the rear of the main unit.
Retain this Owner’s Manual in a safe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
WARNING
To reduce the risk of fire or electric shock, do not expose this
system to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
As the laser beam used in this system is harmful to the
eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
This system is classified as a
CLASS 1 LASER product.
The CLASS 1 LASER
PRODUCT label is located on
the rear exterior.
CLASS 1 LASER PRODUCT
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
CAUTION FOR CARRYING THE MAIN UNIT
Be sure not to carry or tip the main unit with discs
remaining in it.
CAUTION FOR MOVING THE MAIN UNIT
Before moving the main unit, first remove all discs from
the disc tray and close the tray by pressing the OPEN/
CLOSE button. After you confirm that “NO DISC” lights up
on the display, turn this system into the standby mode by
pressing the STANDBY/ON switch, and then disconnect
the power plug from the AC outlet.
Voltage Selector (China and General models only)
The voltage selector on the rear panel of the main unit
must be set for your local main voltage BEFORE
plugging into the AC main supply.
Voltages are 110/120/220/240 V AC, 50/60 Hz.
FREQUENCY STEP switch
(China and General models only)
Because the interstation frequency spacing differs in
different areas, set the FREQUENCY STEP switch (located
at the rear) according to the frequency spacing in your
area.
Be sure to change the setting of this switch with the AC
supply lead of this system disconnected from the AC outlet.
E-3
English
Features
General
5-Speaker Multichannel Audio System
(Two front, One Center and Two Rear
Speakers)
High Power Output
Front L, R: 80W + 80W (6) RMS, 0.9%
THD, 1 kHz
Center: 80W (6) RMS Output
Power,
0.9% THD, 1 kHz
Rear: 25W (6) RMS Output
Power,
0.9% THD, 1 kHz
4 External Audio/Video Component
Connecting Capability
Multiuse Timer/Sleep Timer
SUBWOOFER Output for Low Frequency
Expansion
Remote Control Capability
BASS BOOST
5-Band Spectrum Analyzer
DOLBY PRO LOGIC and DOLBY 3
STEREO Decoding
Sound Field Processing
(HALL and YMERSION)
Test Tone Generator for Easier Speaker
Balance Adjustment
3 Preset Graphic Equalizer Modes
(ROCK, POPS and JAZZ)
Compact Disc Player
3-Disc Carousel Type CD Changer
PLAYXCHANGE
Disc changing while playing
20-Track Random Access Programming
Repeat Play for Single Track/Entire Disc/
All Discs
Random Sequence Play
Tape Deck
Automatic Synchronized Recording with
CD
EDIT Function Useful for Recording
CD(s)
Automatic Reverse
Dolby B Type Noise Reduction System
Tuner
40 Station Preset Tuning
Automatic Preset Tuning
E-4
SET MD
REC/PAUSE
TAPE
DISC
1
DISC
2
DISC
3
3
DISC VCD CHANGER
DOWN UP
VOLUME
PUSH OPEN
MINI COMPONENT SYSTEM GX–700
MINIDISC RECORDER
MD
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
MODE
PTY SEEK
START
30°
30°
Preparations and connections
1. Turn the remote control over and remove the battery
compartment cover by pulling it up while pressing the edge
of the cover in the direction of the mark.
2. Insert the batteries (AA, R6, UM-3 type) according to the
polarity markings on the inside of the battery compartment.
3. Attach the battery compartment cover.
Notes
Remove the batteries if the remote control is not used for an
extended period of time.
If batteries leak, dispose of them immediately. Avoid
touching the leaked material and contact with clothing, etc.
Clean the battery compartment thoroughly before installing
new batteries.
Be sure to use the same type of batteries together.
Do not use a new battery and an old battery together.
Installing batteries in the remote control
Notes
The area between the remote control and the main unit must
be clear of large obstacles.
Do not expose the remote control sensor to strong lighting,
in particular, an inverter type fluorescent lamp. Otherwise,
the remote control may not work properly. If necessary,
position the main unit away from direct lighting.
Battery replacement
If you find that the remote control must be used closer to the
main unit, the batteries are weak. Replace both batteries with
new ones.
Remote control operation range
2
1
3
0,2 m – 6 m
(8” – 20’)
E-5
English
Setting up the speakers
m 4 channel 5 speaker configuration
This system employs a 5 speaker configuration: 2 front
speakers, 2 rear paralleled speakers and a center speaker.
The front speakers are used for outputting main source sound.
The rear speakers are for effect and surround sounds when
the sound field program
PRO LOGIC or HALL is selected.
The center speaker is for center sounds (dialog etc.) when the
sound field program PRO LOGIC or 3 STEREO is
selected.
m Placing the speakers
Front speakers: On both sides of the TV and almost the
same height as the TV.
Center speaker: Precisely between the front speakers.
Rear speakers: Behind your listening position, facing
slightly inward. Nearly 1.8 m (approx. six
feet) up from the floor.
Subwoofer: The position of the subwoofer is not so
(separate purchase)
critical because low bass tones are not
highly directional.
m Mounting the center speaker
Place the center speaker on the TV, on the floor under the TV
or in the TV rack so that it is stabilized.
When placing the speaker on top of the TV, to prevent the
speaker from falling down, put the provided pads at four points
on bottom of the speaker.
Preparations and connections
Front L Center Front R
DialogueDialogo
Rear L Rear R
Front L
TV set
Front R
Center
Rear L
Rear R
Subwoofer
E-6
Preparations and connections
m Mounting the rear speakers
Mount the rear speakers on a shelf, rack or on the floor, or
hang them on the wall.
To mount the rear speakers on the wall by using
commercially available speaker stands
The provided mounting bracket has 1 pair of screw holes (at
an interval of 60 mm). They are available for mounting the
speaker on a speaker stand.
* Those screw holes can be used with M4 screws only.
Note
It is recommended that you connect the speaker cords to the
speaker’s terminals before attaching the bracket to the
speaker.
1 Attach the bracket to the bottom of the speaker by using
the provided screw so that the convex part of the bracket
fits in the grooved part of the speaker as figured left.
2 Mount the speaker on the speaker stand by using the
screw holes on the bracket.
To mount the rear speakers on the wall without
using any bracket or stand
If desired, you can hang the speaker on the protruding screws
on the wall without using the bracket.
Fasten screws into a firm wall or wall support as figured left,
and hang the holes of the speaker on the protruding screws.
* Make sure that the screws are caught by a narrow part of
the holes securely.
WARNING:
Each of the rear speakers weighs 0.8 kg (1 lbs. 12 oz.).
Do not mount them on thin plywood or soft wall
surface material, as the screws may come out of the
flimsy surface, causing the speakers to fall down and
be damaged, or result in personal injury.
Do not fasten the speakers to the wall with nails,
adhesives, or other unsound hardware. Long-term use
and vibrations may cause them to fall down.
To avoid accidents resulting from tripping over loose
speaker cords, fix them to the wall.
Select a proper position on the wall to mount the
speaker and the stand so that no one will hit his head
or forehead on the projections of them, resulting in
personal injury.
60 mm
Mounting
bracket
Screw
Tapping screw
(Available at the
hardware store)
Min.
12 mm
65 mm
Wall or wall
support
E-7
English
Preparations and connections
Never plug the AC supply lead of this system into the AC outlet until all connections are completed.
Connections
Caution
Do not let the bare speaker wires touch each other as this could damage the amplifier and/or speakers.
When connecting a subwoofer (separate purchase)
You may wish to add a subwoofer to reinforce the bass frequencies.
When connecting a subwoofer to this system, connect the SUBWOOFER OUT terminal of this system to the INPUT terminal of the
subwoofer.
* Ordinary subwoofers, including the Yamaha Active Servo Processing Subwoofer System, are designed so that the amplifier and
subwoofer are in the same unit.
* The SUBWOOFER OUT terminal outputs low frequencies from the left front, center and right front channels.
(The cut-off frequency of this terminal is 200 Hz.)
m Connecting speakers
Connect the speakers to the corresponding speaker terminals on the rear of the main unit respectively by using the speaker cords.
Make sure that the polarity of the speaker cords is correct, that is the + and – markings are observed. If these cords are reversed,
the sound will be unnatural and lack bass.
On the main unit
Red: positive (+)
Black: negative (–)
1 Press up the tab.
2 Insert the bare wire.
[Remove approx. 5mm (1/4”)
insulation from the speaker
wires.]
3 Press down the tab and
secure the wire.
1
2
3
On the speakers
Red: positive (+)
Black: negative (–) 1 Press the tab
2 Insert the bare wire.
[Remove approx. 5mm
(1/4”) insulation from
the speaker wires.]
3 Release the tab and
secure the wire.
MAINS
RL
OUT
IN
AUX/MD
VIDEO SIGNAL
MONITOR
OUT
OUT
VCR
IN
VIDEO
OUT
SUBWOOFER
SPEAKERS
SEE OWNER’S MANUAL
FOR CONNECTION.
SPEAKERS
CENTER: 6
MIN./SPEAKER
REAR: I 2
MIN./SPEAKER
CENTERREAR REAR
R L
6
MIN./SPEAKER
FRONT
R L
R
L
L R
INPUT
Subwoofer system
(Separate purchase)
Rear speaker
1
2
3
Front speakers
Rear speaker
Center speaker
To AC outlet
(U.S.A model)
E-8
Preparations and connections
m Connecting external components
This system can be connected with external audio and video
components. Make connections between this system and the
components using RCA pin plug connector cables correctly,
that is to say L (left) to L and R (right) to R. Also, refer to the
owner’s manual for the component to be connected to this
system.
* A digital-to-digital recording is possible from a CD played on
the built-in CD player to an MD (or tape) on an external MD
recorder (or DAT) by connecting the DIGITAL OUT
(OPTICAL) terminal on the rear of the main unit to the MD
recorder (or DAT).
m Antenna connection
(1) Supplied FM antenna
Connect the FM antenna wire to the corresponding terminal
and direct the FM antenna wire to the direction where the
strongest signal can be received.
(2) Supplied AM loop antenna
Connect the AM loop antenna wires to the corresponding
terminals. Position the AM loop antenna for optimum
reception.
Notes
When static is still heard even after adjusting the position of
the AM loop antenna, try reversing the wire connections
(from the right terminal to the left one, and vice versa).
The AM loop antenna should be placed apart from the main
unit. The antenna may be hung on a wall.
Using an external antenna
Use an external FM antenna instead of an indoor FM
antenna if you need better reception. Consult your dealer.
Use an external AM antenna if you need better reception.
Consult your dealer.
(1)
(2)
ANTENNA
75 UNBAL.
FM GND AM
ANTENNA
75 UNBAL.
FM GND AM
DIGITAL OUT
OPTICAL
ANTENNA
75 UNBAL.
FM GND AM
DIGITAL OUT
OPTICAL
RL
OUT
IN
AUX/MD
VIDEO SIGNAL
MONITOR
OUT
OUT
VCR
IN
VIDEO
OUT
SUBWOOFER
SPEAKERS
SEE OWNER’S
M
FOR CONNECTI
O
CENTER: 6
MIN./
S
REAR: I 2
MIN./
S
CENTERREAR
R
FRONT
R
L
TV monitor
VCR
LD/DVD player, etc.
MD recorder, etc.
(U.S.A. model)
(U.S.A. model)
English
E-9
DISC
1
DISC
2
DISC
3
3
DISC CD CHANGER
STANDBY TIMER
DOWN UP
VOLUME
STANDBY/ON
AUTO REVERSE CASSETTE DECK
DOLBY B NR
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
PHONES
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
TREBLEBASS
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
1
2
3
RANDOM
REPEAT
HOUR
MIN
RANDOM
REPEAT
HOUR
MIN
DISPLAY
MEMORY
TIME ADJ
MEMORY
TIME ADJ
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
1 While the power is on, press DISPLAY to display the time.
2 While holding TIME ADJ pressed, press HOUR and set the
hour.
* Press HOUR once to advance the time by 1hour. Press
and hold to advance continuously.
3 While holding TIME ADJ pressed, press MIN and set the
minute.
* Press MIN once to advance the time by 1
minute. Press and hold to advance continuously.
* The hour setting will not advance even if minute is
advanced from “59” to “00”.
Australia model use a 24-hour display. U.S.A. and Canada
models use a 12-hour display. For China and General
models, either the 24-hour display or the 12-hour display
[shown by “AM (PM) 12:00”] is selected depending on the
setting of the FREQUENCY STEP switch on the rear
panel, so you cannot select the desired type freely.
Note
In the event of a power failure or when the AC supply lead is
disconnected, the time display will go out, however, the clock
will function for about 5 minutes without any power supply.
Otherwise, the time display will flash on and off to indicate that
the time must be reset.
If desired, you can adjust the brightness of the display.
Press and hold DISPLAY for more than 2 seconds so that
“DIMMER ±0” appears on the display.
While holding DISPLAY pressed, turn VOLUME clockwise to
increase or counterclockwise to decrease brightness.
Control range: ±0 to –6 (Preset value: ±0)
Setting the clock
Adjusting brightness of the display
Changes.
Changes.
Preparations and connections
VOLUME
DISPLAY
E-10
Preparations and connections
1 Turn on the power.
2 Turn down the volume to minimum.
3 Press PROGRAM once or more until PRO LOGIC
lights up on the sound field program indicator.
4 Press TEST.
* “TEST” flashes on and off on the display.
5 Press VOLUME + (up) to increase the volume.
You will hear a test tone (like pink noise) from the left front
speaker, the center speaker, the right front speaker, and
then the rear speakers, for about 2.5 seconds each. The
display changes as shown below.
* The test tone from the left rear speaker and the right rear
speaker will be heard at the same time.
6 Press LEVEL +/– to adjust the sound output levels of the
center speaker and the rear speakers so that the level
becomes almost as same as that of the front speakers.
ex.)
7 When the adjustments are finished, press TEST to cancel
the test tone.
* “TEST” disappears from the display.
Note
Once you have completed these adjustments, you can adjust
whole sound level on your audio system by using VOLUME on
the main unit (or the remote control).
Speaker balance adjustment
You can adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator.
This is important for the best performance of the built-in Dolby Pro Logic surround decoder.
The adjustment of each speaker output level should be done at your listening position with the remote control. Otherwise,
the result may not be satisfactory.
PROGRAMMUSIC
TEST
CD
PRO LOGIC
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
3
2, 5
4, 7
6
1
Changes.
E-11
English
Compact disc player operation
100 350 1K 3.5K 10K
MUSIC
PROG
S F REP
VOLUME
OVER 15
1234
78910
13 14 15
5
11
6
12
TOTAL REM
TRACK
RANDOM
CD
PROGRAM
312
8
0
547
9
6
1 TRACK (track number)
2 Time display
3 Disc indicator
The disc of the number located on the top of this indicator is
now being selected.
4 CD (input source indicator)
5 (play)
6 RANDOM
Display information
7
Music calendar
Track numbers on the currently selected disc will be
illuminated (up to the number 15).
8 OVER 15
This indicator will be illuminated when the currently selected
disc has more than 15 tracks.
9 PROG (program)
0 (S, F) REP [(single, full) repeat]
Each indicator mentioned with a number on pages 12–16 corresponds to the indicator with the same number on this page.
E-12
DISC
1
DISC
2
DISC
3
3
DISC CD CHANGER
STANDBY TIMER
DOWN UP
VOLUME
STANDBY/ON
AUTO REVERSE CASSETTE DECK
DOLBY B NR
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
PHONES
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
TREBLEBASS
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
Basic play
1
Turn on the power.
2 Select the CD player by pressing INPUT or until
“CD” (
2, 4) appears on the display.
3 Press OPEN/CLOSE to open the disc tray.
4 Place discs on the table, label side upward.
* Up to three discs can be loaded on the table.
To load the third disc, rotate the disc table by pressing
DISC CHANGE on the front panel.
* 8 cm (3”) discs can be played without an adaptor.
* The disc placed on the left side is played first.
5 Press OPEN/CLOSE to close the disc tray.
* The total number of tracks (
1) and the total playing
time of the disc being selected (
2) will be displayed for
several seconds.
* If the compact disc contains more than 15 tracks, the
“OVER 15” indicator (
8) will light up.
* If the disc tray is closed by pushing the front edge of the
tray, play will begin automatically.
6 Press / to begin play.
To pause
11 Press / .
* The “
indicator (5) will flash.
22 Press / to resume play from the same point.
To stop play
Press .
To finish using this system
Turn this system into the standby mode by pressing
STANDBY/ON. (The STANDBY indicator will light up and the
display will go out.)
Direct operation
DISC (1, 2 or 3) and OPEN/CLOSE on the front panel and
on the remote control will work if they are pressed when
this system is in the standby mode or another input source is
selected.
3, 5
Compact disc player operation
Lights up only when the all disc play
mode is selected.
To change the disc play mode
If necessary, change the disc play mode by pressing MODE on
the remote control.
Single disc play mode: Only the designated disc is
played.
All disc play mode: All discs on the disc tray are
played sequentially.
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
2
1
MODE
2
4
1
4
STANDBY indicator
6, 11, 22
6, 11, 22
E-13
English
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
During play, you can open the disc tray by pressing DISC
CHANGE without interrupting play. However, in this case,
pressing DISC SKIP or DISC (1, 2 or 3) is invalid.
To exchange a disc (or discs) while
playing (PLAYXCHANGE)
To select the desired track directly
By using the numeric buttons on the remote control, any track
you wish to listen to can be played directly.
Use the numeric buttons to select the desired track number.
Play will begin automatically.
A. For example, to choose track 5
Press 5.
B. For example, to choose track 12
(1) Press +10.
(2) Within a few seconds, press 2.
C. For example, to choose track 20
(1) Press +10.
(2) Within a few seconds, press +10 again.
(3) Within a few seconds, press 0.
Note
If you select a track number higher than the number of tracks
on the disc, only the last track of the disc may be played.
To play the desired track (Skip)
Press to skip forward or to skip backward.
Press once for each track to be skipped.
Note
This function can also be performed while the CD player is
stopped. Press
/ when the desired track number appears
on the track number display. Play will begin from the
beginning of the track.
Press DISC SKIP on the remote control once or more (so that
the corresponding disc number is located on the top of the
disc indicator (
3)).
Pressing DISC (1, 2 or 3) will select the disc directly, and play
will begin from track 1 automatically.
To select another disc
Compact disc player operation
DISC CHANGE
DISC (1, 2, 3)
/
( )
( )
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
DISC SKIP
( )
Numeric
buttons
( )
To advance or reverse play rapidly
(Search)
Press and hold to advance play rapidly, and to
reverse play rapidly.
E-14
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
Compact disc player operation
Program play
You can program up to 20 tracks in any desired order.
1 When the CD player is stopped, press PROG to prepare for
programming.
* “PROG” (
9) and “P-01” (2) will light up on the display,
and all track numbers on the selected disc (
7) will
begin flashing.
2 If necessary, select the desired disc by pressing DISC
SKIP.
* Just after you change the disc, the CD player reads the
contents of the newly selected disc for a few seconds.
During this internal operation, if you go on to the next
step, “WAIT” (
2) appears on the display and your
operation is canceled.
3 Use the numeric buttons to select the desired
track number.
* The selected track number (1) and the total play time
of the programmed tracks (
2) will light up on the
display, and soon it will be replaced by the display of the
next play order (2). Programmed track numbers on the
selected disc will stop flashing and light up on the music
calendar (7).
* Pressing TIME displays the total play time of the
programmed tracks (
2) for about 1 second, and then it
is replaced by the display of the next play order (
2).
4 Repeat steps 2 and 3 to program other tracks.
5 Press / to start the program play.
Notes
The total time of the programmed tracks will not be
displayed, if track number 16 or higher is programmed.
Skip ( / ) can be performed during play, but only
within the range of the programmed tracks.
Search ( / ) can be performed during play to search
all tracks, including unprogrammed tracks.
REC/PAUSE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
1
2
5
TIME
3
TIME
5
Display information during programming
Music calendar
Play order
Selected disc
Total playing timeSelected track number
K
K
AM
C
HALL
YMERSION
EDIT
PROG
S F REP
VOLUME
AB
OVER 15
1234
78910
13 14 15
5
11
6
12
TRACK
VCD PBC
TIMER
SLEEP
NOR TEST
PHANTOM
RANDOM
TUNER
CD
MD
TAPE
AM
C
HALL
YMERSION
EDIT
PROG
S F REP
VOLUME
AB
OVER 15
1234
78910
13 14 15
5
11
6
12
TOTAL
TRACK
VCD PBC
TIMER
SLEEP
NOR TEST
PHANTOM
RANDOM
TUNER
CD
MD
TAPE
K
K
To cancel a programmed sequence
There are several methods as described below.
Press while the CD player is stopped.
Open the disc tray.
Turn this system into the standby mode.
To check (and correct) program data
1. Press PROG when the CD player is stopped.
2. Every time
is pressed, the track numbers and
sequential order of the programmed tracks can be checked
one after another. The display of the track number can be
returned (sequentially in reverse order) by pressing
.
3. If you want to correct the program data,
press a numeric
button to select the track to replace the one displayed. The
previously programmed track will be cleared from the
memory and the new one will be programmed.
To complete the correction, press PROG or
/ once
again.
E-15
English
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
Compact disc player operation
(off) S REP
F REP
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
REPEAT
REPEAT
Repeat play
All discs, a disc, a single track or a programmed sequence
can be continuously repeated.
Press REPEAT once or more to select the desired repeat play
mode so that the S REP or F REP indicator (
0) is
illuminated.
Repeat play modes
SINGLE REPEAT (S REP)
A single track is played repeatedly.
* This is also available in the program play mode and the
random play mode. (If the repeat play mode is switched off,
the program play mode or the random play mode will be
resumed.)
FULL REPEAT (F REP)
When the CD player is in the single disc play mode:
The designated disc is played repeatedly.
* In the random play mode, the selected disc is repeatedly
played, but the order of tracks is different every time.
When the CD player is in the all disc play mode:
All discs on the disc tray are played repeatedly.
* In the random play mode, the random play is performed
among all discs and repeated with a different order of
tracks every time.
Note
In the program play mode, a sequence of programmed tracks
is played repeatedly.
To cancel the repeat play
Press REPEAT once or more so that the (S, F) REP indicator
(
0) goes out.
Random play
Tracks on a selected disc or all discs on the disc tray can be
played randomly.
1 If necessary, switch the disc play mode by pressing
MODE.
* If the single disc play mode is selected, select the
desired disc by pressing DISC SKIP.
2 Press RANDOM to begin random play.
* The “RANDOM” indicator (6) will light up.
To cancel the random play
Press , or press RANDOM so that the “RANDOM” indicator
(
6) will go out.
Note
This feature will not function during programming or program
play.
RANDOM
MODE
DISC SKIP
RANDOM
E-16
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
Compact disc player operation
Switching the time display
Every time TIME is pressed, the display will change as
described below.
[Example]
When the second track is being played. (Refer to the
illustration on the left.)
1 The elapsed play time for the current track will be
displayed.
2 The remaining play time for the current track will be
displayed.
3 The total play time of the disc will be displayed.
4 The total remaining play time of the disc will be
displayed.
TIME
TIME
1
2
3
4
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
TRACK
REM
TRACK
TOTAL
TRACK
TOTAL REM
TRACK
E-17
English
Tuning operation
5 TUNED
6 MEMORY
7 TUNER (input source indicator)
1 Preset station group and number indicator
2 Multi-information display
3 STEREO
4 AUTO
Display information
Each indicator mentioned with a number on pages 18–20 corresponds to the indicator with the same number on this page.
100 350 1K 3.5K 10K
PROGRAMMUSIC
KARAOKE
VOLUME
PRESET
STEREO
AUTO
TUNED
MEMORY
TUNER
21
73
456
E-18
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
Automatic tuning
1
Turn on the power.
2 Press INPUT or until “TUNER” (2, 7) appears on
the display, or simply press TUNER on the remote control.
3 Select the reception band (FM or AM) by pressing
PRESET/TUNING/BAND confirming it on the display (
2).
* Do not select the preset tuning mode (in which
“PRESET” (1) lights up on the display).
4 Press AUTO/MANUAL so that “AUTO” (4) lights up on the
display.
5 Press to tune to a higher frequency, or press to tune
to a lower frequency.
(When tuned in to a station, “TUNED” (5) will light up on
the display.)
6 If the station where tuning search stopped is not the desired
one, follow step 5 again.
* If the tuning search does not stop at the desired station,
change to the Manual tuning method as described
below.
* “STEREO” (
3) will light up when an FM stereo
broadcast with sufficient signal strength is received.
Direct operation
TUNER on the remote control will work if it is pressed when
this system is in the standby mode or another input source is
selected.
Manual tuning
11
Follow steps 1 to 3 of the Automatic tuning method.
22 Press AUTO/MANUAL so that “AUTO” (4) disappears
from the display.
33 Press and hold to tune to a higher frequency, or press
and hold
to tune to a lower frequency.
Release it just before reaching the desired frequency, and
then press it repeatedly until the desired frequency
appears.
(When tuned in to a station, “TUNED” (
5) will light up on
the display.)
Note
If you tune in to an FM station manually, it is received in
monaural to increase the signal quality.
3
2
4, 22
5, 33
2
2
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Tuning operation
1
1
E-19
English
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Tuning operation
Manual preset tuning
The built-in tuner can store station frequencies selected by
tuning operation. With this function, you can select any desired
station only by calling the corresponding preset station
number. Up to 40 stations (8 stations x 5 groups) can be
stored.
m To store stations
1 Turn on the power.
2 Press INPUT or until “TUNER” (2, 7) appears on
the display, or simply press TUNER on the remote control.
3 Tune in to the desired station.
4 Press MEMORY.
* “MEMORY” (
6) and “PRESET” (1) will flash on the
display for about 5 seconds.
5 Select the desired group (A – E) of preset stations by
pressing A/B/C/D/E confirming it on the display, before
“MEMORY” (6) goes out.
6 Select a preset station number by pressing or
repeatedly or pressing a numeric button (1 to 8) before
“MEMORY” (
6) goes out.
7 Within about 5 seconds, press MEMORY again.
m To recall a preset station
11 Select a group of preset stations by pressing A/B/C/D/E.
22 Select the desired preset station number by pressing or
repeatedly or pressing a numeric button (1 to 8).
Notes
A new setting can be programmed in place of the former
one.
For presets the setting of AUTO/MANUAL is stored along
with the station frequency.
5, 11
4, 7
6, 22
6, 22
5, 11
1
1
2
2
E-20
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
3
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Tuning operation
Automatic preset tuning
You can make use of an automatic preset tuning function. With
this function, the built-in tuner performs automatic tuning. Up
to 40 stations are stored automatically.
1 Turn on the power.
2 Press INPUT or until “TUNER” (2, 7) appears on
the display, or simply press TUNER on the remote control.
3 Press and hold MEMORY for more than 2 seconds.
* The “MEMORY” (
6) and “AUTO” (4) indicators flash.
The tuner performs automatic tuning and searches FM and
AM stations in that order. Received stations are programmed
to A1, A2 ... A8 sequentially.
When the automatic preset tuning is completed;
The display shows the frequencies of the first preset station
(stored to A1).
If you want to check the contents and the number of preset
stations, follow the procedure of the section “To recall a preset
station” on the previous page.
To recall a preset station
Simply follow the procedure of the section “To recall a preset
station” on the previous page.
Notes
The automatic preset tuning search will be performed
through all frequencies until 40 stations are stored. If the
number of received stations is less than 40, the search will
stop after searching all frequencies.
* Since FM stations are searched for first, there may be a
case that 40 preset stations are occupied by FM stations
only.
With this function, only stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune in to it with the
Manual tuning method (in monaural) and program it by
following the procedure of the section “To store stations” on
the previous page.
You can replace a preset station with another FM or AM
station manually by simply following the procedure of the
section “To store stations” on the previous page.
2
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the AC supply lead is disconnected
from the AC outlet or the power is cut due to temporary
power failure. If, however, the power is cut for more than
one week, the memory may be erased. If so, it can be
re-programmed by simply following the Preset tuning steps.
2
2
1
1
E-21
English
Playing back a tape
Do not use C-120 tapes or poor-quality tapes, since they
can cause malfunctions.
Before loading a tape on the tray, tighten the tape slack
with a pen or pencil.
Tapes have removable tabs which prevent accidental
recording or erasing from taking place. Removing the tab
on the top left protects the side facing you from erasure.
Cover the tab holes with adhesive tape to erase or record
again.
The tape deck features an automatic tape selector. Just
load the tape, and the tape formula being used will be
sensed automatically.
The tape deck can play back metal tapes as well as normal
or chrome tapes, however recording cannot be done on
metal tapes with good sound quality.
Dolby B Type Noise Reduction
Dolby noise reduction is an extremely effective method of
reducing undesirable background hiss on tapes. The built-in
tape deck incorporates Dolby B type noise reduction system.
DOLBY NR is useful to both recording and playback; be sure
that the same noise reduction is used on recording and
playback.
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
are trademarks
of Dolby Laboratories Licensing Corporation.
General information
About the tape counter
The tape deck is equipped with a tape counter that is useful
for searching and locating a desired point on the tape. The
tape counter is shown on the display.
Pressing
(stop) when the deck is stopped will reset the tape
counter to “0000”.
Display information
1 Tape counter
2 NR (DOLBY NR)
3 Tape direction indicator
4 Reverse mode indicator
5 TAPE (input source indicator)
6 TAPE REC
7 (play)
8 EDIT
9 Tape side indicator
Each indicator mentioned with a number on pages 22–28 corresponds to the indicator with the same number on this page.
100 350 1K 3.5K 10K
PROGRAMMUSIC
PRO LOGIC
HALL
3 STEREO YMERSION
EDIT
PROG
S F REP
VOLUME
AB
RANDOM
TUNER
CD
MD
TAPE
100 350 1K 3.5K 10K
PROGRAMMUSIC
KARAOKE
VOLUME
REC
TAPE
TAPE
NR
AB
EDIT
1
2
34
5
8
7
6
9
E-22
DISC
1
DISC
2
DISC
3
3
DISC CD CHANGER
STANDBY TIMER
DOWN UP
VOLUME
STANDBY/ON
AUTO REVERSE CASSETTE DECK
DOLBY B NR
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
PHONES
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
TREBLEBASS
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Playing back a tape
Basic operation
1
Turn on the power.
2 Press INPUT or until “TAPE” (1, 5) appears on
the display.
3 Open the tray by pressing .
4 Load the tape on the tray with side A upward, and close the
tray by pressing
or pushing the front edge of the tray
gently.
5 Press MODE or DIRECTION to change the current setting
if necessary.
5
2
3, 4
6
5
4
6 Press .
Playback begins.
To stop playback
Press .
To remove the tape
Open the tray by pressing .
6
2
5
Tape direction indicator (3)
Moves slowly in the current tape running
direction during playback.
Reverse mode indicator (4)
1
1
Direct operation
and will work if they are pressed when this system is in
the standby mode or another input source is selected.
Side A only
Side B only
Side A Side B
(Repeats 8 times)
Starts from side A.
Side B Side A
(Repeats 8 times)
Starts from side B.
(Side A is not played
at the first time.)
MODE
DIRECTION
Side A Side B
Side B only
E-23
English
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Winding the tape
1
Press or to wind the tape.
2 Press to stop.
Note
When the tape is wound to the end, the tape deck will then
function as described below.
: The tape stops at the end.
: If the winding direction is , when the tape reaches
the end, playback automatically starts from the
reverse side.
If the winding direction is
, the tape stops at the
end.
: When the tape reaches the end, playback
automatically starts from the reverse side.
Searching for the beginning of the
desired selection
Press or during playback.
To listen to the same selection
Press if the direction of the current playback is .
Press
if the direction of the current playback is .
To listen to the next selection
Press if the direction of the current playback is .
Press
if the direction of the current playback is .
Notes
This function may not work for tapes with
* Material with long pauses or quiet passages.
* Low recording levels or excessive noise.
* Pauses of less than 4 seconds between selections.
If searching is carried out at the first or the last part of a
selection, the desired selection may not be found.
Playing back a tape
Moves rapidly in the current tape running
direction while winding.
Flashes on and off.
Moves rapidly in the current tape
running direction while searching.
E-24
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Notes
Adjusting the VOLUME, BASS and TREBLE controls,
B. BOOST and MUSIC buttons have no effect on the
recorded sound. The recording level is automatically
adjusted.
A sound field program may have effect on the recorded
sound. If a sound field program is selected, cancel it before
you begin recording. Refer to page 33 for how to cancel the
sound field program.
If you want to make a recording using Dolby NR, press
DOLBY NR so that
NR” (2) lights up on the display. If
not, turn “
NR” (2) off.
* For details, refer to “Dolby B Type Noise Reduction” on
page 21.
Basic recording
1
Turn on the power.
2 Press INPUT or once or more to select the source
you want to record.
3 Load a tape on the tray with side A upward.
4 Press DIRECTION or MODE to change the current setting
if necessary.
5 Press REC/PAUSE.
* “TAPE REC” (
6) lights up on the display.
6 Begin playing the source to be recorded.
* When playing a CD, the recording automatically begins a
few seconds before the CD play begins. You do not need
to follow step 7.
7 Press of the tape deck.
Displaying the tape counter
During recording, the information of the playing source is
displayed in place of the tape counter (1). Press DISPLAY to
change the display to the tape counter. Pressing DISPLAY
again will restore the previous display mode.
Recording
2
7
5
2
5
4
7
3
4
4
1
1
Side A only
Side B only
Side A Side B
Side B only
MODE
DIRECTION
E-25
English
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Recording
To stop recording temporarily
Press REC/PAUSE.
* Press
of the tape deck to resume recording.
To stop recording
Press of the tape deck.
To change the disc and track when recording from a
CD
1 Press of the CD player.
* The recording stops temporarily.
2 Select the disc by pressing DISC SKIP if necessary.
3 Choose the track you want to record next by using or
, and then press / of the CD player to resume
recording (or simply press the corresponding numeric
button(s) on the remote control).
Notes
A sequence of tracks in the program play mode and
random play mode of the CD player can be recorded in the
same way.
During recording, by simply pressing
or , you can
rewind the tape to the point where the recording started.
REC/PAUSE
DISC SKIP
Numeric
buttons
REC/PAUSE
E-26
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Recording
Recording from CDs utilizing the
EDIT function
The EDIT function performs recording on both sides of the
tape.
m EDIT recording
1 Press INPUT or once or more until “CD” (1, 5)
appears on the display, and load the disc to be recorded.
2 Select the disc by pressing DISC SKIP.
3 Load a tape on the tray with side A upward.
4 Select “ ” (4) by pressing MODE, and “ ” (3) by
pressing DIRECTION.
5 Press R. TIME on the remote control to select the length of
the tape to be used. Whenever pressed, the display
changes as shown below.
When using tapes other than C-46, C-54, C-60 or C-90
After pressing R. TIME, input the tape length by using the
numeric buttons on the remote control.
6 Press EDIT. (“EDIT” (8) lights up on the display.)
The following operations are carried out automatically.
1) Tracks on the disc are automatically divided into side A
and side B. You can check the process by watching the
display.
* The tape side indicator (
9) shows the side currently
selected.
2) If the tape is not rewound to the end, it will rewind to the
end rapidly.
3) The end part of the tape on which recording cannot be
done is wound.
4) Both CD play and recording starts. Recording is carried
out on both sides of the tape continuously.
Notes
When the CD player is in the all disc play mode, if the
tape’s total possible recording time is longer than the total
playing time of the selected disc, tracks on another disc are
recorded continuously.
In this case, as many as three discs can be recorded
automatically.
The CD player’s repeat play mode will be canceled during
this recording mode.
(off) C-46 C-54 C-60 C-90
1
4
1
2
5
6
Numeric
buttons
3
4
4
E-27
English
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Recording
m Auto-EDIT recording
This function automatically changes the order of tracks so that
the unrecorded space of side A is minimized.
1 Follow steps 1– 5 on previous page.
2 Press PROG.
3 Press R. TIME.
“Auto A
>>> will light up during programming for side A,
and “Auto B
>>> will light up during programming for side
B.
4 Press EDIT. (“EDIT” (8) lights up on the display.)
The recording starts.
3
4
2
To cancel the EDIT function
Before recording, press of the CD player or the tape deck.
To stop recording
Press of the tape deck.
(At this time, CD play automatically stops.)
E-28
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
M
PROG
VOLUME
A
OVER 15
1234
78910
13 14 15
5
11
6
12
REM
TRACK
CD
NR
K
AM
HALL
YMERSION
EDIT
PROG
S F REP
VOLUME
A B
OVER 15
1234
78910
13 14 15
5
11
6
12
TRACK
VCD PBC
TIMER
SLEEP
NOR TEST
PHANTOM
RANDOM
TUNER
CD
MD
TAPE
NR
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Recording
m Manual EDIT recording
You can program tracks manually while watching the
remaining time on both sides of the tape.
1 Press INPUT or once or more until “CD” (1, 5)
appears on the display, and load a disc (or discs) on the
disc tray.
2 Follow steps 3–5 on page 26.
3 Press PROG.
* “PROG” and “P-01” will light up on the display, and all
track numbers on the selected disc will begin flashing.
4 If necessary, select the desired disc by pressing DISC
SKIP.
5 Select the desired track number by pressing the numeric
buttons.
6 Repeat steps 4 and 5 to program more selections for side A
of the tape. You can select the same track again.
* Pressing TIME displays the total remaining time on side
A of the tape for about 1 second, and then it is replaced
by the display of the next play order.
* If “TM OVER” appears on the display, the track number
just selected cannot be programmed because there is
not enough time remaining on side A of the tape.
However, at this time, if any other track number is
flashing continuously on the display, you can program it
instead of the unprogrammable one.
7 When the programming for side A is finished, press
R. TIME.
* “Side-B” appears on the display. You can begin
programming for side B.
* After following this step, you can check the programmed
contents for side A and side B alternately by pressing
R. TIME at any time before you press EDIT in step 9.
* The tape side indicator (
9) shows the programming
side currently selected.
8 Repeat steps 4 and 5 to program selections for side B of
the tape. You can select the same track again.
9 Press EDIT. (“EDIT” (8) lights up on the display.)
The recording starts.
1
1
3
4
5
7
9
Display information during programming
Notes on recording with the EDIT function
To check, cancel or correct program data, refer to page 14.
The maximum number of tracks that can be programmed is
20.
The track number 16 or higher cannot be programmed by
this function.
TIME
TIME
Selected disc
Side of the tape
Next play order
Programmed track numbers light up
and only programmable track numbers
among unprogrammed ones flash.
Selected track
number
Total remaining time on
this side of the tape
English
E-29
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
m To listen to or watch a source played on
an external unit connected with this
system
1 Select the input source (VIDEO, VCR or AUX/MD) you want
to play by using INPUT
or .
2 Play the source.
* If you play a video source, turn on the TV monitor
connected to this system.
3 Adjust the volume to the desired level by using VOLUME.
* If you prefer, you can control the sound quality by using
the built-in graphic equalizer (MUSIC), the sound field
processor (PROGRAM), BASS, TREBLE and/or
B. BOOST. (Refer to pages 30–33 for details.)
Operating the external units connected with this system
1, 11
3, 22
1, 11
3, 22
Use an external unit connected to the VCR, VIDEO or AUX/
MD terminals on the rear of the main unit.
m To record a source by using the tape
deck, VCR etc. connected to this system
If a tape deck, VCR, etc. is connected to this system, you can
record a source played on this system or an external audio/
video unit connected to this system by using the tape deck,
VCR, etc.
11 Select the source you want to record by using INPUT or
.
22 Play the source and then turn VOLUME up to confirm the
input source.
33 Begin recording on the tape deck, VCR, etc.
Note
A digital-to-digital recording is possible from a CD played on
the built-in CD player to an MD (or tape) on the MD recorder
(or DAT) by connecting the DIGITAL OUT (OPTICAL) terminal
on the rear of the main unit to the MD recorder (or DAT).
E-30
DISC
1
DISC
2
DISC
3
3
DISC CD CHANGER
STANDBY TIMER
DOWN UP
VOLUME
STANDBY/ON
AUTO REVERSE CASSETTE DECK
DOLBY B NR
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
PHONES
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
TREBLEBASS
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
MUSIC
B.BOOST
TREBLEBASS
100 350 1K 3.5K 10K
MUSIC
ROCK POPS
JAZZ
VOLUME
BASS BOOST
CD
PROGRAM
PRO LOGIC
HALL
3 STEREO YMERSION
3
12
54
Various sound control
1 Spectrum analyzer
The spectrum of the input source which is divided in five
bands will be indicated in real time.
2 BASS BOOST
3 VOLUME (volume level meter)
4 MUSIC (preset equalizer mode indicator)
5 PROGRAM (sound field program indicator)
General sound control
m VOLUME control
Front panel operation
Rotate VOLUME in the “UP” direction to increase the volume,
and the “DOWN” direction to decrease the volume.
Remote control operation
Press VOLUME + to increase the volume and VOLUME – to
decrease the volume.
* Adjusted volume level is shown by the volume level meter
(
3) and in figures on the display.
m B. (BASS) BOOST button
Press this button so that “BASS BOOST” (2) is illuminated
on the display to boost the bass frequency response of this
system while maintaining overall tonal balance. This function is
effective for reinforcing the bass frequencies when a
subwoofer is not used.
m BASS and TREBLE controls
BASS : Turn this knob clockwise to increase (or
counterclockwise to decrease) the low
frequency response.
TREBLE : Turn this knob clockwise to increase (or
counterclockwise to decrease) the high
frequency response.
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
BASS
BOOST
BASS
TREBLE
VOLUME
B. BOOST
VOLUME –
VOLUME +
E-31
English
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
DISC
1
DISC
2
DISC
3
3
DISC CD CHANGER
STANDBY TIMER
DOWN UP
VOLUME
STANDBY/ON
AUTO REVERSE CASSETTE DECK
DOLBY B NR
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
PHONES
MIN
PTY SELECT
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
TREBLEBASS
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
FREQ PS/PTY/RT/CT
RANDOM
MODE
PTY SEEK
START
REPEAT TIME
DISPLAYMODE
PHONESPHONES
Various sound control
m Listening with headphones
Be sure that your headphones have a 3.5 mm (1/8”)
diameter plug and between 16 ohms and 50 ohms
impedance. Recommended impedance is 32 ohms.
When you listen with headphones, connect the headphones
to the PHONES jack. You can listen to the sound that is
normally output from the front speakers through
headphones.
Adjust VOLUME to a comfortable listening level.
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
TIME PROG R
.
TIME EDIT
+
I0
MODE REPEAT
RANDOM
TUNER
DISC SKIP
TUNER
CD
INPUT
MUSIC
MUSIC
Graphic equalizer
The built-in graphic equalizer provides 3 preset equalizer
modes as listed below.
Preset graphic equalizer modes
Listening to the music with a preset equalizer effect
1 Play back a source.
2 Press MUSIC once or more so that the name of the desired
mode lights up on the preset equalizer mode indicator
(MUSIC) (4).
ROCK POPS
OFF
JAZZ
Mode
ROCK
POPS
JAZZ
Feature
High and low frequencies are emphasized.
This mode is suitable for reproducing
dynamic and powerful sounds of rock music,
etc.
Vocals are emphasized and whole sound is
clear. This mode is suitable for pops.
High frequencies for piano, sax, etc. are
emphasized. Medium frequencies for vocals
are also emphasized moderately.
E-32
Sound field processor
The Sound Field Processor built into this system enables you to enjoy listening to a source with an ambience of actual concert hall
or three-dimensional acoustics. This system provides preset sound field programs shown below. You can enjoy an excellent sound
field by selecting one of them, and adding desired adjustments.
This system also incorporates a Dolby Pro Logic Surround decoder for multi-channel sound reproduction of Dolby Surround encoded
video sources. The operation of the Dolby Pro Logic Surround decoder can be controlled by selecting a corresponding sound field
program.
Various sound control
m Sound field programs
This program is used for playing sources encoded with Dolby Surround.
Dolby Pro Logic Surround uses four discrete channels and five speakers to reproduce realistic and
dynamic sound effects: two main channels (left and right), a center channel for dialog, and a rear
channel for special sound effects. The rear channel reproduces sound within a narrow frequency range.
This program is used for simplified play of Dolby Surround encoded sources. With this program, sound
effects are output from the left and right front speakers and no sound from the rear speakers.
YMERSION is Yamaha’s proprietary technology that enhances the spread of a normal stereo source
play sound, creating three-dimensional acoustics using only two speakers.
This program presents you with an ambience of actual concert hall by adding effects as sonic reflections
or reberverations that create sound environment of a hall. Sound effects are output from the front and
rear speakers. Orchestra and opera music is suited for this sound field.
Program
PRO LOGIC
3 STEREO
YMERSION
HALL
Feature
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
E-33
English
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
Various sound control
m Listening to the music with a
sound field effect
1
Play a source.
2 Press PROGRAM once or more until the name of the
desired program is illuminated on the sound field program
indicator (
5).
* Whenever you press PROGRAM, the program changes
and is displayed as follows.
3 If desired, adjust the delay time and the output level of each
speaker. (For details, refer to the corresponding
descriptions on pages 33 to 34.)
Notes
When YMERSION is selected, no sound is heard from the
center speaker and rear speakers.
If you play a source not encoded with Dolby Surround when
PRO LOGIC is selected, the source may not be played
normally.
PROGRAM
PRO LOGIC
PROGRAM
3 STEREO
PROGRAM
YMERSION
PROGRAM
HALL
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
m Adjusting delay time and speaker
output level
DELAY TIME
You can adjust the time difference between the beginning of
the sound from the front speakers and the beginning of the
effect sound from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made PRO LOGIC and HALL
individually.
Control range
PRO LOGIC: 15, 20, 25, 30 milliseconds
HALL: 15, 20, 25, 30, 40, 50 milliseconds
1 Press CENTER/REAR/DELAY once or more until “DELAY”
appears on the display.
2 By continuously pressing LEVEL + or , the value changes
continuously.
(OFF)
PROGRAM
CENTER/
REAR/DELAY
LEVEL –/+
PROGRAM
Changes.
E-34
Various sound control
If desired, you can adjust the sound output level of the center
and/or rear speakers even if the output level is already set in
“Speaker balance adjustment” on page 10.
CENTER LEVEL
Control range : +10 to –21
1 Press CENTER/REAR/DELAY once or more until
“CENTER” appears on the display.
2 By continuously pressing LEVEL + or , the level value
changes continuously.
Notes
This adjustment can be made only when the sound field
program
PRO LOGIC or 3 STEREO is selected.
Once the output level is adjusted, the level value will be the
same in the
PRO LOGIC and 3 STEREO programs.
REAR LEVEL
Control range : +10 to –21
1 Press CENTER/REAR/DELAY once or more until “REAR”
appears on the display.
2 By continuously pressing LEVEL + or , the level value
changes continuously.
Notes
This adjustment can be made only when a sound field
program
PRO LOGIC or HALL is selected.
Adjustment can be made to PRO LOGIC and HALL
individually.
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
CENTER/
REAR/DELAY
LEVEL –/+
Changes.
Changes.
E-35
English
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
Using the built-in timer
Timer play
By using the built-in timer, you can set the time when this
system turns on and a source play begins, and the time when
this system will be set to the standby mode automatically.
1 Press DISPLAY.
Whenever DISPLAY is pressed, the display mode changes
as follows.
Note
The display mode will change in about 8 seconds. If the
mode is changed before the setting is completed, call the
mode again by pressing DISPLAY once or more.
1 Current time
Make sure that the current time is correct, and press
TIMER so that “TIMER” lights up on the display.
2 Source selecting mode
Select the source to be played with INPUT
or .
3 ON TIME/time setting mode
[“ON TIME” appears on the display, and soon it is
changed to a time setting mode.]
Set the time when you want to begin the timer play.
Press HOUR and set the hour.
Press MIN and set the minute.
4 OFF TIME/time setting mode
If necessary, set the time when you want to finish the
timer play in the same way as you did in step
3. If you
do not set the time, it will be automatically set so that the
timer play finishes after 1 hour.
2 Press TIMER to complete the timer play setting.
This system turns into the standby mode.
* The STANDBY and TIMER indicators light up.
If you will continue using this system, press STANDBY/ON
to turn on this system.
To cancel the timer play setting
Press DISPLAY, and then press TIMER so that the TIMER
indicator goes out.
Note
Unless there is a power failure for more than 5 minutes, the
set time will be retained until it is reset.
STANDBY/ON
POWER
1 Current time (TIMER on/off mode)
2 Source selecting mode (TAPE, TUNER, CD)
3 ON TIME/Time setting mode
4 OFF TIME/Time setting mode
5 Normal display mode
MIN
DISPLAY
INPUT
TIMER
HOUR
INPUT
E-36
DISC
1
DISC
2
DISC
3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM
B.BOOST
MUSIC
INPUTINPUT
MIN
PRESET
/
TUNING
/
BAND A
/
B
/
C
/
D
/
E
DISC CHANGE OPEN
/
CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSEDOLBY NR
HOUR
RANDOM
REPEAT TIME
DISPLAYMODE
This system will be set to the standby mode automatically
when the selected sleep time passes.
1 Play the desired sound source.
2 Press SLEEP repeatedly until the desired sleep time
appears on the display. The display will change as
described below.
* The normal display mode will resume about 4 seconds
after the selection is made.
* “SLEEP” will light up on the display.
2h00m
1h30m 1h00m 0h30m
OFF SLEEP
(Sleep timer is off.)
Sleep timer operation
Using the built-in timer
1 Follow steps 2–3 of “Basic recording” on page 24.
2 Tune in to the station you want to record.
3 Follow step 1 of “Timer play” on page 35.
* In step 2, select “TUNER”, and then press REC/
PAUSE. (“REC
>TAPE” and the frequency will flash
alternately on the display.)
* In step 3, set the time when you want to begin
recording.
* In step 4, set the time when you want to finish
recording.
4 Press TIMER.
This system will be set to the standby mode.
* The STANDBY and TIMER indicators light up.
To cancel the setting of timer recording
Press DISPLAY once or more so that “REC >TAPE” flashes
on the display. While “REC
>TAPE” is flashing, press REC/
PAUSE.
Note
When the timer recording is finished, the timer setting is
automatically canceled.
3
DISPLAY
Timer recording
PROGRAM
BASS
BOOST
MUSIC
CENTER/
REAR/DELAY
TEST
LEVEL
VOLUME
POWER
SLEEP
/I
REC/PAUSE
DIRECTION
TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+
I0
E
MODE REPEAT
RANDOM
TUNER
DISC SKIP
AB
TUNER
CD
INPUT
3
3
4
3
STANDBY/ON
POWER
SLEEP
English
E-37
Appendix
Refer to the chart below when this system does not function properly. If the problem you are experiencing is not listed below or if the
instruction below does not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center.
Troubleshooting
General
Problem
This system does not work normally.
The sound suddenly goes off.
No sound from speakers.
No sound from the rear speakers.
No sound from the center speaker.
No sound (or no picture) from the external
unit connected with this system.
Timer cannot be set.
This system will not operate properly.
The volume level cannot be increased, or
sound is distorted.
A picture of the TV is disturbed.
Excessive static in FM broadcasts.
Noise increases during stereo broadcasts.
Stereo broadcasts are noisy and STEREO
indicator blinks on and off.
Preset stations cannot be selected.
Buzzing or static during AM broadcasts.
AM broadcast sensitivity is poor.
Cause
There is an influence of strong external
noise (lightning, excessive static
electricity, etc.) or the system was
operated incorrectly.
The protection circuit was activated
because of a short circuit, etc.
The SLEEP timer was activated.
Speaker connections are not secure.
The sound output level to the rear
speakers is set to minimum.
Incorrect sound field program selection.
No sound field program is selected.
The sound output level to the center
speaker is set to minimum.
Incorrect sound field program selection.
No sound field program is selected.
Incorrect cord connections.
Input source selection is not correct.
Current time is not set.
The internal microcomputer has been
frozen by an external electric shock
(lightning, excessive static electricity, etc.)
or power supply with low voltage.
The component connected to the AUX/MD
OUT or VCR OUT terminals on the rear of
the main unit is turned off.
There is an influence of magnet in the
center speaker.
Interference from starting motor of nearby
car.
Interference from thermostat of nearby
electrical appliance.
Antenna input is too weak due to
obstructions or excessive distance from
broadcasting station.
Insufficient antenna input.
Preset memory has been erased.
Interference from source such as
lightning, fluorescent lights, electric
motors or thermostat of nearby electrical
appliance.
TV or microprocessor is being used
nearby.
Radio signal is weak or antenna is not
properly connected.
What to Do
Set this system to the standby mode and
disconnect the AC power cord from the AC outlet.
After about 30 seconds pass, connect the power
and operate this system again.
Set this system to the standby mode, then turn
on to reset the protection circuit.
Cancel the SLEEP timer function.
Secure the connections.
Raise the sound output level to the rear
speakers.
Select the appropriate program.
Raise the sound output level to the center
speaker.
Select the appropriate program.
Connect the cords properly. If the problem
persists, the cords may be defective.
Make a correct input source selection.
Set current time.
Unplug the AC supply lead from the wall AC
outlet, then plug in again after about one minute.
Turn on the power to the component.
Place the center speaker apart from the TV.
Position the FM antenna as high and as far away
from nearby roads as possible. Use coaxial cable.
Check antenna connections.
Install a multi-element type FM antenna if possible.
Install an antenna appropriate for the electric field
strength of your area.
Reprogram memory presettings.
Problem is difficult to eliminate but can be
lessened by grounding AM loop antenna.
Move away from TV or microprocessor.
Properly connect AM loop antenna.
Change orientation of AM loop antenna.
Install an external AM antenna.
Tuner
E-38
Appendix
CD player
Problem
A disc cannot be played back normally, or
there is a noise during play.
Play will not begin even if disc is loaded.
No sound.
Sound stops suddenly (always at the
same spot).
Tape will not move during playback or
recording.
Recording is not possible.
Sound is distorted or fades out, or stereo
balance is poor.
Poor sound quality.
Excessive noise.
Tape travel stops in middle of playback or
recording.
The beginning of desired selections on
tape cannot be found.
Remote control does not work.
TV functions strangely when the remote
control is used.
Cause
The disc is not a standard type.
Disc is upside down.
Disc is dirty.
The input source selection is incorrect.
Disc is dirty.
Volume is set too high.
Slack tape wrapped around pinch roller.
Erasure prevention tab is broken off.
Head is dirty.
Head is dirty.
Tape is worn.
Tape encoded with Dolby NR is played
back with this system’s Dolby NR off.
Tape not encoded with Dolby NR is played
back with this system’s Dolby NR on.
Head has become magnetized.
Slack tape coming out of cassette shell.
Tape is creased or torn.
Endless tape is being used.
Silent gaps between selections are too
short.
Excessively soft passages in middle of
selections.
Conversation, etc. is recorded.
Batteries are dead.
Remote control is too far away or tilted too
much.
Direct sunlight or lighting (of an inverter
type of fluorescent lamp, etc.) is striking
the remote control sensor of the main unit.
Remote control is being used near TV set
with a remote control sensor.
What to Do
Play another disc.
Load disc label side facing up.
Clean disc.
Select the CD player by pressing INPUT
or button until “CD” is illuminated on the
display.
Clean disc.
Lower volume.
Take up slack with a pencil before using.
Replace tape or cover erasure prevention hole
with cellophane tape.
Clean heads.
Clean heads.
Replace tape.
Press the DOLBY NR button to turn it on.
Press the DOLBY NR button to turn it off.
Demagnetize heads with head eraser.
Take up slack by turning reels with a pencil.
Replace with new tape.
Do not use endless tapes.
The function of searching for the beginning of
desired selections will not operate unless the
silent gaps between selections are at least four
seconds long.
Replace batteries.
Use within 6 m and 60° radius.
Change position of the main unit.
Relocate the main unit away from the TV or cover
TV’s remote control sensor.
Remote control
Tape deck
E-39
English
Appendix
Specifications
n Amplifier section
Minimum RMS Output Power per Channel
FRONT
6 ohm, 1 kHz, 0.9% THD..................................... 80W+80W
6 ohm, 1 kHz, 10% THD.................................. 100W+100W
CENTER
6 ohm, 1 kHz, 0.9% THD.............................................. 80W
6 ohm, 1 kHz, 10% THD............................................. 100W
REAR
6 ohm, 1 kHz, 0.9% THD.............................................. 25W
6 ohm, 1 kHz, 10% THD............................................... 30W
Input Sensitivity/Impedance
AUX/MD ..................................................... 200 mV/47 k-ohm
Spectrum Analyzer Band........................................... 5 bands
(100 Hz, 350 Hz, 1 kHz, 3.5 kHz, 10 kHz)
n Video section
Video Signal Level .......................................... 1 Vp-p/75 ohm
n Tuner section
Tuning Range
FM
[U.S.A. and Canada models] .................. 87.5 to 107.9 MHz
[Australia, China and General models]
................................................................ 87.5 to 108.0 MHz
AM
[U.S.A. and Canada models] .....................530 to 1,710 kHz
[Australia model] ........................................531 to 1,611 kHz
[China and General models]
..................................................530/531 to 1,710/1,611 kHz
Usable Sensitivity (FM)
75 ohm, DIN, Mono, S/N 26 dB .................................. 1.8 µV
S/N 30 dB, 1 kHz, 100% Mod...................................... 1.5 µV
n CD player section
Type ............................................3 disc carousel auto-changer
D/A Converter ...........................................................1-bit DAC
Filter ...................................... 8-time oversampling digital filter
n Tape deck section
Type ....................................Auto reverse stereo cassette deck
Frequency Response (–20 dB)
Type 1 (Normal) ........................................... 50 to 15,000 Hz
Type 2 (High) ............................................... 50 to 16,000 Hz
Wow and Flutter ..............................................0.09%, W.RMS
Signal-to-Noise Ratio..........................58 dB (Dolby NR OFF)
66 dB (Dolby B NR ON)
Harmonic Distortion .......................................................0.8%
n Speaker section
Type (Magnetic shielding type)
Front speaker .............. 3-way bass reflex: 13 cm (5”) woofer
5 cm (2”) tweeter
2 cm (3/4”) super tweeter
Center speaker .................................. 8 (3”) cm full range x 2
Rear speaker ...........................................8 (3”) cm full range
Maximum input
Front, Center, Rear .................................. 240W, 170W, 40W
Impedance
Front, Center ............................................................... 6 ohm
Rear ............................................................................12 ohm
n General
Power Supply
[U.S.A. and Canada models]..........................AC 120V, 60 Hz
[Australia model] ............................................AC 240V, 50 Hz
[China and General models]
.............................................AC 110/120/220/240V, 50/60 Hz
Power consumption ...................................................... 170W
Dimensions (W x H x D)
Main unit ............................................... 280 x 320 x 364 mm
(11” x 12-5/8” x 14-5/16”)
Front Speaker....................................... 200 x 320 x 218 mm
(7-7/8” x 12-5/8” x 8-9/16”)
Center Speaker .................................... 280 x 113 x 177 mm
(11” x 4-7/16” x 6-15/16”)
Rear Speaker.......................................... 94 x 117 x 108 mm
(3-11/16” x 4-5/8” x 4-1/4”)
Weight
Main unit ..............................................10.5 kg (23 lbs. 2 oz.)
Front Speaker...................................3.8 kg ( 8 lbs. 6 oz.) x 2
Center Speaker .......................................2.0 kg (4 lbs. 6 oz.)
Rear Speaker....................................0.7 kg ( 1 lbs. 9 oz.) x 2
Accessories .................................................... Remote control
Batteries
Speaker cords
AM loop antenna
Indoor FM antenna
Mounting brackets
Screws
Pads
Specifications are subject to change without notice.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
@
Printed in Malaysia
V380800
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50

Yamaha GX-700 Manual de usuario

Categoría
Reproductores de CD
Tipo
Manual de usuario
Este manual también es adecuado para