Panasonic CT34WX53 Instrucciones de operación

Panasonic
Marca
Panasonic
Modelo
CT34WX53
Categoría
Equipo de música suplementario
Tipo
Instrucciones de operación
Wide Screen TV
HDTV Monitor
Operating Instructions
Model No.
English
TQBC0611
A
C
T
I
O
N
123
456
78
0
9
TV
DTV
C
BL
AUX
D
V
D
V
C
R
DBS
R
CVR
POWER
CH
CH
VOL VOL
PLAY
R-TUNE PROG
GUIDE
RECALL
SAP
PAGEEXIT
PIP SPLIT MOVE SWAP
STOPPAUSE
REC
PIP MAX
FF
PIP MIN
REW
BBE
MENU
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
CT-34WX53
For assistance, please call : 1-888-VIEW-PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
2
WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to
qualified service personnel.
2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin
grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety fea-
ture. If you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with
arrow-head within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.
The exclamation point within
a triangle is intended to tell
the user that important
operating and servicing
instructions are in the papers
with the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258 and 4482866.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
3
1) Read these instructions.
All the safety and operating instructions should be read before the appliance is operated.
2) Keep these instructions.
The safety and operating instructions should be retained for future reference.
3) Heed all warnings.
All warnings on the appliance and in the operating instructions should be adhered to.
4) Follow all instructions.
All operating and use instructions should be followed.
5) Do not use this apparatus near water.
For example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and
the like.
6) Clean only with dry cloth.
Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Slots and Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been adhered to.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid
injury from tip-over.
Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination
to overturn.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
This will prevent damage to the product due to lightning and power-line surges.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Important Safety Instructions
CAUTION : This TV set is intended to be used with the following TV stand: model TY-S34WX53 for the CT-34WX53.
Use with other stands may result in the TV set becoming unstable, possibly causing injury.
4
Dear Panasonic Customer
FCC CAUTION:
Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this TV not expressly approved by
Matsushita Electric Corporation of America could result in harmful interference and would void the user’s authority to
operate this device.
Note:
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these
materials may be regulated in your community due to environmental considerations. For disposal or recycling information
please contact your local authorities, or the Electronics Industries Alliance: <http:// www.eiae.org.>
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment
from your new color television set.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments,
and retain them for future reference.
Retain your purchase receipt also, and record the model number and serial number of your set in the
space provided on the back cover of these instructions.
Visit our Panasonic Web Site for USA : www.panasonic.com
for Puerto Rico : www.panasonic.com
for Canada : www.panasonic.ca
For assistance, please call : 1-888-VIEW-PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment
does cause or receive interference, which can be determined by turning equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
Reorient or relocate the TV antenna.
Increase the separation between TV and other equipment.
Connect TV into separate outlet from other equipment.
Consult the dealer or an experienced radio/TV technician for help.
Federal Communication Commission Information
5
SURROUND ............................................................... 28
SPEAKERS ................................................................. 28
CHANNELS Adjustment .............................................. 29
CHANNEL SCAN ........................................................ 29
FAVORITE CHANNELS Selection .............................. 29
Selecting option menus in OTHER ADJ. ..................... 30
PRESET CAPTION ..................................................... 30
MANUAL CAPTION .................................................... 31
INPUT LABEL ............................................................. 31
TIMER ............................................................................ 32
SLEEP ........................................................................ 32
TIMER1 and TIMER2 .................................................. 32
CLOCK SET ................................................................ 34
LOCK Feature ............................................................... 35
CREATE CODE FIRST ............................................... 35
CODE .......................................................................... 35
LOCK SET ...................................................................35
CHANNEL ................................................................... 36
V-CHIP SET ................................................................ 36
U.S. TV PROGRAMS.................................................. 37
U.S. MOVIES .............................................................. 38
Canadian English ........................................................ 39
Canadian French ........................................................ 40
Blocking Message ....................................................... 41
HOW LONG? .............................................................. 41
Picture in Picture Operation........................................ 42
Split Screen ...................................................................44
ASPECT Controls ......................................................... 46
Operating peripheral equipment using the remote control .....
47
Programming The Illuminated Remote Control
Using Access Codes ........................................ 47
Programming Without A Code
(When the code is not known) ......................... 48
Infrared Codes Index .................................................. 49
Mode Operational Key Chart ...................................... 52
Troubleshooting Chart................................................. 62
Cleaning ........................................................................ 62
Specifications ............................................................... 63
Table of Contents
Important Safety Instructions ....................................... 3
Table of Contents ........................................................... 5
Installation ...................................................................... 6
Receiver Location ......................................................... 6
Optional External Equipment ........................................ 6
AC Power Supply Cord ................................................. 6
Safety Precaution .......................................................... 6
Remote Control Battery Installation .............................. 6
Cable Connection........................................................... 7
Connecting the Aerial cable to the RF In Terminal ........ 7
Antenna Connection ............................................. 7
Connecting Headphones / Earphones .......................... 7
Front Control Panel ....................................................... 8
Optional Equipment Connections ................................. 8
Cable Box Connection .......................................... 8
VCR Connection ................................................... 9
VCR and Cable Box Connection ......................... 10
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
... 11
Amplifier Connection (TO AUDIO AMP)................ 11
Program Out Connection (PROG OUT) .............. 12
How to connect the DIGITAL IN Terminals .................. 12
Connecting a DTV Decoder to DIGITAL IN .......... 12
Power ON / OFF ............................................................ 13
Connecting the Plug to the Wall Outlet ....................... 13
How to Turn the Power On.......................................... 13
Menu Language Selection .......................................... 13
VHF, UHF and Cable TV ............................................... 14
VHF and UHF ............................................................. 14
Cable TV ..................................................................... 15
Location of Controls .................................................... 16
Illuminated Remote Control ........................................ 16
Basic Menu Operations ............................................... 18
SET UP Operation ........................................................ 20
MENU Languages ....................................................... 20
ANTENNA Selection ................................................... 20
cc
ON MUTE
cc
MODE (Closed Captions) ............ 20
Selecting option menus in OTHER ADJ...................... 21
MODE Selection ......................................................... 22
AUTO PROGRAM....................................................... 22
MANUAL PROGRAM.................................................. 22
AUTO POWER ON ..................................................... 23
CHAN BANNER .......................................................... 23
Geomagnetic correction (Adjusting skewing of images) ....
23
IMAGE SHIFT ............................................................. 24
PICTURE Adjustment ................................................... 24
PICTURE MODE ........................................................ 24
COLOR / TINT / BRIGHTNESS / PICTURE /
SHARPNESS / NORMAL ............................... 24
Selecting option menus in OTHER ADJ...................... 25
COLOR TEMP (Temperature) / NATURAL COLOR /
VIDEO NR / 3D Y/C FILTER ............................ 25
COLOR MATRIX ......................................................... 25
VM (Velocity Modulation) ............................................ 26
FREEZE ...................................................................... 26
Audio Adjustment ........................................................ 27
Selecting STEREO/SAP/MONO ................................. 27
Selecting BASS / TREBLE / BALANCE / NORMAL.... 27
Selecting option menus in OTHER ADJ...................... 27
AI SOUND ................................................................... 27
BBE VIVA / BBE .......................................................... 28
Instalación de las pilas en el control remoto ........ 54
Conexión del cable de la antena al terminal de
entrada de RF .............................................. 54
Conexión/desconexión de la alimentación ........... 55
Conexión del enchufe a un tomacorriente ................ 55
Cómo conectar la alimentación................................. 55
Selección del idioma del menú ................................. 55
VHF, UHF y CATV ..................................................... 56
VHF y UHF ................................................................ 56
Televisión por cable .................................................. 56
Operaciones básicas con menús ........................... 57
PREPARACIÓN......................................................... 59
Selección de MODO ................................................. 59
PROGRAMA AUTOMÁTICO..................................... 59
PROGRAMA MANUAL ............................................. 59
Ubicación de los controles ..................................... 60
Control remoto iluminado .......................................... 60
Manual de instrucciones [Resumeu]
6
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that
will damage the remote control transmitter.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new
batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn
used batteries.
5. Battery replacement is necessary when remote control acts
sporadically or stops operating the TV set.
Requires two AA batteries.
1. Turn the Transmitter face down.
Remove top cover by pressing
down on marking and sliding cover
off in the direction indicated.
2. Install the batteries as shown in
the battery compartment. (Polarity
+ or – must match the markings in
the compartment).
3. Replace the cover and slide in
reverse until the lock snaps.
Two AA size
For frequent remote control users, replace old
batteries with alkaline batteries for longer life.
Helpful Hints:
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,
video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you will need.
Installation
Receiver Location
This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for
comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
To ensure optimum color purity do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.
Optional External Equipment
AC Power Supply Cord
CAUTION: To prevent electric shock, match wide blade of plug to wide slot of AC outlet and fully insert. Do not use this
(polarized) plug with a receptacle or other outlet unless the blade can be fully inserted to prevent blade exposure.
Please take safety precautions to
prevent the unit from falling over.
The unit may fall over during
earthquakes, or if someone stands on
or shakes the TV.
Safety Precaution
Fixing to a wall
Use a strong rope or a chain (not included)
to fasten the TV firmly to a strong support
such as a wall or pillar.
Whenever you remove the batteries, you may
need to reset the remote control infrared
codes. We recommend that you record the code
on page 49, prior to setting up the remote control.
Helpful Hints:
Remote Control Battery Installation
7
Cable Connection
Connecting the Aerial cable to the RF In Terminal
DIGITAL
IN
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
P
B
P
R
Y
VIDEO
AUDIO
R
L
TO AUDIO
AMP
R
L
12
123
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
Notes:
(1) To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating
plug are required.
(2) If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial
socket and your television receiver.
(3) Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your
particular area and the accessories required.
(4) Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred,
are the responsibility of you, the Customer.
Note: Certain cable systems offset some channels to
reduce interference or have Premium
(scrambled) channels. A cable converter box is
required for proper reception. Check with your
local Cable company for its compatibility
requirements.
Incoming Cable from
Home Antenna
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is
recommended. Antenna Mode must be set to TV.
• Incoming Cable from Home Antenna
Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the SET UP menu.
( Cable Mode is preset at the factory. Antenna users must change to TV mode and select ANT1 in the Set Up Menu.)
Antenna Connection
VHF Aerial
UHF Aerial
Mixer
75 Ohm
Coaxial Cable
S-VIDEO VIDEO
L
-
AUDIO
-
R
INPUT 4
ACTION
TV/VIDEO
VOLUME
HPJ
CHANNEL
Connect headphones / earphones as follows.
You can listen to sound from the headphone Jack.
(M3 plug)
(Optional)
Connecting Headphones / Earphones
8
Follow this diagram when connecting your television to a cable box only.
Optional Equipment Connections
Note: The remote control must be programmed with supplied codes to operate the cable box (see page 51).
Procedure
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or Channel 4.
3. Using the cable box, tune to the premium cable channel you would like to view.
Note:
To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu
(see page 20).
Viewing a premium (scrambled) cable channel
Cable Box Connection
ANT INPUT
ANT OUTPUT
DIGITAL
IN
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
P
B
P
R
Y
VIDEO
AUDIO
R
L
TO AUDIO
AMP
R
L
12
123
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
CABLE BOX
Incoming Cable
CONNECTIONS ON BACK OF TV
CABLES NOT
SUPPLIED
Push to open the front panel of the television to use the TV without remote control or to use the Audio/Video input jacks for
optional equipment.
Note:
The S-VIDEO connection provides higher quality picture. It overrides other VIDEO connections. Use INPUT 4, AUDIO L
and R with S-VIDEO connection.
A second VCR, video disc player, video game equipment and DSS equipment can also be connected to the video inputs.
See the optional equipment manual for details.
Front Control Panel
Press
TV/VIDEO
to select VIDEO 4 input mode.
1. Connect equipment to front Audio/Video input jacks.
2. Operate optional equipment as instructed in equipment manual.
Procedure
Note:
The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
S-VIDEO VIDEO
L
-
AUDIO
-
R
INPUT 4
ACTION
TV/VIDEO
VOLUME
HPJ
CHANNEL
CAMCORDER
Cable Connection
9
Cable Connection
Follow this diagram when connecting your television to a VCR only.
Note: The remote control must be programmed with supplied codes to operate the VCR (see page 49, 50).
VCR Connection
Procedure
1. Select ANT1 in the SET UP menu.
2. Tune the television to the television program you would like to view.
Viewing a television program
Procedure
• Option A
1.
Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
2. Begin the video.
• Option B
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Viewing a video
Procedure
• Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
• Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu.
2.
Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the program you would like to view.
Recording a television program
S-VIDEO
VIDEO
ANT INPUT
ANT OUTPUT
AUDIO
R
L
DIGITAL
IN
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
PB
PR
Y
VIDEO
AUDIO
R
L
TO AUDIO
AMP
R
L
12
123
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
CONNECTIONS ON BACK OF TV
Incoming Cable
CABLES NOT SUPPLIED
VCR
Use either the S-Video or the
Video connection.
10
Cable Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
Notes:
(1) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals.
Input 4 is located on the front of the unit.
Select the desired VIDEO input position by pressing the TV/VIDEO button. (See page 17)
(2) When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video
input terminal are connected at the same time.
Note: To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP
menu (see page 20).
Note: The remote control must be programmed with supplied codes to operate the VCR and cable box
(see page 49 - 51).
Note: To view a different channel while recording:
• Select ANT1 in the SET UP menu.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a program (except another premium cable channel).
Procedure
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or Channel 4.
3. Using the cable box, tune to the premium cable channel you would like to view.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected
to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium cable channel you would like to record.
6. Begin recording.
Recording a premium (scrambled) cable channel
VCR and Cable Box Connection
S-VIDEO
VIDEO
ANT INPUT
ANT OUTPUT
ANT INPUTANT OUTPUT
DIGITAL
IN
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
P
B
P
R
Y
VIDEO
AUDIO
R
L
TO AUDIO
AMP
R
L
12
123
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
AUDIO
R
L
Use either the S-Video or the Video connection.
Incoming Cable
VCR
CABLE BOX
CONNECTIONS ON BACK OF TV
CABLES NOT SUPPLIED
11
DIGITAL
IN
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
P
B
P
R
Y
VIDEO
AUDIO
R
L
TO AUDIO
AMP
R
L
12
123
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
Cable Connection
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected to the component video inputs (Y, PB , PR ) of the television.
A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV.
Note:
There are 2 sets of three video inputs, Y, PB , and PR . Separate component color inputs provide luminance and color
separation. Use the L (left) and R (right) audio inputs.
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP inputs on back of television.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.
CABLES NOT SUPPLIED
DIGITAL TV OUTPUT
MAIN
VIDEO
AUDIO OUTPUT
P
B
P
R
Y
R
L
DIGITAL
IN
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
P
B
P
R
Y
VIDEO
AUDIO
R
L
TO AUDIO
AMP
R
L
12
123
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
DTV INPUT TERMINALS ON BACK OF TV
CABLES NOT SUPPLIED
CONNECTIONS ON BACK OF TV
External Amplifier
Procedure
1. Select SPEAKERS ON located in the onscreen AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust television volume to desired level.
4. Adjust amplifier volume to match the television.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.
6. Volume,mute,bass,treble and balance are now controlled through the television.
Audio Adjustments
12
Cable Connection
Program Out Connection (PROG OUT)
To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections
on the back of the television.
See optional equipment manual for further instructions for recording and monitoring.
DIGITAL IN
COMPONENT VIDEO INPUT
INPUT
P
B
P
R
Y
VIDEO
AUDIO
R
L
R
L
12
123
VIDEO
ANT1
ANT2
SPLIT
OUT
DIGITAL
IN
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
P
B
P
R
Y
VIDEO
AUDIO
R
L
R
L
12
123
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
TO AUDIO
AMP
TO AUDIO
AMP
CONNECTIONS ON BACK OF TV
VCR
OR
MONITOR
Procedure
1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals.
2. PROG OUT terminal display is the same as onscreen display.
How to connect the DIGITAL IN Terminals
When connecting a Digital Set -Top -Box to DIGITAL-IN, be sure not to select “SKIP” from the INPUT LABEL menu.
Failing to do so may result in a distorted display or black out (refer to page 31).
Connecting a Digital Set -Top - Box to DIGITAL IN
DIGITAL
IN
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
P
B
P
R
Y
VIDEO
AUDIO
R
L
TO AUDIO
AMP
R
L
1 2
12
3
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
DIGITAL IN cable
(Not supplied)
Digital Set-Top-Box
Audio
DIGITAL IN terminals
2 × RCA plug
By inputting a High-bandwidth Digital Content Protection
(
HDCP
)
high-definition picture source to the DIGITAL IN terminal
of this television, high-definition pictures can be displayed on the screen in their digital form.
(
This DVI input terminal is
compliant with the EIA-861 standard and is not intended for use with personal computers.
)
Note:
The DIGITAL IN terminal can only be used with 1080i, 480p or 480i picture signals. Set the Digital Set -Top -Box DIGITAL OUT
terminal Output setting to 1080i, 480p or 480i. For detailed information, refer to the Digital Set -Top -Box instruction manual. If
you cannot display the picture because your Digital Set -Top -Box does not have a DIGITAL OUT terminal Output setting, use
the component Video Input (or the S Video Input or Video Input). In this case the picture will be displayed as an analog signal.
( DVI Input terminal )
13
Power ON / OFF
Connecting the Plug to the Wall Outlet
Note:
The TV’s power cord must first be plugged into the wall
outlet and then turned on at the POWER switch (standby
mode).
Press the POWER switch on the TV to turn the set on.
POWER-ON: Red
When the set is on press the POWER switch on the TV
to turn the set off.
STANDBY: No light
Example: The screen below is displayed for a while after
the TV is turned on. (setting condition is an
example.)
Press the POWER button on the remote control to turn
the TV on: Red
Press the POWER button on the remote control to turn
the TV off: No light (standby)
How to Turn the Power On
Remote Control Sensor
CH 3
SAP
JUST
VIVID
A
C
T
I
O
N
TV
DTV
CBL
AUX
DVD
VCR
DBS
RCVR
CH
CH
VOL VOL
RECALL
SAP
BBE
MENU
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
POWER
POWER
Menu Language Selection
In SET UP Menu, Select IDIOMA/LANGUE to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS
(French). (refer to page 20)
Note:
The TV will still consume some power as long as the power cord is still inserted
into the wall outlet.
14
VHF, UHF and Cable TV
Press to turn the TV on (See page 13).
Press
TV
to operate the TV set with the remote
control.
Press to select the desired channel.
Select the desired volume level.
Notes:
(1) The channel number and volume level remain the same even after
the TV is turned off.
(2) Power consumption and howling of sound can be reduced if the
volume level is lowered.
POWER
1
2
3
123
456
78
0
9
DTV
AUX
DVD
VCR
DBS
RCVR
RECALL
BBE
MENU
PLAY
R-TUNE PROG
GUIDE
SAP
PAGEEXIT
PIP SPLIT MOVE SWAP
STOPPAUSE
REC
PIP MAX
FF
PIP MIN
REW
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
POWER
CBL
CH
CH
VOL VOL
A
C
T
I
O
N
TV
TV
A
C
T
I
O
N
CH
CH
VOL VOL
A
C
T
I
O
N
CH
CH
VOL VOL
4
VHF and UHF
S-VIDEOVIDEO
L
-
AUDIO
-
R
INPUT 4
ACTION
TV/VIDEO
VOLUME
HPJ
CHANNEL
S-VIDEO VIDEO
L
-
AUDIO
-
R
INPUT 4
ACTION
TV/VIDEO
VOLUME
HPJ
CHANNEL
Power switch
Remote control sensor
Operation can be done
from the TV set.
•
Channel selectors
•
Volume adjusters
15
A
C
T
I
O
N
123
456
78
0
9
TV
DTV
AUX
DVD
VCR
DBS
RCVR
CH
CH
VOL VOL
PLAY
R-TUNE PROG
GUIDE
RECALL
SAP
PAGEEXIT
PIP SPLIT MOVE SWAP
STOPPAUSE
REC
PIP MAX
FF
PIP MIN
REW
BBE
MENU
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
POWER
CBL
Confirming
Confirm that registration with cable TV provider and connection of
equipment are completed. Turn the CABLE BOX on and select the
desired volume level.
Press while pointing the remote control towards
the CABLE BOX.
Note:
The remote control code number is set for
Panasonic products.
When peripheral equipment does not operate,
reset code (See page 47 - 48).
Operate the CABLE BOX and select the desired volume level.
POWER
CBL
1
2
3
Press
CBL
to confirm.
INPUT
OUTPUT
S-VIDEOVIDEO
L
-
AUDIO
-
R
INPUT 4
ACTION
TV/VIDEO
VOLUME
HPJ
CHANNEL
ANTENNA TERMINAL ON
THE BACK OF THE TV
CABLE BOX
To Antenna
Input
Incoming Cable from Antenna
or Cable TV System.
Cable TV
When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4.
This does not apply when signal is input from VIDEO INPUT.
VHF, UHF and Cable TV
16
Illuminated Remote Control
Location of Controls
Power button
Press to turn the TV ON or OFF (See page 13).
Note: The TV’s power cord must first be plugged into the wall outlet
and then turned on at the POWER switch (standby mode).
R-TUNE button
Switches to previously viewed channel or video mode.
MUTE button
Press this button to mute the sound, press again to cancel the mute.
Operation of other Device
TV
DTV
CBL
AUX
DVD
VCR
DBS
RCVR
Mode Selection buttons
Selects the operation mode for the remote control. (See page 48)
VCR Mode Selection for Remote Control
Digital Video Disk Mode Selection for Remote Control
Aux Mode Selection for Remote Control
TV Mode Selection for Remote Control
Digital Broadcasting Satellite for
Remote Control
Receiver/Amplifier Mode Selection
for Remote Control
Digital TV Mode Selection for Remote Control
Cable TV Mode Selection for Remote Control
PIP or SPLIT FREEZE
TV/VCR Switch
TV/DBS Switch
-
-
PIP or SPLIT CH up/down
VCR CH up/down
TV/DBS CH up/down
-
-
PIP Search
-
-
OPEN/CLOSE
-
TV
VCR
CABLE/DBS
DVD/LD/CD
RCVR
TV
VCR
CABLE/DBS
DVD/LD/CD
RCVR
PIP Minimize/Maximize
VCR REW/FF
-
Skip Search REW/FF
Surround
-
/+
-
PLAY
-
PLAY
-
-
VCR RECORD
DBS RECORD
-
-
-
Pause
-
Pause
-
-
STOP
-
STOP
-
ButtonsButtons
Device
PIP MAX
FF
STOP
PIP MIN
REW
PLAY
PAUSE
ButtonsButtons
Device
SEARCH
OPEN/CLOSE
REC
FREEZE
TV/VCR
PIP CH
VCR CH
ASPECT button
Change of screen size (See page 46).
R-TUNE
ZOOM FULL JUST
4 : 3
17
A
C
T
I
O
N
123
456
78
0
9
TV
DTV
CBL
AUX
DVD
VCR
DBS
RCVR
POWER
CH
CH
VOL VOL
PLAY
R-TUNE PROG
GUIDE
RECALL
SAP
PAGEEXIT
PIP SPLIT MOVE SWAP
STOPPAUSE
REC
PIP MAX
FF
PIP MIN
REW
BBE
MENU
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
A
C
T
I
O
N
CH
CH
VOL VOL
RECALL
BBE
MENU
GUIDEPAGEEXIT
Direct program number
selection buttons
Lights the remote control buttons.
The selected button blinks when lit.
Returns to normal viewing from the MENU screen.
Previous item in MENU.
TV/VIDEO button
The input mode changes each time this button is pressed.
GUIDE button
for DBS.
Location of Controls
SAP button
Selects Audio mode (See page 27).
Page up/down for DBS,
skip +/- for DVD & CD.
Swap pictures in Split Screen and Picture in Picture operation
(See page 42, 45).
PROG dash button
Program dash channel numbers for DTV and DBS.
PROG
Move PIP frame in Picture in Picture Operation (See page 43).
Split Screen (see page 44)
Picture in Picture Operation (see page 42)
COMPONENT 2
DIGITAL-IN
TV
COMPONENT 1
VIDEO 3VIDEO 4 VIDEO 1VIDEO 2
Reduces volume
Moves cursor to the
left during menu
mode.
Displays menu
Press to access
DTV, DBS or DVD
menus.
During TV mode press
to select BBE VIVA ON
or BBE VIVA OFF.
Changes to the next channel down
Moves cursor downward during menu mode.
Increases volume
Moves cursor to
the right during
menu mode.
Changes to the next channel up
Moves cursor upward during menu mode.
Press to display
time, channel,
sleep timer and
other options.
STEREO SAP MONO
18
Basic Menu Operations
1
A
C
T
I
O
N
CH
CH
VOL VOL
Press to display the menu screen.
Press to select desired menu icon.
Press to enter submenu field.
2
Press to select desired submenu feature.
Press to select or adjust.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select OTHER ADJ.
Press to enter option menu field.
A
C
T
I
O
N
CH
CH
VOL VOL
Proceed to selection and adjustment of
the option menu.
[ for OTHER ADJ.]
A
C
T
I
O
N
CH
CH
VOL VOL
Press to return.
To return to MAIN MENU: To return to previous screen:
A
C
T
I
O
N
CH
CH
VOL VOL
Press to exit from the MENU screen.
This returns the set to the normal
viewing condition.
To end adjustments:
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
VIVID
:
EXIT
:
SUB MENU
NO
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
VIVID
PRESS ACTION FOR MAIN MENU
NO
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
VIVID
PRESS ACTION FOR MAIN MENU
NO
PRESS ACTION TO RETURN
35COLOR
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
PRESS TO ENTER
PICTURE
OTHER ADJ.
COOL
ON
OFF
ON
SD
ON
SPLIT
COLOR TEMP
NATURAL COLOR
VIDEO NR
3D Y/C FILTER
COLOR MATRIX
VM
FREEZE
PRESS ACTION FOR MAIN MENU
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
VIVID
:
EXIT
:
SUB MENU
NO
NORMAL PICTURE
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
VIVID
PRESS ACTION FOR MAIN MENU
NO
PRESS ACTION TO RETURN
35COLOR
19
Basic Menu Operations
PICTURE
AUDIO
CHANNELS
TIMER
LOCK
SET UP
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
VIVID
:
EXIT
:
SUB MENU
SET
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
PRESS TO ENTER
PICTURE
OTHER ADJ.
NORMAL
ON
OFF
ON
SD
ON
SPLIT
COLOR TEMP
NATURAL COLOR
VIDEO NR
3D Y/C FILTER
COLOR MATRIX
VM
FREEZE
PRESS ACTION FOR MAIN MENU
MODE
BASS
TREBLE
BALANCE
NORMAL
OTHER ADJ.
STEREO SAP MONO
SET
AUDIO
PRESS ACTION FOR MAIN MENU
MODE
BASS
TREBLE
BALANCE
NORMAL
OTHEAJ.
AUDIO
PRESS ACTION FOR MAIN MENU
PRESS TO ENTER
OTHER ADJ.
CH. SCAN
FAVORITES
OTHER ADJ.
ALL
CHANNELS
ENTER CHANNEL 3
FAVORITE CHANNELS
2 5 8 10
18 25
: ADD
: DELETE
PRESS ACTION FOR MAIN MENU
CH. SCAN
FAVORITES
OTHER ADJ.
CHANNELS
PRESS ACTION FOR MAIN MENU
PRESS TO ENTER
CHANNELS
PRESET CAPTION
MANUAL CAPTION
INPUT LABEL
PRESS ACTION TO RETURN
OTHER ADJ.
CHANNELS
A&E
AMC
BET
BRAVO
CNBC
CNN/SI
COMEDY
COURT
PRESS ACTION TO RETURN
PRESET CAPTION
ABC
CBS
FOX
NBC
PBS
CNN
ESPN
HBO
PRESS
FOR
MORE CHANNELS
CHANNELS
ENTER CHANNEL 10
ENTER CAPTION
PRESS ACTION TO RETURN
MANUAL CAPTION
TO MOVE CURSOR
TO SELECT CHANNEL
CHANNELS
COMPONENT1
COMPONENT2
DIGITAL-IN
VIDEO1
VIDEO2
VIDEO3
VIDEO4
PRESS ACTION TO RETURN
INPUT LABEL
TO MOVE CURSOR
TO SELECT LEBEL
NO
TIMER
SLEEP
TIMER1
TIMER2
CLOCK SET
PRESS ACTION FOR MAIN MENU
MON FRI
NO
TIMER
TIMER1
PRESS ACTION TO RETURN
DAY
ON TIME
OFF TIME
ENTER CHANNEL
SET
TIMER
CLOCK SET
PRESS ACTION TO RETURN
CREATE
CODE FIRST
LOCK
PRESS ACTION FOR MAIN MENU
LOCK SET
V - CHIP SET
HOW LONG?
CODE
PRESS ACTION FOR MAIN MANU
LOCK
OFF
U.S. MOVIES
SESTTING:
12HOURS
BLOCK PROGRAMS :
CHANG CODE
OTHER ADJ.
SET UP
PRESS ACTION FOR MAIN MENU
ENGLISH
ANT1
NO
OFF
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
PRESS TO ENTER
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
CABLE
OFF
ON
MODE
AUTO PROGRAMA
MANUAL PROGRAMA
AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS FOR MORE
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
OFF
PRESS FOR MORE
IMAGE SHIFT
ON IS RECOMMENDED
PRESS ACTION FOR MAIN MENU
ENTER CODE
LOCK
AI SOUND
BBE VIVA 3D
BBE
SURROUND
SPEAKERS
ON
ON
ON
ON
3D
AUDIO
PRESS ACTION TO RETURN
OTHER ADJ.
20
SET UP Operation
MENU Languages
In SET UP Menu, select IDIOMA / LANGUE to change menu language to
ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French).
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select IDIOMA / LANGUE.
ENGLISH
Press to select ENGLISH, SPANISH or FRENCH.
ANT1 ANT2
ANTENNA Selection
To select either ANT1 or ANT2.
Press to select ANT1 or ANT2.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select ANTENNA.
cc
ON MUTE
cc
MODE (Closed Captions)
This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form
of written words across the screen (white or colored letters on a black background). It allows the viewer to read the
dialogue of a television program or other information.
cc
ON MUTE
Activates the On-Screen Closed Caption feature, when the MUTE button on the Remote Control is pressed. To deactivate,
press the MUTE button again.
Note:
This feature functions when the Closed Caption Mode is in the “OFF” position. The program being viewed must be
broadcast with Closed Caption.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select
cc
ON MUTE.
Press to select from the following:
NO (OFF) C1 C2 C3 C4
OTHER ADJ.
SET UP
PRESS ACTION FOR MAIN MENU
ENGLISH
ANT1
NO
OFF
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
OTHER ADJ.
SET UP
PRESS ACTION FOR MAIN MENU
ENGLISH
ANT1
NO
OFF
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
OTHER ADJ.
SET UP
PRESS ACTION FOR MAIN MENU
ENGLISH
ANT1
NO
OFF
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
21
SET UP Operation
cc
MODE
Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in
this menu.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select
cc
MODE.
Press to select from the following:
OFF C1 C2 T1
C4T3T4 C3
T2
• CAPTION OFF -
• CAPTION C1 -
• CAPTION C2 -
• TEXT T1 -
• TEXT T2 -
• CAPTION C3 -
• CAPTION C4 -
• TEXT T3 -
• TEXT T4 -
Recommended mode when Closed Caption is not being used.
For video related information that can be displayed (up to 4 lines of script strategically placed on
the television screen so that it does not obstruct relevant parts of the picture).
Another mode used for video related information.
Blanks out a large portion of the picture on the television screen, and displays program guide or
any other information currently being transmitted.
Another mode which displays information and blanks out a large portion of the picture on the
television screen.
Another mode used for video related information.
Another mode used for video related information.
Another mode which displays information and blanks out a large portion of the picture on the
television screen.
Another mode which displays information and blanks out a large portion of the picture on the
television screen.
Notes:
(1) Recommended menu Set Up for Closed Caption when using Mute Button.
cc
ON MUTE: C1
cc
MODE: OFF
(2) The setting for CC ON MUTE is valid only when the CC MODE is OFF. CC MODE set to ON will override CC ON MUTE.
This menu cannot be selected when the MAIN picture is displaying a COMPONENT VIDEO INPUT of 480i or more.
(3) When aspect is ZOOM, Closed Caption cannot be used.
Selecting option menus in OTHER ADJ.
To select option menus in OTHER ADJ.
1
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select OTHER ADJ.
Press to enter option menu field.
A
C
T
I
O
N
CH
CH
VOL VOL
2
Proceed to adjustments.
Press to select desired option menu.
OTHER ADJ.
SET UP
PRESS ACTION FOR MAIN MENU
ENGLISH
ANT1
NO
OFF
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
OTHER ADJ.
SET UP
PRESS ACTION FOR MAIN MENU
IDIOMA/
LANGUE
ANTENNA
ON MUTE
MODE
PRESS TO ENTER
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
CABLE
OFF
ON
MODE
AUTO PROGRAMA
MANUAL PROGRAMA
AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS FOR MORE
22
AUTO PROGRAM
A
C
T
I
O
N
CH
CH
VOL VOL
To automatically program all channels with signal.
Press to select AUTO PROGRAM.
Press to start AUTO PROGRAM.
MODE Selection
To select either CABLE or TV.
A
C
T
I
O
N
CH
CH
VOL VOL
CABLE TV
Press to select MODE.
Press to select CABLE or TV.
MANUAL PROGRAM
To manually add or delete channels.
A
C
T
I
O
N
CH
CH
VOL VOL
1
Press to display next menu.
Press to select MANUAL PROGRAM.
123
456
78
0
9
Use remote numeric keypad to select
desired channel.
2
3
A
C
T
I
O
N
CH
CH
VOL VOL
Press to ADD or DELETE the channel.
MANUAL PROGRAM
TO ADD
ENTER CHANNEL 3
TO DELETE
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
CABLE
OFF
ON
MODE
AUTO PROGRAMA
MANUAL PROGRAMA
AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS FOR MORE
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
CABLE
OFF
ON
MODE
AUTO PROGRAMA
MANUAL PROGRAMA
AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS FOR MORE
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
CABLE
OFF
ON
MODE
AUTO PROGRAMA
MANUAL PROGRAMA
AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS FOR MORE
SET UP Operation
23
SET UP Operation
AUTO POWER ON
Select SET to power up the TV at the same time as the cable box or other components or select OFF.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select AUTO POWER ON.
Press to select SET or OFF.
SET OFF
CHAN BANNER
A
C
T
I
O
N
CH
CH
VOL VOL
Select ON to display the CHANNEL BANNER on the screen or select OFF.
Press to select CHAN BANNER.
Press to select ON or OFF.
ON OFF
Geomagnetic correction (Adjusting skewing of images)
GEOMAGNETIC CORR (CORRECTION) adjusts to erase the discoloration of the picture due to earth’s magnetic field in
the area.
This correction is made when moving the TV set or when image is slightly skewed.
2
A
C
T
I
O
N
CH
CH
VOL VOL
Adjust the vertical bar left or right until the
discoloration disappears.
GEOMAGNETIC CORRECTION
0
TO ADJUST
PRESS ACTION TO EXIT
Press to exit GEOMAGNETIC CORRECTION.
“DEGAUSSING” will be displayed for three seconds.
DEGAUSSING
1
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select GEOMAGNETIC CORR.
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
CABLE
SET
ON
MODE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS FOR MORE
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
CABLE
SET
ON
MODE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS FOR MORE
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
CABLE
SET
ON
MODE
AUTO PROGRAM
MANUAL PROGRAM
AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS FOR MORE
24
For use as a screen saver, this function changes the entire image position (shift).
SET UP Operation
IMAGE SHIFT
OTHER ADJ.
SET UP
PRESS ACTION TO RETURN
ON
PRESS FOR MORE
IMAGE SHIFT
ON IS RECOMMENDED
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select IMAGE SHIFT.
Press to select ON or OFF.
PICTURE MODE
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select PIC MODE.
Press to select your desired PICTURE MODE.
STANDARD CINEMAVIVID
COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select each submenu (COLOR / TINT /
BRIGHTNESS / PICTURE / SHARPNESS /
NORMAL).
Press to adjust the desired level by looking at the
picture behind the menu.
Item
Function
COLOR
TINT
BRIGHTNESS
PICTURE
Adjusts desired color intensity.
Adjusts natural flesh tones.
Adjusts dark areas of picture.
SHARPNESS
NORMAL
Adjusts white areas of picture.
Adjusts clarity of outline detail.
Resets all picture adjustments to factory default settings.
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
VIVID
:
EXIT
:
SUB MENU
SET
PICTURE Adjustment
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
:
EXIT
:
SUB MENU
SET
VIVID
ON OFF
25
COLOR MATRIX
Displays input signals (480p signals) in a natural color from digital equipment adaptors connected to COMPONENT VIDEO
INPUT (Y, Pb/Cb ,Pr/Cr input terminals).
SD : When the input signal is a normal TV
system (NTSC).
HD : When the input signal is a High-Definition
system (ATSC).
Select HD or SD to automatically adjust color parameters for HD (high definition) and SD (standard definition).
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select COLOR MATRIX.
Press to select SD or HD.
Note:
(1) When viewing a non-standard DTV signal format, you can change color parameters manually for the best picture quality.
(2)
COLOR MATRIX does not need to be set when using High-Definition equipment or 480i output equipment. Use only for 480p signal source.
PICTURE
OTHER ADJ.
NORMAL
ON
OFF
ON
SD
ON
SPLIT
COLOR TEMP
NATURAL COLOR
VIDEO NR
3D Y/C FILTER
COLOR MATRIX
VM
FREEZE
PRESS ACTION FOR MAIN MENU
Selecting option menus in OTHER ADJ.
To select option menus in OTHER ADJ.
1
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select OTHER ADJ.
Press to enter option menu field.
A
C
T
I
O
N
CH
CH
VOL VOL
2
Proceed to adjustments.
Press to select desired option menu.
PICTURE
PIC MODE
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ.
PRESS ACTION FOR MAIN MENU
PRESS TO ENTER
PICTURE
OTHER ADJ.
NORMAL
ON
OFF
ON
SD
ON
SPLIT
COLOR TEMP
NATURAL COLOR
VIDEO NR
3D Y/C FILTER
COLOR MATRIX
VM
FREEZE
PRESS ACTION FOR MAIN MENU
COLOR TEMP (Temperature) / NATURAL COLOR / VIDEO NR / 3D Y/C FILTER
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select each option menu (COLOR TEMP
/ NATURAL COLOR / VIDEO NR / 3D Y/C FILTER).
Press to adjust the desired level by looking at the
picture behind the menu.
PICTURE
OTHER ADJ.
NORMAL
ON
OFF
ON
SD
ON
SPLIT
COLOR TEMP
NATURAL COLOR
VIDEO NR
3D Y/C FILTER
COLOR MATRIX
VM
FREEZE
PRESS ACTION FOR MAIN MENU
ON OFF
NORMAL WARM
COOL
ON OFF
ON OFF
Item
Explanations
COLOR TEMP
(temperature)
NATURAL COLOR
VIDEO NR
3D Y/C FILTER
To increase or decrease WARM (red) and COOL
(blue) colors to suit personal preferences.
To increase the color reproduction range with natural
color gradation and highly delicate hues.
Reduces noise in the channel,commonly called
snow. Remains off when receiving a strong signal.
Minimizes noise and cross color in the picture.
Mode
PICTURE Adjustment
26
FREEZE
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select FREEZE.
Press to select SPLIT or PIP.
SPLIT PIP
1
Select SPLIT or PIP to determine the frozen picture frame during single screen.
FREEZE
FREEZE
TV/VCR
FREEZE
2
When the screen is single press
FREEZE
TV/VCR
to freeze the screen.
When FREEZE SPLIT is selected. When FREEZE PIP is selected.
3
FREEZE
TV/VCR
Press
FREEZE
TV/VCR
again to recover.
Notes:
(1)
When
FREEZE
TV/VCR
is pressed during Split Screen, the Split Screen will be frozen and the main picture continues action (see page 47).
(2)
When
FREEZE
TV/VCR
is pressed during PIP Operation, the PIP frame will be frozen and the main picture continues action (see page 46).
Main Picture
Split Screen
(FREEZE)
PIP frame
(FREEZE)
Main Picture
PICTURE
OTHER ADJ.
NORMAL
ON
OFF
ON
SD
ON
SPLIT
COLOR TEMP
NATURAL COLOR
VIDEO NR
3D Y/C FILTER
COLOR MATRIX
VM
FREEZE
PRESS ACTION FOR MAIN MENU
VM (Velocity Modulation)
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select VM.
Press to select ON or OFF.
ON OFF
Select ON to emphasize the edge of an image, or select OFF.
PICTURE
OTHER ADJ.
NORMAL
ON
OFF
ON
SD
ON
SPLIT
COLOR TEMP
NATURAL COLOR
VIDEO NR
3D Y/C FILTER
COLOR MATRIX
VM
FREEZE
PRESS ACTION FOR MAIN MENU
PICTURE Adjustment
27
MODE
BASS
TREBLE
BALANCE
NORMAL
OTHER ADJ.
STEREO SAP MONO
SET
AUDIO
PRESS ACTION FOR MAIN MENU
Audio Adjustment
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select MODE.
Note:
AUDIO MODE selection is also possible by pressing the
SAP
button on the remote control (see page 17).
Selecting STEREO/SAP/MONO
Red display - Signal available
White display - Signal not available
Press to select STEREO / SAP / MONO.
•
STEREO - Two channel Audio reception.
•
SAP - Second Audio Programming (typically used for bilingual audio).
•
MONO - Use when stereo signal is weak.
Helpful Hints:
Selecting BASS / TREBLE / BALANCE / NORMAL
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select BASS / TREBLE / BALANCE / NORMAL.
Press to adjust the desired level by listening to the sound.
MODE
BASS
TREBLE
BALANCE
NORMAL
OTHER ADJ.
STEREO SAP MONO
SET
AUDIO
PRESS ACTION FOR MAIN MENU
To select option menus in OTHER ADJ.
1
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select OTHER ADJ.
Press to enter option menu field.
A
C
T
I
O
N
CH
CH
VOL VOL
2
Proceed to adjustments.
Press to select desired option menu.
MODE
BASS
TREBLE
BALANCE
NORMAL
OTHEAJ.
AUDIO
PRESS ACTION FOR MAIN MENU
PRESS TO ENTER
OTHER ADJ.
AI SOUND
BBE VIVA 3D
BBE
SURROUND
SPEAKERS
ON
ON
OFF
OFF
OFF
AUDIO
PRESS ACTION TO RETURN
OTHER ADJ.
Selecting option menus in OTHER ADJ.
AI SOUND Equalize overall volume levels across all channels.(AI sound is not available in VIDEO mode).
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select AI SOUND.
Press to select ON or OFF.
Note: Al SOUND is not available in VIDEO mode.
ON OFF
AI SOUND
BBE VIVA 3D
BBE
SURROUND
SPEAKERS
ON
ON
OFF
OFF
OFF
AUDIO
PRESS ACTION TO RETURN
OTHER ADJ.
Item
Effect Function
BASS
TREBLE
BALANCE
NORMAL
Increase or decrease the bass response.
Increase or decrease the treble response.
Emphasize the left / right speaker volume.
Reset BASS, TREBLE and BALANCE adjustments to factory default settings.
Less More
Less More
Left SP. Right SP.
NO
AI SOUND
28
ON
To enjoy a concert hall effect, turn the SURROUND to ON.
SURROUND function is effective when BBE VIVA is set to OFF.
Press to select ON or OFF.
ON OFF
Notes:
During stereo sound or soft playing : SURROUND set to ON.
During monoural sound : SURROUND set to OFF.
Press to select SURROUND.
AI SOUND
BBE VIVA 3D
BBE
SURROUND
SPEAKERS
ON
ON
OFF
OFF
OFF
AUDIO
PRESS ACTION TO RETURN
OTHER ADJ.
SPEAKERS
Select the desired SPEAKER mode.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select SPEAKERS.
Press to select your desired mode.
ON OFF & VARIABLE AUDIO OUT
OFF & FIXED AUDIO OUT
AI SOUND
BBE VIVA 3D
BBE
SURROUND
SPEAKERS
ON
ON
OFF
OFF
OFF
AUDIO
PRESS ACTION TO RETURN
OTHER ADJ.
BBE VIVA / BBE
Notes:
• When “BBE VIVA” is set to ON, “BBE” and “SURROUND” setting are fixed to ON.
• When “BBE VIVA” is set to OFF, “BBE” and “SURROUND” can be set individually.
Audio Adjustment
A
C
T
I
O
N
CH
CH
VOL VOL
BBE VIVA This maintains a constant level of sound that is faithful to the original, producing
Hi-Fi 3D sound that cannot be obtained with other types of 3D Surround.
BBE Use special signal processing to accurately reproduce the "attack" of each
sound, in order to make it immediate and superbly faithful to the original,
while retaining its natural feel.
The distinguishing feature of BBE VIVA is its maintenance of accurate audio imagery. Ordinary 3D surround systems force the
sound out to the left and right, affecting the center channel. As a result it may become hard to hear people's voices, or the
center audio may completely disappear. BBE VIVA reproduces vocals in music and voices in movies accurately and distinctly.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select BBE VIVA [ With BBE VIVA Version]
or BBE [ No BBE VIVA Version].
Press to select ON or OFF.
ON OFF
[ No BBE VIVA Version]
AI SOUND
BBE VIVA 3D
BBE
SURROUND
SPEAKERS
ON
ON
OFF
OFF
OFF
AUDIO
PRESS ACTION TO RETURN
OTHER ADJ.
[ With BBE VIVA Version]
AI SOUND
BBE VIVA 3D
BBE
SURROUND
SPEAKERS
ON
ON
ON
ON
3D
AUDIO
PRESS ACTION TO RETURN
OTHER ADJ.
Mode Function
OFF & Variable Audio Out
OFF & Fixed Audio Out
TV speakers operate normally.
TV speakers off -audio adjustable by television.
TV speakers off -audio adjustable by the external amplifier only.
SURROUND
29
CHANNEL SCAN
Let you select the channel scanning mode either FAV or ALL.
CHANNEL SCAN FAV To enter up to 16 favorite channels.
CHANNEL SCAN ALL To scan all channels when using the CH up/down buttons.
CHANNELS Adjustment
FAV ALL
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select CH. SCAN.
Press to select FAV or ALL.
1
Press to select FAVORITES.
FAVORITE CHANNELS Selection
A
C
T
I
O
N
CH
CH
VOL VOL
Use remote numeric keypad to select desired
channel.
2
123
456
78
0
9
3
Press to add or to delete the selected
channel.
A
C
T
I
O
N
CH
CH
VOL VOL
4
Repeat step 2 to 3 up to 16 favorite channels.
23
CH. SCAN
FAVORITES
OTHER ADJ.
ALL
CHANNELS
ENTER CHANNEL 3
FAVORITE CHANNELS
2 5 8 10
18 25
: ADD
: DELETE
PRESS ACTION FOR MAIN MENU
CH. SCAN
FAVORITES
OTHER ADJ.
ALL
CHANNELS
ENTER CHANNEL 3
FAVORITE CHANNELS
2 5 8 10
18 25
: ADD
: DELETE
PRESS ACTION FOR MAIN MENU
CH. SCAN
FAVORITES
OTHER ADJ.
ALL
CHANNELS
ENTER CHANNEL 15
FAVORITE CHANNELS
2 5 8 10
15 18 25
: ADD
: DELETE
PRESS ACTION FOR MAIN MENU
(Example: Channel 15 is added)
(Example: Channel 15 is selected)
CH. SCAN
FAVORITES
OTHER ADJ.
ALL
CHANNELS
ENTER CHANNEL 15
FAVORITE CHANNELS
2 5 8 10
18 25
: ADD
: DELETE
PRESS ACTION FOR MAIN MENU
30
Selecting option menus in OTHER ADJ.
To select option menus in OTHER ADJ.
1
Press to select OTHER ADJ.
Press to enter option menu field.
CHANNELS Adjustment
A
C
T
I
O
N
CH
CH
VOL VOL
A
C
T
I
O
N
CH
CH
VOL VOL
2
Proceed to adjustments.
Press to select desired option menu.
Assign channel numbers to pre-set popular TV stations.
PRESET CAPTION
A
C
T
I
O
N
CH
CH
VOL VOL
123
456
78
0
9
Use remote numeric keypad to select desired
channel (refer to your local TV guide).
3
1
Press to select PRESET CAPTION.
Press to display next menu.
Note:
To delete a channel, press VOL while channels
highlighted.
CH. SCAN
FAVORITES
OTHER ADJ.
CHANNELS
PRESS ACTION FOR MAIN MENU
PRESS TO ENTER
CHANNELS
PRESET CAPTION
MANUAL CAPTION
INPUT LABEL
PRESS ACTION TO RETURN
OTHER ADJ.
CHANNELS
PRESET CAPTION
MANUAL CAPTION
INPUT LABEL
PRESS ACTION TO RETURN
OTHER ADJ.
A
C
T
I
O
N
CH
CH
VOL VOL
2
Press to select desired PRESET CAPTION.
CHANNELS
A&E
AMC
BET
BRAVO
CNBC
CNN/SI
COMEDY
COURT
PRESS ACTION TO RETURN
PRESET CAPTION
ABC
CBS
FOX
NBC
PBS
CNN
ESPN
HBO
PRESS
FOR
MORE CHANNELS
31
Enter channel numbers and captions manually.
MANUAL CAPTION
1
Press to select MANUAL CAPTION.
Press to display next menu.
A
C
T
I
O
N
CH
CH
VOL VOL
123
456
78
0
9
A
C
T
I
O
N
CH
CH
VOL VOL
Use remote numeric keypad to select desired
channel (refer to your local TV guide).
2
Press to enter desired channel.
OR
3
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select ENTER CAPTION.
4
A
C
T
I
O
N
CH
CH
VOL VOL
Press to move cursor.
Repeat Step 4 up to 4 characters.
Press to select characters.
Note:
In MANUAL CAPTION up to 4 characters can be selected as a CAPTION.
INPUT LABEL
Label video input connections to display optional equipment.
1
Press to select INPUT LABEL.
2
A
C
T
I
O
N
CH
CH
VOL VOL
Press to move cursor.
Press to select desired LABEL.
Note:
To skip, select LABEL, then press VOL or VOL to
select ‘‘SKIP’’. The selected INPUT mode will be skipped
when
TV/VIDEO
button is pressed.
CHANNELS Adjustment
CHANNELS
PRESET CAPTION
MANUSL CAPTION
INPUT LABEL
PRESS ACTION TO RETURN
OTHER ADJ.
CHANNELS
ENTER CHANNEL 10
ENTER CAPTION
PRESS ACTION TO RETURN
MANUAL CAPTION
TO MOVE CURSOR
TO SELECT CHANNEL
CHANNELS
ENTER CHANNEL 10
ENTER CAPTION
PRESS ACTION TO RETURN
MANUAL CAPTION
TO MOVE CURSOR
TO SELECT CHARACTER
CHANNELS
ENTER CHANNEL 10
ENTER CAPTION : / 5 A
PRESS ACTION TO RETURN
MANUAL CAPTION
TO MOVE CURSOR
TO SELECT CHARACTER
A
C
T
I
O
N
CH
CH
VOL VOL
Press to display next menu.
CHANNELS
PRESET CAPTION
MANUSL CAPTION
INPUT LABEL
PRESS ACTION TO RETURN
OTHER ADJ.
CHANNELS
COMPONENT1
COMPONENT2
DIGITAL-IN
VIDEO1
VIDEO2
VIDEO3
VIDEO4
VCR
PRESS ACTION TO RETURN
INPUT LABEL
TO MOVE CURSOR
TO SELECT LEBEL
32
TIMER
The TIMER can switch the TV ON or OFF. Before attempting TIMER1 and TIMER2 confirm the CLOCK SET and adjust if
necessary. Then set TIMER1 and TIMER2.
SLEEP
SLEEP sets the sleep time.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select SLEEP.
Press to select the desired sleep time.
To turn off the timer select NO.
NO 30 60 90
NO
TIMER
SLEEP
TIMER1
TIMER2
CLOCK SET
PRESS ACTION FOR MAIN MENU
TIMER1 and TIMER2
In TIMER menu, select one or both timers to turn the television on and off at selected times, on selected channels, and on
selected days.TIME must be entered in CLOCK SET to operate the TIMER features.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select TIMER1 or TIMER2.
Press to enter.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select DAY.
Press to set the day of the week.
(select day or days)
DAY
Set the day of the week.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select ON TIME.
Press to set hours AM or PM.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to move to minutes position.
Press to set minutes.
ON TIME
Set the time of day.
1
2
TIMER
SLEEP
TIMER1
TIMER2
CLOCK SET
PRESS ACTION FOR MAIN MENU
PRESS TO ENTER
PRESS TO ENTER
MON FRI
NO
TIMER
TIMER1
PRESS ACTION TO RETURN
DAY
ON TIME
OFF TIME
ENTER CHANNEL
SET
MON FRI
1 2 : 0 0 PM
NO
TIMER
TIMER1
PRESS ACTION TO RETURN
DAY
ON TIME
OFF TIME
ENTER CHANNEL
SET
MON FRI
1 2 : 0 0 PM
NO
TIMER
TIMER1
PRESS ACTION TO RETURN
DAY
ON TIME
OFF TIME
ENTER CHANNEL
SET
33
TIMER
Press to select OFF TIME.
Press to set hours AM or PM.
Press to move to minutes position.
Press to set minutes.
OFF TIME
Set the time of day.
1
2
A
C
T
I
O
N
CH
CH
VOL VOL
A
C
T
I
O
N
CH
CH
VOL VOL
A
C
T
I
O
N
CH
CH
VOL VOL
A
C
T
I
O
N
CH
CH
VOL VOL
ENTER CHANNEL
1
2
NOYES
Press to select ENTER CHANNEL.
Press to select channel.
Press to select SET.
Press to select YES.
Notes:
(1) When the power to the TV set is disrupted due to a power outage or similar problem, after power is restored, the off-
timer will be deactivated and the TV will be in standby mode.
(2) To see the remaining sleep time, press the RECALL button.
The television automatically turns OFF after 90
minutes when turned ON by the TIMER. If the OFF
time is selected or if a key is pressed, the automatic
OFF after 90 minutes will be cancelled.
Turn Off After 90 Minutes
The TIMER is active when the television is OFF or
ON. The television will switch to the selected
channel at the selected time set in the TIMER.
TIMER Activation
MON FRI
1 2 : 0 0 PM
1 3 : 0 0 PM
NO
TIMER
TIMER1
PRESS ACTION TO RETURN
DAY
ON TIME
OFF TIME
ENTER CHANNEL
SET
MON FRI
1 2 : 0 0 PM
1 3 : 0 0 PM
NO
TIMER
TIMER1
PRESS ACTION TO RETURN
DAY
ON TIME
OFF TIME
ENTER CHANNEL
SET
MON FRI
1 2 : 0 0 PM
1 3 : 0 0 PM
5
NO
TIMER
TIMER1
PRESS ACTION TO RETURN
DAY
ON TIME
OFF TIME
ENTER CHANNEL
SET
MON FRI
1 2 : 0 0 PM
1 3 : 0 0 PM
5
NO
TIMER
TIMER1
PRESS ACTION TO RETURN
DAY
ON TIME
OFF TIME
ENTER CHANNEL
SET
34
CLOCK SET
1
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select CLOCK SET.
Press to enter.
CLOCK SET sets the present time. This is necessary to operate the TIMER features.
2
A
C
T
I
O
N
CH
CH
VOL VOL
Press to set hours AM or PM.
TIME
Set the time of day.
TIMER
SLEEP
TIMER1
TIMER2
CLOCK SET
PRESS ACTION FOR MAIN MENU
PRESS TO ENTER
TIMER
CLOCK SET
1 2 : 0 0 AM SUN
PRESS ACTION TO RETURN
TIMER
CLOCK SET
1 2 : 3 0 PM SUN
PRESS ACTION TO RETURN
TIMER
CLOCK SET
1 2 : 3 0 PM SUN
PRESS ACTION TO RETURN
3
Press to move to minutes position.
Press to set minutes.
4
Press to move to DAY position.
Press to select the day of the week.
DAY
Set the day of the week.
A
C
T
I
O
N
CH
CH
VOL VOL
TIMER
A
C
T
I
O
N
CH
CH
VOL VOL
35
LOCK Feature
CREATE
CODE FIRST
LOCK
PRESS ACTION FOR MAIN MENU
123
456
78
0
9
After entering your secret code for the first time, the
onscreen display will change to ENTER CODE.
Use the remote numeric keypad to enter a four-digit
secret code.
While entering a code, by pressing the up or down
button you can input a new code again.
Notes:
(1) Use a code that is easy to remember and record it in a safe place.
(2) If you do not remember your code, LOCK will unlock in 12, 24, or 48 hours, depending on the current setup. Be cautious
when selecting ALWAYS. If ALWAYS is selected, and you forget your secret code, the TV must be serviced by a
qualified technician to clear the LOCK setup.
To use LOCK options CREATE CODE FIRST.
CREATE CODE FIRST
Select LOCK SET to prevent video games and VCR tapes from being viewed.
LOCK SET
Press to select LOCK SET.
OFF ALLCHANNELGAME
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select from the following.
LOCK SET
V-CHIP SET
HOW LONG?
CODE
PRESS ACTION FOR MAIN MENU
LOCK
OFF
U.S. MOVIES
SESTTING:
12HOURS
BLOCK PROGRAMS :
CHANGE CODE
Function
Turns Lock function off.
Lock CH 3, 4 and Video inputs.
Lock up to four channels.
Locks all channels and video inputs.
MODE
OFF
GAME
CHANNEL
ALL
If you select CODE, and you change your code from the one used in the CREATE CODE FIRST or ENTER CODE, your
new code becomes the controlling code.
Press to select CODE.
A
C
T
I
O
N
CH
CH
VOL VOL
123
456
78
0
9
Use the remote numeric
keypad to enter a four-
digit secret code.
LOCK SET
V-CHIP SET
HOW LONG?
CODE
PRESS ACTION FOR MAIN MENU
LOCK
OFF
U.S. MOVIES
SESTTING:
12HOURS
BLOCK PROGRAMS :
CHANGE CODE
CODE
PRESS ACTION FOR MAIN MENU
ENTER CODE
LOCK
36
CHANNEL
A
C
T
I
O
N
CH
CH
VOL VOL
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select CHANNEL.
2
1
Press to select channel position.
Press to select channels.
(Or use remote numeric keypad to select channels.)
3
Repeat step 2 for up to four channels.
123
456
78
0
9
LOCK THESE CHANNELS
1 124
PRESS ACTION TO RETURN
LOCK MODE
TO MOVE CURSOR
TO SELECT CHANNEL
LOCK
CHANNEL
LOCK THESE CHANNELS
1 124
PRESS ACTION TO RETURN
LOCK MODE
TO MOVE CURSOR
TO SELECT CHANNEL
LOCK
CHANNEL
In the United States and Canada, the V-CHIP consists of two rating systems, which are MPAA (MOTION PICTURE) and TV
PARENTAL GUIDELINES. Its function is to block programs by following the rating data in the XDS data packets sent from
broadcasting stations. The user can select which rating programs should be blocked by using the LOCK MENU options.
V-CHIP SET
Press to select V-CHIP SET.
Press to select from the following.
A
C
T
I
O
N
CH
CH
VOL VOL
U.S. MOVIES
CANADIAN ENGLISHCANADIAN FRENCH
U.S. TV PROGRAMS
1
A
C
T
I
O
N
CH
CH
VOL VOL
2
Press to select SETTING.
Press to enter SETTING.
LOCK SET
V-CHIP SET
HOW LONG?
CODE
PRESS ACTION FOR MAIN MENU
LOCK
OFF
U.S. MOVIES
SESTTING:
12HOURS
BLOCK PROGRAMS :
CHANGE CODE
LOCK SET
V-CHIP SET
HOW LONG?
CODE
PRESS ACTION FOR MAIN MENU
LOCK
OFF
U.S. MOVIES
SESTTING:
12HOURS
BLOCK PROGRAMS :
CHANGE CODE
LOCK Feature
37
U.S. TV PROGRAMS
U.S. TV PROGRAMS RATING CHART
1
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select U.S. TV PROGRAMS.
Press to select U.S. TV PROGRAMS ON or OFF.
ON OFF
2
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select VIEW NR PROGRAMS?.
Press to select VIEW NR PROGRAMS? YES or NO.
NOYES
YES: NR programs will be received.
NO: NR programs will be blocked.
3
Press to select SETTING.
Press to select BASIC or DETAILED.
BASIC: Allows you to select only general ratings
such as TV-Y, TV-PG, etc.
DETAILED: Allows you to select both general ratings
and content such as V, L, etc.
Note: See Customer Caution.
4
A
C
T
I
O
N
CH
CH
VOL VOL
Press to move between different ratings.
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Perform Step 4 for each rating.
Note: See the U.S. TV PROGRAMS RATINGS CHART.
LOCK Feature
PRESS ACTION TO RETURN
U. S TV PROGRAMS
VIEW NR PROGRAMS?
SETTING:
LOCK
ON
YES
BASIC
TY-Y
TY-Y7 FV
TY-G
TY-PG V S L D
TY-1 4 V S L D
TY-MA V S L D
PRESS ACTION TO RETURN
U. S TV PROGRAMS
VIEW NR PROGRAMS?
SETTING:
LOCK
ON
YES
BASIC
TY-Y
TY-Y7 FV
TY-G
TY-PG V S L D
TY-1 4 V S L D
TY-MA V S L D
PRESS ACTION TO RETURN
U. S TV PROGRAMS
VIEW NR PROGRAMS?
SETTING:
LOCK
ON
YES
BASIC
TY-Y
TY-Y7 FV
TY-G
TY-PG V S L D
TY-1 4 V S L D
TY-MA V S L D
PRESS ACTION TO RETURN
U. S TV PROGRAMS
VIEW NR PROGRAMS?
SETTING:
LOCK
ON
YES
BASIC
TY-Y
TY-Y7 FV
TY-G
TY-PG V S L D
TY-1 4 V S L D
TY-MA V S L D
This TV model features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to block
various types of TV programs. PIP will also be blocked automatically.
A
C
T
I
O
N
CH
CH
VOL VOL
NR
Not Rated. SEE CUSTOMER CAUTION on the next page.
TV-Y
All children. The themes and elements in this program are specifically designed for a very
young audience, including children from ages 2-6.
TV-Y7
Directed to older children. Themes and elements in this program may include mild physical or
comedic violence, or may frighten children under the age of 7.
TV-G
General audience. It contains little or no violence, no strong language, and little or no sexua dialogue or situations.
TV-PG
Parental guidance suggested. The program may contain infrequent coarse language, limited
violence, some suggestive sexual dialogue and situations.
TV-14
Parents strongly cautioned. This program may contain sophisticated themes, sexual content,
strong language and more intense violence.
TV-MA
Mature audiences only. This program may contain mature themes, profane language, graphic
violence, and explicit sexual content.
FV
FANTASY/CARTOON VIOLENCE
V
VIOLENCE
S
SEX
L
OFFENSIVE LANGUAGE
D
DIALOGUE WITH SEXUAL CONTENT
U.S. TV PROGRAMS RATINGS CHART
38
LOCK Feature
The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and
none) per FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and
possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of
programming:”
Customer Caution
• Emergency Bulletins (Such as EAS messages, weather warnings and others)
• Locally originated programming • News • Political • Public Service Announcements • Religious • Sports
• Weather
U.S. MOVIES
This TV model features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or
video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. PIP will
also be blocked automatically.
U.S. MOVIES RATING CHART
1
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select U.S. MOVIES.
Press to select U.S. MOVIES ON or OFF.
ON OFF
2
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select VIEW NR MOVIES?.
Press to select VIEW NR PROGRAMS? YES or NO.
NOYES
3
A
C
T
I
O
N
CH
CH
VOL VOL
Press to move between different ratings.
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Continue Step3 for each ratings.
Note: See the U.S. MOVIES RATINGS CHART.
Note:
Some movies are not rated for a variety of reasons.
Old movies and foreign films are usually not rated.
PG-13, R, NC-17 and X will be blocked.
VIEW NR PROGRAMS?
PRESS ACTION TO RETURN
U. S MOVIES
LOCK
OFF
YES
G
PG
PG-13
R
NC-17
X
VIEW NR PROGRAMS?
PRESS ACTION TO RETURN
U. S MOVIES
LOCK
OFF
YES
G
PG
PG-13
R
NC-17
X
VIEW NR PROGRAMS?
PRESS ACTION TO RETURN
U. S MOVIES
LOCK
OFF
YES
G
PG
PG-13
R
NC-17
X
U.S. MOVIES RATINGS CHART
NR
CONTAINS NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie
has not been rated or rating does not apply.
G GENERAL AUDIENCES. All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
X ADULTS ONLY.
39
Canadian English
The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the two
rating systems used in Canada. PIP will also be blocked automatically.
CANADIAN ENGLISH RATINGS CHART
E
Exempt - Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
C
Programming intended for children under age 8. No offensive language, nudity or sexual
content.
C8+
Programming generally considered acceptable for children 8 years and over. No profanity,
nudity or sexual content.
G General programming, suitable for all audiences.
PG Parental Guidance suggested. Some material may not be suitable for children.
14+
Programming contains themes or content which may not be suitable for viewers under the age
of 14. Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens
and early teens.
18 ADULTS ONLY
LOCK Feature
A
C
T
I
O
N
CH
CH
VOL VOL
1
Press to select CANADIAN ENGLISH ON or OFF.
ON OFF
A
C
T
I
O
N
CH
CH
VOL VOL
2
Press to select VIEW E PROGRAMS?
Press to select VIEW E PROGRAMS? YES or NO.
NOYES
Note:
E (Exempt) programming includes: news, sports,
documentaries and other information programming, talk
shows, music videos, and variety programming.
Press to select CANADIAN ENGLISH.
VIEW E PROGRAMS?
PRESS ACTION TO RETURN
CANADIAN ENGLISH
LOCK
OFF
YES
C
C8+
G
PG
14+
18+
VIEW E PROGRAMS?
PRESS ACTION TO RETURN
CANADIAN ENGLISH
LOCK
OFF
YES
C
C8+
G
PG
14+
18+
A
C
T
I
O
N
CH
CH
VOL VOL
3
Press to move between different ratings.
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Note: See the CANADIAN ENGLISH RATING CHART.
VIEW E PROGRAMS?
PRESS ACTION TO RETURN
CANADIAN ENGLISH
LOCK
OFF
YES
C
C8+
G
PG
14+
18+
40
Canadian French
The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings
categories. PIP will also be blocked automatically.
1
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select CANADIAN FRENCH ON or OFF.
ON OFF
Press to select CANADIAN FRENCH.
CANADIAN FRENCH RATINGS CHART
E Exempt - Exempt programming.
G
General - Programming intended for audience of all ages. Contains no violence, or the
violence content is minimal or is depicted appropriately.
8 ANS+
8+ General - Not recommended for young children. Programming intended for a broad
audience but contains light or occasional violence. Adult supervision recommended.
13ANS+
Programming may not be suitable for children under the age of 13 - Contains either a few
violent scenes or one or more sufficiently violent scenes to affect them. Adult supervision
strongly suggested.
16ANS+
Programming may not be suitable for children under the age of 16 - Contains frequent scenes
of violence or intense violence.
18ANS+
18 ans +Programming restricted to adults. Contains constant violence or scenes of extreme
violence.
LOCK Feature
VIEW E PROGRAMS?
PRESS ACTION TO RETURN
CANADIAN FRENCH
LOCK
OFF
YES
G
8 ANS+
13 ANS+
16 ANS+
18 ANS+
VIEW E PROGRAMS?
PRESS ACTION TO RETURN
CANADIAN FRENCH
LOCK
OFF
YES
G
8 ANS+
13 ANS+
16 ANS+
18 ANS+
2
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select VIEW E PROGRAMS?
Press to select VIEW E PROGRAMS? YES or NO.
NOYES
Note:
E (Exempt) programming includes: news, sports,
documentaries and other information programming,
talk shows, music videos, and variety programming.
3
A
C
T
I
O
N
CH
CH
VOL VOL
Press to move between different ratings.
Press to select ratings you would like to block (RED)
and unblock (GREEN).
Note: See the CANADIAN FRENCH RATINGS CHART.
13ANS+, 16ANS+ and 18ANS+ will
be blocked.
VIEW E PROGRAMS?
PRESS ACTION TO RETURN
CANADIAN FRENCH
LOCK
OFF
YES
G
8 ANS+
13 ANS+
16 ANS+
18 ANS+
41
Blocking Message
If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio
will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all
locks and rating blocks are disabled until the TV is turned off or until all settings are off.
Note:
If you enter your four-digit secret code to override rating blocks, you must reset
all rating blocks by either reprogramming or turning the TV off.
Split Screen Blocking Message
PIP function is available when V-Chip is activated. If the program being viewed in PIP exceeds the set rating limit, PIP will
disappear and a blocking message will be displayed.
Note:
Enable PIP functions by setting Lock Set, U.S. TV PROGRAM, U.S. MOVIES,
CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF.
PIP Blocking Message
Split Screen function is available when V-Chip is activated. If the program being viewed in Split Screen exceeds the set
rating limit, Split Screen will disappear and a blocking message will be displayed.
Note:
Enable Split Screen functions by setting Lock Set, U.S. TV PROGRAM, U.S.
MOVIES, CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF.
PROGRAM RATING EXCEEDED
ACCESS CODE
PROGRAM
RATING
EXCEEDED
ACCESS
CODE
PIP RATING
EXCEEDED
LOCK Feature
After setting the LOCK SET and V-CHIP SET, set the blocking hours.
HOW LONG?
Press to select 12HOURS/24HOURS/48HOURS /
ALWAYS.
A
C
T
I
O
N
CH
CH
VOL VOL
Press to select HOW LONG?
12HOURS 24HOURS
48HOURSALWAYS
LOCK SET
V-CHIP SET
HOW LONG?
CODE
PRESS ACTION FOR MAIN MENU
LOCK
OFF
U.S. MOVIES
SESTTING:
12HOURS
BLOCK PROGRAMS :
CHANGE CODE
42
Picture in Picture Operation
This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the
same time with or without an external video source such as a VCR, cable box, etc.
Basic PIP Operation
1
Press the PIP button on the remote control to display the PIP
Frame on screen.
Note:
Audio is from Main Picture
only.
2
Select channels for the PIP frame by pressing
PIP CH
VCR CH
.
3
Press to select channel for the Main Picture.
or
Use the remote control numeric keypad.
Main Picture
Picture-in-Picture Frame
4
Press to view picture source status.
5
Press
PIP
again to cancel the PIP Frame.
SWAP
Press
SWAP
to switch the PIP and MAIN PICTURE source.
PIP
PIP CH
VCR CH
A
C
T
I
O
N
CH
CH
VOL VOL
123
456
78
0
9
RECALL
PIP
SWAP
A
B
AB
B
A
DTV
AUX
DVD
VCR
DBS
RCVR
POWER
BBE
MENU
PLAY
R-TUNE PROG
GUIDE
SAP
PAGEEXIT
STOPPAUSE
REC
CBL
VOL VOL
A
C
T
I
O
N
TV
123
456
789
0
CH
CH
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
SPLIT
RECALL
PIP MAX
FF
PIP MIN
REW
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
SWAPPIP MOVE
43
Picture in Picture Operation
PIP MIN, PIP MAX
Freeze
These features are used to size PIP Frame.
Press
PIP MIN
REW
or
PIP MAX
FF
to size the PIP Frame.
During PIP operation this feature is used to stop action in PIP frame.
PIP MIN
REW
PIP MAX
FF
FREEZE
TV/VCR
Press
FREEZE
TV/VCR
again to continue action.
Press
FREEZE
TV/VCR
to stop PIP frame action.
1 In PICTURE MENU OTHER ADJ, select FREEZE
PIP or SPLIT (see p26).
2 Press
FREEZE
TV/VCR
while PIP frame is not displayed.
1
2
Note:
To stop action for Main picture:
Minimum
MAX
Main Picture
FREEZE
Main Picture
TV/VIDEO Button
Press when PIP frame is displayed to select desired input mode.
Main Picture
TV/VIDEO
Picture-in-Picture Frame
CH #
CH #
PIP COMPONENT 1 PIP DIGITAL-INPIP COMPONENT 2
PIP VIDEO 1
PIP VIDEO 2PIP VIDEO 3
PIP VIDEO 4PIP VIDEO 4
Search
This feature lets you scan through all available channels.
MOVE
SEARCH
OPEN/CLOSE
Press
SEARCH
OPEN/CLOSE
to display search frames.
1
2
Press
SEARCH
OPEN/CLOSE
again to stop search feature. This returns
the screen to the previous condition (single screen, PIP
screen or SPLIT screen).
Move
This feature is used to move PIP frame to one of four corners.
Press
MOVE
to position PIP frame to desired corner.
Search Frames
Main Picture
PIP Frames
Main Picture
44
This feature lets you watch two different channels side by side with or without an external video source.
The audio is from the Main picture only (left side).
Split screen enables you to search other channels on the right screen or check video recording status.
Split Screen
Notes:
(1) Sound from the left screen is output from the speakers on the TV set (and headphone jack).
(2) When the screen is split, signals of the left screen are output from the rear monitor output terminal.
(3) The left and right screens are processed by individual circuits, and therefore, may have slight variation in image quality.
(4) Split screen returns to single screen when the TV is turned off.
(5) The right and left screens cannot display the same picture at the same time.
DTV
AUX
DVD
VCR
DBS
RCVR
POWER
PIP MAX
FF
MOVE
RECALL
BBE
MENU
PLAY
R-TUNE PROG
GUIDE
SAP
PAGEEXIT
PIP
STOPPAUSE
REC
PIP MIN
REW
CBL
VOL VOL
A
C
T
I
O
N
TV
123
456
789
0
CH
CH
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
FREEZE
TV/VCR
SWAPSPLIT
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
(The previously selected screen appears.)
1
Main Picture
Splitting the screen
Press
SPLIT
to display Split screen.
Split Screen
2
Returning to one screen.
Press
SPLIT
again to return.
Main Picture
Freezing pictures
1
During Split Screen this feature is used to stop action in SPLIT screen.
Press
FREEZE
TV/VCR
to stop action in SPLIT screen.
FREEZE
TV/VCR
FREEZE
Press
FREEZE
TV/VCR
again to recover.
2
1 In PICTURE MENU OTHER ADJ, select FREEZE
PIP or SPLIT (see p26).
2 Press
FREEZE
TV/VCR
while SPLIT frame is not displayed.
Note:
To stop action for Main picture:
45
Split Screen
Changing the channels for the Split Screen Swapping left and right screens
Changing the channels for the Main Picture
Select channels for the Main Picture by pressing
CH
CH
or use the remote control numeric keypad.
Viewing Videos
While Split screen is displayed, press
TV/VIDEO
to
switch modes.
Select channels for the Split Screen by
pressing
PIP CH
VCR CH
.
Press
SWAP
to switch the SPLIT SCREEN and
MAIN PICTURE source.
SWAP
CH10
CH10
CH
CH
123
456
78
0
9
CH10
CH5
CH10
CH5
CH5
CH10
TV/VIDEO
CH10
VIDEO 1
Searching the other channels
press
SEARCH
OPEN/CLOSE
to search the other channels.
SEARCH
OPEN/CLOSE
Press
SEARCH
OPEN/CLOSE
again to stop the search.
This returns the screen to its previous condition.
Search Frames
CH10
PIP CH
VCR CH
46
ASPECT Controls
The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
ASPECT button
The aspect mode changes each time the ASPECT button is pressed.
Notes:
(1) For a 480p signal input during component input signal mode, the
mode will change as follows:
(2) When a 1080i signal is being received, the mode is set to FULL, and
aspect switching is not possible.
(3) During PIP operation, ASPECT Controls are available only in the
main picture according to the receiving signal of the main picture.
(4) During SPLIT Screen, ASPECT Controls are not available.
ASPECT
A
C
T
I
O
N
TV
DTV
CBL
AUX
DVD
VCR
DBS
RCVR
CH
CH
VOL VOL
RECALL
SAP
BBE
MENU
POWER
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
ZOOM FULL JUST
4 : 3
4 : 3FULL ZOOM
4 : 3 will display a 4:3 picture at its standard 4:3 size.
ZOOM mode magnifies the central section of the
picture.
FULL will display the picture at its maximum size but
with slight elongation.
JUST mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the sides
of the screen so that elongation is only apparent at
the left and right edges of the screen. The size of the
picture will depend on the original signal.
Mode
Picture Explanation
4 : 3
ZOOM
FULL
JUST
JUST
4
3 9
16
ZOOM
4
3
16
9
FULL
4
3
16
9
4 : 3
3
4
47
Operating peripheral equipment using the remote control
Programming The Illuminated Remote Control Using Access Codes
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your
Remote Control with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
1
Confirm that the external component is plugged in and operating.
2
Turn the component off.
3
TV
DTV
CBL
AUX
DVD
VCR
DBS
RCVR
4
POWER
+
A
C
T
I
O
N
CH
CH
VOL VOL
123
456
78
0
9
5
Press POWER and ACTION together, for at least 5 seconds.
After 5 seconds, all the illuminated mode keys will begin to flash.
Release the POWER and ACTION keys.
Press the mode key.
The mode key will illuminate steadily, all others will go out.
Enter the 3-digit component code using the Remote Control numeric keypad.
6
POWER
Press the Remote Control
POWER
to test the component. If the procedure is successful,
the component will turn on.
If the component does not operate with the Remote Control, repeat the
procedure using another code. (Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes longer than 30
seconds,the programming will fail.
Helpful Hints: Unsuccessful Code
Device
TV
DTV
CABLE
DBS
VCR
DVD/CD
AUX
RCVR
Operates
TV (Panasonic Only)
DTV (Panasonic Only)
CABLE (Preset)
DBS (Preset)
VCR (Preset)
DVD and CD (Preset)
Personal Video Recorders,
Tape and VCR2
Audio Receiver (Preset)
Default
Panasonic TV Codes
Panasonic DTV Codes
Panasonic CABLE Codes
Panasonic DBS Codes
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic Personal Video
Recorders Code
Panasonic RCVR Code
Default Modes For Remote Control
48
Programming Without A Code (When the code is not known)
This procedure searches all codes and is called the “sequence method.”
1
Confirm that the external component is plugged in and on.
2
Turn the component off.
3
TV
DTV
CBL
AUX
DVD
VCR
DBS
RCVR
4
POWER
+
A
C
T
I
O
N
CH
CH
VOL VOL
Press POWER and ACTION together, for at least 5
seconds.
After 5 seconds, all the illuminated mode keys will
begin to flash.
Release the POWER and ACTION key.
Press the mode key.
The mode key will illuminate steadily, all others will go
out.
Press to move forward to the next code, or to move
backward.
Press the Remote Control
POWER
to test the component. If the procedure was
successful, the component will turn on.
5
6
POWER
PIP MAX
FF
RECALL
MOVESPLIT
PLAY
R-TUNE PROG
GUIDE
SAP
PAGEEXIT
STOPPAUSE
REC
PIP MIN
REW
SEARCH
OPEN/CLOSE
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
FREEZE
TV/VCR
PIP
PIP CH
VCR CH
CH
CH
VOL VOL
A
C
T
I
O
N
SWAP
POWER
BBE
MENU
123
456
78
0
9
DTV
AUX
DVD
VCR
DBS
RCVR
CBL
TV
A
C
T
I
O
N
CH
CH
VOL VOL
Note:
The step and set mode will start from the current device (not the beginning of the
list, except for the first time).
Note:
Repeat the above steps until the component code is found. It may take many
attempts before the correct code is found.
7
A
C
T
I
O
N
CH
CH
VOL VOL
After the code is found, press ACTION to store the code.
Operating peripheral equipment using the remote control
49
Operating peripheral equipment using the remote control
The remote control is capable of operating many brands of peripheral equipment. Refer to pages 50 and 51 for programming procedures.
Note: The remote control memory is limited and therefore some models may not operate. The remote control is not
designed to control all features available in all models.
Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control. Refer to
pages 16 and 47 - 48 for details on operating peripheral equipment using the remote control.
Infrared Codes Index
Infrared Remote Codes for Specific Components
Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a
handy reference whenever you need to reprogram your remote control.
CABLE
Cable Box
DBS
Digital Broadcast System
Other Component
Other Component
VCR
Video Cassette Recorder
RCVR
Receiver or Amplifier
Other Component
Other Component
CD
Compact Disc Player
LD
Laser Disc Player
Other Component
Other Component
Brand Code
Orion 320, 326
Panasonic 321, 322, 323, 324
J.C.Penney
300, 305, 310, 311, 324, 339, 345
Pentax 300, 311, 345
Philco 320, 323, 324, 326, 331, 343
Philips 323, 324, 331
Pioneer 323
Proscan 300, 301, 302, 323, 324, 331,
333, 345, 346
Quasar 321, 322, 323, 324
Radio Shac 305, 309, 324, 333, 336, 340
RCA 300, 301, 302, 323, 324, 331,
333, 345, 346
Realistic 305, 309, 324, 336, 340
Samsung 302, 304, 333
Sansui 320, 326, 339, 352
Sanyo 305, 309, 313
Scott 301, 302, 304, 309, 320, 326,
338, 340, 347, 348
Sears 300, 305, 306, 307, 308
Sharp 335, 336
Shintom 317
Signature 2000 335
Singer 317
Sony 328, 329, 330
Sylvania 323, 324, 331
Tashiro 306
Tatung 310, 311, 339
Teac 310, 311, 339
Technics 321, 322, 323, 324
Teknika 324
Toshiba 301, 346
Vector Research 311
Wards 306, 309, 335, 336, 344
Yamaha 305, 310, 311, 339
Zenith 306, 344
Brand Code
Admiral 335
Aiwa 332
Akai 314, 315, 316, 329
Audio Dynamic 311, 339
Bell &Howell 305, 313
Broksonic 320, 326
Canon 323, 325
Citizen 306
Craig 305, 306, 329
Curtis Mathes 324, 345
Daewoo 301, 324, 343
DBX 310, 311, 339
Dimensia 345
Emerson 303, 319, 320, 325, 326, 343
Fisher 305, 307, 308, 309, 313
Funai 320, 326, 334
GE 324, 333, 345
Goldstar 306
Gradiente 334
Hitachi 300, 323, 345
Instant Replay 323, 324
Jensen 339
JVC 310, 311, 334, 339
Kenwood 306, 310, 311, 339
LXI 300, 305, 306, 307, 308, 309
Magnavox 323, 324, 331
Marantz 310, 311, 339
Marta 306
Memorex 309, 324
MGA 338, 340, 341, 347, 348
Minolta 300, 345
Mitsubishi 338, 340, 341, 347, 348
Multitech 304, 347
NEC 310, 311, 334, 339
Olympic 323, 324
Optimus 306, 321, 328, 335
VCR
Codes for VCR
50
Brand Code
Panasonic Replay
100
Philips Tivo 101
Sony Tivo 102
VCR
Codes for Personal Video Recorders
Brand Code
Denon 100
Ferguson 101
JVC 109
Mitsubishi 105
Nordmende 101
Panasonic 100
Philips 103
Pioneer 102
RCA 101
Codes for DVD
DVD
Brand Code
Saba 101
Samsung 110
Sharp 108
Sony 104
Technics 100
Thomson 101
Toshiba 103
Yamaha 100
Zenith 107
Brand Code
Admiral 226
Aiwa 233, 235
Carver 229
Denon 242
Emerson 239
Fisher 205
Harman/Kardon 219, 220, 221, 223
Hitachi 207
Jensen 234
JVC 240, 241, 245
Kardon 223
Kenwood 200, 201, 211, 245
LXI/Sears 236
Magnavox 229, 232
Marantz 229
McIntosh 221
Nakamichi 210
Onkyo 214, 215
Codes for CD
DVD
Brand Code
Optimus 208, 218, 220, 222
Panasonic 224, 225, 227
Philips 229, 230
Pioneer 208
Quasar 224, 225, 227
RCA 231, 237, 238, 247
Sansui 210, 246
Sanyo 205
Scott 210, 246
Sharp 242, 243
Sherwood 220
Sony 228
Soundesign 244
Teac 212, 216, 218
Technics 224, 225, 227
Victor 240, 241, 245
Yamaha 202, 203, 204
Brand Code
Aiwa 223, 224, 225
Denon 231
Fisher 203
Jensen 214
JVC 229, 230
Kenwood 200, 207
Marantz 202
Nakamichi 205
Onkyo 208, 209, 213
Panasonic 216, 218
Codes for Cassette Deck
Brand Code
Philips 222
Pioneer 204
RCA 226, 227, 228
Sansui 205, 210
Sharp 231
Sony 219, 220
Teac 210, 211, 215
Technics 216, 218
Yamaha 201, 202
AUX
Operating peripheral equipment using the remote control
51
Brand Code
Admiral 120
Aiwa 125, 126
Denon 134, 135, 136
Fisher 104
Garrard 113
Harman Kardon 115, 123
Jensen 129
JVC 132, 133
Kenwood 100, 108
Magnavox 127
Marantz 124
Mclntosh 116
Nakamichi 106
Onkyo 109, 114
Codes for Receivers
Brand Code
Optimus 103, 127, 130, 131
Panasonic 118, 119, 121
Philips 123
Pioneer 105, 107
Quasar 118, 119, 121
RCA 103, 105, 127, 130, 131
Sansui 103, 111, 139
Sharp 134, 137
Sony 122
Soundesign 138
Teac 111, 112, 113
Technics 118, 119, 121
Victor 132, 133
Yamaha 101, 102
RCVR
Brand Code
ABC 124
Archer 125, 132
Cableview 105, 132
Citizen 105, 122
Curtis 112, 113
Diamond 124, 125, 132
Eagle 129
Eastern 134
GC Brand 105, 132
Gemini 122
General 111, 119, 120, 121, 122, 123,
Instrument/Jerrold
124, 125, 126, 127
Hamlin 112, 118, 140, 141, 142, 145
Hitachi 103, 124
Macom 103, 104, 105
Magnavox 133
Memorex 130
Movietime 105, 132
Oak 102, 137, 139
Panasonic 109, 110, 114
Philips 106, 107, 128, 129, 130
Pioneer 101, 116
Pulsar 105, 132
Codes for Cable Box
CBL
Brand Code
Puser 132
RCA 115
Realistic 132
Regal 112, 118, 140, 141, 142, 145
Regency 134
Rembrandt 105, 132, 137
Samsung 105
Scientific Atlanta 111, 112, 113
Slmark 101, 105
Sprucer 105, 110
Stargate 105, 132
Tel eview 101, 105
Texscan 144
Tocom 135
Toshiba 104
Unika 125, 132
Universal 122, 132
Videoway 106
Viewstar 129, 130
Zenith 100, 117
Zenith /Drae 100
Satellite
Brand Code
Dish Network 105, 115, 116
(Echostar)
Echo Star 105
Express VU 105, 115
G.E. 106
G.I. 108
(General Instrument)
Gradiente 114
Hitachi 103, 111, 112
HNS (Hughes) 103
Codes for DBS
DBS
Brand Code
Magnavox 101, 102
Panasonic 104
Philips 101, 102
Primestar 108
Proscan 106, 109, 110, 113
RCA 106, 109, 110, 113
Sony 107
Star Choice 103, 108
Toshiba 100
Uniden 101, 102
Operating peripheral equipment using the remote control
52
Operating peripheral equipment using the remote control
Mode Operational Key Chart
This chart defines which keys that are operational after programming (if needed), while in the selected remote control
mode TV, DTV, CABLE, DBS, VCR, DVD ...etc.
KEY NAME TV MODE DTV MODE CABLE MODE DBS MODE
POWER POWER POWER POWER
SAP ON/OFF
-- -
MUTE TV MUTE CBL MUTE TV MUTE
TV ASPECT DTV ASPECT
-
DBS ASPECT
TV INPUT SW TV INPUT SW TV INPUT SW TV INPUT SW
REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS
CHANNEL UP/DOWN NAVIGATION UP/DOWN
CABLE CHANNEL UP/DOWN
DBS NAVIGATION UP/DOWN
ACTION ACTION ENTER DBS ACTION
VOL + /
-
NAVIGATION RIGHT/LEFT CABLE VOL + /
-
DBS NAVIGATION RIGHT/LEFT
-
MENU
-
DBS MENU
DISPLAY PROGRAM INFO. TV DISPLAY DBS PROG.INFO
--
DBS EXIT
-- -
DBS PAGE UP/DOWN
--
DBS GUIDE
Select Channel Select Channel Select Channel Select Channel
PREVIOUS STB CHAN CABLE PREVIOUS DBS PREVIOUS
-
DTV PROGRAM/DASH
-
DBS PROGRAM/DASH
-- -
-- - -
-- - -
-- - -
-
VCR RECORD DBS RECORD
PIP FREEZE
--
TV/DBS SWITCH
-
TV CHANNEL UP/DOWN DBS CHANNEL UP/DOWN
PIP SEARCH
-- -
PIP ON/OFF
-- -
SPLIT ON/OFF
-- -
MOVE PIP
-- -
PIP or SPLIT SWAP
-- -
EXIT (EPG)ELECTRONIC
PROGRAM GUIDE
GUIDE (EPG)ELECTRONIC
PROGRAM GUIDE
PREVIOUS CHAN
OR VIDEO MODE
PIP MINIMIZE/
MAXIMIZE
PIP or SPLIT
CHAN UP/DOWN
Info (EPG) ELECTRONIC
PROGRAM GUIDE
RECALL
123
456
78
0
9
BBE
MENU
EXIT
PAGE
GUIDE
PIP MAX
FF
PIP MIN
REW
FREEZE
TV/VCR
PIP
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
PLAY
PAUSE
STOP
REC
SPLIT
MOVE
SWAP
A
C
T
I
O
N
CH
CH
VOL VOL
ASPECT
POWER
TV/VIDEO
MUTE
LIGHT
SAP
53
Operating peripheral equipment using the remote control
DVD MODE AUX MODE
KEY NAME VCR MODE RCVR MODE
(DVD) (CD) (VCR2) (TAPE)
POWER POWER POWER POWER POWER POWER
------
TV MUTE TV MUTE RCVR MUTE TV MUTE RCVR MUTE RCVR MUTE
------
TV INPUT SW TV INPUT SW
-
TV INPUT SW TV INPUT SW TV INPUT SW
REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS
-
TUNER +/
-
TV ACTION SELECT
-
TV ACTION
--
TV VOLUME +/
-
TV VOLUME +/
-
RCVR VOLUME +/
-
RCVR VOLUME +/
-
-
DVD MENU
----
DVD DISPLAY TIME FORMAT
--
------
-
SKIP +/
-
SKIP +/
-- - -
-
TITLE NEXT TRACK
---
Select Channel Select Channel
-
----
DECK A/B
-
------
VCR REW/FF
SEARCH REW/FF
VCR REW/FF
TAPE REW/FF
SURROUND
-
/+
PLAY PLAY PLAY PLAY PLAY
-
PAUSE PAUSE PAUSE PAUSE PAUSE
-
STOP STOP STOP STOP STOP
-
VCR RECORD
--
VCR RECORD TAPE RECORD
-
TV/VCR SWITCH
--
TV/VCR SWITCH
--
-- --
-
OPEN/CLOSE OPEN/CLOSE
-
OPEN/CLOSE
-
------
------
------
------
VCR CHAN
UP/DOWN
NAVIGATION
UP/DOWN
NEXT/PREVIOUS
TRACK
VCR CHANNEL
UP/DOWN
NAVIGATION
UP/DOWN
RCVR VOLUME
UP/DOWN
ONSCREEN VCR
DISPLAY
ONSCREEN VCR
DISPLAY
1.... AV1
2.... AV2
3.... AV3
4.... AV4
5.... CD
6.... TUNER
7.... PHONO
8.... TAPE
9.... AUX
Select Chapter
Number
Select Track
Number
VCR CHANNEL
UP/DOWN
VCR CHANNEL
UP/DOWN
SKIP SEARCH
<<REW/>>FF
RECALL
123
456
78
0
9
BBE
MENU
EXIT
PAGE
GUIDE
PIP MAX
FF
PIP MIN
REW
FREEZE
TV/VCR
PIP
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
PLAY
PAUSE
STOP
REC
SPLIT
MOVE
SWAP
A
C
T
I
O
N
CH
CH
VOL VOL
ASPECT
POWER
TV/VIDEO
MUTE
LIGHT
SAP
54
Manual de instrucciones
[Resumen]
Precauciones relacionadas con el uso de las pilas
La instalación incorrecta de las pilas puede causar fugas en las
mismas y corrosión, lo que dañará el control remoto.
Tenga en cuenta las precauciones siguientes:
1. Las pilas deberán sustituirse siempre en pares. Utilice siempre
pilas nuevas cuando sustituya las pilas viejas.
2. No mezcle una pila usada con otra nueva.
3. No mezcle pilas de tipos diferentes (ejemplo: "carbono y cinc" con
"alcalinas").
4. No intente cargar, cortocircuitar, desarmar, calentar o quemar las
pilas usadas.
5. Las pilas tendrán que sustituirse cuando el control remoto funcione
esporádicamente o no pueda controlar el televisor.
Se necesitan dos pilas AA.
1. Ponga el control remoto con el
lado de los botones hacia abajo.
Retire la cubierta presionando
hacia abajo sobre la marca y
deslizándola en el sentido
indicado.
2. Instale las pilas como se muestra
en el compartimiento de las pilas.
(Las polaridades + y – deberán
coincidir con las marcas
correspondientes del
compartimiento).
3. Vuelva a poner la cubierta y
deslícela hasta que quede
bloqueada.
Dos pilas tamaño AA
A los usuarios que utilizan frecuentemente el
control remoto se les recomienda sustituir las
pilas viejas por pilas alcalinas que duran más.
Consejos útiles
Siempre que retire las pilas, puede que necesite
volver a poner las claves del control remoto
de infrarrojos. Le recomendamos anotar la clave
de la página 49 antes de preparar el control
remoto.
Consejos útiles
Instalación de las pilas en el control remoto
Conexión del cable de la antena al terminal de entrada de RF
DIGITAL
IN
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
PB
PR
Y
VIDEO
AUDIO
R
L
TO AUDIO
AMP
R
L
12
123
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
Notas:
(1) Para obtener una imagen y un sonido de calidad óptima se necesita una antena, el cable correcto (coaxial de 75
ohmios) y la clavija de terminación correcta.
(2) Si se utiliza un sistema de antena comunitaria, tal vez necesite emplear una clavija y un cable de conexión correctos
entre el zócalo de antena de pared y su receptor de televisión.
(3) El centro de servicio de televisión de su localidad o su concesionario podrán ayudarle a obtener el sistema de antena
correcto para su zona particular y los accesorios necesarios.
(4) Cualquier tema relacionado con la instalación de la antena, la mejora de los sistemas o accesorios existentes requeridos
y los gastos incurridos son responsabilidad exclusiva de usted, el cliente.
Cable de entrada de
antena doméstica
Cable de entrada
de compañía de
televisión por
cable
75 ohmios, VHF/
UHF, panel
posterior del
televisor
• Para recibir correctamente los canales de VHF/UHF se necesita una antena externa. Para obtener la mejor recepción
se recomienda una antena exterior. El modo de antena deberá ponerse en TV.
• Cable de entrada desde antena doméstica
Conecte la antena doméstica a ANT1 del panel posterior del televisor. Seleccione el modo del televisor y ANT1 en el
menú SET UP. (El modo de televisión por cable ha sido prefijado en la fábrica. Los usuarios de antenas deberán
cambiar al modo del televisor y seleccionar ANT1 en el menú SET UP bajo Programación de canales.
Conexión de la antena
Antena de VHF Antena de UHF
Mezclador
Cable coaxial
de 75 ohmios
55
Conexión/desconexión de la alimentación
Conexión del enchufe a un tomacorriente
Nota:
Los tipos de los enchufes principales cambian según
los países. Por lo tanto, el enchufe de alimentación
mostrado a la izquierda tal vez no sea igual al tipo de
enchufe de su aparato.
Presione el interruptor POWER del televisor para
encenderlo.
Alimentación encendida: Rojo
Cuando el aparato esté encendido, pulse el interruptor
POWER para apagarlo.
STANDBY: Apagado
Ejemplo: La pantalla de abajo se visualiza durante un
rato después de encenderse el televisor. (La
condición del ajuste es un ejemplo.)
Presione el botón POWER del control remoto para
encender el televisor: Rojo
Presione el botón POWER del control remoto para
apagar el televisor: Apagado (espera).
Cómo conectar la alimentación
Sensor del control remoto
A
C
T
I
O
N
TV
DTV
CBL
AUX
DVD
VCR
DBS
RCVR
CH
CH
VOL VOL
RECALL
SAP
BBE
MENU
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
POWER
POWER
Selección del idioma del menú
En el menú SET UP, seleccione IDIOMA/LANGUE para cambiar el idioma del menú a ENGLISH (inglés), ESPAÑOL o
FRANCAIS (francés). (Consulte la página 20.)
Nota:
El televisor consumirá algo de energía siempre que el cable de alimentación
esté conectado a una toma de corriente.
CH 3
SAP
JUSTO
VIVIDO
56
INPUT
OUTPUT
S-VIDEOVIDEO
L
-
AUDIO
-
R
INPUT 4
ACTION
TV/VIDEO
VOLUME
HPJ
CHANNEL
S-VIDEO VIDEO
L
-
AUDIO
-
R
INPUT 4
ACTION
TV/VIDEO
VOLUME
HPJ
CHANNEL
A
C
T
I
O
N
DTV
AUX
DVD
VCR
DBS
RCVR
CH
VOL VOL
SAP
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
POWER
CBL
TV
A la entrada
de antena
TERMINAL DE ANTENA EN EL PANEL
POSTERIOR DEL TELEVISOR
Cable de entrada desde
la antena o sistema de
televisión por cable
Interruptor de la alimentación
Sensor del control remoto
La operación se puede hacer desde
el televisor.
•
Selectores de canales
•
Controles de volumen
Confirmación
Confirme que el registro con la televisión por cable y la
conexión del equipo hayan sido completados. Encienda el
sintonizador de televisión por cable y seleccione el nivel de
volumen necesario.
Televisión por cable
Cuando el cable de la antena se conecte al terminal de
antena del televisor vía un decodificador de televisión por
cable o una videograbadora, seleccione el canal del televisor
CH3 o CH4. Esto no se hace cuando la señal entra desde
VIDEO INPUT.
Presione mientras apunta el control remoto hacia el
decodificador de televisión por cable.
Nota:
El número de la clave del control remoto está fijado
para los productos Panasonic.
Cuando los equipos periféricos no funcionen, reponga
la clave (consulte las páginas 49-50).
Seleccione el nivel del volumen deseado utilizando
el sintonizador de TV por cable.
1
2
3
Notas:
(1) El número del canal y el nivel del volumen se fijan incluso
después de apagar el televisor.
(2) El consumo de energía y el aullido del sonido se pueden
reducir si se baja el nivel del volumen.
CBL
Presione
CBL
para confirmar.
VHF, UHF y CATV
DECODIFICADOR DE
TELEVISIÓN POR CABLE
Seleccione el nivel del volumen
deseado.
4
A
C
T
I
O
N
CH
CH
VOL VOL
Presione
TV
para controlar el televisor con
el control remoto.
1
TV
Presione para encender el televisor (consulte
la página 13).
2
POWER
Presione para seleccionar el
canal deseado.
3
A
C
T
I
O
N
CH
CH
VOL VOL
VHF y UHF
57
Operaciones básicas con menús
1
A
C
T
I
O
N
CH
CH
VOL VOL
Presione para visualizar la pantalla de
menú.
Presione para seleccionar el icono de
menú deseado.
Presione para entrar en campo del menú
secundario.
2
Presione para seleccionar la función de
menú secundario deseada.
Presione para seleccionar o ajustar.
A
C
T
I
O
N
CH
CH
VOL VOL
Presione para seleccionar OTROS AJ.
Presione para entrar en el campo del
menú secundario.
A
C
T
I
O
N
CH
CH
VOL VOL
Prosiga con la selección y el ajuste del
menú de opciones.
[para OTROS AJ.]
A
C
T
I
O
N
CH
CH
VOL VOL
Presione para retornar.
Para volver a MANÚ principal: Para volver a la pantalla anterior:
A
C
T
I
O
N
CH
CH
VOL VOL
Presione para salir de la pantalla
MENÚ.
Así vuelve a la condición de visión
normal.
Para finalizar los ajustes:
IMAGEN
MODO
COLOR
TINTE
BRILLO
CONTRASTE
NITIDEZ
NORMAL
OTROS AJ.
VIVIDO
:
SALIR
:
SUBMENU
NO
IMAGEN
MODO
COLOR
TINTE
BRILLO
CONTRASTE
NITIDEZ
NORMAL
OTROS AJ.
VIVIDO
PRESIONE ACTION PARA MENU
NO
IMAGEN
MODO
COLOR
TINTE
BRILLO
CONTRASTE
NITIDEZ
NORMAL
OTROS AJ.
VIVIDO
PRESIONE ACTION PARA MENU
NO
PRESIONE ACTION PARA REGRESAR
35COLOR
IMAGEN
MODO
COLOR
TINTE
BRILLO
CONTRASTE
NITIDEZ
NORMAL
OTROS AJ.
PRESIONE ACTION PARA MENU
PARA ENTRAR
IMAGEN
OTROS AJ.
AZUL
S I
NO
S I
SD
S I
I D I
TEMP COLOR
COLOR NATURAL
REDUC DE RUIDO
3D Y/C FILTRO
MATRIZ COLOR
MV
INMOVILIZAR
PRESIONE ACTION PARA MENU
IMAGEN
MODO
COLOR
TINTE
BRILLO
CONTRASTE
NITIDEZ
NORMAL
OTROS AJ.
VIVIDO
:
SALIR
:
SUBMENU
NO
IMAGEN NORMAL
IMAGEN
MODO
COLOR
TINTE
BRILLO
CONTRASTE
NITIDEZ
NORMAL
OTROS AJ.
VIVIDO
PRESIONE ACTION PARA MENU
NO
PRESIONE ACTION PARA REGRESAR
35COLOR
58
Operaciones básicas con menús
PICTURE
AUDIO
CHANNELS
TIMER
LOCK
SET UP
IMAGEN
MODO
COLOR
TINTE
BRILLO
CONTRASTE
NITIDEZ
NORMAL
OTROS AJ.
VIVIDO
:
SALIR
:
SUBMENU
SI
IMAGEN
MODO
COLOR
TINTE
BRILLO
CONTRASTE
NITIDEZ
NORMAL
OTROS AJ.
PRESIONE ACTION PARA MENU
PARA ENTRAR
IMAGEN
OTROS AJ.
NORMAL
I D I
TEMP COLOR
COLOR NATURAL
REDUC DE RUIDO
3D Y/C FILTRO
MATRIZ COLOR
MV
INMOVILIZAR
PRESIONE ACTION PARA MENU
S I
NO
S I
SD
S I
MODO
BAJOS
ALTOS
BALANCE
NORMAL
OTROS AJ.
ESTEREO SPA MONO
SI
AUDIO
PRESIONE ACTION PARA MENU
MODO
BAJOS
ALTOS
BALANCE
NORMAL
OTROS AJ.
AUDIO
PRESIONE ACTION PARA MENU
PARA ENTRAR
OTROS AJ.
BUSQUEDA
FAVORITOS
OTROS AJ.
TODO
CANALES
ELIJA CANAL 3
CANALES FAVORITOS
2 5 8 10
18 25
: AGREGAR
: ELIMINAR
PRESIONE ACTION PARA MENU
BUSQUEDA
FAVORITOS
OTROS AJ.
CANALES
PRESIONE ACTION PARA MENU
PARA ENTRAR
CANALES
PREFIJADO
MANUAL
PONGA TITULO
PRESIONE ACTION PARA REGRESAR
OTROS AJ.
CANALES
A&E
AMC
BET
BRAVO
CNBC
CNN/SI
COMEDY
COURT
PRESIONE ACTION PARA REGRESAR
PREFIJADO
ABC
CBS
FOX
NBC
PBS
CNN
ESPN
HBO
PRESIONE
PARA MAS CNLS
CANALES
ELIJA CANAL 10
PONGA IDENTIDAD
PRESIONE ACTION PARA REGRESAR
MANUAL
PARA MOVER CURSOR
PARA ESCOGER CANAL
CANALES
COMPONENTE1
COMPONENTE2
ENT. DIG.
VIDEO1
VIDEO2
VIDEO3
VIDEO4
PRESIONE ACTION PARA REGRESAR
PONGA TITULO
PARA MOVER CURSOR
PARA SELECCIONAR ETIQUETA
NO
CRONOMETRO
APAGADO
CRONOM1
CRONOM2
RELOJ
PRESIONE ACTION PARA MENU
LUN VIE
NO
CRONOMETRO
CRONOM1
PRESIONE ACTION PARA REGRESAR
DIA
ENCENDER
APAGAR
ELIJA CANAL
FIJO
CRONOMETRO
RELOJ
PRESIONE ACTION PARA REGRESAR
CREAR
CLAVE
BLOQUEO
PRESIONE ACTION PARA MENU
BLOQUEO
V - CHIP
TIEMPO?
CLAVE
PRESIONE ACTION PARA MENU
BLOQUEO
NO
PELICULAS DE EEUU
PROGRAMACION:
12HORAS
PROGRAMAS :
CAMBIO DE
CLAVE
OTROS AJ.
AJUSTE
PRESIONE ACTION PARA MENU
ESPAÑOL
ANT1
NO
NO
IDIOMA/
LANGUE
ANTENA
EN MUDO
MODO
PARA ENTRAR
OTROS AJ.
AJUSTE
PRESIONE ACTION PARA REGRESAR
CABLE
NO
S I
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
AUTOENCENDIDO
CANAL INFO.
CORR GEOMAGNETICA
PARA CONTINUAR
OTROS AJ.
AJUSTE
PRESIONE ACTION PARA REGRESAR
NO
PARA CONTINUAR
IMAGEN
SI ES RECOMENDADO
PRESIONE ACTION PARA MENU
INGRESAR
CLAVE
BLOQUEO
SONIDO IA
BBE VIVA 3D
BBE
ENVOLVENTE
ALTAVOCES
SI
S I
S I
S I
3D
AUDIO
PRESIONE ACTION PARA REGRESAR
OTROS AJ.
59
PROGRAMA AUTOMÁTICO
A
C
T
I
O
N
CH
CH
VOL VOL
Para programar automáticamente todos los canales con una señal.
Selección de MODO
Para seleccionar CABLE o TV.
A
C
T
I
O
N
CH
CH
VOL VOL
PROGRAMA MANUAL
Para agregar o eliminar canales manualmente.
A
C
T
I
O
N
CH
CH
VOL VOL
1
123
456
78
0
9
2
3
A
C
T
I
O
N
CH
CH
VOL VOL
PROGRAMA MANUAL
PARA AGREGAR
ELIJA CANAL 3
PARA ELIMINAR
OTROS AJ.
AJUSTE
PRESIONE ACTION PARA REGRESAR
CABLE
NO
S I
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
AUTOENCENDIDO
CANAL INFO.
CORR GEOMAGNETICA
PARA CONTINUAR
OTROS AJ.
AJUSTE
PRESIONE ACTION PARA REGRESAR
CABLE
NO
S I
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
AUTOENCENDIDO
CANAL INFO.
CORR GEOMAGNETICA
PARA CONTINUAR
OTROS AJ.
AJUSTE
PRESIONE ACTION PARA REGRESAR
CABLE
NO
S I
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
AUTOENCENDIDO
CANAL INFO.
CORR GEOMAGNETICA
PARA CONTINUAR
CABLE TV
Pulse para seleccionar MODO.
Pulse para seleccionar CABLE o TV.
Pulse para iniciar PROGRAMA AUTO.
Pulse para seleccionar PROGRAMA AUTO.
Pulse para visualizar el siguiente menú.
Para seleccionar PROGRAMA MANUAL.
Utilice el teclado del control remoto para
seleccionar el canal deseado.
Pulse para AGREGAR o ELIMINAR el canal.
PREPARACIÓN
60
Control remoto iluminado
Ubicación de los controles
Botón de la alimentación
Púlselo para encender o apagar el televisor (consulte la página 13).
Nota: El cable de la alimentación del televisor deberá enchufarse
primero al tomacorriente, y el televisor encenderse luego con
el interruptor POWER (modo de espera).
Botón R-TUNE
Cambia al canal o modo de vídeo anterior.
Botón MUTE
Presione este botón para silenciar el sonido, y púlselo de nuevo para cancelar el silenciamiento.
Funcionamiento de otro dispositivo
TV
DTV
CBL
AUX
DVD
VCR
DBS
RCVR
Botones de selección de modo
Seleccionan el modo de funcionamiento para el control remoto. (Consulte la página 48.)
Selección del modo de videograbadora
para el control remoto
Selección del modo de disco de vídeo digital para el
control remoto
Selección del modo auxiliar para el
control remoto
Selección del modo de televisor
para el control remoto
Satélite de emisión digital para el
control remoto
Selección del modo de receptor/
amplificador para el control remoto
Selección del modo de televisor digital para el
control remoto
Selección del modo de televisión por cable
para el control remoto
Botón ASPECT
Cambia el tamaño de la pantalla (consulte la página 46).
R-TUNE
ACERC COMP JUSTO
4 : 3
-
-
-
-
Televisor
Videograbadora
CABLE/DBS
DVD/LD/CD
RECEPTOR
Televisor
Videograbadora
CABLE/DBS
DVD/LD/CD
RECEPTOR
-
Sonido envolvente
-
/+
-
Pausa
-
Pausa
-
-
Parada
-
Parada
-
Minimizar/maximizar la
imagen en imagen
Subida/bajada de canal para imagen
en imagen o pantalla dividida
Subida/bajada de canal
para videograbadora
Subida/bajada de canal
para televisor/DBS
Botones
Aparato
Aparato
PIP MAX
FF
STOP
PIP MIN
REW
PLAY
PAUSE
ButtonsButtons
SEARCH
OPEN/CLOSE
REC
FREEZE
TV/VCR
PIP CH
VCR CH
61
A
C
T
I
O
N
123
456
78
0
9
TV
DTV
CBL
AUX
DVD
VCR
DBS
RCVR
POWER
CH
CH
VOL VOL
PLAY
R-TUNE PROG
GUIDE
RECALL
SAP
PAG EEXIT
PIP SPLIT MOVE SWAP
STOPPAUSE
REC
PIP MAX
FF
PIP MIN
REW
BBE
MENU
FREEZE
TV/VCR
PIP CH
VCR CH
SEARCH
OPEN/CLOSE
M
U
T
E
A
S
P
E
C
T
T
V
/
V
I
D
E
O
L
I
G
H
T
GUIDEPAGEEXIT
Botones de selección directa de
números de programas
Enciende los botones del control
remoto.
El botón seleccionado parpadea
cuando está encendido.
Retorna a la visión normal desde la pantalla MENÚ.
Elemento anterior en MENÚ.
Botón TV/VIDEO
El modo de entrada cambia cada vez que se presiona este botón.
Botón GUIDE
para DBS.
Ubicación de los controles
Botón SAP
Selecciona el modo de audio (consulte la pagina 27).
Subida/bajada de página
para DBS, salto +/- para
DVD y CD.
Cambia imágenes en la pantalla dividida y en la operación de imagen
en imagen (consulte la página 42, 45).
Botón PROG raya
Programa números de canales para DTV y DBS.
PROG
Mueve el cuadro PIP en la operación de imagen en imagen
(consulte la página 43).
Pantalla dividida (consulte la página 44)
Operación de imagen en imagen (consulte la página 42).
RECALL
R-TUNE
Encendido y apagado de la
iluminación del control remoto.
La iluminación del control
remoto se puede encender
y apagar presionando el
botón RECALL mientras se
presiona el botón R-TUNE.
COMPONENTE 2 ENT. DIG.
TV
COMPONENTE 1
VIDEO 3VIDEO 4 VIDEO 1VIDEO 2
A
C
T
I
O
N
CH
CH
VOL VOL
RECALL
BBE
MENU
Reduce el volumen
Mueve el cursor
hacia la izquierda
durante el modo del
menú.
Visualiza el menú
Presione para
acceder a los menús
DTV, DBS o DVD.
Durante el modo del
televisor pulse para
seleccionar BBE VIVA
SÍ o BBE VIVA NO.
Cambia al siguiente canal
inferior
Mueve el cursor hacia abajo
durante el modo del menú.
Aumenta el volumen
Mueve el cursor
hacia la derecha
durante el modo
del menú.
Cambia al siguiente canal superior
Mueve el cursor hacia arriba durante el modo del menú.
Presione para
visualizar la hora,
el canal, el
cronometrados de
apagado y otras
opciones.
ESTEREO SPA MONO
62
To ensure continued excellent performance by this product, periodic cleaning is recommended.
Troubleshooting Chart
Before calling for service, determine the symptoms and follow suggested solutions.
AUDIO
VIDEO
Solutions
Symptoms
Intermittent Remote Control Operation
Cleaning
Snowy Video
Multiple Image
Interference
Normal Video
No Video with
Snow
No Video /
No PIP
No Color
Normal Video
Black Box on
Screen
Normal Video
Noisy Audio
Noisy Audio
Noisy Audio
No Audio
Noisy Audio
No Audio
Normal Audio
Wrong Audio
Normal Audio
Normal Audio
Adjust Antenna Location and Connection
Adjust Antenna Location and Connection
Check Antenna Lead-in Wire
Move Television away from Electrical Appliances,
Lights, Vehicles and Medical Equipment
Increase Volume
Check Mute
Check Television SPEAKERS on/off
Change Channel
Set TV or Cable Mode Properly
Check Antenna Cables
Check Power Cord is Plugged into Active Outlet
Adjust Brightness and Audio Controls
Change Channel
Check Cable Connections
Program the Remote Control Again
Check Second Video Source Operation
Adjust Color Settings
Change Channel
Check Audio Is Set To Stereo or Mono, Not SAP
Change CC (Closed Captioning) from Text Mode
Replace Remote Control Batteries
The unit contains many plastic
parts. For this reason DO NOT use
benzine, thinner or other chemicals
to clean the unit.
DO NOT bring into contact with
insecticide or other volatile
substances.
DO NOT allow the unit to come into
contact for extended periods with
rubber or vinyl products.
Dust will accumulate on the picture
screen. Please wipe with a soft
cloth from time to time. If you use
a chemically treated cloth, please
be careful to follow the instructions
that come with the cloth.
Remove dirt and soiling by wiping with a light
cloth.
Even if the unit is heavily soiled, do not apply
cleaner directly to the unit. Soak a cloth in a
solution of neutral cleanser thinned with
water. Then wring out the cloth, wipe the unit
clean, and finish by wiping with a dry cloth.
Symptoms
VIDEO AUDIO
Solutions
63
AV INPUT 1- 4 VIDEO 1.0 Vp-p (75 Ω)
(Phono Jack Type)
S-VIDEO Y :
1.0 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω)
(Mini DIN 4-pin)
AUDIO L-R 0.5 Vrms
(Phono Jack Type × 2)
AV PROG. OUT VIDEO 1.0 Vp-p (75 Ω)
(Phono Jack Type)
AUDIO L-R 0.5 Vrms
(Phono Jack Type × 2)
TO AUDIO AMP AUDIO L-R 0.5 Vrms
(Phono Jack Type × 2)
COMPONENT VIDEO
Y 1.0 Vp-p (including synchronization)
INPUT1-2 PB / PR ± 0.35 Vp-p
AUDIO L-R 0.5 Vrms
(Phono Jack Type × 2)
DIGITAL
IN INPUT DVI 1.0 24 pin
AUDIO L-R 0.5 Vrms
(Phono Jack Type × 2)
Note:
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
Specifications
Power Source
AC 120 V, 60 Hz
Power Consumption
Average use : 165 W (Maximum Current 3.7 A)
Stand-by condition : 0.2 W
CRT
34-inch, 16 : 9 aspect ratio
Screen Size 29.33 ” (745.0 mm) (W) × 16.50 ” (419.0 mm) (H) × 33.65 ” (854.7 mm) (diagonal)
CT-34WX53
Channel Capability-181
VHF-12 : UHF-56 : Cable-125
Operating Conditions
Temperature : 34 °F - 104 °F (0 ° – 40 °C)
Humidity : 20 % - 80 % (non-condensing)
Connection Terminals
Speaker
2 Speakers
Audio Output
Headphone
M3 (3.5 mm) Jack × 1
Sound
30 W [ 15 W + 15 W ] ( 10 % THD )
FEATURES
Two screen display fuctions 3D Y/C FILTER
BBE VIVA LINEAR PIP
CLOSED CAPTION V-Chip
Accessories Supplied
Remote control Transmitter EUR7603ZD0
AA Battery × 2
Dimensions
( W
××
××
× H
××
××
× D )
35.31 ” (897mm) × 25.35 ” (644 mm) × 23.15 ” (588 mm)
Mass (Weight)
175 lb. (79.5 kg) Net
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this
serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent
record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
Panasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico Inc. (“PSC”)
Ave. 65 de Infanteria, Km 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Printed in Japan
MBS0403O0
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Panasonic CT34WX53 Instrucciones de operación

Panasonic
Marca
Panasonic
Modelo
CT34WX53
Categoría
Equipo de música suplementario
Tipo
Instrucciones de operación
Descargar PDF
informe

en otros idiomas

Artículos relacionados

Otros documentos