5
Before Using Your Kettle
If you are using the kettle for the rst time, it is recommended that you clean your kettle before use by boiling a
full kettle of water twice and then discarding the water.
NOTE: The max capacity of kettle is about 7.2 cups.
Using Your Kettle
1. To ll the kettle, remove it from the power base and open the lid by pressing the button on the lid. Fill with
the desired amount of water. Alternatively, the kettle may be lled through the spout. The water level
should not exceed max marks or sit below MIN water level. Too little water will result in the kettle switching
o before the water has boiled.
NOTE: Do not ll the water over the maximum level, as water may spill out of the spout when boiling.
Ensure that the lid is rmly in place before plugging into the power outlet.
2. Position the kettle on the power base.
3. Connect the plug into a power outlet. Press the switch down, the indicator light will turn on. Then the kettle
will start to boil the water. The kettle will switch o automatically once the water has boiled.
NOTE: Ensure that the switch is free of obstructions and that the lid is rmly closed.
The kettle will not turn o if the switch is constrained or if the lid is opened.
4. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as boiling water will scald.
5. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power base
when not in use.
6 The light ring of the kettle will change as the water temperature increases:
- Purple light below 113°F
- Blue light between 113°F – 140°F
- Green light between 140°F – 167°F
- Yellow light between 167°F – 194°F
- Red Light above 196°F
Boil-Dry Protection
Should you accidentally let the kettle operate without water, the boil-dry protection will automatically switch o
the power. If this occurs, allow the kettle to cool before lling with cold water and re-boiling.
Cleaning And Maintenance
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself.
Any servicing requiring disassembly other than cleaning, must be performed by a qualied appliance repair
technician. Always disconnect the appliance from the power outlet before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture to come in contact with
these parts.
2. Wipe the body of the kettle with a mild, damp cloth or cleaner, never use an abrasive cleaner.
CAUTION: Do not use chemicals, steel wool, wooden or abrasive cleaners to clean the outside of the kettle
to prevent damage to the nish.
Removal Of Mineral Deposits
Your kettle should be periodically descaled as the mineral deposits in tap water may form scale on the bottom of
kettle so as to cause the operation less eciency. You can use the commercially available descaler and follow the
instructions on the package of descaler. Alternatively, you may follow below instructions using the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to the amount so as to cover the bottom of
kettle completely. Leave the solution in the kettle overnight.
2. Then discard the mixture in the kettle, then lling the kettle with clean water to the maximum position,
boiling and then discard the water. Repeat several times until the odor of vinegar has been ushes away.
Any stains remaining inside the spout can be removed by rubbing with a damp cloth.
Note: keep illustration
callouts aligned
17599 17600_BELLA 1.7L Electric Glass Kettle_IM.indd 517599 17600_BELLA 1.7L Electric Glass Kettle_IM.indd 5 2022-07-14 3:15 PM2022-07-14 3:15 PM