Studio SB40

Jamo Studio SB40, SB 40 Manual de usuario

  • ¡Hola! Soy un chatbot de IA específicamente entrenado para ayudarte con el Jamo Studio SB40 Manual de usuario. He revisado el documento y puedo ayudarte a encontrar la información que necesitas o explicarla de manera clara y sencilla. ¡Pregunta lo que necesites!
  • ¿Cómo conectar la barra de sonido a la TV?
    ¿Cómo puedo montar la barra de sonido en la pared?
    ¿Es compatible con la tecnología Bluetooth?
    ¿Cómo puedo cambiar entre las diferentes fuentes de audio?
    ¿Puedo controlar el volumen de la barra de sonido con el mando a distancia del televisor?
    ¿Cuál es el modo de sonido recomendado para ver películas?
    ¿Cómo puedo mejorar la claridad de las voces en los diálogos?
    ¿Cómo puedo restablecer la barra de sonido a su configuración inicial?
4
Mute
Sourdine
Silenciador
Stummschaltung
Disattivazione audio
Desativar áudio
静音
Bluetooth
®
Source Select & Pairing
Sélection de la source Bluetooth® et appariement
Selección y vinculación de fuente Bluetooth
®
Bluetooth®-Quellenwahl und Pairing
Selezione e associazione segnale Bluetooth
®
Seleção e emparelhamento de fonte Bluetooth
®
Bluetooth® 电源选择与配对
Source Select (Toggle)
Sélection de la source (commutation)
Selección de fuente (cíclica)
Quellenwahl (Umschalten)
Selezione segnale (in sequenza ciclica)
Seleção da fonte (Alternar)
电源选择(切换)
Volume Down
Volume bas
Bajada de volumen
Leiser
Riduzione volume
Diminuir o volume
音量减小
Volume Up
Volume haut
Subida de volumen
Lauter
Aumento volume
Aumentar o volume
音量增大
Bluetooth
®
LED (Blue)
DEL Bluetooth (Bleu)
LED de fuente Bluetooth (Azul)
Bluetooth-LED (Blau)
LED segnale Bluetooth (Blu)
LED do Bluetooth (Azul)
蓝牙 LED (蓝色)
Analog LED (Green)
DEL Analogique (Vert)
LED de fuente analógica (Verde)
Analog-LED (Grün)
LED segnale analogico (Verde)
LED analógico (Verde)
模拟 LED 灯 (绿)
Digital Optical LED (Red)
DEL Optique numérique (Rouge)
LED de fuente óptica digital (Rojo)
Digital-optische LED (Rote)
LED segnale ottico digitale (Rosso)
LED ótico digital (Vermelho)
数字光学 LED ()
HDMI LED (White)
DEL HDMI (blanc)
Indicador LED de HDMI (blanco)
HDMI LED (Weiß)
LED HDMI (bianca)
LED HDMI (branco)
HDMI LED (白色)
TV Source LED (White)
DEL Source TV (blanc)
Indicador LED de fuente de TV (blanco)
TV-Quellen-LED (Weiß)
LED segnale TV (bianca)
LED de fonte - TV (branco)
电视电源 LED (白色)
Dolby Digital LED (White)
DEL Dolby Digital (blanc)
LED de Dolby Digital (blanco)
Dolby-Digital-LED (Weiß)
LED segnale Dolby Digital (bianca)
LED Dolby Digital (branco)
杜比数字 LED (白色)
Virtual Surround Mode LED (White)
DEL Mode ambiophonique virtuel (blanc)
LED de modalidad de surround virtual (blanco)
LED Virtueller Surroundmodus (Weiß)
LED modalità surround virtuale (bianca)
LED do modo surround virtual (branco)
虚拟环绕声模式 LED (白色)
Dialog Enhance Mode LED (White)
DEL Mode d’égalisation d’accentuation vocale (blanc)
LED de modalidad de ecualización de mejoramiento de voz (blanco)
LED EQ-Modus für verbesserte Stimmen (Weiß)
LED modalità equalizzatore potenziamento vocale (bianca)
LED do modo de EQ de melhoria de voz (branco)
音效增强均衡器模式 LED (白色)
Night Mode LED (White)
DEL Mode nocturne (blanc)
LED de modalidad nocturna (blanco)
Nachtmodus-LED (Weiß)
LED modalità notturna (bianca)
LED do modo noturno (branco)
夜间模式 LED (白色)
 ®Bluetooth
®Bluetooth 
   DOLBY DIGITALLED
 HDMI
  
6
CONNECTIONS - HDMI-ARC
Sound Bar
TV
Optical
Digital Audio Out
HDMI-ARC
HDMI OUT/TV
HDMI
1
2
3
4
5
6
Sound Bar
TV
3
4
1
2
Sound Bar
TV
3
4
2
Headphone
Audio Out
R
L
1
OR
*
CONNEXIONS - HDMI-ARC • CONEXIONES - HDMI-ARC • ANSCHLÜSSE – HDMI-ARC • CONNESSIONI - HDMI-ARC • CONEXÕES - HDMI-ARC • 连接 – HDMI-ARC •
A Basic TV HDMI input will not
transfer the TV audio signal to
the Sound Bar. The JAMO 40
Soundbar will only receive TV
audio through HDMI-ARC (with
CEC turned ON), Optical or
Analog connection.
Une entrée TV HDMI de base
ne transférera pas le signal
audio TV vers la Barre de Son.
La barre de son JAMO 40 ne
recevra l’audio TV qu’au moyen
d’une connexion HDMI-ARC
(avec CEC sur MARCHE (ON)),
Optique ou Analogique.
Una entrada básica de HDMI
de una TV no transfiere la
señal de audio de la TV a la
barra de sonido. La Barra de
Sonido JAMO 40 solo recibirá
el audio de la TV a través de
una conexión óptica o análoga
de tipo HDMI-ARC (con el CEC
encendido).
Ein einfacher HDMI-Eingang
kann das TV-Audiosignal nicht
an die Sound Bar übertragen.
Die JAMO 40 Soundbar kann
das das TV-Audiosignal
nur über HDMI-ARC (bei
aktiviertem CEC), eine
optische oder analoge
Verbindung empfangen.
Il normale input televisivo
HDMI non permette di
trasmettere i segnali audio
televisivi alla soundbar. La
Sound Bar JAMO 40 riceve
i segnali audio televisivi
soltanto dai connettori HDMI-
ARC (con CEC impostata su
ON), ottici o analogici.
Uma entrada HDMI TV básica
não transfere o sinal de áudio
da TV para a Barra de Som. A
Barra de Som JAMO 40 recebe
áudio da TV somente através
de uma conexão HDMI-ARC
(com CEC ligado), óptica ou
analógica.
一个基本的电视 HDMI 输
入端不会将电视音频信号
传送到声霸扬声器。JAMO
40 声霸扬声器只能通
过 HDMI-ARC (CEC 打
开状态下)接收 电视音
频、光学或类比信号。
HDMI


JAMO 40
HDMI-ARC
CECHDMI


(HDMI)HDMI ARC
12
Solid
Continu
Continuo
Dauerhaft
Luce fissa
Constante
常亮
Flashing
Clignotant
Destello
Blinkt
Lampeggiante
Intermitente
闪烁
2
3
Hold 3 Seconds (Sub)
Appuyer pendant 3 secondes
Mantenga oprimido durante 3 segundos
3 Sekunden gedrückt halten
Tenere premuto per 3 secondi
Manter pressionado por 3 segundos
保持 3
1
4
SUBWOOFER RECONNECT
RECONNECTER • RECONECTAR • ERNEUT VERBINDEN • RICONNESSIONE • RECONECTAR • 重新连接 
3


Hold 10 Seconds Sound Bar
Appuyer pendant 10 secondes
Mantenga oprimido durante 10 segundos
10 Sekunden gedrückt halten
Tenere premuto per 10 secondi
Manter pressionado por 10 segundos
保持 10 秒
10
14
Bluetooth
®
Source Select
Sélection de la source
Bluetooth
®
Selección de fuente
Bluetooth
®
Bluetooth
®
-Quellenwahl
Selezione segnale
Bluetooth
®
Seleção de fonte
Bluetooth
®
蓝牙源选择
On / Off
Sous tensio / Hors tension
Encendido / Apagado
Ein / Aus
Acceso / Spento
Ligar / Desligar
开/关
LEDs On/Off (Soundbar)
Volume haut - Caisson de graves
Subida de volumen - Subwoofer
Lauter - Subwoofer
Aumento volume - Subwoofer
Aumentar o volume- Subwoofer
音量增大
Analog Source Select
Sélection de la source analogique
Selección de fuente analógica
Analog-Quellenwahl
Selezione segnale analogico
Seleção de fonte analógica
模拟源选择
Digital Optical Source Select
Sélection de la source optique numérique
Selección de fuente óptica digital
Digital-optische Quellenwahl
Selezione segnale ottico digitale
Seleção de fonte ótica digital
数字光学源选择
TV Source Select
Sélection de la source TV
Selección de fuente Televisor
TV-Quellenwahl
Selezione segnale TV
Seleção de fonte TV
电视源选择
Track Backward
Reculer
Retroceso de pista
Voriger Titel
Brano precedente
Retroceder
快退
Play/Pause
Lecture/pause
Reproducción/pausa
Wiedergabe/Pause
Riproduzione / Pausa
Reproduzir/Pausar
播放/暂停
Track Foward
Avancer
Avance de pista
Nächster Titel
Brano successivo
Avançar
快进
Subwoofer Level Down
Volume bas - Caisson de graves
Bajada de volumen - Subwoofer
Leiser - Subwoofer
Riduzione volume - Subwoofer
Diminuir o volume - Subwoofer
音量减小
Subwoofer Level Up
Volume haut - Caisson de graves
Subida de volumen - Subwoofer
Lauter - Subwoofer
Aumento volume - Subwoofer
Aumentar o volume- Subwoofer
音量增大
System Volume Up
Volume haut
Subida de volumen
Lauter
Aumento volume
Aumentar o volume
音量增大
Mute
Sourdine
Silenciador
Stummschaltung
Disattivazione audio
Desativar áudio
静音
System Volume Down
Volume bas
Bajada de volumen
Leiser
Riduzione volume
Diminuir o volume
音量减小
Dialog Enhance Mode On/Off
Marche/Arrêt Mode d’égalisation d’accentuation vocale
Activación/desactivación de ecualización de mejoramiento de voz
EQ-Modus für verbesserte Stimmen Ein/Aus
Equalizzatore potenziamento vocale On/Off
Ativar/desativar o modo de EQ de melhoria de voz
音效增强均衡器开/
Virtual Surround Mode On/Off
Marche/Arrêt Mode ambiophonique virtuel
Activación/desactivación de modalidad de surround virtual
Virtueller Surroundmodus Ein/Aus
Modalità surround virtuale On/Off
Ativar/desativar o modo surround virtual
虚拟环绕声模式开/
Night Mode On/Off
Marche/Arrêt Mode nocturne
Activación/desactivación de modalidad nocturna
Nachtmodus Ein/Aus
Modalità notturna On/Off
Ativar/desativar o modo noturno
夜间模式开/
HDMI Source Select
Sélection de la source HDMI
Selección de fuente HDMI
HDMI Quellenwahl
Selezione segnale HDMI
Seleção de fonte HDMI
HDMI 源选择

®
Bluetooth
   

 
HDMI
  

15
SURROUND MODES
MODES AMBIOPHONIQUES • MODALIDADES SURROUND • SURROUND-MODI • MODALITÀ SURROUND • MODOS SURROUND • 环绕声模式
VIRTUAL SURROUND MODE
• Jamo Custom DSP
• Independent of the EQ settings
(Natural, Voice, Night)
• Can be ON regardless of Dolby Digital status
MODE AMBIOPHONIQUE VIRTUEL
• DSP personnalisé de Jamo
• Indépendant des réglages d’égaliseur
(Naturel, accentuation vocale, nocturne)
• Peut être en marche indépendamment du statut Dolby Digital
MODALIDAD DE SURROUND VIRTUAL
• Procesador de Señal Digital (Digital Signal Processor, DSP) personalizado
de Jamo
• Independiente de las configuraciones de ecualización (natural,
mejoramiento de voz, nocturna)
• Puede estar activa independientemente del estado de Dolby Digital
DIALOG ENHANCE MODE
• Optimizes EQ for Dialog
• Can be ON regardless of Dolby Status or
Virtual Surround Mode
• Only one EQ profile active at one time
(Natural, Dialog Enhanced, or Night)
MODE D’ÉGALISATION D’ACCENTUATION VOCALE
• Optimise l’égalisation pour les dialogues
• Peut être en marche indépendamment du statut Dolby Digital
• Seulement un profile d’égalisation actif à la fois (Naturel, accentuation
vocale ou nocturne)
MODALIDAD DE ECUALIZACIÓN DE
MEJORAMIENTO DE VOZ
• Optimiza la ecualización para el diálogo
• Puede estar activa independientemente del estado de Dolby Digital
• Puede haber solo un perfil de ecualización activo a la vez (natural,
mejoramiento de voz, nocturno)
NIGHT MODE
• Reduces Dynamic Range
• Subwoofer OFF
• Can be ON regardless of Dolby Status or
Virtual Surround Mode
• Only one EQ profile active at one time
(Natural, Voice Enhanced, or Night)
MODE NOCTURNE
• Réduit la gamme dynamique
• Haut-parleur d’extrêmes graves désactivé
• Peut être en marche indépendamment du statut Dolby Digital
• Un seul profile d’égalisation actif à la fois
(Naturel, accentuation vocale ou nocturne)
MODALIDAD NOCTURNA
• Reduce el rango dinámico
• Subwoofer APAGADO
• Puede estar activa independientemente del estado de Dolby Digital
• Puede haber solo un perfil de ecualización activo a la vez (natural,
mejoramiento de voz, nocturno)
NIGHT
DIALOG
LED
TV
DIGITAL
ANALOG
HDMI
1
2
3
NIGHTDIALOG
HDMI
LED
TV
DIGITAL
ANALOG
1
2
3
SUB
SUB
NIGHT
DIALOG
LED
TV
DIGITAL
ANALOG
HDMI
1
2
3
NIGHTDIALOG
HDMI
LED
TV
DIGITAL
ANALOG
1
2
3
SUB
SUB
• Activa solo cuando hay señal Dolby Digital
• Actif seulement avec réception d’un
signal Dolby Digital
• Only active if receiving a
Dolby
®
Digital signal
• Manufactured under
license from Dolby Lab-
oratories. Dolby, Dolby
Audio and the double-D
symbol are trademarks
of Dolby Laboratories

1919
LED ON/OFF
DEL MARCHE/ARRÊT • ENCENDIDO/APAGADO DE INDICADORES LED • LED AN/AUS • LED ACCESO/SPENTO • LED LIGA/DESLIGA • LED 灯开/
ANALOG DIGITAL SUR
NIGHTDIALOGTVHDMI
ANALOG DIGITAL SUR
NIGHTDIALOGTVHDMI
ON
OFF
Press x1
Press x1
Appuyer 1 fois
Oprima 1 vez
1x drücken
Premere 1 volta
Pressionar uma vez
按 1 次
ON / OFF
Sous tensio / Hors tension
Encendido / Apagado
Ein / Aus
Acceso / Spento
Ligar / Desligar
开/关
NOTE: LEDs will turn off after 5 seconds of inactivity
REMARQUE : Les DEL s’éteindront après 5 secondes d’inactivité
NOTA: Los indicadores LED se apagan después de 5 segundos de inactividad
HINWEIS: LEDs schalten sich nach 5 Sekunden Inaktivität aus
NOTA: i LED si spegneranno dopo 5 secondi di inattività.
OBSERVAÇÃO: Os LEDs desligarão depois de 5 segundos de inatividade
注意: LED 灯休止 5 秒之后将关闭。

5

21
ANALOG DIGITAL SUR
NIGHTDIALOGTVHDMI
ANALOG DIGITAL SUR
NIGHTDIALOGTVHDMI
ANALOG DIGITAL SUR
NIGHTDIALOGTVHDMI
2
Current Source Flashes
1
Hold Mute 3 seconds
4
Current Source Turns Off
6
Current Source Flashes x3
7
Current Source Solid
12 in. (25cm)
1 2 3
4 5 6
7 8
0
Mute
ChVol
9
Press Volume Up x1
5
Press x1 to Program
3
TV Remote
Cable Remote
ANALOG DIGITAL SUR NIGHTDIALOGTVHDMI
TV REMOTE PROGRAMMING
PROGRAMMATION À DISTANCE DU TÉLÉVISEUR • PROGRAMACIÓN DEL CONTROL REMOTO DEL TELEVISOR • PROGRAMMIEREN DER TV-FERNBEDIENUNG • PROGRAMMAZIONE CON IL TELECOMANDO TV • PROGRAMAÇÃO DO CONTROLE REMOTO DA TV 电视机遥控器编程
**
*
*
*
*
**
If you want to use the TV
remote to control the soundbar,
you can program the soundbar
to take commands from your
TV remote
Si vous souhaitez utiliser la télécommande du
téléviseur pour contrôler la barre de son, vous
pouvez programmer la barre de son pour recevoir
des commandes depuis votre télécommande TV.
Si desea controlar la barra de sonido con el control
remoto del televisor, puede programar la barra de
sonido para que acepte los comandos del control
remoto del televisor.
Wenn Sie die Soundbar mit der TV-Fernbedienung
kontrollieren wollen, können Sie diese darauf
programmieren, Befehle von Ihrer TV-Fernbedienung
zu empfangen.
Se si desidera usare il telecomando del televisore
per controllare il SoundBar, è possibile programmare
appropriatamente il SoundBar.
É possível programar a barra de som para aceitar os
comandos do controle remoto da TV.
如果您想要使用电视遥控器控制条形音
箱,则可将条形音箱编程为从电视摇控器
接收命令。




22
To program Volume Down and Mute buttons repeat the steps shown and replace steps 3 and 5 with the button you want to program.
Pour régler les boutons de Volume bas et de Sourdine, répéter les étapes indiquées et remplacez les étapes 3 et 5 par le bouton que vous souhaitez programmer.
Para programar los botones de bajada de volumen y de silenciador, repita los pasos indicados y sustituya el botón de los pasos 3 y 5 por el botón que desea programar.
Um die Leiser- und Stummschaltungs-Tasten zu programmieren, die gezeigten Schritte wiederholen und Schritte 3 und 5 mit der zu programmierenden Taste ersetzen.
Per programmare i pulsanti Riduzione volume e Silenziamento, ripetere i passaggi illustrati e sostituire i passaggi 3 e 5 con il pulsante che si desidera programmare.
Para programar os botões de diminuir o volume e desligar o áudio, repita os passos indicados e substitua as etapas 3 e 5 com o botão que deseja programar.
要对“调低音量” (-) 与“静音”按钮进行编程,请重复所示步骤,然后用您想编程的按钮替换第 3 步和第 5 步。
Only Source LEDs active at the time will be effected
Seules les DEL de sources actives à ce moment seront affectées
Se efectúan solo las funciones de los indicadores LED activos en el momento
Betrifft nur die momentan aktiven Quell-LEDs
Solo i LED del segnale attivi al determinato istante segnaleranno
Somente os LEDs das fontes ativos no momento serão afetados
*只有当时有效的源 LED 灯将受影响。
**
*
Hold Mute 3 Seconds
Appuyer sur la Sourdine pendant 3 secondes
Mantenga oprimido el silenciador durante 3 segundos
Stummschaltung 3 Sekunden gedrückt halten
Tenere premuto il pulsante Silenziamento per 3 secondi
Manter pressionado o botão desligar áudio por 3 segundos
按住“静音”按钮 3 秒钟
Current Source Flashes
La source active clignote
La fuente activa destella
Aktuelle Quelle blinkt
La sorgente in funzione lampeggia
A fonte atual piscará
当前源闪烁
Press x1 to Program
Appuyer 1 fois pour programmer
Oprima una vez para programar
1x drücken, um zu programmieren
Press una volta per programmare
Pressionar uma vez para programar
按一次进行编程
Current Source Turns Off
La source active s’éteint
La fuente activa se apaga
Aktuelle Quelle abgeschaltet
La sorgente si disinserisce
A fonte atual desligará
当前源关闭
22
Press Volume Up x1
Appuyer sur Volume haut 1 fois
Oprima la subida de volumen una vez
Lauter-Taste 1x drücken
Premere una volta il pulsante di aumento volume
Pressionar uma vez o botão Volume +
按“调高音量” (+) 按钮一次
Current Source Flashes x3
La source active clignote 3 fois
La fuente activa destella 3 veces
Aktuelle Quelle blinkt 3x
La sorgente in funzione lampeggia tre volte
A fonte atual piscará 3 vezes
当前源闪烁 3
Current Source Solid
Source active continue
La fuente activa brilla fijamente
Aktuelle Quelle leuchtet dauerhaft
La spia della sorgente in funzione rimane accesa
Fonte atual acesa
当前源常亮
1 2 3 4
5 6 7
3

53

3

  
23
CARE AND CLEANING
FACTORY RESET
ANALOG DIGITAL SUR NIGHTDIALOGTVHDMI
ANALOG DIGITAL SUR NIGHTDIALOGTVHDMI
ENTRETIEN ET NETTOYAGE • CUIDADO Y LIMPIEZA • PFLEGE UND REINIGUNG • CURA E PULIZIA • CUIDADOS E LIMPEZA • 保养与清洁
RÉINITIALISATION • RESTABLECIMIENTO DE FÁBRICA • RÜCKSETZUNG AUF WERKSEINSTELLUNG • RIPRISTINO IMPOSTAZIONI DI FABBRICA • RESTABELECIMENTO DAS CONFIGURAÇÕES DE FÁBRICA • 恢复出厂设置
Hold 10 seconds
Hold 10 Seconds
Appuyer pendant 10 secondes
Mantenga oprimido durante 10 segundos
10 Sekunden gedrückt halten
Tenere premuto per 10 secondi
Manter pressionado por 10 segundos
保持 10 秒
Clears
Bluetooth
®
pairing history and user programmed IR commands
Efface l’historique d’appariement
Bluetooth
®
et les commandes IR programmées par l’utilisateur
Borra el historial de sincronización de
Bluetooth
®
y los comandos programados por el usuario
Löscht Bluetooth®-Kupplungsdaten und benutzerprogrammierte IR-Befehle
Vengono cancellati la cronologia delle associazioni
Bluetooth
®
e i comandi programmati dall’utente sul telecomando a infrarossi
Limpa o histórico de pareamento
Bluetooth
®
e os comandos de IR programados pelo usuário
清除蓝牙® 配对历史记录及用户编程的 IR 指令。


10
IR
®
Bluetooth
24
TROUBLESHOOTING
DÉPANNAGE • DETECCIÓN • HINWEISE ZUR PROBLEMBEHEBUNG • SOLUZIONE DEI PROBLEMI • SOLUCIONAR PROBLEMAS • 故障排除

jamo.com/studioSB40

For more in-depth information and troubleshooting instructions visit jamo.com/studioSB40
For more in-depth information and troubleshooting instructions visit jamo.com/studioSB40
Hay información más detallada e instrucciones de detección y reparación de averías en jamo.com/studioSB40
Detailliertere Anweisungen und Hinweise zur Problembehebung finden Sie unter jamo.com/studioSB40
Per informazioni più dettagliate e istruzioni per la soluzione dei problemi, visitare jamo.com/studioSB40
Para obter informações mais detalhadas e instruções para solucionar problemas, visite o site jamo.com/studioSB40
欲了解更详细的信息和故障排除说明,请访问 jamo.com/studioSB40
1/28