Yamaha RX-V479 El manual del propietario

Categoría
Receptores AV
Tipo
El manual del propietario

Este manual también es adecuado para

AV Receiver
Owner’s Manual
Read the supplied booklet Safety Brochure before using the unit.
English
00_RX-V479_V579_om_U.book Page 1 Wednesday, March 25, 2015 9:59 AM
En 2
CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
FEATURES 5
What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PREPARATIONS 11
General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.1-channel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7.1-channel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting front speakers that support bi-amp connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting Zone B speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Connecting to the jack on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5 Connecting the FM/AM antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6 Preparing for connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
8 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 27
9 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . . 28
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
10 Connecting to a network wirelessly . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Selecting the connection method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Connecting the unit to a wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Connecting a mobile device to the unit directly (Wireless Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
PLAYBACK 42
Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Selecting the input source and favorite settings with one touch
(SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Selecting a registered scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Enjoying stereoscopic sound fields (CINEMA DSP 3D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Enjoying pure high fidelity sound (direct playback) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Enhancing the bass (Extra Bass) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . .48
Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Setting the frequency steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Registering favorite radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Playing back music via BLUETOOTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Playback BLUETOOTH device music on the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Playback of iPod content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
00_RX-V479_V579_om_U.book Page 2 Wednesday, March 25, 2015 9:59 AM
En 3
Playing back music with AirPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 59
Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 62
Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Playback of Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Registering favorite Internet radio stations (bookmarks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Playing back music in multiple rooms (RX-V579 only) . . . . . . . . . . . . . 68
Connecting Zone B speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Operating the Zone B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Useful functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Registering favorite items (shortcut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Configuring playback settings for different playback sources
(Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CONFIGURATIONS 76
Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . . 76
Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Configuring the system settings (ADVANCED SETUP menu) . . . . . . . . 96
ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Changing the speaker impedance setting (SP IMP.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Selecting the remote control ID (REMOTE ID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Changing the FM/AM tuning frequency setting (TU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Restoring the default settings (INIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Updating the firmware (UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Updating the unit’s firmware via the network . . . . . . . . . . . . . . . . . . . . 99
APPENDIX 100
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
BLUETOOTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Network information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Yamaha technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Supported devices and file formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Audio Return Channel (ARC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
00_RX-V479_V579_om_U.book Page 3 Wednesday, March 25, 2015 9:59 AM
En 4
Accessories
Check that the following accessories are supplied with the product.
Remote control Batteries (AAA, R03, UM-4) (x2)
AM antenna FM antenna
*One of the above is supplied depending on the region of
purchase.
YPAO microphone
CD-ROM (Owner’s Manual)
Easy Setup Guide
Safety Brochure
Insert the batteries the right
way round.
Operating range of the remote control
Point the remote control at the remote control sensor on the unit and remain within the operating range
shown below.
The illustrations of the main unit used in this manual are of the RX-V579 (U.S.A. model), unless
otherwise specified.
Some features are not available in certain regions.
Due to product improvements, specifications and appearance are subject to change without notice.
This manual explains operations using the supplied remote control.
This manual describes all the “iPod” and “iPhone” as the “iPod”. “iPod” refers to both “iPod” and
“iPhone” unless otherwise specified.
indicates precautions for use of the unit and its feature limitations.
indicates supplementary explanations for better use.
30° 30°
Within 6 m (20 ft)
00_RX-V479_V579_om_U.book Page 4 Wednesday, March 25, 2015 9:59 AM
En 5
FEATURES
What you can do with the unit
AV receiver (the unit)
Speakers
BD/DVD player
HDMI Control
Audio/Video
TV remote control
Audio
HDMI Control
Audio
Audio/Video
TV
Sequential operation of a TV,
AV receiver, and BD/DVD
player (HDMI Control)
. p.114
Change the input source
and favorite settings with
one touch (SCENE)
. p.43
**
* RX-V579 only
Wide variety of supported content
• iPod/iPhone
. p.54
•USB
. p.59
• Media server (PC/NAS)
. p.62
• Internet radio
. p.65
•AirPlay
. p.57
• BLUETOOTH
. p.53
BLUETOOTH
device
USB device
Audio
Network contents
Supports 2- to 5.1-channel (to 7.1-channel*)
speaker system. Allows you to enjoy your favorite
acoustic spaces in various styles.
• Automatically optimizing the speaker
settings to suit your room (YPAO)
. p.28
• Reproducing stereo or multichannel
sounds with the sound fields like
actual movie theaters and concert
halls (CINEMA DSP)
. p.45
• Enjoying compressed music with
enhanced sound (Compressed Music
Enhancer)
. p.48
• Playing back music in multiple rooms
(Zone B)*
. p.68
4K Ultra HD
signal and
HDCP 2.2
supported
Wireless connection to a
network
. p.25
00_RX-V479_V579_om_U.book Page 5 Wednesday, March 25, 2015 9:59 AM
En 6
Full of useful functions!
Connecting various devices (p.21)
A number of HDMI jacks and various input/output jacks
on the unit allow you to connect video devices (such as
BD/DVD players), audio devices (such as CD players),
game consoles, portable audio player, and other
devices.
Playing back TV audio in surround sound
with a single HDMI cable connection
(Audio Return Channel: ARC) (p.19)
When using an
ARC
-compatible TV, you only need one
HDMI
cable to enable video output to the TV, audio input
from the TV, and the transmission of
HDMI
Control
signals.
Creating 3-dimensional sound fields (p.45)
The Virtual Presence Speaker (VPS) function and Virtual
Surround Back Speaker (VSBS) function (RX-V579 only)
allow you to create a 3-dimensional sound field that
spreads up and deep in your own room (CINEMA DSP
3D).
Surround playback with 5 speakers placed
in front (p.46)
You can enjoy the surround sound even when the
surround speakers are placed in front.
Enjoying pure high fidelity sound (p.48)
When the direct playback mode is enabled, the unit
plays back the selected source with the least circuitry,
which lets you to enjoy Hi-Fi sound quality.
Low power consumption
The ECO mode (power saving function) reduces the
unit’s power consumption and helps to create an
eco-friendly home theater system (p.89).
About
AV SETUP GUIDE
Application for tablets AV SETUP GUIDE
AV SETUP GUIDE is an application that
assists you with cable connections
between AV receiver and source
devices as well as AV receiver setup.
This app guides you through the various
settings such as speaker connections,
TV and source device connections and
assigning the power amp.
Functions:
1) Connection support guide
Speaker connection
TV/source devices connection
2) Setup support guide
Automatic network setup of HDMI, power amp
assign, etc.
Various setup assistance with illustrations.
YPAO setting guidance
3) View owner’s manual
* This application is for tablets only.
For details, search for “AV SETUP GUIDE” on the App
Store or Google Play.
About
AV CONTROLLER
Application for smartphone / tablets AV
CONTROLLER
AV CONTROLLER provides you the
flexibility to control the available inputs,
volume, mute and power commands. It
lets users change a song from Internet
Radio, USB and command FM/AM
tuners or any other internally available
source.
Functions:
Power on/off
Volume up/down
–Mute
Music Play
Input Selection
DSP Mode Selection
SCENE selection
Blu-ray player fundamental control
Seamless control between the Yamaha AV receiver
and Blu-ray player
Demo mode - Explains how to use this app
For details, search for “AV CONTROLLER” on the App
Store or Google Play.
00_RX-V479_V579_om_U.book Page 6 Wednesday, March 25, 2015 9:59 AM
En 7
Front panel
1 z (power) key
Turns on/off (standby) the unit.
2 Standby indicator
Lights up when the unit is in standby mode under any of the
following conditions.
HDMI Control is enabled (p.84)
Standby Through is enabled (p.84)
Network Standby is enabled (p.93)
An iPod is being charged (p.54)
3 YPAO MIC jack
For connecting the supplied YPAO microphone (p.28).
4 Remote control sensor
Receives remote control signals (p.4).
5 INFO (WPS) key
Selects the information displayed on the front display (p.71).
Enters the wireless LAN connection setup (WPS button
configuration) by holding down for 3 seconds (p.35).
6 MEMORY key
Registers FM/AM radio stations as preset stations (p.50).
7 PRESET keys
Select a preset FM/AM radio station (p.51).
8 FM and AM keys
Switch between FM and AM (p.49).
9 TUNING keys
Select the radio frequency (p.49).
0 Front display
Displays information (p.8).
A DIRECT key
Enables/disables the direct playback mode (p.48).
B PHONES jack
For connecting headphones.
C INPUT keys
Select an input source.
D TONE CONTROL key
Adjusts the high-frequency range and low-frequency range
of output sounds (p.73).
E SCENE keys
Select the registered input source and sound program with
one touch. Also, turns on the unit when it is in standby mode
(p.43).
F PROGRAM keys
Select a sound program or a surround decoder (p.44).
G STRAIGHT key
Enables/disables the straight decode mode (p.47).
H AUX jack
For connecting devices, such as portable audio players
(p.24).
I USB jack
For connecting a USB storage device (p.59) or an iPod
(p.54).
J VOLUME knob
Adjusts the volume.
Part names and functions
PROGRAM
TONE CONTROL
STRAIGHT
(CONNECT)
AUX
AUDI O
5V 1A
SCENE
INPUT
PHONES
SILENT CINEMA
YPAO MIC
MEMORY
INFO (WPS)
PRESET
FM AM TUNING
DIRECT
VOLUME
TV
BD
DVD
NET
RADIO
b cdfgheaji k
lmnoprstq
00_RX-V479_V579_om_U.book Page 7 Wednesday, March 25, 2015 9:59 AM
En 8
Front display (indicators)
1 HDMI
Lights up when HDMI signals are being input or output.
OUT
Lights up when HDMI signals are being output.
2 ENHANCER
Lights up when Compressed Music Enhancer (p.48) is
working.
3 CINEMA DSP
Lights up when CINEMA DSP (p.45) or CINEMA DSP 3D
(p.45) is working.
4 STEREO
Lights up when the unit is receiving a stereo FM radio signal.
TUNED
Lights up when the unit is receiving an FM/AM radio station
signal.
5 BLUETOOTH indicator
Light up while the unit is connecting to a BLUETOOTH
device.
6 SLEEP
Lights up when the sleep timer is on.
7 MUTE
Blinks when audio is muted.
8 Volume indicator
Indicates the current volume.
9 ECO
Lights up when the eco mode (p.89) is enabled.
0 Cursor indicators
Indicate the remote control cursor keys currently operational.
A Information display
Displays the current status (such as input name and sound
mode name). You can switch the information by pressing
INFO (p.71).
B Signal strength indicator
Indicates the strength of the wireless signal (p.32).
C ZONE indicators (RX-V579 only)
Indicate the zone to which the sound is output (p.69).
D Speaker indicators
Indicate speaker terminals from which signals are output.
A Front speaker (L)
S Front speaker (R)
D Center speaker
F Surround speaker (L)
G Surround speaker (R)
H Surround back speaker (L)*
J Surround back speaker (R)*
K Surround back speaker*
L Subwoofer
* RX-V579 only
E ADAPTIVE DRC
Lights up when Adaptive DRC (p.73) is working.
1 2
PARTY
VIRTUAL
23
CHARGE
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
ADAPTIVE DRC
ZONE
A
ZONE
B
a
bc d
fg h
e
ji ljkmno
00_RX-V479_V579_om_U.book Page 8 Wednesday, March 25, 2015 9:59 AM
En 9
Rear panel
1 ANTENNA jacks
For connecting to FM and AM antennas (p.24).
2 HDMI OUT jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.19). When using ARC, TV audio signal
can also be input through the HDMI OUT jack.
3 HDMI 1–6 jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.21).
4 NETWORK jack
For a wired connection to a network (p.25).
5 Wireless antenna
For a wireless (Wi-Fi) connection to a network (p.25).
6 Power cable
For connecting to an AC wall outlet (p.26).
7 AV jacks
AUDIO jacks (RX-V479)
For connecting to video/audio playback devices and
inputting video/audio signals (p.21).
The COMPONENT jacks are available on RX-V579 only.
8 MONITOR OUT jacks
For connecting to a TV and outputting video signals (p.19).
The COMPONENT jacks are available on RX-V579 only.
9 SUBWOOFER PRE OUT jack
For connecting to a subwoofer (with built-in amplifier) (p.16).
(RX-V579 only)
You can connect 2 subwoofers (with built-in amplifier) to the
unit.
0 SPEAKERS terminals
For connecting to speakers (p.16).
The SURROUND BACK/BI AMP/ZONE B jacks are available on
RX-V579 only.
A VOLTAGE SELECTOR
(Taiwan and General models only)
Selects the switch position according to your local voltage
(p.26).
ab cd f
gh
e
ji k
* The area around the video/audio output jacks is
marked in white on the actual product to prevent
improper connections.
(RX-V579 U.S.A. model)
00_RX-V479_V579_om_U.book Page 9 Wednesday, March 25, 2015 9:59 AM
En 10
Remote control
1 Remote control signal transmitter
Transmits infrared signals.
2 SLEEP key
Switches the unit to standby mode automatically after a
specified period of time has elapsed (sleep timer). Press
repeatedly to set the time (120 min, 90 min, 60 min, 30 min,
off).
3 ZONE switch (RX-V579 only)
Enable/disable the audio output to Zone A or Zone B (p.69).
4 SCENE keys
Select the registered input source and sound program with
one touch. Also, turn on the unit when it is in standby mode
(p.43).
5 Sound mode keys
Select a sound mode (p.44).
6 Input selection keys
Select an input source for playback.
You can select directly each input source by pressing the
following keys.
FM/AM FM/AM radio
USB USB jack (on the front panel)
NET SERVER, NET RADIO, AirPlay and network
sources (press repeatedly to select a desired
source)
BLUETOOTH BLUETOOTH device
7 SETUP key
Displays the setup menu (p.76).
8 Menu operation keys
Cursor keys Select a menu or a parameter.
ENTER Confirms a selected item.
RETURN Returns to the previous screen.
890 External device operation keys
Let you perform playback operations when “USB” or “NET”
is selected as the input source, or control playback of the
HDMI Control-compatible playback device.
The playback devices must support HDMI Control. However,
Yamaha does not assure the operation of all HDMI
Control-compatible devices.
You can assign the unit's functions to the RED/GREEN/
YELLOW/BLUE keys (p.91).
0 Radio keys
Operate the FM/AM radio when “TUNER” is selected as the
input source (p.49).
MEMORY Registers FM/AM radio stations as presets.
PRESET Select a preset station.
TUNING Select the radio frequency.
A z (receiver power) key
Turns on/off (standby) the unit.
B VOLUME keys
Adjust the volume.
C MUTE key
Mutes the audio output.
D OPTION key
Displays the option menu (p.72).
TUNING
PRESET
MUTE
TUNING
MEMORY
BLUE
YELLOWGREEN
RED
TOP MENU HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
ENTER
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ZONE A ZONE B
DIRECT ENHANCER BASS
NET
BLUETOOTH
INPUT
BD
DVD
TV
NET
SCENE
RADIO
SLEEP
b
c
d
f
g
e
a
i
k
l
m
n
j
h
(RX-V579)
00_RX-V479_V579_om_U.book Page 10 Wednesday, March 25, 2015 9:59 AM
En 11
PREPARATIONS
This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!
General setup procedure
1 Placing speakers (p.12)
Select the speaker layout for the number of speakers that you are using and place them in your room.
2 Connecting speakers (p.16)
Connect the speakers to the unit.
3 Connecting a TV (p.19)
Connect a TV to the unit.
4 Connecting playback devices (p.21)
Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.
5 Connecting the FM/AM antennas (p.24)
Connect the supplied FM/AM antennas to the unit.
6
Preparing for connecting to a network
(p.25)
Connect the unit to a network with a commercially-available network cable.
7 Connecting the power cable (p.26)
After all the connections are complete, plug in the power cable.
8
Selecting an on-screen menu language
(p.27)
Select the desired on-screen menu language.
9
Optimizing the speaker settings
automatically (YPAO) (p.28)
Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room
(YPAO).
10 Connecting to a network wirelessly (p.32)
Connect the unit to a network wirelessly.
00_RX-V479_V579_om_U.book Page 11 Wednesday, March 25, 2015 9:59 AM
En 12
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout
examples.
*1 RX-V579 only
*2 Place the surround speakers in front and set “Virtual CINEMA FRONT” (p.82) in the “Setup” menu to “On”.
RX-V579 supports 2- to 7.1-channel system, and RX-V479 supports 2- to 5.1-channel speaker system.
(RX-V579 only)
You can connect two subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds.
1 Placing speakers
Caution
(U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” (p.15).
(Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 Ω.
Use a subwoofer with built-in amplifier.
Be sure to connect the front left and right speakers.
Speaker type Abbr. Function
Speaker system (the number of channels)
7.1*
1
6.1*
1
5.1
5.1
(Virtual
CINEMA
FRONT)
4.1 3.1 2.1
Front (L) 1
Produce front left/right channel sounds (stereo sounds).
●●●●●●●
Front (R) 2 ●●●●●●●
Center 3 Produces center channel sounds (such as movie dialogue and vocals). ●●●●
Surround (L) 4
Produce surround left/right channel sounds.
●●●
*
2
Surround (R) 5 ●●●
*
2
Surround back (L)*
1
6
Produce surround back left/right channel sounds.
Surround back (R)*
1
7
Surround back*
1
8 Produces sounds mixed from surround back left/right channel sounds.
Subwoofer 9
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”.
●●●●●●●
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 12 Wednesday, March 25, 2015 9:59 AM
En 13
7.1-channel system (
RX-V579
only)
6.1-channel system (
RX-V579
only)
5.1-channel system
You can enjoy surround sound even without the center speaker (front 4.1-channel system).
You can place the subwoofer either in the left or right side.
5.1-channel system (
Virtual CINEMA FRONT
)
To utilize this configuration, set “Virtual CINEMA FRONT” (p.82) in the “Setup” menu to “On”.
You can enjoy surround sound even without the center speaker (front 4.1-channel system).
You can place the subwoofer either in the left or right side.
45
1
2
399
67
30 cm (1 ft) or more
10° to 30°10° to 30°
45
1
2
39
8
10° to 30°10° to 30°
45
12
39
10° to 30°10° to 30°
12
39
45
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 13 Wednesday, March 25, 2015 9:59 AM
En 14
4.1-channel system
3.1-channel system
2.1-channel system
45
12
9
10° to 30°10° to 30°
12
39
12
9
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 14 Wednesday, March 25, 2015 9:59 AM
En 15
Setting the speaker impedance
(U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to “6 Ω MIN”.
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press z (power).
3
Check that “SP IMP.” is displayed on the front display.
4
Press STRAIGHT to select “6 Ω MIN”.
5
Press z (power) to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
z (power)
STRAIGHT
1 2
PARTY
VIRTUAL
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
ZONE
2A
ZONE
3B
SP IMP.••8¬MIN
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 15 Wednesday, March 25, 2015 9:59 AM
En 16
Connect the speakers placed in your room to the unit.
The following diagrams provide connections for 5.1-
and 7.1-channel systems as examples. For other
systems, connect speakers while referring to the
connection diagram for the 5.1-channel system.
Cables required for connection
(commercially available)
Speaker cables (x the number of speakers)
Audio pin cable (x1: for connecting a subwoofer)
5.1-channel system 7.1-channel system
(RX-V579 only)
2 Connecting speakers
Caution
Remove the unit’s power cable from an AC wall outlet and turn
off the subwoofer before connecting the speakers.
Ensure that the core wires of the speaker cable do not touch
one another or come into contact with the unit’s metal parts.
Doing so may damage the unit or the speakers. If the speaker
cables short circuit, “Check SP Wires” will appear on the front
display when the unit is turned on.
+
+
FRONT CENTER SURROUND
SINGLE
SURROUND BACK/BI AMP
/ZONE B
OR OUT
P
B
Y
SPEAKERS
SUBWOOFER
PRE OUT
2
1
DC OUT
5V 0.5A
12
3
45
9
The unit (rear)
(RX-V579 only)
You can connect 2 subwoofers (with built-in amplifier) to the unit.
The 2 subwoofers output the same sound.
FRONT CENTER SURROUND
SINGLE
SURROUND BACK/BI AMP
/ZONE B
OR OUT
P
B
Y
SPEAKERS
SUBWOOFER
PRE OUT
2
1
DC OUT
5V 0.5A
1
67
2
3
45
9
9
The unit (rear)
When using only one surround back speaker, connect it to the
SINGLE jack (L side).
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 16 Wednesday, March 25, 2015 9:59 AM
En 17
Connecting speaker cables
Speaker cables have two wires. One is for connecting
the negative (-) terminal of the unit and the speaker, and
the other is for the positive (+) terminal. If the wires are
colored to prevent confusion, connect the black wire to
the negative and the other wire to the positive terminal.
a Remove approximately 10 mm (3/8”) of insulation from
the ends of the speaker cable and twist the bare wires of
the cable firmly together.
b Loosen the speaker terminal.
c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
d Tighten the terminal.
Using a banana plug
(U.S.A., Canada, China, Australia, Taiwan and General
models only)
a Tighten the speaker terminal.
b Insert a banana plug into the end of the terminal.
Connecting the subwoofer
(with built-in amplifier)
Use an audio pin cable to connect the subwoofer.
Connecting front speakers that
support bi-amp connections
(RX-V579 only)
When using front speakers that support bi-amp
connections, connect them to the FRONT jacks and
SURROUND BACK/BI-AMP/ZONE B jacks.
To enable the bi-amp function, set “Power Amp Assign”
(p.80) in the “Setup” menu to “BI-AMP” after connecting
the power cable to an AC wall outlet.
Surround back speakers or Zone B speakers cannot be used during
bi-amp connections.
The FRONT jacks and SURROUND BACK/BI-AMP/ZONE B jacks
output the same signals.
Connecting
Zone B
speakers
(RX-V579 only)
The Zone A/B function allows you to playback an input
source in the room where the unit is installed (Zone A)
and in another room (Zone B). To connect the Zone B
speakers, see “Playing back music in multiple rooms
(RX-V579 only)” (p.68).
Surround back speakers or bi-amplified front speakers cannot be
used while the Zone B function is enabled.
FRONT
aa
b
d
c
+ (red)
- (black)
FRONT
a
b
Banana plug
AV 6
2
1
Audio pin cable
12
3
45
9
FRONT CENTER SURROUND
SINGLE
SURROUND BACK/BI AMP
/ZONE B
SPEAKERS
The unit (rear)
Caution
Before making bi-amp connections, remove any brackets or
cables that connect a woofer with a tweeter. Refer to the
instruction manual of the speakers for details. If you are not
making bi-amp connections, make sure that the brackets or
cables are connected before connecting the speaker cables.
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 17 Wednesday, March 25, 2015 9:59 AM
En 18
Video/audio jacks
HDMI jacks
Transmit digital video and digital sound through a single
jack. Use an HDMI cable.
Use a 19-pin HDMI cable with the HDMI logo. We recommend using
a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.
The unit’s HDMI jacks support the HDMI Control, Audio Return
Channel (ARC), and 3D and 4K Ultra HD video transmission
(through output) features.
Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos.
Video jacks
COMPONENT VIDEO jacks (RX-V579 only)
Transmit video signals separated into three
components: luminance (Y), chrominance blue (P
B),
and chrominance red (P
R). Use a component video
cable with three plugs.
VIDEO jacks
Transmit analog video signals. Use a video pin cable.
Audio jacks
OPTICAL jacks
Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.
COAXIAL jacks
Transmit digital audio signals. Use a digital coaxial
cable.
AUDIO jacks
(Stereo L/R jacks)
Transmit analog stereo audio signals. Use a stereo pin
cable (RCA cable).
(Stereo mini jack)
Transmits analog stereo audio signals. Use a stereo
mini-plug cable.
Input/output jacks and cables
HDMI cable
Component video cable
Video pin cable
OPTICAL
Digital optical cable
Digital coaxial cable
Stereo pin cable
Stereo mini-plug cable
00_RX-V479_V579_om_U.book Page 18 Wednesday, March 25, 2015 9:59 AM
En 19
Connect a TV to the unit so that video input to the unit can be output to the TV. You can
also enjoy playback of TV audio on the unit.
To maximize the performance of the unit, we recommend connecting a TV with an HDMI
cable.
HDMI connection
Connect the TV to the unit with an HDMI cable and a digital optical cable.
You do not make a digital optical cable connection between the TV and the unit in the following cases:
– If your TV supports Audio Return Channel (ARC)
– If you will receive TV broadcasts only from the set-top box
If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
details on the settings, see “Information on HDMI” (p.114).
Component (RX-V579) / composite video connection
When connecting any video device with a component video cable, connect the TV to
the MONITOR OUT (COMPONENT VIDEO) jacks.
When connecting any video device with a video pin cable, connect the TV to the
MONITOR OUT (VIDEO) jack.
If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
Operations with TV screen are available only when your TV is connected to the unit via HDMI.
If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable
connection between the TV and the unit.
COMPONENT VIDEO connection (RX-V579 only)
Connect the TV to the unit with a component video cable and a digital optical cable.
3 Connecting a TV
About Audio Return Channel (ARC)
ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
When using ARC, connect a TV with an HDMI cable that supports ARC.
AV 1
AV 2
AV 3
AV 5
OPTICAL
COAXIAL COAXIAL
(
TV
)
COMPONENT
VIDEO
P
B
Y
VIDEO
AV 4
P
R
A
M
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI
3
HDMI
OUT
ARC
HDCP2.2
HDMI
HDMI
HDMI
AV 1
(
TV
)
OPTICAL
OPTICAL
OO
HDMI
HDCP2.2
OUT
ARC
The unit (rear)
HDMI OUT jack
(RX-V579)
AV 1 (OPTICAL) jack
(RX-V479)
AUDIO 1 (OPTICAL) jack
Audio output
(digital optical)
TV
HDMI input
AV 1
(
TV
)
OPTICAL
OPTICAL
PR
PB
Y
COMPONENT
VIDEO
O
O
P
R
P
B
Y
P
R
P
B
Y
COMPONENT
VIDEO
MONITOR OUT
PR
PB
Y
The unit (rear)
MONITOR OUT
(COMPONENT VIDEO) jacks
Video input
(component video)
Audio output
(digital optical)
TV
AV 1 (OPTICAL) jack
1 2 3 4 5 6 7 8 9 10
05_setup.fm Page 19 Wednesday, March 25, 2015 7:01 PM
En 20
VIDEO (composite video) connection
Connect the TV to the unit with a video pin cable and a digital optical cable.
VIDEO
V
V
AV 1
(
TV
)
OPTICAL
OPTICAL
O
O
MONITOR OUT
The unit (rear)
MONITOR OUT
(VIDEO) jack
Video input
(composite video)
Audio output
(digital optical)
TV
(RX-V579)
AV 1 (OPTICAL) jack
(RX-V479)
AUDIO 1 (OPTICAL) jack
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 20 Wednesday, March 25, 2015 9:59 AM
En 21
The unit is equipped with a variety of input jacks including HDMI input jacks to allow
you to connect different types of playback devices. For information on how to connect a
BLUETOOTH device, an iPod, or a USB storage device, see the following pages.
Connecting a BLUETOOTH device (p.53)
Connecting an iPod (p.54)
Connecting a USB storage device (p.59)
Connecting video devices (such as
BD
/
DVD
players)
Connect video devices such as BD/DVD players, set-top boxes (STBs) and game
consoles to the unit. Depending on the video/audio output jacks available on your video
device, choose one of the following connections. We recommend using an HDMI
connection if the video device has an HDMI output jack.
If the combination of video/audio input jacks available on the unit does not match your video device, change
its combination according to the output jacks of your device (p.22).
HDMI connection
Connect a video device to the unit with an HDMI cable.
If you connect a video device to the unit via HDMI, you need to connect your TV to the HDMI OUT jack of
the unit (p.19).
For the HDCP 2.2-compatible HDMI device, use the HDMI 6 jack to connect it.
Component video connection (RX-V579)
Connect a video device to the unit with a component video cable and an audio cable
(digital optical or digital coaxial). Choose a set of input jacks (on the unit) depending on
the audio output jacks available on your video device.
If you connect a video device to the unit via component video connection, you need to connect your TV to
the MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.19).
4 Connecting playback devices
HDMI
HDMI
HDMI
HDMI 1
(
BD/DVD
)
HDMI 2 HDMI 3 HDMI 4
HDMI 5 HDMI 6
HDCP2.2
The unit (rear)
HDMI output
Video device
HDMI 1–6 jacks
Output jacks on video device
Input jacks on the unit
Video Audio
Component video
Digital optical AV 1 (COMPONENT VIDEO + OPTICAL)
Digital coaxial AV 2 (COMPONENT VIDEO + COAXIAL)
Analog Stereo
You need to change the combination of
video/audio input jacks (p.22).
COAXIAL
OPTICAL
PR
PB
Y
COMPONENT
VIDEO
OPTICAL
( TV )
COAXIAL
COMPONENT
VIDEO
P
R
P
B
Y
AV 1
AV 2
O
O
C
C
P
R
P
B
Y
P
R
P
B
Y
The unit (rear)
AV 1-2 (COMPONENT VIDEO) jacks
Video output
(component video)
Video device
Audio output
(digital optical or digital coaxial)
AV 1 (OPTICAL) jack or
AV 2 (COAXIAL) jack
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 21 Wednesday, March 25, 2015 9:59 AM
En 22
Composite video connection
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial or stereo pin cable). Choose a set of input jacks (on the unit) depending on the
audio output jacks available on your video device.
If you connect a video device to the unit via composite video connection, you need to connect your TV to
the MONITOR OUT (VIDEO) jack of the unit (p.20).
Changing the combination of video/audio input jacks
If the combination of video/audio input jacks available on the unit does not match your
video device, change its combination according to the output jacks of your device. You
can connect a video device that has the following video/audio output jacks.
Output jacks on video device
Input jacks on the unit
Video Audio
Composite video
Digital coaxial
(RX-V579)
AV 3 (VIDEO + COAXIAL)
(RX-V479)
AV 1 (VIDEO + COAXIAL)
Analog stereo
(RX-V579)
AV 4–6 (VIDEO + AUDIO)
(RX-V479)
AV 2–4 (VIDEO + AUDIO)
Digital optical
You need to change the combination of
video/audio input jacks (p.22).
R
L
COAXIAL
R
L
COAXIAL
VIDEO
VIDEO
CC
L
R
L
R
V
V
The unit (rear)
(RX-V579)
AV 3–6 (VIDEO) jacks
(RX-V479)
AV 1–4 (VIDEO) jacks
Video output
(composite video)
Video device
Audio output
(digital coaxial or analog stereo)
(RX-V579)
AV 3 (COAXIAL) jack or
AV 4–6 (AUDIO) jacks
(RX-V479)
AV 1 (COAXIAL) jack or
AV 2–4 (AUDIO) jacks
Output jacks on video device Input jacks on the unit
Video Audio Video Audio
HDMI
Digital optical HDMI 1–6
(RX-V579)
AV 1 (OPTICAL)
(RX-V479)
AUDIO 1 (OPTICAL)
Digital coaxial HDMI 1–6
(RX-V579)
AV 2–3 (COAXIAL)
(RX-V479)
AUDIO 2 (COAXIAL)
AV 1 (COAXIAL)
Analog stereo HDMI 1–6
(RX-V579)
AV 4–6 (AUDIO)
(RX-V479)
AV 2–4 (AUDIO)
Component video
(RX-V579 only)
Analog stereo
AV 1–2
(COMPONENT
VIDEO)
AV 4–6 (AUDIO)
Composite video Digital optical
(RX-V579)
AV 3–6 (VIDEO)
(RX-V479)
AV 1–4 (VIDEO)
(RX-V579)
AV 1 (OPTICAL)
(RX-V479)
AUDIO 1 (OPTICAL)
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 22 Wednesday, March 25, 2015 9:59 AM
En 23
Necessary setting
For example, if you have connected a video device to HDMI 2 and AV 6 (AUDIO) jack
(“AV 4” on RX-V479) of the unit, change the combination setting as follows.
1
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit.
2
Press INPUT to select “HDMI 2” (video input jack to be used) as the
input source.
3
Press OPTION.
4
Use the cursor keys (q/w) to select “Audio In” and press ENTER.
5
Use the cursor keys (
e
/
r
) to select “
AV 6
” (“
AV 4
” on
RX-V479
) (audio
input jack to be used).
6
Press OPTION.
This completes the necessary settings.
If you select “HDMI 2” as the input source by pressing INPUT, the video/audio played
back on the video device will be output from the unit.
Connecting audio devices (such as
CD
players)
Connect audio devices such as CD players and MD players to the unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
AV 6
R
L
AUDIO
L
R
L
R
HDMI
HDMI
HDMI
HDMI 2 jack
(RX-V579)
AV 6 (AUDIO) jack
(RX-V479)
AV 4 (AUDIO) jack
Video device
Audio output
(analog stereo)
The unit (rear)
HDMI output
MUTE
TOP MENU HOME
POP UP/MENU
DISPLAYRETURN
SETUP
OPTION
ENTER
BLUETOOTH
MUTE
TO
P MENU
POP UP/MEN
U
DISPLA
Y
A
A
R
ET
UR
N
SETU
P
P
BLUE
T
O
OT
H
OPTION
Cursor keys
ENTER
Cursor keys
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Audio In
VOL.
Audio output jacks on audio device Audio input jacks on the unit
Digital optical
(RX-V579)
AV 1 (OPTICAL)
(RX-V479)
AUDIO 1 (OPTICAL)
Digital coaxial
(RX-V579)
AV 2–3 (COAXIAL)
(RX-V479)
AUDIO 2 (COAXIAL)
AV 1 (COAXIAL)
Analog stereo
(RX-V579)
AV 4–6 (AUDIO)
(RX-V479)
AV 2–4 (AUDIO)
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Audio••••••AV6
VOL.
1 2 3 4 5 6 7 8 9 10
05_setup.fm Page 23 Monday, March 30, 2015 9:54 AM
En 24
Connecting to the jack on the front panel
Use the AUX jack on the front panel to temporarily connect devices such as portable
audio players to the unit.
Before making a connection, stop playback on the device and turn down the volume on the unit.
If you select “AUX” as the input source by pressing INPUT, the audio played back on
the device will be output from the unit.
You need to prepare the audio cable that matches the output jacks on your device.
For details on how to connect an USB storage device, see “Connecting a USB storage device” (p.59).
Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
Assembling and connecting the AM antenna
Unwind only the length of cable needed from the AM antenna unit.
The wires of the AM antenna have no polarity.
R
L
COAXIAL
OPTICAL
R
L
COAXIAL
OPTICAL
CC
L
R
L
R
OO
Audio output
(either digital optical,
digital coaxial, or analog stereo)
(RX-V579)
AV 1-6 jacks
(RX-V479)
AUDIO 1-2 jacks
AV 1-4 jacks
The unit (rear)
Audio device
PROGRAM
TONE CONTROL
STRAIGHT
(CONNECT)
AUX
AUDI O
5V 1A
SCENE
INPUT
TV
BD
DVD
NET
RADIO
Portable audio player
The unit (front)
5 Connecting the FM/AM antennas
FM antenna
AM antenna
The unit (rear)
Hold down Insert Release
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 24 Wednesday, March 25, 2015 9:59 AM
En 25
Connect the unit to a router (access point) with a network cable, or prepare the wireless
antenna for establishing a wireless network connection.
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
Connecting a network cable
Connect the unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
If you are using a router that supports DHCP, you do not need to configure any network settings for the
unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only need
to configure the network settings if your router does not support DHCP or if you want to configure the
network parameters manually (p.92).
You can check whether the network parameters (such as IP address) are properly assigned to the unit in
“Information” (p.92) in the “Setup” menu.
Some security software installed on your PC or the firewall settings of network devices (such as a router)
may block the access of the unit to the network devices or the Internet. In these cases, configure the
security software or firewall settings appropriately.
Each server must be connected to the same subnet as the unit.
To use the service via the Internet, broadband connection is strongly recommended.
Preparing a wireless antenna
If you connect the unit wirelessly, erect the wireless antenna.
For information on how to connect the unit to a wireless network, see “Connecting to a
network wirelessly” (p.32).
Erect the wireless antenna.
Do not apply excessive force on the wireless antenna. Doing so may damage the antenna.
6 Preparing for connecting to a network
ANTENNA
HDMI 1
(
BD/DVD
)
HDMI
6
HDMI
OUT
ARC
LAN
WAN
Network Attached Storage
(NAS)
Internet
Modem
Wireless
router
Network cable
PC
The unit (rear)
WIRELESS
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 25 Wednesday, March 25, 2015 9:59 AM
En 26
After all the connections are complete, plug in the power cable.
7 Connecting the power cable
Before connecting the power cable (Taiwan and General models only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V, 50/60 Hz.
Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC
wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a
potential fire hazard.
The unit (rear)
VOLTAGE SELECTOR
To an AC wall outlet
The unit (rear)
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 26 Wednesday, March 25, 2015 9:59 AM
En 27
Select the desired on-screen menu language.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
Operations with TV screen are available only when your TV is connected to
the unit via HDMI. If not, carry out operations while viewing the front display.
If you turn on the unit for the first time, the message regarding the network
setup appears. To continue the language setup, press RETURN.
3
Press SETUP.
4
Use the cursor keys to select “Language” and press
ENTER.
5
Use the cursor keys to select the desired language.
6
To exit from the menu, press SETUP.
The information on the front display is provided in English only.
8 Selecting an on-screen menu language
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Bluetooth
Language
English
日本語
Français
Deutsch
Español
Русский
Italiano
中文
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Bluetooth
Language
English
日本語
Français
Deutsch
Español
Русский
Italiano
中文
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
O
OPTION
FM
/
A
M
V
O
L
U
ME
P
R
OGR
A
M
USB
S
TRA
IG
H
T
ENHAN
C
E
R
B
A
SS
IN
PU
T
B
D
D
V
D
TV
SC
E
N
E
R
ADI
O
SLEEP
BLU
E
YEL
L
OW
LL
G
R
E
E
N
R
E
D
DIREC
T
Z
O
N
E
AZ
O
NE
B
NET
N
E
T
BL
UE
T
O
OT
H
SETUP
RETURN
Cursor keys
ENTER
z z
Cursor keys
00_RX-V479_V579_om_U.book Page 27 Wednesday, March 25, 2015 9:59 AM
En 28
The Yamaha Parametric room Acoustic Optimizer (YPAO) function
detects speaker connections, measures the distances from them to
your listening position(s), and then automatically optimizes the
speaker settings, such as volume balance and acoustic
parameters, to suit your room.
When you use the front 5.1-channel speaker (Virtual CINEMA FRONT)
configuration (p.13), set “Virtual CINEMA FRONT” (p.82) in the “Setup” menu to
“On” beforehand.
Please note the following when using YPAO.
– Use YPAO after connecting a TV and speakers to the unit.
During the measuring process, test tones are output at high volume. Ensure that
the test tones do not frighten small children.
– During the measuring process, you cannot adjust the volume.
– During the measuring process, keep the room as quiet as possible.
– Do not connect headphones.
– Do not stand between the speakers and the YPAO microphone during the
measurement process (about 3 minutes).
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
Operations with TV screen are available only when your TV is connected to
the unit via HDMI. If not, carry out operations while viewing the front display.
3
Turn on the subwoofer and set the volume to half. If the
crossover frequency is adjustable, set it to maximum.
(RX-V579 only)
If you are using bi-amp connection or
Zone B
speakers, set “Power AMP Assign”
(p.80) in the “
Setup
” menu to the appropriate setting before starting
YPAO
.
4
Place the YPAO microphone at your listening
position and connect it to the YPAO MIC jack on the
front panel.
Place the YPAO microphone at your listening position (same height as your
ears). We recommend the use of a tripod as a microphone stand. You can
use the tripod screws to stabilize the microphone.
The following screen appears on the TV.
9 Optimizing the speaker settings automatically (YPAO)
VOLUME HIGH CUT
CROSSOVER/
MIN MAXMIN MAX
9
12
3
9
45
Ear height
The unit (front)
Auto Setup
Start
Exit
Press SETUP key to
Start
Power AMP Assign
setting (p.80)
(RX-V579 only)
Power Amp Assign
Basic
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RETUR
N
SETU
P
P
O
OPTION
FM
/
A
M
V
O
L
U
ME
P
R
OGR
AM
USB
ST
RA
IG
H
T
ENHAN
C
E
R
B
A
SS
IN
PU
T
B
D
D
V
D
TV
SC
E
N
E
R
ADI
O
SLEEP
ENTE
R
BLU
E
YEL
L
OW
LL
G
R
E
E
N
R
E
D
DIREC
T
Z
O
N
E
AZ
O
NE
B
NET
N
E
T
BL
UE
T
O
OT
H
z z
00_RX-V479_V579_om_U.book Page 28 Wednesday, March 25, 2015 9:59 AM
En 29
5
To start the measurement, use the cursor keys to
select “Start” and press SETUP.
The measurement will start in 10 seconds. Press ENTER to
start the measurement immediately.
To stop the measurement temporarily, press RETURN and follow the
procedure in “Error messages” (p.30).
The following screen appears on the TV when the
measurement finishes.
1 The number of speakers (front side/rear
side/subwoofer)
2 Speaker distance (nearest/farthest)
3 Adjustment range of speaker output level
4 Warning message (if available)
If any error message (such as E-1) or warning message (such as W-1)
appears, see “Error messages” (p.30) or “Warning messages” (p.31).
A speaker with a problem is indicated by blinking of the speaker indicators in
the front display.
If multiple warnings are given (when operating with the front display), use
the cursor keys (q/w) to check the other warning messages.
6
Use the cursor keys (e/r) to select “SAVE” and
press ENTER.
The adjusted speaker settings are applied.
To finish the measurement without saving the result, select “CANCEL”.
7
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
1
2
3
4
Auto Setup
Start
Exit
Measurement
Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
OK:ENTER
Caution
The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
Auto Setup
Start
Exit
Measurement
Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
SAVE
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
UNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
O
OPTION
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHAN
C
E
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
N
E
AZ
O
NE
B
NET
NE
T
BLU
E
T
O
OT
H
SETUP
RETURN
Cursor keys
ENTER
Cursor keys
00_RX-V479_V579_om_U.book Page 29 Wednesday, March 25, 2015 9:59 AM
En 30
Error messages
If any error message is displayed during the measurement, resolve the problem and perform YPAO again.
TV screen
Front display
Procedure to handle errors
1
Check the content of error message and
press ENTER.
2
Use the cursor keys (e/r) to select the
desired operation.
To exit the YPAO measurement:
a Select “EXIT” and press ENTER.
b Use the cursor keys (q/w) to select “Exit” and press
ENTER.
c Disconnect the YPAO microphone from the unit.
To retry the
YPAO
measurement from
beginning:
Select “RETRY” and press ENTER.
To proceed with the current YPAO
measurement (for E-5 and E-9 only):
Select “PROCEED” and press ENTER.
Error
message
Auto Setup
Start
Exit
ERROR
E-5:Noisy
PROCEED
5%
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
E-5:NOISY
VOL.
Texts in parentheses denote indicators on the front display.
Error message Cause Remedy
E-1:No Front SP
(E-1:NO FRNT SP)
Front speakers are not detected.
Exit YPAO, turn off the unit, and then check the speaker
connections.
E-2:No Sur. SP
(E-2:NO SUR SP)
One of the surround speakers cannot be
detected.
E-4:SBR SBL
(E-4:SBR SBL)
A surround back speaker is connected to
the R side only.
When using only one surround back speaker, you need to
connect it to the SINGLE jack (L side). Exit YPAO, turn off the
unit, and then reconnect the speaker.
E-5:Noisy
(E-5:NOISY)
The noise is too loud.
Keep the room quiet and retry YPAO. If you select
“PROCEED”, YPAO takes the measurement again and
ignores any noise detected.
E-6:Check Sur.
(E-6:CHECK SUR)
Surround back speakers are connected,
but no surround speakers are connected.
Surround speakers need to be connected in order to use
surround back speakers. Exit YPAO, turn off the unit, and
then reconnect the speakers.
E-7:No MIC
(E-7:NO MIC)
The YPAO microphone has been removed.
Connect the YPAO microphone to the YPAO MIC jack firmly
and retry YPAO.
E-8:No Signal
(E-8:NO SIGNAL)
The YPAO microphone cannot detect test
tones.
Connect the YPAO microphone to the YPAO MIC jack firmly
and retry YPAO. If this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or service center.
E-9:User Cancel
(E-9:CANCEL)
The measurement has been canceled. Retry or exit YPAO as necessary.
E-10:Internal Err.
(E-10:INTERNAL)
An internal error has occurred.
Exit YPAO, and turn off and on the unit. If this error occurs
repeatedly, contact the nearest authorized Yamaha dealer or
service center.
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 30 Wednesday, March 25, 2015 9:59 AM
En 31
Warning messages
If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.
TV screen
Front display
Procedure to handle warnings
1
Check the content of warning message
and press ENTER.
2
Use the cursor keys (e/r) to select the
desired operation.
To save the measurement results:
Select “SAVE” and press ENTER.
To discard the measurement result:
Select “CANCEL” and press ENTER.
3
Disconnect the YPAO microphone from
the unit.
Warning
message
Auto Setup
Start
Exit
Measurement
Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
W-1:Out of Phase
OK:ENTER
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
W-1:PHASE
VOL.
Problem speaker (blinks)
Texts in parentheses denote indicators on the front display.
Warning message Cause Remedy
W-1:Out of Phase
(W-1:PHASE)
A speaker cable may be connected with the
reverse polarity (+/-).
Check the cable connections (+/-) of the problem speaker.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker cable.
If the speaker is connected correctly:
Depending on the type of speakers or room environment, this
message may appear even if the speakers are connected
correctly. In this case, you can ignore the message.
W-2:Over Distance
(W-2:DISTANCE)
A speaker is placed more than 24 m (80 ft)
from the listening position.
Exit YPAO, turn off the unit, and place the problem speaker
within 24 m (80 ft) of the listening position.
W-3:Level Error
(W-3:LEVEL)
There are significant volume differences
between the speakers.
Check the usage environment and cable connections (+/-) of
each speaker, and the volume of the subwoofer. If there is
any problem, exit YPAO, turn off the unit, and then reconnect
speaker cable or correct the speaker positions. We
recommend using the same speakers or speakers with
specifications that are as similar as possible.
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 31 Wednesday, March 25, 2015 9:59 AM
En 32
Connect the unit to a wireless router (access point) or a mobile device by establishing a
wireless connection.
When you connect the unit to a router with a network cable, you need not do this procedure.
Selecting the connection method
Select a connection method according to your network environment.
Connecting with a wireless router (access point)
Connect the unit to a wireless router (access point).
You can enjoy Internet radio, AirPlay, or music files stored on media servers (PC/NAS)
on the unit.
You can also use the application for smartphone / tablet “AV CONTROLLER” (p.6) to
control the unit from mobiles devices or enjoy music files stored on mobiles devices on
the unit.
For details on connection, see “Connecting the unit to a wireless network” (p.33).
You cannot use the wireless LAN connection simultaneously with the wired LAN connection (p.25) or
Wireless Direct (p.40).
If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
Connecting without a wireless router (access point)
Connect a mobile device to the unit directly.
You can use the application for smartphone / tablet “AV CONTROLLER” (p.6) to control
the unit from mobiles devices or enjoy music files stored on mobiles devices on the unit.
For details on connection, see “Connecting a mobile device to the unit directly
(Wireless Direct)” (p.40).
You cannot use Wireless Direct simultaneously with the wired LAN connection (p.25) or the wireless LAN
connection (p.33).
When Wireless Direct is enabled, the unit cannot connect to the Internet. Therefore, you cannot use any
kind of Internet service such as Internet radio.
Also the mobile device cannot connect to the Internet, so we recommend you disconnect the mobile device
from the unit.
10 Connecting to a network wirelessly
The unit
Wireless router
Mobile device
(such as iPhone)
Internet
Modem
The unit
Mobile device
(such as iPhone)
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 32 Wednesday, March 25, 2015 9:59 AM
En 33
Connecting the unit to a wireless network
There are several methods to connect the unit to a wireless
network.
Select a connection method according to your environment.
A: Sharing the iOS device setting
You can easily setup a wireless connection by applying the
connection settings on iOS devices (iPhone/iPod touch).
Before proceeding, confirm that your iOS device is connected to a
wireless router.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
Press SETUP.
4
Use the cursor keys (q/w) to select “Network” and
press ENTER.
5
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
6
Use the cursor keys (e/r) to select “Wireless
(Wi-Fi)” and press ENTER.
The unit may connect automatically to the access point to which it has
connected previously. In this case, the message indicating the successful
connection will appear. You can ignore this message and proceed to the
next step.
7
Use the cursor keys (q/w) to select “Share Wi-Fi
Settings(iOS)” and press ENTER.
Yes
Do you own iOS devices
(iPhone/iPod touch)?
Yes
A (p.33)
B (p.35)
Does your wireless router
(access point) has a WPS
button?
C (p.36)
No
No
Network Connection
Connection Wireless (Wi-Fi)
OK:ENTER
Back:RETURN
OK:ENTER
Back:RETURN
Wireless (Wi-Fi)
Select a setup method.
WPS Button
Share Wi-Fi Settings(iOS)
Access Point Scan
Manual Setting
PIN Code
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
SETUP
Cursor keys
ENTER
z
Cursor keys
00_RX-V479_V579_om_U.book Page 33 Wednesday, March 25, 2015 9:59 AM
En 34
8
Use the cursor keys (q/w) and ENTER to select the
desired connection method.
The following connection methods are available.
When you use wired network connection, Wireless (WAC) is not available.
9
Read the on-screen description and press ENTER.
Sharing the iOS device setting wirelessly
If you select “Wireless (WAC)” as the connection method, perform
the network setting sharing operation on your iOS device. (The
following procedure is a setup example for iOS 8.)
1
On the iOS device, select the unit as the AirPlay
speaker in the Wi-Fi screen.
iOS (example of English version)
2
Select the network (access point) of which you want
to share the settings with the unit.
iOS (example of English version)
When the sharing process finishes, the unit is automatically
connected to the selected network (access point).
Wireless (WAC)
You can apply the connection settings on the iOS
device to the unit using a wireless connection. For
details, see “Sharing the iOS device setting
wirelessly”.
(You need iOS device with iOS 7 or later.)
USB Cable
You can apply the connection settings on the iOS
device to the unit using a USB cable. For details,
see “Sharing the iOS device setting using a USB
cable”.
(You need iOS device with iOS 5 or later.)
OK:ENTER
Back:RETURN
Share Wi-Fi Settings
Select method for sharing
setting with iOS device.
Wireless (WAC)
USB Cable
The name of the unit
Tap here to start setup
The network currently selected
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
Cursor keys
ENTER
Cursor keys
00_RX-V479_V579_om_U.book Page 34 Wednesday, March 25, 2015 9:59 AM
En 35
Sharing the iOS device setting using a USB cable
If you select “USB Cable” as the connection method, follow the
procedure below to share the iOS device setting with the unit.
1
Connect the iOS device to the USB jack, and disable
the screen lock on the iOS device.
2
Press ENTER on the remote control.
3
Tap “Allow” in the message appeared on the iOS
device.
When the connection process finishes, “Completed”
appears on the TV screen.
4
To exit from the menu, press SETUP.
B: Using the WPS button configuration
You can easily set up a wireless connection with one push of the
WPS button.
1
Press z (receiver power) to turn on the unit.
2
Hold down INFO (WPS) on the front panel for 3
seconds.
“Press WPS button on Access Point” appears on the front
display.
3
Push the WPS button on the wireless router (access
point).
When the connection process finishes, “Completed”
appears on the front display.
If “Not connected” appears, repeat from step 1 or try
another connection method.
Depending on the model of the wireless router (access point), the unit may not
connect to it. In this case, try connection with “Access Point Scan” or “Manual
Setting” (p.36).
You can use “WPS Button” (p.36) in the “Setup” menu to set up a wireless
connection with the WPS button.
AUDIO
AUX
5V 1A
The unit (front)
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by the
Wi-Fi Alliance, which allows easy establishment of a wireless
home network.
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
BLUE
YELLOWGREEN
RED
TOP MENU HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
ENTER
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ZONE A ZONE B
DIRECT ENHANCER BASS
NET
BLUETOOTH
INPUT
BD
DVD
TV
NET
SCENE
RADIO
SLEEP
TUNIN
G
PRE
S
E
T
MUTE
TUNIN
G
MEM
OR
Y
BLUE
YEL
LO
W
OO
G
REE
N
RE
D
T
O
P
MENU
M
P
O
P-UP
/
ME
N
U
DISPLA
Y
A
A
RETUR
N
O
OPTION
FM/AM
V
O
LUM
E
P
R
OG
R
A
M
US
B
ST
RA
I
G
H
T
Z
O
N
E
AZ
O
NE
B
D
IRE
C
TE
NHAN
C
E
R
BA
SS
NET
BLUE
T
O
O
T
H
I
N
PU
T
BD
DV
D
TV
NET
SC
ENE
RA
DI
O
S
LEE
P
SETUP
ENTER
z
05_setup.fm Page 35 Wednesday, March 25, 2015 7:00 PM
En 36
C: Using other connection methods
If your wireless router (access point) does not support WPS button
configuration method, follow the procedure below to configure the
wireless network settings.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
Press SETUP.
4
Use the cursor keys (q/w) to select “Network” and
press ENTER.
5
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
6
Use the cursor keys (e/r) to select “Wireless
(Wi-Fi)” and press ENTER.
The unit may connect automatically to the access point to which it has
connected previously. In this case, the message indicating the successful
connection will appear. You can ignore this message and proceed to the
next step.
7
Use the cursor keys (q/w) to select the desired
connection method and press ENTER.
The following connection methods are available.
Network Connection
Connection Wireless (Wi-Fi)
OK:ENTER
Back:RETURN
WPS Button
You can set up a wireless connection with the
WPS button while viewing the TV screen. Follow
the instructions displayed on the TV screen.
Share Wi-Fi
Settings(iOS)
See “Sharing the iOS device setting” (p.33).
Access Point
Scan
You can set up a wireless connection by
searching for an access point. For details on
settings, see “Searching for an access point”
(p.37).
Manual Setting
You can setup a wireless connection by entering
the required information (such as SSID)
manually. For details on settings, see “Setting up
the wireless connection manually” (p.38).
PIN Code
You can set up a wireless connection by entering
the unit’s PIN code into the wireless router
(access point). The method is available if the
wireless router (access point) supports the WPS
PIN code method. For details on settings, see
“Using the WPS PIN code” (p.39).
OK:ENTER
Back:RETURN
Wireless (Wi-Fi)
Select a setup method.
WPS Button
Share Wi-Fi Settings(iOS)
Access Point Scan
Manual Setting
PIN Code
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
SETUP
Cursor keys
ENTER
z
Cursor keys
00_RX-V479_V579_om_U.book Page 36 Wednesday, March 25, 2015 9:59 AM
En 37
Searching for an access point
If you select “Access Point Scan” as the connection method, the
unit starts searching for access points. After a while, the list of
available access points appears on the TV screen.
1
Use the cursor keys (q/w) to select the desired
access point and press ENTER.
The wireless connection setting screen appears on the TV.
2
Press ENTER.
3
Use the cursor keys and ENTER to enter the
security key.
Button functions
[]/[]: Moves the cursor left and right.
[Aa]: Switches the letter cases (upper/lower).
[BKSP]: Deletes the character to the left of the selected one.
[Space]: Enters a space.
[DEL]: Deletes the selected character.
When finished entering the key, select “OK” to return to the
previous screen.
4
Use the cursor keys (q/w) to select “Connect” and
press ENTER to start the connection process.
When the connection process finishes, “Completed”
appears on the TV screen.
If “Not connected” appears, repeat from step 1 or try
another connection method.
5
To exit from the menu, press SETUP.
Access Point Scan
Access Point X
WPA-PSK (AES)
SSID:
Security:
Security Key:
Connect
RETURN
ENTEREdit:
CANCEL:
abc_
( ) [ ] { } < > * ! ? # % &
. , : ; _ | / \ $ ~^´ ’ `
0 1 2 3 4 5 6 7 8 9 + - =
Aa BKSP Space DEL
a b c d e f g h i j k l m
n o p q r s t u v w x y z
Network Connection
OK
CANCEL
CLEAR
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
SETUP
Cursor keys
ENTER
Cursor keys
00_RX-V479_V579_om_U.book Page 37 Wednesday, March 25, 2015 9:59 AM
En 38
Setting up the wireless connection manually
If you select “Manual Setting” as the connection method, the
wireless connection setting screen appears on the TV.
You need to setup the SSID (network name), encryption method
and security key for your network.
1
Use the cursor keys (q/w) to select “SSID” and
press ENTER.
2
Use the cursor keys and ENTER to enter the SSID of
the access point.
When finished entering the key, select “OK” to return to the
previous screen.
3
Use the cursor keys (q/w) to select “Security” and
the cursor keys (e/r) to select the encryption
method.
Choices
None, WEP, WPA-PSK (AES), Mixed Mode
If you select “None”, the connection may be insecure since the
communication is not encrypted.
4
Use the cursor keys (q/w) to select “Security Key”
and press ENTER.
If you select “None” in step 3, this item is not available.
5
Use the cursor keys and ENTER to enter the
security key.
If you select “WEP” in step 3, enter either 5 or 13 character
string, or 10 or 26 hexadecimal digits.
If you select the method other than “WEP” in step 3, enter
either 8 to 63 character string, or 64 hexadecimal digits.
When finished entering the key, select “OK” to return to the
previous screen.
6
Use the cursor keys (q/w) to select “Connect” and
press ENTER to start the connection process.
When the connection process finishes, “Completed”
appears on the TV screen.
If “Not connected” appears, check that all the information is
entered correctly, and repeat from step 1.
7
To exit from the menu, press SETUP.
Manual Setting
Access Point X
None
SSID:
Security:
Security Key:
Connect
RETURN
ENTEREdit:
CANCEL:
****
( ) [ ] { } < > * ! ? # % &
. , : ; _ | / \ $ ~^´ ’ `
0 1 2 3 4 5 6 7 8 9 + - =
Aa BKSP Space DEL
a b c d e f g h i j k l m
n o p q r s t u v w x y z
Network Connection
OK
CANCEL
CLEAR
****
( ) [ ] { } < > * ! ? # % &
. , : ; _ | / \ $ ~^´ ’ `
0 1 2 3 4 5 6 7 8 9 + - =
Aa BKSP Space DEL
a b c d e f g h i j k l m
n o p q r s t u v w x y z
Network Connection
OK
CANCEL
CLEAR
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
SETUP
Cursor keys
ENTER
Cursor keys
00_RX-V479_V579_om_U.book Page 38 Wednesday, March 25, 2015 9:59 AM
En 39
Using the WPS PIN code
If you select “PIN Code” as the connection method, the list of
available access points appears on the TV screen.
1
Use the cursor keys (q/w) to select the desired
access point and press ENTER.
The PIN code of the unit appears on the TV screen.
2
Enter the unit’s PIN code into the wireless router
(access point).
For details on settings, refer to the instruction manual of the
wireless router (access point).
3
Press ENTER to start the connection process.
When the connection process finishes, “Completed”
appears on the TV screen.
If “Not connected” appears, repeat from step 1 or try
another connection method.
4
To exit from the menu, press SETUP.
: 00000000
OK:ENTER
Back:RETURN
PIN Code
PIN Code
Enter the PIN code
into the access point.
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
SETUP
Cursor keys
ENTER
Cursor keys
00_RX-V479_V579_om_U.book Page 39 Wednesday, March 25, 2015 9:59 AM
En 40
Connecting a mobile device to the unit
directly (
Wireless Direct
)
Follow the procedure below to connect a mobile device to the unit
directly.
Wireless Direct connection may be insecure since the communication is not
strongly encrypted. The unit may operate by playback operation on wireless
devices connected to the unit without permission.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
Press SETUP.
4
Use the cursor keys (q/w) to select “Network” and
press ENTER.
5
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
6
Use the cursor keys (e/r) to select “Wireless
Direct” and press ENTER.
7
Use the cursor keys (q/w) to select “Security” and
the cursor keys (e/r) to select the encryption
method.
Choices
None, WPA2-PSK (AES)
If you select “None”, the connection may be insecure since the
communication is not encrypted.
8
Use the cursor keys (q/w) to select “Security Key”
and press ENTER.
If you select “None” in step 7, this item is not available.
9
Use the cursor keys and ENTER to enter the
security key.
Enter either 8 to 63 character string, or 64 hexadecimal
digits.
When finished entering the key, select “OK” to return to the
previous screen.
Before proceeding to the next step, record the following information. These
information will be needed to configure the Wi-Fi setting of a mobile device.
– SSID displayed on the TV screen
– Security key you have just entered
Network Connection
Connection Wireless Direct
OK:ENTER
Back:RETURN
abc_
( ) [ ] { } < > * ! ? # % &
. , : ; _ | / \ $ ~^´ ’ `
0 1 2 3 4 5 6 7 8 9 + - =
Aa BKSP Space DEL
a b c d e f g h i j k l m
n o p q r s t u v w x y z
Network Connection
OK
CANCEL
CLEAR
1 2 3 4 5 6 7 8 9 10
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
SETUP
Cursor keys
ENTER
z
Cursor keys
00_RX-V479_V579_om_U.book Page 40 Wednesday, March 25, 2015 9:59 AM
En 41
10
Use the cursor keys (q/w) to select “Save” and
press ENTER to save the setting.
This completes the settings and “Completed” appears on
the TV screen.
Next, configure the Wi-Fi settings of a mobile device.
11
Configure the Wi-Fi settings of a mobile device.
For details on settings of your mobile device, refer to the
instruction manual of the mobile device.
a Enable the Wi-Fi function on the mobile device.
b Select the SSID displayed in step 9 from the list of available
access points.
c When you are prompted for a password, enter the security key
displayed in step 9.
12
To exit from the menu, press SETUP.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
SETUP
Cursor keys
ENTER
Cursor keys
1 2 3 4 5 6 7 8 9 10
00_RX-V479_V579_om_U.book Page 41 Wednesday, March 25, 2015 9:59 AM
En 42
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
UNIN
G
PRE
S
ET
TUNIN
G
MEM
O
RY
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
O
OPTION
PR
O
G
R
AM
ST
RA
I
G
H
T
ENHAN
C
E
R
BA
SS
BD
DV
D
TV
SC
E
N
E
R
A
DI
O
S
LEEP
E
NTE
R
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRECT
Z
O
N
E
AZ
O
NE
B
NET
Input selection
keys
VOLUME
MUTE
PLAYBACK
1
Turn on the external devices (such as a TV or
BD/DVD player) connected to the unit.
2
Use the input selection keys to select an input
source.
3
Start playback on the external device or select a
radio station.
Refer to the instruction manual for the external device.
For details on the following operations, see the
corresponding pages.
Listening to FM/AM radio (p.49)
Playing back iPod music (p.54)
Playing back music via BLUETOOTH (p.53)
Playing back music stored on a USB storage device
(p.59)
Playing back music stored on media servers (PCs/NAS)
(p.62)
Listening to Internet radio (p.65)
Playing back music with AirPlay (p.57)
4
Press VOLUME to adjust the volume.
To mute the audio output, press MUTE. Press MUTE again to unmute.
To adjust the treble/bass settings, use the “Option” menu or TONE
CONTROL on the front panel (p.73).
Basic playback procedure
Input selection
keys
00_RX-V479_V579_om_U.book Page 42 Wednesday, March 25, 2015 9:59 AM
En 43
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
TO
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
O
OPTION
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
S
LEEP
ENTE
R
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
N
E
AZ
O
NE
B
N
E
T
BLUE
T
O
OT
H
SCENE
The SCENE function allows you to select the assigned input source,
sound program, Compressed Music Enhancer on/off, and target
zones (RX-V579 only) with just one touch.
Selecting a registered scene
1
Press SCENE.
The input source and settings registered to the
corresponding scene are selected. The unit turns on
automatically when it is in standby mode.
By default, the following settings are registered for each scene.
Texts in brackets shows default settings for RX-V479.
The SCENE link playback function allows you to automatically turn on the TV or
start playback of an external device connected to the unit via HDMI, in conjunction
with a scene selection. To enable SCENE link playback, set “SCENE” (p.85) in the
“Setup” menu to “On”.
Configuring scene assignments
1
Perform the following operations to prepare the
settings you want to assign to a scene.
Select an input source (p.42)
Select a sound program (p.44)
Enable/disable Compressed Music Enhancer (p.48)
(RX-V579 only)
Enable/disable the audio output to Zone A/B (p.69)
2
Hold down the desired SCENE key until “SET
Complete” appears on the front display.
Selecting the input source and favorite settings with one touch (SCENE)
SCENE
Input HDMI 1
AV 1
[AUDIO 1]
NET RADIO TUNER
Sound program Sci-Fi STRAIGHT
7ch Stereo
[5ch Stereo]
7ch Stereo
[5ch Stereo]
Compressed
Music Enhancer
OffOnOnOn
SCENE link
playback
On On Off Off
Target zone
(
RX-V579
only)
Zone A Zone A Zone A Zone A
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
SET Complete
VOL.
00_RX-V479_V579_om_U.book Page 43 Wednesday, March 25, 2015 9:59 AM
En 44
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
F
M
/
A
M
V
O
L
U
ME
USB
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
ENTE
R
BLUE
YELL
OW
LL
G
REE
N
RE
D
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
OPTION
STRAIGHT
DIRECT
ENHANCER
BASS
PROGRAM
The unit is equipped with a variety of sound programs and
surround decoders that allow you to enjoy playback sources with
your favorite sound mode (such as sound field effect or stereo
playback).
I want to enjoy viewing video sources such as
movies, TV programs, or games.
Select a sound program suitable for each video source by
pressing PROGRAM repeatedly (p.45).
I want to enjoy listening to music sources or stereo
playback.
Select a sound program suitable for music or stereo playback by
pressing PROGRAM repeatedly (p.46).
I want to enjoy multichannel playback from
2-channel sources.
Select a surround decoder in the “Option” menu (p.72).
I want to enjoy unprocessed sounds in original
channels.
Switch to the straight decode mode by pressing STRAIGHT
(p.47).
I want to enjoy pure high fidelity sounds.
Enable the direct playback mode by pressing DIRECT (p.48).
This mode reduces the electrical noise from other circuitry to allow
you to enjoy Hi-Fi sound quality.
I want to enjoy enhanced bass sounds.
Enable Extra Bass by pressing BASS (p.48).
I want to enjoy listening to compressed music.
Enable Compressed Music Enhancer by pressing ENHANCER
(p.48).
This mode lets you enjoy compressed music stored on a
BLUETOOTH device or USB storage device with additional depth
and breadth (p.48).
The sound mode can be applied separately to each input source.
When you play back audio signals with a sampling rate of higher than 96 kHz, the
straight decode mode (p.47) is automatically selected.
You can check which speakers are currently outputting sound by looking at the
speaker indicators on the unit’s front panel (p.8).
Selecting the sound mode
00_RX-V479_V579_om_U.book Page 44 Wednesday, March 25, 2015 9:59 AM
En 45
Enjoying stereoscopic sound fields (
CINEMA DSP 3D
)
The unit is equipped with a variety of sound programs that utilize Yamaha's original
DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like
actual movie theaters or concert halls in your room and enjoy natural stereoscopic
sound fields.
You can adjust the sound field effect level in “DSP Level” (p.73) in the “Option” menu.
To use the conventional CINEMA DSP, set “CINEMA DSP 3D Mode” (p.86) in the “Setup” menu to “Off”.
Sound programs suitable for movies (MOVIE)
The following sound programs are optimized for viewing video sources, such as
movies, TV programs, and games.
Standard
This program creates a sound field that emphasizes the surround feeling
without disturbing the original acoustic positioning of multichannel audio,
such as Dolby Digital and DTS. Its design is based on the concept of the
ideal movie theater, in which the audience is surrounded by beautiful
reverberations from the left, right, and rear.
Spectacle
This program delivers the scale and grandeur of spectacular movie
productions. It delivers an expansive sound space to match the
cinemascope wide-screen, and boasts a broad dynamic range, providing
everything from small delicate sounds to powerful loud booms.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the
latest Sci-Fi and SFX movies. You can enjoy a variety of
cinematographically created virtual spaces reproduced with clear
separation between dialogue, sound effects, and background music.
Adventure
This program is ideal for reproducing the sound design of action and
adventure movies precisely. The sound field restrains reverberations, but
puts emphasis on reproducing a sensation of expansiveness on both sides,
powerful space expanded widely to the left and right. The restrained depth
creates a clear and powerful space, while also maintaining the articulation
of the sounds and the separation of the channels.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Sci-Fi
VOL.
Sound program category
Sound program
“CINEMA DSP” lights up
Drama
This program features stable reverberations that match a wide range of
movie genres, from serious dramas to musicals and comedies. The
reverberations are modest, but suitably stereophonic. The sound effects
and background music are reproduced with a gentle echo that does not
impinge on the articulation of the dialogue. You’ll never get tired listening for
long periods.
Mono Movie
This program reproduces monaural video sources, such as classic movies,
in an atmosphere of a good old movie theater. The program creates a
pleasant space with depth, by adding breadth and the appropriate
reverberation to the original audio.
Sports
This program allows listeners to enjoy the rich vividness of sport broadcasts
and light entertainment programs. In sports broadcasts, the commentators’
voices are positioned clearly at the center, while the atmosphere inside the
stadium is realistically conveyed by the peripheral delivery of the sounds of
the fans in a suitable space.
Action Game
This program is suitable for action games, such as car racing and fighting
games. The reality of, and emphasis on, various effects makes the player
feel like they are right in the middle of the action, allowing for greater
concentration. Use this program in combination with Compressed Music
Enhancer for a more dynamic and strong sound field.
Roleplaying Game
This program is suitable for role-playing and adventure games. This
program adds depth to the sound field for natural and realistic reproduction
of background music, special effects, and dialogue from a wide variety of
scenes. Use this program in combination with Compressed Music
Enhancer for a clearer and more spatial sound field.
00_RX-V479_V579_om_U.book Page 45 Wednesday, March 25, 2015 9:59 AM
En 46
Sound programs suitable for music (MUSIC)
The following sound programs are optimized for listening to music sources.
Sound programs suitable for stereo playback (STEREO)
You can select stereo playback.
CINEMA DSP 3D (p.45) and Virtual CINEMA DSP (p.46) do not work when “2ch Stereo”, “5ch Stereo” or
“7ch Stereo” is selected.
Enjoying sound field effects without surround speakers
(Virtual CINEMA DSP)
If you select one of the sound programs (except 2ch Stereo and 7ch/5ch Stereo) when
no surround speakers are connected, the unit automatically creates the surround sound
field using the front-side speakers.
Enjoying surround sound with 5 speakers placed in
front (Virtual CINEMA FRONT)
You can enjoy the surround sound even when the surround speakers are placed in
front.
Enjoying surround sound with headphones
(SILENT CINEMA)
You can enjoy surround or sound field effects, like a multichannel speaker system, with
stereo headphones by connecting the headphones to the PHONES jack and selecting
a sound program or a surround decoder.
Hall in Munich
This program simulates a Munich concert hall with approximately 2,500
seats that uses stylish wood for the interior finishing. Fine, beautiful
reverberations spread richly, creating a calming atmosphere. The listener’s
virtual seat is at the center left of the arena.
Hall in Vienna
This program simulates a 1700-seat, middle-sized concert hall with a
shoebox shape that is traditional in Vienna. Pillars and ornate carvings
create extremely complex reverberations from all around the audience,
producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling, like an
audience hall in a palace. It offers pleasant reverberations that are suitable
for courtly music and chamber music.
Cellar Club
This program simulates an intimate concert venue with a low ceiling and
homey atmosphere. A realistic, live sound field delivers powerful sounds
that make you feel as if you are sitting in the front row in front of a small
stage.
The Roxy Theatre
This program creates the sound field of a 460-seat rock music concert
venue in Los Angeles. The listener’s virtual seat is at the center left of the
hall.
The Bottom Line
This program creates the sound field at stage front in The Bottom Line, a
famous New York jazz club once. The floor can seat 300 people to the left
and right in a sound field offering real and vibrant sound.
Music Video
This program allows you to enjoy videos of pop, rock, and jazz concerts, as
if you were there yourself. Immerse yourself in the hot concert atmosphere
thanks to the vividness of the singers and solos on stage, a presence
sound field that emphasizes the beat of rhythm instruments, and a surround
sound field that reproduces the space of a big live hall.
2ch Stereo
Use this program to mix down multichannel sources to 2 channels. When
multichannel signals are input, they are down mixed to 2 channels and
output from the front speakers (this program does not utilize CINEMA DSP).
7ch Stereo
5ch Stereo
(RX-V579: 7ch Stereo, RX-V479: 5ch Stereo)
Use this program to output sound from all speakers. When you play back
multichannel sources, the unit mixes down the source to 2 channels, and
then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties.
00_RX-V479_V579_om_U.book Page 46 Wednesday, March 25, 2015 9:59 AM
En 47
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
TO
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
O
OPTION
F
M
/
A
M
V
O
L
U
ME
USB
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
ENTE
R
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
STRAIGHT
PROGRAM
Enjoying unprocessed playback
You can play back input sources without any sound field effect
processing.
Playing back in original channels
(straight decode)
When the straight decode mode is enabled, the unit produces
stereo sound from the front speakers for 2-channel sources such as
CDs, and produces unprocessed multichannel sounds for
multichannel sources.
1
Press STRAIGHT.
Each time you press the key, the straight decode mode is
enabled or disabled.
(RX-V579 only)
To enable 6.1/7.1-channel playback from 5.1-channel sources when surround
back speakers are used, set “Extended Surround” (p.73) in the “Option” menu to a
setting other than “Off”.
Playing back 2-channel sources in
multichannel (surround decoder)
The surround decoder enables unprocessed multichannel
playback from 2-channel sources. When a multichannel source is
input, it works the same way as the straight decode mode.
For details on each decoder see “Glossary” (p.110).
1
Press PROGRAM repeatedly to select a surround
decoder.
The previously selected surround decoder is selected. You
can change the surround decoder in “Sur.Decode” (p.72) in
the “Option” menu.
* RX-V579 only
(RX-V579 only)
You cannot select the Dolby Pro Logic IIx decoders when headphones are
connected or when “Surround Back” in the “Setup” menu is set to “None”.
You can adjust the surround decoder parameters in “DSP Parameter” (p.86)
in the “Setup” menu.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
STRAIGHT
VOL.
bPro Logic
Uses the Dolby Pro Logic decoder suitable for all
sources.
bPLII Movie
Use the Dolby Pro Logic II decoder (or Dolby Pro
Logic IIx decoder) suitable for movies.
bPLIIx Movie*
bPLII Music
Use the Dolby Pro Logic II decoder (or Dolby Pro
Logic IIx decoder) suitable for music.
bPLIIx Music*
bPLII Game
Use the Dolby Pro Logic II decoder (or Dolby Pro
Logic IIx decoder) suitable for games.
bPLIIx Game*
Neo: 6 Cinema Uses the DTS Neo: 6 decoder suitable for movies.
Neo: 6 Music Uses the DTS Neo: 6 decoder suitable for music.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
†‡Pro Logic
VOL.
“SUR. DECODE” appears
00_RX-V479_V579_om_U.book Page 47 Wednesday, March 25, 2015 9:59 AM
En 48
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
O
OPTION
F
M
/
A
M
V
O
L
U
ME
PR
O
G
R
AM
USB
ST
RA
I
G
H
T
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
ENTE
R
BLUE
YELL
OW
LL
G
REE
N
RE
D
Z
O
N
E
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
BASS
DIRECT
ENHANCER
Enjoying pure high fidelity sound
(direct playback)
When the direct playback mode is enabled, the unit plays back the
selected source with the least circuitry in order to reduce the
electrical noise from other circuitry (such as the front display). It
allows you to enjoy Hi-Fi sound quality.
1
Press DIRECT.
Each time you press the key, the direct playback mode is
enabled or disabled.
When the direct playback mode is enabled, the following functions are not
available.
– Selecting sound programs
– Adjusting the tone control
– Operating the on-screen and “Option” menus
– Viewing information on the front display (when not in operation)
Enhancing the bass (
Extra Bass
)
Extra Bass allows you to enjoy enhanced bass sounds, regardless
of the size of the front speakers and the presence or absence of the
subwoofer.
1
Press BASS.
Each time you press the key, Extra Bass is enabled or
disabled.
You can also use “Extra Bass” (p.81) in the “Setup” menu to enable/disable
Extra Bass.
Enjoying compressed music with enhanced
sound (
Compressed Music Enhancer
)
Compressed Music Enhancer adds depth and breadth to the
sound, allowing you to enjoy a dynamic sound close to the original
sound before it was compressed. This function can be used along
with any other sound modes.
1
Press ENHANCER.
Each time you press the key, Compressed Music Enhancer
is enabled or disabled.
Compressed Music Enhancer does not work on the following audio sources.
– Signals whose sampling rate is over 48 kHz
– High-definition streaming audio
You can also use “Enhancer” (p.74) in the “Option” menu to enable/disable
Compressed Music Enhancer.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
DIRECT
VOL.
MUTE
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Enhancer On
VOL.
ENHANCER
“ENHANCER” lights up
00_RX-V479_V579_om_U.book Page 48 Wednesday, March 25, 2015 9:59 AM
En 49
You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
The radio frequencies differ depending on the country or region where the unit is
being used. The explanation of this section uses a display with frequencies used
in U.K. and Europe models.
If you cannot obtain good reception on the radio, adjust the direction of the FM/AM
antennas.
Setting the frequency steps
(Asia, Taiwan and General models only)
At the factory, the frequency step setting is set to 50 kHz for FM and
9 kHz for AM. Depending on your country or region, set the
frequency steps to 100 kHz for FM and 10 kHz for AM.
1
Set the unit to standby mode.
2
When holding down STRAIGHT on the front panel,
press z (power).
3
Press PROGRAM repeatedly to select “TU”.
4
Press STRAIGHT to select “FM100/AM10”.
5
Press z (power) to set the unit to standby mode
and turn it on again.
Selecting a frequency for reception
1
Press FM/AM to select a band.
“TUNER” is selected as the input source and then the
frequency currently selected is displayed.
2
Press TUNING repeatedly to set a frequency.
Hold down the key for about a second to search stations
automatically.
“TUNED” lights up when a signal is received from a radio
station.
“STEREO” also lights up when a stereo signal is received.
You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM
radio reception by selecting “FM Mode” (p.72) in the “Option” menu. When
the signal reception for an FM radio station is unstable, switching to
monaural may improve it.
You can watch videos input from external devices while listening to radio by
selecting the video input jack in “Video Out” (p.75) in the “Option” menu.
Listening to FM/AM radio
z (power)
STRAIGHTPROGRAM
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
TU••••FM50/AM9
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
FM 87.50MHz
VOL.
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
FM 98.50MHz
VOL.
STEREO
TUNED
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
PRE
S
ET
MUTE
MEM
O
R
Y
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RETURN
SETU
P
P
V
O
LUME
PR
OG
R
AM
USB
S
T
RA
I
G
H
T
ENHAN
C
E
R
BA
SS
IN
PU
T
BD
D
V
D
TV
SCE
N
E
R
ADI
O
S
LEEP
ENTER
B
LU
E
YEL
L
OW
LL
G
RE
E
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BLUE
T
O
OT
H
OPTION
TUNING
FM/AM
00_RX-V479_V579_om_U.book Page 49 Wednesday, March 25, 2015 9:59 AM
En 50
Registering favorite radio stations (presets)
You can register up to 40 radio stations as presets. Once you have
registered stations, you can easily tune into them by selecting their
preset numbers.
Registering radio stations automatically
(Auto Preset)
Automatically register FM radio stations with strong signals (up to
40 stations).
To register AM radio stations, follow “Registering a radio station manually”.
(U.K. and Europe models only)
Only Radio Data System broadcasting stations are stored automatically by the
Auto Preset function.
1
Press FM/AM to select “TUNER” as the input
source.
2
Press OPTION.
3
Use the cursor keys to select “Auto Preset”.
4
To start the Auto Preset process, press ENTER.
The registration will start in 5 seconds. Press ENTER again
to start the registration immediately.
To specify the preset number from which to start the registration, press
PRESET or cursor keys (q/w) to select a preset number within 5 seconds
after step 4 (while “READY” is displayed) and then press ENTER (or just
wait for 5 seconds).
To cancel the Auto Preset process, press RETURN.
When the Auto Preset process finishes, “FINISH” appears and the
“Option” menu closes automatically.
Registering a radio station manually
Select a radio station manually and register it to a preset number.
1
Follow “Selecting a frequency for reception” (p.49)
to tune into the desired radio station.
2
Hold down MEMORY for more than 2 seconds.
The first time that you do register a station, the selected
radio station will be registered to the preset number “01”.
Thereafter, each radio station you select will be registered
to the next empty (unused) preset number after the most
recently registered number.
To select a preset number for registering, press MEMORY once after tuning
into the desired radio station, press PRESET to select a preset number, and
then press MEMORY again.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Auto Preset
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
01:FM 87.50MHz
VOL.
“S
EAR
C
H” appears during Auto Preset
Preset number from which to start the registration
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Auto Preset
VOL.
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
01:FM 98.50MHz
STEREO
TUNED
VOL.
Preset number
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
02:Empty
STEREO
TUNED
VOL.
“Empty” (not in use) or the frequency currently registered
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
MUT
E
TUNIN
G
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
SETU
P
P
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
RETURN
Cursor keys
ENTER
OPTION
FM/AM
MEMORY
PRESET
Cursor keys
00_RX-V479_V579_om_U.book Page 50 Wednesday, March 25, 2015 9:59 AM
En 51
Selecting a preset station
Tune into a registered radio station by selecting its preset number.
1
Press FM/AM to select “TUNER” as the input
source.
2
Press PRESET repeatedly to select the desired radio
station.
“No Presets” appears when no radio stations are registered.
Clearing preset stations
Clear radio stations registered to the preset numbers.
1
Press FM/AM to select “TUNER” as the input
source.
2
Press OPTION.
3
Use the cursor keys to select “Clear Preset” and
press ENTER.
4
Use the cursor keys (q/w) to select a preset station
to be cleared and press ENTER.
If the preset station is cleared, “Cleared” appears and then
the next in-use preset number is displayed.
5
Repeat step 4 until all desired preset stations are
cleared.
6
To exit from the menu, press OPTION.
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
01:FM 98.50MHz
STEREO
TUNED
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Clear Preset
VOL.
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
01:FM 98.50MHz
STEREO
TUNED
VOL.
Preset station to be cleared
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
STEREO
TUNED
01:Cleared
VOL.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
Cursor keys
ENTER
OPTION
FM/AM
PRESET
Cursor keys
00_RX-V479_V579_om_U.book Page 51 Wednesday, March 25, 2015 9:59 AM
En 52
Radio Data System
tuning
(U.K. and Europe models only)
Radio Data System is a data transmission system used by FM
stations in many countries. The unit can receive various types of
Radio Data System data, such as “Program Service”, “Program
Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio
Data System broadcasting station.
Displaying the Radio Data System
information
1
Tune into the desired Radio Data System
broadcasting station.
We recommend using “Auto Preset” to tune into the Radio Data System
broadcasting stations (p.50).
2
Press INFO.
Each time you press the key, the displayed item changes.
About 3 seconds later, the corresponding information for
the displayed item appears.
“Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not
displayed if the radio station does not provide the Radio Data System
service.
Receiving traffic information
automatically
When “TUNER” is selected as the input source, the unit
automatically receives traffic information. To enable this function,
follow the procedure below to set the traffic information station.
1
When “TUNER” is selected as the input source,
press OPTION.
2
Use the cursor keys to select “Traffic Program”
(Traffic Program) and press ENTER.
The traffic information station search will start in 5 seconds.
Press ENTER again to start the search immediately.
To search upward/downward from the current frequency, press the cursor
keys (q/w) while “READY” is displayed.
To cancel the search, press RETURN.
Texts in parentheses denote indicators on the front display.
The following screen appears for about 3 seconds when the
search finishes.
“TP Not Found” appears for about 3 seconds when no traffic information
stations are found.
Program Service Program service name
Program Type Current program type
Radio Text Information on the current program
Clock Time Current time
DSP Program Sound mode name
Audio Decoder Decoder name
Frequency Frequency
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Program Type
STEREO
TUNED
VOL.
Item name
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
CLASSICS
STEREO
TUNED
VOL.
Information
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
TP FM101.30MHz
VOL.
STEREO
TUNED
Traffic information station (frequency)
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
SETU
P
P
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
RETURN
Cursor keys
ENTER
OPTION
Cursor keys
00_RX-V479_V579_om_U.book Page 52 Wednesday, March 25, 2015 9:59 AM
En 53
You can play back music files stored on a BLUETOOTH device
(such as smartphones) on the unit.
To use the BLUETOOTH function, set “Bluetooth” (p.94) in the “Setup” menu to
“On”.
For details on supported BLUETOOTH devices, see “Supported devices and file
formats” (p.112).
Playback
BLUETOOTH
device music on the
unit
Follow the procedure below to establish a BLUETOOTH connection
between a BLUETOOTH device (such as smartphones) and the unit,
and play back music stored the BLUETOOTH device on the unit.
The unit does not support video playback via BLUETOOTH.
1
Press BLUETOOTH to select “Bluetooth” as the
input source.
2
On the BLUETOOTH device, select the unit (network
name of the unit) from the available device list.
A connection between the BLUETOOTH device and the
unit will be made.
If the pass key is required, enter the number “0000”.
3
On the BLUETOOTH device, select a song and start
playback.
The playback screen (artist name, album name and song
title) is displayed on the TV.
“Not found” appears when no BLUETOOTH devices are detected.
If the unit detects the BLUETOOTH device previously connected, the unit
automatically connects to the BLUETOOTH device after Step 1. To establish
another BLUETOOTH connection, first terminate the current BLUETOOTH
connection.
To terminate the BLUETOOTH connection, perform one of the following
operations.
– Perform the disconnect operation on the BLUETOOTH device.
– Select an input source other than “Bluetooth” on the unit.
– Select “Disconnect” in “Audio Receive” (p.79) in the “Setup” menu.
You can use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
Playing back music via BLUETOOTH
BLUETOOTH device
(such as smartphones)
The unit
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
ENTE
R
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
External device
operation keys
BLUETOOTH
External device
operation keys
00_RX-V479_V579_om_U.book Page 53 Wednesday, March 25, 2015 9:59 AM
En 54
You can play back iPod music on the unit using a USB cable
supplied with the iPod.
You can also play back iPod music in other methods. For details,
see the following pages.
Playing back music with AirPlay (p.57)
Playing back music stored on a BLUETOOTH device (p.53)
AV CONTROLLER (p.6)
You cannot play back iPod video on the unit.
For details on playable iPod devices, see “Supported devices and file formats”
(p.112).
Connecting an
iPod
Connect your iPod to the unit with the USB cable supplied with the
iPod.
1
Connect the USB cable to the iPod.
2
Connect the USB cable to the USB jack.
The iPod charges while it is connected to the unit. If you set the unit to standby
mode while the iPod is charging, the iPod continues to charge up to 4 hours.
If “Network Standby” (p.93) in the “Setup” menu is set to “On”, it continues to
charge without limit.
Disconnect the iPod from the USB jack when it is not in use.
Playback of
iPod
content
Follow the procedure below to operate the iPod contents and start
playback.
You can control the iPod with the menu displayed on the TV screen.
Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display, or directly
operate the iPod itself in the simple play mode (p.56).
“_” (underscore) will be displayed for characters not supported by the unit.
1
Press USB to select “USB” as the input source.
The browse screen (p.55) is displayed on the TV.
If playback is ongoing on your iPod, the playback screen is displayed.
2
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen (p.55) is displayed.
To return to the previous screen, press RETURN.
To switch the screen mode browse/playback/off, press DISPLAY.
To operate the iPod manually to select content or control playback, switch to
the simple play mode (p.56).
Playing back iPod music
RADIO
STRAIGHT
AUDIO
AUX
5V 1A
(CONNECT)
The unit (front)
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Connected
VOL.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
SETU
P
P
O
OPTION
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
RETURN
Cursor keys
ENTER
USB
DISPLAY
Cursor keys
00_RX-V479_V579_om_U.book Page 54 Wednesday, March 25, 2015 9:59 AM
En 55
Browse screen
1 List name
2 Contents list
Displays the list of iPod content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
3 Item number/total
4 Status indicators
Display the current repeat/shuffle settings (p.56) and playback status
(such as play/pause).
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
A content selected by the cursor is displayed on the front display.
Playback screen
1 Status indicators
Display the current repeat/shuffle settings (p.56) and playback status
(such as play/pause).
2 Playback information
Displays the artist name, album name, song title, and elapsed time/song
length.
Use the following remote control keys to control playback.
A content name of a current playback is displayed on the front display. To switch
the displayed item, press INFO (p.71).
Icon Function
Moves 10 pages backward.
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
1
4
5
2
3
Playlists
Artists
Albums
Songs
Genres
Composers
iPod
Music
[DISPLAY] to Now Playing
1/6
External device
operation keys
Function
a Resumes playback from pause.
s Stops playback.
d Stops playback temporarily.
f
Skips forward/backward.
g
h
Searches forward/backward (by holding down).
j
1
2
iPod
Now Playing
Artist Name
Album Name
Song Title
2:30
5:10
[DISPLAY] : Screen Off
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
PRE
S
ET
M
U
T
E
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
S
ET
U
P
P
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
S
T
RA
IGH
T
E
NHAN
C
E
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIRE
C
T
ZONE
AZ
O
NE
B
NET
N
E
T
BL
UE
T
O
OT
H
Cursor keys
ENTER
External device
operation keys
Cursor keys
External device
operation keys
00_RX-V479_V579_om_U.book Page 55 Wednesday, March 25, 2015 9:59 AM
En 56
Operating the iPod itself (simple play)
1
Press OPTION.
2
Use the cursor keys to select “iPod Mode” and
press ENTER.
The TV menu screen turns off and iPod operations are
enabled.
To display the TV menu screen, select “iPod Mode” and
press ENTER again.
3
Operate your iPod itself to start playback.
Repeat/shuffle settings
You can configure the repeat/shuffle settings of your iPod.
During simple play, configure the repeat/shuffle settings directly on your iPod.
1
When “USB” is selected as the input source, press
OPTION.
2
Use the cursor keys to select “Repeat” (Repeat) or
“Shuffle” (Shuffle) and press ENTER.
To return to the previous screen during menu operations, press RETURN.
Texts in parentheses denote indicators on the front display.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Item Setting Function
Repeat
(Repeat)
Off (Off) Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
c” appears in the TV screen.
All (All)
Plays back all songs repeatedly.
v” appears in the TV screen.
Shuffle
(Shuffle)
Off (Off) Turns off the shuffle function.
Songs (Songs)
Plays back songs in random order.
x” appears in the TV screen.
Albums
(Albums)
Plays back albums in random order.
x” appears in the TV screen.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
SETU
P
P
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
RETURN
Cursor keys
ENTER
OPTION
Cursor keys
00_RX-V479_V579_om_U.book Page 56 Wednesday, March 25, 2015 9:59 AM
En 57
The AirPlay function allows you to play back iTunes or iPhone/iPad/iPod touch music on
the unit via network.
To use this function, the unit and your PC or iPod must be connected to the same router (p.25). You can
check whether the network parameters (such as the IP address) are properly assigned to the unit in
“Information” (p.92) in the “Setup” menu.
If the iPod does not recognize the unit, check your network environment (p.25).
This section describes “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod touch”,
“iPhone” and “iPad”, unless otherwise specified.
For details on supported iPod devices, see “Supported devices and file formats” (p.112).
Playback of
iTunes
/
iPod
music contents
Follow the procedure below to play back iTunes/iPod music contents on the unit.
1
Turn on the unit, and start iTunes on the PC or display the playback
screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay icon ( ) appears.
If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.
2
On the iTunes/iPod, click (tap) the AirPlay icon and select the unit
(network name of the unit) as the audio output device.
3
Select a song and start playback.
The unit automatically selects “AirPlay” as the input source and starts playback.
The playback screen is displayed on the TV.
The playback screen is available only when your TV is connected to the unit via
HDMI
.
Playing back music with AirPlay
PC
iTunes
Router
iPhone/iPad/iPod touch
The unit
(Wired network or wireless network)
iTunes (example) iPod iOS7/iOS8 (example) iPod iOS6 (example)
00_RX-V479_V579_om_U.book Page 57 Wednesday, March 25, 2015 9:59 AM
En 58
You can turn on the unit automatically when starting playback on iTunes or iPod
by setting “Network Standby” (p.93) in the “Setup” menu to “On”.
You can edit the network name (the unit’s name on the network) displayed on
iTunes/iPod in “Network Name” (p.93) in the “Setup” menu.
If you select the other input source on the unit during playback, playback on the
iTunes/iPod stops automatically.
You can adjust the unit’s volume from the iTunes/iPod during playback. To disable
volume controls from iTunes/iPod, set “Volume Interlock” (p.75) in the “Option”
menu to “Off”.
Playback screen
1 Playback indicator
2 Playback information
Displays the artist name, album name, song title, and elapsed time/song
length.
Use the following remote control keys to control playback.
To control iTunes playback with the remote control of the unit, you need to
configure the iTunes preferences to enable iTunes control from remote speakers
in advance.
Caution
When you use iTunes/iPod controls to adjust volume, the volume may be
unexpectedly loud. This could result in damage to the unit or speakers. If the
volume suddenly increases during playback, stop playback on the iTunes/iPod
immediately.
2
1
Artist Name
Album Name
Song Title
2:30
AirPlay
Now Playing
5:30
External device
operation keys
Function
a Resumes playback from pause.
s Stops playback.
d Stops playback temporarily.
f
Skips forward/backward.
g
iTunes (example of English version)
Check this box
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
O
OPTION
F
M
/
A
M
V
O
L
U
ME
PR
O
G
R
AM
USB
S
T
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
ENTE
R
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
N
E
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
External d evice
operation keys
External device
operation keys
00_RX-V479_V579_om_U.book Page 58 Wednesday, March 25, 2015 9:59 AM
En 59
You can play back music files stored on a USB storage device on
the unit.
For details on playable USB devices, see “Supported devices and file formats”
(p.112).
Connecting a
USB
storage device
1
Connect the USB storage device to the USB jack.
If the USB storage device contains many files, it may take time to load them. In
this case, “Loading...” appears in the front display.
Stop playback of the USB storage device before disconnect it from the USB jack.
Connect a USB storage device directly to the USB jack of the unit. Do not use
extension cables.
Playback of
USB
storage device contents
Follow the procedure below to operate the USB storage device
contents and start playback.
You can control the USB memory device with the menu displayed
on the TV screen.
Operations with TV screen are available only when your TV is connected to the
unit via HDMI.
“_” (underscore) will be displayed for characters not supported by the unit.
1
Press USB to select “USB” as the input source.
The browse screen (p.60) is displayed on the TV.
If playback is ongoing on your USB storage device, the playback screen is
displayed.
2
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen (p.60) is displayed.
To return to the previous screen, press RETURN.
To switch the screen mode browse/playback/off, press DISPLAY.
Files not supported by the unit cannot be selected.
Playing back music stored on a USB storage device
STRAIGHT
(CONNECT)
AUX
AUDI O
5V 1A
RADIO
The unit (front)
USB storage device
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
SETU
P
P
O
OPTION
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
RETURN
Cursor keys
ENTER
USB
DISPLAY
Cursor keys
00_RX-V479_V579_om_U.book Page 59 Wednesday, March 25, 2015 9:59 AM
En 60
Browse screen
1 List name
2 Contents list
Displays the list of USB storage device contents. Use the cursor keys to
select an item and press ENTER to confirm the selection.
3 Item number/total
4 Status indicators
Display the current repeat/shuffle settings (p.61) and playback status
(such as play/pause).
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
A content selected by the cursor is displayed on the front display.
Playback screen
1 Status indicators
Display the current repeat/shuffle settings (p.61) and playback status
(such as play/pause).
2 Playback information
Displays the artist name, album name, song title, and elapsed time.
Use the following remote control keys to control playback.
A content name of a current playback is displayed on the front display. To switch
the displayed item, press INFO (p.71).
Icon Function
Moves 10 pages backward.
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
14
5
2
3
[DISPLAY] to Now Playing
1/12
Blues
Classical
Electronica
Jazz
Pop
Rock
Soundtrack
Speaking
USB
Top
External device
operation keys
Function
a Resumes playback from pause.
s Stops playback.
d Stops playback temporarily.
f
Skips forward/backward.
g
1
2
USB
Now Playing
Artist Name
Album Name
Song Title
2:30
[DISPLAY] : Screen Off
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SET
U
P
P
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
I
G
H
T
E
NHAN
C
E
R
BASS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BL
UE
YEL
L
OW
LL
G
REEN
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BL
UE
T
O
OT
H
Cursor keys
ENTER
External d evice
operation keys
Cursor keys
External device
operation keys
00_RX-V479_V579_om_U.book Page 60 Wednesday, March 25, 2015 9:59 AM
En 61
Repeat/shuffle settings
You can configure the repeat/shuffle settings for playback of USB
storage device contents.
1
When “USB” is selected as the input source, press
OPTION.
2
Use the cursor keys to select “Repeat” (Repeat) or
“Shuffle” (Shuffle) and press ENTER.
To return to the previous screen during menu operations, press RETURN.
Texts in parentheses denote indicators on the front display.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Item Setting Function
Repeat
(Repeat)
Off (Off) Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly.
v” appears on the TV screen.
Shuffle
(Shuffle)
Off (Off) Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order.
x” appears on the TV screen.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
SETU
P
P
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
RETURN
Cursor keys
ENTER
OPTION
Cursor keys
00_RX-V479_V579_om_U.book Page 61 Wednesday, March 25, 2015 9:59 AM
En 62
You can play back music files stored on your PC or DLNA-compatible NAS on the unit.
To use this function, the unit and your PC must be connected to the same router (p.25). You can check
whether the network parameters (such as the IP address) are properly assigned to the unit in “Information”
(p.92) in the “Setup” menu.
The audio may be interrupted while using the wireless network connection. In this case, use the wired
network connection.
For details on playable file formats, see “Supported devices and file formats” (p.112).
Media sharing setup
To play back music files stored on your PC or DLNA-compatible NAS, first you need to
configure the media sharing setting on each music server.
For a PC with Windows Media Player installed
For Windows Media Player 12
1
Start Windows Media Player 12 on your PC.
2
Select “Stream”, then “Turn on media streaming”.
3
Click “Turn on media streaming”.
4
Select “Allowed” from the drop-down list next to the unit’s model
name.
5
Click “OK” to exit.
For Windows Media Player 11
1
Start Windows Media Player 11 on your PC.
2
Select “Library”, then “Media Sharing”.
3
Check the “Share my media to” box, select the unit’s icon, and click
“Allow”.
4
Click “OK” to exit.
For details on media sharing settings, refer to Windows Media Player help.
For a PC or a NAS with other DLNA server software
installed
Refer to the instruction manual for the device or software and configure the media
sharing settings.
Playing back music stored on media servers (PCs/NAS)
00_RX-V479_V579_om_U.book Page 62 Wednesday, March 25, 2015 9:59 AM
En 63
Playback of PC music contents
Follow the procedure below to operate the PC music contents and
start playback.
You can control the PC/NAS with the menu displayed on the TV
screen.
Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display.
“_” (underscore) will be displayed for characters not supported by the unit.
1
Press NET repeatedly to select “SERVER” as the
input source.
The browse screen (p.63) is displayed on the TV.
If playback of a music file selected from the unit is ongoing on your PC, the
playback screen is displayed.
2
Use the cursor keys to select a music server and
press ENTER.
3
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen (p.64) is displayed.
To return to the previous screen, press RETURN.
To switch the screen mode browse/playback/off, press DISPLAY.
Files not supported by the unit cannot be selected.
Browse screen
1 List name
2 Contents list
Displays the list of PC content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
3 Item number/total
4 Status indicators
Display the current repeat/shuffle settings (p.64) and playback status
(such as play/pause).
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Icon Function
Moves 10 pages backward.
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
14
5
2
3
[DISPLAY] to Now Playing
1/14
Blues
Classical
Electronica
Jazz
Pop
Rock
Soundtrack
Speaking
SERVER
NAS A
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
SETU
P
P
O
OPTION
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
N
E
T
BLUE
T
O
OT
H
RETURN
Cursor keys
ENTER
DISPLAY
NET
Cursor keys
00_RX-V479_V579_om_U.book Page 63 Wednesday, March 25, 2015 9:59 AM
En 64
Playback screen
1 Status indicators
Display the current repeat/shuffle settings (p.64) and playback status
(such as play/pause).
2 Playback information
Displays the artist name, album name, song title, and elapsed time.
Use the following remote control keys to control playback.
You can also use a DLNA-compatible Digital Media Controller (DMC) to control
playback. For details, see “DMC Control” (p.93).
Repeat/shuffle settings
You can configure the repeat/shuffle settings for the playback of PC
music content.
1
When “SERVER” is selected as the input source,
press OPTION.
2
Use the cursor keys to select “Repeat” (Repeat) or
“Shuffle” (Shuffle) and press ENTER.
To return to the previous screen during menu operations, press RETURN.
Text in parentheses denotes indicators on the front display.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
External device
operation keys
Function
a Resumes playback from pause.
s Stops playback.
d Stops playback temporarily.
f
Skips forward/backward.
g
1
2
SERVER
Now Playing
Artist Name
Album Name
Song Title
2:30
[DISPLAY] : Screen Off
Item Setting Function
Repeat
(Repeat)
Off (Off) Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly.
v” appears on the TV screen.
Shuffle
(Shuffle)
Off (Off) Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order.
x” appears on the TV screen.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
S
ET
U
P
P
FM
/
A
M
V
O
L
U
ME
P
R
OGR
A
M
USB
S
T
RA
I
G
H
T
E
NHAN
C
E
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BL
UE
YEL
L
OW
LL
G
R
EEN
R
E
D
DIRE
C
T
Z
O
N
E
AZ
O
NE
B
NET
N
E
T
BL
UE
T
O
OT
H
Cursor keys
ENTER
OPTION
RETURN
External d evice
operation keys
Cursor keys
External device
operation keys
00_RX-V479_V579_om_U.book Page 64 Wednesday, March 25, 2015 9:59 AM
En 65
You can listen to Internet radio stations from all over the world.
Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display.
To use this function, the unit must be connected to the Internet (p.25). You can
check whether the network parameters (such as the IP address) are properly
assigned to the unit in “Information” (p.92) in the “Setup” menu.
You may not be able to receive some Internet radio stations.
The unit uses the vTuner Internet radio station database service.
This service may be discontinued without notice.
Playback of Internet radio
Follow the procedure below to select an Internet radio station and
start playback.
You can control the Internet radio with the menu displayed on the
TV screen.
1
Press NET repeatedly to select “NET RADIO” as the
input source.
The browse screen (p.65) is displayed on the TV.
2
Use the cursor keys to select an item and press
ENTER.
If an Internet radio station is selected, playback starts and
the playback screen (p.66) is displayed.
To return to the previous screen, press RETURN.
To switch the screen mode browse/playback/off, press DISPLAY.
Browse screen
1 List name
2 Contents list
Displays the list of Internet radio content. Use the cursor keys to select an
item and press ENTER to confirm the selection.
3 Item number/total
4 Playback indicator
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Listening to Internet radio
Icon Function
Moves 10 pages backward.
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
14
5
2
3
[DISPLAY] to Now Playing
1/7
Bookmarks
Locations
Genres
New Stations
Popular Stations
Podcasts
Help
NET RADIO
Top
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
SETU
P
P
O
OPTION
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
N
E
T
BLUE
T
O
OT
H
RETURN
Cursor keys
ENTER
DISPLAY
NET
Cursor keys
00_RX-V479_V579_om_U.book Page 65 Wednesday, March 25, 2015 9:59 AM
En 66
Playback screen
1 Playback indicator
2 Playback information
Displays the station name, album name, song title, and elapsed time.
Use the external device operation key (s) to stop playback.
Some information may not be available depending on the station.
1
2
Station Name
Album Name
Song Title
2:30
NET RADIO
Now Playing
[DISPLAY] : Screen Off
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
S
T
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
ENTE
R
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
External device
operation keys
External device
operation keys
00_RX-V479_V579_om_U.book Page 66 Wednesday, March 25, 2015 9:59 AM
En 67
Registering favorite Internet radio stations (bookmarks)
You can register your favorite Internet radio stations to the
“Bookmarks” folder.
Registering the station with the Option
menu
Follow the procedure below to register your favorite station to the
“Bookmarks” folder.
1
While listening to Internet radio, press OPTION.
2
Use the cursor keys to select “Bookmark On” and
press ENTER.
On the playback screen, the current station is added to the “Bookmarks” folder. On
the browse screen, the station selected in the list is added to the “Bookmarks”
folder.
To remove stations from the “Bookmarks” folder, select the station in the folder and
then “Bookmark Off”.
Registering the station on the vTuner
website
You can also register your favorite Internet radio stations on the
vTuner website.
1
Select any of Internet radio stations on the unit.
This operation is necessary to register the radio station for
the first time.
2
Check the vTuner ID of the unit.
You can find the vTuner ID in “Information” (p.92) in the
“Setup” menu.
3
Access the vTuner website
(http://yradio.vtuner.com/) with the web browser on
your PC and enter the vTuner ID.
To use this feature, you need to create your personal account. Create your
account using your e-mail address.
4
Register your favorite radio stations.
Click the “Add” icon (
+) next to the station name.
To remove the station from the “Bookmarks” folder, select “Bookmarks” in
the Home screen, and then click the “Remove” icon (
–) next to the station
name.
You can switch the language.
Enter the vTuner ID in this area.
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
TUNIN
G
PRE
S
ET
MUT
E
TUNIN
G
MEM
O
RY
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
SETU
P
P
F
M
/
A
M
V
O
L
U
ME
PR
O
GR
AM
USB
ST
RA
I
G
H
T
ENHANCE
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BLUE
YELL
OW
LL
G
REE
N
RE
D
DIRE
C
T
Z
O
NE
AZ
O
NE
B
NET
N
E
T
BLUE
T
O
OT
H
Cursor keys
ENTER
OPTION
Cursor keys
00_RX-V479_V579_om_U.book Page 67 Wednesday, March 25, 2015 9:59 AM
En 68
The Zone A/B function allows you to play back an input source in the room where the
unit is installed (Zone A) and in another room (Zone B).
For example, you can turn on Zone A (turn off Zone B) when you are in the living room,
and turn on Zone B (turn off Zone A) when you are in the study room. Also, you can turn
on both zones when you want to enjoy the same input source in those rooms
simultaneously.
Multichannel sources are mixed down to 2 channels and output to the Zone B.
The same input source is applied to both Zone A and Zone B.
By default, the volume for Zone B changes in conjunction with the volume for Zone A. If there is volume
difference between Zone A/B, you can correct it in “ZoneB Trim” in the “Option” menu (p.69). Also, you can
adjust the volume for Zone B separately (p.69).
You can automatically enable/disable the audio output to Zone A/B in conjunction with a scene selection
(p.43)
Connecting
Zone B
speakers
Connect the device that will be used in Zone B to the unit.
Connect the speakers placed in Zone B to the unit with speaker cables.
To utilize the SURROUND BACK/BI AMP/ZONE B jacks for Zone B speakers, set
“Power Amp Assign” (p.80) in the “Setup” menu to “Zone B” after connecting the power
cable to an AC wall outlet.
Surround back speakers or bi-amplified front speakers cannot be used while the Zone B function is
enabled.
Playing back music in multiple rooms (RX-V579 only)
Living room (Zone A)
Study room (Zone B)
Caution
Remove the unit’s power cable from the AC wall outlet before connecting speakers.
Ensure that the core wires of the speaker cable do not touch one another or come into contact with the
unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit,
“Check SP Wires” will appear on the front display when the unit is turned on.
12
12
39
45
FRONT CENTER SURROUND
SINGLE
SURROUND BACK/BI AMP
/ZONE B
OR OUT
P
B
Y
SPEAKERS
SUBWOOFER
PRE OUT
2
1
DC OUT
5V 0.5A
The unit (rear)
Zone A
Zone B
00_RX-V479_V579_om_U.book Page 68 Wednesday, March 25, 2015 9:59 AM
En 69
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
H
OM
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
SETU
P
P
P
R
OG
R
A
M
S
T
RA
I
G
H
T
E
NHAN
C
E
R
BA
SS
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
BL
UE
YEL
L
OW
LL
G
R
E
E
N
R
E
D
DIRE
C
T
NET
Cursor keys
ENTER
OPTION
Input selection keys
ZONE A
ZONE B
VOLUME
MUTE
RETURN
z z
Operating the
Zone B
Basic playback procedure
1
Slide the Zone switch to “ZONE B”.
2
Press z (receiver power).
Each time you press the key, the ZONE B audio output is
on or off.
3
Use the input selection keys to select an input
source.
4
Start playback on the external device or select a
radio station.
5
Press VOLUME to adjust the volume.
Correcting volume difference between
Zone A and Zone B
If you are bothered by volume difference between Zone A/B, follow
the procedure below to adjust the volume for Zone B.
1
Press OPTION.
2
Use the cursor keys to select “Volume Trim”
(Volume Trim) and press ENTER.
To return to the previous screen during menu operations, press RETURN.
Text in parentheses denotes indicators on the front display.
3
Use the cursor keys (q/w) to select “ZoneB Trim”
(ZB.Trim) and the cursor keys (e/r) to adjust the
setting.
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
0.0 dB
4
To exit from the menu, press OPTION.
This setting is not effective when “ZoneB Volume” (p.88) in the “Setup”
menu is set to “Async.”.
Adjusting the volume for Zone B
separately
You can separately adjust the volume for Zone B using the remote
control when “ZoneB Volume” (p.88) in the “Setup” menu is set to
“Async.”.
1
Slide the Zone switch to “ZONE B”.
2
Press VOLUME to adjust the volume for Zone B.
To mute the audio output to Zone B, press MUTE.
The volume of the Zone B is not displayed on the front display.
1 2
PARTY
VIRTUAL
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
23
ZONE
A
ZONE
B
VOL.
HDMI1
“ZONE B” lights up
Cursor keys
Input selection
keys
00_RX-V479_V579_om_U.book Page 69 Wednesday, March 25, 2015 9:59 AM
En 70
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
M
U
T
E
T
U
NIN
G
T
O
P
MENU
H
O
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
S
ET
U
P
P
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
S
T
RA
IGH
T
E
NHAN
C
E
R
BA
SS
IN
PU
T
BD
DV
D
TV
SC
E
N
E
R
ADI
O
S
LEEP
ENTER
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIRE
C
T
ZONE
AZ
O
NE
B
NET
USB
NET
BLUETOOTH
MEMORY
PRESET
Registering favorite items (shortcut)
You can register up to 40 favorite USB and network contents as
shortcuts and access them directly by selecting the shortcut
numbers.
You can also use the “Bookmark” feature to register Internet radio stations (p.67).
BLUETOOTH and AirPlay are applied to the input source. You cannot register
particular songs in the device individually.
Registering an item
Select a desired item and register it to a shortcut number.
1
Play back a song or a radio station to be registered.
2
Hold down MEMORY for 3 seconds.
To change a shortcut number to which the item will be registered, use
PRESET to select the shortcut number after step 2.
3
To confirm the registration, press MEMORY.
Recalling a registered item
Recall a registered item by selecting the shortcut number.
1
Press BLUETOOTH, NET or USB.
2
Press PRESET repeatedly to select a desired item.
“No Presets” appears when no items are registered.
The registered item cannot be recalled in the following cases.
A USB storage device which contains the registered item is not connected
to this unit.
– A PC which contains the registered item is turned off or not connected to
the network.
The registered network content is temporarily unavailable or out of service.
– The registered item (file) has been deleted or moved to another location.
– A BLUETOOTH connection cannot be established.
When you register music files stored on a USB storage device or a PC, this
unit memorizes the relative position of the music files in the folder. If you
have added or deleted any music files to or from the folder, this unit may not
recall the music file correctly. In such cases, register the items again.
Useful functions
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
01:Empty
VOL.
Shortcut number (flashes)
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
02:Empty
VOL.
“Empty” (not in use) or item currently registered
MUTE
ENHANCER
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
01:USB
VOL.
00_RX-V479_V579_om_U.book Page 70 Wednesday, March 25, 2015 9:59 AM
En 71
Switching information on the front display
1
Press INFO.
Each time you press the key, the displayed item changes.
About 3 seconds later, the corresponding information for the displayed item
appears.
Available items vary depending on the selected input source. The displayed item can also be applied
separately to each input source group.
* The name of the audio decoder currently activated is displayed. If no audio decoder is activated, “Decoder
Off” appears.
**RX-V479 only
Input source group Item
HDMI
AV
AUX
AUDIO **
Input (input source name), DSP Program (sound mode name), Audio
Decoder (decoder name*)
BLUETOOTH
USB
SERVER
AirPlay
Song (song title), Artist (artist name), Album (album name), DSP Program
(sound mode name), Audio Decoder (decoder name*)
During simple playback of iPod:
Input (input source name), DSP Program (sound mode name), Audio
Decoder (decoder name)
NET RADIO
Song (song title), Album (album name), Station (station name), DSP
Program (sound mode name), Audio Decoder (decoder name*)
TUNER
Frequency (frequency), DSP Program (sound mode name), Audio Decoder
(decoder name*)
(U.K. and Europe models only)
Radio Data System
data is also available when the unit is tuned into a
Radio
Data System
broadcasting station (p.52).
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Audio Decoder
VOL.
Item name
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
†‡Pro Logic
VOL.
Information
00_RX-V479_V579_om_U.book Page 71 Wednesday, March 25, 2015 9:59 AM
En 72
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
Front display
TV screen
2
Use the cursor keys to select an item and press ENTER.
To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Option
menu items
Available items vary depending on the selected input source.
Text in parentheses denotes indicators on the front display.
Default settings are underlined.
Depending on the region of purchase, some menu items for audio streaming services are also available.
For details, refer to each manual on the supplied CD-ROM.
Configuring playback settings for different playback sources (Option menu)
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
VOL.
Input Select
Input Select
Tone Control
DSP/Surround
Volume Trim
Lipsync
Signal Info
Audio In
Option
Item Function Page
Input Select (Input) Switches the input source. 73
Tone Control (Tone Control)
Adjusts the high-frequency range and low-frequency
range of sounds.
73
DSP/Surround
(DSP/Surround)
Program (PRG) Select the sound programs and stereo playback. 45
Sur.Decode
(SrDec)
Select which surround decoder is used when
Sur.Decode is selected as the program.
47
DSP Level
(DSP Level)
Adjusts the sound field effect level. 73
Adaptive DRC
(A.DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the volume
is adjusted.
73
Extended
Surround
(EXTD)
(RX-V579 only)
Selects how to play back 5.1- to 7.1-channel sources
when surround back speakers are used.
73
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. 74
Volume Trim
(Volume Trim)
Input Trim
(In.Trim)
Corrects volume differences between input sources. 74
Subwoofer Trim
(SW.Trim)
Fine-adjusts the subwoofer volume. 74
ZoneB Trim
(ZB.Trim)
(RX-V579 only)
Corrects volume differences between Zone A/B.
69
Lipsync (Lipsync)
Enables/disables the “Lipsync” setting in the “Setup”
menu.
74
Signal Info (Signal Info) Displays information about the video/audio signal. 74
Audio In (Audio)
Combines the video jack of the selected input source
with an audio jack of others.
75
Video Out (Video) Selects a video to be output with radio sounds. 75
FM Mode (FM Mode)
Switches between “
Stereo
” and “
Mono
” for FM radio reception.
49
Auto Preset (Auto Preset)
Automatically registers FM radio stations with strong
signals as presets.
50
Clear Preset (Clear Preset) Clear radio stations registered to preset numbers. 51
00_RX-V479_V579_om_U.book Page 72 Wednesday, March 25, 2015 9:59 AM
En 73
Input Select (Input)
Switches the input source. Press ENTER to switch to the selected input source.
Choices (RX-V579)
HDMI 1-6, AV 1-6, TUNER, USB, SERVER, NET RADIO, Airplay, (network sources), Bluetooth,
AUX
Choices (RX-V479)
HDMI 1-6, AUDIO 1-2, AV 1-4, TUNER, USB, SERVER, NET RADIO, Airplay, (network sources),
Bluetooth, AUX
Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to Bypass (Bypass)
to +6.0 dB (0.5 dB increments)
You can also adjust the tone with the front panel controls. Press TONE CONTROL to select “Treble” or
“Bass”, then press PROGRAM to make an adjustment.
If you set an extreme value, sounds may not match those from other channels.
DSP/Surround (DSP/Surround)
Configures the sound field program and surround settings.
DSP Level (DSP Level)
Adjusts the sound field effect level.
Setting range
-6 dB to 0 dB
to +3 dB
Adaptive DRC (A.DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, it is useful for listening to
playback at a low volume at night.
Settings
If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a
high volume.
Extended Surround (EXTD)
(RX-V579 only)
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers
are used.
The system (5.1-channel system) which does not use surround back speakers
reproduces 5.1- to 7.1-channel signals using the Virtual Surround Back Speaker (VSBS)
function. In this case, select “Auto” or “EX/ES”.
Settings
Traffic Program
(Traffic Program)
(U.K. and Europe models only)
Automatically searches for a traffic information station.
52
iPod Mode (iPod Mode) Switches the iPod operation mode. 56
Repeat (Repeat)
Configures the repeat setting for the iPod (p.56),
USB storage device (p.61), or media server (p.64).
Shuffle (Shuffle)
Configures the shuffle setting for the iPod (p.56),
USB storage device (p.61), or media server (p.64).
Volume Interlock (Interlock)
Enables/disables volume controls from iTunes/iPod
via AirPlay.
75
Bookmark On (Bookmark On)
Bookmark Off (Bookmark Off)
Adds your favorite Internet radio station to the
“Bookmarks” folder, or removes it from the
“Bookmarks” folder.
67
Item Function Page
On (On) Automatically adjusts the dynamic range.
Off (Off)
The dynamic range is not automatically adjusted.
Auto (Auto)
Automatically selects the most suitable decoder if signals that contain
surround back channel signals are input, and reproduces the signals
in 6.1- or 7.1-channel. If two surround back speakers are connected,
the unit reproduces the 5.1-channel signals in 7.1-channel.
bPLIIx Movie
(bPLIIxMo)
Always reproduces signals in 7.1-channel using the Dolby Pro Logic
IIx decoder. This setting is available only when two surround back
speakers are connected.
bPLIIx Music
(bPLIIxMu)
Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
Logic IIx Music decoder. This setting is available only when one or two
surround back speakers are connected.
00_RX-V479_V579_om_U.book Page 73 Wednesday, March 25, 2015 9:59 AM
En 74
Some early Dolby Digital Surround EX or DTS-ES sources do not contain a flag for reproducing surround
back channel. We recommend you set “Extended Surround” to “bPLIIx Movie” or “EX/ES” when playing
back those sources.
Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer (p.48).
This setting is applied separately to each input source.
You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer
(p.48).
Settings
Default
TUNER, USB, SERVER, NET RADIO, AirPlay (network sources), Bluetooth: On (On)
Others: Off (Off)
Volume Trim (Volume Trim)
Fine-adjusts volume difference between input sources or subwoofer volume.
Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
This setting is applied separately to each input source.
Setting range
-6.0 dB to 0.0 dB
to +6.0 dB (0.5 dB increments)
Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to 0.0 dB
to +6.0 dB (0.5 dB increments)
Lipsync (Lipsync)
Enables/disables the adjustment configured in “Lipsync” (p.87) in the “Setup” menu.
This setting is applied separately to each input source.
Settings
Default
AirPlay: Off (Off)
Others: On (On)
Signal Info (Signal Info)
Displays information about the video/audio signal.
Choices
To switch the information on the front display, press the cursor keys (q/w) repeatedly.
EX/ES (EX/ES)
Automatically selects the Dolby EX or DTS-ES decoder, and
reproduces signals in 6.1- or 7.1-channel.
Off (Off)
Always reproduces signals in their original channels. (Even when
DTS-ES or Dolby Digital Surround EX signal is input, the unit
reproduces the signal in 5.1-channel.)
Off (Off) Disables Compressed Music Enhancer.
On (On) Enables Compressed Music Enhancer.
Off (Off) Disables the “Lipsync” adjustment.
On (On) Enables the “Lipsync” adjustment.
Format (FORMAT) Audio format of the input signal
Channel (CHANNEL)
The number of source channels in the input signal
(front/surround/LFE)
For example, “3/2/0.1” means 3 front channels, 2 surround channels,
and LFE.
Sampling
(SAMPLING)
The number of samples per second of the input digital signal
Bitrate (BITRATE) The amount of data per second of the input bitstream signal
Video In (VIDEO IN) Type and resolution of the input digital signal
Video Out
(VIDEO OUT)
Type and resolution of the output digital signal
00_RX-V479_V579_om_U.book Page 74 Wednesday, March 25, 2015 9:59 AM
En 75
Audio In (Audio)
Combines the video jack of the selected input source (HDMI 1-6 or AV 1-6) with an
audio jack of others. For example, use this function in the following cases.
Connecting a playback device that supports HDMI video output, but not HDMI audio
output
Connecting a playback device that has component video jacks and analog stereo
jacks (such as game consoles)
Input sources (RX-V579)
HDMI 1-6, AV 1-6
Input sources (RX-V479)
HDMI 1-6, AUDIO 1-2, AV 1-4
Setup procedure
See “Changing the combination of video/audio input jacks” (p.22).
Video Out (Video)
Selects a video to be output with the selected audio source. For example, you can
watching the video while listening to the radio.
Input sources
TUNER, USB, Bluetooth, AUX
Settings
Volume Interlock (Interlock)
Enables/disables volume controls from iTunes/iPod via AirPlay.
Settings
Off (Off)
Does not output video.
HDMI 1-6,
AV 1-6 (RX-V579),
AV 1-4 (RX-V479)
Outputs video input through the corresponding video input jacks.
Off (Off) Disables volume controls from iTunes/iPod.
Limited (Ltd)
Enables volume controls from iTunes/iPod within the limited range
(-80 dB to -20 dB and mute).
Full (Full)
Enables volume controls from iTunes/iPod in the full range
(-80 dB to +16.5 dB and mute).
06_playback.fm Page 75 Monday, April 13, 2015 9:14 AM
En 76
CONFIGURATIONS
You can configure the unit’s various function with the menu displayed on the TV screen.
Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry
out operations while viewing the front display.
If new firmware is available, the envelope icon (p) appears in the screen.
1
Press SETUP.
2
Use the cursor keys to select a menu and press ENTER.
3
Use the cursor keys to select an item and press ENTER.
To return to the previous screen during menu operations, press RETURN.
4
Use the cursor keys (e/r) to select a setting and press ENTER.
5
To exit from the menu, press SETUP.
Configuring various functions (Setup menu)
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Bluetooth
Language
Configuration
Distance
Level
Equalizer
Test Tone
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Bluetooth
Language
Configuration
Distance
Level
Equalizer
Test Tone
00_RX-V479_V579_om_U.book Page 76 Wednesday, March 25, 2015 9:59 AM
En 77
Setup
menu items
Menu Item Function Page
Speaker
Configuration
Power Amp Assign
(RX-V579 only)
Selects a speaker system.
80
Subwoofer Selects whether or not a subwoofer is connected. 80
Front Selects the size of the front speakers. 80
Center Selects whether or not a center speaker is connected and its size. 80
Surround Selects whether or not surround speakers are connected and their size. 81
Surround Back
(RX-V579 only)
Selects whether or not surround back speakers are connected and their size.
81
Crossover Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 81
Subwoofer Phase Sets the phase of the subwoofer. 81
Extra Bass Enables/disables Extra Bass. 81
Virtual CINEMA FRONT Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration. 82
Distance Sets the distance between each speaker and listening position. 82
Level Adjusts the volume of each speaker. 82
Equalizer Adjusts the tone with an equalizer. 82
Test Tone Enables/disables the test tone output. 83
HDMI Configuration
HDMI Control Enables/disables HDMI Control. 84
Audio Output Selects a device to output audio. 84
Standby Through Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 84
TV Audio Input Selects an audio input jack of the unit to be used for TV audio input. 84
Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit. 85
ARC Enables/disables ARC. 85
SCENE Enables/disables SCENE link playback. 85
00_RX-V479_V579_om_U.book Page 77 Wednesday, March 25, 2015 9:59 AM
En 78
Sound
DSP Parameter
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 86
Panorama Enables/disables the broadening effect of the front sound field. 86
Center Width Adjusts the broadening effect of the center sound field. 86
Dimension Adjusts the difference in level between the front and surround sound fields. 86
Center Image Adjusts the center orientation level (broadening effect) of the front sound field. 86
Lipsync
Select Selects the method to adjust the delay between video and audio output. 87
Adjustment Adjusts the delay between video and audio output manually. 87
Volume
Scale Switches the scale of the volume display. 87
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 87
Max Volume Sets the maximum volume to prevent excessive loudness. 87
Initial Volume Sets the initial volume for when this receiver is turned on. 87
ZoneB Volume
(RX-V579 only)
Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A.
88
ECO
Auto Power Standby Set the amount of time for the auto-standby function. 89
ECO Mode Enables/disables the eco mode (power saving mode). 89
Function
Input Rename Changes the input source name displayed on the front display. 90
Input Skip Set which input source is skipped when operating the INPUT key. 90
Dimmer Adjusts the brightness of the front display. 90
Memory Guard Prevents accidental changes to the settings. 90
Remote Color Key Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control. 91
Network
Information Displays the network information on the unit. 92
Network Connection Selects the network connection method. 92
IP Address Configures the network parameters (such as IP address). 92
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 93
DMC Control Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback. 93
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 93
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 93
Network Update Updates the firmware via the network. 94
Menu Item Function Page
00_RX-V479_V579_om_U.book Page 78 Wednesday, March 25, 2015 9:59 AM
En 79
Bluetooth
Bluetooth Enables/disables the BLUETOOTH functions. 94
Audio Receive Disconnect Terminates the BLUETOOTH connection between the BLUETOOTH device (such as smartphones) and the unit. 53
Bluetooth Standby Selects whether to enable/disable the function that turns on the unit from BLUETOOTH devices (BLUETOOTH standby). 94
Language Select an on-screen menu language. 95
Menu Item Function Page
00_RX-V479_V579_om_U.book Page 79 Wednesday, March 25, 2015 9:59 AM
En 80
Speaker
Configures the speaker settings manually.
Default settings are underlined.
Configuration
Configures the output characteristics of the speakers.
When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm
(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
(RX-V579 only)
Selects a speaker system.
In addition to the 5.1- or 7.1-channel speaker system, various speaker
configurations are possible using the Zone B speakers or bi-amp connection.
Settings
Selects whether or not a subwoofer is connected.
Settings
Selects the size of the front speakers.
Settings
“Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
Selects whether or not a center speaker is connected and its size.
Settings
Power Amp Assign
Basic
Select this option when you use a normal speaker system (not using
Zone B speakers or a bi-amp connection).
BI-AMP
Select this option when you connect front speakers that support
bi-amp connections (p.17).
Zone B
Select this option when you use Zone B speakers (p.68) in addition to
the speaker system in the main zone (Zone A).
Subwoofer
Use
Select this option when a subwoofer is connected.
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
None
Select this option when no subwoofer is connected.
The front speakers will produce LFE (low-frequency effect) channel
audio and low-frequency components from other channels.
Front
Small
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Crossover”).
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
Center
Small
Select this option for small speakers.
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
00_RX-V479_V579_om_U.book Page 80 Wednesday, March 25, 2015 9:59 AM
En 81
Selects whether or not surround speakers are connected and their sizes.
Settings
(RX-V579 only)
Selects whether or not surround back speakers are connected and their sizes.
Settings
“Surround Back” is automatically set to “None” when “Power Amp Assign” is set to “BI-AMP” or “Zone
B”, or when “Surround” is set to “None”.
“Surround Back” is not available when “Virtual CINEMA FRONT” is set to “On”.
Sets the lower limit of the low-frequency components that can be output from a
speaker whose size is set to “Small”. A frequency sound lower than the specified
value will be produced from the subwoofer or front speakers.
Settings
40 Hz, 60 Hz, 80 Hz
, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
Sets the phase of the subwoofer. When the bass sound is lacking or unclear,
switch the subwoofer phase.
Settings
Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy
enhanced bass sounds, regardless of the size of the front speakers and the
presence or absence of the subwoofer.
Settings
You can also use BASS on the remote control to enable/disable Extra Bass (p.48).
Surround
Small
Select this option for small speakers.
The subwoofer or front speakers will produce surround channel
low-frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
None
Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
Surround Back
Small x1
Select this option when one small speaker is connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Crossover”).
Small x2
Select this option when two small speakers are connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Crossover”).
Large x1
Select this option when one large speaker is connected.
The surround back speaker will produce all of the surround back
channel frequency components.
Large x2
Select this option when two large speakers are connected.
The surround back speakers will produce all of the surround back
channel frequency components.
None
Select this option when no surround back speakers are connected.
The surround speakers and subwoofer (or front speakers) will
produce surround back channel audio.
Crossover
Subwoofer Phase
Normal Does not reverse the subwoofer phase.
Reverse Reverses the subwoofer phase.
Extra Bass
Off Disables Extra Bass.
On Enables Extra Bass.
00_RX-V479_V579_om_U.book Page 81 Wednesday, March 25, 2015 9:59 AM
En 82
Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT)
configuration.
Settings
Select “On” only when utilizing the Virtual CINEMA FRONT configuration (p.13).
This setting is not available when “Surround” is set to “None”.
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L (RX-V579 only),
Surround Back R (RX-V579 only), Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
Default
Front L, Front R, Subwoofer: 3.00 m (10.0 ft)
Center: 2.60 m (8.6 ft)
Others: 2.40 m (8.0 ft)
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L (RX-V579 only),
Surround Back R (RX-V579 only), Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
Front L, Front R, Subwoofer: 0.0 dB
Others: -1.0 dB
Equalizer
Adjusts the tone with an equalizer.
Selects the type of equalizer to be used.
Settings
“PEQ” is available only when the YPAO has been performed (p.28).
Manual equalizer adjustment
1
Set “EQ Select” to “GEQ”.
2
Use the cursor keys (q/w) to select “Channel” and the cursor keys (e/r) to
select the desired speaker channel.
3
Use the cursor keys (q/w) to select the desired band (frequency) and the
cursor keys (e/r) to adjust the gain.
Setting range
-6.0 dB to +6.0 dB
4
To exit from the menu, press SETUP.
Virtual CINEMA FRONT
Off Disables the front 5-channel speaker configuration.
On Enables the front 5-channel speaker configuration.
EQ Select
PEQ
Applies the parametric equalizer values obtained by the YPAO
measurement (p.28).
GEQ
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
Off Does not use the equalizer.
Equalizer
Channel
63Hz
160Hz
400Hz
1kHz
2.5kHz
6.3kHz
16kHz
GEQ
Front L
Back:RETURN
EQ Select
GEQ Edit
00_RX-V479_V579_om_U.book Page 82 Wednesday, March 25, 2015 9:59 AM
En 83
Test Tone
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
Off
Does not output test tones.
On
Outputs test tones automatically when you adjust the speaker balance
or equalizer.
00_RX-V479_V579_om_U.book Page 83 Wednesday, March 25, 2015 9:59 AM
En 84
HDMI
Configures the HDMI settings.
Default settings are underlined.
Configuration
Enables/disables HDMI Control (p.114).
Settings
To use HDMI control, you need to perform the HDMI Control link setup (p.114) after connecting HDMI
Control-compatible devices.
Selects a device to output audio.
This setting is available only when “HDMI Control” is set to “Off”.
Amp
Enables/disables the audio output from the speakers connected to the unit.
Settings
HDMI OUT (TV)
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Select whether to output videos/audio (input through HDMI jacks) to the TV when
the unit is in standby mode. If this function is set to “On” or “Auto”, you can use the
input selection keys (HDMI 1–6) to select an HDMI input even when the unit is in
standby mode (the standby indicator on the unit blinks).
Settings
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.
Settings
(RX-V579) AV 1–6
(RX-V479) AUDIO 1–2, AV 1–4
Default
(RX-V579) AV4
(RX-V479) AV2
When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for
connecting an external device because the input will be used for TV audio input.
HDMI Control
Off Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”,
and “SCENE”.
Audio Output
Off Disables the audio output from the speakers.
On
Enables the audio output from the speakers.
Off
Disables the audio output from the TV.
On Enables the audio output from the TV.
Standby Through
Off
(When “HDMI Control” is set to “Off”)
Does not output videos/audio to the TV.
Auto
Automatically selects whether to output videos/audio depending on
the status of the connected device.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
TV Audio Input
00_RX-V479_V579_om_U.book Page 84 Wednesday, March 25, 2015 9:59 AM
En 85
Select whether to use HDMI control to link the standby behavior of the TV and the
unit when “HDMI Control” is set to “On”.
Settings
Enables/disables ARC (p.19) when “HDMI Control” is set to “On”.
Settings
You do not need to change this setting normally. In case noises are produced from the speakers
connected to the unit because TV audio signals input to the unit via ARC are not supported by the
unit, set “ARC” to “Off” and use the TV’s speakers.
Enables/disable SCENE link playback when “HDMI Control” is set to “On”.
When SCENE link playback is enabled, HDMI Control-compatible devices
connected to the unit via HDMI automatically works as follows, with a scene
selection.
TV: turning on and displaying video from the playback device
Playback device: starting playback
Choices (SCENE keys)
BD/DVD, TV, NET, RADIO
Settings
Default
BD/DVD, TV: On
NET, RADIO: Off
SCENE link playback may not work properly due to the compatibility between devices. We
recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
Standby Sync
Off Does not set the unit to standby mode when the TV is turned off.
On Sets the unit to standby mode when the TV is turned off.
Auto
Sets the unit to standby mode when the TV is turned off only when the
unit is receiving TV audio or HDMI signals.
ARC
Off Disables ARC.
On
Enables ARC.
SCENE
Off Disables SCENE link playback for the selected SCENE key.
On Enables SCENE link playback for the selected SCENE key.
00_RX-V479_V579_om_U.book Page 85 Wednesday, March 25, 2015 9:59 AM
En 86
Sound
Configures the audio output settings.
Default settings are underlined.
DSP Parameter
Configures the surround decoder settings.
Enables/disables CINEMA DSP 3D (p.45). If this function is set to “On”, CINEMA
DSP 3D functions with the selected sound programs (except 2ch Stereo and
7ch/5ch Stereo).
Settings
Enables/disables the broadening effect of the front sound field. When this function
is enabled, you can wrap front left/right channel sounds around the field and
generate a spacious sound field in combination with the surround sound field. This
setting is effective when “bPLII Music” or “bPLIIx Music” (RX-V579 only) is
selected.
Settings
Adjusts the broadening effect of the center sound field. Higher to enhance the
broadening effect, and lower to reduce it (closer to center). This setting is effective
when “bPLII Music” or “bPLIIx Music” (RX-V579 only) is selected.
Setting range
0 to 3
to 7
Adjusts the difference in level between the front and surround sound fields. Higher
to strengthen the front sound field and lower to strengthen the surround sound
field. This setting is effective when “bPLII Music” or “bPLIIx Music” (RX-V579
only) is selected.
Setting range
-3 to 0
to +3
Adjusts the center orientation level (broadening effect) of the front sound field.
Higher to strengthen the center orientation level (less broadening effect) and lower
to weaken (more broadening effect). This setting is effective when “Neo:6 Music” is
selected.
Setting range
0.0 to 0.3
to 1.0
CINEMA DSP 3D Mode
Off Disables CINEMA DSP 3D.
On
Enables CINEMA DSP 3D.
Panorama
Off Disables the broadening effect of the front sound field.
On Enables the broadening effect of the front sound field.
Center Width
Dimension
Center Image
00_RX-V479_V579_om_U.book Page 86 Wednesday, March 25, 2015 9:59 AM
En 87
Lipsync
Adjusts the delay between video and audio output.
You can enable/disable the Lipsync function by input sources in “Lipsync” (p.74) in the “Option” menu.
Selects the method to adjust the delay between video and audio output.
Setting range
“Select” is automatically set to “Manual” depending on the TV connected to the unit.
Adjusts the delay between video and audio output manually when “Select” is set to
“Manual”. You can fine-adjust the audio output timing when “Select” is set to
“Auto”.
Setting range
0 ms
to 500 ms (1 ms increments)
Volume
Configures the volume settings.
Switches the scale of the volume display.
Settings
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital
and DTS signals) playback.
Settings
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
[50.0 to 95.0 (5.0 increments), 97.0]
Sets the initial volume when the receiver is turned on.
Settings
Select
Manual
Select this option when you want to adjust the delay between video
and audio output manually.
Adjust the audio output timing in “Adjustment”.
Auto
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in
“Adjustment”.
Adjustment
Scale
dB Displays the volume in the “dB” unit.
0-97 Displays the volume in the numeric value (0.5 to 97.0).
Dynamic Range
Maximum Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Min/Auto
Sets the dynamic range for clear sound even at night or at low
volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
Max Volume
Initial Volume
Off
Sets the level to the volume level of the unit when it last entered
standby mode.
Mute Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
(0.5 dB increments)
[0.5 to 97.0
(0.5 increments)]
Sets the level to the specified volume level.
00_RX-V479_V579_om_U.book Page 87 Wednesday, March 25, 2015 9:59 AM
En 88
(RX-V579 only)
Selects whether to adjust the volume for Zone B in conjunction with the volume for
Zone A.
Settings
If “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB. As
necessary, adjust the volume using the remote control (p.69).
ZoneB Volume
Sync.
Adjusts the volume for Zone B in conjunction with the volume for
Zone A.
Async.
Does not adjust the volume for Zone B in conjunction with the volume
for Zone A. Adjust the volume for Zone B separately (p.69).
00_RX-V479_V579_om_U.book Page 88 Wednesday, March 25, 2015 9:59 AM
En 89
ECO
Configures the power supply settings.
Default settings are underlined.
Auto Power Standby
Set the amount of time for the auto-standby function.
Settings
Default
U.K. and Europe models: 20 minutes
Other models: Off
Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in
the front display.
ECO Mode
Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit’s power consumption.
Settings
Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect after the
unit is restarted.
When “ECO Mode” is set to “On”, the front panel display may become dark.
If you want to play audio at high volume, set “ECO Mode” to “Off”.
Off Does not set the unit to standby mode automatically.
20 minutes
Sets the unit to standby mode when you have not operated the unit
and the unit has not detected any input signal for the specified time.
2 hours, 4 hours,
8 hours, 12 hours
Sets the unit to standby mode when you have not operated the unit for
the specified time.
Off
Disables the eco mode.
On Enables the eco mode.
00_RX-V479_V579_om_U.book Page 89 Wednesday, March 25, 2015 9:59 AM
En 90
Function
Configures the functions that make the unit easier to use.
Default settings are underlined.
Input Rename
Changes the input source name displayed on the front display. You can also select a
name from the presets or a name created by the Auto Rename function.
Input sources
(RX-V579) HDMI 1–6, AV 1–6, USB, Bluetooth, AUX
(RX-V479) HDMI 1–6, AUDIO 1–2, AV 1–4, USB, Bluetooth, AUX
Default
HDMI 1–6: Auto
Others: Manual (For USB, Bluetooth, AUX only “Manual” can be selected.)
Procedure
1
Use the cursor keys (q/w) to select an input source to be renamed.
2
Use the cursor keys (e/r) to select “Manual” and press ENTER.
To select a name from the presets, after selecting “
Manual
”, use the cursor keys (
e
/
r
) to select a preset name.
When selecting “Auto”, the unit creates a name automatically according to the connected device.
You can check a created name by pressing ENTER.
During selecting “Auto”, the created name is saved even after the device connection is terminated. To
reset to the default setting, switch the setting to “Manual” at once and then set it again to “Auto”.
3
Press ENTER.
The edit screen is displayed.
4
Use the cursor keys and ENTER key to edit the name, and then select “OK” to
confirm the new name.
5
To change another input source name, repeat steps 1 to 4.
6
To exit from the menu, press SETUP.
Input Skip
Set which input source is skipped when operating the INPUT key.
You can select the desired input source quickly by skipping unnecessary input sources.
Input sources
(RX-V579) HDMI 1–6, AV 1–6, TUNER, USB, NET, Bluetooth, AUX
(RX-V479) HDMI 1–6, AUDIO 1–2, AV 1–4, TUNER, USB, NET, Bluetooth, AUX
Settings
Dimmer
Adjusts the brightness of the front display.
Setting range
-4 to 0
(higher to brighten)
The front display may become dark when “ECO Mode” (p.89) is set to “On”.
Memory Guard
Prevents accidental changes to the settings.
Settings
When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.
HDMI
( ) [ ] { } < > * ! ? # % &
. , : ; _ | / \ $ ~^´ ’ `
0 1 2 3 4 5 6 7 8 9 + - =
Aa BKSP Space DEL
a b c d e f g h i j k l m
n o p q r s t u v w x y z
Input Rename
OK
CANCEL
CLEAR
Off Does not skip the selected input source.
On Skips the selected input source.
Off
Does not protect the settings.
On Protects the settings until “Off” is selected.
o
Memory Guard
Memory Guard On
Back:RETURN
Icon
07_config.fm Page 90 Thursday, March 26, 2015 7:13 PM
En 91
Remote Color Key
Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control.
Settings
Default
Assigns the functions of playback devices connected to the unit with
an HDMI cable.
Input
Assigns the unit's input sources to each key. The assigned input
sources can be set separately.
Input sources
(RX-V579) HDMI 1–6, AV 1–6, TUNER, USB, NET, Bluetooth, AUX
(RX-V479) HDMI 1–6, AUDIO 1–2, AV 1–4, TUNER, USB, NET,
Bluetooth, AUX
Default
RED: HDMI 2, GREEN: HDMI 6, YELLOW: AV 2, BLUE: AUX
Program
Assigns the functions of sound mode to each key.
RED: MOVIE
GREEN: MUSIC
YELLOW: STEREO
BLUE: SUR.DECODE
For example, if you press the RED key repeatedly, you can select your
favorite sound program from the sound programs (MOVIE) (p.45)
suitable for the video source.
00_RX-V479_V579_om_U.book Page 91 Wednesday, March 25, 2015 9:59 AM
En 92
Network
Configures the network settings.
Default settings are underlined.
Information
Displays the network information on the unit.
Network Connection
Selects the network connection method.
Choices
IP Address
Configures the network parameters (such as IP address).
Select whether to use a DHCP server.
Settings
Manual network settings
1
Set “DHCP” to “Off”.
2
Use the cursor keys (q/w) to select a parameter type.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
4
To exit from the menu, press SETUP.
Status The connection status of the NETWORK jack
Connection Connection method
SSID The access point to which the unit is connected
Security The encryption method for your network
MAC Address (Ethernet)
MAC address
MAC Address (Wi-Fi)
IP Address IP address
Subnet Mask Subnet mask
Default Gateway The IP address of the default gateway
DNS Server (P) The IP address of the primary DNS server
DNS Server (S) The IP address of the secondary DNS server
vTuner ID The ID of the Internet radio (vTuner)
Wired
Select this option when you want to connect the unit to a network
with a commercially-available network cable.
Wireless (Wi-Fi)
Select this option when you want to connect the unit to a network
via the wireless router (access point). For details on settings, see
“Connecting the unit to a wireless network” (p.33).
Wireless Direct
Select this option when you want to connect a mobile device to
the unit directly. For details on settings, see “Connecting a mobile
device to the unit directly (Wireless Direct)” (p.40).
DHCP
Off
Does not use a DHCP server. Configure the network parameters
manually. For details, see “Manual network settings”.
On
Uses a DHCP server to automatically obtain the unit’s network
parameters (such as IP address).
IP Address Specifies an IP address.
Subnet Mask Specifies a subnet mask.
Default Gateway Specifies the IP address of the default gateway.
DNS Server (P) Specifies the IP address of the primary DNS server.
DNS Server (S) Specifies the IP address of the secondary DNS server.
00_RX-V479_V579_om_U.book Page 92 Wednesday, March 25, 2015 9:59 AM
En 93
MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
Operation of the AirPlay function (p.57) or the DMC is not limited by this setting.
Enables/disables the MAC address filter.
Settings
Specifies the MAC addresses (up to 10) of the network devices that will be
permitted access to the unit when “Filter” is set to “On”.
Procedure
1
Use the cursor keys (q/w) to select an MAC address number (1 to 10).
2
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
3
To exit from the menu, press SETUP.
DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Settings
A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media
Player 12) on the same network.
Network Standby
Selects whether the unit can be turned on from other network devices (network
standby).
Settings
Network Name
Edits the network name (the unit’s name on the network) displayed on other network
devices.
Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER key to edit the name, and then select “OK” to
confirm the new name.
3
To exit from the menu, press SETUP.
Filter
Off Disables the MAC address filter.
On
Enables the MAC address filter. In “MAC Address 1–10”, specify the
MAC addresses of the network devices that will be permitted access
to the unit.
MAC Address 1–10
Disable Does not allow DMCs to control playback.
Enable
Allows DMCs to control playback.
Off Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
Auto
Enables the network standby function.
(If “Network Connection” is set to “Wired”, the unit is set to the power
saving mode when the network cable is disconnected.)
Y a m a h a x x x x x x _
( ) [ ] { } < > * ! ? # % &
. , : ; _ | / \ $ ~^´ ’ `
0 1 2 3 4 5 6 7 8 9 + - =
Aa BKSP Space DEL
a b c d e f g h i j k l m
n o p q r s t u v w x y z
Network Name
OK
CANCEL
CLEAR
00_RX-V479_V579_om_U.book Page 93 Wednesday, March 25, 2015 9:59 AM
En 94
Network Update
Updates the firmware via the network.
Starts the process to update the unit’s firmware. For details, see “Updating the
unit’s firmware via the network” (p.99).
Displays the version of the firmware installed on the unit.
Displays the system ID number.
Bluetooth
Configures the BLUETOOTH settings.
Bluetooth
Enables/disables the BLUETOOTH function (p.53).
Settings
Bluetooth Standby
Selects whether to enable/disable the function that turns on the unit from BLUETOOTH
devices (BLUETOOTH standby). If this function is set to “On”, the unit automatically
turns on when a connect operation is performed on the BLUETOOTH device.
Settings
This setting is not available when “Network Standby” (p.93) is set to “Off”.
Perform Update
Firmware Version
System ID
Off Disables the BLUETOOTH function.
On
Enables the BLUETOOTH function.
Off Disables the BLUETOOTH standby function.
On
Enables the BLUETOOTH standby function.
(The unit consumes more power than when “Off” is selected.)
00_RX-V479_V579_om_U.book Page 94 Wednesday, March 25, 2015 9:59 AM
En 95
Language
Select an on-screen menu language.
Default settings are underlined.
Settings
Japanese and Chinese characters used in content information (such as song titles) cannot be displayed.
The information on the front display is provided in English only.
English English
日本語
Japanese
Français French
Deutsch German
Español Spanish
Русский Russian
Italiano Italian
中文
Chinese
00_RX-V479_V579_om_U.book Page 95 Wednesday, March 25, 2015 9:59 AM
En 96
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z (power).
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on again.
The new settings take effect.
ADVANCED SETUP
menu items
Default settings are underlined.
Changing the speaker impedance setting (
SP IMP.
)
(U.S.A. and Canada models only)
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
Settings
Configuring the system settings (ADVANCED SETUP menu)
z (power)
STRAIGHTPROGRAM
Item Function Page
SP IMP.
(U.S.A. and Canada models only)
Changes the speaker impedance setting.
96
REMOTE ID Selects the unit’s remote control ID. 97
TU
(Asia, Taiwan and General models only)
Changes the FM/AM tuning frequency setting.
97
TV FORMAT Switches the video signal type of HDMI output. 97
INIT Restores the default settings. 97
UPDATE Updates the firmware. 98
VERSION Checks the version of firmware currently installed on the unit. 98
6 Ω MIN Select this option when you connect 6-ohm speakers to the unit.
8
Ω MIN
Select this option when you connect 8-ohm or higher speakers to the
unit.
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
SP IMP.••8¬MIN
00_RX-V479_V579_om_U.book Page 96 Wednesday, March 25, 2015 9:59 AM
En 97
Selecting the remote control ID (
REMOTE ID
)
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1
, ID2
Changing the remote control ID of the remote control
1
To select ID1, while holding down the cursor key (e), hold down SCENE (BD/DVD)
for more than 3 seconds.
To select ID2, while holding down the cursor key (e), hold down SCENE (TV) for
more than 3 seconds.
Changing the FM/AM tuning frequency setting (
TU
)
(Asia, Taiwan and General models only)
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
Switching the video signal type (
TV FORMAT
)
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea, Taiwan and General models: NTSC
Other models: PAL
Restoring the default settings (
INIT
)
Restores the default settings for the unit.
Choices
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz
steps and AM by 10-kHz steps.
FM50/AM9
Select this when you want to adjust the FM frequency by 50-kHz steps
and AM by 9-kHz steps.
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
REMOTE ID••ID1
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
TU••••FM50/AM9
ALL Restores the default settings for the unit.
CANCEL
Does not perform an initialization.
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
TV FORMAT•NTSC
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
INIT••••CANCEL
00_RX-V479_V579_om_U.book Page 97 Wednesday, March 25, 2015 9:59 AM
En 98
Updating the firmware (
UPDATE
)
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website. If the unit is
connected to the Internet, you can download the firmware via the network. For details,
refer to the information supplied with updates.
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to
start firmware update.
Choices
Checking the firmware version (
VERSION
)
Check the version of firmware currently installed on the unit.
You can also check the firmware version in “Network Update” (p.94) in the “Setup” menu.
It may take a while until the firmware version is displayed.
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
UPDATE•••••USB
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
VERSION••xx.xx
00_RX-V479_V579_om_U.book Page 98 Wednesday, March 25, 2015 9:59 AM
En 99
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
You can also update the firmware using the USB memory device from the
“ADVANCED SETUP” menu (p.98).
A firmware update is available if the following message is displayed
after SETUP is pressed.
1
Read the on-screen description and press ENTER.
2
To start the firmware update, press ENTER.
The on-screen display turns off.
3
If “UPDATE SUCCESS PLEASE POWER OFF!”
appears on the front display, press z (power) on the
front panel.
The firmware update is complete.
Updating the unit’s firmware via the network
Note
Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
If the Internet connection speed is slow, or the unit is connected to the
wireless network, network update may not be possible depending on the
condition of the wireless connection. In this case, update the firmware using
the USB memory device (p.98).
To perform the following procedure, your TV must be connected to the unit via
HDMI. If not, perform the update from the “ADVANCED SETUP” menu (p.98).
For details on update, visit the Yamaha website.
Network Update
New firmware available.
You can switch the language.
(You can also start the update
from the “Setup-Network”
screen.)
CANCEL : RETURN
Press ENTER to update now.
Language English
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BAS S
INPUT
BD
DVD
TV
SCENE
RADIO
SLEEP
ENTER
BLUE
YELLOWGREEN
RED
DIRECT
ZONE A ZONE B
NET
NET
BLUETOOTH
T
U
NIN
G
PRE
S
ET
M
U
T
E
T
U
NIN
G
MEM
O
R
Y
T
O
P
MENU
HO
M
E
P
O
P-
U
P
/
MEN
U
DISPLA
Y
A
A
RET
U
R
N
O
OPTION
FM
/
A
M
V
O
L
U
ME
PR
OG
R
AM
USB
ST
RA
IGH
T
E
NHAN
C
E
R
BA
S
S
IN
PU
T
BD
DVD
TV
SC
E
N
E
R
A
DI
O
S
LEEP
BLU
E
YEL
L
OW
LL
G
RE
E
N
R
E
D
DIREC
T
Z
O
NE
AZ
O
NE
B
NET
NE
T
BL
UE
T
O
OT
H
SETUP
Cursor keys
ENTER
Cursor keys
00_RX-V479_V579_om_U.book Page 99 Wednesday, March 25, 2015 9:59 AM
En 100
APPENDIX
If you have changed speakers or have a new speaker system, use YPAO to optimize
the speaker settings again (p.28). If you want to adjust the speaker settings manually,
use “Speaker” in the “Setup” menu (p.80).
If a small child accidentally operates the controls on the main unit or remote control, the
volume may suddenly increase. This may also cause injury or damage the unit or
speakers. We recommend using “Max Volume” in the “Setup” menu to set the
maximum volume level for the unit in advance (p.87).
By default, the volume level when the unit last entered standby mode is automatically
applied. If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the
volume to be applied when the receiver is turned on (p.87).
You can correct volume differences between input sources by utilizing “Input Trim” in
the “Option” menu (p.74).
To use HDMI Control, you need to perform the HDMI Control link setup (p.114). After
connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time you add a new HDMI Control-compatible device to your
system. For information on how HDMI Control works between your TV and playback
devices, refer to the instruction manuals for each device.
By default, input source names (such as “HDMI 1” and “AV 1”) are displayed on the
front display when an input source is selected. If you want to rename them as you like,
use “Input Rename” (p.90) in the “Setup” menu. You can also select a name from the
presets (such as “Blu-ray” and “DVD”).
You can protect the settings configured on the unit (such as speaker settings) by
utilizing “Memory Guard” in the “Setup” menu (p.90).
When using multiple Yamaha products, the remote control may work on another
Yamaha product or another remote control may work on the unit. If this happens,
register different remote control IDs for the devices that you want to control with each
remote control (p.97).
If you have connected a video device to the unit with HDMI, you can output
videos/audio played back on the video device to the TV even when the unit is in
standby mode. To use this function, set “Standby Through” (p.84) in the “Setup” menu
to “On” or “Auto”. You can also switch the input source using the remote control of the
unit when this function is enabled.
Frequently asked questions
The new speaker system does not provide an ideal sound
balance...
We want to set limitations on the volume control...
I want to fix the volume when turning on the unit...
The volume varies depending on the input sources...
HDMI Control does not work at all...
I want to change the input source name...
I want to prevent accidental changes to the settings...
The unit’s remote control is simultaneously controlling
another Yamaha product as well as the unit...
I want to enjoy videos/audio played back on the video device
even when the unit is in standby mode
00_RX-V479_V579_om_U.book Page 100 Wednesday, March 25, 2015 9:59 AM
En 101
Use “
Audio In
” in the “
Option
” menu to change the combination of video/audio input
jacks so that it matches the output jack(s) of your external device (p.22).
Use “Lipsync” in the “Setup” menu to adjust the delay between video and audio output
(p.87).
Use “Audio Output” in the “Setup” menu to select the output destination of signals input
into the unit (p.84). Your TV speakers may be selected as an output destination.
Use “Language” in the “Setup” menu to select a language from English, Japanese,
French, German, Spanish, Russian, Italian and Chinese (p.27).
Use “UPDATE” in the “ADVANCED SETUP” menu to update the unit’s firmware (p.98).
Various functions to customize the unit are available.
SCENE settings (p.43)
Sound/video settings and signal information for each source (p.72)
Various function settings (p.77)
System settings (p.96)
The combination of video/audio input jacks does not match
an external device...
Video and audio are not synchronized...
I want to hear audio from the TV speakers...
I want to change the on-screen menu language...
I want to update the firmware...
I want to customize the unit...
00_RX-V479_V579_om_U.book Page 101 Wednesday, March 25, 2015 9:59 AM
En 102
Refer to the table below when the unit does not function properly.
If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
First, check the following:
a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets
securely.
b The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on.
c The connectors of each cable are securely inserted in to jacks on each device.
Power, system and remote control
Troubleshooting
Problem Cause Remedy
The power does not turn on.
The protection circuitry has been activated three times
consecutively. If the unit is in this condition, the standby indicator
on the unit blinks when you try to turn on the power.
As a safety precaution, capability to turn on the power is disabled. Contact your
nearest Yamaha dealer or service center to request repair.
The power does not turn off.
The internal microcomputer has frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down z (power) on the front panel for more than 15 seconds to initialize
and reboot the unit. (If the problem persists, disconnect the power cable from the
AC wall outlet and plug it again.)
The power turns off (standby mode) immediately. The unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.17).
The unit enters standby mode automatically.
The sleep timer worked. Turn on the unit and start playback again.
The auto-standby function kicked in because the unit was not used
for the specified time.
To disable the auto-standby function, set “Auto Power Standby” in the “Setup
menu to “Off” (p.89).
The speaker impedance setting is incorrect. Set the speaker impedance to match your speakers (p.96).
The protection circuitry has been activated because of a short
circuit.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.17).
The unit is not reacting.
The internal microcomputer is frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down z (power) on the front panel for more than 15 seconds to initialize
and reboot the unit. (If the problem persists, disconnect the power cable from the
AC wall outlet and plug it again.)
00_RX-V479_V579_om_U.book Page 102 Wednesday, March 25, 2015 9:59 AM
En 103
The unit cannot be controlled using the remote
control.
The unit is out of the operating range. Use the remote control within the operating range (p.4).
The batteries are weak. Replace with new batteries.
The unit’s remote control sensor is exposed to direct sunlight or
strong lighting.
Adjust the lighting angle, or reposition the unit.
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.97).
The remote control is set to the Zone B operation mode. Set the remote control to the Zone A operation mode (p.69).
Cannot select the desired input source even if
“INPUT” is pressed.
The function which skips some input sources is set. Set “Input Skip” of the desired input source in the “Setup” menu to “Off” (p.90).
The RED/GREEN/YELLOW/BLUE keys of the
remote control do not operate.
The device which is connected to the unit via HDMI does not
support the operation of the RED/GREEN/YELLOW/BLUE keys.
Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE
keys.
The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's
remote control have been changed.
Set the “Remote Color Key” settings in the “Setup” menu to “Default” (p.91).
Problem Cause Remedy
00_RX-V479_V579_om_U.book Page 103 Wednesday, March 25, 2015 9:59 AM
En 104
Audio
Problem Cause Remedy
No sound.
Another input source is selected. Select an appropriate input source with the input selection keys.
Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. To check the audio
format of the input signal, use “Signal Info” in the “Option” menu (p.74).
(RX-V579 only)
Audio output to Zone A (or Zone B) is disabled.
Press ZONE A (ZONE B) to enable audio output to Zone A (or Zone B).
The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
The volume cannot be increased.
The maximum volume is set. Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.87).
A device connected to the output jacks of the unit is not turned on.
(This may happen due to the nature of AV receivers.)
Turn on all devices connected to the output jacks of the unit.
No sound is coming from a specific speaker.
The playback source does not contain a signal for the channel. To check it, use “Signal Info” in the “Option” menu (p.74).
The currently selected sound program/decoder does not use the
speaker.
To check it, use “Test Tone” in the “Setup” menu (p.83).
Audio output of the speaker is disabled.
Perform YPAO (p.28) or use “Configuration” in the “Setup” menu to change the
speaker settings (p.80).
The volume of the speaker is set too low.
Perform YPAO (p.28) or use “Level” in the “Setup” menu to adjust the speaker
volume (p.82).
(RX-V579 only)
Audio output to Zone A (or Zone B) is disabled.
Press ZONE A (ZONE B) to enable audio output to Zone A (or Zone B).
The speaker cable connecting the unit and the speaker is
defective.
If there is no problem with the connection, replace with another speaker cable.
The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists, the unit may be
malfunctioning.
(RX-V579 only)
No sound is coming from the surround back
speaker.
The extended surround is disabled.
Use “Extended Surround” in the “Option” menu to select a decoder to be used
(p.73).
“Power Amp Assign” is set to “BI-AMP” or “Zone B”.
When “Power Amp Assign” in the “Setup” menu is set to “BI-AMP” or “Zone B”,
you cannot use the surround back speakers. To use the surround back speakers,
set “Power Amp Assign” to “Basic” (p.80).
No sound is coming from the subwoofer.
The playback source does not contain Low Frequency Effect (LFE)
or low-frequency signals.
To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the
front channel low-frequency components from the subwoofer (p.81).
Subwoofer output is disabled. Perform YPAO (p.28) or set “Subwoofer” in the “Setup” menu to “Use” (p.80).
The volume of the subwoofer is too low. Adjust the volume on the subwoofer.
The subwoofer has been turned off by its auto-standby function. Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
00_RX-V479_V579_om_U.book Page 104 Wednesday, March 25, 2015 9:59 AM
En 105
Video
No sound from the playback device (connected to
the unit with HDMI).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The unit is set not to output audio input through HDMI jacks from
the SPEAKERS terminals.
In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.84).
The number of devices connected to the HDMI OUT jack exceeds
the limit.
Disconnect some of the HDMI devices.
No sound from the TV (when HDMI Control is
used).
The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
A TV that does not support ARC is connected to the unit only with
an HDMI cable.
Use a digital optical cable to make an audio connection (p.19).
(If the TV is connected to the unit with an audio cable)
The TV audio input setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
(p.84).
(If you are trying to use ARC)
ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On” (p.85). Also, enable ARC on the TV.
Only the front speakers work on multichannel
audio.
The playback device is set to output 2-channel audio (such as
PCM) only.
To check it, use “Signal Info” in the “Option” menu (p.74). If necessary, change
the digital audio output setting on the playback device.
Noise/hum is heard.
The unit is too close to another digital or radio frequency device. Move the unit further away from the device.
The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
The sound is distorted.
The volume of the unit is too high.
Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to
“Off” (p.89).
A device connected to the unit’s output jacks is not turned on. Turn on all devices connected to the unit’s output jacks.
Problem Cause Remedy
No video.
Another input source is selected on the unit. Select an appropriate input source with the input selection keys.
Another input source is selected on the TV. Switch the TV input to display the video from the unit.
The video signal output from the unit is not supported by the TV.
Check the video output setting of the playback device. For information about
video signals supported by the TV, refer to the instruction manuals for the TV.
The cable connecting the unit and TV (or playback device) is
defective.
If there is no problem with the connection, replace with another cable.
No video from the playback device (connected to
the unit with HDMI).
The input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution), use “Signal
Info” in the “Option” menu (p.74). For information about video signals supported
by the unit, see “HDMI signal compatibility” (p.116).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The number of devices connected to the HDMI OUT jack is over
the limit.
Disconnect some of the HDMI devices.
Problem Cause Remedy
00_RX-V479_V579_om_U.book Page 105 Wednesday, March 25, 2015 9:59 AM
En 106
FM/AM radio
No image (contents required the HDCP 2.2
-compatible HDMI device) from the playback
device connected to the unit with HDMI.
The TV (HDMI input jack) does not support HDCP 2.2, or the
playback device is connected to other than the HDMI 6 jack. (The
Warning message can be displayed on the TV screen.)
Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2. Use the
HDMI 6 jack to connect the playback device.
The menu of the unit is not displayed on the TV.
The TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them (p.19 to 21).
Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack).
Problem Cause Remedy
FM radio reception is weak or noisy.
There is multi-path interference. Adjust the FM antenna height or orientation, or place it in a different location.
Your area is too far from the FM station transmitter.
To select monaural FM radio reception “FM Mode” in the “Option” menu to “Mono”
(p.49).
Use an outdoor FM antenna.
AM radio reception is weak or noisy.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Radio stations cannot be selected automatically.
Your area is too far from the FM station transmitter.
Select the station manually (p.49).
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
The AM radio signal is weak.
Adjust the AM antenna orientation.
Select the station manually (p.49).
Use an outdoor AM antenna.
AM radio stations cannot be registered as
presets.
Auto Preset has been used.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.50).
Problem Cause Remedy
00_RX-V479_V579_om_U.book Page 106 Wednesday, March 25, 2015 9:59 AM
En 107
USB
and network
Problem Cause Remedy
The unit does not detect the USB device.
The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again.
The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format.
Folders and files in the USB device cannot be
viewed.
The data in the USB device is protected by the encryption. Use a USB device without an encryption function.
The network feature does not function.
The network parameters (IP address) have not been obtained
properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup”
menu to “On” on the unit (p.92). If you want to configure the network parameters
manually, check that you are using an IP address which is not used by other
network devices in your network (p.92).
The unit does not detect the PC.
The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared (p.62).
Some security software installed on your PC is blocking the access
of the unit to your PC.
Check the settings of security software installed on your PC.
The unit and PC are not in the same network.
Check the network connections and your router settings, and then connect the
unit and the PC to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your PC to allow it to access to the unit (p.93).
The files in the PC cannot be viewed or played
back.
The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server. For
information about the file formats supported by the unit, see “Playing back music
stored on media servers (PCs/NAS)” (p.62).
The Internet radio cannot be played.
The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may have
been stopped. Try the station later or select another station.
The selected Internet radio station is currently broadcasting
silence.
Some Internet radio stations broadcast silence at certain of times of the day. Try
the station later or select another station.
Access to the network is restricted by the firewall settings of your
network devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station.
The port number varies depending on the radio station.
The application for smartphone/tablet “AV
CONTROLLER” does not detect the unit.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your smartphone/tablet to allow it to access to the
unit (p.93).
The unit and smartphone/tablet are not in the same network.
Check the network connections and your router settings, and then connect the
unit and smartphone/tablet to the same network.
Firmware update via the network is failed. It may not be possible depending on the condition of the network. Update the firmware via the network again or use a USB memory device (p.98).
The mobile device does not recognize the unit
when using AirPlay or AV CONTROLLER.
The unit and the mobile device are connected to different SSID
when using a multiple SSID router.
Connect them to the Primary SSID (at the top of the list).
The unit cannot connect to the Internet via a
wireless router (access point).
The wireless router (access point) is turned off. Turn on the wireless router.
The unit and the wireless router (access point) are too far apart. Place the unit and the wireless router (access point) closer to each other.
There is an obstacle between the unit and the wireless router
(access point).
Move the unit and the wireless router (access point) in a location where there are
no obstacles between them.
00_RX-V479_V579_om_U.book Page 107 Wednesday, March 25, 2015 9:59 AM
En 108
BLUETOOTH
Wireless network is not found.
Microwave ovens or other wireless devices in your neighborhood
might disturb the wireless communication.
Turn off these devices.
Access to the network is restricted by the firewall settings of the
wireless router (access point).
Check the firewall setting of the wireless router (access point).
Problem Cause Remedy
A BLUETOOTH connection cannot be
established.
The BLUETOOTH function of the unit is disabled. Enable the BLUETOOTH function (p.94).
Another BLUETOOTH device is already connected to the unit.
Terminate the current Bluetooth connection and then establish a new connection
(p.53).
The unit and the BLUETOOTH device are too far apart. Move the BLUETOOTH device closer to the unit.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
Move the unit away from those devices.
The BLUETOOTH device does not support A2DP. Use a BLUETOOTH device that supports A2DP.
The connection information registered on the BLUETOOTH device
is not working for some reason.
Delete the connection information on the BLUETOOTH device, and then establish
a connection between the BLUETOOTH device and the unit again (p.53).
No sound is produced, or the sound is
interrupted during playback.
The volume of the BLUETOOTH device is set too low. Turn up the volume of the BLUETOOTH device.
The BLUETOOTH device is not set to send audio signals to the
unit.
Switch the audio output of the BLUETOOTH device to the unit.
The BLUETOOTH connection has been terminated.
Establish a Bluetooth connection between the BLUETOOTH device and the unit
again (p.53).
The unit and the BLUETOOTH device are too far apart. Move the BLUETOOTH device closer to the unit.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
Move the unit away from those devices.
Problem Cause Remedy
00_RX-V479_V579_om_U.book Page 108 Wednesday, March 25, 2015 9:59 AM
En 109
Error indications on the front display
Message Cause Remedy
Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.62).
Access error
The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot access the iPod. Turn off the iPod and turn it on again.
The connected iPod is not supported by the unit. Use an iPod supported by the unit (p.54).
There is a problem with the signal path from the network to the unit.
Make sure your router and modem are turned on.
Check the connection between the unit and your router (or hub) (p.25).
Check SP Wires The speaker cables short circuit. Twist the bare wires of the cables firmly and connect to the unit and speakers properly.
Internal Error An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center.
No content There are no playable files in the selected folder. Select a folder that contains files supported by the unit.
No device
The unit cannot detect the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot detect the iPod. Turn off the iPod and then turn it on again.
Not connected
The network cable is not connected. Connect the network cable properly.
The wireless router (access point) is not found. Make sure the wireless router (access point) is turned on.
Please wait The unit is preparing for connecting to the network.
Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn
it on again.
RemID Mismatch
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.97).
Unable to play
The unit cannot play back the songs stored on the iPod for some
reason.
Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
defective.
The unit cannot play back the songs stored on the PC for some
reason.
Check if the format of files you are trying to play is supported by the unit. For information about the
formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.62). If
the unit supports the file format, but still cannot play back any files, the network may be overloaded with
heavy traffic.
USB Overloaded An overcurrent is flowing through the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
Version error Firmware update is failed. Update the firmware again.
00_RX-V479_V579_om_U.book Page 109 Wednesday, March 25, 2015 9:59 AM
En 110
Audio information
Audio decoding format
Dolby Digital
Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD disc.
Dolby Digital EX
Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby
Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound.
Dolby Digital Plus
Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems
that support Dolby Digital. This technology is used for audio on BD (Blu-ray Disc).
Dolby Pro Logic II
Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources.
Dolby Pro Logic IIx
Dolby Pro Logic IIx enables 7-channel playback from 2-channel or multichannel sources. There are three
modes available: “Music mode” for music sources, “Movie mode” for movie sources and “Game mode” for
game sources (for 2-channel sources only).
Dolby TrueHD
Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a
high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray Disc).
DTS 96/24
DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit audio. This
format remains fully compatible with the existing multichannel audio systems that support DTS Digital
Surround. This technology is used for music DVDs, etc.
DTS Digital Surround
DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
DTS-ES
DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This
decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a
surround back sound is recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a
discrete surround back channel is recorded.
DTS Express
DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher
compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is
developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray Disc).
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports
7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the
existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on
BD (Blu-ray Disc).
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home
theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray Disc).
DTS Neo: 6
DTS Neo: 6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music
mode” for music sources and “Cinema mode” for movie sources. This technology provides discrete
full-bandwidth matrix channels of surround sound.
DSD (Direct Stream Digital)
DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super
Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224 MHz. The highest
frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology
offers better audio quality than that used for CDs.
FLAC
FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio
formats in compression rate but provides higher audio quality.
MP3
One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this
compression method achieves a high compression rate. Reportedly, it is capable of compressing data
quantity by about 1/10 maintaining a certain level of audio quality.
MPEG-4 AAC
An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming
services on Internet because it allows a high compression rate of data while maintaining better audio quality
than MP3.
PCM (Pulse Code Modulation)
PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This
technology is the basis of all other audio format. This technology is used as a lossless audio format called
Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray Disc).
Glossary
00_RX-V479_V579_om_U.book Page 110 Wednesday, March 25, 2015 9:59 AM
En 111
Sampling frequency/Quantization bit
Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal
is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
Sampling frequency
Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate.
When the sampling frequency is higher, the range of frequencies that can be played back are wider.
Quantization bit
The number of quantization bits indicate the degree of accuracy when converting the sound level into a
numeric value. When the number of quantized bits is higher, the expression of the sound level is more
accurate.
WAV
Windows standard audio file format, which defines the method of recording the digital data obtained by
converting audio signals. By default, the PCM method (no compression) is used, but you can also use other
compression methods.
WMA (Windows Media Audio)
One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic
technologies, this compression method achieves a high compression rate. Reportedly, it is capable of
compressing data quantity by about 1/20 maintaining a certain level of audio quality.
Others
Bi-amplification connection (Bi-amp)
A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification
connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a
consequence, the tweeter and woofer provide clear audio signal without the interference.
LFE (Low Frequency Effects) 0.1 channel
This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This
channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio
effects. This channel is labeled 0.1 because it is limited to only low frequency audio.
Lip sync
Video output sometimes lags behind audio output due to the complexity of signal processing caused by an
increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag
between audio and video output.
HDMI
and video information
Component video signal
With the component video signal system, the video signal is separated into the Y signal for luminance and
the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because
each of these signals is independent.
Composite video signal
With the composite video signal system, color, brightness, and synchronization data signals are combined
and transmitted with a single cable.
Deep Color
Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available
colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems
process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology
allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate
on-screen color banding for smooth tonal transitions and subtle gradations between colors.
HDMI
HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video
signal transmission. This interface transmits both digital audio and digital video signals using a single cable
without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a
secure audio/video interface. For further information on HDMI, visit the HDMI website at
“http://www.hdmi.org/”.
x.v.Color
“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than
sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with
the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid,
natural images.
Network information
SSID
SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.
Wi-Fi
Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or connect to the
Internet wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the complexity of making
connections with LAN cables by using wireless connection. Only products that complete Wi-Fi Alliance
interoperability tests can carry the “Wi-Fi Certified” trademark.
WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy
establishment of a wireless home network.
00_RX-V479_V579_om_U.book Page 111 Wednesday, March 25, 2015 9:59 AM
En 112
Yamaha
technologies
CINEMA DSP (Digital Sound Field Processor)
Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is
best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions
(such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are
differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP,
Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own
home.
CINEMA DSP 3D
The actually measured sound field data contain the information of the height of the sound images. CINEMA
DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the
accurate and intensive 3D sound fields in a listening room.
Compressed Music Enhancer
The Compressed Music Enhancer feature compensates for missing harmonics in compression music
formats (such as MP3). As a result, this technology provides improved performance for the overall sound
system.
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for
headphones have been set for each sound program, so that accurate representations of all the sound
programs can be enjoyed on headphones.
Virtual CINEMA DSP
Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with
front left and right speakers. Even if the surround speakers are not connected, the unit creates the realistic
sound field in a listening room.
Virtual Presence Speaker (VPS)
Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without
front presence speakers. Even if the front presence speakers are not connected, the unit creates the 3D
sound field in your room.
YPAO (Yamaha Parametric room Acoustic Optimizer)
The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures
the distances from them to your listening position(s), and then automatically optimizes the speaker settings,
such as volume balance and acoustic parameters, to suit your room.
Virtual Surround Back Speaker (VSBS)
Virtual Surround Back Speaker allows the system to virtually reproduce the sound field of the surround back
speakers with surround speaker. Even if the surround back speakers are not connected, the unit adds a
sense of depth to the rear sound filed of CINEMA DSP.
Supported devices
BLUETOOTH devices
BLUETOOTH devices that support A2DP can be used.
Yamaha does not assure the connections of all BLUETOOTH devices.
USB devices
This unit supports USB mass storage class devices (e.g., flash memories or portable
audio players) using FAT16 or FAT32 format.
Do not connect devices other than USB mass storage class devices (such as USB
chargers or USB hubs), PCs, card readers, an external HDD, etc.
USB devices with encryption cannot be used.
Some features may not be compatible, depending on the model or manufacturer of
the USB storage device.
iPod
An iPod may not be detected by the unit or some features may not be compatible,
depending on the model or software version of the iPod.
AirPlay
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X
Mountain Lion or later and Mac and PC with iTunes 10.2.2 or later.
(as of April 2015)
Supported devices and file formats
Made for.
iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4,
iPhone 3GS, iPhone 3G
iPod touch (2nd, 3rd, 4th and 5th generation)
iPod nano (2nd, 3rd, 4th, 5th, 6th and 7th generation)
(as of April 2015)
00_RX-V479_V579_om_U.book Page 112 Wednesday, March 25, 2015 9:59 AM
En 113
File formats
USB, PC/NAS
* Linear PCM format only
To play back FLAC files stored on your PC/NAS, you need to install server software
that supports sharing of FLAC files via DLNA on your PC or use a NAS that supports
FLAC files.
Digital Rights Management (DRM) contents cannot be played back.
Video signals input from a video device to the unit are output to a TV as shown below.
File
Sampling
frequency
(kHz)
quantization
bit (bit)
Bitrate (kbps)
Number of
channels
Support for
gapless
playback
WAV *
32/44.1/48/
88.2/96/
176.4/192
16/24 - 2
MP3 32/44.1/48 - 8 to 320 2 -
WMA 32/44.1/48 - 8 to 320 2 -
MPEG-4 AAC 32/44.1/48 - 8 to 320 2 -
FLAC
32/44.1/48/
88.2/96/
176.4/192
16/24 - 2
ALAC
32/44.1/48/
88.2/96
16/24 - 2
AIFF
32/44.1/48/
88.2/96/
176.4/192
16/24 - 2
DSD
2.8 MHz/
5.6 MHz
1-2-
Video signal flow
HDMI
PR
PB
Y
COMPONENT
VIDEO
HDMI
PR
PB
Y
COMPONENT
VIDEO
VIDEOVIDEO
HDMI
PR
PB
Y
COMPONENT
VIDEO
HDMI
PR
PB
Y
COMPONENT
VIDEO
VIDEO VIDEO
Video device The unit TV
HDMI outHDMI in
COMPONENT VIDEO
in
VIDEO in
COMPONENT VIDEO
out
VIDEO out
HDMI connection
Component video connection (RX-V579 only)
Composite video connection
00_RX-V479_V579_om_U.book Page 113 Wednesday, March 25, 2015 9:59 AM
En 114
HDMI Control
HDMI Control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations. You can also control playback
devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with
an HDMI cable.
Operations available from the TV’s remote control
Standby synchronization
Volume control including mute
Switching to input audio from the TV when the TV input is switched to its built-in tuner
Switching to input video/audio from the selected playback device
Switching between audio output devices (the unit or TV speaker)
(Example)
Operations available from the unit’s remote control
Starting playback on the playback device and turning on the TV with a scene
selection (p.43)
Switching the TV input to display the “Setup” menu (when SETUP is pressed)
Controlling the playback device (playback and menu operations)
(Example)
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
For details on settings and operating your TV, refer to the instruction manual for the TV.
This setup is required every time you add a new HDMI Control-compatible device to your system.
1
Turn on the unit, TV, and playback devices.
2
Configure the settings of the unit.
a Switch the TV input to display video from the unit.
b Press SETUP.
c Use the cursor keys to select “HDMI” and press ENTER.
d Press ENTER again.
Information on HDMI
HDMI Control
Turn off the TV
The unit turns off
(standby)
HDMI Control
Playback device
also turns off
HDMI Control
Press SCENE (BD/DVD)
Turns on and displays
video from the playback
device
HDMI Control
Playback starts
MUTE
DISPLAYRETURN
SETUP
OPTION
ENTER
BLUETOOTH
MUTE
DISPLA
Y
A
A
RETURN
O
OPTION
BLUE
TO
OT
H
SETUP
Cursor keys
ENTER
Cursor keys
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Bluetooth
Language
Configuration
00_RX-V479_V579_om_U.book Page 114 Wednesday, March 25, 2015 9:59 AM
En 115
e Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to
select “On” as shown below.
f If you made a digital optical cable connection between the TV and the unit, use the
cursor keys (q/w ) to select “TV Audio Input” and the cursor keys (e/r) to select
“AV 1” (“AUDIO 1” on RX-V479).
g Press SETUP.
3
Enable HDMI Control on the TV and playback devices (such as HDMI
Control-compatible BD/DVD players).
4
Turn off the main power of the TV and then turn off the unit and
playback devices.
5
Turn on the unit and playback devices and then turn on the TV.
6
Switch the TV input to display the video from the unit.
7
Check the followings.
On the unit: The input to which the playback device is connected is selected.
If not, select the input source manually.
On the TV: The video from the playback device is displayed.
8
Check that the unit is properly synchronized with the TV by turning
off the TV or adjusting the TV volume with the TV remote control.
If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in
Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices
exceeds the limit. In this case, disable HDMI Control on the devices not in use.
If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on the TV.
If you reconnect the HDMI cable, perform the procedure 5-8 again.
We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
Audio Return Channel
(
ARC
)
ARC allows you to input TV audio to the unit with the HDMI cable which transmits video
signal to the TV.
Check the following after the HDMI Control settings.
1
Select a TV program with the TV remote control.
2
Check that the input source of the unit will be automatically switched
to “AV 4” (“AV 2” on RX-V479) and the TV audio will be played back
on the unit.
If you cannot hear the TV audio, check the following:
“ARC” (p.85) in the “Setup” menu is set to “On”.
The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack
marked “ARC”) on the TV.
Some HDMI jack on the TV is not compatible with ARC. For details, refer to the
instruction manual for the TV.
If the audio is interrupted while using ARC, set “ARC” (p.85) in the “Setup” menu to “Off” and use a digital
optical cable to input TV audio to the unit (p.19).
When using ARC, connect a TV with an HDMI cable that supports ARC.
“AV 4” (“AV 2” on RX-V479) is set as TV audio input at the factory. If you have connected any external
device to the AV 4 jacks, use “TV Audio Input” (p.84) in the “Setup” menu to change the TV audio input
assignment. To use the SCENE function (p.43), you also need to change the input assignment for SCENE
(TV).
Configuration
HDMI Control
Audio Output
Standby Through
TV Audio Input
Standby Sync
ARC
SCENE
On
Auto
Auto
AV4
Auto
On
Back: RETURN
08_appendix.fm Page 115 Wednesday, March 25, 2015 8:00 PM
En 116
HDMI
signal compatibility
Audio signals
Video signals
The unit is compatible with the video signals of the following resolutions:
When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
on the type of the DVD player.
The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction
manual for each device.
To decode audio bitstream signals on the unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.
Audio signal type Audio signal format Compatible media (example)
2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio
Multichannel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit
DVD-Audio, BD (Blu-ray disc),
HD DVD
DSD 2 to 5.1ch, 2.8224 MHz, 1 bit SACD
Bitstream Dolby Digital, DTS DVD-Video
Bitstream
(High definition audio)
Dolby TrueHD, Dolby Digital
Plus, DTS-HD Master Audio,
DTS-HD High Resolution Audio,
DTS Express
BD (Blu-ray disc), HD DVD
VGA 720p/60 Hz, 50 Hz
480i/60 Hz 1080i/60 Hz, 50 Hz
576i/50 Hz 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
480p/60 Hz 4K/30 Hz, 25 Hz, 24 Hz
576p/50 Hz 4K/60Hz (YCbCr4:2:0), 50Hz (YCbCr4:2:0)
00_RX-V479_V579_om_U.book Page 116 Wednesday, March 25, 2015 9:59 AM
En 117
Manufactured under license from Dolby Laboratories. Dolby,
Pro Logic, Surround EX, and the double-D symbol are trademarks of
Dolby Laboratories.
(For RX-V479)
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS,
DTS-HD, the Symbol, & DTS and the Symbol together are registered
trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
(For RX-V579)
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, &
DTS and the Symbol together are registered trademarks, and
DTS-HD Master Audio is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.
“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod or
iPhone, respectively, and has been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod or iPhone may
affect wireless performance.
iTunes, AirPlay,iPad, iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in the U.S. and other
countries.
iPad, iPhone, and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
This receiver supports network connections.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
DLNA™ and DLNA CERTIFIED™ are trademarks or registered
trademarks of Digital Living Network Alliance. All rights reserved.
Unauthorized use is strictly prohibited.
Windows™
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
Internet Explorer, Windows Media Audio and Windows Media Player
are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Android™
Google Play™
Android and Google Play are trademarks of Google Inc.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi
Alliance.
The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha
Corporation is under license.
Bluetooth protocol stack (Blue SDK)
Copyright 1999-2014 OpenSynergy GmbH
All rights reserved. All unpublished rights reserved.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
Trademarks
Explanations regarding GPL
This product utilizes GPL/LGPL open-source software in some
sections. You have the right to obtain, duplicate, modify, and
redistribute this open-source code only. For information on
GPL/LGPL open source software, how to obtain it, and the
GPL/LGPL license, refer to the Yamaha Corporation website
(http://download.yamaha.com/sourcecodes/musiccast/).
08_appendix.fm Page 117 Wednesday, March 25, 2015 7:02 PM
En 118
Input jacks
Analog Audio
Audio x 4
Digital Audio (Supported frequencies: 32 kHz to 96 kHz)
Optical x 1
Coaxial x 2
•Video
Composite x 4
Component x 2 [RX-V579]
HDMI Input
HDMI x 6
• Other jacks
- USB x 1 (USB2.0)
- NETWORK (Wired) x 1 (100Base-TX/10Base-T)
- NETWORK (Wireless) x 1 (IEEE802.11b/g/n)
Output jacks
Analog Audio
[RX-V579]
- Speaker Out x 7 (FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R*)
* Note: assignment is possible. [SURROUND BACK,
BI-AMP (FRONT L/R), ZONE B]
- Subwoofer Out x 2 (mono x 2)
- Headphone x 1
[RX-V479]
- Speaker Out x 5 (FRONT L/R, CENTER, SURROUND L/R)
- Subwoofer Out x 1
- Headphone x 1
•Video
Composite x 1
Component x 1 [RX-V579]
HDMI Output
HDMI OUT x 1
Other jacks
YPAO MIC x 1
HDMI
HDMI Features: Deep Color, “x.v.Color,” Auto Lip Sync, ARC
(Audio Return Channel), 3D, 4K Ultra HD
• Video Format (Repeater Mode)
-VGA
- 480i/60 Hz
- 576i/50 Hz
- 480p/60 Hz
- 576p/50 Hz
- 720p/60 Hz, 50 Hz
- 1080i/60 Hz, 50 Hz
- 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
- 4K/30 Hz, 25 Hz, 24 Hz
- 4K/60Hz (YCbCr4:2:0), 50Hz (YCbCr4:2:0)
Audio Format
- Dolby TrueHD
- Dolby Digital Plus
- Dolby Digital
- DTS-HD Master Audio
- DTS-HD High Resolution Audio
- DTS Express
-DTS
- DSD 2-ch to 6-ch
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
Content Protection: HDCP compatible
(HDMI 6 jack: HDCP 2.2 compatible)
Link Function: CEC supported
TUNER
Analog Tuner
[U.K. and Europe models]
FM/AM with Radio Data System x 1 (TUNER)
[Other models]
FM/AM x 1 (TUNER)
USB
Capable of iPod, Mass Storage Class USB Memory
Current Supply Capacity: 1.0 A
BLUETOOTH
BLUETOOTH version ...........................................Ver. 2.1+EDR
Supported profile ............................................................ A2DP
Supported codec..................................................... SBC, AAC
Wireless output ...................................... BLUETOOTH Class 2
Maximum communication distance
............................................... 10 m (33 ft) without interference
Network
• PC Client Function
• Compatible with DLNA ver. 1.5
• AirPlay supported
• Internet Radio
• Wi-Fi function
- Capable of WPS by PIN Method and Push-Button-Method
- Capable of sharing with iOS devices by wireless connection
and USB connection
- Capable of Direct Connection with Mobile Device
- Available Security Method: WEP, WPA2-PSK (AES), Mixed
Mode
- Radio Frequency Band: 2.4GHz
- Wireless Network Standard: IEEE 802.11 b/g/n
Specifications
00_RX-V479_V579_om_U.book Page 118 Wednesday, March 25, 2015 9:59 AM
En 119
Compatible Decoding Formats
• Decoding Format
- Dolby TrueHD, Dolby Digital Plus
- Dolby Digital EX [RX-V579]
- Dolby Digital
- DTS-HD Master Audio, DTS-HD High Resolution Audio,
DTS Express
- DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
• Post Decoding Format
[RX-V579]
- Dolby Pro Logic
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,
Dolby Pro Logic II Game
- Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie,
Dolby Pro Logic IIx Game
- DTS Neo: 6 Music, DTS Neo: 6 Cinema
[RX-V479]
- Dolby Pro Logic
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,
Dolby Pro Logic II Game
- DTS Neo: 6 Music, DTS Neo: 6 Cinema
Audio Section
• Rated Output Power (2-channel driven)
[U.S.A. and Canada models] (
20 Hz to 20 kHz, 0.09% THD, 8
Ω
)
[Other models] (20 Hz to 20 kHz, 0.09% THD, 6 Ω)
Front L/R .................................................................80 W+80 W
[U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω)
Front L/R .................................................................95 W+95 W
Center............................................................................... 95 W
Surround L/R...........................................................95 W+95 W
Surround Back L/R [RX-V579]............................... 95 W+95 W
• Rated Output Power (1-channel driven)
[U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω)
[Other models] (1 kHz, 0.9% THD, 6 Ω)
Front L/R .................................................................... 115 W/ch
Center ....................................................................... 115 W/ch
Surround L/R.............................................................. 115 W/ch
Surround Back L/R [RX-V579]................................... 115 W/ch
Maximum Effective Output Power (1-channel driven)
[U.S.A. and Canada models] (1 kHz, 10% THD, 8 Ω)
Front L/R.....................................................................140 W/ch
Center.........................................................................140 W/ch
Surround L/R ..............................................................140 W/ch
Surround Back L/R [RX-V579]....................................140 W/ch
[Other models] (1 kHz, 10% THD, 6 Ω)
Front L/R.....................................................................135 W/ch
Center.........................................................................135 W/ch
Surround L/R ..............................................................135 W/ch
Surround Back L/R [RX-V579]....................................135 W/ch
• Dynamic Power (IHF)
[U.S.A. and Canada models]
RX-V479:
Front L/R (8/6/4/2 Ω)................................110/130/160/180 W
RX-V579:
Front L/R (8/6/4/2 Ω)................................120/140/170/190 W
[Other models]
RX-V479:
Front L/R (6/4/2 Ω)..........................................110/130/160 W
RX-V579:
Front L/R (6/4/2 Ω)..........................................120/140/170 W
Damping Factor
Front L/R, 20 Hz to 20 kHz, 8 Ω............................. 100 or more
• Input Sensitivity / Input Impedance
AV 4 etc. (1 kHz, 100 W/6 Ω).............................. 200 mV/47 kΩ
Maximum Input Signal
AV 4 etc. (1 kHz, 0.5% THD, Effect On) ............................2.3 V
Output Level / Output Impedance
SUBWOOFER........................................................... 1 V/1.2 kΩ
Headphone Jack Rated Output / Impedance
AV 4 etc. (1 kHz, 50 mV, 8 Ω).............................100 mV/470 Ω
Frequency Response
AV 4 etc. to Front (10 Hz to 100 kHz)..........................+0/-3 dB
Signal to Noise Ratio (IHF-A Network)
AV 4 etc. (DIRECT)
(Input 1
kΩ
Shorted, Speaker Out)
.........................................................................110 dB or more
• Residual Noise (IHF-A Network)
Front L/R (Speaker Out) ..................................... 150 µV or less
• Channel Separation
AV 4 etc. (Input 1 kΩ Shorted, 1 kHz/10 kHz)
.................................................................70 dB/50 dB or more
• Volume Control
Range..............................................MUTE, -80 dB to +16.5 dB
Step.................................................................................0.5 dB
• Tone Control Characteristics
Bass Boost/Cut .............................±6 dB/0.5 dB Step at 50 Hz
Bass Turnover ................................................................350 Hz
Treble Boost/Cut.......................... ±6 dB/0.5 dB Step at 20 kHz
Treble Turnover .............................................................3.5 kHz
• Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround).................................12 dB/oct.
H.P.F. (Surround Back [RX-V579]).............................12 dB/oct.
L.P.F. (Subwoofer) .....................................................24 dB/oct.
00_RX-V479_V579_om_U.book Page 119 Wednesday, March 25, 2015 9:59 AM
En 120
Video Section
Video Signal Type
[U.S.A., Canada, Korea, Taiwan and General models].. NTSC
[Other models]................................................................... PAL
Video Signal Level
Composite .............................................................1 Vp-p/75 Ω
Component
Y.......................................................................... 1 Vp-p/75 Ω
Pb/Pr ................................................................0.7 Vp-p/75 Ω
Video Maximum Input Level .......................... 1.5 Vp-p or more
Video Signal to Noise Ratio ................................50 dB or more
• Monitor Out Frequency Response
Component............................................5 Hz to 60 MHz, -3 dB
FM Section
• Tuning Range
[U.S.A. and Canada models] ..............87.5 MHz to 107.9 MHz
[Asia, Taiwan and General models]
.......................................87.5/87.50 MHz to 108.0/108.00 MHz
[Other models].................................87.50 MHz to 108.00 MHz
50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono................................................................. 3 µV (20.8 dBf)
Signal to Noise Ratio (IHF)
Mono................................................................................65 dB
Stereo .............................................................................. 64 dB
Harmonic Distortion (IHF, 1 kHz)
Mono................................................................................. 0.5%
Stereo ............................................................................... 0.6%
Antenna Input ................................................75 Ω unbalanced
AM section
• Tuning Range
[U.S.A. and Canada models] ..................530 kHz to 1710 kHz
[Asia, Taiwan and General models]
................................................. 530/531 kHz to 1710/1611 kHz
[Other models]......................................... 531 kHz to 1611 kHz
General
• Power Supply
[U.S.A. and Canada models]..........................AC 120 V, 60 Hz
[Taiwan and General model]
.......................................AC110 to 120/220 to 240 V, 50/60 Hz
[China model]..................................................AC 220 V, 50 Hz
[Korea model] .................................................AC 220 V, 60 Hz
[Australia model] .............................................AC 240 V, 50 Hz
[U.K. and Europe models] ..............................AC 230 V, 50 Hz
[Asia model] ....................................AC 220 to 240 V, 50/60 Hz
• Power Consumption........................................................260 W
Standby Power Consumption
HDMI Control Off, Standby Through Off, Network Standby Off
.........................................................................................0.1 W
HDMI Control On, Standby Through On (No Signals),
Network Standby Off ........................................................1.6 W
HDMI Control Off, Standby Through Off, Network Standby On,
Bluetooth Standby Off
Wired ................................................................................1.9 W
Wireless (Wi-Fi) ................................................................1.9 W
Wireless Direct .................................................................2.0 W
HDMI Control Off, Standby Through Off, Network Standby On
(Wired), Bluetooth Standby On ........................................2.0 W
HDMI Control On, Standby Through On (No Signals),
Network Standby On (Wireless Direct), Bluetooth Standby On
.........................................................................................3.1 W
Maximum Power Consumption
[Asia, Taiwan and General models] ................................600 W
Dimensions (W x H x D)
..................... 435 x 161 x 327 mm (17-1/8” x 6-3/8” x 12-7/8”)
• Reference Dimensions (with wireless antenna upright)
..................... 435 x 221 x 327 mm (17-1/8” x 8-3/4” x 12-7/8”)
* Including legs and protrusions
•Weight
8.1 kg (17.9 lbs)
* Specifications are subject to change without notice.
00_RX-V479_V579_om_U.book Page 120 Wednesday, March 25, 2015 9:59 AM
En 121
Symbols
Envelope icon (p) 76
Lock icon (o) 90
Numerics
2.1-channel system 14
2ch Stereo 46
4K Ultra HD 18
5.1-channel system 13
, 16
7.1-channel system 13
, 16
7ch Stereo 46
A
Adaptive DRC 73
ADVANCED SETUP 96
AirPlay 57
AM radio 49
ARC (Audio Return Channel) 85
, 115
Audio Decoder (front display information) 71
Auto Power Standby 89
Auto Preset (FM radio) 50
B
Banana plug 17
Bi-amp 17
, 80
BLUETOOTH 53
Bookmark 67
C
CINEMA DSP 45
Compressed Music Enhancer 48
Crossover 28
, 81
D
Decoder Off (front display information) 71
Dimmer (Front Display) 90
DIRECT 48
DLNA 64
DMC (Digital Media Controller) 93
DSP Program (front display information) 71
E
ECO 89
Equalizer 82
Error indication (front display) 109
Extended Surround 73
Extra Bass 48
, 81
F
Firmware update 98, 99
FM radio 49
Frequency step setting 49
, 97
Front display information 71
H
HDCP 21, 106
HDMI signal compatibility 116
I
Initial Volume 87
Input (front display information) 71
Input Trim 74
Internet radio 65
iPod content playback 54
iPod content playback (AirPlay) 57
L
Language 95
Lipsync 74
, 87
M
MAC Address 92, 93
Max Volume 87
Memory Guard 90
Menu language selection 27
Multiple room playback 68
Muting 42
N
NAS content playback 62
Network Connection 92
Network information 92
Network Name 93
Network Standby 93
O
Option menu 72
P
PEQ 82
Power Amp Assign 80
Preset station selection (FM/AM radio) 51
R
Radio Data System tuning 52
Registering favorite items (shortcut) 70
Remote control 10
Remote ID 97
Rename 93
Repeat 56
, 61, 64
S
SCENE 43, 85
Setup menu 76
Shortcut 70
Shuffle 56
, 61, 64
Signal information 74
Sleep timer 10
Sound program 45
Speaker impedance 12
, 15, 96
Standby Through 84
Straight decode 47
Subwoofer Trim 74
Surround decoder 47
Index
00_RX-V479_V579_om_U.book Page 121 Wednesday, March 25, 2015 9:59 AM
En 122
T
Test Tone 83
Tone Control 73
U
USB storage device content playback 59
V
Video/audio input jack combination 22
Virtual CINEMA FRONT 13
, 46, 82
Virtual Surround Back Speaker (VSBS) 73
Volume scale 87
W
Wireless (Wi-Fi) 33, 92
Wireless Direct 40
, 92
WPS 33
, 35
Y
YPAO
(Yamaha Parametric room Acoustic Optimizer) 28
Z
Zone B 68, 80
00_RX-V479_V579_om_U.book Page 122 Wednesday, March 25, 2015 9:59 AM
© 2015 Yamaha Corporation YG906B0/EN1
00_RX-V479_V579_om_U.book Page 123 Wednesday, March 25, 2015 9:59 AM

Transcripción de documentos

00_RX-V479_V579_om_U.book Page 1 Wednesday, March 25, 2015 9:59 AM AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit. English 00_RX-V479_V579_om_U.book Page 2 Wednesday, March 25, 2015 9:59 AM CONTENTS Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 8 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 27 9 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . . 28 FEATURES 5 Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 10 Connecting to a network wirelessly . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Selecting the connection method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Connecting the unit to a wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Connecting a mobile device to the unit directly (Wireless Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PREPARATIONS 11 PLAYBACK 42 Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Selecting the input source and favorite settings with one touch General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 (SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5.1-channel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 7.1-channel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Connecting front speakers that support bi-amp connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Connecting Zone B speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Selecting a registered scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Enjoying stereoscopic sound fields (CINEMA DSP 3D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Enjoying pure high fidelity sound (direct playback) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Enhancing the bass (Extra Bass) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . 48 3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Setting the frequency steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Registering favorite radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Connecting to the jack on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Playing back music via BLUETOOTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 5 Connecting the FM/AM antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Playback BLUETOOTH device music on the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 6 Preparing for connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 7 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Playback of iPod content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 En 2 00_RX-V479_V579_om_U.book Page 3 Wednesday, March 25, 2015 9:59 AM Playing back music with AirPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Changing the speaker impedance setting (SP IMP.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Selecting the remote control ID (REMOTE ID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Changing the FM/AM tuning frequency setting (TU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Restoring the default settings (INIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Updating the firmware (UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 59 Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 62 Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Playback of Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Registering favorite Internet radio stations (bookmarks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Playing back music in multiple rooms (RX-V579 only) . . . . . . . . . . . . . 68 Updating the unit’s firmware via the network . . . . . . . . . . . . . . . . . . . . 99 APPENDIX Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Connecting Zone B speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Operating the Zone B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 BLUETOOTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 Useful functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Registering favorite items (shortcut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Configuring playback settings for different playback sources (Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 100 Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 76 Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110 HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 Network information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 Yamaha technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . . 76 Supported devices and file formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 CONFIGURATIONS Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Configuring the system settings (ADVANCED SETUP menu) . . . . . . . . 96 ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 En Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114 Audio Return Channel (ARC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 3 00_RX-V479_V579_om_U.book Page 4 Wednesday, March 25, 2015 9:59 AM Accessories Operating range of the remote control Check that the following accessories are supplied with the product. • Point the remote control at the remote control sensor on the unit and remain within the operating range shown below. Remote control Batteries (AAA, R03, UM-4) (x2) Within 6 m (20 ft) 30° 30° Insert the batteries the right way round. AM antenna FM antenna *One of the above is supplied depending on the region of purchase. YPAO microphone • The illustrations of the main unit used in this manual are of the RX-V579 (U.S.A. model), unless otherwise specified. • Some features are not available in certain regions. • Due to product improvements, specifications and appearance are subject to change without notice. CD-ROM (Owner’s Manual) • This manual explains operations using the supplied remote control. Easy Setup Guide • This manual describes all the “iPod” and “iPhone” as the “iPod”. “iPod” refers to both “iPod” and “iPhone” unless otherwise specified. Safety Brochure En 4 • indicates precautions for use of the unit and its feature limitations. • indicates supplementary explanations for better use. 00_RX-V479_V579_om_U.book Page 5 Wednesday, March 25, 2015 9:59 AM FEATURES What you can do with the unit Wide variety of supported content • iPod/iPhone • USB • Media server (PC/NAS) • Internet radio • AirPlay • BLUETOOTH . . . . . . Supports 2- to 5.1-channel (to 7.1-channel*) speaker system. Allows you to enjoy your favorite acoustic spaces in various styles. p.54 p.59 p.62 p.65 p.57 p.53 • Automatically optimizing the speaker . p.28 settings to suit your room (YPAO) • Reproducing stereo or multichannel sounds with the sound fields like actual movie theaters and concert halls (CINEMA DSP) * * . p.45 • Enjoying compressed music with . p.48 enhanced sound (Compressed Music Enhancer) • Playing back music in multiple rooms . p.68 (Zone B)* Network contents * RX-V579 only Speakers Audio BLUETOOTH device Audio HDMI Control USB device 4K Ultra HD signal and HDCP 2.2 supported Audio HDMI Control Audio/Video BD/DVD player Audio/Video TV AV receiver (the unit) Wireless connection to a network . p.25 Change the input source and favorite settings with one touch (SCENE) . p.43 Sequential operation of a TV, AV receiver, and BD/DVD player (HDMI Control) TV remote control En 5 . p.114 00_RX-V479_V579_om_U.book Page 6 Wednesday, March 25, 2015 9:59 AM Full of useful functions! About “AV SETUP GUIDE” About “AV CONTROLLER” ❑ Connecting various devices (p.21) ❑ Application for tablets “AV SETUP GUIDE” ❑ Application for smartphone / tablets “AV CONTROLLER” A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, portable audio player, and other devices. AV SETUP GUIDE is an application that assists you with cable connections between AV receiver and source devices as well as AV receiver setup. This app guides you through the various settings such as speaker connections, TV and source device connections and assigning the power amp. ❑ Playing back TV audio in surround sound with a single HDMI cable connection (Audio Return Channel: ARC) (p.19) AV CONTROLLER provides you the flexibility to control the available inputs, volume, mute and power commands. It lets users change a song from Internet Radio, USB and command FM/AM tuners or any other internally available source. When using an ARC -compatible TV, you only need one HDMI cable to enable video output to the TV, audio input from the TV, and the transmission of HDMI Control signals. Functions: Functions: 1) Connection support guide – Power on/off – Speaker connection – Volume up/down – TV/source devices connection – Mute ❑ Creating 3-dimensional sound fields (p.45) 2) Setup support guide – Music Play – Automatic network setup of HDMI, power amp assign, etc. – Input Selection The Virtual Presence Speaker (VPS) function and Virtual Surround Back Speaker (VSBS) function (RX-V579 only) allow you to create a 3-dimensional sound field that spreads up and deep in your own room (CINEMA DSP 3D). – Various setup assistance with illustrations. – DSP Mode Selection – SCENE selection – YPAO setting guidance – Blu-ray player fundamental control 3) View owner’s manual ❑ Surround playback with 5 speakers placed in front (p.46) – Seamless control between the Yamaha AV receiver and Blu-ray player * This application is for tablets only. – Demo mode - Explains how to use this app You can enjoy the surround sound even when the surround speakers are placed in front. For details, search for “AV SETUP GUIDE” on the App Store or Google Play. For details, search for “AV CONTROLLER” on the App Store or Google Play. ❑ Enjoying pure high fidelity sound (p.48) When the direct playback mode is enabled, the unit plays back the selected source with the least circuitry, which lets you to enjoy Hi-Fi sound quality. ❑ Low power consumption The ECO mode (power saving function) reduces the unit’s power consumption and helps to create an eco-friendly home theater system (p.89). En 6 00_RX-V479_V579_om_U.book Page 7 Wednesday, March 25, 2015 9:59 AM Part names and functions Front panel a b c d e f g h i j k DIRECT YPAO MIC INFO (WPS) MEMORY PRESET FM AM TUNING VOLUME SCENE BD DVD PHONES INPUT NET TV STRAIGHT PROGRAM TONE CONTROL RADIO SILENT CINEMA AUX (CONNECT) AUDIO l 1 z (power) key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.84) • Standby Through is enabled (p.84) • Network Standby is enabled (p.93) • An iPod is being charged (p.54) 3 YPAO MIC jack For connecting the supplied YPAO microphone (p.28). 4 Remote control sensor Receives remote control signals (p.4). 5 INFO (WPS) key Selects the information displayed on the front display (p.71). Enters the wireless LAN connection setup (WPS button configuration) by holding down for 3 seconds (p.35). m n o p q r 5V 1A s 6 MEMORY key t D TONE CONTROL key Registers FM/AM radio stations as preset stations (p.50). 7 PRESET keys Select a preset FM/AM radio station (p.51). 8 FM and AM keys Switch between FM and AM (p.49). 9 TUNING keys Adjusts the high-frequency range and low-frequency range of output sounds (p.73). E SCENE keys Select the registered input source and sound program with one touch. Also, turns on the unit when it is in standby mode (p.43). F PROGRAM keys Select the radio frequency (p.49). 0 Front display Select a sound program or a surround decoder (p.44). G STRAIGHT key Displays information (p.8). Enables/disables the straight decode mode (p.47). A DIRECT key H AUX jack Enables/disables the direct playback mode (p.48). B PHONES jack For connecting devices, such as portable audio players (p.24). I USB jack For connecting headphones. For connecting a USB storage device (p.59) or an iPod (p.54). C INPUT keys Select an input source. J VOLUME knob Adjusts the volume. En 7 00_RX-V479_V579_om_U.book Page 8 Wednesday, March 25, 2015 9:59 AM Front display (indicators) a b c d ENHANCER STEREO TUNED CHARGE f e OUT 1 2 ECO g h PARTY SLEEP MUTE ZONE ZONE 2 A 3 B VOL. ADAPTIVE DRC VIRTUAL i j 1 HDMI Lights up when HDMI signals are being input or output. OUT Lights up when HDMI signals are being output. 2 ENHANCER Lights up when Compressed Music Enhancer (p.48) is working. 3 CINEMA DSP Lights up when CINEMA DSP (p.45) or CINEMA DSP 3D (p.45) is working. 4 STEREO Lights up when the unit is receiving a stereo FM radio signal. TUNED Lights up when the unit is receiving an FM/AM radio station signal. 5 BLUETOOTH indicator k l 7 MUTE m j n o D Speaker indicators Blinks when audio is muted. 8 Volume indicator Indicates the current volume. 9 ECO Lights up when the eco mode (p.89) is enabled. 0 Cursor indicators Indicate the remote control cursor keys currently operational. A Information display Displays the current status (such as input name and sound mode name). You can switch the information by pressing INFO (p.71). * RX-V579 only E ADAPTIVE DRC B Signal strength indicator Indicates the strength of the wireless signal (p.32). C ZONE indicators (RX-V579 only) Indicate the zone to which the sound is output (p.69). Light up while the unit is connecting to a BLUETOOTH device. 6 SLEEP Lights up when the sleep timer is on. En Indicate speaker terminals from which signals are output. A Front speaker (L) S Front speaker (R) D Center speaker F Surround speaker (L) G Surround speaker (R) H Surround back speaker (L)* J Surround back speaker (R)* K Surround back speaker* L Subwoofer 8 Lights up when Adaptive DRC (p.73) is working. 00_RX-V479_V579_om_U.book Page 9 Wednesday, March 25, 2015 9:59 AM Rear panel a b c d e f (RX-V579 U.S.A. model) W HDMI OUT HDMI 1 HDCP2.2 (BD/DVD) HDMI 2 HDMI 5 HDMI 4 HDMI 3 HDMI 6 NETWORK HDCP2.2 (NET) SS ARC ANTENNA FM (RADIO) AM PR COMPONENT VIDEO PR PB 75 Ω PB SPEAKERS SURROUND BACK/BI AMP /ZONE B VIDEO FRONT CENTER SURROUND SINGLE Y Y VIDEO COMPONENT VIDEO MONITOR OUT 1 OPTICAL (TV) AV 1 COAXIAL COAXIAL AV 2 AV 3 AV 4 AV 5 AV 6 g 2 SUBWOOFER PRE OUT h i 1 ANTENNA jacks For connecting to FM and AM antennas (p.24). 2 HDMI OUT jack For connecting to an HDMI-compatible TV and outputting video/audio signals (p.19). When using ARC, TV audio signal can also be input through the HDMI OUT jack. 3 HDMI 1–6 jacks For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.21). j k 7 AV jacks AUDIO jacks (RX-V479) 0 SPEAKERS terminals For connecting to speakers (p.16). For connecting to video/audio playback devices and inputting video/audio signals (p.21). • The SURROUND BACK/BI AMP/ZONE B jacks are available on RX-V579 only. • The COMPONENT jacks are available on RX-V579 only. 8 MONITOR OUT jacks For connecting to a TV and outputting video signals (p.19). 4 NETWORK jack For a wired connection to a network (p.25). 5 Wireless antenna For a wireless (Wi-Fi) connection to a network (p.25). * The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections. • The COMPONENT jacks are available on RX-V579 only. 9 SUBWOOFER PRE OUT jack For connecting to a subwoofer (with built-in amplifier) (p.16). 6 Power cable For connecting to an AC wall outlet (p.26). • (RX-V579 only) You can connect 2 subwoofers (with built-in amplifier) to the unit. En 9 A VOLTAGE SELECTOR (Taiwan and General models only) Selects the switch position according to your local voltage (p.26). 00_RX-V479_V579_om_U.book Page 10 Wednesday, March 25, 2015 9:59 AM Remote control 1 Remote control signal transmitter a b c d Transmits infrared signals. ZONE B k SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS e 4 SCENE keys Select the registered input source and sound program with one touch. Also, turn on the unit when it is in standby mode (p.43). USB INPUT VOLUME l SETUP OPTION ENTER h RETURN TOP MENU DISPLAY HOME POP-UP/MENU i Select a sound mode (p.44). m n Select an input source for playback. You can select directly each input source by pressing the following keys. FM/AM FM/AM radio USB USB jack (on the front panel) NET SERVER, NET RADIO, AirPlay and network sources (press repeatedly to select a desired source) BLUETOOTH BLUETOOTH device GREEN YELLOW BLUE MEMORY TUNING TUNING • You can assign the unit's functions to the RED/GREEN/ YELLOW/BLUE keys (p.91). 0 Radio keys Operate the FM/AM radio when “TUNER” is selected as the input source (p.49). MEMORY Registers FM/AM radio stations as presets. PRESET Select a preset station. TUNING Select the radio frequency. A z (receiver power) key Turns on/off (standby) the unit. B VOLUME keys Adjust the volume. C MUTE key Mutes the audio output. D OPTION key 7 SETUP key Displays the setup menu (p.76). RED j 5 Sound mode keys 6 Input selection keys BLUETOOTH MUTE • The playback devices must support HDMI Control. However, Yamaha does not assure the operation of all HDMI Control-compatible devices. Enable/disable the audio output to Zone A or Zone B (p.69). PROGRAM NET g Switches the unit to standby mode automatically after a specified period of time has elapsed (sleep timer). Press repeatedly to set the time (120 min, 90 min, 60 min, 30 min, off). 3 ZONE switch (RX-V579 only) FM/AM f Let you perform playback operations when “USB” or “NET” is selected as the input source, or control playback of the HDMI Control-compatible playback device. 2 SLEEP key ZONE A 890 External device operation keys 8 Menu operation keys Cursor keys Select a menu or a parameter. ENTER Confirms a selected item. RETURN Returns to the previous screen. PRESET (RX-V579) En 10 Displays the option menu (p.72). 00_RX-V479_V579_om_U.book Page 11 Wednesday, March 25, 2015 9:59 AM PREPARATIONS General setup procedure 1 Placing speakers (p.12) Select the speaker layout for the number of speakers that you are using and place them in your room. 2 Connecting speakers (p.16) Connect the speakers to the unit. 3 Connecting a TV (p.19) Connect a TV to the unit. 4 Connecting playback devices (p.21) Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit. 5 Connecting the FM/AM antennas (p.24) Connect the supplied FM/AM antennas to the unit. 6 Preparing for connecting to a network (p.25) 7 Connecting the power cable (p.26) Connect the unit to a network with a commercially-available network cable. After all the connections are complete, plug in the power cable. 8 Selecting an on-screen menu language (p.27) Select the desired on-screen menu language. 9 Optimizing the speaker settings automatically (YPAO) (p.28) Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room (YPAO). 10 Connecting to a network wirelessly (p.32) Connect the unit to a network wirelessly. This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit! En 11 00_RX-V479_V579_om_U.book Page 12 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout examples. Caution • (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” (p.15). • (Except for U.S.A. and Canada models) Use speakers with an impedance of at least 6 Ω. • Use a subwoofer with built-in amplifier. • Be sure to connect the front left and right speakers. Speaker system (the number of channels) Speaker type Front (L) Abbr. Function 1 Front (R) 2 Center 3 Surround (L) 4 Produce front left/right channel sounds (stereo sounds). Produces center channel sounds (such as movie dialogue and vocals). 7.1*1 6.1*1 5.1 5.1 (Virtual CINEMA FRONT) 4.1 3.1 2.1 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●*2 ● ● ● ● ●*2 ● ● ● ● ● Produce surround left/right channel sounds. Surround (R) 5 Surround back (L)*1 6 ● Produce surround back left/right channel sounds. Surround back (R)*1 7 Surround back*1 8 Produces sounds mixed from surround back left/right channel sounds. Subwoofer 9 Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels. This channel is counted as “0.1”. ● *1 RX-V579 only *2 Place the surround speakers in front and set “Virtual CINEMA FRONT” (p.82) in the “Setup” menu to “On”. • RX-V579 supports 2- to 7.1-channel system, and RX-V479 supports 2- to 5.1-channel speaker system. • (RX-V579 only) You can connect two subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds. En 12 ● ● ● ● ● 00_RX-V479_V579_om_U.book Page 13 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 7.1-channel system (RX-V579 only) 1 9 5.1-channel system 2 3 1 9 4 9 5 10° to 30° 3 4 10° to 30° 6 2 5 10° to 30° 10° to 30° 7 30 cm (1 ft) or more • You can enjoy surround sound even without the center speaker (front 4.1-channel system). • You can place the subwoofer either in the left or right side. 5.1-channel system (Virtual CINEMA FRONT) 6.1-channel system (RX-V579 only) 1 2 1 2 4 9 3 4 9 5 3 5 10° to 30° 10° to 30° 8 • To utilize this configuration, set “Virtual CINEMA FRONT” (p.82) in the “Setup” menu to “On”. • You can enjoy surround sound even without the center speaker (front 4.1-channel system). • You can place the subwoofer either in the left or right side. En 13 00_RX-V479_V579_om_U.book Page 14 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 4.1-channel system 2.1-channel system 1 2 1 9 9 4 5 10° to 30° 10° to 30° 3.1-channel system 1 9 2 3 En 14 2 00_RX-V479_V579_om_U.book Page 15 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ■ Setting the speaker impedance (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to “6 Ω MIN”. 1 Before connecting speakers, connect the power cable to an AC wall outlet. 2 While holding down STRAIGHT on the front panel, press z (power). z (power) STRAIGHT 3 Check that “SP IMP.” is displayed on the front display. CHARGE OUT 1 2 ECO ENHANCER STEREO TUNED PARTY SLEEP MUTE ZONE ZONE 2 A 3 B VOL. SP IMP.••8¬MIN 4 5 ADAPTIVE DRC VIRTUAL Press STRAIGHT to select “6 Ω MIN”. Press z (power) to set the unit to standby mode and remove the power cable from the AC wall outlet. You are now ready to connect the speakers. En 15 00_RX-V479_V579_om_U.book Page 16 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 2 Connecting speakers Connect the speakers placed in your room to the unit. The following diagrams provide connections for 5.1and 7.1-channel systems as examples. For other systems, connect speakers while referring to the connection diagram for the 5.1-channel system. Caution 5.1-channel system 7.1-channel system (RX-V579 only) The unit (rear) The unit (rear) SPEAKERS DC OUT 5V 0.5A PB FRONT CENTER SURROUND SURROUND BACK/BI AMP /ZONE B SPEAKERS DC OUT 5V 0.5A PB FRONT CENTER SURROUND BACK/BI AMP /ZONE B SURROUND SINGLE SINGLE • Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers. • Ensure that the core wires of the speaker cable do not touch one another or come into contact with the unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit, “Check SP Wires” will appear on the front display when the unit is turned on. Y Y OR OUT OR OUT 1 1 2 SUBWOOFER PRE OUT 2 SUBWOOFER PRE OUT Cables required for connection (commercially available) Speaker cables (x the number of speakers) + – + – 1 Audio pin cable (x1: for connecting a subwoofer) 9 1 2 9 3 4 5 En 16 3 9 4 5 6 • (RX-V579 only) You can connect 2 subwoofers (with built-in amplifier) to the unit. The 2 subwoofers output the same sound. 2 7 • When using only one surround back speaker, connect it to the SINGLE jack (L side). 00_RX-V479_V579_om_U.book Page 17 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ■ Connecting speaker cables Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminal. a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together. b Loosen the speaker terminal. c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the terminal. Connecting front speakers that support bi-amp connections (RX-V579 only) When using front speakers that support bi-amp connections, connect them to the FRONT jacks and SURROUND BACK/BI-AMP/ZONE B jacks. To enable the bi-amp function, set “Power Amp Assign” (p.80) in the “Setup” menu to “BI-AMP” after connecting the power cable to an AC wall outlet. The unit (rear) SPEAKERS FRONT CENTER SURROUND SURROUND BACK/BI AMP /ZONE B SINGLE d Tighten the terminal. + (red) b c FR ON T a d - (black) (U.S.A., Canada, China, Australia, Taiwan and General models only) 1 a Tighten the speaker terminal. b Insert a banana plug into the end of the terminal. a • Before making bi-amp connections, remove any brackets or cables that connect a woofer with a tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp connections, make sure that the brackets or cables are connected before connecting the speaker cables. Connecting Zone B speakers (RX-V579 only) The Zone A/B function allows you to playback an input source in the room where the unit is installed (Zone A) and in another room (Zone B). To connect the Zone B speakers, see “Playing back music in multiple rooms (RX-V579 only)” (p.68). • Surround back speakers or bi-amplified front speakers cannot be used while the Zone B function is enabled. Using a banana plug Banana plug Caution 2 3 9 FR ON T 4 5 b ■ Connecting the subwoofer (with built-in amplifier) Use an audio pin cable to connect the subwoofer. Audio pin cable 1 • Surround back speakers or Zone B speakers cannot be used during bi-amp connections. AV 6 2 • The FRONT jacks and SURROUND BACK/BI-AMP/ZONE B jacks output the same signals. En 17 00_RX-V479_V579_om_U.book Page 18 Wednesday, March 25, 2015 9:59 AM Input/output jacks and cables ■ Video/audio jacks ■ Video jacks ■ Audio jacks ❑ HDMI jacks ❑ COMPONENT VIDEO jacks (RX-V579 only) ❑ OPTICAL jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit video signals separated into three components: luminance (Y), chrominance blue (PB), and chrominance red (PR). Use a component video cable with three plugs. Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable. HDMI cable Digital optical cable Component video cable OPTICAL ❑ COAXIAL jacks • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m (16.4 ft) long to prevent signal quality degradation. Transmit digital audio signals. Use a digital coaxial cable. Digital coaxial cable • The unit’s HDMI jacks support the HDMI Control, Audio Return Channel (ARC), and 3D and 4K Ultra HD video transmission (through output) features. ❑ VIDEO jacks • Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos. Transmit analog video signals. Use a video pin cable. Video pin cable ❑ AUDIO jacks (Stereo L/R jacks) Transmit analog stereo audio signals. Use a stereo pin cable (RCA cable). Stereo pin cable (Stereo mini jack) Transmits analog stereo audio signals. Use a stereo mini-plug cable. Stereo mini-plug cable En 18 05_setup.fm Page 19 Wednesday, March 25, 2015 7:01 PM 1 2 3 4 5 6 7 8 9 10 3 Connecting a TV ■ Component (RX-V579) / composite video connection Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. When connecting any video device with a component video cable, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks. To maximize the performance of the unit, we recommend connecting a TV with an HDMI cable. When connecting any video device with a video pin cable, connect the TV to the MONITOR OUT (VIDEO) jack. ■ HDMI connection Connect the TV to the unit with an HDMI cable and a digital optical cable. • If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be output to the TV. The unit (rear) • Operations with TV screen are available only when your TV is connected to the unit via HDMI. HDMI input HDMI OUT jack HDMI OUT HDMI OUT HDMI 1 (BD/DVD) HDCP2.2 HDMI 2 HDMI 3 HDMI HDCP2.2 ARC • If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable connection between the TV and the unit. ARC HDMI HDMI AM PR ❑ COMPONENT VIDEO connection (RX-V579 only) PB Y COMPONENT VIDEO Connect the TV to the unit with a component video cable and a digital optical cable. VIDEO OPTICAL O OPTICAL COAXIAL COAXIAL AV 2 AV 3 ( TV ) AV 1 O Video input (component video) OPTICAL (TV) AV 4 AV 1 MONITOR OUT (COMPONENT VIDEO) jacks AV 5 (RX-V579) AV 1 (OPTICAL) jack (RX-V479) AUDIO 1 (OPTICAL) jack Audio output (digital optical) TV COMPONENT VIDEO COMPONENT VIDEO PR PR The unit (rear) PB • You do not make a digital optical cable connection between the TV and the unit in the following cases: HDMI OUT HDMI 1 HDCP2.2 (BD/DVD) Y – If your TV supports Audio Return Channel (ARC) ARC PR PR PB PB Y Y O O PB HDMI 5 HDMI 4 HDMI 3 HDMI 2 Y MONITOR OUT ANTENNA – If you will receive TV broadcasts only from the set-top box FM (RADIO) AM PR • If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s power and volume with the TV’s remote control. COMPONENT VIDEO PR PB 75 Ω PB VIDEO Y Y VIDEO COMPONENT VIDEO MONITOR OUT 1 OPTICAL To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the settings, see “Information on HDMI” (p.114). OPTICAL (TV) AV 1 COAXIAL COAXIAL AV 2 AV 3 OPTICAL AV 4 AV 5 AV 6 (TV) 2 SUBWOOFER PRE OUT AV 1 AV 1 (OPTICAL) jack About Audio Return Channel (ARC) • ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a single HDMI cable, you can output video/audio to the TV or input TV audio to the unit. • When using ARC, connect a TV with an HDMI cable that supports ARC. En 19 TV Audio output (digital optical) 00_RX-V479_V579_om_U.book Page 20 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ❑ VIDEO (composite video) connection Connect the TV to the unit with a video pin cable and a digital optical cable. MONITOR OUT (VIDEO) jack The unit (rear) HDMI OUT HDMI 1 HDCP2.2 (BD/DVD) HDMI 2 HDMI 3 Video input (composite video) VIDEO HDMI 5 HDMI 4 ARC V V ANTENNA FM (RADIO) COMPONENT AM VIDEO MONITOR OUT PR PR PB 75 Ω PB VIDEO Y Y VIDEO COMPONENT VIDEO MONITOR OUT 1 OPTICAL OPTICAL (TV) AV 1 COAXIAL COAXIAL AV 2 AV 3 AV 4 AV 5 AV 6 OPTICAL 2 SUBWOOFER PRE OUT O O (TV) AV 1 (RX-V579) AV 1 (OPTICAL) jack (RX-V479) AUDIO 1 (OPTICAL) jack TV Audio output (digital optical) En 20 00_RX-V479_V579_om_U.book Page 21 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 4 Connecting playback devices ■ Component video connection (RX-V579) The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect a BLUETOOTH device, an iPod, or a USB storage device, see the following pages. Connect a video device to the unit with a component video cable and an audio cable (digital optical or digital coaxial). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device. – Connecting a BLUETOOTH device (p.53) – Connecting an iPod (p.54) Output jacks on video device – Connecting a USB storage device (p.59) Input jacks on the unit Video Connecting video devices (such as BD/DVD players) Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the unit. Depending on the video/audio output jacks available on your video device, choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack. Audio Component video Digital optical AV 1 (COMPONENT VIDEO + OPTICAL) Digital coaxial AV 2 (COMPONENT VIDEO + COAXIAL) Analog Stereo You need to change the combination of video/audio input jacks (p.22). Video output (component video) • If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device (p.22). COMPONENT VIDEO AV 1-2 (COMPONENT VIDEO) jacks The unit (rear) ■ HDMI connection PR PR Connect a video device to the unit with an HDMI cable. HDMI OUT HDMI 1 HDCP2.2 (BD/DVD) ARC HDMI 2 PB HDMI 1–6 jacks AN FM HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5 (BD/DVD) PR HDMI 6 PR PB PB Y Y ( PB Y Y 75 Ω COMPONENT VIDEO HDCP2.2 PB The unit (rear) PR Y VIDEO COMPONENT VIDEO O O C C OPTICAL HDMI OUT HDMI 1 HDCP2.2 (BD/DVD) HDMI 3 HDMI 2 HDMI 5 HDMI 4 HDCP2.2 HDMI output HDMI ARC OPTICAL (TV) AV 1 (RADIO) AM COAXIAL AV 2 AV 3 OPTICAL ( TV ) AV 1 COAXIAL AV 2 AV 1 (OPTICAL) jack or AV 2 (COAXIAL) jack HDMI COMPONENT VIDEO PR PB 75 Ω PB COAXIAL COAXIAL ANTENNA FM PR Video device HDMI 6 HDMI VIDEO Audio output (digital optical or digital coaxial) Y Y VIDEO COMPONENT VIDEO MONITOR OUT 1 OPTICAL (TV) AV 1 COAXIAL COAXIAL AV 2 AV 3 AV 4 AV 5 AV 6 2 SUBWOOFER PRE OUT Video device • If you connect a video device to the unit via component video connection, you need to connect your TV to the MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.19). • If you connect a video device to the unit via HDMI, you need to connect your TV to the HDMI OUT jack of the unit (p.19). • For the HDCP 2.2-compatible HDMI device, use the HDMI 6 jack to connect it. En 21 00_RX-V479_V579_om_U.book Page 22 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ■ Composite video connection ■ Changing the combination of video/audio input jacks Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device. If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device. You can connect a video device that has the following video/audio output jacks. Output jacks on video device Output jacks on video device Input jacks on the unit Input jacks on the unit Video Audio Video Digital coaxial (RX-V579) AV 3 (VIDEO + COAXIAL) (RX-V479) AV 1 (VIDEO + COAXIAL) Analog stereo (RX-V579) AV 4–6 (VIDEO + AUDIO) (RX-V479) AV 2–4 (VIDEO + AUDIO) Digital optical You need to change the combination of video/audio input jacks (p.22). Composite video HDMI 1 (BD/DVD) HDMI 2 HDMI 4 HDMI 3 HD Audio HDMI 1–6 (RX-V579) AV 1 (OPTICAL) (RX-V479) AUDIO 1 (OPTICAL) Digital coaxial HDMI 1–6 (RX-V579) AV 2–3 (COAXIAL) (RX-V479) AUDIO 2 (COAXIAL) AV 1 (COAXIAL) Analog stereo HDMI 1–6 (RX-V579) AV 4–6 (AUDIO) (RX-V479) AV 2–4 (AUDIO) Component video (RX-V579 only) Analog stereo AV 1–2 (COMPONENT VIDEO) AV 4–6 (AUDIO) Composite video Digital optical (RX-V579) AV 3–6 (VIDEO) (RX-V479) AV 1–4 (VIDEO) (RX-V579) AV 1 (OPTICAL) (RX-V479) AUDIO 1 (OPTICAL) Digital optical HDMI VIDEO HDCP2.2 Video Video output (composite video) (RX-V579) AV 3–6 (VIDEO) jacks (RX-V479) AV 1–4 (VIDEO) jacks HDMI OUT Audio V V ARC VIDEO ANTENNA FM (RADIO) COMPONENT VIDEO PR AM PR Video device PB 75 Ω PB VIDEO Y Y VIDEO COMPONENT VIDEO MONITOR OUT C C COAXIAL OPTICAL (TV) AV 1 COAXIAL COAXIAL AV 2 AV 3 AV 4 AV 5 AV 6 L COAXIAL SUBWO PRE O L L L R R R The unit (rear) R (RX-V579) AV 3 (COAXIAL) jack or AV 4–6 (AUDIO) jacks (RX-V479) AV 1 (COAXIAL) jack or AV 2–4 (AUDIO) jacks Audio output (digital coaxial or analog stereo) • If you connect a video device to the unit via composite video connection, you need to connect your TV to the MONITOR OUT (VIDEO) jack of the unit (p.20). En 22 05_setup.fm Page 23 Monday, March 30, 2015 9:54 AM 1 2 3 4 5 6 7 8 9 10 ❑ Necessary setting 5 For example, if you have connected a video device to HDMI 2 and AV 6 (AUDIO) jack (“AV 4” on RX-V479) of the unit, change the combination setting as follows. Use the cursor keys (e/r) to select “AV 6” (“AV 4” on RX-V479) (audio input jack to be used). ENHANCER STEREO TUNED CHARGE HDMI 2 jack The unit (rear) HDMI 1 Audio••••••AV6 HDMI output ADAPTIVE DRC VIRTUAL HDMI 3 HDMI 2 (BD/DVD) HDCP2.2 VOL. ECO HDMI 2 HDMI OUT SLEEP MUTE OUT HDMI HDMI HDMI 6 ARC ANTENNA FM (RADIO) AM Press OPTION. PR This completes the necessary settings. 75 Ω PB If you select “HDMI 2” as the input source by pressing INPUT, the video/audio played back on the video device will be output from the unit. Y VIDEO COMPONENT VIDEO AUDIO OPTICAL (TV) AV 1 COAXIAL COAXIAL AV 2 AV 3 AV 4 AV 5 L L L R R R Video device AV 6 Connecting audio devices (such as CD players) AV 6 (RX-V579) AV 6 (AUDIO) jack (RX-V479) AV 4 (AUDIO) jack 1 Connect audio devices such as CD players and MD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. Audio output (analog stereo) After connecting external devices (such as a TV and playback devices) and power cable of the unit, turn on the unit. 2 Press INPUT to select “HDMI 2” (video input jack to be used) as the input source. 3 Press OPTION. Audio output jacks on audio device Audio input jacks on the unit Digital optical (RX-V579) AV 1 (OPTICAL) (RX-V479) AUDIO 1 (OPTICAL) Digital coaxial (RX-V579) AV 2–3 (COAXIAL) (RX-V479) AUDIO 2 (COAXIAL) AV 1 (COAXIAL) Analog stereo (RX-V579) AV 4–6 (AUDIO) (RX-V479) AV 2–4 (AUDIO) BLUETOOTH MUTE OPTION SETUPP OPTION ENTER RETURN TOP MENU 4 Cursor Cursor keys keys ENTER DISPLAY A HOME POP UP/MENU Use the cursor keys (q/w) to select “Audio In” and press ENTER. CHARGE ENHANCER STEREO TUNED OUT SLEEP MUTE VOL. ECO Audio In ADAPTIVE DRC VIRTUAL En 23 00_RX-V479_V579_om_U.book Page 24 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 5 Connecting the FM/AM antennas The unit (rear) HDMI OUT HDMI 1 HDCP2.2 (BD/DVD) HDMI 2 HDMI 4 HDMI 3 Connect the supplied FM/AM antennas to the unit. HDMI 5 O ARC O OPTICAL Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface. OPTICAL ANTENNA FM (RADIO) COMPONENT VIDEO PR AM PR C PB 75 Ω C FM antenna COAXIAL VIDEO PB L Y VIDEO COMPONENT VIDEO COAXIAL L Y 1 L L 2 SUBWOOFER PRE OUT R R R R OPTICAL (TV) AV 1 COAXIAL COAXIAL AV 2 AV 3 AV 4 AV 5 AM antenna Audio device MONITOR OUT AV 6 Audio output (either digital optical, digital coaxial, or analog stereo) (RX-V579) AV 1-6 jacks (RX-V479) AUDIO 1-2 jacks AV 1-4 jacks HDMI OUT HDMI 1 HDCP2.2 (BD/DVD) HDMI 2 HDMI 4 HDMI 3 (RADIO) AM (NET) PB PB Connecting to the jack on the front panel VIDEO C MONITOR OUT 1 OPTICAL (TV) AV 1 SCENE COAXIAL COAXIAL AV 2 AV 3 AV 4 AV 5 AV 6 2 SUBWOOFER PRE OUT The unit (rear) Assembling and connecting the AM antenna NET PROGRAM FRONT Y Y Before making a connection, stop playback on the device and turn down the volume on the unit. TV VIDEO COMPONENT VIDEO Use the AUX jack on the front panel to temporarily connect devices such as portable audio players to the unit. TONE CONTROL NETWORK HDCP2.2 COMPONENT VIDEO PR 75 Ω INPUT HDMI 6 ANTENNA FM PR BD DVD HDMI 5 ARC RADIO STRAIGHT AUX (CONNECT) AUDIO 5V 1A The unit (front) Portable audio player Hold down Insert If you select “AUX” as the input source by pressing INPUT, the audio played back on the device will be output from the unit. • You need to prepare the audio cable that matches the output jacks on your device. • Unwind only the length of cable needed from the AM antenna unit. • The wires of the AM antenna have no polarity. • For details on how to connect an USB storage device, see “Connecting a USB storage device” (p.59). En 24 Release 00_RX-V479_V579_om_U.book Page 25 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 6 Preparing for connecting to a network Connect the unit to a router (access point) with a network cable, or prepare the wireless antenna for establishing a wireless network connection. • Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the unit to the network devices or the Internet. In these cases, configure the security software or firewall settings appropriately. You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. • Each server must be connected to the same subnet as the unit. • To use the service via the Internet, broadband connection is strongly recommended. Connecting a network cable Preparing a wireless antenna Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). If you connect the unit wirelessly, erect the wireless antenna. Network Attached Storage (NAS) Internet For information on how to connect the unit to a wireless network, see “Connecting to a network wirelessly” (p.32). WAN Erect the wireless antenna. PC LAN Modem LESS WIRE Wireless router Network cable HDMI OUT HDMI 1 HDCP2.2 (BD/DVD) HDMI 4 HDMI 3 HDMI 2 HDMI 5 HDMI 6 NETWORK HDCP2.2 (NET) ARC ANTENNA FM HDMI OUT (RADIO) AM ARC PR 75 Ω HDMI 1 • Do not apply excessive force on the wireless antenna. Doing so may damage the antenna. HDMI 6 (BD/DVD) COMPONENT VIDEO PR PB ANTENNA The unit (rear) • If you are using a router that supports DHCP, you do not need to configure any network settings for the unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters manually (p.92). • You can check whether the network parameters (such as IP address) are properly assigned to the unit in “Information” (p.92) in the “Setup” menu. En 25 00_RX-V479_V579_om_U.book Page 26 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 7 Connecting the power cable Before connecting the power cable (Taiwan and General models only) Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–120/220–240 V, 50/60 Hz. • Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential fire hazard. The unit (rear) W SS VOLTAGE SELECTOR SPEAKERS SURROUND BACK/BI AMP /ZONE B CENTER SURROUND SINGLE VOLTAGE SELECTOR 110V 120V 220V 240V After all the connections are complete, plug in the power cable. The unit (rear) W SS To an AC wall outlet SPEAKERS SURROUND BACK/BI AMP /ZONE B CENTER SURROUND SINGLE En 26 00_RX-V479_V579_om_U.book Page 27 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 8 Selecting an on-screen menu language ZONE A ZONE B z SLEEP Select the desired on-screen menu language. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS 1 2 PROGRAM Press z (receiver power) to turn on the unit. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). FM/AM USB INPUT • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. VOLUME NET • If you turn on the unit for the first time, the message regarding the network setup appears. To continue the language setup, press RETURN. BLUETOOTH MUTE SETUP SETUP OOPTION PTION ENTER RETURN TOP MENU RED Cursor keys ENTER 3 4 Press SETUP. Use the cursor keys to select “Language” and press ENTER. DISPLAY A HOME GREEN YELLOW L POP-UP/MENU Setup RETURN Speaker English HDMI 日本語 Français Deutsch Español Русский Italiano Sound BLUE ECO MEMORY Function Network TUNING Bluetooth TUNING Language 中文 PRESET 5 Use the cursor keys to select the desired language. Setup Speaker English HDMI 日本語 Français Deutsch Español Русский Italiano Sound ECO Function Network Bluetooth Language 中文 En 27 6 To exit from the menu, press SETUP. • The information on the front display is provided in English only. 00_RX-V479_V579_om_U.book Page 28 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 9 Optimizing the speaker settings automatically (YPAO) ZONE A ZONE B z SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM FM/AM USB INPUT VOLUME NET The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. • When you use the front 5.1-channel speaker (Virtual CINEMA FRONT) configuration (p.13), set “Virtual CINEMA FRONT” (p.82) in the “Setup” menu to “On” beforehand. 4 Place the YPAO microphone at your listening position and connect it to the YPAO MIC jack on the front panel. • Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand. You can use the tripod screws to stabilize the microphone. The unit (front) • Please note the following when using YPAO. – Use YPAO after connecting a TV and speakers to the unit. BLUETOOTH MUTE – During the measuring process, test tones are output at high volume. Ensure that the test tones do not frighten small children. – During the measuring process, you cannot adjust the volume. SETUPP OOPTION PTION – During the measuring process, keep the room as quiet as possible. 1 – Do not connect headphones. ENTER – Do not stand between the speakers and the YPAO microphone during the measurement process (about 3 minutes). RETURN TOP MENU RED DISPLAY A HOME GREEN YELLOW L POP-UP/MENU BLUE 1 2 MEMORY TUNING 9 2 3 Press z (receiver power) to turn on the unit. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). 4 5 TUNING • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. PRESET 3 Turn on the subwoofer and set the volume to half. If the crossover frequency is adjustable, set it to maximum. VOLUME CROSSOVER/ HIGH CUT Ear height The following screen appears on the TV. Auto Setup 9 Start Exit MIN MAX MIN Press SETUP key to Start MAX Power Amp Assign Basic • (RX-V579 only) If you are using bi-amp connection or Zone B speakers, set “Power AMP Assign” (p.80) in the “Setup” menu to the appropriate setting before starting YPAO. En 28 “Power AMP Assign” setting (p.80) (RX-V579 only) 00_RX-V479_V579_om_U.book Page 29 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ZONE A 5 ZONE B SLEEP TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Use the cursor keys (e/r) to select “SAVE” and press ENTER. Auto Setup Measurement Finished Start Exit PROGRAM SAVE Result 3 / 2 / 0.1 ch • To stop the measurement temporarily, press RETURN and follow the procedure in “Error messages” (p.30). 3.0 / 10.5 m -3.0 / +10.0 dB The following screen appears on the TV when the measurement finishes. FM/AM USB INPUT 6 The measurement will start in 10 seconds. Press ENTER to start the measurement immediately. SCENE BD DVD To start the measurement, use the cursor keys to select “Start” and press SETUP. VOLUME NET Auto Setup BLUETOOTH Start MUTE Exit SETUP The adjusted speaker settings are applied. Measurement Finished 1 Result 3 / 2 / 0.1 ch 2 3.0 / 10.5 m SETUP -3.0 / +10.0 dB OOPTION PTION 3 OK:ENTER Cursor Cursor keys keys ENTER ENTER RETURN TOP MENU RED DISPLAY A HOME GREEN YELLOW L POP-UP/MENU BLUE MEMORY TUNING TUNING RETURN 4 • To finish the measurement without saving the result, select “CANCEL”. 7 Disconnect the YPAO microphone from the unit. This completes optimization of the speaker settings. 1 The number of speakers (front side/rear side/subwoofer) Caution 2 Speaker distance (nearest/farthest) • The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). 3 Adjustment range of speaker output level 4 Warning message (if available) PRESET • If any error message (such as E-1) or warning message (such as W-1) appears, see “Error messages” (p.30) or “Warning messages” (p.31). • A speaker with a problem is indicated by blinking of the speaker indicators in the front display. • If multiple warnings are given (when operating with the front display), use the cursor keys (q/w) to check the other warning messages. En 29 00_RX-V479_V579_om_U.book Page 30 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Auto Setup ERROR E-5:Noisy Start Error message Exit PROCEED 5% TV screen ENHANCER STEREO TUNED CHARGE OUT E-5:NOISY ADAPTIVE DRC VIRTUAL Front display ■ Procedure to handle errors 1 2 Cause Remedy E-1:No Front SP (E-1:NO FRNT SP) Front speakers are not detected. E-2:No Sur. SP (E-2:NO SUR SP) One of the surround speakers cannot be detected. E-4:SBR → SBL (E-4:SBR → SBL) A surround back speaker is connected to the R side only. When using only one surround back speaker, you need to connect it to the SINGLE jack (L side). Exit YPAO, turn off the unit, and then reconnect the speaker. E-5:Noisy (E-5:NOISY) The noise is too loud. Keep the room quiet and retry YPAO. If you select “PROCEED”, YPAO takes the measurement again and ignores any noise detected. E-6:Check Sur. (E-6:CHECK SUR) Surround back speakers are connected, but no surround speakers are connected. Surround speakers need to be connected in order to use surround back speakers. Exit YPAO, turn off the unit, and then reconnect the speakers. E-7:No MIC (E-7:NO MIC) The YPAO microphone has been removed. Connect the YPAO microphone to the YPAO MIC jack firmly and retry YPAO. E-8:No Signal (E-8:NO SIGNAL) The YPAO microphone cannot detect test tones. Connect the YPAO microphone to the YPAO MIC jack firmly and retry YPAO. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service center. E-9:User Cancel (E-9:CANCEL) The measurement has been canceled. Retry or exit YPAO as necessary. E-10:Internal Err. (E-10:INTERNAL) An internal error has occurred. Exit YPAO, and turn off and on the unit. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service center. Exit YPAO, turn off the unit, and then check the speaker connections. SLEEP MUTE VOL. ECO Error message Check the content of error message and press ENTER. Use the cursor keys (e/r) to select the desired operation. To exit the YPAO measurement: a Select “EXIT” and press ENTER. b Use the cursor keys (q/w) to select “Exit” and press ENTER. • Texts in parentheses denote indicators on the front display. c Disconnect the YPAO microphone from the unit. To retry the YPAO measurement from beginning: Select “RETRY” and press ENTER. To proceed with the current YPAO measurement (for E-5 and E-9 only): Select “PROCEED” and press ENTER. En 30 00_RX-V479_V579_om_U.book Page 31 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. Warning message Auto Setup Start 3 / 2 / 0.1 ch 3.0 / 10.5 m -3.0 / +10.0 dB OK:ENTER TV screen Problem speaker (blinks) ENHANCER STEREO TUNED A speaker cable may be connected with the reverse polarity (+/-). W-2:Over Distance (W-2:DISTANCE) A speaker is placed more than 24 m (80 ft) from the listening position. Exit YPAO, turn off the unit, and place the problem speaker within 24 m (80 ft) of the listening position. There are significant volume differences between the speakers. Check the usage environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. If there is any problem, exit YPAO, turn off the unit, and then reconnect speaker cable or correct the speaker positions. We recommend using the same speakers or speakers with specifications that are as similar as possible. SLEEP MUTE VOL. ECO W-1:PHASE ADAPTIVE DRC VIRTUAL W-3:Level Error (W-3:LEVEL) Front display ■ Procedure to handle warnings • Texts in parentheses denote indicators on the front display. 1 Check the content of warning message and press ENTER. 2 Use the cursor keys (e/r) to select the desired operation. To save the measurement results: Select “SAVE” and press ENTER. To discard the measurement result: Select “CANCEL” and press ENTER. 3 If the speaker is connected incorrectly: Turn off the unit, reconnect the speaker cable. W-1:Out of Phase (W-1:PHASE) Warning message W-1:Out of Phase OUT Remedy Check the cable connections (+/-) of the problem speaker. Result Exit CHARGE Cause Measurement Finished Disconnect the YPAO microphone from the unit. En 31 If the speaker is connected correctly: Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. In this case, you can ignore the message. 00_RX-V479_V579_om_U.book Page 32 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 10 Connecting to a network wirelessly ■ Connecting without a wireless router (access point) Connect the unit to a wireless router (access point) or a mobile device by establishing a wireless connection. Connect a mobile device to the unit directly. You can use the application for smartphone / tablet “AV CONTROLLER” (p.6) to control the unit from mobiles devices or enjoy music files stored on mobiles devices on the unit. • When you connect the unit to a router with a network cable, you need not do this procedure. Selecting the connection method Select a connection method according to your network environment. ■ Connecting with a wireless router (access point) Mobile device (such as iPhone) Connect the unit to a wireless router (access point). You can enjoy Internet radio, AirPlay, or music files stored on media servers (PC/NAS) on the unit. The unit For details on connection, see “Connecting a mobile device to the unit directly (Wireless Direct)” (p.40). You can also use the application for smartphone / tablet “AV CONTROLLER” (p.6) to control the unit from mobiles devices or enjoy music files stored on mobiles devices on the unit. • You cannot use Wireless Direct simultaneously with the wired LAN connection (p.25) or the wireless LAN connection (p.33). Internet • When Wireless Direct is enabled, the unit cannot connect to the Internet. Therefore, you cannot use any kind of Internet service such as Internet radio. Wireless router • Also the mobile device cannot connect to the Internet, so we recommend you disconnect the mobile device from the unit. Modem Mobile device (such as iPhone) The unit For details on connection, see “Connecting the unit to a wireless network” (p.33). • You cannot use the wireless LAN connection simultaneously with the wired LAN connection (p.25) or Wireless Direct (p.40). • If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless router (access point). In such case, place them close to each other. En 32 00_RX-V479_V579_om_U.book Page 33 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 Connecting the unit to a wireless network ZONE A ZONE B z SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS 6 There are several methods to connect the unit to a wireless network. Select a connection method according to your environment. Use the cursor keys (e/r) to select “Wireless (Wi-Fi)” and press ENTER. Network Connection Connection Do you own iOS devices (iPhone/iPod touch)? PROGRAM Yes A (p.33) No FM/AM Wireless (Wi-Fi) OK:ENTER Back:RETURN USB INPUT Does your wireless router (access point) has a WPS button? VOLUME NET BLUETOOTH MUTE RETURN TOP MENU RED Cursor Cursor keys keys ENTER DISPLAY A HOME GREEN YELLOW L POP-UP/MENU BLUE • The unit may connect automatically to the access point to which it has connected previously. In this case, the message indicating the successful connection will appear. You can ignore this message and proceed to the next step. C (p.36) OOPTION PTION ENTER B (p.35) No SETUP SETUP Yes ■ A: Sharing the iOS device setting You can easily setup a wireless connection by applying the connection settings on iOS devices (iPhone/iPod touch). Before proceeding, confirm that your iOS device is connected to a wireless router. MEMORY TUNING TUNING PRESET 1 2 5 Use the cursor keys (q/w) to select “Share Wi-Fi Settings(iOS)” and press ENTER. Wireless (Wi-Fi) Select a setup method. WPS Button Share Wi-Fi Settings(iOS) Access Point Scan Manual Setting PIN Code Press z (receiver power) to turn on the unit. OK:ENTER Back:RETURN Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). • Operations with TV screen are available only when your TV is connected to the unit via HDMI. 3 4 7 Press SETUP. Use the cursor keys (q/w) to select “Network” and press ENTER. Use the cursor keys (q/w) to select “Network Connection” and press ENTER. En 33 00_RX-V479_V579_om_U.book Page 34 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ZONE A 8 ZONE B SLEEP Use the cursor keys (q/w) and ENTER to select the desired connection method. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Share Wi-Fi Settings ❑ Sharing the iOS device setting wirelessly If you select “Wireless (WAC)” as the connection method, perform the network setting sharing operation on your iOS device. (The following procedure is a setup example for iOS 8.) 1 Select method for sharing setting with iOS device. Wireless (WAC) USB Cable PROGRAM On the iOS device, select the unit as the AirPlay speaker in the Wi-Fi screen. iOS (example of English version) FM/AM OK:ENTER Back:RETURN USB INPUT VOLUME NET The following connection methods are available. BLUETOOTH MUTE SETUPP ENTER RETURN TOP MENU Wireless (WAC) OOPTION PTION Cursor keys keys Cursor ENTER USB Cable DISPLAY A HOME POP-UP/MENU You can apply the connection settings on the iOS device to the unit using a wireless connection. For details, see “Sharing the iOS device setting wirelessly”. (You need iOS device with iOS 7 or later.) You can apply the connection settings on the iOS device to the unit using a USB cable. For details, see “Sharing the iOS device setting using a USB cable”. (You need iOS device with iOS 5 or later.) The name of the unit 2 Select the network (access point) of which you want to share the settings with the unit. iOS (example of English version) Tap here to start setup RED GREEN YELLOW L BLUE MEMORY TUNING • When you use wired network connection, Wireless (WAC) is not available. TUNING PRESET 9 Read the on-screen description and press ENTER. The network currently selected When the sharing process finishes, the unit is automatically connected to the selected network (access point). En 34 05_setup.fm Page 35 Wednesday, March 25, 2015 7:00 PM 1 2 3 4 5 6 7 8 9 10 ZONE A ZONE B z SLEEP S CENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS ❑ Sharing the iOS device setting using a USB cable ■ B: Using the WPS button configuration If you select “USB Cable” as the connection method, follow the procedure below to share the iOS device setting with the unit. You can easily set up a wireless connection with one push of the WPS button. 1 1 2 PROGRAM The unit (front) FM/AM AUDIO 5V 1A VOLUME 3 NET BLUETOOTH MUTE OOPTION PTION ENTER RETURN TOP MENU RED ENTER 2 3 DISPLAY A HOME GREEN YELLOW O POP-UP/MENU BLUE MEMORY TUNING Hold down INFO (WPS) on the front panel for 3 seconds. Push the WPS button on the wireless router (access point). When the connection process finishes, “Completed” appears on the front display. SETUP SETUP Press z (receiver power) to turn on the unit. “Press WPS button on Access Point” appears on the front display. AUX USB INPUT Connect the iOS device to the USB jack, and disable the screen lock on the iOS device. If “Not connected” appears, repeat from step 1 or try another connection method. Press ENTER on the remote control. Tap “Allow” in the message appeared on the iOS device. When the connection process finishes, “Completed” appears on the TV screen. 4 To exit from the menu, press SETUP. • Depending on the model of the wireless router (access point), the unit may not connect to it. In this case, try connection with “Access Point Scan” or “Manual Setting” (p.36). • You can use “WPS Button” (p.36) in the “Setup” menu to set up a wireless connection with the WPS button. TUNING About WPS PRESET WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy establishment of a wireless home network. En 35 00_RX-V479_V579_om_U.book Page 36 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ■ C: Using other connection methods ZONE A ZONE B z SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS If your wireless router (access point) does not support WPS button configuration method, follow the procedure below to configure the wireless network settings. 1 2 PROGRAM FM/AM 7 Use the cursor keys (q/w) to select the desired connection method and press ENTER. Wireless (Wi-Fi) Press z (receiver power) to turn on the unit. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). Select a setup method. WPS Button Share Wi-Fi Settings(iOS) Access Point Scan Manual Setting PIN Code OK:ENTER Back:RETURN USB INPUT VOLUME • Operations with TV screen are available only when your TV is connected to the unit via HDMI. NET BLUETOOTH MUTE SETUP SETUP OOPTION PTION ENTER RETURN TOP MENU RED Cursor keys ENTER DISPLAY A HOME GREEN YELLOW L 3 4 Press SETUP. The following connection methods are available. WPS Button Use the cursor keys (q/w) to select “Network” and press ENTER. You can set up a wireless connection with the WPS button while viewing the TV screen. Follow the instructions displayed on the TV screen. Share Wi-Fi Settings(iOS) See “Sharing the iOS device setting” (p.33). 5 Use the cursor keys (q/w) to select “Network Connection” and press ENTER. Access Point Scan You can set up a wireless connection by searching for an access point. For details on settings, see “Searching for an access point” (p.37). 6 Use the cursor keys (e/r) to select “Wireless (Wi-Fi)” and press ENTER. Manual Setting You can setup a wireless connection by entering the required information (such as SSID) manually. For details on settings, see “Setting up the wireless connection manually” (p.38). PIN Code You can set up a wireless connection by entering the unit’s PIN code into the wireless router (access point). The method is available if the wireless router (access point) supports the WPS PIN code method. For details on settings, see “Using the WPS PIN code” (p.39). POP-UP/MENU BLUE MEMORY TUNING TUNING Network Connection Connection Wireless (Wi-Fi) PRESET OK:ENTER Back:RETURN • The unit may connect automatically to the access point to which it has connected previously. In this case, the message indicating the successful connection will appear. You can ignore this message and proceed to the next step. En 36 00_RX-V479_V579_om_U.book Page 37 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ❑ Searching for an access point ZONE A If you select “Access Point Scan” as the connection method, the unit starts searching for access points. After a while, the list of available access points appears on the TV screen. ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS 1 PROGRAM FM/AM Access Point Scan USB VOLUME NET SSID: Access Point X Security: WPA-PSK (AES) Security Key: BLUETOOTH Connect MUTE SETUP SETUP ENTER RETURN TOP MENU RED Edit:ENTER CANCEL:RETURN OOPTION PTION Cursor Cursor keys keys ENTER DISPLAY A HOME GREEN YELLOW L POP-UP/MENU Use the cursor keys and ENTER to enter the security key. Network Connection TUNING PRESET Press ENTER. BLUE MEMORY TUNING 2 3 abc_ ( . 0 ← a n ) , 1 A b o [ ] { } < > * ! : ; _ | / \ $ 2 3 4 5 6 7 8 a B K S P S p a c e c d e f g h i p q r s t u v ? # % & ~ ^ ´ ’ ` 9 + - = D E L → j k l m w x y z OK CANCEL CLEAR Button functions [←]/[→]: Moves the cursor left and right. [Aa]: Switches the letter cases (upper/lower). [BKSP]: Deletes the character to the left of the selected one. [Space]: Enters a space. [DEL]: Deletes the selected character. When finished entering the key, select “OK” to return to the previous screen. En 37 Use the cursor keys (q/w) to select “Connect” and press ENTER to start the connection process. When the connection process finishes, “Completed” appears on the TV screen. Use the cursor keys (q/w) to select the desired access point and press ENTER. The wireless connection setting screen appears on the TV. INPUT 4 If “Not connected” appears, repeat from step 1 or try another connection method. 5 To exit from the menu, press SETUP. 00_RX-V479_V579_om_U.book Page 38 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ❑ Setting up the wireless connection manually ZONE A If you select “Manual Setting” as the connection method, the wireless connection setting screen appears on the TV. ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS You need to setup the SSID (network name), encryption method and security key for your network. PROGRAM 4 SSID: Access Point X Security: None • If you select “None” in step 3, this item is not available. Security Key: 5 Connect USB VOLUME NET Edit:ENTER CANCEL:RETURN MUTE SETUP OOPTION PTION Cursor Cursor keys keys ENTER ENTER RETURN TOP MENU 1 Use the cursor keys (q/w) to select “SSID” and press ENTER. 2 Use the cursor keys and ENTER to enter the SSID of the access point. DISPLAY A HOME If you select the method other than “WEP” in step 3, enter either 8 to 63 character string, or 64 hexadecimal digits. Network Connection **** ( . 0 ← a n POP-UP/MENU Network Connection RED GREEN YELLOW L BLUE TUNING ( . 0 ← a n TUNING ) , 1 A b o [ ] { } < > * ! : ; _ | / \ $ 2 3 4 5 6 7 8 a B K S P S p a c e c d e f g h i p q r s t u v ? # % & ~ ^ ´ ’ ` 9 + - = D E L → j k l m w x y z 6 When finished entering the key, select “OK” to return to the previous screen. 3 [ ] { } < > * ! : ; _ | / \ $ 2 3 4 5 6 7 8 a B K S P S p a c e c d e f g h i p q r s t u v ? # % & ~ ^ ´ ’ ` 9 + - = D E L → j k l m w x y z When finished entering the key, select “OK” to return to the previous screen. OK CANCEL CLEAR PRESET ) , 1 A b o OK CANCEL CLEAR **** MEMORY Use the cursor keys and ENTER to enter the security key. If you select “WEP” in step 3, enter either 5 or 13 character string, or 10 or 26 hexadecimal digits. BLUETOOTH SETUP Use the cursor keys (q/w) to select “Security Key” and press ENTER. Manual Setting FM/AM INPUT • If you select “None”, the connection may be insecure since the communication is not encrypted. Use the cursor keys (q/w) to select “Security” and the cursor keys (e/r) to select the encryption method. Choices None, WEP, WPA-PSK (AES), Mixed Mode En 38 Use the cursor keys (q/w) to select “Connect” and press ENTER to start the connection process. When the connection process finishes, “Completed” appears on the TV screen. If “Not connected” appears, check that all the information is entered correctly, and repeat from step 1. 7 To exit from the menu, press SETUP. 00_RX-V479_V579_om_U.book Page 39 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ❑ Using the WPS PIN code ZONE A If you select “PIN Code” as the connection method, the list of available access points appears on the TV screen. ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS 1 Use the cursor keys (q/w) to select the desired access point and press ENTER. The PIN code of the unit appears on the TV screen. PROGRAM FM/AM PIN Code P I N C od e : 00000000 USB INPUT VOLUME Enter the PIN code into the access point. NET BLUETOOTH MUTE OK:ENTER Back:RETURN SETUP SETUP OOPTION PTION Cursor Cursor keys keys ENTER ENTER RETURN TOP MENU RED 2 DISPLAY A HOME GREEN YELLOW L For details on settings, refer to the instruction manual of the wireless router (access point). POP-UP/MENU BLUE 3 MEMORY TUNING Enter the unit’s PIN code into the wireless router (access point). Press ENTER to start the connection process. When the connection process finishes, “Completed” appears on the TV screen. TUNING If “Not connected” appears, repeat from step 1 or try another connection method. PRESET 4 To exit from the menu, press SETUP. En 39 00_RX-V479_V579_om_U.book Page 40 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ZONE A ZONE B z SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Connecting a mobile device to the unit directly (Wireless Direct) 7 Follow the procedure below to connect a mobile device to the unit directly. Use the cursor keys (q/w) to select “Security” and the cursor keys (e/r) to select the encryption method. Choices None, WPA2-PSK (AES) PROGRAM • Wireless Direct connection may be insecure since the communication is not strongly encrypted. The unit may operate by playback operation on wireless devices connected to the unit without permission. FM/AM 1 2 USB INPUT VOLUME NET BLUETOOTH MUTE Press z (receiver power) to turn on the unit. • If you select “None”, the connection may be insecure since the communication is not encrypted. 8 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). SETUP SETUP RETURN TOP MENU RED • If you select “None” in step 7, this item is not available. OOPTION PTION Cursor Cursor keys keys ENTER ENTER DISPLAY A HOME GREEN YELLOW L POP-UP/MENU TUNING • Operations with TV screen are available only when your TV is connected to the unit via HDMI. 3 4 PRESET Use the cursor keys (q/w) to select “Network” and press ENTER. Use the cursor keys and ENTER to enter the security key. Network Connection abc_ 5 Use the cursor keys (q/w) to select “Network Connection” and press ENTER. 6 Use the cursor keys (e/r) to select “Wireless Direct” and press ENTER. TUNING 9 Enter either 8 to 63 character string, or 64 hexadecimal digits. Press SETUP. BLUE MEMORY Use the cursor keys (q/w) to select “Security Key” and press ENTER. ) , 1 A b o [ ] { } < > * ! : ; _ | / \ $ 2 3 4 5 6 7 8 a B K S P S p a c e c d e f g h i p q r s t u v ? # % & ~ ^ ´ ’ ` 9 + - = D E L → j k l m w x y z OK CANCEL CLEAR When finished entering the key, select “OK” to return to the previous screen. Network Connection Connection ( . 0 ← a n Wireless Direct • Before proceeding to the next step, record the following information. These information will be needed to configure the Wi-Fi setting of a mobile device. – SSID displayed on the TV screen OK:ENTER Back:RETURN – Security key you have just entered En 40 00_RX-V479_V579_om_U.book Page 41 Wednesday, March 25, 2015 9:59 AM 1 2 3 4 5 6 7 8 9 10 ZONE A 10 Use the cursor keys (q/w) to select “Save” and press ENTER to save the setting. ZONE B SLEEP This completes the settings and “Completed” appears on the TV screen. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Next, configure the Wi-Fi settings of a mobile device. PROGRAM 11 Configure the Wi-Fi settings of a mobile device. For details on settings of your mobile device, refer to the instruction manual of the mobile device. FM/AM USB INPUT a Enable the Wi-Fi function on the mobile device. VOLUME NET b Select the SSID displayed in step 9 from the list of available access points. BLUETOOTH MUTE SETUP SETUP OOPTION PTION Cursor Cursor keys keys ENTER ENTER RETURN TOP MENU RED c When you are prompted for a password, enter the security key displayed in step 9. 12 To exit from the menu, press SETUP. DISPLAY A HOME GREEN YELLOW L POP-UP/MENU BLUE MEMORY TUNING TUNING PRESET En 41 00_RX-V479_V579_om_U.book Page 42 Wednesday, March 25, 2015 9:59 AM ZONE A PLAYBACK ZONE B SLEEP Basic playback procedure SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM Input Input selection selection keys keys FM/AM 1 Turn on the external devices (such as a TV or BD/DVD player) connected to the unit. 2 Use the input selection keys to select an input source. 3 Start playback on the external device or select a radio station. USB INPUT VOLUME VOLUME NET BLUETOOTH MUTE MUTE Refer to the instruction manual for the external device. SETUPP OOPTION PTION For details on the following operations, see the corresponding pages. ENTER • Listening to FM/AM radio (p.49) RETURN TOP MENU RED • Playing back iPod music (p.54) DISPLAY A HOME GREEN YELLOW L • Playing back music via BLUETOOTH (p.53) POP-UP/MENU • Playing back music stored on a USB storage device (p.59) BLUE MEMORY TUNING • Playing back music stored on media servers (PCs/NAS) (p.62) TUNING • Listening to Internet radio (p.65) PRESET • Playing back music with AirPlay (p.57) 4 Press VOLUME to adjust the volume. • To mute the audio output, press MUTE. Press MUTE again to unmute. • To adjust the treble/bass settings, use the “Option” menu or TONE CONTROL on the front panel (p.73). En 42 00_RX-V479_V579_om_U.book Page 43 Wednesday, March 25, 2015 9:59 AM Selecting the input source and favorite settings with one touch (SCENE) ZONE A ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM The SCENE function allows you to select the assigned input source, sound program, Compressed Music Enhancer on/off, and target zones (RX-V579 only) with just one touch. 1 USB VOLUME NET BLUETOOTH 1 • Select a sound program (p.44) Press SCENE. • Enable/disable Compressed Music Enhancer (p.48) The input source and settings registered to the corresponding scene are selected. The unit turns on automatically when it is in standby mode. By default, the following settings are registered for each scene. OOPTION PTION SCENE ENTER Perform the following operations to prepare the settings you want to assign to a scene. • Select an input source (p.42) MUTE SETUPP Configuring scene assignments Selecting a registered scene FM/AM INPUT SCENE • (RX-V579 only) Enable/disable the audio output to Zone A/B (p.69) 2 Hold down the desired SCENE key until “SET Complete” appears on the front display. CHARGE ENHANCER STEREO TUNED SLEEP MUTE OUT VOL. ECO RETURN TOP MENU RED DISPLAY A HOME GREEN YELLOW L BLUE TUNING PRESET NET RADIO Sound program Sci-Fi STRAIGHT 7ch Stereo 7ch Stereo [5ch Stereo] [5ch Stereo] Compressed Off Music Enhancer On On On SCENE link playback On On Off Off Target zone (RX-V579 only) Zone A Zone A Zone A Zone A Input HDMI 1 POP-UP/MENU MEMORY TUNING AV 1 [AUDIO 1] TUNER Texts in brackets shows default settings for RX-V479. • The SCENE link playback function allows you to automatically turn on the TV or start playback of an external device connected to the unit via HDMI, in conjunction with a scene selection. To enable SCENE link playback, set “SCENE” (p.85) in the “Setup” menu to “On”. En 43 SET Complete ADAPTIVE DRC VIRTUAL 00_RX-V479_V579_om_U.book Page 44 Wednesday, March 25, 2015 9:59 AM Selecting the sound mode ZONE A ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM STRAIGHT DIRECT ENHANCER BASS PROGRAM FM/AM ❑ I want to enjoy viewing video sources such as movies, TV programs, or games. • Select a sound program suitable for each video source by pressing PROGRAM repeatedly (p.45). USB INPUT The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). VOLUME NET ❑ I want to enjoy listening to music sources or stereo playback. BLUETOOTH MUTE SETUPP OPTION ENTER RETURN TOP MENU RED DISPLAY A HOME GREEN YELLOW L POP-UP/MENU • Select a sound program suitable for music or stereo playback by pressing PROGRAM repeatedly (p.46). ❑ I want to enjoy multichannel playback from 2-channel sources. • Select a surround decoder in the “Option” menu (p.72). BLUE ❑ I want to enjoy unprocessed sounds in original channels. TUNING • Switch to the straight decode mode by pressing STRAIGHT (p.47). MEMORY TUNING OPTION PRESET ❑ I want to enjoy pure high fidelity sounds. • Enable the direct playback mode by pressing DIRECT (p.48). This mode reduces the electrical noise from other circuitry to allow you to enjoy Hi-Fi sound quality. ❑ I want to enjoy enhanced bass sounds. • Enable Extra Bass by pressing BASS (p.48). En 44 ❑ I want to enjoy listening to compressed music. • Enable Compressed Music Enhancer by pressing ENHANCER (p.48). This mode lets you enjoy compressed music stored on a BLUETOOTH device or USB storage device with additional depth and breadth (p.48). • The sound mode can be applied separately to each input source. • When you play back audio signals with a sampling rate of higher than 96 kHz, the straight decode mode (p.47) is automatically selected. • You can check which speakers are currently outputting sound by looking at the speaker indicators on the unit’s front panel (p.8). 00_RX-V479_V579_om_U.book Page 45 Wednesday, March 25, 2015 9:59 AM Enjoying stereoscopic sound fields (CINEMA DSP 3D) The unit is equipped with a variety of sound programs that utilize Yamaha's original DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual movie theaters or concert halls in your room and enjoy natural stereoscopic sound fields. Drama This program features stable reverberations that match a wide range of movie genres, from serious dramas to musicals and comedies. The reverberations are modest, but suitably stereophonic. The sound effects and background music are reproduced with a gentle echo that does not impinge on the articulation of the dialogue. You’ll never get tired listening for long periods. Mono Movie This program reproduces monaural video sources, such as classic movies, in an atmosphere of a good old movie theater. The program creates a pleasant space with depth, by adding breadth and the appropriate reverberation to the original audio. Sports This program allows listeners to enjoy the rich vividness of sport broadcasts and light entertainment programs. In sports broadcasts, the commentators’ voices are positioned clearly at the center, while the atmosphere inside the stadium is realistically conveyed by the peripheral delivery of the sounds of the fans in a suitable space. Action Game This program is suitable for action games, such as car racing and fighting games. The reality of, and emphasis on, various effects makes the player feel like they are right in the middle of the action, allowing for greater concentration. Use this program in combination with Compressed Music Enhancer for a more dynamic and strong sound field. Roleplaying Game This program is suitable for role-playing and adventure games. This program adds depth to the sound field for natural and realistic reproduction of background music, special effects, and dialogue from a wide variety of scenes. Use this program in combination with Compressed Music Enhancer for a clearer and more spatial sound field. Sound program category “CINEMA DSP” lights up CHARGE ENHANCER STEREO TUNED OUT SLEEP MUTE VOL. ECO Sci-Fi ADAPTIVE DRC VIRTUAL Sound program • You can adjust the sound field effect level in “DSP Level” (p.73) in the “Option” menu. • To use the conventional CINEMA DSP, set “CINEMA DSP 3D Mode” (p.86) in the “Setup” menu to “Off”. ■ Sound programs suitable for movies (MOVIE) The following sound programs are optimized for viewing video sources, such as movies, TV programs, and games. Standard This program creates a sound field that emphasizes the surround feeling without disturbing the original acoustic positioning of multichannel audio, such as Dolby Digital and DTS. Its design is based on the concept of the ideal movie theater, in which the audience is surrounded by beautiful reverberations from the left, right, and rear. Spectacle This program delivers the scale and grandeur of spectacular movie productions. It delivers an expansive sound space to match the cinemascope wide-screen, and boasts a broad dynamic range, providing everything from small delicate sounds to powerful loud booms. Sci-Fi This program clearly reproduces the finely elaborated sound design of the latest Sci-Fi and SFX movies. You can enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between dialogue, sound effects, and background music. Adventure This program is ideal for reproducing the sound design of action and adventure movies precisely. The sound field restrains reverberations, but puts emphasis on reproducing a sensation of expansiveness on both sides, powerful space expanded widely to the left and right. The restrained depth creates a clear and powerful space, while also maintaining the articulation of the sounds and the separation of the channels. En 45 00_RX-V479_V579_om_U.book Page 46 Wednesday, March 25, 2015 9:59 AM ■ Sound programs suitable for music (MUSIC) ■ Enjoying sound field effects without surround speakers (Virtual CINEMA DSP) The following sound programs are optimized for listening to music sources. Hall in Munich This program simulates a Munich concert hall with approximately 2,500 seats that uses stylish wood for the interior finishing. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena. Hall in Vienna This program simulates a 1700-seat, middle-sized concert hall with a shoebox shape that is traditional in Vienna. Pillars and ornate carvings create extremely complex reverberations from all around the audience, producing a very full, rich sound. Chamber This program creates a relatively wide space with a high ceiling, like an audience hall in a palace. It offers pleasant reverberations that are suitable for courtly music and chamber music. Cellar Club This program simulates an intimate concert venue with a low ceiling and homey atmosphere. A realistic, live sound field delivers powerful sounds that make you feel as if you are sitting in the front row in front of a small stage. The Roxy Theatre This program creates the sound field of a 460-seat rock music concert venue in Los Angeles. The listener’s virtual seat is at the center left of the hall. The Bottom Line This program creates the sound field at stage front in The Bottom Line, a famous New York jazz club once. The floor can seat 300 people to the left and right in a sound field offering real and vibrant sound. Music Video This program allows you to enjoy videos of pop, rock, and jazz concerts, as if you were there yourself. Immerse yourself in the hot concert atmosphere thanks to the vividness of the singers and solos on stage, a presence sound field that emphasizes the beat of rhythm instruments, and a surround sound field that reproduces the space of a big live hall. If you select one of the sound programs (except 2ch Stereo and 7ch/5ch Stereo) when no surround speakers are connected, the unit automatically creates the surround sound field using the front-side speakers. ■ Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT) You can enjoy the surround sound even when the surround speakers are placed in front. ■ Enjoying surround sound with headphones (SILENT CINEMA) You can enjoy surround or sound field effects, like a multichannel speaker system, with stereo headphones by connecting the headphones to the PHONES jack and selecting a sound program or a surround decoder. ■ Sound programs suitable for stereo playback (STEREO) You can select stereo playback. 2ch Stereo Use this program to mix down multichannel sources to 2 channels. When multichannel signals are input, they are down mixed to 2 channels and output from the front speakers (this program does not utilize CINEMA DSP). 7ch Stereo 5ch Stereo (RX-V579: 7ch Stereo, RX-V479: 5ch Stereo) Use this program to output sound from all speakers. When you play back multichannel sources, the unit mixes down the source to 2 channels, and then outputs the sound from all speakers. This program creates a larger sound field and is ideal for background music at parties. • CINEMA DSP 3D (p.45) and Virtual CINEMA DSP (p.46) do not work when “2ch Stereo”, “5ch Stereo” or “7ch Stereo” is selected. En 46 00_RX-V479_V579_om_U.book Page 47 Wednesday, March 25, 2015 9:59 AM Enjoying unprocessed playback ZONE A ZONE B You can play back input sources without any sound field effect processing. SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS STRAIGHT PROGRAM PROGRAM FM/AM USB INPUT VOLUME ■ Playing back in original channels (straight decode) When the straight decode mode is enabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources. NET 1 BLUETOOTH MUTE SETUPP Press STRAIGHT. Each time you press the key, the straight decode mode is enabled or disabled. CHARGE ENHANCER STEREO TUNED OUT RETURN TOP MENU RED VOL. ECO STRAIGHT GREEN YELLOW L POP-UP/MENU BLUE 1 Press PROGRAM repeatedly to select a surround decoder. The previously selected surround decoder is selected. You can change the surround decoder in “Sur.Decode” (p.72) in the “Option” menu. “SUR. DECODE” appears ENHANCER STEREO TUNED CHARGE OUT SLEEP MUTE VOL. ADAPTIVE DRC VIRTUAL ADAPTIVE DRC VIRTUAL • (RX-V579 only) To enable 6.1/7.1-channel playback from 5.1-channel sources when surround back speakers are used, set “Extended Surround” (p.73) in the “Option” menu to a setting other than “Off”. MEMORY TUNING For details on each decoder see “Glossary” (p.110). †‡Pro Logic SLEEP MUTE DISPLAY A HOME The surround decoder enables unprocessed multichannel playback from 2-channel sources. When a multichannel source is input, it works the same way as the straight decode mode. ECO OOPTION PTION ENTER ■ Playing back 2-channel sources in multichannel (surround decoder) bPro Logic Uses the Dolby Pro Logic decoder suitable for all sources. bPLII Movie Use the Dolby Pro Logic II decoder (or Dolby Pro Logic IIx decoder) suitable for movies. bPLIIx Movie* bPLII Music bPLIIx Music* bPLII Game TUNING PRESET Use the Dolby Pro Logic II decoder (or Dolby Pro Logic IIx decoder) suitable for music. bPLIIx Game* Use the Dolby Pro Logic II decoder (or Dolby Pro Logic IIx decoder) suitable for games. Neo: 6 Cinema Uses the DTS Neo: 6 decoder suitable for movies. Neo: 6 Music Uses the DTS Neo: 6 decoder suitable for music. * RX-V579 only • (RX-V579 only) You cannot select the Dolby Pro Logic IIx decoders when headphones are connected or when “Surround Back” in the “Setup” menu is set to “None”. • You can adjust the surround decoder parameters in “DSP Parameter” (p.86) in the “Setup” menu. En 47 00_RX-V479_V579_om_U.book Page 48 Wednesday, March 25, 2015 9:59 AM ZONE A Enjoying pure high fidelity sound (direct playback) ZONE B Enjoying compressed music with enhanced sound (Compressed Music Enhancer) SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS DIRECT BASS PROGRAM ENHANCER FM/AM When the direct playback mode is enabled, the unit plays back the selected source with the least circuitry in order to reduce the electrical noise from other circuitry (such as the front display). It allows you to enjoy Hi-Fi sound quality. 1 Each time you press the key, the direct playback mode is enabled or disabled. USB INPUT Press DIRECT. VOLUME NET ENHANCER STEREO TUNED CHARGE OUT BLUETOOTH DIRECT ADAPTIVE DRC VIRTUAL CHARGE • When the direct playback mode is enabled, the following functions are not available. – Selecting sound programs RETURN TOP MENU RED DISPLAY A HOME GREEN YELLOW L POP-UP/MENU BLUE MEMORY TUNING TUNING PRESET Press ENHANCER. “ENHANCER” lights up OOPTION PTION ENTER 1 Each time you press the key, Compressed Music Enhancer is enabled or disabled. VOL. ECO MUTE SETUPP SLEEP MUTE Compressed Music Enhancer adds depth and breadth to the sound, allowing you to enjoy a dynamic sound close to the original sound before it was compressed. This function can be used along with any other sound modes. ENHANCER STEREO TUNED OUT SLEEP MUTE VOL. ECO Enhancer On ADAPTIVE DRC VIRTUAL – Adjusting the tone control – Operating the on-screen and “Option” menus • Compressed Music Enhancer does not work on the following audio sources. – Viewing information on the front display (when not in operation) – Signals whose sampling rate is over 48 kHz – High-definition streaming audio Enhancing the bass (Extra Bass) Extra Bass allows you to enjoy enhanced bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. 1 Press BASS. Each time you press the key, Extra Bass is enabled or disabled. • You can also use “Extra Bass” (p.81) in the “Setup” menu to enable/disable Extra Bass. En 48 • You can also use “Enhancer” (p.74) in the “Option” menu to enable/disable Compressed Music Enhancer. 00_RX-V479_V579_om_U.book Page 49 Wednesday, March 25, 2015 9:59 AM Listening to FM/AM radio ZONE A ZONE B SLEEP You can tune into a radio station by specifying its frequency or selecting from registered radio stations. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM FM/AM • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models. Selecting a frequency for reception 1 “TUNER” is selected as the input source and then the frequency currently selected is displayed. • If you cannot obtain good reception on the radio, adjust the direction of the FM/AM antennas. FM/AM Press FM/AM to select a band. CHARGE ENHANCER STEREO TUNED OUT INPUT VOLUME FM 87.50MHz Setting the frequency steps NET BLUETOOTH SETUPP OPTION OPTION RETURN RED 1 2 DISPLAY A HOME GREEN YELLOW L POP-UP/MENU Hold down the key for about a second to search stations automatically. ECO ENHANCER STEREO TUNED SLEEP MUTE VOL. FM 98.50MHz When holding down STRAIGHT on the front panel, press z (power). ADAPTIVE DRC VIRTUAL Press TUNING repeatedly to set a frequency. OUT Set the unit to standby mode. ADAPTIVE DRC VIRTUAL “TUNED” lights up when a signal is received from a radio station. “STEREO” also lights up when a stereo signal is received. z (power) BLUE TUNING MEMORY TUNING At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM. Depending on your country or region, set the frequency steps to 100 kHz for FM and 10 kHz for AM. CHARGE ENTER TOP MENU 2 (Asia, Taiwan and General models only) MUTE SLEEP MUTE VOL. ECO USB TUNING • You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM radio reception by selecting “FM Mode” (p.72) in the “Option” menu. When the signal reception for an FM radio station is unstable, switching to monaural may improve it. PRESET PROGRAM 3 STRAIGHT • You can watch videos input from external devices while listening to radio by selecting the video input jack in “Video Out” (p.75) in the “Option” menu. Press PROGRAM repeatedly to select “TU”. CHARGE OUT ECO ENHANCER STEREO TUNED SLEEP MUTE VOL. TU••••FM50/AM9 4 5 ADAPTIVE DRC VIRTUAL Press STRAIGHT to select “FM100/AM10”. Press z (power) to set the unit to standby mode and turn it on again. En 49 00_RX-V479_V579_om_U.book Page 50 Wednesday, March 25, 2015 9:59 AM Registering favorite radio stations (presets) ZONE A ZONE B You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM FM/AM Automatically register FM radio stations with strong signals (up to 40 stations). FM/AM USB INPUT ■ Registering radio stations automatically (Auto Preset) When the Auto Preset process finishes, “FINISH” appears and the “Option” menu closes automatically. • To register AM radio stations, follow “Registering a radio station manually”. • (U.K. and Europe models only) Only Radio Data System broadcasting stations are stored automatically by the Auto Preset function. SETUPP OPTION Cursor Cursor keys keys ENTER ENTER RETURN TOP MENU RED OPTION DISPLAY A HOME GREEN YELLOW L POP-UP/MENU Press FM/AM to select “TUNER” as the input source. 2 3 Press OPTION. BLUE Auto Preset Select a radio station manually and register it to a preset number. 1 Follow “Selecting a frequency for reception” (p.49) to tune into the desired radio station. 2 Hold down MEMORY for more than 2 seconds. PRESET ENHANCER STEREO TUNED VOL. VOL. ADAPTIVE DRC VIRTUAL To start the Auto Preset process, press ENTER. The registration will start in 5 seconds. Press ENTER again to start the registration immediately. • To select a preset number for registering, press MEMORY once after tuning into the desired radio station, press PRESET to select a preset number, and then press MEMORY again. CHARGE ENHANCER STEREO TUNED OUT 02:Empty “SEARCH” appears during Auto Preset CHARGE ENHANCER STEREO TUNED SLEEP MUTE ADAPTIVE DRC VIRTUAL “Empty” (not in use) or the frequency currently registered VOL. 01:FM 87.50MHz SLEEP MUTE VOL. ECO ECO ADAPTIVE DRC VIRTUAL Preset number SLEEP MUTE Auto Preset OUT SLEEP MUTE 01:FM 98.50MHz Use the cursor keys to select “Auto Preset”. ECO 4 ENHANCER STEREO TUNED ECO TUNING PRESET The first time that you do register a station, the selected radio station will be registered to the preset number “01”. Thereafter, each radio station you select will be registered to the next empty (unused) preset number after the most recently registered number. OUT CHARGE MEMORY ADAPTIVE DRC VIRTUAL ■ Registering a radio station manually CHARGE OUT MEMORY TUNING RETURN 1 VOL. ECO NET MUTE SLEEP MUTE OUT VOLUME BLUETOOTH ENHANCER STEREO TUNED CHARGE ADAPTIVE DRC VIRTUAL Preset number from which to start the registration • To specify the preset number from which to start the registration, press PRESET or cursor keys (q/w) to select a preset number within 5 seconds after step 4 (while “READY” is displayed) and then press ENTER (or just wait for 5 seconds). • To cancel the Auto Preset process, press RETURN. En 50 00_RX-V479_V579_om_U.book Page 51 Wednesday, March 25, 2015 9:59 AM ZONE A ZONE B ■ Selecting a preset station ■ Clearing preset stations Tune into a registered radio station by selecting its preset number. Clear radio stations registered to the preset numbers. 1 Press FM/AM to select “TUNER” as the input source. 1 Press FM/AM to select “TUNER” as the input source. 2 Press PRESET repeatedly to select the desired radio station. 2 3 Press OPTION. SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM FM/AM FM/AM CHARGE OUT ECO USB INPUT ENHANCER STEREO TUNED SLEEP MUTE VOL. 01:FM 98.50MHz VOLUME NET Use the cursor keys to select “Clear Preset” and press ENTER. ADAPTIVE DRC VIRTUAL CHARGE ENHANCER STEREO TUNED OUT MUTE OPTION • “No Presets” appears when no radio stations are registered. 4 OPTION Cursor Cursor keys keys ENTER ENTER Use the cursor keys (q/w) to select a preset station to be cleared and press ENTER. CHARGE ENHANCER STEREO TUNED OUT TOP MENU RED 01:FM 98.50MHz DISPLAY A HOME GREEN YELLOW L POP-UP/MENU If the preset station is cleared, “Cleared” appears and then the next in-use preset number is displayed. BLUE CHARGE TUNING ENHANCER STEREO TUNED OUT 01:Cleared PRESET En 51 SLEEP MUTE VOL. ECO PRESET ADAPTIVE DRC VIRTUAL Preset station to be cleared MEMORY TUNING SLEEP MUTE VOL. ECO RETURN ADAPTIVE DRC VIRTUAL Clear Preset BLUETOOTH SETUPP SLEEP MUTE VOL. ECO ADAPTIVE DRC VIRTUAL 5 Repeat step 4 until all desired preset stations are cleared. 6 To exit from the menu, press OPTION. 00_RX-V479_V579_om_U.book Page 52 Wednesday, March 25, 2015 9:59 AM Radio Data System tuning ZONE A ZONE B Radio Data System is a data transmission system used by FM stations in many countries. The unit can receive various types of Radio Data System data, such as “Program Service”, “Program Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio Data System broadcasting station. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM ■ Displaying the Radio Data System information FM/AM USB INPUT VOLUME NET 1 BLUETOOTH MUTE SETUPP OPTION RETURN OPTION Cursor Cursor keys keys ENTER ENTER TOP MENU DISPLAY A HOME POP-UP/MENU RETURN Tune into the desired Radio Data System broadcasting station. • We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations (p.50). 2 Press INFO. ENHANCER STEREO TUNED CHARGE YELLOW L 1 When “TUNER” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Traffic Program” (Traffic Program) and press ENTER. The traffic information station search will start in 5 seconds. Press ENTER again to start the search immediately. • To cancel the search, press RETURN. • Texts in parentheses denote indicators on the front display. Item name TUNING PRESET ADAPTIVE DRC VIRTUAL Program Type BLUE MEMORY TUNING When “TUNER” is selected as the input source, the unit automatically receives traffic information. To enable this function, follow the procedure below to set the traffic information station. • To search upward/downward from the current frequency, press the cursor keys (q/w) while “READY” is displayed. SLEEP MUTE VOL. ECO GREEN ■ Receiving traffic information automatically Each time you press the key, the displayed item changes. OUT RED • “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio station does not provide the Radio Data System service. (U.K. and Europe models only) SLEEP About 3 seconds later, the corresponding information for the displayed item appears. The following screen appears for about 3 seconds when the search finishes. CHARGE OUT ENHANCER STEREO TUNED CHARGE OUT ECO SLEEP MUTE CLASSICS SLEEP MUTE VOL. TP FM101.30MHz VOL. ECO ENHANCER STEREO TUNED ADAPTIVE DRC VIRTUAL ADAPTIVE DRC VIRTUAL Traffic information station (frequency) Information Program Service Program service name • “TP Not Found” appears for about 3 seconds when no traffic information stations are found. Program Type Current program type Radio Text Information on the current program Clock Time Current time DSP Program Sound mode name Audio Decoder Decoder name Frequency Frequency En 52 00_RX-V479_V579_om_U.book Page 53 Wednesday, March 25, 2015 9:59 AM Playing back music via BLUETOOTH ZONE A ZONE B SLEEP You can play back music files stored on a BLUETOOTH device (such as smartphones) on the unit. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Follow the procedure below to establish a BLUETOOTH connection between a BLUETOOTH device (such as smartphones) and the unit, and play back music stored the BLUETOOTH device on the unit. PROGRAM The unit FM/AM BLUETOOTH device (such as smartphones) USB INPUT Playback BLUETOOTH device music on the unit • The unit does not support video playback via BLUETOOTH. VOLUME NET BLUETOOTH BLUETOOTH • To use the BLUETOOTH function, set “Bluetooth” (p.94) in the “Setup” menu to “On”. MUTE SETUPP OOPTION PTION RETURN RED Press BLUETOOTH to select “Bluetooth” as the input source. 2 On the BLUETOOTH device, select the unit (network name of the unit) from the available device list. • For details on supported BLUETOOTH devices, see “Supported devices and file formats” (p.112). ENTER TOP MENU 1 A connection between the BLUETOOTH device and the unit will be made. DISPLAY A HOME GREEN YELLOW L 3 BLUE MEMORY TUNING If the pass key is required, enter the number “0000”. POP-UP/MENU TUNING On the BLUETOOTH device, select a song and start playback. The playback screen (artist name, album name and song title) is displayed on the TV. External device operation keys PRESET • “Not found” appears when no BLUETOOTH devices are detected. • If the unit detects the BLUETOOTH device previously connected, the unit automatically connects to the BLUETOOTH device after Step 1. To establish another BLUETOOTH connection, first terminate the current BLUETOOTH connection. • To terminate the BLUETOOTH connection, perform one of the following operations. – Perform the disconnect operation on the BLUETOOTH device. – Select an input source other than “Bluetooth” on the unit. – Select “Disconnect” in “Audio Receive” (p.79) in the “Setup” menu. • You can use the external device operation keys (a, s, d, f, g) on the remote control to control playback. En 53 00_RX-V479_V579_om_U.book Page 54 Wednesday, March 25, 2015 9:59 AM Playing back iPod music ZONE A ZONE B SLEEP You can play back iPod music on the unit using a USB cable supplied with the iPod. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS You can also play back iPod music in other methods. For details, see the following pages. PROGRAM • Playing back music with AirPlay (p.57) • The iPod charges while it is connected to the unit. If you set the unit to standby mode while the iPod is charging, the iPod continues to charge up to 4 hours. If “Network Standby” (p.93) in the “Setup” menu is set to “On”, it continues to charge without limit. • Playing back music stored on a BLUETOOTH device (p.53) FM/AM • Disconnect the iPod from the USB jack when it is not in use. • AV CONTROLLER (p.6) USB USB INPUT VOLUME Playback of iPod content NET • You cannot play back iPod video on the unit. BLUETOOTH Follow the procedure below to operate the iPod contents and start playback. MUTE SETUPP OOPTION PTION ENTER RETURN TOP MENU RED Cursor keys ENTER DISPLAY HOME GREEN YELLOW L POP-UP/MENU BLUE MEMORY TUNING TUNING PRESET DISPLAY RETURN • For details on playable iPod devices, see “Supported devices and file formats” (p.112). You can control the iPod with the menu displayed on the TV screen. Connecting an iPod • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display, or directly operate the iPod itself in the simple play mode (p.56). Connect your iPod to the unit with the USB cable supplied with the iPod. 1 2 • “_” (underscore) will be displayed for characters not supported by the unit. 1 Connect the USB cable to the iPod. Press USB to select “USB” as the input source. The browse screen (p.55) is displayed on the TV. Connect the USB cable to the USB jack. The unit (front) • If playback is ongoing on your iPod, the playback screen is displayed. RADIO STRAIGHT 2 AUX (CONNECT) AUDIO 5V Use the cursor keys to select an item and press ENTER. 1A If a song is selected, playback starts and the playback screen (p.55) is displayed. • To return to the previous screen, press RETURN. • To switch the screen mode browse/playback/off, press DISPLAY. CHARGE ENHANCER STEREO TUNED OUT • To operate the iPod manually to select content or control playback, switch to the simple play mode (p.56). SLEEP MUTE VOL. ECO Connected ADAPTIVE DRC VIRTUAL En 54 00_RX-V479_V579_om_U.book Page 55 Wednesday, March 25, 2015 9:59 AM ■ Browse screen ZONE A 1 ZONE B SLEEP BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS 2 PROGRAM 3 USB SETUPP OOPTION PTION ENTER RETURN Cursor keys ENTER 1/6 1 Status indicators YELLOW L TUNING 4 Status indicators Use the following remote control keys to control playback. Display the current repeat/shuffle settings (p.56) and playback status (such as play/pause). PRESET Function BLUE TUNING External External device device operation keys 2 Playback information Displays the artist name, album name, song title, and elapsed time/song length. Icon MEMORY Display the current repeat/shuffle settings (p.56) and playback status (such as play/pause). 3 Item number/total Press the cursor key (r) and then use the cursor keys (q/w) to select an item. Press ENTER to confirm the selection. POP-UP/MENU 5:10 [DISPLAY] : Screen Off 5 Operation menu DISPLAY A HOME 2 Song Title [DISPLAY] to Now Playing Displays the list of iPod content. Use the cursor keys to select an item and press ENTER to confirm the selection. MUTE Album Name 2:30 2 Contents list BLUETOOTH GREEN Artist Name 5 1 List name VOLUME NET RED iPod Now Playing Playlists Artists Albums Songs Genres Composers FM/AM INPUT 1 4 iPod Music SCENE TOP MENU ■ Playback screen External device operation keys Function a Resumes playback from pause. s Stops playback. d Stops playback temporarily. Moves 10 pages backward. f Moves to the previous page of the list. g Skips forward/backward. h Moves to the next page of the list. j Searches forward/backward (by holding down). Moves 10 pages forward. Moves to the playback screen. • A content name of a current playback is displayed on the front display. To switch the displayed item, press INFO (p.71). • A content selected by the cursor is displayed on the front display. En 55 00_RX-V479_V579_om_U.book Page 56 Wednesday, March 25, 2015 9:59 AM ■ Operating the iPod itself (simple play) ZONE A 1 2 ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM Use the cursor keys to select “iPod Mode” and press ENTER. To display the TV menu screen, select “iPod Mode” and press ENTER again. USB INPUT You can configure the repeat/shuffle settings of your iPod. Press OPTION. The TV menu screen turns off and iPod operations are enabled. FM/AM VOLUME 3 NET BLUETOOTH ■ Repeat/shuffle settings • During simple play, configure the repeat/shuffle settings directly on your iPod. 1 When “USB” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Repeat” (Repeat) or “Shuffle” (Shuffle) and press ENTER. Operate your iPod itself to start playback. • To return to the previous screen during menu operations, press RETURN. MUTE SETUPP OPTION RETURN RED 3 OPTION Cursor Cursor keys keys ENTER ENTER TOP MENU • Texts in parentheses denote indicators on the front display. Use the cursor keys (e/r) to select a setting. Item Setting Function Off (Off) Turns off the repeat function. One (One) Plays back the current song repeatedly. “c” appears in the TV screen. All (All) Plays back all songs repeatedly. “v” appears in the TV screen. Off (Off) Turns off the shuffle function. Songs (Songs) Plays back songs in random order. “x” appears in the TV screen. Albums (Albums) Plays back albums in random order. “x” appears in the TV screen. DISPLAY A HOME GREEN YELLOW L POP-UP/MENU Repeat (Repeat) RETURN BLUE MEMORY TUNING TUNING Shuffle (Shuffle) PRESET 4 En 56 To exit from the menu, press OPTION. 00_RX-V479_V579_om_U.book Page 57 Wednesday, March 25, 2015 9:59 AM Playing back music with AirPlay Playback of iTunes/iPod music contents The AirPlay function allows you to play back iTunes or iPhone/iPad/iPod touch music on the unit via network. Follow the procedure below to play back iTunes/iPod music contents on the unit. iTunes 1 PC Router Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod. If the iTunes/iPod recognizes the unit, the AirPlay icon ( ) appears. The unit iTunes (example) iPod iOS7/iOS8 (example) iPod iOS6 (example) (Wired network or wireless network) iPhone/iPad/iPod touch • If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly. • To use this function, the unit and your PC or iPod must be connected to the same router (p.25). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.92) in the “Setup” menu. 2 On the iTunes/iPod, click (tap) the AirPlay icon and select the unit (network name of the unit) as the audio output device. 3 Select a song and start playback. • If the iPod does not recognize the unit, check your network environment (p.25). • This section describes “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod touch”, “iPhone” and “iPad”, unless otherwise specified. The unit automatically selects “AirPlay” as the input source and starts playback. The playback screen is displayed on the TV. • For details on supported iPod devices, see “Supported devices and file formats” (p.112). • The playback screen is available only when your TV is connected to the unit via HDMI. En 57 00_RX-V479_V579_om_U.book Page 58 Wednesday, March 25, 2015 9:59 AM Use the following remote control keys to control playback. ZONE A • You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network Standby” (p.93) in the “Setup” menu to “On”. ZONE B SLEEP • You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p.93) in the “Setup” menu. SCENE BD DVD STRAIGHT NET TV DIRECT RADIO ENHANCER • If you select the other input source on the unit during playback, playback on the iTunes/iPod stops automatically. BASS • You can adjust the unit’s volume from the iTunes/iPod during playback. To disable volume controls from iTunes/iPod, set “Volume Interlock” (p.75) in the “Option” menu to “Off”. PROGRAM External device operation keys a Resumes playback from pause. s Stops playback. d Stops playback temporarily. f g FM/AM Function Skips forward/backward. Caution USB INPUT • When you use iTunes/iPod controls to adjust volume, the volume may be unexpectedly loud. This could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop playback on the iTunes/iPod immediately. VOLUME NET BLUETOOTH MUTE SETUPP • To control iTunes playback with the remote control of the unit, you need to configure the iTunes preferences to enable iTunes control from remote speakers in advance. iTunes (example of English version) ■ Playback screen OOPTION PTION ENTER 1 AirPlay Now Playing RETURN DISPLAY A Artist Name TOP MENU HOME POP-UP/MENU Album Name 2 Song Title 2:30 RED GREEN YELLOW L BLUE MEMORY TUNING 5:30 TUNING External External device d evice operation operation keys keys 1 Playback indicator Check this box PRESET 2 Playback information Displays the artist name, album name, song title, and elapsed time/song length. En 58 00_RX-V479_V579_om_U.book Page 59 Wednesday, March 25, 2015 9:59 AM Playing back music stored on a USB storage device ZONE A ZONE B SLEEP You can play back music files stored on a USB storage device on the unit. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Follow the procedure below to operate the USB storage device contents and start playback. • For details on playable USB devices, see “Supported devices and file formats” (p.112). PROGRAM FM/AM USB • Operations with TV screen are available only when your TV is connected to the unit via HDMI. VOLUME NET 1 BLUETOOTH MUTE Connect the USB storage device to the USB jack. • “_” (underscore) will be displayed for characters not supported by the unit. The unit (front) 1 RADIO SETUPP ENTER RETURN RED Cursor Cursor keys keys ENTER DISPLAY HOME GREEN YELLOW L POP-UP/MENU AUX (CONNECT) AUDIO 5V 1A • If playback is ongoing on your USB storage device, the playback screen is displayed. DISPLAY 2 RETURN BLUE TUNING Use the cursor keys to select an item and press ENTER. If a song is selected, playback starts and the playback screen (p.60) is displayed. MEMORY TUNING Press USB to select “USB” as the input source. The browse screen (p.60) is displayed on the TV. OOPTION PTION STRAIGHT TOP MENU You can control the USB memory device with the menu displayed on the TV screen. Connecting a USB storage device USB INPUT Playback of USB storage device contents USB storage device PRESET • To return to the previous screen, press RETURN. • To switch the screen mode browse/playback/off, press DISPLAY. • Files not supported by the unit cannot be selected. • If the USB storage device contains many files, it may take time to load them. In this case, “Loading...” appears in the front display. • Stop playback of the USB storage device before disconnect it from the USB jack. • Connect a USB storage device directly to the USB jack of the unit. Do not use extension cables. En 59 00_RX-V479_V579_om_U.book Page 60 Wednesday, March 25, 2015 9:59 AM ■ Browse screen ZONE A ZONE B 1 SLEEP TV NET RADIO STRAIGHT DIRECT ENHANCER BASS 2 PROGRAM USB Now Playing Blues Classical Electronica Jazz Pop Rock Soundtrack Speaking 3 FM/AM USB INPUT 4 USB Top SCENE BD DVD ■ Playback screen Artist Name 5 1 Status indicators Display the current repeat/shuffle settings (p.61) and playback status (such as play/pause). Displays the list of USB storage device contents. Use the cursor keys to select an item and press ENTER to confirm the selection. 2 Playback information Displays the artist name, album name, song title, and elapsed time. 3 Item number/total SETUPP 2 [DISPLAY] : Screen Off 2 Contents list MUTE Song Title 1/12 [DISPLAY] to Now Playing NET BLUETOOTH Album Name 2:30 1 List name VOLUME 1 Use the following remote control keys to control playback. OOPTION PTION 4 Status indicators ENTER RETURN TOP MENU Cursor Cursor keys keys ENTER 5 Operation menu DISPLAY A HOME Display the current repeat/shuffle settings (p.61) and playback status (such as play/pause). Press the cursor key (r) and then use the cursor keys (q/w) to select an item. Press ENTER to confirm the selection. POP-UP/MENU Icon RED GREEN YELLOW L TUNING PRESET External External device d evice operation operation keys keys Function a Resumes playback from pause. s Stops playback. d Stops playback temporarily. f BLUE MEMORY TUNING Function External device operation keys Moves 10 pages backward. g Skips forward/backward. Moves to the previous page of the list. Moves to the next page of the list. • A content name of a current playback is displayed on the front display. To switch the displayed item, press INFO (p.71). Moves 10 pages forward. Moves to the playback screen. • A content selected by the cursor is displayed on the front display. En 60 00_RX-V479_V579_om_U.book Page 61 Wednesday, March 25, 2015 9:59 AM ■ Repeat/shuffle settings ZONE A You can configure the repeat/shuffle settings for playback of USB storage device contents. ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM 1 When “USB” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Repeat” (Repeat) or “Shuffle” (Shuffle) and press ENTER. FM/AM USB INPUT VOLUME • To return to the previous screen during menu operations, press RETURN. NET • Texts in parentheses denote indicators on the front display. BLUETOOTH 3 MUTE SETUPP OPTION TOP MENU RED Repeat (Repeat) DISPLAY A HOME GREEN YELLOW L POP-UP/MENU RETURN BLUE MEMORY TUNING Item Cursor Cursor keys keys ENTER ENTER RETURN OPTION Use the cursor keys (e/r) to select a setting. TUNING Shuffle (Shuffle) Setting Function Off (Off) Turns off the repeat function. One (One) Plays back the current song repeatedly. “c” appears on the TV screen. All (All) Plays back all songs in the current album (folder) repeatedly. “v” appears on the TV screen. Off (Off) Turns off the shuffle function. On (On) Plays back songs in the current album (folder) in random order. “x” appears on the TV screen. PRESET 4 To exit from the menu, press OPTION. En 61 00_RX-V479_V579_om_U.book Page 62 Wednesday, March 25, 2015 9:59 AM Playing back music stored on media servers (PCs/NAS) ❑ For Windows Media Player 11 You can play back music files stored on your PC or DLNA-compatible NAS on the unit. • To use this function, the unit and your PC must be connected to the same router (p.25). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.92) in the “Setup” menu. • The audio may be interrupted while using the wireless network connection. In this case, use the wired network connection. • For details on playable file formats, see “Supported devices and file formats” (p.112). 1 2 3 Start Windows Media Player 11 on your PC. 4 Click “OK” to exit. Select “Library”, then “Media Sharing”. Check the “Share my media to” box, select the unit’s icon, and click “Allow”. Media sharing setup • For details on media sharing settings, refer to Windows Media Player help. To play back music files stored on your PC or DLNA-compatible NAS, first you need to configure the media sharing setting on each music server. ■ For a PC or a NAS with other DLNA server software installed ■ For a PC with Windows Media Player installed Refer to the instruction manual for the device or software and configure the media sharing settings. ❑ For Windows Media Player 12 1 2 3 4 Start Windows Media Player 12 on your PC. 5 Click “OK” to exit. Select “Stream”, then “Turn on media streaming”. Click “Turn on media streaming”. Select “Allowed” from the drop-down list next to the unit’s model name. En 62 00_RX-V479_V579_om_U.book Page 63 Wednesday, March 25, 2015 9:59 AM ■ Browse screen Playback of PC music contents ZONE A ZONE B 1 Follow the procedure below to operate the PC music contents and start playback. SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS NET You can control the PC/NAS with the menu displayed on the TV screen. 2 PROGRAM Blues Classical Electronica Jazz Pop Rock Soundtrack Speaking 3 • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. FM/AM 4 SERVER NAS A 5 1/14 [DISPLAY] to Now Playing • “_” (underscore) will be displayed for characters not supported by the unit. USB INPUT VOLUME 1 NET BLUETOOTH 1 List name Press NET repeatedly to select “SERVER” as the input source. The browse screen (p.63) is displayed on the TV. MUTE 2 Contents list Displays the list of PC content. Use the cursor keys to select an item and press ENTER to confirm the selection. 3 Item number/total SETUPP OOPTION PTION ENTER RETURN TOP MENU RED Cursor Cursor keys keys ENTER DISPLAY HOME GREEN YELLOW L POP-UP/MENU BLUE MEMORY TUNING TUNING DISPLAY • If playback of a music file selected from the unit is ongoing on your PC, the playback screen is displayed. 2 Use the cursor keys to select a music server and press ENTER. 3 Use the cursor keys to select an item and press ENTER. RETURN If a song is selected, playback starts and the playback screen (p.64) is displayed. PRESET 4 Status indicators Display the current repeat/shuffle settings (p.64) and playback status (such as play/pause). 5 Operation menu Press the cursor key (r) and then use the cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Icon Function Moves 10 pages backward. Moves to the previous page of the list. Moves to the next page of the list. • To return to the previous screen, press RETURN. Moves 10 pages forward. • To switch the screen mode browse/playback/off, press DISPLAY. Moves to the playback screen. • Files not supported by the unit cannot be selected. En 63 00_RX-V479_V579_om_U.book Page 64 Wednesday, March 25, 2015 9:59 AM ■ Playback screen ZONE A ■ Repeat/shuffle settings You can configure the repeat/shuffle settings for the playback of PC music content. ZONE B SLEEP 1 SERVER Now Playing SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Artist Name Song Title PROGRAM 1 When “SERVER” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Repeat” (Repeat) or “Shuffle” (Shuffle) and press ENTER. 2 Album Name 2:30 [DISPLAY] : Screen Off FM/AM USB INPUT 1 Status indicators VOLUME NET 2 Playback information MUTE Displays the artist name, album name, song title, and elapsed time. SETUPP OPTION ENTER RETURN TOP MENU RED OPTION Cursor Cursor keys keys ENTER DISPLAY A HOME GREEN YELLOW L POP-UP/MENU RETURN BLUE MEMORY TUNING • To return to the previous screen during menu operations, press RETURN. Display the current repeat/shuffle settings (p.64) and playback status (such as play/pause). BLUETOOTH TUNING Use the following remote control keys to control playback. External device operation keys • Text in parentheses denotes indicators on the front display. 3 Use the cursor keys (e/r) to select a setting. Item a Resumes playback from pause. s Stops playback. d Stops playback temporarily. g Function Turns off the repeat function. One (One) Plays back the current song repeatedly. “c” appears on the TV screen. All (All) Plays back all songs in the current album (folder) repeatedly. “v” appears on the TV screen. Off (Off) Turns off the shuffle function. On (On) Plays back songs in the current album (folder) in random order. “x” appears on the TV screen. Function Repeat (Repeat) f External External device d evice operation operation keys keys Setting Off (Off) Skips forward/backward. Shuffle (Shuffle) PRESET • You can also use a DLNA-compatible Digital Media Controller (DMC) to control playback. For details, see “DMC Control” (p.93). En 64 4 To exit from the menu, press OPTION. 00_RX-V479_V579_om_U.book Page 65 Wednesday, March 25, 2015 9:59 AM Listening to Internet radio ZONE A ZONE B SLEEP You can listen to Internet radio stations from all over the world. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS ■ Browse screen NET 1 • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. PROGRAM • To use this function, the unit must be connected to the Internet (p.25). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.92) in the “Setup” menu. FM/AM 2 • You may not be able to receive some Internet radio stations. USB INPUT • The unit uses the vTuner Internet radio station database service. VOLUME BLUETOOTH SETUPP ENTER RETURN TOP MENU RED Cursor keys ENTER DISPLAY HOME GREEN YELLOW L POP-UP/MENU TUNING PRESET RETURN Displays the list of Internet radio content. Use the cursor keys to select an item and press ENTER to confirm the selection. You can control the Internet radio with the menu displayed on the TV screen. 3 Item number/total 1 5 Operation menu Press NET repeatedly to select “NET RADIO” as the input source. The browse screen (p.65) is displayed on the TV. BLUE MEMORY TUNING DISPLAY 1/7 [DISPLAY] to Now Playing 2 Contents list Follow the procedure below to select an Internet radio station and start playback. OOPTION PTION 2 5 1 List name Playback of Internet radio MUTE Bookmarks Locations Genres New Stations Popular Stations Podcasts Help 3 • This service may be discontinued without notice. NET 4 NET RADIO Top Use the cursor keys to select an item and press ENTER. If an Internet radio station is selected, playback starts and the playback screen (p.66) is displayed. 4 Playback indicator Press the cursor key (r) and then use the cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Icon Function Moves 10 pages backward. Moves to the previous page of the list. Moves to the next page of the list. Moves 10 pages forward. • To return to the previous screen, press RETURN. Moves to the playback screen. • To switch the screen mode browse/playback/off, press DISPLAY. En 65 00_RX-V479_V579_om_U.book Page 66 Wednesday, March 25, 2015 9:59 AM ■ Playback screen ZONE A ZONE B SLEEP 1 NET RADIO Now Playing SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Station Name 2 Album Name Song Title PROGRAM 2:30 [DISPLAY] : Screen Off FM/AM USB INPUT 1 Playback indicator VOLUME NET 2 Playback information BLUETOOTH Displays the station name, album name, song title, and elapsed time. MUTE SETUPP • Use the external device operation key (s) to stop playback. OOPTION PTION • Some information may not be available depending on the station. ENTER RETURN TOP MENU RED DISPLAY A HOME GREEN YELLOW L POP-UP/MENU BLUE MEMORY TUNING TUNING PRESET External device device External operation keys operation keys En 66 00_RX-V479_V579_om_U.book Page 67 Wednesday, March 25, 2015 9:59 AM Registering favorite Internet radio stations (bookmarks) ZONE A ZONE B You can register your favorite Internet radio stations to the “Bookmarks” folder. SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS ■ Registering the station with the Option menu PROGRAM 1 2 USB VOLUME NET BLUETOOTH MUTE SETUPP OPTION ENTER RETURN TOP MENU RED GREEN YELLOW L BLUE TUNING PRESET While listening to Internet radio, press OPTION. Use the cursor keys to select “Bookmark On” and press ENTER. • On the playback screen, the current station is added to the “Bookmarks” folder. On the browse screen, the station selected in the list is added to the “Bookmarks” folder. Enter the vTuner ID in this area. • To remove stations from the “Bookmarks” folder, select the station in the folder and then “Bookmark Off”. • To use this feature, you need to create your personal account. Create your account using your e-mail address. POP-UP/MENU MEMORY TUNING You can switch the language. OPTION Cursor Cursor keys keys ENTER DISPLAY A HOME Access the vTuner website (http://yradio.vtuner.com/) with the web browser on your PC and enter the vTuner ID. Follow the procedure below to register your favorite station to the “Bookmarks” folder. FM/AM INPUT 3 ■ Registering the station on the vTuner website You can also register your favorite Internet radio stations on the vTuner website. 1 Select any of Internet radio stations on the unit. This operation is necessary to register the radio station for the first time. 2 Check the vTuner ID of the unit. You can find the vTuner ID in “Information” (p.92) in the “Setup” menu. En 67 4 Register your favorite radio stations. Click the “Add” icon (❤+) next to the station name. • To remove the station from the “Bookmarks” folder, select “Bookmarks” in the Home screen, and then click the “Remove” icon (❤–) next to the station name. 00_RX-V479_V579_om_U.book Page 68 Wednesday, March 25, 2015 9:59 AM Playing back music in multiple rooms (RX-V579 only) The Zone A/B function allows you to play back an input source in the room where the unit is installed (Zone A) and in another room (Zone B). Connecting Zone B speakers For example, you can turn on Zone A (turn off Zone B) when you are in the living room, and turn on Zone B (turn off Zone A) when you are in the study room. Also, you can turn on both zones when you want to enjoy the same input source in those rooms simultaneously. Connect the device that will be used in Zone B to the unit. Caution • Remove the unit’s power cable from the AC wall outlet before connecting speakers. • Ensure that the core wires of the speaker cable do not touch one another or come into contact with the unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit, “Check SP Wires” will appear on the front display when the unit is turned on. Connect the speakers placed in Zone B to the unit with speaker cables. To utilize the SURROUND BACK/BI AMP/ZONE B jacks for Zone B speakers, set “Power Amp Assign” (p.80) in the “Setup” menu to “Zone B” after connecting the power cable to an AC wall outlet. The unit (rear) Study room (Zone B) SPEAKERS DC OUT 5V 0.5A PB FRONT CENTER SURROUND SURROUND BACK/BI AMP /ZONE B SINGLE Y OR OUT 1 Living room (Zone A) 2 SUBWOOFER PRE OUT • Multichannel sources are mixed down to 2 channels and output to the Zone B. • The same input source is applied to both Zone A and Zone B. 1 • By default, the volume for Zone B changes in conjunction with the volume for Zone A. If there is volume difference between Zone A/B, you can correct it in “ZoneB Trim” in the “Option” menu (p.69). Also, you can adjust the volume for Zone B separately (p.69). 1 9 • You can automatically enable/disable the audio output to Zone A/B in conjunction with a scene selection (p.43) 2 2 3 4 5 Zone B Zone A • Surround back speakers or bi-amplified front speakers cannot be used while the Zone B function is enabled. En 68 00_RX-V479_V579_om_U.book Page 69 Wednesday, March 25, 2015 9:59 AM ZONE A ZONE B ZONE A ZONE B z SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Operating the Zone B ■ Basic playback procedure 1 2 PROGRAM Input Input selection selection keys keys FM/AM USB INPUT VOLUME Setting range -10.0 dB to +10.0 dB (0.5 dB increments) Press z (receiver power). Default 0.0 dB Each time you press the key, the ZONE B audio output is on or off. VOLUME OUT 1 2 ECO OPTION ENTER RETURN TOP MENU RED Cursor Cursor keys keys ENTER DISPLAY A HOME GREEN YELLOW L POP-UP/MENU BLUE HDMI1 MUTE OPTION TUNING PRESET To exit from the menu, press OPTION. • This setting is not effective when “ZoneB Volume” (p.88) in the “Setup” menu is set to “Async.”. PARTY SLEEP MUTE ZONE ZONE 2 A 3 B VOL. ADAPTIVE DRC VIRTUAL 3 Use the input selection keys to select an input source. 4 Start playback on the external device or select a radio station. RETURN 5 Press VOLUME to adjust the volume. MEMORY TUNING 4 “ZONE B” lights up ENHANCER STEREO TUNED CHARGE BLUETOOTH SETUPP Use the cursor keys (q/w) to select “ZoneB Trim” (ZB.Trim) and the cursor keys (e/r) to adjust the setting. Slide the Zone switch to “ZONE B”. NET MUTE 3 ■ Correcting volume difference between Zone A and Zone B If you are bothered by volume difference between Zone A/B, follow the procedure below to adjust the volume for Zone B. 1 2 Press OPTION. Use the cursor keys to select “Volume Trim” (Volume Trim) and press ENTER. • To return to the previous screen during menu operations, press RETURN. • Text in parentheses denotes indicators on the front display. En 69 ■ Adjusting the volume for Zone B separately You can separately adjust the volume for Zone B using the remote control when “ZoneB Volume” (p.88) in the “Setup” menu is set to “Async.”. 1 2 Slide the Zone switch to “ZONE B”. Press VOLUME to adjust the volume for Zone B. • To mute the audio output to Zone B, press MUTE. • The volume of the Zone B is not displayed on the front display. 00_RX-V479_V579_om_U.book Page 70 Wednesday, March 25, 2015 9:59 AM Useful functions ZONE A ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS Registering favorite items (shortcut) You can register up to 40 favorite USB and network contents as shortcuts and access them directly by selecting the shortcut numbers. PROGRAM FM/AM USB • You can also use the “Bookmark” feature to register Internet radio stations (p.67). INPUT VOLUME NET USB NET BLUETOOTH BLUETOOTH Select a desired item and register it to a shortcut number. OOPTION PTION 1 2 ENTER RETURN TOP MENU DISPLAY A HOME POP-UP/MENU YELLOW L TUNING CHARGE OUT ENHANCER SLEEP MUTE VOL. ECO 01:USB ADAPTIVE DRC VIRTUAL – A PC which contains the registered item is turned off or not connected to the network. CHARGE ENHANCER – The registered network content is temporarily unavailable or out of service. SLEEP MUTE – The registered item (file) has been deleted or moved to another location. VOL. ADAPTIVE DRC VIRTUAL 01:Empty – A BLUETOOTH connection cannot be established. • When you register music files stored on a USB storage device or a PC, this unit memorizes the relative position of the music files in the folder. If you have added or deleted any music files to or from the folder, this unit may not recall the music file correctly. In such cases, register the items again. Shortcut number (flashes) MEMORY PRESET • To change a shortcut number to which the item will be registered, use PRESET to select the shortcut number after step 2. CHARGE ENHANCER OUT SLEEP MUTE VOL. ECO 02:Empty ADAPTIVE DRC VIRTUAL “Empty” (not in use) or item currently registered 3 • “No Presets” appears when no items are registered. Hold down MEMORY for 3 seconds. TUNING PRESET Press PRESET repeatedly to select a desired item. – A USB storage device which contains the registered item is not connected to this unit. BLUE MEMORY Press BLUETOOTH, NET or USB. • The registered item cannot be recalled in the following cases. ECO GREEN 1 2 Play back a song or a radio station to be registered. OUT RED Recall a registered item by selecting the shortcut number. ■ Registering an item MUTE SETUPP • BLUETOOTH and AirPlay are applied to the input source. You cannot register particular songs in the device individually. ■ Recalling a registered item To confirm the registration, press MEMORY. En 70 00_RX-V479_V579_om_U.book Page 71 Wednesday, March 25, 2015 9:59 AM Switching information on the front display 1 Press INFO. Each time you press the key, the displayed item changes. ENHANCER STEREO TUNED CHARGE SLEEP MUTE OUT VOL. ECO ADAPTIVE DRC VIRTUAL Audio Decoder Item name About 3 seconds later, the corresponding information for the displayed item appears. ENHANCER STEREO TUNED CHARGE OUT SLEEP MUTE VOL. ECO †‡Pro Logic ADAPTIVE DRC VIRTUAL Information • Available items vary depending on the selected input source. The displayed item can also be applied separately to each input source group. Input source group Item HDMI AV AUX AUDIO ** Input (input source name), DSP Program (sound mode name), Audio Decoder (decoder name*) BLUETOOTH USB SERVER AirPlay Song (song title), Artist (artist name), Album (album name), DSP Program (sound mode name), Audio Decoder (decoder name*) During simple playback of iPod: Input (input source name), DSP Program (sound mode name), Audio Decoder (decoder name) NET RADIO Song (song title), Album (album name), Station (station name), DSP Program (sound mode name), Audio Decoder (decoder name*) TUNER Frequency (frequency), DSP Program (sound mode name), Audio Decoder (decoder name*) (U.K. and Europe models only) Radio Data System data is also available when the unit is tuned into a Radio Data System broadcasting station (p.52). * The name of the audio decoder currently activated is displayed. If no audio decoder is activated, “Decoder Off” appears. ** RX-V479 only En 71 00_RX-V479_V579_om_U.book Page 72 Wednesday, March 25, 2015 9:59 AM Configuring playback settings for different playback sources (Option menu) Option menu items You can configure separate playback settings for different playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. • Available items vary depending on the selected input source. • Text in parentheses denotes indicators on the front display. CHARGE ENHANCER STEREO TUNED SLEEP MUTE OUT • Default settings are underlined. VOL. ECO Input Select • Depending on the region of purchase, some menu items for audio streaming services are also available. For details, refer to each manual on the supplied CD-ROM. ADAPTIVE DRC VIRTUAL Item Input Select (Input) Front display Tone Control (Tone Control) Option Program (PRG) Sur.Decode (SrDec) DSP Level (DSP Level) Input Select Tone Control DSP/Surround Volume Trim Lipsync Signal Info Audio In DSP/Surround Adaptive DRC (DSP/Surround) (A.DRC) Extended Surround (EXTD) TV screen 2 Use the cursor keys to select an item and press ENTER. Adjusts the sound field effect level. Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when the volume is adjusted. (RX-V579 only) Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used. Enhancer Enables/disables Compressed Music Enhancer. (Enhancer) Input Trim Corrects volume differences between input sources. (In.Trim) Subwoofer Trim Volume Trim Fine-adjusts the subwoofer volume. (Volume Trim) (SW.Trim) (RX-V579 only) ZoneB Trim (ZB.Trim) Corrects volume differences between Zone A/B. Enables/disables the “Lipsync” setting in the “Setup” Lipsync (Lipsync) menu. Signal Info (Signal Info) Displays information about the video/audio signal. Combines the video jack of the selected input source Audio In (Audio) with an audio jack of others. Video Out (Video) Selects a video to be output with radio sounds. Switches between “Stereo” and “Mono” for FM radio reception. FM Mode (FM Mode) Automatically registers FM radio stations with strong Auto Preset (Auto Preset) signals as presets. Clear Preset (Clear Preset) Clear radio stations registered to preset numbers. • To return to the previous screen during menu operations, press RETURN. 3 4 Function Page Switches the input source. 73 Adjusts the high-frequency range and low-frequency 73 range of sounds. Select the sound programs and stereo playback. 45 Select which surround decoder is used when 47 Sur.Decode is selected as the program. Use the cursor keys (e/r) to select a setting. To exit from the menu, press OPTION. En 72 73 73 73 74 74 74 69 74 74 75 75 49 50 51 00_RX-V479_V579_om_U.book Page 73 Wednesday, March 25, 2015 9:59 AM Item Traffic Program (Traffic Program) iPod Mode (iPod Mode) Repeat (Repeat) Shuffle (Shuffle) Volume Interlock (Interlock) Bookmark On (Bookmark On) Bookmark Off (Bookmark Off) ■ DSP/Surround (DSP/Surround) Function Page (U.K. and Europe models only) 52 Automatically searches for a traffic information station. Switches the iPod operation mode. 56 Configures the repeat setting for the iPod (p.56), — USB storage device (p.61), or media server (p.64). Configures the shuffle setting for the iPod (p.56), — USB storage device (p.61), or media server (p.64). Enables/disables volume controls from iTunes/iPod 75 via AirPlay. Adds your favorite Internet radio station to the “Bookmarks” folder, or removes it from the 67 “Bookmarks” folder. Configures the sound field program and surround settings. ❑ DSP Level (DSP Level) Adjusts the sound field effect level. Setting range -6 dB to 0 dB to +3 dB ❑ Adaptive DRC (A.DRC) Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when the volume level is adjusted. When it is set to “On”, it is useful for listening to playback at a low volume at night. ■ Input Select (Input) Settings Switches the input source. Press ENTER to switch to the selected input source. Choices (RX-V579) HDMI 1-6, AV 1-6, TUNER, USB, SERVER, NET RADIO, Airplay, (network sources), Bluetooth, AUX On (On) Automatically adjusts the dynamic range. Off (Off) The dynamic range is not automatically adjusted. If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a high volume. Choices (RX-V479) HDMI 1-6, AUDIO 1-2, AV 1-4, TUNER, USB, SERVER, NET RADIO, Airplay, (network sources), Bluetooth, AUX ❑ Extended Surround (EXTD) ■ Tone Control (Tone Control) (RX-V579 only) Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds. Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used. Choices Treble (Treble), Bass (Bass) The system (5.1-channel system) which does not use surround back speakers reproduces 5.1- to 7.1-channel signals using the Virtual Surround Back Speaker (VSBS) function. In this case, select “Auto” or “EX/ES”. Setting range -6.0 dB to Bypass (Bypass) to +6.0 dB (0.5 dB increments) Settings • You can also adjust the tone with the front panel controls. Press TONE CONTROL to select “Treble” or “Bass”, then press PROGRAM to make an adjustment. Auto (Auto) Automatically selects the most suitable decoder if signals that contain surround back channel signals are input, and reproduces the signals in 6.1- or 7.1-channel. If two surround back speakers are connected, the unit reproduces the 5.1-channel signals in 7.1-channel. • If you set an extreme value, sounds may not match those from other channels. bPLIIx Movie (bPLIIxMo) Always reproduces signals in 7.1-channel using the Dolby Pro Logic IIx decoder. This setting is available only when two surround back speakers are connected. bPLIIx Music (bPLIIxMu) Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro Logic IIx Music decoder. This setting is available only when one or two surround back speakers are connected. En 73 00_RX-V479_V579_om_U.book Page 74 Wednesday, March 25, 2015 9:59 AM EX/ES (EX/ES) Automatically selects the Dolby EX or DTS-ES decoder, and reproduces signals in 6.1- or 7.1-channel. Off (Off) Always reproduces signals in their original channels. (Even when DTS-ES or Dolby Digital Surround EX signal is input, the unit reproduces the signal in 5.1-channel.) ❑ Subwoofer Trim (SW.Trim) Fine-adjusts the subwoofer volume. Setting range -6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments) ■ Lipsync (Lipsync) • Some early Dolby Digital Surround EX or DTS-ES sources do not contain a flag for reproducing surround back channel. We recommend you set “Extended Surround” to “bPLIIx Movie” or “EX/ES” when playing back those sources. Enables/disables the adjustment configured in “Lipsync” (p.87) in the “Setup” menu. ❑ Enhancer (Enhancer) • This setting is applied separately to each input source. Settings Enables/disables Compressed Music Enhancer (p.48). • This setting is applied separately to each input source. • You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer (p.48). Disables Compressed Music Enhancer. On (On) Enables Compressed Music Enhancer. Disables the “Lipsync” adjustment. On (On) Enables the “Lipsync” adjustment. Default AirPlay: Off (Off) Others: On (On) Settings Off (Off) Off (Off) ■ Signal Info (Signal Info) Displays information about the video/audio signal. Default TUNER, USB, SERVER, NET RADIO, AirPlay (network sources), Bluetooth: On (On) Others: Off (Off) Choices ■ Volume Trim (Volume Trim) Fine-adjusts volume difference between input sources or subwoofer volume. ❑ Input Trim (In.Trim) Corrects volume differences between input sources. If you are bothered by volume differences when switching between input sources, use this function to correct it. • This setting is applied separately to each input source. Format (FORMAT) Audio format of the input signal Channel (CHANNEL) The number of source channels in the input signal (front/surround/LFE) For example, “3/2/0.1” means 3 front channels, 2 surround channels, and LFE. Sampling (SAMPLING) The number of samples per second of the input digital signal Bitrate (BITRATE) The amount of data per second of the input bitstream signal Video In (VIDEO IN) Type and resolution of the input digital signal Video Out (VIDEO OUT) Type and resolution of the output digital signal Setting range -6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments) • To switch the information on the front display, press the cursor keys (q/w) repeatedly. En 74 06_playback.fm Page 75 Monday, April 13, 2015 9:14 AM ■ Audio In (Audio) ■ Volume Interlock (Interlock) Combines the video jack of the selected input source (HDMI 1-6 or AV 1-6) with an audio jack of others. For example, use this function in the following cases. Enables/disables volume controls from iTunes/iPod via AirPlay. Settings • Connecting a playback device that supports HDMI video output, but not HDMI audio output • Connecting a playback device that has component video jacks and analog stereo jacks (such as game consoles) Input sources (RX-V579) HDMI 1-6, AV 1-6 Input sources (RX-V479) HDMI 1-6, AUDIO 1-2, AV 1-4 ■ Setup procedure See “Changing the combination of video/audio input jacks” (p.22). ■ Video Out (Video) Selects a video to be output with the selected audio source. For example, you can watching the video while listening to the radio. Input sources TUNER, USB, Bluetooth, AUX Settings Off (Off) Does not output video. HDMI 1-6, AV 1-6 (RX-V579), AV 1-4 (RX-V479) Outputs video input through the corresponding video input jacks. En 75 Off (Off) Disables volume controls from iTunes/iPod. Limited (Ltd) Enables volume controls from iTunes/iPod within the limited range (-80 dB to -20 dB and mute). Full (Full) Enables volume controls from iTunes/iPod in the full range (-80 dB to +16.5 dB and mute). 00_RX-V479_V579_om_U.book Page 76 Wednesday, March 25, 2015 9:59 AM CONFIGURATIONS Configuring various functions (Setup menu) You can configure the unit’s various function with the menu displayed on the TV screen. • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. 4 5 • If new firmware is available, the envelope icon (p) appears in the screen. 1 2 Press SETUP. Use the cursor keys to select a menu and press ENTER. Setup Speaker Configuration HDMI Distance Sound Level ECO Equalizer Function Test Tone Network Bluetooth Language 3 Use the cursor keys to select an item and press ENTER. Setup Speaker Configuration HDMI Distance Sound Level ECO Equalizer Function Test Tone Network Bluetooth Language • To return to the previous screen during menu operations, press RETURN. En 76 Use the cursor keys (e/r) to select a setting and press ENTER. To exit from the menu, press SETUP. 00_RX-V479_V579_om_U.book Page 77 Wednesday, March 25, 2015 9:59 AM Setup menu items Menu Item Function Page Power Amp Assign (RX-V579 only) Selects a speaker system. 80 Subwoofer Selects whether or not a subwoofer is connected. 80 Front Selects the size of the front speakers. 80 Center Selects whether or not a center speaker is connected and its size. 80 Surround Selects whether or not surround speakers are connected and their size. 81 Surround Back (RX-V579 only) Selects whether or not surround back speakers are connected and their size. 81 Crossover Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 81 Subwoofer Phase Sets the phase of the subwoofer. 81 Extra Bass Enables/disables Extra Bass. 81 Virtual CINEMA FRONT Configuration Speaker Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration. 82 Distance Sets the distance between each speaker and listening position. 82 Level Adjusts the volume of each speaker. 82 Equalizer Adjusts the tone with an equalizer. 82 Enables/disables the test tone output. 83 HDMI Control Enables/disables HDMI Control. 84 Audio Output Selects a device to output audio. 84 Standby Through Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 84 TV Audio Input Selects an audio input jack of the unit to be used for TV audio input. 84 Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit. 85 ARC Enables/disables ARC. 85 SCENE Enables/disables SCENE link playback. 85 Test Tone HDMI Configuration En 77 00_RX-V479_V579_om_U.book Page 78 Wednesday, March 25, 2015 9:59 AM Menu Item Page Enables/disables CINEMA DSP 3D. Panorama Enables/disables the broadening effect of the front sound field. 86 Center Width Adjusts the broadening effect of the center sound field. 86 Dimension Adjusts the difference in level between the front and surround sound fields. 86 Center Image Adjusts the center orientation level (broadening effect) of the front sound field. 86 Select Selects the method to adjust the delay between video and audio output. 87 Adjustment Adjusts the delay between video and audio output manually. 87 Scale Switches the scale of the volume display. 87 Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 87 Max Volume Sets the maximum volume to prevent excessive loudness. 87 Initial Volume Sets the initial volume for when this receiver is turned on. 87 ZoneB Volume (RX-V579 only) Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A. 88 Auto Power Standby Set the amount of time for the auto-standby function. 89 ECO Mode Enables/disables the eco mode (power saving mode). 89 DSP Parameter Sound Function CINEMA DSP 3D Mode 86 Lipsync Volume ECO Function Input Rename Changes the input source name displayed on the front display. 90 Input Skip Set which input source is skipped when operating the INPUT key. 90 Dimmer Adjusts the brightness of the front display. 90 Memory Guard Prevents accidental changes to the settings. 90 Remote Color Key Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control. 91 Information Displays the network information on the unit. 92 Network Connection Selects the network connection method. 92 IP Address Configures the network parameters (such as IP address). 92 MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 93 DMC Control Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback. 93 Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 93 Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 93 Network Update Updates the firmware via the network. 94 Network En 78 00_RX-V479_V579_om_U.book Page 79 Wednesday, March 25, 2015 9:59 AM Menu Bluetooth Item Function Bluetooth Enables/disables the BLUETOOTH functions. Audio Receive Bluetooth Standby Language Disconnect Page 94 Terminates the BLUETOOTH connection between the BLUETOOTH device (such as smartphones) and the unit. 53 Selects whether to enable/disable the function that turns on the unit from BLUETOOTH devices (BLUETOOTH standby). 94 Select an on-screen menu language. 95 En 79 00_RX-V479_V579_om_U.book Page 80 Wednesday, March 25, 2015 9:59 AM Speaker Configures the speaker settings manually. Front Selects the size of the front speakers. • Default settings are underlined. Settings ■ Configuration Configures the output characteristics of the speakers. • When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm (6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”). Small Select this option for small speakers. The subwoofer will produce front channel low-frequency components (configurable in “Crossover”). Large Select this option for large speakers. The front speakers will produce all of the front channel frequency components. Power Amp Assign • “Front” is automatically set to “Large” when “Subwoofer” is set to “None”. (RX-V579 only) Selects a speaker system. Center In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations are possible using the Zone B speakers or bi-amp connection. Selects whether or not a center speaker is connected and its size. Settings Settings Basic Select this option when you use a normal speaker system (not using Zone B speakers or a bi-amp connection). BI-AMP Select this option when you connect front speakers that support bi-amp connections (p.17). Zone B Select this option when you use Zone B speakers (p.68) in addition to the speaker system in the main zone (Zone A). Subwoofer Selects whether or not a subwoofer is connected. Settings Use Select this option when a subwoofer is connected. The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. None Select this option when no subwoofer is connected. The front speakers will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. En 80 Small Select this option for small speakers. The subwoofer or front speakers will produce center channel low-frequency components (configurable in “Crossover”). Large Select this option for large speakers. The center speaker will produce all of the center channel frequency components. None Select this option when no center speaker is connected. The front speakers will produce center channel audio. 00_RX-V479_V579_om_U.book Page 81 Wednesday, March 25, 2015 9:59 AM Surround Crossover Selects whether or not surround speakers are connected and their sizes. Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to “Small”. A frequency sound lower than the specified value will be produced from the subwoofer or front speakers. Settings Small Select this option for small speakers. The subwoofer or front speakers will produce surround channel low-frequency components (configurable in “Crossover”). Settings 40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz Large Select this option for large speakers. The surround speakers will produce all of the surround channel frequency components. • If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and crossover frequency to maximum. None Select this option when no surround speakers are connected. The front speakers will produce surround channel audio. Virtual CINEMA DSP works when you select a sound program. Subwoofer Phase Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the subwoofer phase. Surround Back Settings (RX-V579 only) Selects whether or not surround back speakers are connected and their sizes. Normal Does not reverse the subwoofer phase. Reverse Reverses the subwoofer phase. Settings Small x1 Select this option when one small speaker is connected. The subwoofer or front speakers will produce surround back channel low-frequency components (configurable in “Crossover”). Small x2 Select this option when two small speakers are connected. The subwoofer or front speakers will produce surround back channel low-frequency components (configurable in “Crossover”). Large x1 Select this option when one large speaker is connected. The surround back speaker will produce all of the surround back channel frequency components. Large x2 Select this option when two large speakers are connected. The surround back speakers will produce all of the surround back channel frequency components. None Select this option when no surround back speakers are connected. The surround speakers and subwoofer (or front speakers) will produce surround back channel audio. Extra Bass Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. Settings Off Disables Extra Bass. On Enables Extra Bass. • You can also use BASS on the remote control to enable/disable Extra Bass (p.48). • “Surround Back” is automatically set to “None” when “Power Amp Assign” is set to “BI-AMP” or “Zone B”, or when “Surround” is set to “None”. • “Surround Back” is not available when “Virtual CINEMA FRONT” is set to “On”. En 81 00_RX-V479_V579_om_U.book Page 82 Wednesday, March 25, 2015 9:59 AM ■ Equalizer Virtual CINEMA FRONT Adjusts the tone with an equalizer. Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration. EQ Select Settings Selects the type of equalizer to be used. Off Disables the front 5-channel speaker configuration. On Enables the front 5-channel speaker configuration. Settings • Select “On” only when utilizing the Virtual CINEMA FRONT configuration (p.13). • This setting is not available when “Surround” is set to “None”. PEQ Applies the parametric equalizer values obtained by the YPAO measurement (p.28). GEQ Select this option when you want to adjust the equalizer manually. For details, see “Manual equalizer adjustment”. Off Does not use the equalizer. ■ Distance Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”. • “PEQ” is available only when the YPAO has been performed (p.28). ■ Manual equalizer adjustment Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L (RX-V579 only), Surround Back R (RX-V579 only), Subwoofer 1 2 Set “EQ Select” to “GEQ”. Setting range 0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments 3 Use the cursor keys (q/w) to select the desired band (frequency) and the cursor keys (e/r) to adjust the gain. Default Front L, Front R, Subwoofer: 3.00 m (10.0 ft) Center: 2.60 m (8.6 ft) Others: 2.40 m (8.0 ft) Use the cursor keys (q/w) to select “Channel” and the cursor keys (e/r) to select the desired speaker channel. Setting range -6.0 dB to +6.0 dB Equalizer ■ Level EQ Select GEQ Edit Channel 63Hz 160Hz Adjusts the volume of each speaker. 400Hz 1kHz 2.5kHz 6.3kHz 16kHz Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L (RX-V579 only), Surround Back R (RX-V579 only), Subwoofer Setting range -10.0 dB to +10.0 dB (0.5 dB increments) 4 Default Front L, Front R, Subwoofer: 0.0 dB Others: -1.0 dB En 82 GEQ Front L Back:RETURN To exit from the menu, press SETUP. 00_RX-V479_V579_om_U.book Page 83 Wednesday, March 25, 2015 9:59 AM ■ Test Tone Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Settings Off Does not output test tones. On Outputs test tones automatically when you adjust the speaker balance or equalizer. En 83 00_RX-V479_V579_om_U.book Page 84 Wednesday, March 25, 2015 9:59 AM HDMI Configures the HDMI settings. Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. If this function is set to “On” or “Auto”, you can use the input selection keys (HDMI 1–6) to select an HDMI input even when the unit is in standby mode (the standby indicator on the unit blinks). • Default settings are underlined. ■ Configuration Settings HDMI Control Enables/disables HDMI Control (p.114). Settings Off Disables HDMI Control. On Enables HDMI Control. Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”, and “SCENE”. Off (When “HDMI Control” is set to “Off”) Does not output videos/audio to the TV. Auto Automatically selects whether to output videos/audio depending on the status of the connected device. On Outputs videos/audio to the TV. (The unit consumes more power than when “Off” is selected.) TV Audio Input Selects an audio input jack of the unit to be used for TV audio input when “HDMI Control” is set to “On”. The unit’s input source automatically switches to TV audio when the TV input is switched to its built-in tuner. • To use HDMI control, you need to perform the HDMI Control link setup (p.114) after connecting HDMI Control-compatible devices. Settings (RX-V579) AV 1–6 (RX-V479) AUDIO 1–2, AV 1–4 Audio Output Selects a device to output audio. Default (RX-V579) AV4 (RX-V479) AV2 • This setting is available only when “HDMI Control” is set to “Off”. Amp Enables/disables the audio output from the speakers connected to the unit. • When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an external device because the input will be used for TV audio input. Settings Off Disables the audio output from the speakers. On Enables the audio output from the speakers. HDMI OUT (TV) Enables/disables the audio output from a TV connected to the HDMI OUT jack. Settings Off Disables the audio output from the TV. On Enables the audio output from the TV. En 84 00_RX-V479_V579_om_U.book Page 85 Wednesday, March 25, 2015 9:59 AM Standby Sync • SCENE link playback may not work properly due to the compatibility between devices. We recommend using TV and playback devices from the same manufacturer so that HDMI Control works more effectively. Select whether to use HDMI control to link the standby behavior of the TV and the unit when “HDMI Control” is set to “On”. Settings Off Does not set the unit to standby mode when the TV is turned off. On Sets the unit to standby mode when the TV is turned off. Auto Sets the unit to standby mode when the TV is turned off only when the unit is receiving TV audio or HDMI signals. ARC Enables/disables ARC (p.19) when “HDMI Control” is set to “On”. Settings Off Disables ARC. On Enables ARC. • You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use the TV’s speakers. SCENE Enables/disable SCENE link playback when “HDMI Control” is set to “On”. When SCENE link playback is enabled, HDMI Control-compatible devices connected to the unit via HDMI automatically works as follows, with a scene selection. • TV: turning on and displaying video from the playback device • Playback device: starting playback Choices (SCENE keys) BD/DVD, TV, NET, RADIO Settings Off Disables SCENE link playback for the selected SCENE key. On Enables SCENE link playback for the selected SCENE key. Default BD/DVD, TV: On NET, RADIO: Off En 85 00_RX-V479_V579_om_U.book Page 86 Wednesday, March 25, 2015 9:59 AM Sound Configures the audio output settings. Dimension Adjusts the difference in level between the front and surround sound fields. Higher to strengthen the front sound field and lower to strengthen the surround sound field. This setting is effective when “bPLII Music” or “bPLIIx Music” (RX-V579 only) is selected. • Default settings are underlined. ■ DSP Parameter Configures the surround decoder settings. Setting range -3 to 0 to +3 CINEMA DSP 3D Mode Center Image Enables/disables CINEMA DSP 3D (p.45). If this function is set to “On”, CINEMA DSP 3D functions with the selected sound programs (except 2ch Stereo and 7ch/5ch Stereo). Adjusts the center orientation level (broadening effect) of the front sound field. Higher to strengthen the center orientation level (less broadening effect) and lower to weaken (more broadening effect). This setting is effective when “Neo:6 Music” is selected. Settings Off Disables CINEMA DSP 3D. On Enables CINEMA DSP 3D. Setting range 0.0 to 0.3 to 1.0 Panorama Enables/disables the broadening effect of the front sound field. When this function is enabled, you can wrap front left/right channel sounds around the field and generate a spacious sound field in combination with the surround sound field. This setting is effective when “bPLII Music” or “bPLIIx Music” (RX-V579 only) is selected. Settings Off Disables the broadening effect of the front sound field. On Enables the broadening effect of the front sound field. Center Width Adjusts the broadening effect of the center sound field. Higher to enhance the broadening effect, and lower to reduce it (closer to center). This setting is effective when “bPLII Music” or “bPLIIx Music” (RX-V579 only) is selected. Setting range 0 to 3 to 7 En 86 00_RX-V479_V579_om_U.book Page 87 Wednesday, March 25, 2015 9:59 AM ■ Lipsync ■ Volume Adjusts the delay between video and audio output. Configures the volume settings. Scale • You can enable/disable the Lipsync function by input sources in “Lipsync” (p.74) in the “Option” menu. Switches the scale of the volume display. Select Settings Selects the method to adjust the delay between video and audio output. dB Displays the volume in the “dB” unit. Setting range 0-97 Displays the volume in the numeric value (0.5 to 97.0). Manual Select this option when you want to adjust the delay between video and audio output manually. Adjust the audio output timing in “Adjustment”. Auto Adjusts the delay between video and audio output automatically when a TV that supports an automatic lipsync function is connected to the unit via HDMI. If necessary, you can fine-adjust the audio output timing in “Adjustment”. Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. Settings Maximum Optimizes the dynamic range for regular home use. Min/Auto Sets the dynamic range for clear sound even at night or at low volumes. When playing back Dolby TrueHD signals, the dynamic range is automatically adjusted based on the input signal information. • “Select” is automatically set to “Manual” depending on the TV connected to the unit. Adjustment Adjusts the delay between video and audio output manually when “Select” is set to “Manual”. You can fine-adjust the audio output timing when “Select” is set to “Auto”. Produces audio without adjusting the dynamic range. Standard Max Volume Sets the maximum volume to prevent excessive loudness. Setting range 0 ms to 500 ms (1 ms increments) Setting range -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [50.0 to 95.0 (5.0 increments), 97.0] Initial Volume Sets the initial volume when the receiver is turned on. Settings Off Sets the level to the volume level of the unit when it last entered standby mode. Mute Sets the unit to mute the audio output. -80.0 dB to +16.5 dB (0.5 dB increments) Sets the level to the specified volume level. [0.5 to 97.0 (0.5 increments)] En 87 00_RX-V479_V579_om_U.book Page 88 Wednesday, March 25, 2015 9:59 AM ZoneB Volume (RX-V579 only) Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A. Settings Sync. Adjusts the volume for Zone B in conjunction with the volume for Zone A. Async. Does not adjust the volume for Zone B in conjunction with the volume for Zone A. Adjust the volume for Zone B separately (p.69). • If “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB. As necessary, adjust the volume using the remote control (p.69). En 88 00_RX-V479_V579_om_U.book Page 89 Wednesday, March 25, 2015 9:59 AM ECO Configures the power supply settings. • Default settings are underlined. ■ Auto Power Standby Set the amount of time for the auto-standby function. Settings Off Does not set the unit to standby mode automatically. 20 minutes Sets the unit to standby mode when you have not operated the unit and the unit has not detected any input signal for the specified time. 2 hours, 4 hours, 8 hours, 12 hours Sets the unit to standby mode when you have not operated the unit for the specified time. Default U.K. and Europe models: 20 minutes Other models: Off • Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front display. ■ ECO Mode Enables/disables the eco (power saving) mode. When the eco mode is enabled, you can reduce the unit’s power consumption. Settings Off Disables the eco mode. On Enables the eco mode. • Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect after the unit is restarted. • When “ECO Mode” is set to “On”, the front panel display may become dark. • If you want to play audio at high volume, set “ECO Mode” to “Off”. En 89 07_config.fm Page 90 Thursday, March 26, 2015 7:13 PM Function Configures the functions that make the unit easier to use. 6 To exit from the menu, press SETUP. ■ Input Skip • Default settings are underlined. Set which input source is skipped when operating the INPUT key. ■ Input Rename You can select the desired input source quickly by skipping unnecessary input sources. Changes the input source name displayed on the front display. You can also select a name from the presets or a name created by the Auto Rename function. Input sources (RX-V579) HDMI 1–6, AV 1–6, TUNER, USB, NET, Bluetooth, AUX (RX-V479) HDMI 1–6, AUDIO 1–2, AV 1–4, TUNER, USB, NET, Bluetooth, AUX Input sources (RX-V579) HDMI 1–6, AV 1–6, USB, Bluetooth, AUX (RX-V479) HDMI 1–6, AUDIO 1–2, AV 1–4, USB, Bluetooth, AUX Settings Default HDMI 1–6: Auto Others: Manual (For USB, Bluetooth, AUX only “Manual” can be selected.) 3 Does not skip the selected input source. On Skips the selected input source. ■ Dimmer ■ Procedure 1 2 Off Adjusts the brightness of the front display. Use the cursor keys (q/w) to select an input source to be renamed. Setting range -4 to 0 (higher to brighten) Use the cursor keys (e/r) to select “Manual” and press ENTER. • To select a name from the presets, after selecting “Manual”, use the cursor keys (e/r) to select a preset name. • The front display may become dark when “ECO Mode” (p.89) is set to “On”. • When selecting “Auto”, the unit creates a name automatically according to the connected device. You can check a created name by pressing ENTER. ■ Memory Guard • During selecting “Auto”, the created name is saved even after the device connection is terminated. To reset to the default setting, switch the setting to “Manual” at once and then set it again to “Auto”. Prevents accidental changes to the settings. Settings Press ENTER. The edit screen is displayed. Off Does not protect the settings. On Protects the settings until “Off” is selected. Input Rename HDMI ( . 0 ← a n ) , 1 A b o • When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen. [ ] { } < > * ! : ; _ | / \ $ 2 3 4 5 6 7 8 a B K S P S p a c e c d e f g h i p q r s t u v ? # % & ~ ^ ´ ’ ` 9 + - = D E L → j k l m w x y z Memory Guard OK CANCEL CLEAR 4 Use the cursor keys and ENTER key to edit the name, and then select “OK” to confirm the new name. 5 To change another input source name, repeat steps 1 to 4. Memory Guard Back:RETURN En 90 o On Icon 00_RX-V479_V579_om_U.book Page 91 Wednesday, March 25, 2015 9:59 AM ■ Remote Color Key Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control. Settings Default Assigns the functions of playback devices connected to the unit with an HDMI cable. Input Assigns the unit's input sources to each key. The assigned input sources can be set separately. Input sources (RX-V579) HDMI 1–6, AV 1–6, TUNER, USB, NET, Bluetooth, AUX (RX-V479) HDMI 1–6, AUDIO 1–2, AV 1–4, TUNER, USB, NET, Bluetooth, AUX Default RED: HDMI 2, GREEN: HDMI 6, YELLOW: AV 2, BLUE: AUX Program Assigns the functions of sound mode to each key. RED: MOVIE GREEN: MUSIC YELLOW: STEREO BLUE: SUR.DECODE For example, if you press the RED key repeatedly, you can select your favorite sound program from the sound programs (MOVIE) (p.45) suitable for the video source. En 91 00_RX-V479_V579_om_U.book Page 92 Wednesday, March 25, 2015 9:59 AM Network ■ IP Address Configures the network settings. Configures the network parameters (such as IP address). • Default settings are underlined. DHCP ■ Information Select whether to use a DHCP server. Displays the network information on the unit. Settings Status The connection status of the NETWORK jack Connection Connection method SSID The access point to which the unit is connected Security The encryption method for your network MAC address IP address Subnet mask Default Gateway The IP address of the default gateway DNS Server (P) The IP address of the primary DNS server DNS Server (S) The IP address of the secondary DNS server vTuner ID The ID of the Internet radio (vTuner) On Uses a DHCP server to automatically obtain the unit’s network parameters (such as IP address). 1 2 MAC Address (Wi-Fi) Subnet Mask Does not use a DHCP server. Configure the network parameters manually. For details, see “Manual network settings”. ■ Manual network settings MAC Address (Ethernet) IP Address Off ■ Network Connection Wired Select this option when you want to connect the unit to a network with a commercially-available network cable. Wireless (Wi-Fi) Select this option when you want to connect the unit to a network via the wireless router (access point). For details on settings, see “Connecting the unit to a wireless network” (p.33). Wireless Direct Select this option when you want to connect a mobile device to the unit directly. For details on settings, see “Connecting a mobile device to the unit directly (Wireless Direct)” (p.40). En 92 Use the cursor keys (q/w) to select a parameter type. IP Address Specifies an IP address. Subnet Mask Specifies a subnet mask. Default Gateway Specifies the IP address of the default gateway. DNS Server (P) Specifies the IP address of the primary DNS server. DNS Server (S) Specifies the IP address of the secondary DNS server. 3 Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value. 4 To exit from the menu, press SETUP. Selects the network connection method. Choices Set “DHCP” to “Off”. 00_RX-V479_V579_om_U.book Page 93 Wednesday, March 25, 2015 9:59 AM ■ MAC Address Filter ■ Network Standby Sets the MAC address filter to limit access to the unit from other network devices. Selects whether the unit can be turned on from other network devices (network standby). Settings • Operation of the AirPlay function (p.57) or the DMC is not limited by this setting. Off Disables the network standby function. On Enables the network standby function. (The unit consumes more power than when “Off” is selected.) Auto Enables the network standby function. (If “Network Connection” is set to “Wired”, the unit is set to the power saving mode when the network cable is disconnected.) Filter Enables/disables the MAC address filter. Settings Off Disables the MAC address filter. On Enables the MAC address filter. In “MAC Address 1–10”, specify the MAC addresses of the network devices that will be permitted access to the unit. ■ Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. MAC Address 1–10 ■ Procedure Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to the unit when “Filter” is set to “On”. 1 2 ■ Procedure 1 2 Use the cursor keys (q/w) to select an MAC address number (1 to 10). 3 To exit from the menu, press SETUP. Press ENTER to enter the name edit screen. Use the cursor keys and ENTER key to edit the name, and then select “OK” to confirm the new name. Network Name Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value. Y a m a h a ( . 0 ← a n ■ DMC Control ) , 1 A b o [ x x x x x x _ ] { } < > * ! : ; _ | / \ $ 2 3 4 5 6 7 8 a B K S P S p a c e c d e f g h i p q r s t u v ? # % & ~ ^ ´ ’ ` 9 + - = D E L → j k l m w x y z OK CANCEL CLEAR Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback. 3 Settings Disable Does not allow DMCs to control playback. Enable Allows DMCs to control playback. • A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on the same network. En 93 To exit from the menu, press SETUP. 00_RX-V479_V579_om_U.book Page 94 Wednesday, March 25, 2015 9:59 AM ■ Network Update Bluetooth Updates the firmware via the network. Configures the BLUETOOTH settings. Perform Update ■ Bluetooth Starts the process to update the unit’s firmware. For details, see “Updating the unit’s firmware via the network” (p.99). Enables/disables the BLUETOOTH function (p.53). Settings Firmware Version Displays the version of the firmware installed on the unit. Off Disables the BLUETOOTH function. On Enables the BLUETOOTH function. System ID ■ Bluetooth Standby Displays the system ID number. Selects whether to enable/disable the function that turns on the unit from BLUETOOTH devices (BLUETOOTH standby). If this function is set to “On”, the unit automatically turns on when a connect operation is performed on the BLUETOOTH device. Settings Off Disables the BLUETOOTH standby function. On Enables the BLUETOOTH standby function. (The unit consumes more power than when “Off” is selected.) • This setting is not available when “Network Standby” (p.93) is set to “Off”. En 94 00_RX-V479_V579_om_U.book Page 95 Wednesday, March 25, 2015 9:59 AM Language Select an on-screen menu language. • Default settings are underlined. Settings English English 日本語 Japanese Français French Deutsch German Español Spanish Русский Russian Italiano Italian 中文 Chinese • Japanese and Chinese characters used in content information (such as song titles) cannot be displayed. • The information on the front display is provided in English only. En 95 00_RX-V479_V579_om_U.book Page 96 Wednesday, March 25, 2015 9:59 AM Configuring the system settings (ADVANCED SETUP menu) ADVANCED SETUP menu items Configure the system settings of the unit while viewing the front display. 1 2 Set the unit to standby mode. • Default settings are underlined. While holding down STRAIGHT on the front panel, press z (power). z (power) PROGRAM 3 4 5 Item Function SP IMP. (U.S.A. and Canada models only) Changes the speaker impedance setting. 96 REMOTE ID Selects the unit’s remote control ID. 97 TU (Asia, Taiwan and General models only) Changes the FM/AM tuning frequency setting. 97 TV FORMAT Switches the video signal type of HDMI output. 97 INIT Restores the default settings. 97 UPDATE Updates the firmware. 98 VERSION Checks the version of firmware currently installed on the unit. 98 STRAIGHT Press PROGRAM to select an item. Press STRAIGHT to select a setting. Page Press z (power) to set the unit to standby mode and turn it on again. Changing the speaker impedance setting (SP IMP.) The new settings take effect. (U.S.A. and Canada models only) ENHANCER STEREO TUNED CHARGE OUT SLEEP MUTE VOL. ECO SP IMP.••8¬MIN ADAPTIVE DRC VIRTUAL Change the unit’s speaker impedance settings depending on the impedance of the speakers connected. Settings En 96 6 Ω MIN Select this option when you connect 6-ohm speakers to the unit. 8 Ω MIN Select this option when you connect 8-ohm or higher speakers to the unit. 00_RX-V479_V579_om_U.book Page 97 Wednesday, March 25, 2015 9:59 AM Selecting the remote control ID (REMOTE ID) Switching the video signal type (TV FORMAT) ENHANCER STEREO TUNED CHARGE ENHANCER STEREO TUNED CHARGE OUT SLEEP MUTE OUT REMOTE ID••ID1 TV FORMAT•NTSC ADAPTIVE DRC VIRTUAL ADAPTIVE DRC VIRTUAL Switch the video signal type of HDMI output so that it matches to the format of your TV. Change the unit’s remote control ID so that it matches the remote control’s ID (default: ID1). When using multiple Yamaha AV receivers, you can set each remote control with a unique remote control ID for its corresponding receiver. Since the unit automatically selects the video signal type so that it matches to the TV, it is unnecessary to change the setting normally. Change the setting only when images on the TV screen do not appear correctly. Settings ID1, ID2 Settings NTSC, PAL ■ Changing the remote control ID of the remote control 1 SLEEP MUTE VOL. ECO VOL. ECO Default U.S.A., Canada, Korea, Taiwan and General models: NTSC Other models: PAL To select ID1, while holding down the cursor key (e), hold down SCENE (BD/DVD) for more than 3 seconds. To select ID2, while holding down the cursor key (e), hold down SCENE (TV) for more than 3 seconds. Restoring the default settings (INIT) Changing the FM/AM tuning frequency setting (TU) ENHANCER STEREO TUNED CHARGE OUT SLEEP MUTE VOL. ECO INIT••••CANCEL (Asia, Taiwan and General models only) ADAPTIVE DRC VIRTUAL Restores the default settings for the unit. ENHANCER STEREO TUNED CHARGE OUT SLEEP MUTE Choices VOL. ECO TU••••FM50/AM9 ADAPTIVE DRC VIRTUAL Change the FM/AM tuning frequency setting of the unit depending on your country or region. Settings FM100/AM10 Select this when you want to adjust the FM frequency by 100-kHz steps and AM by 10-kHz steps. FM50/AM9 Select this when you want to adjust the FM frequency by 50-kHz steps and AM by 9-kHz steps. En 97 ALL Restores the default settings for the unit. CANCEL Does not perform an initialization. 00_RX-V479_V579_om_U.book Page 98 Wednesday, March 25, 2015 9:59 AM Updating the firmware (UPDATE) ENHANCER STEREO TUNED CHARGE OUT SLEEP MUTE VOL. ECO UPDATE•••••USB ADAPTIVE DRC VIRTUAL New firmware that provides additional features or product improvements will be released as needed. Updates can be downloaded from our website. If the unit is connected to the Internet, you can download the firmware via the network. For details, refer to the information supplied with updates. ■ Firmware update procedure Do not perform this procedure unless firmware update is necessary. Also, make sure you read the information supplied with updates before updating the firmware. 1 Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to start firmware update. Choices USB Update the firmware using a USB memory device. NETWORK Update the firmware via the network. Checking the firmware version (VERSION) CHARGE OUT ECO ENHANCER STEREO TUNED SLEEP MUTE VOL. VERSION••xx.xx ADAPTIVE DRC VIRTUAL Check the version of firmware currently installed on the unit. • You can also check the firmware version in “Network Update” (p.94) in the “Setup” menu. • It may take a while until the firmware version is displayed. En 98 00_RX-V479_V579_om_U.book Page 99 Wednesday, March 25, 2015 9:59 AM Updating the unit’s firmware via the network ZONE A ZONE B SLEEP New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS 3 If “UPDATE SUCCESS PLEASE POWER OFF!” appears on the front display, press z (power) on the front panel. PROGRAM The firmware update is complete. Note • Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20 minutes or more (depending on your Internet connection speed). FM/AM USB INPUT • If the Internet connection speed is slow, or the unit is connected to the wireless network, network update may not be possible depending on the condition of the wireless connection. In this case, update the firmware using the USB memory device (p.98). VOLUME NET BLUETOOTH MUTE SETUP SETUP RETURN TOP MENU RED • For details on update, visit the Yamaha website. OOPTION PTION ENTER Cursor Cursor keys keys ENTER DISPLAY A HOME GREEN YELLOW L • To perform the following procedure, your TV must be connected to the unit via HDMI. If not, perform the update from the “ADVANCED SETUP” menu (p.98). POP-UP/MENU • You can also update the firmware using the USB memory device from the “ADVANCED SETUP” menu (p.98). A firmware update is available if the following message is displayed after SETUP is pressed. BLUE MEMORY TUNING Network Update TUNING New firmware available. Press ENTER to update now. PRESET (You can also start the update from the “Setup-Network” screen.) Language CANCEL : RETURN English You can switch the language. 1 2 Read the on-screen description and press ENTER. To start the firmware update, press ENTER. The on-screen display turns off. En 99 00_RX-V479_V579_om_U.book Page 100 Wednesday, March 25, 2015 9:59 AM APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... I want to change the input source name... By default, input source names (such as “HDMI 1” and “AV 1”) are displayed on the front display when an input source is selected. If you want to rename them as you like, use “Input Rename” (p.90) in the “Setup” menu. You can also select a name from the presets (such as “Blu-ray” and “DVD”). If you have changed speakers or have a new speaker system, use YPAO to optimize the speaker settings again (p.28). If you want to adjust the speaker settings manually, use “Speaker” in the “Setup” menu (p.80). I want to prevent accidental changes to the settings... We want to set limitations on the volume control... You can protect the settings configured on the unit (such as speaker settings) by utilizing “Memory Guard” in the “Setup” menu (p.90). If a small child accidentally operates the controls on the main unit or remote control, the volume may suddenly increase. This may also cause injury or damage the unit or speakers. We recommend using “Max Volume” in the “Setup” menu to set the maximum volume level for the unit in advance (p.87). The unit’s remote control is simultaneously controlling another Yamaha product as well as the unit... I want to fix the volume when turning on the unit... When using multiple Yamaha products, the remote control may work on another Yamaha product or another remote control may work on the unit. If this happens, register different remote control IDs for the devices that you want to control with each remote control (p.97). By default, the volume level when the unit last entered standby mode is automatically applied. If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the volume to be applied when the receiver is turned on (p.87). The volume varies depending on the input sources... I want to enjoy videos/audio played back on the video device even when the unit is in standby mode… You can correct volume differences between input sources by utilizing “Input Trim” in the “Option” menu (p.74). If you have connected a video device to the unit with HDMI, you can output videos/audio played back on the video device to the TV even when the unit is in standby mode. To use this function, set “Standby Through” (p.84) in the “Setup” menu to “On” or “Auto”. You can also switch the input source using the remote control of the unit when this function is enabled. HDMI Control does not work at all... To use HDMI Control, you need to perform the HDMI Control link setup (p.114). After connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit, enable HDMI Control on each device and perform the HDMI Control link setup. This setup is required every time you add a new HDMI Control-compatible device to your system. For information on how HDMI Control works between your TV and playback devices, refer to the instruction manuals for each device. En 100 00_RX-V479_V579_om_U.book Page 101 Wednesday, March 25, 2015 9:59 AM The combination of video/audio input jacks does not match an external device... Use “Audio In” in the “Option” menu to change the combination of video/audio input jacks so that it matches the output jack(s) of your external device (p.22). Video and audio are not synchronized... Use “Lipsync” in the “Setup” menu to adjust the delay between video and audio output (p.87). I want to hear audio from the TV speakers... Use “Audio Output” in the “Setup” menu to select the output destination of signals input into the unit (p.84). Your TV speakers may be selected as an output destination. I want to change the on-screen menu language... Use “Language” in the “Setup” menu to select a language from English, Japanese, French, German, Spanish, Russian, Italian and Chinese (p.27). I want to update the firmware... Use “UPDATE” in the “ADVANCED SETUP” menu to update the unit’s firmware (p.98). I want to customize the unit... Various functions to customize the unit are available. • SCENE settings (p.43) • Sound/video settings and signal information for each source (p.72) • Various function settings (p.77) • System settings (p.96) En 101 00_RX-V479_V579_om_U.book Page 102 Wednesday, March 25, 2015 9:59 AM Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely. b The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on. c The connectors of each cable are securely inserted in to jacks on each device. Power, system and remote control Problem Cause Remedy The power does not turn on. The protection circuitry has been activated three times consecutively. If the unit is in this condition, the standby indicator on the unit blinks when you try to turn on the power. As a safety precaution, capability to turn on the power is disabled. Contact your nearest Yamaha dealer or service center to request repair. The power does not turn off. The internal microcomputer has frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 15 seconds to initialize and reboot the unit. (If the problem persists, disconnect the power cable from the AC wall outlet and plug it again.) The power turns off (standby mode) immediately. The unit was turned on while a speaker cable was shorted. Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers (p.17). The sleep timer worked. Turn on the unit and start playback again. The auto-standby function kicked in because the unit was not used for the specified time. To disable the auto-standby function, set “Auto Power Standby” in the “Setup” menu to “Off” (p.89). The unit enters standby mode automatically. The unit is not reacting. The speaker impedance setting is incorrect. Set the speaker impedance to match your speakers (p.96). The protection circuitry has been activated because of a short circuit. Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers (p.17). The internal microcomputer is frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 15 seconds to initialize and reboot the unit. (If the problem persists, disconnect the power cable from the AC wall outlet and plug it again.) En 102 00_RX-V479_V579_om_U.book Page 103 Wednesday, March 25, 2015 9:59 AM Problem The unit cannot be controlled using the remote control. Cannot select the desired input source even if “INPUT” is pressed. The RED/GREEN/YELLOW/BLUE keys of the remote control do not operate. Cause Remedy The unit is out of the operating range. Use the remote control within the operating range (p.4). The batteries are weak. Replace with new batteries. The unit’s remote control sensor is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit. The remote control IDs of the unit and the remote control are not identical. Change the remote control ID of the unit or the remote control (p.97). The remote control is set to the Zone B operation mode. Set the remote control to the Zone A operation mode (p.69). The function which skips some input sources is set. Set “Input Skip” of the desired input source in the “Setup” menu to “Off” (p.90). The device which is connected to the unit via HDMI does not support the operation of the RED/GREEN/YELLOW/BLUE keys. Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE keys. The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's remote control have been changed. Set the “Remote Color Key” settings in the “Setup” menu to “Default” (p.91). En 103 00_RX-V479_V579_om_U.book Page 104 Wednesday, March 25, 2015 9:59 AM Audio Problem No sound. The volume cannot be increased. No sound is coming from a specific speaker. (RX-V579 only) No sound is coming from the surround back speaker. No sound is coming from the subwoofer. Cause Remedy Another input source is selected. Select an appropriate input source with the input selection keys. Signals that the unit cannot reproduce are being input. Some digital audio formats cannot be played back on the unit. To check the audio format of the input signal, use “Signal Info” in the “Option” menu (p.74). (RX-V579 only) Audio output to Zone A (or Zone B) is disabled. Press ZONE A (ZONE B) to enable audio output to Zone A (or Zone B). The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable. The maximum volume is set. Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.87). A device connected to the output jacks of the unit is not turned on. (This may happen due to the nature of AV receivers.) Turn on all devices connected to the output jacks of the unit. The playback source does not contain a signal for the channel. To check it, use “Signal Info” in the “Option” menu (p.74). The currently selected sound program/decoder does not use the speaker. To check it, use “Test Tone” in the “Setup” menu (p.83). Audio output of the speaker is disabled. Perform YPAO (p.28) or use “Configuration” in the “Setup” menu to change the speaker settings (p.80). The volume of the speaker is set too low. Perform YPAO (p.28) or use “Level” in the “Setup” menu to adjust the speaker volume (p.82). (RX-V579 only) Audio output to Zone A (or Zone B) is disabled. Press ZONE A (ZONE B) to enable audio output to Zone A (or Zone B). The speaker cable connecting the unit and the speaker is defective. If there is no problem with the connection, replace with another speaker cable. The speaker is malfunctioning. To check it, replace with another speaker. If the problem persists, the unit may be malfunctioning. The extended surround is disabled. Use “Extended Surround” in the “Option” menu to select a decoder to be used (p.73). “Power Amp Assign” is set to “BI-AMP” or “Zone B”. When “Power Amp Assign” in the “Setup” menu is set to “BI-AMP” or “Zone B”, you cannot use the surround back speakers. To use the surround back speakers, set “Power Amp Assign” to “Basic” (p.80). The playback source does not contain Low Frequency Effect (LFE) or low-frequency signals. To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the front channel low-frequency components from the subwoofer (p.81). Subwoofer output is disabled. Perform YPAO (p.28) or set “Subwoofer” in the “Setup” menu to “Use” (p.80). The volume of the subwoofer is too low. Adjust the volume on the subwoofer. The subwoofer has been turned off by its auto-standby function. Disable the auto-standby function of the subwoofer or adjust its sensitivity level. En 104 00_RX-V479_V579_om_U.book Page 105 Wednesday, March 25, 2015 9:59 AM Problem No sound from the playback device (connected to the unit with HDMI). No sound from the TV (when HDMI Control is used). Only the front speakers work on multichannel audio. Cause Remedy The TV does not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications. The unit is set not to output audio input through HDMI jacks from the SPEAKERS terminals. In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.84). The number of devices connected to the HDMI OUT jack exceeds the limit. Disconnect some of the HDMI devices. The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the TV audio is output from the speakers connected to the unit. A TV that does not support ARC is connected to the unit only with an HDMI cable. Use a digital optical cable to make an audio connection (p.19). (If the TV is connected to the unit with an audio cable) The TV audio input setting does not match the actual connection. Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack (p.84). (If you are trying to use ARC) ARC is disabled on the unit or TV. Set “ARC” in the “Setup” menu to “On” (p.85). Also, enable ARC on the TV. The playback device is set to output 2-channel audio (such as PCM) only. To check it, use “Signal Info” in the “Option” menu (p.74). If necessary, change the digital audio output setting on the playback device. The unit is too close to another digital or radio frequency device. Move the unit further away from the device. The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable. The volume of the unit is too high. Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to “Off” (p.89). A device connected to the unit’s output jacks is not turned on. Turn on all devices connected to the unit’s output jacks. Cause Remedy Another input source is selected on the unit. Select an appropriate input source with the input selection keys. Noise/hum is heard. The sound is distorted. Video Problem No video. No video from the playback device (connected to the unit with HDMI). Another input source is selected on the TV. Switch the TV input to display the video from the unit. The video signal output from the unit is not supported by the TV. Check the video output setting of the playback device. For information about video signals supported by the TV, refer to the instruction manuals for the TV. The cable connecting the unit and TV (or playback device) is defective. If there is no problem with the connection, replace with another cable. The input video signal (resolution) is not supported by the unit. To check the information about the current video signal (resolution), use “Signal Info” in the “Option” menu (p.74). For information about video signals supported by the unit, see “HDMI signal compatibility” (p.116). The TV does not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications. The number of devices connected to the HDMI OUT jack is over the limit. Disconnect some of the HDMI devices. En 105 00_RX-V479_V579_om_U.book Page 106 Wednesday, March 25, 2015 9:59 AM Problem Cause Remedy No image (contents required the HDCP 2.2 -compatible HDMI device) from the playback device connected to the unit with HDMI. The TV (HDMI input jack) does not support HDCP 2.2, or the playback device is connected to other than the HDMI 6 jack. (The Warning message can be displayed on the TV screen.) Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2. Use the HDMI 6 jack to connect the playback device. The TV is not connected to the unit via HDMI. You can display the menu of the unit on the TV only when they are connected with an HDMI cable. If necessary, use an HDMI cable to connect them (p.19 to 21). Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack). Cause Remedy The menu of the unit is not displayed on the TV. FM/AM radio Problem There is multi-path interference. Adjust the FM antenna height or orientation, or place it in a different location. Your area is too far from the FM station transmitter. To select monaural FM radio reception “FM Mode” in the “Option” menu to “Mono” (p.49). The noises may be caused by fluorescent lamps, motors, thermostats, or other electrical equipment. It is difficult to completely eliminate noise. It may be reduced by using an outdoor AM antenna. FM radio reception is weak or noisy. Use an outdoor FM antenna. AM radio reception is weak or noisy. Select the station manually (p.49). Your area is too far from the FM station transmitter. Radio stations cannot be selected automatically. Use an outdoor antenna. We recommend using a sensitive multi-element antenna. Adjust the AM antenna orientation. The AM radio signal is weak. Select the station manually (p.49). Use an outdoor AM antenna. AM radio stations cannot be registered as presets. Auto Preset is for registering FM radio stations only. Register AM radio stations manually (p.50). Auto Preset has been used. En 106 00_RX-V479_V579_om_U.book Page 107 Wednesday, March 25, 2015 9:59 AM USB and network Problem Cause Remedy The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format. Folders and files in the USB device cannot be viewed. The data in the USB device is protected by the encryption. Use a USB device without an encryption function. The network feature does not function. The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on your router and set “DHCP” in the “Setup” menu to “On” on the unit (p.92). If you want to configure the network parameters manually, check that you are using an IP address which is not used by other network devices in your network (p.92). The media sharing setting is not correct. Configure the sharing setting and select the unit as a device to which music contents are shared (p.62). Some security software installed on your PC is blocking the access of the unit to your PC. Check the settings of security software installed on your PC. The unit and PC are not in the same network. Check the network connections and your router settings, and then connect the unit and the PC to the same network. The MAC address filter is enabled on the unit. In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or specify the MAC address of your PC to allow it to access to the unit (p.93). The files are not supported by the unit or the media server. Use the file format supported by both the unit and the media server. For information about the file formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.62). The selected Internet radio station is currently not available. There may be a network problem at the radio station, or the service may have been stopped. Try the station later or select another station. The selected Internet radio station is currently broadcasting silence. Some Internet radio stations broadcast silence at certain of times of the day. Try the station later or select another station. Access to the network is restricted by the firewall settings of your network devices (such as the router). Check the firewall settings of your network devices. The Internet radio can be played only when it passes through the port designated by each radio station. The port number varies depending on the radio station. The MAC address filter is enabled on the unit. In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or specify the MAC address of your smartphone/tablet to allow it to access to the unit (p.93). The unit and smartphone/tablet are not in the same network. Check the network connections and your router settings, and then connect the unit and smartphone/tablet to the same network. Firmware update via the network is failed. It may not be possible depending on the condition of the network. Update the firmware via the network again or use a USB memory device (p.98). The mobile device does not recognize the unit when using AirPlay or AV CONTROLLER. The unit and the mobile device are connected to different SSID when using a multiple SSID router. Connect them to the Primary SSID (at the top of the list). The unit does not detect the USB device. The unit does not detect the PC. The files in the PC cannot be viewed or played back. The Internet radio cannot be played. The application for smartphone/tablet “AV CONTROLLER” does not detect the unit. The unit cannot connect to the Internet via a wireless router (access point). The wireless router (access point) is turned off. Turn on the wireless router. The unit and the wireless router (access point) are too far apart. Place the unit and the wireless router (access point) closer to each other. There is an obstacle between the unit and the wireless router (access point). Move the unit and the wireless router (access point) in a location where there are no obstacles between them. En 107 00_RX-V479_V579_om_U.book Page 108 Wednesday, March 25, 2015 9:59 AM Problem Cause Remedy Microwave ovens or other wireless devices in your neighborhood might disturb the wireless communication. Turn off these devices. Access to the network is restricted by the firewall settings of the wireless router (access point). Check the firewall setting of the wireless router (access point). Cause Remedy Wireless network is not found. BLUETOOTH Problem A BLUETOOTH connection cannot be established. No sound is produced, or the sound is interrupted during playback. The BLUETOOTH function of the unit is disabled. Enable the BLUETOOTH function (p.94). Another BLUETOOTH device is already connected to the unit. Terminate the current Bluetooth connection and then establish a new connection (p.53). The unit and the BLUETOOTH device are too far apart. Move the BLUETOOTH device closer to the unit. There is a device (such as microwave oven and wireless LAN) that outputs signals in the 2.4 GHz frequency band nearby. Move the unit away from those devices. The BLUETOOTH device does not support A2DP. Use a BLUETOOTH device that supports A2DP. The connection information registered on the BLUETOOTH device is not working for some reason. Delete the connection information on the BLUETOOTH device, and then establish a connection between the BLUETOOTH device and the unit again (p.53). The volume of the BLUETOOTH device is set too low. Turn up the volume of the BLUETOOTH device. The BLUETOOTH device is not set to send audio signals to the unit. Switch the audio output of the BLUETOOTH device to the unit. The BLUETOOTH connection has been terminated. Establish a Bluetooth connection between the BLUETOOTH device and the unit again (p.53). The unit and the BLUETOOTH device are too far apart. Move the BLUETOOTH device closer to the unit. There is a device (such as microwave oven and wireless LAN) that outputs signals in the 2.4 GHz frequency band nearby. Move the unit away from those devices. En 108 00_RX-V479_V579_om_U.book Page 109 Wednesday, March 25, 2015 9:59 AM Error indications on the front display Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.62). Access error The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The unit cannot access the iPod. Turn off the iPod and turn it on again. The connected iPod is not supported by the unit. Use an iPod supported by the unit (p.54). Make sure your router and modem are turned on. There is a problem with the signal path from the network to the unit. Check the connection between the unit and your router (or hub) (p.25). Check SP Wires The speaker cables short circuit. Twist the bare wires of the cables firmly and connect to the unit and speakers properly. Internal Error An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center. No content There are no playable files in the selected folder. Select a folder that contains files supported by the unit. The unit cannot detect the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. No device The unit cannot detect the iPod. Turn off the iPod and then turn it on again. The network cable is not connected. Connect the network cable properly. Not connected The wireless router (access point) is not found. Make sure the wireless router (access point) is turned on. Please wait The unit is preparing for connecting to the network. Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn it on again. RemID Mismatch The remote control IDs of the unit and the remote control are not identical. Change the remote control ID of the unit or the remote control (p.97). The unit cannot play back the songs stored on the iPod for some reason. Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be defective. The unit cannot play back the songs stored on the PC for some reason. Check if the format of files you are trying to play is supported by the unit. For information about the formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.62). If the unit supports the file format, but still cannot play back any files, the network may be overloaded with heavy traffic. Unable to play USB Overloaded An overcurrent is flowing through the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. Version error Firmware update is failed. Update the firmware again. En 109 00_RX-V479_V579_om_U.book Page 110 Wednesday, March 25, 2015 9:59 AM Glossary Audio information DTS Express DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray Disc). ■ Audio decoding format DTS-HD High Resolution Audio Dolby Digital DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports 7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on BD (Blu-ray Disc). Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD disc. Dolby Digital EX DTS-HD Master Audio Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound. DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray Disc). Dolby Digital Plus Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems that support Dolby Digital. This technology is used for audio on BD (Blu-ray Disc). DTS Neo: 6 DTS Neo: 6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music mode” for music sources and “Cinema mode” for movie sources. This technology provides discrete full-bandwidth matrix channels of surround sound. Dolby Pro Logic II Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes available: “Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources. DSD (Direct Stream Digital) Dolby Pro Logic IIx Dolby Pro Logic IIx enables 7-channel playback from 2-channel or multichannel sources. There are three modes available: “Music mode” for music sources, “Movie mode” for movie sources and “Game mode” for game sources (for 2-channel sources only). DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224 MHz. The highest frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology offers better audio quality than that used for CDs. Dolby TrueHD FLAC Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray Disc). FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio formats in compression rate but provides higher audio quality. MP3 One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing data quantity by about 1/10 maintaining a certain level of audio quality. DTS 96/24 DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit audio. This format remains fully compatible with the existing multichannel audio systems that support DTS Digital Surround. This technology is used for music DVDs, etc. MPEG-4 AAC An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming services on Internet because it allows a high compression rate of data while maintaining better audio quality than MP3. DTS Digital Surround DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. PCM (Pulse Code Modulation) DTS-ES PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This technology is the basis of all other audio format. This technology is used as a lossless audio format called Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray Disc). DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a surround back sound is recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a discrete surround back channel is recorded. En 110 00_RX-V479_V579_om_U.book Page 111 Wednesday, March 25, 2015 9:59 AM HDMI and video information Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. • Sampling frequency Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate. When the sampling frequency is higher, the range of frequencies that can be played back are wider. • Quantization bit The number of quantization bits indicate the degree of accuracy when converting the sound level into a numeric value. When the number of quantized bits is higher, the expression of the sound level is more accurate. Component video signal With the component video signal system, the video signal is separated into the Y signal for luminance and the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. Composite video signal With the composite video signal system, color, brightness, and synchronization data signals are combined and transmitted with a single cable. WAV Deep Color Windows standard audio file format, which defines the method of recording the digital data obtained by converting audio signals. By default, the PCM method (no compression) is used, but you can also use other compression methods. Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate on-screen color banding for smooth tonal transitions and subtle gradations between colors. WMA (Windows Media Audio) One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing data quantity by about 1/20 maintaining a certain level of audio quality. HDMI HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video signal transmission. This interface transmits both digital audio and digital video signals using a single cable without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a secure audio/video interface. For further information on HDMI, visit the HDMI website at “http://www.hdmi.org/”. ■ Others Bi-amplification connection (Bi-amp) A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a consequence, the tweeter and woofer provide clear audio signal without the interference. x.v.Color “x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid, natural images. LFE (Low Frequency Effects) 0.1 channel This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio effects. This channel is labeled 0.1 because it is limited to only low frequency audio. Network information Lip sync Video output sometimes lags behind audio output due to the complexity of signal processing caused by an increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag between audio and video output. SSID SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point. Wi-Fi Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or connect to the Internet wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the complexity of making connections with LAN cables by using wireless connection. Only products that complete Wi-Fi Alliance interoperability tests can carry the “Wi-Fi Certified” trademark. WPS WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy establishment of a wireless home network. En 111 00_RX-V479_V579_om_U.book Page 112 Wednesday, March 25, 2015 9:59 AM Yamaha technologies Supported devices and file formats CINEMA DSP (Digital Sound Field Processor) ■ Supported devices Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP, Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own home. ❑ BLUETOOTH devices • BLUETOOTH devices that support A2DP can be used. • Yamaha does not assure the connections of all BLUETOOTH devices. CINEMA DSP 3D The actually measured sound field data contain the information of the height of the sound images. CINEMA DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the accurate and intensive 3D sound fields in a listening room. ❑ USB devices Compressed Music Enhancer • This unit supports USB mass storage class devices (e.g., flash memories or portable audio players) using FAT16 or FAT32 format. The Compressed Music Enhancer feature compensates for missing harmonics in compression music formats (such as MP3). As a result, this technology provides improved performance for the overall sound system. • Do not connect devices other than USB mass storage class devices (such as USB chargers or USB hubs), PCs, card readers, an external HDD, etc. SILENT CINEMA • USB devices with encryption cannot be used. Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound program, so that accurate representations of all the sound programs can be enjoyed on headphones. • Some features may not be compatible, depending on the model or manufacturer of the USB storage device. Virtual CINEMA DSP ❑ iPod Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with front left and right speakers. Even if the surround speakers are not connected, the unit creates the realistic sound field in a listening room. Made for. iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPhone 3G Virtual Presence Speaker (VPS) Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without front presence speakers. Even if the front presence speakers are not connected, the unit creates the 3D sound field in your room. iPod touch (2nd, 3rd, 4th and 5th generation) iPod nano (2nd, 3rd, 4th, 5th, 6th and 7th generation) YPAO (Yamaha Parametric room Acoustic Optimizer) (as of April 2015) The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. • An iPod may not be detected by the unit or some features may not be compatible, depending on the model or software version of the iPod. Virtual Surround Back Speaker (VSBS) Virtual Surround Back Speaker allows the system to virtually reproduce the sound field of the surround back speakers with surround speaker. Even if the surround back speakers are not connected, the unit adds a sense of depth to the rear sound filed of CINEMA DSP. ❑ AirPlay AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later and Mac and PC with iTunes 10.2.2 or later. (as of April 2015) En 112 00_RX-V479_V579_om_U.book Page 113 Wednesday, March 25, 2015 9:59 AM ■ File formats Video signal flow ❑ USB, PC/NAS File WAV * MP3 WMA MPEG-4 AAC FLAC ALAC AIFF DSD Sampling frequency (kHz) 32/44.1/48/ 88.2/96/ 176.4/192 32/44.1/48 32/44.1/48 32/44.1/48 32/44.1/48/ 88.2/96/ 176.4/192 32/44.1/48/ 88.2/96 32/44.1/48/ 88.2/96/ 176.4/192 2.8 MHz/ 5.6 MHz Video signals input from a video device to the unit are output to a TV as shown below. quantization bit (bit) Number of Bitrate (kbps) channels Support for gapless playback 16/24 - 2 ✔ - 8 to 320 8 to 320 8 to 320 2 2 2 - 16/24 - 2 ✔ 16/24 - 2 ✔ 16/24 - 2 ✔ 1 - 2 - Video device The unit TV HDMI connection HDMI in HDMI HDMI out HDMI HDMI HDMI * Linear PCM format only • To play back FLAC files stored on your PC/NAS, you need to install server software that supports sharing of FLAC files via DLNA on your PC or use a NAS that supports FLAC files. Component video connection (RX-V579 only) COMPONENT VIDEO in • Digital Rights Management (DRM) contents cannot be played back. COMPONENT VIDEO COMPONENT VIDEO out COMPONENT VIDEO COMPONENT VIDEO COMPONENT VIDEO PR PR PR PR PB PB PB PB Y Y Y Y Composite video connection VIDEO En 113 VIDEO in VIDEO out VIDEO VIDEO VIDEO 00_RX-V479_V579_om_U.book Page 114 Wednesday, March 25, 2015 9:59 AM To use HDMI Control, you need to perform the following HDMI Control link setup after connecting the TV and playback devices. Information on HDMI For details on settings and operating your TV, refer to the instruction manual for the TV. HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. You can also control playback devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable. • This setup is required every time you add a new HDMI Control-compatible device to your system. 1 2 Turn on the unit, TV, and playback devices. Configure the settings of the unit. Operations available from the TV’s remote control a Switch the TV input to display video from the unit. • Standby synchronization b Press SETUP. BLUETOOTH • Volume control including mute MUTE • Switching to input audio from the TV when the TV input is switched to its built-in tuner SETUP • Switching to input video/audio from the selected playback device SETUP • Switching between audio output devices (the unit or TV speaker) OOPTION PTION Cursor Cursor keys keys ENTER ENTER (Example) HDMI Control HDMI Control RETURN DISPLAY A c Use the cursor keys to select “HDMI” and press ENTER. The unit turns off (standby) Playback device also turns off Setup Turn off the TV Speaker HDMI Operations available from the unit’s remote control Sound • Starting playback on the playback device and turning on the TV with a scene selection (p.43) Function ECO Network Bluetooth Language • Switching the TV input to display the “Setup” menu (when SETUP is pressed) • Controlling the playback device (playback and menu operations) d Press ENTER again. (Example) HDMI Control HDMI Control Playback starts Press SCENE (BD/DVD) Turns on and displays video from the playback device En 114 Configuration 08_appendix.fm Page 115 Wednesday, March 25, 2015 8:00 PM e Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to select “On” as shown below. Audio Return Channel (ARC) ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal to the TV. Configuration HDMI Control Auto Standby Through Auto TV Audio Input Standby Sync Check the following after the HDMI Control settings. On Audio Output 1 2 AV4 Auto ARC On SCENE Back: RETURN f If you made a digital optical cable connection between the TV and the unit, use the cursor keys (q/w) to select “TV Audio Input” and the cursor keys (e/r) to select “AV 1” (“AUDIO 1” on RX-V479). 3 4 Turn off the main power of the TV and then turn off the unit and playback devices. 5 6 7 – “ARC” (p.85) in the “Setup” menu is set to “On”. – The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked “ARC”) on the TV. Some HDMI jack on the TV is not compatible with ARC. For details, refer to the instruction manual for the TV. • If the audio is interrupted while using ARC, set “ARC” (p.85) in the “Setup” menu to “Off” and use a digital optical cable to input TV audio to the unit (p.19). Turn on the unit and playback devices and then turn on the TV. • When using ARC, connect a TV with an HDMI cable that supports ARC. Switch the TV input to display the video from the unit. • “AV 4” (“AV 2” on RX-V479) is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks, use “TV Audio Input” (p.84) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.43), you also need to change the input assignment for SCENE (TV). Check the followings. On the unit: The input to which the playback device is connected is selected. If not, select the input source manually. On the TV: The video from the playback device is displayed. 8 Check that the input source of the unit will be automatically switched to “AV 4” (“AV 2” on RX-V479) and the TV audio will be played back on the unit. If you cannot hear the TV audio, check the following: g Press SETUP. Enable HDMI Control on the TV and playback devices (such as HDMI Control-compatible BD/DVD players). Select a TV program with the TV remote control. Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. • If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices exceeds the limit. In this case, disable HDMI Control on the devices not in use. • If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on the TV. • If you reconnect the HDMI cable, perform the procedure 5-8 again. • We recommend using TV and playback devices from the same manufacturer so that HDMI Control works more effectively. En 115 00_RX-V479_V579_om_U.book Page 116 Wednesday, March 25, 2015 9:59 AM HDMI signal compatibility Audio signals Audio signal type Audio signal format Compatible media (example) 2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio Multichannel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit DVD-Audio, BD (Blu-ray disc), HD DVD DSD 2 to 5.1ch, 2.8224 MHz, 1 bit SACD Bitstream Dolby Digital, DTS DVD-Video Bitstream (High definition audio) Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express BD (Blu-ray disc), HD DVD Video signals The unit is compatible with the video signals of the following resolutions: • VGA • 720p/60 Hz, 50 Hz • 480i/60 Hz • 1080i/60 Hz, 50 Hz • 576i/50 Hz • 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz • 480p/60 Hz • 4K/30 Hz, 25 Hz, 24 Hz • 576p/50 Hz • 4K/60Hz (YCbCr4:2:0), 50Hz (YCbCr4:2:0) • When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending on the type of the DVD player. • The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction manual for each device. • To decode audio bitstream signals on the unit, set the input source device appropriately so that the device outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device). For details, refer to the instruction manual for the playback device. En 116 08_appendix.fm Page 117 Wednesday, March 25, 2015 7:02 PM Trademarks Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX, and the double-D symbol are trademarks of Dolby Laboratories. This receiver supports network connections. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Bluetooth protocol stack (Blue SDK) (For RX-V479) For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Copyright 1999-2014 OpenSynergy GmbH All rights reserved. All unpublished rights reserved. x.v.Color™ “x.v.Color” is a trademark of Sony Corporation. “SILENT CINEMA” is a trademark of Yamaha Corporation. Explanations regarding GPL (For RX-V579) For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS-HD Master Audio is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. DLNA™ and DLNA CERTIFIED™ are trademarks or registered trademarks of Digital Living Network Alliance. All rights reserved. Unauthorized use is strictly prohibited. Windows™ Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Internet Explorer, Windows Media Audio and Windows Media Player are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iTunes, AirPlay,iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android™ Google Play™ Android and Google Play are trademarks of Google Inc. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi Alliance. En 117 This product utilizes GPL/LGPL open-source software in some sections. You have the right to obtain, duplicate, modify, and redistribute this open-source code only. For information on GPL/LGPL open source software, how to obtain it, and the GPL/LGPL license, refer to the Yamaha Corporation website (http://download.yamaha.com/sourcecodes/musiccast/). 00_RX-V479_V579_om_U.book Page 118 Wednesday, March 25, 2015 9:59 AM Specifications Input jacks HDMI • Analog Audio • HDMI Features: Deep Color, “x.v.Color,” Auto Lip Sync, ARC Audio x 4 • Digital Audio (Supported frequencies: 32 kHz to 96 kHz) (Audio Return Channel), 3D, 4K Ultra HD • Video Format (Repeater Mode) Optical x 1 - VGA Coaxial x 2 - 480i/60 Hz • Video BLUETOOTH BLUETOOTH version ...........................................Ver. 2.1+EDR Supported profile ............................................................ A2DP Supported codec ..................................................... SBC, AAC Wireless output ...................................... BLUETOOTH Class 2 Maximum communication distance ............................................... 10 m (33 ft) without interference - 576i/50 Hz Composite x 4 - 480p/60 Hz Network Component x 2 [RX-V579] - 576p/50 Hz • PC Client Function • HDMI Input HDMI x 6 • Other jacks - USB x 1 (USB2.0) - NETWORK (Wired) x 1 (100Base-TX/10Base-T) - NETWORK (Wireless) x 1 (IEEE802.11b/g/n) Output jacks • Analog Audio [RX-V579] - Speaker Out x 7 (FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R*) * Note: assignment is possible. [SURROUND BACK, BI-AMP (FRONT L/R), ZONE B] - Subwoofer Out x 2 (mono x 2) - Headphone x 1 [RX-V479] - Speaker Out x 5 (FRONT L/R, CENTER, SURROUND L/R) - Subwoofer Out x 1 - Headphone x 1 • Video - 720p/60 Hz, 50 Hz • Compatible with DLNA ver. 1.5 - 1080i/60 Hz, 50 Hz - 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz • AirPlay supported - 4K/30 Hz, 25 Hz, 24 Hz • Internet Radio - 4K/60Hz (YCbCr4:2:0), 50Hz (YCbCr4:2:0) • Audio Format - Capable of WPS by PIN Method and Push-Button-Method - Dolby TrueHD - Capable of sharing with iOS devices by wireless connection - Dolby Digital Plus and USB connection - Dolby Digital - Capable of Direct Connection with Mobile Device - DTS-HD Master Audio - Available Security Method: WEP, WPA2-PSK (AES), Mixed - DTS-HD High Resolution Audio - DTS Express - DTS - Wireless Network Standard: IEEE 802.11 b/g/n - DSD 2-ch to 6-ch - PCM 2-ch to 8-ch (Max. 192 kHz/24-bit) • Content Protection: HDCP compatible (HDMI 6 jack: HDCP 2.2 compatible) • Link Function: CEC supported TUNER • Analog Tuner [U.K. and Europe models] Component x 1 [RX-V579] FM/AM with Radio Data System x 1 (TUNER) HDMI OUT x 1 Other jacks • YPAO MIC x 1 Mode - Radio Frequency Band: 2.4GHz Composite x 1 • HDMI Output • Wi-Fi function [Other models] FM/AM x 1 (TUNER) USB • Capable of iPod, Mass Storage Class USB Memory • Current Supply Capacity: 1.0 A En 118 00_RX-V479_V579_om_U.book Page 119 Wednesday, March 25, 2015 9:59 AM Compatible Decoding Formats • Decoding Format - Dolby TrueHD, Dolby Digital Plus - Dolby Digital EX [RX-V579] - Dolby Digital - DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express - DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 • Maximum Effective Output Power (1-channel driven) [U.S.A. and Canada models] (1 kHz, 10% THD, 8 Ω) Front L/R.....................................................................140 W/ch Center.........................................................................140 W/ch Surround L/R ..............................................................140 W/ch Surround Back L/R [RX-V579]....................................140 W/ch [Other models] (1 kHz, 10% THD, 6 Ω) Front L/R.....................................................................135 W/ch Center.........................................................................135 W/ch • Post Decoding Format [RX-V579] Surround L/R ..............................................................135 W/ch Surround Back L/R [RX-V579]....................................135 W/ch - Dolby Pro Logic - Dolby Pro Logic II Music, Dolby Pro Logic II Movie, Dolby Pro Logic II Game - Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie, Dolby Pro Logic IIx Game - DTS Neo: 6 Music, DTS Neo: 6 Cinema [RX-V479] - Dolby Pro Logic - Dolby Pro Logic II Music, Dolby Pro Logic II Movie, Dolby Pro Logic II Game - DTS Neo: 6 Music, DTS Neo: 6 Cinema Audio Section • Rated Output Power (2-channel driven) [U.S.A. and Canada models] (20 Hz to 20 kHz, 0.09% THD, 8 Ω) [Other models] (20 Hz to 20 kHz, 0.09% THD, 6 Ω) Front L/R .................................................................80 W+80 W [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω) Front L/R .................................................................95 W+95 W Center ............................................................................... 95 W Surround L/R...........................................................95 W+95 W Surround Back L/R [RX-V579] ............................... 95 W+95 W • Rated Output Power (1-channel driven) [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω) [Other models] (1 kHz, 0.9% THD, 6 Ω) Front L/R .................................................................... 115 W/ch Center ....................................................................... 115 W/ch Surround L/R.............................................................. 115 W/ch Surround Back L/R [RX-V579] ................................... 115 W/ch • Residual Noise (IHF-A Network) Front L/R (Speaker Out) ..................................... 150 µV or less • Channel Separation AV 4 etc. (Input 1 kΩ Shorted, 1 kHz/10 kHz) .................................................................70 dB/50 dB or more • Volume Control Range..............................................MUTE, -80 dB to +16.5 dB Step.................................................................................0.5 dB • Tone Control Characteristics Bass Boost/Cut .............................±6 dB/0.5 dB Step at 50 Hz Bass Turnover ................................................................350 Hz • Dynamic Power (IHF) [U.S.A. and Canada models] RX-V479: Front L/R (8/6/4/2 Ω)................................110/130/160/180 W Treble Boost/Cut.......................... ±6 dB/0.5 dB Step at 20 kHz Treble Turnover ............................................................. 3.5 kHz • Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) RX-V579: Front L/R (8/6/4/2 Ω)................................120/140/170/190 W H.P.F. (Front, Center, Surround).................................12 dB/oct. [Other models] H.P.F. (Surround Back [RX-V579]).............................12 dB/oct. RX-V479: L.P.F. (Subwoofer) .....................................................24 dB/oct. Front L/R (6/4/2 Ω)..........................................110/130/160 W RX-V579: Front L/R (6/4/2 Ω)..........................................120/140/170 W • Damping Factor Front L/R, 20 Hz to 20 kHz, 8 Ω............................. 100 or more • Input Sensitivity / Input Impedance AV 4 etc. (1 kHz, 100 W/6 Ω).............................. 200 mV/47 kΩ • Maximum Input Signal AV 4 etc. (1 kHz, 0.5% THD, Effect On) ............................2.3 V • Output Level / Output Impedance SUBWOOFER........................................................... 1 V/1.2 kΩ • Headphone Jack Rated Output / Impedance AV 4 etc. (1 kHz, 50 mV, 8 Ω) ............................. 100 mV/470 Ω • Frequency Response AV 4 etc. to Front (10 Hz to 100 kHz) ..........................+0/-3 dB • Signal to Noise Ratio (IHF-A Network) AV 4 etc. (DIRECT) (Input 1 kΩ Shorted, Speaker Out) ......................................................................... 110 dB or more En 119 00_RX-V479_V579_om_U.book Page 120 Wednesday, March 25, 2015 9:59 AM Video Section General • Video Signal Type • Power Supply [U.S.A., Canada, Korea, Taiwan and General models] .. NTSC [U.S.A. and Canada models] ..........................AC 120 V, 60 Hz [Other models]................................................................... PAL [Taiwan and General model] • Video Signal Level .......................................AC110 to 120/220 to 240 V, 50/60 Hz Composite ............................................................. 1 Vp-p/75 Ω [China model]..................................................AC 220 V, 50 Hz Component [Korea model] .................................................AC 220 V, 60 Hz Y.......................................................................... 1 Vp-p/75 Ω [Australia model] .............................................AC 240 V, 50 Hz Pb/Pr ................................................................ 0.7 Vp-p/75 Ω [U.K. and Europe models] ..............................AC 230 V, 50 Hz • Video Maximum Input Level .......................... 1.5 Vp-p or more • Video Signal to Noise Ratio ................................50 dB or more • Monitor Out Frequency Response Component ............................................ 5 Hz to 60 MHz, -3 dB [Asia model] ....................................AC 220 to 240 V, 50/60 Hz • Power Consumption ........................................................260 W • Standby Power Consumption HDMI Control Off, Standby Through Off, Network Standby Off .........................................................................................0.1 W FM Section HDMI Control On, Standby Through On (No Signals), • Tuning Range Network Standby Off ........................................................1.6 W [U.S.A. and Canada models] ..............87.5 MHz to 107.9 MHz HDMI Control Off, Standby Through Off, Network Standby On, [Asia, Taiwan and General models] Bluetooth Standby Off .......................................87.5/87.50 MHz to 108.0/108.00 MHz Wired ................................................................................1.9 W [Other models].................................87.50 MHz to 108.00 MHz Wireless (Wi-Fi) ................................................................1.9 W • 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) Mono................................................................. 3 µV (20.8 dBf) • Signal to Noise Ratio (IHF) Wireless Direct .................................................................2.0 W HDMI Control Off, Standby Through Off, Network Standby On (Wired), Bluetooth Standby On ........................................2.0 W HDMI Control On, Standby Through On (No Signals), Mono................................................................................ 65 dB Network Standby On (Wireless Direct), Bluetooth Standby On Stereo .............................................................................. 64 dB .........................................................................................3.1 W • Harmonic Distortion (IHF, 1 kHz) Mono................................................................................. 0.5% Stereo ............................................................................... 0.6% • Antenna Input ................................................75 Ω unbalanced AM section • Tuning Range [U.S.A. and Canada models] .................. 530 kHz to 1710 kHz [Asia, Taiwan and General models] ................................................. 530/531 kHz to 1710/1611 kHz • Maximum Power Consumption [Asia, Taiwan and General models] ................................600 W • Dimensions (W x H x D) ..................... 435 x 161 x 327 mm (17-1/8” x 6-3/8” x 12-7/8”) • Reference Dimensions (with wireless antenna upright) ..................... 435 x 221 x 327 mm (17-1/8” x 8-3/4” x 12-7/8”) * Including legs and protrusions • Weight 8.1 kg (17.9 lbs) [Other models]......................................... 531 kHz to 1611 kHz * Specifications are subject to change without notice. En 120 00_RX-V479_V579_om_U.book Page 121 Wednesday, March 25, 2015 9:59 AM Index Symbols DMC (Digital Media Controller) 93 DSP Program (front display information) Envelope icon (p) 76 Lock icon (o) 90 E Numerics 2.1-channel system 2ch Stereo 46 4K Ultra HD 18 5.1-channel system 7.1-channel system 7ch Stereo 46 ECO 89 Equalizer 82 Error indication (front display) Extended Surround 73 Extra Bass 48, 81 14 13, 16 13, 16 Adaptive DRC 73 ADVANCED SETUP 96 AirPlay 57 AM radio 49 ARC (Audio Return Channel) 85, 115 Audio Decoder (front display information) Auto Power Standby 89 Auto Preset (FM radio) 50 Option menu B Banana plug 17 Bi-amp 17, 80 BLUETOOTH 53 Bookmark 67 I Initial Volume 87 Input (front display information) Input Trim 74 Internet radio 65 iPod content playback 54 iPod content playback (AirPlay) Language 95 Lipsync 74, 87 48 M D Decoder Off (front display information) Dimmer (Front Display) 90 DIRECT 48 DLNA 64 71 MAC Address 92, 93 Max Volume 87 Memory Guard 90 Menu language selection 27 Multiple room playback 68 Muting 42 En 121 51 R 116 L C PEQ 82 Power Amp Assign 80 Preset station selection (FM/AM radio) H 71 72 P Firmware update 98, 99 FM radio 49 Frequency step setting 49, 97 Front display information 71 HDCP 21, 106 HDMI signal compatibility NAS content playback 62 Network Connection 92 Network information 92 Network Name 93 Network Standby 93 O F A CINEMA DSP 45 Compressed Music Enhancer Crossover 28, 81 109 N 71 71 Radio Data System tuning 52 Registering favorite items (shortcut) Remote control 10 Remote ID 97 Rename 93 Repeat 56, 61, 64 S 57 SCENE 43, 85 Setup menu 76 Shortcut 70 Shuffle 56, 61, 64 Signal information 74 Sleep timer 10 Sound program 45 Speaker impedance 12, 15, 96 Standby Through 84 Straight decode 47 Subwoofer Trim 74 Surround decoder 47 70 00_RX-V479_V579_om_U.book Page 122 Wednesday, March 25, 2015 9:59 AM T Test Tone 83 Tone Control 73 U USB storage device content playback 59 V Video/audio input jack combination 22 Virtual CINEMA FRONT 13, 46, 82 Virtual Surround Back Speaker (VSBS) 73 Volume scale 87 W Wireless (Wi-Fi) Wireless Direct WPS 33, 35 33, 92 40, 92 Y YPAO (Yamaha Parametric room Acoustic Optimizer) 28 Z Zone B 68, 80 En 122 00_RX-V479_V579_om_U.book Page 123 Wednesday, March 25, 2015 9:59 AM © 2015 Yamaha Corporation YG906B0/EN1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123

Yamaha RX-V479 El manual del propietario

Categoría
Receptores AV
Tipo
El manual del propietario
Este manual también es adecuado para