Realme RMX3630 10 Smartphone Guía del usuario

Realme
Marca
Realme
Modelo
RMX3630 10 Smartphone
Tipo
Guía del usuario
How to Transfer Old Mobile Content to a New Mobile
You can use realme Clone Phone to easily transfer photos, videos, music,
contacts, messages, apps, etc from your old phone to the new one.
1. If you have an old Android phone, rst scan the QR code below, then
download and install Clone Phone, next open Clone Phone on both the new
and old phones, and follow the on-screen instructions to complete the
operation.
2. If you have an old iPhone, open Clone Phone on the new phone directly, and
follow on-screen instructions to sign in to iCloud account and sync the les.
https://i.clonephone.coloros.com/download
realme
realme
RMX3630
This mobile phone complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiated radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Regulations:
Caution: Changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate the equipment.
FCC Note:
RF Exposure Information (SAR)
This phone is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications Commission of
the United States.
During SAR testing, this device was set to transmit at its highest certified power level
in all tested frequency bands, and placed in positions that simulate RF exposure in
usage against the head with no separation, and near the body with the separation
of 1.5 mm. Although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
The exposure standard for wireless devices employing a unit of measurement is known
as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.
This device is complied with SAR for general population /uncontrolled exposure limits in
ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods
and procedures specified in IEEE1528.
The FCC has granted an Equipment Authorization for this model phone with all reported
SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information
on this model phone is on file with the FCC and can be found under the Display Grant
section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AUYFRMX3630
For this device, the highest reported SAR value for usage against the head is 1.00 W/kg, for
usage near the body is 0.83W/kg.
While there may be dierences between the SAR levels of various phones and at various
positions, they all meet the government requirements.
SAR compliance for body-worn operation is based on a separation distance of XX mm
between the unit and the human body. Carry this device at least XX mm away from your
body to ensure RF exposure level compliant or lower to the reported level. To support
body-worn operation, choose the belt clips or holsters, which do not contain metallic
components, to maintain a separation of XX mm between this device and your body.
RF exposure compliance with any body-worn accessory, which contains metal, was not
tested and certified, and use such body-worn accessory should be avoided.
Regulatory
Steps to search E-label : Go to Settings -About Phone - Certicate Information.
Accesorios incluidos
1 Teléfono, 1 Cargador, 1 Cable USB, 1 Guía de seguridad, 1 Guía rápida,
1 Herramienta de extracción Receptor de tarjeta SIM, 1 Funda protectora.
Cómo forzar el reinicio del teléfono
Mantenga presionados los botones de Encendido y Vol (+) hasta que aparezca
la animación de inicio de realme para forzar el renicio del teléfono.
Cómo transferir contenido antiguo a su nuevo teléfono
Puede utilizar la función de realme "Clonar Teléfono" para transferir rápidamente
sus fotos, vídeos, música, contactos y aplicaciones a su nuevo teléfono desde el
antiguo. Para ello, siga estos pasos:
1. Si tiene un teléfono Android, primero escanee el código QR que aparece a
continuación, seguidamente descargue e instale “Clonar Teléfono”, abra la
aplicación en ambos teléfonos y siga las instrucciones que aparecen en
pantalla para completar la operación.
2. Si tiene un iPhone antiguo, abra “Clonar Teléfono” directamente en el nuevo
teléfono y siga las instrucciones que aparecen en pantalla para iniciar sesión
en la cuenta de iCloud y sincronizar los archivos.
https://i.clonephone.coloros.com/download
Advertencia
No coloque el teléfono o la batería cerca o dentro de equipos de calefacción,
electrodomésticos (microondas, cocinas de cualquier tipo, hornos de cualquier
tipo o calefactores etc.), menaje de cocina (ollas a presión etc.), para evitar que
la batería se sobrecaliente y/o provoque daños en su dispositivo.
Debe utilizar el cargador, cable y batería originales. Los cargadores, cables o
baterías que no cuenten con la autorización y la certicación del fabricante
pueden derivar en diversos problemas como; descargas elétricas, incendios,
explosiones, daños en la batería u otros peligros.
Al cargar el dispositivo, colóquelo en un entorno que tenga una temperatura
ambiente y ventilación normales. Es recomendable que el dispositivo sea
cargado en un entorno con una temperatura que oscile entre 5 °C y 35 °C.
La carcasa trasera no es extraible.
Bienvenido a realme mobile
Esta guía le mostrará el uso del teléfono además de sus funciones más
importantes. También, puede visitar nuestra página web ocial de realme
donde obtendrá mayor información sobre el mismo.
Especificaciones técnicas
Cuádruple cámara trasera de 50 Mpx
+ 2 Mpx
Cámara delantera de 16 Mpx
4880mAh/18.88Wh(Min)
5000mAh/19.35Wh(Typ)
1.00W/kg(Cabeza)
0.83W/kg(Cuerpo)
FCC SAR
0°C-35°C
RMX3630 (realme xx)
159.9x73.3x7.95
(mm)
Batería
Cámara
Modelo
Dimensiones
Valores SAR
Temperatura para el
correcto funcionamiento
Tamaño de la pantalla 6.4pulgadas(16.3cm)
Especicación Eléctrica del terminal móvil 3.87 Vcc
Producto Teléfono Celular
Características
Eléctricas
Entrada 100- 240Vca 50/60Hz 1.2A
5Vcc 2A/5-11Vcc 3A
Salida
Receptor
Cámara frontal
Botón de encendido
Botones de volumen
Radio Frequency Max. Output Power
Bands 1/3/66
Bands 2/4
Band 7
LTE TDD
Bluetooth
2.4G Wi-Fi
WCDMA
LTE FDD
2.4-2.4835GHz
2.4-2.4835GHz
Radio Waves Specications
GSM 850MHz/900MHz
1800MHz/1900MHz
5.15-5.35GHz; 5.47-5.725GHz
5.725-5.85GHz
5G Wi-Fi
30.5dBm
33.5dBm
24.5dBm
24dBm
23.5dBm
24dBm
14dBm(EIRP)
21dBm(EIRP)
19.5dBm(EIRP)
20.5dBm(EIRP)
23.5dBm
Bands 1/5/8
Bands 38/40/41
NFC 42dBuA/m @10m13.56MHz
Bands 5/8/12/13/17/20/28
24.5dBm
Volume Key
Receiver
Power Key
Front Camera
You are provided with the following standard accessories:
1 Phone, 1 Charger, 1 USB data cable, 1 Safety Guide, 1 Quick Guide,
1 SIM Ejector Tool, 1Protective Case.
4880mAh/18.88Wh(Min)
5000mAh/19.35Wh(Typ)
16.3cm(6.4'')
159.9x73.3x7.95(mm)
RMX3630
16Megapixels Front
50Megapixels+2Megapixels Rear
FCC SAR
1.00W/kg(Head)
0.83W/kg(Body)
Bands 2/4
24dBm
Radio
Bands 1/3/66
Bands 2/4
Band 7
LTE TDD
Bluetooth
2.4G Wi-Fi
WCDMA
LTE FDD
2.4-2.4835GHz
2.4-2.4835GHz
GSM 850MHz/900MHz
1800MHz/1900MHz
5.15-5.35GHz; 5.47-5.725GHz
5.725-5.85GHz
5G Wi-Fi
30.5dBm
33.5dBm
24.5dBm
24dBm
23.5dBm
24dBm
14dBm(EIRP)
21dBm(EIRP)
19.5dBm(EIRP)
20.5dBm(EIRP)
23.5dBm
Bands 1/5/8
Bands 38/40/41
NFC 42dBuA/m @10m13.56MHz
Bands 5/8/12/13/17/20/28
24.5dBm
Bands 2/4
24dBm
Especicaciones de ondas de radio
Frecuencia
Potencia máx. de salida
  • Page 1 1

Realme RMX3630 10 Smartphone Guía del usuario

Realme
Marca
Realme
Modelo
RMX3630 10 Smartphone
Tipo
Guía del usuario
Descargar PDF
informe

En otros idiomas

Documentos relacionados

Otros documentos