Panasonic TC20LA2D - 20" LCD TV Instrucciones de operación
- Categoría
- Equipo de música suplementario
- Tipo
- Instrucciones de operación
LCD TV
Operating Instructions
TQBC0758
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
Model No.
TC-20LA2
TC-20LA2D
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
LCD TV shown above is model TC-20LA2.
Espan˜ol
[Resumen]
2
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.
■ Note to CATV System Installer: This reminder is provided to direct the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of
cable entry as practical.
■ Important Safety Instructions for LCD TV
1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water. For example: Avoid placing it near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
6) Clean only with dry cloth. Unplug this LCD TV from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure
reliable operation of the LCD TV and to protect it from overheating. These openings must not be blocked
or covered. There should be at least 10 cm of space from these openings. The openings should never
be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. This LCD TV should not
be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11)
Only use attachments/accessories specified by the manufacturer. Otherwise it may cause hazards.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time. This will prevent
damage to the receiver due to lightning and power-line surges.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Upon completion of any service or repairs to this LCD TV, ask the service technician to perform routine
safety checks to determine that the television is in safe operating condition.
15) Operate only from the type of power source indicated on the marking label. If you are not sure of the
type of power supplied to your home consult your television dealer or local power company.
16) Follow all warnings and instructions marked on the LCD TV.
17) Never push objects of any kind into this LCD TV through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the LCD TV.
The lightning flash with arrow
head within a triangle is intended
to tell the user that parts inside
the product are a risk of electric
shock to persons.
3
18) If an outside antenna is connected to the
television
equipment, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built up static
charges. In the U.S. Selection 810-21 of the
National Electrical Code provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
19) An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing
an outside antenna system extreme care should
be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
20) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the
following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD TV.
c. If the LCD TV has been exposed to rain or water.
d. If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore
the LCD TV to normal operation.
e. If the LCD TV has been dropped or the cabinet has been damaged.
f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
21) When replacement parts are required, be sure the service technician to use replacement parts specified by
the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
22) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE
SET. (INCLUDING ON SHELVES ABOVE, ETC.)
23) CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
24) CAUTION: USE WITH OTHER STAND MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.
25) CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
Important Safety Instructions
EXAMPLE OF ANTENNA
GROUNDING AS PER (NEC)
NATIONAL ELECTRICAL
CODE
GROUND
CLAMP
ANTENNA
LEAD-IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
■
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.
This background image is viewable on normal programs in the form of a stationary fixed image. This type of
irreversible LCD panel deterioration can be limited by observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
■
This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal of
these materials may be regulated in your community due to environmental considerations. For disposal or recycling
information please contact your local authorities, or the Electronics Industries Alliance:
www.eiae.org.
NOTE:
•
This equipment is designed to operate in the U.S.A. and other countries where the broadcasting
system and AC house current is exactly the same as in the U.S.A.
•
The marking or retained image on the LCD panel resulting from fixed image use is not an operating
defect and as such is not covered by Warranty. This product is not designed to display fixed image
patterns for extended periods of time.
4
Dear Panasonic Customer
Welcome to the Panasonic family of customers.
We hope that you will have many years of enjoyment from your new LCD TV.
To obtain maximum benefit from your set, please read these instructions before
making any adjustments, and retain them for future reference.
Retain your purchase receipt, and record the model number and serial number
of your set in the space provided on the rear cover of these instructions.
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. If this equipment does cause or receive interference, which can be determined by
turning equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the TV antenna.
Increase the separation between TV and other equipment.
Connect TV into separate outlet from other equipment.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A.)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com (Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca (Canada)
Federal Communication Commission Information
The Energy Star label, a symbol for energy efficiency, was created by the U.S.
Environmental Protection Agency (EPA) and the U.S. Department of Energy
(DOE) to help customers identify products that can save them money and protect
the environment by saving energy. Energy Star compliant products generally
consume less energy than similar standard products.
5
Table of Contents
Important Safety Instructions .............................. 2
Installation ............................................................. 6
SUPPLIED ACCESSORIES ................................ 7
Remote control battery installation ...................... 7
Maintenance .......................................................... 8
Connections .......................................................... 8
Antenna Connection ............................................ 8
Cable Box Connection ......................................... 9
Connecting Other Equipment ............................ 10
Connecting Headphones / Earphones ............... 11
Power ON / OFF ................................................... 12
Connecting the Plug to the Wall Outlet .............. 12
Turning the Power On ........................................ 12
Basic Controls ..................................................... 13
Menu Operations ................................................. 14
Tuning Channels................................................ 16
LOCK ................................................................. 18
CLOSED CAPTION ........................................... 22
INPUT LABEL .................................................... 23
OTHER ADJUST ............................................... 23
PICTURE ADJUST ............................................ 24
AUDIO ADJUST................................................. 25
ASPECT Controls ................................................ 26
Troubleshooting .................................................... 38
Specifications ........................................................ 39
Manual de instrucciones [ Resumen ]
Instalación de las pilas del mando a distancia .....
27
Ajuste el soporte con el ángulo deseado ...28
Conexión ..........................................................
29
Conexión de antena .....................................29
Conexión de antena / cable..........................29
Conexión del receptor de TV por cable
.......
30
Conexión de auriculares ...............................31
Conexión/desconexión de la alimentación ...
32
Conexión de la clavija a la toma de corriente ...
32
Cómo conectar la alimentación ....................32
Controles básicos.........................................33
Operaciones con menús ..............................34
Sintonización de canales..............................36
6
Installation
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will
fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive
heat or moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For
best performance, Antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from
your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various
components require. Also determine the length of cable you’ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed
clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.
How to use the LCD stand
Adjust the stand to your desired angle.
• TC-20LA2
The stand angle can be adjusted between 5° forward to 15° back, and rotated 30° to the right/left.
• TC-20LA2D
The stand angle is fixed 14° back.
30 30
Front
Front
Front
7
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precautions:
1. Always use new batteries when replacing the old set.
2. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3. Battery replacement is necessary when remote control acts sporadically or fails to operate this unit.
Notes:
• Do not drop, apply shock to or step on the remote control.
• Do not spill water on the remote control.
• Do not place objects between the remote control and remote control receiver.
• Do not use remote controls for other equipment at the same time.
•
If the TV does not operate even when using the remote control from a close range, it is time to replace the batteries.
Refer to the label on back of the remote control for directions on replacing batteries.
Requires two AA batteries.
1. Open the battery cover. 2. Install the batteries and replace the cover.
Note the correct polarity (+ and -).
Installation
Remote control battery installation
TV
Check the accessories before installations.
•
Operating Instruction book
• Remote Control Transmitter
(EUR7726020)
SUPPLIED ACCESSORIES
• Batteries for the Remote
Control Transmitter
(2 × AA size)
• Warranty Card
• Service Center List
(For U.S.A.)
• Customer Card
(For U.S.A.)
8
Maintenance
Antenna Terminal
on the Back of the TV
F-Type Antenna Adapter
CAUTION :
If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and
water solution or a weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using a chemically treated cloth, read the instructions that came
with the cloth carefully.
Mild
detergent
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an
outdoor antenna is recommended. The antenna mode must be set to TV (see page 16, MODE).
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
ANT
75 Ohm
Coaxial Cable
Mixer
UHF AntennaVHF Antenna
Antenna Terminal
F-Type Antenna
Adapter
Note:
Cables and adapters are not supplied with this set.
Connections
Incoming 75 Ohm Cable from Home
Antenna / Cable Company
Back of the TV
Antenna / Cable Connection
9
Connections
Cable Box
Cable Box and VCR
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
ANT
CABLE BOX
Incoming 75 Ohm Cable
from Home Antenna /
Cable Company
OUTPUT INPUT
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
ANT
OUTPUT
S VIDEO
VIDEO
L-AUDIO-R
VCR
CABLE BOX
Incoming 75 Ohm Cable
from Home Antenna /
Cable Company
OUTPUT INPUT
ANT OUTPUT
ANT INPUT
Back of the TV
Back of the TV
• For reception of cable channels (01 - 125), connect the cable supplied by your local cable company.
The antenna mode must be set to CABLE (see page 16, MODE).
• Certain cable systems offset some channels to reduce interference or have Premium (scrambled)
channels. A cable converter box is required for proper reception. Check with your local cable company
for its compatibility requirements.
• Set the TV channel to CH3 or CH4, cable when using this connection.
Cable Box Connection
10
Connecting Other Equipment
Connections
ANT
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPONENT VIDEO INPUT
INPUT
VIDEO
PrPbYL
R
L
R
Audio
OUT
S-Video
OUT
Video
OUT
COMPONENT VIDEO OUT
Audio
OUT
Notes:
• Only 480i and 480p are available through the component input terminals.
• When connecting video cables, priority is given to the S-Video cable when both the S-VIDEO input
terminal and the VIDEO input terminal are connected.
• With a monaural VCR, connect the monaural audio cable to the AUDIO-L terminal.
• Please make inquiries to video game manufacturers concerning component cables to connect with
video game console.
AUDIO
cable
DVD/STB
COMPONENT
VIDEO cable
AUDIO
cable
VIDEO
cable
S-VIDEO cable
Super-VHS VCR
CAMCORDER
VIDEO GAME
CONSOLE
11
Connections
M3 plug
(Not supplied)
Connecting Headphones / Earphones
To bundle the cables with the clamper
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
VHF UHF
Note:
• Do not put the antenna cable and the power cord together to avoid noise.
1. Pull upward. 2. Put the cables and close.
[TC-20LA2]
12
POWER
TV/VIDEO VOLUME CHANNEL
Power ON / OFF
Connecting the Plug to the Wall Outlet
1
2
VHF / UHF
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
Note:
• The TV consumes some power as long as the power cord is inserted into the wall outlet.
Turning the Power On
Press to turn the TV’s main power on/off.
• Power indicator
Main power ON: Green
Main power OFF: No light
The screen below is displayed for a while when the TV is
turned on.
Press to turn the TV on/off.
• Power indicator
Power ON: Green
Power OFF (Standby): Red
• This does not work when the main power is
off (No light) (see above).
CH 6
STEREO
SAP
MONO
4 : 3
Remote control
signal sensor
Main Power switch
Power Indicator
POWER
Note:
• Select the menu language before operating
the TV (see page 15, LANGUAGE).
e.g.
Power cord
AC120V, 60Hz
On the main unit
On the remote control
13
POWER
TV/VIDEO VOLUME CHANNEL
STEREO SAP MONO
Basic Controls
POWER button
Press to turn the TV on or off.
(see page 12)
Note:
This does not work when the main
power is off (No light).
Numbered buttons
TV/VIDEO button
Press to change the input mode.
R-TUNE button
Switches to previously viewed
channel or video mode.
MUTE button
Press to mute the sound.
Press again to cancel mute.
Mute is canceled when the power is turned off or
volume level is changed.
ASPECT button
(see page 26)
MENU button
(see page 14)
RETURN button
Press to return to the previous screen.
RECALL button
Press to display channel number,
sleep timer and other options.
SAP button
Press to select the audio mode. You can
also change the mode in the MENU
screen (see page 25).
Increases volume
Moves cursor to
the right during
menu mode.
Channel down
Moves cursor downward during menu
mode.
Channel up
Moves cursor upward during menu
mode.
Reduces volume
Moves cursor to
the left during
menu mode.
Remote control sensor
Within about 20 feet (6 meters) in front of the
TV set.
Main POWER switch
Press to turn the TV’s main power on/off.
(see page 12)
<Top Side Controls>
Channel Up/Down
Volume Up/Down
TV/VIDEO button
SLEEP button
Set the sleep time to turn the TV
into standby mode.
30 60
0
90
• When 3 minutes left, “ 3 ”
will flash. (“2” for 2 minutes
and “1” for 1 minute).
• The SLEEP timer is cancelled
when the power is turned off.
VIDEO1 VIDEO2
TV
COMPONENT
14
Menu Operations
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
or
Press to display MENU
screen.
1
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
ON SCREEN HELP ‘Instruction’ box
An On Screen Help box is displayed when a menu is displayed
on the TV. This Help box indicates which keys on the remote control
are used to navigate the menu shown.
MANUAL PROGRAM
ENTER CHANNEL
121
RETURN
DELETE
CH SELECT
ADD
2
15
Menu Operations
CLOSED CAPTION
MODE
OFF
ON MUTE
NO
(See page 22)
LANGUAGE
ENGLISH
LANGUAGE
Select the menu
language.
OFF ON
COOLCOOL
PICTURE ADJUST
NORMAL
PIC MODE
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
+ 30
0
0
0
0
0
OFF ON
STANDARD
(See page 24)
•
To return to the previous screen :
•
To exit the MENU screen: This returns to the normal viewing.
Press to select the MENU screen (ADJUST or SET UP).
Press to select the sub-menu feature.
Press to display the sub-menu screen.
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
ENTER CODE FIRST
OFF ON
(See page 18 - 21)
(See page 23)
(See page 25)
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
(See pages 16,17)
INPUT LABEL
VIDEO1
VIDEO2
COMPONENT
VIDEO1
VIDEO2
COMPONENT
(See page 23)
AUDIO ADJUST
NORMAL
MODE
BASS
TREBLE
STEREO SAP MONO
+ 4
+ 1
AUTO
OTHER ADJUST
VIDEO NR
OFF ON
3D Y/C FILTER
COLOR MATRIX
SD HD
POWER SAVE
STANDARD
OFF ON
16
Tuning Channels
Automatically scans and stores all the TV channels.
Notes:
• When any button is pressed during AUTO PROGRAM, the TV will return to the normal viewing.
(Channels searched up to the point are added.)
• After AUTO PROGRAM finishes, the lowest channel number added will be displayed.
• When there are no receivable channels, channel 69 (for TV) or channel 125 (for cable TV) is displayed.
Press to select PROGRAM CH.
Press to display the PROGRAM
CHANNELS screen.
2
3
Press to select MODE.
Press to select TV or CABLE.
4
Press to select AUTO PROGRAM.
Press to display the AUTO
PROGRAM screen.
5
Press to select YES.
Press to start AUTO PROGRAM.
Channels will automatically advance until all channels have been
scanned. Channel numbers with video signal received will be stored
in the Channel Memory.
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
AUTO PROGRAM
Activate
"AUTO PROGRAM?"
YES NO
AUTO PROGRAM
In "AUTO PROGRAM"
CHANNEL
59
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
Menu Operations
Automatic channel programming
Press the TV/VIDEO button to display the TV channel.
1
17
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
MANUAL PROGRAM
ENTER CHANNEL
121
Press to select MANUAL PROGRAM.
Press to display the MANUAL
PROGRAM screen.
4
Press to select the channel.
• You can also use the numbered
buttons.
5
6
Press to add the channel to the Channel
Memory (the channel number turns blue).
Press to delete the channel from the
Channel Memory (the channel number turns
yellow).
• Repeat steps 5 and 6 for other channels.
Manual channel programming
Add or delete a channel manually.
Menu operations
18
In the United States, the V-CHIP consists of two rating systems, which are MPAA (MOTION PICTURE)
and TV PARENTAL GUIDELINES. Its function is to block programs by the rating data in the XDS data
packets sent from broadcasting stations. The user can select which rating programs should be blocked
by the LOCK MENU options.
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
ENTER CODE FIRST
OFF ON
Input 4-digit code.
• To clear the numbers while entering the code, press
Up
or Down
.
• You will need the code to enter the LOCK menu.
• After entering your password for the first time, ENTER
CODE FIRST will change to CHANGE CODE.
Note:
Use a code that is easy to remember and record it in a
safe place.
Press to select LOCK.
Press to display the
LOCK screen.
3
Press to select BLOCK PROGRAMS.
Press to select U.S. MOVIES, U.S. TV
PROGRAMS, CANADIAN ENGLISH
or CANADIAN FRENCH.
4
Press to select STATUS.
Press to select ON or OFF.
Press to select CHANGE SETTING.
Press to enter the next menu.
5
LOCK
Menu Operations
2
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
CHANGE CODE
OFF ON
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
CHANGE CODE
OFF ON
LOCK
BLOCK PROGRAMS:
STATUS
U. S. MOVIES
CHANGE SETTING
CHANGE CODE
OFF ON
1
19
Press to select VIEW NR PROGRAMS?.
Press to select NO or YES.
NO :
Cannot view programs with NR signals.
YES : Can view programs with NR signal.
U.S. TV PROGRAM
VIEW NR PROGRAMS?
U. S. TV PROGRAMS
TV
—
G
TV
—
PG
TV
—
1 4
TV
—
MA
V
V
V
D
D
L
L
L
S
S
S
TV
—
Y
TV
—
Y7
FV
SETTING BASIC
NO YES
6
8
Press to select SETTING.
Press to select BASIC or DETAILED.
7
Press to select the rating.
BASIC : You can select the titles.
DETAILED : You can select the titles and options.
Press to lock or unlock the rating.
Lock: Red
Unlock : Green
• When a title field is selected, all ratings below this rating are
selected.
•
When options within an option field are selected, ratings below
this rating within the same field are selected.
Rating
1. Ratings for children: Divided into ranks as follows.
2. Ratings for teenagers: Created out of these major categories to form various combinations. These
combinations are described in the below diagram. Ratings for all ages are on top and ratings for
adults are on the bottom.
TV-Y
TV-YTV-Y7 TV-Y7 TV-Y7-FVFV
TV-G
TV-PG
TV-14
TV-MA
V
V
V
S
S
S
L
L
L
D
D
Menu Operations
Title Option
9
20
Menu Operations
U.S. MOVIES
6
7
Press to select the rating.
U. S. MOVIES
VIEW NR PROGRAMS?
NO YES
CANADIAN ENGLISH / CANADIAN FRENCH
6
Press to select VIEW E PROGRAMS?.
Press to select NO or YES.
CANADIAN FRENCH
VIEW E PROGRAMS?
NO YES
G
8 ANS
+
13ANS
+
16ANS
+
18ANS
+
CANADIAN ENGLISH
VIEW E PROGRAMS?
NO YES
C
C8
+
G
PG
14
+
18
+
Press to select VIEW NR PROGRAMS?.
Press to select NO or YES.
NO :
Cannot view programs with NR signals.
YES :
Can view programs with NR signals.
7
Press to select the rating.
Press to lock or unlock the rating.
Lock: Red
Unlock : Green
Rating
G : General audience
PG : Parental guidance suggested
PG-13 : Parental guidance needed
under 13 years old
R : Restricted
NC-17 : No one under 17 is admitted
X : Pornography
Press to lock or unlock the rating.
Lock: Red
Unlock : Green
21
Menu Operations
CANADIAN ENGLISH RATINGS CHART
Exempt - Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
Programming intended for children under age 8. No offensive language, nudity or sexual
content.
Programming contains themes or content which may not be suitable for viewers under
the age of 14. Parents are strongly cautioned to exercise discretion in permitting viewing
by pre-teens and early teens.
Programming generally considered acceptable for children 8 years and over. No profanity,
nudity or sexual content.
General programming, suitable for all audiences.
General programming, suitable for all audiences.
Parental Guidance suggested. Some material may not be suitable for children.
E
C
C8+
G
PG
14+
18+
CANADIAN FRENCH RATINGS CHART
General - Programming intended for audience of all ages. Contains no violence, or
the violence content is minimal or is depicted appropriately.
Programming may not be suitable for children under the age of 13 - Contains either a
few violent scenes or one or more sufficiently violent scenes to affect them. Adult
supervision strongly suggested.
8+ General - Not recommended for young children. Programming intended for a broad
audience but contains light or occasional violence. Adult supervision recommended.
Exempt - Exempt programming.
E
G
Programming may not be suitable for children under the age of 16 - Contains frequent
scenes of violence or intense violence.
16ANS+
18+ ans Programming restricted to adults. Contains constant violence or scenes of
extreme violence.
18ANS+
8 ANS+
13ANS+
22
Menu Operations
This unit has a built in decoder that provides a visual depiction of the audio portion of a television
program in the form of written words across the screen (white or colored letters on a black background).
It allows you to read the dialogue of a television program or other information.
Press to select CLOSED CAPTION.
Press to display the CLOSED
CAPTION screen.
1
2
Displays the On-Screen Closed Caption when the MUTE button is pressed. To delete the closed caption,
press the MUTE button again.
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
2
Press to select OFF, C1 or C2.
Displays the On-Screen Closed Caption.
CLOSED CAPTION
MODE
OFF
ON MUTE
NO
Press to select
CC
MODE.
• OFF -
• C1 -
• C2 -
Recommended mode when Closed Caption is not being used.
For video related information that can be displayed (up to 4
lines of script strategically placed on the television screen so
that it does not obstruct relevant parts of the picture).
Another mode used for video related information.
Press to select
CC
ON MUTE.
CLOSED CAPTION
MODE
OFF
ON MUTE
NO
Press to select NO (OFF), C1 or
C2.
CLOSED CAPTION
Notes:
• To activate this feature, set CC MODE to OFF .
• The program must have Closed Caption.
CC ON MUTE
CC MODE
23
Menu Operations
You can change the label of the video inputs to match with the connected device (VCR, DVD player etc.).
Press to select INPUT LABEL.
Press to display the INPUT LABEL screen.
1
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
INPUT LABEL
VIDEO1
VIDEO2
COMPONENT
VIDEO1
VIDEO2
COMPONENT
2
Press to select the video input
(VIDEO1, VIDEO2 or COMPONENT).
Press to select the INPUT LABEL.
(VIDEO1/VIDEO2/COMPONENT,
VCR, LD, GAME, DVD, DTV, SKIP
∗
or [BLANK])
∗ Select to skip unused video input when pressing TV/VIDEO button.
INPUT LABEL
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
Press to select OTHER ADJUST.
Press to display the OTHER ADJUST
screen.
1
Press to select the item.
2
Press to select the setting.
VIDEO NR
Reduce video noise in the picture.
3D Y/C FILTER
Minimizes noise and cross color in the picture. Not available for
COMPONENT VIDEO INPUT and S-VIDEO INPUT.
COLOR MATRIX
Displays input signals (480p signals) in a natural color. Automatically adjusts color parameters for HD
(high definition) and SD (standard definition).
POWER SAVE
The POWER SAVE mode is suitable for watching television at night. Power consumption will be reduced.
OFF
ON
OTHER ADJUST
VIDEO NR
OFF ON
3D Y/C FILTER
COLOR MATRIX
SD HD
POWER SAVE
STANDARD
OFF ON
SD HD
STANDARD
SAVING
OTHER ADJUST
OFF ON
24
Sub-menu
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
PICTURE ADJUST
1
2
Press to select PICTURE ADJUST.
Press to display the PICTURE
ADJUST screen.
Press to select the sub-menu.
Adjust the setting watching the picture
behind the menu.
Press to activate the setting if necessary.
PIC MODE
The picture mode is stored for TV, VIDEO1, VIDEO2 and COMPONENT individually.
BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI PICTURE
You can change the sub-menu settings (BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS and AI PICTURE) for each PIC MODE (STANDARD, CINEMA, and VIVID) according to your
personal preference.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
OFF ON
COOLCOOL
PICTURE ADJUST
NORMAL
PIC MODE
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI PICTURE
+ 30
0
0
0
0
0
OFF ON
STANDARD
Function
Luminance of the back light is adjusted.
Selects proper brightness and density for the room.
Adjusts for easier viewing of dark pictures such as night scenes.
Adjusts the level of color.
Adjusts for flesh tone color.
Adjusts the degree of sharpness.
Displays black and white more accurately when turned ON.
Function
Displays a clear screen with high contrast.
Displays a standard image.
Ideal for watching movies in a dark room.
MODE
VIVID
STANDARD
CINEMA
Menu Operations
NORMAL/NORMALIZE
Select “NORMALIZE” and press “OK” button to return each PIC MODE to the factory default setting.
Notes:
• “NORMAL” means the PIC MODE is in the factory default setting. “NORMAL” changes to
“NORMALIZE” when you change the setting of BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS or AI PICTURE.
• You can normalize each PIC MODE separately.
25
AUDIO ADJUST
1
2
Press to select AUDIO ADJUST.
Press to display the AUDIO ADJUST
screen.
Press to select the sub-menu.
Select the setting listening to the
sound.
Press to activate the setting if
necessary.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
AUDIO ADJUST
NORMAL
MODE
BASS
TREBLE
STEREO SAP MONO
+ 4
+ 1
AUTO
MODE
MODE
STEREO
SAP
MONO
Function
Two channel audio reception.
Second Audio Programming
(typically used for bilingual audio).
Select when stereo signal is weak.
Note:
• Red display : With signal
White display : No signal
White display (All modes) : MONO
• To change the mode using SAP
button (see page 13).
STEREO/SAP/MONO
BASS, TREBLE
You can change the level of each sub-menu (BASS and TREBLE) for each MODE (AUTO, STANDARD,
DYNAMIC and MUSIC) according to your personal preference.
Menu Operations
Sub-menu
BASS
TREBLE
Function
Adjusts low frequencies.
Adjusts high frequencies.
NORMAL/NORMALIZE
Select “NORMALIZE” and press “OK” button to return each MODE to the factory default setting.
Notes:
• “NORMAL” means the MODE is in the factory default setting. “NORMAL” changes to “NORMALIZE”
when you change the setting of BASS or TREBLE.
• You can normalize each MODE separately.
MODE
DYNAMIC
MUSIC
AUTO
STANDARD
Function
Gives contrast to sound.
For programs consisting mainly of music. Enhances high sounds (around 4 kHz).
Automatically adjusts for a wide Dynamic Range.
Emits the original sound.
26
ASPECT Controls
This feature allows you to enjoy viewing the picture at its maximum size, including wide screen cinema
format picture.
Each time you press the button:
Notes:
• The aspect setting is stored separately for VIDEO1, VIDEO2 and COMPONENT.
• In TV mode, the aspect is fixed at 4:3.
(For Video input only)
Explanation
4:3 mode will display a 4:3 picture at its standard
4:3 size without any stretching.
16:9 mode will display 16:9 aspect ratio picture.
Bars can be seen at the top and bottom of the
image (not available in TV mode).
Mode
4 : 3
16 : 9
Picture
4 : 3
16 : 9
16 : 9
4 : 3
27
Precauciones relacionadas con la utilización de las pilas
La instalación incorrecta de las pilas puede causar fugas en las mismas que podrían estropear el
transmisor de mando a distancia.
Tome las precauciones siguientes:
1. Utilice siempre pilas nuevas cuando reemplace las viejas.
2. No intente cargar, cortocircuitar, desarmar, calentar o quemar las pilas usadas.
3. Las pilas deberán cambiarse cuando el mando a distancia funcione esporádicamente o no pueda
controlar esta unidad.
Se necesitan dos pilas AA.
1. Abra la cubierta de las pilas.
2. Instale las pilas y vuelva a poner la tapa.
Tenga en cuenta las polaridades (+ y -)
al instalar las pilas.
Instalación de las pilas del mando a distancia
Manual de instrucciones [ Resumen ]
Estimado cliente de Panasonic
Bienvenido a la familia de clientes de Panasonic.
Esperamos sinceramente que disfrute durante muchos años de su nuevo Esperamos
sinceramente que disfrute durante muchos años de su nuevo televisor LCD.
Para obtener el máximo beneficio de su aparato, lea estas instrucciones antes de hacer
cualquier ajuste, y guárdelas para poder utilizarlas como referencia en el futuro.
Guarde también el recibo de su compra, y anote el número del modelo y el número de
serie de su aparato en el espacio provisto en la cubierta posterior de estas instrucciones.
28
30 30
• TC-20LA2
El ángulo del soporte se puede ajustar entre 5° hacia delante y 15° hacia atrás, y se puede girar 30° hacia
la derecha/izquierda.
Ajuste el soporte con el ángulo deseado
• TC-20LA2D
El ángulo del soporte está fijado en 14° hacia atrás.
Frente
Frente
Frente
29
Conexión de antena
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
ANT
Para recibir correctamente los canales de VHF/UHF se requiere una antena externa. Para obtener la
mejor recepción se recomienda utilizar una antena para exteriores. El modo de antena debe ajustarse a
TV (consulte la página 36, MODO).
Cable entrante de 75 ohmios procedente de la antena
del hogar/compañía de televisión por cable
Terminal de antena
en la parte posterior del televisor
Adaptador de antena tipo F
Antena de VHF Antena de UHF
Cable coaxial
de 75 ohmios
Mezclador
Terminal de antena
Adaptador de antena
tipo F
Nota:
Con este aparato no se suministran cables ni adaptadores.
La parte posterior del televisor
Conexión
Conexión de antena / cable
30
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
ANT
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
ANT
OUTPUT
S VIDEO
VIDEO
L-AUDIO-R
Receptor de TV por cable
Cable Box and VCR
Receptor de TV por cable
Cable entrante de 75
ohmios procedente de la
antena del hogar/
compañía de televisión
por cable
OUTPUT INPUT
Videograbadora
Receptor de TV por cable
Cable entrante de 75
ohmios procedente de la
antena del hogar/
compañía de televisión
por cable
OUTPUT INPUT
ANT OUTPUT
ANT INPUT
La parte posterior del televisor
La parte posterior del televisor
• Para recibir los canales de televisión por cable (01 - 125) conecte el cable suministrado por su compañía
de televisión por cable. El modo de antena debe ajustarse a CABLE (consulte la página 36, MODO).
• Ciertos sistemas de televisión por cable neutralizan algunos canales para reducir interferencias o tienen
canales especiales (codificados). Para recibir correctamente estos canales se necesita un sintonizador
de conversión de televisión por cable. Póngase en contacto con su compañía de televisión por cable para
conocer los requerimientos de compatibilidad.
• Ponga el canal del televisor en CH3 o CH4 cuando utilice esta conexión.
Conexión del receptor de TV por cable
Conexión
31
Conexión de auriculares
(No suministrado)
Clavija M3
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
VHF UHF
Nota:
• No ponga el cable de la antena y el cable de la alimentación juntos para evitar ruidos.
1. Tire hacia arriba. 2. Ponga juntos los cables y
cierre la abrazadera.
Para unir y atar los cables con la abrazadera
[TC-20LA2]
Conexión
32
POWER
TV/VIDEO VOLUME CHANNEL
POWER
Conexión/desconexión de la alimentación
Conexión de la clavija a la toma de corriente
Cómo conectar la alimentación
Púlselo para conectar/desconectar la
alimentación principal del televisor.
• Indicador de la alimentación
Alimentación principal conectada: Verde
Alimentación principal desconectada: Apagado
Ej.:
Sensor de
mando a
distancia
Interruptor POWER principal
Indicador de la alimentación
Púlselo para encender/apagar el televisor.
• Indicador de la alimentación
Encendido: Verde
Apagado (En espera): Rojo
• Esto no funciona cuando la alimentación
principal está desconectada (apagado)
(consulte arriba).
Nota:
• Seleccione el idioma de menú antes de utilizar
el televisor (consulte la página 35, Idioma).
Canal 6
ESTEREO
SPA
MONO
4 : 3
1
2
VHF / UHF
AUDIO
VIDEO S-VIDEO
R
RL
L
Y
P
B
P
R
1
2
AUDIO
COMPORNENT VIDEO INPUT
INPUT
VIDEO
Nota:
• El televisor consumirá algo de corriente siempre que el enchufe del cable de alimentación esté introducido
en la toma de corriente.
Cable de alimentación
CA 120 V, 60 Hz
En el aparato principal
En el mando a distancia
La pantalla de abajo se visualiza durante un rato cuando
se enciende el televisor.
33
POWER
TV/VIDEO VOLUME CHANNEL
Controles básicos
Sensor de mando a distancia
Dentro de 20 pies (6 metros) a partir del
panel delantero del televisor.
Interruptor POWER principal
Púlselo para conectar/desconectar la
alimentación principal del televisor
(consulte la página 32).
<Controles del lado superior>
Canal superior/inferior
Subida/bajada del volumen
Botón TV/VIDEO
Botón SLEEP
Ponga el tiempo tras el cual el
televisor se pondrá en el modo de
espera.
•
Cuando queden 3 minutos parpadeará
“
3” (“2” para 2 minutos y “1” para 1
minuto).
•
El temporizador de cancelado se
cancelará cuando se desconecte la
alimentación.
Botón de la alimentación
Púlselo para encender o apagar el
televisor (consulte la página 32).
Nota:
Esto no funciona cuando la
alimentación principal está
desconectada (apagado).
Botones numerados
Botón TV/VIDEO
Púlselo para cambiar el modo de
entrada.
Botón R-TUNE
Para cambiar a un canal o modo
de vídeo anterior.
Botón MUTE
Púlselo para silenciar el sonido.
Púlselo de nuevo para cancelar el silenciamiento.
El silenciamiento se cancela cuando se desconecta la
alimentación o se cambia en nivel del sonido.
Botón ASPECT
Botón MENU
(consulte la página 34)
Botón RETURN
Púlselo para volver a la pantalla
anterior.
Botón RECALL
Púlselo para visualizar el número
del canal, el temporizador de
cancelado y otras opciones.
Botón SAP
Púlselo para seleccionar el modo de
audio. También puede cambiar el
modo en la pantalla MENU
(consulte la página 35).
ESTEREO SPA MONO
30 60
0
90
Aumenta el volumen
Mueve el cursor
hacia la derecha
durante el
modo
del menú.
Canal inferior
Mueve el cursor hacia abajo durante
el modo del menú.
Canal superior
Mueve el cursor hacia arriba durante el
modo del menú.
Reduce el volumen
Mueve el cursor
hacia la izquierda
durante el
modo
del menú.
4 : 3 16 : 9
Video1 Video2
TV
Componente
34
Operaciones con menús
Púlselo para visualizar la
pantalla MENU.
1
MENU
Ajuste
Imagen
Sonido
Configu.
Ajuste Imagen
Ajuste Sonido
Cuadro de instrucciones de ayuda en pantalla
Cuando se visualiza un menú en el televisor aparece un cuadro
de ayuda en la pantalla. Este cuadro de ayuda indica qué teclas
del mando a distancia se utilizan para navegar por el menú
mostrado.
PROGRAMA MANUAL
Entre Canal
121
VUELVE
ANULAR
SEL CANAL
MENU
Ajuste Configu.
MENU
Ajuste
Imagen
Sonido
Configu.
Ajuste Imagen
Ajuste Sonido
MENU
Ajuste Configu.
MENU
Ajuste
Imagen
Sonido
Configu.
Ajuste Imagen
Ajuste Sonido
o
2
35
•
Para volver a la pantalla anterior :
•
Para salir de la pantalla MENU :
Púlselo para seleccionar la pantalla MENU (Ajuste o Configu.).
Púlselo para seleccionar la función de menú secundario.
Púlselo para visualizar la pantalla de menú secundario.
Con esto se retorna a la visión normal.
No
MODO
No
EN MUDO
Idioma
Idioma
Seleccione el idioma del
menú.
Ajuste Imagen
Normal
Imagen
Luz Posterior
CONTRASTE
BRILLO
COLOR
TINTE
NITIDEZ
Imagen IA
+ 30
0
0
0
0
0
Normal
No Si
Bloqueo
Programas:
Activado
Modificar
INGRESAR CLAVE
No Si
Otro Ajuste
REDUC DE RUIDO
Matriz Color
DS HD
ECON ENERGíA
ESTÁNDAR
No Si
3D Y/C Filtro
No Si
Ajuste Sonido
Normal
Sonido
BAJOS
ALTOS
ESTEREO SPA MONO
+ 4
+ 1
Auto
Prog. Canales
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
TV
CABLE
Video1
Video2
Componente
Video1
Video2
Componente
Operaciones con menús
36
Sintonización de canales
Explora y guarda automáticamente todos los canales de TV.
Notas:
• Cuando se pulse cualquier botón durante PROGRAMA AUTO, el televisor volverá a mostrar la imagen
normal. (Los canales encontrados hasta ese punto se añaden.)
• Después de terminar PROGRAMA AUTO se visualizará el número del canal más bajo añadido.
• Cuando no haya canales que puedan recibirse, se visualizará el canal 69 (para TV) o el canal 125 (para
TV por cable).
Pulse para seleccionar Prog. Canales.
Pulse para visualizar la pantalla
Prog. Canales.
2
3
Pulse para seleccionar MODO.
Pulse para seleccionar TV o CABLE.
4
Pulse para seleccionar PROGRAMA AUTO.
Púlselo para visualizar la pantalla
PROGRAMA AUTO.
5
Púlselo para seleccionar Si.
Púlselo para iniciar PROGRAMA AUTO.
Los canales avanzarán automáticamente hasta que todos ellos hayan
sido explorados. Los números de los canales con señal de vídeo
recibida se guardarán en la memoria de canales.
MENU
Ajuste Configu.
PROGRAMA AUTO
Activar
"PROGRAMA AUTO?"
Si No
PROGRAMA AUTO
En Programa Auto
Canal 59
Prog. Canales
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
TV
CABLE
Operaciones con menús
Programación automática de canales
Pulse el botón TV/VIDEO para visualizar el canal de TV.
1
37
Pulse para seleccionar PROGRAMA
MANUAL.
Pulse para visualizar la pantalla
PROGRAMA MANUAL.
4
Pulse para seleccionar canal.
• También puede utilizar los botones numerados.
5
6
Púlselo para añadir el canal a la memoria de canales
(el número del canal se pone de color azul).
Púlselo para borrar el canal de la memoria de
canales (el número del canal se pone amarillo).
• Repita los pasos 5 y 6 para otros canales.
Añada o borre un canal manualmente.
Prog. Canales
MODO
PROGRAMA AUTO
PROGRAMA MANUAL
TV
CABLE
PROGRAMA MANUAL
Entre Canal
121
Operaciones con menús
Programación automática de canales
38
Troubleshooting
If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out
the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting
the model number and serial number (both found on the rear of the TV).
Symptoms
Checks
Antenna location, direction or connection
Picture Sound
Aerial location, direction or connection
Electrical appliances
Cars / Motorcycles
Fluorescent lights
Volume level
Sound mute switched on.
Color controls set at minimum levels.
Weak signal.
Retune Channel (s).
Sound reception may have deteriorated.
Switch STEREO mode (AUDIO ADJUST menu) to
Off until reception improves.
Noisy Sound
Normal Sound
No Sound
No Sound
Normal Sound
Noisy Sound
Weak or No Sound
Weak or No Sound
Interference
Multiple Image
Normal Picture
No Picture
No Colour
Snowy Picture
Normal Picture
Poor or Distorted Picture
Cannot operate with the remote control.
The battery is exhausted.
The battery’s polarity is wrong.
The remote control sensor is exposed to strong light of a
fluorescent lamp, etc.
The main unit is hot.
The main unit radiates heat and some of the parts may
become hot. This is not a problem for performance or quality.
Set up at a location with good ventilation.
Do not cover the ventilation holes of the TV with a
tablecloth etc., and do not place on top of other equipment.
There may be red spots, blue spots, green
spots and black spots on the screen.
This is a characteristic of liquid crystal panels and is not a
problem. The liquid crystal panel is built with very high
precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on the
screen as a fixed point of red, blue, green, or black.
Please note this does not affect the performance of your LCD.
TV set to AV mode.
Not plugged into AC outlet.
Not switched on.
Picture / Sound controls set at minimum levels.
Check if in Standby mode.
39
Note:
Design and specifications are subject to change without notice. Weight and dimensions shown are approximate.
Specifications
AC 120 V, 60 Hz
VHF-12 : UHF-56 : Cable-125
4 cm, 2 pcs, 16 Ω
M3 (3.5 mm) Jack × 1
3D Y/C Digital Comb Filter
CLOSED CAPTION V-Chip
Temperature : 41 °F - 95 °F (5 °C – 35 °C)
Humidity : 5 % - 90 % RH (non-condensing)
VIDEO (RCA PIN Type × 1) × 2 1.0 Vp-p
(75
Ω
)
S-VIDEO (MINI DIN 4pin × 1) × 2
Y : 1 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω)
AUDIO L-R (RCA PIN Type × 2) × 2
0.5 Vrms
Y
1.0 Vp-p (including synchronization)
P
B
/ P
R
±
0.35
Vp-p
AUDIO L-R (RCA PIN Type × 2)
0.5 Vrms
Power Source
Power Consumption
LCD
Screen Size
Channel Capability
Sound
Speaker
Headphones
FEATURES
Operating Conditions
Connection Terminals
INPUT
COMPONENT
VIDEO INPUT
Dimensions ( W
××
××
× H
××
××
× D )
Including TV Stand
TV Set Only
Mass (Weight)
Average use : 65 W
Stand-by condition : 0.11 W
Power off : 0.08 W
20-inch (510 mm), 4:3 aspect ratio LCD panel
16.06 ″ (408.0 mm) (W) × 12.05 ″ (306.0 mm) (H)
19 39/64 ″ (498 mm) ×
19 59/64 ″ (506 mm) ×
10 9/32 ″ (260 mm)
19 39/64 ″ (498 mm) ×
17 23/32 ″ (450 mm) ×
3 35/64 ″ (90 mm)
16.8 lb. (7.6 kg) Net
TC-20LA2
TC-20LA2D
19 39/64 ″ (498 mm) ×
17 29/32 ″ (455 mm) ×
7 31/64 ″ (190 mm)
14.1 lb. (6.4 kg) Net
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus
New Jersey 07094
Panasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico Inc. (“PSC”)
Ave. 65 de Infanteria, Km 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Printed in Japan
MBS0204S0
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Customer’ Record
The model number and serial number of this product can be found on its rear panel. You should
note this serial number in the space provided below and retain this book, plus your purchase
receipt, as a permanent record of your purchase to aid in identification in the event of theft or
loss, and for Warranty Service purposes.
Model Number Serial Number
2004 Matsushita Electric Industrial Co.,Ltd. All Rights Reserved.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
Panasonic TC20LA2D - 20" LCD TV Instrucciones de operación
- Categoría
- Equipo de música suplementario
- Tipo
- Instrucciones de operación
en otros idiomas
Artículos relacionados
-
Panasonic TC20LB30 Instrucciones de operación
-
-
-
-
-
-
-
Panasonic TC32LX20 Instrucciones de operación
-
Panasonic TC-32LX70 El manual del propietario