GE Lighting 82003LO Manual de usuario

  • Hola, he leído el manual de usuario del Decoración LED 82003LO y estoy listo para responder a tus preguntas acerca de su montaje. El documento proporciona instrucciones de ensamblaje paso a paso, incluyendo cómo insertar las diferentes partes y conectar los cables de alimentación. También describe cómo fijar el producto utilizando las estacas proporcionadas.
  • ¿Qué partes se insertan en el paso 1?
    ¿Qué se hace en el paso 2?
    ¿Qué se fija en el paso 5?
NHL Model No. 82003LO
Step 4
Step 1
Step 1: Insert part B into C according to the figure, and tighten the
screw to lock. Connect the male and female power cables.
Step 3: Insert part A into B according to the figure, and tighten the
screw to lock. Connect the male and female power cables.
Step 4: Insert part D into B according to the figure, and tighten the
screw to lock. Connect the male and female power cables.
Step 5: Fix the four stakes at E and C according to the figure.
Step 2: Insert B into part E according to the figure, and tighten the
screw to lock. Insert the hook into the hole.
Step 2
A
B
C
D
E
Step 3
Step 5
GE SB 48-IN NEON FLEX LED DEER
NHL Modelo No. 82003LO
Step 4
Step 1
Step 1: Insertar la parte B en C de acuerdo con la figura, y apre.
Tornillo a cerrar. Conecte los cables de alimentación macho
y hembra.
Step 3: Insertar la parte A en B de acuerdo con la figura, y apretar el
Tornillo a cerrar. Conecte los cables de alimentación macho
y hembra.
Step 4: Acuerdo con la figura, y apretar el Tornillo a cerrar. Conecte
los cables de alimentación macho y hembra.
Step 5: Fijar las cuatro estacas en E y C según la figura.
Step 2: Insertar B en la parte E de acuerdo a la figura, y apre.
Tornillo a cerrar. Inserte el gancho en el agujero.
Step 2
A
B
C
D
E
Step 3
Step 5
GE SB 48-IN NEON FLEX LED DEER
1/2