CEN-TECH 60581 El manual del propietario

Marca: CEN-TECH

Modelo: 60581

Categoría: Cargadores de batería de coche

Tipo: El manual del propietario

Este manual también es adecuado para

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5

65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5

Owner’s Manual & Safety Instructions

Save This Manual%Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 17i

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2012 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly an d se rv ic e may n ot b e in cl uded.

;*,9%$."#%5,$*(",7%+*2&(*%'#"83%$."#%/(&9'4$1%

<,"7'(*%$&%9&%#&%4,8%(*#'7$%"8%#*("&'#%"8='(>1%

?@!6%ABC?%D@EF@G1

Page 2 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 60581

?@<6AQ RS6;@ACRE D@CEA6E@ET6?S6TC<CT@ACRE?

A,+7*%&2%T&8$*8$#

Safety ......................................................... 2

Specifications ............................................. 6

Operation .................................................... 6

Maintenance .............................................. 11

Warranty .................................................... 12

U@;ECEV%?QDWRG?%@EX%X6<CECACRE?

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Canadian Standards Association

Underwriters Laboratories, Inc.

!@T

Volts Alternating Current

Amperes

TT@

Cold Cranking Amps

Reserve Capacity

Ampere-hours

WARNING marking

concerning Risk of Eye Injury.

Wear ANSI-approved

splash-resistant safety goggles.

Read the manual before

set-up and/or use.

WARNING marking

concerning Risk of Fire.

Follow connection procedure.

Page 3<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 60581

?@<6AQRS6;@ACRED@CEA6E@ET6 ?S6TC<CT@ACRE?

CDSR;A@EA%?@<6AQ%CE?A;FTACRE?

1. ?@!6%AB6?6%CE?A;FTACRE? –

This manual contains important safety and

operating instructions for this battery charger.

2. Do not expose charger to rain or snow.

3. Use of an attachment not recommended or sold

by the battery charger manufacturer may result in

a risk of fire, electric shock, or injury to persons.

4. To reduce risk of damage to electric

plug and cord, pull by plug rather than

cord when disconnecting charger.

5. An extension cord should not be used unless

absolutely necessary. Use of improper extension

cord could result in a risk of fire and electric shock.

If an extension cord must be used, make sure:

a. That pins on plug of extension cord

are the same number, size, and shape

as those of plug on charger;

b. That extension cord is properly wired

and in good electrical condition; and

c. That wire size is large enough for AC ampere

rating of charger as specified in Table A.

A,+7*%@-%%;*4&55*89*9%5"8"5'5%@UV%#"Y*%

2&(%*Z$*8#"&8%4&(9#%2&(%+,$$*(>%4.,(3*(#

@T%"8/'$%(,$"83I%,5/*(*#[

@UV%#"Y*%&2%4&(9

G*83$.%&2%4&(9I%2**$

6H',7%$&%&(%

3(*,$*(%$.,8

W'$%7*##%

$.,8

\N N] J]] JN]

0 2 18 18 18 16

2 3 18 18 16 14

3 4 18 18 16 14

4 5 18 18 14 12

5 6 18 16 14 12

6 8 18 16 12 10

8 10 18 14 12 10

10 12 16 14 10 8

12 14 16 12 10 8

14 16 16 12 10 8

16 18 14 12 8 8

18 20 14 12 8 6

* If the input rating of a charger is given in watts rather than in

amperes, the corresponding ampere rating is to be determined by

dividing the wattage rating by the voltage rating – for example:

1250 watts/125 volts = 10 amperes

6. Do not operate charger with damaged cord or plug

– replace the cord or plug immediately.

7. Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in

any way; take it to a qualified serviceman.

8. Do not disassemble charger; take it to a

qualified serviceman when service or repair

is required. Incorrect reassembly may

result in a risk of electric shock or fire.

9. To reduce risk of electric shock, unplug charger

from outlet before attempting any maintenance or

cleaning. Turning off controls will not reduce this risk.

10. WARNING – RISK OF EXPLOSIVE GASES.

a. WORKING IN VICINITY OF A LEAD-ACID

BATTERY IS DANGEROUS. BATTERIES

GENERATE EXPLOSIVE GASES DURING

NORMAL BATTERY OPERATION. FOR THIS

REASON, IT IS OF UTMOST IMPORTANCE

THAT YOU FOLLOW THE INSTRUCTIONS

EACH TIME YOU USE THE CHARGER.

b. To reduce risk of battery explosion, follow

these instructions and those published by

battery manufacturer and manufacturer of

any equipment you intend to use in vicinity

of battery. Review cautionary marking

on these products and on engine.

11. PERSONAL PRECAUTIONS

a. Consider having someone close

enough by to come to your aid when

you work near a lead-acid battery.

b. Have plenty of fresh water and soap nearby in

case battery acid contacts skin, clothing, or eyes.

c. Wear complete eye protection and

clothing protection. Avoid touching

eyes while working near battery.

d. If battery acid contacts skin or clothing,

wash immediately with soap and water.

If acid enters eye, immediately flood eye with

running cold water for at least 10 minutes

and get medical attention immediately.

e. NEVER smoke or allow a spark or flame

in vicinity of battery or engine.

f. Be extra cautious to reduce risk of dropping

a metal tool onto battery. It might spark

or short-circuit battery or other electrical

part that may cause explosion.

g. Remove personal metal items such as rings,

bracelets, necklaces, and watches when

working with a lead-acid battery. A lead-

acid battery can produce a short-circuit

current high enough to weld a ring or the

like to metal, causing a severe burn.

Page 4 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 60581

?@<6AQ RS6;@ACRE D@CEA6E@ET6?S6TC<CT@ACRE?

h. Use charger for charging a LEAD-ACID battery

only. It is not intended to supply power to a

low voltage electrical system other than in a

starter-motor application. Do not use battery

charger for charging dry-cell batteries that

are commonly used with home appliances.

These batteries may burst and cause injury

to persons and damage to property.

i. NEVER charge a frozen battery.

12. PREPARING TO CHARGE

a. If necessary to remove battery from vehicle

to charge, always remove grounded terminal

from battery first. Make sure all accessories in

the vehicle are off, so as not to cause an arc.

b. Be sure area around battery is well

ventilated while battery is being charged.

c. Clean battery terminals. Be careful to keep

corrosion from coming in contact with eyes.

d. Add distilled water in each cell until battery

acid reaches level specified by battery

manufacturer. Do not overfill. For a battery

without removable cell caps, such as valve

regulated lead acid batteries, carefully follow

manufacturer’s recharging instructions.

e. Study all battery manufacturer’s

specific precautions while charging and

recommended rates of charge.

f. Charge battery initially at lowest rate.

13. CHARGER LOCATION

a. Locate charger as far away from

battery as DC cables permit.

b. Never place charger directly above

battery being charged; gases from battery

will corrode and damage charger.

c. Never allow battery acid to drip on

charger when reading electrolyte

specific gravity or filling battery.

d. Do not operate charger in a closed-in

area or restrict ventilation in any way.

e. Do not set a battery on top of charger.

14. DC CONNECTION PRECAUTIONS

a. Connect and disconnect DC output clips only

after removing AC cord from electric outlet.

Never allow clips to touch each other.

b. Attach clips to battery and chassis as indicated

in 15(e), 15(f), and 16(b) through 16(d).

15. FOLLOW THESE STEPS WHEN BATTERY

IS INSTALLED IN VEHICLE. A SPARK NEAR

BATTERY MAY CAUSE BATTERY EXPLOSION.

TO REDUCE RISK OF A SPARK NEAR BATTERY:

a. Position AC and DC cables to reduce risk of

damage by hood, door, or moving engine part.

b. Stay clear of fan blades, belts, pulleys, and

other parts that can cause injury to persons.

c. Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has larger

diameter than NEGATIVE (NEG, N,–) post.

d. Determine which post of battery is

grounded (connected) to the chassis. If

negative post is grounded to chassis (as

in most vehicles), see (e). If positive post

is grounded to the chassis, see (f).

e. For negative-grounded vehicle, connect

POSITIVE (RED) clip from battery charger

to POSITIVE (POS, P, +) ungrounded post

of battery. Connect NEGATIVE (BLACK)

clip to vehicle chassis or engine block

away from battery. Do not connect clip to

carburetor, fuel lines, or sheet-metal body

parts. Connect to a heavy gauge metal

part of the frame or engine block.

f. For positive-grounded vehicle, connect

NEGATIVE (BLACK) clip from battery charger

to NEGATIVE (NEG, N, –) ungrounded post of

battery. Connect POSITIVE (RED) clip to vehicle

chassis or engine block away from battery.

Do not connect clip to carburetor, fuel lines, or

sheet-metal body parts. Connect to a heavy

gauge metal part of the frame or engine block.

g. When disconnecting charger, disconnect AC cord,

remove clip from vehicle chassis, and

then remove clip from battery terminal.

h. See operating instructions for

length of charge information.

16. FOLLOW THESE STEPS WHEN BATTERY

IS OUTSIDE VEHICLE. A SPARK NEAR THE

BATTERY MAY CAUSE BATTERY EXPLOSION.

TO REDUCE RISK OF A SPARK NEAR BATTERY:

a. Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has a larger

diameter than NEGATIVE (NEG, N, –) post.

b. Attach at least a 24-inch-long 6-gauge

(AWG) insulated battery cable to

NEGATIVE (NEG, N, –) battery post.

c. Connect POSITIVE (RED) charger clip to

POSITIVE (POS, P, +) post of battery.

Page 5<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 60581

?@<6AQRS6;@ACRED@CEA6E@ET6 ?S6TC<CT@ACRE?

d. Position yourself and free end of cable

as far away from battery as possible

– then connect NEGATIVE (BLACK)

charger clip to free end of cable.

e. Do not face battery when

making final connection.

f. When disconnecting charger,

always do so in reverse sequence of connecting

procedure and break first connection while

as far away from battery as practical.

g. A marine (boat) battery must be removed and

charged on shore. To charge it on board requires

equipment specially designed for marine use.

17. Wear ANSI-approved splash-resistant

safety goggles and heavy-duty rubber

work gloves whenever connecting,

disconnecting, or working near battery.

Battery acid can cause

permanent blindness.

18. Do not use Start setting to charge

batteries. Use to jump start only.

19. Maintain labels and nameplates on the charger.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

20. This product is not a toy.

Keep it out of reach of children.

21. Unplug the Battery Charger from its

electrical outlet before connecting its cables

to a battery, or performing any inspection,

maintenance, or cleaning procedures.

22. @7$.&'3.%$."#%T.,(3*(%.,#%,8%,'$&5,$"4%4'$%&22^%

9&%ERA%9*/*89%#&7*7>%&8%,'$&5,$"4%4'$%&221%%%

G*,_"83%T.,(3*(%'8,$$*89*9%4,8%(*#'7$%

"8%2"(*%,89%/(&/*($>%9,5,3*1

23. F#*%$."#%T.,(3*(%)"$.%27&&9*9%7*,9K,4"9%&(%

@VD%+,$$*("*#%&87>1

When charging a maintenance-free battery,

always monitor the progress of

the charge by viewing the Charge Meter.

Do not overcharge a maintenance-free battery.

XR%ERA%F?6%UCAB%V6G%W@AA6;C6?1

24. Do not attempt to charge non-rechargeable

or defective batteries.

25. Do not charge more than one battery at one time.

26. Have your charger serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of

the charger is maintained.

27. Do not use charger while you are tired or under

the influence of drugs, alcohol or medication.

A moment of inattention while operating charger

may result in serious personal injury.

28. Before moving charger, disconnect power supply

and battery, then allow charger to cool.

29. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields in

close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure.

In addition, people with pacemakers should:

• Avoid operating alone.

• Properly maintain and inspect

to avoid electrical shock.

• Properly ground power cord. Ground Fault Circuit

Interrupter (GFCI) should also be implemented

– it prevents sustained electrical shock.

30. The warnings, precautions, and instructions

discussed in this instruction manual cannot

cover all possible conditions and situations

that may occur. It must be understood by the

operator that common sense and caution are

factors which cannot be built into this product,

but must be supplied by the operator.

%?@!6%AB6?6%CE?A;FTACRE?1

V(&'89"83%,89%@T%S&)*(%T&(9%T&88*4$"&8%C8#$('4$"&8#

Charger should be grounded to reduce risk of electric

shock. Charger is equipped with an electric cord

having an equipment-grounding conductor and a

grounding plug. The plug must be plugged into an

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

X@EV6; – Never alter AC cord or plug provided

– if it will not fit outlet, have proper outlet installed

by a qualified electrician. Improper connection

can result in a risk of an electric shock.

T@FACRE%`%;"#a%&2%<"(*%&(%67*4$("4%?.&4a1%

Connect battery charger directly to grounding

receptacle (three-prong). An adapter should

not be used with battery charger.

Page 6 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 60581

?@<6AQ RS6;@ACRE D@CEA6E@ET6?S6TC<CT@ACRE?

?/*4"2"4,$"&8#

Input 120VAC, 60Hz, 2.2A

Output 12 VDC -% 10*%A

12 VDC -% 2*%A

12 VDC Engine Start -% 50% A

[@5/*(,3*%"#%&87>%/(*#*8$%).*8%$.*%'8"$%"#%

4&88*4$*9%$&%,%+,$$*(>%&(%"8%?A@;A%5&9*1

R/*(,$"&8%C8#$('4$"&8#

% ;*,9%$.*%6EAC;6%CDSR;A@EA%?@<6AQ%CE<R;D@ACRE%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*Z$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

AR%S;6!6EA%?6;CRF?%CEbF;Q-%

XR%ERA%SGFV%CE%TB@;V6;%FEACG%XC;6TA6X%AR%XR%?R1

T&8$(&7#

U"("83%

T&88*4$"&8

?*$$"83%

#)"$4.

A>/*%

#)"$4.

T.,(3*%

D*$*(

T.,(3*%

?$,$'#

<"3'(*%@-%%T&8$(&7#

U"("83%T&88*4$"&8-

This indicates that the cables are connected improperly.

Immediately disconnect the cables and connect

them properly to prevent damage to the battery.

T.,(3*%?$,$'#-

This will light up red when the power is connected.

This will light up green when the battery is fully charged.

This is disabled in start mode.

?*$$"83%#)"$4.-

Use this to switch between charging and start modes

and change the output amperage.

W,$$*(>%A>/*%#)"$4.-

Use this to set the battery type:

• Set to Regular for flooded and maintenance-free batteries.

• Set to AGM for Absorbed Glass Mat batteries.

U@;ECEVc%%AR%S;6!6EA%6dSGR?CRE-%

XR%ERA%F?6%UCAB%V6G%W@AA6;C6?1

T.,(3*%D*$*(%eJ]%,5/%4.,(3*%5&9*%&87>f-

J]] ON N] \N ]

TB@;V6%G6!6G%g

<"3'(*%W-%%XC?TB@;V6X%W@AA6;Q

Initial charge current to the battery is at maximum.

J]] ON N] \N ]

TB@;V6%G6!6G%g

<CVF;6%T-%%W@AA6;Q%@GDR?A%<FGGQ%TB@;V6X

Charge current to the battery is reduced.

J]] ON N] \N ]

TB@;V6%G6!6G%g

<"3'(*%X-%%<FGGQ%TB@;V6X%W@AA6;Q

Charge current to the battery is minimal

and the green LED is on.

Page 7<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 60581

?@<6AQRS6;@ACRED@CEA6E@ET6 ?S6TC<CT@ACRE?

Sometimes conditions such as a cold battery, a sulfated battery, or a deeply discharged lead calcium

battery may cause Charge Meter to read near a full charge when charging process is only beginning.

E&$*- The Charge Meter shows the amount of current being drawn from the charger. It does not show what the

charger is capable of delivering. When the battery is fully charged and registering 100% on the Charge Meter,

a small charge will continue to move from the charger to the battery. If the charger is not disconnected from the

battery, eventually heat build up will cause the battery acid to boil and overcharge the battery causing damage to

the battery. Monitor battery charging progress constantly and if battery gets warm, stop charging it immediately.

S(*/,("83%$&%T.,(3*

F#*%$."#%4.,(3*(%&87>%&8%27&&9*9%7*,9K,4"9%+,$$*("*#1%%%

R$.*(%+,$$*("*#%5,>%+*%9,5,3*9%&(%5,>%&_*(.*,$I%7*,aI%&(%4,$4.%2"(*1

AR%S;6!6EA%?6;CRF?%CEbF;Q-%

U*,(%@E?CK,//(&_*9%#/7,#.K(*#"#$,8$%#,2*$>%3&337*#%,89%.*,_>K9'$>%('++*(%)&(a%37&_*#%

).*8*_*(%4&88*4$"83I%9"#4&88*4$"83I%&(%)&(a"83%8*,(%+,$$*(>1%%%

W,$$*(>%,4"9%4,8%4,'#*%/*(5,8*8$%+7"898*##1

1. If necessary to remove battery from vehicle to

charge, always remove grounded terminal from

battery first. Make sure all accessories in the

vehicle are off, so as not to cause an arc.

2. Make sure area around battery is well

ventilated while battery is being charged.

3. Clean battery terminals. Be careful to keep

corrosion from coming in contact with eyes.

4. Add distilled water in each cell until battery acid

reaches level specified by battery manufacturer.

Do not overfill. For a battery without

removable cell caps, such as valve

regulated lead acid batteries, carefully follow

manufacturer’s recharging instructions.

5. Study all battery manufacturer’s specific precautions

while charging and recommended rates of charge.

6. Charge battery initially at lowest rate.

7. A marine (boat) battery must be removed and

charged on shore. To charge it on board requires

equipment specially designed for marine use.

?BR;A6X%W@AA6;C6?%K%will read on

Charge Meter as a high end peg at beginning of

charging process. If after 5-10 minutes, needle

does not move off high end, the battery probably has

a short circuit. Unplug charger and discontinue use.

Have battery checked by a qualified technician.

TRGX%W@AA6;C6?%K begin charging at a low rate,

increase as battery reaches a normal temperature,

then rate will decrease normally.

XR%ERA%TB@;V6%@%<;Rh6E%W@AA6;Q1

W@AA6;C6?%UCAB%BQX;RD6A6;%6Q6-

Do not depend on hydrometer eye to

determine battery charge level.

T.,(3*(%G&4,$"&8

1. Locate charger as far away from

battery as DC cables permit.

2. Never place charger directly above

battery being charged; gases from battery

will corrode and damage charger.

3. Never allow battery acid to drip on charger when

reading electrolyte specific gravity or filling battery.

4. Do not operate charger in a closed-in

area or restrict ventilation in any way.

5. Do not set a battery on top of charger.

Page 8 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 60581

?@<6AQ RS6;@ACRE D@CEA6E@ET6?S6TC<CT@ACRE?

T.,(3"83%W,$$*(>%C8#$,77*9%"8%!*."47*

@%?S@;i%E6@;%W@AA6;Q%D@Q%T@F?6%W@AA6;Q%6dSGR?CRE1%%

AR%;6XFT6%;C?i%R<%@%?S@;i%E6@;%W@AA6;Q%<RGGRU%AB6?6%CE?A;FTACRE?%6d@TAGQ1

AR%S;6!6EA%?6;CRF?%CEbF;Q-%

U*,(%@E?CK,//(&_*9%#/7,#.K(*#"#$,8$%#,2*$>%3&337*#%,89%.*,_>K9'$>%('++*(%)&(a%37&_*#%

).*8*_*(%4&88*4$"83I%9"#4&88*4$"83I%&(%)&(a"83%8*,(%+,$$*(>1%%%

W,$$*(>%,4"9%4,8%4,'#*%/*(5,8*8$%+7"898*##1

U@;ECEVc X&%8&$%'#*%?$,($%#*$$"83%$&%

4.,(3*%+,$$*("*#1%%F#*%$&%='5/%#$,($%&87>1

1. Position AC and DC cables to reduce risk of

damage by hood, door, or moving engine part.

2. Stay clear of fan blades, belts, pulleys, and

other parts that can cause injury to persons.

3. Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has larger

diameter than NEGATIVE (NEG, N,–) post.

4. Determine which post of battery is grounded

(connected) to the chassis. If negative post is

grounded to chassis (as in most vehicles), see 5.

If positive post is grounded to the chassis, see 6.

5. For negative-grounded vehicle, connect

POSITIVE (RED) clip from battery charger to

POSITIVE (POS, P, +) ungrounded post of battery.

Connect NEGATIVE (BLACK) clip to vehicle

chassis or engine block away from battery.

Do not connect clip to carburetor, fuel lines, or

sheet-metal body parts. Connect to a heavy

gauge metal part of the frame or engine block.

ERACT6-%%C2%$.*%;*_*(#*%T&88*4$"&8%"89"4,$&(%7"3.$#I%

$.*%4,+7*#%,(*%4&88*4$*9%"5/(&/*(7>1%%

C55*9",$*7>%9"#4&88*4$%$.*%4,+7*#%,89%4&88*4$%

$.*5%/(&/*(7>%$&%/(*_*8$%9,5,3*%$&%$.*%+,$$*(>1

6. For positive-grounded vehicle, connect

NEGATIVE (BLACK) clip from battery charger

to NEGATIVE (NEG, N, –) ungrounded post of

battery. Connect POSITIVE (RED) clip to vehicle

chassis or engine block away from battery.

Do not connect clip to carburetor, fuel lines, or

sheet-metal body parts. Connect to a heavy

gauge metal part of the frame or engine block.

E&$*- If the charger cycles between maximum charge

level and a lower charge level when first connected,

then the battery may be fully charged or nearly fully

charged. Further charging may not be needed.

If charging is attempted, charge at a lower rate and

carefully monitor charge level to avoid battery damage.

7. Set Battery Type switch according to battery type:

• Set to Regular for flooded and

maintenance-free batteries.

• Set to AGM for Absorbed Glass Mat batteries.

U@;ECEVc%%AR%S;6!6EA%6dSGR?CRE-%

XR%ERA%F?6%UCAB%V6G%W@AA6;C6?1

8. Set Setting switch to 2A Trickle Charge

or 10A Quick Charge.

U@;ECEVc X&%8&$%'#*%N]@%65*(3*84>%683"8*%?$,($%

2'84$"&8%2&(%4.,(3"831

9. After switches are set, plug in charger.

10. Monitor the charging process.

The Charge Complete indicator will light up

and blink when the battery is fully charged.

11. When disconnecting charger, disconnect AC cord,

remove clip from vehicle chassis, and then

remove clip from battery terminal.

12. After use clean, then store the charger

indoors out of children’s reach.

Page 9<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 60581

?@<6AQRS6;@ACRED@CEA6E@ET6 ?S6TC<CT@ACRE?

T.,(3"83%W,$$*(>%R'$#"9*%!*."47*

@%?S@;i%E6@;%W@AA6;Q%D@Q%T@F?6%W@AA6;Q%6dSGR?CRE1%%

AR%;6XFT6%;C?i%R<%@%?S@;i%E6@;%W@AA6;Q%<RGGRU%AB6?6%CE?A;FTACRE?%6d@TAGQ1

AR%S;6!6EA%?6;CRF?%CEbF;Q-%

U*,(%@E?CK,//(&_*9%#/7,#.K(*#"#$,8$%#,2*$>%3&337*#%,89%.*,_>K9'$>%('++*(%)&(a%37&_*#%

).*8*_*(%4&88*4$"83I%9"#4&88*4$"83I%&(%)&(a"83%8*,(%+,$$*(>1%%%

W,$$*(>%,4"9%4,8%4,'#*%/*(5,8*8$%+7"898*##1

U@;ECEVc X&%8&$%'#*%?$,($%#*$$"83%$&%

4.,(3*%+,$$*("*#1%%F#*%$&%='5/%#$,($%&87>1

1. Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has a larger

diameter than NEGATIVE (NEG, N, –) post.

2. Attach at least a 24-inch-long 6-gauge

(AWG) insulated battery cable to

NEGATIVE (NEG, N, –) battery post.

3. Connect POSITIVE (RED) charger clip to

POSITIVE (POS, P, +) post of battery.

4. Position yourself and free end of cable as far away

from battery as possible – then connect NEGATIVE

(BLACK) charger clip to free end of cable.

5. Do not face battery when making final connection.

ERACT6-%%C2%$.*%;*_*(#*%T&88*4$"&8%"89"4,$&(%7"3.$#I%

$.*%4,+7*#%,(*%4&88*4$*9%"5/(&/*(7>1%%

C55*9",$*7>%9"#4&88*4$%$.*%4,+7*#%,89%4&88*4$%

$.*5%/(&/*(7>%$&%/(*_*8$%9,5,3*%$&%$.*%+,$$*(>1

6. Set Battery Type switch according to battery type:

• Set to Regular for flooded and

maintenance-free batteries.

• Set to AGM for Absorbed Glass Mat batteries.

U@;ECEVc%%AR%S;6!6EA%6dSGR?CRE-%

XR%ERA%F?6%UCAB%V6G%W@AA6;C6?1

7. Set Setting switch to 2A Trickle Charge

or 10A Quick Charge.

U@;ECEVc X&%8&$%'#*%N]@%65*(3*84>%683"8*%?$,($%

2'84$"&8%2&(%4.,(3"831

8. After switches are set, plug in charger.

9. Monitor the charging process.

The Charge Complete indicator will light up

and blink when the battery is fully charged.

10. When disconnecting charger, always do

so in reverse sequence of connecting

procedure and break first connection while

as far away from battery as practical.

11. After use clean, then store the charger

indoors out of children’s reach.

Page 10 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 60581

?@<6AQ RS6;@ACRE D@CEA6E@ET6?S6TC<CT@ACRE?

J\!%683"8*%?$,($"83

?&5*%_*."47*#%)"$.%&8+&,(9%4&5/'$*(#%5,>%+*%9,5,3*9%2(&5%$.*%."3.K4'((*8$%#$,($"83%&'$/'$1%%%

A.&(&'3.7>%(*,9%$.*%_*."47*%#*(_"4*%5,8',7%+*2&(*%'#"83%$."#%/(&4*9'(*1

U@;ECEVc X&%8&$%'#*%?$,($%#*$$"83%$&%

4.,(3*%+,$$*("*#1%%F#*%$&%='5/%#$,($%&87>1

E&$*-%During extremely cold weather or when battery

is severely exhausted, charge the battery for about

five minutes before attempting to turn on engine.

1. Unplug the Charger AC power

cord from the AC outlet.

2. For negative-grounded vehicle, connect

POSITIVE (RED) clip from battery charger to

POSITIVE (POS, P, +) ungrounded post of battery.

Connect NEGATIVE (BLACK) clip to vehicle

chassis or engine block away from battery.

Do not connect clip to carburetor, fuel lines, or

sheet-metal body parts. Connect to a heavy gauge

metal part of the frame or engine block.

ERACT6-%%C2%$.*%;*_*(#*%T&88*4$"&8%"89"4,$&(%7"3.$#I%

$.*%4,+7*#%,(*%4&88*4$*9%"5/(&/*(7>1%%

C55*9",$*7>%9"#4&88*4$%$.*%4,+7*#%,89%4&88*4$%

$.*5%/(&/*(7>%$&%/(*_*8$%9,5,3*%$&%$.*%+,$$*(>1

3. Position AC and DC cables to reduce risk of

damage by hood, door, or moving engine part.

4. Set Battery Type switch according to battery type:

• Set to Regular for flooded and

maintenance-free batteries.

• Set to AGM for Absorbed Glass Mat batteries.

U@;ECEVc%%AR%S;6!6EA%6dSGR?CRE-%

XR%ERA%F?6%UCAB%V6G%W@AA6;C6?1

5. Set Setting switch to 50A Emergency Engine Start.

6. After switches are set, plug in charger.

7. U@;ECEVc%%AR%S;6!6EA%?6;CRF?%

CEbF;QI%<C;6I%@EX%X@D@V6%AR%

TB@;V6;%@EX%W@AA6;QI%2&77&)%N%#*4&89%

5,Z"5'5%)"$.%j%5"8'$*%5"8"5'5%(*#$%

9'$>%4>47*%2&(%$.*%?$,($%5&9*1

8. To start the engine, turn ignition key.%%

REGQ%i66S%TB@;V6;%CE%?A@;A%DRX6%

FS%AR%N%?6TREX?%@A%@%ACD61

9. If engine fails to start, charge battery for an

additional five minutes before attempting to start.

10. After the engine starts, unplug the power cord from

outlet before disconnecting the DC cable clamps.

Page 11<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 60581

?@<6AQRS6;@ACRED@CEA6E@ET6 ?S6TC<CT@ACRE?

;*4&(9%S(&9'4$k#%?*(",7%E'5+*(%B*(*-%

E&$*- If product has no serial number, record month and year of purchase instead.

E&$*- Internal parts are not user-serviceable. Replacement parts are not available.

D,"8$*8,84*%C8#$('4$"&8#

%S(&4*9'(*#%8&$%#/*4"2"4,77>%*Z/7,"8*9%"8%$."#%5,8',7%5'#$%

+*%/*(2&(5*9%&87>%+>%,%H',7"2"*9%$*4.8"4",81

AR%S;6!6EA%?6;CRF?%CEbF;Q-%%F8/7'3%$.*%4.,(3*(I%9"#4&88*4$%,8>%+,$$*(>I%,89%,77&)%4.,(3*(%

$&%4&&7%4&5/7*$*7>%+*2&(*%/*(2&(5"83%,8>%"8#/*4$"&8I%5,"8$*8,84*I%&(%47*,8"83%/(&4*9'(*#1

AR%S;6!6EA%?6;CRF?%CEbF;Q%<;RD%TB@;V6;%<@CGF;6-%

X&%8&$%'#*%9,5,3*9%*H'"/5*8$1%%C2%,+8&(5,7%8&"#*%&(%_"+(,$"&8%&44'(#I%

.,_*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1

1. W6<R;6%6@TB%F?6I inspect the general

condition of the charger. Check for:

• loose hardware,

• cracked or broken parts,

• damaged electrical wiring or cable insulation, and

• any other condition that may

affect its safe operation.

2. @<A6;%F?6I wipe external surfaces

of the charger with clean cloth.

3. U@;ECEVc%%C2%$.*%#'//7>%4&(9%&2%$."#%

4.,(3*(%"#%9,5,3*9I%"$%5'#$%+*%(*/7,4*9%

&87>%+>%,%H',7"2"*9%#*(_"4*%$*4.8"4",81%%

XR%ERA%RS6E%TB@;V6;%BRF?CEVI%

ER%F?6;K?6;!CT6@WG6%S@;A?%CE?CX61

A(&'+7*#.&&$"83

S(&+7*5 S&##"+7*%T,'#*# G"a*7>%?&7'$"&8#

Charger will not start. 1. Cord not connected.

2. No power at outlet.

3. Clamps are not securely

connected to battery terminals.

1. Check that cord is plugged in.

2. Check power at outlet.

If outlet is unpowered, turn off charger and

check circuit breaker.

If breaker is tripped,

make sure circuit is right capacity for

charger and circuit has no other loads.

3. Unplug charger and check that the clamps are

securely connected to the battery terminals.

Red Reverse Connection

LED turns on.

Clamps are attached to

wrong battery terminals.

Unplug charger if it is plugged in

and reverse the connections.

Charge Meter stays at

high end of dial for more

than 5-10 minutes.

Battery has a short circuit. Unplug the charger and discontinue use.

Have the battery checked by a qualified technician.

Charger will not

start vehicle.

Setting switch is set to Charge. Change the Setting switch to Start.

<&77&)%,77%#,2*$>%/(*4,'$"&8#%).*8*_*(%9",38&#"83%&(%#*(_"4"83%$.*%4.,(3*(1%%%

X"#4&88*4$%/&)*(%#'//7>%+*2&(*%#*(_"4*1

ljPJ%D"##"&8%R,a#%W7_91%%m%%SR%W&Z%M]]P%%m%%T,5,("77&I%T@%Pl]JJ%%m%%JKLLLKLMMKNOPO

G"5"$*9%P]%X,>%U,((,8$>

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

ljPJ%D"##"&8%R,a#%W7_91%%m%%SR%W&Z%M]]P%%m%%T,5,("77&I%T@%Pl]JJ%%m%%JKLLLKLMMKNOPO

V,(,8$n,%7"5"$,9,%9*%P]%9n,#

Harbor Freight Tools Co. hace todo lo posible para asegurar que sus productos cumplen con altos estándares de

calidad y durabilidad, y garantiza al comprador original que este producto está libre de defectos en sus materiales

y mano de obra durante un plazo de 90 días a partir de la fecha de compra. Esta garantía no corresponde a los daños

resultantes, directa o indirectamente, del mal uso, abuso, negligencia o accidentes, reparaciones o alteraciones

fuera de nuestras instalaciones, actividad delictiva, instalación incorrecta, desgaste normal o falta de mantenimiento.

En ningún caso seremos responsables por muerte, lesiones a personas o bienes, o en el caso de daños incidentales,

contingentes, especiales o consecuentes derivados del uso de nuestro producto. Algunos estados no permiten

la exclusión o limitación de daños incidentales o consecuentes, por lo cual es posible que la anterior limitación

de exclusión no sea aplicable a usted. ESTA GARANTÍA SUSTITUYE EXPRESAMENTE TODAS LAS DEMÁS

GARANTÍAS, EXPRESAS O IMPLÍCITAS, INCLUIDAS LAS GARANTÍAS DE COMERCIABILIDAD Y ADECUACIÓN.

Para obtener los beneficios de esta garantía, deberá remitirnos el producto o pieza con los gastos de transporte

prepagados. Junto con el artículo, deberá remitir, además, el comprobante de la fecha de compra y una explicación

de su reclamo. Si nuestra inspección verifica el defecto, repararemos o sustituiremos el producto, a nuestra elección,

o podemos optar por reintegrar el precio de compra si no podemos fácil y rápidamente proporcionarle un reemplazo.

Los gastos de envío de los productos reparados correrán por nuestra cuenta, pero si determinamos que no existe

ningún defecto, o que el defecto fue resultado de circunstancias que no se encuentran dentro del alcance de nuestra

garantía, usted deberá hacerse cargo de los costos de envío del producto.

Esta garantía le otorga derechos legales específicos y también puede tener otros derechos que varían entre estados.

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X<FETCRE@DC6EARD@EA6ECDC6EAR TRE<CVF;@TCpE

@8&$*%*7%8q5*(&%9*%#*("*%9*7%/(&9'4$&%,H'n-%%

E&$,- Si el producto no posee número de serie, tome nota del mes y el año de la compra.

E&$,- El usuario no puede reparar ni reemplazar las piezas internas. Las piezas de repuesto no están disponibles.

D,8$*8"5"*8$&

% F8%$o48"4&%4,7"2"4,9&%9*+*%(*,7"Y,(%7&#%/(&4*9"5"*8$&#%H'*%8&%

#*%*Z/7"H'*8%*#/*4n2"4,5*8$*%*8%*#$*%5,8',71

@X!6;A6ETC@

S@;@%6!CA@;%G6?CRE6?%V;@!6?-%X*#*84.'2*%*7%4,(3,9&(I%9*#4&8*4$*%4',7H'"*(%

+,$*(n,%>%/*(5"$,%H'*%*7%4,(3,9&(%#*%*82(n*%/&(%4&5/7*$&%,8$*#%9*%(*,7"Y,(%4',7H'"*(%

"8#/*44"r8I%$,(*,%9*%5,8$*8"5"*8$&%&%/(&4*9"5"*8$&%9*%7"5/"*Y,1

S@;@%6!CA@;%G6?CRE6?%V;@!6?%RT@?CRE@X@?%SR;%FE%<FETCRE@DC6EAR%X6<6TAFR?R%X6G%

T@;V@XR;-%

E&%'$"7"4*%*7%*H'"/&%#"%*#$s%9,t,9&1%?"%9*$*4$,%('"9&#%*Z$(,t&#%&%_"+(,4"r8I%.,3,%4&((*3"(%%

*7%/(&+7*5,%,8$*#%9*%4&8$"8',(%4&8%*7%'#&1

1. @EA6?%X6%T@X@%F?RI inspeccione el estado

general del cargador. Verifique que no haya:

• componentes sueltos,

• piezas rajadas o rotas,

• cables eléctricos o aislantes de cables dañados, o

• cualquier otra condición que pueda afectar

el funcionamiento seguro de la unidad.

2. X6?SFu?%X6%FACGCh@;I limpie las superficies

externas del cargador con un paño limpio.

3. v@X!6;A6ETC@c%?"%*7%4,+7*%9*%,7"5*8$,4"r8%

9*%*#$*%4,(3,9&(%*#$s%9,t,9&I%q8"4,5*8$*%'8%

$o48"4&%4,7"2"4,9&%9*+*%(**5/7,Y,(7&1%

ER%@W;@%G@%T@;T@?@%X6G%T@;V@XR;^%

6E%?F%CEA6;CR;%ER%B@Q%SC6h@?%wF6%

SF6X@%;6S@;@;%6G%F?F@;CR1

;*#&7'4"r8%9*%/(&+7*5,#

S(&+7*5, T,'#,#%/&#"+7*# ?&7'4"&8*#%/(&+,+7*#

El cargador no arranca. 1. El cable no está conectado.

2. No hay energía en el tomacorriente.

3. Las pinzas no están conectadas de

manera firme a los bornes de la batería.

1. Verifique que el cable esté enchufado.

2. Verifique si hay energía en el tomacorriente.

Si no hay energía en el tomacorriente,

apague el cargador y verifique el disyuntor.

Si el disyuntor se disparó, asegúrese de que

el circuito tenga la capacidad correcta para

el cargador y que no tenga otras cargas.

3. Desenchufe el cargador y verifique que

las pinzas estén firmemente conectadas

a las terminales de la batería.

La luz LED roja de

"Invertir conexión"

se enciende.

Las pinzas están conectadas a las

terminales incorrectas de la batería.

Desenchufe el cargador si está

enchufado, e invierta las conexiones.

El Charge Meter se

mantiene en el lado del

dial correspondiente

a las cargas altas por

más de 5-10 minutos.

La batería tiene un cortocircuito. Desenchufe el cargador y discontinúe

el uso. Haga que un técnico

calificado revise la batería.

El cargador no hace

arrancar el vehículo.

El Setting Switch (Interruptor de

configuración) está colocado

en Charge (Carga).

Cambie el Setting Switch (Interruptor de

configuración)

a Start (Arranque).

?"3,%$&9,#%7,#%/(*4,'4"&8*#%9*%#*3'("9,9%4,9,%_*Y%H'*%(*,7"4*%$,(*,#%9*%9",38r#$"4&%&%

(*/,(,4"r8%,7%4,(3,9&(1%%

X*#4&8*4$*%*7%#'5"8"#$(&%9*%*8*(3n,%*7o4$("4,%,8$*#%9*%(*,7"Y,(%*7%#*(_"4"&%9*%5,8$*8"5"*8$&1

Página 11

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X <FETCRE@DC6EAR D@EA6ECDC6EARTRE<CVF;@TCpE

Tr5&%.,4*(%,((,84,(%'8%5&$&(%9*%J\%_&7$"&#

AVISO

@73'8&#%_*.n4'7&#%H'*%/&#**8%4&5/'$,9&(,#%"8$*3(,9,#%/'*9*8%(*#'7$,(%9,t,9&#%/&(%7,#%,7$,#%4&(("*8$*#%

9*%#,7"9,%9'(,8$*%*7%,((,8H'*1%%

G*,%9*$,77,9,5*8$*%*7%5,8',7%9*%#*(_"4"&%9*7%_*.n4'7&%,8$*#%9*%'$"7"Y,(%*#$*%/(&4*9"5"*8$&1

E&$,- En condiciones de clima extremadamente

frío o cuando la batería esté muy agotada,

cargue la batería durante unos cinco minutos

antes de intentar encender el motor.

1. Desenchufe el cable de CA del cargador

del tomacorriente de CA.

2. En el caso de un vehículo que tenga el borne

negativo conectado a tierra, conecte la pinza

POSITIVA (ROJA) del cargador de baterías al borne

POSITIVO (POS, P, +) no conectado a tierra de

la batería. Conecte la pinza NEGATIVA (NEGRA)

al chasis o al bloque del motor del vehículo, lejos

de la batería. No conecte la pinza al carburador,

a tuberías de combustible o a piezas de chapa de

la carrocería. Conecte a una pieza de metal de

alto calibre del bastidor o del bloque del motor.

@!C?R-%?"%#*%*84"*89*%*7%"89"4,9&(%9*%xC8_*($"(%

4&8*Z"r8xI%7&#%4,+7*#%*#$s8%4&8*4$,9&#%9*%

5,8*(,%"84&((*4$,1%X*#4&8*4$*%7&#%4,+7*#%

9*%"85*9",$&%>%4&8o4$*7&#%4&((*4$,5*8$*%

/,(,%"5/*9"(%H'*%7,%+,$*(n,%#'2(,%9,t&#1

3. Coloque los cables de CA y CC de modo tal

de reducir el riesgo de daños causados por el

capó, la puerta o alguna pieza móvil del motor.

4. Configure el Interruptor de tipo de batería

de acuerdo al tipo de batería:

• Colóquelo en Regular para baterías líquidas

y baterías libres de mantenimiento.

• Colóquelo en AGM para baterías de

separador de fibra de vidrio absorbente.

v@X!6;A6ETC@c%S@;@%6!CA@;%6dSGR?CRE6?-%

ER%FACGCT6%TRE%W@A6;y@?%X6%V6G1

5. Coloque el Setting Switch (Interruptor de

configuración) en Emergency Engine Start

(Arranque de emergencia del motor) de 50A .

6. Una vez configurados los interruptores,

enchufe el cargador.

7. v@X!6;A6ETC@c%S@;@%6!CA@;%G6?CRE6?%

V;@!6?I%CET6EXCR%Q%X@zR?%@G%T@;V@XR;%

Q%G@%W@A6;y@I%#"3,%'8%4"47&%9*%$(,+,=&%9*%

N%#*3'89&#%5sZ"5&%4&8%j%5"8'$&#%9*%9*#4,8#&%

5n8"5&%/,(,%*7%5&9&%?$,($%e@((,8H'*f1

8. Para encender el motor, gire la llave de

encendido.%D@EA6EV@%6G%T@;V@XR;%

6E%DRXR%?A@;A%e@;;@EwF6f%?RGR%

B@?A@%N%?6VFEXR? SR;%!6h1

9. Si el motor no arranca, cargue la batería otros

cinco minutos antes de intentar hacerlo arrancar.

10. Cuando el motor haya arrancado, desenchufe el

cable del tomacorriente antes de desconectar las

pinzas del cable de CC.

Página 10

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X<FETCRE@DC6EARD@EA6ECDC6EAR TRE<CVF;@TCpE

Tr5&%4,(3,(%'8,%+,$*(n,%2'*(,%9*7%_*.n4'7&

@X!6;A6ETC@

FE@%TBC?S@%T6;T@%X6%G@%W@A6;y@%SRX;y@%B@T6;%wF6%6?A@%6dSGRA61%%

S@;@%;6XFTC;%6G%;C6?VR%X6%wF6%?6%V6E6;6E%TBC?S@?%T6;T@%X6%G@%W@A6;y@I%?CV@%6?A@?%

CE?A;FTTCRE6?%@G%SC6%X6%G@%G6A;@-

S@;@%6!CA@;%G6?CRE6?%V;@!6?-%

F$"7"4*%3,2,#%9*%#*3'("9,9%,%/('*+,%9*%#,7/"4,9'(,#%>%3',8$*#%9*%$(,+,=&%9*%4,'4.&%9*%,7$,%

(*#"#$*84",%,/(&+,9&#%/&(%*7%@E?C%4,9,%_*Y%H'*%4&8*4$*I%9*#4&8*4$*%&%$(,+,=*%4*(4,%9*%7,%+,$*(n,1%%

67%s4"9&%9*%7,%+,$*(n,%/'*9*%4,'#,(%4*3'*(,%/*(5,8*8$*1

1. Verifique la polaridad de los bornes de la

batería. El borne POSITIVO (POS, P, +) de la

batería generalmente tiene un diámetro mayor

que el del borne NEGATIVO (NEG, N, –).

2. Conecte un cable de batería con aislante

que tenga al menos 24 pulgadas de

longitud y calibre americano 6 al borne

NEGATIVO (NEG, N, –) de la batería.

3. Conecte la pinza POSITIVA (ROJA) del cargador

al borne POSITIVO (POS, P, +) de la batería.

4. Colóquese usted y coloque el extremo libre del

cable tan lejos como sea posible de la batería;

luego, conecte la pinza NEGATIVA (NEGRA)

del cargador al extremo libre del cable.

5. No se ponga de frente a la batería

cuando realice la conexión final.

@!C?R-%?"%#*%*84"*89*%*7%"89"4,9&(%9*%

xC8_*($"(%4&8*Z"r8xI%7&#%4,+7*#%*#$s8%4&8*4$,9&#%

9*%5,8*(,%"84&((*4$,1%X*#4&8*4$*%7&#%4,+7*#%

9*%"85*9",$&%>%4&8o4$*7&#%4&((*4$,5*8$*%

/,(,%"5/*9"(%H'*%7,%+,$*(n,%#'2(,%9,t&#1

6. Configure el interruptor de tipo de batería

de acuerdo al tipo de batería:

• Colóquelo en Regular para baterías líquidas

y baterías libres de mantenimiento.

• Colóquelo en AGM para baterías de

separador de fibra de vidrio absorbente.

v@X!6;A6ETC@c%S@;@%6!CA@;%6dSGR?CRE6?-%

ER%FACGCT6%TRE%W@A6;y@?%X6%V6G1

7. Configure el Setting Switch (Interruptor de

configuración) en el amperaje de carga deseado.

8. Una vez configurados los interruptores,

enchufe el cargador.

9. Monitoree el proceso de carga. El indicador de

"Carga completa" se encenderá y parpadeará

cuando la batería esté totalmente cargada.

10. Al desconectar el cargador, hágalo siempre

en secuencia inversa a la secuencia seguida

para el procedimiento de conexión e interrumpa

primero la conexión mientras se encuentre tan

alejado de la batería como resulte práctico.

11. Después de utilizar el cargador, límpielo y guárdelo

bajo techo, fuera del alcance de los niños.

Página 9

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X <FETCRE@DC6EAR D@EA6ECDC6EARTRE<CVF;@TCpE

Tr5&%4,(3,(%'8,%+,$*(n,%"8#$,7,9,%*8%'8%_*.n4'7&

@X!6;A6ETC@

FE@%TBC?S@%T6;T@%X6%G@%W@A6;y@%SRX;y@%B@T6;%wF6%6?A@%6dSGRA61%%

S@;@%;6XFTC;%6G%;C6?VR%X6%wF6%?6%V6E6;6E%TBC?S@?%T6;T@%X6%G@%W@A6;y@I%?CV@%6?A@?%

CE?A;FTTCRE6?%@G%SC6%X6%G@%G6A;@-

S@;@%6!CA@;%G6?CRE6?%V;@!6?-%

F$"7"4*%3,2,#%9*%#*3'("9,9%,%/('*+,%9*%#,7/"4,9'(,#%>%3',8$*#%9*%$(,+,=&%9*%4,'4.&%9*%,7$,%

(*#"#$*84",%,/(&+,9&#%/&(%*7%@E?C%4,9,%_*Y%H'*%4&8*4$*I%9*#4&8*4$*%&%$(,+,=*%4*(4,%9*%7,%+,$*(n,1%%

67%s4"9&%9*%7,%+,$*(n,%/'*9*%4,'#,(%4*3'*(,%/*(5,8*8$*1

1. Coloque los cables de CA y CC de modo tal

de reducir el riesgo de daños causados por el

capó, la puerta o alguna pieza móvil del motor.

2. Manténgase alejado de aspas de ventilador,

correas, poleas y otras piezas que puedan

causar lesiones a las personas.

3. Verifique la polaridad de los bornes de la

batería. El borne POSITIVO (POS, P, +) de la

batería generalmente tiene un diámetro mayor

que el del borne NEGATIVO (NEG, N,–).

4. Determine qué borne de la batería posee conexión

a tierra (está conectado) al chasis. Si el borne

negativo está conectado al chasis (como sucede

en la mayoría de los vehículos), vea 5. Si el

borne positivo está conectado al chasis, vea 6.

5. En el caso de un vehículo que tenga el borne

negativo conectado a tierra, conecte la pinza

POSITIVA (ROJA) del cargador de baterías al borne

POSITIVO (POS, P, +) no conectado a tierra de

la batería. Conecte la pinza NEGATIVA (NEGRA)

al chasis o al bloque del motor del vehículo, lejos

de la batería. No conecte la pinza al carburador,

a tuberías de combustible o a piezas de chapa de

la carrocería. Conecte a una pieza de metal de

alto calibre del bastidor o del bloque del motor.

@!C?R-%?"%#*%*84"*89*%*7%"89"4,9&(%9*%xC8_*($"(%

4&8*Z"r8xI%7&#%4,+7*#%*#$s8%4&8*4$,9&#%9*%

5,8*(,%"84&((*4$,1%X*#4&8*4$*%7&#%4,+7*#%

9*%"85*9",$&%>%4&8o4$*7&#%4&((*4$,5*8$*%

/,(,%"5/*9"(%H'*%7,%+,$*(n,%#'2(,%9,t&#1

6. En el caso de un vehículo que tenga el borne

positivo conectado a tierra, conecte la pinza

NEGATIVA (NEGRA) del cargador de baterías al

borne NEGATIVO (NEG, N, –) no conectado a tierra

de la batería. Conecte la pinza POSITIVA (ROJA)

al chasis o al bloque del motor del vehículo, lejos

de la batería. No conecte la pinza al carburador,

a tuberías de combustible o a piezas de chapa de

la carrocería. Conecte a una pieza de metal de

alto calibre del bastidor o del bloque del motor.

Note: If the charger cycles between maximum charge

level and a lower charge level when first connected,

then the battery may be fully charged or nearly fully

charged. Further charging may not be needed.

If charging is attempted, charge at a lower rate and

carefully monitor charge level to avoid battery damage.

7. Configure el interruptor de tipo de batería

de acuerdo al tipo de batería:

• Colóquelo en Regular para baterías líquidas

y baterías libres de mantenimiento.

• Colóquelo en AGM para baterías de

separador de fibra de vidrio absorbente.

v@X!6;A6ETC@c%S@;@%6!CA@;%6dSGR?CRE6?-%

ER%FACGCT6%TRE%W@A6;y@?%X6%V6G1

8. Configure el Setting Switch (Interruptor de

configuración) en el amperaje de carga deseado.

9. Una vez configurados los interruptores,

enchufe el cargador.

10. Monitoree el proceso de carga. El indicador de

"Carga completa" se encenderá y parpadeará

cuando la batería esté totalmente cargada.

11. Al desconectar el cargador, desconecte el cable

de CA, quite la pinza del chasis del vehículo y

luego retire la pinza de la terminal de la batería.

12. Después de utilizar el cargador, límpielo y guárdelo

bajo techo, fuera del alcance de los niños.

Página 8

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X<FETCRE@DC6EARD@EA6ECDC6EAR TRE<CVF;@TCpE

Sometimes conditions such as a cold battery,

a sulfated battery, or a deeply discharged lead calcium

battery may cause Charge Meter to read near

a full charge when charging process is only beginning.

Note: The Charge Meter shows the amount of

current being drawn from the charger. It does not

show what the charger is capable of delivering.

When the battery is fully charged and registering 100%

on the Charge Meter, a small charge will continue to

move from the charger to the battery. If the charger

is not disconnected from the battery, eventually

heat build up will cause the battery acid to boil and

overcharge the battery causing damage to the battery.

Monitor battery charging progress constantly and

if battery gets warm, stop charging it immediately.

Battery Type switch%eC8$*(('/$&(%9*%$"/&%9*%+,$*(n,f-

Utilícelo para configurar el tipo de batería:

• Colóquelo en Regular para baterías líquidas y baterías

libres de mantenimiento.

• Colóquelo en AGM para baterías de

separador de fibra de vidrio absorbente.

v@X!6;A6ETC@c%S@;@%6!CA@;%6dSGR?CRE6?-%

ER%FACGCT6%TRE%W@A6;y@?%X6%V6G1

S(*/,(,$"_&#%/,(,%7,%4,(3,

@X!6;A6ETC@

F$"7"4*%*#$*%4,(3,9&(%q8"4,5*8$*%4&8%+,$*(n,#%9*%/7&5&Ks4"9&%7nH'"9&1%%

R$(,#%+,$*(n,#%/'*9*8%*#$,(%9,t,9,#%&%/'*9*8%#&+(*4,7*8$,(#*I%3&$*,(%&%"84*89",(#*1

S@;@%6!CA@;%G6?CRE6?%V;@!6?-%

F$"7"4*%3,2,#%9*%#*3'("9,9%,%/('*+,%9*%#,7/"4,9'(,#%>%3',8$*#%9*%$(,+,=&%9*%4,'4.&%9*%,7$,%

(*#"#$*84",%,/(&+,9&#%/&(%*7%@E?C%4,9,%_*Y%H'*%4&8*4$*I%9*#4&8*4$*%&%$(,+,=*%4*(4,%9*%7,%+,$*(n,1%%

67%s4"9&%9*%7,%+,$*(n,%/'*9*%4,'#,(%4*3'*(,%/*(5,8*8$*1

1. De ser necesario extraer la batería del vehículo

para cargarla, siempre quite primero de la batería

el terminal con conexión a tierra. Asegúrese

de que todos los accesorios del vehículo estén

apagados, para no generar un arco voltaico.

2. Asegúrese de que el área que rodea a la batería

esté bien ventilada mientras carga la batería.

3. Limpie las terminales de la batería. Sea cuidadoso y

evite que la corrosión entre en contacto con los ojos.

4. Agregue agua destilada en cada celda hasta que el

ácido de la batería llegue al nivel especificado por el

fabricante de la batería. No supere el límite máximo.

En el caso de las baterías cuyas celdas no poseen

tapones extraíbles, como las baterías de plomo-

ácido reguladas por válvula, siga cuidadosamente

las instrucciones del fabricante para la recarga.

5. Analice todas las precauciones específicas indicadas

por el fabricante de la batería relativas al proceso de

carga, y no supere las tasas de carga recomendadas.

6. Inicialmente, cargue la batería a la tasa más baja

de carga.

7. Las baterías náuticas (embarcaciones)

deben extraerse y cargarse en tierra firme.

Para cargarlas a bordo, hacen falta equipos

especialmente diseñados para usos náuticos.

W@A6;y@?%6E%TR;ARTC;TFCAR%K el Charge Meter las

indicará con una estaquilla en el lado correspondiente

a las altas cargas al comienzo del proceso de

carga. Si después de 5-10 minutos la aguja no se

aleja del lado correspondiente a las altas cargas,

probablemente la batería esté en cortocircuito.

Desenchufe el cargador y discontinúe el uso. Haga

que un técnico calificado revise la batería.

W@A6;y@?%<;y@?%K comienzan a cargarse a una tasa

baja, la tasa aumenta a medida que la batería llega

a una temperatura normal, y luego la tasa se reduce

normalmente. ER%T@;VF6%W@A6;y@?%B6G@X@?1

W@A6;y@?%TRE%RbR%BCX;RDuA;CTR-

No dependa del ojo hidrométrico para

determinar el nivel de carga de la batería.

F+"4,4"r8%9*7%4,(3,9&(

1. Coloque el cargador tan lejos de la batería

como los cables de CC lo permitan.

2. Nunca coloque el cargador directamente

encima de la batería que está siendo

cargada; de lo contrario, los gases de la

batería corroerán y dañarán el cargador.

3. Nunca permita que el ácido de la batería gotee

sobre el cargador mientras realiza la lectura de la

gravedad específica del electrolito o llena la batería.

4. No opere el cargador en áreas cerradas

ni restrinja la ventilación.

5. No coloque la batería encima del cargador.

Página 7

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X <FETCRE@DC6EAR D@EA6ECDC6EARTRE<CVF;@TCpE

6#/*4"2"4,4"&8*#

Entrada 120VAC, 60Hz, 2,2A

Salida

12 VCC - 10* A

12 VCC - 2* A

12 VCC Arranque de motor

- 50 A

[67%,5/*(,=*%q8"4,5*8$*%*#$s%/(*#*8$*%4',89&%7,%

'8"9,9%*#$s%4&8*4$,9,%,%'8,%+,$*(n,%&%*8%5&9&%?A@;A%

e@;;@EwF6f1

<'84"&8,5"*8$&%C8#$('44"&8*#

@8$*#%9*%"8#$,7,(%&%'#,(%*#$*%/(&9'4$&I%7*,%7,%ARA@GCX@X X6%G@%?6TTCpE%xCE<R;D@TCpE%CDSR;A@EA6%?RW;6%

?6VF;CX@X" H'*%#*%*84'*8$(,%,7%4&5"*8Y&%9*%*#$*%5,8',7I%"847'>*89&%$&9&#%7&#%$*Z$&#%9*+,=&%9*%7&#%#'+$n$'7&#1

@X!6;A6ETC@

S@;@%6!CA@;%G6?CRE6?%V;@!6?-%

ER%6ETBF<6%6G%T@;V@XR;%B@?A@%wF6%?6%G6%CEXCwF6%wF6%GR%B@V@1

T&8$(&7*#

Wiring

connection

e4&8*Z"r8%9*%

4,+7*,9&f

Setting Switch

eC8$*(('/$&(%9*%

4&82"3'(,4"r8f

Type

Switch

eC8$*(('/$&(%

9*%$"/&%

9*%

+,$*(n,f

Charge

Meter

Charge Status

e6#$,9&%9*%7,%4,(3,f-

<"3'(,%@-%%T&8$(&7*#

Wiring connection e4&8*Z"r8%9*%4,+7*,9&f-

Esto indica que los cables están conectados

de manera incorrecta. Desconecte los cables

de inmediato y conéctelos correctamente

para impedir que la batería sufra daños.

Charge Status%e6#$,9&%9*%7,%4,(3,f-

Se iluminará de color rojo cuando esté conectado el

suministro eléctrico.

Se iluminará de color verde cuando la batería esté

totalmente cargada.

En el modo Start (Arranque), esta función está

desactivada.

Setting Switch%eC8$*(('/$&(%9*%4&82"3'(,4"r8f-

Utilice este interruptor para alternar entre los modos

Charging (Cargando) y Start (Arranque) y cambiar el

amperaje de salida.

Charge Meter (10 amp charge mode only):

J]] ON N] \N ]

CHARGE LEVEL %

<"3'(,%W-%%DISCHARGED BATTERY

Initial charge current to the battery is at maximum.

J]] ON N] \N ]

CHARGE LEVEL %

<CVF;@%T-%%BATTERY ALMOST FULLY CHARGED

Charge current to the battery is reduced.

J]] ON N] \N ]

CHARGE LEVEL %

<"3'(,%X-%%FULLY CHARGED BATTERY

Charge current to the battery is minimal

and the green LED is on.

Página 6

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X<FETCRE@DC6EARD@EA6ECDC6EAR TRE<CVF;@TCpE

c. Conecte la pinza POSITIVA (ROJA) del cargador

al borne POSITIVO (POS, P, +) de la batería.

d. Colóquese usted y coloque el extremo libre del

cable tan lejos como sea posible de la batería;

luego, conecte la pinza NEGATIVA (NEGRA)

del cargador al extremo libre del cable.

e. No se ponga de frente a la batería

cuando realice la conexión final.

f. Al desconectar el cargador,

hágalo siempre en secuencia inversa a la

secuencia seguida para el procedimiento

de conexión e interrumpa primero la

conexión mientras se encuentre tan alejado

de la batería como resulte práctico.

g. Las baterías náuticas (embarcaciones)

deben extraerse y cargarse en tierra firme.

Para cargarlas a bordo, hacen falta equipos

especialmente diseñados para usos náuticos.

17. Utilice gafas de seguridad a prueba de

salpicaduras y guantes de trabajo de

caucho de alta resistencia aprobados

por el ANSI cada vez que conecte,

desconecte o trabaje cerca de la

batería. El ácido de la batería puede

causar ceguera permanente.

18. Conserve las etiquetas y placas del cargador.

Contienen información de seguridad importante.

Si faltan o son ilegibles, póngase en contacto con

Harbor Freight Tools para solicitar un reemplazo.

19. Este producto no es un juguete. Manténgalo

fuera del alcance de los niños.

20. Desenchufe el cargador para baterías del

tomacorriente antes de conectar sus cables a

una batería o realizar cualquier procedimiento

de inspección, mantenimiento o limpieza.

21. ?"%+"*8%*#$*%4,(3,9&(%/&#**%'8%9"#>'8$&(I%ER%

9*/*89,%q8"4,5*8$*%9*%o71%%

X*#,$*89*(%*7%4,(3,9&(%/'*9*%3*8*(,(%

'8%"84*89"&%>%9,t&#%,%7,%/(&/"*9,91

22. F$"7"4*%*#$*%4,(3,9&(%q8"4,5*8$*%4&8%+,$*(n,#%9*%

/7&5&Ks4"9&%7nH'"9&%&%+,$*(n,#%4&8%#*/,(,9&(*#%

9*%2"+(,%9*%_"9("&%,+#&(+*8$*1

Cuando cargue una batería libre de mantenimiento,

monitoree siempre el avance de la carga

revisando el Charge Meter. No cargue de

más las baterías libres de mantenimiento.

ER%FACGCT6%TRE%W@A6;y@?%X6%V6G1

23. No intente cargar baterías

defectuosas o no recargables.

24. No cargue más de una batería a la vez.

25. El servicio técnico de su cargador debe estar

a cargo de una persona calificada que utilice

únicamente piezas de repuesto idénticas

a las del equipo. Esto garantizará que se

mantenga la seguridad del cargador.

26. Cuando esté cansado o bajo la influencia

de drogas, alcohol o medicamentos, no

utilice el cargador. La más breve falta de

atención al operar un cargador puede

ocasionar graves lesiones personales.

27. Antes de mover el cargador, desconecte

el suministro eléctrico y la batería; luego,

permita que el cargador se enfríe.

28. Las personas que utilizan marcapasos deben

consultar a su(s) médico(s) antes de utilizar el

equipo. Los campos electromagnéticos próximos

a un marcapasos podrían interferir con el

funcionamiento del marcapasos o hacer que este

funcione mal. Además, las personas que utilizan

marcapasos deben:

• Evitar operar el cargador estando solos.

• Inspeccionar y realizar un mantenimiento

adecuado del equipo, para evitar descargas

eléctricas.

• Conectar a tierra correctamente el cable de

alimentación. También debe implementarse un

interruptor de circuito por falla a tierra (GFCI) que

impide las descargas eléctricas prolongadas.

29. Las advertencias, precauciones e instrucciones

que se ofrecen en este manual de instrucciones

no pueden cubrir todas las situaciones y

condiciones posibles que pueden ocurrir. El

operador del equipo debe entender que el

sentido común y la cautela son factores que no

pueden fabricarse e incorporarse al producto,

sino que corren por cuenta del operador.

%TRE?6;!6%6?A@?%CE?A;FTTCRE6?1

C8#$('44"&8*#%/,(,%7,%/'*#$,%,%$"*((,%>%7,%4&8*Z"r8%9*7%4,+7*%9*%,7"5*8$,4"r8%9*%T@%

Se debe conectar a tierra el cargador para reducir

el riesgo de descargas eléctricas. El cargador está

equipado con un cable que posee un conductor

que conecta a tierra el equipo y un enchufe para

conexión a tierra. El enchufe debe conectarse

a un tomacorriente que esté adecuadamente

instalado y conectado a tierra y que cumpla con

todos los códigos y ordenanzas locales.

S6GCV;R – Nunca altere el cable de CA ni el

enchufe provistos; si el enchufe no calza en el

tomacorriente, haga que un técnico calificado instale

un tomacorriente adecuado. Una conexión incorrecta

puede generar riesgo de descarga eléctrica.

S;6T@FTCRE%`%;"*#3&%9*%"84*89"&%&%

9*#4,(3,%*7o4$("4,1%Conecte el cargador para

baterías directamente a un tomacorriente con

conexión a tierra (tres patas). No debe utilizarse

un adaptador con el cargador para baterías.

Página 5

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X <FETCRE@DC6EAR D@EA6ECDC6EARTRE<CVF;@TCpE

g. Quítese cualquier artículo personal de metal,

como anillos, brazaletes, collares y relojes

cuando trabaje con una batería de plomo-ácido.

Una batería de plomo-ácido puede generar una

corriente de cortocircuito lo suficientemente alta

como para soldar un anillo o elemento similar

al metal, y causar, así, una grave quemadura.

h. Utilice el cargador para cargar únicamente

baterías de PLOMO-ÁCIDO. El cargador no debe

utilizarse para suministrar energía eléctrica a un

sistema eléctrico de bajo voltaje que se utilice

para aplicaciones que no sean las de un motor

de arranque. No utilice el cargador de baterías

para cargar las baterías secas que generalmente

se utilizan con los electrodomésticos. Esas

baterías pueden estallar y causar lesiones

a las personas y daños a la propiedad.

i. NUNCA cargue una batería helada.

12. PREPARATIVOS PARA LA CARGA

a. De ser necesario extraer la batería del vehículo

para cargarla, siempre quite primero de la batería

el terminal con conexión a tierra. Asegúrese

de que todos los accesorios del vehículo estén

apagados, para no generar un arco voltaico.

b. Asegúrese de que el área que rodea a la batería

esté bien ventilada mientras carga la batería.

c. Limpie los terminales de la batería.

Sea cuidadoso y evite que la corrosión

entre en contacto con los ojos.

d. Agregue agua destilada en cada celda hasta

que el ácido de la batería llegue al nivel

especificado por el fabricante de la batería.

No supere el límite máximo. En el caso de

las baterías cuyas celdas no poseen tapones

extraíbles, como las baterías de plomo-ácido

reguladas por válvula, siga cuidadosamente las

instrucciones del fabricante para la recarga.

e. Analice todas las precauciones específicas

indicadas por el fabricante de la batería

relativas al proceso de carga, y no supere

las tasas de carga recomendadas.

f. Inicialmente, cargue la batería a

la tasa más baja de carga.

13. UBICACIÓN DEL CARGADOR

a. Coloque el cargador tan lejos de la batería

como los cables de CC lo permitan.

b. Nunca coloque el cargador directamente

encima de la batería que está siendo

cargada; de lo contrario, los gases de la

batería corroerán y dañarán el cargador.

c. Nunca permita que el ácido de la batería

gotee sobre el cargador mientras realiza

la lectura de la gravedad específica

del electrolito o llena la batería.

d. No opere el cargador en áreas cerradas

ni restrinja la ventilación.

e. No coloque la batería encima del cargador.

14. PRECAUCIONES PARA LA CONEXIÓN A CC

a. Conecte y desconecte las pinzas de salida

de CC únicamente después de quitar el

cable de CA del enchufe. Nunca permita

que las pinzas entren en contacto.

b. Conecte las pinzas a la batería y al chasis como

se indica en 15(e), 15(f), y 16(b) a 16(d).

15. SIGA ESTOS PASOS CUANDO LA BATERÍA

ESTÉ INSTALADA EN EL VEHÍCULO. UNA

CHISPA CERCA DE LA BATERÍA PODRÍA

HACER QUE ESTA EXPLOTE. PARA

REDUCIR EL RIESGO DE QUE SE GENEREN

CHISPAS CERCA DE LA BATERÍA:

a. Coloque los cables de CA y CC de modo tal

de reducir el riesgo de daños causados por el

capó, la puerta o alguna pieza móvil del motor.

b. Manténgase alejado de aspas de ventilador,

correas, poleas y otras piezas que puedan

causar lesiones a las personas.

c. Verifique la polaridad de los bornes de la

batería. El borne POSITIVO (POS, P, +) de la

batería generalmente tiene un diámetro mayor

que el del borne NEGATIVO (NEG, N,–).

d. Determine qué borne de la batería posee

conexión a tierra (está conectado) al chasis. Si el

borne negativo está conectado al chasis (como

sucede en la mayoría de los vehículos), vea (e). Si

el borne positivo está conectado al chasis, vea (f).

e. En el caso de un vehículo que tenga el borne

negativo conectado a tierra, conecte la pinza

POSITIVA (ROJA) del cargador de baterías

al borne POSITIVO (POS, P, +) no conectado

a tierra de la batería. Conecte la pinza

NEGATIVA (NEGRA) al chasis o al bloque

del motor del vehículo, lejos de la batería.

No conecte la pinza al carburador, a tuberías

de combustible o a piezas de chapa de la

carrocería. Conecte a una pieza de metal de

alto calibre del bastidor o del bloque del motor.

f. En el caso de un vehículo que tenga el

borne positivo conectado a tierra, conecte la

pinza NEGATIVA (NEGRA) del cargador de

baterías al borne NEGATIVO (NEG, N, –) no

conectado a tierra de la batería. Conecte la

pinza POSITIVA (ROJA) al chasis o al bloque

del motor del vehículo, lejos de la batería.

No conecte la pinza al carburador, a tuberías

de combustible o a piezas de chapa de la

carrocería. Conecte a una pieza de metal de

alto calibre del bastidor o del bloque del motor.

g. Al desconectar el cargador, desconecte el cable

de CA, quite la pinza del chasis del vehículo y

luego retire la pinza de la terminal de la batería.

h. Para obtener información sobre el tiempo

de carga, consulte las instrucciones para la

operación.

16. SIGA ESTOS PASOS CUANDO LA BATERÍA ESTÉ

FUERA DEL VEHÍCULO. UNA CHISPA CERCA

DE LA BATERÍA PODRÍA HACER QUE ESTA

EXPLOTE. PARA REDUCIR EL RIESGO DE QUE

SE GENEREN CHISPAS CERCA DE LA BATERÍA:

a. Verifique la polaridad de los bornes de la

batería. El borne POSITIVO (POS, P, +) de la

batería generalmente tiene un diámetro mayor

que el del borne NEGATIVO (NEG, N, –).

b. Conecte un cable de batería con aislante

que tenga al menos 24 pulgadas de

longitud y calibre americano 6 al borne

NEGATIVO (NEG, N, –) de la batería.

Página 4

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X<FETCRE@DC6EARD@EA6ECDC6EAR TRE<CVF;@TCpE

CE?A;FTTCRE6?%CDSR;A@EA6?%X6%?6VF;CX@X

1. TRE?6;!6%6?A@?%CE?A;FTTCRE6? –

Este manual contiene instrucciones

importantes sobre seguridad y funcionamiento

de este cargador de baterías.

2. No exponga el cargador a la lluvia o la nieve.

3. La utilización de un accesorio no recomendado

o vendido por el fabricante del cargador

de baterías puede generar riesgo de

incendio, descarga eléctrica o lesiones.

4. Para reducir el riesgo de que el cable y el

enchufe resulten dañados, al desconectar el

cargador tire del enchufe y no del cable.

5. No debe utilizarse un cable de extensión a

menos que sea absolutamente necesario.

La utilización de un cable de extensión

inadecuado podría ocasionar riesgo de incendio

y descarga eléctrica. De ser necesario utilizar

un cable de extensión, asegúrese de que:

a. El enchufe del cable de extensión tenga

la misma cantidad de patas que el

enchufe del cargador, y que dichas patas

sean del mismo tamaño y forma;

b. El cable de extensión esté bien conectado

y en buenas condiciones eléctricas;

c. El cable sea lo suficientemente grande para

la potencia nominal de amperios de CA del

cargador, según se especifica en la Tabla B.

A,+7,%W-%%T,7"+(*%,5*("4,8&%/,(,%4,+7*#%

e@UVf%5n8"5&%(*4&5*89,9&%/,(,%4,+7*#%9*%

*Z$*8#"r8%/,(,%4,(3,9&(*#%9*%+,$*(n,#

S&$*84",%8&5"8,7%9*%T@%

9*%*8$(,9,I%*8%,5/*("&#[

@UV%9*7%4,+7*

G&83"$'9%9*7%4,+7*I%*8%/"*#

C3',7%&%

5,>&(%H'*

S*(&%5*8&(%

H'*

\N N] J]] JN]

0 2 18 18 18 16

2 3 18 18 16 14

3 4 18 18 16 14

4 5 18 18 14 12

5 6 18 16 14 12

6 8 18 16 12 10

8 10 18 14 12 10

10 12 16 14 10 8

12 14 16 12 10 8

14 16 16 12 10 8

16 18 14 12 8 8

18 20 14 12 8 6

* Si la potencia nominal de entrada de un cargador está indicada

en vatios y no en amperios, la potencia nominal correspondiente en

amperios debe determinarse dividiendo la potencia nominal de vatios

por la potencia nominal de voltaje – por ejemplo:

1250 vatios/125 voltios= 10 amperios

6. No opere el cargador si el cable o el enchufe están

dañados; reemplace el cable o el enchufe de

inmediato.

7. No opere el cargador si este ha recibido un golpe

fuerte, si se ha caído o ha sufrido algún otro

daño; hágalo revisar por un técnico calificado.

8. No desarme el cargador; cuando sea

necesario repararlo o hacerle tareas de

mantenimiento, acuda a un técnico calificado.

Un reensamblaje incorrecto puede ocasionar

riesgo de descarga eléctrica o incendio.

9. Para reducir el riesgo de sufrir una descarga

eléctrica, desenchufe el cargador del

tomacorriente antes de realizar tareas

de limpieza o mantenimiento. Apagar los

controles no reducirá ese riesgo.

10. ADVERTENCIA – RIESGO DE GASES

EXPLOSIVOS.

a. TRABAJAR EN LAS PROXIMIDADES DE

UNA BATERÍA DE PLOMO-ÁCIDO ES

PELIGROSO. DURANTE SU FUNCIONAMIENTO

NORMAL, LAS BATERÍAS GENERAN

GASES EXPLOSIVOS. POR LO TANTO, ES

DE VITAL IMPORTANCIA QUE SIGA LAS

INSTRUCCIONES CADA VEZ QUE UTILICE EL

CARGADOR.

b. Para reducir el riesgo de que la batería explote,

siga estas instrucciones y las publicadas por

el fabricante de la batería y por el fabricante

de cualquier equipo que desee utilizar en

las proximidades de la batería. Repase

las señales de precaución que aparecen

en estos productos y en el motor.

11. PRECAUCIONES PERSONALES

a. Tenga en cuenta la posibilidad de tener a

alguien lo suficientemente cerca de usted

como para que acuda en su ayuda cuando

trabaje cerca de una batería de plomo-ácido.

b. Tenga abundante agua y jabón cerca

por si el ácido de la batería entra en

contacto con su piel, ropa u ojos.

c. Utilice protectores totales de ojos y ropa. Evite

tocarse los ojos cuando trabaja cerca de la

batería.

d. Si el ácido de la batería entra en contacto

con la piel o la ropa, lave inmediatamente con

agua y jabón. Si el ácido ingresa en los ojos,

lávelos inmediatamente con abundante agua

fría del grifo durante al menos 10 minutos

y solicite atención médica de inmediato.

e. NUNCA fume ni permita que haya

chispas o llama en las proximidades

de la batería o del motor.

f. Sea extra precavido para reducir el riesgo de

dejar caer una herramienta de metal sobre la

batería. Podrían hacer que la batería u otras

piezas eléctricas generen chispas o entren

en cortocircuito y ocasionen explosiones.

Página 3

Artículo 60581

?"%9*#*,%(*,7"Y,(%/(*3'8$,#%$o48"4,#I%77,5*%,7%JKLLLKLMMKNOPO1

?6VF;CX@X <FETCRE@DC6EAR D@EA6ECDC6EARTRE<CVF;@TCpE

T&8$*8"9&

Seguridad ................................................... 2

Especificaciones ......................................... 6

Funcionamiento .......................................... 6

Mantenimiento ........................................... 11

Garantía..................................................... 12

?yDWRGR?%X6%@X!6;A6ETC@%Q%X6<CECTCRE6?

Este es el símbolo de alerta de seguridad. Se utiliza para alertarlo sobre potenciales

riesgos de sufrir lesiones personales. Para evitar posibles lesiones o la muerte,

acate todos los mensajes de seguridad que acompañan a esta señal.

S6GCV;R

Indica una situación peligrosa que, de no evitarse,

provocará la muerte o lesiones graves.

@X!6;A6ETC@

Indica una situación peligrosa que, de no evitarse, podría

provocar la muerte o lesiones graves.

S;6T@FTCpE

Indica una situación peligrosa que, de no evitarse, podría

provocar lesiones menores o de moderada gravedad.

S;6T@FTCpE

AVISO

Hace referencia a prácticas no relacionadas con lesiones personales.

Canadian Standards Association

Underwriters Laboratories, Inc.

!@T

Voltios corriente alterna

Amperios

TT@

Amperios de arranque en frío

Capacidad de reserva

Amperios-hora

Señal de ADVERTENCIA que refiere

a riesgo de sufrir lesiones oculares.

Utilice gafas de seguridad a prueba de

salpicaduras aprobadas por el ANSI.

Lea el manual antes de la

instalación y/o el uso.

Señal de ADVERTENCIA que

refiere a riesgo de incendio.

Siga el procedimiento para la conexión.

Página 2

!"#"$*%8'*#$(&%#"$"&%)*+-%.$$/-00)))1.,(+&(2(*"3.$14&5

?"%7&%8*4*#"$,I%*8_n*%'8%4&((*&%*7*4$(r8"4&%,%8'*#$(&%

?*(_"4"&%Ao48"4&-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5

ARTÍCULO

60581

10/2/50 AMPERIOS 12 VOLTIOS

CARGADOR/ARRANCADOR

DE BATERÍAS

;6!%?Jj,

AVISO

¡IMPORTANTE! Esta edición en

español del manual es una traducción

del manual original Inglés. El manual

original Inglés reemplaza a esta

información si hay una inconsistencia.

Manual del Usuario y Instrucciones de Seguridad

Conserve Este Manual Guarde este manual para consultas futuras sobre las advertencias y precauciones de

seguridad y los procedimientos de montaje, funcionamiento, inspección, mantenimiento y limpieza. Escriba el número de

serie del producto en el dorso del manual junto al esquema de montaje (o el mes y año de la compra si el producto no

tiene número). Conserve este manual y el comprobante de compra en un lugar seco y seguro para futuras consultas.

Al desembalar el producto, asegúrese de que esté intacto

y no haya sufrido daños. Si alguna pieza falta o está rota,

llame al 1-888-866-5797 tan pronto como sea posible.

2012 por Harbor Freight Tools

prohibido cualquier tipo de reproducción de los contenidos de este manual, incluyendo

sus ilustraciones gráficas, sin el expreso consentimiento escrito de Harbor Freight Tools.

Es posible que los diagramas incluidos en este manual no hayan sido dibujados

guardando las proporciones. Debido a las mejoras continuas, el producto real puede

diferir ligeramente del descrito en este documento. Es posible que las herramientas

necesarias para el montaje y el mantenimiento técnico no estén incluidas.

@X!6;A6ETC@

G*,%*7%#"3'"*8$*%5,$*(",7%,8$*#%

9*%'#,(%*#$*%/(&9'4$&1

X*%8&%.,4*(7&I%/&9(n,%#'2("(%7*#"&8*#%3(,_*#1%

TRE?6;!6%6?A6%D@EF@G1

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5

65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 20j

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2012 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Too ls r eq ui re d for a ss em bl y and s er vi ce m ay not be i nc lu de d.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60581

EF;6GH IJ6KFGLIM NFLMG6MFMO6EJ6OL;LOFGLIME

G,+7*%&2%O&8$*8$#

Safety ......................................................... 2

Specifications ............................................. 6

Operation .................................................... 6

Maintenance .............................................. 11

Warranty .................................................... 12

PFKMLMQ%EHNRISE%FMT%T6;LMLGLIME

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

!FO

Volts Alternating Current

Amperes

OOF

Cold Cranking Amps

Reserve Capacity

Ampere-hours

WARNING marking

concerning Risk of Eye Injury.

Wear ANSI-approved

splash-resistant safety goggles.

Read the manual before

set-up and/or use.

WARNING marking

concerning Risk of Fire.

Follow connection procedure.

Page 3;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 60581

EF;6GHIJ6KFGLIMNFLMG6MFMO6 EJ6OL;LOFGLIME

LNJIKGFMG%EF;6GH%LMEGKUOGLIME

1. EF!6%GV6E6%LMEGKUOGLIME –

This manual contains important safety and

operating instructions for this battery charger.

2. Do not expose charger to rain or snow.

3. Use of an attachment not recommended or sold

by the battery charger manufacturer may result in

a risk of fire, electric shock, or injury to persons.

4. To reduce risk of damage to electric

plug and cord, pull by plug rather than

cord when disconnecting charger.

5. An extension cord should not be used unless

absolutely necessary. Use of improper extension

cord could result in a risk of fire and electric shock.

If an extension cord must be used, make sure:

a. That pins on plug of extension cord

are the same number, size, and shape

as those of plug on charger;

b. That extension cord is properly wired

and in good electrical condition; and

c. That wire size is large enough for AC ampere

rating of charger as specified in Table A.

G,+7*%F-%%K*4&55*89*9%5"8"5'5%FPQ%#"W*%

2&(%*X$*8#"&8%4&(9#%2&(%+,$$*(Y%4.,(3*(#

FO%"8/'$%(,$"83=%,5/*(*#Z

FPQ%#"W*%&2%4&(9

S*83$.%&2%4&(9=%2**$

6<',7%$&%&(%

3(*,$*(%$.,8

R'$%7*##%

$.,8

[B B\ >\\ >B\

0 2 18 18 18 16

2 3 18 18 16 14

3 4 18 18 16 14

4 5 18 18 14 12

5 6 18 16 14 12

6 8 18 16 12 10

8 10 18 14 12 10

10 12 16 14 10 8

12 14 16 12 10 8

14 16 16 12 10 8

16 18 14 12 8 8

18 20 14 12 8 6

* If the input rating of a charger is given in watts rather than in

amperes, the corresponding ampere rating is to be determined by

dividing the wattage rating by the voltage rating – for example:

1250 watts/125 volts = 10 amperes

6. Do not operate charger with damaged cord or plug

– replace the cord or plug immediately.

7. Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in

any way; take it to a qualified serviceman.

8. Do not disassemble charger; take it to a

qualified serviceman when service or repair

is required. Incorrect reassembly may

result in a risk of electric shock or fire.

9. To reduce risk of electric shock, unplug charger

from outlet before attempting any maintenance or

cleaning. Turning off controls will not reduce this risk.

10. WARNING – RISK OF EXPLOSIVE GASES.

a. WORKING IN VICINITY OF A LEAD-ACID

BATTERY IS DANGEROUS. BATTERIES

GENERATE EXPLOSIVE GASES DURING

NORMAL BATTERY OPERATION. FOR THIS

REASON, IT IS OF UTMOST IMPORTANCE

THAT YOU FOLLOW THE INSTRUCTIONS

EACH TIME YOU USE THE CHARGER.

b. To reduce risk of battery explosion, follow

these instructions and those published by

battery manufacturer and manufacturer of

any equipment you intend to use in vicinity

of battery. Review cautionary marking

on these products and on engine.

11. PERSONAL PRECAUTIONS

a. Consider having someone close

enough by to come to your aid when

you work near a lead-acid battery.

b. Have plenty of fresh water and soap nearby in

case battery acid contacts skin, clothing, or eyes.

c. Wear complete eye protection and

clothing protection. Avoid touching

eyes while working near battery.

d. If battery acid contacts skin or clothing,

wash immediately with soap and water.

If acid enters eye, immediately flood eye with

running cold water for at least 10 minutes

and get medical attention immediately.

e. NEVER smoke or allow a spark or flame

in vicinity of battery or engine.

f. Be extra cautious to reduce risk of dropping

a metal tool onto battery. It might spark

or short-circuit battery or other electrical

part that may cause explosion.

g. Remove personal metal items such as rings,

bracelets, necklaces, and watches when

working with a lead-acid battery. A lead-

acid battery can produce a short-circuit

current high enough to weld a ring or the

like to metal, causing a severe burn.

Page 4 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60581

EF;6GH IJ6KFGLIM NFLMG6MFMO6EJ6OL;LOFGLIME

h. Use charger for charging a LEAD-ACID battery

only. It is not intended to supply power to a

low voltage electrical system other than in a

starter-motor application. Do not use battery

charger for charging dry-cell batteries that

are commonly used with home appliances.

These batteries may burst and cause injury

to persons and damage to property.

i. NEVER charge a frozen battery.

12. PREPARING TO CHARGE

a. If necessary to remove battery from vehicle

to charge, always remove grounded terminal

from battery first. Make sure all accessories in

the vehicle are off, so as not to cause an arc.

b. Be sure area around battery is well

ventilated while battery is being charged.

c. Clean battery terminals. Be careful to keep

corrosion from coming in contact with eyes.

d. Add distilled water in each cell until battery

acid reaches level specified by battery

manufacturer. Do not overfill. For a battery

without removable cell caps, such as valve

regulated lead acid batteries, carefully follow

manufacturer’s recharging instructions.

e. Study all battery manufacturer’s

specific precautions while charging and

recommended rates of charge.

f. Charge battery initially at lowest rate.

13. CHARGER LOCATION

a. Locate charger as far away from

battery as DC cables permit.

b. Never place charger directly above

battery being charged; gases from battery

will corrode and damage charger.

c. Never allow battery acid to drip on

charger when reading electrolyte

specific gravity or filling battery.

d. Do not operate charger in a closed-in

area or restrict ventilation in any way.

e. Do not set a battery on top of charger.

14. DC CONNECTION PRECAUTIONS

a. Connect and disconnect DC output clips only

after removing AC cord from electric outlet.

Never allow clips to touch each other.

b. Attach clips to battery and chassis as indicated

in 15(e), 15(f), and 16(b) through 16(d).

15. FOLLOW THESE STEPS WHEN BATTERY

IS INSTALLED IN VEHICLE. A SPARK NEAR

BATTERY MAY CAUSE BATTERY EXPLOSION.

TO REDUCE RISK OF A SPARK NEAR BATTERY:

a. Position AC and DC cables to reduce risk of

damage by hood, door, or moving engine part.

b. Stay clear of fan blades, belts, pulleys, and

other parts that can cause injury to persons.

c. Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has larger

diameter than NEGATIVE (NEG, N,–) post.

d. Determine which post of battery is

grounded (connected) to the chassis. If

negative post is grounded to chassis (as

in most vehicles), see (e). If positive post

is grounded to the chassis, see (f).

e. For negative-grounded vehicle, connect

POSITIVE (RED) clip from battery charger

to POSITIVE (POS, P, +) ungrounded post

of battery. Connect NEGATIVE (BLACK)

clip to vehicle chassis or engine block

away from battery. Do not connect clip to

carburetor, fuel lines, or sheet-metal body

parts. Connect to a heavy gauge metal

part of the frame or engine block.

f. For positive-grounded vehicle, connect

NEGATIVE (BLACK) clip from battery charger

to NEGATIVE (NEG, N, –) ungrounded post of

battery. Connect POSITIVE (RED) clip to vehicle

chassis or engine block away from battery.

Do not connect clip to carburetor, fuel lines, or

sheet-metal body parts. Connect to a heavy

gauge metal part of the frame or engine block.

g. When disconnecting charger, disconnect AC cord,

remove clip from vehicle chassis, and

then remove clip from battery terminal.

h. See operating instructions for

length of charge information.

16. FOLLOW THESE STEPS WHEN BATTERY

IS OUTSIDE VEHICLE. A SPARK NEAR THE

BATTERY MAY CAUSE BATTERY EXPLOSION.

TO REDUCE RISK OF A SPARK NEAR BATTERY:

a. Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has a larger

diameter than NEGATIVE (NEG, N, –) post.

b. Attach at least a 24-inch-long 6-gauge

(AWG) insulated battery cable to

NEGATIVE (NEG, N, –) battery post.

c. Connect POSITIVE (RED) charger clip to

POSITIVE (POS, P, +) post of battery.

Page 5;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 60581

EF;6GHIJ6KFGLIMNFLMG6MFMO6 EJ6OL;LOFGLIME

d. Position yourself and free end of cable

as far away from battery as possible

– then connect NEGATIVE (BLACK)

charger clip to free end of cable.

e. Do not face battery when

making final connection.

f. When disconnecting charger,

always do so in reverse sequence of connecting

procedure and break first connection while

as far away from battery as practical.

g. A marine (boat) battery must be removed and

charged on shore. To charge it on board requires

equipment specially designed for marine use.

17. %%%%%%%%%%%%%Wear ANSI-approved splash-resistant

safety goggles and heavy-duty rubber

work gloves whenever connecting,

disconnecting, or working near battery.

Battery acid can cause

permanent blindness.

18. Do not use Start setting to charge

batteries. Use to jump start only.

19. Maintain labels and nameplates on the charger.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

20. This product is not a toy.

Keep it out of reach of children.

21. Unplug the Battery Charger from its

electrical outlet before connecting its cables

to a battery, or performing any inspection,

maintenance, or cleaning procedures.

22. F7$.&'3.%$."#%O.,(3*(%.,#%,8%,'$&5,$"4%4'$%&22]%

9&%MIG%9*/*89%#&7*7Y%&8%,'$&5,$"4%4'$%&221%%%

S*,^"83%O.,(3*(%'8,$$*89*9%4,8%(*#'7$%

"8%2"(*%,89%/(&/*($Y%9,5,3*1

23. U#*%$."#%O.,(3*(%)"$.%27&&9*9%7*,9?,4"9%&(%

FQN%+,$$*("*#%&87Y1

When charging a maintenance-free battery,

always monitor the progress of

the charge by viewing the Charge Meter.

Do not overcharge a maintenance-free battery.

TI%MIG%UE6%PLGV%Q6S%RFGG6KL6E1

24. Do not attempt to charge non-rechargeable

or defective batteries.

25. Do not charge more than one battery at one time.

26. Have your charger serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of

the charger is maintained.

27. Do not use charger while you are tired or under

the influence of drugs, alcohol or medication.

A moment of inattention while operating charger

may result in serious personal injury.

28. Before moving charger, disconnect power supply

and battery, then allow charger to cool.

29. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields in

close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure.

In addition, people with pacemakers should:

• Avoid operating alone.

• Properly maintain and inspect

to avoid electrical shock.

• Properly ground power cord. Ground Fault Circuit

Interrupter (GFCI) should also be implemented

– it prevents sustained electrical shock.

30. The warnings, precautions, and instructions

discussed in this instruction manual cannot

cover all possible conditions and situations

that may occur. It must be understood by the

operator that common sense and caution are

factors which cannot be built into this product,

but must be supplied by the operator.

%EF!6%GV6E6%LMEGKUOGLIME1

Q(&'89"83%,89%FO%J&)*(%O&(9%O&88*4$"&8%L8#$('4$"&8#

Charger should be grounded to reduce risk of electric

shock. Charger is equipped with an electric cord

having an equipment-grounding conductor and a

grounding plug. The plug must be plugged into an

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

TFMQ6K – Never alter AC cord or plug provided

– if it will not fit outlet, have proper outlet installed

by a qualified electrician. Improper connection

can result in a risk of an electric shock.

OFUGLIM%_%K"#`%&2%;"(*%&(%67*4$("4%E.&4`1%

Connect battery charger directly to grounding

receptacle (three-prong). An adapter should

not be used with battery charger.

Page 6 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60581

EF;6GH IJ6KFGLIM NFLMG6MFMO6EJ6OL;LOFGLIME

E/*4"2"4,$"&8#

Input 120VAC, 60Hz, 2.2A

Output 12 VDC -% 10*%A

12 VDC -% 2*%A

12 VDC Engine Start -% 50% A

ZF5/*(,3*%"#%&87Y%/(*#*8$%).*8%$.*%'8"$%"#%

4&88*4$*9%$&%,%+,$$*(Y%&(%"8%EGFKG%5&9*1

I/*(,$"&8%L8#$('4$"&8#

%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*X$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

GI%JK6!6MG%E6KLIUE%LMaUKH-%

TI%MIG%JSUQ%LM%OVFKQ6K%UMGLS%TLK6OG6T%GI%TI%EI1

O&8$(&7#

P"("83%

O&88*4$"&8

E*$$"83%

#)"$4.

GY/*%

#)"$4.

O.,(3*%

N*$*(

O.,(3*%

E$,$'#

;"3'(*%F-%%O&8$(&7#

P"("83%O&88*4$"&8-

This indicates that the cables are connected improperly.

Immediately disconnect the cables and connect

them properly to prevent damage to the battery.

O.,(3*%E$,$'#-

This will light up red when the power is connected.

This will light up green when the battery is fully charged.

This is disabled in start mode.

E*$$"83%#)"$4.-

Use this to switch between charging and start modes

and change the output amperage.

R,$$*(Y%GY/*%#)"$4.-

Use this to set the battery type:

• Set to Regular for flooded and maintenance-free batteries.

• Set to AGM for Absorbed Glass Mat batteries.

PFKMLMQb%%GI%JK6!6MG%6cJSIELIM-%

TI%MIG%UE6%PLGV%Q6S%RFGG6KL6E1

O.,(3*%N*$*(%d>\%,5/%4.,(3*%5&9*%&87Ye-

>\\ CB B\ [B \

OVFKQ6%S6!6S%f

;"3'(*%R-%%TLEOVFKQ6T%RFGG6KH

Initial charge current to the battery is at maximum.

>\\ CB B\ [B \

OVFKQ6%S6!6S%f

;LQUK6%O-%%RFGG6KH%FSNIEG%;USSH%OVFKQ6T

Charge current to the battery is reduced.

>\\ CB B\ [B \

OVFKQ6%S6!6S%f

;"3'(*%T-%%;USSH%OVFKQ6T%RFGG6KH

Charge current to the battery is minimal

and the green LED is on.

Page 7;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 60581

EF;6GHIJ6KFGLIMNFLMG6MFMO6 EJ6OL;LOFGLIME

Sometimes conditions such as a cold battery, a sulfated battery, or a deeply discharged lead calcium

battery may cause Charge Meter to read near a full charge when charging process is only beginning.

M&$*- The Charge Meter shows the amount of current being drawn from the charger. It does not show what the

charger is capable of delivering. When the battery is fully charged and registering 100% on the Charge Meter,

a small charge will continue to move from the charger to the battery. If the charger is not disconnected from the

battery, eventually heat build up will cause the battery acid to boil and overcharge the battery causing damage to

the battery. Monitor battery charging progress constantly and if battery gets warm, stop charging it immediately.

J(*/,("83%$&%O.,(3*

U#*%$."#%4.,(3*(%&87Y%&8%27&&9*9%7*,9?,4"9%+,$$*("*#1%%%

I$.*(%+,$$*("*#%5,Y%+*%9,5,3*9%&(%5,Y%&^*(.*,$=%7*,`=%&(%4,$4.%2"(*1

GI%JK6!6MG%E6KLIUE%LMaUKH-%

P*,(%FMEL?,//(&^*9%#/7,#.?(*#"#$,8$%#,2*$Y%3&337*#%,89%.*,^Y?9'$Y%('++*(%)&(`%37&^*#%

).*8*^*(%4&88*4$"83=%9"#4&88*4$"83=%&(%)&(`"83%8*,(%+,$$*(Y1%%%

R,$$*(Y%,4"9%4,8%4,'#*%/*(5,8*8$%+7"898*##1

1. If necessary to remove battery from vehicle to

charge, always remove grounded terminal from

battery first. Make sure all accessories in the

vehicle are off, so as not to cause an arc.

2. Make sure area around battery is well

ventilated while battery is being charged.

3. Clean battery terminals. Be careful to keep

corrosion from coming in contact with eyes.

4. Add distilled water in each cell until battery acid

reaches level specified by battery manufacturer.

Do not overfill. For a battery without

removable cell caps, such as valve

regulated lead acid batteries, carefully follow

manufacturer’s recharging instructions.

5. Study all battery manufacturer’s specific precautions

while charging and recommended rates of charge.

6. Charge battery initially at lowest rate.

7. A marine (boat) battery must be removed and

charged on shore. To charge it on board requires

equipment specially designed for marine use.

EVIKG6T%RFGG6KL6E%?%will read on

Charge Meter as a high end peg at beginning of

charging process. If after 5-10 minutes, needle

does not move off high end, the battery probably has

a short circuit. Unplug charger and discontinue use.

Have battery checked by a qualified technician.

OIST%RFGG6KL6E%? begin charging at a low rate,

increase as battery reaches a normal temperature,

then rate will decrease normally.

TI%MIG%OVFKQ6%F%;KIg6M%RFGG6KH1

RFGG6KL6E%PLGV%VHTKIN6G6K%6H6-

Do not depend on hydrometer eye to

determine battery charge level.

O.,(3*(%S&4,$"&8

1. Locate charger as far away from

battery as DC cables permit.

2. Never place charger directly above

battery being charged; gases from battery

will corrode and damage charger.

3. Never allow battery acid to drip on charger when

reading electrolyte specific gravity or filling battery.

4. Do not operate charger in a closed-in

area or restrict ventilation in any way.

5. Do not set a battery on top of charger.

Page 8 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60581

EF;6GH IJ6KFGLIM NFLMG6MFMO6EJ6OL;LOFGLIME

O.,(3"83%R,$$*(Y%L8#$,77*9%"8%!*."47*

F%EJFKh%M6FK%RFGG6KH%NFH%OFUE6%RFGG6KH%6cJSIELIM1%%

GI%K6TUO6%KLEh%I;%F%EJFKh%M6FK%RFGG6KH%;ISSIP%GV6E6%LMEGKUOGLIME%6cFOGSH1

GI%JK6!6MG%E6KLIUE%LMaUKH-%

P*,(%FMEL?,//(&^*9%#/7,#.?(*#"#$,8$%#,2*$Y%3&337*#%,89%.*,^Y?9'$Y%('++*(%)&(`%37&^*#%

).*8*^*(%4&88*4$"83=%9"#4&88*4$"83=%&(%)&(`"83%8*,(%+,$$*(Y1%%%

R,$$*(Y%,4"9%4,8%4,'#*%/*(5,8*8$%+7"898*##1

PFKMLMQb T&%8&$%'#*%E$,($%#*$$"83%$&%

4.,(3*%+,$$*("*#1%%U#*%$&%i'5/%#$,($%&87Y1

1. Position AC and DC cables to reduce risk of

damage by hood, door, or moving engine part.

2. Stay clear of fan blades, belts, pulleys, and

other parts that can cause injury to persons.

3. Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has larger

diameter than NEGATIVE (NEG, N,–) post.

4. Determine which post of battery is grounded

(connected) to the chassis. If negative post is

grounded to chassis (as in most vehicles), see 5.

If positive post is grounded to the chassis, see 6.

5. For negative-grounded vehicle, connect

POSITIVE (RED) clip from battery charger to

POSITIVE (POS, P, +) ungrounded post of battery.

Connect NEGATIVE (BLACK) clip to vehicle

chassis or engine block away from battery.

Do not connect clip to carburetor, fuel lines, or

sheet-metal body parts. Connect to a heavy

gauge metal part of the frame or engine block.

MIGLO6-%%L2%$.*%K*^*(#*%O&88*4$"&8%"89"4,$&(%7"3.$#=%

$.*%4,+7*#%,(*%4&88*4$*9%"5/(&/*(7Y1%%

L55*9",$*7Y%9"#4&88*4$%$.*%4,+7*#%,89%4&88*4$%

$.*5%/(&/*(7Y%$&%/(*^*8$%9,5,3*%$&%$.*%+,$$*(Y1

6. For positive-grounded vehicle, connect

NEGATIVE (BLACK) clip from battery charger

to NEGATIVE (NEG, N, –) ungrounded post of

battery. Connect POSITIVE (RED) clip to vehicle

chassis or engine block away from battery.

Do not connect clip to carburetor, fuel lines, or

sheet-metal body parts. Connect to a heavy

gauge metal part of the frame or engine block.

M&$*- If the charger cycles between maximum charge

level and a lower charge level when first connected,

then the battery may be fully charged or nearly fully

charged. Further charging may not be needed.

If charging is attempted, charge at a lower rate and

carefully monitor charge level to avoid battery damage.

7. Set Battery Type switch according to battery type:

• Set to Regular for flooded and

maintenance-free batteries.

• Set to AGM for Absorbed Glass Mat batteries.

PFKMLMQb%%GI%JK6!6MG%6cJSIELIM-%

TI%MIG%UE6%PLGV%Q6S%RFGG6KL6E1

8. Set Setting switch to 2A Trickle Charge

or 10A Quick Charge.

PFKMLMQb T&%8&$%'#*%B\F%65*(3*84Y%683"8*%E$,($%

2'84$"&8%2&(%4.,(3"831

9. After switches are set, plug in charger.

10. Monitor the charging process.

The Charge Complete indicator will light up

and blink when the battery is fully charged.

11. When disconnecting charger, disconnect AC cord,

remove clip from vehicle chassis, and then

remove clip from battery terminal.

12. After use clean, then store the charger

indoors out of children’s reach.

Page 9;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 60581

EF;6GHIJ6KFGLIMNFLMG6MFMO6 EJ6OL;LOFGLIME

O.,(3"83%R,$$*(Y%I'$#"9*%!*."47*

F%EJFKh%M6FK%RFGG6KH%NFH%OFUE6%RFGG6KH%6cJSIELIM1%%

GI%K6TUO6%KLEh%I;%F%EJFKh%M6FK%RFGG6KH%;ISSIP%GV6E6%LMEGKUOGLIME%6cFOGSH1

GI%JK6!6MG%E6KLIUE%LMaUKH-%

P*,(%FMEL?,//(&^*9%#/7,#.?(*#"#$,8$%#,2*$Y%3&337*#%,89%.*,^Y?9'$Y%('++*(%)&(`%37&^*#%

).*8*^*(%4&88*4$"83=%9"#4&88*4$"83=%&(%)&(`"83%8*,(%+,$$*(Y1%%%

R,$$*(Y%,4"9%4,8%4,'#*%/*(5,8*8$%+7"898*##1

PFKMLMQb T&%8&$%'#*%E$,($%#*$$"83%$&%

4.,(3*%+,$$*("*#1%%U#*%$&%i'5/%#$,($%&87Y1

1. Check polarity of battery posts. POSITIVE

(POS, P, +) battery post usually has a larger

diameter than NEGATIVE (NEG, N, –) post.

2. Attach at least a 24-inch-long 6-gauge

(AWG) insulated battery cable to

NEGATIVE (NEG, N, –) battery post.

3. Connect POSITIVE (RED) charger clip to

POSITIVE (POS, P, +) post of battery.

4. Position yourself and free end of cable as far away

from battery as possible – then connect NEGATIVE

(BLACK) charger clip to free end of cable.

5. Do not face battery when making final connection.

MIGLO6-%%L2%$.*%K*^*(#*%O&88*4$"&8%"89"4,$&(%7"3.$#=%

$.*%4,+7*#%,(*%4&88*4$*9%"5/(&/*(7Y1%%

L55*9",$*7Y%9"#4&88*4$%$.*%4,+7*#%,89%4&88*4$%

$.*5%/(&/*(7Y%$&%/(*^*8$%9,5,3*%$&%$.*%+,$$*(Y1

6. Set Battery Type switch according to battery type:

• Set to Regular for flooded and

maintenance-free batteries.

• Set to AGM for Absorbed Glass Mat batteries.

PFKMLMQb%%GI%JK6!6MG%6cJSIELIM-%

TI%MIG%UE6%PLGV%Q6S%RFGG6KL6E1

7. Set Setting switch to 2A Trickle Charge

or 10A Quick Charge.

PFKMLMQb T&%8&$%'#*%B\F%65*(3*84Y%683"8*%E$,($%

2'84$"&8%2&(%4.,(3"831

8. After switches are set, plug in charger.

9. Monitor the charging process.

The Charge Complete indicator will light up

and blink when the battery is fully charged.

10. When disconnecting charger, always do

so in reverse sequence of connecting

procedure and break first connection while

as far away from battery as practical.

11. After use clean, then store the charger

indoors out of children’s reach.

Page 10 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 60581

EF;6GH IJ6KFGLIM NFLMG6MFMO6EJ6OL;LOFGLIME

>[!%683"8*%E$,($"83

E&5*%^*."47*#%)"$.%&8+&,(9%4&5/'$*(#%5,Y%+*%9,5,3*9%2(&5%$.*%."3.?4'((*8$%#$,($"83%&'$/'$1%%%

G.&(&'3.7Y%(*,9%$.*%^*."47*%#*(^"4*%5,8',7%+*2&(*%'#"83%$."#%/(&4*9'(*1

PFKMLMQb T&%8&$%'#*%E$,($%#*$$"83%$&%

4.,(3*%+,$$*("*#1%%U#*%$&%i'5/%#$,($%&87Y1

M&$*-%During extremely cold weather or when battery

is severely exhausted, charge the battery for about

five minutes before attempting to turn on engine.

1. Unplug the Charger AC power

cord from the AC outlet.

2. For negative-grounded vehicle, connect

POSITIVE (RED) clip from battery charger to

POSITIVE (POS, P, +) ungrounded post of battery.

Connect NEGATIVE (BLACK) clip to vehicle

chassis or engine block away from battery.

Do not connect clip to carburetor, fuel lines, or

sheet-metal body parts. Connect to a heavy gauge

metal part of the frame or engine block.

MIGLO6-%%L2%$.*%K*^*(#*%O&88*4$"&8%"89"4,$&(%7"3.$#=%

$.*%4,+7*#%,(*%4&88*4$*9%"5/(&/*(7Y1%%

L55*9",$*7Y%9"#4&88*4$%$.*%4,+7*#%,89%4&88*4$%

$.*5%/(&/*(7Y%$&%/(*^*8$%9,5,3*%$&%$.*%+,$$*(Y1

3. Position AC and DC cables to reduce risk of

damage by hood, door, or moving engine part.

4. Set Battery Type switch according to battery type:

• Set to Regular for flooded and

maintenance-free batteries.

• Set to AGM for Absorbed Glass Mat batteries.

PFKMLMQb%%GI%JK6!6MG%6cJSIELIM-%

TI%MIG%UE6%PLGV%Q6S%RFGG6KL6E1

5. Set Setting switch to 50A Emergency Engine Start.

6. After switches are set, plug in charger.

7. PFKMLMQb%%GI%JK6!6MG%E6KLIUE%

LMaUKH=%;LK6=%FMT%TFNFQ6%GI%

OVFKQ6K%FMT%RFGG6KH=%2&77&)%B%#*4&89%

5,X"5'5%)"$.%j%5"8'$*%5"8"5'5%(*#$%

9'$Y%4Y47*%2&(%$.*%E$,($%5&9*1

8. To start the engine, turn ignition key.%%

IMSH%h66J%OVFKQ6K%LM%EGFKG%NIT6%

UJ%GI%B%E6OIMTE%FG%F%GLN61

9. If engine fails to start, charge battery for an

additional five minutes before attempting to start.

10. After the engine starts, unplug the power cord from

outlet before disconnecting the DC cable clamps.

Page 11;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 60581

EF;6GHIJ6KFGLIMNFLMG6MFMO6 EJ6OL;LOFGLIME

K*4&(9%J(&9'4$k#%E*(",7%M'5+*(%V*(*-%

M&$*- If product has no serial number, record month and year of purchase instead.

M&$*- Internal parts are not user-serviceable. Replacement parts are not available. Reference UPC 792363605816.

N,"8$*8,84*%L8#$('4$"&8#

%J(&4*9'(*#%8&$%#/*4"2"4,77Y%*X/7,"8*9%"8%$."#%5,8',7%5'#$%

+*%/*(2&(5*9%&87Y%+Y%,%<',7"2"*9%$*4.8"4",81

GI%JK6!6MG%E6KLIUE%LMaUKH-%%U8/7'3%$.*%4.,(3*(=%9"#4&88*4$%,8Y%+,$$*(Y=%,89%,77&)%4.,(3*(%

$&%4&&7%4&5/7*$*7Y%+*2&(*%/*(2&(5"83%,8Y%"8#/*4$"&8=%5,"8$*8,84*=%&(%47*,8"83%/(&4*9'(*#1

GI%JK6!6MG%E6KLIUE%LMaUKH%;KIN%OVFKQ6K%;FLSUK6-%

T&%8&$%'#*%9,5,3*9%*<'"/5*8$1%%L2%,+8&(5,7%8&"#*%&(%^"+(,$"&8%&44'(#=%

.,^*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1

1. R6;IK6%6FOV%UE6= inspect the general

condition of the charger. Check for:

• loose hardware,

• cracked or broken parts,

• damaged electrical wiring or cable insulation, and

• any other condition that may

affect its safe operation.

2. F;G6K%UE6= wipe external surfaces

of the charger with clean cloth.

3. PFKMLMQb%%L2%$.*%#'//7Y%4&(9%&2%$."#%

4.,(3*(%"#%9,5,3*9=%"$%5'#$%+*%(*/7,4*9%

&87Y%+Y%,%<',7"2"*9%#*(^"4*%$*4.8"4",81%%

TI%MIG%IJ6M%OVFKQ6K%VIUELMQ=%

MI%UE6K?E6K!LO6FRS6%JFKGE%LMELT61

[ABj>%F3&'(,%K&,9%%l%%O,7,+,#,#=%OF%D>m\[%%l%%>?@@@?@AA?BCDC

S"5"$*9%D\%T,Y%P,((,8$Y