Transcripción de documentos

UA CDC-906/506 COMPACT DISC AUTOMATIC CHANGER OWNER’S MANUAL  IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO␣ NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1 2 3 4 5 6 7 8 9 10 11 12 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 13 IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. CAUTION 14 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. CAUTION  Getting Started CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. This unit is designed for home use only. Do not use this unit for business purposes. 2 Install this unit in a well ventilated, cool, dry, and clean place with at least 5 cm above, behind and on the both sides of this unit - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Caution for moving this unit 3 Position this unit away from other electrical appliances, motors and transformers to avoid humming sounds, do not place this unit where it may get exposed to rain or any kind of liquid to prevent fire or electrical shock. 4 Avoid extreme temperature swings or excessive use of humidifier in the room where this unit is installed to prevent condensation inside this unit, which may cause an electrical shock, fire damage to this unit, and/or personal injury. 5 Do not cover this unit with a newspaper, a tablecloth, a curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit and/ or personal injury. 6 Avoid installing this unit in a place where foreign objects and liquid might fall. It might cause a fire, damage to this unit and/ or personal injury. Do not place the following objects on this unit: • Other components, as they may cause damage and/or discoloration on the surface of this unit. • Burning objects (i.e., candles), as they may cause fire, damage to this unit and/or personal injury. • Containers with liquid in them, as they may cause an electrical shock to the user and/or damage to this unit. 7 Be sure to place this unit on a level surface. If not so, this unit will fail to work normally and cause damage to the disc(s) and this unit itself. 8 Do not use force on switches, controls or connection cables. Never pull the cables when disconnecting them. 9 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may result in fire or other accidents. YAMAHA will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified. 10 Do not attempt to clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 11 Disconnect the power cord from the wall outlet when not planning to use this unit for a long period of time, or during an electrical storm, as they may cause damage by lightning. 12 Do not attempt to modify or fix this unit. Contact the qualified YAMAHA service personnel when any service is needed. Cabinet should never be opened for any reasons. 13 Be sure to read ‘Troubleshooting’ section regarding common operating errors before concluding that this unit is faulty. DANGER Visible laser radiation when open. Avoid direct exposure to beam. When this unit is plugged to the wall outlet, do not place your eyes close to the opening of the disc tray and other openings to look into inside. CAUTION • When moving this unit, first remove all discs from the disc table and close the table by pressing the OPEN/CLOSE button, and then switch off the power after you confirm that the front panel display indicates as follows. 2 3 4 5 Never switch off the power if the front panel display is not pictured as above, otherwise the unit will break down during moving because the internal mechanism is not locked. FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES003.  Getting Started ENGLISH Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product. Features ● 5-Discs Carousel Auto-changer GETTING STARTED Introduction ● Full Opening Disc Tray for Changing 5 Discs at a Time PLAYING CDS ● PLAYXCHANGE; Disc Changing Capability while Playing Another ● Repeat, Random and Program Play ● Remote Control Capability Contents FUNCTIONS FOR RECORDING CD Synchronized Recording .............. 16 Track Programming for Recording ...... 17 Supplied Accessories .......................................... 3 Remote Control Transmitter ................................ 3 Connections ........................................................ 4 Automatic Tape Programming ........................... 17 Manual Tape Programming ............................... 18 Random Tape Programming ............................. 20 Controls and Functions .................... 5 Automatic Peak Level Searching ........ 21 PLAYING CDS Basic Operation ............................. 8 ADDITIONAL INFORMATION Troubleshooting ............................ 22 Specifications .............................. 23 Loading and Playing Discs .................................. 8 PLAYXCHANGE ................................................... 9 Scanning Discs ................................................... 9 Skipping Tracks ................................................. 10 Searching .......................................................... 10 CD TEXT ............................................................ 10 ADDITIONAL INFORMATION Front Panel .......................................................... 5 Remote Control Transmitter ................................ 6 Display ................................................................ 7 FUNCTIONS FOR RECORDING GETTING STARTED CD Preventive Cares ....................... 2 Preparations ................................. 3 Various Functions .......................... 11 Random Sequence Play .................................... 11 Program Play .................................................... 12 Repeat Play ....................................................... 14 Index Search ..................................................... 14 Adjusting the Level ............................................ 15 Timer Play ......................................................... 15 English E-1  CD PREVENTIVE CARES • This compact disc player is designed for playing and marks only. compact discs bearing the Never attempt to load any other type of disc into the unit. The unit will also play 8-cm (3-inch) compact discs. • Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect the disc’s play. • Do not use cleaning discs or warped discs. All of these could damage the unit. • Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center. To prevent a malfunction of this unit • Do not use any non standard shaped CD (heart, etc.) available on the market, because it may damage the unit. • Do not use a CD with tape, seals, or paste on it, because damage to the unit may result. • Do not try to clean the disc’s surface by using any type of disc cleaner, record spray, anti-static spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the disc’s surface. • Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc. No! E-2  GETTING STARTED PREPARATIONS Supplied Accessories Remote Control Transmitter SYNCHRO DIMMER OPEN/ CLOSE TEXT/ TIME PEAK CLEAR PROG 1 2 3 4 5 6 0 DISC SCAN REPEAT 8 9 —10 INDEX — 7 MODE — OUTPUT LEVEL — — TAPE Batteries (size AA, UM-3, R6) (2) RCA Pin Cable DISC SKIP RANDOM Remote Control Transmitter ■ Battery installation 1 ■ Remote control transmitter operation range NATURAL SOUND 3 COMPACT DISC PLAYER POWER PLAYXCHANGE DISC PROG 1 2 3 4 +10 6 7 8 9 5 1 PHONES 2 2 3 4 5 OUTPUT LEVEL 0 PEAK Remote control sensor ■ Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Within approximately 6 m (19.7 feet) 30° 30° Notes • Use only AA, R6, UM-3 batteries for replacement. • Be sure the polarities are correct. (See the illustration inside the battery compartment.) • Remove the batteries if the remote control transmitter will not be used for an extended period of time. • If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. Notes • There should be no large obstacles between the remote control transmitter and the main unit. • If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp, etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting. English E-3  PREPARATIONS Connections Never plug in this unit and other components until all connections are completed. • Before making any connections, switch OFF the power to the unit and the amplifier or other components. • Connections should be made to the correct input terminals of the amplifier or other components. • If the placement of this unit causes noise in other equipment, such as a tuner, separate them from each other. LINE OUT R LINE OUT L R L 1 1 OPTICAL DIGITAL AUDIO OUT To AC outlet OPTICAL DIGITAL AUDIO OUT 1 Pin cable (included) 2 Optical fiber cable (not included) L R CD ANALOG IN OPTICAL DIGITAL IN Amplifier Choose one of the ways listed below to connect this unit to your amplifier. When the LINE OUT (analog) terminals of this unit are used (1) • Be sure that the left (L) and right (R) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other components. • Connect the LINE OUT terminals to the “CD” (or “AUX”) terminals of the amplifier. For additional details concerning these connections, refer to the operation instructions for the amplifier being used. • The LINE OUT terminals of this unit are numbered !. When connecting this unit with a YAMAHA amplifier or receiver whose terminals on the rear panel are numbered as !, @, #, etc., connect the LINE OUT terminals of this unit to the input terminals numbered ! on the rear of the amplifier or receiver. When the DIGITAL AUDIO OUT (OPTICAL) terminal of this unit is used (2) • Before using this terminal, remove the terminal’s cover by pulling it. • Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical fiber cable. * Be sure to use a high quality optical fiber cable. Other cables might not function correctly. • Be sure to attach the terminal cover when this terminal is not being used in order to protect the terminal from dust. • CDC-906 only Set the level of signals output into an amplifier to max. by using the OUTPUT LEVEL –/+ buttons. E-4  GETTING STARTED CONTROLS AND FUNCTIONS Front Panel CDC-906 1 2 NATURAL SOUND 3 COMPACT DISC PLAYER POWER PLAYXCHANGE DISC PROG 1 2 3 4 5 1 PHONES +10 6 7 8 9 2 3 4 5 OUTPUT LEVEL 0 PEAK 4 5 6 7 8 9 0 w e q r ty CDC-506 1 2 NATURAL SOUND 3 COMPACT DISC PLAYER POWER PLAYXCHANGE DISC 1 8 2 9 0 3 4 5 w e r ty 1 POWER .......................................................... P.8,9 9 Remote control sensor 2 Disc tray .......................................................... P.8,9 0 DISC-select ....................................................... P.8 3 v (Open/Close) q OUTPUT LEVEL –/+ .................................... P.15 4 PHONES jack ................................................. P.15 w t/e (Skip/Search) 5 PROG ......................................................... P.12,18 e r/y (Skip/Search) 6 Numeric buttons ............................................... P.10 r w/d (Play/Pause) 7 PEAK ......................................................... P.16,21 t a (Stop) 8 Display panel ..................................................... P.7 y PLAYXCHANGE ............................................. P.9 English E-5  CONTROLS AND FUNCTIONS Remote Control Transmitter Parts in the shaded areas are provided for CDC-906 only . 1 DIMMER ........................................................... P.7 2 SYNCHRO ...................................................... P.16 3 TEXT/TIME ....................................................... P.7 1 SYNCHRO DIMMER 4 TAPE ............................................................... P.17 OPEN/ CLOSE 2 r TEXT/ TIME PEAK t 3 TAPE CLEAR PROG y u 4 2 1 3 5 Numeric buttons ............................................... P.10 6 Disc play MODE-select ..................................... P.8 7 DISC SCAN ..................................................... P.9 8 d (Pause) 9 REPEAT .......................................................... P.14 0 w (Play) q t (Skip) 4 5 6 7 8 9 0 —10 INDEX 5 — w a (Stop) e e (Search) r OPEN/CLOSE ................................................. P.8 i — OUTPUT LEVEL o DISC SCAN 7 8 9 0 q w e E-6 y PROG .............................................................. P.12 — — MODE 6 DISC SKIP p REPEAT t PEAK .............................................................. P.21 RANDOM a u CLEAR ............................................................ P.13 i INDEX ............................................................. P.14 o OUTPUT LEVEL –/+ .................................... P.15 p DISC SKIP ....................................................... P.8 a RANDOM ......................................................... P.8 s d s y (Skip) d r (Search)  CONTROLS AND FUNCTIONS The display located in the center of this unit provides information about discs. ■ Selecting time displays and the text data After closing the disc tray by pressing the OPEN/CLOSE button or selecting any disc by using the DISC SKIP buttons when this unit is stopped, the display shows the total number of tracks and the total recorded time of the selected disc for a few seconds. You can select any of the four time displays by pressing the TEXT/TIME display mode-select button. Since this unit is CD TEXT compatible, the disc title, artist name, and track name are also displayed in addition to the time displays when playing a CD with CD TEXT. Each time you press the TEXT/TIME display mode-select button, the display changes as follows. 1 2 3 4 5 12 5DISCS 53:38 1 2 3 4 5 6 7 8 9 10 11 12 1 Elapsed time of the track now playing ■ Display information at disc play 1 2 1 2 3 4 5 1 2 3 4 5 5 5DISCS 3 0:08 3 4 GETTING STARTED Display 3 4 5 6 7 8 9 10 11 12 2 2:35 2 3 4 5 6 7 8 9 10 11 12 2 Remaining time of the track now playing 1 2 3 4 5 6 1 Encloses the tray number of the selected disc. 2 The numbers corresponding to trays that contain discs light up after discs are selected. 3 Shows the selected track number. 4 Shows the time displays. (Refer to “Selecting time displays and the text data” on the right side.) 5 Displays the numbers that correspond to the numbers of the tracks (as high as number 20) on the selected disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance. 6 CDC-906 only Shows the level of signals output into an amplifier or the headphones level adjusted by using the OUTPUT LEVEL –/+ buttons. TEXT/ TIME 5DISCS 2 5DISCS - 1:02 2 3 4 5 6 7 8 9 10 11 12 3 Total disc play time 1 2 3 4 5 TOTAL 5DISCS 38:14 2 3 4 5 6 7 8 9 10 11 12 4 Total remaining time on the disc 1 2 3 4 5 5DISCS TOTAL -32:27 2 3 4 5 6 7 8 9 10 11 12 Disc title ■ Changing brightness of the display If desired, you can change brightness of the display in three degrees by pressing the DIMMER button. Artist name DIMMER Track name when playing back a disc without CD TEXT when playing back a CD TEXT disc Notes English • The remaining time 2 will not be displayed if the track number is 21 or higher. • The disc title, artist names, or track names may not be displayed with some CD TEXT discs. In this case, “NO ENTRY” appears in the display. E-7  Playing CDs BASIC OPERATION This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. 3 OPEN/ CLOSE Loading and Playing Discs NATURAL SOUND • You can also close the disc tray by pressing the w/d button on the front panel, a DISC-select button on the front panel, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the first selected disc. COMPACT DISC PLAYER POWER PLAYXCHANGE DISC PROG 1 2 3 4 +10 6 7 8 9 5 1 PHONES 2 3 4 5 OUTPUT LEVEL 0 PEAK 1 DISC SCAN DISC SKIP REPEAT SYNCHRO DIMMER 4 OPEN/ CLOSE PEAK TAPE CLEAR PROG 1 2 3 4 5 6 7 8 9 0 —10 INDEX — OUTPUT LEVEL 4 2,3 5 1DISC REP RN 5DISCS S F P SEARCH TITLE ARTIST Shows the selected disc mode. “1DISC” mode: The unit will play a designated disc only. “5DISCS” mode: The unit will play all discs on the tray in sequence. — DISC SKIP 5 1 Select a desired disc play mode (1DISC or 5DISCS) confirming it on the display. MODE — MODE DISC SCAN — TEXT/ TIME 5 RANDOM Close the disc tray. Start play from the first track of the disc 1. Turn the power on. POWER On the front panel 2 Open the disc tray and load discs. Use the disc guides to align the discs correctly in the tray. * If necessary, select a desired disc by using the DISC SKIP buttons, or a DISC-select button on the front panel. DISC DISC SKIP or 2 3 4 Label side upward On the front panel OPEN/ CLOSE Play will automatically start. Disc tray To play an 8-cm (3-inch) CD Place it in the inner recessed area of the disc tray. Do not put a normal (12-cm/5-inch) CD on top of an 8-cm CD. E-8  BASIC OPERATION ■ To stop play temporarily or On the front panel To resume play, press the d button again (or press the w button). * The w/d button on the front panel can also be used to stop play temporarily or to resume play. PLAYXCHANGE During play, you can open the disc tray by pressing the PLAYXCHANGE button on the front panel without interrupting disc play. However, in this case, pressing the DISC SKIP buttons has no effect. You can load or replace discs on the trays when the disc tray is opening, however, never load a disc on the tray hidden inside the unit. If doing so, the disc and the unit may be damaged, because the tray already has a disc, which is being played. PLAYING CDS ■ To stop play completely or On the front panel ■ To turn off the power Press the POWER switch again. POWER On the front panel Scanning Discs ■ This mode is convenient to search for a desired disc (or to check discs on the disc tray) When the DISC SCAN button is pressed in stop mode, this unit will play a section of each disc in turn for 8 seconds. If, during this play, you find a disc that you want to listen to, press the DISC SCAN button once again or press the w button to cancel this function. The unit will enter into the normal play mode. DISC SCAN Notes • During this play, the disc tray numbers blink in the display. Every time the play of a disc is finished, the corresponding tray number is changed from flashing to lighting. • If the disc being played has a long blank space between tracks, you will hear no sound during disc scan. English E-9  BASIC OPERATION Skipping Tracks Searching ■ To play from the beginning of the track following the one now playing ■ To go forward rapidly (Press and hold.) ■ To go backward rapidly ■ To play from the beginning of the track now playing (Press and hold.) ■ To play from the beginning of the track before the one now playing (Twice) • These operations can also be performed when the unit is paused or stopped. • When using the t or y button on the remote control transmitter: * If the button is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). • When using the t/e or r/y button on the front panel: * Be careful not to press and hold a button, otherwise the selected track is played forward (or backward) rapidly. ■ DIRECT PLAY Select a desired track by using the numeric buttons. 1 2 3 4 5 2 3 4 5 6 7 8 9 0 —10 — 1 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 11 12 13 14 15 16 17 18 19 5 The selected track number is displayed. Example: To select track 25 Press 0 twice, then immediately press 5 once. * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played. E-10 • The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. • Manual search can also be performed while disc play is paused. In this case, no sound will be heard. • When using the t/e or r/y button on the front panel: * Be careful not to release the button just after it is pressed, otherwise the play is skipped to the beginning of the next track or returned to the beginning of the current track. CD TEXT This unit is compatible with the CD TEXT function. The CD TEXT disc has information, such as the disc title, artist names, and track names. If the current disc is a CD TEXT disc, the unit reads the disc title, artist name, and track names from the disc. You can display the CD TEXT data (see “Selecting time displays and the text data” on page 7).  VARIOUS FUNCTIONS Random Sequence Play You can play the tracks on one or more discs in a random sequence. The unit will automatically mix up tracks from all discs or a designated disc on the disc tray. DISC SCAN REPEAT OPEN/ CLOSE TEXT/ TIME PEAK TAPE CLEAR PROG 1 2 3 4 5 6 9 —10 INDEX OUTPUT LEVEL DISC SKIP RANDOM 4 Notes — 3 DISC SCAN 1 “RNDM” lights up in the display. ■ To cancel random-sequence play — — 8 0 — RANDOM Press the a button or RANDOM button once again, or open the disc tray by pressing the OPEN/CLOSE button. “RNDM” disappears from the display. 7 MODE 1,2 Press the RANDOM button. PLAYING CDS SYNCHRO DIMMER 4 DISC SKIP Load one or more discs. • This feature will not function during programming, or during program play. • If the y button is pressed during random-sequence play, the next randomly programmed track will be played. If the t button is pressed, play will return to the beginning of the track now being played. • This indication appears while the unit is mixing up tracks. OPEN/ CLOSE • Total remaining time on the disc will not be displayed during random-sequence play. 2 Close the disc tray. OPEN/ CLOSE 3 Select a desired disc play mode (1DISC or 5DISCS). MODE * If you select “1DISC” mode, next select a desired disc by using the DISC SKIP buttons on the remote control transmitter or a DISC-select button on the front panel. English E-11  VARIOUS FUNCTIONS Program Play You can enjoy listening to your favorite tracks selected from one or more discs in any desired order by programming tracks. DISC SCAN REPEAT PEAK TAPE CLEAR PROG 1 2 3 4 5 6 8 9 0 —10 INDEX DISC SCAN 1 2 OUTPUT LEVEL 3 4 2,4 On the front panel 7 5 1 3 5 Program a desired track by pressing the corresponding numeric button. 1 2 3 4 5 6 7 8 9 0 —10 — DISC SKIP 6 Repeat steps 4 and 5 to program more tracks. You can select the same track again. 7 When the programming is completed, start playing. Stop the unit. If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP buttons in turn. * Without this operation, the total time of the programmed tracks will not be displayed during programming. Press the PROG button to begin programming. PROG 5 1DISC REP RNDM SAVE BEST EDIT 5DISCS S F PROG CD- TEXT 1 2 SEARCH TITLE ARTIST TRACK 6 7 STEP E-12 2 RANDOM DISC SKIP 3 or — — 7 — DISC DISC SKIP OPEN/ CLOSE TEXT/ TIME MODE If necessary, select a desired disc. 1 11 12 16 17 — SYNCHRO DIMMER DISC SKIP 4  VARIOUS FUNCTIONS ■ Display information during programming 1 2 3 4 5 -- 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 STEP 1 11 12 13 14 15 16 17 18 19 20 2 4 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 STE 3:25 11 12 13 14 15 16 17 18 19 20 3 1 Shows the program number for the track to be programmed next. 2 Shows the selected disc and track number. 3 Shows the total time of the tracks currently programmed. 4 Shows only the numbers of programmed tracks on the selected disc. * If “STEP 1” does not appear on the display after the PROG button is pressed, press the TEXT/TIME display mode-select button. * If the total time exceeds 99 minutes and 59 seconds, the time will not be displayed. Notes • You can program as many as 40 tracks at one time. • You can program a whole disc by pressing “0”, instead of one track. At that time, “ALL” lights up in the display. • The total time of the programmed tracks will not be displayed, if a track number higher than 20 is programmed. • If, during programming, the TEXT/TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks or no information. To return to the previous display, press the TEXT/TIME display mode-select button once again. • The t and y buttons can be used during playing, but only within the range of the programmed tracks. • Pressing a numeric button stops the current program and skips to the beginning of the track of the number pressed. Once that track has finished playing, the previously interrupted program resumes play. • The e and r buttons can be used during playing to search all tracks, including unprogrammed tracks. There are several methods, as described below. • Press the a button or the CLEAR button while the unit is stopped. • Open the disc tray. • Switch off the power. ■ To check program data 1 During program play, press the a button. 2 Press the PROG button. 3 Each time the y button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the t button. PLAYING CDS -6 Press the a button. The first programmed track number will be displayed. To resume play, press the w button. Play will begin from the beginning of the program. ■ To cancel a programmed sequence 1 1 2 3 4 5 ■ To stop program play ■ To correct program data 1 Follow the procedure described in “To check program data”. 2 Display the track number to be corrected by pressing the t or y button. 3 Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. 4 After the correction has been completed, press the PROG button or w button once again. English E-13  VARIOUS FUNCTIONS Repeat Play Index Search You can play any desired track or disc (or a set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. If the disc includes index numbers, play can be started from any desired index number. 1 Select a track which has index numbers. 1 2 3 4 5 6 7 8 9 0 —10 (OFF) 1DISC REP RNDM SA 5DISCS S F PROG C RCH T T E ART ST TRAC 2 — REPEAT Press the INDEX button. INDEX 1DISC REP RNDM SA 5DISCS S F PROG C RCH T T E ART ST TRAC ■ SINGLE REPEAT (REP S) A single track is repeatedly played. * This is also available in the program play mode and the random-sequence play mode. (If the repeat play mode is switched off, the program play mode or the randomsequence play mode will be resumed.) ■ FULL REPEAT (REP F) In the “1DISC” disc play mode: A designated disc is repeatedly played. In the “5DISCS” disc play mode: All discs on the disc tray are repeatedly played. * In the program play mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks on a designated disc (“1DISC”) in the same order, or all randomly sequenced discs and tracks (“5DISCS”) are repeatedly played. E-14 1 2 3 4 5 5 3 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 INDEX 1 11 12 Select the desired index number. 3 1DISC REP RNDM SAVE BEST 5DISCS S F PROG CD- TEXT SEARCH TITLE ARTIST TRACK IDX 3 ■ To cancel the index search function Press the INDEX button. Notes • Not all discs have index numbers. The index system has a method for sub-dividing tracks into smaller divisions (for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. • If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. • For some discs, play may begin slightly prior to the actual designated index point. • If the disc has no encoded index points, play will begin from the start of the selected track.  VARIOUS FUNCTIONS Adjusting the Level Timer Play CDC-906 only CDC-906 only ■ Adjusting the level of signals output into an amplifier, etc. You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc. as you prefer by using the OUTPUT LEVEL –/+ buttons. OUTPUT LEVEL — — OUTPUT LEVEL or On the front panel For optimum sound quality * When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max. * The level of output signals can be checked in the display. CK NATURAL SOUND PLAYING CDS — You can start play at any specified time by connecting a timer (sold separately). Refer also to the instructions for the timer. 1 Select the desired play mode (1DISC or 5DISCS). 2 Press the POWER switch to turn the unit off. 3 Press the POWER switch while pressing the w/d button on the front panel. Shortly thereafter, “TIMER P. ON” appears in the display and the timer play function is on. (When the timer play function is already on, in which case, “TIMER P. OFF” appears in the display and timer play function is off. In this case, repeat the procedure in steps 2 and 3 to set the timer play function to on.) 4 Set the timer to the desired time. When the set time comes, the unit turns on and starts play. COMPACT DISC PLAYER POWER 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PLAYXCHANGE DISC PROG 1 2 3 4 +10 6 7 8 9 5 1 PHONES 0 2 3 4 5 OUTPUT LEVEL PEAK 2,3 3 CDC-906 only ■ When you listen with headphones Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL –/+ buttons. * Note that the use of the OUTPUT LEVEL –/+ buttons will also vary the level of the signal output to an amplifier, etc. PHONES English E-15  Functions for Recording CD SYNCHRONIZED RECORDING 4 1 REPEAT SYNCHRO DIMMER PEAK TAPE CLEAR PROG 1 2 3 5 6 8 9 0 —10 INDEX — 4 5 6 7 8 9 0 —10 Press the w button. 1 RANDOM OUTPUT LEVEL 2 5 Both CD play and tape deck recording begin. * CD play begins a little later than recording. 4 — 6 If you want to stop recording temporarily and restart recording from a desired track, follow steps 3–5 again. — — 4 7 MODE DISC SKIP 3 OPEN/ CLOSE TEXT/ TIME DISC SCAN DISC SKIP 2 or 5 DISC SCAN If desired, select the track to be recorded first. — Using a compatible YAMAHA tape deck, you can synchronize the tape deck to start recording automatically when a CD starts playing. With this function, you can record a CD on tape more easily and precisely. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control transmitter at the same time. ■ To cancel this function DISC SKIP Press the a button. 1 Notes Select a disc. DISC SKIP 2 Load a tape on the tape deck. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) PEAK 3 Press the SYNCHRO button. SYNCHRO This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit blinks. E-16 • To finish or stop recording, press the a button on the tape deck. • Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to pages 12–13 for the programming procedure.) • This function can also be used together with the tapeprogramming function. (Refer to pages 17–20.)  TRACK PROGRAMMING FOR RECORDING This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) You can select any of four tape lengths by pressing the TAPE button. 46 TAPE 60 Automatic Tape Programming SYNCHRO DIMMER PEAK 5 TAPE CLEAR PROG 1 1 2 3 4 5 6 7 8 9 0 ——10 INDEX — DISC SCAN 2 2 RANDOM TEXT/ TIME MODE 1 4 REPEAT OUTPUT LEVEL 4 6 4 1 2 64 Press the REPEAT button. REPEAT The unit automatically programs tracks for side A and side B separately considering the tape’s total time. * The programmed track numbers and the total number of tracks for side A and B are displayed for a short time. —— DISC SKIP Stop the unit. Select the disc. 5 Begin recording on the tape deck and press the w button at the same time. 6 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the w or d button. FUNCTIONS FOR RECORDING 3 OPEN/ CLOSE DISC SKIP 90 You can also enter the tape’s total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) The unit will automatically program tracks on a disc with the original order of tracks unchanged. DISC SCAN (OFF) 54 DISC SKIP Notes 3 Enter the tape’s total possible recording time (tape length). TAPE 46 • It is recommended that you use a tape that is slightly longer in length than the CD you are recording, because the programmed tracks on a CD may not fit properly into the time allowed on each half of the tape. • CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 5 and 6, press the SYNCHRO button and then press the w button. Recording automatically begins. (For details, refer to page 16.) English E-17  TRACK PROGRAMMING FOR RECORDING ■ Display information during programming 3 1 2 3 4 5 5 Manual Tape Programming With this function, you can program tracks from one or more discs in any order to be recorded onto tape. 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 20:00 2 1 Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. 2 Shows the total time of programmed tracks for each side. 3 Shows the programmed track numbers for each side. 8 OPEN/ CLOSE TEXT/ TIME PEAK TAPE CLEAR PROG 1 2 3 4 5 6 7 8 9 ——10 INDEX 1 4 0 MODE DISC SCAN — 2,5 RANDOM REPEAT SYNCHRO DIMMER 1 DISC SKIP DISC SCAN 11 12 13 14 15 16 17 18 19 20 OUTPUT LEVEL 6 —— DISC SKIP 1 Stop the unit. 2 If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP buttons in turn. * This unit will read the contents of a disc by this operation. If there is a disc to which this operation is omitted, tracks on the disc cannot be programmed. 3 4 Follow step 3 on page 17. PROG 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 H TITLE ARTIST TRACK 6 7 8 9 2A-01 5 If necessary, select a desired disc by pressing the DISC SKIP buttons. 6 Select a desired track. 7 E-18 11 12 13 14 16 17 18 19 2 3 4 5 6 7 8 9 0 —10 — 1 Repeat steps 5 and 6 to program more tracks for side A of the tape. You can select the same track again. * If “ERROR” appears in the display, the track number just selected cannot be programmed because there is no enough time remaining on side A of the tape.  TRACK PROGRAMMING FOR RECORDING 8 When you finish the programming for side A, program the pause mode by pressing the TAPE button. TAPE ■ Display information during programming 1 2 3 4 5 -- 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 A- 1 11 12 13 14 15 16 17 18 19 20 1 * “PAUSE” lights up in the display, and after then you can begin programming for side B. 9 Repeat steps 5 and 6 to program more tracks for side B of the tape. You can select the same track again. * If “ERROR” appears in the display, the track number just selected cannot be programmed because there is no enough time remaining on side B of the tape. Start recording on the tape deck and press the w button at the same time. Notes • In steps 7 and 9, even if “ERROR” appears in the display, you can program another track of which time is shorter than the remaining time on the side of the tape. At this time, if any other track number lights up in the display, you can program it. • CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in steps 10 and 11, press the SYNCHRO button and then press the w button. Recording automatically begins. (For details, refer to page 16.) 1 2 3 4 5 -4 4 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 - 8:28 11 12 13 14 15 16 17 18 19 20 3 1 Shows the side of the tape and the program number for the track to be programmed next. 2 Shows the selected disc and track number. 3 Shows the total remaining time on the side of the tape. 4 Programmed track numbers light up and programmable track numbers among the unprogrammed ones blink. * If “A-1” does not appear in the display after the PROG button is pressed, press the TEXT/TIME display modeselect button. * If, during programming, the TEXT/TIME display modeselect button is pressed, the program number display can be changed to display the total remaining time on the side of the tape. To return to the previous display, press the TEXT/TIME display mode-select button once again. FUNCTIONS FOR RECORDING The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the w or d button. 2 Notes on tape programming • To check, cancel or correct program data, refer to page 13. • The maximum number of tracks that can be programmed is 40. If, however, the PAUSE mode is inserted, it is counted as one track. • This function can be used to program up to track number 20. If the disc has more than 20 tracks, tracks with track number 21 and higher cannot be programmed. English E-19  TRACK PROGRAMMING FOR RECORDING Random Tape Programming The unit will automatically program tracks on a disc in random sequential order for recording to tape. DISC SCAN REPEAT DISC SKIP RANDOM 2 3 Notes • Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly. • It is recommended that you use a tape that is slightly longer in length than the CD you are recording, because the programmed tracks on a CD may not fit properly into the time allowed on each half of the tape. • CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in steps 3 and 4, press the SYNCHRO button and then press the w button. Recording automatically begins. (For details, refer to page 16.) Display information during programming 3 1 2 3 4 5 PROG 1 3 5 7 4 1 2 Follow steps 1 – 3 on page 17. Press the RANDOM button. RANDOM The unit will automatically program tracks for side A and side B separately considering the tape’s total time. * The programmed track numbers and the total number of tracks for side A and B are displayed for a short time. 3 Start recording on the tape deck and press the w button at the same time. 4 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the w or d button. E-20 1 13:00 2 1 Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. 2 Shows the total time of programmed tracks for each side. 3 Shows the programmed track numbers for each side.  AUTOMATIC PEAK LEVEL SEARCHING This convenient feature automatically searches a disc for a part where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck. DISC SCAN REPEAT SYNCHRO DIMMER CLEAR PROG 1 2 3 4 5 6 7 8 9 —10 INDEX — 3 RANDOM OUTPUT LEVEL 4 1 2 3 4 5 1 The peak level search is performed on the disc. 1 2 3 4 5 — 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 P8AK 0:44 11 12 13 14 15 16 17 18 19 20 DISC SKIP Stop the unit. PEAK 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 00:44 11 12 13 14 15 16 17 18 19 20 Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this repeat play. 2 Select the “1DISC” disc play mode. MODE 4 5 1DISC REP RNDM SAVE BES S F PROG CD- TEX SEARCH TITLE ARTIST TRACK ■ To cancel this function FUNCTIONS FOR RECORDING 1 2 3 4 5 1 11 12 13 14 15 16 17 18 19 20 PEAK 2 DISC SCAN 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 — — PEAK TAPE 0 PEAK OPEN/ CLOSE TEXT/ TIME MODE DISC SKIP 4 Press the PEAK button. Press the a button. Notes 3 Select the disc. DISC SKIP • Even if the peak level search is performed twice or more on the same disc, the same part will not be always selected, because this unit will search for the peak level among parts on the disc that are randomly selected by the internal microcomputer. • In the program play mode, this feature will function among the programmed tracks only. If program play is being performed, first press the a button, and then press the PEAK button. If program play is not being performed, only press the PEAK button. • To search for the peak level through all discs on the disc tray, in step 2, select the “5DISCS” disc play mode. English E-21  Additional Information TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit’s power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM This unit does not switch ON when the POWER switch is pressed. This unit does not work normally. The disc tray does not close completely. A disc number does not light up on the display. PROBABLE CAUSE The power cord is not connected or not completely connected. There is an influence of strong external noise (lightning, excessive static electricity, etc.) or a misoperation was performed while using this unit. A foreign object is obstructing the tray. The disc has been loaded upside down. The disc is damaged. There is moisture on the laser pickup. Play does not begin. Play is delayed, or begins at the wrong place. No sound. The disc is damaged. The disc has been loaded upside down. The disc is dirty. The disc may be scratched or damaged. Improper output cable connections. Improper amplifier operation. Sound “skips”. Sound “hums”. Noise from a nearby tuner. Noise from inside of the disc tray. The remote control transmitter does not work. E-22 This unit is being subjected to vibrations or impacts. The disc is dirty. Improper cable connections. The tuner is too close to this unit. The disc may be warped. The batteries of this remote control transmitter are too weak. Direct sunlight or lighting (of an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of the main unit. REMEDY Securely connect the power cord. Turn off and disconnect the AC power from the AC outlet. After about 30 seconds, connect the power and try again. Carefully check the disc tray and remove the foreign object. Reload the disc with the label side up. Check the disc carefully; replace it if necessary. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. Check the disc carefully; replace it if necessary. Reload the disc with the label side up. Clean the disc. Check the disc carefully; replace it if necessary. Connect the cables properly. If the problem persists, the cables may be defective. Set the amplifier controls to the correct input selection. Relocate this unit. Clean the disc. Securely connect the audio cables. If the problem persists, the cables may be defective. Move the tuner and this unit farther apart. Replace the disc. Replace the batteries with new ones. Change position of the main unit.  SPECIFICATIONS Audio Section General Frequency response ......................... 2 Hz – 20 kHz, ±0.5 dB Power requirements U.S.A. and Canada models .......................... 120 V, 60 Hz Australia model ........................................... 240 V, 50 Hz Harmonic distortion+noise (1 kHz) ........................... 0.003% S/N ratio .................................................................... 106 dB Dynamic range ............................................................. 96 dB Output level (1 kHz, 0 dB) .................................... 2.0±0.5 V Headphones output (–20 dB) ............ 200±40 mV/150 ohms (CDC-906 only) Laser Diode Properties Material .................................................................... GaAlAs Wavelength ................................................................ 780 nm Emission Duration ................................................ continuous Laser Output .................................................. max. 44.6µW* * This output is the value measured at a distance of about 200mm from the objective lens surface on the Optical Pick-up Block. Power consumption ...................................................... 12 W Dimensions (W x H x D) ...................... 435 x 116 x 404 mm (17-1/8” x 4-9/16” x 15-7/8”) Weight ............................................... 5.85 kg (12 lbs. 12 oz.) Accessories .................................................... RCA pin cable Remote control transmitter Batteries (size AA, R6, UM-3) (2) Please note that all specifications are subject to change without notice. ADDITIONAL INFORMATION English E-23  Getting Started YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed in Malaysia V673850