Transcripción de documentos

A Support and Documentation Notice Package Contents Hardware Review All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior notification by the manufacturer. To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/ 1 UH3233 USB-C Dual-HDMI Mini Dock 1 USB-C to USB-C Cable 1 User Instructions 1 B Top View Technical Support www.aten.com/support Installation 1 UH3233 Scan for more information EMC Information Front View USB-C Dual-HDMI Mini Dock Quick Start Guide FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna; - Increase the separation between the equipment and receiver; - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; - Consult the dealer/an experienced radio/television technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 2 HDMI HDMI Rear View © Copyright 2017 ATEN® International Co., Ltd. HDMI HDMI ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners. 3 This product is RoHS compliant. Part No. PAPE-1223-K40G 4 5 2 Printing Date: 10/2017 3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 4 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에 서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다. UH3233 USB-C Dual-HDMI Mini Dock Hardware Review A www.aten.com 2. For Dual-View to work, the computer’s onboard graphics 1 Power LED module or video source requires DisplayPort 1.2 with 2 USB 3.1 Gen 1 Type-C Port MST+HBR2 compatibility to support video output under 3 USB 3.1 Gen 1 Type-A Port extended mode. 4 HDMI Port 1 5 HDMI Port 2 Hardware Installation To setup the UH3233, do the following: 1 3. Mac computers do not include MST technology; therefore Mac computers will not support Dual-View mode. connect a computer's USB-C port to the UH3233.* Note: The UH3233's power LED will light blue to confirm the orange LED indicates that the computer connected via connection is good. • Windows® 10 3 Connect an HDMI cable from a monitor to the HDMI 1 port. • Mac OS 10.12 4 Connect a second HDMI cable from a monitor to the Software Requirements orange, connect an AC adapter to the USB device connected to the USB 3. 1 Gen 1 Type-A port. The Connect a USB 2.0/3.0 device (keyboard/mouse/peripheral/ • A USB Type-C or Thunderbolt™ 3 USB Type-C compatible Note: If the UH3233's power LED changes from blue to Use the USB-C to USB-C cable (included with the package) to 2 Hardware Requirements computer* B the USB-C cable cannot provide sufficient power to the USB device. adapter) to the USB 3. 1 Gen 1 Type-A port. • Two HDMI monitors HDMI 2 port. *1. For video output to work through a USB-C port, it must support DP Alt Mode. UH3233 Mini Dock USB-C double HDMI A Présentation du matériel www.aten.com 2. Pour que Dual-View fonctionne, le module graphique 1 LED d'alimentation embarqué de l'ordinateur ou la source vidéo nécessite 2 Port USB 3.1 Gen 1 Type-C DisplayPort 1.2 avec compatibilité MST+HBR2 pour prendre en 3 Port USB 3.1 Gen 1 Type-A charge la sortie vidéo en mode étendu. 4 Port HDMI 1 3. Les ordinateurs Mac ne comportent pas la technologie MST; Port HDMI 2 par conséquent, les ordinateurs Mac ne prendront pas en 5 charge le mode Dual-View. B Pour configurer l'UH3233, procédez comme suit : 1 Type-C* • Deux moniteurs HDMI Remarque: Si la LED d'alimentation de l'UH3233 passe du bleu à l'orange, connectez un adaptateur Utilisez le câble USB-C vers USB-C (inclus dans l'emballage) secteur au périphérique USB connecté à l'USB pour connecter le port USB-C d'un ordinateur à l'UH3233.* Remarque: La LED d'alimentation de l'UH3233 s'allume en 3. 1 port Gen 1 Type-A La LED orange indique bleu pour confirmer que la connexion est bonne. 2 Configuration matérielle requise • Un ordinateur compatible USB Type-C ou Thunderbolt™ 3 USB Installation du matériel Connectez un périphérique USB 2.0/3.0 (clavier/souris/ que l'ordinateur connecté via le câble USB-C ne peut pas fournir une alimentation suffisante au périphérique USB. périphérique/adaptateur) à l'USB 3. 1 port Gen 1 Type-A Configuration logicielle requise 3 Connectez un câble HDMI d'un moniteur au port HDMI 1. • Windows® 10 4 Connectez un second câble HDMI d'un moniteur au port • Mac OS 10.12 HDMI 2. *1. Pour que la sortie vidéo fonctionne via un port USB-C, elle doit prendre en charge le mode DP Alt. UH3233 USB-C Dual-HDMI Mini Dock A 1 Hardware Übersicht www.aten.com 2. Damit Dual-Anzeige funktioniert, benötigt das Onboard- Netz-LED Grafikmodul oder die Videoquelle des Computers USB 3.1 Gen 1 Typ-C Port DisplayPort 1.2 mit MST+HBR2 Kompatibilität, um die 3 USB 3.1 Gen 1 Typ-A Port Videoausgabe im erweiterten Modus zu unterstützen. 4 HDMI Port 1 5 HDMI Port 2 2 B Hardwareinstallation Um den UH3233 einzurichten, gehen Sie wie folgt vor: 1 3. Mac-Computer enthalten keine MST-Technologie; daher unterstützen Mac Computer keinen Dual-Anzeige Modus. Softwareanforderungen • A USB Type-C or Thunderbolt™ 3 USB Type-C compatible • Windows® 10 computer* • Mac OS 10.12 2 orange wechselt, schließen Sie ein Netzteil an das Verwenden Sie das (im Lieferumfang enthaltene) USB-C auf USB-Gerät an, das an USB 3 angeschlossen ist. 1 USB-C-Kabel, um den USB-C Port eines Computers mit dem Gen 1 Typ-A Port. Die orangefarbene LED zeigt an, UH3233 zu verbinden.* Hinweis: Die Netz-LED des UH3233 leuchtet blau, um die dass der über das USB-C Kabel angeschlossene Verbindung zu bestätigen. Hardwareanforderungen Hinweis: Wenn die Netz-LED des UH3233 von blau auf Computer nicht genügend Strom für das USB-Gerät liefern kann. Schließen Sie ein USB 2.0/3.0-Gerät (Tastatur/Maus/ Peripheriegerät/Adapter) an das USB 3 an. 1 Gen 1 Typ-A Port. 3 • Zwei HDMI Monitore Schließen Sie ein HDMI-Kabel von einem Monitor an den HDMI 1 Port an. *1. Damit die Videoausgabe über einen USB-C Port funktioniert, 4 muss der DP Alt Modus unterstützt werden. Schließen Sie ein zweites HDMI-Kabel von einem Monitor an den HDMI 2 Port an. Mini soporte Dual-HDMI UH3233 USB-C A Revisión del hardware www.aten.com 2. Para que Dual-View funcione, los gráficos del módulo del 1 LED de alimentación ordenador o la fuente de vídeo deben tener DisplayPort 1.2 2 Puerto USB 3.1 Gen 1 Type-C con compatibilidad MST+HBR2 para soportar la salida de vídeo 3 Puerto USB 3.1 Gen 1 Type-A 4 Puerto HDMI 1 5 Puerto HDMI 2 B Instalación del hardware Para configurar el UH3233, haga lo siguiente: 1 en modo extendido. 3. Los ordenadores Mac no incluyen la tecnología MST; por lo tanto, los ordenadores Mac no soportan el modo Dual-View. a naranja, conecte un adaptador AC al dispositivo USB Utilice el cable USB-C a USB-C (incluido en el paquete) para conectado al puerto 3. 1 Gen 1 Type-A. El LED naranja conectar un puerto USB-C del ordenador al UH3233.* Nota: El LED de alimentación del UH3233 se encenderá en indica que el ordenador conectado con el cable USB-C no puede ofrecer energía suficiente al dispositivo USB. azul para confirmar que la conexión es buena. 2 Conecte un dispositivo USB 2.0/3.0 (teclado/ratón/periférico/ Requisitos de hardware Requisitos del software • Un ordenador compatible con USB Type-C o USB Thunderbolt™ • Windows® 10 3 Conecte un cable HDMI de un monitor al puerto HDMI 1. • Mac OS 10.12 4 Conecte un segundo cable HDMI de un monitor al puerto 3 Type-C* Nota: Si el LED de alimentación del UH3233 cambia de azul adaptador) al puerto USB 3. 1 Gen 1 Type-A. • Dos monitores HDMI HDMI 2. *1. Para que la salida de vídeo funcione con un puerto USB-C, debe soportar el modo DP Alt. UH3233 USB-C Dual-HDMI Mini Dock A Revisione Hardware www.aten.com 2. Affinché Dual-View funzioni, il modulo grafico integrato o LED accensione la sorgente video del computer richiede DisplayPort 1.2 con 2 USB 3.1 Gen 1 Porta Tipo-C compatibilità MST+HBR2 per supportare l' uscita video in 3 USB 3.1 Gen 1 Porta Tipo-A modalità estesa. 4 HDMI Porta 1 3. I computer Mac non includono la tecnologia MST; pertanto, HDMI Porta 2 i computer Mac non supportano la modalità Dual-View. 1 5 B Installazione dell'hardware Per configurare l’unità UH3233 procedere come segue: 1 Requisiti Software • Un computer compatibile USB Tipo-C o Thunderbolt™ 3 USB • Windows® 10 Tipo-C* • Due monitor HDMI *1. Affinché l' uscita video possa funzionare attraverso una porta USB-C, deve supportare la modalità DP Alt. • Mac OS 10.12 2 a arancione, collegare un adattatore CA al dispositivo Utilizzare il cavo da USB-C a USB-C (incluso nella confezione) USB collegato all' USB 3. 1 porta Gen 1 Tipo-A. Il LED per collegare la porta USB-C di un computer alla porta USB-C arancione indica che il computer collegato tramite il del UH3233. * Nota: Il LED di alimentazione dell’unità UH3233 si accenderà cavo USB-C non è in grado di fornire alimentazione in blu per confermare che la connessione è buona. Requisiti Hardware Nota: Se il LED di alimentazione dell’UH3233 cambia da blu Collegare un dispositivo USB 2.0/3.0 (tastiera/tmouse/periferica/ adattatore) all'USB 3. 1 porta Gen 1 Tipo-A. 3 Collegare un cavo HDMI da un monitor alla porta HDMI 1. 4 Collegare un secondo cavo HDMI da un monitor alla porta HDMI 2. sufficiente al dispositivo USB.