PowerWasher MSV2200-S Manual de usuario

Marca: PowerWasher

Modelo: MSV2200-S

Categoría: Limpiadores de alta presión

Tipo: Manual de usuario

Este manual también es adecuado para

OPERATOR’S MANUAL

Record all information and attach sales receipt

here for future reference.

Purchase Date:

Serial Number:

Visit us at www.power-washer.us to register

your warranty, ﬁ nd replacement parts, and talk

with our service representatives about your

pressure washer.

Table of Contents

Safety Guidelines / Deﬁ nitions 2

Important Safety Instructions 2-7

Speciﬁ cations 7

Carton Contents 8

Assembly Instructions 8-9

Operating Instructions 9-13

Maintenance 14

Storage 15

Repairs 15

Accessories 16

Trouble Shooting Guide 16-17

Warranty 18-19

IMPORTANT

Please make certain that the person who is to use this equipment carefully reads and understands

these instructions before operating.

REV. 1 5/10

Pressure Washer

Model MSV2200

2200

2.1

Indicates an potentially hazard

ous situation which, if not avoid-

ed, may result in minor or moderate injury.

Used without the safety alert

symbol indicates a potentially

hazardous situation which, if not avoided, may

result in property damage.

Indicates an potentially hazard

ous situation which, if not avoid-

ed, could result in death or serious injury.

This manual contains information that is important for you to know and understand. This informa-

tion relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you

recognize this information, we use the symbols below. Please read the manual and pay attention to

these symbols.

SAFETY GUIDELINES - DEFINITIONS

Indicates an imminently hazard-

ous situation which, if not avoid-

ed, will result in death or serious injury.

CONSUMER SAFETY INFORMATION

This product may not be equipped with a spark arresting mufﬂ er. If the product is not equipped and

will be used around ﬂ ammable materials, or on land covered with materials such as agricultural

crops, forest, brush, grass, or other similar items, then an approved spark arrester must be installed

and is legally required in the State of California. It is a violation of California statues section 130050

and/or sections 4442 and 4443 of the California Public Resources Code, unless the engine is

equipped with a spark arrester, as deﬁ ned in section 4442, and maintained in effective working order.

Spark arresters are also required on some U.S. Forest Service land and may also be legally required

under other statutes and ordinances.

This product contains chemicals, known to the State of California, to cause cancer, and birth defects

or other reproductive harm. Wash hands after handling.

IMPORTANT SAFETY INSTRUCTIONS

Do not operate this unit until you have read and understand this Operators Manual and the Engine

Owners Manual for Safety, Operation, and Maintenance Instructions.

READ AND SAVE THESE INSTRUCTIONS

Spilled gasoline and its vapors can become

ignited from cigarette sparks, electrical arcing,

exhaust gases and hot engine components

such as the mufﬂ er.

RISK OF EXPLOSION OR FIRE

WHAT CAN HAPPEN

HOW TO PREVENT IT

Shut off engine and allow it to cool before add-

ing fuel to the tank.

Use care in ﬁ lling tank to avoid spilling fuel.

Move pressure washer away from fueling area

before starting engine.

•

Heat will expand fuel in the tank which could

result in spillage and possible ﬁ re explosion.

WHAT CAN HAPPEN

HOW TO PREVENT IT

Fill tank to 1/2” (12.7mm) below bottom of ﬁ ller

neck to provide space for fuel expansion.

•

Operating the pressure washer in an explosive

environment could result in a ﬁ re.

Operate and fuel equipment in well-ventilated

areas free from obstructions. Equip areas with

ﬁ re extinguishers suitable for gasoline ﬁ res.

•

Materials placed against or near the pressure

washer can interfere with its proper ventilation

features causing overheating and possible igni-

tion of the materials.

Never operate pressure washer in an area con-

taining dry brush or weeds.

•

Mufﬂ er exhaust heat can damage painted sur-

faces, melt any material sensitive to heat (such

as siding, plastic, rubber, vinyl, or the high

pressure hose) and damage live plants.

Always keep pressure washer a minimum of 4’

(1.2m) away from surfaces (such as houses,

automobiles, or live plants) that could be dam-

aged from mufﬂ er exhaust heat.

•

Improperly stored fuel could lead to accidental

ignition. Fuel improperly secured could get

into the hands of children or other unqualiﬁ ed

persons.

Store fuel in an OSHA-approved container, in a

secure location away from your work area.

•

Use of acids, toxic or corrosive chemicals,

poisons, insecticides, or any kind of ﬂ ammable

solvent with this product could result in serious

injury or death.

Do not spray ﬂ ammable liquids.

•

RISK TO BREATHING (Asphyxiation)

WHAT CAN HAPPEN

HOW TO PREVENT IT

Breathing exhaust fumes will cause serious in-

jury or death! Engine exhaust contains carbon

monoxide, an odorless and deadly gas.

Operate pressure washer in a well ventilated

area. Avoid enclosed areas such as garages,

basements, etc.

Never operate unit in a location occupied by

humans or animals.

•

Some cleaning ﬂ uids contain substances which

could cause injury to skin, eyes, or lungs.

Use only cleaning ﬂ uids speciﬁ cally recom-

mended for high-pressure washers. Follow

manufacturers recommendations. Do not use

chlorine bleach or any other corrosive com-

pound.

•

RISK OF FLUID INJECTION AND LACERATION

WHAT CAN HAPPEN

HOW TO PREVENT IT

Your pressure washer operates at ﬂ uid pres-

sures and velocities high enough to penetrate

human and animal ﬂ esh, which could result

in amputation or other serious injury. Leaks

caused by loose ﬁ ttings or worn or damaged

hoses can result in injection injuries. DO NOT

TREAT FLUID INJECTION AS A SIMPLE

CUT! See a physician immediately.

Inspect the high-pressure hose regularly. Re-

place the hose immediately if it is damaged,

worn, has melted from contacting the engine,

or shows any signs of cracks, bubbles, pin-

holes, or other leakage. Never grasp a high-

pressure hose that is leaking or damaged.

Never touch, grasp, or attempt to cover a

pinhole or similar water leak on the high pres-

sure hose. The stream of water IS under high

pressure and WILL penetrate skin.

Never place hands in front of nozzle.

Direct spray away from self and others.

Make sure hose and ﬁ ttings are tightened and

in good condition. Never hold onto the hose or

ﬁ ttings during operation.

Do not allow the high pressure hose to contact

the mufﬂ er.

Never attach or remove wand or hose ﬁ ttings

while system is pressurized - squeeze trigger

gun (when engine is off) to relieve pressure in

the system.

•

Injuries can result if system pressure is not

reduced before attempting maintenance or

disassembly.

To relieve system pressure, shut off engine,

turn off water supply and pull gun trigger until

water stops ﬂ owing.

Use only hoses and accessories rated for pres-

sure higher than your pressure washer’s PSI.

•

RISK OF INJURY FROM SPRAY

WHAT CAN HAPPEN

HOW TO PREVENT IT

High velocity ﬂ uid spray can cause objects to

break, propelling particles at high speed.

Light or unsecured objects can become haz-

ardous projectiles.

Always wear ANSI-approved Z87.1 safety

glasses. Wear protective clothing to protect

against accidental spraying.

Never point wand at, or spray people or ani-

mals.

Always secure trigger lock when wand is not in

service to prevent accidental operation.

Never permanently secure trigger in pull-back

(open) position.

•

RISK OF UNSAFE OPERATION

WHAT CAN HAPPEN

HOW TO PREVENT IT

Unsafe operation of your pressure washer

could lead to serious death to you or others.

Do not use chlorine bleach or any other corro-

sive compound.

Become familiar with the operation and con-

trols of the pressure washer.

Keep operating area clear of all persons, pets,

and obstacles.

Do not operate the product when fatigued or

under the inﬂ uence of alcohol or drugs. Stay

alert at all times.

Never defeat the safety features of this product.

Do not operate machine with missing, broken,

or unauthorized parts.

Never leave wand unattended while unit is run-

ning.

•

If proper starting procedure is not followed,

engine can kickback causing serious hand and

arm injury.

If engine does not start after two pulls, squeeze

trigger of gun to relieve pump pressure. Pull

starter cord slowly until resistance is felt. Then

pull cord rapidly to avoid kickback and prevent

hand or arm injury.

•

The spray gun/wand is a powerful tool that

could look like a toy to a child

Keep children away from the pressure washer

at all times.

•

Reactive force of spray will cause gun/wand to

kickback, and could cause the operator to slip

and fall or misdirect the spray. Improper control

of gun/wand can result in injuries to self and

others.

Do not overreach or stand on an unstable sup-

port.

Do not use pressure washer while standing on

a ladder.

Grip gun/wand ﬁ rmly with both hands. Expect

the gun to kickback when triggered

•

RISK OF INJURY OR PROPERTY DAMAGE WHEN

TRANSPORTING OR STORING

WHAT CAN HAPPEN HOW TO PREVENT IT

Fuel or oil can leak or spill and could result

in ﬁ re or breathing hazard. Serious injury or

death can result. Fuel or oil leaks will damage

carpet, paint, or other surfaces in vehicles or

trailers.

If the pressure washer is equipped with a fuel

shut-off valve, turn the valve to the OFF posi-

tion before transporting to avoid fuel leaks. If

the pressure washer is not equipped with a

fuel shut-off valve, drain the fuel from the tank

before transporting. Only transport fuel in an

OSHA-approved container. Always place pres-

sure washer on a protective mat when trans-

porting to protect against damage to vehicle

from leaks. Remove pressure washer from

vehicle immediately upon arrival at your desti-

nation.

•

RISK OF BURSTING

WHAT CAN HAPPEN

HOW TO PREVENT IT

Over inﬂ ation of tires could result in serious

injury and property damage.

Use a tire pressure gauge to check the tires

pressure before each use and while inﬂ ating

tires

See the tire sidewall for the correct tire pres-

sure.

NOTE: Air tanks, compressors, and similar

equipment used to inﬂ ate tires can ﬁ ll small

tires similar to these very rapidly. Adjust pres-

sure regulator on air supply to no more than

the rating of the tire pressure. Add air in small

increments and frequently use the tire gauge to

prevent over inﬂ ation.

•

RISK OF HOT SURFACES

WHAT CAN HAPPEN

HOW TO PREVENT IT

Contact with hot surfaces, such as engine

exhaust components, could result in serious

injury.

During operation, touch only the control sur-

faces of the pressure washer. Keep children

away from the pressure washer at all times.

They may not be able to recognize the hazards

of this product.

•

High velocity ﬂ uid spray directed at pneumatic

tire sidewalls (such as found on automobiles,

trailers, and the like) could damage the side-

wall resulting in serious injury.

On pressure washers rated above 1600 PSI

(110 Bar) use the widest fan spray (40º nozzle)

and keep spray a minimum of 8” (20cm) from

the pneumatic tire sidewall. Do not aim spray

directly at the joint between the tire and rim.

••

•

RISK OF CHEMICAL BURN

WHAT CAN HAPPEN

HOW TO PREVENT IT

Use of acids, toxic or corrosive chemicals,

poisons, insecticides, or any kind of ﬂ ammable

solvent with the product could result in injury or

death.

Do not use acids, gasoline, kerosene, or any

other ﬂ ammable material in this product. Use

only household detergents, cleaners, and

degreasers recommended for use in pressure

washers.

Wear protective clothing to protect eyes and

skin from contact with sprayed materials.

•

RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN

HOW TO PREVENT IT

Spray directed at electrical outlets or switches,

or objects connected to an electrical circuit,

could result in a fatal electrical shock.

Unplug any electrically operated product before

attempting to clean it. Direct spray away from

electric outlets and switches.

•

RISK OF INJURY FROM LIFTING

WHAT CAN HAPPEN

HOW TO PREVENT IT

Serious injury can result from attempting to lift

too heavy an object.

The pressure washer is too heavy to be lifted

by one person. Obtain assistance from others

before lifting.

•

READ AND SAVE THESE INSTRUCTIONS

SPECIFICATIONS

Model MSV2200

Max Pressure* 2200 PSI

Max Flow* 2.1 GPM

* Water ﬂ ow and maximum pressure ratings determined in accordance with PWMA standard PW101.

NOTE: Photographs and line drawings used in this manual are for reference only and do not repre-

sent a speciﬁ c model.

CARTON CONTENTS

ASSEMBLY INSTRUCTIONS

1) Locate and remove all loose parts from the carton.

2) Cut the four corners of the carton from top to bottom and lay the panels ﬂ at.

3) Place the handle onto the frame, depress the snap buttons, and slide the handle assembly down

on the frame until snap buttons snap into place.

Risk of Personal Injury. Avoid placing hands between the handle

and frame when assembling to prevent pinching.

4) Connect Gun to Wand. Tighten Securely.

5) Attach high pressure hose to gun. Tighten securely.

6) Remove the colored quick connect nozzled from plastic bag and insert them into grommets on the

nozzle holder.

OPERATING INSTRUCTIONS

NOTE: The pump on this unit is maintenance free and requires no oil. If there is a problem with the

pump, contact our Customer Service Group on www.power-washer.us as soon as possible.

Risk of bursting. Use a tire pressure gauge to check the tire pressure before each use

and while inﬂ ating tires; see the tire sidewall for the correct tire pressure.

NOTE: Air tanks, compressors, and similar equipment used to inﬂ ate tires can ﬁ ll small tires similar to

these very rapidly. Adjust pressure regulator on air supply to no more than the rating of the tire pres-

sure. Add air in small increments and frequently use the tire gauge to prevent over inﬂ ation.

Compare the illustrations with your unit to familiarize yourself with the location of various controls and

adjustments. Save this manual for future reference.

BASIC ELEMENTS OF A PRESSURE WASHER

High Pressure Pump: Increases the pressure of the water supply.

Engine: Drives the high pressure pump. Refer to the engine manual for location and operation of

engine controls

High Pressure Hose: Carries the pressurized water from the pump to the gun and spray wand.

Spray Gun: Connects the spray wand to control water ﬂ ow rate, direction, and pressure.

Quick Connect Spray Wand: Allows the user to quickly change the spray pattern. See next sections

for more details on your speciﬁ c Spray Wand included with your machine.

Chemical Hose: Feeds cleaning agents into the pump to mix with the water. See How to Apply

Chemicals / Cleaning Solvents instructions.

High Pressure Pump

Engine

Spray Gun

High Pressure Hose

Chemical Hose

Quick Connect Spray Wand

BASIC ELEMENTS OF AN ENGINE

Refer to the engine manual for location and operation of engine controls.

Choke Control: Opens and closes carburetor choke valve.

Starter Grip: Pulling starter grip operates recoil starter to crank engine.

Engine Switch: Enables and disables ignition system.

PRESSURE WASHER TERMINOLOGY

PSI: Pounds per Square Inch. The unit of measure for water pressure. Also used for air pressure,

hydraulic pressure, etc. Sometimes noted as “Bar”, another unit of measure.

GPM: Gallons per Minute. The unit of measure for the ﬂ ow rate of water. Sometimes noted as L/min

(Liters per Minute).

CU: Cleaning Units. GPM multiplied by PSI equals CU.

Bypass Mode: Allows water to re-circulate within the pump when the gun trigger is not pulled. This

feature allows the operator to release the trigger gun and reposition themselves without having to turn

the engine off in between cleaning actions.

Allowing the unit to run for more than two minutes without the gun trigger being pulled

could cause overheating and damage to the pump. Do not let the pressure washer run for more than

two minutes in Bypass Mode. Turn off the engine and relieve the pressure in the gun during these

extended situations.

Thermal Relief Valve (not shown): When the temperature inside the pump rises too high, this valve

will open and release a gush of water in an effort to lower the temperature inside the pump. The valve

will then close.

Chemical Injection System: Mixes cleaners or cleaning solvents with the water to improve clean-

ing effectiveness. Depending on your machine, this could either be a Detergent Siphon Tube (which

is inserted into a container of detergent), or a Detergent Tank (which is ﬁ lled with detergent and is an

integral part of the pressure washer frame).

Water Supply: All pressure washers must have a source of water. The minimum requirements for a

water supply are 20 PSI and 5 Gallons Per Minute.

PRESSURE WASHER OPERATING FEATURES - SPRAY WAND

Spray Wand: There are two types of spray wands that can be included with your pressure washer.

Check Carton Contents section of this manual to see which Wand your pressure washer uses.

1) Variable Spray Wand. This wand includes both high and low pressure settings. The high pres-

sure setting is for cleaning and rinsing, and the low pressure setting is for applying chemicals or

cleaning solutions to surfaces.

For high pressure opera-

tion, pull back the nozzle

of the multi-adjustable

spray wand as shown.

For low pressure opera-

tion and detergent appli-

cation, extend the nozzle

of the variable spray

wand as shown.

The nozzle at the end of the variable

spray wand can be rotated to change

from the high pressure spray pattern

from a 0º pencil stream to a 40º fan

spray, as shown. Markings have been

placed on the nozzle to help you select

the spray pattern.

Risk of ﬂ uid injection. Do not direct discharge stream toward persons, unpro-

tected skin, eyes, or any pets or animals. Serious injury will occur.

PRESSURE WASHER OPERATING FEATURES - SPRAY WAND

The powerful spray from your pressure washer is capable of causing damage to surfac-

es such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as ﬂ owers

and shrubs. Before spraying, check the items to be cleaned to assure yourself that it is strong enough

to resist damage from the force of the spray.

2) Quick Connect Nozzle Wand. This model may include a variety of quick connect nozzles with

different spray patterns. This Wand is commonly found on pressure washers with a PSI rating above

2500 PSI. The chart below explains the differences in the various nozzles. Note that not all machines

are shipped with every nozzle - check Carton Contents section of this manual to see which nozzles, if

any, are included with your pressure washer.

Nozzle Color Spray Pattern

0º

15º

25º

40º

Low Pressure

Red

Yellow

Green

White

Black

Uses

Surfaces*

Extreme cleaning of

very hard surfaces cov-

ered in grease and oil.

Steel, Undamaged Concrete.

Intense cleaning of un-

painted hard surfaces.

Grills, driveways, concrete or brick walk-

ways, unpainted brick or stucco.

Standard cleaning

nozzle for most applica-

tions.

Yard tools, sidewalks, lawn furniture, un-

painted siding, stucco, gutters and eaves,

concrete, brick surfaces.

Cleaning of painted or

delicate surfaces.

Auto/RV, marine, wood, painted brick and

stucco, vinyl, painted siding.

Applies cleaning solu-

tions.

Low pressure spray is safe on all surfaces.

Always verify compatibility of cleaning solu-

tion prior to use.

* The powerful spray from your pressure washer is capable of causing damage to

surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as

ﬂ owers and shrubs. Before spraying, check the items to be cleaned to assure yourself that it is strong

enough to resist damage from the force of the spray.

Changing Nozzle on the Spray Wand

Risk of ﬂ uid injection. Do not direct discharge stream toward persons, unpro-

tected skin, eyes, or any pets or animals. Serious injury will occur.

Flying objects could cause risk of serious injury. Do not attempt to change nozzles

while pressure washer is running. Turn engine off before changing nozzles.

Flying objects could cause risk of serious injury. Ensure nozzle is completely inserted in

quick connect socket snap ring is fully engaged (forward) before squeezing gun trigger.

Changing Nozzles on Spray Wand (continued)

1) Pull quick connect coupler back and insert nozzle.

2) Release quick connect coupler and twist nozzle to make sure it is secure

in the coupler.

How to Apply Chemicals / Cleaning Solvents

Applying chemicals or cleaning solvents is a low pressure operation. If your pressure washer is

equipped with a detergent siphon hose, follow steps 1-4. If your pressure washer is equipped with an

on-board detergent tank, follow steps 5-8:

DETERGENT SIPHON HOSE

1) Press chemical hose onto the barbed ﬁ tting located near the high pressure hose connection on the

pump.

2) Place other end of chemical hose with ﬁ lter on it into container holding chemical/cleaning solution.

NOTE: For every 7 gallons of water pumped, one gallon on chemical/cleaning solution will be used.

3) Set your Wand to Low Pressure Setting either by inserting the Black Nozzle into your Wand or pull-

ing the Variable Wand Nozzle outwards. See How To use Spray Wand section in this owners manual.

4) After use of chemicals, place chemical hose into container of clean water and draw clean water

through chemical injection system to rinse thoroughly. If chemicals remain in the pump it could be

damaged. Pumps damaged due to chemicals will not be covered under warranty.

DETERGENT TANK

5) Fill your detergent tank with pre-mixed cleaning solutions designed for pressure washer use.

6) Check and make sure the “On-Off” valve for the tank is in the “On” position.

NOTE: For every 7 gallons of water pumped, one gallon on chemical/cleaning solution will be used.

7) Set your Wand to Low Pressure Setting either by inserting the Black Nozzle into your Wand or pull-

ing the Variable Wand Nozzle outwards. See How To use Spray Wand section in this owners manual.

8) After use of chemicals, reﬁ ll your detergent tank with clean water and operate your chemical injec-

tion system to rinse it thoroughly. If chemicals remain in the pump it could be damaged. Pumps dam-

aged due to chemicals will not be covered under warranty.

NOTE: Only use soaps and chemicals designed for pressure washer use. Do not use bleach!

NOTE: Chemicals and soaps will not siphon when Variable Spray Wand is in the High Pressure Set-

ting, or if the Quick Connect Spray Wand is equipped with the Red, Yellow, Green, or White Nozzles.

Risk of property damage. Never pull water supply hose to move pressure washer.

This could damage the hose and/or the pump inlet.

• Do not use Hot water, only use cold water.

• Never turn water supply off while pressure washer engine is running, or damage to the pump will

occur!

• Do not stop spraying water for more than two minutes at a time. Pump operates in bypass mode

when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes

internal components of the pump can be damaged.

If you do not understand these precautions, please go to www.power-washer.us

to speak to a service representative for further instructions.

Starting Your Pressure Washer

Prior to starting, refer to your Engine Owners Manual for the proper starting procedure.

1) In a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rat-

ing of 86 or higher. Do not overﬁ ll. Wipe up spilled fuel before starting engine. Refer to Engine

Owners Manual for correct procedure and fuel information.

2) Check engine oil level. See Engine Owners Manual for correct procedure.

3) Connect the water hose to the water source. Turn the water source on to

remove all air from the hose. When a steady stream of water is present, turn

the water source off.

4) Verify the ﬁ lter screen is in the water inlet of the pump.

5) Connect water source to pump inlet. NOTE: Water Source must provide a

minimum of 5 gallons (18.9 liters) per minute at 20 PSI (137.9kPa).

To reduce the possibility of contamination always protect against backﬂ ow when

connected to a potable water system.

6) Connect high pressure hose to pump outlet.

7) If applying a chemical or cleaning solution, see How To Apply Chemicals/Cleaning Solvents

instructions in this manual.

8) Turn water source on.

9) Remove all air from the pump and high pressure hose by depressing trigger until a steady stream

of water is present.

10) Start engine. See Engine Owners Manual for correct procedure.

Risk of unsafe operation. If engine does not start after two pulls, squeeze trigger of

gun to relieve pump pressure. Pull starter cord slowly until resistance is felt, then pull cord rapidly to

avoid kickback and prevent hand or arm injury.

11) Depress trigger on gun to start water ﬂ ow.

Risk of unsafe operation. Stand on a stable surface and grip gun/spray wand ﬁ rmly

with both hands. Expect the gun to kick when triggered.

12) Release trigger to stop water ﬂ ow.

Risk of injury from spray. Always engage the trigger lock when

gun is not in use. Failure to do so can cause accidental spraying.

13) Adjust Variable Spray Wand for task, or change Quick Connect Nozzle

based on the task at hand.

Shutting Down Your Pressure Washer

1) After each use, if you have applied chemicals, clean your chemical system

as described in How to Apply Chemicals / Cleaning Solvents section on

previous page.

Risk of Property Damage. Failure to clean chemical system could result in damage to

the pump.

2) Turn off the Engine. See Engine Owners Manual for complete details.

Risk of property damage. Never turn the water off with the engine running.

3) Turn off the water source.

4) Pull trigger on spray gun to relieve any water pressure in the hose or spray gun.

5) See Storage section in this manual for proper procedures.

Filter Screen

Trigger Lock Engaged

Risk of burn hazard. When performing maintenance, you may be exposed to hot

surfaces, water pressure, or moving parts that can cause serious injury or death.

Risk of ﬁ re hazard. Always disconnect spark plug wire, let engine cool, and

release all water pressure before performing any maintenance or repair. The

engine contains ﬂ ammable fuel. Do not smoke or work near open ﬂ ames while

performing maintenance.

To ensure efﬁ cient operation and longer life of your pressure washer, a routine maintenance schedule

should be prepared and followed. If the pressure washer is used in unusual conditions, such as high-

temperatures or dusty conditions, more frequent maintenance checks will be required.

ENGINE

Consult the Engine Owners Manual for the manufacturer’s recommendations for any and all mainte-

nance. NOTE: The engine drain plug is located at the rear of the unit.

PUMP

The pump was ﬁ lled with oil at the factory. The pump on this unit is maintenance free and requires no

oil. If there is a problem with the pump contact us at www.power-washer.us

NOZZLE CLEANING

If the nozzle becomes clogged with foreign materials, such as dirt, excessive pressure may develop.

If the nozzle becomes partially clogged or restricted, the pump pressure will pulsate. Clean the noz-

zle immediately using the nozzle kit supplied and the following instructions:

1) Shut off the pressure washer and turn off the water supply.

2) Pull trigger on gun handle to relieve any water pressure.

3) Disconnect the spray wand from the gun.

NOTE: If you have a variable Spray Wand, continue with step #4. If you have Quick Connect Noz-

zles, proceed ahead to step #8.

4) Remove the nozzle from the end of the wand with a 2mm Allen

Wrench as shown.

5) Clean the nozzle using the nozzle cleaner provided, or a

straightened paper clip. Insert into the nozzle end and work

back and forth until the obstruction is removed.

6) Direct water supply into nozzle end to backﬂ ush loosened

particles for 30 seconds.

7) Insert the nozzle back into the wand using a 2mm Allen Wrench, and tighten securely.

8) Remove the high-pressure nozzle from the spray wand.

Remove any obstructions with the nozzle cleaning tool

provided, or a straightened paper clip, and work back and

forth until the obstruction is removed.

9) Direct water supply into nozzle end to backﬂ ush loosened particles for 30 seconds.

10) Reassemble the nozzle to the wand.

MAINTENANCE

Filter Screen

CLEAN THE WATER INLET FILTER

This screen ﬁ lter should be checked periodically and cleaned if necessary.

1) Remove ﬁ lter by grasping end and removing it from water inlet of pump.

2) Clean ﬁ lter by ﬂ ushing it with water on both sides.

3) Re-insert ﬁ lter into water inlet of pump.

NOTE: Do not operate the pressure washer without ﬁ lter properly installed.

STORAGE

ENGINE

Consult the Engine Owners Manual for manufacturer’s recommendations for storage.

PUMP

The manufacturer recommends using a pump protector/winterizer when storing the unit for more than

30 days and/or when freezing temperatures are expected. Pump protector/winterizer is usually avail-

able at the store where the pressure washer was purchased. If a pump protector/winterizer is not

available, RV antifreeze needs to be run through the pump as outlined in the steps below.

NOTE: Using a pump protector/winterizer or RV antifreeze is to provide proper lubrication to the inter-

nal seals of the pump regardless of temperature or environment.

1) Obtain a funnel, 6 ounces (170 mL) of RV Antifreeze, and

a 16” to 36” (40-91cm) section of garden hose with a male

hose connector attached to one end.

Risk of Property Damage. Use only RV

Antifreeze. Any other antifreeze is corrosive

and can damage the pump.

2) Disconnect the spark plug wire.

3) Connect the length of garden hose to the water inlet of the

pump.

4) Add RV Antifreeze to hose as shown.

5) Pull starter rope slowly several times until antifreeze comes

out of the high pressure hose connection of the pump.

6) Remove garden hose from water inlet of pump.

7) Reconnect spark plug wire.

PRESSURE WASHER

1) Drain all water from high pressure hose, coil it, and store it in cradle of the pressure washer handle.

2) Drain all water from the spray gun and wand by holding spray gun in a vertical position with nozzle

end pointing down and squeezing trigger. Store in gun holder.

3) Store chemical hose, if so equipped, so it is protected from damage.

REPAIRS

To assure product SAFETY and RELIABILITY, repairs, maintenance, and adjustment should be per-

formed by an Authorized Warranty Service Center. Always use identical replacement parts. For the

location of the nearest Authorized Service Center go to www.power-washer.us

Recommended accessories for use with our pressure washer are available for purchase from your

local retailer or authorized service center. if you need assistance in locating any accessory for your

pressure washer, please go to www.power-washer.us

Risk of ﬂ uid injection. When using replacement lances or guns with this pres-

sure washer, DO NOT use a lance and/or lance/gun combination that is shorter in

length than what was provided with this pressure washer as measured from the

nozzle end of the lance to the gun trigger.

The use of any other accessory not recommended for use with this tool could be haz-

ardous. use only accessories rated equal to or greater than the rating of the pressure

washer.

ACCESSORIES

TROUBLE SHOOTING GUIDE

PROBLEM CAUSE

CORRECTION

Engine will not

start (see Engine

manual for further

troubleshooting).

No Fuel

Pressure builds up after two pulls on

the recoil starter or after initial use.

Choke level in the “No Choke” position.

Spark plug wire not attached.

Engine Switch in the “OFF” Position.

Choke lever in the “CHOKE” position

on a “hot” engine or an engine that has

been exposed to thermal heat for a

long period of time.

Add fuel.

Squeeze gun trigger to relieve pres-

sure.

Move choke to the “CHOKE” position.

Attach spark plug wire.

Place engine switch in “ON” Position.

Move choke to the “NO CHOKE” posi-

tion.

No or low pressure

(initial use).

Continued on next

page.

Variable Spray Wand not in High Pres-

sure Position.

Low Water Supply.

Leak at high pressure hose ﬁ tting.

Nozzle Obstructed.

Water Filter Screen Clogged.

Air in hose.

See How to Use Spray Wand instruc-

tions.

Water Supply must be at least 5 GPM

and 20 PSI.

Repair Leak. Apply sealant tape if

necessary.

See Nozzle Cleaning instructions.

Remove and clean ﬁ lter.

Turn off the engine, then the water

source. Disconnect the water source

from the pump inlet and turn the water

source on to remove all the air from the

hose. When a steady stream of water

is present, turn the water source off.

Re-connect water source to pump inlet

and turn on water source. Squeeze

trigger to remove remaining air.

TROUBLE SHOOTING GUIDE (continued)

PROBLEM CAUSE

CORRECTION

No or low pressure

(initial use).

Choke in the “CHOKE” Position.

High pressure hose is too long.

Move choke to the “NO CHOKE” posi-

tion.

Use high pressure hose under 100 feet

(30m).

Will not draw

chemicals.

No or low pressure

(after period of

normal use).

Water leaking at

gun/spray wand

connection.

Water leaking at

pump.

Pump pulsates.

Spray wand not in low pressure.

Chemical ﬁ lter is clogged.

Chemical screen not in cleaning solu-

tion.

Chemical is too thick.

Pressure hose is too long.

Chemical build up in chemical injector.

Worn seal or packing.

Worn or obstructed valves.

Worn unloader piston.

Work or broken o-ring.

Loose Hose Connection.

Loose Connections.

Piston packings worn.

Work or broken o-rings.

Pump head or tubes damaged from

freezing.

Nozzle Obstructed.

See How to Use Spray Wand section.

Clean ﬁ lter.

Make sure end of chemical hose is

fully submerged into cleaning solution.

Dilute chemical. Chemical should be

the same consistency as water.

Lengthen water supply hose instead of

high pressure hose.