Glacier Bay FS1A0201BL Guía de instalación

Categoría
Artículos sanitarios
Tipo
Guía de instalación
09/2017 REV.02
ONE-HANDLE LAVATORY FAUCET
SKU#
304775093
304774964
Model#
FS1A0201CP
FS1A0201BL
INSTALLATION AND CARE GUIDE
THANK YOU
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this lavatory
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
THD
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Table of Contents
Important Information ..............................2
Warranty ...................................................2
Pre-Installation .........................................2
Planning Installation ...........................2
Tools and Hardware Required.............2
Package Contents ...............................3
Installation ................................................4
Operation...................................................8
Care and Cleaning ....................................8
Troubleshooting ........................................8
Service Parts .............................................9
Important Information
Observe all local plumbing and building codes.
Cover the drain in your sink to avoid losing parts.
Review the care and cleaning section included in this guide.
This product is engineered to meet the EPA WaterSense flow requirement. The flow rate is governed by the
aerator or flow controller. If replacement is ever required, be sure to replace it with a WaterSense compliant
aerator or flow controller to retain the water conserving flow rate of this product.
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.
Simply return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-
434-5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental / inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
a five year limited warranty from the date of purchase, with all other terms of this warranty applying except the
duration of the warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for
more details.
Pre-Installation
PLANNING INSTALLATION
Before you begin to install this product, ensure that all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service for
replacement parts.
TOOLS AND HARDWARE REQUIRED
SILICONE
Adjustable
wrench
Safety
goggles
Sealant
Channel-lock
pliers
Phillips
screwdriver
2
Pre-Installation (continued)
PACKAGE CONTENTS
Faucet Assembly Drain Assembly
Tool
H
I*
C
G
E
F
D
U*
A
B*
T
S
Q
R
O
P
K*
J*
L*
M*
N*
NOTE: *Items come pre-assembled.
Part Description Quantity
A Faucet 1
B Aerator 1
C Spout trim ring 1
D Rubber washer 1
E Metal washer 1
F Lock nut 2
G Deck plate 1
H Gasket 1
I Supply line 2
J Pop up stopper 1
K Drain flange 1
Part Description Quantity
L Rubber washer 1
M Lock nut 1
N Drain body 1
O Joint 1
P Horizontal rod 1
Q Lift rod strap 1
R Clip 1
S Lift rod 1
T Extension rod 1
U Threaded rod 2
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for
further assistance.
3
Installation
Slide the rubber washer (D) and metal washer
(E) over threaded rods (U) and lift rod (S). Use the
lock nuts (F) to secure the rubber washer (D) and
metal washer (E).
Attach the extension rod (T) to one lock nut (F),
feed a screwdriver (not included) through the
bottom of the extension rod (T), and then tighten
the lock nut (F). Repeat for the second lock nut
(F).
1
2
A
S
C
G
H
I
1
2
D
F
T
E
U
S
A
S
C
I
Shut off the water supply. Remove the old faucet.
Clean off the mounting surface.
WITHOUT DECK PLATE: Insert the supply lines (I)
and lift rod (S) through the spout trim ring (C) and
mounting hole in the sink until the faucet (A) sets
on top of the sink, ensuring the tab on the spout
trim ring (C) is aligned with the hole at the bottom
left of the faucet (A).
WITH DECK PLATE: Align the hole in the gasket
(H) and deck plate (G) with the mounting hole in
the sink. Insert the supply lines (I) and the lift rod
(S) through the spout trim ring (C) , deck plate (G)
and mounting hole in the sink until the faucet (A)
sets on top of the deck plate (G), ensuring the tab
on the spout trim ring (C) is aligned with the hole
at the bottom left of the faucet (A).
1
Installing the faucet assembly
2
Securing the faucet
NOTE: If the sink is uneven, use silicone under the
gasket (H).
WARNING: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE: Make sure the faucet (A), spout trim ring (C) and
the deck plate (G) are aligned while tightening the lock
nut (F).
4
Installation (continued)
1
2
L
M
N
K
J
1
2
SILI
L
1
M
K
N
Remove the pop up stopper (J) and drain flange
(K) from the drain body (N).
Screw the lock nut (M) all the way down, and
push the rubber washer (L) down.
Apply silicone sealant (not included) under the
drain flange (K) and place the drain flange (K)
over the drain hole in the sink.
From underneath the sink, screw the drain body
(N) onto the drain flange (K). Ensure that the
opening (1) for the ball rod on the drain body (N)
faces towards the rear of the sink.
Tighten the rubber washer (L) and lock nut (M) on
the drain body (N). Do not overtighten.
3
Preparing the pop-up assembly
4
Installing the drain body
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for
further assistance.
5
Installation (continued)
1
3
2
P
O
P
O
2
1
N
J
N
Insert 2
Insert 1
S
Q
S
Q
Slide the lift rod (S) down into the lift rod strap (Q)
until it clicks into the lift rod strap (Q).
Before installation, unscrew the protective cap (1)
from the horizontal rod (P).
Insert the pop up stopper (J) into the drain hole
in the sink.
Insert the horizontal rod (P) into the drain body
(N) and through the hole of the stopper (J). See
insert 1.
For easier removal and cleaning, rotate the
stopper (J) 90 degrees so that the horizontal rod
(P) does not go through the hole in the stopper
(J). See insert 2.
Make sure the joint (O) on the horizontal rod (P)
inserts into the drain body (N) completely, as
shown (2). You can press the two sides of the
joint (O) to remove the horizontal rod (P).
6
Installing the lift rod
5
Installing the stopper and
horizontal rod
6
Installation (continued)
1
3
2
3
4
4
5
Q
R
Q
R
Q
R
J
R
P
J
P
J
P
Hole
J
S
1
1
RED LINE
HOT
COLD
BLUE LINE
2
7
Attaching the horizontal rod and strap
8
Checking the operation of the
pop up
9
Making the water supply
connections
Press the rod (P) down to ensure the stopper (J) is in the maximum open position.
Slide the clip (R) upward, adjust the location of the lift rod strap (Q) to the appropriate height and insert the
horizontal rod (P) with the correct hole of the lift rod strap (Q).
Move the lift rod strap (Q) in or out to choose an appropriate location.
Slide the clip (R) downward until it secures with the horizontal rod (P).
Use two adjustable wrenches to connect and
tighten the supply lines to the supply valves.
Connect the red supply line to the hot water
supply valve.
Connect the blue supply line to the cold water
supply valve.
Operate the lift rod (S) up and down to verify that
the stopper (J) opens and closes correctly.
NOTE: If the pop up lift rod strap (Q) is interfering with your installation, the lift rod strap (Q) can be cut shorter. Once you have identified
the proper hole in the lift rod strap (Q) that is necessary for your installation, you may cut off the bottom portion of the lift rod strap (Q).
NOTE: If a shorter lift rod (S) is required for your installation, you may call Glacier Bay Customer Service for assistance.
CAUTION: Ensure the supply lines do not kink, twist or
bend into a “V” or “L” shape during installation. Do not use
if there are visible signs of damage.
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for
further assistance.
7
Operation
Care and Cleaning
Troubleshooting
B
A
1
2
To clean, wipe down with a damp cloth and towel dry.
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
Problem Possible Cause Solution
There are leaks from the
handle.
The bonnet nut is loose.
The O-ring on the cartridge is
dirty or damaged.
Tighten the bonnet nut.
Clean or replace the O-ring.
The aerator leaks or has a
reduced water flow.
The aerator is dirty or mis-fitted.
The cartridge may be clogged.
Remove the aerator and check for
debris.
Remove the cartridge and check for
debris.
Ensure the aerator is properly
installed.
The sink drain at the base of
the sink is leaking.
The sink surface is rough or
irregular.
Retighten and test for leaks.
The water will not shut off
completely.
The cartridge bonnet nut
is loose or cartridge is not
positioned correctly.
The cartridge is damaged.
Reinstall the cartridge after cleaning
and tighten the bonnet nut.
If the problem still exists, replace the
cartridge.
1
Flushing and checking for leaks
Ensure the handle is in the off position. Turn
on the water supply and check for leaks. If you
discover any leaks, check your connections to
ensure they are installed properly.
Use a coin to remove the aerator (B) from the
faucet (A). Lift the handle to allow the water to
run for at least one minute. This flushes away any
debris that could cause damage to internal parts.
Turn off the water and reinstall the aerator (B)
and housing (if applicable).
IMPORTANT: After installation is complete, remove the
aerator to flush the water lines. Do not lose the gasket in
the aerator.
NOTE: Refer to the service parts section in this manual
for a detailed drawing showing the location of the parts
listed below.
8
Service Parts
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
DATE CODE:
DO NOT REMOVE
1-800-487-8372
HOT
Faucet ID Tags can
be found on the hot
supply line
*Specify Finish
Many replacement cartridges, aerators, and drain
assemblies can be purchased at your local The
Home Depot store or online at HOMEDEPOT.COM.
Part Description Part No.
1 Metal Handle Assembly A66E910*
2 Handle Trim Ring A103042*
3 Adjusting Ring A66G511N
4 Ceramic Disc Cartridge A507084N
5 Spout Trim Ring A66F648*
Part Description Part No.
6 Cover Plate & Gasket A663082-S*
7 Mounting Hardware Assembly A603106
8 Aerator A553055N
9 Lift Rod A025605*
10 ClickInstall™ Drain Assembly A505032
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for
further assistance.
9
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Retain this manual for future use.
GRIFO DE UNA MANIJA PARA LAVABO
Núm. de sku
304775093
304774964
Núm. de modelo
FS1A0201CP
FS1A0201BL
GRACIAS
Apreciamos la confianza que ha dep ositado en Glacier Bay por la compra de este para lavabo. Nos esforzamos por
crear continuamente productos de calidad diseñados para mejorar su hogar. Visítenos en internet para ver nuestra ínea
completa de productos disponibles para sus necesidades de mejorar su hogar. ¡Gracias por elegir a Glacier Bay!
¿Tiene preguntas, problemas, o faltan piezas?
Antes de regresar a la tienda, llame a Servicio al Cliente de Glacier Bay
de lunes a viernes de 8 a.m. a 7 p.m., hora local del Este
de lunes a viernes de 9 a.m. a 6 p.m., sábado
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
GUÍA DE INSTALACIÓN Y CUIDADO
Tabla de Contenido
Información Importante............................2
Garantía.....................................................2
Pre-instalación..........................................2
Planificación de la Instalación............2
Herramientas y Piezas Necesaria.......2
Contenido del Paquete........................3
Instalación.................................................4
Operación...................................................8
Cuidado y Limpieza....................................8
Solución de Problemas...............................8
Piezas de Repuesto....................................9
Información Importante
Cumpla con todos los códigos locales de plomería y de construcción.
Tape el desagüe del lavabo para evitar que se pierdan piezas.
Lea el apartado cuidado y limpieza de esta guía.
Este producto está diseñado para cumplir con los requisitos de flujo de agua del Programa EPA WaterSense.
La tasa de flujo está regulada por el controlador de flujo. Si es necesario reemplazarlo, asegúrese de solicitar
un controlador de flujo apropiado para devolver el producto a su caudal máximo previsto y a otros requisitos
de la EPA.
Garantía
GARANTÍA DE POR VIDA LIMITADA
Los productos de Glacier Bay están fabricados con normas y mano de obra de calidad superior y están respaldados
por nuestra garantía de por vida limitada. Los productos de Glacier Bay están garantizados al comprador consumidor
original de estar libres de defectos en materiales o mano de obra. Reemplazaremos LIBRE DE CARGOS cualquier pro-
ducto o pieza que se demuestre está defectuosa. Símplemente, devuelva el producto a cualquiera de las ubicaciones
de venta al detalle de The Home Depot o llame al 1-855-HD Glacier (1-855-434-5224) para recibir el artículo de
reemplazo. La prueba de compra (recibo de venta original) del comprador consumidor original debe estar disponible
para todos los reclamos de garantía de Glacier Bay.
Esta garantía excluye daños y fallos incidentales / consecuenciales debido al mal uso, abuso o desgaste normal por
el uso. Esta garantía excluye todos los usos industriales, comerciales y de negocios, a cuyos compradores por la
presente, se les ha ampliado una garantía limitada de cinco años a partir de la fecha de compra, con todos los otros
artículos de esta garantía que aplican excepto la duración de la garantía.
Algunos estados y provincias no permiten la exclusión o la limitación de los daños incidentales o consecuenciales,
por lo tanto, las limitaciones y exclusiones anteriores podrían no aplicar a usted. Esta garantía le otorga derechos le-
gales especícos y también puede tener otros derechos que varían de un estado a otro. Por favor, vaya a una tienda
o llame al 1-855-HD Glacier para más detalles.
Pre-instalación
PLANIFICACIÓN DE LA INSTALACIÓN
Antes de comenzar a instalar este producto, asegúrese de que todas las partes estén presentes. Compare las
partes con la lista de contenido del paquete. Si hace falta alguna parte o se encuentra dañada, no intente instalar el
producto. Póngase en contacto con servicio al cliente para las partes de reemplazo.
HERRAMIENTAS Y PIEZAS NECESARIAS
SILICONE
Llave
ajustable
Gafas de
seguridad
Sellador
Pinzas
ajustables
Destornillador
cruciforme
2
Pre-instalación (continuación)
CONTENIDO DEL PAQUETE
Ensamblaje del Grifo Tubo de Desagüe
Herramientas
H
I*
C
G
E
F
D
U*
A
B*
T
S
Q
R
O
P
K*
J*
L*
M*
N*
NOTA: *Las piezas vienen preensambladas.
Pieza Descripción Cantidad
A Grifo 1
B Aireador 1
C Anillo decorativo del caño 1
D Arandela de goma 1
E Arandela de metal 1
F Contratuercas 2
G Placa de soporte 1
H Empaque 1
I Conducto de alimenación 2
J Tapón levadizo 1
K Reborde del desagüe 1
Pieza Descripción Cantidad
L Arandela de goma 1
M Contratuerca 1
N Cuerpo del desagüe 1
O Junta 1
P Varilla horizontal 1
Q Varilla levadiza 1
R Clip 1
S Varilla de elevación 1
T Varilla extensión 1
U Varilla roscada 2
3
HOMEDEPOT.COM/GLACIERBAY
Para obtener asistencia, póngase en
contacto llamando al 1-855-HD-GLACIER.
Instalación
1
2
A
S
C
G
H
I
1
2
D
F
T
E
U
S
A
S
C
I
Cierre el suministro de agua. Retire el grifo viejo.
Limpie la superficie donde va a montar el grifo.
SIN PLACA DE SOPORTE: Introduzca los
conductos de alimentación (I) y la varilla de
elevación (S) a través del anillo ornamental del
grifo (C) y del orificio de montaje en el lavabo
hasta que el grifo (A) se fije en la parte superior
del lavabo, procurando que la lengüeta del anillo
ornamental del grifo (C) esté alineada con el
orificio en la parte inferior izquierda del grifo (A).
CON PLACA DE SOPORTE: Alinee el orificio del
empaque (H) y la placa de soporte (G) con el
orificio de montaje en el lavabo. Introduzca los
conductos de alimentación (I) y la varilla de
elevación (S) a través del anillo ornamental del
grifo (C), de la placa de soporte (G) y del orificio
de montaje en el lavabo hasta que el grifo (A) se
fije en la parte superior de la placa de soporte
(G), procurando que la lengüeta del anillo
ornamental del grifo (C) esté alineada con el
orificio en la parte inferior izquierda del grifo (A).
REMARQUE : Si le lavabo n’est pas de niveau, appliquer
du scellant à base de silicone sous le joint statique (H).
CUIDADO: Cierre siempre el suministro de agua antes
de retirar el grifo viejo o sustituir cualquier pieza de un
grifo. Abra la manija del grifo para reducir la presión
del agua y compruebe que el agua está completamente
cortada.
NOTA: Compruebe que el grifo (A), el anillo ornamental
del grifo (C) y la placa de soporte (G) estén alineados
mientras aprieta la contratuerca (F).
Introduzca la arandela de goma (D) y la arandela
metálica (E) por las varillas roscadas (U) y la
varilla elevación (S). Use las contratuercas
(F) para sujetar la arandela de goma (D) y la
arandela metálica (E).
Sujete la varilla extensión (T) a una contratuerca
(F), introduzca un destornillador (no incluido) por
el orificio de la base de la varilla extensión (T) y
apriete la contratuerca (F). Repita la operación
con la segunda contratuerca (F).
Instalación del conjunto del
grifo
1
Sujeción del grifo
2
4
Instalación (continuación)
1
2
L
M
N
K
J
1
2
SILI
L
1
M
K
N
Retire el tapón levadizo (J) y el reborde del
desagüe (K) del cuerpo del desagüe (N).
Enrosque la contratuerca (M) totalmente hasta
abajo y empuje hacia abajo la arandela de goma
(L).
Ponga sellante de silicona (no incluido) debajo
del reborde del desagüe (K) y colóquelo sobre el
orificio del desagüe (K) del lavabo.
Enrosque el cuerpo del desagüe (N) en el
reborde del desagüe (K) por debajo del lavabo.
Compruebe que la abertura (1) para la varilla de
rótula del cuerpo del desagüe (N) está de cara a
la parte trasera del lavabo.
Apriete la arandela de goma (L) y la contratuerca
(M) en el cuerpo del desagüe (N).
Preparación del conjunto
levadizo
3
Instalación del desagüe
4
5
HOMEDEPOT.COM/GLACIERBAY
Para obtener asistencia, póngase en
contacto llamando al 1-855-HD-GLACIER.
Instalación (continuación)
1
3
2
P
O
P
O
2
1
N
J
N
Recuadro 2
Recuadro 1
S
Q
S
Q
Pase de arriba a abajo la varilla de elevación (S)
por la varilla levadiza (Q) hasta que encaje en
ésta.
Antes de la instalación, desenrosque el capuchón
protector (1) en la varilla horizontal (P).
Introduzca el tapón levadizo (J) en el orificio de
desagüe del lavabo
Introduzca la varilla horizontal (P) en el cuerpo
del desagüe (N) y a través del orificio del tapón
(J). Véase el recuadro 1.
Para facilitar la desinstalación y la limpieza, gire
el tapón levadizo (J) 90 grados de forma que la
varilla glóbulo (P) no pase por el orificio del tapón
levadizo (J). Véase el recuadro 2.
Compruebe que la junta (O) de la varilla
horizontal (P) esté introducida completamente
en el cuerpo del desagüe (N), como se ve en la
recuadro (2). Puede presionar en ambos lados de
la junta (O) para retirar la varilla horizontal (P).
Instalación del tapón y de
la varilla horizontal
5
Instalación de la varilla elevación
6
6
Instalación (continuación)
1
3
2
3
4
4
5
Q
R
Q
R
Q
R
J
R
P
J
P
J
P
Trou
J
S
1
1
2
LÍNEA ROJA
CALIENTE
FRÍA
LÍNEA AZUL
Presione hacia abajo la varilla (P) para lograr que el tapón (J) se sitúe en posición totalmente abierta.
Deslice el clip (R) hacia arriba, ajuste la colocación de la varilla levadiza (Q) a la altura adecuada e
introduzca la varilla horizontal (P) en el orificio adecuado de la varilla levadiza (Q).
Introduzca y saque la varilla levadiza (Q) para elegir un lugar adecuado.
Deslice el clip (R) hacia abajo hasta que se sujete con la varilla horizontal (P).
Utilice dos llave ajustable para conecta y apretar
las líneas de suministro de agua a las válvulas de
suministro.
Conecte la línea de suministro de rojo a la válvula
de suministro de agua caliente.
Conecte la línea de suministro de azul a la válvula
de suministro de agua fría.
Haga subir y bajar la varilla de elevación
(S) para verificar que el tapón abre y cierra
correctamente.
NOTA: Si la varilla levadiza (Q) obstaculiza la instalación, puede acortarse. Cuando haya encontrado el orificio adecuado en la varilla
levadiza (Q) que va a usar para la instalación, puede cortar la parte sobrante de la varilla levadiza (Q).
NOTA: Si la instalación requiere una varilla de elevación (S) más corta, puede solicitar ayuda al servicio de atención al cliente de Glacier
Bay.
PRECAUCIÓN: Asegúrese que las líneas de suministro
no se retuerzan, torcer o doblar en una “V” o “L” durante la
instalación. No lo use si hay signos visibles de daños.
Sujeción de la varilla horizontal y de la varilla levadiza
7
Vericación del funcionamiento
del mecanismo levadizo
8
Conexión del suministro de agua
9
HOMEDEPOT.COM/GLACIERBAY
Para obtener asistencia, póngase en
contacto llamando al 1-855-HD-GLACIER.
7
Operación
Cuidado y Limpieza
Solución de Problemas
B
A
1
2
Limpie con un trapo húmedo y seque con un paño.
No use limpiadores abrasivos, lana metálica ni productos químicos fuertes para limpiar el grifo o la garantía
podría anularse.
Problema Posible causa Solución
Hay fugas por la manija. La tuerca tapa está oja.
La junta tórica del cartucho está
sucia o dañada.
Apriete la tuerca tapa.
Limpie o reemplace el anillo O.
El aireador tiene fugas o un
ujo de agua reducido.
El aireador está sucio o mal
ajustado.
El cartucho puede estar obstruido.
Retire el aireador y compruebe si hay
suciedad.
Retire el cartucho y compruebe si hay
suciedad.
Compruebe que el aireador está insta-
lado correctamente.
El desagüe del lavabo en la
base del lavabo tiene una
fuga.
La supercie del lavabo es
desigual o irregular.
Ponga más sellante de silicona en la
parte biselada del reborde del desagüe.
Vuelva a apretar y verique si sigue
habiendo goteo.
Compruebe que el aireador
está instalado correcta-
mente.
La contratuerca está oja o el
cartucho no está colocado cor-
rectamente.
Retire el cartucho para vericar el
asiento de caucho y el resorte.
Apriete la contratuerca.
Limpie o sustituya.
1
Enjuague y verificación de fugas
Compruebe que la manija esté en posición
cerrada. Abra la alimentación de agua y
compruebe si hay fugas. De haberlas, verifique
que las conexiones estén bien hechas.
Use una moneda para retirar el aireador (B) del
grifo (A). Levante la manija para que el agua
corra al menos durante un minuto. De esta
manera se enjuagan los conductos y se hace
salir la suciedad que podría dañar las piezas
internas.
Cierre el agua y vuelva a instalar el aireador y el
receptáculo (de ser el caso).
IMPORTANTE: Una vez terminada la instalación, retire
el aireador para enjuagar los conductos de agua. No pierda
el empaque del aireador.
NOTA: Consulte la sección de piezas de repuesto de este
manual para ver dibujos detallados sobre la ubicación de
las piezas enumeradas abajo.
8
Piezas de Repuesto
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
DATE CODE:
DO NOT REMOVE
1-800-487-8372
HOT
Las etiquetas de
identificación del
grifo se encontrarán
en la tubería de
alimentación de agua
caliente.
*Especifique el Acabado
Muchos cartuchos, aireadores y conjuntos de desagüe
de repuesto se pueden adquirir en la tienda Home Depot
más próxima o en línea en HOMEDEPOT.COM.
Pieza Descripción Pieza No.
1
Ensamblado de Manija
Metálica
A66E910*
2 Moldura circular de la manija A103042*
3 Anillo de ajuste A66G511N
4 Cartucho de disco cerámico A507084N
5 Anillo decorativo del caño A66F648*
Pieza Descripción Pieza No.
6 Cubierta y empaque A663082-S*
7
Conjunto de piezas de
montaje
A603106
8 Aireador A553055N
9 Varilla de elevación A025605*
10
Conjunto de desagüe
ClickInstall
A505032
9
HOMEDEPOT.COM/GLACIERBAY
Para obtener asistencia, póngase en
contacto llamando al 1-855-HD-GLACIER.
¿Tiene preguntas, problemas, o faltan piezas?
Antes de regresar a la tienda, llame a Servicio al Cliente de Glacier Bay
de lunes a viernes de 8 a.m. a 7 p.m., hora local del Este
de lunes a viernes de 9 a.m. a 6 p.m., sábado
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Conserve este manual para uso futuro.
1 / 1

Glacier Bay FS1A0201BL Guía de instalación

Categoría
Artículos sanitarios
Tipo
Guía de instalación

En otros idiomas