Yamaha PSR-S775 Manual de usuario

Categoría
Software
Tipo
Manual de usuario

Este manual también es adecuado para

EN
This Reference Manual explains advanced features of the PSR-S975/S775.
Please read the Owner’s Manual first, before reading this Reference Manual.
Reference Manual
Digital Workstation
2 PSR-S975/S775 Reference Manual
Table of Contents
1Voices 3
Voice Types (Characteristics) ............................................ 3
Selecting GM&XG or Other Voices.................................... 5
Touch Response and Effect-Related Settings................... 6
Pitch-Related Settings ....................................................... 9
Editing Parameters Assigned to the LIVE CONTROL
Knobs............................................................................... 11
Editing Voices (Voice Set) ............................................... 15
Editing Organ Flutes Voices ............................................ 20
Adding New Contents—Expansion Packs....................... 22
2Styles 24
Chord Fingering Types .................................................... 25
Style Playback Related Settings ...................................... 27
Memorizing Original Settings to One Touch Setting........ 29
Creating/Editing Styles (Style Creator) ............................ 30
3 Songs 49
Editing Music Notation (Score) Settings .......................... 49
Editing Lyrics/Text Display Settings................................. 52
Using the Auto Accompaniment Features with Song
Playback .......................................................................... 53
Song Playback Related Parameters (Guide Function,
Channel settings, Repeat settings).................................. 54
Creating/Editing Songs (Song Creator) ........................... 58
4 USB Audio Player/Recorder 75
Displaying Lyrics of an Audio file ..................................... 75
5 Multi Pads 77
Creating Multi Pads (Multi Pad Creator) .......................... 77
Editing Multi Pads ............................................................ 79
6 Music Finder 81
Creating a Set of Favorite Records.................................. 81
Editing Records................................................................ 82
Saving the Records as a Single File ................................ 83
7 Registration Memory 85
Editing the Registration Memory...................................... 85
Disabling Recall of Specific Items (Freeze) ..................... 86
Calling Up Registration Memory Numbers in Order
(Registration Sequence) .................................................. 87
8 Microphone/Guitar Input 90
Making and Saving the Microphone/Guitar Settings
(EQ/CMP) ........................................................................ 90
Setting and Editing Vocal Harmony Types (PSR-S975).. 93
Editing the Synth Vocoder Types (PSR-S975) .............. 100
9 Mixing Console 104
Editing VOL/VOICE Parameters .................................... 104
Editing FILTER Parameters ........................................... 105
Editing TUNE Parameters.............................................. 106
Editing EFFECT Parameters ......................................... 107
Editing EQ Parameters .................................................. 111
Editing Master Compressor (CMP) Parameters ............ 113
Block Diagram................................................................ 115
10 Connections 116
Footswitch/Foot Controller Settings ............................... 116
MIDI Settings ................................................................. 120
Connecting with an iPhone/iPad via Wireless LAN........ 126
11 Other Functions 128
UTILITY.......................................................................... 128
SYSTEM ........................................................................ 132
Index 135
Each chapter in this Reference Manual corresponds to the relevant chapters in the Owner’s Manual.
The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat dif-
ferent from those on your instrument.
Even though the example screens and illustrations pertain to the PSR-S975, the usage is the same for the PSR-S775.
The displays are taken from the PSR-S975, and are in English.
The “Data List” and “iPhone/iPad Connection Manual” documents can be downloaded from the Yamaha website:
http://download.yamaha.com/
The company names and product names in this manual are the trademarks or registered trademarks of their respective compa-
nies.
Using the PDF manual
To quickly jump to items and topics of interest, click on the desired items in the “Bookmarks” index to the left
of the main display window. (Click the “Bookmarks” tab to open the index if it is not displayed.)
Click the page numbers that appear in this manual to go directly to the corresponding page.
Select “Find” or “Search” from the Adobe Reader “Edit” menu and enter a keyword to locate related informa-
tion anywhere in the document.
NOTE The names and positions of menu items may vary according to the version of Adobe Reader being used.
1
1
PSR-S975/S775 Reference Manual 3
Voices
Voices
Contents
Voice Types (Characteristics) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Selecting GM&XG or Other Voices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Touch Response and Effect-Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
• Setting the Touch Response of the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
• Making Detailed Settings for Harmony/Arpeggio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Pitch-Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Fine-tuning the Pitch of the Entire Instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Scale Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Changing the Part Assignment of the TRANSPOSE Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Editing Parameters Assigned to the LIVE CONTROL Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Editing Voices (Voice Set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
• Editable Parameters in the VOICE SET Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
• Disabling Automatic Selection of Voice Sets (Effects, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Editing Organ Flutes Voices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adding New Contents—Expansion Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
• Installing the Expansion Pack data from the USB Flash Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
• Uninstalling the Expansion Pack data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
• Saving the Instrument Info File to the USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
The particular type of Voice is indicated at the upper left of the Voice name in the Voice Selection display.
The defining characteristics of these Voices and their performance advantages are described below.
Voice Types (Characteristics)
S.Art!
(Super Articulation)
These Voices provide many benefits with great playability and expressive con-
trol in real time.
For example, with the Saxophone Voice, if you play a C and then a D in a very
legato way, you will hear the note change seamlessly, as though a saxophone
player played it in a single breath.
Similarly with the Concert Guitar Voice and play the D note strongly, the D
note would sound as a “hammer on,” without the string being plucked again.
Depending on how you play, other effects such as “shaking” or breath noises
(for the Trumpet Voice), or finger noises (for the Guitar Voice) are produced.
For details on how to best play each S.Art! Voice, call up the information win-
dow (pressing the [6 ] (INFO) button in the Voice Selection display).
Live! These acoustic instrument sounds were sampled in stereo, to produce a truly
authentic, rich sound—full of atmosphere and ambience.
Cool! These Voices use sophisticated programming to capture the dynamic textures
and subtle nuances of electric instruments.
Sweet! These acoustic instrument sounds also benefit from Yamaha’s sophisticated
technology—and feature a finely detailed and natural sound.
4 PSR-S975/S775 Reference Manual
1
Voices
NOTE S.Art! and MegaVoices are not compatible with other instrument models. For this reason, any Song or Style you’ve created on this instrument using these
Voices will not sound properly when played back on the instruments which do not have these types of Voices.
NOTE S.Art! and MegaVoices sound differently depending on keyboard range, velocity, touch, etc. Hence, if you turn on the [HARMONY/ARPEGGIO] button,
change the transpose setting or change the Voice Set parameters, unexpected or undesired sounds may result.
For a list of preset Voices of this instrument, refer to the “Voice List” in the Data List on the website.
Drums Various drum and percussion sounds are assigned to individual keys, letting
you play the sounds from the keyboard. For information about what sound is
assigned to each key, refer to the “Drum/SFX Kit List” in the Data List on the
website.
Live! Drums These are high-quality drum sounds that take full advantage of Stereo Sam-
pling and Dynamic Sampling.
SFX Various special effect sounds and percussion sounds are assigned to individual
keys, letting you play the sounds from the keyboard. For information about
what sound is assigned to each key, refer to the “Drum/SFX Kit List” in the
Data List on the website.
Live! SFX These are various high-quality special effect sounds and percussion sounds that
take full advantage of Stereo Sampling and Dynamic sampling.
Organ Flutes! This authentic organ Voice lets you use the Voice Set to adjust the various foot-
ages and craft your own original organ sounds. See page 20 for details.
MegaVoice These Voices make special use of velocity switching. Each velocity range (the
measure of your playing strength) has a completely different sound.
For example, a guitar MegaVoice includes the sounds of various performance
techniques. In conventional instruments, different Voices having those sounds
would be called up via MIDI and played in combination to achieve the desired
effect. However, now with MegaVoices, a convincing guitar part can be played
with just a single Voice, using specific velocity values to play the desired
sounds. Because of the complex nature of these Voices and the precise veloci-
ties need to play the sounds, they’re not intended for playing from the key-
board. They are, however, very useful and convenient when creating MIDI
data—especially when you want to avoid using several different Voices just for
a single instrument part.
The MegaVoices are in the “MegaVoices” folder in the Voice Selection display.
For instructions on selecting MegaVoices, refer to the “Selecting GM&XG or
Other Voices” on page 5.
PSR-S975/S775 Reference Manual 5
1
Voices
This instrument features Voices provided specially for Style playback and XG/GM compatibility. These
Voices cannot be called up directly from the VOICE category selection buttons. However, they can be called
up as described below.
1 Turn on the PART SELECT button corresponding to the part you want to use.
2 Press one of the VOICE category selection buttons (other than the [ORGAN FLUTES]
and [EXPANSION/USER] buttons) to call up the Voice Selection display.
3 Press the [8 ] (UP) button to call up the Voice categories.
4 Press the [2 ] (P2) button to display page 2.
5 Press the desired [A]–[J] button to call up the Voice Selection display of GM&XG
Voices, GM2 Voices, etc.
NOTE You can find the “Legacy” folder in this display. This folder contains previous Yamaha keyboards’ Voices (such as PSR-S950, PSR-S750, etc.) for data
compatibility with other models.
NOTE The “MegaVoices” folder contains the MegaVoices (page 4).
6 Select the desired Voice.
Selecting GM&XG or Other Voices
43
6 PSR-S975/S775 Reference Manual
1
Voices
Setting the Touch Response of the Keyboard
Touch Response determines how the sound responds to your playing strength. The selected Touch Response
type becomes the common setting for all Voices.
NOTE Some Voices are purposely designed without Touch Response, in order to emulate the true characteristics of the actual instrument (for example, conventional
organs, which have no touch response).
1 Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [D] CONTROLLER TAB [F] KEYBOARD/PANEL
2 Use the [A] button to select “1 TOUCH RESPONSE.
3 Use the [1 ], [2 ] and [4 ]–[7 ] buttons to set the Touch Response.
Touch Response and Effect-Related Settings
[1 ]/
[2 ]
TOUCH Determines the Touch Response type.
HARD 2: Requires strong playing to produce high volume. Best for play-
ers with a heavy touch.
HARD 1: Requires moderately strong playing for higher volume.
MEDIUM: Standard Touch Response.
SOFT 1: Produces high volume with moderate playing strength.
SOFT 2: Produces relatively high volume even with light playing
strength. Best for players with a light touch.
[4 ] TOUCH OFF
LEVEL
Determines the fixed volume level when Touch is set to “OFF.
[5 ]–
[7 ]
LEFT–RIGHT2 Turns Touch on or off for each keyboard part.
2
3
Touch Response is applied to
the checkmarked parts.
PSR-S975/S775 Reference Manual 7
1
Voices
Making Detailed Settings for Harmony/Arpeggio
This lets you make detailed settings, including volume level.
1 Call up the operation display.
[FUNCTION] TA B [ E] MENU 1 [B] HARMONY/ARPEGGIO
2 Select the desired Harmony/Arpeggio category and type by using the [1 ]–[6 ]
buttons.
3 Use the [7 ] (DETAIL) buttons to call up the detailed setting window.
4 Use the [3 ]–[8 ] buttons to make various Harmony/Arpeggio settings.
When any one of the Arpeggio types is selected, only the parameters indicated by “*” in the list below can
be set. None of the parameters in the list below are available when the Harmony category “Multi Assign”
type is selected.
[3 ] VOLUME* Determines the volume level of the Harmony/Arpeggio notes generated
by the Harmony/Arpeggio function.
NOTE When you are using certain Voices, such as Organ Voices, in which the TOUCH SENSE DEPTH is
set to 0 in the VOICE SET display (page 16), the volume does not change.
[4 ]/
[5 ]
ASSIGN* Determines the keyboard part to which the effect is assigned.
AUTO: Applies the effect to the part (RIGHT 1/2) for which PART ON/
OFF is on. If the Harmony/Echo category is selected, the RIGHT 1
part is given priority over the RIGHT 2 part when both parts are on.
MULTI: This parameter is available when the Harmony/Echo category is
selected. When both parts are on, the note played on the keyboard is
sounded by the RIGHT 1 part and the harmonies (effect) are divided to
the RIGHT 1 and RIGHT 2 parts. When only one part is on, the note
played on the keyboard and effect are sounded by that part.
RIGHT 1, RIGHT 2: Applies the effect to the selected part (RIGHT 1 or
RIGHT 2).
32
8 PSR-S975/S775 Reference Manual
1
Voices
NOTE The settings for the Arpeggio Quantize function and the Arpeggio Hold function can be made on the display called up via [FUNCTION] TAB [E]
MENU 1 [J] UTILITY TAB [E][F] CONFIG 2 (page 130).
[6 ] SPEED This parameter is only available when the “Echo” category (Echo, Trem-
olo, or Trill) is selected. It determines the speed of the Echo, Tremolo, and
Trill effects.
[7 ] CHORD NOTE
ONLY
This parameter is only available when the “Harmony” category is
selected. When this is set to “ON,” the Harmony effect is applied only to
the note (played in the right-hand section of the keyboard) that belongs to
a chord played in the chord section of the keyboard.
[8 ] TOUCH LIMIT It determines the lowest velocity value at which the Harmony, Echo,
Tremolo, or Trill note will sound. This allows you to selectively apply the
harmony by your playing strength, letting you create harmony accents in
the melody. The harmony effect is applied when you play the key strongly
(above the set value).
PSR-S975/S775 Reference Manual 9
1
Voices
Fine-tuning the Pitch of the Entire Instrument
You can fine-tune the pitch of the entire instrument such as keyboard, Style and Song parts (except the
keyboard part played by the Drum Kit or SFX Kit Voices, and audio playback)—a useful feature when
playing the PSR-S975/S775 along with other instruments or CD music.
1 Call up the operation display.
[FUNCTION]
TAB [
E
] MENU 1
[E] MASTER TUNE/SCALE TUNE
TAB [
E
] MASTER TUNE
2 Use the [4 ]/[5 ] buttons to set the tuning in 0.2 Hz steps.
Press both [] and [] buttons (of 4 or 5) simultaneously to reset the value to the factory setting of 440.0
Hz.
Scale Tuning
You can select various scales for playing in custom tunings for specific historical periods or music genres.
1 Call up the operation display.
[FUNCTION]
TAB [
E
] MENU 1
[E] MASTER TUNE/SCALE TUNE
TAB [
F
] SCALE TUNE
2 Use the [A]/[B] buttons to select the desired scale.
Preset Scale types
Pitch-Related Settings
EQUAL
The pitch range of each octave is divided equally into twelve parts, with each half-
step evenly spaced in pitch. This is the most commonly used tuning in music today.
PURE MAJOR, PURE
MINOR
These tunings preserve the pure mathematical intervals of each scale, especially for
triad chords (root, third, fifth). You can hear this best in actual vocal harmonies—
such as choirs and a cappella singing.
PYTHAGOREAN
This scale was devised by the famous Greek philosopher and is created from a
series of perfect fifths, which are collapsed into a single octave. The 3rd in this tun-
ing are slightly unstable, but the 4th and 5th are beautiful and suitable for some
leads.
MEAN-TONE
This scale was created as an improvement on the Pythagorean scale, by making the
major third interval more “in tune.” It was especially popular from the 16th century
to the 18th century. Handel, among others, used this scale.
WERCKMEISTER,
KIRNBERGER
This composite scale combines the Werckmeister and Kirnberger systems, which
were themselves improvements on the mean-tone and Pythagorean scales. The
main feature of this scale is that each key has its own unique character. The scale
was used extensively during the time of Bach and Beethoven, and even now it is
often used when performing period music on the harpsichord.
ARABIC1, ARABIC2
Use these tunings when playing Arabic music.
The tuning of each note for
the currently selected scale
is shown.
10 PSR-S975/S775 Reference Manual
1
Voices
3 Change the following settings as necessary.
NOTE To register the Scale Tune settings to Registration Memory, be sure to checkmark the SCALE item in the REGISTRATION MEMORY CONTENTS display
called up via the [MEMORY] button.
Changing the Part Assignment of the TRANSPOSE Buttons
You can determine to which parts the TRANSPOSE [-]/[+] buttons are applied.
1 Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [D] CONTROLLER TAB [F] KEYBOARD/PANEL
2 Use the [B] button to select “3 TRANSPOSE ASSIGN.
3 Press the [4 ]/[5 ] buttons to select the desired part assignment.
The assignment can be confirmed by the pop-up display called up via the TRANSPOSE [-]/[+] buttons.
[2 ] BASE NOTE Determines the base note for each scale. When the base note is changed,
the pitch of the keyboard is transposed, yet maintains the original pitch
relationship between the notes.
[3 ]/
[4 ]
TUNE Select the desired note to be tuned by using the [3 ] buttons and tune
it in cents by using the [4 ] buttons.
NOTE In musical terms a “cent” is 1/100th of a semitone. (100 cents equal one semitone.)
[5 ]–
[8 ]
PART SELECT Determines whether the Scale Tune setting is applied to each part or not.
KEYBOARD The TRANSPOSE [-]/[+] buttons affect the pitch of keyboard played Voices,
Style playback (controlled by the performance in the chord section of the key-
board), and Multi Pad playback (when Chord Match is on, and left-hand chords
are indicated)—but they do not affect Song playback.
SONG The TRANSPOSE [-]/[+] buttons affect only the pitch of Song playback.
MASTER The TRANSPOSE [-]/[+] buttons affect the overall pitch of the instrument,
except audio playback.
PSR-S975/S775 Reference Manual 11
1
Voices
The eight combinations of functions assigned to the LIVE CONTROL knobs are provided by default,
however, you can change the functions as desired from a variety of options.
1 Press the [ASSIGN] button to call up the LIVE CONTROL display.
2 Use the [A]/[B] buttons or the [1 ]–[8 ] buttons to select the number of the
functions you want to change.
3 Press the [I] (ASSIGN) button to call up the PARAMETER ASSIGN window.
4 Use the [2 ]–[4 ] buttons (for knob 1) and the [5 ]–[7 ] buttons (for
knob 2) to select the functions to be assigned.
For information on available functions, see pages 12–14.
5 Press the [EXIT] button to close the PARAMETER ASSIGN window.
6 If necessary, repeat steps 2–5 to change the functions for other numbers.
NOTE The settings here are maintained even when you turn off the power.
NOTE The settings here can be saved to a Registration Memory.
NOTE Depending on the panel settings or how you move the knob, you may not notice any change to the parameter value, or the knob may not work as
expected, even if you rotate it.
Editing Parameters Assigned to the LIVE CONTROL Knobs
2
2
2
3
4
12 PSR-S975/S775 Reference Manual
1
Voices
Assignable Knob Functions
Voice/Filter/Cut/R1,R2 Adjusts the cutoff frequency of the filter for the RIGHT 1 and 2 parts.
Rotating the knob to the right makes the sound brighter.
Voice/Filter/Res/R1,R2 Adjusts the resonance of the filter for the RIGHT 1 and 2 parts. Rotating
the knob to the right makes the sound more pronounced.
Voice/Filter/R1,R2 Adjusts the cutoff frequency of the filter and the resonance for the RIGHT
1 and/or 2 parts to change the timbre or tone of the sound.
Voice/Filter/R1
Voice/Filter/R2
Voice/Attack/R1,R2 Adjusts the length of time until the RIGHT 1 and/or 2 parts reach their
maximum level after the key is played. Rotating the knob to the right
increases it.
Voice/Attack/R1
Voice/Attack/R2
Voice/Release/R1,R2 Adjusts the length of time until the RIGHT 1 and/or 2 parts decay to
silence after the key is released. Rotating the knob to the right increases it.
Voice/Release/R1
Voice/Release/R2
Voice/Effect/Rev/R1,R2 Adjusts the Reverb depth for the RIGHT 1 and 2 parts. Rotating the knob
to the right makes it deeper.
Voice/Effect/Cho/R1,R2 Adjusts the Chorus depth for the RIGHT 1 and 2 parts. Rotating the knob
to the right makes it deeper.
Voice/Effect/Rev,Cho/R1 Adjusts both the Reverb depth and Chorus depth for the RIGHT 1 or 2
part. Rotating the knob to the right makes it deeper.
Voice/Effect/Rev,Cho/R2
Voice/Balance/R1,R2 Adjusts the volume balance between the RIGHT 1 and 2 parts. Rotating
the knob to the left increases the RIGHT 1 volume, while rotating it to the
right increases the RIGHT 2 volume.
Voice/Arp/Velocity Adjusts the volume of Arpeggio. Rotating the knob to the right increases
it.
Voice/Arp/GateTime Adjusts the length of each note of Arpeggio. Rotating the knob to the
right increases it.
Voice/Arp/UnitMultiply Adjust the speed of Arpeggio. Rotating the knob to the right makes it
faster.
Style/Filter/Cutoff Adjusts the cutoff frequency of the filter for the Style. Rotating the knob
to the right makes the sound brighter.
Style/Filter/Resonance Adjusts the resonance of the filter for the Style. Rotating the knob to the
right makes the sound more pronounced.
Style/Filter/Cutoff,Res Adjusts the cutoff frequency of the filter and the resonance for the Style to
change the timbre or tone of the sound.
Style/Effect/Reverb Adjusts the Reverb depth for the Style. Rotating the knob to the right
makes it deeper.
Style/Effect/Chorus Adjusts the Chorus depth for the Style. Rotating the knob to the right
makes it deeper.
Style/Effect/Rev,Cho Adjusts both the Reverb and Chorus depth for the Style. Rotating the
knob to the right makes it deeper.
PSR-S975/S775 Reference Manual 13
1
Voices
Style/Retrig/Rate Adjusts the Style Retrigger length. The first part of the current Style is
repeated in the specified length. Rotating the knob to the right decreases
it.
Style/Retrig/OnOff Turns the Style Retrigger function on/off. Rotating the knob to the right
turns it on, while rotating it to the left turns it off.
Style/Retrig/OnOff,Rate Turns the Style Retrigger function on/off and adjusts its length. Rotating
the knob to the left-most turns the function off; rotating it to the right
turns the function on and decreases the length.
Style/Track-Mute A Turns playback of the Style channels on/off. Rotating the knob to the left-
most position turns on only the Rhythm 2 channel, and the other channels
are turned off. By rotating the knob clockwise from that position, chan-
nels are turned on in the order of Rhythm 1, Bass, Chord 1, Chord 2, Pad,
Phrase 1, Phrase 2, and all channels are turned on when the knob reaches
to the right-most position. Turning the channels on/off lets you easily
change the rhythmic feel.
Style/Track-Mute B Turns playback of the Style channels on/off. Rotating the knob to the left-
most position turns on only the Chord 1 channel, and the other channels
are turned off. By rotating the knob clockwise from that position, chan-
nels are turned on in the order of Chord 2, Pad, Bass, Phrase 1, Phrase 2,
Rhythm 1, Rhythm 2, and all channels are turned on when the knob
reaches to the right-most position. Turning on/off the channels lets you
easily change the rhythmic feel.
MIC(Gt)/Effect/Reverb Adjusts the Reverb depth for the microphone or the guitar input sound.
Rotating the knob to the right makes it deeper.
MIC(Gt)/Effect/Chorus Adjusts the Chorus depth for the microphone or the guitar input sound.
Rotating the knob to the right makes it deeper.
MIC(Gt)/Effect/DSP Adjusts the DSP effect depth for the microphone or the guitar input
sound. Rotating the knob to the right makes it deeper.
NOTE Depending on the selected DSP type or how the microphone or the guitar is connected, the sound
may not be changed.
MIC(Gt)/Volume Adjusts the volume of the microphone or guitar sound input from the
[MIC/GUITAR INPUT] jack. Rotating the knob to the right increases it.
MIC/VH-Balance
(PSR-S975)
Adjusts the volume balance between the lead vocal (your own voice) and
Vocal Harmony. Rotating the knob to the left increases the lead vocal vol-
ume, while rotating it to the right increases the Vocal Harmony volume.
Audio/Volume Controls the Audio playback volume. As you rotate the knob to the right,
it increases.
AUX/Volume Controls the input volume from the [AUX IN] jack. Rotating the knob to
the right increases it.
Balance/Voice,Style Adjusts the volume balance between the Voice and Style playback. Rotat-
ing the knob to the left increases the Style volume, while rotating it to the
right increases the Voice volume.
Balance/Style,M.Pad Adjusts the volume balance between the Style and Multi Pad playback.
Rotating the knob to the left increases the Style volume, while rotating it
to the right increases the Multi Pad volume.
Balance/Audio,AUX Adjusts the volume balance between the Audio playback and sound input
from the [AUX IN] jack. Rotating the knob to the left increases the Audio
playback volume, while rotating it to the right increases the input volume
from the [AUX IN] jack.
14 PSR-S975/S775 Reference Manual
1
Voices
Balance/Song,Audio Adjusts the volume balance between the Song and Audio playback.
Rotating the knob to the left increases the Song volume, while rotating it
to the right increases the Audio (USB Audio Player) volume.
Balance/Song,AUX Adjusts the volume balance between the Song playback and sound input
from the [AUX IN] jack. Rotating the knob to the left increases the Song
playback volume, while rotating it to the right increases the input volume
from the [AUX IN] jack.
Balance/MIDI,AudioAUX Adjusts the volume balance between the playback of MIDI data (Song,
Style, Multi Pad) and Audio (USB Audio Player and input from the
[AUX IN] jack). Rotating the knob to the left increases the MIDI volume,
while rotating it to the right increases the Audio volume.
Filter/Voice,Style Adjusts the cutoff frequency of the filter and the resonance for all key-
board parts and the Style to change the timbre or tone of the sound.
Reverb/Voice,Style Adjusts the Reverb depth for all keyboard parts and the Style. Rotating
the knob to the right makes it deeper.
Chorus/Voice,Style Adjusts the Chorus depth for all keyboard parts and the Style. Rotating
the knob to the right makes it deeper.
Master Tempo Changes the tempo of the currently selected Style or Song. Rotating the
knob to the left makes it slower, while rotating it to the right makes it
faster. Setting range is from 50% of the default tempo value to 150%.
<No Assign> No function is assigned.
PSR-S975/S775 Reference Manual 15
1
Voices
The Voice Set function allows you to create your own Voices by editing some parameters of the existing
Voices. Once you’ve created a Voice, you can save it as a file to internal memory (USER drive) or a USB
flash drive for future recall.
1 Select the desired Voice (other than an Organ Flutes Voice).
Organ Flutes Voices have a different editing method than described here. For instructions on editing the
Organ Flutes Voices, see page 20.
2 In the Voice Selection display, press the [5 ] (VOICE SET) button of MENU 1 to call
up the VOICE SET display.
3 Use the TAB [E][F] buttons to call up the relevant setting page.
For information on the available parameters in each page, see the “Editable Parameters in the VOICE SET
Displays” on page 16.
4 As necessary, use the [A]/[B] buttons to select the item (parameter) to be edited and
edit the Voice by using the [1 ]–[8 ] buttons.
By pressing the [D] (COMPARE) button, you can compare the sound of the edited Voice with the original
(unedited) Voice.
5 Press the [I] (SAVE) button to save your edited Voice.
For details on the Save operation, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The settings will be lost if you select another Voice or turn off the power to the instrument without carrying out the Save operation.
Editing Voices (Voice Set)
5
4
3
16 PSR-S975/S775 Reference Manual
1
Voices
Editable Parameters in the VOICE SET Displays
The Voice Set parameters are organized into five different pages. The parameters in each page are described
separately, below.
NOTE The available parameters differ depending on the Voice.
COMMON Page
[1 ] VOLUME Adjusts the volume of the current edited Voice.
[2 ]/
[3 ]
TOUCH SENSE Adjusts the touch sensitivity (velocity sensitivity), or how greatly the vol-
ume responds to your playing strength.
DEPTH: Determines the velocity sensitivity, or how much the level of the
Voice changes in response to your playing strength (velocity).
OFFSET: Determines the amount by which received velocities are
adjusted for the actual velocity effect.
[4 ]/
[5 ]
PART OCTAVE Shifts the octave range of the edited Voice up or down in octaves. When
the edited Voice is used as any of the RIGHT 1–2 parts, the R1/R2 param-
eter is available; when the edited Voice is used as the LEFT part, the
LEFT parameter is available.
[6 ] MONO/POLY Determines whether the edited Voice is played monophonically or poly-
phonically. This setting can also be made from the VOICE EFFECT
[MONO] button on the panel.
[7 ] MONO TYPE Determines the behavior of the notes of decaying sounds, such as a guitar,
when they are played with legato with the edited Voice set to MONO
above.
When NORMAL is selected, the next note sounds after the previous note
is stopped. When LEGATO is selected, the sound of the previously played
note is maintained and only the pitch changes to that of the next note.
NOTE This parameter is unavailable for Super Articulation Voices, Organ Flute Voices and Drum/SFX Kit
Voices, and behaves the same as the NORMAL setting when these Voices are selected.
NOTE When LEGATO is selected, the behavior (other than what is described here) may be different from
NORMAL, depending on the panel settings.
[8 ] PORTAMENTO
TIME
Determines the pitch transition time when the edited Voice is set to
MONO above.
NOTE Portamento is a function that creates a smooth transition in pitch from the first note played on the
keyboard to the next.
0
64 127
64
127
0
64 127
64
127
Actual Velocity for
tone generator
Depth = 127 (twice)
Depth = 64 (normal)
Depth = 32 (half)
Depth = 0
TOUCH SENSE DEPTH
Changes to velocity curve according to
VelDepth (with Offset set to 64)
Received Velocity
(Actual KeyOn speed)
TOUCH SENSE OFFSET
Changes to velocity curve according to
VelOffset (with Depth set to 64)
Actual Velocity for
tone generator
Received Velocity
(Actual KeyOn
speed)
Offset = 96 (+64)
Offset = 127 (+127)
Offset = 64 (normal)
Offset = 32 (-64)
Offset = 0 (-127)
Depends
on offset
Depends
on offset
PSR-S975/S775 Reference Manual 17
1
Voices
CONTROLLER Page
MODULATION
The [MODULATION] wheel can be used to modulate the parameters below as well as the pitch (vibrato).
Here, you can set the degree to which the [MODULATION] wheel modulates each of the following
parameters.
SOUND Page
FILTER
Filter is a processor that changes the timbre or tone of a sound by either blocking or passing a specific
frequency range. The parameters below determine the overall timbre of the sound by boosting or cutting a
certain frequency range. In addition to making the sound either brighter or mellower, Filter can be used to
produce electronic, synthesizer-like effects.
[2 ] FILTER Determines the degree to which the [MODULATION] wheel modulates
the Filter Cutoff Frequency. For details about the filter, see below.
[3 ] AMPLITUDE Determines the degree to which the [MODULATION] wheel modulates
the amplitude (volume).
[5 ] LFO PMOD Determines the degree to which the [MODULATION] wheel modulates
the pitch, or the vibrato effect.
[6 ] LFO FMOD Determines the degree to which the [MODULATION] wheel modulates
the Filter modulation, or the wah effect.
[7 ] LFO AMOD Determines the degree to which the [MODULATION] wheel modulates
the amplitude, or the tremolo effect.
[1 ] BRIGHT.
(Brightness)
Determines the cutoff frequency or
effective frequency range of the fil-
ter (see diagram). Higher values
result in a brighter sound.
[2 ]HARMO.
(Harmonic Con-
tent)
Determines the emphasis given to
the cutoff frequency (resonance),
set in BRIGHT. above (see dia-
gram). Higher values result in a
more pronounced effect.
18 PSR-S975/S775 Reference Manual
1
Voices
EG
The EG (Envelope Generator) settings determine how the level of the
sound changes in time. This lets you reproduce many sound
characteristics of natural acoustic instruments—such as the quick
attack and decay of percussion sounds, or the long release of a
sustained piano tone.
VIBRATO
Vibrato is a quavering, vibrating sound effect that is produced by
regularly modulating the pitch of the Voice.
EFFECT/EQ Page
1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/PANEL SUSTAIN
[3 ] ATTACK Determines how quickly the sound reaches its maximum level after the
key is played. The lower the value, the quicker the attack.
[4 ] DECAY Determines how quickly the sound reaches its sustain level (a slightly
lower level than maximum). The lower the value, the quicker the decay.
[5 ] RELEASE Determines how quickly the sound decays to silence after the key is
released. The lower the value, the quicker the decay.
[6 ] DEPTH Determines the intensity of the Vibrato effect. Higher settings result in a
more pronounced Vibrato.
[7 ] SPEED Determines the speed of the Vibrato effect.
[8 ] DELAY Determines the amount of time that elapses between the playing of a key
and the start of the Vibrato effect. Higher settings increase the delay of the
Vibrato onset.
[1 ]/
[2 ]
REVERB
DEPTH
Adjusts the reverb depth.
[3 ]/
[4 ]
CHORUS
DEPTH
Adjusts the chorus depth.
[5 ] DSP ON/OFF Determines whether the DSP effect is on or off.
This setting can also be made from the VOICE EFFECT [DSP] button on
the panel.
[6 ] DSP DEPTH Adjusts the DSP depth.
If you want to re-select the DSP type, you can do so in the “2 DSP” menu
explained on page 19.
[7 ] PANEL
SUSTAIN
Determines the sustain level applied to the edited Voice when the VOICE
EFFECT [SUSTAIN] button on the panel is turned on.
Time
Level
Key on Key off
Sustain
Level
ATTACK DECAY RELEASE
Pitch
DELAY
SPEED
DEPTH
Time
PSR-S975/S775 Reference Manual 19
1
Voices
2 DSP
3 EQ
Determines the Frequency and Gain of the low and high EQ bands. Use the [2 ]–[4 ] buttons for
the low EQ band, and the [5 ]–[7 ] buttons for the high EQ band.
HARMONY/ARP Page
Same as the display called up via [FUNCTION] TAB [E] MENU 1 [B] HARMONY/ARPEGGIO
(pages 7–8), with the exception of the following points:
The details set via the [7 ] (DETAIL) buttons are shown on the top of the display.
The [D] (COMPARE) and [I] (SAVE) buttons are available (see steps 4–5 on page 15).
Disabling Automatic Selection of Voice Sets (Effects, etc.)
Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically
called up when a Voice is selected. However, you can also disable this feature by the operation in the relevant
display as explained below. For example, if you want to change the Voice yet keep the same effect, set the
EFFECT parameter to OFF (in the display explained below).
1 Call up the operation display.
[FUNCTION] TA B [ E] MENU 1 [F] VOICE SET FILTER
2 Use the [A]/[B] buttons to select a keyboard part.
[1 ]/
[2 ]
CATEGORY Selects the DSP effect category and type. Select a type after selecting a
category.
[3 ]/
[4 ]
TYPE
[6 ] VARIATION
ON/OFF
Turns the DSP Variation on or off for the selected Voice. This setting
can also be made from the VOICE EFFECT [DSP VARI.] button on the
panel.
[5 ]/
[7 ]
DETAIL Calls up a detailed setting display. Press the [5 ] button for editing
the standard parameter value, and the [7 ] button for editing the
Variation parameter value.
[2 ]
–[4 ]
PARAMETER Selects the DSP variation parameter to be set.
[5 ]
–[6 ]
VALUE Adjusts the value of the DSP variation parameter.
2
3
20 PSR-S975/S775 Reference Manual
1
Voices
3 Use the [4 ]–[7 ] buttons to turn each item for the selected Part on or off.
When the button is set to ON, the corresponding parameter settings are called up automatically together
with the Voice selection. For information on which parameters are linked to each item, see below.
The Organ Flute Voices can be edited by adjusting the footage levers, adding the attack sound, applying
effects and equalizer, etc.
1 Select the desired Organ Flutes Voice.
1-1 Press the [ORGAN FLUTES] button.
1-2 Press the [I] (PRESET) button to call up the Voice Selection display.
1-3 Press one of the [A]–[J] buttons to select the desired Voice.
2 Press the [5 ] (VOICE SET) button to call up the VOICE SET display.
3 Use the TAB [E][F] buttons to call up the relevant setting page (FOOTAGE, VOLUME/
ATTACK or EFFECT/EQ).
For information on the available parameters in each page, see pages 20–21.
4 Edit the Organ Flutes Voice.
5 Press the [I] (PRESET) button to call up the Organ Flutes Voice Selection display.
6 Save your edited Voice.
For instructions on the Save operation, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The settings will be lost if you select another Voice or turn off the power to the instrument without carrying out the Save operation.
FOOTAGE Page
Refer to the Owner’s Manual, chapter 1.
[4 ] VOICE Corresponds to the parameter settings of the COMMON, CONTROL-
LER, and SOUND pages.
[5 ] EFFECT Corresponds to the parameter settings of 1 and 2 in the EFFECT/EQ page.
[6 ] EQ Corresponds to the parameter settings of 3 in the EFFECT/EQ page.
[7 ] HARMONY/
ARPEGGIO
Corresponds to the HARMONY/ARP page.
Editing Organ Flutes Voices
PSR-S975/S775 Reference Manual 21
1
Voices
VOLUME/ATTACK Page
EFFECT/EQ Page
Same parameters as in the VOICE SET “EFFECT/EQ” page explained on page 18, except that PANEL
SUSTAIN is not available for the Organ Flutes Voices.
[1 ] VOLUME Adjusts the overall volume of the Organ Flutes. The longer the graphic
bar, the greater the volume.
[2 ]RESP.
(Response)
Affects both the attack and release (page 18) portion of the sound, increas-
ing or decreasing the response time of the initial swell and release, based
on the FOOTAGE controls. The higher the value, the slower the swell and
release.
[3 ]VIBRATO
SPEED
Determines the speed of the vibrato effect controlled by the Vibrato On/
Off ([F]/[G] buttons) and Vibrato Depth ([H] button).
[4 ] MODE The MODE control selects between two modes: FIRST and EACH. In the
FIRST mode, attack (percussive sound) is applied only to the first notes
played and held simultaneously; while the first notes are held, any subse-
quently played notes have no attack applied. In the EACH mode, attack is
applied equally to all notes.
[5 ]–
[7 ]
4’, 2 2/3’, 2’ These determine the attack sound volume of the Organ Flutes Voice. The
4’, 2-2/3’ and 2’ controls increase or reduce the volume of attack sound at
the corresponding footages. The longer the graphic bar, the greater the
attack sound volume.
[8 ] LENGTH Affects the attack portion of the sound producing a longer or shorter decay
immediately after the initial attack. The longer the graphic bar, the longer
the decay.
Same as the
FOOTAGE page.
22 PSR-S975/S775 Reference Manual
1
Voices
Installing Expansion Packs lets you add a variety of optional Voices and Styles to the “Expansion” folder in
the USER drive. This section covers the operations which may be necessary to add new contents to the
instrument.
Installing the Expansion Pack data from the USB Flash Drive
The file which contains the bundled Expansion Packs (“***.ppi” or “***.cpi”) to be installed to the
instrument is referred to as “Pack Installation file.” Only one Pack Installation file can be installed to the
instrument. If you want to install multiple Expansion Packs, bundle the packs together on your computer
by using the “Yamaha Expansion Manager” software. For information on how to use the software, refer to
the accompanying manual.
NOTICE
You will need to restart the instrument after installation has been completed. Make sure to save all data currently being edited before-
hand, otherwise it will be lost.
1 Connect the USB flash drive in which the desired Pack Installation file (“***.ppi” or
“***.cpi”) is saved to the [USB TO DEVICE] terminal.
2 Call up the operation display.
[FUNCTION] TAB [F] MENU 2 [F] PACK INSTALLATION
3 Use the [A]–[J] buttons to select the desired Pack Installation file.
4 Press the [6 ] (INSTALL) button.
5 Follow the on-display instructions.
This installs the selected Pack data to the “Expansion” folder in the USER drive.
Uninstalling the Expansion Pack data
You can uninstall the Expansion Pack data by carrying out the Reset operation for FILES & FOLDERS (see
page 134).
NOTICE
When you reset FILES & FOLDERS, not only the Expansion Pack data, but all other files and folders in the USER drive are deleted.
Adding New Contents—Expansion Packs
Song, Style or Registration Memory containing Expansion Voices or Styles
Song, Style or Registration Memory containing any Expansion Voices or Styles will not sound properly
or cannot be called up, if the Expansion Pack data does not exist in the instrument.
We recommend that you write down the name of the Expansion Pack when you create the data (Song,
Style or Registration Memory) using Expansion Voices or Styles, so that you can easily find and install
the Expansion Pack when necessary.
PSR-S975/S775 Reference Manual 23
1
Voices
Saving the Instrument Info File to the USB Flash Drive
If you use the “Yamaha Expansion Manager” software to manage the Pack data, you may need to retrieve the
Instrument Info file from the instrument as described below. For information on how to use the software,
refer to the accompanying manual.
1 Connect the USB flash memory to the [USB TO DEVICE] terminal.
NOTE Before using a USB flash drive, be sure to read “Connecting USB Devices” in the Owner’s Manual, chapter 10.
2 Call up the operation display.
[FUNCTION] TA B [ F] MENU 2 [G] SYSTEM TAB [ E] OWNER
3 Press the [D] (EXPORT INSTRUMENT INFO) button.
4 Follow the on-display instructions.
This saves the Instrument Info file to the root directory in the USB flash drive. The saved file is named
“PSR-S975_InstrumentInfo.n27” or “PSR-S775_InstrumentInfo.n27.
3
2
2
24 PSR-S975/S775 Reference Manual
Styles
Styles
Contents
Chord Fingering Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
• Chord Types Recognized in the Fingered Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Style Playback Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Memorizing Original Settings to One Touch Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Creating/Editing Styles (Style Creator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
• Basic Procedure for Creating a Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
• Realtime Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
• Step Recording (EDIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
• Style Assembly (ASSEMBLY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
• Editing the Rhythmic Feel (GROOVE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
• Editing Data for Each Channel (CHANNEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
• Making Style File Format Settings (PARAMETER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
• Editing the Rhythm Part of a Style (Drum Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Style Types (Characteristics)
The particular type of Style is indicated at the upper left of the Style name in the Style Selection display. The
defining characteristics of these Styles and their performance advantages are described below.
Pro: These Styles provide professional and exciting arrangements combined with perfect playability. The
resulting accompaniment exactly follows the chords of the player. As a result, your chord changes and
colorful harmonies are instantly transformed into lifelike musical accompaniment.
Session: These Styles provide even greater realism and authentic backing by mixing in original chord types
and changes, as well as special riffs with chord changes, with the Main sections. These have been pro-
grammed to add “spice” and a professional touch to your performances of certain songs and in certain
genres. Keep in mind, however, that the Styles may not necessarily be appropriate—or even harmonically
correct—for all songs and for all chord playing. In some cases for example, playing a simple major triad
for a country song may result in a “jazzy” seventh chord, or playing an on-bass chord may result in inap-
propriate or unexpected accompaniment.
Free Play: These Styles are characterized by rubato performance. You can perform freely with remarkably
expressive accompaniment, without being constrained by a strict tempo.
DJ: Indicates the DJ Style. For more information on DJ Styles, refer to the Owner’s Manual.
+Audio (PSR-S975): Indicates the Audio Style. For more information on Audio Styles, refer to the Owner’s
Manual.
For the Preset Style List, refer to the Data List on the website.
PSR-S975/S775 Reference Manual 25
2
Styles
The Chord Fingering type determines how chords are specified for Style playback. The type can be changed
from: [FUNCTION] TAB [E ] MENU 1 [A] SPLIT POINT/CHORD FINGERING TAB [F]
CHORD FINGERING.
NOTE “AI” stands for “Artificial Intelligence.”
Chord Fingering Types
SINGLE FINGER Makes it simple to produce orchestrated accompaniment using major, seventh,
minor and minor-seventh chords by pressing only one, two or three keys on the
Chord section of the keyboard.
MULTI FINGER Automatically detects Single Finger or Fingered chord fingerings, so you can
use either type of fingering without having to switch fingering types.
FINGERED Lets you specify the chord by pressing the notes making up a chord in the left
hand section of the keyboard when [ACMP] is turned on or the Left part is
turned on. For information on which notes to press for each chord, refer to
page 26, or use the Chord Tutor function on the right-half of this display.
FINGERED ON BASS Accepts the same fingerings as Fingered, but the lowest note played in the
Chord section of the keyboard is used as the bass note, allowing you to play
“on bass” chords. (In the Fingered type, the root of the chord is always used as
the bass note.)
FULL KEYBOARD Detects chords in the entire key range. Chords are detected in a way similar to
Fingered, even if you split the notes between your left and right hands—for
example, playing a bass note with your left hand and a chord with your right, or
by playing a chord with your left hand and a melody note with your right.
AI FINGERED Basically the same as Fingered, with the exception that less than three notes
can be played to indicate the chords (based on the previously played chord,
etc.).
AI FULL KEYBOARD This type is similar to Full Keyboard, with the exception that less than three
notes can be played to indicate the chords (based on the previously played
chord, etc.). 9th, 11th and 13th chords cannot be played.
Cm
C
Cm
7
C
7
For a major chord,
press the root key only.
For a minor chord,
simultaneously press
the root key and a black
key to its left.
For a seventh chord,
simultaneously press the
root key and a white key to
its left.
For a minor-seventh chord,
simultaneously press the root
key and both a white and black
key to its left.
26 PSR-S975/S775 Reference Manual
2
Styles
Chord Types Recognized in the Fingered Mode
* Notes in parentheses can be omitted.
Chord Name [Abbreviation] Normal Voicing* Display for root “C”
1+8 1+8 C1+8
1+5 1+5 C1+5
Major [M] 1+3+5 C
Sixth [6] 1+(3)+5+6 C6
Major seventh [M7] 1+3+(5)+7 CM7
Major seventh flatted fifth [M7b5] 1+3+b5+7 CM7(b5)
Major seventh add sharp eleventh [M7(#11)] 1+(2)+3+#4+5+7 CM7(#11 )
Add ninth [(add9)] 1+2+3+5 Cadd9
Major seventh ninth [M7_9] 1+2+3+(5)+7 CM7(9)
Sixth ninth [6_9] 1+2+3+(5)+6 C6(9)
Flatted fifth [(b5)] 1+3+b5Cb5
Augmented [aug] 1+3+#5Caug
Seventh augmented [7aug] 1+3+#5+b7 C7aug
Major seventh augmented [M7aug] 1+(3)+#5+7 CM7aug
Minor [m] 1+b3+5 Cm
Minor sixth [m6] 1+b3+5+6 Cm6
Minor seventh [m7] 1+b3+(5)+b7Cm7
Minor seventh flatted fifth [m7b5] 1+b3+b5+b7Cm7(b5)
Minor add ninth [m(9)] 1+2+b3+5 Cm add9
Minor seventh ninth [m7(9)] 1+2+b3+(5)+b7 Cm7(9)
Minor seventh eleventh [m7(11)] 1+(2)+b3+4+5+(b7) Cm7(11)
Minor major seventh flatted fifth [mM7b5] 1+b3+b5+7 CmM7(b5)
Minor major seventh [mM7] 1+b3+(5)+7 CmM7
Minor major seventh ninth [mM7(9)] 1+2+b3+(5)+7 CmM7(9)
Diminished [dim] 1+b3+b5Cdim
Diminished seventh [dim7] 1+b3+b5+6 Cdim7
Seventh [7] 1+3+(5)+b
7C7
Se
venth
suspended fourth [7sus4] 1+4+5+b7 C7sus4
Seventh ninth [7(9)] 1+2+3+(5)+b7C7(9)
Seventh add sharp eleventh [7(#11)] 1+(2)+3+#4+5+b7C7(#11)
Seventh add thirteenth [7(13)] 1+3+(5)+6+b7C7(13)
Seventh flatted fifth [7b5] 1+3+b5+b7C7(b5)
Seventh flatted ninth [7(b9)] 1+b2+3+(5)+b7C7(b9)
Seventh add flatted thirteenth [7(b13)] 1+3+5+b6+b7C7(b13)
Seventh sharp ninth [7(#9)] 1+#2+3+(5)+b7C7(#9)
Suspended fourth [sus4] 1+4+5 Csus4
One plus two plus five [sus2] 1+2+5 Csus2
cancel 1+b2+2 Cancel
PSR-S975/S775 Reference Manual 27
2
Styles
The instrument has a variety of settings for Style playback which can be accessed in the display below.
1 Call up the operation display.
[FUNCTION] TA B [ E] MENU 1 [G] STYLE SETTING
2 Use the [B]/[C] and [1 ]–[8 ] buttons for each setting.
Style Playback Related Settings
[B] OTS LINK
TIMING
This applies to the OTS Link function. This parameter determines the tim-
ing in which the One Touch Settings change with the MAIN VARIATION
[A]–[D] change. (The [OTS LINK] button must be on.)
REAL TIME: One Touch Setting is immediately called up when you
press a MAIN VARIATION button.
NEXT BAR: One Touch Setting is called up at the next measure, after
you press a MAIN VARIATION button.
[C] STOP ACMP When [ACMP] is turned on and [SYNC START] is off, you can play
chords in the chord section of the keyboard with the Style stopped, and
still hear the accompaniment chord. In this condition—called “Stop
Accompaniment”—any valid chord fingerings are recognized and the
chord root/type are shown in the display. Here, you can determine whether
the chord played in the chord section will sound or not in the Stop Accom-
paniment status.
OFF: The chord played in the chord section will not sound.
STYLE: The chord played in the chord section will sound via the Voices
for the Pad channel and the Bass channel of the selected Style.
FIXED: The chord played in the chord section will sound via the speci-
fied Voice, regardless of the selected Style.
NOTE When the selected Style contains MegaVoices, unexpected sounds may result when this is set to
“STYLE.”
NOTE When you record a Song, the chord detected by playing the Stop Accompaniment can be recorded
regardless of the setting here. Please note that both the sounding Voice and chord data is recorded
when set to “STYLE,” and only the chord data is recorded when set to “OFF” or “FIXED.”
28 PSR-S975/S775 Reference Manual
2
Styles
[1 ]/
[2 ]
DYNAMICS
CONTROL
This determines how the Style playback volume changes depending on
the playing strength.
OFF: The volume is kept the same regardless of playing strength.
NARROW: The volume changes over a narrow range.
MEDIUM: The volume changes over a medium range.
WIDE: The volume changes over a wide range.
[3 ]/
[4 ]
SYNCHRO
STOP WINDOW
This determines how long you can hold a chord before the Synchro Stop
function is automatically cancelled. When the [SYNC STOP] button is
turned on and this is set to a value other than “OFF,” this automatically
cancels the Synchro Stop function if you hold a chord for longer than the
time set here. This conveniently resets Style playback control to normal,
letting you release the keys and still have the Style play. In other words, if
you release the keys sooner than the time set here, the Synchro Stop func-
tion works.
[5 ]/
[6 ]
SECTION SET Determines the default section that is automatically called up when select-
ing different Styles (when Style playback is stopped). When set to “OFF”
and Style playback is stopped, the active section is maintained even if the
different Style is selected. When any of the MAIN A–D sections is not
included in the Style data, the nearest section is automatically selected.
For example, when MAIN D is not contained in the selected Style, MAIN
C will be called up.
[7 ] TEMPO This determines whether the tempo setting of the Style changes or not
when you change Styles.
LOCK: The previous tempo setting is always maintained.
HOLD: During Style playback, the previous tempo setting is maintained.
When Style playback is stopped, the tempo changes to that of the
default tempo for the selected Style.
RESET: The tempo always changes to that of the default tempo for the
selected Style.
[8 ] PART ON/OFF This determines whether the Style Channel On/Off status changes or not
when you change Styles.
LOCK: The Channel On/Off status of the previous Style is always main-
tained.
HOLD: During Style playback, the Channel On/Off status of the previ-
ous Style is maintained. When Style playback is stopped, all Style
Channels are set to On.
RESET: All Style Channels are set to On.
PSR-S975/S775 Reference Manual 29
2
Styles
You can memorize your original panel settings to a One Touch Setting. The newly created One Touch Setting
will be saved in the USER drive or a USB flash drive as a Style, and you can call up the One Touch Setting as
a part of the Style.
1 Select the desired Style to memorize your One Touch Setting.
2 Make the desired panel settings, such as those for Voices and effects.
3 Press the [MEMORY] button in the REGISTRATION MEMORY section.
The REGISTRATION MEMORY CONTENTS display appears. However you do not need to make any
settings here, since the On/Off settings in this display do not affect the One Touch Setting function.
4 Press one of the ONE TOUCH SETTING [1]–[4] buttons to which you wish to memorize
your panel settings.
A message appears. If you are sure you want to memorize the current settings to the selected button, press
the [F] (YES) button. If you want to change the settings, press the [G] (NO) button, then repeat steps 2–4
as necessary.
NOTE For ONE TOUCH SETTING buttons to which your original panel settings have not been memorized, the OTS settings of the original Style will be main-
tained.
5 Press the [F] (YES) button to call up the Style Selection display and save the One
Touch Setting as a Style.
For instructions on the Save operation, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The memorized panel settings (One Touch Settings) will be lost if you change the Style or turn the power off without carrying out the Save
operation.
Memorizing Original Settings to One Touch Setting
30 PSR-S975/S775 Reference Manual
2
Styles
A Style is made up of the different Sections (Intro, Main, Ending, etc.) and each Section has separate
channels (rhythm pattern, bass line, chord backing, pad, or phrase, each of which is referred to as a “Source
Pattern”). With the Style Creator function, you can create an original Style by separately recording the
channels, or by copying pattern data from other existing Styles.
Basic Procedure for Creating a Style
1 Select the desired Style to be used as the basis for the new Style.
2 Call up the Style Creator display.
[FUNCTION] TAB [F] MENU 2 [A] STYLE CREATOR
3 From the BASIC page, select a Section.
(If the RECORD display is shown in the lower half section of the display, press the [EXIT] button.) Press
the [A] button to select “1 SECTION,” then use the [3 ]/[4 ] buttons to select a Section.
Carry out the following operations as necessary.
If you create a Style entirely from scratch, press the [C] (NEW STYLE) button to call up an empty new
Style.
For the current Section, select the pattern length via the [5 ]/[6 ] buttons. After selecting, press
the [D] (EXECUTE) button to actually enter the specified length.
Note that if an Audio Style is selected as the basic data (PSR-S975), changing the pattern length deletes
the corresponding Audio part.
For the entire current Style, use the [A]/[B] buttons to select “2 TEMPO/BEAT,” then set the Tempo via
the [3 ]/[4 ] buttons, and the Time Signature via the [5 ]/[6 ] buttons.
NOTE Even when you are editing an existing Style, changing the Time Signature (BEAT) clears the data from all sections, and you will need to create the Style
from scratch.
Creating/Editing Styles (Style Creator)
(PSR-S975) Limitations on the Audio part:
If you select a preset Audio Style as starting data, the Audio part is to be used as is. The Audio part can-
not be deleted, edited and created from scratch.
The created Style containing the Audio part can be used only via an instrument that supports Audio
Styles as well as the SFF GE format.
The Audio part cannot be copied from another Style or Section in the ASSEMBLY page. If you want to
use a specific Audio part, make sure to select the corresponding Audio Style before calling up the Style
Creator display.
PSR-S975/S775 Reference Manual 31
2
Styles
4 Create the Source Pattern for each channel.
Realtime Recording on the BASIC page (page 32)
Lets you record the Style by simply playing the keyboard.
Step Recording on the EDIT page (page 36)
Lets you enter each note individually.
Style Assembly on the ASSEMBLY page (page 36)
Lets you copy various patterns from other preset Styles or Styles you have already created.
5 Edit the already recorded channel data.
Editing the channel data on the GROOVE (page 38), CHANNEL (page 40), and EDIT (page 36)
pages
Lets you change the rhythmic feel, quantizing and velocity, etc.
Editing the SFF parameters on the PARAMETER page (page 41)
Lets you edit the SFF (Style File Format) related parameters of the already recorded channels.
Editing the rhythm part on the BASIC page by using the Drum Setup function (page 46)
Lets you edit the rhythm part of the Style, such as changing the sounds of the individual instruments.
6 Repeat steps 3–5 as desired.
7 Press the [I] or [J] (SAVE) button on any of the pages to save the created Style.
For instructions, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The created Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save opera-
tion.
32 PSR-S975/S775 Reference Manual
2
Styles
Realtime Recording
In the BASIC page, you can record your original rhythm pattern from the keyboard.
Recording Rhythm Channels 1–2
The procedure below applies to step 4 in the Basic Procedure on page 31.
(PSR-S975) If you select an Audio Style as the basic data:
Playback of the Audio part can be turned on or off via the [H] (AUDIO PART) button, but it cannot be
edited or deleted. Note that the rhythm pattern of this part will be used in the new Style you intend to
create. If you want to create a rhythm phrase in addition to the Audio part, follow the steps below.
1 From the BASIC page, while holding down the [F] (REC CHANNEL) button, press the
[1 ] or [2 ] button to select the desired channel as the recording target.
A Rhythm channel can be selected as the recording target no matter whether already recorded data is
included or not. If already recorded data is included in the selected channel, you can record notes
additionally to the existing data.
Realtime Recording Characteristics in the Style Creator
•Loop Recording
Style playback repeats the rhythm patterns of several measures in a “loop,” and Style recording is also
done using loops. For example, if you start recording with a two-measure MAIN section, the two
measures are repeatedly recorded. Notes that you record will play back from the next repetition (loop),
letting you record while hearing previously recorded material.
Overdub Recording
This method records new material to a channel already containing recorded data, without deleting the
original data. In Style recording, the recorded data is not deleted, except when using functions such as
Rhythm Clear (page 33) and Delete (pages 33, 35). For example, if you start recording with a two-
measure MAIN section, the two measures are repeated many times. Notes that you record will play
back from the next repetition, letting you overdub new material to the loop while hearing previously
recorded material. When creating a Style based on an existing internal Style, overdub recording is
applied only to the rhythm channels. For all other channels (except rhythm), you need to delete the
original data before recording.
PSR-S975/S775 Reference Manual 33
2
Styles
2 If necessary, select a Voice then practice the rhythm pattern to be recorded.
Press the [1 ] or [2 ] button (selected channel) to call up the Voice Selection display then select the
desired Voice such as a Drum Kit. After selecting, press the [EXIT] button to return to the original Style
Creator display. With the selected Voice, practice the rhythm pattern to be recorded.
Available Voices for recording
For the RHY1 channel, any except the Organ Flutes Voices can be used for recording.
For the RHY2 channel, only Drum/SFX Kits can be used for recording.
NOTE For information on which key to play for each Drum/SFX sound, refer to the “Drum/SFX Kit List” in the Data List on the website.
3 Press the STYLE CONTROL [START/STOP] button to start recording.
As the already recorded data plays back, use the [1 ]–[8 ] buttons to turn each channel on or off as
desired. If you selected an Audio Style as starting data (PSR-S975), turn the Audio part on or off via the
[H] button.
If necessary, you can delete channel data. While holding down the [J] (DELETE) button, press one of the
[1 ]–[8 ] (desired channel) buttons.
4 As soon as loop playback returns to the first beat in the first measure, start playing
the rhythm pattern to be recorded.
If the rhythm is difficult to play in real time, break it up into individual parts and play each separately as
the playback loops, as shown in the example below.
Deleting mistakenly recorded notes (Rhythm Clear)
If you make a mistake or play any wrong notes, you can delete those specific notes. While holding down
the [E] (RHY CLEAR) button, press the corresponding key on the keyboard.
5 Press the [START/STOP] button to stop playback.
If you want to add more notes, press the [START/STOP] button again to continue recording.
6 Press the appropriate [1 ] or [2 ] button to disable recording.
NOTICE
The created Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation
(step 7 on page 31).
Loop 1st round
Bass Drum
Loop 3rd round
Bass Drum
Snare Drum
Hi-Hat
Loop 2nd round
Bass Drum
Snare Drum
34 PSR-S975/S775 Reference Manual
2
Styles
Recording to the Bass, Chord 1–2, Pad and Phrase 1–2 Channels
The procedure below applies to step 4 in the Basic Procedure on page 31.
1 From the BASIC page, while holding down the [F] (REC CHANNEL) button, press one
of the [3 ]–[8 ] buttons to select the desired channel as the recording target.
If a preset Style is selected, a confirmation message appears, prompting you whether or not to delete the
already recorded data of the selected channel. Press the [G] (YES) button to delete data and the selected
channel is specified as the recording target. Note that channel data other than the Rhythm channels of the
preset Style cannot be overdubbed.
2 If necessary, select a Voice then practice the bass line, chord backing, or phrase to be
recorded.
Press one of the [3 ]–[8 ] buttons (selected channel) to call up the Voice Selection display then select
the desired Voice. After selecting, press the [EXIT] button to return to the original display. With the
selected Voice, practice the phrase or chord backing to be recorded.
Available Voices for recording
Any except for the Organ Flutes Voice/Drum Kit/SFX kit Voices can be used for recording.
Record a phrase in CM7 (for playing appropriate notes while chords change during performance)
Rules when recording a Main or Fill
With the default initial settings, the Source Root/Chord (page 42) is set to CM7. This means that you
should record a Source Pattern using a CM7 scale, which will change according to the chords you
specify during normal performance. Record a bass line, phrase or chord backing which you want to hear
when CM7 is specified. See below for details.
Use only the CM7 scale tones when recording the BASS and PHRASE channels (i.e., C, D, E, G, A,
and B).
Use only the chord tones when recording the CHORD and PAD channels (i.e., C, E, G, and B).
If you observe this rule, Style playback notes are appropriately converted depending on the chord
changes you make during your performance.
Rules when recording an Intro or Ending
These Sections are designed assuming that the chord is not changed during playback. This is why you
need not observe the rule for Main and Fill-in Sections described above, and you can create special
chord progressions when recording. However, follow the rules below since the Source Root/Chord is set
to CM7.
When recording the Intro, make sure that the recorded phrase leads properly into a C scale.
When recording the Ending, make sure that the recorded phrase begins with or properly follows a C
scale.
CRC CRC
C = Chord note
C, R = Recommended note
PSR-S975/S775 Reference Manual 35
2
Styles
Set the Source Root/Chord if necessary
Although the Source Root/Chord is set to CM7 as described above, you can change this to any desired
key or chord. Use the TAB [E][F] buttons to call up the PARAMETER page, and set the PLAY ROOT
and CHORD to the favorite or desired Root and Chord type. Keep in mind that when you change the
Source Chord from the default CM7 to another chord, the chord notes and recommended notes will also
change. For details, refer to page 42.
3 Press the STYLE CONTROL [START/STOP] button to start recording.
Since already recorded data plays back, use the [1 ]–[8 ] buttons to turn on or off each channel as
desired. If you selected an Audio Style as starting data (PSR-S975), turn on or off the Audio part via the
[H] button.
If necessary, you can delete channel data. While holding down the [J] (DELETE) button, press one of the
[1 ]–[8 ] (desired channel) buttons.
4 As soon as loop playback returns to the first beat in the first measure, start playing
the bass line, chord backing or phrase to be recorded.
5 Press the [START/STOP] button to stop playback.
If you want to add more notes, press the [START/STOP] button again to continue recording.
To hear the playback sound of the already recorded channels with another Source Root/Chord:
1) Use the TAB [E][F] buttons to call up the PARAMETER page.
2) Press the [F] (REC CHANNEL) button to call up the RECORD display, then use the [1 ]–[8 ]
buttons to turn the desired channel ON/OFF.
3) Press the STYLE CONTROL [START/STOP] button to start playback.
4) On the PARAMETER page, set the PLAY ROOT and CHORD to the desired Chord root and Chord
type.
The above operation lets you hear how the Source Pattern is played back via chord changes during normal
performance.
6 Press the appropriate [3 ]–[8 ] button to disable recording.
NOTICE
The created Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation
(step 7 on page 31).
36 PSR-S975/S775 Reference Manual
2
Styles
Step Recording (EDIT)
This section applies to step 4 of the Basic Procedure on page 31. After selecting a Section and make other
settings on the BASIC page, call up the STEP RECORD display via the instructions below, then carry out
Step Recording.
1) From the BASIC page, while holding down the [F] (REC CHANNEL) button, press one of the [1 ]–
[8 ] buttons to select the desired channel as the recording target.
2) Use the TAB [F] button to call up the EDIT page.
3) If “SYS/EX.” is shown at the position corresponding to the [F] button, press the [F] button to call up the
Channel Edit display.
4) Press the [G] (STEP REC) button to call up the STEP RECORD display.
The Step Recording procedure in the Style Creator is essentially same as that in Song Creator (pages 59–62),
with the exception of the following points:
Unlike in Song Creator, the “End” mark position cannot be changed in the Style Creator. This is because set-
ting the Pattern Length on the BASIC page determines the “End” mark position. For example, if you select a
Section of four measures or you set the Pattern Length to “4” on the BASIC page, the “End” mark position is
automatically set to the end of the fourth measure, and cannot be changed.
Unlike in Song Creator, a Recording channel can be set on the BASIC page. It cannot be set on the EDIT
page.
Unlike in Song Creator, Chord and Lyrics data cannot be entered. This is because such data is not necessary
for Style playback.
For instructions on Step Recording, refer to pages 59–62. For information on the EDIT page (called as Event
List display in Song Creator), refer to page 72.
Style Assembly (ASSEMBLY)
This allows you to copy channel data as a Source Pattern from another preset Style to the currently created
Style. Use this function if you find a favorite rhythm pattern, bass line, chord backing or phrase from another
Style.
The instructions below apply to step 4 of the Basic Procedure on page 31. After selecting a Section and make
other settings on the BASIC page, carry out the instructions below.
NOTE (PSR-S975) An Audio part cannot be copied from another Style.
NOTE (PSR-S975) If you select an Audio Style as starting data, the Audio part cannot be replaced with different data.
1 Call up the operation display.
[FUNCTION] TAB [F] MENU 2 [A] STYLE CREATOR TAB [E][F] ASSEMBLY
2 If necessary, select the Section to be edited.
Even if the Section to be edited has already been selected on the BASIC page, you can change the Section
also on this page. Press the desired Section button on the panel to call up the SECTION window, then
press the [8 ] (OK) button to actually enter the selection. If you want to select a fill-in section (which has
no panel button), press any one of the Section buttons and use the [6 ]/[7 ] buttons to select a fill-
in, then press the [8 ] (OK) button.
PSR-S975/S775 Reference Manual 37
2
Styles
NOTE Intro 4 and Ending 4 can be selected on the display then created as your original Style although they are not available on the panel.
3 Replace the Source Pattern of the specific channel with that of another Style.
3-1 Select the desired channel to be replaced via the [A]–[D] and [F]–[I] buttons.
3-2 Press the same button of the selected channel to call up the Style Selection display.
3-3 Select the desired Style, then press the [EXIT] button to return to the original display.
3-4 Select the Section and Channel of the selected Style via the [2 ]–[5 ] buttons.
3-5 Confirm the sound with the newly assigned Source Pattern by pressing the STYLE CON-
TROL [START/STOP] button to play back the Style.
4 As desired, repeat step 3 for another channel.
NOTICE
The created Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation
(step 7 on page 31).
Playing the Style During Style Assembly
You can play back the Style while you are assembling a Style, and the playback method can be selected.
In the ASSEMBLY page, use the [6 ]/[7 ] (PLAY TYPE) buttons to select the type.
•SOLO: Plays back the selected channel in the ASSEMBLY page. Any channels set to REC in the
RECORD display on the BASIC page are played back simultaneously.
•ON: Plays back the selected channel in the ASSEMBLY page. Any channels set to other than OFF in
the RECORD display on the BASIC page are played back simultaneously.
OFF: Mutes the selected channel in the ASSEMBLY page.
3-1,
3-2
3-4
3-3
[A]–[D],
[F]–[I]
buttons
38 PSR-S975/S775 Reference Manual
2
Styles
Editing the Rhythmic Feel (GROOVE)
By changing the timing of all the notes and velocities, you can edit the rhythmic feel for each channel of the
current Section selected on the BASIC page or the panel button. The instructions below apply to step 5 of the
Basic Procedure on page 31.
1 In the GROOVE page, use the [A]/[B] buttons to select the edit menu, then edit the
data by using the [1 ]–[8 ] buttons.
1 GROOVE
This lets you add swing to the music or change the “feel of the beat by making subtle shifts in the timing
(clock) of the Style. The Groove settings are applied to all channels of the Section selected on the BASIC
page.
[1 ]/
[2 ]
ORIGINAL
BEAT
Specifies the beats to which Groove timing is to be applied. In other
words, if “8 BEAT” is selected, Groove timing is applied to 8th notes; if
“12 BEAT” is selected, Groove timing is applied to 8th-note triplets.
[3 ]/
[4 ]
BEAT
CONVERTER
Actually changes the timing of the beats (specified in the ORIGINAL
BEAT parameter above) to the selected value. For example, when ORIGI-
NAL BEAT is set to “8 BEAT” and BEAT CONVERTER is set to “12,
all 8th notes in the section are shifted to 8th-note triplet timing. The
“16A” and “16B” Beat Converter which appear when ORIGINAL BEAT
is set to “12 BEAT” are variations on a basic 16th-note setting.
[5 ]/
[6 ]
SWING Produces a “swing” feel by shifting the timing of the back beats, depend-
ing on the ORIGINAL BEAT parameter above. For example, if the speci-
fied ORIGINAL BEAT value is “8 BEAT”, the Swing parameter will
selectively delay the 2nd, 4th, 6th, and 8th beats of each measure to create
a swing feel. The settings “A” through “E” produce different degrees of
swing, with “A” being the most subtle and “E” being the most pro-
nounced.
[7 ]/
[8 ]
FINE Selects a variety of Groove “templates” to be applied to the selected sec-
tion. The “PUSH” settings cause certain beats to be played early, while
“HEAVY” settings delay the timing of certain beats. The numbered set-
tings (2, 3, 4, 5) determine which beats are to be affected. All beats up to
the specified beat—but not including the first beat—will be played early
or delayed (for example, the 2nd and 3rd beats, if “3” is selected). In all
cases, “A” types produce minimum effect, “B” types produce medium
effect, and “C” types produce maximum effect.
1
1
2
PSR-S975/S775 Reference Manual 39
2
Styles
2 DYNAMICS
This changes the velocity/volume (or accent) of certain notes in the Style playback. The Dynamics settings
are applied to each channel or all channels of the Section selected on the BASIC page.
2 Press the [D] (EXECUTE) button to actually enter the edits for each display.
The values which are shown in the STRENGTH, EXPAND/CMP. and BOOST/CUT parameters are
expressed as a percentage of the last set value.
After the operation is completed, this button changes to “UNDO,” letting you restore the original data if
you are not satisfied with the Groove or Dynamics results. The Undo function only has one level; only the
previous operation can be undone.
NOTICE
The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation
(step 7 on page 31).
[1 ]/
[2 ]
CHANNEL Selects the desired channel (part) to which Dynamics is to be applied. The
selected channel is shown at the upper left of the display.
[3 ]/
[4 ]
ACCENT TYPE Determines the type of accent applied—in other words, which notes in the
part(s) are emphasized with the Dynamics settings.
[6 ] STRENGTH Determines how strongly the selected Accent Type (above) will be
applied. The higher the value, the stronger the effect.
[7 ] EXPAND/CMP. Expands or compresses the range of velocity values. Values higher than
100% expand the dynamic range, while values lower than 100% compress
it.
[8 ] BOOST/CUT Boosts or cuts all velocity values in the selected section/channel. Values
above 100% boost the overall velocity, while values below 100% reduce
it.
40 PSR-S975/S775 Reference Manual
2
Styles
Editing Data for Each Channel (CHANNEL)
You can edit recorded data for each channel of the current Section selected on the BASIC page or via the
panel buttons. The instructions below apply to step 5 of the Basic Procedure on page 31.
1 In the CHANNEL page, use the [A]/[B] buttons to select the edit menu.
1 QUANTIZE
Same as in the Song Creator (page 70), with the exception of the two additional available parameters
below.
2 VELOCITY CHANGE
Boosts or cuts the velocity of all notes in the specified channel, according to the percentage specified here.
3 BAR COPY
This function allows data to be copied from one measure or group of measures to another location within
the specified channel.
4 BAR CLEAR
This function clears all data from the specified range of measures within the selected channel.
5 REMOVE EVENT
This function lets you remove specific events from the selected channel.
2 Use the [1 ]/[2 ] (CHANNEL) buttons to select the channel to be edited.
The selected channel is shown at the upper left of the display.
3 Use the [4 ]–[8 ] buttons to edit the data.
4 Press the [D] (EXECUTE) button to actually enter the edits for each display.
After the operation is completed, this button changes to “UNDO,” letting you restore the original data if
you are not satisfied with the results of the edit. The Undo function only has one level; only the previous
operation can be undone.
NOTICE
The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation
(step 7 on page 31).
[4 ] TOP Specifies the first (TOP) and last (LAST) measures in the region to be
copied.
[5 ]LAST
[6 ] DEST Specifies the first measure of the destination location, to which the data is
to be copied.
5
23
1
4
Eighth notes with swing
Sixteenth notes with swing
PSR-S975/S775 Reference Manual 41
2
Styles
Making Style File Format Settings (PARAMETER)
The Style File Format (SFF) combines all of Yamaha’s auto accompaniment (Style playback) know-how into
a single unified format. Setting the SFF related parameters determines how the original notes are converted to
the actual sounded notes based on the chord you specify in the Chord area of the keyboard. The conversion
flow is shown below.
The instructions below apply to step 5 of the Basic Procedure on page 31.
NOTE The parameters you can set here are compatible with the SFF GE format. This is why the Style files created on this instrument can be played back only on
instruments which are compatible with SFF GE.
1 In the PARAMETER page, use the [A]/[B] buttons to select the edit menu.
For details of the edit menu, see page 42.
Set these parameters
before recording.
Set these parameters
after recording.
Source Pattern settings
Source Root
Source Chord
Determines what key and what chord type are used for playing.
Note Conversion from the Source Pattern
NTR (Conversion via Chord Root change) …page 43
NTT (Conversion via Chord Type change) … page 43
Chord changes during normal performance
Octave Setting of the Converted Notes
High Key (Upper octave limit of Note Transposition)
Note Limit (Note range between the highest and lowest notes)
Others
RTR (How the note pitch changes in response to chord changes)
Actual Sounded Notes
23
1
42 PSR-S975/S775 Reference Manual
2
Styles
2 Use the [1 ]/[2 ] (CHANNEL) buttons to select the channel to be edited.
The selected channel is shown at the upper left of the display.
3 Use the [3 ]–[8 ] buttons to edit the data.
For details on editable parameters, see pages 42–45.
NOTICE
The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation
(step 7 on page 31).
1 SOURCE (PLAY) ROOT/CHORD
IMPORTANT
The parameters here should be set before recording. If you change the settings after recording, the appropriate note conversion cannot
be done even when you specify various chord types.
Before recording, you should set these parameters which determine what key is used for playing when you
record the Source Pattern to the Bass, Chord, Pad or Phrase channel. If you set this to “Fm7,” your
recorded original phrase (Source Pattern) will be triggered by specifying Fm7 during normal performance.
CM7 (Source Chord Root = C and Source Chord Type = M7) is set by default. Depending on the settings
here, the playable notes (chord notes and recommended scale notes) will differ. For details, see below.
NOTE When the parameters for the selected channel are set to NTR: ROOT FIXED, NTT: BYPASS, and NTT BASS: OFF, the parameters here are changed to
“PLAY ROOT” instead of “SOURCE ROOT.” In this case, you can hear the resulting sound while you change the Chord Root/Type during playback.
NOTE The settings here are not applied when NTR is set to GUITAR.
When the Source Root is C:
C = Chord notes
C, R = Recommended notes
PSR-S975/S775 Reference Manual 43
2
Styles
2 NTR/NTT
The settings here determine how the original notes of the Source Pattern are converted in response to the
Chord change during normal performance.
NOTE Since the Rhythm channels should not be affected by chord changes, make sure that the parameters are set to NTR: ROOT FIXED, NTT: BYPASS, and NTT
BASS: OFF. In this case, “SOURCE ROOT” is changed to “PLAY ROOT.”
NTR (Note Transposition Rule)
NTT (Note Transposition Table)
When NTR is set to ROOT TRANS or ROOT FIXED
[3 ]/
[4 ]
NTR (Note
Transposition
Rule)
Determines the relative position of the root note in the chord, when con-
verted from the Source Pattern in response to chord changes. Refer to the
list below.
[5 ]–
[7 ]
NTT (Note
Transposition
Table)
Sets the note transposition table for the source pattern. Refer to the list
below.
[8 ]NTT BASS ON/
OFF
The channel for which this is set to ON will be played back by the bass
root note, when the on-bass chord is recognized by the instrument. When
NTR is set to GUITAR and this parameter is set to ON, only the note
which is assigned to bass will be played back by the bass root note.
ROOT TRANS
(Root Transpose)
When the root note is transposed, the interval
between notes is maintained. For example, the
notes C3, E3 and G3 in the key of C become F3,
A3 and C4 when they are transposed to F. Use this
setting for channels that contain melody lines.
ROOT FIXED The note is kept as close as possible to the previ-
ous note range. For example, the notes C3, E3 and
G3 in the key of C become C3, F3 and A3 when
they are transposed to F. Use this setting for chan-
nels that contain chord parts.
GUITAR This is exclusively for transposing guitar accompaniment. Notes are trans-
posed to approximate the chords played with natural guitar fingering.
BYPASS When NTR is set to ROOT FIXED, the transposition table used does not do
any note conversion. When NTR is set to ROOT TRANS, the table used
only converts the notes by maintaining the pitch relationship between notes.
MELODY Suitable for melody line transposition. Use this for melody channels such as
Phrase 1 and Phrase 2.
CHORD Suitable for chordal parts transposition. Use this for the Chord 1 and Chord
2 channels, especially when they contain piano or guitar-like chordal parts.
MELODIC MINOR When the played chord changes from a major to a minor chord, this table
lowers the third interval in the scale by a semitone. When the chord changes
from a minor to a major chord, the minor third interval is raised by a semi-
tone. Other notes are not changed. Use this for melody channels of Sections
which respond only to major/minor chords, such as Intros and Endings.
MELODIC MINOR 5th In addition to the Melodic Minor transposition above, augmented and
diminished chords affect the 5th note of the Source Pattern.
When playing
a C major
chord.
When playing
an F major
chord.
When playing
a C major
chord.
When playing
an F major
chord.
44 PSR-S975/S775 Reference Manual
2
Styles
When NTR is set to GUITAR
HARMONIC MINOR When the played chord changes from a major to a minor chord, this table
lowers the third and sixth intervals in the scale by a semitone. When the
chord changes from a minor to a major chord, the minor third and flatted
sixth intervals are raised by a semitone. Other notes are not changed. Use
this for chord channels of Sections which respond only to major/minor
chords, such as Intros and Endings.
HARMONIC MINOR
5th
In addition to the Harmonic Minor transposition above, augmented and
diminished chords affect the 5th note of the Source pattern.
NATURAL MINOR When the played chord changes from a major to a minor chord, this table
lowers the third, sixth and seventh intervals in the scale by a semitone.
When the chord changes from a minor to a major chord, the minor third,
flatted sixth and flatted seventh intervals are raised by a semitone. Other
notes are not changed. Use this for chord channels of Sections which
respond only to major/minor chords such as in Intros and Endings.
NATURAL MINOR
5th
In addition to the Natural Minor transposition above, augmented and dimin-
ished chords affect the 5th note of the Source pattern.
DORIAN When the played chord changes from a major to a minor chord, this table
lowers the third and seventh intervals in the scale by a semitone. When the
chord changes from a minor to a major chord, the minor third and flatted
seventh intervals are raised by a semitone. Other notes are not changed. Use
this for chord channels of Sections which respond only to major/minor
chords such as in Intros and Endings.
DORIAN 5th In addition to the Dorian transposition above, augmented and diminished
chords affect the 5th note of the Source pattern.
ALL-PURPOSE This table covers both stroke- and arpeggio-played sounds.
STROKE Suitable for strumming sounds of the guitar. Some notes may sound as if
they are muted—this is the normal condition when chords are played on
guitar by strumming.
ARPEGGIO Suitable for arpeggio-played sound of the guitar, resulting in beautiful four-
note arpeggio sounds.
PSR-S975/S775 Reference Manual 45
2
Styles
3 HIGH KEY / NOTE LIMIT
The settings here adjust the Octave of the notes converted from the original ones through NTT and NTR.
4 RTR (Retrigger Rule)
These settings determine whether notes stop sounding or not and how they change pitch in response to
chord changes.
[4 ]/
[5 ]
HIGH KEY This sets the highest key (upper octave limit) of the note transposition for
the chord root change. Any notes calculated to be higher than the highest
key are transposed down to the next lowest octave. This setting is avail-
able only when the NTR parameter (page 43) is set to “Root Trans.
[6 ] NOTE LIMIT
LOW
These set the note range (highest and lowest notes) for Voices recorded to
the Style channels. By judicious setting of this range, you can ensure that
the Voices sound as realistic as possible—in other words, that no notes
outside the natural range are sounded (e.g., high bass sounds or low pic-
colo sounds).
[7 ] NOTE LIMIT
HIGH
STOP The notes stop sounding.
PITCH SHIFT The pitch of the note will bend without a new attack to match the type of the
new chord.
PITCH SHIFT TO
ROOT
The pitch of the note will bend without a new attack to match the root of the
new chord. However, the octave of the new note remains the same.
RETRIGGER The note is retriggered with a new attack at a new pitch corresponding to the
next chord.
RETRIGGER TO
ROOT
The note is retriggered with a new attack at the root note of the next chord.
However, the octave of the new note remains the same.
Example—When the highest key is F.
Root changes
Notes played
Example—When the lowest note is C3 and the highest is D4.
Root changes
Notes played
High Limit
Low Limit
46 PSR-S975/S775 Reference Manual
2
Styles
Editing the Rhythm Part of a Style (Drum Setup)
The Drum Setup function allows you to edit the rhythm part of the current Style, such as changing the drum
instruments and make various settings. The procedure below applies to step 5 in the Basic Procedure on
page 31.
1 From the BASIC page, while holding down the [F] (REC CHANNEL) button, press the
[1 ] or [2 ] button to select the desired channel to be edited.
NOTE If the different drum sounds are assigned to each section of the selected channel, the sounds are set to that of the current section in order to use the Drum
Setup function.
2 Press the [G] (DRUM SETUP) button to call up the DRUM SETUP window.
3 If necessary, press the STYLE CONTROL [START/STOP] button to start playback of
the rhythm part.
The sounds played back are indicated on the display keyboard, letting you to check the note to edit.
4 Use the [1 ]/[2 ] (NOTE) buttons to select the note to edit.
NOTE You can also select the note by pressing the note on the keyboard.
5 Select the desired instrument to be used.
5-1 Use the [3 ]/[4 ] (INSTRUMENT) buttons to call up the window to select the instru-
ment.
5-2 Use the [2 ]–[7 ] buttons to select the Kit, Category and instrument in order.
5-3 Press the [EXIT] button to close the window.
45 67
2
1
1
5-2
PSR-S975/S775 Reference Manual 47
2
Styles
6 If necessary, set the volume level, pan or pitch by using the [5 ]–[7 ] buttons.
7 If necessary, make more detailed settings.
7-1 Press the [8 ] (DETAIL) button to call up the detailed settings window.
7-2 Use the [3 ]–[5 ] buttons to select the parameter, then use the [6 ]/ [7 ] but-
tons to set the value.
The parameters with “*” in the list below indicates that the settings here affect the settings in step 6.
Pitch Coarse* For coarse tuning of the pitch in semitone increments.
Pitch Fine* For fine tuning of the pitch in cent increments.
NOTE In musical terms a “cent” is 1/100th of a semitone. (100 cents equal one semitone.)
Level* For adjusting the volume level.
Alternate Group Determines the Alternate Group. Any instruments in the same group number can-
not sound at the same time. Playing any instrument within a numbered group will
immediately stop the sound of any other instrument in the same group of the same
number. If this is set to 0, the instruments in the group can sound at the same time.
Pan* Determines the stereo position.
Reverb Send For adjusting the reverb depth.
Chorus Send For adjusting the chorus depth
Variation Send For adjusting the variation effect (DSP1) depth.
When the “Connection” parameter is set to “Insertion” on the Mixing Console dis-
play and this rhythm channel is selected as the assign part, this parameter affects as
below.
When Variation Send is set to 0: No effects are applied to the instrument (Inser-
tion Off).
When Variation Send is set to 1–127: Effects are applied to the instrument
(Insertion On).
Key Assign Determines the Key Assign mode. This parameter is effective only when the kit’s
XG parameter “SAME NOTE NUMBER KEY ON ASSIGN” (see the Data List
on the website) is set to “INST.
Single: Each successive playing of the same sound results in the previous being
cut off or muted.
Multi: Each sound continues to its full decay, even when played successively
multiple times.
Rcv Note Off Determines whether note-off messages are received or not.
Rcv Note On Determines whether note-on messages are received or not.
Filter Cutoff Determines the cutoff frequency or effective frequency range of the filter. Higher
values result in a brighter sound.
7-2
48 PSR-S975/S775 Reference Manual
2
Styles
7-3 Press the [EXIT] button to close the window.
8 Press the [EXIT] button to return to close the DRUM SETUP window.
NOTICE
The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation
(step 7 on page 31).
Filter Resonance Determines the emphasis given to the cutoff frequency (resonance), set in Filter
Cutoff above. Higher values result in a more pronounced effect.
EG Attack Determines how quickly the sound reaches its maximum level after the key is
played. The higher the value, the quicker the attack.
EG Decay 1 Determines how quickly the sound reaches its sustain level (a slightly lower level
than maximum). The higher the value, the quicker the decay.
EG Decay 2 Determines how quickly the sound decays to silence after the key is released. The
higher the value, the quicker the decay.
3
3
PSR-S975/S775 Reference Manual 49
Songs
Songs
Contents
Editing Music Notation (Score) Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Editing Lyrics/Text Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Using the Auto Accompaniment Features with Song Playback. . . . . . . . . . . . . . . . . . . . . . . . . 53
Song Playback Related Parameters (Guide Function, Channel settings, Repeat settings) . . . 54
• Keyboard and Vocal Practice Using the Guide Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
• Playing Backing Parts with the Performance Assistant Technology . . . . . . . . . . . . . . . . . . . . . . . 57
Creating/Editing Songs (Song Creator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
• Recording Melodies (Step Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
• Recording Chords (Step Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
• Selecting the Setup Data to be Recorded to the Top Position of the Song . . . . . . . . . . . . . . . . . 65
• Re-recording a Specific Section—Punch In/Out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
• Editing Channel Events of Existing Song Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
• Editing Chord Events, Notes, System Exclusive Events and Lyrics . . . . . . . . . . . . . . . . . . . . . . . 72
To view the music notation of the selected Song, press the [SCORE] button. You can change the Score
display as desired to suit your personal preferences. The settings here are maintained even when the power is
turned off.
NOTE You can save the settings here as a part of a Song by accessing [FUNCTION] TAB [F] MENU 2 [B] SONG CREATOR TAB [E][F] SETUP. See
page 65.
NOTE Depending on the particular commercially available Song, Score display may not be possible.
NOTE The score of an audio file cannot be shown because the score is created based only on MIDI events.
Editing Music Notation (Score) Settings
50 PSR-S975/S775 Reference Manual
3
Songs
Pressing the [8 ] (SET UP) button calls up the detailed setting display. You can set the
view type by using the [1 ]–[6 ] buttons, then press the [8 ] (OK) button.
[1 ] LEFT ON/
OFF
Enables/disables display of the left-hand notation. Depending on other settings,
this parameter may be unavailable and may appear grayed out. If this is the case,
go to the detailed setting display (see below) and set the LEFT CH parameter to
any channel except “AUTO.” Or, go to the display [FUNCTION] TAB [E]
MENU 1 [H] SONG SETTING TAB [E] GUIDE/CHANNEL and set the
TRACK 2 parameter to any channel except “OFF” (page 54). RIGHT (next param-
eter) and LEFT cannot be turned off at the same time.
[2 ] RIGHT ON/
OFF
Enables/disables display of the right-hand notation. RIGHT and LEFT (above)
cannot be turned off at the same time.
[3 ] CHORD ON/
OFF
Enables/disables display of the chords. If the selected Song does not contain chord
data, chords are not displayed.
[4 ] LYRICS ON/
OFF
Enables/disables display of the lyrics. If the selected Song does not contain lyric
data, lyrics are not displayed. When the Song contains Pedal events, pressing these
buttons can display the Pedal events, instead of displaying Lyrics.
[5 ]NOTE ON/
OFF
Enables/disables display of the note name (pitch). The note name is indicated at the
left of the note. When the space between the notes is too small, the indication may
be moved to the top left of the note. When the Song contains Fingering events,
pressing these buttons can display the fingering, instead of displaying note names.
[6 ] COLOR ON/
OFF
When this is set to ON, the notes in the display appear in color (C: red, D: yellow,
E: green, F: orange, G: blue, A: purple, and B: gray).
[7 ] SIZE Determines the display zoom level of the notation.
[8 ] SET UP Calls up the detailed setting display. See below.
[1 ] LEFT CH Determines which MIDI channel in the Song data is used for the left-hand/right-
hand part. This setting returns to AUTO when a different Song is selected.
AUTO: The MIDI channels in the Song data for the right- and left-hand parts are
assigned automatically—setting the parts to the same channel as the channel
which is specified in the [FUNCTION] TAB [ E] MENU 1 [H] SONG
SETTING TAB [E] GUIDE/CHANNEL (page 54).
1–16: Assigns the specified MIDI channel (1–16) to each of the left- and right-
hand parts.
OFF (Available setting only for LEFT CH): Assigns no channel to the left-
hand part. This disables display of the left-hand key range.
[2 ]RIGHT CH
PSR-S975/S775 Reference Manual 51
3
Songs
[3 ]/
[4 ]
KEY
SIGNATURE
This lets you enter key signature changes in the middle of a Song, at the stopped
position. This menu is useful when the selected Song contains no key signature set-
tings for displaying notation.
[5 ] QUANTIZE This gives you control over the note resolution in the notation, letting you shift or
correct the timing of all displayed notes so that they line up to a particular note
value. Make sure to select the smallest note value used in the Song.
[6 ] NOTE NAME Selects the type of the note name indicated at the left of the note in the notation
from among the following three types. The settings here are available when the
NOTE ON/OFF parameter above is set to ON.
A, B, C: Note names are indicated as letters (C, D, E, F, G, A, B).
Fixed DO: Note names are indicated in solfeggio, with the note of C fixed to DO.
The notes “C, D, E, F, G, A, B” are always indicated as “Do, Re, Mi, Fa, So, La,
Ti” when the language is set to English. Note that the note name indication dif-
fers depending on the current language (page 55).
Movable DO: Note names are indicated in solfeggio according to the key of the
current Song. When a Song in the key of D Major is selected, for example, the
notes “D, E, F#, G, A, B, C#” are indicated as “Do, Re, Mi, Fa, Sol, La, Ti”
when the language is set to English. Note that the note name indication differs
depending on the current language (page 55).
52 PSR-S975/S775 Reference Manual
3
Songs
To view the lyrics of the selected Song or the text, press the [LYRICS/TEXT] button. You can change the
Lyrics/Text display settings, such as background color, as desired.
NOTE When the lyrics are garbled or unreadable, you may need to change the Lyrics Language setting from the [FUNCTION] TAB [E] MENU 1 [H] SONG
SETTING TAB [F] OTHERS (page 55).
NOTE When you create a text file on a computer, make sure to enter line breaks manually. This is necessary because the auto line breaks cannot be entered on this
instrument. If a sentence extends beyond the display and cannot be shown properly, revise the text data by manually entering appropriate line breaks.
Editing Lyrics/Text Display Settings
[1 ] TEXT/LYRICS Switches the screen between the Lyrics display (lyrics data in the Song is
shown) and the Text display (a text file selected via the [5 ]/[6 ] but-
tons).
[2 ]CLEAR
(only when a text
file is selected)
Clears the text from the display. This operation does not delete the text file
itself, but results in no text file being selected. If you want to restore the text
indication, select the text file again via the [5 ]/[6 ] buttons.
[3 ]/
[4 ]
FIXED-16–28,
PROPORTIONAL
-
16–28
(only when a text
file is selected)
Determines the text type (fixed or proportional) and font size. Fixed is suitable
for displaying lyrics with chord names, since the positions of chord names are
“fixed” to the corresponding lyrics. Proportional is suitable for displaying lyrics
without chord names or explanatory notes. The numbers 16–28 indicate font
sizes.
[5 ]/
[6 ]
TEXT FILES Calls up the text File Selection display. After selecting, press the [EXIT] button
to return back to the Lyrics/Text display.
[7 ]/
[8 ]
BACKGROUND Allows changing of the background picture of the Lyrics/Text display. After
making the setting, press the [EXIT] button to return back to the Lyrics/Text
display.
NOTE When the background picture is specified in the Song data, the BACKGROUND setting cannot be changed.
NOTE For information on available image files, refer to the MAIN PICTURE parameter on page 132.
Press [1 ]
buttons
Lyrics display
The lyrics in the Song data are shown.
Text display
The texts created on a computer are shown.
Press the [5 ]/[6 ] button
to actually call up desired text file.
PSR-S975/S775 Reference Manual 53
3
Songs
When playing back a Song and a Style at the same time, channels 9-16 in the Song data are replaced with
Style channels—allowing you to play the accompaniment parts of the Song yourself. Try playing chords
along with the Song playback as shown in the instructions below.
1 Select a Song.
2 Select a Style.
3 While holding down the SONG [J] (STOP) button, press the [F/ K] (PLAY/PAUSE)
button to enable synchronized start of the Song.
4 Press the STYLE CONTROL [ACMP] button to turn on the auto accompaniment
function, then press the [SYNC START] button to enable synchronized start of the
accompaniment.
5 Press the STYLE CONTROL [START/STOP] button or play chords in the chord section.
The Song and Style starts playing. When you play chords, pressing the [SCORE] button and turning
CHORD on (page 49) allows you to see the chord information.
NOTE When playing back a Song and a Style at the same time, the tempo value set in the Song is automatically used.
NOTE The Style Retrigger function (page 13) cannot be used during Song playback.
When the Song playback is stopped, Style playback is also stopped at the same time.
Using the Auto Accompaniment Features with Song Playback
54 PSR-S975/S775 Reference Manual
3
Songs
The instrument has a variety of Song playback functions—repeat playback, various guide settings, etc.—
which can be accessed in the display below.
Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [H] SONG SETTING TAB[ E][F] GUIDE/CHANNEL or
OTHERS
GUIDE/CHANNEL Page
Song Playback Related Parameters (Guide Function, Channel
settings, Repeat settings)
[A]/[B] GUIDE MODE See page 55.
[I] PHRASE MARK
REPEAT
This parameter is available only when the current Song contains Phrase
Marks, which specify certain locations (of several measures each) in the
Song. When this is set to ON, the section corresponding to the Phrase
Mark (specified via the SONG [G] (REW) and [H] (FF) buttons) is
played back repeatedly. Note that this parameter can be set only when the
Song playback is stopped.
[2 ]/
[3 ]
TRACK 2 These parameters determine which MIDI channel in the Song data is
assigned to the left- or right-hand part of the Guide function and the Song
Score function. In addition, the setting here also determines which chan-
nels are assigned to the [TR1] (TRACK 1) and [TR2] (TRACK 2) buttons.
[4 ]/
[5 ]
TRACK 1
[6 ]/
[7 ]
AUTO CH SET When set to “ON,” this automatically sets the proper MIDI channels for
the Right- and Left hand parts pre-programmed in the commercially avail-
able Song data. Normally, this should be set to “ON.
PSR-S975/S775 Reference Manual 55
3
Songs
OTHERS Page
Keyboard and Vocal Practice Using the Guide Function
With the Guide function, the instrument indicates the timing you need to play notes in the Score display for
ease in learning. This instrument also features convenient vocal practice tools that let you adjust the timing of
Song playback to match your vocal performance.
1 Select the desired Song for practicing the keyboard or singing.
2 Call up the setting display.
[FUNCTION] TA B [ E] MENU 1 [H] SONG SETTING TAB[E ] GUIDE/CHANNEL
[G] REPEAT MODE Determines the method of repeat playback.
OFF: Plays through the selected Song, then stops.
SINGLE: Plays through the selected Song repeatedly.
ALL: Continues playback through all the Songs in the specified folder
repeatedly.
RANDOM: Continues playback at random through all the Songs in the
specified folder repeatedly.
[I] FAST
FORWARD
TYPE
Determines the fast forward type of when pressing [H] (FF) button dur-
ing Song playback.
JUMP: Pressing [H] button once instantly sets the playback position to
the next measure without sounding. Holding [H] button scrolls for-
ward continuously.
SCRUB: Pressing and holding [H] plays and sounds the Song at high
speed.
[2 ]/
[3 ]
LYRICS
LANGUAGE
Determines the language displayed in the Lyrics display.
AUTO: When the language is specified in the Song data, the lyrics are
displayed accordingly. When the language is not specified in the Song
data, the lyrics language is regarded as INTERNATIONAL below.
INTERNATIONAL: Handles the displayed lyrics as a western lan-
guage.
JAPANESE: Handles the displayed lyrics as Japanese.
[4 ]/
[5 ]
QUICK START On some commercially available Song data, certain settings related to the
Song (such as Voice selection, volume, etc.) are recorded to the first mea-
sure, before the actual note data. When Quick Start is set to “ON,” the
instrument reads all initial non-note data of the Song at the highest possi-
ble speed, then automatically slows down to the appropriate tempo at the
first note. This allows you to start playback as quickly as possible, with a
minimum pause for reading of data.
[6 ]/
[7 ]
P.A.T. (Perfor-
mance Assistant
Technology)
See page 57.
56 PSR-S975/S775 Reference Manual
3
Songs
3 Use the [A]/[B] buttons to select the desired Guide mode.
Guide modes for keyboard practice
• Follow Lights
When this is selected, Song playback pauses, waiting for you to play the notes correctly. When you play
the correct notes, Song playback continues. Follow Lights was developed for the Yamaha Clavinova
series. This function is used for practicing purposes, with built-in lamps on the keyboard indicating the
notes to be played. Even though the PSR-S975/S775 does not have these lamps, you can use the same
function by following the indications in the displayed notation with the Song Score function.
• Any Key
With this function, you can play the melody of a Song just by pressing a single key (any key is OK) in time
with the rhythm. Song playback pauses and waits for you to play any key. Simply play a key on the
keyboard in time with the music and Song playback continues.
• Your Tempo
The same as Follow Lights, except that Song playback matches the speed at which you play.
Guide mode for singing
• Karao-Key
This function lets you control the Song playback timing with just one finger, while you sing along. This is
useful for singing to your own performance. Song playback pauses, waiting for you to sing. Simply play
any key on the keyboard (playing the keyboard produces no sound) and Song playback continues.
4 Turn the [GUIDE] button on.
5 Call up the Score display by pressing the [SCORE] button.
6 Press the SONG [F/ K] (PLAY/PAUSE) button to start playback.
Practice playing the keyboard or singing, along with the Guide mode selected in step 3.
7 Press the [J] (STOP) button to stop playback.
NOTE You can save the Guide settings as a part of the Song data (page 65). For Songs to which the Guide settings have been saved, the Guide function will be
automatically turned on and the related settings will be recalled when the Song is selected.
PSR-S975/S775 Reference Manual 57
3
Songs
Playing Backing Parts with the Performance Assistant Technology
This feature lets you play your own backing parts on the keyboard along with Song playback, and have them
sound perfectly appropriate (even though you might be playing wrong notes).
1 Select a Song containing chord data.
The Performance assistant technology is applied only to a Song containing chord data. To confirm whether
the selected Song contains chord data or not, return to the Main display then start playback. If the current
Song contains chord data, the Main display shows the current chord type. After stopping playback, go to
the next step.
2 Call up the operation display.
[FUNCTION] TA B [ E] MENU 1 [H] SONG SETTING TAB[F ] OTHERS
3 Use the [6 ]/[7 ] buttons to turn “P.A.T.” (performance assistant technology) on.
4 Press the SONG [F/ K] (PLAY/PAUSE) button to start playback.
5 Play the keyboard.
Along with Song playback, try playing the bass line with the left hand area while playing various phrases
or chords with the right hand area. Even if you do not know what notes should be played, don’t worry and
play any keys as desired! Only the harmonically “correct” notes matching the current chord are sounded,
regardless of the notes you actually play.
6 Press the [J] (STOP) button to stop playback.
After you finish playing, make sure to turn P.A.T. off.
NOTE Selecting another Song resets P.A.T. to OFF.
Current chord
58 PSR-S975/S775 Reference Manual
3
Songs
The Owner’s Manual covers how to create an original Song by recording your keyboard performance (called
“Realtime Recording”). This Reference Manual shows how to create an original Song by entering notes one
by one (called “Step Recording”) and how to improve an already created Song by editing the detailed
parameters.
Realtime Recording and Step Recording
When creating a Song, these two Recording methods are available. With Realtime Recording, this instrument
records the performance data as it is played. With Step Recording, you can compose your performance by
“writing” it down one event at a time.
This chapter primarily covers the instructions for Step Recording.
Song Data Structure
A Song consists of 16 MIDI channels. You can create data of a Song by recording your performance to a
specific channel or channels in realtime, or by executing the Step Recording.
Song Creator Display Structure
The Song Creator display can be called up via [FUNCTION] TAB [F] MENU 2 [B] SONG
CREATOR
There are seven pages (tabs) in the Song Creator display.
• REC MODE..... For re-recording a Song. See page 66.
• SETUP............. For selecting the panel setups to be recorded to the top position of the Song. See page 65.
• CHANNEL....... For editing Channel events. See page 69.
Creating/Editing Songs (Song Creator)
Channel 1
Song
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 16
System Exclusive
Lyrics
Right 1
Left
Right 2
-
Multi Pad 1
Multi Pad 2
Multi Pad 3
Multi Pad 4
Rhythm 1
Rhythm 2
Bass
Chord 1
Chord 2
Pad
Phrase 1
Phrase 2
Keyboard Performance
Realtime Recording:
By default, your keyboard performance will be recorded to MIDI channels 1–3.
Step Recording:
Without specifying the keyboard part, you can input the melodies or notes on the
music notation sheet one by one to the desired channel.
Recording Part
(Default settings)
Style playback
Realtime Recording:
By default, Style playback will be recorded to MIDI channels 9–16.
Step Recording:
After inputting the Chord change/Section change events, press the [F] (EXPAND)
button to actually record the note data to MIDI channels 9–16.
Multi Pad playback
Realtime Recording:
By default, Multi Pad playback will be recorded to MIDI channels 5–8.
Step Recording:
Multi Pad playback events cannot be input via Step Recording.
PSR-S975/S775 Reference Manual 59
3
Songs
• CHORD ............For recording chords and Sections with precise timing (page 62) or editing them (page 72).
• 1-16 ...................For recording melodies (Step Recording; see below) or editing the recorded melodies
(page 72).
SYS/EX. ............For editing System Exclusive events (tempo, time signature, etc.). See page 72.
• LYRICS.............For inputting/editing a Song name and lyrics. See page 72.
Recording Melodies (Step Recording)
1 Press the SONG [REC] and SONG [J] (STOP) buttons simultaneously.
A blank Song (“New Song”) is called up for recording.
2 Call up the operation display.
[FUNCTION] TA B [ F] MENU 2 [B] SONG CREATOR TA B [ E][F] 1-16
3 Press the [F] button to select the channel for recording.
4 Press the [G] (STEP REC) button to call up the STEP RECORD display.
5 Start Step Recording by using the [A]–[J] buttons and [1 ]–[8 ] buttons, as
well as the keyboard.
Refer to the example on page 61 for specific instructions.
3
4
When a note is input, the
location (bar: beat: clock),
note name, velocity and
length listed in succes-
sion.
60 PSR-S975/S775 Reference Manual
3
Songs
6 Press the SONG [J] (STOP) button (or press the [C] button) to return to the top of the
Song, then hear the newly entered Song by pressing the [F/ K] (PLAY/PAUSE) button.
7 Press the [EXIT] button to exit from the Step Recording display.
8 Press the [I] (SAVE) button to carry out the Save operation.
For details, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The recorded Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save oper-
ation.
[A]/[B]/
[C]
Moves the cursor in the list.
[G] Determines the velocity (loudness) of the note to be entered. The velocity
value can be specified within a range from 1 to 127. The higher the velocity
value, the louder the actual sound.
KBD.VEL: Actual resulting velocity
fff: 127
ff: 111
f: 95
mf: 79
mp: 63
p: 47
pp: 31
ppp: 15
[H] Determines the gate time (actual length) of the note to be entered.
Normal: 80%
Tenuto: 99%
Staccato: 40%
Staccatissimo: 20%
Manual: The gate time can be set to any desired percentage by using the
Data dial.
[I] Determines the note type to be entered: normal, dotted or triplet.
[J] DELETE Deletes the data of the current line.
[1 ] BAR Sets the position of the note to be entered. Note that a quarter note has a reso-
lution of 1,920 clocks.
[2 ]BEAT
[3 ]CLOCK
[4 ]–
[8 ]
Determines the note length to be entered: whole-note, half-note, quarter-note,
eighth-note or sixteenth-note.
PSR-S975/S775 Reference Manual 61
3
Songs
Example of Step Recording—Melodies (detailed instructions of step 5 on
page 59)
In this example, keep in mind that one of the steps involves holding down a key on the keyboard while
carrying out the operation.
Before carrying out the instructions below, select the desired Voice on the STEP RECORD display. Note
that only the Voice selection and Note input operations are possible during Step Recording.
NOTE Since the actual note length (determined via the Gate Time) may differ from the note length on the notation, the Score of the Song recorded here may be
different from the notation above.
1 Enter the first and second notes with a slur.
1-1 Press the [G] button to select “f.
1-2 Press the [H] button to select “Tenuto.
1-3 Press the [I] button to select the “dotted” note type.
1-4 Select the dotted quarter-note length by using the [6 ] buttons.
1-5 Play the C3 key.
This enters the first note.
1-6 Press the [I] button to select the “normal” note type.
1-7 Press the [7 ] button to select the eight-note length.
1-8 Play the D3 key.
This enters the second note.
2 Enter the next notes and apply staccato.
2-1 Press the [H] button to select “Staccato.
2-2 Press the [6 ] button to select the quarter-note length.
2-3 Play the keys E3 and F3 in order.
This completes the first measure.
3 To enter a quarter-note rest, press the [6 ] button again.
To enter the rest, use the [4 ]–[8 ] buttons. (Press the button once to select the rest value, and
once again to actually enter it.) The BAR:BEAT:CLOCK indication lets you confirm that a rest having
the specified note length has been entered.
1234
* The numbers shown in the illustration correspond to
the following operation step numbers.
62 PSR-S975/S775 Reference Manual
3
Songs
4 Enter the next notes and apply a tie.
4-1 Press the [G] button to select “mp.
4-2 Press the [H] button to select “Normal.
4-3 While holding G3 key on the keyboard, press the [6 ] button.
This operation advances the input position from the current 2nd beat to the next 3rd beat. Do not
release the G3 key yet. Keep holding it while executing the following steps.
4-4 While holding the G3 key, press the C4 key.
Do not release the G3 and C4 keys yet. Keep holding the notes while carrying out the following
step.
4-5 While holding the keys G3 and C4, press the [5 ] button.
After pressing the button, release the keys.
This enters the notes G3 and C4 notes have been entered as shown in the notation on the previous
page.
Recording Chords (Step Recording)
In Step Recording, you can record the precise change timing of chords and Sections (such as Intro, Main and
Ending) of the current Style on the single display. After the operations are finished, the recorded information
or events will be converted to the actual MIDI notes or Song data.
1 Press the SONG [REC] and SONG [J] (STOP) buttons simultaneously.
A blank Song (“New Song”) is called up for recording.
NOTE Selecting a blank Song initializes the panel settings.
2 Select the Style you want to use in the Song.
3 Call up the operation display.
[FUNCTION] TAB [F] MENU 2 [B] SONG CREATOR TAB [E][F] CHORD
4 Press the [G] (STEP REC) button to call up the STEP RECORD display.
PSR-S975/S775 Reference Manual 63
3
Songs
5 Start Step Recording by using the [A]–[J] buttons and [1 ]–[8 ] buttons, as
well as the keyboard.
Refer to the example below for specific instructions.
6 Press the SONG [J] (STOP) button (or press the [C] button) to return to the top of the
Song, then hear the newly entered Song by pressing the [F/ K] (PLAY/PAUSE) button.
7 Press the [EXIT] button to exit from the Step Recording display.
8 Press the [F] (EXPAND) button to convert the recorded data to the actual MIDI notes
(Song data).
9 Press the [I] (SAVE) button to carry out the Save operation.
For details, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The recorded Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save oper-
ation.
Example of Step Recording—Chord (detailed instructions of step 5 above)
NOTE This example uses a Style in 4/4 time.
Before executing the instructions below, make sure that [AUTO FILL IN] button is turned off since no Fill
in is included in the notation example above.
For details on these
buttons, refer to
page 60.
C F G F G7 C
1 2 3
* The numbers shown in the illustration correspond to
the following operation step numbers.
MAIN A BREAK MAIN B
64 PSR-S975/S775 Reference Manual
3
Songs
1 Enter the chords for the Main A section.
1-1 Press the STYLE CONTROL MAIN VARIATION [A] button.
1-2 Press the [5 ] button to select the half-note length.
1-3 Play the chords C, F and G in the chord section of the keyboard.
2 Enter the chords for the Break section.
2-1 Press the STYLE CONTROL [BREAK] button.
2-2 Press the [6 ] button to select the quarter-note length.
2-3 Play the chords F and G7 in the chord section of the keyboard.
NOTE If you want to record the Fill In Section, turn on the [AUTO FILL IN] button, then press one of the MAIN VARIATION [A]–[D] buttons.
3 Enter the chords for the Main B section.
3-1 Press the STYLE CONTROL MAIN VARIATION [B] button.
3-2 Press the [4 ] button to select the whole-note length.
3-3 Play the chord C in the chord section of the keyboard.
1-2
1-1
1-3
C
F
G
2-2
2-3
2-1
F
G7
3-2
3-3
C
3-1
PSR-S975/S775 Reference Manual 65
3
Songs
Selecting the Setup Data to be Recorded to the Top Position of the
Song
The current settings of the Mixing Console display and other panel settings you made can be recorded to the
top position of the Song as Setup data. The panel settings recorded here are automatically recalled when the
Song starts.
1 Select the Song to which you want to record the Setup data.
2 Call up the operation display.
[FUNCTION] TA B [ F] MENU 2 [B] SONG CREATOR TA B[ E][F] SETUP
3 Press the SONG [J] (STOP) button to move the Song position to the top of the Song.
4 Determine the Setup data to be recorded.
[1 ]–
[3 ]
SELECT Determines which playback features and functions will be automatically
called up along with the selected Song. The items selected here can be
recorded only to the top position of the Song, except for the KEYBOARD
VOICE.
VOICE, VOLUME, PAN, FILTER, EFFECT, TEMPO, EQ:
Records the tempo setting and all settings made from the Mixing Con-
sole.
KEYBOARD VOICE: Records the panel settings, including the Voice
selection of the keyboard parts (RIGHT 1, 2, and LEFT) and their on/
off status. Panel settings recorded here are same as the ones memo-
rized to the One Touch Setting. This can be recorded at any point in a
Song, letting you change Voices in the middle of a Song.
LYRICS SETTING: Records the settings in the Lyrics display.
SCORE SETTING: Records the settings in the Score display.
MIC/VOCAL HARMONY (PSR-S975), MIC SETTING (PSR-
S775):
Records the microphone/guitar settings. For details about the
parameters, refer to the “Parameter Chart” in the Data List on the web-
site.
GUIDE SETTING: Records the settings of the Guide functions includ-
ing the Guide ON/OFF setting.
4 5
66 PSR-S975/S775 Reference Manual
3
Songs
5 Press the [8 ] (APPLY) button to record the data.
6 Press the [I] (SAVE) button to carry out the Save operation.
For details, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The edited Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save opera-
tion.
Re-recording a Specific Section—Punch In/Out
When re-recording a specific section of an already-recorded Song, use the Punch IN/OUT function. In this
method, only the data between the Punch In point and the Punch Out point is overwritten with the newly
recorded data. Keep in mind that the notes before and after the Punch In/Out points are not recorded over,
although you will hear them play back normally to guide you in the Punch In/Out timing.
NOTE The Style Retrigger function (page 13) cannot be used when recording over existing data (overdubbing).
1 Select the desired Song for re-recording.
2 Call up the operation display.
[FUNCTION] TAB [F] MENU 2 [B] SONG CREATOR TAB [E] REC MODE
3 Determine the settings for recording.
[4 ]/
[5 ]
MARK ON Add or remove a checkmark to the selected item. Checked items are
recorded to the Song.
[4 ]/
[5 ]
MARK OFF
[1 ]–
[3 ]
REC START
(Punch In)
Determines the Punch In timing.
NORMAL: Overwrite recording starts when the Song playback is started
via the SONG [F/
K] (PLAY/PAUSE) button or when you play the
keyboard in the Synchro Standby mode.
FIRST KEY ON: The Song plays back normally, then starts overwrite
recording as soon as you play the keyboard.
PUNCH IN AT: The Song plays back normally up to the beginning of
the indicated Punch In measure, then starts overwrite recording at that
point. You can set the Punch In measure by pressing the [3 ] but-
ton.
PSR-S975/S775 Reference Manual 67
3
Songs
4 While holding the SONG [REC] button, press the desired track button.
5 Press the SONG [F/ K] (PLAY/PAUSE) button to start Punch In/Out recording.
According to the settings in step 3, play the keyboard between the Punch In and Punch Out points. Refer to
the examples of various settings illustrated below.
6 Press the [I] (SAVE) button to carry out the Save operation.
For details, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The recorded Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save oper-
ation.
[4 ]–
[6 ]
REC END
(Punch Out)
Determines the Punch Out timing.
REPLACE ALL: This deletes all data after the point at which recording
is stopped.
PUNCH OUT: The Song position at which recording is stopped is
regarded as the Punch Out point. This setting maintains all data after
the point at which recording is stopped.
PUNCH OUT AT: Actual overwrite recording continues until the begin-
ning of the specified Punch Out measure (set with the corresponding
display button), at which point recording stops and normal playback
continues. This setting maintains all data after the point at which
recording is stopped. You can set the Punch Out measure by pressing
the [6 ] buttons.
[7 ]/
[8 ]
PEDAL PUNCH
IN/OUT
When this is set to ON, you can use Foot Pedal 2 to control the Punch In
and Punch Out points. While a Song is playing back, pressing (and hold-
ing) Foot Pedal 2 instantly enables Punch In recording, while releasing the
pedal stops recording (Punch Out). You can press and release Foot Pedal 2
as often as you want during playback to punch in/out of overwrite record-
ing. Note that the current function assignment of the Foot Pedal 2 is can-
celled when the Pedal Punch In/Out function is set to ON.
NOTE Pedal Punch In/Out operation may be reversed depending on the particular pedal you’ve connected
to the instrument. If necessary, change the pedal polarity to reverse the control (page 117).
68 PSR-S975/S775 Reference Manual
3
Songs
Examples of re-recording with various Punch In/Out settings
This instrument features several different ways you use the Punch In/Out function. The illustrations below
indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded.
12345678
12345
12345678
12345678
12345
12345678
12345678
12345
12345678
68
12345 7
REC START setting
REC END setting
NORMAL
REPLACE ALL
NORMAL
PUNCH OUT
NORMAL
PUNCH OUT AT=006
FIRST KEY ON
REPLACE ALL
FIRST KEY ON
PUNCH OUT
FIRST KEY ON
PUNCH OUT AT=006
PUNCH IN AT=003
REPLACE ALL
PUNCH IN AT=003
PUNCH OUT
PUNCH IN AT=003
PUNCH OUT AT=006
Original data
Start overwrite recording *1
Start overwrite recording *1
Start overwrite recording *1
Play back
original data
Play back
original data
Play back
original data
Play back
original data
Play back
original data
Play back
original data
Play the keyboard to start
overwrite recording
Play the keyboard to start
overwrite recording
Play the keyboard to start
overwrite recording
Start overwrite recording
Start overwrite recording
Start overwrite recording
Stop recording *2
Stop recording *2
Stop overwrite recording/play original data
Stop recording *2
Stop recording *2
Stop overwrite recording/play original data
Stop recording *2
Stop recording *2
Stop overwrite recording/play original data
Deleted
Deleted
*1 If you want to re-record from the 3rd
measure in this setting, move the
Song position to the 3rd measure
then start recording to avoid over-
writing measures 1–2.
*2 To stop recording, press the [REC]
button at the end of measure 5.
Previously recorded data
Newly recorded data
Deleted data
Deleted
PSR-S975/S775 Reference Manual 69
3
Songs
Editing Channel Events of Existing Song Data
You can apply various useful functions to already recorded data, such as Quantize and Transpose, on the
CHANNEL page.
1 Select a Song to be edited.
2 Call up the operation display.
[FUNCTION] TA B [ F] MENU 2 [B] SONG CREATOR TA B [ E][F] CHANNEL
3 Use the [A]/[B] buttons to select the edit menu, then edit the data by using the
[1 ]–[8 ] buttons.
For details of the edit menu and available settings, see pages 70–71.
4 Press the [D] (EXECUTE) button to carry out the operation for the current display.
After the operation is completed, this button changes to “UNDO,” letting you restore the original data if
you are not satisfied with the operation results. The Undo function only has one level; only the previous
operation can be undone.
5 Press the [I] (SAVE) button to carry out the Save operation.
For details, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The edited Song data will be lost if you select another Song or turn off the power to the instrument without carrying out the Save opera-
tion.
5
3
3
4
70 PSR-S975/S775 Reference Manual
3
Songs
1 QUANTIZE
The Quantize function allows you to align the timing of all the notes in a channel. For example, if you
record the musical phrase shown below, you may not play it with absolute precision, and your
performance may have been slightly ahead of or behind the precise timing. Quantize is a convenient way
of correcting for this.
[2 ]/
[3 ]
CHANNEL Determines which MIDI channel in the Song data is to be quantized.
[4 ]–
[6 ]
SIZE Selects the quantize size (resolution). For optimum results, you should set
the Quantize size to the shortest note value in the channel. For example, if
eighth notes are the shortest in the channel, you should use eighth note as
the Quantize size.
The three Quantize settings marked with asterisks (*) are exceptionally
convenient, since they allow you to quantize two different note values at
the same time. For example, when the straight eighth notes and eighth-
note triplets are contained in the same channel, if you quantize by the
straight eighth notes, all notes in the channel are quantized to straight
eighth notes—completely eliminating any triplet feel. However, if you use
the eighth note + eighth note triplet setting, both the straight and triplet
notes will be quantized correctly.
[7 ]/
[8 ]
STRENGTH Determines how strongly the notes will be quantized. A setting of 100%
produces exact timing. If a value less than 100% is selected, notes will be
moved toward the specified quantization beats according to the specified
percentage. Applying less than 100% quantization lets you preserve some
of the “human” feel in the recording.
After 1/8 note quantization
1/4 note
1/4 note
triplet
1/16 note
1/16 note
triplet
1/32 note
1/8 note+
1/8 note triplet*
1/16 note+
1/8 note triplet*
1/16 note+
1/16 note triplet*
1/8 note
1/8 note
triplet
Settings:
Quarter-note length
Original data
(assuming 4/4 meter)
Quantizing
strength =100
Quantizing
strength =50
Quarter-note length
PSR-S975/S775 Reference Manual 71
3
Songs
2 DELETE
You can delete the data of the specified channel in the Song. Select the channel whose data to be deleted
by using the [1 ]–[8 ] buttons, then press the [D] (EXECUTE) button to carry out the operation.
3 MIX
This function lets you mix the data of two channels and place the results in a different channel. It also lets
you copy the data from one channel to another.
4 CHANNEL TRANSPOSE
This allows you to transpose the recorded data of individual channels up or down by a maximum of two
octaves in semitone increments.
NOTE Make sure not to transpose channels 9 and 10. In general, Drum Kits are assigned to these channels. If you transpose the channels of Drum Kits, the
instruments assigned to each key will be changed.
[2 ]/
[3 ]
SOURCE 1 Determines the MIDI channel (1–16) to be mixed. All MIDI events of the
channel specified here are copied to the destination channel.
[4 ]/
[5 ]
SOURCE 2 Determines the MIDI channel (1–16) to be mixed. Only note events of the
channel specified here are copied to the destination channel. Besides the
values 1–16, there is a “COPY” setting that allows you to copy the data
from Source 1 to the destination channel.
[6 ]/
[7 ]
DESTINATION Determines the channel into which the mix or copy results will be placed.
[F] CH 1–8/CH 9–16 Toggles between the two channel displays: Channels 1–8, and Channels
9–16.
[G] ALL CH To simultaneously set all channels to the same value, adjust the Channel
Transpose for one of the channels while holding down this button.
72 PSR-S975/S775 Reference Manual
3
Songs
Editing Chord Events, Notes, System Exclusive Events and Lyrics
You can edit chord events, note events, System Exclusive events and lyrics in the same manner on the
corresponding displays: CHORD, 1-16, SYS/EX and LYRICS. These are called “Event List” displays
because some events are shown in a list view.
NOTE After you edit events in the CHORD display, press the [F] (EXPAND) button to convert the data into Song data.
NOTE Chord section data recorded with Realtime Recording cannot be indicated and edited on this display.
[A]/[B] Moves the cursor up/down and selects the desired event.
[C] Moves the cursor to the top (beginning of the Song).
[D]/[E] Moves the cursor left/right and selects the desired parameter of the high-
lighted event.
[H] FILTER Calls up the Filter display (page 74), letting you select only the events you
wish to be shown in the event list.
[I] SAVE Press to save the edited Song.
[J] MULTI SELECT Holding this button while using the [A]/[B] buttons lets you select multi-
ple events.
[1 ] BAR Determines the position (bar/beat/clock) of the data. One clock is equal to
1/1920th of a quarter note.
[2 ]BEAT
[3 ]CLOCK
[4 ]/
[5 ]
DATA ENTRY Adjusts the event value. For coarse adjustment, use the [4 ] buttons.
For fine adjustment, use the [5 ] buttons or the Data dial.
[6 ] CUT Carries out the cut/copy/delete/paste operation.
[7 ]COPY
[7 ] DELETE
[8 ]PASTE
[6 ] INSERT Adds a new event.
[8 ] CANCEL Cancels editing and restores the original value.
Indicates the
event value.
Indicates the location
(position) of the cor-
responding event.
Indicates the event
type.
See page 73.
Event List display
PSR-S975/S775 Reference Manual 73
3
Songs
Chord Events (CHORD Page)
Note Events (1-16 Page)
System Exclusive Events (SYS/EX. Page)
Lyrics Events (LYRICS Page)
Style Style
Tempo Tempo
Chord Chord root, Chord type, On Bass Chord
Sect Style Section (Intro, Main, Fill In, Break, Ending)
OnOff On/off status for each part (channel) of the Accompaniment Style
CH.Vol Volume for each part (channel) of the Accompaniment Style
S.Vol Overall volume of the Accompaniment Style
Note An individual note within a Song. Includes the note number which corresponds
to the key which was played, plus a velocity value based on how hard the key is
played, and the gate time value (the length of a note).
Ctrl (Control Change) Settings for controlling the Voice, such as volume, pan, filter and effect depth
(edited via the Mixing Console described in chapter 8), etc.
Prog (Program Change) MIDI program change number for selecting a Voice.
P.Bnd (Pitch Bend) Data for changing the pitch of a Voice continuously. This event is generated by
controlling the [PITCH BEND] wheel.
A.T. (Aftertouch) This event is generated when pressure is applied to a key after the note is
played. Note that the keyboard of this instrument does not feature Aftertouch.
ScBar (Score Start Bar) Determines the top measure of a Song.
Tempo Determines the tempo value.
Time (Time signature) Determines the time signature.
Key (Key signature) Determines the key signature, as well as the major/minor setting, for the music
score shown on the display.
XGPrm (XG parame-
ters)
Allows you to make various detailed changes to the XG parameters. For
details, refer to “MIDI Data Format” in the Data List on the website.
SYS/EX. (System
Exclusive)
Displays the System Exclusive data in the Song. Keep in mind that you cannot
create new data or change the contents of the data here; however, you can
delete, cut, copy, and paste the data.
Meta (Meta event) Displays the SMF meta events in the Song. Keep in mind that you cannot cre-
ate new data or change the contents of the data here; however, you can delete,
cut, copy, and paste the data.
Name Allows you to enter the Song name.
Lyrics Allows you to enter lyrics.
Code CR: Enters a line break in the lyrics text.
LF: Clears the currently displayed lyrics and displays the next set of lyrics.
74 PSR-S975/S775 Reference Manual
3
Songs
Displaying Specific Types of Events
In the Event List displays, various types of events are shown. It may sometimes be difficult to pinpoint
the ones you want to edit. This is where the Filter function comes in handy. It lets you determine which
event types will be shown in the Event List displays.
1 Press the [H] (FILTER) button in the CHORD, 1-16, SYS/EX. or LYRICS displays.
2 Checkmark the desired item to be displayed.
3 Press the [EXIT] button to return to the Event List display in which only unfiltered Events are
shown.
[C] MAIN Displays all main types of events.
[D] CC Displays all specific Control Change message events.
[E] STYLE Displays all types of Style playback related events.
[H] ALL ON Checkmarks all event types.
[I] NOTE/ALL
OFF/CHORD
“NOTE” (shown when [C] (MAIN) is on) selects only the
NOTE data. “CHORD” (shown when [E] (STYLE) is on)
selects only the CHORD data. “ALL OFF” (shown when [D]
(CC) is on) removes all checkmarks.
[J] INVERT Reverses the checkmark settings for all boxes. In other words,
this enters checkmarks to all boxes that were previously
unchecked and vice versa.
[2 ]–
[5 ]
Select and event type to be checked or unchecked.
[6 ]/
[7 ]
MARK ON Enters/removes the checkmark for the selected event type. The
checked event types can be shown on the CHORD, 1-16, SYS/
EX. or LYRICS page.
[6 ]/
[7 ]
MARK OFF
4
4
PSR-S975/S775 Reference Manual 75
USB Audio Player/Recorder
USB Audio Player/Recorder
Contents
Displaying Lyrics of an Audio file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Audio files can also show lyrics (just as with MIDI files), if the particular file contains compatible lyrics data.
When the selected audio file (MP3 file) contains lyrics data, you can view it on the instrument's display. Even if
the audio file does not contain lyrics data, you can view the lyrics on the display by loading a text file having the
same name as the audio file.
1 Connect the USB flash drive containing the audio files to the [USB TO DEVICE]
terminal.
2 Press the [USB AUDIO PLAYER] button to call up the USB AUDIO PLAYER display.
3 Select the desired audio file.
3-1 Press the [H] (FILES) button to call up the Audio File Selection display.
3-2 Press one of the [A]–[J] to select the desired file, and then press the [EXIT] button.
3-3 Press the [EXIT] button to return to the USB AUDIO PLAYER display.
Displaying Lyrics of an Audio file
3
4
76 PSR-S975/S775 Reference Manual
4
USB Audio Player/Recorder
4 Press the [F] (LYRICS) button to call up the LYRICS display.
When the audio file contains lyrics data, the lyrics are shown on the LYRICS display.
You can scroll through the entire lyrics by using the TAB [E][F] buttons.
NOTE Lyrics for audio files can only manually be turned to the next or previous page.
NOTE You can conveniently turn to the next/previous text page by assigning the function to the foot pedal: [FUNCTION] TAB [E] MENU 1 [D] CON-
TROLLER TAB [E] FOOT PEDAL
[2 ] STOP Stop playback of the audio file.
[3 ] PLAY/PAUSE Starts or pauses playback at the current position of the audio file.
[7 ]/
[8 ]
BACKGROUND Allows changing of the background picture of the Lyrics display. After
making the setting, press the [EXIT] button to return back to the Lyrics
display.
NOTE This setting is applied also to the LYRICS display of MIDI songs (page 52).
Priority of Lyrics data of an Audio File (MP3 File)
When showing the lyrics data of an audio file (MP3 file), only one type of data (according to the priority
order below) is shown:
1) Lyrics in the MP3 file with the USLT tag.
2) Text file (*.txt) with the same name of the audio file in the same folder.
Indicates the current page
of the lyrics.
5
5
PSR-S975/S775 Reference Manual 77
Multi Pads
Multi Pads
Contents
Creating Multi Pads (Multi Pad Creator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
• Multi Pad—Realtime Recording via MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
• Multi Pad—Step Recording via MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Editing Multi Pads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
This feature lets you create your original Multi Pad phrases, and also allows you to edit existing Multi Pad
phrases to create your own. As with Song Creator, Multi Pad Creator features Realtime Recording and Step
Recording. However, each Multi Pad consists of only one channel and convenient functions such as Punch
In/Out are not available.
Multi Pad—Realtime Recording via MIDI
Before starting operation, note the following points:
Since only the RIGHT 1 part performance will be recorded as Multi Pad phrases, you should select the
desired Voice for the RIGHT 1 part beforehand.
The Super Articulation Voices and the Organ Flutes Voices cannot be used for Multi Pad Recording. If one of
these Voices is set for RIGHT 1 part, it will be replaced with the Grand Piano Voice when recording.
Since recording can be done along with and synchronized to Style playback, you should select the desired
Style beforehand. However, keep in mind that the Style is not recorded.
1 If you want to create a new Multi Pad in the existing Bank, select the desired Multi Pad
Bank via the MULTI PAD CONTROL [SELECT] button.
If you want to create a new Multi Pad in an empty new Bank, this step is unnecessary.
2 Call up the operation display.
[FUNCTION] TA B [ F] MENU 2 [C] MULTI PAD CREATOR TA B [E] RECORD
Creating Multi Pads (Multi Pad Creator)
4
3
12
1110
6
14
78 PSR-S975/S775 Reference Manual
5
Multi Pads
3 If you want to create a new Multi Pad in an empty new Bank, press the [C] (NEW
BANK) button.
4 Select a particular Multi Pad for recording by pressing the corresponding [A], [B], [F]
and [G] button.
5 If necessary, select the desired Voice with the VOICE category selection buttons.
After selecting the Voice, press the [EXIT] button to return to the previous display.
6 Press the [H] (REC) button to enter recording standby status for the Multi Pad selected
in step 4.
7 Play the keyboard to start recording.
To ensure that your recording will be in sync with the tempo, press the [METRONOME] button to turn on
the metronome.
If you want to insert silence before the actual phrase, press the STYLE CONTROL [START/STOP] to
start both the Recording and rhythm playback (of the current Style). Keep in mind that the rhythm part of
the current Style plays back during recording although it is not recorded.
Recommended notes for the Chord Match phrase
If you intend to create a Chord Match phrase, use the notes of C, D, E, G, A and B, or in other words, play
the phrase in the key of C major. This ensures that the phrase will stay harmonically constant and match
whichever chord you play in the left hand section of the keyboard.
8 Stop recording.
Press the [H] (STOP) button or the panel MULTI PAD CONTROL [STOP] button or the STYLE
CONTROL [START/STOP] button to stop recording when you’ve finished playing the phrase.
9 Listen back to your newly recorded phrase, by pressing the appropriate MULTI PAD
button, [1]–[4]. To re-record the phrase, repeat steps 6–8.
10
Turn the Repeat parameter of each pad On or Off by using the [1

]–[4

] buttons.
If the Repeat parameter is on for the selected pad, playback of the corresponding pad will continue until
the MULTI PAD CONTROL [STOP] button is pressed. When you press a Multi Pad for which Repeat is
turned on during Song or Style playback, playback will start and repeat in sync with the beat.
If the Repeat parameter is off for the selected pad, playback will end automatically as soon as the end of
the phrase is reached.
11
Turn Chord Match of each pad On or Off by using the [5 ]–[8 ] buttons.
If the Chord Match parameter is on for the selected pad, the corresponding pad is played back according to
the chord specified in the chord section of the keyboard generated by turning [ACMP] on, or specified in
the LEFT part of the keyboard generated by turning [LEFT] on (when turning the [ACMP] off).
12
Press the [D] (NAME) button, then enter the desired name for each Multi Pad.
13
If you want to record other Multi Pads, repeat steps 4–12.
14
Press the [I] (SAVE) button to save the Multi Pad, then save the Multi Pad data as a
Bank containing a set of four Pads.
NOTICE
The edited Multi Pad data will be lost if you select another Multi Pad Bank or turn off the power to the instrument without carrying out the
Save operation.
CRC CRC
C = Chord note
C, R = Recommended note
PSR-S975/S775 Reference Manual 79
5
Multi Pads
Multi Pad—Step Recording via MIDI
Step Recording can be carried out in the EDIT page. After selecting a Multi Pad in step 4 on page 78, press
the TAB [F] button to select the EDIT page.
The EDIT page indicates the Event list, which lets you record notes with absolutely precise timing. This Step
Recording procedure is essentially the same as that for Song Recording (pages 59–62), with the exception of
the points listed below:
There is no LCD button for selecting channels, since Multi Pads contain data for only a single channel.
In the Multi Pad Creator, only channel events and System Exclusive messages can be entered. Chord and
Lyrics events are not available. You can switch between the two types of Event Lists by pressing the [F] but-
ton.
You can manage (rename, copy, paste and delete) your created Multi Pad Bank and each of the Multi Pads
belonging to the Bank. For instructions on managing the Multi Pad Bank file, refer to “Basic Operations” in
the Owner’s Manual. This section covers how to manage each Multi Pad.
1 Select the Multi Pad Bank containing the Multi Pad to be edited.
Press the MULTI PAD CONTROL [SELECT] button to call up the Multi Pad Bank Selection display, use
the TAB [E][F] buttons to call up “PRESET,” “USER” or “USB” (when USB flash drive is connected),
then use the [A]–[J] buttons to select the desired Multi Pad Bank.
NOTE If you select a Preset Multi Pad Bank then edit the Multi Pads, save your edits to “USER” or “USB” (when USB flash drive is connected) as a User Bank.
2 Press the [7 ] (EDIT) button of MENU 1 to call up the MULTI PAD EDIT display.
3 Select a particular Multi Pad to be edited by pressing any of the [A], [B], [F] and [G]
buttons.
4 Edit the selected Pad.
Editing Multi Pads
[1 ] NAME Changes the name of each Multi Pad.
[3 ] COPY Copies the Multi Pad(s). See below.
[4 ] PASTE Pastes the Multi Pad(s) copied by the [3 ] button.
[5 ] DELETE Deletes the selected Multi Pads.
80 PSR-S975/S775 Reference Manual
5
Multi Pads
5 Save the current Bank containing the edited Multi Pads.
Press the [8 ] button to call up the confirmation window, press the [F] (YES) button to call up the USER
page, then press the [6 ] (SAVE) button to carry out the Save operation. For details, refer to “Basic
Operations” in the Owner’s Manual.
Copying the Multi Pad
1 Press the [3 ] (COPY) button in step 4 above.
2 Select the Multi Pads to be copied by using the [A], [B], [F] and [G] buttons, then press the [7 ]
(OK) button.
The selected Multi Pad(s) is copied to the clipboard.
3 Select the destination location by using the [A], [B], [F] and [G] buttons. If you want to copy the
selected Pad(s) to another bank, press the [8 ] (UP) button to call up the Multi Pad Bank Selec-
tion display, select the desired bank, press the [7 ] (EDIT) button of MENU 1, then select the
destination.
4 Press the [4 ] (PASTE) button to carry out the Copy operation.
6
PSR-S975/S775 Reference Manual 81
6
Music Finder
Music Finder
Contents
Creating a Set of Favorite Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Editing Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
• Deleting the Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Saving the Records as a Single File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
• Calling up the Records from a Music Finder file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Even though the Search function lets you efficiently look for Music Finder Records, you may want to create a
custom “folder” of your favorite Records—so you can quickly call up the panel settings, song data and Style
data you use frequently.
1 Select the desired Record from the MUSIC FINDER display.
2 Press the [H] (ADD TO FAVORITE) button, then press the [G] (YES) button to add the
selected Record to the FAVORITE page.
3 Select the FAVORITE page by using the TAB [E][F] buttons, and check to see if the
Record has been added.
As with the ALL page, you can select the Record in the FAVORITE page then start your performance.
Creating a Set of Favorite Records
Deleting Records from the FAVORITE Page
1 Select the Record you want to delete from the FAVORITE page.
2 Press the [H] (DELETE FROM FAVORITE) button, then press the [G] (YES) button to actually
delete the Record.
2
3
82 PSR-S975/S775 Reference Manual
6
Music Finder
You can create your original Record by editing an existing Record. Your edits can be replaced with those of the
current Record, or can be saved as a new separate Record.
1 Select the desired Record to be edited in the MUSIC FINDER display.
2 Press the [8 ] (RECORD EDIT) button to call up the EDIT display.
3 Edit the Record.
To cancel and quit the Edit operation, press the [8 ] (CANCEL) button.
Editing Records
[A]
MUSIC For entering the music title. Pressing the [A] button calls up the display for
entering the music title.
[B]
KEYWORD For entering the keyword to be used when executing the Search operation.
Pressing the [B] button calls up the display for entering the keyword.
[C]
STYLE/SONG/
AUDIO
Changes the Style. Pressing the [C] button calls up the Style Selection dis-
play. After selecting the desired Style, press the [EXIT] button to return back
to the EDIT display.
For SONG or AUDIO Records, this field cannot be edited.
[D] BEAT Changes the beat (time signature) of the Record for search purposes.
For SONG or AUDIO Records, this field cannot be edited.
NOTE Keep in mind that the Beat setting made here is only for the Music Finder search function; this does
not affect the actual Beat setting of the Style itself.
[E]
FAVORITE Selects whether the edited Record is added to the FAVORITE page or not.
[1 ]
TEMPO Changes the Tempo. For SONG or AUDIO Records, this field cannot be
edited.
[2 ]
SECTION Selects the sections of Style that are called up as a set when the Record is
selected. You can start the Record with the section selected by the [2 ]
buttons. When the section finishes, Style playback automatically shifts to the
section selected by the [4 ] buttons. For SONG or AUDIO Records, this
field cannot be edited.
[4 ]
[5 ]/
[6 ]
GENRE Selects the desired genre.
[7 ]
GENRE NAME Creates a new genre.
PSR-S975/S775 Reference Manual 83
6
Music Finder
4 Save the edited Record.
When creating a new Record
Press the [J] (NEW RECORD) button. The Record is added to the ALL page.
When overwriting an existing Record
Press the [8 ] (OK) button.
Deleting the Record
By carrying out the Delete operation, the Record is deleted from all pages (ALL, FAVORITE and SEARCH
1/2).
1 Select the Record to be deleted from the MUSIC FINDER display.
2 Press the [8 ] (RECORD EDIT) button to call up the EDIT display.
3 Press the [I] (DELETE RECORD) button.
To cancel the Delete operation and return to the MUSIC FINDER display in step 1, press [H] (NO); to
return to the EDIT display in step 2, press [I] (CANCEL).
4 Press the [G] (YES) button to delete the current Record.
The Music Finder feature handles all the Records including the presets and additionally created Records as a
single file. Keep in mind that individual Records (panel settings, Song, audio and Style files) cannot be handled
as separate files.
1 Press the [7 ] (FILES) button in the MUSIC FINDER display to call up the File
Selection display.
2 Press the TAB [E][F] buttons to select the location for saving (USER/USB).
3 Press the [6 ] (SAVE) button.
The Character Entry window is called up. If necessary, rename the file. For instructions, refer to “Basic
Operations” in the Owner’s Manual.
4 Press the [8 ] (OK) button to save the file.
All Records are saved together as a single Music Finder file.
Saving the Records as a Single File
84 PSR-S975/S775 Reference Manual
6
Music Finder
Calling up the Records from a Music Finder file
By selecting a Music Finder file, you can recall the Records saved to the USER or USB drive as a file.
1 Press the [7 ] (FILES) button in the MUSIC FINDER display to call up the File
Selection display.
2 Use the TAB [E][F] buttons to select the location to which the file is saved.
3 Press the [A]–[J] buttons to select the desired Music Finder file.
A message appears, prompting you to select one of the following options.
[G] REPLACE All Music Finder Records currently in the instrument are deleted and
replaced with the Records of the selected file.
NOTICE
Selecting “REPLACE” automatically deletes all your original Records from internal memory.
Make sure that all important data has been archived to another location beforehand.
[H] APPEND The Records called up are added to the Records currently in the instru-
ment.
[I] CANCEL Cancels the file selection operation.
7
7
PSR-S975/S775 Reference Manual 85
Registration Memory
Registration Memory
Contents
Editing the Registration Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Disabling Recall of Specific Items (Freeze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Calling Up Registration Memory Numbers in Order (Registration Sequence) . . . . . . . . . . . . . 87
• Saving the Registration Sequence Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
• Using the Registration Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
You can edit (rename and delete) each of Registration Memories contained in the Bank.
1 Select the Registration Memory Bank containing the Registration Memory to be
edited.
Press the REGISTRATION BANK [+]/[-] buttons simultaneously to call up the Registration Bank
Selection display, then press one of the [A]–[J] buttons to select the desired Bank.
2 Press the [7 ] (EDIT) button of MENU 1 to call up the REGISTRATION EDIT display.
3 Select a particular Registration Memory to be edited by pressing any of the [A]–[D]
and [F]–[I] buttons.
4 Press the [1 ] button to rename or the [5 ] button to delete the selected
Registration Memory.
For details on the Rename and Delete operations, refer to “Basic Operations” in the Owners Manual.
5 Save the current Bank containing the edited Registration Memories.
Press the [8 ] (UP) button to call up the Registration Memory Selection display, then press the [6 ]
(SAVE) button of MENU 2 to carry out the Save operation. For details, refer to “Basic Operations” in the
Owner’s Manual.
Editing the Registration Memory
86 PSR-S975/S775 Reference Manual
7
Registration Memory
Registration Memory lets you recall all the panel setups you made with a single button press. However, there
may be times that you want certain items to remain the same, even when switching Registration Memory
setups. When you want to switch the Voice settings but still maintain the Style settings, for example, you can
“freeze” only the Style settings and have those Style settings remain, even when you select another
Registration Memory number.
1 Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [C] REGIST SEQUENCE/FREEZE TA B [ F] FREEZE
2 Use the [1 ]–[3 ] buttons to select the desired item, then use the [4 ]/
[5 ] buttons to enter or remove the checkmark.
Items having checkmarks will be frozen when the [FREEZE] button on the panel is turned on.
3 Press the [EXIT] button to exit from the operation display.
NOTICE
Settings in the FREEZE display are automatically saved to the instrument when you exit from this display. However, if you turn the power
off without exiting from this display, the settings will be lost.
4 Press the [FREEZE] button on the panel to turn the Freeze function on.
With this operation, you can “freeze” or maintain checkmarked items, even when you select another
Registration Memory number. To turn off the Freeze function, press the [FREEZE] button again.
Disabling Recall of Specific Items (Freeze)
PSR-S975/S775 Reference Manual 87
7
Registration Memory
As convenient as the Registration Memory buttons are, there may be times during a performance when you
want to quickly switch between settings. The convenient Registration Sequence function lets you call up the
eight setups in any order you specify, by simply using the TAB [E][F] buttons (in the Main display) or the
pedal as you play.
1 If you intend to use a pedal or pedals to switch the Registration Memory number,
connect the optional pedals to the appropriate FOOT PEDAL jacks.
For instructions, refer to chapter 10 of the Owner’s Manual.
2 In the REGISTRATION BANK display, select the desired Bank to be programmed.
3 Call up the operation display.
[FUNCTION] TA B [ E] MENU 1 [C] REGIST SEQUENCE/FREEZE TAB [E]
REGISTRATION SEQUENCE
4 If you use a pedal, specify here how the pedal will be used—to advance or to reverse
through the sequence.
Use the [B] or [C] button to select the pedal for advancing or reversing through the Registration Sequence.
For example, if two pedals are connected, Pedal 1 is used for advancing while Pedal 2 is used for
reversing. Note that the pedal settings here (other than OFF) will take priority over the settings in the
FOOT PEDAL display (page 116). If you want to use the pedal for a function other than Registration
Sequence, make sure to set this to OFF.
5 Program the Sequence order, from left to right.
Press one of the REGISTRATION MEMORY [1]–[8] buttons on the panel, then press the [6 ]
(INSERT) button to input the number.
Calling Up Registration Memory Numbers in Order (Registration Sequence)
4
6
7
Indicates the name of the currently
selected Registration Memory Bank.
Indicates the Registration Memory
numbers, in the order of the current
Registration Sequence.
88 PSR-S975/S775 Reference Manual
7
Registration Memory
6 Use the [D] (SEQUENCE END) button to determine how Registration Sequence
behaves when reaching the end of the sequence.
• STOP ............... Pressing the TAB [F] button or the “advance” pedal has no effect. The sequence is
“stopped.
• TOP.................. The sequence starts again at the beginning.
• NEXT BANK ... The sequence automatically moves to the beginning of the next Registration Memory Bank
in the same folder.
7 Press the [F] (REGIST SEQ. ENABLE) button to turn the Registration Sequence
function on.
8 Press the [EXIT] button to exit from the operation display.
After the confirmation message appears, press the [G] (YES) button to store the Registration Sequence
program temporarily.
NOTICE
Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you’ve saved it with the Reg-
istration Memory Bank file. For instructions on saving, see the section below.
Saving the Registration Sequence Settings
The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the
sequence (SEQUENCE END) are included as part of the Registration Memory Bank file. To store your
newly programmed Registration Sequence, save the current Registration Memory Bank file.
1 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the
REGISTRATION BANK Selection display.
2 Press the [6 ] button of MENU 2 to save the Bank file.
For details, refer to “Basic Operations” in the Owner’s Manual.
[1 ]–
[4 ]
Moves the cursor.
[5 ] REPLACE Replaces the number at the cursor position with the currently selected Registra-
tion Memory number.
[6 ] INSERT Inserts the number of the currently selected Registration Memory number to the
cursor position.
[7 ] DELETE Deletes the number at the cursor position.
[8 ] CLEAR Deletes all numbers in the sequence.
PSR-S975/S775 Reference Manual 89
7
Registration Memory
Using the Registration Sequence
1 Select the desired Registration Bank.
2 At the upper right of the Main display, confirm the Registration Sequence.
3 Press the TAB [E] or [F] button, or press the Foot Pedal to select the first Registration
Memory number.
The box appears around the left-most number, indicating that this Registration Memory number is
currently selected.
4 Use the TAB buttons or Foot Pedal during your keyboard performance.
To return to the status in which no Registration Memory number is selected, press the TAB [E] and [F]
buttons simultaneously while the Main display is called up.
NOTE The pedal can be used for Registration Sequence no matter which display is called up (except for the REGIST SEQUENCE display).
8
90 PSR-S975/S775 Reference Manual
8
Microphone/Guitar Input
Microphone/Guitar Input
Contents
Making and Saving the Microphone/Guitar Settings (EQ/CMP). . . . . . . . . . . . . . . . . . . . . . . . . .90
• Saving the Microphone/Guitar Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
• MIC/GUITAR Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
• TALK Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Setting and Editing Vocal Harmony Types (PSR-S975) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
• Setting up the Vocal Harmony Control Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
• Editing the Vocal Harmony Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Editing the Synth Vocoder Types (PSR-S975) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
• Editing the OVERVIEW Tab Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
• Editing the DETAIL Tab Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
This section explains how to make and save the detailed settings for the microphone/guitar.
1 Connect a microphone or guitar, press the [MIC SETTING/VOCAL HARMONY] button
(PSR-S975) or [MIC SETTING] (PSR-S775) button to call up the operation display, then
press the [A] (MIC/GUITAR) button to set it to ON.
This lets you talk into the microphone or play the guitar and hear the changes made while setting the
parameters.
2 Press the [B] (EQ/CMP) button to call up the EQ/CMP SETTING display.
3 Select the desired page, MIC/GUITAR or TALK, by using the TAB [E][F] buttons.
NOTE The settings on the TALK page are the settings that are active when the [F] (TALK) button is on.
4 Use the [A]–[E] buttons to select the specific row (or group) of parameters to be
adjusted.
5 Set the value of specific parameters in the row by using the [1 ]–[6 ] buttons.
For information on each parameter, see pages 91–92.
NOTICE
After setting, go to the EQ/CMP SETTING MEMORY display by pressing the [I] (USER MEMORY) button and save the settings (see
page 91). The settings will be lost if you exit from this display or turn off the power to the instrument without carrying out the Save oper-
ation.
Making and Saving the Microphone/Guitar Settings (EQ/CMP)
3
4
5
PSR-S975/S775 Reference Manual 91
8
Microphone/Guitar Input
Saving the Microphone/Guitar Settings
All the settings (MIC/GUITAR and TALK pages) are saved together as a single file. Up to ten files can be
saved.
1 On the EQ/CMP SETTING display (in step 3 on page 90), press the [I] (USER MEMORY)
button.
2 Press the [6 ] (SAVE) button to save the file to the USER drive.
For details on the naming and saving procedures, refer to “Basic Operations” in the Owner’s Manual.
NOTE The microphone/guitar setting file can be saved only to internal USER drive. If you want to save this setting on the USB flash drive, save the User Effect
file on the display called up via [FUNCTION] TAB [F] MENU 2 [G] SYSTEM TAB [E][F] SETUP FILES [H] USER EFFECT FILES.
MIC/GUITAR Page
3BAND EQ (selected by [A]/[B] buttons)
EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands which can be
boosted or cut as required to tailor the overall frequency response. This instrument features a high-grade
three-band (LOW, MID and HIGH) digital equalizer function for the microphone/guitar sound.
NOISE GATE (selected by [C]/[D] buttons)
This effect mutes the input signal when the input from the microphone/guitar falls below a specified level.
This effectively cuts off extraneous noise, allowing the desired signal (vocal, etc.) to pass.
COMPRESSOR (selected by [C]/[D] buttons)
This effect holds down the output when the input signal from the microphone/guitar exceeds a specified
level. This is especially useful for smoothing out vocals that have widely varying dynamics. It effectively
“compresses” the signal, making soft parts louder and loud parts softer. For a maximum compression
effect, set RATIO to a high setting and adjust the OUT parameter for optimum volume.
Calling Up the Microphone/Guitar Settings Saved to USER
1 Call up the EQ/CMP SETTING MEMORY display.
[MIC SETTING/VOCAL HARMONY] (PSR-S975) or [MIC SETTING] (PSR-S775) button
[B] EQ/CMP SETTING [I] USER MEMORY
2 Press the [A]–[J] buttons to select the desired setting file.
[1 ]/
[3 ]/
[5 ]
Hz Adjusts the center frequency of the corresponding band.
[2 ]/
[4 ]/
[6 ]
dB Boosts or cuts the level of the corresponding band by up to 12 dB.
[1 ] SW (Switch) Turns the Noise Gate on or off.
[2 ] TH. (Threshold) Adjusts the input level at which the gate begins to open.
[3 ] SW (Switch) Turns the Compressor on or off.
[4 ] TH. (Threshold) Adjusts the input level above which the Compressor is applied.
[5 ] RATIO Adjusts the compression ratio. Higher ratios result in a more compressed
sound, with a reduced dynamic range.
[6 ] OUT Adjusts the final output level.
92 PSR-S975/S775 Reference Manual
8
Microphone/Guitar Input
(PSR-S975) PITCH DETECT (selected by [E] button)
Determines how this instrument detects or recognizes the pitch of the microphone sound you input during
performance.
TALK Page
The settings here are for your speech or announcements (NOT your singing performance), and are active
when the [F] (TALK) button is set to ON. All indications and parameters (with the exception of TALK
MIXING below) are the same as in the MIC/GUITAR page. However, the settings are independent from
those in the MIC/GUITAR page.
TALK MIXING (selected by [E] button)
[1 ]/
[2 ]
VOCAL TYPE Set this to obtain the most natural vocal harmony, depending on your
voice.
LOW: Setting for lower voices. This setting is also appropriate for growl-
ing and shouting.
MID: Setting for mid-range voices.
HIGH: Setting for higher voices. This setting is also appropriate for sing-
ing close to the microphone.
FULL: Setting for vocalists having a wide range, from low to high.
[3 ]/
[4 ]
BACKGROUND
NOISE CUT
THRU, 200Hz, 300Hz, 400Hz, 500Hz
This allows you to filter out low noises that would interfere with the Vocal
Harmony effect. A setting of “THRU” turns the noise filter off.
[5 ]/
[6 ]
SPEED 1 (SLOW) – 4 (NORMAL) – 15 (FAST)
Adjusts the response of the Vocal Harmony effect, or how quickly harmo-
nies are generated in response to your voice.
NOTE When the Vocal Harmony’s Pitch Detect Speed of one or both parts of Lead and Harm. are set to “as
Mic Setting” in the DETAIL tab (page 99), this parameter is effective. In other settings, the setting of
the Vocal Harmony’s Pitch Detect Speed is effective.
[1 ] VOLUME Determines the output volume of the microphone sound.
[2 ] PAN Determines the stereo pan position of the microphone sound.
[3 ]REVERB
DEPTH
Determines the depth of the reverb effects applied to the microphone
sound.
[4 ] CHORUS
DEPTH
Determines the depth of the chorus effects applied to the microphone
sound.
[5 ]/
[6 ]
REDUCTION
LEVEL
Determines the amount of reduction to be applied to the overall sound
(excepting the microphone input)—allowing you to effectively adjust the
balance between your voice and the overall instrument sound.
PSR-S975/S775 Reference Manual 93
8
Microphone/Guitar Input
Setting up the Vocal Harmony Control Parameters
You can set which part controls the Vocal Harmony regardless of the current Vocal Harmony Type.
1 Call up the Vocal Harmony Type Selection display.
[MIC SETTING/VOCAL HARMONY] [E] (TYPE)
NOTE Check that the microphone is properly connected (Owner’s Manual, chapter 8) and the settings (Reference Manual, page 90) are adjusted correctly before
setting the Vocal Harmony Control parameters here.
2 Press the [8 ] (SET UP) button to call up the Setup display, then set the value by
using the [2 ]–[5 ] and [7 ] buttons.
For information on each parameter, see page 94.
3 After you finish setting the value, press the [EXIT] button to close the Setup display.
Setting and Editing Vocal Harmony Types (PSR-S975)
94 PSR-S975/S775 Reference Manual
8
Microphone/Guitar Input
Setup Parameters
[2 ]–
[5 ]
VOCODER
CONTROL
The Vocal Harmony effect in the Vocoder and Vocoder-Mono modes is
controlled by the notes you play on the keyboard and/or Song data.
[2 ]
SONG
CHANNEL
MUTE/PLAY
When set to “MUTE,” the channel selected below (to control Harmony)
is muted (turned off) during Song playback. This enables you to sing a
song with harmony, even without backing or accompaniment.
[3 ]
SONG
CHANNEL
OFF/1–16
When set to OFF, Song playback does not affect the Vocal Harmony.
When set to one of the values 1–16, note data (played from a Song on
this instrument or external MIDI sequencer) contained on the corre-
sponding channel is used to control the harmony.
[4 ]
/[5 ]
KEYBOARD
OFF: Keyboard performance does not affect the Vocal Harmony.
UPPER: Notes played to the right of the Split Point control the har-
mony.
LOWER: Notes played to the left of the Split Point control the har-
mony.
NOTE The separate point of the Keyboard settings (OFF/UPPER/LOWER) is Split Point (LEFT).
NOTE When the settings of both keyboard performance and Song data are applied, those settings are
merged to control the harmony.
[7 ] CHORD In Chordal mode, the following parameters determine which data in a
Song is used for chord detection.
OFF: Chords are not detected from the Song data.
XF: Chords of XF format are used for the Vocal Harmony.
1–16: Chords are detected from note data in the specified Song chan-
nel.
NOTE The Vocal Harmony may not work properly regardless of the setting here depending on the Song
data, since the selected Song may contain no chord data or insufficient note data for chord
detection.
PSR-S975/S775 Reference Manual 95
8
Microphone/Guitar Input
Editing the Vocal Harmony Types
This section explains briefly how to create your own Vocal Harmony types, and lists the detailed parameters
for editing. A sum total of sixty types can be created and saved.
1 Call up the Vocal Harmony Type Selection display.
[MIC SETTING/VOCAL HARMONY] [E] TYPE
2 Use the TAB [E][F] buttons to select the VOCAL HARMONY tab.
3 Select a Vocal Harmony type to be edited by using the [A]–[J] buttons.
To call up the other display pages for further selections, press one of the [1 ]–[5 ] buttons.
4 Press the [8 ] (EDIT) button to call up the VOCAL HARMONY EDIT display.
NOTE The VOCAL HARMONY EDIT display can also be called up by using the [8 ] buttons on the MIC/GUITAR SETTING display.
5 Use the TAB [E][F] buttons to call up the desired tab, then edit the Vocal Harmony by
using [A]–[G] buttons and [1 ]–[8 ] buttons.
There are three tabs in the VOCAL HARMONY EDIT display; refer to pages 9699 for editing each tab.
• OVERVIEW ......Edits basic parameters for Vocal Harmony type, including mode, Chordal Type and Vocal
Effect, etc.
• PART ................Adjusts volume and panning, etc. for each of the harmony notes (Harm.1, 2, 3 and Lead).
• DETAIL.............Detailed editing for Vocal Harmony type.
NOTICE
The settings here will be lost if you change to another Vocal Harmony type or you turn the power off without carrying out the Save opera-
tion.
6 Press the [I] (SAVE) button to save your edited Vocal Harmony type.
For instructions on the Save operation, refer to “Basic Operations” in the Owner’s Manual.
NOTE The edited Vocal Harmony Type can be saved only to internal USER drive as a file. If you want to save this to the USB flash drive, save the User Effect file
on the display called up via [FUNCTION] TAB [F] MENU 2 [G] SYSTEM TAB [E][F] SETUP FILES [H] USER EFFECT FILES.
3
3
4
5
5
6
2
96 PSR-S975/S775 Reference Manual
8
Microphone/Guitar Input
Editing the OVERVIEW Tab Parameters
1 Set the value by using the [A]–[C] buttons, [1 ] and [3 ]–[8 ] buttons.
For information on each parameter, see page 97.
2 Press the [F] (HARMONY ASSIGN) button to set how the Vocal Harmony is applied to
your singing voice.
For information on each parameter, see page 97.
3 Press the [G] (VOCAL EFFECT EDIT) button to edit the Vocal Effect.
On the display called up via this operation, use the [3 ]–[5 ] buttons to select the parameter then
use the [6 ]–[7 ] buttons to set the value. If necessary, you can change the Effect Type from the
one selected in step 1 also on this display via the [1 ]/[2 ] buttons.
For information on each parameter, refer to the “Vocal Harmony Parameter List” in the Data List on the
website.
2
1
1
3
PSR-S975/S775 Reference Manual 97
8
Microphone/Guitar Input
OVERVIEW Tab Parameters
HARMONY ASSIGN
For detailed information on each parameter, refer to the “Vocal Harmony Parameter List” in the Data List
on the website.
[A] MODE Determines the mode of the Vocal Harmony effect: Chordal, Vocoder
or Vocoder-Mono. Chordal is for conventional vocal harmonies, while
Vocoder and Vocoder-Mono are for Vocoder effects. (Vocoder-Mono is
for single-note melodies.) When Vocoder or Vocoder-Mono is selected,
the Chordal Type parameter below is not available.
[B]/[C] CHORDAL
TYPE
Determines the particular notes and voicings used for generating the
vocal harmonies. The harmony and lead notes are also shown as nota-
tion in the display. For a list of the Chordal Types, refer to the “Vocal
Harmony Parameter List” in the Data List on the website.
[1 ] BALANCE Lets you set the balance between the lead vocal (your own voice) and
Vocal Harmony. Raising this value increases the volume of the Vocal
Harmony and decreases that of the lead vocal. When this is set to
L<H63 (L: Lead Vocal, H: Vocal Harmony), only the Vocal Harmony is
output; when it is set to L63>H, only the lead vocal is output.
[3 ]–
[6 ]
VOCAL
EFFECT
Determines the Vocal Effect type and the amount of the effect applied
to the lead and harmony vocal sounds.
[3 ]
–[4 ]
TYPE
Determines the specific Vocal Effect type applied to the lead and har-
mony vocal sounds. A wide range of reverb, delay, modulation, distor-
tion and other special effects are available. For a list of the effect types,
refer to the “Vocal Harmony Parameter List” in the Data List on the
website.
[5 ]
LEAD
Determines the amount of Vocal Effect that is applied to the lead vocal
sound.
[6 ]
HARMONY
Determines the amount of Vocal Effect that is applied to the harmony
vocal sound.
[7 ] REVERB Determines the amount of reverb applied to the overall Vocal Harmony
sound, both lead and harmony.
[8 ] CHORUS Determines the amount of chorus effect applied to the overall Vocal
Harmony sound, both lead and harmony.
[1 ]/
[2 ]
TRANS
(TRANSPOSE)
MODE
Determines the amount by which the harmony parts are transposed. A
setting of “0” results in no transposition, while the “Auto” setting
results in automatic transposition. When the mode is set to Vocoder or
Vocoder-Mono, this parameter is available.
Settings: 0, Auto, -3 – +3
[3 ]/
[4 ]
SESSION
TABLE
Determines how the harmonies will be voiced, or what type of chord
will be used in creating the harmonies, according to different musical
styles. This parameter is available only when the mode is set to Chordal
and the type is set to something other than ScaleDiatonic or Parallel.
Settings: Normal, Simple, R&R, UrbanA, UrbanB, Blues7, UrbanC
98 PSR-S975/S775 Reference Manual
8
Microphone/Guitar Input
Editing the PART Tab Parameters
The parameters are arranged in a matrix.
Use the [A]–[E] buttons to select the desired parameter, then edit each of the Vocal
Parts including the Harmony notes (Harm.1, 2, 3) and Lead voice (your own voice) via
the [3 ]–[8 ] buttons.
For information on each parameter, see below.
TRANSPOSE (selected by [A] button)
Determines the pitch transposition for each part. The range for all parts is the same; however, the lead
vocal sound can only be adjusted in octaves. When the Chordal Type is set to ScaleDiatonic, this
parameter changes to Degree. When Pitch Correct is set to OFF, the Lead part is not available. When the
Vocoder or Vocoder-Mono mode is selected, the Harmony parts are not available.
TRANSPOSE Settings
Lead: -3 octaves – +3 octaves
Harmony 1, 2, 3: -36 semitones – +36 semitones
DEGREE Settings
Lead: -3 octaves – +3 octaves
Harmony 1, 2, 3: -3 octaves (-22 scale degrees) – Unison – +3 octaves (+22 scale degrees)
DETUNE (selected by [B] button)
Determines the fine pitch setting for each part. Adjust this to produce a warm chorusing effect, or to
achieve a natural, less-than-perfect vocal sound. When Pitch Correct is set to OFF, the Lead part is not
available.
Settings: -50 cents – +50 cents
[5 ]/
[6 ]
KEY ROOT Determines the root key for the transposition. Use this in combination
with Key Type below to enable modal scale harmony transposition.
When the Chordal Type parameter is set to ScaleDiatonic, this parame-
ter is available.
Settings: C, C#, D, D#, E, F, F#, G, G#, A, A#, B
[7 ]/
[8 ]
KEY TYPE Determines the scale type for the transposition. Use this in combination
with Key Root above to enable modal scale harmony transposition.
When the Chordal Type parameter is set to ScaleDiatonic, this parame-
ter is available.
Settings: Maj, min (Natural), min (Harmonic)
PSR-S975/S775 Reference Manual 99
8
Microphone/Guitar Input
FORMANT (selected by [C] button)
Determines the formant setting for each part. This parameter can be used to finely change the character of
the vocal sound. The higher the value, the more “feminine” the harmony voice becomes. The lower the
value, the more “masculine” the voice. When Pitch Correct is set to Off, the Lead part is not available.
Settings: -62 – +62
PAN (selected by [D] button)
Determines the pan position setting for each part. Setting each vocal part to a different pan position, with
the lead vocal at center, for example, results in a naturally wide stereo sound.
Settings: L63 (Left) – C (Center) – R63 (Right)
VOLUME (selected by [E] button)
Determines the volume setting for each part. Use this to adjust the relative level balance among the vocal
parts.
Settings: 0–127
PITCH CORRECT (set by [7 ]–[8 ] buttons)
Determines how Pitch Correct affects your voice. For information on each parameter, refer to the “Vocal
Harmony Parameter List” in the Data List on the website.
Settings: OFF, SOFT1, SOFT2, HARD
Editing the D ETAIL Tab Parameters
Use the [2 ]–[4 ] buttons to select the desired parameter, then set the value of
the selected parameter by using the [5 ]/[6 ] buttons.
For information on each parameter, refer to the “Vocal Harmony Parameter List” in the Data List on the
website.
10 0 PSR-S975/S775 Reference Manual
8
Microphone/Guitar Input
This section explains how to create your own Synth Vocoder types, and lists the detailed parameters for
editing. A sum total of sixty types (Synth Vocoder and Vocal Harmony types) can be created and saved.
NOTE For information on “Editing the Vocal Harmony Types,” refer to page 95.
1 Call up the Vocal Harmony Type Selection display.
[MIC SETTING/VOCAL HARMONY] [E] TYPE
2 Use the TAB [E][F] buttons to select the SYNTH VOCODER tab.
3 Select a Synth Vocoder type to be edited by using the [A]–[J] buttons.
4 Press the [8 ] (EDIT) button to call up the SYNTH VOCODER EDIT display.
NOTE The SYNTH VOCODER EDIT display can also be called up by using the [8 ] buttons on the MIC/GUITAR SETTING display.
5 Use the TAB [E][F] buttons to call up the desired tab, then edit the Synth Vocoder by
using [A]–[E], [G] and [J] buttons and [1 ]–[8 ] buttons.
There are two tabs in the SYNTH VOCODER EDIT display; refer to pages 101–103 for editing each tab.
• OVERVIEW ..... Edits basic parameters for Synth Vocoder type, including Carrier, Vocoder Attack/Release
and HPF (High Pass Filter), etc.
• DETAIL ............ Detailed editing for Synth Vocoder type.
NOTICE
The settings here will be lost if you change to another Synth Vocoder type or you turn the power off without carrying out the save opera-
tion.
6 Press the [I] (SAVE) button to save your edited Synth Vocoder type.
For instructions on the Save operation, refer to “Basic Operations” in the Owner’s Manual.
NOTE The edited Vocal Harmony Type can be saved only to internal USER drive as a file. If you want to save this to the USB flash drive, save the User Effect file
on the display called up via [FUNCTION] TAB [F] MENU 2 [G] SYSTEM TAB [E][F] SETUP FILES [H] USER EFFECT FILES.
Editing the Synth Vocoder Types (PSR-S975)
3
5
5
6
2
5
5
6
4
PSR-S975/S775 Reference Manual 101
8
Microphone/Guitar Input
Editing the OVERVIEW Tab Parameters
1 Use the [A]–[E] (or [J]) buttons to select the parameter to be adjusted, then set the
value by using the [1 ]–[8 ] buttons or sliders.
For information on each parameter, see pages 102–103.
2 Press the [G] (VOCAL EFFECT EDIT) button to edit the Vocal Effect.
On the display called up via this operation, use the [3 ]–[5 ] buttons to select the parameter then
use the [6 ]–[7 ] buttons to set the value. If necessary, you can change the Effect Type from the
one selected in step 1 also on this display via the [1 ]/[2 ] buttons.
For information on each parameter, refer to the Data List on the website.
2
102 PSR-S975/S775 Reference Manual
8
Microphone/Guitar Input
CARRIER (set by [A]/[B] buttons)
Selects the musical instrument sound used as the source (Carrier) for the Synth Vocoder. (The Carrier
serves as the basic sound over which the vocal characteristics are applied.)
VOCODER parameters (selected by [C]/[D] buttons)
HPF (High Pass Filter) parameters (selected by [C]/[D] buttons)
FORMANT parameters (selected by [C]/[D] buttons)
CARRIER parameters (selected by [E]/[J] buttons)
[1 ] ATTACK Determines the attack time of the Synth Vocoder sound. The higher the
value, the slower the attack.
Settings: 1ms–200ms
[2 ] RELEASE Determines the release time of the Synth Vocoder sound. The higher
the value, the slower the decay.
Settings: 10ms–3000ms
[3 ]FREQ.
(Frequency)
Determines the HPF cutoff frequency for the microphone input sound.
Setting this to a low value results in a minimally processed input
sound—in other words, close to the original. Setting this to higher val-
ues emphasizes the higher frequency consonant and sibilant sounds
(making words easier to understand).
Settings: Thru, 500Hz–16kHz
[4 ] LEVEL Determines the level of the microphone sound output from the HPF.
Settings: 0–127
[5 ] SHIFT Determines the amount (in BPF) by which the cutoff frequency value
of the BPFs (for the Inst Input) is shifted. This parameter can be used to
change the character of the Vocoder sound.
Settings: -2, -1, +0, +1, +2
[6 ] OFFSET Adjusts the cutoff frequencies of all BPFs (for the Inst Input) finely.
This parameter can be used to finely change the character of the
Vocoder sound.
Settings: -63 – +0 – +63
[1 ] VOLUME Determines the level of the Carrier for the Synth Vocoder sound.
Settings: 0–127
[2 ] OCTAVE Determines the octave setting of the Carrier for the Synth Vocoder
sound.
Settings: -2 – +2
[3 ] NOISE Determines the noise level which is input to the Synth Vocoder. This
can be used to emphasize sibilant and plosive sounds, and make the
speech-like characteristics more pronounced.
Settings: 0–127
PSR-S975/S775 Reference Manual 103
8
Microphone/Guitar Input
EFFECT parameters (selected by [E]/[J] buttons)
Editing the DETAIL Tab Parameters
Use the [B]–[E] buttons to select the BAND PASS FILTER 1–5 or 6–10, then set the
value by using the [1 ]–[5 ] buttons.
NOTE Feedback (howling) may result depending on the setup settings. Be careful especially when you increase values.
BAND PASS FILTER 1–10 parameters
Determines each output gain of the BPF 1–10 for the Inst Input (keyboard performance sound). The BPF 1
corresponds to the lowest Formant while the BPF 10 corresponds to the highest Formant.
Settings: -18dB – +18dB
[4 ]/
[5 ]
TYPE Determines the specific type of effect applied to the lead Synth Vocoder
sound. A wide range of reverb, delay, modulation, distortion and other
special effects are available. You can edit the vocal effect by pressing
the [G] (VOCAL EFFECT EDIT) button (step 2 on page 101).
For a list of the effect types, refer to the Data List on the website.
[6 ] DEPTH Determines the amount of the effect (selected in TYPE above) applied
to the overall Synth Vocoder sound.
[7 ] REVERB Determines the amount of reverb applied to the overall Synth Vocoder
sound.
[8 ] CHORUS Determines the amount of chorus effect applied to the overall Synth
Vocoder sound.
9
9
104 PSR-S975/S775 Reference Manual
Mixing Console
Mixing Console
Contents
Editing VOL/VOICE Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Editing FILTER Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Editing TUNE Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Editing EFFECT Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
• Adjusting the Effect Depth for Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
• Selecting an Effect Type for each Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
• Editing and Saving Your Original Effect Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Editing EQ Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
• Editing Part EQ Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
• Editing and Saving Your Original Master EQ (MEQ) Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Editing Master Compressor (CMP) Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
• Saving Master Compressor Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Regarding the Mixing Console, the Reference Manual covers detailed descriptions of each parameter while the
Owner’s Manual covers the basic instructions including the Save operation. You can edit various parameters for
the Parts called up via the [MIXER/EQ] button, then save your edits for future recall.
For a visual indication of the signal flow and configuration of the Mixing Console, refer to the Block Diagram
on page 115.
Use the TAB [E]/[F] buttons to select the various pages that follow.
Editing VOL/VOICE Parameters
[B]/[C]/
[G]/[H]
VOICE Allows you to re-select the Voices for each part.
NOTE Note the following operation limitations.
For each Style channel, you can select the Voices for recording on pages 33 and 34.
For each Style or Song channel, you cannot select Voices in the USER drive.
For each Multi Pad, you cannot change the Voice.
When a GM Song is selected, only a Drum Kit Voice can be selected for channel 10 (in the SONG
CH9-16 page).
NOTE For a Style or Song channel, calling up a rhythm/percussion Voice (Drum Kit, etc.) will replace the
channel settings with those for the new Voice. In such a case, the original settings may not be
restored even if you re-select the original Voice. To restore the original sound, select the same Style
or Song again without carrying out the Save operation.
[D]/[I] PANPOT Determines the stereo position of the selected part (channel).
[E]/[J] VOLUME Determines the volume of each part or channel, giving you fine control
over the balance of all the parts.
PSR-S975/S775 Reference Manual 105
9
Mixing Console
Editing FILTER Parameters
[D]/[I] HARMONIC
CONTENT
Allows you to adjust the Resonance (page 17) for each part.
[E]/[J] BRIGHTNESS Determines the brightness of the sound for each part by adjusting the Cut-
off Frequency (page 17).
106 PSR-S975/S775 Reference Manual
9
Mixing Console
Editing TUNE Parameters
[A]/[B]/
[F]/[G]
PORTAMENTO
TIME
Portamento is a function that creates a smooth transition in pitch from the
first note played on the keyboard to the next. The Portamento Time deter-
mines the pitch transition time. Higher values result in a longer pitch
change time. Setting this to “0” results in no effect. This parameter is
available when the selected keyboard part is set to MONO (page 16).
[C]/[H] PITCH BEND
RANGE
Determines the range of the [PITCH BEND] wheel for each keyboard
part. The range is from “0” to “12” with each step corresponding to one
semitone.
[D]/[I] OCTAVE Determines the range of the pitch change in octaves, over two octaves up
or down for each keyboard part. The value set here is added to the setting
made via the UPPER OCTAVE [-]/[+] buttons.
[E]/[J] TUNING Determines the pitch of each keyboard part in cents.
NOTE In musical terms a “cent” is 1/100th of a semitone. (100 cents equal one semitone.)
[1 ]–
[3 ]
TRANSPOSE Allows you to set transposition for the overall sound of the instrument
(MASTER), Song playback (SONG), or the keyboard pitch (KBD),
respectively. Please note that the “KBD” setting also transposes the pitch
of Style playback and the Multi Pads (since these are also affected by key-
board play in the left-hand section).
PSR-S975/S775 Reference Manual 107
9
Mixing Console
This instrument features six Effect Blocks, giving you powerful tools to richly enhance the sounds of the
instrument or completely transform them. The Effects are divided into the following groups:
Reverb, Chorus:
The Effects of these Blocks are applied to the overall sound or all Parts. In each of these Effect Blocks, you
can select only one Effect Type at a time and adjust the Send Level (Depth) for each Part as well as the
Return Level for all Parts.
DSP1:
When the “Connection” parameter is set to “System” in step 2 of page 110, the Effects of this Block are
applied only to the Style and Song sounds. In this status, you can select only one Effect Type at a time and
adjust the Send Level (Depth) for each Part as well as Return Level for all Parts. When the “Connection”
parameter is set to “Insertion,” the Effect of this Block is applied to a specific channel of the Style and Song.
DSP2-4:
The Effects of these Blocks are applied to a specific Part or Channel, with the exception of the Multi Pads
and microphone/guitar input. Different Effect Types can be selected for each of the available Parts or
Channels.
Adjusting the Effect Depth for Each Part
Use the [B]–[E] or [G]–[J] buttons to select the desired Effect Block, then use the [1 ]–[8 ] buttons
to adjust the Effect Depth for each Part.
Selecting an Effect Type for each Block
This section covers how to change the Effect Type of each Effect Block. The settings here can be saved to a
Registration Memory, Song or Style.
1 Call up the desired page from PANEL, STYLE or SONG by pressing the [MIXER/EQ]
button, repeatedly, if necessary.
Editing EFFECT Parameters
108 PSR-S975/S775 Reference Manual
9
Mixing Console
2 In the EFFECT page, press the [F] (TYPE) button to call up the Effect Type Selection
display.
3 (PSR-S975) Press the [A] button.
4 Use the [1 ]/[2 ] buttons to select the Effect Block.
Effect
Block
Effect-applicable
parts
Effect characteristics
REVERB All parts Recreates the warm ambience of playing in a concert hall or jazz
club.
CHORUS All parts Produces a richly textured sound as if several parts are being played
simultaneously. In addition, other type effects (such as reverb, delay,
etc.) can also be selected in this effect block.
DSP1 Style part, Song
channel 1–16
In addition to Reverb and Chorus, a wide variety of Effect Types are
provided, such as Distortion and Wah.
4,
7 5,
7
6
3
(PSR-S975)
4 5 7
(PSR-S775)
PSR-S975/S775 Reference Manual 109
9
Mixing Console
5 Use the [3 ]/[4 ] buttons to select the Part to which you want to apply the
effect.
Note that a Part cannot be selected if “REVERB,” “CHORUS,” or “DSP1” (when the “Connection”
parameter is set to “System;” see page 110) is selected. This is because only one of the Effect Types can be
selected to be commonly applied to all available Parts.
6 (PSR-S975) Press the [B] button.
7 (PSR-S975) Use the [1 ]/[2 ] buttons to select the Category, and then use the
[3 ]–[5 ] buttons to select the Effect Type.
(PSR-S775) Use the [5 ]/[6 ] buttons to select the Category, and then use the
[7 ]/[8 ] buttons to select the Effect Type.
Note that the Reverb Block is not divided into any Categories.
If you want to edit detailed Parameters of the selected Effect Type, press the [H] (PSR-S975) or [F] (PSR-
S775) button. For details, refer to the next section.
8 Save the Effect Settings to a Registration Memory, Song or Style.
For instructions, refer to the Owner’s Manual.
Editing and Saving Your Original Effect Type
You can edit detailed parameters of the selected Effect Type, and these settings can be saved as your original
Effect Type as well as to a Registration Memory, Style or Song as described in the previous section. This
section covers how to save the settings as an original Effect Type.
1 Once you’ve selected an Effect Block and Effect Type in the previous section, press
the [H] (PSR-S975) or [F] (PSR-S775) button to call up the display for editing the effect
parameters.
DSP2,
DSP3,
DSP4
RIGHT 1, RIGHT 2,
LEFT, Song channel
1–16, MIC/GUI-
TAR*
In addition to Reverb and Chorus, a wide variety of Effect Types are
provided, such as Distortion and Wah. For each of DSP2–4, you can
select one of the Parts or Channels listed at left. When you select
“RIGHT2” for DSP2, for example, the DSP2 Effect is applied only to
the Right 2 part. Note that if you select a Song or Style which needs
the DSP2–4 Blocks, the Part assignment of these three Blocks will be
changed automatically with last priority according to the data.
* Available only for DSP4. If you want to apply a certain Effect only to the microphone or
guitar sound, select “MIC/GUITAR” for the DSP4.
Effect
Block
Effect-applicable
parts
Effect characteristics
(PSR-S975) (PSR-S775)
110 PSR-S975/S775 Reference Manual
9
Mixing Console
2 Use the [3 ]–[5 ] buttons to select a parameter then use the [6 ]/[7 ]
buttons to edit the value.
When Reverb, Chorus, or DSP1 is selected as the Effect Block, you can adjust the Return Level via the
[8 ] (RETURN LEVEL) button. If you want to change the Effect Type, use the [1 ]/[2 ]
buttons.
NOTE (PSR-S975) You can also edit the parameter on the display shown in step 1. Use the [D]/[I] or [E]/[J] buttons to select the desired parameter, then use the
[1 ]–[8 ] buttons to adjust the Effect parameter value.
3 If DSP2, 3 or 4 is selected as the Effect Block, edit the Variation parameter if desired.
Press the [8 ] (VARI. DETAIL) button to call up the Variation parameter, select a parameter via the
[2 ]–[4 ] buttons, and then use the [5 ]/[6 ] buttons to edit the value. This parameter is
effective only when the [DSP VARI.] button lamp lights on the panel. To close this display, press the
[EXIT] button.
4 Press the [I] (SAVE) button to call up the display for the Save operation.
5 Use the [3 ]–[5 ] buttons to select the destination for saving the settings as a
User Effect.
If necessary, change the User Effect name. Press the [6 ] (RENAME) button to call up the Character
Entry window, enter the name, and then press the [8 ] (OK) button.
6 Press the [8 ] (OK) button to carry out the Save operation.
7 Press the [EXIT] button to return to the previous display.
The saved User Effect can be selected from the “User” category of the corresponding Effect Block
(page 109).
2 3
4
5
6
PSR-S975/S775 Reference Manual 111
9
Mixing Console
Equalizer (also called “EQ”) is a sound processor that divides the frequency spectrum into multiple bands
that can be boosted or cut as required to tailor the overall frequency response.
The “EQ” page lets you adjust the EQ for each corresponding part, while the “MEQ” page lets you make
overall EQ adjustments for the entire instrument.
Editing Part EQ Parameters
Editing EQ Parameters
[D]/[I] EQ HIGH Boosts or attenuates the high EQ band for each part.
[E]/[J] EQ LOW Boosts or attenuates the low EQ band for each part.
112 PSR-S975/S775 Reference Manual
9
Mixing Console
Editing and Saving Your Original Master EQ (MEQ) Type
This instrument is equipped with a high-grade eight-band digital EQ. You can select one of the five preset EQ
types, or can even create your own custom EQ settings by adjusting the frequency bands, and save the
settings to one of two User Master EQ types.
NOTE Master EQ cannot be applied to audio playback or the metronome sound.
1 Use the [A]/[B] buttons to select the desired EQ type.
Standard:
Standard EQ settings in which the instrument's characteristics are optimally brought out.
Mellow: Soft and mellow EQ settings in which high-frequency bands are reduced slightly.
Powerful: Powerful EQ settings in which all frequency sounds are emphasized. This can be used to boost
the music for parties, etc.
With Subwoofer: Custom EQ settings in which low-frequency bands are reduced. This is an optimum
setting for using this instrument along with a subwoofer, such as the KS-SW100 (sold separately).
Flat: Flat EQ settings. The gain of each frequency is set to 0dB.
User1/2: Your own custom EQ settings stored in step 4.
2 Use the [E]/[J] buttons to move the cursor to the GAIN row, then adjust the GAIN level
to boost or cut each of the eight bands.
Use the [1 ]–[8 ] buttons to adjust the level. Changing the value while the [E] or [J] button is held
lets you boost or cut all the eight bands at the same time.
3 If desired, adjust the Q (bandwidth) and the FREQ (center frequency) of each band.
To adjust the bandwidth (also called “Shape” or “Q”), use the [C]/[H] buttons to move the cursor to the Q
row, then use the [2 ]–[7 ] buttons. The higher the value of Q, the narrower the band width.
To adjust the FREQ (center frequency), use the [D]/[I] buttons to move the cursor to the FREQ row, then
use the [1 ]–[8 ] buttons. The available FREQ range is different for each band.
4 Press the [F] or [G] (STORE 1 or 2) button to carry out the Store operation.
In the Character Entry window called up via this operation, enter the name, and then press the [8 ] (OK)
button to actually store your settings as a User Master EQ Type, which can be called up via the [A]/[B]
buttons.
2,
3
4
1
PSR-S975/S775 Reference Manual 113
9
Mixing Console
Compressor is an effect commonly used to limit and compress the dynamics (softness/loudness) of an audio
signal. For signals that vary widely in dynamics, such as vocals and guitar parts, it “squeezes” the dynamic
range, effectively making soft sounds louder and loud sounds softer. When used with gain to boost the overall
level, this creates a more powerful, more consistently high-level sound.
This instrument features the Master Compressor applied to the entire sound of this instrument. Although the
preset Master Compressor settings are provided, you can create and save your original Master Compressor by
adjusting the related parameters.
NOTE Master Compressor cannot be applied to audio playback or the metronome sound.
Editing Master Compressor (CMP) Parameters
[G] ON/OFF Turns the Master Compressor effect on or off.
[2 ]/
[3 ]
TYPE Selects a Master Compressor type.
Standard: Standard Compressor settings.
Lite: Light Compressor settings in which the effect is slight.
Moderate: Moderate Compressor settings in which the effect is moder-
ately pronounced.
Dance Floor: Relatively powerful Compressor settings to emphasize
lower pitches.
Punchy: Highly exaggerated Compressor settings.
User1–5: Your own custom Compressor settings saved in the next sec-
tion.
[4 ] THRESHOLD
OFFSET
Determines the threshold (minimum level at which compression starts).
[5 ] RATIO OFFSET Determines the ratio of compression (how much the dynamic range is
compressed).
[7 ] GAIN OFFSET Determines the output level.
Displays the Gain Reduc-
tion (compressed level) and
output level.
114 PSR-S975/S775 Reference Manual
9
Mixing Console
Saving Master Compressor Settings
The Master Compressor settings you have edited can be saved as a User Compressor type.
1 Press the [I] (SAVE) button to enter the USER MASTER COMPRESSOR display.
2 Select the destination to which the User Master Compressor is to be saved, by using
the [3 ]–[5 ] buttons.
If necessary, change the User Master Compressor name. Press the [6 ] (RENAME) button to call up
the Character Entry window, enter the name then press the [8 ] (OK) button.
3 Press the [8 ] (OK) button to carry out the Save operation.
4 Press the [EXIT] button to return to the previous display.
The saved Master Compressor type is shown in the TYPE selection list.
2
1
3
PSR-S975/S775 Reference Manual 115
9
Mixing Console
PSR-S975
PSR-S775
Block Diagram
Connection =
System Effect
Connection =
Insertion Effect
Connection =
System Effect
Connection =
Insertion Effect
10
10
116 PSR-S975/S775 Reference Manual
Connections
Connections
Contents
Footswitch/Foot Controller Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
• Assigning a Specific Function to Each Pedal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
MIDI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
• MIDI System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
• MIDI Transmit Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
• MIDI Receive Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
• Bass Note Settings for Style Playback via MIDI Receive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
• Chord Type Settings for Style Playback via MIDI Receive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Connecting with an iPhone/iPad via Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
• Infrastructure Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
• Access Point Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Assigning a Specific Function to Each Pedal
The functions of the foot pedals connected to the FOOT PEDAL [1]/[2] jacks can be changed individually
from the default settings (sustain, etc.)—for example, letting you use the footswitch to start/stop Style
playback, or use the foot controller to produce pitch bends.
NOTE For information on how to connect a foot pedal or what kinds of pedals can be connected, refer to the Owner’s Manual, chapter 10.
1 Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [D] CONTROLLER TAB [E] FOOT PEDAL
2 Use the [A]/[B] buttons to select one of the two foot pedals to which the function is to
be assigned.
On the display, the numbers 1 and 2 correspond to the FOOT PEDAL jacks [1] and [2] respectively.
3 Use the [1 ] buttons to select the function to be assigned to the pedal specified in
step 2.
For information on available functions, see pages 117–119.
NOTE You can also assign other functions to the pedal—Punch in/out of Song (page 66) and Registration Sequence (page 87). If you assign multiple functions
to the pedal, the priority is: Punch in/out of Song Registration Sequence Functions assigned here.
Footswitch/Foot Controller Settings
2
3
5
4
PSR-S975/S775 Reference Manual 117
10
Connections
4 Use the [2 ]–[8 ] buttons to set the details of the selected functions (the part
for which the function is applied, etc.).
The available parameters differ depending on the function selected in step 3.
5 If necessary, set the polarity of the pedal by using the [I] button.
Pedal on/off operation may differ depending on the particular pedal you’ve connected to the instrument.
For example, pressing down on one pedal may turn the selected function on, while pressing a different
make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation.
Assignable Pedal Functions
For functions indicated with “*”, use only the foot controller; proper operation cannot be done with a
footswitch.
ARTICULATION 1/2 When you use a Super Articulation Voice that has an effect assigned to the
pedal/footswitch, you can enable the effect by pressing the pedal/footswitch.
You can turn this pedal function on or off for each keyboard part on this dis-
play.
VOLUME* Allows you to use a foot controller to control the volume. You can turn this
pedal function on or off for each keyboard part on this display.
SUSTAIN Allows you to use a pedal to control sustain. When you press and hold the
pedal, all notes played on the keyboard have a longer sustain. Releasing the
pedal immediately stops (damps) any sustained notes. You can turn this pedal
function on or off for each keyboard part on this display.
SOSTENUTO Allows you to use a pedal to control the Sostenuto effect. If you play a note or
chord on the keyboard and press the pedal while holding the note(s), the notes
will sustain as long as the pedal is held. However, all subsequent notes will not
sustain. This makes it possible to sustain a chord, for example, while other
notes are played staccato. You can turn this pedal function on or off for each
keyboard part on this display.
NOTE This function will not affect any of the Organ Flutes and only some of the Super Articulation Voices, even if
this has been assigned to the foot pedals.
SOFT Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces
the volume and changes the timbre of the notes you play. This is effective only
for certain appropriate Voices. You can turn this pedal function on or off for
each keyboard part on this display.
GLIDE When the pedal is pressed, the pitch changes, and then returns to normal pitch
when the pedal is released. You can turn this pedal function on or off for each
keyboard part on this display.
UP/DOWN: Determines whether the pitch change goes up (is raised) or down
(is lowered).
RANGE: Determines the range of the pitch change, in semitones.
ON SPEED: Determines the speed of the pitch change when the pedal is
pressed.
OFF SPEED: Determines the speed of the pitch change when the pedal is
released.
PORTAMENTO The portamento effect (a smooth slide between notes) can be produced while
the pedal is pressed. Portamento is produced when notes are played legato style
(i.e., a note is played while the preceding note is still held). The portamento
time can also be adjusted from the Mixing Console display (page 106). You
can turn this pedal function on or off for each keyboard part on this display.
NOTE This function will not affect any of the Organ Flutes and only some of the Super Articulation Voices, even if
this has been assigned to the foot pedals.
118 PSR-S975/S775 Reference Manual
10
Connections
PITCH BEND* Allows you to bend the pitch of notes up or down by using the pedal. You can
turn this pedal function on or off for each keyboard part on this display.
UP/DOWN: Determines whether the pitch change goes up (is raised) or down
(is lowered).
RANGE: Determines the range of the pitch change, in semitones.
MODULATION* Applies modulation effects, such as vibrato, to notes played on the keyboard.
You can turn this pedal function on or off for each keyboard part on this dis-
play.
MODULATION (ALT) This is a slight variation on MODULATION above, in which the effects (wave-
form) can be alternately turned on/off by each press of the pedal/footswitch.
You can turn this pedal function on or off for each keyboard part on this dis-
play.
DSP VARIATION Same as the [DSP VARI.] button on the panel. You can turn this pedal function
on or off for each keyboard part on this display.
PEDAL CONTROL
(WAH)
Applies the wah effect to notes played on the keyboard when the [DSP] button
is turned on. You can turn this pedal function on or off for each keyboard part
on this display.
HARMONY/
ARPEGGIO
Same as the [HARMONY/ARPEGGIO] button.
PEDAL (ARP. HOLD) While the pedal is pressed, Arpeggio playback continues even after you release
the keyboard, and then Arpeggio stops when the pedal is released. Make sure
that any one of the Arpeggio type is selected and the [HARMONY/ARPEG-
GIO] button is turned on.
VOCAL HARMONY
(PSR-S975)
Same as the [3 ]/[4 ] (HARMONY) buttons in the MIC/GUITAR
SETTING display.
VOCAL EFFECT
(PSR-S975)
Same as the [5 ] (VOCAL EFFECT) buttons in the MIC/GUITAR SET-
TING display.
TALK Same as the [F] (TALK) button in the MIC/GUITAR SETTING display.
SCORE PAGE +/- While the Song is stopped, you can turn to the next/previous score page (one
page at a time).
LYRICS PAGE +/- While the Song is stopped, you can turn to the next/previous lyrics page (one
page at a time).
TEXT PAGE +/- You can turn to the next/previous text page (one page at a time).
SONG PLAY/PAUSE Same as the SONG [F/ K] (PLAY/PAUSE) button.
STYLE START/STOP Same as the STYLE CONTROL [START/STOP] button.
TAP TEMPO Same as the [TAP TEMPO] button.
SYNCHRO START Same as the [SYNC START] button.
SYNCHRO STOP Same as the [SYNC STOP] button.
INTRO 1–3 Same as the INTRO [I]–[III] buttons.
MAIN A–D Same as the MAIN VARIATION [A]–[D] buttons.
FILL DOWN Plays a fill-in, which is automatically followed by the previous Main section
(that of the button on the immediate left).
PSR-S975/S775 Reference Manual 119
10
Connections
FILL SELF Plays a fill-in.
FILL BREAK Plays a break.
FILL UP Plays a fill-in, followed by the next Main section (that of the button on the
immediate right).
ENDING1–3 Same as the ENDING/rit. [I]–[III] buttons.
HALF BAR FILL While the pedal is pressed, the “Half bar fill-in” function is turned on and
changing sections of a Style at the first beat of the current section starts the
next section from the middle with automatic fill-in.
FADE IN/OUT Same as the [FADE IN/OUT] button.
FING/ON BASS The pedal alternately switches between the FINGERED and FINGERED ON
BASS modes (page 25).
BASS HOLD While the pedal is pressed, the Accompaniment Style bass note will be held
even if the chord is changed during Style playback. If the fingering is set to “AI
FULL KEYBOARD,” the function does not work.
PERCUSSION The pedal plays a percussion instrument selected by the [4 ]–[8 ] but-
tons. You can use the keyboard to select the desired percussion instrument.
NOTE When you select the percussion instrument by pressing a key on the keyboard, the velocity with which you
press the key determines the percussion volume.
RIGHT 1 ON/OFF Same as the PART ON/OFF [RIGHT 1] button.
RIGHT 2 ON/OFF Same as the PART ON/OFF [RIGHT 2] button.
LEFT ON/OFF Same as the PART ON/OFF [LEFT] button.
OTS +/- Calls up the next/previous One Touch Setting.
120 PSR-S975/S775 Reference Manual
10
Connections
In this section, you can make MIDI-related settings for the instrument. The PSR-S975/S775 gives you a set
of ten pre-programmed templates that let you instantly and easily reconfigure the instrument to match your
particular MIDI application or external device. Also, you can edit the pre-programmed templates and save up
to ten of your original templates to USER memory.
NOTE You can save all your original templates as a single file to internal memory (USER drive) or a USB flash drive: [FUNCTION] TAB [F] MENU 2 [G]
SYSTEM TAB [E][F] SETUP FILES [G] MIDI SETUP FILES. See page 133.
1 Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [I] MIDI
2 Select a pre-programmed template from the PRESET page (page 121).
If you have already created your original template and saved it to the USER page, you can also select that
template from the USER page.
3 To edit the template, press the [8 ] (EDIT) button to call up the MIDI display.
4 Use the TAB [E][F] buttons to call up the relevant page, then set various parameters
to edit the current MIDI template.
• SYSTEM ..................... MIDI System Settings (page 122)
• TRANSMIT................. MIDI Transmit Settings (page 123)
• RECEIVE.................... MIDI Receive Settings (page 124)
• BASS .......................... Bass Note Settings for Style Playback via MIDI Receive (page 125)
• CHORD DETECT ...... Chord Type Settings for Style Playback via MIDI Receive (page 125)
5 When you’ve finished editing, press the [EXIT] button to return to the MIDI template
Selection display.
6 Select the USER tab by pressing the TAB [F] button, then press the [6 ] (SAVE)
button to save the edited template.
MIDI Settings
36
2
PSR-S975/S775 Reference Manual 121
10
Connections
Pre-programmed MIDI Templates
All Parts Transmits all parts including the keyboard parts (RIGHT 1, 2, and LEFT), with
the exception of Song parts.
KBD & STYLE Basically the same as “All Parts” with the exception of how keyboard parts are
managed. The right-hand parts are handled together as “UPPER” instead of
RIGHT 1 and 2, and the left-hand part is handled as “LOWER.
Master KBD In this setting, the instrument functions as a “master” keyboard, playing and
controlling one or more connected tone generators or other devices (such as a
computer/sequencer).
Song All transmit channels are set to correspond to Song channels 1–16. This is used
to play Song data with an external tone generator and to record Song data to an
external sequencer.
Clock Ext. Playback or recording (Song, Style, Multi Pad, etc.) synchronizes with an
external MIDI clock instead of the instrument’s internal clock. This template
should be used when you wish to set the tempo on the MIDI device connected
to the instrument.
MIDI Accord 1 MIDI accordions allow you to transmit MIDI data and play connected tone
generators from the keyboard and bass/chord buttons of the accordion. This
template lets you play melodies from the keyboard and control Style playback
on the instrument with the left-hand buttons.
MIDI Accord 2 Basically the same as “MIDI Accord1” above, with the exception that the
chord/bass notes you play with your left hand on the MIDI Accordion are rec-
ognized also as MIDI note events.
MIDI Pedal 1 MIDI pedal units allow you play connected tone generators with your feet
(especially convenient for playing single note bass parts). This template lets
you play/control the chord root in Style playback with a MIDI pedal unit.
MIDI Pedal 2 This template lets you play the bass part for Style playback by using a MIDI
pedal unit.
MIDI OFF No MIDI signals are sent or received.
122 PSR-S975/S775 Reference Manual
10
Connections
MIDI System Settings
The explanations here apply to the SYSTEM page in step 4 on page 120.
Use the [A]/[B] buttons to select the parameters (below), then set the ON/OFF status, etc. by using the
[1 ]–[8 ] buttons.
1 Local Control
Turns the Local Control for each part on or off. When Local Control is set to “ON,” the keyboard of the
instrument controls its own (local) internal tone generator, allowing the internal Voices to be played directly
from the keyboard. If you set Local to “OFF,” the keyboard and controllers are internally disconnected from
the instrument’s tone generator section so that no sound is output when you play the keyboard or use the
controllers. For example, this allows you to use an external MIDI sequencer to play the instrument’s internal
Voices, and use the instrument keyboard to record notes to the external sequencer and/or play an external
tone generator.
2 Clock setting, etc.
CLOCK
Determines whether the instrument is controlled by its own internal clock or a MIDI clock signal received
from an external device. INTERNAL is the normal Clock setting when the instrument is being used alone
or as a master keyboard to control external devices. If you are using the instrument with an external
sequencer, MIDI computer, or other MIDI device, and you want to synchronize it to that device, set this
parameter to the appropriate setting: MIDI, USB 1, or USB 2. In this case, make sure that the external
device is connected properly (e.g., to the instruments MIDI IN terminal), and that it is properly
transmitting a MIDI clock signal.
NOTE When CLOCK is set to a value other than INTERNAL, the tempo is indicated as “Ext.” on the Main display. This means that playback of this instrument is
controlled only from an external MIDI device or computer. In this condition, Styles, Songs, Multi Pads or the Metronome cannot be played back even if
you carry out the start operation.
NOTE When a USB wireless LAN adaptor is connected to the [USB TO DEVICE] terminal, the “WIRELESS LAN” parameter can also be selected.
TRANSMIT CLOCK
Turns MIDI clock (F8) transmission on or off. When set to OFF, no MIDI clock or Start/Stop data is
transmitted even if a Song or Style is played back.
RECEIVE TRANSPOSE
Determines whether or not the instrument’s transpose setting is applied to the note events received by the
instrument via MIDI.
START/STOP
Determines whether incoming FA (start) and FC (stop) messages affect Song or Style playback.
3 MESSAGE SW (Message Switch)
SYS/EX.
The “Tx” setting turns MIDI transmission of MIDI System Exclusive messages on or off. The “Rx” setting
turns MIDI reception and recognition of MIDI System Exclusive messages generated by external
equipment on or off.
PSR-S975/S775 Reference Manual 123
10
Connections
CHORD SYS/EX.
The “Tx” setting turns MIDI transmission of MIDI chord exclusive data (chord detect. root and type) on or
off. The “Rx” setting turns MIDI reception and recognition of MIDI chord exclusive data generated by
external equipment on or off.
MIDI Transmit Settings
The explanations here apply to the TRANSMIT page in step 4 on page 120. This determines which parts will
be sent as MIDI data and over which MIDI channel the data will be sent.
1 Use the [A]/[B] buttons or [1 ]/[2 ] buttons to select the part for changing
transmit settings.
The Parts listed on this display are the same as those shown in the MIXING CONSOLE display and
CHANNEL ON/OFF display with the exception of the two parts below.
UPPER: A keyboard part played on the right side of the keyboard from the Split Point for the Voices
(RIGHT 1 and/or 2).
LOWER: A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This
is not affected by the on/off status of the [ACMP] button.
2 Use the [3 ] buttons to select a channel via which the selected part will be
transmitted.
NOTE If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel—resulting in unex-
pected sounds and possible glitches in the connected MIDI device.
NOTE Protected Songs cannot be transmitted even if the proper Song channels 1–16 are set to be transmitted.
3 Use the [4 ]–[8 ] button to determine the types of data to be sent.
For information on the MIDI messages which can be set here, see “Note Events” on page 73.
1
1 2 3
The dots corresponding to each channel (1–16)
flash briefly whenever any data is transmitted on
the channel(s).
NOTE If “WLAN” is shown, this instrument can handle
MIDI messages received via the USB wireless LAN
adaptor connected to the [USB TO DEVICE] termi-
nal. When “WLAN” is not shown although the USB
wireless LAN adaptor is connected, turn the instru-
ment off then on again.
124 PSR-S975/S775 Reference Manual
10
Connections
MIDI Receive Settings
The explanations here apply to the RECEIVE page in step 4 on page 120. This determines which parts will
receive MIDI data and over which MIDI channels the data will be received.
1 Use the [A]/[B] buttons or [1 ]/[2 ] buttons to select the channel to be received.
The instrument can receive MIDI messages over 32 channels (16 channels x 2 ports) by USB connection.
2 Use the [3 ] buttons to select the part via which the selected channel will be
received.
The Parts listed on this display are the same as those shown in the MIXING CONSOLE display and
CHANNEL ON/OFF display with the exception of the following parts.
KEYBOARD: The received note messages control the instrument’s keyboard performance.
EXTRA PART 1–5: There are five parts specially reserved for receiving and playing MIDI data.
Normally, these parts are not used by the instrument itself. The instrument can be used as a 32-channel
multi-timbral tone generator by using these five parts in addition to the parts (except for the
microphone/guitar sound).
3 Use the [4 ]–[8 ] button to determine the types of data to be received.
For information on the MIDI messages which can be set here, see “Note Events” on page 73.
MIDI transmission/reception via the USB terminals and MIDI terminals
The relationship between the MIDI terminals and the USB terminals which can be used for transmitting/
receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
1
1 2 3
The dots corresponding to each channel (1–16)
flash briefly whenever any data is received on the
channel(s).
NOTE If “WLAN” is shown, this instrument can handle
MIDI messages received via the USB wireless LAN
adaptor connected to the [USB TO DEVICE] termi-
nal. When “WLAN” is not shown although the USB
wireless LAN adaptor is connected, turn the instru-
ment off then on again.
MIDI reception MIDI transmission
MIDI [IN] terminal [USB TO HOST] terminal MIDI [OUT] terminal [USB TO HOST] terminal
Port handling
USB2USB1
Merge
MIDI/USB1/WLAN
0116
USB2
0116
MIDI/USB/WLAN 01–16
Wireless
LAN
Wireless LAN
PSR-S975/S775 Reference Manual 125
10
Connections
Bass Note Settings for Style Playback via MIDI Receive
The explanations here apply to the BASS page in step 4 on page 120. These settings let you determine the
bass note for Style playback, based on the note messages received via MIDI. The note on/off messages
received at the channel(s) set to “ON” are recognized as the bass note of the chord of Style playback. The
bass note will be detected regardless of the [ACMP] or split point settings. When several channels are
simultaneously set to “ON,” the bass note is detected from merged MIDI data received over the channels.
1 Use the [A]/[B] buttons to select the channel.
2 Use the [1 ]–[8 ] button to set the desired channel to ON or OFF.
You can also set all channels to OFF by pressing the [F] (ALL OFF) button.
Chord Type Settings for Style Playback via MIDI Receive
The explanations here apply to the CHORD DETECT page in step 4 on page 120. This page lets you select
the MIDI channels over which the MIDI data from the external device will be used to detect the Chord Type
for Style playback. The note on/off messages received at the channel(s) set to “ON” are recognized as the
notes for detecting chords in Style playback. The chords to be detected depend on the fingering type. The
chord types will be detected regardless of the [ACMP] or split point settings. When several channels are
simultaneously set to “ON,” the chord type is detected from merged MIDI data received over the channels.
The operation procedure is basically the same as that of the BASS display above.
2
1
The dots corresponding to each channel (1–16)
flash briefly whenever any data is received on the
channel(s).
NOTE If “WLAN” is shown, this instrument can handle
MIDI messages received via the USB wireless LAN
adaptor connected to the [USB TO DEVICE] termi-
nal. When “WLAN” is not shown although the USB
wireless LAN adaptor is connected, turn the instru-
ment off then on again.
126 PSR-S975/S775 Reference Manual
10
Connections
By using a USB wireless LAN adaptor (sold separately), you can connect the PSR-S975/S775 with an
iPhone/iPad via a wireless network. For general operating instructions, refer to the “iPhone/iPad Connection
Manual” on the website. This section covers only operations that are specific to the PSR-S975/S775.
Before starting operations, make sure that the USB wireless LAN adaptor is connected to the [USB TO
DEVICE] terminal and call up the setup display via [FUNCTION]
TAB [F] MENU 2 [H] WIRELESS
LAN.
NOTE If the USB wireless LAN adaptor is not recognized by the instrument, “WIRELESS LAN” for the [H] button is not shown. When “WIRELESS LAN” is not
shown even though a USB wireless LAN adaptor has been connected, turn the instrument off then on again.
Infrastructure Mode
Connecting with an iPhone/iPad via Wireless LAN
[A]/[B] Selects the network.
[G] UPDATE Updates the network list on the display.
[I] DETAIL For setting the detailed parameters on the pages below. After making these
settings, press one of the [7 ]/[8 ] (SAVE) button to actually save
them.
IP ADDRESS: Sets the IP address and other related parameters.
OTHERS: When the instrument is connected to the network with the
Infrastructure Mode, the current time is shown on the Main display.
You can set the Time Zone via the [B] button and Daylight Saving
Time via the [C] button for your local time.
If you want to enter the host name, press the [A] button.
[1 ]/
[2 ]
WPS Connects this instrument to the network via WPS. Press this button fol-
lowed by the [G] (YES) button, then press the WPS button on your access
point within two minutes.
[3 ]/
[4 ]
MODE Switches to the Access Point Mode.
[5 ]/
[6 ]
INITIALIZE Initializes the connection setup to the default factory status.
[7 ]/
[8 ]
CONNECT Connects to the selected network.
If you select “Other” by using the [A]/[B] buttons, this calls up the Man-
ual Setup display in which you set the SSID, security method, and pass-
word. After entering those, press one of the [7 ]/[8 ] buttons in
the Manual Setup display to connect to the network.
PSR-S975/S775 Reference Manual 127
10
Connections
Access Point Mode
[I] DETAIL For setting the detailed parameters on the pages below. After making these
settings, press one of the [7 ]/[8 ] (SAVE) button to actually save
them.
WIRELESS NETWORK: For setting the SSID, security, password, and
channel.
IP ADDRESS: For setting the IP address and other related parameters.
OTHERS: For entering the Host name or showing MAC address, etc.
[3 ]/
[4 ]
MODE Switches to the Infrastructure Mode.
[5 ]/
[6 ]
INITIALIZE Initializes the connection setup to the default factory status.
11
11
128 PSR-S975/S775 Reference Manual
Other Functions
Other Functions
Contents
UTILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
• CONFIG 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
• CONFIG 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
• PARAMETER LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
• USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
• OWNER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
• BACKUP/RESTORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
• SETUP FILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
• RESET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
This section covers only the UTILITY and SYSTEM displays in the FUNCTION menu. For other displays,
refer to the “Function List” in the Owner’s Manual to see where you can find the instructions.
CONFIG 1
1 Fade In/Out
These parameters determine how Style or Song playback is faded in/out when using the [FADE IN/OUT]
button.
UTILITY
[3 ] FADE IN TIME Determines the time it takes for the volume to fade in, or go from mini-
mum to maximum (range of 0–20.0 seconds).
[4 ] FADE OUT
TIME
Determines the time it takes for the volume to fade out, or go from maxi-
mum to minimum (range of 0–20.0 seconds).
[5 ] FADE OUT
HOLD TIME
Determines the time the volume is held at 0 following the fade out (range
of 0–5.0 seconds).
Use the [A]/[B] buttons to
select the desired parameter.
PSR-S975/S775 Reference Manual 129
11
Other Functions
2 Metronome
3 Tap
This allows you to set the percussion sound and the velocity which sounds when the [TAP TEMPO] button
is tapped.
4 Auto Power Off
For details, refer to “Setting Up” in the Owner’s Manual.
CONFIG 2
1 Speaker / Display Content
[2 ] VOLUME Determines the volume of the metronome sound.
[3 ]–
[5 ]
SOUND Determines whether a bell accent is sounded or not at the first beat of each
measure.
[6 ]/
[7 ]
TIME SIGNA-
TURE
Determines the time signature of the metronome sound.
[2 ]–
[4 ]
PERCUSSION Selects the percussion sound.
[5 ]/
[6 ]
VELOCITY Sets the velocity.
(PSR-S975)
[3 ]/
[4 ]
(PSR-S775)
[4 ]/
[5 ]
SPEAKER Determines whether or not the sound is output from the speaker of this
instrument.
HEADPHONE SW: Speaker sounds normally, but is cut off when head-
phones are connected to the [PHONES] jack.
ON: Speaker sound is always on, even if headphones are connected.
OFF: Speaker sound is off. You can only hear the instrument sound via
the headphones or an external device connected to the AUX OUT
jacks.
[5 ]/
[6 ]
DISPLAY OUT
(PSR-S975)
Selects display contents for the external monitor. For details, refer to the
Owner’s Manual, chapter 10.
Use the [A]/[B] buttons to
select the desired parameter.
130 PSR-S975/S775 Reference Manual
11
Other Functions
2 Display-related settings / Voice Category Button Options
3 Arpeggio settings
[1 ] STYLE TEMPO Determines whether the default tempo of each preset Style is shown or
hidden above the Style name in the Style Selection display.
[2 ]VOICE
NUMBER
Determines whether the Voice bank and number are shown or hidden in
the Voice Selection display. Displaying these is helpful when you want to
check which bank select MSB/LSB values and program change number
you need to specify when selecting the Voice from an external MIDI
device.
NOTE The numbers displayed here start from “1.” Accordingly the actual MIDI program change numbers
are one lower, since that number system starts from “0.”
NOTE For the GS Voices, the program change numbers are not available even when this parameter is set to
ON.
[3 ] TIME STAMP Determines whether the updated date and time are shown or hidden on the
File Selection display.
When you connect the instrument to the network with the Infrastructure
Mode (page 126) by using the USB wireless adaptor (UD-WL01), the
instrument gets the “clock” information and the current timestamp (date
and time) is recorded to the files you save to the instrument. Once you turn
the power off, the clock is set to the factory default and will not be updated
unless the instrument is connected to the network.
[5 ]/
[6 ]
VOICE
CATEGORY
BUTTON
OPTIONS
Determines how the Voice Selection display is opened when one of the
VOICE buttons is pressed.
OPEN & SELECT: Opens the Voice Selection display with the previ-
ously selected Voice in the Voice category automatically selected
(when one of the VOICE buttons is pressed).
OPEN ONLY: Opens the Voice Selection display with the currently
selected Voice (when one of the VOICE buttons is pressed).
[7 ]/
[8 ]
POPUP
DISPLAY TIME
Determines the time in which the pop-up displays close. (Pop-up displays
are shown when you press buttons such as TEMPO, TRANSPOSE or
UPPER OCTAVE, etc.)
[3 ]/
[4 ]
QUANTIZE Determines the timing of the Arpeggio Quantize function. Arpeggio play-
back is synchronized with Song or Style playback, and any slight imper-
fections are corrected in this timing.
[5 ]/
[6 ]
HOLD ON/OFF Turns on or off the Arpeggio Hold function. When this is set to ON, turn-
ing the [HARMONY/ARPEGGIO] button on makes Arpeggio playback
continue even after the note has been released. To stop playback, press the
[HARMONY/ARPEGGIO] button again.
PSR-S975/S775 Reference Manual 131
11
Other Functions
PARAMETER LOCK
This lets you lock or maintain the settings of specific parameters (such as Effect and Split Point), even when
the panel setups are changed by Registration Memory, One Touch Setting, etc.
To set this function, use the [1 ]–[4 ] buttons to select the desired parameter then use the [5 ]/
[6 ] buttons to enter or remove the checkmarks. Repeat this step as desired. Items having checkmarks
will be locked.
USB
You can set or carry out important USB flash drive-related operations for the instrument. Before using a USB
flash drive, be sure to read “Connecting USB Devices” in the Owner’s Manual, chapter 10.
[A]/[B] DRIVE LIST Selects the desired drive to be formatted or to be checked for remaining
memory.
[F] PROPERTY Opens the Property display of the device selected above by the [A]/[B]
buttons. You can check the amount of remaining memory on the device.
NOTE The displayed remaining memory value is an approximate value.
[H] FORMAT Formats the drive selected above by the [A]/[B] buttons. For instructions,
refer to the Owner’s Manual, chapter 10.
[3 ]/
[4 ]
SONG AUTO
OPEN
Turns the Song Auto Open function on or off. When this is set to “ON,
simply connecting the USB flash drive (selected in the Device List above)
calls up the first Song in the USB flash drive.
132 PSR-S975/S775 Reference Manual
11
Other Functions
OWNER
BACKUP/RESTORE
Refer to “Basic Operations” in the Owner’s Manual.
SYSTEM
[D] EXPORT
INSTRUMENT
INFO
For exporting identification information of the instrument, which may be
necessary for using the “Yamaha Expansion Manager” software, to the
root directory of the USB flash drive (page 22).
[I] OWNER NAME Lets you enter your name as the owner. The Owner name is indicated on
the opening display when you turn the power on. For instructions on enter-
ing characters, refer to “Basic Operations” in the Owner’s Manual.
[J] MAIN PICTURE Lets you select a background picture for the Main display. You can select a
picture from among various pictures provided on the PRESET page. After
selecting, press the [EXIT] button to close the Selection display.
If you want to use an original picture, prepare the desired file (a bitmap
“.BMP” file no greater than 800 x 480 pixels) in the USB flash drive, copy
it from the USB flash drive to the USER page, then select it from the
USER page. Due to access speed limitations, it is not recommended to
select the desired file from the USB flash drive.
NOTE The explanation about picture compatibility above applies also to the background of the Song Lyric
display (page 52).
[4 ]/
[5 ]
LANGUAGE Determines the language used for the display messages. Once you change
this setting, all messages will be shown in the selected language.
[7 ]/
[8 ]
VERSION Displays the program version and the hardware ID of this instrument.
PSR-S975/S775 Reference Manual 133
11
Other Functions
SETUP FILES
For the items below, you can save your original settings to USER or USB drive as a single file for future recall.
1 Make all desired settings on the instrument.
2 Call up the operation display.
3 Use the [F]–[I] buttons to call up the relevant display for saving your data.
4 Use the TAB [E][F] buttons to select one of the tabs (USER or USB) to which your
settings will be saved.
5 Press the [6 ] (SAVE) button to save your file.
6 To recall your file, press the desired [F]–[I] button in the SETUP FILES display, then
select the desired file.
If you want to call up the factory default files, select the file in the PRESET tab.
When the file is selected, a message is displayed according to the content of the file. Press the desired
button.
[F] SYSTEM SETUP
FILES
Parameters set on the various displays such as the [FUNCTION] TAB
[E] MENU 1 [J] UTILITY and MIC/GUITAR SETTING display are
handled as a single System Setup file. Refer to the “Parameter Chart” in
the Data List on the website for details on which parameters belong to
System Setup.
[G] MIDI SETUP
FILES
The MIDI settings including the MIDI Setups on the USER tab display are
handled as a single file.
[H] USER EFFECT
FILES
The following data can be managed as a single file.
• User Effect types .....................................................................page 109
• User Master EQ types ............................................................page 112
• User Master Compressor types ...............................................page 114
• User Microphone/Guitar settings ..............................................page 91
User Vocal Harmony/Synth Vocoder types (PSR-S975 only)
.. pages 95, 100
[I] MUSIC FINDER
FILES
All the preset and created Records of the Music Finder are handled as a
single file.
134 PSR-S975/S775 Reference Manual
11
Other Functions
RESET
This function lets you restore the status of the instrument to the original factory settings.
1 Use the [1 ]–[3 ] buttons to select the desired item then use the [4 ]/
[5 ] buttons to enter or remove the checkmark.
When an item is checkmarked, the corresponding parameters will be reset as described below:
2 Press the [I] (FACTORY RESET EXECUTE) button to carry out the Factory Reset
operation for all checkmarked items.
SYSTEM SETUP Resets the System Setup parameters to the original factory settings. Refer to
the “Parameter Chart” in the Data List on the website for details about which
parameters belong to System Setup.
MIDI SETUP Resets the MIDI settings including the MIDI Setups on the USER tab display
to the original factory status.
USER EFFECT Resets the current Effect settings and the following data:
• User Effect types ............................................................................. page 109
• User Master EQ types .................................................................... page 112
• User Master Compressor types ....................................................... page 114
• User Microphone/Guitar settings ...................................................... page 91
User Vocal Harmony/Synth Vocoder types (PSR-S975 only)
.........pages 95, 100
MUSIC FINDER Resets the Music Finder data (all Records) to the original factory settings.
FILES & FOLDERS Deletes all files and folders including the Expansion folder stored in the USER
tab display.
REGIST Turns off all the Registration Memory [1]–[8] lamps, indicating that no Regis-
tration Memory Bank is selected although all the Registration Memory Bank
files are maintained. In this status, you can create Registration Memory setups
from the current panel settings.
NOTE The same operation can be done by turning the power on while holding the B5 key (rightmost B key). In this
case, you can create Registration Memory setups from the default panel settings.
2
PSR-S975/S775 Reference Manual 135
Index
Index
A
Access Point Mode ......................... 127
Any Key ............................................ 56
Arpeggio ............................................. 7
Arpeggio Hold ..........................118, 130
Arpeggio Quantize .......................... 130
Arpeggio setting .............................. 130
B
Backup ............................................ 132
Block Diagram .................................115
C
Carrier (Synth Vocoder) .................. 102
Chord Fingering Type ....................... 25
Chorus ...................................... 18, 108
Compressor ...............................90, 113
D
Detune .............................................. 98
Display ............................................ 129
Drum Setup ...................................... 46
DSP .....................................18, 19, 108
Dynamics Control ............................. 28
E
Effect ...................................... 7, 18, 108
Effect (Mixer) .................................. 107
EG (Envelope Generator) ................. 18
EQ (Equalizer) ............... 18, 19, 90, 111
Expansion Pack ................................ 22
F
Fade In/Out ..................................... 128
Filter ........................................... 17, 105
Fine-tuning .......................................... 9
Follow Lights ..................................... 56
Foot Controller .................................116
Foot Pedal .......................................116
Footswitch ........................................116
Formant ............................................ 99
Format ............................................ 131
Freeze ............................................... 86
G
GM ......................................................5
Guide (Song) ....................................55
H
Half Bar Fill-in ................................. 119
Harmony .............................................7
I
Infrastructure Mode .........................126
Instrument Info ..................................23
K
Karao-Key .........................................56
Knob ................................................. 11
L
Language ..................................55, 132
Live Control ....................................... 11
Lyrics .................................................52
M
Master Compressor ........................ 113
Master EQ ....................................... 112
Metronome ......................................129
MIDI setting .....................................120
Modulation ........................................17
Mono .................................................16
Multi Pad Creator ..............................77
Music Finder .....................................81
N
Noise Gate ........................................91
NTR (Note Transposition Rule) .........43
NTT (Note Transposition Table) ........43
O
One Touch Setting (OTS) ..................29
Organ Flutes Voice ............................20
OTS Link Timing ...............................27
P
Pan (Vocal Harmony) ........................99
Panpot (Mixer) .................................104
Parameter Lock .............................. 131
Part EQ ........................................... 111
Pedal ...............................................116
Performance Assistant Technology
(P.A.T.) .......................................... 57
Pitch ............................................9, 106
Pitch Correct (Vocal Harmony) ......... 99
Poly .................................................. 16
Portamento ....................................... 16
Punch In/Out (Song Creator) ............ 66
R
Realtime Recording (Multi Pad) ........ 77
Realtime Recording (Style) .............. 32
Registration Memory ........................ 85
Registration Sequence ..................... 87
Repeat (Song) .................................. 54
Reset (System) ............................... 134
Restore ........................................... 132
Reverb .......................................18, 108
RTR (Retrigger Rule) ........................ 45
S
Scale Tuning ....................................... 9
Score ................................................ 49
Setup data (Song) ............................ 65
Setup file ........................................ 133
Song Creator .................................... 58
Song setting ..................................... 54
Source Chord ................................... 42
Source Root ..................................... 42
Speaker .......................................... 129
Step Recording (Multi Pad) .............. 79
Step Recording (Song) ............... 59, 62
Step Recording (Style) ..................... 36
Stop Accompaniment ....................... 27
Style Assembly ................................. 36
Style Creator .................................... 30
Style File Format (SFF) .................... 41
Style Retrigger ................................. 13
Style setting ...................................... 27
Synth Vocoder type .........................100
136 PSR-S975/S775 Reference Manual
Index
T
Talk ................................................... 92
Tap Tempo .......................................129
Text ................................................... 52
Touch Response ................................ 6
Touch Sensitivity ...........................6, 16
Transpose ..................................10, 106
Transpose (Vocal Harmony) ........ 97, 98
Tuning ..........................................9, 106
U
USB flash drive ................................131
V
Vibrato ...............................................18
Vocal Harmony ................................. 93
Vocal Harmony type ......................... 95
Voice Set ...........................................15
Voice Set Filter ..................................19
Volume (Mixer) ................................104
Volume (Vocal Harmony) ................. 99
W
Wireless LAN ..................................126
X
XG ...................................................... 5
Y
Your Tempo ...................................... 56
Manual Development Group
© 2017 Yamaha Corporation
Published 12/2017 PO-A0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136

Yamaha PSR-S775 Manual de usuario

Categoría
Software
Tipo
Manual de usuario
Este manual también es adecuado para