Yamaha CVP-601 El manual del propietario

Marca: Yamaha

Modelo: CVP-601

Categoría: Instrumentos musicales

Tipo: El manual del propietario

CVP

601

Reference Manual

This Reference Manual explains advanced features of this instrument that are not explained in the Owner’s Manual.

Please read the Owner’s Manual ﬁrst, before reading this Reference Manual.

2 CVP-601 Reference Manual

Contents

1 Performing Piano Songs on the Clavinova 3

2 Voices

– Playing the Keyboard – 3

Voice Characteristics .........................................................3

Selecting GM&XG, MegaVoices and Other Voices

from the Panel....................................................................5

Selecting the Harmony/Echo type......................................6

Pitch-Related Settings .......................................................8

Editing Voices (Voice Set) ...............................................10

Editing Organ Flutes Parameters.....................................16

3Styles

– Playing Rhythm and Accompaniment – 17

Selecting the Chord Fingering Type ................................17

Style Playback Related Settings ......................................19

Split Point Settings...........................................................21

Calling up the Panel Settings to Match the Style

(Repertoire)......................................................................22

Memorizing an Original One Touch Setting .....................23

Confirming the One Touch Setting contents ....................23

Creating/Editing Styles (Style Creator) ............................24

4 Song Playback

– Playing and Practice Songs – 38

Editing Music Notation Settings .......................................38

Using the Auto Accompaniment Features with

Song Playback .................................................................40

Song Playback Related Parameters

(Repeat settings, Channel settings, Guide Function) ......41

5 Song Recording via MIDI

– Recording Your Performance via MIDI – 45

Creating/Editing Songs (Song Creator) ...........................45

6 USB Audio

– Playback and Recording Audio Files – 60

7 Music Finder

– Calling Up Ideal Setups (Voice, Style, etc.)

for Each Song – 60

Registering a Song, Audio or Style File

(SONG/AUDIO/STYLE) ...................................................60

Creating a Set of Favorite Records..................................62

Editing Records................................................................63

Saving the Record as a Single File..................................64

8 Registration Memory

– Saving and Recalling Custom Panel Setups –65

Deleting or renaming the Registration .............................65

Confirming the Registration Memory Information ............66

Disabling Recall of Specific Items (Freeze) .....................67

Calling Up Registration Memory Numbers in Order

(Registration Sequence) ..................................................68

9 Mixing Console

– Editing the Volume and Tonal Balance – 71

Editing VOL/VOICE Parameters ......................................71

Editing FILTER Parameters .............................................73

Editing TUNE Parameters................................................73

Editing EFFECT Parameters ...........................................74

Editing EQ Parameters ....................................................76

10 Connections

– Using Your Instrument with Other Devices – 78

Footswitch/Foot Controller Settings .................................78

MIDI Settings ...................................................................82

11 Utility

– Making Global Settings – 88

CONFIG1 .........................................................................88

CONFIG2 .........................................................................90

MEDIA..............................................................................92

OWNER ...........................................................................93

SYSTEM RESET .............................................................94

12 Index 96

* Each chapter in this Reference Manual corresponds to the relevant chapters in the Owner’s Manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat dif-

ferent from those on your instrument.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Using the PDF manual

• To quickly jump to items and topics of interest, click on the desired items in the “Bookmarks” index to the left

of the main display window. (Click the “Bookmarks” tab to open the index if it is not displayed.)

• Click the page numbers that appear in this manual to go directly to the corresponding page.

• Select “Find” or “Search” from the Adobe Reader “Edit” menu and enter a keyword to locate related informa-

tion anywhere in the document.

NOTE The names and positions of menu items may vary according to the version of Adobe Reader being used.

CVP-601 Reference Manual 3

Performing Piano Songs on

the Clavinova

These operations are fully explained in the Owner’s Manual. Refer to the corresponding chapter in

the Owner’s Manual.

Voices

– Playing the Keyboard –

Contents

Voice Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Selecting GM&XG, MegaVoices and Other Voices from the Panel . . . . . . . . . . . . . . . . . . . . . . . 5

Selecting the Harmony/Echo type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Pitch-Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

• Fine-tuning the Pitch of the Entire Instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

• Scale Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

• Changing the Part Assignment of the TRANSPOSE Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Editing Voices (Voice Set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

• Editable Parameters in the VOICE SET Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

• Disabling Automatic Selection of Voice Sets (Effects, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Editing Organ Flutes Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

The Voice type and its defining characteristics are indicated above the Voice name in the Voice Selection display.

Voice Characteristics

S.Articulation! See the Owner’s Manual, chapter 2.

Natural! These rich and luscious Voices are comprised mostly of keyboard instrument sounds

and are especially intended for playing piano and other keyboard parts. They also take

full advantage of Yamaha’s advanced sampling technology such as Stereo Sampling,

Sustain Sampling, and Key-off Sampling.

Live! These acoustic instrument sounds were sampled in stereo, to produce a truly authentic,

rich sound — full of atmosphere and ambience.

Cool! These Voices capture the dynamic textures and subtle nuances of electric instruments

— thanks to a huge amount of memory and some very sophisticated programming.

Sweet! These acoustic instrument sounds also benefit from Yamaha’s sophisticated technology

— and feature a finely detailed and natural sound.

Voices – Playing the Keyboard –

4 CVP-601 Reference Manual

Voices – Playing the Keyboard –

NOTE MegaVoices are not compatible with other models even though the model may have those types of Voices installed. Any Song or Style data you’ve created

on the instrument using these Voices will not sound properly when played back on other instruments.

NOTE MegaVoices sound differently depending on the keyboard range, velocity, touch, etc. Hence, if you apply a HARMONY/ ECHO effect, change the trans-

pose setting or change the Voice Set parameters, unexpected or undesired sounds may result.

Drums Various drum and percussion sounds are assigned to individual keys, letting you play

the sounds from the keyboard.

SFX Various special effect sounds are assigned to individual keys, letting you play the

sounds from the keyboard.

Organ Flutes! This authentic organ Voice lets you use the Voice Set to adjust the various footages and

craft your own original organ sounds. See page 16 for details.

MegaVoice These Voices make special use of velocity switching. Normal voices use velocity

switching, too — to change the sound quality and/or level of a voice according to how

strongly or softly you play it. This makes the voice sound authentic and natural. With

MegaVoices, however, each velocity range (the measure of your playing strength) has a

completely different sound. For example, a guitar MegaVoice includes the sounds of

various performance techniques. In conventional instruments, different Voices having

those sounds would be called up via MIDI and played in combination to achieve the

desired effect. However, now with MegaVoices, a convincing guitar part can be played

with just a single Voice, using specific velocity values to play the desired sounds.

Because of the complex nature of these Voices and the precise velocities need to play

the sounds, they’re not intended for playing from the keyboard. They are, however, very

useful and convenient when creating MIDI data — especially when you want to avoid

using several different Voices just for a single instrument part.

Actual sound maps for the MegaVoices are given in the separate Data List booklet that

comes with your instrument.

MEGAEnhancer

– Converting MIDI Songs to Songs for MegaVoice playing –

MEGAEnhancer allows conversion of conventional XG/GM song data to song data optimized for use

with the MegaVoice feature on a compatible instrument or tone generator. MEGAEnhancer makes MIDI

guitar and bass tracks come to life, with enhanced realism and expression. MEGAEnhancer can be

downloaded from the Internet.

Yamaha Downloads

http://download.yamaha.com/

CVP-601 Reference Manual 5

Voices – Playing the Keyboard –

The GM&XG Voices and MegaVoice cannot be directly called up from the VOICE category selection buttons.

However, they can be called up via panel operation by following the procedure below.

1 In the Main display, select the keyboard part to which the desired Voice is to be

assigned.

2 Press one of the VOICE category selection buttons to call up the Voice Selection

display.

3 Press the [8] (UP) button to call up the Voice categories.

4 Press the [2] (P2) button to display Page 2.

5 Press the desired [A] – [J] button to call up the Voice Selection display of GM&XG

Voices, GM2 Voices, etc.

MegaVoices are in the “Guitar” folder in the “StyleVoices” category.

6 Select the desired Voice.

Selecting GM&XG, MegaVoices and Other Voices from the Panel

6 CVP-601 Reference Manual

Voices – Playing the Keyboard –

This function lets you apply harmonies to your right hand performance according to the chords you play with

your left hand, and trigger automatic echo or tremolo even by pressing a single note or two notes.

1 Press the [VOICE EFFECT] button.

2 Turn the Harmony/Echo on by pressing the [I] (HARMONY/ECHO) button.

3 Call up the operation display by pressing the [J] (TYPE SELECT) button.

4 Use the [1] – [3] buttons to select the Harmony/Echo type.

The Harmony/Echo types are divided into the following groups, depending on the particular effect applied.

 Harmony Types

When one of the Harmony Types is selected, the Harmony effect is applied to the note played in the right-

hand section of the keyboard according to the type selected above and the chord specified in the chord

section of the keyboard shown below.

Selecting the Harmony/Echo type

Harmony Types

These types apply the harmony effect to notes played in the right-hand section of

the keyboard according to the chord specified in the left-hand section of the key-

board. (Note that the “1+5” and “Octave” settings are not affected by the chord.)

Multi Assign Type

This type applies a special effect to chords played in the right-hand section of the

keyboard.

Echo Types

These types apply echo effects to notes played in the right-hand section of the

keyboard in time with the currently set tempo.

Split Point

(for the Voice)

LEFT Voice and chord section

for Harmony effect

RIGHT 1 and 2 Voices

Chord section for Style playback

and Harmony effect

Chord section for

Style playback and

Harmony effect

Split Point

(for Style playback)

Split Point

LEFT Voice

RIGHT 1 and 2

Voices

CVP-601 Reference Manual 7

Voices – Playing the Keyboard –

 Multi Assign Type

The Multi Assign effect automatically assigns notes played simultaneously on the right-hand section of

the keyboard to separate parts (Voices). Both keyboard parts [RIGHT 1] and [RIGHT 2] should be turned

on when using the Multi Assign effect. The Right 1 and Right 2 Voices are alternately assigned to the

notes in the order you play.

 Echo Types

When one of the Echo Types is selected, the corresponding effect (echo, tremolo, trill) is applied to the

note played in the right-hand section of the keyboard in time with the currently set tempo, regardless of the

[ACMP ON/OFF] and the LEFT part on/off status. Keep in mind that Trill works when you hold down two

notes on the keyboard simultaneously (last two notes if more than two notes are held), and it plays those

notes alternately.

5 Use the [4] – [8] buttons to select various Harmony/Echo settings.

The available settings differ depending on the Harmony/Echo type.

[4] VOLUME This parameter is available for all types with the exception of “Multi

Assign.” It determines the level of the harmony/echo notes generated by

the Harmony/Echo effect.

[5] SPEED This parameter is only available when Echo, Tremolo, or Trill is selected

in Type above. It determines the speed of the Echo, Tremolo, and Trill

effects.

[6] ASSIGN This parameter is available for all types with the exception of “Multi

Assign.” This lets you determine the keyboard part via which the har-

mony/echo notes will be sounded.

[7] CHORD NOTE

ONLY

This parameter is available when one of the Harmony Types is selected.

When this is set to “ON,” the Harmony effect is applied only to the note

(played in the right-hand section of the keyboard) that belongs to a chord

played in the chord section of the keyboard.

[8] TOUCH LIMIT This parameter is available for all types with the exception of “Multi

Assign.” It determines the lowest velocity value at which the harmony

note will sound. This allows you to selectively apply the harmony by your

playing strength, letting you create harmony accents in the melody. The

harmony effect is applied when you play the key strongly (above the set

value).

8 CVP-601 Reference Manual

Voices – Playing the Keyboard –

Fine-tuning the Pitch of the Entire Instrument

You can fine-tune the pitch of the entire instrument — a useful feature when playing the Clavinova along with

other instruments or CD music. Please note that the Tuning function does not affect the Drum Kit or SFX Kit

Voices with name “*** kit” and audio files.

1 Call up the operation display.

[FUNCTION]  [A] MASTER TUNE/SCALE TUNE  TAB [ ][ ] MASTER TUNE

2 Use the [4]/[5] buttons to set the tuning in 0.2 Hz steps, from 414.8–466.8 Hz.

Press the both 4 or 5’s [



] and [



] buttons simultaneously to reset the value to the factory setting of 440.0 Hz.

Scale Tuning

You can select various scales for playing in custom tunings for specific historical periods or music genres.

1 Call up the operation display.

[FUNCTION]  [A] MASTER TUNE/SCALE TUNE  TAB [ ][ ] SCALE TUNE

2 Use the [A]/[B] buttons to select the desired scale.

 Preset Scale types

Pitch-Related Settings

EQUAL The pitch range of each octave is divided equally into twelve parts, with each

half-step evenly spaced in pitch. This is the most commonly used tuning in

music today.

PURE MAJOR, PURE

MINOR

These tunings preserve the pure mathematical intervals of each scale, especially

for triad chords (root, third, fifth). You can hear this best in actual vocal harmo-

nies — such as choirs and a cappella singing.

PYTHAGOREAN This scale was devised by the famous Greek philosopher and is created from a

series of perfect fifths, which are collapsed into a single octave. The 3rd in this

tuning are slightly unstable, but the 4th and 5th are beautiful and suitable for

some leads.

MEAN-TONE This scale was created as an improvement on the Pythagorean scale, by making

the major third interval more “in tune.” It was especially popular from the 16th

century to the 18th century. Handel, among others, used this scale.

The tuning of each note for the cur-

rently selected scale is shown.

CVP-601 Reference Manual 9

Voices – Playing the Keyboard –

3 Change the following settings as necessary.

NOTE

To register the Scale Tune settings to the Registration Memory, be sure to checkmark the SCALE item in the REGISTRATION MEMORY CONTENTS display.

Changing the Part Assignment of the TRANSPOSE Buttons

You can determine to which part (keyboard, Song or both) the TRANSPOSE [-]/[+] buttons are applied. This

lets you transpose the pitch of the keyboard but not that of the Song (or vice versa) — allowing you to play

along with a Song in a more comfortable key, for example.

1 Call up the operation display.

[FUNCTION]  [D] CONTROLLER  TAB [ ][ ] KEYBOARD/PANEL

2 Use the [A]/[B] buttons to select “2. TRANSPOSE ASSIGN.”

3 Press the [4]/[5] buttons to select the desired transpose type.

You can confirm the setting here by viewing the pop-up window called up via the TRANSPOSE [-]/[+] buttons.

WERCKMEISTER,

KIRNBERGER

This composite scale combines the Werckmeister and Kirnberger systems,

which were themselves improvements on the mean-tone and Pythagorean

scales. The main feature of this scale is that each key has its own unique charac-

ter. The scale was used extensively during the time of Bach and Beethoven, and

even now it is often used when performing period music on the harpsichord.

ARABIC1, ARABIC2 Use these tunings when playing Arabic music.

[2] BASE NOTE Determines the base note for each scale. When the base note is changed,

the pitch of the keyboard is transposed, yet maintains the original pitch

relationship between the notes.

[3] –

[5]

TUNE Select the desired note to be tuned by using the [3] buttons and tune

it in cents by using the [4]/[5] buttons.

NOTE In musical terms a “cent” is 1/100th of a semitone. (100 cents equal one semitone.)

[6]/

[7]

PART SELECT Select the part to which the Scale Tune setting is applied by using the

[6]/[7] buttons. Then press the [8] button to add a check-

mark or press the [8] button to remove the checkmark.

[8] MARK ON/OFF

KEYBOARD When this is selected, the TRANSPOSE [-]/[+] buttons affect the pitch of key-

board played Voices and Style playback (controlled by the performance in the

chord section of the keyboard) — but they do not affect Song playback.

SONG When this is selected, the TRANSPOSE [-]/[+] buttons affect only the pitch of

Song playback.

MASTER When this is selected, the TRANSPOSE [-]/[+] buttons affect the overall pitch

of the instrument, except audio playback.

10 CVP-601 Reference Manual

Voices – Playing the Keyboard –

The instrument has a Voice Set feature that allows you to create your own Voices by editing some parameters

of the existing Voices. Once you’ve created a Voice, you can save it as a User Voice to the USER drive or

external devices for future recall.

1 Select the desired Voice (other than an Organ Flutes Voice).

Organ Flutes Voices have a different editing method than described here. For instructions on editing the

Organ Flutes Voices, see page 16.

2 Press the [6] (VOICE SET) button to call up the VOICE SET display.

3 Use the TAB [ ][ ] buttons to call up the relevant setting display.

For information on the available parameters in each display, see the “Editable Parameters in the VOICE

SET Displays” on page 11.

4 As necessary, use the [A]/[B] buttons to select the item (parameter) to be edited and

edit the Voice by using the [1] – [8] buttons.

By pressing the [D] (COMPARE) button, you can compare the sound of the edited Voice with the original

(unedited) Voice.

5 Press the [I] (SAVE) button to save your edited Voice as a User Voice.

NOTICE

The settings will be lost if you select another Voice or turn the power to the instrument off without executing the Save operation.

Editing Voices (Voice Set)

CVP-601 Reference Manual 11

Voices – Playing the Keyboard –

Editable Parameters in the VOICE SET Displays

The Voice Set parameters are organized into six different displays. The parameters in each display are

described separately, below.

NOTE The available parameters differ depending on the Voice.

 PIANO Page

This display is available only when the Natural! piano Voice (page 3) is selected.

 COMMON Page

[1]/

[2]

TUNING

CURVE

Determines the tuning curve. Select “FLAT” if you feel the tuning curve

of the piano Voice does not quite match that of other instruments Voices.

STRETCH: Tuning curve commonly used for solo piano performance.

FLAT: Tuning curve in which the frequency is octave doubled over the

entire keyboard range.

[3]/

[4]

KEY OFF

SAMPLE

Adjusts the volume of the key-off sound (the subtle sound that occurs

when you release a key).

[5]/

[6]

SUSTAIN

SAMPLE

Adjusts the depth of sustain sampling for the damper pedal.

[7]/

[8]

STRING

RESONANCE

Adjusts the depth of string resonance.

[1] VOLUME Adjusts the volume of the current edited Voice.

[2]/

[3]

TOUCH SENSE Adjusts the touch sensitivity (velocity sensitivity), or how greatly the

volume responds to your playing strength.

DEPTH

Determines the velocity sensitivity, or how much the level of the Voice

changes in response to your playing strength (velocity).

OFFSET

Determines the amount by which received velocities are adjusted for the

actual velocity effect.

64 127

127

64 127

127

Actual Velocity for

tone generator

Depth = 127 (twice)

Depth = 64 (normal)

Depth = 32 (half)

Depth = 0

TOUCH SENSE DEPTH

Changes to velocity curve according to

VelDepth (with Offset set to 64)

Received Velocity

(Actual KeyOn speed)

TOUCH SENSE OFFSET

Changes to velocity curve according to

VelOffset (with Depth set to 64)

Actual Velocity for tone

generator

Received Velocity

(Actual KeyOn speed)

Offset = 96 (+64)

Offset = 127 (+127)

Offset = 64 (normal)

Offset = 32 (-64)

Offset = 0 (-127)

Depends

on offset

Depends

on offset

12 CVP-601 Reference Manual

Voices – Playing the Keyboard –

 CONTROLLER Page

1 CENTER PEDAL

2 LEFT PEDAL

These allow you to select the function to be assigned to the center or left pedal.

3 MODULATION

When a pedal function is assigned to MODULATION, the pedal can be used to modulate the parameters

below as well as the pitch (vibrato). Here, you can set the degree to which the pedal modulates each of the

following parameters.

[4]/

[5]

PART OCTAVE Shifts the octave range of the edited Voice up or down in octaves. When

the edited Voice is used as any of the RIGHT 1–2 parts, the R1/R2

parameter is available; when the edited Voice is used as the LEFT part,

the LEFT parameter is available.

[6] MONO/POLY Determines whether the edited Voice is played monophonically or poly-

phonically.

[7] PORTAMENTO

TIME

Sets the portamento time (pitch transition time) when the edited Voice is

set to “MONO” above.

NOTE The Portamento Time determines the pitch transition time. Portamento is a function that creates a

smooth transition in pitch from the first note played on the keyboard to the next.

[1] FUNCTION Selects the function to be assigned to the center or left pedal. For details

on the pedal functions, see page 78.

[2] –

[8]

RIGHT 1,

RIGHT 2, LEFT,

etc.

Determines whether the assigned function is effective or not for the

respective keyboard part. This also determines the depth for the

function. For details, see page 78.

[2] FILTER Determines the degree to which the pedal modulates the Filter Cutoff

Frequency. For details about the filter, see page 13.

[3] AMPLITUDE Determines the degree to which the pedal modulates the amplitude (vol-

ume).

[5] LFO PMOD Determines the degree to which the pedal modulates the pitch, or the

vibrato effect.

[6] LFO FMOD Determines the degree to which the pedal modulates the Filter modula-

tion, or the wah effect.

[7] LFO AMOD Determines the degree to which the pedal modulates the amplitude, or

the tremolo effect.

CVP-601 Reference Manual 13

Voices – Playing the Keyboard –

 SOUND Page

FILTER

Filter is a processor that changes the timbre or tone of a sound by either blocking or passing a specific

frequency range. The parameters below determine the overall timbre of the sound by boosting or cutting a

certain frequency range. In addition to making the sound either brighter or mellower, Filter can be used to

produce electronic, synthesizer-like effects.

The EG (Envelope Generator) settings determine how the level of the

sound changes in time. This lets you reproduce many sound

characteristics of natural acoustic instruments — such as the quick

attack and decay of percussion sounds, or the long release of a

sustained piano tone.

VIBRATO

Vibrato is a quavering, vibrating sound effect that is produced by

regularly modulating the pitch of the Voice.

[1] BRIGHT

(Brightness)

Determines the cutoff frequency or

effective frequency range of the fil-

ter (see diagram). Higher values

result in a brighter sound.

[2]HARMO.

(Harmonic

content)

Determines the emphasis given to

the cutoff frequency (resonance),

set in BRIGHT. above (see dia-

gram). Higher values result in a

more pronounced effect.

[3] ATTACK Determines how quickly the sound reaches its maximum level after the

key is played. The lower the value, the quicker the attack.

[4] DECAY Determines how quickly the sound reaches its sustain level (a slightly

lower level than maximum). The lower the value, the quicker the decay.

[5] RELES.

(Release)

Determines how quickly the sound decays to silence after the key is

released. The lower the value, the quicker the decay.

[6] DEPTH Determines the intensity of the Vibrato effect. Higher settings result in a

more pronounced Vibrato.

[7] SPEED Determines the speed of the Vibrato effect.

[8] DELAY Determines the amount of time that elapses between the playing of a key

and the start of the Vibrato effect. Higher settings increase the delay of

the Vibrato onset.

Volume

These frequencies are

“passed” by the filter.

Cutoff

range

Frequency

(pitch)

Cutoff Frequency

Volume

Frequency (pitch)

Resonance

Time

Level

Key on Key off

Sustain

Level

ATTACK DECAY RELEASE

Pitch

DELAY

SPEED

DEPTH

Time

14 CVP-601 Reference Manual

Voices – Playing the Keyboard –

 EFFECT/EQ Page

1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/VIB ROTOR

2 DSP

3 EQ

Determines the Frequency and Gain of the Low and High EQ bands. For information about EQ, refer to

page 76.

 HARMONY Page

Harmony sets the Right 1 and 2 parts together. Select the Right 1 part in the Main display, before you set it.

This has the same settings as the display of “Selecting the Harmony/Echo type” page 6 in step 3.

[1]/

[2]

REVERB

DEPTH

Adjusts the reverb depth.

[3]/

[4]

CHORUS

DEPTH

Adjusts the chorus depth.

[5] DSP ON/OFF Determines whether the DSP is on or off.

[6] DSP DEPTH Adjusts the DSP depth.

If you want to re-select the DSP type, you can do so in the “2 DSP”

menu explained below.

[7] VIBE ROTOR This will be displayed only if VIBE VIBRATE is selected for the

DSP Type parameter explained below. Determines whether VIBE

VIBRATE should be set to on or off when selecting the Voice.

[1] –

[4]

DSP TYPE Selects the DSP effect category and type. Select a type after selecting

a category.

[5] –

[8]

VARIATION A Variation parameter is provided for each DSP type. Turning this on

or off (in ON/OFF below), lets you instantly and significantly change

the sound of the DSP effect. Here, you can edit the VARIATION on/

off status and variation’s parameter value setting.

[5] ON/OFF Determines whether the VARIATION is on or off. If you select

VARIATION ON here, a variation of the DSP effect is assigned to the

Voice. The variation parameter value can be adjusted in the VALUE

menu explained below. If you select VARIATION OFF, standard vari-

ation of DSP is assigned.

PARAMETER Displays the variation parameter. (This differs depending on the

effect type and cannot be changed.)

[6] –

[8]

VALUE Adjusts the value of the DSP variation parameter.

CVP-601 Reference Manual 15

Voices – Playing the Keyboard –

Disabling Automatic Selection of Voice Sets (Effects, etc.)

Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically

called up when a Voice is selected. However, you can also disable this feature by the operation in the relevant

display as explained below.

For example, if you want to change the Voice yet keep the same Harmony effect, set the HARMONY/ECHO

parameter to OFF (in the display explained below).

1 Call up the operation display.

[FUNCTION]  [E] REGIST SEQUENCE/FREEZE/VOICE SET  TAB [ ][ ] VOICE SET

2 Use the [A]/[B] buttons to select a keyboard part.

3 Use the [4] – [8] buttons to enable/disable automatic calling up of the settings

(ON or OFF) independently for each parameter group.

16 CVP-601 Reference Manual

Voices – Playing the Keyboard –

The Organ Flute Voices selected from the [ORGAN FLUTES] button can be edited by adjusting the footage

levers, adding the attack sound, applying effects and equalizer, etc.

NOTICE

After editing, go to the Voice Selection display by pressing the [I] (PRESETS) button and save the setting. The settings will be lost if you

select another Voice or turn the power to the instrument off without executing the Save operation.

 FOOTAGE Page

Refer to the Owner’s Manual, chapter 2.

 VOLUME/ATTACK Page

 EFFECT/EQ Page

Same parameters as in the VOICE SET “EFFECT/EQ” Page explained on page 14.

Editing Organ Flutes Parameters

[1] VOL (Volume) Adjusts the overall volume of the Organ Flutes. The longer the graphic

bar, the greater the volume.

[2] RESP

(Response)

Affects both the attack and release (page 13) portion of the sound,

increasing or decreasing the response time of the initial swell and

release, based on the FOOTAGE controls. The higher the value, the

slower the swell and release.

[3] VIB. SPEED Determines the speed of the vibrato effect controlled by the VIBRATO

ON/OFF ([F]/[G] buttons) and VIBRATO DEPTH ([H] button).

[4] MODE The MODE control selects one of two modes: FIRST and EACH. In the

FIRST mode, attack (percussive sound) is applied only to the first notes

played and held simultaneously; while the first notes are held, any sub-

sequently played notes have no attack applied. In the EACH mode,

attack is applied equally to all notes.

[5] –

[7]

4', 2 2/3', 2' These determine the attack sound volume of the ORGAN FLUTE

Voice. The 4', 2-2/3' and 2' controls increase or reduce the volume of

attack sound at the corresponding footages. The longer the graphic bar,

the greater the attack sound volume.

[8] LENG (Length) Affects the attack portion of the sound producing a longer or shorter

decay immediately after the initial attack. The longer the graphic bar,

the longer the decay.

Same as the

FOOTAGE Page.

Styles – Playing Rhythm and Accompaniment –

CVP-601 Reference Manual 17

Styles

– Playing Rhythm and Accompaniment –

Contents

Selecting the Chord Fingering Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Style Playback Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Split Point Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Calling up the Panel Settings to Match the Style (Repertoire) . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Memorizing an Original One Touch Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Confirming the One Touch Setting contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Creating/Editing Styles (Style Creator). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

• Realtime Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

• Step Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

• Style Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

• Editing the Rhythmic Feel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

• Editing Data for Each Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

• Making Style File Format Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

There are seven different Fingering Types which let you specify the chord root and type for Style playback.

1 Call up the operation display.

[FUNCTION]  [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING  TAB [ ][ ] CHORD

FINGERING

2 Press the [1] – [3] buttons to select a fingering.

For information on each fingering type, see page 18.

Selecting the Chord Fingering Type

Chord Tutor

If you know the name of a chord but don’t know how to play it, the Chord Tutor function conveniently

shows you which notes to play.

On the CHORD FINGERING display, specify the Chord Root and Chord Type by using the [6] –

[8] button. The notes you need to play are shown in the display.

NOTE Depending on the chord, some notes may be omitted.

18 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

Chord Fingering Types

NOTE “AI” stands for “Artificial Intelligence.”

SINGLE FINGER Makes it simple to produce orchestrated accompaniment using major, seventh,

minor and minor-seventh chords by pressing a minimum number of keys on the

Chord section of the keyboard. This type is available only for Style playback.

The abbreviated chord fingerings described below are used:

MULTI FINGER Automatically detects Single Finger or Fingered chord fingerings, so you can

use either type of fingering without having to switch fingering types.

FINGERED Lets you finger your own chords on the chord section of the keyboard, while

the instrument supplies appropriately orchestrated rhythm, bass, and chord

accompaniment in the selected Style. The Fingered type recognizes the various

chord types which are listed on the separate Data List booklet and can be

looked up using the Chord Tutor function on page 17.

FINGERED ON BASS Accepts the same fingerings as Fingered, but the lowest note played in the

Chord section of the keyboard is used as the bass note, allowing you to play

“on bass” chords. (In the Fingered mode, the root of the chord is always used

as the bass note.)

FULL KEYBOARD Detects chords in the entire key range. Chords are detected in a way similar to

Fingered, even if you split the notes between your left and right hands — for

example, playing a bass note with your left hand and a chord with your right, or

by playing a chord with your left hand and a melody note with your right.

AI FINGERED Basically the same as Fingered, with the exception that less than three notes

can be played to indicate the chords (based on the previously played chord,

etc.).

AI FULL KEYBOARD When this advanced fingering type is engaged, the instrument will automati-

cally create appropriate accompaniment while you play just about anything,

anywhere on the keyboard using both hands. You don’t have to worry about

specifying the Style chords. Although the AI Full Keyboard type is designed to

work with many songs, some arrangements may not be suitable for use with

this feature. This type is similar to Full Keyboard, with the exception that less

than three notes can be played to indicate the chords (based on the previously

played chord, etc.). 9th, 11th and 13th chords cannot be played. This type is

available only for Style playback.

For a major chord, press

the root key only.

For a minor chord, simulta-

neously press the root key

and a black key to its left.

For a seventh chord, simulta-

neously press the root key and

a white key to its left.

For a minor-seventh chord,

simultaneously press the root

key and both a white and

black key to its left.

CVP-601 Reference Manual 19

Styles – Playing Rhythm and Accompaniment –

The instrument has a variety of Style playback functions which can be accessed in the display below.

1 Call up the operation display.

[FUNCTION]  [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING  TAB [ ][ ] STYLE

SETTING

2 Use the [1] – [8] buttons for each setting.

Style Playback Related Settings

[1] STOP ACMP When [ACMP ON/OFF] is turned on and [SYNC START] is off, you can

play chords in the chord section of the keyboard with the Style stopped,

and still hear the accompaniment chord. In this condition — called “Stop

Accompaniment” — any valid chord fingerings are recognized and the

chord root/type are shown in the display. Here, you can determine

whether the chord played in the chord section will sound or not in the

Stop Accompaniment status.

OFF

The chord played in the chord section will not sound.

STYLE

The chord played in the chord section will sound via the Voices for the

Pad part and the Bass channel of the selected Style.

FIXED

The chord played in the chord section will sound via the specified Voice,

regardless of the selected Style.

NOTE When the selected Style contains MegaVoices, unexpected sounds may result when this is set to

“STYLE.”

NOTE When you record a song, the chord detected by playing the Stop Accompaniment can be recorded

regardless of the setting here. Please note that both the Voice that is sounded and the chord data

will be recorded when set to “STYLE,” and only the chord data will be recorded when set to “OFF”

or “FIXED.”

[2] OTS LINK

TIMING

This applies to the OTS Link function. This parameter determines the

timing in which the One Touch Settings change with the MAIN VARIA-

TION [A] – [D] change. (The [OTS LINK] button must be on.)

REAL TIME

One Touch Setting is immediately called up when you press a MAIN

VA R I AT I O N b u t t o n .

NEXT BAR

One Touch Setting is called up at the next measure, after you press a

MAIN VARIATION button.

20 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

[3] SYNCHRO

STOP

WINDOW

This determines how long you can hold a chord before the Synchro Stop

function is automatically cancelled. When the [SYNC STOP] button is

turned on and this is set to a value other than “OFF,” this is automatically

cancels the Synchro Stop function if you hold a chord for longer than the

time set here. This conveniently resets Style playback control to normal,

letting you release the keys and still have the Style play. In other words, if

you release the keys sooner than the time set here, the Synchro Stop func-

tion works.

[4] STYLE TOUCH Turns touch response for the Style playback on/off. When this is set to

“ON,” the Style volume changes in response to your playing strength in

the chord section of the keyboard.

[5]/

[6]

SECTION SET Determines the default section that is automatically called up when

selecting different Styles (when Style playback is stopped). When set to

“OFF” and Style playback is stopped, the active section is maintained

even if the different Style is selected. When any of the MAIN A – D sec-

tions is not included in the Style data, the nearest section is automatically

selected. For example, when MAIN D is not contained in the selected

Style, MAIN C will be called up.

[7] TEMPO This determines whether the tempo changes or not when you change

Styles. If you want to avoid changing the tempo when selecting another

Style, select LOCK or HOLD.

LOCK

The tempo setting of the previous Style is maintained.

HOLD

The tempo setting of the previous Style is maintained while Style is

played back and another Style is selected. While Style playback is

stopped and another Style is selected, the tempo changes to that of the ini-

tial default tempo for the selected Style.

RESET

The tempo changes to that of the initial default tempo for the selected

Style.

[8] PART ON/OFF This determines whether the on/off status of the Style Channels (Parts)

changes or not when you change Styles. If you want to avoid changing

the Style Channel On/Off status when selecting another Style, select

LOCK or HOLD.

LOCK

The Style Channel On/Off status of the previous Style is maintained.

HOLD

The Style Channel On/Off status of the previous Style is maintained

while Style is played back and another Style is selected. While Style

playback is stopped and another Style is selected, all Style Channels are

set to On.

RESET

All Style Channels are set to On.

CVP-601 Reference Manual 21

Styles – Playing Rhythm and Accompaniment –

These are the settings (two Split Points) that separate the different sections of the keyboard: the Chord

section, the LEFT part section and the RIGHT 1 and 2 section. The two Split Point settings (below) are

specified as note names.

1 Call up the operation display.

[FUNCTION]  [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING  TAB [ ][ ] SPLIT

POINT

2 Set the Split Point.

Split Point Settings

[F] Split Point (S+L) Sets the Split Point (S) and Split Point (L) to the same note. Press the [F]

button and rotate the [DATA ENTRY] dial.

[G] Split Point (S) Sets each Split Point. Press one of the desired buttons and rotate the

[DATA ENTRY] dial.

NOTE Split Point (L) cannot be set lower than Split Point (S).

[H] Split Point (L)

[1]/

[2]

STYLE You can specify each Split Point by note name. “STYLE” indicates Split

Point (S) and “LEFT” indicates Split Point (L).

[3]/

[4]

LEFT

Split Point (S)

Chord section

Voice RIGHT

1 – 2

Split Point (L)

Voice LEFT

Split Point (S+L)

Chord section

+ Voice LEFT

Voice RIGHT 1 and 2

22 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

The convenient Repertoire function automatically calls up the most appropriate panel settings (Voice number,

etc.) for the currently selected Style.

NOTE The settings shown here are Music Finder Records. You can choose additional settings by using the Music Finder feature.

1 Select the desired Style from the Style Selection display.

2 Press the [5] (REPERTOIRE) button.

Various appropriate panel settings matching the selected Style will be shown in the display.

3 Use the [2] – [3] buttons to select the desired panel setting.

NOTE Depending on the particular selected Style, there may not be any panel settings in the Repertoire function.

Calling up the Panel Settings to Match the Style (Repertoire)

Before using the Repertoire function, you need to import Music Finder records (see instructions described

in the Owner's Manual, chapter 7).

CVP-601 Reference Manual 23

Styles – Playing Rhythm and Accompaniment –

While the panel settings appropriate for each preset Style are pre-programmed as One Touch Settings, you

can also register your favorite settings to create original One Touch Settings. Because the One Touch Setting

data is included in a Style, the Save operation will be done as a Style on the Style Selection display.

1 Select the desired Style to correspond to your One Touch Setting.

2 Set up the panel controls (such as Voice, effects, and so on) as desired.

3 Press the [MEMORY] button in the REGISTRATION MEMORY section.

4 Press one of the ONE TOUCH SETTING [1] – [4] buttons.

A message appears in the display prompting you to save the panel settings.

5 Press [F] (YES) button to call up the Style Selection display and save the panel

settings as a Style file.

NOTICE

The panel settings memorized to each OTS button will be lost if you change the Style or turn the power off without executing the Save

operation.

You can check the information of the One Touch Setting [1] – [4] assigned to currently selected Style.

1 In the Style Selection display, press the [7] (OTS INFO.) button to call up the

Information display.

NOTE You can also call up the Information display by pressing the [DIRECT ACCESS] button then pressing one of the ONE TOUCH SETTING [1] – [4] buttons.

2 Press the [F] (CLOSE) button to close the Information display.

Memorizing an Original One Touch Setting

Confirming the One Touch Setting contents

24 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

Styles are made up of fifteen different sections (Intro, Main, Ending, etc.) and each section has eight separate

channels. With the Style Creator feature, you can create a Style by separately recording the channels, or by

importing pattern data from other existing Styles.

You can use one of the three different methods described below to create a Style. The created Style can also

be edited.

• Realtime Recording This method lets you record the Style by simply playing the keyboard. See

page 25.

• Step Recording This method lets you to enter each note individually. See page 28.

• Style Assembly This method lets you create a composite Style by combining various patterns

from the internal preset Styles or from Styles you have already created. See

page 28.

Call up the operation display.

[FUNCTION]  [F] DIGITAL REC MENU  [B] STYLE CREATOR

NOTE The Style files created on this instrument can only be played back on instruments which are compatible with SFF GE.

There are six Pages (tabs) in the Style Creator display.

•BASIC Creates the basic settings of the Style. You can also record your performance in real-

time to create a new Style (Realtime Recording). See page 25.

• ASSEMBLY Mixes the various parts (channels) from preset Styles or already created Styles to cre-

ate a new Style. See page 28.

•GROOVE

Changes the rhythmic feel of your created Style. See page 30.

• CHANNEL Edits data for each channel — quantizing, changing velocity, etc. See page 32.

• PARAMETER Changes the settings related for Style File Format. See page 33.

•EDIT Lets you enter notes one by one to create an original Style (Step Recording). See

page 28.

Creating/Editing Styles (Style Creator)

Sections

Channels

CVP-601 Reference Manual 25

Styles – Playing Rhythm and Accompaniment –

Realtime Recording

In the BASIC Page, you can create a single Style by recording the individual channels one-by-one, using

realtime recording.

1 When you want to create a Style based on an existing Style, select the desired Style to

serve as the basis for recording/editing before calling up the Style Creator display.

2 Call up the operation display.

[FUNCTION]  [F] DIGITAL REC MENU  [B] STYLE CREATOR

The BASIC Page is shown.

3 If you want to create a new Style from scratch, press the [C] (NEW STYLE) button to

delete all channel’s data.

4 Select the desired section (Intro, Main, Ending, etc.) for your new Style.

First close the RECORD display by pressing the [EXIT] button. Then use the [3]/[4] buttons to

select the section to be recorded.

NOTE To call up the RECORD display again, press the [F] (REC CH) button.

NOTE You can specify the sections to be recorded by using the Section buttons on the panel. Refer to step 3 on page 28.

NOTE You cannot select INTRO 4 and ENDING 4 sections directly via panel operations.

Realtime Recording Characteristics — Loop Recording and Overdub Recording

• Loop Recording

Style playback repeats the rhythm patterns of several measures in a “loop,” and Style recording is also

done using loops. For example, if you start recording with a two-measure MAIN section, the two

measures are repeatedly recorded. Notes that you record will play back from the next repetition (loop),

letting you record while hearing previously recorded material.

• Overdub Recording

This method records new material to a channel already containing recorded data, without deleting the

original data. In Style recording, the recorded data is not deleted, except when using functions such as

Rhythm Clear (page 27) and Delete (page 26).

For example, if you start recording with a two-measure MAIN section, the two measures are repeated

many times. Notes that you record will play back from the next repetition, letting you overdub new

material to the loop while hearing previously recorded material.

When creating a Style based on an existing internal Style, overdub recording is applied only to the

rhythm channels. For all other channels (except rhythm), you need to delete the original data before

recording.

-2

-1

26 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

5 Use the [5]/[6] buttons to determine the length (number of measures) of the

selected section, then press the [D] (EXECUTE) button to actually enter the specified

length.

6 Specify the channel to be recorded by simultaneously holding down the [F] (REC CH)

button and pressing the appropriate numbered button, [1] – [8].

To cancel the selection, press the corresponding [1] – [8] button again.

7 Call up the Voice Selection display by using the [1] – [8] buttons and select the

desired Voice for the corresponding recording channels.

Press the [EXIT] button to close the Voice Selection display.

8 If necessary, delete a channel by simultaneously holding down the [J] (DELETE)

button and pressing the appropriate numbered button, [1] – [8].

You can cancel the deletion by pressing the same numbered button again before releasing your finger from

the [J] button.

NOTE When recording channels BASS–PHR2 based on the existing Style, you have to delete the original data before recording.

Recordable Voices

• RHY1 channel

Any except your original Organ Flute and Super Articulation Voices are recordable.

• RHY2 channel

Only drum/SFX kits are recordable.

• BASS–PHR2 channels

Any except your original Organ Flute, drum/SFX kits and Super Articulation Voices are recordable.

NOTE Preset Organ Flute Voices can be recorded to the RHY1 and BASS–PHR2 channels.

CVP-601 Reference Manual 27

Styles – Playing Rhythm and Accompaniment –

9 Start recording by pressing the STYLE [START/STOP] button.

Playback of the specified section starts. Since the accompaniment pattern plays back repeatedly in a loop,

you can record individual sounds one by one, listening to the previous sounds as they play. For

information on recording to channels other than the rhythm channels (RHY1, 2), refer to the section

“Rules when recording non-rhythm channels” below.

NOTE You can turn off the desired channels by pressing the corresponding [1] – [8] buttons.

To continue recording with another channel, repeat steps 6 – 9.

Stop recording by pressing the STYLE [START/STOP] button.

Press the [EXIT] button to close the RECORD display.

Press the [I] (SAVE) button to execute the Save operation.

NOTICE

The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation.

Deleting recorded notes in the rhythm channel

When you are recording the rhythm channel (RHY1 or RHY2), you can delete a specific instrument

sound by simultaneously holding down the [E] (RHY CLEAR) button and pressing the appropriate key

on the keyboard.

Rules when recording non-rhythm channels

• Use only the CM7 scale tones when recording the BASS and PHRASE channels (i.e., C, D, E, G,

A, and B).

• Use only the chord tones when recording the CHORD and PAD channels (i.e., C, E, G, and B).

Using the data recorded here, the auto accompaniment (Style playback) is appropriately converted

depending on the chord changes you make during your performance. The chord which forms the basis for

this note conversion is called the Source Chord, and is set by default to CM7 (as in the example

illustration above).

You can change the Source Chord (its root and type) from the PARAMETER display on page 34. Keep in

mind that when you change the Source Chord from the default CM7 to another chord, the chord notes

and recommended notes will also change. For details on chord notes and recommended notes, see

page 34.

NOTE For the INTRO and ENDING sections, any desired chord or chord progression can be used.

CRC CRC

C = Chord note

C, R = Recommended note

28 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

Step Recording

In the EDIT Page, you can record notes with absolutely precise timing. This Step Recording procedure is

essentially the same as that for Song Recording (page 45) with the exception of the points listed below:

• In the Song Creator, the End Mark position can be changed freely; in the Style Creator, it cannot be changed.

This is because the length of the Style is automatically fixed, depending on the selected section. For exam-

ple, if you create a Style based on a section of four measures length, the End Mark position is automatically

set to the end of the fourth measure, and cannot be changed in the Step Recording display.

• Recording channels can be changed in the Song Creator 1-16 tab display; however, they cannot be changed

in the Style Creator. Select the recording channel in the BASIC tab display.

• In the Style Creator, the channel data can be entered and System Exclusive data can be edited (delete, copy,

or move). You can switch between the two by pressing the [F] button. However, Chord, Lyrics, and System

Exclusive data cannot be entered.

For instructions on Step Recording, refer to pages 45 – 48. For information on the EDIT display (Event List

display), refer to page 57.

Style Assembly

Style Assembly allows you to create a single Style by mixing the various patterns (channels) from existing

internal Styles.

1 Select the desired Style to serve as the basis for recording/editing before calling up

the Style Creator display.

2 Call up the operation display.

[FUNCTION]  [F] DIGITAL REC MENU  [B] STYLE CREATOR  TAB [ ][ ] ASSEMBLY

3 Select the desired section (Intro, Main, Ending, etc.) for your new Style.

First call up the SECTION Selection display by pressing one of the Section buttons (INTRO, MAIN,

ENDING, etc.) on the panel. Then change the section as desired by using the [6]/[7] buttons and

actually enter the selection by pressing the [8] (OK) button.

NOTE You cannot select INTRO 4 and ENDING 4 sections directly via panel operations.

CVP-601 Reference Manual 29

Styles – Playing Rhythm and Accompaniment –

4 Select the channel for which you wish to replace the pattern by using the [A] – [D] and

[F] – [I] buttons. Call up the Style Selection display by pressing the same button again.

Select the Style containing the pattern you want to replace in the Style Selection

display.

To return to the previous screen, press the [EXIT] button after selecting the Style.

5 Select the desired section of the newly imported Style (chosen in step 4) by using the

[2]/[3] (SECTION) buttons.

6 Select the desired channel for the section (chosen in step 5) by using the [4]/

[5] (CHANNEL) buttons.

Repeat steps 4 – 6 above to replace the patterns of other channels.

7 Press the [J] (SAVE) button to execute the Save operation.

NOTICE

The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation.

Playing the Style During Style Assembly

While you are assembling a Style, you can play back the Style (to check the sound of your edits) and

conveniently select the method of playback. Use the [6]/[7] (PLAY TYPE) buttons in the Style

Assembly display to select the playback method.

•SOLO

Mutes all but the selected channel in the ASSEMBLY Page. Any channels set to ON in the RECORD

display on the BASIC Page are played back simultaneously.

•ON

Plays back the selected channel in the ASSEMBLY Page. Any channels set to other than OFF in the

RECORD display on the BASIC Page are played back simultaneously.

•OFF

Mutes the selected channel in the ASSEMBLY Page.

[A] – [D],

[F] – [I]

buttons

30 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

Editing the Rhythmic Feel

1 In the GROOVE Page, use the [A]/[B] buttons to select the edit menu, then edit the

data by using the [1] – [8] buttons.

1 GROOVE

This lets you add swing to the music or change the “feel” of the beat by making subtle shifts in the timing

(clock) of the Style. The Groove settings are applied to all channels of the selected Style.

[1]/

[2]

ORIGINAL

BEAT

Specifies the beats to which Groove timing is to be applied. In other

words, if “8 Beat” is selected, Groove timing is applied to the 8th notes; if

“12 Beat” is selected, Groove timing is applied to 8th-note triplets.

[3]/

[4]

BEAT

CONVERTER

Actually changes the timing of the beats (specified in the ORIGINAL

BEAT parameter above) to the selected value. For example, when ORIG-

INAL BEAT is set to “8 Beat” and BEAT CONVERTER is set to “12,” all

8th notes in the section are shifted to 8th-note triplet timing. The “16A”

and “16B” Beat Converter which appear when ORIGINAL BEAT is set

to “12 Beat” are variations on a basic 16th-note setting.

[5]/

[6]

SWING Produces a “swing” feel by shifting the timing of the back beats, depend-

ing on the ORIGINAL BEAT parameter above. For example, if the speci-

fied ORIGINAL BEAT value is “8 Beat”, the Swing parameter will

selectively delay the 2nd, 4th, 6th, and 8th beats of each measure to create

a swing feel. The settings “A” through “E” produce different degrees of

swing, with “A” being the most subtle and “E” being the most pro-

nounced.

[7]/

[8]

FINE Selects a variety of Groove “templates” to be applied to the selected sec-

tion. The “PUSH” settings cause certain beats to be played early, while

“HEAVY” settings delay the timing of certain beats. The numbered set-

tings (2, 3, 4, 5) determine which beats are to be affected. All beats up to

the specified beat — but not including the first beat — will be played

early or delayed (for example, the 2nd and 3rd beats, if “3” is selected). In

all cases, “A” types produce minimum effect, “B” types produce medium

effect, and “C” types produce maximum effect.

CVP-601 Reference Manual 31

Styles – Playing Rhythm and Accompaniment –

2 DYNAMICS

This changes the velocity/volume (or accent) of certain notes in the Style playback. The Dynamics settings

are applied to each channel or all channels of the selected Style.

2 Press the [D] (EXECUTE) button to actually enter the edits for each display.

After the operation is completed, this button changes to “UNDO,” letting you restore the original data if

you are not satisfied with the Groove or Dynamics results. The Undo function only has one level; only the

previous operation can be undone.

3 Press the [I] (SAVE) button to execute the Save operation.

NOTICE

The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation.

[1]/

[2]

CHANNEL Selects the desired channel (part) to which Dynamics is to be applied.

[3]/

[4]

ACCENT TYPE Determines the type of accent applied — in other words, which notes in

the part(s) are emphasized with the Dynamics settings.

[6] STRENGTH Determines how strongly the selected Accent Type (above) will be

applied. The higher the value, the stronger the effect.

[7] EXPAND/

COMP.

Expands or compresses the range of velocity values. Values higher than

100% expand the dynamic range, while values lower than 100% com-

press it.

[8] BOOST/CUT Boosts or cuts all velocity values in the selected section/channel. Values

above 100% boost the overall velocity, while values below 100% reduce

it.

32 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

Editing Data for Each Channel

1 In the CHANNEL Page, use the [A]/[B] buttons to select the edit menu.

1 QUANTIZE

Same as in the Song Creator (page 55), with the exception of the two additional available parameters

below.

2 VELOCITY CHANGE

Boosts or cuts the velocity of all notes in the specified channel, according to the percentage specified here.

3 BAR COPY

This function allows data to be copied from one measure or group of measures to another location within

the specified channel.

4 BAR CLEAR

This function clears all data from the specified range of measures within the selected channel.

5 REMOVE EVENT

This function lets you remove specific events from the selected channel.

2 Use the [1]/[2] (CHANNEL) buttons to select the channel to be edited.

The selected channel is shown at the upper left of the display.

3 Use the [4] – [8] buttons to edit the data.

4 Press the [D] (EXECUTE) button to actually enter the edits for each display.

After the operation is completed, this button changes to “UNDO,” letting you restore the original data if

you are not satisfied with the results of the edit. The Undo function only has one level; only the previous

operation can be undone.

5 Press the [I] (SAVE) button to execute the Save operation.

NOTICE

The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation.

[4] TOP Specifies the first (TOP) and last (LAST) measures in the region to be

copied.

[5]LAST

[6] DEST Specifies the first measure of the destination location, to which the data is

to be copied.

Eighth notes with swing

Sixteenth notes with swing

CVP-601 Reference Manual 33

Styles – Playing Rhythm and Accompaniment –

Making Style File Format Settings

The Style File Format (SFF) combines all of Yamaha’s auto accompaniment (Style playback) know-how into

a single unified format. By using the Style Creator, you can take advantage of the power of the SFF format

and freely create your own Styles.

The chart shown below indicates the process by which the Style is played back. (This does not apply to the

rhythm track.) These parameters can be set via the Style Creator feature, in the PARAMETER Page.

Chord changes via the chord section of the keyboard.

Output

This instrument’s Styles are compatible with SFF GE — an enhanced format of the original SFF with

especially rich, expressive guitar parts.

NOTE The Style files created on this instrument can only be played back on instruments which are compatible with SFF GE.

Source Pattern settings — SOURCE (PLAY) ROOT/CHORD (page 34)

The Style data is appropriately converted depending on chord changes you make during your

performance. You can create the “Source Pattern” with the Style Creator, which determines how the

played chord will be converted. Here the “Source Chord” (page 34) can be set, allowing you to record

accompaniment channels.

Note Transposition settings — NTR and NTT (page 35)

This parameter group features two parameters that determine how the notes of the Source Pattern are to

be converted in response to chord changes.

Other settings — HIGH KEY, NOTE LIMIT and RTR (page 37)

Using the parameters of this group, you can fine-tune how Style playback responds to the chords you

play. For example, the Note Limit parameter allows you to have the Voices of the Style sound as realistic

as possible by shifting the pitch to an authentic range — ensuring that no notes sound outside the natural

range of the actual instrument (e.g., high bass sounds or low piccolo sounds).

34 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

1 In the PARAMETER Page, use the [A]/[B] buttons to select the edit menu.

For details of the edit menu, see page 34.

2 Use the [1]/[2] (CHANNEL) buttons to select the channel to be edited.

The selected channel is shown at the upper left of the display.

3 Use the [3] – [8] buttons to edit the data.

For details on editable parameters, see pages 34 – 37.

4 Press the [I] (SAVE) button to execute the Save operation.

NOTICE

The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation.

1 SOURCE (PLAY) ROOT/CHORD

These settings determine the original key of the source pattern (i.e., the key used when recording the

pattern). The default setting of CM7 (with a Source Root of “C” and a Chord Type of “M7”), is

automatically selected whenever the preset data is deleted prior to recording a new Style, regardless of the

Source Root and Chord included in the preset data. When you change Source Root/Chord from the default

CM7 to another chord, the chord notes and recommended notes will also change, depending on the newly

selected chord type.

NOTE When NTR is set to “Root Fixed,” NTT is set to “Bypass” and NTT BASS is set to “OFF,” the “Source Root” and “Source Chord” parameters are changed

to “Play Root” and “Play Chord,” respectively. In this case, you can change chords and hear the resulting sound for all channels.

NOTE SOURCE ROOT/CHORD is not applied when NTR is set to GUITAR.

CRC CR CRC C RC CRC C CR CRC C CR

CCC CR

CCC C CR CCC C RC

CRC

RCR

CR CR

CR CCR

CCR

RRCCC

CC RC

CR CC

CR C CR

CC RC C

CCR

CR R RC

CCR

CCC

CRC

CCC C

CRC CR

CRC CC

CCC

CCCR

RCC

CCC

RCC

CRC CRR

CRC

RCC

CCCR CC CCR CR

CMaj

(9)

Caug

7 7

♭

(9)

(11)

CmM

(9)

Cdim

(9)

(13)

(

♭

)

Csus

1+8

1+5

♭

Cm (9)

(

♯

)

(

♯

)

(

♯

)

C aug

CM aug

C sus

CM add9

(

♭

)

Csus

When the Source Root is C:

C = Chord notes

C, R = Recommended notes

CVP-601 Reference Manual 35

Styles – Playing Rhythm and Accompaniment –

2 NTR/NTT

NTR (Note Transposition Rule)

NTT (Note Transposition Table)

When NTR is set to ROOT TRANS or ROOT FIXED

[3]/

[4]

NTR (Note

Transposition

Rule)

Determines the relative position of the root note in the chord, when con-

verted from the Source Pattern in response to chord changes. Refer to

the list below.

[5] –

[7]

NTT (Note

Transposition

Table)

Sets the note transposition table for the source pattern. Refer to the list

below.

[8]NTT BASS ON/

OFF

The channel for which this is set to ON will be played back by the bass

root note, when the on-bass chord is recognized by the instrument.

When NTR is set to GUITAR and this parameter is set to ON, only notes

assigned to bass will be played back by the bass root note.

ROOT TRANS

(Root Transpose)

When the root note is transposed, the interval

between notes is maintained. For example, the

notes C3, E3 and G3 in the key of C become F3,

A3 and C4 when they are transposed to F. Use

this setting for channels that contain melody

lines.

ROOT FIXED The note is kept as close as possible to the previ-

ous note range. For example, the notes C3, E3

and G3 in the key of C become C3, F3 and A3

when they are transposed to F. Use this setting

for channels that contain chord parts.

GUITAR This is exclusively for transposing guitar accompaniment. Notes are trans-

posed to approximate the chords played with natural guitar fingering.

BYPASS When NTR is set to ROOT FIXED, the transposition table used does not do

any note conversion. When NTR is set to ROOT TRANS, the table used

only converts the notes by maintaining the pitch relationship between notes.

MELODY Suitable for melody line transposition. Use this for melody channels such as

Phrase 1 and Phrase 2.

CHORD Suitable for chordal parts transposition. Use this for the Chord 1 and Chord

2 channels, especially when they contain piano or guitar-like chordal parts.

MELODIC MINOR

When the played chord changes from a major to a minor chord, this table

lowers the third interval in the scale by a semitone. When the chord changes

from a minor to a major chord, the minor third interval is raised by a semi-

tone. Other notes are not changed. Use this for melody channels of Sections

which respond only to major/minor chords, such as Intros and Endings.

MELODIC MINOR 5th In addition to the Melodic Minor transposition above, augmented and

diminished chords affect the 5th intervals of the Source Pattern.

When playing

a C major

chord.

When playing

an F major

chord.

When playing

a C major

chord.

When playing

an F major

chord.

36 CVP-601 Reference Manual

Styles – Playing Rhythm and Accompaniment –

When NTR is set to GUITAR

HARMONIC MINOR When the played chord changes from a major to a minor chord, this table

lowers the third and sixth intervals in the scale by a semitone. When the

chord changes from a minor to a major chord, the minor third and flatted

sixth intervals are raised by a semitone. Other notes are not changed. Use

this for chord channels of Sections which respond only to major/minor

chords, such as Intros and Endings.

HARMONIC MINOR

5th

In addition to the Harmonic Minor transposition above, augmented and

diminished chords affect the 5th note of the Source pattern.

NATURAL MINOR When the played chord changes from a major to a minor chord, this table

lowers the third, sixth and seventh intervals in the scale by a semitone.

When the chord changes from a minor to a major chord, the minor third,

flatted sixth and flatted seventh intervals are raised by a semitone. Other

notes are not changed. Use this for chord channels of Sections which

respond only to a Major/minor chord such as Intros and Endings.

NATURAL MINOR

5th

In addition to the Natural Minor transposition above, augmented and dimin-

ished chords affect the 5th note of the Source pattern.

DORIAN When the played chord changes from a major to a minor chord, this table

lowers the third and seventh intervals in the scale by a semitone. When the

chord changes from a minor to a major chord, the minor third and flatted

seventh intervals are raised by a semitone. Other notes are not changed. Use

this for chord channels of Sections which respond only to a Major/minor

chord such as Intros and Endings.

DORIAN 5th In addition to the Dorian transposition above, augmented and diminished

chords affect the 5th note of the Source pattern.

ALL-PURPOSE This table covers both strummed- and arpeggio-played sound.

STROKE Suitable for stroke-played sound of the guitar. Some notes may sound as if

it is muted — this is normal condition when the chord is played on guitar by

stroke.

ARPEGGIO Suitable for arpeggio-played sound of the guitar. Using this table, four

notes arpeggio sounds most beautiful.

CVP-601 Reference Manual 37

Styles – Playing Rhythm and Accompaniment –

3 HIGH KEY / NOTE LIMIT

4 RTR (Retrigger Rule)

These settings determine whether notes stop sounding or not and how they change pitch in response to

chord changes.

[4]/

[5]

HIGH KEY This sets the highest key (upper octave limit) of the note transposition for

the chord root change. Any notes calculated to be higher than the highest

key are transposed down to the next lowest octave. This setting is avail-

able only when the NTR parameter (page 35) is set to “Root Trans.”

[6] NOTE LIMIT

LOW

These set the note range (highest and lowest notes) for Voices recorded to

the Style channels. By judicious setting of this range, you can ensure that

the Voices sound as realistic as possible — in other words, that no notes

outside the natural range are sounded (e.g., high bass sounds or low pic-

colo sounds).

[7] NOTE LIMIT

HIGH

STOP The notes stop sounding.

PITCH SHIFT The pitch of the note will bend without a new attack to match the type of the

new chord.

PITCH SHIFT TO

ROOT

The pitch of the note will bend without a new attack to match the root of the

new chord.

RETRIGGER The note is retriggered with a new attack at a new pitch corresponding to the

next chord.

RETRIGGER TO

ROOT

The note is retriggered with a new attack at the root note of the next chord.

However, the octave of the new note remains the same.

C3-E3-G3

F3-A3-C4

♯

2-A

♯

2-C

♯

3-E

♯

3-G

♯

Example — When the highest key is F.

Root changes

Notes played

E3-G3-C4

F3-A3-C4

♯

3-G

♯

3-C

♯

Example — When the lowest note is C3 and the highest is D4.

Root changes

Notes played

High Limit

Low Limit

38 CVP-601 Reference Manual

Song Playback – Playing and Practice Songs –

Song Playback

– Playing and Practice Songs –

Contents

Editing Music Notation Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Using the Auto Accompaniment Features with Song Playback . . . . . . . . . . . . . . . . . . . . . . . . .40

Song Playback Related Parameters (Repeat settings, Channel settings, Guide Function) . . .41

• Keyboard Practice Using the Guide Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

• Playing Backing Parts with the Performance assistant Technology. . . . . . . . . . . . . . . . . . . . . . . .44

To view the music notation of the selected Song, press the [SCORE] button. You can change the notation

display as desired to suit your personal preferences. The settings here are maintained even when the power is

turned off.

NOTE You can save the setting here as a part of a Song by accessing [FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR  TAB [ ][ ] CHANNEL

 [A]/[B] SETUP. See page 56.

Editing Music Notation Settings

[1] LEFT ON/

OFF

Enables/disables display of the left-hand key range. Depending on other settings,

this parameter may be unavailable and may appear grayed out. If this is the case, go

to the detailed setting display (on page 39) and set the LEFT CH. parameter to any

channel except “AUTO.” Or, go to the display [FUNCTION]  [B] SONG SET-

TING and set the TRACK 2 parameter to any channel except “OFF” (page 41).

RIGHT (next parameter) and LEFT cannot be turned off at the same time.

[2] RIGHT ON/

OFF

Enables/disables display of the right-hand key range. RIGHT and LEFT (above)

cannot be turned off at the same time.

[3]CHORD

ON/OFF

Enables/disables display of the chords. If the selected Song does not contain chord

data, chords are not displayed.

[4]LYRICS

ON/OFF

Enables/disables display of the lyrics. If the selected Song does not contain lyric

data, lyrics are not displayed. When the Song contains Pedal events, pressing these

buttons can display the Pedal events, instead of displaying Lyrics.

CVP-601 Reference Manual 39

Song Playback – Playing and Practice Songs –

Pressing the [8] (SET UP) button calls up the detailed setting display. You can set the

view type by using the [1] – [6] buttons, then press the [8] (OK) button.

[5]NOTE ON/

OFF

Enables/disables display of the note name (pitch). The note name is indicated at the left

of the note. When the space between the notes is too small, the indication may be

moved to the top left of the note. When the Song contains Fingering events, pressing

these buttons can display the fingering, instead of displaying note names.

[7] SIZE Determines the display resolution (or zoom level) of the notation.

[8] SET UP See below.

[1] LEFT CH Determines which MIDI channel in the Song data is used for the left-hand/right-

hand part. This setting returns to AUTO when a different Song is selected.

AUTO

The MIDI channels in the Song data for the right- and left-hand parts are

assigned automatically — setting the parts to the same channel as the channel

which is specified in [FUNCTION]  [B] SONG SETTING (page 41).

1 – 16

Assigns the specified MIDI channel (1 – 16) to the respective left- or right-hand

parts.

OFF (LEFT CH only)

No channel assignment. This disables display of the left-hand key range.

[2]RIGHT CH

[3]/

[4]

KEY

SIGNATURE

This lets you enter key signature changes in the middle of a Song, at the stopped

position. This menu is useful when the selected Song contains no key signature

settings for displaying notation.

[5] QUANTIZE This gives you control over the note resolution in the notation, letting you shift

or correct the timing of all displayed notes so that they line up to a particular

note value. Make sure to select the smallest note value used in the Song.

[6] NOTE NAME Selects the type of the note name indicated at the left of the note in the notation

from among the following three types. The settings here are available when the

NOTE ON/OFF parameter above is set to ON.

A, B, C

Note names are indicated as letters (C, D, E, F, G, A, B).

Fixed DO

Note names are indicated in solfeggio and differ depending on the selected lan-

guage.

Movable DO

Note names are indicated in solfeggio according to the scale intervals, and as

such are relative to the key. The root note is indicated as Do. For example, in the

key of G major the root note of “Sol” would be indicated as “Do.” As with

“Fixed Do,” the indication differs depending on the selected language.

40 CVP-601 Reference Manual

Song Playback – Playing and Practice Songs –

When playing back a Song and a Style at the same time, channels 9-16 in the Song data are replaced with

Style channels – allowing you to play the accompaniment parts of the Song yourself. Try playing chords

along with the Song playback as shown in the instructions below. When playing back a Song and a Style at

the same time, we recommend that you use the Preset Songs in the “Sing-a-long” folder.

1 Select a Song.

2 Select a Style.

3 Press the STYLE [ACMP ON/OFF] button to turn on the Auto Accompaniment

function.

4 Press the STYLE [SYNC START] button to enable standby — letting you

simultaneously start the accompaniment as soon as you start playing.

5 While holding down the SONG [STOP] button, press the [PLAY/PAUSE] button to

enable synchronized start for the Song.

6 Press the STYLE [START/STOP] button or play chords with your left hand.

The Song and Style starts playing. When you play chords, pressing the [SCORE] button and turning

CHORD on (page 38) allows you to see the chord information.

NOTE When playing back a Song and a Style at the same time, the tempo value set in the Song is automatically used.

When Song playback is stopped, the Style playback is also stopped at the same time.

Using the Auto Accompaniment Features with Song Playback

CVP-601 Reference Manual 41

Song Playback – Playing and Practice Songs –

The instrument has a variety of Song playback functions — repeat playback, various guide settings, etc. —

which can be accessed in the display below.

Call up the operation display.

[FUNCTION]  [B] SONG SETTING

Song Playback Related Parameters (Repeat settings, Channel

settings, Guide Function)

[A]/[B] GUIDE MODE See page 42.

[C] GUIDE LAMP

[D] GUIDE LAMP

TIMING

[H] REPEAT MODE Determines the method of repeat playback.

OFF

Plays through the selected Song, then stops.

SINGLE

Plays through the selected Song repeatedly.

ALL

Continues playback through all the Songs in the specified folder repeat-

edly.

RANDOM

Continues playback at random through all the Songs in the specified

folder repeatedly.

NOTE The preset Songs in the “Follow Lights” folder contain the Guide settings. These Songs are inap-

propriate for use with ALL or RANDOM repeat.

[I] PHRASE

MARK REPEAT

Phrase Mark is a pre-programmed part of some Song data, which speci-

fies a certain location (set of measures) in the Song. When this is on, the

section corresponding to the specified Phrase Mark number is repeatedly

played back.

[1] TRACK 2

These parameters determine which MIDI channel in the Song data is assigned

to the Left- or Right-hand part of the Guide function and the Song Score

function.

[2] TRACK 1

42 CVP-601 Reference Manual

Song Playback – Playing and Practice Songs –

Keyboard Practice Using the Guide Function

The keyboard guide lamps indicate the notes (location and timing) for you to play.

1 Select the desired Song for practicing the keyboard or singing.

2 Call up the setting display.

[FUNCTION]  [B] SONG SETTING

3 Use the [A]/[B] buttons to select the desired Guide function type.

[3] AUTO CH SET When set to “ON,” this automatically sets the proper MIDI channels for

the Right- and Left hand parts pre-programmed in the commercially

available Song data. Normally, this should be set to “ON.”

[5]/

[6]

LYRICS

LANGUAGE

Determines the language of the displayed lyrics.

AUTO

When the language is specified in the Song data, the lyrics are displayed

accordingly. When the language is not specified in the Song data, the lyr-

ics language is regarded as INTERNATIONAL below.

INTERNATIONAL

Handles the displayed lyrics as a western language.

JAPANESE

Handles the displayed lyrics as Japanese.

[7]QUICK START

On some commercially available Song data, certain settings related to the

Song (such as Voice selection, volume, etc.) are recorded to the first measure,

before the actual note data. When Quick Start is set to “ON,” the instrument

reads all initial non-note data of the Song at the highest possible speed, then

automatically switches to the appropriate tempo at the first note. This allows

you to start playback as quickly as possible, with a minimum pause for read-

ing of data.

[8] P.A.T.

(Performance

assistant)

See page 44.

CVP-601 Reference Manual 43

Song Playback – Playing and Practice Songs –

Guide menu for keyboard practice

• Follow Lights

With this function, the keyboard guide lamps indicate which notes you should play. Song playback

pauses and waits for you to play. When you play the correct notes, Song playback continues.

•Any Key

With this function, you can play the melody of a Song just by pressing a single key (any key is OK) in

time with the rhythm. Song playback pauses and waits for you to play any key. Simply play a key on the

keyboard in time with the music and Song playback continues.

•Your Tempo

The same as Follow Lights, except that Song playback matches the speed at which you play.

Guide menu for singing

•Karao-Key

This function lets you control the Song playback timing with just one finger, while you sing along. This

is useful for singing to your own performance. Song playback pauses, waiting for you to sing. Simply

play a key on the keyboard (any key is fine) and Song playback continues.

4 Turn the [GUIDE] button on.

5 Call up the Score display by pressing the [SCORE] button.

6 Press the SONG [PLAY/PAUSE] button to start playback.

Practice playing the keyboard or singing, along with the Guide type selected in step 3.

NOTE The guide lamps light according to Song channels recorded to Track 1 and 2 and the chord data in the Song (when such data is included). If the guide

lamps do not light as intended, you may need to assign the appropriate right- and left-hand channels to Track 1 and 2 respectively (page 41).

7 Press the SONG [STOP] button to stop playback.

NOTE If you want to turn the guide lamps off, press the [C] (GUIDE LAMP) button in the SONG SETTING display (in step 3 as described above).

NOTE You can save the Guide settings as a part of the Song data (page 56). For Songs to which the Guide settings have been saved, the Guide function will be

automatically turned on and the related settings will be recalled when the Song is selected.

Determining the timing by which the keyboard guide lamps light (GUIDE LAMP TIMING)

Press the [D] button in the SONG SETTING display in step 3 to select the timing by which the keyboard

guide lamps light.

•JUST

The guide lamps light in time with the music, at the same timing you should play.

•NEXT

The guide lamps light slightly ahead of the music, indicating the notes you should play next. The guide

lamps flash if you fail to play the keys with the correct timing.

44 CVP-601 Reference Manual

Song Playback – Playing and Practice Songs –

Playing Backing Parts with the Performance assistant Technology

This feature lets you play your own backing parts on the keyboard along with Song playback, and have them

sound perfectly appropriate (even though you might be playing wrong notes).

1 Select a Song containing chord data.

The Performance assistant technology applies only to Songs containg chord data. To confirm whether the

selected Song contains chord data or not, return to the Main display then start playback. If the current

Song contains chord data, the Main display shows the current chord type. After stopping playback, go to

the next step.

2 Call up the operation display.

[FUNCTION]  [B] SONG SETTING

3 Press the [8] button to turn the P.A.T. (performance assistant technology) on.

4 Press the SONG [PLAY/PAUSE] button to start playback.

5 Play the keyboard.

Along with Song playback, try playing the bass line with the left hand area while playing various phrases

or chords with the right hand area. Even if you do not know what notes should be played, don’t worry and

play any keys as desired! Only the harmonically “correct” notes matching the current chord are sounded,

regardless of the notes you actually play.

6 Press the SONG [STOP] button to stop playback.

7 Press the [8] button to turn the P.A.T. off.

NOTE Selecting another Song may reset P.A.T. to OFF.

Current chord

Song Recording via MIDI – Recording Your Performance via MIDI –

CVP-601 Reference Manual 45

Song Recording via MIDI

– Recording Your Performance via MIDI –

Contents

Creating/Editing Songs (Song Creator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

• Recording Melodies (Step Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

• Recording Chords (Step Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

• Re-Recording a Specific Section — Punch In/Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

• Editing Channel Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

• Editing Chord Events, Notes, System Exclusive Events and Lyrics . . . . . . . . . . . . . . . . . . . . . . . 57

To create a Song, you can compose your performance by entering it one event at a time (called “Step

Recording”), as well as recording your performance in real time (described in the Owner’s Manual). This

section explains operations of Step Recording and re-recording or editing existing Song data.

Call up the operation display.

[FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR

There are six Pages (tabs) in the Song Creator display.

•REC MODE For re-recording the Song. See page 52.

• CHANNEL

For editing the Channel events. See page 54.

•CHORD For recording the Chords and Sections with timing (page 49) or edits them (page 58).

•1-16 For recording the melodies (Step Recording; see below) or edits the recorded melodies

(page 58).

•SYS/EX. For editing the System Exclusive events (tempo, time signature, etc.). See page 58.

•LYRICS For inputting/editing the Song name and lyrics. See page 58.

Recording Melodies (Step Recording)

1 Press the SONG [REC] and SONG [STOP] buttons simultaneously.

A blank Song (“New Song”) is called up for recording.

NOTE Selecting a blank Song initializes the panel settings.

Creating/Editing Songs (Song Creator)

46 CVP-601 Reference Manual

Song Recording via MIDI – Recording Your Performance via MIDI –

2 Call up the operation display.

[FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR  TAB [ ][ ] 1-16

3 Press the [F] button to select the channel for recording.

4 Press the [G] (STEP REC) button to call up the STEP RECORD display.

5 Start Step Recording by using the [A] – [J] buttons and [1] – [8] buttons.

Refer to the example on page 47 for specific instructions.

[A]/[B]/[C] Moves the cursor in the list.

[G] Determines the velocity (loudness) of the note to be entered. The velocity

value can be specified within a range from 1 to 127. The higher the velocity

value, the louder the sound becomes.

Kbd.Vel: Actual resulting velocity

fff: 127

ff: 111

f: 95

mf: 79

mp: 63

p: 47

pp: 31

ppp:15

[H] Determines the gate time (note length) of the note to be entered.

Normal: 80%

Tenuto: 99%

Staccato: 40%

Staccatissimo: 20%

Manual: The gate time can be set to any desired percentage by using the

[DATA ENTRY] dial.

When a note is input, the location

(bar: beat: clock), note name, velocity

and length are shown as a list.

CVP-601 Reference Manual 47

Song Recording via MIDI – Recording Your Performance via MIDI –

Example of Step Recording — Melodies

In this example, keep in mind that one of the steps involves holding down a key on the keyboard while

executing the operation.

Select the Voice for recording after calling up the Step Recording display.

NOTE Since the music score displayed on the instrument is generated from the recorded MIDI data, it may not appear exactly the same as shown here.

1 Enter the first and second notes with a slur.

1-1 Press the [G] button to select “f.”

1-2 Press the [H] button to select “Tenuto.”

1-3 Press the [I] button to select the “dotted” note type.

1-4 Select the dotted quarter-note by using the [6] buttons.

1-5 Play the C3 key.

The first note is entered.

1-6 Press the [I] button to select the “normal” note type.

1-7 Press the [7] button to select the eight-note length.

1-8 Play the D3 key.

The second note is entered.

2 Enter the next notes and apply staccato.

2-1 Press the [H] button to select “Staccato.”

2-2 Press the [6] button to select the quarter-note length.

2-3 Play the keys E3 and F3 in order.

The first measure has been completed.

[I] Determines the note type to be entered: normal, dotted or triplet.

[J] DEL. Deletes the selected data.

[1] BAR Sets the position of the note to be entered.

[2]BEAT

[3]CLK

[4] –

[8]

Determines the note length to be entered: whole-note, half-note, quarter-note,

eighth-note or sixteenth-note.

1234

* The numbers shown in the illustra-

tion correspond to the following

operation step numbers.

48 CVP-601 Reference Manual

Song Recording via MIDI – Recording Your Performance via MIDI –

3 To enter a quarter-note rest, press the [6] button again.

To enter the rest, use the [4] – [8] buttons. (Press the button once to select the rest value, and

once again to actually enter it.) A rest having the specified note length will be entered.

4 Enter the next notes and apply a tie.

4-1 Press the [G] button to select “mp.”

4-2 Press the [H] button to select “Normal.”

4-3 While holding G3 key on the keyboard, press the [6] button.

Do not release the G3 key yet. Keep holding it while executing the following steps.

4-4 While holding the G3 key, press the C4 key.

Do not release the G3 and C4 keys yet. Keep holding the notes while executing the following step.

4-5 While holding the keys G3 and C4, press the [5] button.

After pressing the button, release the keys.

5 Press the SONG [STOP] button (or press the [C] button) to return to the top of the

Song, then hear the newly entered Song by pressing the [PLAY/PAUSE] button.

6 Press the [EXIT] button to exit from the Step Recording display.

7 Press the [I] (SAVE) button to execute the Save operation.

NOTICE

The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save opera-

tion.

CVP-601 Reference Manual 49

Song Recording via MIDI – Recording Your Performance via MIDI –

Recording Chords (Step Recording)

You can record Chords and Sections (Intro, Main, Ending, and so on) one at a time with precise timing.

These instructions show how to record chord changes using the Step Record function.

1 Press the SONG [REC] and SONG [STOP] buttons simultaneously.

A blank Song (“New Song”) is called up for recording.

NOTE Selecting a blank Song initializes the panel settings.

2 Select the Style you want to use in the Song.

3 Call up the operation display.

[FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR  TAB [ ][ ] CHORD

4 Press the [G] (STEP REC) button to call up the STEP RECORD display.

5 Start Step Recording.

For information on these

buttons, refer to page 46.

50 CVP-601 Reference Manual

Song Recording via MIDI – Recording Your Performance via MIDI –

Example of Step Recording — Chords

Before starting, make sure the [AUTO FILL IN] button is set to off.

1 Enter the chords for the Main A section.

1-1 Press the STYLE [MAIN A] button.

1-2 Press the [5] button to select the half-note length.

1-3 Play the chord C, F and G in the chord section of the keyboard.

2 Enter the chords for the Break section.

2-1 Press the STYLE [BREAK] button.

2-2 Press the [6] button to select the quarter-note length.

2-3 Play the chords F and G7 in the chord section of the keyboard.

NOTE To enter fill-ins, turn the [AUTO FILL IN] button to ON, and simply press the desired MAIN VARIATION [A] – [D] button.

C F G F G7 C

1 2 3

* The numbers shown in the illustration

correspond to the respective operation

step numbers below.

MAIN A BREAK MAIN B

NOTE This example uses a Style in 4/4 time.

1-2

1-3

1-1

2-2

2-3

2-1

CVP-601 Reference Manual 51

Song Recording via MIDI – Recording Your Performance via MIDI –

3 Enter the chords for the Main B section.

3-1 Press the STYLE [MAIN B] button.

3-2 Press the [4] button to select the whole-note length.

3-3 Play the chord C in the chord section of the keyboard.

4 Press the SONG [STOP] button (or press the [C] button) to return to the top of the

Song, then hear the newly entered Song by pressing the [PLAY/PAUSE] button.

5 Press the [EXIT] button to exit from the Step Recording display.

6 Press the [F] (EXPAND) button to convert the input chord change data into the Song

data.

7 Press the [I] (SAVE) button to execute the Save operation.

NOTICE

The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save opera-

tion.

3-2 3-33-1

52 CVP-601 Reference Manual

Song Recording via MIDI – Recording Your Performance via MIDI –

Re-Recording a Specific Section — Punch In/Out

When re-recording a specific section of an already-recorded Song, use the Punch IN/OUT function. In this

method, only the data between the Punch In point and the Punch Out point is overwritten with the newly

recorded data. Keep in mind that the notes before and after the Punch In/Out points are not recorded over,

although you will hear them play back normally to guide you in the Punch In/Out timing.

1 Select the Song you want to re-record.

2 Call up the operation display.

[FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR  TAB [ ][ ] REC MODE

3 Determine the settings for recording.

[1] –

[3]

REC START

(Punch In)

Determines the Punch In timing.

NORMAL

Overwrite recording starts when pressing the SONG [PLAY/PAUSE]

button or when you play the keyboard in the Synchro Standby mode.

FIRST KEY ON

The Song plays back normally, then starts overwrite recording as soon

as you play the keyboard.

PUNCH IN AT

The Song plays back normally up to the beginning of the indicated

Punch In measure, then starts overwrite recording at that point. You can

set the Punch In measure by pressing the [3] button.

[4] –

[6]

REC END

(Punch Out)

Determines the Punch Out timing.

REPLACE ALL

This deletes all data after the point at which recording is stopped.

PUNCH OUT

The Song position at which recording is stopped is regarded as the

Punch Out point. This setting maintains all data after the point at which

recording is stopped.

PUNCH OUT AT

Actual overwrite recording continues until the beginning of the speci-

fied Punch Out measure (set with the corresponding display button), at

which point recording stops and normal playback continues. This setting

maintains all data after the point at which recording is stopped. You can

set the Punch Out measure by pressing the [6] buttons.

CVP-601 Reference Manual 53

Song Recording via MIDI – Recording Your Performance via MIDI –

4 While holding the SONG [REC] button, press the desired track button.

5 Press the SONG [PLAY/PAUSE] button to start Punch In/Out recording.

Play the keyboard at the Punch In point and stop recording at the Punch Out point.

6 Press the [I] (SAVE) button to execute the Save operation.

NOTICE

The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save opera-

tion.

 Examples of re-recording with various Punch In/Out settings

This instrument features several different ways you use the Punch In/Out function. The illustrations below

indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded.

[7]/

[8]

PEDAL PUNCH

IN/OUT

When this is set to ON, you can use the center pedal to control the

Punch In and Punch Out points. While a Song is playing back, pressing

(and holding) the center pedal instantly enables Punch In recording,

while releasing the pedal stops recording (Punch Out). You can press

and release the center pedal as often as you want during playback to

punch in/out of overwrite recording. Note that the current function

assignment of the center pedal is cancelled when the Pedal Punch In/Out

function is set to ON.

NOTE Pedal Punch In/Out operation may be reversed depending on the particular pedal you’ve con-

nected to the instrument. If necessary, change the pedal polarity to reverse the control (page 79).

12345678

12345

12345678

12345

12345678

12345

12345678

6 8

12345 7

REC START setting

REC END setting

NORMAL

REPLACE ALL

NORMAL

PUNCH OUT

NORMAL

PUNCH OUT AT 006

FIRST KEY ON

REPLACE ALL

FIRST KEY ON

PUNCH OUT

FIRST KEY ON

PUNCH OUT AT 006

PUNCH IN AT 003

REPLACE ALL

PUNCH IN AT 003

PUNCH OUT

PUNCH IN AT 003

PUNCH OUT AT 006

Original data

Start overwrite

recording *1

Start overwrite

recording *1

Start overwrite

recording *1

Play back

original data

Play back

original data

Play back

original data

Play back

original data

Play back

original data

Play back

original data

Play the keyboard to start

overwrite recording

Play the keyboard to start

overwrite recording

Play the keyboard to start

overwrite recording

Start overwrite recording

Stop recording *2

Stop overwrite recording/

play original data

Stop recording *2

Stop overwrite recording/

play original data

Stop recording *2

Stop overwrite recording/

play original data

Deleted

*1 To avoid overwriting measures 1 –

2, start recording from measure 3.

*2 To stop recording, press the [REC]

button at the end of measure 5.

Previously recorded data

Newly recorded data

Deleted data

Deleted

54 CVP-601 Reference Manual

Song Recording via MIDI – Recording Your Performance via MIDI –

Editing Channel Events

1 In the CHANNEL Page, use the [A]/[B] buttons to select the edit menu, then edit the

data by using the [1] – [8] buttons.

For details of the edit menu and available settings, see page 55.

2 Press the [D] (EXECUTE) button to execute the operation for the current display.

After the operation (with the exception of the SETUP menu) is completed, this button changes to

“UNDO,” letting you restore the original data if you are not satisfied with the operation results. The Undo

function only has one level; only the previous operation can be undone.

3 Press the [I] (SAVE) button to execute the Save operation.

NOTICE

The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save opera-

tion.

CVP-601 Reference Manual 55

Song Recording via MIDI – Recording Your Performance via MIDI –

1 QUANTIZE

The Quantize function allows you to align the timing of all the notes in a channel. For example, if you

record the musical phrase shown at right, you may not play it with absolute precision, and your

performance may have been slightly ahead of or behind the precise timing. Quantize is a convenient way

to correct for this.

2 DELETE

You can delete the data of the specified channel in the Song. Select the channel whose data to be deleted

by using the [1] – [8] buttons, then press the [D] (EXECUTE) button to execute the operation.

[2]/

[3]

CHANNEL Determines which MIDI channel in the Song data is to be quantized.

[4] –

[6]

SIZE Selects the quantize size (resolution). For optimum results, you should

set the Quantize size to the shortest note value in the channel. For exam-

ple, if eighth notes are the shortest in the channel, you should use 1/8

note as the Quantize size.

The three Quantize settings marked with asterisks (*) are exceptionally

convenient, since they allow you to quantize two different note values at

the same time. For example, when the straight eighth notes and eighth

notes triplet are contained in the same channel, if you quantize by the

straight eighth notes, all notes in the channel are quantized to straight

eighth notes — completely eliminating any triplet feel. However, if you

use the eighth note + eighth note triplet setting, both the straight and

triplet notes will be quantized correctly.

[7]/

[8]

STRENGTH Determines how strongly the notes will be quantized. A setting of 100%

produces exact timing. If a value less than 100% is selected, notes will

be moved toward the specified quantization beats according to the spec-

ified percentage. Applying less than 100% quantization lets you pre-

serve some of the “human” feel in the recording.

After 1/8 note quantization

1/4 note

triplet

1/16 note

triplet

1/32 note

1/8 note+

1/8 note triplet*

1/16 note+

1/8 note triplet*

1/16 note+

1/16 note triplet*

1/8 note

triplet

Settings:

Original data

(assuming 4/4 meter)

Quantizing

strength = 100

Quantizing

strength = 50

Quarter-note length

56 CVP-601 Reference Manual

Song Recording via MIDI – Recording Your Performance via MIDI –

3 MIX

This function lets you mix the data of two channels and place the results in a different channel. It also lets

you copy the data from one channel to another.

4 CHANNEL TRANSPOSE

This allows you to transpose the recorded data of individual channels up or down by a maximum of two

octaves in semitone increments.

NOTE Make sure not to transpose channels 9 and 10. In general, Drum kits are assigned to these channels. If you transpose the channels of Drum kits, the

instruments assigned to each key will be changed.

5 SETUP

The current settings of the Mixing Console display and other panel settings can be recorded to the top

position of the Song as the Setup data. The Mixing Console and panel settings recorded here are

automatically recalled when the Song starts.

NOTE Before executing the Setup operation, move the Song position to the top of the Song by pressing the SONG [STOP] button.

[2]/

[3]

SOURCE 1 Determines the MIDI channel (1 – 16) to be mixed. All MIDI events of

the channel specified here are copied to the destination channel.

[4]/

[5]

SOURCE 2 Determines the MIDI channel (1 – 16) to be mixed. Only note events of

the channel specified here are copied to the destination channel. Besides

the values 1 – 16, there is a “COPY” setting that allows you to copy the

data from Source 1 to the destination channel.

[6]/

[7]

DESTINATION Determines the channel into which the mix or copy results will be placed.

[F]

CH 1–8/CH 9–16

Toggles between the two channel displays: Channels 1–8, and Channels 9–16.

[G] ALL CH To simultaneously set all channels to the same value, adjust the Channel

Transpose for one of the channels while holding down this button.

[1] –

[7]

SELECT Determines which playback features and functions will be automatically

called up along with the selected Song. The items selected here can be

recorded only to the top position of the Song, except for the KEY-

BOARD VOICE.

SONG

Records the tempo setting and all settings made from the Mixing Con-

sole.

KEYBOARD VOICE

Records the panel settings, including the Voice selection of the keyboard

parts (RIGHT 1, 2, and LEFT) and their on/off status. Panel settings

recorded here are same as the ones memorized to the One Touch Setting.

This can be recorded at any point in a Song.

SCORE SETTING

Records the settings in the Score display.

GUIDE SETTING

Records the settings of the Guide functions including the Guide ON/

OFF setting.

LYRICS SETTING

Records the settings in the Lyrics display.

[8] MARK ON For adding or removing checkmarks to/from the selected item. Checked

items are recorded to the Song.

[8] MARK OFF

CVP-601 Reference Manual 57

Song Recording via MIDI – Recording Your Performance via MIDI –

Editing Chord Events, Notes, System Exclusive Events and Lyrics

You can edit chord events, note events, System Exclusive events and lyrics in the same manner on the

corresponding display: CHORD, 1-16, SYS/EX and LYRICS. These displays are called “Event List display”

because some events are shown in a list view.

NOTE After you edit events in the CHORD tab display, press the [F] (EXPAND) button to convert the data into Song data.

NOTE Chord section data recorded with Realtime Recording cannot be indicated and edited on this display.

[A]/[B] Moves the cursor up/down and select the desired event.

[C] Moves the cursor to the top (beginning of the Song).

[D]/[E] Moves the cursor left/right and select the desired parameter of the high-

lighted event.

[H] FILTER Calls up the Filter display (page 59), letting you select only the events

you wish to be shown in the event list.

[I] SAVE Press to save the edited Song.

[J] MULTI SEL. Holding this button while using the [A]/[B] buttons lets you select multi-

ple events.

[1] BAR Determines the position (bar/beat/clock) of the data. One clock is equal to

1/1920th of a quarter note.

[2]BEAT

[3]CLK

[4]/

[5]

DATA ENTRY Adjusts the event value. For coarse adjustment, use the [4] buttons.

For fine adjustment, use the [5] buttons or [DATA ENTRY] dial.

[6] CUT Executes the cut/copy/delete/paste operation.

[7]COPY

[7] DELETE

[8]PASTE

[6] INS (INSERT) Adds a new event.

[8] CANCEL Cancels editing and restores the original value.

Indicates the event

value.

Indicates the location

(position) of the

corresponding event.

Indicates the event type.

See page 58.

Event List display

58 CVP-601 Reference Manual

Song Recording via MIDI – Recording Your Performance via MIDI –

 Chord Events (CHORD Page)

 Note Events (1-16 Page)

 System Exclusive Events (SYS/EX. Page)

 Lyrics Events (LYRICS Page)

Style Style

Tempo Tempo

Chord Chord root, Chord type, On Bass Chord

Sect Style Section (Intro, Main, Fill In, Break, Ending)

OnOff On/off status for each part (channel) of the Accompaniment Style

CH.Vol Volume for each part (channel) of the Accompaniment Style

S.Vol Overall volume of the Accompaniment Style

Note An individual note within a Song. Includes the note number which corresponds

to the key which was played, plus a velocity value based on how hard the key is

played, and the gate time value (the length of a note).

Ctrl (Control Change) Settings to control the Voice, such as volume, pan, filter and effect depth

(edited via the Mixing Console described in chapter 9), etc.

Prog (Program Change) MIDI program change number for selecting a Voice.

P.Bnd (Pitch Bend) Data for changing the pitch of a Voice continuously.

A.T. (Aftertouch)

This event is generated when pressure is applied to a key after the note is played.

ScBar (Score Start Bar) Determines the top measure of a Song.

Tempo Determines the tempo value.

Time (Time signature) Determines the time signature.

Key (Key signature) Determines the key signature, as well as the major/minor setting, for the music

score shown on the display.

XGPrm (XG

parameters)

Allows you to make various detailed changes to the XG parameters. Refer to

the “MIDI Data Format” in the MIDI Reference downloadable from the

Yamaha Manual Library.

SYS/EX. (System

Exclusive)

Displays the System Exclusive data in the Song. Keep in mind that you cannot

create new data or change the contents of the data here; however, you can

delete, cut, copy, and paste the data.

Meta (Meta event) Displays the SMF meta events in the Song. Keep in mind that you cannot cre-

ate new data or change the contents of the data here; however, you can delete,

cut, copy, and paste the data.

Name Allows you to enter the Song name.

Lyrics Allows you to enter lyrics.

Code CR: Enters a line break in the lyrics text.

LF: Clears the currently displayed lyrics and displays the next set of lyrics.

CVP-601 Reference Manual 59

Song Recording via MIDI – Recording Your Performance via MIDI –

Displaying Specific Types of Events

In the Event List displays, various types of events are shown. It may sometimes be difficult to pinpoint

the ones you want to edit. This is where the Filter function comes in handy. It lets you determine which

event types will be shown in the Event List displays.

1 Press the [H] (FILTER) button in the CHORD, 1-16, SYS/EX. or LYRICS displays.

2 Checkmark the desired item to be displayed.

3 Press the [EXIT] button to execute the settings.

[C] MAIN Displays all main types of events.

[D] CTRL. CHG Displays all specific Control Change message events.

[E] STYLE Displays all types of Style playback related events.

[H] ALL ON Checkmarks all event types.

[I]

NOTE/ALL OFF/

CHORD

“NOTE” or “CHORD” selects only NOTE/CHORD data.

“ALL OFF” removes all checkmarks.

[J] INVERT Reverses the checkmark settings for all boxes. In other

words, this enters checkmarks to all boxes that were previ-

ously unchecked and vice versa.

[2] –

[5]

Selects an event type to be checked or unchecked.

[6]/

[7]

MARK ON Enters/removes the checkmark for the selected event type.

The checked event types can be shown on the CHORD, 1-

16, SYS/EX or LYRICS Page.

[6]/

[7]

MARK OFF

60 CVP-601 Reference Manual

USB Audio

–

Playback and Recording Audio Files

–

This function is fully explained in the Owner’s Manual. Refer to the corresponding chapter in the Owner’s Manual.

Music Finder

– Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –

Contents

Registering a Song, Audio or Style File (SONG/AUDIO/STYLE) . . . . . . . . . . . . . . . . . . . . . . . . .60

• Recalling the registered data from Music Finder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Creating a Set of Favorite Records. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Editing Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Saving the Record as a Single File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

• Calling Up Music Finder Records Saved to USER or USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

By registering a Song, Audio or Style file in various locations (Preset, User and USB) into Music Finder, you

can conveniently and easily call up the file from the Song title.

NOTE If you want to register files in the USB flash memory, connect the USB flash memory containing the data to the [USB TO DEVICE] terminal.

1 On the corresponding File Selection display, select a Song, Audio or Style File to be

registered to the Music Finder.

2 Press the [6] (ADD TO MF) button to register the selected file to Music Finder.

The display automatically changes to the Music Finder Record Edit display.

Registering a Song, Audio or Style File (SONG/AUDIO/STYLE)

Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –

CVP-601 Reference Manual 61

Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –

3 Press [8] (OK) button to start the registration.

Press the [8] (CANCEL) button to cancel the registration.

4 Confirm that the registered file name is shown in the MUSIC column while (SONG),

(AUDIO) or the Style name is shown in the STYLE column.

Recalling the registered data from Music Finder

You can recall the registered Song, Audio or Style data in the same way as done in the “Selecting the Desired

Song from among the Panel Settings” and “Searching the Panel Settings” in the Owner’s Manual, chapter 7.

NOTE If you want to play back files in the USB flash memory, connect the USB flash memory containing the data to the [USB TO DEVICE] terminal beforehand.

To play back the registered files

• To play back the recalled Song file, press the SONG [PLAY/PAUSE] button after selecting the SONG

record.

• To play back the recalled Audio file, press the [J] (AUDIO) button in the MUSIC FINDER display after

selecting the AUDIO record.

• To play back the recalled Style file, select the Style record then follow the same procedure as Style

playback described in the Owner’s Manual, chapter 3.

62 CVP-601 Reference Manual

Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –

As convenient as the Search function is in exploring the depths of the Music Finder records, you may want to

create a custom “folder” of your favorite records — so you can quickly call up the panel settings and song

data you use frequently.

1 Call up the MUSIC FINDER display by pressing the [MUSIC FINDER] button and select

the desired record.

2 Press the [H] (ADD TO FAVORITE) button to add the selected record to the FAVORITE

display, then press the [G] (YES) button to actually add the record.

3 Call up the FAVORITE display by using the TAB [ ][ ] buttons, and check to see if

the record has been added.

Creating a Set of Favorite Records

Deleting Records from the FAVORITE Display

1 Select the record you want to delete from the FAVORITE display.

2 Press the [H] (DELETE FROM FAVORITE) button, then press the [G] (YES) button to actually

delete the record.

CVP-601 Reference Manual 63

Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –

You can create a new record by editing the currently selected record. The newly created records are automati-

cally saved in the internal memory.

1 Call up the MUSIC FINDER display by pressing the [MUSIC FINDER] button and select

the desired record to be edited.

2 Press the [8] (RECORD EDIT) button to call up the EDIT display.

3 Edit the record as desired.

Editing Records

[A] MUSIC Edits the song name. Pressing the [A] button calls up the pop-up window

to enter the song name.

[B] KEYWORD

Edits the keyword. Pressing the [B] button calls up the pop-up window to enter

the keyword.

[C] STYLE/SONG/

AUDIO

Changes the Style in case of STYLE record (panel settings). Pressing the

[C] button calls up the Style Selection display. After selecting the desired

Style, press the [EXIT] button to return back to the Edit display.

For SONG or AUDIO records, this field cannot be edited.

[D] BEAT Changes the beat (time signature) of the record for search purposes.

For SONG or AUDIO records, this field cannot be edited.

NOTE Keep in mind that the Beat setting made here is only for the Music Finder search function; this does

not affect the actual Beat setting of the Style itself.

[E] FAVORITE

Selects whether the edited record is entered to the FAVORITE display or not.

[1] TEMPO

Changes the Tempo. For SONG or AUDIO records, this field cannot be changed.

[2] SECTION Selects the section that will automatically be called up set when the

record is selected. This is useful, for example, when you want to have a

selected Style automatically be set up to start with an Intro section. For

SONG or AUDIO records, this field cannot be changed.

[4]

[5]/

[6]

GENRE Selects the desired genre.

[7] GENRE NAME Creates a new genre.

[I]

DELETE RECORD

Deletes the currently selected record.

64 CVP-601 Reference Manual

Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –

4 Enter the edits you’ve made to the record as described below.

Creating a new record

Press the [J] (NEW RECORD) button. The record is added to the ALL display. If you’ve entered the

record to the FAVORITE display in step 3, the record is added to both the ALL display and the FAVORITE

display.

Overwriting an existing record

Press the [8] (OK) button. If you set the record as a Favorite in step 3, the record is added to the

FAVORITE display. When you edit the record in the FAVORITE display, the record is overwritten.

To cancel and quit the Edit operation, press the [8] (CANCEL) button.

The Music Finder feature handles all the Records including the presets and additionally created records as a

single file. Keep in mind that individual records (panel settings and song data) cannot be handled as separate

files.

1 Call up the Save display.

[MUSIC FINDER]  [7] FILES

2 Press the TAB [ ][ ] buttons to select the location for saving (USER or USB).

3 Press the [6] (SAVE) button to save the file.

All records are saved together as a single file.

Calling Up Music Finder Records Saved to USER or USB

1 Call up the File Selection display.

[MUSIC FINDER]  [7] FILES

2 Use the TAB [ ][ ] buttons to select USER or USB.

3 Press the [A] – [J] buttons to select the desired Music Finder file.

When the file is selected, a message is displayed according to the content of the file. Press the desired

button.

Saving the Record as a Single File

[F] REPLACE All Music Finder records currently in the instrument are deleted and

replaced with the records of the selected file.

NOTICE

Selecting “REPLACE” automatically deletes all your original records from internal mem-

ory. Make sure that all important data has been archived to another location beforehand.

[G] APPEND The records called up are added to the record currently in the instrument.

[H] CANCEL Selecting this button aborts the operation (the selected file is not called

up).

Registration Memory – Saving and Recalling Custom Panel Setups –

CVP-601 Reference Manual 65

Registration Memory

– Saving and Recalling Custom Panel Setups –

Contents

Deleting or renaming the Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Confirming the Registration Memory Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Disabling Recall of Specific Items (Freeze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Calling Up Registration Memory Numbers in Order (Registration Sequence) . . . . . . . . . . . . . 68

• Confirming the Registration Sequence Setting in the Main Display . . . . . . . . . . . . . . . . . . . . . . . 70

• Saving the Registration Sequence Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

1 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the

REGISTRATION BANK Selection display, then select the Registration Memory bank

which contains the Registration you want to delete or rename.

2 Press the [8] (EDIT) button to call up the REGISTRATION EDIT display.

Registrations in the selected bank will be displayed.

Deleting or renaming the Registration

66 CVP-601 Reference Manual

Registration Memory – Saving and Recalling Custom Panel Setups –

3 To delete the Registration, press the [5] (DELETE) button; to rename it, press the

[1] (NAME) button.

4 Select a Registration you want to delete or rename by pressing one of the [A] – [D]

and [F] – [I] buttons.

The subsequent procedures are basically the same as those of renaming or deleting files described in

chapter 5 of the Owner’s Manual.

You can call up the information display to take a look which Voices and Style are memorized to the [1] – [8]

buttons of a Registration Memory Bank.

1 Simultaneously press the REGIST BANK [+] and [-] buttons to call up the Registration

Bank Selection display, then use the [A] – [J] buttons to select the desired Bank.

NOTE You can instantly call up the information display of the currently selected Registration Memory Bank by pressing the [DIRECT ACCESS] button and one

of the REGISTRATION MEMORY [1] – [8] buttons in sequence.

2 Press the [7] (INFO.) button to call up the information display.

By using the TAB [ ][ ] buttons, you can switch between the two information display pages:

information for the Registration Memory [1] – [4] buttons and information for the [5] – [8] buttons.

3 Press the [F] (CLOSE) button to close the information display.

NOTE If certain Voice parts are set to off, the Voice part names for the corresponding parts are shown in gray.

Confirming the Registration Memory Information

CVP-601 Reference Manual 67

Registration Memory – Saving and Recalling Custom Panel Setups –

Registration Memory lets you recall all the panel setups you made with a single button press. However, there

may be times that you want certain items to remain the same, even when switching Registration Memory

setups. For example, you may want to switch Voices or effect settings while keeping the same

accompaniment Style. This is where the Freeze function comes in handy. It lets you maintain the settings of

certain items and leave them unchanged, even when selecting other Registration Memory buttons.

1 Call up the operation display.

[FUNCTION]  [E] REGIST SEQUENCE/FREEZE/VOICE SET  TAB [ ][ ] FREEZE

2 Determine the items to be “frozen.”

Select the desired item by using the [2] – [7] buttons, then enter or remove the checkmark by

using the [8] (MARK ON)/[8] (MARK OFF) buttons.

3 Press the [F] (REGISTRATION FREEZE) button to turn the Freeze function on.

4 Press the [EXIT] button to exit from the operation display.

Disabling Recall of Specific Items (Freeze)

68 CVP-601 Reference Manual

Registration Memory – Saving and Recalling Custom Panel Setups –

As convenient as the Registration Memory buttons are, there may be times during a performance when you

want to quickly switch between settings — without having to take your hands from the keyboard. The

convenient Registration Sequence function lets you call up the eight setups in any order you specify, by

simply using the TAB [ ][ ] buttons or the pedal as you play.

1 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the

REGISTRATION BANK Selection display, then select the desired Registration Memory

bank to program a sequence.

2 Call up the operation display.

[FUNCTION]  [E] REGIST SEQUENCE/FREEZE/VOICE SET  TAB [ ][ ] REGISTRATION

SEQUENCE

3 If you intend to use a pedal to switch Registration Memory settings, specify here how

the pedal will be used — to advance or to reverse through the sequence.

Use the [C] (REGIST+ PEDAL) button to select the pedal for advancing through the sequence.

Use the [D] (REGIST- PEDAL) button to select the pedal for reversing through the sequence.

NOTE If you assign the function to a pedal here, the other function set in the PEDAL display (page 78) becomes invalid.

4 Use the [E] (SEQUENCE END) button to determine how Registration Sequence

behaves when reaching the end of the sequence.

•STOP Pressing the TAB [ ] button or the “advance” pedal has no effect. The sequence is

“stopped.”

•TOP The sequence starts again at the beginning.

•NEXT BANKThe sequence automatically moves to the beginning of the next Registration Memory

Bank in the same folder.

Calling Up Registration Memory Numbers in Order (Registration Sequence)

Indicates the name of the

currently selected

Registration Memory Bank.

CVP-601 Reference Manual 69

Registration Memory – Saving and Recalling Custom Panel Setups –

5 Program the Sequence order, from left to right.

Press one of the REGISTRATION MEMORY [1] – [8] buttons on the panel, then press the [6]

(INSERT) button to input the number.

6 Press the [F] button to turn the Registration Sequence function on.

7 Press the [EXIT] button to exit from the operation display.

[1] –

[4]

CURSOR Moves the cursor.

[5] REPLACE Replaces the number at the cursor position with the currently selected Regis-

tration Memory number.

[6] INSERT Inserts the number of the currently selected Registration Memory number

before the cursor position.

[7] DELETE Deletes the number at the cursor position.

[8] CLEAR Deletes all numbers in the sequence.

Indicates the Registration Memory

numbers, in the order of the current

Registration Sequence.

70 CVP-601 Reference Manual

Registration Memory – Saving and Recalling Custom Panel Setups –

Confirming the Registration Sequence Setting in the Main Display

In the Main display, you can confirm whether the Registration Memory numbers are called up according to

the sequence programmed on pages 68 – 69.

To shift the Registration Memory numbers, use the TAB [ ][ ] buttons when the Main display is shown.

When pedal operation has been set in step 3 on page 68, you can also use a pedal to select the Registration

Memory numbers in order.

To return to the first Sequence, press the TAB [ ] and [ ] buttons simultaneously when the Main display is

shown. This cancels the currently selected Sequence number (the box indicator at the top right goes out). The

first Sequence will be selected by pressing one of the TAB [ ][ ] buttons or by pressing the pedal.

NOTE The pedal can be used for Registration Sequence no matter which display is called up (except for the display in step 3 on page 68).

Saving the Registration Sequence Settings

The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the

sequence (SEQUENCE END) are included as part of the Registration Memory Bank file. To store your

newly programmed Registration Sequence, save the current Registration Memory Bank file.

NOTICE

Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you’ve saved it with the Regis-

tration Memory Bank file.

1 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the

REGISTRATION BANK Selection display.

2 Press the [6] (SAVE) button to save the Bank file.

The Registration Sequence is indicated at

the top right of the Main display, letting you

confirm the currently selected number.

Mixing Console – Editing the Volume and Tonal Balance –

CVP-601 Reference Manual 71

Mixing Console

– Editing the Volume and Tonal Balance –

Contents

Editing VOL/VOICE Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

• Adjusting Panning/Volume for Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

• Changing the Voice for Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Editing FILTER Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Editing TUNE Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Editing EFFECT Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

• Selecting an Effect Type for Each Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

• Creating an Original Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Editing EQ Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

• Editing and Saving the Selected Master EQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

The MIXING CONSOLE display called up via the [MIXING CONSOLE] button consists of five pages of

parameters. Use the TAB [ ]/[ ] buttons to call up the desired page, and set various parameters for each

part to adjust the balance between parts and create your desired sound. Note that the Save operation for your

settings will differ depending on the part. For instructions, refer to the Owner’s Manual.

Adjusting Panning/Volume for Each Part

1 Press the [D] (or [I]) button to select the PANPOT parameter or press the [E] (or [J])

button to select the VOLUME parameter.

2 Use the [1] – [8] buttons to adjust panning/volume for the desired part.

NOTE When the display for SONG CH 1-8 or SONG CH 9-16 is selected, you can switch between the two by pressing the [A] (PART) button.

3 Save your settings.

Refer to the Owner’s Manual, chapter 9.

Editing VOL/VOICE Parameters

PANPOT

VOLUME

72 CVP-601 Reference Manual

Mixing Console – Editing the Volume and Tonal Balance –

Changing the Voice for Each Part

You can change the Voice for each keyboard part, Style channel or Song channel.

1 Press the [C] (or [H]) button to select the VOICE parameter.

2 Press one of the [1] – [8] buttons to select the desired part.

The Voice Selection display appears.

3 Select a Voice.

Press one of the Voice category selection buttons on the panel, then select a Voice by using the [A] – [J]

buttons.

NOTE When the display for SONG CH 1- 8 or SONG CH 9-16 is selected, you can switch between the two by pressing the [A] (PART) button.

NOTE Some Voices (such as Organ Flutes) cannot be selected for Style channels.

NOTE Only Drum kit Voices and SFX kit Voices can be assigned to the RHY2 channel in the STYLE PART display.

NOTE When playing GM Song data, channel 10 can only be used for a Drum kit Voice.

4 Press the [EXIT] button to return to the MIXING CONSOLE display.

5 Save your settings.

Refer to the Owner’s Manual, chapter 9.

CVP-601 Reference Manual 73

Mixing Console – Editing the Volume and Tonal Balance –

Editing FILTER Parameters

[A] PART

This will be displayed only if SONG CH 1-8 or SONG CH 9-16 is selected

for the part. Toggles between the two channel displays: SONG CH 1-8 and

SONG CH 9-16. For details, refer to chapter 9 in the Owner’s Manual.

[D]/[I] HARMONIC

CONTENT

Allows you to adjust the resonance effect (page 13) for each part.

[E]/[J] BRIGHTNESS Determines the brightness of the sound for each part by adjusting the cut-

off frequency (page 13).

Editing TUNE Parameters

[A]/[B]/

[F]/[G]

PORTAMENTO

TIME

Portamento is a function that creates a smooth transition in pitch from the

first note played on the keyboard to the next. The Portamento Time deter-

mines the pitch transition time. Higher values result in a longer pitch

change time. Setting this to “0” results in no effect. This parameter is

available when the selected keyboard part is set to Mono.

[C]/[H] PITCH BEND

RANGE

Determines the range of the PITCH BEND for each keyboard part (when

a pedal is assigned to this function; page 78). The range is from “0” to

“12” with each step corresponding to one semitone.

[D]/[I] OCTAVE Determines the range of the pitch change in octaves, over two octaves up

or down for each keyboard part.

[E]/[J] TUNING Determines the pitch of each keyboard part.

[1] –

[3]

TRANSPOSE Allows you to set transposition for overall sound of the instrument

(MASTER), Song playback (SONG), or the keyboard pitch (KBD),

respectively.

74 CVP-601 Reference Manual

Mixing Console – Editing the Volume and Tonal Balance –

This instrument has an effect system featuring six separate blocks (Reverb, Chorus and DSP1-4). For each

block, you can assign the desired effect type individually. The effects are applied independently for each part

or globally for the entire sound according to the blocks: the effects of Reverb and Chorus blocks are applied

to all of the parts input to the Mixing Console, DSP1 is applied only to the Style and Song sounds (or applied

to a specific part of the Style or Song depending on the setting), and DSP2-4 are applied to the specific

keyboard parts and Song parts. Use these instructions to set up various effects for blocks and parts to enhance

the sound as desired.

Selecting an Effect Type for Each Block

NOTE When the display for SONG CH 1-8 or SONG CH 9-16 is selected, you can switch between the two by pressing the [A] (PART) button.

1 Press the [F] (TYPE) button in the EFFECT Page of the Mixing Console display.

The Effect Type Selection display is called up.

2 Use the [1]/[2] buttons to select the effect BLOCK.

Editing EFFECT Parameters

Effect

Block

Applicable parts Effect characteristics

REVERB All parts Reproduces the warm ambience of playing in a concert hall or jazz

club.

CHORUS All parts Produces a rich, “fat” sound as if several identical instruments are being

played simultaneously. In addition, other type effects (such as reverb,

delay, etc.) can also be selected in this effect block.

DSP1 STYLE PART,

SONG

CHANNEL 1-16

This effect is applied only to Style/Song parts. When the “Connection”

parameter selected in step 3 of “Creating an Original Effect” section

(on page 75) is set to “System,” the DSP1 effect will be applied overall

to the Style and Song. When it is set to “Insertion,” the DSP1 effect will

be applied to a specific part of the Style or Song.

DSP2-4 RIGHT 1,

RIGHT 2, LEFT,

SONG

CHANNEL 1-16

For each of DSP2-4, you can select one of the parts or channels listed at

left. When you select “RIGHT2” for DSP2, for example, the DSP2

Effect is applied only to the Right 2 part. Note that if you select a Song

or Style which requires the DSP2-4 Blocks, the part assignment of

these three Blocks will be changed automatically with last priority

according to the data.

234 5

CVP-601 Reference Manual 75

Mixing Console – Editing the Volume and Tonal Balance –

3 Use the [3]/[4] buttons to select the part to which you want to apply the effect.

Note that a part cannot be selected if “REVERB” or “CHORUS” is selected, or if the CONNECTION

parameter of “DSP1” is set to “System” (in step 3 of “Creating an Original Effect” below). This is because

only one of the Effect Types can be selected to be commonly applied to all available Parts.

4 Use the [5]/[6] buttons to select the effect CATEGORY.

5 Use the [7]/[8] buttons to select the effect TYPE.

If you want to edit the effect parameters, go on to the next operation.

Creating an Original Effect

1 Once you’ve selected an Effect Block and Effect Type above, press the [F] button to

call up the display for editing the effect parameters.

2 If you have selected one of the DSP2-4 effect blocks:

You can edit both the conventional parameters and the convenient Variation parameter. Press the [E] button

to move the cursor to the Variation parameter, then edit the value via the [6/[7] buttons. This

parameter is effective only when the DSP VARIATION is on. To move the cursor to the normal

parameters, press the [B] button.

NOTE The Variation parameter can be turned on or off by pressing the [VOICE EFFECT]  [5] (DSP VARIATION). This lets you instantly and significantly

change the sound of the effect.

3 Select the desired parameter for editing by using the [4]/[5] buttons, then

adjust the value by using the [6]/[7] buttons.

If you have selected the REVERB, CHORUS or DSP1 effect block, you can adjust the Effect Return Level

by pressing [8] button.

To re-select the Effect block, category and type, use the [1] – [3] buttons. The re-selected effect

configuration is displayed at the upper left side box in the display.

NOTE Keep in mind that in some cases noise may result if you adjust the effect parameters while playing the instrument.

76 CVP-601 Reference Manual

Mixing Console – Editing the Volume and Tonal Balance –

4 Press the [I] (SAVE) button to call up the display for saving your original effect.

5 Use the [3] – [6] buttons to select the destination for saving the effect.

The maximum number for effects that can be saved differs depending on the effect block.

6 Press the [I] (SAVE) button to save the effect.

When recalling the saved effect, use the same procedure as in steps 4 – 5 of “Selecting an Effect Type for

Each Block.”

Equalizer (also called “EQ”) is a sound processor that divides the frequency spectrum into multiple bands

that can be boosted or cut as required to tailor the overall frequency response. Usually an equalizer is used to

correct the sound from speakers to match the special character of the room. For example, you can cut some of

the low range frequencies when playing in large spaces where the sound is too “boomy,” or boost the high

frequencies in rooms and close spaces where the sound is relatively “dead” and free of echoes.

Editing EQ Parameters

[A] PART This will be displayed only if SONG CH 1-8 or SONG CH 9-16 is selected

for the part. Toggles between the two channel displays: SONG CH 1-8 and

SONG CH 9-16. For details, refer to chapter 9 in the Owner’s Manual.

[B]/[C] TYPE Selects the desired Master EQ type. This affects the overall sound of the

instrument.

[F] EDIT For editing the Master EQ. See page 77.

[D]/[I] EQ HIGH Boosts or attenuates the high EQ band for each part.

[E]/[J] EQ LOW Boosts or attenuates the low EQ band for each part.

CVP-601 Reference Manual 77

Mixing Console – Editing the Volume and Tonal Balance –

The instrument possesses a high grade five-band digital EQ. With this function, a final effect — tone control

— can be added to the output of your instrument. You can select one of the five preset EQ settings in the EQ

display. You can even create your own custom EQ settings by adjusting the frequency bands, and save the

settings to one of two User Master EQ types.

Editing and Saving the Selected Master EQ

Master Equalizer is EQ processing that is applied to the overall sound (except Audio) which is finally output

from the Effect block to the speakers or headphones.

1 Press the [F] (EDIT) button in the EQ Page of the Mixing Console display.

The MASTER EQ EDIT display is called up.

2 Use the [B]/[C] buttons to select a preset EQ type.

The set parameters of the selected EQ type are automatically shown at the bottom of the display.

3 Use the [3] – [7] buttons to boost or cut each of the five bands.

Use the [8] buttons to boost or cut all the five bands at the same time.

4 Adjust the Q (bandwidth) and the FREQ (center frequency) of the band selected in

step 3.

To adjust the bandwidth (also called “Shape” or “Q”), use the [1] buttons. The higher the value of Q,

the narrower the band width.

To adjust the FREQ (center frequency), use the [2] buttons. The available FREQ range is different for

each band.

5 Press the [H] or [I] (STORE 1 or 2) button to save the edited EQ type.

Up to two types of EQ can be created and saved. The saved EQ can be recalled from the EQ tab display by

using the [B]/[C] buttons.

Bandwidth (also called “Shape” or “Q”)

Gain

Freq

(Frequency)

5 bands 

LOW

EQ1

LOWMID

EQ2

MID

EQ3

HIGHMID

EQ4

HIGH

EQ5

78 CVP-601 Reference Manual

Connections – Using Your Instrument with Other Devices –

Connections

– Using Your Instrument with Other Devices –

Contents

Footswitch/Foot Controller Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

• Assigning Specific Functions to Each Foot Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

MIDI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

• MIDI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

• MIDI Transmit Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

• MIDI Receive Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

• Setting the Bass Note for Style Playback via MIDI Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

• Setting the Chord Type for Style Playback via MIDI Receive. . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Assigning Specific Functions to Each Foot Pedal

In addition to the footswitch or foot controller, the three piano pedals installed to the instrument (Right,

Center and Left pedals) can also be assigned to various functions here. The following explanations cover the

related operations and assignable functions (parameters).

NOTE For information on how to connect a Footswitch or Foot Controller, refer to the Owner’s Manual, chapter 10.

1 Call up the operation display.

[FUNCTION]  [D] CONTROLLER  TAB [ ][ ] PEDAL

2 Use the [A]/[B] buttons to select one of the three pedals or the AUX-connected pedal,

to which the function is to be assigned.

3 Use the [1] buttons to select the function to be assigned to the pedal specified in

step 2.

For information on available parameters, see pages 79 – 81.

NOTE You can also assign other functions to the pedal — Punch in/out of Song (page 52) and Registration Sequence (page 68). If you assign multiple func-

tions to the pedal, the priority is: Punch in/out of Song  Registration Sequence  functions assigned here.

Footswitch/Foot Controller Settings

CVP-601 Reference Manual 79

Connections – Using Your Instrument with Other Devices –

4 Use the [2] – [8] buttons to set the details of the selected functions (the part

for which the function is applied, etc.).

The available parameters differ depending on the function selected in step 3.

5 When you have selected the left or center pedal in step 2, press the [H] (DEPEND ON

R1 VOICE) button to turn this parameter OFF.

This setting locks the pedal function so that it does not change automatically when you change the Right 1

Voice.

6 If necessary, set the polarity of the pedal by using the [I] button.

Pedal on/off operation may differ depending on the particular pedal you’ve connected to the instrument.

For example, pressing down on one pedal may turn the selected function on, while pressing a different

make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation.

 Assignable Pedal Functions

For functions indicated with “*”, use only the foot controller; proper operation cannot be done with a

footswitch.

ARTICULATION When you use a Super Articulation Voice that has an effect assigned to the

pedal/footswitch, you can enable the effect by pressing the pedal/footswitch.

You can turn this function on or off for each keyboard part on this display.

VOLUME* Allows you to use a foot controller to control the volume. This function is

available only for the pedal connected to the instrument’s AUX PEDAL jack.

SUSTAIN Allows you to use a pedal to control the sustain. When you press and hold the

pedal, all notes played on the keyboard have a longer sustain. Releasing the

pedal immediately stops (damps) any sustained notes. If you are using the right

pedal or connected foot controller, the “HALF PEDAL POINT” parameter

allows you to specify how far down you should press on the pedal until the

damper effect starts working.

SOSTENUTO Allows you to use a pedal to control the Sostenuto effect. If you play a note or

chord on the keyboard and press the pedal while holding the note(s), the notes

will sustain as long as the pedal is held. However, all subsequent notes will not

sustain. This makes it possible to sustain a chord, for example, while other

notes are played staccato.

NOTE This function will not affect any of the Organ Flutes and only some of the Super Articulation Voices, even if

this has been assigned to the Foot Pedals.

SOFT Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces

the volume and changes the timbre of the notes you play. This is effective only

for certain appropriate Voices. You can turn this pedal function on or off for

each keyboard part on this display. If you are using the right pedal or connected

foot controller, the “HALF PEDAL POINT” parameter allows you to specify

how far down you should press on the pedal until the soft effect starts working.

80 CVP-601 Reference Manual

Connections – Using Your Instrument with Other Devices –

GLIDE When the pedal is pressed, the pitch changes, and then returns to normal pitch

when the pedal is released. The following parameters can be set for this func-

tion on this display.

UP/DOWN

Determines whether the pitch change goes up (is raised) or down (is lowered).

RANGE

Determines the range of the pitch change, in semitones.

ON SPEED

Determines the speed of the pitch change when the pedal is pressed.

OFF SPEED

Determines the speed of the pitch change when the pedal is released.

LEFT, RIGHT 1, 2

Turns this pedal function on or off for each keyboard part.

PORTAMENTO The portamento effect (a smooth slide between notes) can be produced while

the pedal is pressed. Portamento is produced when notes are played legato style

(i.e., a note is played while the preceding note is still held). The portamento

time can also be adjusted form the Mixing Console display (page 73). This

function does not affect certain Natural Voices, which would not sound appro-

priately with this function.

NOTE This function will not affect any of the Organ Flutes, Super Articulation Voices and only some of the Super

Articulation Voices, even if this has been assigned to the Foot Pedals.

PITCHBEND* Allows you to bend the pitch of notes up or down by using the pedal. This

function can be assigned to the right pedal or connected foot controller. The

following parameters can be set for this function on this display.

UP/DOWN

Determines whether the pitch change goes up (is raised) or down (is lowered).

RANGE

Determines the range of the pitch change, in semitones.

LEFT, RIGHT 1, 2

Turns this pedal function on or off for each keyboard part.

MODULATION* Applies a vibrato effect to notes played on the keyboard. Moreover, various

effects can be added to the S. Articulation Voice. The effect becomes deeper

when pressing down the foot controller. You can turn this pedal function on or

off for each keyboard part on this display.

DSP VARIATION Switches Voice Effect DSP VARIATION on and off.

VIBE ROTOR ON/OFF Switches the VIBRATE SW parameter on and off when the VIBE VIBRATE

effect type is selected.

HARMONY/ECHO Switches the HARMONY/ECHO Voice Effect on and off.

SCORE PAGE +/- While the Song is stopped, you can turn to the next/previous score page (one

page at a time).

LYRICS PAGE +/- While the Song is stopped, you can turn to the next/previous lyrics page (one

page at a time).

SONG PLAY/PAUSE Same as the SONG [PLAY/PAUSE] button.

STYLE START/STOP Same as the STYLE [START/STOP] button.

CVP-601 Reference Manual 81

Connections – Using Your Instrument with Other Devices –

TAP TEMPO Same as the [TAP TEMPO] button.

SYNCHRO START Same as the [SYNC START] button.

SYNCHRO STOP Same as the [SYNC STOP] button.

INTRO 1–3 Same as the INTRO [I]–[III] buttons.

MAIN A–D Same as the MAIN VARIATION [A]–[D] buttons.

FILL DOWN Plays a fill-in, which is automatically followed by the Main section of the but-

ton on the immediate left.

FILL SELF Plays a fill-in.

FILL BREAK Plays a break.

FILL UP Plays a fill-in, which is automatically followed by the Main section of the but-

ton on the immediate right.

ENDING1–3 Same as the ENDING/rit. [I]–[III] buttons.

FADE IN/OUT Switches Fade In /Fade Out function on and off.

FINGERD/FING ON

BASS

The pedal alternately switches between the Fingered and On Bass modes

(page 18).

BASS HOLD While the pedal is pressed, the Accompaniment Style bass note will be held

even if the chord is changed during Style playback. If the fingering is set to “AI

FULL KEYBOARD,” the function does not work.

PERCUSSION The pedal plays a percussion instrument selected by the [4] – [8]

buttons. You can use the keyboard to select the desired percussion instrument.

NOTE When you select the percussion instrument by pressing a key on the keyboard, the velocity with which you

press the key determines the percussion volume.

RIGHT 1 ON/OFF Same as the PART ON/OFF [RIGHT 1] button.

RIGHT 2 ON/OFF Same as the PART ON/OFF [RIGHT 2] button.

LEFT ON/OFF Same as the PART ON/OFF [LEFT] button.

OTS +/- Calls up the next/previous One Touch Setting.

82 CVP-601 Reference Manual

Connections – Using Your Instrument with Other Devices –

In this section, you can make MIDI-related settings for the instrument. The CVP-601 gives you a set of ten

pre-programmed templates that let you instantly and easily reconfigure the instrument to match your

particular MIDI application or external device. Also, you can edit the pre-programmed templates and save up

to ten of your original templates to the USER display.

NOTE You can save all your original templates as a single file to USB flash memory: [FUNCTION]  [J] UTILITY  TAB [ ][ ] SYSTEM RESET  [G]

MIDI SETUP FILES. See page 95.

1 Call up the operation display.

[FUNCTION]  [I] MIDI

2 Select a pre-programmed template from the PRESET Page (page 83).

If you have already created your original template and saved it to the USER Page, you can also select the

template from the USER Page.

3 Press the [8] (EDIT) button to call up the MIDI display to edit the selected template.

4 Use the TAB [ ][ ] buttons to call up the relevant setting display.

•SYSTEM MIDI System Settings (page 84)

• TRANSMIT MIDI Transmission Settings (page 85)

• RECEIVE MIDI Reception Settings (page 86)

•BASS Settings for the bass note of chord for Style playback via MIDI reception data (page 87)

• CHORD DETECT Settings for the chord type for Style playback via MIDI reception data (page 87)

5 When you’ve finished editing, press the [EXIT] button to return to the MIDI template

Selection display.

6 Select USER tab display by using the TAB [ ][ ] buttons, then press the [6] (SAVE)

button to save the edited template.

MIDI Settings

CVP-601 Reference Manual 83

Connections – Using Your Instrument with Other Devices –

 Pre-programmed MIDI Templates

ALL PARTS Transmits all parts including the keyboard parts (RIGHT 1, 2, and LEFT), with

the exception of Song parts.

KBD & STYLE Basically the same as “ALL PARTS” with the exception of how keyboard parts

are managed. The right-hand parts are handled as “UPPER” instead of RIGHT

1 and 2 and the left-hand part is handled as “LOWER.”

Master KBD In this setting, the instrument functions as a “master” keyboard, playing and

controlling one or more connected tone generators or other devices (such as a

computer/sequencer).

Song All transmit channels are set to correspond to Song channels 1–16. This is used

to play Song data with an external tone generator and to record Song data to an

external sequencer.

Clock Ext. Playback or recording (Song, Style, etc.) synchronizes with an external MIDI

clock instead of the instrument’s internal clock. This template should be used

when you wish to set the tempo on the MIDI device connected to the instru-

ment.

MIDI Accord 1 MIDI accordions allow you to transmit MIDI data and play connected tone

generators from the keyboard and bass/chord buttons of the accordion. This

template lets you play melodies from the keyboard and control Style playback

on the instrument with the left-hand buttons.

MIDI Accord 2 Basically the same as “MIDI Accord1” above, with the exception that the

chord/bass notes you play with your left hand on the MIDI Accordion are rec-

ognized also as MIDI note events.

MIDI Pedal 1 MIDI pedal units allow you play connected tone generators with your feet

(especially convenient for playing single note bass parts). This template lets

you play/control the chord root in Style playback with a MIDI pedal unit.

MIDI Pedal 2 This template lets you play the bass part for Style playback by using a MIDI

pedal unit.

MIDI OFF No MIDI signals are sent or received.

84 CVP-601 Reference Manual

Connections – Using Your Instrument with Other Devices –

MIDI Settings

The explanations here apply to the SYSTEM Page in step 4 on page 82.

Use the [A]/[B] buttons to select the parameters (below), then set the ON/OFF status by using the [1] –

[8] buttons.

1 Local Control

Turns the Local Control for each part on or off. When Local Control is set to “ON,” the keyboard of the

instrument controls its own (local) internal tone generator, allowing the internal Voices to be played

directly from the keyboard. If you set Local to “OFF,” the keyboard and controllers are internally

disconnected from the instrument’s tone generator section so that no sound is output when you play the

keyboard or use the controllers. For example, this allows you to use an external MIDI sequencer to play

the instrument’s internal Voices, and use the instrument keyboard to record notes to the external sequencer

and/or play an external tone generator.

2 Clock setting, etc.

 CLOCK

Determines whether the instrument is controlled by its own internal clock or a MIDI clock signal received

from an external device. INTERNAL is the normal Clock setting when the instrument is being used alone

or as a master keyboard to control external devices. If you are using the instrument with an external

sequencer, MIDI computer, or other MIDI device, and you want to synchronize it to that device, set this

parameter to the appropriate setting: MIDI, USB 1, or USB 2. In this case, make sure that the external

device is connected properly (e.g., to the instrument’s MIDI IN terminal), and that it is properly

transmitting a MIDI clock signal. When this is set for control by an external device (MIDI, USB 1 or USB

2), the Tempo is indicated as “Ext.” in the Main display.

NOTE If the Clock is set to something other than INTERNAL, the Style or Song cannot be played from the panel buttons.

 TRANSMIT CLOCK

Turns MIDI clock (F8) transmission on or off. When set to OFF, no MIDI clock or Start/Stop data is

transmitted even if a Song or Style is played back.

 RECEIVE TRANSPOSE

Determines whether or not the instrument’s transpose setting is applied to the note events received by the

instrument via MIDI.

 START/STOP

Determines whether incoming FA (start) and FC (stop) messages affect Song or Style playback.

3 MESSAGE SW (Message Switch)

 SYS/EX.

The “Tx” setting turns MIDI transmission of MIDI System Exclusive messages on or off. The “Rx” setting

turns MIDI reception and recognition of MIDI System Exclusive messages generated by external

equipment on or off.

 CHORD SYS/EX.

The “Tx” setting turns MIDI transmission of MIDI Chord System Exclusive data (chord detect, root and

type) on or off. The “Rx” setting turns MIDI reception and recognition of MIDI chord exclusive data

generated by external equipment on or off.

CVP-601 Reference Manual 85

Connections – Using Your Instrument with Other Devices –

MIDI Transmit Settings

The explanations here apply to the TRANSMIT Page in step 4 on page 82. This determines which parts will

be sent as MIDI data and over which MIDI channel the data will be sent.

1 Use the [A]/[B] buttons or [1]/[2] buttons to select the part for changing

transmit settings.

With the exception of the two parts below, the configuration of the parts is the same as those already

explained elsewhere in the Owner’s Manual.

UPPER

A keyboard part played on the right side of the keyboard from the Split Point for the Voices (RIGHT 1

and/or 2).

LOWER

A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This is not

affected by the on/off status of the [ACMP ON/OFF] button.

2 Use the [3] buttons to select a channel via which the selected part will be

transmitted.

NOTE If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel — resulting in unex-

pected sounds and possible glitches in the connected MIDI device.

NOTE Protected Songs cannot be transmitted even if the proper Song channels 1-16 are set to be transmitted.

3 Use the [4] – [8] button to determine the types of data to be sent.

The following MIDI messages can be set on the TRANSMIT/RECEIVE display.

NOTE (Note events) ..........page 58

CC (Control Change)........page 58

PC (Program Change) ......page 58

PB (Pitch Bend) .................page 58

AT (Aftertouch) .................page 58

12 3

The dots corresponding to each channel

(1–16) flash briefly whenever any data is

transmitted on the channel(s).

86 CVP-601 Reference Manual

Connections – Using Your Instrument with Other Devices –

MIDI Receive Settings

The explanations here apply to the RECEIVE Page in step 4 on page 82. This determines which parts will

receive MIDI data and over which MIDI channels the data will be received.

1 Use the [A]/[B] buttons or [1]/[2] buttons to select the channel to be received.

The instrument can receive MIDI messages over 32 channels (16 channels x 2 ports) by USB connection.

2 Use the [3] buttons to select the part via which the selected channel will be

received.

With the exception of the two parts below, the configuration of the parts is the same as those already

explained elsewhere in the Owner’s Manual.

KEYBOARD

The received note messages control the instrument’s keyboard performance.

EXTRA PART 1–5

There are five parts specially reserved for receiving and playing MIDI data. Normally, these parts are not

used by the instrument itself. The instrument can be used as a 32-channel multi-timbral tone generator by

using these five parts in addition to the parts.

3 Use the [4] – [8] button to determine the types of data to be received.

MIDI transmission/reception via the USB terminal and MIDI terminals

The relationship between the [MIDI] terminals and the [USB] terminal which can be used for

transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:

12 3

The dots corresponding to each channel

(1–16) flash briefly whenever any data is

received on the channel(s).

 MIDI reception  MIDI transmission

[MIDI IN] jack [USB TO HOST] jack [MIDI OUT] jack [USB TO HOST] jack

Port handling

USB2USB1

Merge

MIDI/USB1

01–16

USB2

01–16

MIDI/USB 01–16

CVP-601 Reference Manual 87

Connections – Using Your Instrument with Other Devices –

Setting the Bass Note for Style Playback via MIDI Receive

The explanations here apply to the BASS Page in step 4 on page 82. These settings let you determine the bass

note for Style playback, based on the note messages received via MIDI. The note on/off messages received at

the channel(s) set to “ON” are recognized as the bass note of the chord of Style playback. The bass note will

be detected regardless of the [ACMP ON/OFF] or split point settings. When several channels are

simultaneously set to “ON,” the bass note is detected from merged MIDI data received over the channels

1 Use the [A]/[B] buttons to select the channel.

2 Use the [1] – [8] buttons to set the desired channel to ON or OFF.

You can also set all channels to OFF by pressing the [I] (ALL OFF) button.

Setting the Chord Type for Style Playback via MIDI Receive

The explanations here apply to the CHORD DETECT Page in step 4 on page 82. These settings let you

determine the chord type for Style playback, based on the note messages received via MIDI. The note on/off

messages received at the channel(s) set to “ON” are recognized as the notes for detecting chords in Style

playback. The chords to be detected depend on the fingering type. The chord types will be detected

regardless of the [ACMP ON/OFF] or Split Point settings. When several channels are simultaneously set to

“ON,” the chord type is detected from merged MIDI data received over the channels.

The operation procedure is basically the same as that of the BASS display above.

88 CVP-601 Reference Manual

Utility – Making Global Settings –

Utility

– Making Global Settings –

Contents

CONFIG1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

CONFIG2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

OWNER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

SYSTEM RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

• Factory Reset — Restoring the Factory Programmed Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .94

• Custom Reset — Saving and Recalling Your Original Settings as a Single File . . . . . . . . . . . . . .95

Call up the operation display.

[FUNCTION] – [UTILITY] 

TAB [ ][ ] CONFIG 1

1 Fade In/Out

These parameters determine the behavior when the Style or Song playback is faded in/out.

CONFIG1

[3] FADE IN TIME Determines the time it takes for the volume to fade in, or go from mini-

mum to maximum (range of 0 – 20.0 seconds).

[4]FADE OUT

TIME

Determines the time it takes for the volume to fade out, or go from maxi-

mum to minimum (range of 0 – 20.0 seconds).

[5]FADE OUT

HOLD TIME

Determines the time the volume is held at 0 following the fade out (range

of 0 – 5.0 seconds).

Select the desired parameter:

1 Fade In/Out

2 Metronome

3 Parameter Lock

4 Ta p

5 Auto Power Off

CVP-601 Reference Manual 89

Utility – Making Global Settings –

2 Metronome

3 Parameter Lock

This function is used to “lock” specific parameters (effect, split point, etc.) to make them selectable only

via the panel control — in other words, instead of being changed via Registration Memory, One Touch

Setting, Music Finder, or Song and sequence data.

Use the [1] – [7] buttons to select the desired parameter, then lock it with the [8] (MARK ON)

button.

4 Tap

This allows you to set the drum sound and the velocity which will sound when the Tap function is used.

5 AUTO POWER OFF

Refer to the Owner’s Manual.

[2] VOLUME Determines the level of the metronome sound.

[3] –

[5]

SOUND Determines which sound is used for the metronome.

BELL OFF..................Conventional metronome sound, with no bell

accent.

BELL ON ...................Conventional metronome sound, with bell

accent.

ENGLISH VOICE ......Count in English

GERMAN VOICE......Count in German

JAPANESE VOICE ....Count in Japanese

FRENCH VOICE .......Count in French

SPANISH VOICE.......Count in Spanish

[6]/

[7]

TIME

SIGNATURE

Determines the time signature of the metronome sound.

[2] –

[4 ]

PERCUSSION Selects the instrument.

[5]/

[6]

VELOCITY Sets the velocity.

90 CVP-601 Reference Manual

Utility – Making Global Settings –

Call up the operation display.

[FUNCTION] – [UTILITY] TAB [ ][ ] CONFIG 2

1 Speaker-related settings

CONFIG2

[2]/

[3]

SPEAKER Determines whether or not the speaker will sound.

HEADPHONE SW

Speaker sounds normally, but is cut off when headphones are inserted to

the PHONES jack.

ON:

Speaker sound is always on.

OFF:

Speaker sound is off. You can only hear the instrument sound via the

headphones.

[4] I.A. CONTROL

ON/OFF

I.A. Control (Intelligent Acoustic Control) is a function which automati-

cally adjusts and controls the sound quality according to the overall vol-

ume of the instrument. Even when the volume is low, it permits both low

sounds and high sounds to be clearly heard. I.A. Control is effective only

from the sound output of the instrument speakers.

[5] I.A. CONTROL

DEPTH

This sets the depth of the I.A. Control. The higher the value, the more

clearly that low and high sounds are heard at lower volume levels.

[6]/

[7]

AUX IN NOISE

GATE

This effect mutes the input signal when the input from the AUX IN falls

below a specified level.

Select the desired parameter:

1 Speaker

2 Voice Category Button

Options/Display-related Set-

tings

CVP-601 Reference Manual 91

Utility – Making Global Settings –

2 Voice Category Button Options/Display-related settings

[1]/

[2]

VOICE

Transcripción de documentos

CV P- 601 Reference Manual This Reference Manual explains advanced features of this instrument that are not explained in the Owner’s Manual. Please read the Owner’s Manual first, before reading this Reference Manual. EN Contents 1 Performing Piano Songs on the Clavinova 3 2 Voices – Playing the Keyboard – 3 Voice Characteristics .........................................................3 Selecting GM&XG, MegaVoices and Other Voices from the Panel....................................................................5 Selecting the Harmony/Echo type......................................6 Pitch-Related Settings .......................................................8 Editing Voices (Voice Set) ...............................................10 Editing Organ Flutes Parameters.....................................16 3 Styles – Playing Rhythm and Accompaniment – 17 Selecting the Chord Fingering Type ................................17 Style Playback Related Settings ......................................19 Split Point Settings...........................................................21 Calling up the Panel Settings to Match the Style (Repertoire)......................................................................22 Memorizing an Original One Touch Setting .....................23 Confirming the One Touch Setting contents ....................23 Creating/Editing Styles (Style Creator) ............................24 4 Song Playback – Playing and Practice Songs – 38 Editing Music Notation Settings .......................................38 Using the Auto Accompaniment Features with Song Playback .................................................................40 Song Playback Related Parameters (Repeat settings, Channel settings, Guide Function) ......41 5 Song Recording via MIDI – Recording Your Performance via MIDI – 45 Creating/Editing Songs (Song Creator) ...........................45 6 USB Audio – Playback and Recording Audio Files – 60 7 Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song – 60 Registering a Song, Audio or Style File (SONG/AUDIO/STYLE) ...................................................60 Creating a Set of Favorite Records..................................62 Editing Records................................................................63 Saving the Record as a Single File..................................64 8 Registration Memory – Saving and Recalling Custom Panel Setups –65 Deleting or renaming the Registration .............................65 Confirming the Registration Memory Information ............66 Disabling Recall of Specific Items (Freeze) .....................67 Calling Up Registration Memory Numbers in Order (Registration Sequence) ..................................................68 9 Mixing Console – Editing the Volume and Tonal Balance – 71 Editing VOL/VOICE Parameters ......................................71 Editing FILTER Parameters .............................................73 Editing TUNE Parameters................................................73 Editing EFFECT Parameters ...........................................74 Editing EQ Parameters ....................................................76 10 Connections – Using Your Instrument with Other Devices – 78 Footswitch/Foot Controller Settings .................................78 MIDI Settings ...................................................................82 11 Utility – Making Global Settings – 88 CONFIG1 .........................................................................88 CONFIG2 .........................................................................90 MEDIA..............................................................................92 OWNER ...........................................................................93 SYSTEM RESET .............................................................94 12 Index 96 * Each chapter in this Reference Manual corresponds to the relevant chapters in the Owner’s Manual Using the PDF manual • To quickly jump to items and topics of interest, click on the desired items in the “Bookmarks” index to the left of the main display window. (Click the “Bookmarks” tab to open the index if it is not displayed.) • Click the page numbers that appear in this manual to go directly to the corresponding page. • Select “Find” or “Search” from the Adobe Reader “Edit” menu and enter a keyword to locate related information anywhere in the document. NOTE The names and positions of menu items may vary according to the version of Adobe Reader being used. • The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. 2 CVP-601 Reference Manual Performing Piano Songs on the Clavinova These operations are fully explained in the Owner’s Manual. Refer to the corresponding chapter in the Owner’s Manual. 1 Voices 2 Voices – Playing the Keyboard – – Playing the Keyboard – Contents Voice Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Selecting GM&XG, MegaVoices and Other Voices from the Panel . . . . . . . . . . . . . . . . . . . . . . . 5 Selecting the Harmony/Echo type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Pitch-Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 • Fine-tuning the Pitch of the Entire Instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 • Scale Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 • Changing the Part Assignment of the TRANSPOSE Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Editing Voices (Voice Set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 • Editable Parameters in the VOICE SET Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 • Disabling Automatic Selection of Voice Sets (Effects, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Editing Organ Flutes Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Voice Characteristics The Voice type and its defining characteristics are indicated above the Voice name in the Voice Selection display. S.Articulation! See the Owner’s Manual, chapter 2. Natural! These rich and luscious Voices are comprised mostly of keyboard instrument sounds and are especially intended for playing piano and other keyboard parts. They also take full advantage of Yamaha’s advanced sampling technology such as Stereo Sampling, Sustain Sampling, and Key-off Sampling. Live! These acoustic instrument sounds were sampled in stereo, to produce a truly authentic, rich sound — full of atmosphere and ambience. Cool! These Voices capture the dynamic textures and subtle nuances of electric instruments — thanks to a huge amount of memory and some very sophisticated programming. Sweet! These acoustic instrument sounds also benefit from Yamaha’s sophisticated technology — and feature a finely detailed and natural sound. CVP-601 Reference Manual 3 2 Voices – Playing the Keyboard – Drums Various drum and percussion sounds are assigned to individual keys, letting you play the sounds from the keyboard. SFX Various special effect sounds are assigned to individual keys, letting you play the sounds from the keyboard. Organ Flutes! This authentic organ Voice lets you use the Voice Set to adjust the various footages and craft your own original organ sounds. See page 16 for details. MegaVoice These Voices make special use of velocity switching. Normal voices use velocity switching, too — to change the sound quality and/or level of a voice according to how strongly or softly you play it. This makes the voice sound authentic and natural. With MegaVoices, however, each velocity range (the measure of your playing strength) has a completely different sound. For example, a guitar MegaVoice includes the sounds of various performance techniques. In conventional instruments, different Voices having those sounds would be called up via MIDI and played in combination to achieve the desired effect. However, now with MegaVoices, a convincing guitar part can be played with just a single Voice, using specific velocity values to play the desired sounds. Because of the complex nature of these Voices and the precise velocities need to play the sounds, they’re not intended for playing from the keyboard. They are, however, very useful and convenient when creating MIDI data — especially when you want to avoid using several different Voices just for a single instrument part. Actual sound maps for the MegaVoices are given in the separate Data List booklet that comes with your instrument. NOTE MegaVoices are not compatible with other models even though the model may have those types of Voices installed. Any Song or Style data you’ve created on the instrument using these Voices will not sound properly when played back on other instruments. NOTE MegaVoices sound differently depending on the keyboard range, velocity, touch, etc. Hence, if you apply a HARMONY/ ECHO effect, change the trans- pose setting or change the Voice Set parameters, unexpected or undesired sounds may result. MEGAEnhancer – Converting MIDI Songs to Songs for MegaVoice playing – MEGAEnhancer allows conversion of conventional XG/GM song data to song data optimized for use with the MegaVoice feature on a compatible instrument or tone generator. MEGAEnhancer makes MIDI guitar and bass tracks come to life, with enhanced realism and expression. MEGAEnhancer can be downloaded from the Internet. Yamaha Downloads http://download.yamaha.com/ 4 CVP-601 Reference Manual Selecting GM&XG, MegaVoices and Other Voices from the Panel The GM&XG Voices and MegaVoice cannot be directly called up from the VOICE category selection buttons. However, they can be called up via panel operation by following the procedure below. 1 In the Main display, select the keyboard part to which the desired Voice is to be assigned. 2 Press one of the VOICE category selection buttons to call up the Voice Selection display. 3 Press the [8] (UP) button to call up the Voice categories. 3 Voices – Playing the Keyboard – 2 4 4 Press the [2] (P2) button to display Page 2. 5 Press the desired [A] – [J] button to call up the Voice Selection display of GM&XG Voices, GM2 Voices, etc. MegaVoices are in the “Guitar” folder in the “StyleVoices” category. 6 Select the desired Voice. CVP-601 Reference Manual 5 Selecting the Harmony/Echo type This function lets you apply harmonies to your right hand performance according to the chords you play with your left hand, and trigger automatic echo or tremolo even by pressing a single note or two notes. 2 1 Press the [VOICE EFFECT] button. 2 Turn the Harmony/Echo on by pressing the [I] (HARMONY/ECHO) button. 3 Call up the operation display by pressing the [J] (TYPE SELECT) button. 4 Use the [1] – [3] buttons to select the Harmony/Echo type. The Harmony/Echo types are divided into the following groups, depending on the particular effect applied. Voices – Playing the Keyboard – Harmony Types These types apply the harmony effect to notes played in the right-hand section of the keyboard according to the chord specified in the left-hand section of the keyboard. (Note that the “1+5” and “Octave” settings are not affected by the chord.) Multi Assign Type This type applies a special effect to chords played in the right-hand section of the keyboard. Echo Types These types apply echo effects to notes played in the right-hand section of the keyboard in time with the currently set tempo.  Harmony Types When one of the Harmony Types is selected, the Harmony effect is applied to the note played in the righthand section of the keyboard according to the type selected above and the chord specified in the chord section of the keyboard shown below. Split Point Split Point RIGHT 1 and 2 Voices Chord section for Style playback and Harmony effect Split Point (for Style playback) Split Point (for the Voice) LEFT Voice Chord section for Style playback and Harmony effect 6 CVP-601 Reference Manual LEFT Voice and chord section for Harmony effect RIGHT 1 and 2 Voices  Multi Assign Type The Multi Assign effect automatically assigns notes played simultaneously on the right-hand section of the keyboard to separate parts (Voices). Both keyboard parts [RIGHT 1] and [RIGHT 2] should be turned on when using the Multi Assign effect. The Right 1 and Right 2 Voices are alternately assigned to the notes in the order you play.  Echo Types When one of the Echo Types is selected, the corresponding effect (echo, tremolo, trill) is applied to the note played in the right-hand section of the keyboard in time with the currently set tempo, regardless of the [ACMP ON/OFF] and the LEFT part on/off status. Keep in mind that Trill works when you hold down two notes on the keyboard simultaneously (last two notes if more than two notes are held), and it plays those notes alternately. Use the [4] – [8] buttons to select various Harmony/Echo settings. The available settings differ depending on the Harmony/Echo type. [4] VOLUME This parameter is available for all types with the exception of “Multi Assign.” It determines the level of the harmony/echo notes generated by the Harmony/Echo effect. [5] SPEED This parameter is only available when Echo, Tremolo, or Trill is selected in Type above. It determines the speed of the Echo, Tremolo, and Trill effects. [6] ASSIGN This parameter is available for all types with the exception of “Multi Assign.” This lets you determine the keyboard part via which the harmony/echo notes will be sounded. [7] CHORD NOTE ONLY This parameter is available when one of the Harmony Types is selected. When this is set to “ON,” the Harmony effect is applied only to the note (played in the right-hand section of the keyboard) that belongs to a chord played in the chord section of the keyboard. [8] TOUCH LIMIT This parameter is available for all types with the exception of “Multi Assign.” It determines the lowest velocity value at which the harmony note will sound. This allows you to selectively apply the harmony by your playing strength, letting you create harmony accents in the melody. The harmony effect is applied when you play the key strongly (above the set value). CVP-601 Reference Manual 2 Voices – Playing the Keyboard – 5 7 Pitch-Related Settings Fine-tuning the Pitch of the Entire Instrument You can fine-tune the pitch of the entire instrument — a useful feature when playing the Clavinova along with other instruments or CD music. Please note that the Tuning function does not affect the Drum Kit or SFX Kit Voices with name “*** kit” and audio files. 2 1 Call up the operation display. [FUNCTION]  [A] MASTER TUNE/SCALE TUNE  TAB [L][R] MASTER TUNE 2 Use the [4]/[5] buttons to set the tuning in 0.2 Hz steps, from 414.8–466.8 Hz. Press the both 4 or 5’s [] and [] buttons simultaneously to reset the value to the factory setting of 440.0 Hz. Voices – Playing the Keyboard – Scale Tuning You can select various scales for playing in custom tunings for specific historical periods or music genres. 1 Call up the operation display. [FUNCTION]  [A] MASTER TUNE/SCALE TUNE  TAB [L][R] SCALE TUNE 2 Use the [A]/[B] buttons to select the desired scale. The tuning of each note for the currently selected scale is shown.  Preset Scale types 8 EQUAL The pitch range of each octave is divided equally into twelve parts, with each half-step evenly spaced in pitch. This is the most commonly used tuning in music today. PURE MAJOR, PURE MINOR These tunings preserve the pure mathematical intervals of each scale, especially for triad chords (root, third, fifth). You can hear this best in actual vocal harmonies — such as choirs and a cappella singing. PYTHAGOREAN This scale was devised by the famous Greek philosopher and is created from a series of perfect fifths, which are collapsed into a single octave. The 3rd in this tuning are slightly unstable, but the 4th and 5th are beautiful and suitable for some leads. MEAN-TONE This scale was created as an improvement on the Pythagorean scale, by making the major third interval more “in tune.” It was especially popular from the 16th century to the 18th century. Handel, among others, used this scale. CVP-601 Reference Manual 3 WERCKMEISTER, KIRNBERGER This composite scale combines the Werckmeister and Kirnberger systems, which were themselves improvements on the mean-tone and Pythagorean scales. The main feature of this scale is that each key has its own unique character. The scale was used extensively during the time of Bach and Beethoven, and even now it is often used when performing period music on the harpsichord. ARABIC1, ARABIC2 Use these tunings when playing Arabic music. Change the following settings as necessary. [2] BASE NOTE Determines the base note for each scale. When the base note is changed, the pitch of the keyboard is transposed, yet maintains the original pitch relationship between the notes. [3] – [5] TUNE Select the desired note to be tuned by using the [3] buttons and tune it in cents by using the [4]/[5] buttons. Voices – Playing the Keyboard – 2 NOTE In musical terms a “cent” is 1/100th of a semitone. (100 cents equal one semitone.) [6]/ [7] PART SELECT [8] MARK ON/OFF Select the part to which the Scale Tune setting is applied by using the [6]/[7] buttons. Then press the [8] button to add a checkmark or press the [8] button to remove the checkmark. NOTE To register the Scale Tune settings to the Registration Memory, be sure to checkmark the SCALE item in the REGISTRATION MEMORY CONTENTS display. Changing the Part Assignment of the TRANSPOSE Buttons You can determine to which part (keyboard, Song or both) the TRANSPOSE [-]/[+] buttons are applied. This lets you transpose the pitch of the keyboard but not that of the Song (or vice versa) — allowing you to play along with a Song in a more comfortable key, for example. 1 Call up the operation display. [FUNCTION]  [D] CONTROLLER  TAB [L][R] KEYBOARD/PANEL 2 Use the [A]/[B] buttons to select “2. TRANSPOSE ASSIGN.” 3 Press the [4]/[5] buttons to select the desired transpose type. KEYBOARD When this is selected, the TRANSPOSE [-]/[+] buttons affect the pitch of keyboard played Voices and Style playback (controlled by the performance in the chord section of the keyboard) — but they do not affect Song playback. SONG When this is selected, the TRANSPOSE [-]/[+] buttons affect only the pitch of Song playback. MASTER When this is selected, the TRANSPOSE [-]/[+] buttons affect the overall pitch of the instrument, except audio playback. You can confirm the setting here by viewing the pop-up window called up via the TRANSPOSE [-]/[+] buttons. CVP-601 Reference Manual 9 Editing Voices (Voice Set) The instrument has a Voice Set feature that allows you to create your own Voices by editing some parameters of the existing Voices. Once you’ve created a Voice, you can save it as a User Voice to the USER drive or external devices for future recall. 2 1 Select the desired Voice (other than an Organ Flutes Voice). Organ Flutes Voices have a different editing method than described here. For instructions on editing the Organ Flutes Voices, see page 16. 2 Press the [6] (VOICE SET) button to call up the VOICE SET display. 3 Use the TAB [L][R] buttons to call up the relevant setting display. For information on the available parameters in each display, see the “Editable Parameters in the VOICE SET Displays” on page 11. Voices – Playing the Keyboard – 3 5 4 4 As necessary, use the [A]/[B] buttons to select the item (parameter) to be edited and edit the Voice by using the [1] – [8] buttons. By pressing the [D] (COMPARE) button, you can compare the sound of the edited Voice with the original (unedited) Voice. 5 Press the [I] (SAVE) button to save your edited Voice as a User Voice. NOTICE The settings will be lost if you select another Voice or turn the power to the instrument off without executing the Save operation. 10 CVP-601 Reference Manual Editable Parameters in the VOICE SET Displays The Voice Set parameters are organized into six different displays. The parameters in each display are described separately, below. NOTE The available parameters differ depending on the Voice.  PIANO Page This display is available only when the Natural! piano Voice (page 3) is selected. TUNING CURVE Determines the tuning curve. Select “FLAT” if you feel the tuning curve of the piano Voice does not quite match that of other instruments Voices. STRETCH: Tuning curve commonly used for solo piano performance. FLAT: Tuning curve in which the frequency is octave doubled over the entire keyboard range. [3]/ [4] KEY OFF SAMPLE Adjusts the volume of the key-off sound (the subtle sound that occurs when you release a key). [5]/ [6] SUSTAIN SAMPLE Adjusts the depth of sustain sampling for the damper pedal. [7]/ [8] STRING RESONANCE Adjusts the depth of string resonance. 2 Voices – Playing the Keyboard – [1]/ [2]  COMMON Page [1] VOLUME Adjusts the volume of the current edited Voice. [2]/ [3] TOUCH SENSE Adjusts the touch sensitivity (velocity sensitivity), or how greatly the volume responds to your playing strength. TOUCH SENSE DEPTH TOUCH SENSE OFFSET Changes to velocity curve according to VelDepth (with Offset set to 64) Changes to velocity curve according to VelOffset (with Depth set to 64) Actual Velocity for tone generator Actual Velocity for tone generator Offset = 96 (+64) Offset = 127 (+127) Depth = 127 (twice) 127 127 Offset = 64 (normal) Depth = 64 (normal) 64 64 Depends on offset Depth = 32 (half) Offset = 32 (-64) Depth = 0 0 64 127 Received Velocity (Actual KeyOn speed) 0 64 Depends on offset 127 Received Velocity (Actual KeyOn speed) Offset = 0 (-127) DEPTH Determines the velocity sensitivity, or how much the level of the Voice changes in response to your playing strength (velocity). OFFSET Determines the amount by which received velocities are adjusted for the actual velocity effect. CVP-601 Reference Manual 11 [4]/ [5] PART OCTAVE Shifts the octave range of the edited Voice up or down in octaves. When the edited Voice is used as any of the RIGHT 1–2 parts, the R1/R2 parameter is available; when the edited Voice is used as the LEFT part, the LEFT parameter is available. [6] MONO/POLY Determines whether the edited Voice is played monophonically or polyphonically. [7] PORTAMENTO TIME Sets the portamento time (pitch transition time) when the edited Voice is set to “MONO” above. NOTE The Portamento Time determines the pitch transition time. Portamento is a function that creates a smooth transition in pitch from the first note played on the keyboard to the next. 2  CONTROLLER Page 1 CENTER PEDAL Voices – Playing the Keyboard – 2 LEFT PEDAL These allow you to select the function to be assigned to the center or left pedal. [1] FUNCTION Selects the function to be assigned to the center or left pedal. For details on the pedal functions, see page 78. [2] – [8] RIGHT 1, RIGHT 2, LEFT, etc. Determines whether the assigned function is effective or not for the respective keyboard part. This also determines the depth for the function. For details, see page 78. 3 MODULATION When a pedal function is assigned to MODULATION, the pedal can be used to modulate the parameters below as well as the pitch (vibrato). Here, you can set the degree to which the pedal modulates each of the following parameters. 12 [2] FILTER Determines the degree to which the pedal modulates the Filter Cutoff Frequency. For details about the filter, see page 13. [3] AMPLITUDE Determines the degree to which the pedal modulates the amplitude (volume). [5] LFO PMOD Determines the degree to which the pedal modulates the pitch, or the vibrato effect. [6] LFO FMOD Determines the degree to which the pedal modulates the Filter modulation, or the wah effect. [7] LFO AMOD Determines the degree to which the pedal modulates the amplitude, or the tremolo effect. CVP-601 Reference Manual  SOUND Page FILTER Filter is a processor that changes the timbre or tone of a sound by either blocking or passing a specific frequency range. The parameters below determine the overall timbre of the sound by boosting or cutting a certain frequency range. In addition to making the sound either brighter or mellower, Filter can be used to produce electronic, synthesizer-like effects. BRIGHT (Brightness) Determines the cutoff frequency or effective frequency range of the filter (see diagram). Higher values result in a brighter sound. Volume Cutoff Frequency These frequencies are “passed” by the filter. [2] HARMO. (Harmonic content) Determines the emphasis given to the cutoff frequency (resonance), set in BRIGHT. above (see diagram). Higher values result in a more pronounced effect. Frequency (pitch) Cutoff range 2 Volume Voices – Playing the Keyboard – [1] Resonance Frequency (pitch) EG The EG (Envelope Generator) settings determine how the level of the sound changes in time. This lets you reproduce many sound characteristics of natural acoustic instruments — such as the quick attack and decay of percussion sounds, or the long release of a sustained piano tone. Level Sustain Level ATTACK Key on DECAY RELEASE Time Key off [3] ATTACK Determines how quickly the sound reaches its maximum level after the key is played. The lower the value, the quicker the attack. [4] DECAY Determines how quickly the sound reaches its sustain level (a slightly lower level than maximum). The lower the value, the quicker the decay. [5] RELES. (Release) Determines how quickly the sound decays to silence after the key is released. The lower the value, the quicker the decay. VIBRATO Vibrato is a quavering, vibrating sound effect that is produced by regularly modulating the pitch of the Voice. Pitch SPEED DEPTH DELAY Time [6] DEPTH Determines the intensity of the Vibrato effect. Higher settings result in a more pronounced Vibrato. [7] SPEED Determines the speed of the Vibrato effect. [8] DELAY Determines the amount of time that elapses between the playing of a key and the start of the Vibrato effect. Higher settings increase the delay of the Vibrato onset. CVP-601 Reference Manual 13  EFFECT/EQ Page 1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/VIB ROTOR 2 Voices – Playing the Keyboard – [1]/ [2] REVERB DEPTH Adjusts the reverb depth. [3]/ [4] CHORUS DEPTH Adjusts the chorus depth. [5] DSP ON/OFF Determines whether the DSP is on or off. [6] DSP DEPTH Adjusts the DSP depth. If you want to re-select the DSP type, you can do so in the “2 DSP” menu explained below. [7] VIBE ROTOR This will be displayed only if VIBE VIBRATE is selected for the DSP Type parameter explained below. Determines whether VIBE VIBRATE should be set to on or off when selecting the Voice. [1] – [4] DSP TYPE Selects the DSP effect category and type. Select a type after selecting a category. [5] – [8] VARIATION A Variation parameter is provided for each DSP type. Turning this on or off (in ON/OFF below), lets you instantly and significantly change the sound of the DSP effect. Here, you can edit the VARIATION on/ off status and variation’s parameter value setting. ON/OFF Determines whether the VARIATION is on or off. If you select VARIATION ON here, a variation of the DSP effect is assigned to the Voice. The variation parameter value can be adjusted in the VALUE menu explained below. If you select VARIATION OFF, standard variation of DSP is assigned. PARAMETER Displays the variation parameter. (This differs depending on the effect type and cannot be changed.) VALUE Adjusts the value of the DSP variation parameter. 2 DSP [5] [6] – [8] 3 EQ Determines the Frequency and Gain of the Low and High EQ bands. For information about EQ, refer to page 76.  HARMONY Page Harmony sets the Right 1 and 2 parts together. Select the Right 1 part in the Main display, before you set it. This has the same settings as the display of “Selecting the Harmony/Echo type” page 6 in step 3. 14 CVP-601 Reference Manual Disabling Automatic Selection of Voice Sets (Effects, etc.) Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically called up when a Voice is selected. However, you can also disable this feature by the operation in the relevant display as explained below. For example, if you want to change the Voice yet keep the same Harmony effect, set the HARMONY/ECHO parameter to OFF (in the display explained below). 1 Call up the operation display. [FUNCTION]  [E] REGIST SEQUENCE/FREEZE/VOICE SET  TAB [L][R] VOICE SET 2 Use the [A]/[B] buttons to select a keyboard part. 2 Voices – Playing the Keyboard – 2 3 3 Use the [4] – [8] buttons to enable/disable automatic calling up of the settings (ON or OFF) independently for each parameter group. CVP-601 Reference Manual 15 Editing Organ Flutes Parameters The Organ Flute Voices selected from the [ORGAN FLUTES] button can be edited by adjusting the footage levers, adding the attack sound, applying effects and equalizer, etc. NOTICE After editing, go to the Voice Selection display by pressing the [I] (PRESETS) button and save the setting. The settings will be lost if you select another Voice or turn the power to the instrument off without executing the Save operation.  FOOTAGE Page Refer to the Owner’s Manual, chapter 2.  VOLUME/ATTACK Page 2 Voices – Playing the Keyboard – Same as the FOOTAGE Page. [1] VOL (Volume) Adjusts the overall volume of the Organ Flutes. The longer the graphic bar, the greater the volume. [2] RESP (Response) Affects both the attack and release (page 13) portion of the sound, increasing or decreasing the response time of the initial swell and release, based on the FOOTAGE controls. The higher the value, the slower the swell and release. [3] VIB. SPEED Determines the speed of the vibrato effect controlled by the VIBRATO ON/OFF ([F]/[G] buttons) and VIBRATO DEPTH ([H] button). [4] MODE The MODE control selects one of two modes: FIRST and EACH. In the FIRST mode, attack (percussive sound) is applied only to the first notes played and held simultaneously; while the first notes are held, any subsequently played notes have no attack applied. In the EACH mode, attack is applied equally to all notes. [5] – [7] 4', 2 2/3', 2' These determine the attack sound volume of the ORGAN FLUTE Voice. The 4', 2-2/3' and 2' controls increase or reduce the volume of attack sound at the corresponding footages. The longer the graphic bar, the greater the attack sound volume. [8] LENG (Length) Affects the attack portion of the sound producing a longer or shorter decay immediately after the initial attack. The longer the graphic bar, the longer the decay.  EFFECT/EQ Page Same parameters as in the VOICE SET “EFFECT/EQ” Page explained on page 14. 16 CVP-601 Reference Manual Styles – Playing Rhythm and Accompaniment – Contents Selecting the Chord Fingering Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Style Playback Related Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Split Point Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Calling up the Panel Settings to Match the Style (Repertoire) . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Memorizing an Original One Touch Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Confirming the One Touch Setting contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3 Creating/Editing Styles (Style Creator). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 25 28 28 30 32 33 Styles – Playing Rhythm and Accompaniment – • Realtime Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Step Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Style Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Editing the Rhythmic Feel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Editing Data for Each Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Making Style File Format Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting the Chord Fingering Type There are seven different Fingering Types which let you specify the chord root and type for Style playback. 1 Call up the operation display. [FUNCTION]  [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING  TAB [L][R] CHORD FINGERING 2 Press the [1] – [3] buttons to select a fingering. For information on each fingering type, see page 18. Chord Tutor If you know the name of a chord but don’t know how to play it, the Chord Tutor function conveniently shows you which notes to play. On the CHORD FINGERING display, specify the Chord Root and Chord Type by using the [6] – [8] button. The notes you need to play are shown in the display. NOTE Depending on the chord, some notes may be omitted. CVP-601 Reference Manual 17 Chord Fingering Types SINGLE FINGER Makes it simple to produce orchestrated accompaniment using major, seventh, minor and minor-seventh chords by pressing a minimum number of keys on the Chord section of the keyboard. This type is available only for Style playback. The abbreviated chord fingerings described below are used: C For a major chord, press the root key only. Cm 3 Cm 7 For a seventh chord, simultaneously press the root key and a white key to its left. For a minor-seventh chord, simultaneously press the root key and both a white and black key to its left. Styles – Playing Rhythm and Accompaniment – MULTI FINGER Automatically detects Single Finger or Fingered chord fingerings, so you can use either type of fingering without having to switch fingering types. FINGERED Lets you finger your own chords on the chord section of the keyboard, while the instrument supplies appropriately orchestrated rhythm, bass, and chord accompaniment in the selected Style. The Fingered type recognizes the various chord types which are listed on the separate Data List booklet and can be looked up using the Chord Tutor function on page 17. FINGERED ON BASS Accepts the same fingerings as Fingered, but the lowest note played in the Chord section of the keyboard is used as the bass note, allowing you to play “on bass” chords. (In the Fingered mode, the root of the chord is always used as the bass note.) FULL KEYBOARD Detects chords in the entire key range. Chords are detected in a way similar to Fingered, even if you split the notes between your left and right hands — for example, playing a bass note with your left hand and a chord with your right, or by playing a chord with your left hand and a melody note with your right. AI FINGERED Basically the same as Fingered, with the exception that less than three notes can be played to indicate the chords (based on the previously played chord, etc.). AI FULL KEYBOARD When this advanced fingering type is engaged, the instrument will automatically create appropriate accompaniment while you play just about anything, anywhere on the keyboard using both hands. You don’t have to worry about specifying the Style chords. Although the AI Full Keyboard type is designed to work with many songs, some arrangements may not be suitable for use with this feature. This type is similar to Full Keyboard, with the exception that less than three notes can be played to indicate the chords (based on the previously played chord, etc.). 9th, 11th and 13th chords cannot be played. This type is available only for Style playback. NOTE “AI” stands for “Artificial Intelligence.” 18 For a minor chord, simultaneously press the root key and a black key to its left. C7 CVP-601 Reference Manual Style Playback Related Settings The instrument has a variety of Style playback functions which can be accessed in the display below. 1 Call up the operation display. [FUNCTION]  [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING  TAB [L][R] STYLE SETTING 2 Use the [1] – [8] buttons for each setting. [1] STOP ACMP Styles – Playing Rhythm and Accompaniment – 3 When [ACMP ON/OFF] is turned on and [SYNC START] is off, you can play chords in the chord section of the keyboard with the Style stopped, and still hear the accompaniment chord. In this condition — called “Stop Accompaniment” — any valid chord fingerings are recognized and the chord root/type are shown in the display. Here, you can determine whether the chord played in the chord section will sound or not in the Stop Accompaniment status. OFF The chord played in the chord section will not sound. STYLE The chord played in the chord section will sound via the Voices for the Pad part and the Bass channel of the selected Style. FIXED The chord played in the chord section will sound via the specified Voice, regardless of the selected Style. NOTE When the selected Style contains MegaVoices, unexpected sounds may result when this is set to “STYLE.” NOTE When you record a song, the chord detected by playing the Stop Accompaniment can be recorded regardless of the setting here. Please note that both the Voice that is sounded and the chord data will be recorded when set to “STYLE,” and only the chord data will be recorded when set to “OFF” or “FIXED.” [2] OTS LINK TIMING This applies to the OTS Link function. This parameter determines the timing in which the One Touch Settings change with the MAIN VARIATION [A] – [D] change. (The [OTS LINK] button must be on.) REAL TIME One Touch Setting is immediately called up when you press a MAIN VARIATION button. NEXT BAR One Touch Setting is called up at the next measure, after you press a MAIN VARIATION button. CVP-601 Reference Manual 19 [3] SYNCHRO STOP WINDOW This determines how long you can hold a chord before the Synchro Stop function is automatically cancelled. When the [SYNC STOP] button is turned on and this is set to a value other than “OFF,” this is automatically cancels the Synchro Stop function if you hold a chord for longer than the time set here. This conveniently resets Style playback control to normal, letting you release the keys and still have the Style play. In other words, if you release the keys sooner than the time set here, the Synchro Stop function works. [4] STYLE TOUCH Turns touch response for the Style playback on/off. When this is set to “ON,” the Style volume changes in response to your playing strength in the chord section of the keyboard. [5]/ [6] SECTION SET Determines the default section that is automatically called up when selecting different Styles (when Style playback is stopped). When set to “OFF” and Style playback is stopped, the active section is maintained even if the different Style is selected. When any of the MAIN A – D sections is not included in the Style data, the nearest section is automatically selected. For example, when MAIN D is not contained in the selected Style, MAIN C will be called up. [7] TEMPO This determines whether the tempo changes or not when you change Styles. If you want to avoid changing the tempo when selecting another Style, select LOCK or HOLD. 3 Styles – Playing Rhythm and Accompaniment – LOCK The tempo setting of the previous Style is maintained. HOLD The tempo setting of the previous Style is maintained while Style is played back and another Style is selected. While Style playback is stopped and another Style is selected, the tempo changes to that of the initial default tempo for the selected Style. RESET The tempo changes to that of the initial default tempo for the selected Style. [8] PART ON/OFF This determines whether the on/off status of the Style Channels (Parts) changes or not when you change Styles. If you want to avoid changing the Style Channel On/Off status when selecting another Style, select LOCK or HOLD. LOCK The Style Channel On/Off status of the previous Style is maintained. HOLD The Style Channel On/Off status of the previous Style is maintained while Style is played back and another Style is selected. While Style playback is stopped and another Style is selected, all Style Channels are set to On. RESET All Style Channels are set to On. 20 CVP-601 Reference Manual Split Point Settings These are the settings (two Split Points) that separate the different sections of the keyboard: the Chord section, the LEFT part section and the RIGHT 1 and 2 section. The two Split Point settings (below) are specified as note names. Chord section Split Point (L) Voice RIGHT 1–2 Voice LEFT 1 Call up the operation display. [FUNCTION]  [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING  TAB [L][R] SPLIT POINT 2 Set the Split Point. [F] Split Point (S+L) 3 Styles – Playing Rhythm and Accompaniment – Split Point (S) Sets the Split Point (S) and Split Point (L) to the same note. Press the [F] button and rotate the [DATA ENTRY] dial. Split Point (S+L) Chord section + Voice LEFT Voice RIGHT 1 and 2 [G] Split Point (S) Sets each Split Point. Press one of the desired buttons and rotate the [DATA ENTRY] dial. [H] Split Point (L) NOTE Split Point (L) cannot be set lower than Split Point (S). [1]/ [2] STYLE You can specify each Split Point by note name. “STYLE” indicates Split Point (S) and “LEFT” indicates Split Point (L). [3]/ [4] LEFT CVP-601 Reference Manual 21 Calling up the Panel Settings to Match the Style (Repertoire) The convenient Repertoire function automatically calls up the most appropriate panel settings (Voice number, etc.) for the currently selected Style. Before using the Repertoire function, you need to import Music Finder records (see instructions described in the Owner's Manual, chapter 7). NOTE The settings shown here are Music Finder Records. You can choose additional settings by using the Music Finder feature. 1 Select the desired Style from the Style Selection display. 2 Press the [5] (REPERTOIRE) button. Various appropriate panel settings matching the selected Style will be shown in the display. 3 Styles – Playing Rhythm and Accompaniment – 2 3 3 Use the [2] – [3] buttons to select the desired panel setting. NOTE Depending on the particular selected Style, there may not be any panel settings in the Repertoire function. 22 CVP-601 Reference Manual Memorizing an Original One Touch Setting While the panel settings appropriate for each preset Style are pre-programmed as One Touch Settings, you can also register your favorite settings to create original One Touch Settings. Because the One Touch Setting data is included in a Style, the Save operation will be done as a Style on the Style Selection display. 1 Select the desired Style to correspond to your One Touch Setting. 2 Set up the panel controls (such as Voice, effects, and so on) as desired. 3 Press the [MEMORY] button in the REGISTRATION MEMORY section. 3 4 4 Press one of the ONE TOUCH SETTING [1] – [4] buttons. A message appears in the display prompting you to save the panel settings. 5 Press [F] (YES) button to call up the Style Selection display and save the panel settings as a Style file. Styles – Playing Rhythm and Accompaniment – 3 NOTICE The panel settings memorized to each OTS button will be lost if you change the Style or turn the power off without executing the Save operation. Confirming the One Touch Setting contents You can check the information of the One Touch Setting [1] – [4] assigned to currently selected Style. 1 In the Style Selection display, press the [7] (OTS INFO.) button to call up the Information display. 2 1 NOTE You can also call up the Information display by pressing the [DIRECT ACCESS] button then pressing one of the ONE TOUCH SETTING [1] – [4] buttons. 2 Press the [F] (CLOSE) button to close the Information display. CVP-601 Reference Manual 23 Creating/Editing Styles (Style Creator) Styles are made up of fifteen different sections (Intro, Main, Ending, etc.) and each section has eight separate channels. With the Style Creator feature, you can create a Style by separately recording the channels, or by importing pattern data from other existing Styles. Sections Channels 3 You can use one of the three different methods described below to create a Style. The created Style can also be edited. Styles – Playing Rhythm and Accompaniment – • Realtime Recording This method lets you record the Style by simply playing the keyboard. See page 25. • Step Recording This method lets you to enter each note individually. See page 28. • Style Assembly This method lets you create a composite Style by combining various patterns from the internal preset Styles or from Styles you have already created. See page 28. Call up the operation display. [FUNCTION]  [F] DIGITAL REC MENU  [B] STYLE CREATOR NOTE The Style files created on this instrument can only be played back on instruments which are compatible with SFF GE. There are six Pages (tabs) in the Style Creator display. 24 • BASIC Creates the basic settings of the Style. You can also record your performance in realtime to create a new Style (Realtime Recording). See page 25. • ASSEMBLY Mixes the various parts (channels) from preset Styles or already created Styles to create a new Style. See page 28. • GROOVE Changes the rhythmic feel of your created Style. See page 30. • CHANNEL Edits data for each channel — quantizing, changing velocity, etc. See page 32. • PARAMETER Changes the settings related for Style File Format. See page 33. • EDIT Lets you enter notes one by one to create an original Style (Step Recording). See page 28. CVP-601 Reference Manual Realtime Recording In the BASIC Page, you can create a single Style by recording the individual channels one-by-one, using realtime recording. Realtime Recording Characteristics — Loop Recording and Overdub Recording • Loop Recording Style playback repeats the rhythm patterns of several measures in a “loop,” and Style recording is also done using loops. For example, if you start recording with a two-measure MAIN section, the two measures are repeatedly recorded. Notes that you record will play back from the next repetition (loop), letting you record while hearing previously recorded material. • Overdub Recording This method records new material to a channel already containing recorded data, without deleting the original data. In Style recording, the recorded data is not deleted, except when using functions such as Rhythm Clear (page 27) and Delete (page 26). For example, if you start recording with a two-measure MAIN section, the two measures are repeated many times. Notes that you record will play back from the next repetition, letting you overdub new material to the loop while hearing previously recorded material. When creating a Style based on an existing internal Style, overdub recording is applied only to the rhythm channels. For all other channels (except rhythm), you need to delete the original data before recording. When you want to create a Style based on an existing Style, select the desired Style to serve as the basis for recording/editing before calling up the Style Creator display. 2 Call up the operation display. [FUNCTION]  [F] DIGITAL REC MENU  [B] STYLE CREATOR The BASIC Page is shown. 3 If you want to create a new Style from scratch, press the [C] (NEW STYLE) button to delete all channel’s data. 4 Select the desired section (Intro, Main, Ending, etc.) for your new Style. First close the RECORD display by pressing the [EXIT] button. Then use the [3]/[4] buttons to select the section to be recorded. Styles – Playing Rhythm and Accompaniment – 1 3 5-2 4 5-1 NOTE To call up the RECORD display again, press the [F] (REC CH) button. NOTE You can specify the sections to be recorded by using the Section buttons on the panel. Refer to step 3 on page 28. NOTE You cannot select INTRO 4 and ENDING 4 sections directly via panel operations. CVP-601 Reference Manual 25 5 Use the [5]/[6] buttons to determine the length (number of measures) of the selected section, then press the [D] (EXECUTE) button to actually enter the specified length. 6 Specify the channel to be recorded by simultaneously holding down the [F] (REC CH) button and pressing the appropriate numbered button, [1] – [8]. To cancel the selection, press the corresponding [1] – [8] button again. 6 3 7 Styles – Playing Rhythm and Accompaniment – 7 Call up the Voice Selection display by using the [1] – [8] buttons and select the desired Voice for the corresponding recording channels. Press the [EXIT] button to close the Voice Selection display. Recordable Voices • RHY1 channel Any except your original Organ Flute and Super Articulation Voices are recordable. • RHY2 channel Only drum/SFX kits are recordable. • BASS–PHR2 channels Any except your original Organ Flute, drum/SFX kits and Super Articulation Voices are recordable. NOTE Preset Organ Flute Voices can be recorded to the RHY1 and BASS–PHR2 channels. 8 If necessary, delete a channel by simultaneously holding down the [J] (DELETE) button and pressing the appropriate numbered button, [1] – [8]. You can cancel the deletion by pressing the same numbered button again before releasing your finger from the [J] button. NOTE When recording channels BASS–PHR2 based on the existing Style, you have to delete the original data before recording. 26 CVP-601 Reference Manual 9 Start recording by pressing the STYLE [START/STOP] button. Playback of the specified section starts. Since the accompaniment pattern plays back repeatedly in a loop, you can record individual sounds one by one, listening to the previous sounds as they play. For information on recording to channels other than the rhythm channels (RHY1, 2), refer to the section “Rules when recording non-rhythm channels” below. NOTE You can turn off the desired channels by pressing the corresponding [1] – [8] buttons. Deleting recorded notes in the rhythm channel 3 10 To continue recording with another channel, repeat steps 6 – 9. 11 Stop recording by pressing the STYLE [START/STOP] button. 12 Press the [EXIT] button to close the RECORD display. 13 Press the [I] (SAVE) button to execute the Save operation. Styles – Playing Rhythm and Accompaniment – When you are recording the rhythm channel (RHY1 or RHY2), you can delete a specific instrument sound by simultaneously holding down the [E] (RHY CLEAR) button and pressing the appropriate key on the keyboard. NOTICE The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation. Rules when recording non-rhythm channels • Use only the CM7 scale tones when recording the BASS and PHRASE channels (i.e., C, D, E, G, A, and B). • Use only the chord tones when recording the CHORD and PAD channels (i.e., C, E, G, and B). C R C C R C C = Chord note C, R = Recommended note Using the data recorded here, the auto accompaniment (Style playback) is appropriately converted depending on the chord changes you make during your performance. The chord which forms the basis for this note conversion is called the Source Chord, and is set by default to CM7 (as in the example illustration above). You can change the Source Chord (its root and type) from the PARAMETER display on page 34. Keep in mind that when you change the Source Chord from the default CM7 to another chord, the chord notes and recommended notes will also change. For details on chord notes and recommended notes, see page 34. NOTE For the INTRO and ENDING sections, any desired chord or chord progression can be used. CVP-601 Reference Manual 27 Step Recording In the EDIT Page, you can record notes with absolutely precise timing. This Step Recording procedure is essentially the same as that for Song Recording (page 45) with the exception of the points listed below: • In the Song Creator, the End Mark position can be changed freely; in the Style Creator, it cannot be changed. This is because the length of the Style is automatically fixed, depending on the selected section. For example, if you create a Style based on a section of four measures length, the End Mark position is automatically set to the end of the fourth measure, and cannot be changed in the Step Recording display. • Recording channels can be changed in the Song Creator 1-16 tab display; however, they cannot be changed in the Style Creator. Select the recording channel in the BASIC tab display. • In the Style Creator, the channel data can be entered and System Exclusive data can be edited (delete, copy, or move). You can switch between the two by pressing the [F] button. However, Chord, Lyrics, and System Exclusive data cannot be entered. 3 Styles – Playing Rhythm and Accompaniment – For instructions on Step Recording, refer to pages 45 – 48. For information on the EDIT display (Event List display), refer to page 57. Style Assembly Style Assembly allows you to create a single Style by mixing the various patterns (channels) from existing internal Styles. 1 Select the desired Style to serve as the basis for recording/editing before calling up the Style Creator display. 2 Call up the operation display. [FUNCTION]  [F] DIGITAL REC MENU  [B] STYLE CREATOR  TAB [L][R] ASSEMBLY 3 Select the desired section (Intro, Main, Ending, etc.) for your new Style. First call up the SECTION Selection display by pressing one of the Section buttons (INTRO, MAIN, ENDING, etc.) on the panel. Then change the section as desired by using the [6]/[7] buttons and actually enter the selection by pressing the [8] (OK) button. NOTE You cannot select INTRO 4 and ENDING 4 sections directly via panel operations. 28 CVP-601 Reference Manual 4 Select the channel for which you wish to replace the pattern by using the [A] – [D] and [F] – [I] buttons. Call up the Style Selection display by pressing the same button again. Select the Style containing the pattern you want to replace in the Style Selection display. To return to the previous screen, press the [EXIT] button after selecting the Style. 4 [A] – [D], [F] – [I] buttons 3 6 5 Select the desired section of the newly imported Style (chosen in step 4) by using the [2]/[3] (SECTION) buttons. 6 Select the desired channel for the section (chosen in step 5) by using the [4]/ [5] (CHANNEL) buttons. Repeat steps 4 – 6 above to replace the patterns of other channels. Styles – Playing Rhythm and Accompaniment – 5 Playing the Style During Style Assembly While you are assembling a Style, you can play back the Style (to check the sound of your edits) and conveniently select the method of playback. Use the [6]/[7] (PLAY TYPE) buttons in the Style Assembly display to select the playback method. • SOLO Mutes all but the selected channel in the ASSEMBLY Page. Any channels set to ON in the RECORD display on the BASIC Page are played back simultaneously. • ON Plays back the selected channel in the ASSEMBLY Page. Any channels set to other than OFF in the RECORD display on the BASIC Page are played back simultaneously. • OFF Mutes the selected channel in the ASSEMBLY Page. 7 Press the [J] (SAVE) button to execute the Save operation. NOTICE The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation. CVP-601 Reference Manual 29 Editing the Rhythmic Feel 1 2 3 1 3 Styles – Playing Rhythm and Accompaniment – 1 In the GROOVE Page, use the [A]/[B] buttons to select the edit menu, then edit the data by using the [1] – [8] buttons. 1 GROOVE This lets you add swing to the music or change the “feel” of the beat by making subtle shifts in the timing (clock) of the Style. The Groove settings are applied to all channels of the selected Style. 30 [1]/ [2] ORIGINAL BEAT Specifies the beats to which Groove timing is to be applied. In other words, if “8 Beat” is selected, Groove timing is applied to the 8th notes; if “12 Beat” is selected, Groove timing is applied to 8th-note triplets. [3]/ [4] BEAT CONVERTER Actually changes the timing of the beats (specified in the ORIGINAL BEAT parameter above) to the selected value. For example, when ORIGINAL BEAT is set to “8 Beat” and BEAT CONVERTER is set to “12,” all 8th notes in the section are shifted to 8th-note triplet timing. The “16A” and “16B” Beat Converter which appear when ORIGINAL BEAT is set to “12 Beat” are variations on a basic 16th-note setting. [5]/ [6] SWING Produces a “swing” feel by shifting the timing of the back beats, depending on the ORIGINAL BEAT parameter above. For example, if the specified ORIGINAL BEAT value is “8 Beat”, the Swing parameter will selectively delay the 2nd, 4th, 6th, and 8th beats of each measure to create a swing feel. The settings “A” through “E” produce different degrees of swing, with “A” being the most subtle and “E” being the most pronounced. [7]/ [8] FINE Selects a variety of Groove “templates” to be applied to the selected section. The “PUSH” settings cause certain beats to be played early, while “HEAVY” settings delay the timing of certain beats. The numbered settings (2, 3, 4, 5) determine which beats are to be affected. All beats up to the specified beat — but not including the first beat — will be played early or delayed (for example, the 2nd and 3rd beats, if “3” is selected). In all cases, “A” types produce minimum effect, “B” types produce medium effect, and “C” types produce maximum effect. CVP-601 Reference Manual 2 DYNAMICS This changes the velocity/volume (or accent) of certain notes in the Style playback. The Dynamics settings are applied to each channel or all channels of the selected Style. CHANNEL Selects the desired channel (part) to which Dynamics is to be applied. [3]/ [4] ACCENT TYPE Determines the type of accent applied — in other words, which notes in the part(s) are emphasized with the Dynamics settings. [6] STRENGTH Determines how strongly the selected Accent Type (above) will be applied. The higher the value, the stronger the effect. [7] EXPAND/ COMP. Expands or compresses the range of velocity values. Values higher than 100% expand the dynamic range, while values lower than 100% compress it. [8] BOOST/CUT Boosts or cuts all velocity values in the selected section/channel. Values above 100% boost the overall velocity, while values below 100% reduce it. 2 Press the [D] (EXECUTE) button to actually enter the edits for each display. After the operation is completed, this button changes to “UNDO,” letting you restore the original data if you are not satisfied with the Groove or Dynamics results. The Undo function only has one level; only the previous operation can be undone. 3 Press the [I] (SAVE) button to execute the Save operation. 3 Styles – Playing Rhythm and Accompaniment – [1]/ [2] NOTICE The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation. CVP-601 Reference Manual 31 Editing Data for Each Channel 1 4 5 2 3 1 3 Styles – Playing Rhythm and Accompaniment – In the CHANNEL Page, use the [A]/[B] buttons to select the edit menu. 1 QUANTIZE Same as in the Song Creator (page 55), with the exception of the two additional available parameters below. Eighth notes with swing Sixteenth notes with swing 2 VELOCITY CHANGE Boosts or cuts the velocity of all notes in the specified channel, according to the percentage specified here. 3 BAR COPY This function allows data to be copied from one measure or group of measures to another location within the specified channel. [4] TOP [5] LAST [6] DEST Specifies the first (TOP) and last (LAST) measures in the region to be copied. Specifies the first measure of the destination location, to which the data is to be copied. 4 BAR CLEAR This function clears all data from the specified range of measures within the selected channel. 5 REMOVE EVENT This function lets you remove specific events from the selected channel. 2 Use the [1]/[2] (CHANNEL) buttons to select the channel to be edited. The selected channel is shown at the upper left of the display. 3 Use the [4] – [8] buttons to edit the data. 4 Press the [D] (EXECUTE) button to actually enter the edits for each display. After the operation is completed, this button changes to “UNDO,” letting you restore the original data if you are not satisfied with the results of the edit. The Undo function only has one level; only the previous operation can be undone. 5 Press the [I] (SAVE) button to execute the Save operation. NOTICE The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation. 32 CVP-601 Reference Manual Making Style File Format Settings The Style File Format (SFF) combines all of Yamaha’s auto accompaniment (Style playback) know-how into a single unified format. By using the Style Creator, you can take advantage of the power of the SFF format and freely create your own Styles. The chart shown below indicates the process by which the Style is played back. (This does not apply to the rhythm track.) These parameters can be set via the Style Creator feature, in the PARAMETER Page. Source Pattern settings — SOURCE (PLAY) ROOT/CHORD (page 34) The Style data is appropriately converted depending on chord changes you make during your performance. You can create the “Source Pattern” with the Style Creator, which determines how the played chord will be converted. Here the “Source Chord” (page 34) can be set, allowing you to record accompaniment channels. 3 Styles – Playing Rhythm and Accompaniment – Chord changes via the chord section of the keyboard. Note Transposition settings — NTR and NTT (page 35) This parameter group features two parameters that determine how the notes of the Source Pattern are to be converted in response to chord changes. Other settings — HIGH KEY, NOTE LIMIT and RTR (page 37) Using the parameters of this group, you can fine-tune how Style playback responds to the chords you play. For example, the Note Limit parameter allows you to have the Voices of the Style sound as realistic as possible by shifting the pitch to an authentic range — ensuring that no notes sound outside the natural range of the actual instrument (e.g., high bass sounds or low piccolo sounds). Output This instrument’s Styles are compatible with SFF GE — an enhanced format of the original SFF with especially rich, expressive guitar parts. NOTE The Style files created on this instrument can only be played back on instruments which are compatible with SFF GE. CVP-601 Reference Manual 33 1 In the PARAMETER Page, use the [A]/[B] buttons to select the edit menu. For details of the edit menu, see page 34. 1 4 2 3 3 Styles – Playing Rhythm and Accompaniment – 2 Use the [1]/[2] (CHANNEL) buttons to select the channel to be edited. The selected channel is shown at the upper left of the display. 3 Use the [3] – [8] buttons to edit the data. For details on editable parameters, see pages 34 – 37. 4 Press the [I] (SAVE) button to execute the Save operation. NOTICE The edited Style will be lost if you change to another Style or turn the power to the instrument off without executing the Save operation. 1 SOURCE (PLAY) ROOT/CHORD These settings determine the original key of the source pattern (i.e., the key used when recording the pattern). The default setting of CM7 (with a Source Root of “C” and a Chord Type of “M7”), is automatically selected whenever the preset data is deleted prior to recording a new Style, regardless of the Source Root and Chord included in the preset data. When you change Source Root/Chord from the default CM7 to another chord, the chord notes and recommended notes will also change, depending on the newly selected chord type. When the Source Root is C: CM 6 CMaj CM 7 ( ♯ 11) CM 7 C 7 (9) CM add9 C 6 (9) C C R C C R C R C C C R Cm Caug R C R Cm 7 (11) C R C C C C C R C 7 ♭5 C C C C C C C R C C C C C R C C R C R C C R R C C R C C C C 1+5 C C C R C C 7 sus4 C C R C C C C C C 7 ( ♯ 9) C 7 ( ♭ 13) C C C C C C R C C C C R C R C C R C 7 ( ♭ 9) C C C C R C C C Cm 7 (9) C7 C C R C R C Cm (9) C C 7 (13) C R C R Cdim 7 C C C R C C 1+8 C 7 aug R C C C C R C Cdim C 7 ( ♯ 11) C CM 7 aug C R C R C C 7 (9) C R C C C C C C Cm 7 ♭ 5 C R C C CmM 7 (9) R C C R C Cm 7 C C R C R C C R C CmM 7 C C R C Cm 6 C R C R C C R C C C C C R C C R C C C Csus 2 Csus 4 R C C C R C C C C C R C C C C R C R C = Chord notes C, R = Recommended notes NOTE When NTR is set to “Root Fixed,” NTT is set to “Bypass” and NTT BASS is set to “OFF,” the “Source Root” and “Source Chord” parameters are changed to “Play Root” and “Play Chord,” respectively. In this case, you can change chords and hear the resulting sound for all channels. NOTE SOURCE ROOT/CHORD is not applied when NTR is set to GUITAR. 34 CVP-601 Reference Manual 2 NTR/NTT [3]/ [4] NTR (Note Transposition Rule) Determines the relative position of the root note in the chord, when converted from the Source Pattern in response to chord changes. Refer to the list below. [5] – [7] NTT (Note Transposition Table) Sets the note transposition table for the source pattern. Refer to the list below. [8] NTT BASS ON/ OFF The channel for which this is set to ON will be played back by the bass root note, when the on-bass chord is recognized by the instrument. When NTR is set to GUITAR and this parameter is set to ON, only notes assigned to bass will be played back by the bass root note. NTR (Note Transposition Rule) ROOT FIXED GUITAR When the root note is transposed, the interval between notes is maintained. For example, the notes C3, E3 and G3 in the key of C become F3, A3 and C4 when they are transposed to F. Use this setting for channels that contain melody lines. The note is kept as close as possible to the previous note range. For example, the notes C3, E3 and G3 in the key of C become C3, F3 and A3 when they are transposed to F. Use this setting for channels that contain chord parts. 3 When playing a C major chord. When playing an F major chord. When playing a C major chord. When playing an F major chord. Styles – Playing Rhythm and Accompaniment – ROOT TRANS (Root Transpose) This is exclusively for transposing guitar accompaniment. Notes are transposed to approximate the chords played with natural guitar fingering. NTT (Note Transposition Table) When NTR is set to ROOT TRANS or ROOT FIXED BYPASS When NTR is set to ROOT FIXED, the transposition table used does not do any note conversion. When NTR is set to ROOT TRANS, the table used only converts the notes by maintaining the pitch relationship between notes. MELODY Suitable for melody line transposition. Use this for melody channels such as Phrase 1 and Phrase 2. CHORD Suitable for chordal parts transposition. Use this for the Chord 1 and Chord 2 channels, especially when they contain piano or guitar-like chordal parts. MELODIC MINOR When the played chord changes from a major to a minor chord, this table lowers the third interval in the scale by a semitone. When the chord changes from a minor to a major chord, the minor third interval is raised by a semitone. Other notes are not changed. Use this for melody channels of Sections which respond only to major/minor chords, such as Intros and Endings. MELODIC MINOR 5th In addition to the Melodic Minor transposition above, augmented and diminished chords affect the 5th intervals of the Source Pattern. CVP-601 Reference Manual 35 3 Styles – Playing Rhythm and Accompaniment – HARMONIC MINOR When the played chord changes from a major to a minor chord, this table lowers the third and sixth intervals in the scale by a semitone. When the chord changes from a minor to a major chord, the minor third and flatted sixth intervals are raised by a semitone. Other notes are not changed. Use this for chord channels of Sections which respond only to major/minor chords, such as Intros and Endings. HARMONIC MINOR 5th In addition to the Harmonic Minor transposition above, augmented and diminished chords affect the 5th note of the Source pattern. NATURAL MINOR When the played chord changes from a major to a minor chord, this table lowers the third, sixth and seventh intervals in the scale by a semitone. When the chord changes from a minor to a major chord, the minor third, flatted sixth and flatted seventh intervals are raised by a semitone. Other notes are not changed. Use this for chord channels of Sections which respond only to a Major/minor chord such as Intros and Endings. NATURAL MINOR 5th In addition to the Natural Minor transposition above, augmented and diminished chords affect the 5th note of the Source pattern. DORIAN When the played chord changes from a major to a minor chord, this table lowers the third and seventh intervals in the scale by a semitone. When the chord changes from a minor to a major chord, the minor third and flatted seventh intervals are raised by a semitone. Other notes are not changed. Use this for chord channels of Sections which respond only to a Major/minor chord such as Intros and Endings. DORIAN 5th In addition to the Dorian transposition above, augmented and diminished chords affect the 5th note of the Source pattern. When NTR is set to GUITAR 36 ALL-PURPOSE This table covers both strummed- and arpeggio-played sound. STROKE Suitable for stroke-played sound of the guitar. Some notes may sound as if it is muted — this is normal condition when the chord is played on guitar by stroke. ARPEGGIO Suitable for arpeggio-played sound of the guitar. Using this table, four notes arpeggio sounds most beautiful. CVP-601 Reference Manual 3 HIGH KEY / NOTE LIMIT [4]/ [5] HIGH KEY This sets the highest key (upper octave limit) of the note transposition for the chord root change. Any notes calculated to be higher than the highest key are transposed down to the next lowest octave. This setting is available only when the NTR parameter (page 35) is set to “Root Trans.” Example — When the highest key is F. NOTE LIMIT LOW [7] NOTE LIMIT HIGH CM Notes played C3-E3-G3 C♯ M ♯ C 3-E ♯ 3-G ♯ 3 FM F3-A3-C4 F♯ M ♯ F 2-A ♯ 2-C ♯ 3 These set the note range (highest and lowest notes) for Voices recorded to the Style channels. By judicious setting of this range, you can ensure that the Voices sound as realistic as possible — in other words, that no notes outside the natural range are sounded (e.g., high bass sounds or low piccolo sounds). 3 Styles – Playing Rhythm and Accompaniment – [6] Root changes Example — When the lowest note is C3 and the highest is D4. Root changes CM Notes played E3-G3-C4 C♯ M ♯ E 3-G ♯ 3-C ♯ 4 FM F3-A3-C4 High Limit Low Limit 4 RTR (Retrigger Rule) These settings determine whether notes stop sounding or not and how they change pitch in response to chord changes. STOP The notes stop sounding. PITCH SHIFT The pitch of the note will bend without a new attack to match the type of the new chord. PITCH SHIFT TO ROOT The pitch of the note will bend without a new attack to match the root of the new chord. RETRIGGER The note is retriggered with a new attack at a new pitch corresponding to the next chord. RETRIGGER TO ROOT The note is retriggered with a new attack at the root note of the next chord. However, the octave of the new note remains the same. CVP-601 Reference Manual 37 Song Playback – Playing and Practice Songs – Contents Editing Music Notation Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Using the Auto Accompaniment Features with Song Playback . . . . . . . . . . . . . . . . . . . . . . . . . 40 Song Playback Related Parameters (Repeat settings, Channel settings, Guide Function) . . .41 • Keyboard Practice Using the Guide Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 • Playing Backing Parts with the Performance assistant Technology. . . . . . . . . . . . . . . . . . . . . . . . 44 4 Editing Music Notation Settings Song Playback – Playing and Practice Songs – To view the music notation of the selected Song, press the [SCORE] button. You can change the notation display as desired to suit your personal preferences. The settings here are maintained even when the power is turned off. NOTE You can save the setting here as a part of a Song by accessing [FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR  TAB [L][R] CHANNEL  [A]/[B] SETUP. See page 56. 38 [1] LEFT ON/ OFF Enables/disables display of the left-hand key range. Depending on other settings, this parameter may be unavailable and may appear grayed out. If this is the case, go to the detailed setting display (on page 39) and set the LEFT CH. parameter to any channel except “AUTO.” Or, go to the display [FUNCTION]  [B] SONG SETTING and set the TRACK 2 parameter to any channel except “OFF” (page 41). RIGHT (next parameter) and LEFT cannot be turned off at the same time. [2] RIGHT ON/ OFF Enables/disables display of the right-hand key range. RIGHT and LEFT (above) cannot be turned off at the same time. [3] CHORD ON/OFF Enables/disables display of the chords. If the selected Song does not contain chord data, chords are not displayed. [4] LYRICS ON/OFF Enables/disables display of the lyrics. If the selected Song does not contain lyric data, lyrics are not displayed. When the Song contains Pedal events, pressing these buttons can display the Pedal events, instead of displaying Lyrics. CVP-601 Reference Manual [5] NOTE ON/ OFF Enables/disables display of the note name (pitch). The note name is indicated at the left of the note. When the space between the notes is too small, the indication may be moved to the top left of the note. When the Song contains Fingering events, pressing these buttons can display the fingering, instead of displaying note names. [7] SIZE Determines the display resolution (or zoom level) of the notation. [8] SET UP See below. Pressing the [8] (SET UP) button calls up the detailed setting display. You can set the view type by using the [1] – [6] buttons, then press the [8] (OK) button. [1] LEFT CH [2] RIGHT CH Song Playback – Playing and Practice Songs – 4 Determines which MIDI channel in the Song data is used for the left-hand/righthand part. This setting returns to AUTO when a different Song is selected. AUTO The MIDI channels in the Song data for the right- and left-hand parts are assigned automatically — setting the parts to the same channel as the channel which is specified in [FUNCTION]  [B] SONG SETTING (page 41). 1 – 16 Assigns the specified MIDI channel (1 – 16) to the respective left- or right-hand parts. OFF (LEFT CH only) No channel assignment. This disables display of the left-hand key range. [3]/ [4] KEY SIGNATURE This lets you enter key signature changes in the middle of a Song, at the stopped position. This menu is useful when the selected Song contains no key signature settings for displaying notation. [5] QUANTIZE This gives you control over the note resolution in the notation, letting you shift or correct the timing of all displayed notes so that they line up to a particular note value. Make sure to select the smallest note value used in the Song. [6] NOTE NAME Selects the type of the note name indicated at the left of the note in the notation from among the following three types. The settings here are available when the NOTE ON/OFF parameter above is set to ON. A, B, C Note names are indicated as letters (C, D, E, F, G, A, B). Fixed DO Note names are indicated in solfeggio and differ depending on the selected language. Movable DO Note names are indicated in solfeggio according to the scale intervals, and as such are relative to the key. The root note is indicated as Do. For example, in the key of G major the root note of “Sol” would be indicated as “Do.” As with “Fixed Do,” the indication differs depending on the selected language. CVP-601 Reference Manual 39 Using the Auto Accompaniment Features with Song Playback When playing back a Song and a Style at the same time, channels 9-16 in the Song data are replaced with Style channels – allowing you to play the accompaniment parts of the Song yourself. Try playing chords along with the Song playback as shown in the instructions below. When playing back a Song and a Style at the same time, we recommend that you use the Preset Songs in the “Sing-a-long” folder. 1 Select a Song. 2 Select a Style. 3 Press the STYLE [ACMP ON/OFF] button to turn on the Auto Accompaniment function. 4 Press the STYLE [SYNC START] button to enable standby — letting you simultaneously start the accompaniment as soon as you start playing. 5 While holding down the SONG [STOP] button, press the [PLAY/PAUSE] button to enable synchronized start for the Song. 6 Press the STYLE [START/STOP] button or play chords with your left hand. The Song and Style starts playing. When you play chords, pressing the [SCORE] button and turning CHORD on (page 38) allows you to see the chord information. 4 Song Playback – Playing and Practice Songs – NOTE When playing back a Song and a Style at the same time, the tempo value set in the Song is automatically used. When Song playback is stopped, the Style playback is also stopped at the same time. 40 CVP-601 Reference Manual Song Playback Related Parameters (Repeat settings, Channel settings, Guide Function) The instrument has a variety of Song playback functions — repeat playback, various guide settings, etc. — which can be accessed in the display below. Call up the operation display. [FUNCTION]  [B] SONG SETTING [A]/[B] GUIDE MODE [C] GUIDE LAMP [D] GUIDE LAMP TIMING [H] REPEAT MODE Song Playback – Playing and Practice Songs – 4 See page 42. Determines the method of repeat playback. OFF Plays through the selected Song, then stops. SINGLE Plays through the selected Song repeatedly. ALL Continues playback through all the Songs in the specified folder repeatedly. RANDOM Continues playback at random through all the Songs in the specified folder repeatedly. NOTE The preset Songs in the “Follow Lights” folder contain the Guide settings. These Songs are inap- propriate for use with ALL or RANDOM repeat. [I] PHRASE MARK REPEAT Phrase Mark is a pre-programmed part of some Song data, which specifies a certain location (set of measures) in the Song. When this is on, the section corresponding to the specified Phrase Mark number is repeatedly played back. [1] TRACK 2 [2] TRACK 1 These parameters determine which MIDI channel in the Song data is assigned to the Left- or Right-hand part of the Guide function and the Song Score function. CVP-601 Reference Manual 41 [3] AUTO CH SET When set to “ON,” this automatically sets the proper MIDI channels for the Right- and Left hand parts pre-programmed in the commercially available Song data. Normally, this should be set to “ON.” [5]/ [6] LYRICS LANGUAGE Determines the language of the displayed lyrics. AUTO When the language is specified in the Song data, the lyrics are displayed accordingly. When the language is not specified in the Song data, the lyrics language is regarded as INTERNATIONAL below. INTERNATIONAL Handles the displayed lyrics as a western language. JAPANESE Handles the displayed lyrics as Japanese. [7] QUICK START On some commercially available Song data, certain settings related to the Song (such as Voice selection, volume, etc.) are recorded to the first measure, before the actual note data. When Quick Start is set to “ON,” the instrument reads all initial non-note data of the Song at the highest possible speed, then automatically switches to the appropriate tempo at the first note. This allows you to start playback as quickly as possible, with a minimum pause for reading of data. [8] P.A.T. (Performance assistant) See page 44. 4 Song Playback – Playing and Practice Songs – Keyboard Practice Using the Guide Function The keyboard guide lamps indicate the notes (location and timing) for you to play. 42 1 Select the desired Song for practicing the keyboard or singing. 2 Call up the setting display. [FUNCTION]  [B] SONG SETTING 3 Use the [A]/[B] buttons to select the desired Guide function type. CVP-601 Reference Manual Guide menu for keyboard practice • Follow Lights With this function, the keyboard guide lamps indicate which notes you should play. Song playback pauses and waits for you to play. When you play the correct notes, Song playback continues. • Any Key With this function, you can play the melody of a Song just by pressing a single key (any key is OK) in time with the rhythm. Song playback pauses and waits for you to play any key. Simply play a key on the keyboard in time with the music and Song playback continues. • Your Tempo The same as Follow Lights, except that Song playback matches the speed at which you play. Guide menu for singing • Karao-Key This function lets you control the Song playback timing with just one finger, while you sing along. This is useful for singing to your own performance. Song playback pauses, waiting for you to sing. Simply play a key on the keyboard (any key is fine) and Song playback continues. Turn the [GUIDE] button on. 5 Call up the Score display by pressing the [SCORE] button. 6 Press the SONG [PLAY/PAUSE] button to start playback. Practice playing the keyboard or singing, along with the Guide type selected in step 3. Song Playback – Playing and Practice Songs – 4 4 NOTE The guide lamps light according to Song channels recorded to Track 1 and 2 and the chord data in the Song (when such data is included). If the guide lamps do not light as intended, you may need to assign the appropriate right- and left-hand channels to Track 1 and 2 respectively (page 41). 7 Press the SONG [STOP] button to stop playback. Determining the timing by which the keyboard guide lamps light (GUIDE LAMP TIMING) Press the [D] button in the SONG SETTING display in step 3 to select the timing by which the keyboard guide lamps light. • JUST The guide lamps light in time with the music, at the same timing you should play. • NEXT The guide lamps light slightly ahead of the music, indicating the notes you should play next. The guide lamps flash if you fail to play the keys with the correct timing. NOTE If you want to turn the guide lamps off, press the [C] (GUIDE LAMP) button in the SONG SETTING display (in step 3 as described above). NOTE You can save the Guide settings as a part of the Song data (page 56). For Songs to which the Guide settings have been saved, the Guide function will be automatically turned on and the related settings will be recalled when the Song is selected. CVP-601 Reference Manual 43 Playing Backing Parts with the Performance assistant Technology This feature lets you play your own backing parts on the keyboard along with Song playback, and have them sound perfectly appropriate (even though you might be playing wrong notes). 4 Select a Song containing chord data. The Performance assistant technology applies only to Songs containg chord data. To confirm whether the selected Song contains chord data or not, return to the Main display then start playback. If the current Song contains chord data, the Main display shows the current chord type. After stopping playback, go to the next step. 2 Call up the operation display. [FUNCTION]  [B] SONG SETTING 3 Press the [8] button to turn the P.A.T. (performance assistant technology) on. 4 Press the SONG [PLAY/PAUSE] button to start playback. 5 Play the keyboard. Along with Song playback, try playing the bass line with the left hand area while playing various phrases or chords with the right hand area. Even if you do not know what notes should be played, don’t worry and play any keys as desired! Only the harmonically “correct” notes matching the current chord are sounded, regardless of the notes you actually play. Song Playback – Playing and Practice Songs – 1 Current chord 6 Press the SONG [STOP] button to stop playback. 7 Press the [8] button to turn the P.A.T. off. NOTE Selecting another Song may reset P.A.T. to OFF. 44 CVP-601 Reference Manual Song Recording via MIDI – Recording Your Performance via MIDI – Contents Creating/Editing Songs (Song Creator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 • Recording Melodies (Step Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Recording Chords (Step Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Re-Recording a Specific Section — Punch In/Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Editing Channel Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Editing Chord Events, Notes, System Exclusive Events and Lyrics . . . . . . . . . . . . . . . . . . . . . . . 45 49 52 54 57 Creating/Editing Songs (Song Creator) 5 Song Recording via MIDI – Recording Your Performance via MIDI – To create a Song, you can compose your performance by entering it one event at a time (called “Step Recording”), as well as recording your performance in real time (described in the Owner’s Manual). This section explains operations of Step Recording and re-recording or editing existing Song data. Call up the operation display. [FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR There are six Pages (tabs) in the Song Creator display. • REC MODE For re-recording the Song. See page 52. • CHANNEL For editing the Channel events. See page 54. • CHORD For recording the Chords and Sections with timing (page 49) or edits them (page 58). • 1-16 For recording the melodies (Step Recording; see below) or edits the recorded melodies (page 58). • SYS/EX. For editing the System Exclusive events (tempo, time signature, etc.). See page 58. • LYRICS For inputting/editing the Song name and lyrics. See page 58. Recording Melodies (Step Recording) 1 Press the SONG [REC] and SONG [STOP] buttons simultaneously. A blank Song (“New Song”) is called up for recording. NOTE Selecting a blank Song initializes the panel settings. CVP-601 Reference Manual 45 2 Call up the operation display. [FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR  TAB [L][R] 1-16 3 4 3 Press the [F] button to select the channel for recording. 4 Press the [G] (STEP REC) button to call up the STEP RECORD display. 5 Start Step Recording by using the [A] – [J] buttons and [1] – [8] buttons. Refer to the example on page 47 for specific instructions. 5 Song Recording via MIDI – Recording Your Performance via MIDI – When a note is input, the location (bar: beat: clock), note name, velocity and length are shown as a list. [A]/[B]/[C] Moves the cursor in the list. [G] Determines the velocity (loudness) of the note to be entered. The velocity value can be specified within a range from 1 to 127. The higher the velocity value, the louder the sound becomes. Kbd.Vel: Actual resulting velocity fff: 127 ff: 111 f: 95 mf: 79 mp: 63 p: 47 pp: 31 ppp:15 [H] Determines the gate time (note length) of the note to be entered. Normal: 80% Tenuto: 99% Staccato: 40% Staccatissimo: 20% Manual: The gate time can be set to any desired percentage by using the [DATA ENTRY] dial. 46 CVP-601 Reference Manual [I] Determines the note type to be entered: normal, dotted or triplet. [J] DEL. Deletes the selected data. [1] BAR Sets the position of the note to be entered. [2] BEAT [3] CLK [4] – [8] Determines the note length to be entered: whole-note, half-note, quarter-note, eighth-note or sixteenth-note. Example of Step Recording — Melodies 1 2 3 4 * The numbers shown in the illustration correspond to the following operation step numbers. Song Recording via MIDI – Recording Your Performance via MIDI – 5 In this example, keep in mind that one of the steps involves holding down a key on the keyboard while executing the operation. Select the Voice for recording after calling up the Step Recording display. NOTE Since the music score displayed on the instrument is generated from the recorded MIDI data, it may not appear exactly the same as shown here. 1 Enter the first and second notes with a slur. 1-1 1-2 1-3 1-4 1-5 Press the [G] button to select “f.” Press the [H] button to select “Tenuto.” Press the [I] button to select the “dotted” note type. Select the dotted quarter-note by using the [6] buttons. Play the C3 key. The first note is entered. 1-6 Press the [I] button to select the “normal” note type. 1-7 Press the [7] button to select the eight-note length. 1-8 Play the D3 key. The second note is entered. 2 Enter the next notes and apply staccato. 2-1 Press the [H] button to select “Staccato.” 2-2 Press the [6] button to select the quarter-note length. 2-3 Play the keys E3 and F3 in order. The first measure has been completed. CVP-601 Reference Manual 47 3 To enter a quarter-note rest, press the [6] button again. To enter the rest, use the [4] – [8] buttons. (Press the button once to select the rest value, and once again to actually enter it.) A rest having the specified note length will be entered. 4 Enter the next notes and apply a tie. 4-1 Press the [G] button to select “mp.” 4-2 Press the [H] button to select “Normal.” 4-3 While holding G3 key on the keyboard, press the [6] button. Do not release the G3 key yet. Keep holding it while executing the following steps. 4-4 While holding the G3 key, press the C4 key. Do not release the G3 and C4 keys yet. Keep holding the notes while executing the following step. 4-5 While holding the keys G3 and C4, press the [5] button. 5 After pressing the button, release the keys. Song Recording via MIDI – Recording Your Performance via MIDI – 5 Press the SONG [STOP] button (or press the [C] button) to return to the top of the Song, then hear the newly entered Song by pressing the [PLAY/PAUSE] button. 6 Press the [EXIT] button to exit from the Step Recording display. 7 Press the [I] (SAVE) button to execute the Save operation. NOTICE The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save operation. 48 CVP-601 Reference Manual Recording Chords (Step Recording) You can record Chords and Sections (Intro, Main, Ending, and so on) one at a time with precise timing. These instructions show how to record chord changes using the Step Record function. 1 Press the SONG [REC] and SONG [STOP] buttons simultaneously. A blank Song (“New Song”) is called up for recording. NOTE Selecting a blank Song initializes the panel settings. Select the Style you want to use in the Song. 3 Call up the operation display. [FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR  TAB [L][R] CHORD 4 Press the [G] (STEP REC) button to call up the STEP RECORD display. 5 Start Step Recording. 5 Song Recording via MIDI – Recording Your Performance via MIDI – 2 For information on these buttons, refer to page 46. CVP-601 Reference Manual 49 Example of Step Recording — Chords NOTE This example uses a Style in 4/4 time. C 1 2 3 MAIN A BREAK MAIN B F G F G7 * The numbers shown in the illustration correspond to the respective operation step numbers below. C Before starting, make sure the [AUTO FILL IN] button is set to off. 1 Enter the chords for the Main A section. 1-1 Press the STYLE [MAIN A] button. 1-2 Press the [5] button to select the half-note length. 1-3 Play the chord C, F and G in the chord section of the keyboard. 5 Song Recording via MIDI – Recording Your Performance via MIDI – C F G 1-1 1-2 1-3 2 Enter the chords for the Break section. 2-1 Press the STYLE [BREAK] button. 2-2 Press the [6] button to select the quarter-note length. 2-3 Play the chords F and G7 in the chord section of the keyboard. F G7 2-1 2-2 2-3 NOTE To enter fill-ins, turn the [AUTO FILL IN] button to ON, and simply press the desired MAIN VARIATION [A] – [D] button. 50 CVP-601 Reference Manual 3 Enter the chords for the Main B section. 3-1 Press the STYLE [MAIN B] button. 3-2 Press the [4] button to select the whole-note length. 3-3 Play the chord C in the chord section of the keyboard. C 3-1 4 3-2 3-3 Press the SONG [STOP] button (or press the [C] button) to return to the top of the Song, then hear the newly entered Song by pressing the [PLAY/PAUSE] button. 5 Press the [EXIT] button to exit from the Step Recording display. 6 Press the [F] (EXPAND) button to convert the input chord change data into the Song data. 7 Press the [I] (SAVE) button to execute the Save operation. Song Recording via MIDI – Recording Your Performance via MIDI – 5 NOTICE The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save operation. CVP-601 Reference Manual 51 Re-Recording a Specific Section — Punch In/Out When re-recording a specific section of an already-recorded Song, use the Punch IN/OUT function. In this method, only the data between the Punch In point and the Punch Out point is overwritten with the newly recorded data. Keep in mind that the notes before and after the Punch In/Out points are not recorded over, although you will hear them play back normally to guide you in the Punch In/Out timing. 1 Select the Song you want to re-record. 2 Call up the operation display. [FUNCTION]  [F] DIGITAL REC MENU  [A] SONG CREATOR  TAB [L][R] REC MODE 3 Determine the settings for recording. 5 Song Recording via MIDI – Recording Your Performance via MIDI – [1] – [3] REC START (Punch In) Determines the Punch In timing. NORMAL Overwrite recording starts when pressing the SONG [PLAY/PAUSE] button or when you play the keyboard in the Synchro Standby mode. FIRST KEY ON The Song plays back normally, then starts overwrite recording as soon as you play the keyboard. PUNCH IN AT The Song plays back normally up to the beginning of the indicated Punch In measure, then starts overwrite recording at that point. You can set the Punch In measure by pressing the [3] button. [4] – [6] REC END (Punch Out) Determines the Punch Out timing. REPLACE ALL This deletes all data after the point at which recording is stopped. PUNCH OUT The Song position at which recording is stopped is regarded as the Punch Out point. This setting maintains all data after the point at which recording is stopped. PUNCH OUT AT Actual overwrite recording continues until the beginning of the specified Punch Out measure (set with the corresponding display button), at which point recording stops and normal playback continues. This setting maintains all data after the point at which recording is stopped. You can set the Punch Out measure by pressing the [6] buttons. 52 CVP-601 Reference Manual [7]/ [8] PEDAL PUNCH IN/OUT When this is set to ON, you can use the center pedal to control the Punch In and Punch Out points. While a Song is playing back, pressing (and holding) the center pedal instantly enables Punch In recording, while releasing the pedal stops recording (Punch Out). You can press and release the center pedal as often as you want during playback to punch in/out of overwrite recording. Note that the current function assignment of the center pedal is cancelled when the Pedal Punch In/Out function is set to ON. NOTE Pedal Punch In/Out operation may be reversed depending on the particular pedal you’ve con- nected to the instrument. If necessary, change the pedal polarity to reverse the control (page 79). While holding the SONG [REC] button, press the desired track button. 5 Press the SONG [PLAY/PAUSE] button to start Punch In/Out recording. Play the keyboard at the Punch In point and stop recording at the Punch Out point. 6 Press the [I] (SAVE) button to execute the Save operation. 5 Song Recording via MIDI – Recording Your Performance via MIDI – 4 NOTICE The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save operation.  Examples of re-recording with various Punch In/Out settings This instrument features several different ways you use the Punch In/Out function. The illustrations below indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded. REC START setting REC END setting Original data 1 2 3 4 Start overwrite recording *1 NORMAL REPLACE ALL 1 NORMAL PUNCH OUT AT 006 1 2 3 4 1 FIRST KEY ON REPLACE ALL FIRST KEY ON PUNCH OUT FIRST KEY ON PUNCH OUT AT 006 PUNCH IN AT 003 REPLACE ALL Play back original data 1 Play back original data 4 1 Play back original data 1 1 1 8 5 *1 To avoid overwriting measures 1 – 2, start recording from measure 3. *2 To stop recording, press the [REC] button at the end of measure 5. Deleted 5 6 7 8 7 8 Stop overwrite recording/ play original data 2 3 4 2 3 2 3 2 3 4 3 3 4 3 Deleted 5 6 7 8 5 6 7 8 Stop recording *2 4 5 Deleted Stop recording *2 4 5 6 7 8 Stop overwrite recording/ play original data Start overwrite recording 2 5 Stop overwrite recording/ play original data Start overwrite recording 2 6 Stop recording *2 4 Start overwrite recording 2 5 Stop recording *2 Play the keyboard to start overwrite recording Play back original data PUNCH IN AT 003 PUNCH OUT AT 006 3 Play the keyboard to start overwrite recording Play back original data PUNCH IN AT 003 PUNCH OUT 2 Play the keyboard to start overwrite recording 1 7 Stop recording *2 Start overwrite recording *1 Play back original data 6 Stop recording *2 Start overwrite recording *1 NORMAL PUNCH OUT 5 4 5 6 7 8 Previously recorded data Newly recorded data Deleted data CVP-601 Reference Manual 53 Editing Channel Events 1 3 2 1 5 Song Recording via MIDI – Recording Your Performance via MIDI – 1 In the CHANNEL Page, use the [A]/[B] buttons to select the edit menu, then edit the data by using the [1] – [8] buttons. For details of the edit menu and available settings, see page 55. 2 Press the [D] (EXECUTE) button to execute the operation for the current display. After the operation (with the exception of the SETUP menu) is completed, this button changes to “UNDO,” letting you restore the original data if you are not satisfied with the operation results. The Undo function only has one level; only the previous operation can be undone. 3 Press the [I] (SAVE) button to execute the Save operation. NOTICE The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save operation. 54 CVP-601 Reference Manual 1 QUANTIZE The Quantize function allows you to align the timing of all the notes in a channel. For example, if you record the musical phrase shown at right, you may not play it with absolute precision, and your performance may have been slightly ahead of or behind the precise timing. Quantize is a convenient way to correct for this. [2]/ [3] CHANNEL Determines which MIDI channel in the Song data is to be quantized. [4] – [6] SIZE Selects the quantize size (resolution). For optimum results, you should set the Quantize size to the shortest note value in the channel. For example, if eighth notes are the shortest in the channel, you should use 1/8 note as the Quantize size. 5 After 1/8 note quantization 1/4 note 1/8 note 1/16 note 1/32 note 1/16 note+ 1/8 note triplet* 1/4 note triplet 1/8 note triplet 1/16 note triplet 1/8 note+ 1/8 note triplet* 1/16 note+ 1/16 note triplet* Song Recording via MIDI – Recording Your Performance via MIDI – Settings: The three Quantize settings marked with asterisks (*) are exceptionally convenient, since they allow you to quantize two different note values at the same time. For example, when the straight eighth notes and eighth notes triplet are contained in the same channel, if you quantize by the straight eighth notes, all notes in the channel are quantized to straight eighth notes — completely eliminating any triplet feel. However, if you use the eighth note + eighth note triplet setting, both the straight and triplet notes will be quantized correctly. [7]/ [8] STRENGTH Determines how strongly the notes will be quantized. A setting of 100% produces exact timing. If a value less than 100% is selected, notes will be moved toward the specified quantization beats according to the specified percentage. Applying less than 100% quantization lets you preserve some of the “human” feel in the recording. Quarter-note length Original data (assuming 4/4 meter) Quantizing strength = 100 Quantizing strength = 50 2 DELETE You can delete the data of the specified channel in the Song. Select the channel whose data to be deleted by using the [1] – [8] buttons, then press the [D] (EXECUTE) button to execute the operation. CVP-601 Reference Manual 55 3 MIX This function lets you mix the data of two channels and place the results in a different channel. It also lets you copy the data from one channel to another. [2]/ [3] SOURCE 1 Determines the MIDI channel (1 – 16) to be mixed. All MIDI events of the channel specified here are copied to the destination channel. [4]/ [5] SOURCE 2 Determines the MIDI channel (1 – 16) to be mixed. Only note events of the channel specified here are copied to the destination channel. Besides the values 1 – 16, there is a “COPY” setting that allows you to copy the data from Source 1 to the destination channel. [6]/ [7] DESTINATION Determines the channel into which the mix or copy results will be placed. 4 CHANNEL TRANSPOSE This allows you to transpose the recorded data of individual channels up or down by a maximum of two octaves in semitone increments. NOTE Make sure not to transpose channels 9 and 10. In general, Drum kits are assigned to these channels. If you transpose the channels of Drum kits, the instruments assigned to each key will be changed. 5 Song Recording via MIDI – Recording Your Performance via MIDI – [F] CH 1–8/CH 9–16 Toggles between the two channel displays: Channels 1–8, and Channels 9–16. [G] ALL CH To simultaneously set all channels to the same value, adjust the Channel Transpose for one of the channels while holding down this button. 5 SETUP The current settings of the Mixing Console display and other panel settings can be recorded to the top position of the Song as the Setup data. The Mixing Console and panel settings recorded here are automatically recalled when the Song starts. NOTE Before executing the Setup operation, move the Song position to the top of the Song by pressing the SONG [STOP] button. [1] – [7] SELECT Determines which playback features and functions will be automatically called up along with the selected Song. The items selected here can be recorded only to the top position of the Song, except for the KEYBOARD VOICE. SONG Records the tempo setting and all settings made from the Mixing Console. KEYBOARD VOICE Records the panel settings, including the Voice selection of the keyboard parts (RIGHT 1, 2, and LEFT) and their on/off status. Panel settings recorded here are same as the ones memorized to the One Touch Setting. This can be recorded at any point in a Song. SCORE SETTING Records the settings in the Score display. GUIDE SETTING Records the settings of the Guide functions including the Guide ON/ OFF setting. LYRICS SETTING Records the settings in the Lyrics display. 56 [8] MARK ON [8] MARK OFF CVP-601 Reference Manual For adding or removing checkmarks to/from the selected item. Checked items are recorded to the Song. Editing Chord Events, Notes, System Exclusive Events and Lyrics You can edit chord events, note events, System Exclusive events and lyrics in the same manner on the corresponding display: CHORD, 1-16, SYS/EX and LYRICS. These displays are called “Event List display” because some events are shown in a list view. Event List display Indicates the location (position) of the corresponding event. Indicates the event value. Indicates the event type. See page 58. Moves the cursor up/down and select the desired event. [C] Moves the cursor to the top (beginning of the Song). [D]/[E] Moves the cursor left/right and select the desired parameter of the highlighted event. [H] FILTER Calls up the Filter display (page 59), letting you select only the events you wish to be shown in the event list. [I] SAVE Press to save the edited Song. [J] MULTI SEL. Holding this button while using the [A]/[B] buttons lets you select multiple events. [1] BAR Determines the position (bar/beat/clock) of the data. One clock is equal to 1/1920th of a quarter note. [2] BEAT [3] CLK [4]/ [5] DATA ENTRY Adjusts the event value. For coarse adjustment, use the [4] buttons. For fine adjustment, use the [5] buttons or [DATA ENTRY] dial. [6] CUT Executes the cut/copy/delete/paste operation. [7] COPY [7] DELETE [8] PASTE [6] INS (INSERT) Adds a new event. [8] CANCEL Cancels editing and restores the original value. 5 Song Recording via MIDI – Recording Your Performance via MIDI – [A]/[B] NOTE After you edit events in the CHORD tab display, press the [F] (EXPAND) button to convert the data into Song data. NOTE Chord section data recorded with Realtime Recording cannot be indicated and edited on this display. CVP-601 Reference Manual 57  Chord Events (CHORD Page) Style Style Tempo Tempo Chord Chord root, Chord type, On Bass Chord Sect Style Section (Intro, Main, Fill In, Break, Ending) OnOff On/off status for each part (channel) of the Accompaniment Style CH.Vol Volume for each part (channel) of the Accompaniment Style S.Vol Overall volume of the Accompaniment Style  Note Events (1-16 Page) 5 Song Recording via MIDI – Recording Your Performance via MIDI – Note An individual note within a Song. Includes the note number which corresponds to the key which was played, plus a velocity value based on how hard the key is played, and the gate time value (the length of a note). Ctrl (Control Change) Settings to control the Voice, such as volume, pan, filter and effect depth (edited via the Mixing Console described in chapter 9), etc. Prog (Program Change) MIDI program change number for selecting a Voice. P.Bnd (Pitch Bend) Data for changing the pitch of a Voice continuously. A.T. (Aftertouch) This event is generated when pressure is applied to a key after the note is played.  System Exclusive Events (SYS/EX. Page) ScBar (Score Start Bar) Determines the top measure of a Song. Tempo Determines the tempo value. Time (Time signature) Determines the time signature. Key (Key signature) Determines the key signature, as well as the major/minor setting, for the music score shown on the display. XGPrm (XG parameters) Allows you to make various detailed changes to the XG parameters. Refer to the “MIDI Data Format” in the MIDI Reference downloadable from the Yamaha Manual Library. SYS/EX. (System Exclusive) Displays the System Exclusive data in the Song. Keep in mind that you cannot create new data or change the contents of the data here; however, you can delete, cut, copy, and paste the data. Meta (Meta event) Displays the SMF meta events in the Song. Keep in mind that you cannot create new data or change the contents of the data here; however, you can delete, cut, copy, and paste the data.  Lyrics Events (LYRICS Page) 58 Name Allows you to enter the Song name. Lyrics Allows you to enter lyrics. Code CR: Enters a line break in the lyrics text. LF: Clears the currently displayed lyrics and displays the next set of lyrics. CVP-601 Reference Manual Displaying Specific Types of Events In the Event List displays, various types of events are shown. It may sometimes be difficult to pinpoint the ones you want to edit. This is where the Filter function comes in handy. It lets you determine which event types will be shown in the Event List displays. 1 2 Press the [H] (FILTER) button in the CHORD, 1-16, SYS/EX. or LYRICS displays. Checkmark the desired item to be displayed. [C] MAIN Displays all main types of events. [D] CTRL. CHG Displays all specific Control Change message events. [E] STYLE Displays all types of Style playback related events. [H] ALL ON Checkmarks all event types. [I] NOTE/ALL OFF/ CHORD “NOTE” or “CHORD” selects only NOTE/CHORD data. “ALL OFF” removes all checkmarks. [J] INVERT Reverses the checkmark settings for all boxes. In other words, this enters checkmarks to all boxes that were previously unchecked and vice versa. [2] – [5] 3 Song Recording via MIDI – Recording Your Performance via MIDI – 5 Selects an event type to be checked or unchecked. [6]/ [7] MARK ON [6]/ [7] MARK OFF Enters/removes the checkmark for the selected event type. The checked event types can be shown on the CHORD, 116, SYS/EX or LYRICS Page. Press the [EXIT] button to execute the settings. CVP-601 Reference Manual 59 USB Audio – Playback and Recording Audio Files – This function is fully explained in the Owner’s Manual. Refer to the corresponding chapter in the Owner’s Manual. Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song – Contents Registering a Song, Audio or Style File (SONG/AUDIO/STYLE) . . . . . . . . . . . . . . . . . . . . . . . . . 60 6 • Recalling the registered data from Music Finder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Creating a Set of Favorite Records. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Editing Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 7 Saving the Record as a Single File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 • Calling Up Music Finder Records Saved to USER or USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song – Registering a Song, Audio or Style File (SONG/AUDIO/STYLE) By registering a Song, Audio or Style file in various locations (Preset, User and USB) into Music Finder, you can conveniently and easily call up the file from the Song title. NOTE If you want to register files in the USB flash memory, connect the USB flash memory containing the data to the [USB TO DEVICE] terminal. 1 On the corresponding File Selection display, select a Song, Audio or Style File to be registered to the Music Finder. 2 Press the [6] (ADD TO MF) button to register the selected file to Music Finder. The display automatically changes to the Music Finder Record Edit display. 2 60 CVP-601 Reference Manual 3 Press [8] (OK) button to start the registration. Press the [8] (CANCEL) button to cancel the registration. 4 Confirm that the registered file name is shown in the MUSIC column while (SONG), (AUDIO) or the Style name is shown in the STYLE column. Recalling the registered data from Music Finder You can recall the registered Song, Audio or Style data in the same way as done in the “Selecting the Desired Song from among the Panel Settings” and “Searching the Panel Settings” in the Owner’s Manual, chapter 7. Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song – 7 NOTE If you want to play back files in the USB flash memory, connect the USB flash memory containing the data to the [USB TO DEVICE] terminal beforehand. To play back the registered files • To play back the recalled Song file, press the SONG [PLAY/PAUSE] button after selecting the SONG record. • To play back the recalled Audio file, press the [J] (AUDIO) button in the MUSIC FINDER display after selecting the AUDIO record. • To play back the recalled Style file, select the Style record then follow the same procedure as Style playback described in the Owner’s Manual, chapter 3. CVP-601 Reference Manual 61 Creating a Set of Favorite Records As convenient as the Search function is in exploring the depths of the Music Finder records, you may want to create a custom “folder” of your favorite records — so you can quickly call up the panel settings and song data you use frequently. 1 Call up the MUSIC FINDER display by pressing the [MUSIC FINDER] button and select the desired record. 2 Press the [H] (ADD TO FAVORITE) button to add the selected record to the FAVORITE display, then press the [G] (YES) button to actually add the record. 3 2 3 7 Call up the FAVORITE display by using the TAB [L][R] buttons, and check to see if the record has been added. Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song – Deleting Records from the FAVORITE Display 1 2 62 Select the record you want to delete from the FAVORITE display. Press the [H] (DELETE FROM FAVORITE) button, then press the [G] (YES) button to actually delete the record. CVP-601 Reference Manual Editing Records You can create a new record by editing the currently selected record. The newly created records are automatically saved in the internal memory. Call up the MUSIC FINDER display by pressing the [MUSIC FINDER] button and select the desired record to be edited. 2 Press the [8] (RECORD EDIT) button to call up the EDIT display. 3 Edit the record as desired. [A] MUSIC Edits the song name. Pressing the [A] button calls up the pop-up window to enter the song name. [B] KEYWORD Edits the keyword. Pressing the [B] button calls up the pop-up window to enter the keyword. [C] STYLE/SONG/ AUDIO Changes the Style in case of STYLE record (panel settings). Pressing the [C] button calls up the Style Selection display. After selecting the desired Style, press the [EXIT] button to return back to the Edit display. For SONG or AUDIO records, this field cannot be edited. [D] BEAT Changes the beat (time signature) of the record for search purposes. For SONG or AUDIO records, this field cannot be edited. 7 Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song – 1 NOTE Keep in mind that the Beat setting made here is only for the Music Finder search function; this does not affect the actual Beat setting of the Style itself. [E] FAVORITE Selects whether the edited record is entered to the FAVORITE display or not. [1] TEMPO Changes the Tempo. For SONG or AUDIO records, this field cannot be changed. [2] SECTION Selects the section that will automatically be called up set when the record is selected. This is useful, for example, when you want to have a selected Style automatically be set up to start with an Intro section. For SONG or AUDIO records, this field cannot be changed. [5]/ [6] GENRE Selects the desired genre. [7] GENRE NAME Creates a new genre. [I] DELETE RECORD Deletes the currently selected record. [4] CVP-601 Reference Manual 63 4 Enter the edits you’ve made to the record as described below. Creating a new record Press the [J] (NEW RECORD) button. The record is added to the ALL display. If you’ve entered the record to the FAVORITE display in step 3, the record is added to both the ALL display and the FAVORITE display. Overwriting an existing record Press the [8] (OK) button. If you set the record as a Favorite in step 3, the record is added to the FAVORITE display. When you edit the record in the FAVORITE display, the record is overwritten. To cancel and quit the Edit operation, press the [8] (CANCEL) button. Saving the Record as a Single File The Music Finder feature handles all the Records including the presets and additionally created records as a single file. Keep in mind that individual records (panel settings and song data) cannot be handled as separate files. 7 1 Call up the Save display. [MUSIC FINDER]  [7] FILES 2 Press the TAB [L][R] buttons to select the location for saving (USER or USB). 3 Press the [6] (SAVE) button to save the file. All records are saved together as a single file. Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song – Calling Up Music Finder Records Saved to USER or USB 1 Call up the File Selection display. [MUSIC FINDER]  [7] FILES 2 Use the TAB [L][R] buttons to select USER or USB. 3 Press the [A] – [J] buttons to select the desired Music Finder file. When the file is selected, a message is displayed according to the content of the file. Press the desired button. [F] REPLACE All Music Finder records currently in the instrument are deleted and replaced with the records of the selected file. NOTICE Selecting “REPLACE” automatically deletes all your original records from internal memory. Make sure that all important data has been archived to another location beforehand. 64 [G] APPEND The records called up are added to the record currently in the instrument. [H] CANCEL Selecting this button aborts the operation (the selected file is not called up). CVP-601 Reference Manual Registration Memory – Saving and Recalling Custom Panel Setups – Contents Deleting or renaming the Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Confirming the Registration Memory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Disabling Recall of Specific Items (Freeze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Calling Up Registration Memory Numbers in Order (Registration Sequence) . . . . . . . . . . . . . 68 • Confirming the Registration Sequence Setting in the Main Display . . . . . . . . . . . . . . . . . . . . . . . 70 • Saving the Registration Sequence Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Deleting or renaming the Registration 1 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the REGISTRATION BANK Selection display, then select the Registration Memory bank which contains the Registration you want to delete or rename. 8 Registration Memory – Saving and Recalling Custom Panel Setups – 1 2 2 Press the [8] (EDIT) button to call up the REGISTRATION EDIT display. Registrations in the selected bank will be displayed. CVP-601 Reference Manual 65 3 To delete the Registration, press the [5] (DELETE) button; to rename it, press the [1] (NAME) button. 4 4 Select a Registration you want to delete or rename by pressing one of the [A] – [D] and [F] – [I] buttons. The subsequent procedures are basically the same as those of renaming or deleting files described in chapter 5 of the Owner’s Manual. Confirming the Registration Memory Information You can call up the information display to take a look which Voices and Style are memorized to the [1] – [8] buttons of a Registration Memory Bank. 8 Registration Memory – Saving and Recalling Custom Panel Setups – 1 Simultaneously press the REGIST BANK [+] and [-] buttons to call up the Registration Bank Selection display, then use the [A] – [J] buttons to select the desired Bank. NOTE You can instantly call up the information display of the currently selected Registration Memory Bank by pressing the [DIRECT ACCESS] button and one of the REGISTRATION MEMORY [1] – [8] buttons in sequence. 2 Press the [7] (INFO.) button to call up the information display. 2 By using the TAB [L][R] buttons, you can switch between the two information display pages: information for the Registration Memory [1] – [4] buttons and information for the [5] – [8] buttons. 3 Press the [F] (CLOSE) button to close the information display. NOTE If certain Voice parts are set to off, the Voice part names for the corresponding parts are shown in gray. 66 CVP-601 Reference Manual Disabling Recall of Specific Items (Freeze) Registration Memory lets you recall all the panel setups you made with a single button press. However, there may be times that you want certain items to remain the same, even when switching Registration Memory setups. For example, you may want to switch Voices or effect settings while keeping the same accompaniment Style. This is where the Freeze function comes in handy. It lets you maintain the settings of certain items and leave them unchanged, even when selecting other Registration Memory buttons. 1 Call up the operation display. [FUNCTION]  [E] REGIST SEQUENCE/FREEZE/VOICE SET  TAB [L][R] FREEZE 2 Determine the items to be “frozen.” Select the desired item by using the [2] – [7] buttons, then enter or remove the checkmark by using the [8] (MARK ON)/[8] (MARK OFF) buttons. 3 Press the [F] (REGISTRATION FREEZE) button to turn the Freeze function on. 4 Press the [EXIT] button to exit from the operation display. Registration Memory – Saving and Recalling Custom Panel Setups – 3 8 CVP-601 Reference Manual 67 Calling Up Registration Memory Numbers in Order (Registration Sequence) As convenient as the Registration Memory buttons are, there may be times during a performance when you want to quickly switch between settings — without having to take your hands from the keyboard. The convenient Registration Sequence function lets you call up the eight setups in any order you specify, by simply using the TAB [L][R] buttons or the pedal as you play. 1 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the REGISTRATION BANK Selection display, then select the desired Registration Memory bank to program a sequence. 2 Call up the operation display. [FUNCTION]  [E] REGIST SEQUENCE/FREEZE/VOICE SET  TAB [L][R] REGISTRATION SEQUENCE 3 If you intend to use a pedal to switch Registration Memory settings, specify here how the pedal will be used — to advance or to reverse through the sequence. Use the [C] (REGIST+ PEDAL) button to select the pedal for advancing through the sequence. Use the [D] (REGIST- PEDAL) button to select the pedal for reversing through the sequence. Indicates the name of the currently selected Registration Memory Bank. 6 3 4 8 Registration Memory – Saving and Recalling Custom Panel Setups – NOTE If you assign the function to a pedal here, the other function set in the PEDAL display (page 78) becomes invalid. 4 Use the [E] (SEQUENCE END) button to determine how Registration Sequence behaves when reaching the end of the sequence. • STOP Pressing the TAB [R] button or the “advance” pedal has no effect. The sequence is “stopped.” • TOP The sequence starts again at the beginning. • NEXT BANK The sequence automatically moves to the beginning of the next Registration Memory Bank in the same folder. 68 CVP-601 Reference Manual 5 Program the Sequence order, from left to right. Press one of the REGISTRATION MEMORY [1] – [8] buttons on the panel, then press the [6] (INSERT) button to input the number. Indicates the Registration Memory numbers, in the order of the current Registration Sequence. [1] – [4] CURSOR Moves the cursor. [5] REPLACE Replaces the number at the cursor position with the currently selected Registration Memory number. [6] INSERT Inserts the number of the currently selected Registration Memory number before the cursor position. [7] DELETE Deletes the number at the cursor position. [8] CLEAR Deletes all numbers in the sequence. Press the [F] button to turn the Registration Sequence function on. 7 Press the [EXIT] button to exit from the operation display. 8 Registration Memory – Saving and Recalling Custom Panel Setups – 6 CVP-601 Reference Manual 69 Confirming the Registration Sequence Setting in the Main Display In the Main display, you can confirm whether the Registration Memory numbers are called up according to the sequence programmed on pages 68 – 69. The Registration Sequence is indicated at the top right of the Main display, letting you confirm the currently selected number. To shift the Registration Memory numbers, use the TAB [L][R] buttons when the Main display is shown. When pedal operation has been set in step 3 on page 68, you can also use a pedal to select the Registration Memory numbers in order. To return to the first Sequence, press the TAB [L] and [R] buttons simultaneously when the Main display is shown. This cancels the currently selected Sequence number (the box indicator at the top right goes out). The first Sequence will be selected by pressing one of the TAB [L][R] buttons or by pressing the pedal. NOTE The pedal can be used for Registration Sequence no matter which display is called up (except for the display in step 3 on page 68). Saving the Registration Sequence Settings The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the sequence (SEQUENCE END) are included as part of the Registration Memory Bank file. To store your newly programmed Registration Sequence, save the current Registration Memory Bank file. NOTICE Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you’ve saved it with the Registration Memory Bank file. 8 Registration Memory – Saving and Recalling Custom Panel Setups – 70 1 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the REGISTRATION BANK Selection display. 2 Press the [6] (SAVE) button to save the Bank file. CVP-601 Reference Manual Mixing Console – Editing the Volume and Tonal Balance – Contents Editing VOL/VOICE Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 • Adjusting Panning/Volume for Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 • Changing the Voice for Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Editing FILTER Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Editing TUNE Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Editing EFFECT Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 • Selecting an Effect Type for Each Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 • Creating an Original Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Editing EQ Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 • Editing and Saving the Selected Master EQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 The MIXING CONSOLE display called up via the [MIXING CONSOLE] button consists of five pages of parameters. Use the TAB [L]/[R] buttons to call up the desired page, and set various parameters for each part to adjust the balance between parts and create your desired sound. Note that the Save operation for your settings will differ depending on the part. For instructions, refer to the Owner’s Manual. Editing VOL/VOICE Parameters 9 1 Mixing Console – Editing the Volume and Tonal Balance – Adjusting Panning/Volume for Each Part Press the [D] (or [I]) button to select the PANPOT parameter or press the [E] (or [J]) button to select the VOLUME parameter. PANPOT VOLUME 2 Use the [1] – [8] buttons to adjust panning/volume for the desired part. NOTE When the display for SONG CH 1-8 or SONG CH 9-16 is selected, you can switch between the two by pressing the [A] (PART) button. 3 Save your settings. Refer to the Owner’s Manual, chapter 9. CVP-601 Reference Manual 71 Changing the Voice for Each Part You can change the Voice for each keyboard part, Style channel or Song channel. 1 Press the [C] (or [H]) button to select the VOICE parameter. 1 2 2 Press one of the [1] – [8] buttons to select the desired part. The Voice Selection display appears. 3 Select a Voice. Press one of the Voice category selection buttons on the panel, then select a Voice by using the [A] – [J] buttons. NOTE When the display for SONG CH 1- 8 or SONG CH 9-16 is selected, you can switch between the two by pressing the [A] (PART) button. NOTE Some Voices (such as Organ Flutes) cannot be selected for Style channels. NOTE Only Drum kit Voices and SFX kit Voices can be assigned to the RHY2 channel in the STYLE PART display. NOTE When playing GM Song data, channel 10 can only be used for a Drum kit Voice. 9 Mixing Console – Editing the Volume and Tonal Balance – 72 4 Press the [EXIT] button to return to the MIXING CONSOLE display. 5 Save your settings. Refer to the Owner’s Manual, chapter 9. CVP-601 Reference Manual Editing FILTER Parameters [A] PART This will be displayed only if SONG CH 1-8 or SONG CH 9-16 is selected for the part. Toggles between the two channel displays: SONG CH 1-8 and SONG CH 9-16. For details, refer to chapter 9 in the Owner’s Manual. [D]/[I] HARMONIC CONTENT Allows you to adjust the resonance effect (page 13) for each part. [E]/[J] BRIGHTNESS Determines the brightness of the sound for each part by adjusting the cutoff frequency (page 13). Editing TUNE Parameters [A]/[B]/ [F]/[G] PORTAMENTO TIME Portamento is a function that creates a smooth transition in pitch from the first note played on the keyboard to the next. The Portamento Time determines the pitch transition time. Higher values result in a longer pitch change time. Setting this to “0” results in no effect. This parameter is available when the selected keyboard part is set to Mono. [C]/[H] PITCH BEND RANGE Determines the range of the PITCH BEND for each keyboard part (when a pedal is assigned to this function; page 78). The range is from “0” to “12” with each step corresponding to one semitone. [D]/[I] OCTAVE Determines the range of the pitch change in octaves, over two octaves up or down for each keyboard part. [E]/[J] TUNING Determines the pitch of each keyboard part. [1] – [3] TRANSPOSE Allows you to set transposition for overall sound of the instrument (MASTER), Song playback (SONG), or the keyboard pitch (KBD), respectively. CVP-601 Reference Manual Mixing Console – Editing the Volume and Tonal Balance – 9 73 Editing EFFECT Parameters This instrument has an effect system featuring six separate blocks (Reverb, Chorus and DSP1-4). For each block, you can assign the desired effect type individually. The effects are applied independently for each part or globally for the entire sound according to the blocks: the effects of Reverb and Chorus blocks are applied to all of the parts input to the Mixing Console, DSP1 is applied only to the Style and Song sounds (or applied to a specific part of the Style or Song depending on the setting), and DSP2-4 are applied to the specific keyboard parts and Song parts. Use these instructions to set up various effects for blocks and parts to enhance the sound as desired. Selecting an Effect Type for Each Block NOTE When the display for SONG CH 1-8 or SONG CH 9-16 is selected, you can switch between the two by pressing the [A] (PART) button. 1 Press the [F] (TYPE) button in the EFFECT Page of the Mixing Console display. The Effect Type Selection display is called up. 9 2 Mixing Console – Editing the Volume and Tonal Balance – 2 74 3 4 5 Use the [1]/[2] buttons to select the effect BLOCK. Effect Block Applicable parts Effect characteristics REVERB All parts Reproduces the warm ambience of playing in a concert hall or jazz club. CHORUS All parts Produces a rich, “fat” sound as if several identical instruments are being played simultaneously. In addition, other type effects (such as reverb, delay, etc.) can also be selected in this effect block. DSP1 STYLE PART, SONG CHANNEL 1-16 This effect is applied only to Style/Song parts. When the “Connection” parameter selected in step 3 of “Creating an Original Effect” section (on page 75) is set to “System,” the DSP1 effect will be applied overall to the Style and Song. When it is set to “Insertion,” the DSP1 effect will be applied to a specific part of the Style or Song. DSP2-4 RIGHT 1, RIGHT 2, LEFT, SONG CHANNEL 1-16 For each of DSP2-4, you can select one of the parts or channels listed at left. When you select “RIGHT2” for DSP2, for example, the DSP2 Effect is applied only to the Right 2 part. Note that if you select a Song or Style which requires the DSP2-4 Blocks, the part assignment of these three Blocks will be changed automatically with last priority according to the data. CVP-601 Reference Manual 3 Use the [3]/[4] buttons to select the part to which you want to apply the effect. Note that a part cannot be selected if “REVERB” or “CHORUS” is selected, or if the CONNECTION parameter of “DSP1” is set to “System” (in step 3 of “Creating an Original Effect” below). This is because only one of the Effect Types can be selected to be commonly applied to all available Parts. 4 Use the [5]/[6] buttons to select the effect CATEGORY. 5 Use the [7]/[8] buttons to select the effect TYPE. If you want to edit the effect parameters, go on to the next operation. Creating an Original Effect 1 Once you’ve selected an Effect Block and Effect Type above, press the [F] button to call up the display for editing the effect parameters. 2 If you have selected one of the DSP2-4 effect blocks: You can edit both the conventional parameters and the convenient Variation parameter. Press the [E] button to move the cursor to the Variation parameter, then edit the value via the [6/[7] buttons. This parameter is effective only when the DSP VARIATION is on. To move the cursor to the normal parameters, press the [B] button. 9 Mixing Console – Editing the Volume and Tonal Balance – NOTE The Variation parameter can be turned on or off by pressing the [VOICE EFFECT]  [5] (DSP VARIATION). This lets you instantly and significantly change the sound of the effect. 2 4 3 3 Select the desired parameter for editing by using the [4]/[5] buttons, then adjust the value by using the [6]/[7] buttons. If you have selected the REVERB, CHORUS or DSP1 effect block, you can adjust the Effect Return Level by pressing [8] button. To re-select the Effect block, category and type, use the [1] – [3] buttons. The re-selected effect configuration is displayed at the upper left side box in the display. NOTE Keep in mind that in some cases noise may result if you adjust the effect parameters while playing the instrument. CVP-601 Reference Manual 75 4 Press the [I] (SAVE) button to call up the display for saving your original effect. 6 5 5 Use the [3] – [6] buttons to select the destination for saving the effect. The maximum number for effects that can be saved differs depending on the effect block. 6 Press the [I] (SAVE) button to save the effect. When recalling the saved effect, use the same procedure as in steps 4 – 5 of “Selecting an Effect Type for Each Block.” Editing EQ Parameters 9 Mixing Console – Editing the Volume and Tonal Balance – [A] PART This will be displayed only if SONG CH 1-8 or SONG CH 9-16 is selected for the part. Toggles between the two channel displays: SONG CH 1-8 and SONG CH 9-16. For details, refer to chapter 9 in the Owner’s Manual. [B]/[C] TYPE Selects the desired Master EQ type. This affects the overall sound of the instrument. [F] EDIT For editing the Master EQ. See page 77. [D]/[I] EQ HIGH Boosts or attenuates the high EQ band for each part. [E]/[J] EQ LOW Boosts or attenuates the low EQ band for each part. Equalizer (also called “EQ”) is a sound processor that divides the frequency spectrum into multiple bands that can be boosted or cut as required to tailor the overall frequency response. Usually an equalizer is used to correct the sound from speakers to match the special character of the room. For example, you can cut some of the low range frequencies when playing in large spaces where the sound is too “boomy,” or boost the high frequencies in rooms and close spaces where the sound is relatively “dead” and free of echoes. 76 CVP-601 Reference Manual The instrument possesses a high grade five-band digital EQ. With this function, a final effect — tone control — can be added to the output of your instrument. You can select one of the five preset EQ settings in the EQ display. You can even create your own custom EQ settings by adjusting the frequency bands, and save the settings to one of two User Master EQ types. Gain Bandwidth (also called “Shape” or “Q”) 0 Freq (Frequency) 5 bands  LOW EQ1 LOWMID EQ2 MID EQ3 HIGHMID EQ4 HIGH EQ5 Editing and Saving the Selected Master EQ Master Equalizer is EQ processing that is applied to the overall sound (except Audio) which is finally output from the Effect block to the speakers or headphones. 1 Press the [F] (EDIT) button in the EQ Page of the Mixing Console display. The MASTER EQ EDIT display is called up. 2 9 4 Mixing Console – Editing the Volume and Tonal Balance – 5 3 2 Use the [B]/[C] buttons to select a preset EQ type. The set parameters of the selected EQ type are automatically shown at the bottom of the display. 3 Use the [3] – [7] buttons to boost or cut each of the five bands. Use the [8] buttons to boost or cut all the five bands at the same time. 4 Adjust the Q (bandwidth) and the FREQ (center frequency) of the band selected in step 3. To adjust the bandwidth (also called “Shape” or “Q”), use the [1] buttons. The higher the value of Q, the narrower the band width. To adjust the FREQ (center frequency), use the [2] buttons. The available FREQ range is different for each band. 5 Press the [H] or [I] (STORE 1 or 2) button to save the edited EQ type. Up to two types of EQ can be created and saved. The saved EQ can be recalled from the EQ tab display by using the [B]/[C] buttons. CVP-601 Reference Manual 77 Connections – Using Your Instrument with Other Devices – Contents Footswitch/Foot Controller Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 • Assigning Specific Functions to Each Foot Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 Connections – Using Your Instrument with Other Devices – MIDI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 • MIDI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 • MIDI Transmit Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 • MIDI Receive Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 • Setting the Bass Note for Style Playback via MIDI Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 • Setting the Chord Type for Style Playback via MIDI Receive. . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Footswitch/Foot Controller Settings Assigning Specific Functions to Each Foot Pedal In addition to the footswitch or foot controller, the three piano pedals installed to the instrument (Right, Center and Left pedals) can also be assigned to various functions here. The following explanations cover the related operations and assignable functions (parameters). NOTE For information on how to connect a Footswitch or Foot Controller, refer to the Owner’s Manual, chapter 10. 10 1 Call up the operation display. [FUNCTION]  [D] CONTROLLER  TAB [L][R] PEDAL 2 Use the [A]/[B] buttons to select one of the three pedals or the AUX-connected pedal, to which the function is to be assigned. 2 5 6 3 3 4 Use the [1] buttons to select the function to be assigned to the pedal specified in step 2. For information on available parameters, see pages 79 – 81. NOTE You can also assign other functions to the pedal — Punch in/out of Song (page 52) and Registration Sequence (page 68). If you assign multiple func- tions to the pedal, the priority is: Punch in/out of Song  Registration Sequence  functions assigned here. 78 CVP-601 Reference Manual Use the [2] – [8] buttons to set the details of the selected functions (the part for which the function is applied, etc.). The available parameters differ depending on the function selected in step 3. 5 When you have selected the left or center pedal in step 2, press the [H] (DEPEND ON R1 VOICE) button to turn this parameter OFF. This setting locks the pedal function so that it does not change automatically when you change the Right 1 Voice. 6 If necessary, set the polarity of the pedal by using the [I] button. Pedal on/off operation may differ depending on the particular pedal you’ve connected to the instrument. For example, pressing down on one pedal may turn the selected function on, while pressing a different make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation. Connections – Using Your Instrument with Other Devices – 4  Assignable Pedal Functions For functions indicated with “*”, use only the foot controller; proper operation cannot be done with a footswitch. ARTICULATION When you use a Super Articulation Voice that has an effect assigned to the pedal/footswitch, you can enable the effect by pressing the pedal/footswitch. You can turn this function on or off for each keyboard part on this display. VOLUME* Allows you to use a foot controller to control the volume. This function is available only for the pedal connected to the instrument’s AUX PEDAL jack. SUSTAIN Allows you to use a pedal to control the sustain. When you press and hold the pedal, all notes played on the keyboard have a longer sustain. Releasing the pedal immediately stops (damps) any sustained notes. If you are using the right pedal or connected foot controller, the “HALF PEDAL POINT” parameter allows you to specify how far down you should press on the pedal until the damper effect starts working. SOSTENUTO Allows you to use a pedal to control the Sostenuto effect. If you play a note or chord on the keyboard and press the pedal while holding the note(s), the notes will sustain as long as the pedal is held. However, all subsequent notes will not sustain. This makes it possible to sustain a chord, for example, while other notes are played staccato. 10 NOTE This function will not affect any of the Organ Flutes and only some of the Super Articulation Voices, even if this has been assigned to the Foot Pedals. SOFT Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces the volume and changes the timbre of the notes you play. This is effective only for certain appropriate Voices. You can turn this pedal function on or off for each keyboard part on this display. If you are using the right pedal or connected foot controller, the “HALF PEDAL POINT” parameter allows you to specify how far down you should press on the pedal until the soft effect starts working. CVP-601 Reference Manual 79 GLIDE When the pedal is pressed, the pitch changes, and then returns to normal pitch when the pedal is released. The following parameters can be set for this function on this display. UP/DOWN Determines whether the pitch change goes up (is raised) or down (is lowered). RANGE Determines the range of the pitch change, in semitones. ON SPEED Determines the speed of the pitch change when the pedal is pressed. Connections – Using Your Instrument with Other Devices – OFF SPEED Determines the speed of the pitch change when the pedal is released. LEFT, RIGHT 1, 2 Turns this pedal function on or off for each keyboard part. PORTAMENTO The portamento effect (a smooth slide between notes) can be produced while the pedal is pressed. Portamento is produced when notes are played legato style (i.e., a note is played while the preceding note is still held). The portamento time can also be adjusted form the Mixing Console display (page 73). This function does not affect certain Natural Voices, which would not sound appropriately with this function. NOTE This function will not affect any of the Organ Flutes, Super Articulation Voices and only some of the Super Articulation Voices, even if this has been assigned to the Foot Pedals. PITCHBEND* Allows you to bend the pitch of notes up or down by using the pedal. This function can be assigned to the right pedal or connected foot controller. The following parameters can be set for this function on this display. UP/DOWN Determines whether the pitch change goes up (is raised) or down (is lowered). RANGE Determines the range of the pitch change, in semitones. 10 LEFT, RIGHT 1, 2 Turns this pedal function on or off for each keyboard part. 80 MODULATION* Applies a vibrato effect to notes played on the keyboard. Moreover, various effects can be added to the S. Articulation Voice. The effect becomes deeper when pressing down the foot controller. You can turn this pedal function on or off for each keyboard part on this display. DSP VARIATION Switches Voice Effect DSP VARIATION on and off. VIBE ROTOR ON/OFF Switches the VIBRATE SW parameter on and off when the VIBE VIBRATE effect type is selected. HARMONY/ECHO Switches the HARMONY/ECHO Voice Effect on and off. SCORE PAGE +/- While the Song is stopped, you can turn to the next/previous score page (one page at a time). LYRICS PAGE +/- While the Song is stopped, you can turn to the next/previous lyrics page (one page at a time). SONG PLAY/PAUSE Same as the SONG [PLAY/PAUSE] button. STYLE START/STOP Same as the STYLE [START/STOP] button. CVP-601 Reference Manual Same as the [TAP TEMPO] button. SYNCHRO START Same as the [SYNC START] button. SYNCHRO STOP Same as the [SYNC STOP] button. INTRO 1–3 Same as the INTRO [I]–[III] buttons. MAIN A–D Same as the MAIN VARIATION [A]–[D] buttons. FILL DOWN Plays a fill-in, which is automatically followed by the Main section of the button on the immediate left. FILL SELF Plays a fill-in. FILL BREAK Plays a break. FILL UP Plays a fill-in, which is automatically followed by the Main section of the button on the immediate right. ENDING1–3 Same as the ENDING/rit. [I]–[III] buttons. FADE IN/OUT Switches Fade In /Fade Out function on and off. FINGERD/FING ON BASS The pedal alternately switches between the Fingered and On Bass modes (page 18). BASS HOLD While the pedal is pressed, the Accompaniment Style bass note will be held even if the chord is changed during Style playback. If the fingering is set to “AI FULL KEYBOARD,” the function does not work. PERCUSSION The pedal plays a percussion instrument selected by the [4] – [8] buttons. You can use the keyboard to select the desired percussion instrument. Connections – Using Your Instrument with Other Devices – TAP TEMPO NOTE When you select the percussion instrument by pressing a key on the keyboard, the velocity with which you press the key determines the percussion volume. RIGHT 1 ON/OFF Same as the PART ON/OFF [RIGHT 1] button. RIGHT 2 ON/OFF Same as the PART ON/OFF [RIGHT 2] button. LEFT ON/OFF Same as the PART ON/OFF [LEFT] button. OTS +/- Calls up the next/previous One Touch Setting. 10 CVP-601 Reference Manual 81 MIDI Settings In this section, you can make MIDI-related settings for the instrument. The CVP-601 gives you a set of ten pre-programmed templates that let you instantly and easily reconfigure the instrument to match your particular MIDI application or external device. Also, you can edit the pre-programmed templates and save up to ten of your original templates to the USER display. NOTE You can save all your original templates as a single file to USB flash memory: [FUNCTION]  [J] UTILITY  TAB [L][R] SYSTEM RESET  [G] MIDI SETUP FILES. See page 95. 1 Connections – Using Your Instrument with Other Devices – Call up the operation display. [FUNCTION]  [I] MIDI 2 6 10 82 3 2 Select a pre-programmed template from the PRESET Page (page 83). If you have already created your original template and saved it to the USER Page, you can also select the template from the USER Page. 3 Press the [8] (EDIT) button to call up the MIDI display to edit the selected template. 4 Use the TAB [L][R] buttons to call up the relevant setting display. • SYSTEM MIDI System Settings (page 84) • TRANSMIT MIDI Transmission Settings (page 85) • RECEIVE MIDI Reception Settings (page 86) • BASS Settings for the bass note of chord for Style playback via MIDI reception data (page 87) • CHORD DETECT Settings for the chord type for Style playback via MIDI reception data (page 87) 5 When you’ve finished editing, press the [EXIT] button to return to the MIDI template Selection display. 6 Select USER tab display by using the TAB [L][R] buttons, then press the [6] (SAVE) button to save the edited template. CVP-601 Reference Manual ALL PARTS Transmits all parts including the keyboard parts (RIGHT 1, 2, and LEFT), with the exception of Song parts. KBD & STYLE Basically the same as “ALL PARTS” with the exception of how keyboard parts are managed. The right-hand parts are handled as “UPPER” instead of RIGHT 1 and 2 and the left-hand part is handled as “LOWER.” Master KBD In this setting, the instrument functions as a “master” keyboard, playing and controlling one or more connected tone generators or other devices (such as a computer/sequencer). Song All transmit channels are set to correspond to Song channels 1–16. This is used to play Song data with an external tone generator and to record Song data to an external sequencer. Clock Ext. Playback or recording (Song, Style, etc.) synchronizes with an external MIDI clock instead of the instrument’s internal clock. This template should be used when you wish to set the tempo on the MIDI device connected to the instrument. MIDI Accord 1 MIDI accordions allow you to transmit MIDI data and play connected tone generators from the keyboard and bass/chord buttons of the accordion. This template lets you play melodies from the keyboard and control Style playback on the instrument with the left-hand buttons. MIDI Accord 2 Basically the same as “MIDI Accord1” above, with the exception that the chord/bass notes you play with your left hand on the MIDI Accordion are recognized also as MIDI note events. MIDI Pedal 1 MIDI pedal units allow you play connected tone generators with your feet (especially convenient for playing single note bass parts). This template lets you play/control the chord root in Style playback with a MIDI pedal unit. MIDI Pedal 2 This template lets you play the bass part for Style playback by using a MIDI pedal unit. MIDI OFF No MIDI signals are sent or received. CVP-601 Reference Manual Connections – Using Your Instrument with Other Devices –  Pre-programmed MIDI Templates 10 83 MIDI Settings The explanations here apply to the SYSTEM Page in step 4 on page 82. Use the [A]/[B] buttons to select the parameters (below), then set the ON/OFF status by using the [1] – [8] buttons. Connections – Using Your Instrument with Other Devices – 1 Local Control Turns the Local Control for each part on or off. When Local Control is set to “ON,” the keyboard of the instrument controls its own (local) internal tone generator, allowing the internal Voices to be played directly from the keyboard. If you set Local to “OFF,” the keyboard and controllers are internally disconnected from the instrument’s tone generator section so that no sound is output when you play the keyboard or use the controllers. For example, this allows you to use an external MIDI sequencer to play the instrument’s internal Voices, and use the instrument keyboard to record notes to the external sequencer and/or play an external tone generator. 2 Clock setting, etc.  CLOCK Determines whether the instrument is controlled by its own internal clock or a MIDI clock signal received from an external device. INTERNAL is the normal Clock setting when the instrument is being used alone or as a master keyboard to control external devices. If you are using the instrument with an external sequencer, MIDI computer, or other MIDI device, and you want to synchronize it to that device, set this parameter to the appropriate setting: MIDI, USB 1, or USB 2. In this case, make sure that the external device is connected properly (e.g., to the instrument’s MIDI IN terminal), and that it is properly transmitting a MIDI clock signal. When this is set for control by an external device (MIDI, USB 1 or USB 2), the Tempo is indicated as “Ext.” in the Main display. 10 NOTE If the Clock is set to something other than INTERNAL, the Style or Song cannot be played from the panel buttons.  TRANSMIT CLOCK Turns MIDI clock (F8) transmission on or off. When set to OFF, no MIDI clock or Start/Stop data is transmitted even if a Song or Style is played back.  RECEIVE TRANSPOSE Determines whether or not the instrument’s transpose setting is applied to the note events received by the instrument via MIDI.  START/STOP Determines whether incoming FA (start) and FC (stop) messages affect Song or Style playback. 3 MESSAGE SW (Message Switch)  SYS/EX. The “Tx” setting turns MIDI transmission of MIDI System Exclusive messages on or off. The “Rx” setting turns MIDI reception and recognition of MIDI System Exclusive messages generated by external equipment on or off.  CHORD SYS/EX. The “Tx” setting turns MIDI transmission of MIDI Chord System Exclusive data (chord detect, root and type) on or off. The “Rx” setting turns MIDI reception and recognition of MIDI chord exclusive data generated by external equipment on or off. 84 CVP-601 Reference Manual MIDI Transmit Settings The explanations here apply to the TRANSMIT Page in step 4 on page 82. This determines which parts will be sent as MIDI data and over which MIDI channel the data will be sent. 1 1 1 2 Connections – Using Your Instrument with Other Devices – The dots corresponding to each channel (1–16) flash briefly whenever any data is transmitted on the channel(s). 3 Use the [A]/[B] buttons or [1]/[2] buttons to select the part for changing transmit settings. With the exception of the two parts below, the configuration of the parts is the same as those already explained elsewhere in the Owner’s Manual. UPPER A keyboard part played on the right side of the keyboard from the Split Point for the Voices (RIGHT 1 and/or 2). LOWER A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This is not affected by the on/off status of the [ACMP ON/OFF] button. 2 10 Use the [3] buttons to select a channel via which the selected part will be transmitted. NOTE If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel — resulting in unex- pected sounds and possible glitches in the connected MIDI device. NOTE Protected Songs cannot be transmitted even if the proper Song channels 1-16 are set to be transmitted. 3 Use the [4] – [8] button to determine the types of data to be sent. The following MIDI messages can be set on the TRANSMIT/RECEIVE display. NOTE (Note events) ..........page 58 CC (Control Change)........page 58 PC (Program Change) ......page 58 PB (Pitch Bend) .................page 58 AT (Aftertouch) .................page 58 CVP-601 Reference Manual 85 MIDI Receive Settings The explanations here apply to the RECEIVE Page in step 4 on page 82. This determines which parts will receive MIDI data and over which MIDI channels the data will be received. 1 Connections – Using Your Instrument with Other Devices – The dots corresponding to each channel (1–16) flash briefly whenever any data is received on the channel(s). 1 2 3 1 Use the [A]/[B] buttons or [1]/[2] buttons to select the channel to be received. The instrument can receive MIDI messages over 32 channels (16 channels x 2 ports) by USB connection. 2 Use the [3] buttons to select the part via which the selected channel will be received. With the exception of the two parts below, the configuration of the parts is the same as those already explained elsewhere in the Owner’s Manual. KEYBOARD The received note messages control the instrument’s keyboard performance. EXTRA PART 1–5 There are five parts specially reserved for receiving and playing MIDI data. Normally, these parts are not used by the instrument itself. The instrument can be used as a 32-channel multi-timbral tone generator by using these five parts in addition to the parts. 10 3 Use the [4] – [8] button to determine the types of data to be received. MIDI transmission/reception via the USB terminal and MIDI terminals The relationship between the [MIDI] terminals and the [USB] terminal which can be used for transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:  MIDI reception [MIDI IN] jack  MIDI transmission [USB TO HOST] jack [MIDI OUT] jack [USB TO HOST] jack Port handling USB1 USB2 Merge MIDI/USB1 01–16 86 CVP-601 Reference Manual USB2 01–16 MIDI/USB 01–16 Setting the Bass Note for Style Playback via MIDI Receive The explanations here apply to the BASS Page in step 4 on page 82. These settings let you determine the bass note for Style playback, based on the note messages received via MIDI. The note on/off messages received at the channel(s) set to “ON” are recognized as the bass note of the chord of Style playback. The bass note will be detected regardless of the [ACMP ON/OFF] or split point settings. When several channels are simultaneously set to “ON,” the bass note is detected from merged MIDI data received over the channels . Connections – Using Your Instrument with Other Devices – 1 2 1 Use the [A]/[B] buttons to select the channel. 2 Use the [1] – [8] buttons to set the desired channel to ON or OFF. You can also set all channels to OFF by pressing the [I] (ALL OFF) button. Setting the Chord Type for Style Playback via MIDI Receive The explanations here apply to the CHORD DETECT Page in step 4 on page 82. These settings let you determine the chord type for Style playback, based on the note messages received via MIDI. The note on/off messages received at the channel(s) set to “ON” are recognized as the notes for detecting chords in Style playback. The chords to be detected depend on the fingering type. The chord types will be detected regardless of the [ACMP ON/OFF] or Split Point settings. When several channels are simultaneously set to “ON,” the chord type is detected from merged MIDI data received over the channels. 10 2 The operation procedure is basically the same as that of the BASS display above. CVP-601 Reference Manual 87 Utility – Making Global Settings – Contents CONFIG1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 CONFIG2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 OWNER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 SYSTEM RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 • Factory Reset — Restoring the Factory Programmed Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 • Custom Reset — Saving and Recalling Your Original Settings as a Single File . . . . . . . . . . . . . . 95 CONFIG1 Utility – Making Global Settings – Call up the operation display. [FUNCTION] – [UTILITY] TAB [L][R] CONFIG 1 Select the desired parameter: 1 Fade In/Out 2 Metronome 3 Parameter Lock 4 Tap 5 Auto Power Off 11 1 Fade In/Out These parameters determine the behavior when the Style or Song playback is faded in/out. 88 [3] FADE IN TIME Determines the time it takes for the volume to fade in, or go from minimum to maximum (range of 0 – 20.0 seconds). [4] FADE OUT TIME Determines the time it takes for the volume to fade out, or go from maximum to minimum (range of 0 – 20.0 seconds). [5] FADE OUT HOLD TIME Determines the time the volume is held at 0 following the fade out (range of 0 – 5.0 seconds). CVP-601 Reference Manual 2 Metronome [2] VOLUME Determines the level of the metronome sound. [3] – [5] SOUND Determines which sound is used for the metronome. BELL OFF..................Conventional metronome sound, with no bell accent. BELL ON ...................Conventional metronome sound, with bell accent. ENGLISH VOICE ......Count in English GERMAN VOICE......Count in German JAPANESE VOICE ....Count in Japanese FRENCH VOICE .......Count in French SPANISH VOICE.......Count in Spanish [6]/ [7] TIME SIGNATURE Determines the time signature of the metronome sound. Utility – Making Global Settings – 3 Parameter Lock This function is used to “lock” specific parameters (effect, split point, etc.) to make them selectable only via the panel control — in other words, instead of being changed via Registration Memory, One Touch Setting, Music Finder, or Song and sequence data. Use the [1] – [7] buttons to select the desired parameter, then lock it with the [8] (MARK ON) button. 4 Tap This allows you to set the drum sound and the velocity which will sound when the Tap function is used. [2] – [4 ] PERCUSSION Selects the instrument. [5]/ [6] VELOCITY Sets the velocity. 5 AUTO POWER OFF Refer to the Owner’s Manual. 11 CVP-601 Reference Manual 89 CONFIG2 Call up the operation display. [FUNCTION] – [UTILITY] TAB [L][R] CONFIG 2 Select the desired parameter: 1 Speaker 2 Voice Category Button Options/Display-related Settings 1 Speaker-related settings Utility – Making Global Settings – [2]/ [3] SPEAKER Determines whether or not the speaker will sound. HEADPHONE SW Speaker sounds normally, but is cut off when headphones are inserted to the PHONES jack. ON: Speaker sound is always on. OFF: Speaker sound is off. You can only hear the instrument sound via the headphones. [4] I.A. CONTROL ON/OFF I.A. Control (Intelligent Acoustic Control) is a function which automatically adjusts and controls the sound quality according to the overall volume of the instrument. Even when the volume is low, it permits both low sounds and high sounds to be clearly heard. I.A. Control is effective only from the sound output of the instrument speakers. [5] I.A. CONTROL DEPTH This sets the depth of the I.A. Control. The higher the value, the more clearly that low and high sounds are heard at lower volume levels. [6]/ [7] AUX IN NOISE GATE This effect mutes the input signal when the input from the AUX IN falls below a specified level. 11 90 CVP-601 Reference Manual 2 Voice Category Button Options/Display-related settings [1]/ [2] VOICE CATEGORY UTTON OPTIONS Determines how the Voice Selection display is opened when one of the VOICE buttons is pressed. OPEN & SELECT Opens the Voice Selection display with the previously selected Voice in the Voice category automatically selected (when one of the VOICE buttons is pressed). OPEN ONLY Opens the Voice Selection display with the currently selected Voice (when one of the VOICE buttons is pressed). [3]/ [4] DISPLAY VOICE NUMBER Determines whether or not the Voice bank and number are shown in the Voice Selection display. This is useful when you want to check which bank select MSB/LSB values and program change number you need to specify when selecting the Voice from an external MIDI device. NOTE The numbers displayed here start from “1.” Accordingly the actual MIDI program change numbers are one lower, since that number system starts from “0.” NOTE For the GS Voices, the Display Voice Number is not available (the program change numbers are not [5]/ [6] DISPLAY STYLE TEMPO Selects whether the default tempo of each Style is displayed above the Style name or not in the Style Selection display. [7]/ [8] POPUP DISPLAY TIME Determines the time which elapses before the pop-up windows close. (Pop-up windows are displayed when you press buttons such as TEMPO, TRANSPOSE, etc.) Utility – Making Global Settings – shown). 11 CVP-601 Reference Manual 91 MEDIA You can set or execute important media-related operations for the instrument. The word “media” refers to the connected USB flash memory. Call up the operation display. [FUNCTION] – [UTILITY] TAB [L][R] MEDIA Utility – Making Global Settings – [A]/[B] DEVICE LIST Selects the desired USB flash memory for checking the remaining memory of (see “PROPERTY” below) or for formatting (see the Owner’s Manual). [F] PROPERTY Opens the Property display of the USB flash memory selected by [A]/[B] buttons, from which you can check the amount of remaining memory. NOTE The displayed remaining memory value is an approximate value. [H] FORMAT Formats the USB flash memory selected by [A]/[B] buttons. Refer to the Owner’s Manual, chapter 10. [3]/ [4] SONG AUTO OPEN Turns the Song Auto Open function on or off. When this is set to “ON” and the USB flash memory selected in the Device List above is inserted, the instrument automatically calls up the first MIDI Song in the USB flash memory. 11 92 CVP-601 Reference Manual OWNER [D] BACKUP Allows you to backup all data on the instrument to a USB flash memory. Refer to the Owner’s Manual. [E] RESTORE Loads the backup file from the USB flash memory. [I] OWNER NAME Allows you to enter your name as the owner. The Owner name is indicated on the opening display when you turn the power on. Refer to the Owner’s Manual. [4]/ [5] LANGUAGE Determines the language used for the display messages. Once you change this setting, all messages will be shown in the selected language. [7]/ [8] VERSION Displays the version number of this instrument. Utility – Making Global Settings – Call up the operation display. [FUNCTION] – [UTILITY] TAB [L][R] OWNER 11 CVP-601 Reference Manual 93 SYSTEM RESET There are two reset methods in the SYSTEM RESET display: Factory Reset and Custom Reset. Call up the operation display. [FUNCTION] – [UTILITY] TAB [L][R] SYSTEM RESET Custom Reset (see page 95) Factory Reset (see below) Utility – Making Global Settings – Factory Reset — Restoring the Factory Programmed Settings This function lets you restore the status of the instrument to the original factory settings. 1 11 2 94 Select the desired item to be restored by using [1] – [3] buttons and add a checkmark to it by pressing the [4] (MARK ON) button. To remove the checkmark, press the [4] (MARK OFF) button. SYSTEM SETUP Restores the System Setup parameters to the original factory settings. Refer to the Data List for details about which parameters belong to the System Setup. MIDI SETUP Restores the MIDI settings including the MIDI templates on the USER tab display to the original factory status. USER EFFECT Restores the User Effect settings, including the user effect types and user master EQ types created via the Mixing Console display, to the original factory settings. MUSIC FINDER Restores the Music Finder data (all records) to the original factory settings. FILES & FOLDERS Deletes all files and folders stored in the USER tab display. REGIST Temporarily deletes the current Registration Memory settings of the selected Bank. The same can be done also by turning the power button ON while holding the B6 key (right-most B key on the keyboard). Press the [D] (FACTORY RESET) button to execute the Factory Reset operation for all checkmarked items. CVP-601 Reference Manual Custom Reset — Saving and Recalling Your Original Settings as a Single File 1 Make all desired settings on the instrument. 2 Call up the operation display. [FUNCTION]  [J] UTILITY  TAB [L][R] SYSTEM RESET 3 Press one of the [F] – [I] buttons to call up the relevant display for saving your data. [F] SYSTEM SETUP FILES Parameters set on the various displays such as the [FUNCTION]  [J] UTILITY are handled as a single System Setup file. Refer to the Data List for details on which parameters belong to the System Setup. [G] MIDI SETUP FILES The MIDI settings including the MIDI templates on the USER tab display are handled as a single file. [H] USER EFFECT FILES The User Effect settings including the user effect types and user master EQ types created via the Mixing Console displays are managed as a single file. [I] MUSIC FINDER FILES All the preset and created records of the Music Finder are handled as a single file. 4 Use the TAB [L][R] buttons to select one of the tabs (other than the PRESET) to which your settings will be saved. 5 Press the [6] (SAVE) button to save your file. 6 To recall your file, press the desired [F] – [I] buttons in the SYSTEM RESET display, then select the desired file. Utility – Making Global Settings – For the items below, you can save your Original Settings as a Single File for future recall. 11 CVP-601 Reference Manual 95 Index Numerics Channel ..........................................32 Effect (Mixing Console) .................. 74 1-16 ................................................ 58 CHANNEL (Song Creator) ..............55 EFFECT/EQ ............................. 14, 16 CHANNEL (Style Creator) ..............31 EG .................................................. 13 Channel Events ..............................54 EQ .................................................. 76 A CHANNEL TRANSPOSE ...............56 EQUAL ............................................. 8 ACCENT TYPE .............................. 31 CHORD (Song Creator) ..................58 EXPAND/COMP. ............................ 31 Accompaniment ............................. 17 CHORD (Style Creator) ..................35 ADD TO FAVORITE ...................... 62 Chord Events ..................................58 ADD TO MF ................................... 60 CHORD FINGERING ......................17 AI FINGERED ................................ 18 Chord Fingering ..............................17 AI FULL KEYBOARD ..................... 18 CHORD NOTE ONLY .......................7 ALL-PURPOSE .............................. 36 CHORD SYS/EX. ...........................84 AMPLITUDE .................................. 12 Chord Tutor ....................................17 Any Key .......................................... 43 CHORUS ........................................74 APPEND ........................................ 64 CHORUS DEPTH (Voice Set) ........14 ARABIC1, ARABIC2 ........................ 9 CLOCK ...........................................84 ARPEGGIO .................................... 36 Clock setting ...................................84 ARTICULATION ............................. 79 COMMON .......................................11 ASSEMBLY .................................... 28 CONFIG1 ........................................88 ASSIGN ........................................... 7 CONFIG2 ........................................90 ATTACK ......................................... 13 Connections ....................................78 AUTO CH SET ............................... 42 CONTROLLER ...............................78 AUTO POWER OFF ...................... 89 CONTROLLER (Voice Set) ............12 AUX IN NOISE GATE .................... 90 Cool! .................................................3 B D BACKUP ........................................ 93 DECAY ...........................................13 BANK ............................................. 65 Delete (Registration Memory) .........65 BAR CLEAR ................................... 32 Delete (Rhythm) .............................27 BAR COPY .................................... 32 DELETE (Song Creator) .................55 BASE NOTE .................................... 9 DEVICE LIST ..................................92 BASIC ............................................ 25 DORIAN ..........................................36 BEAT CONVERTER ...................... 30 DORIAN 5th ....................................36 BLOCK ........................................... 74 Drums ...............................................4 BOOST/CUT .................................. 31 DSP ................................................74 BRIGHT (Brightness) ..................... 13 DSP (Voice Set) .............................14 BRIGHTNESS ................................ 73 H DYNAMICS .....................................31 HARMO. (Harmonic content) ......... 13 BYPASS ......................................... 35 C Echo Types .......................................7 CENTER PEDAL (Voice Set) ......... 12 EDIT (Registration Memory) ...........65 CHANNEL ...................................... 32 EFFECT ..........................................74 CVP-601 Reference Manual Fade In/Out .................................... 88 FILES (Music Finder) ..................... 64 FILTER ........................................... 73 Filter (Mixing Console) ................... 73 FILTER (Voice Set) ........................ 13 FINE ............................................... 30 FINGERED ..................................... 18 FINGERED ON BASS .................... 18 Follow Lights .................................. 43 Foot Controller ............................... 78 FOOTAGE ...................................... 16 Footswitch ...................................... 78 FORMAT ........................................ 92 FREEZE ......................................... 67 FULL KEYBOARD .......................... 18 G GLIDE ............................................ 80 GM&XG ............................................ 5 GROOVE ....................................... 30 GUIDE ............................................ 41 Guide .............................................. 41 Guide Function ............................... 42 GUIDE LAMP TIMING .................... 43 GUITAR .......................................... 35 HARMONIC CONTENT ................. 73 E 96 F HARMONIC MINOR ....................... 36 HARMONIC MINOR 5th ................. 36 HARMONY ..................................... 14 Harmony Types ................................ 6 Harmony/Echo ..................................6 MIDI Templates .............................. 83 PEDAL PUNCH IN/OUT .................53 HEADPHONE SW ..........................90 MIX ................................................. 56 Performance assistant technology ..44 HIGH KEY ......................................37 Mixing Console .............................. 71 PHRASE MARK REPEAT ..............41 MODE (Organ Flutes) .................... 16 PIANO (Voice Set) ..........................11 MODULATION (Pedal) ................... 80 Pitch ..................................................8 MODULATION (Voice Set) ............ 12 PITCH BEND RANGE ....................73 MONO/POLY ................................. 12 PITCHBEND (Pedal) ......................80 Multi Assign Type ............................. 7 Playback during Style Assembly .....29 MULTI FINGER .............................. 18 Playing the Keyboard .......................3 Music Finder .................................. 60 PORTAMENTO (Pedal) ..................80 Music Notation ............................... 38 PORTAMENTO TIME ...............12, 73 I I.A. CONTROL ...............................90 IAC .................................................90 Information (Registration Memory) .................66 K Karao-Key ......................................43 KEY OFF SAMPLE ........................11 KEY SIGNATURE ..........................39 KEYBOARD (Transpose) .................9 KEYBOARD/PANEL .........................9 Practice ...........................................38 N NATURAL MINOR ......................... 36 NATURAL MINOR 5th ................... 36 PROPERTY ....................................92 Punch In/Out ...................................52 PURE MAJOR, PURE MINOR .........8 PYTHAGOREAN ..............................8 Natural! ............................................ 3 Non-rhythm channels (Style Creator) ............................ 27 Q L Note Events ................................... 58 QUANTIZE ......................................32 LANGUAGE ...................................93 NOTE LIMIT ................................... 37 QUANTIZE (Score) .........................39 LEFT PEDAL (Voice Set) ...............12 NOTE LIMIT HIGH ......................... 37 QUANTIZE (Song Creator) .............55 LENG (Length) ...............................16 NOTE LIMIT LOW .......................... 37 QUICK START ................................42 LFO AMOD (Voice Set) ..................12 NOTE NAME .................................. 39 LFO FMOD .....................................12 Note Transposition ................... 33, 35 LFO PMOD .....................................12 NTR ................................................ 35 R Live! ..................................................3 NTT ................................................ 35 Realtime Recording (Style) .............25 REC END ........................................52 Local Control ..................................84 Loop Recording ..............................25 LYRICS ..........................................38 Lyrics ..............................................57 LYRICS (Song Creator) ..................58 Lyrics Events ..................................58 LYRICS LANGUAGE .....................42 REC START ...................................52 O OCTAVE ........................................ 73 RECEIVE TRANSPOSE .................84 One Touch Setting ......................... 23 Recordable Voices (Style Creator) .............................26 Organ Flutes .................................. 16 Recording .......................................45 Organ Flutes! ................................... 4 Recording Chords ...........................49 ORIGINAL BEAT ........................... 30 Recording Melodies ........................45 OTS INFO. ..................................... 23 M OTS LINK TIMING ......................... 19 REGIST SEQUENCE/ FREEZE/VOICE SET ..................68 MASTER (Transpose) ......................9 Overdub Recording ........................ 25 REGISTRATION FREEZE ..............67 Master EQ ......................................77 OWNER ......................................... 93 Registration Memory .......................65 MASTER TUNE ................................8 OWNER NAME .............................. 93 REGISTRATION SEQUENCE ........68 Registration Sequence ...................68 MEAN-TONE ....................................8 MEDIA ............................................92 MEGAEnhancer ...............................4 MegaVoice ...................................4, 5 MELODIC MINOR ..........................35 MELODIC MINOR 5th ....................35 MELODY ........................................35 MESSAGE SW (Message Switch) .......................84 Metronome .....................................89 MIDI Settings ..................................82 RELES. (Release) ..........................13 P REMOVE EVENT ...........................32 P.A.T. (Performance assistant) ...... 42 Rename (Registration) ....................65 Panel Setups .................................. 65 REPEAT MODE ..............................41 Panning .......................................... 71 Repeat settings ...............................41 Parameter Lock .............................. 89 REPERTOIRE ................................22 PART OCTAVE .............................. 12 REPLACE .......................................64 PART ON/OFF ............................... 20 Re-Recording ..................................52 PEDAL ........................................... 78 Reset ..............................................94 Pedal .............................................. 78 RESP (Response) ..........................16 CVP-601 Reference Manual 97 RESTORE ...................................... 93 Sweet! ...............................................3 VOLUME (Voice Set) ..................... 11 REVERB ........................................ 74 SWING ...........................................30 VOLUME/ATTACK ......................... 16 REVERB DEPTH (Voice Set) ........ 14 SYNCHRO STOP WINDOW ..........20 Rhythm ........................................... 17 SYS/EX. (MIDI) ...............................84 Rhythmic Feel ................................ 30 SYS/EX. (Song Creator) .................58 ROOT FIXED ................................. 35 System Exclusive Events ..........57, 58 ROOT TRANS ............................... 35 SYSTEM RESET ............................94 RTR (Retrigger Rule) ..................... 37 W WERCKMEISTER, KIRNBERGER .. 9 Y T S Tap .................................................89 S.Articulation! ................................... 3 TEMPO (Style Setting) ...................20 Scale ................................................ 8 Tonal Balance .................................71 SCALE TUNE .................................. 8 TOUCH LIMIT ...................................7 SCORE .......................................... 38 TOUCH SENSE (Voice Set) ...........11 SECTION SET ............................... 20 Touch Sensitivity ............................11 SETUP (Song Creator) .................. 56 TRANSMIT CLOCK ........................84 SFX .................................................. 4 TRANSPOSE ...................................9 SINGLE FINGER ........................... 18 Transpose .........................................9 SOFT ............................................. 79 TRANSPOSE (Mixing Console) ......73 Song ............................................... 38 TRANSPOSE ASSIGN .....................9 SONG (Transpose) .......................... 9 TUNE ..............................................73 SONG AUTO OPEN ...................... 92 Tuning ...............................................8 Song Creator .................................. 45 Tuning (Mixing Console) .................73 Song Recording via MIDI ............... 45 TUNING CURVE ............................11 Your Tempo ................................... 43 SONG SETTING ............................ 41 SOSTENUTO ................................. 79 SOUND .......................................... 13 Source Pattern ............................... 33 SPEAKER ...................................... 90 U USB Audio ......................................60 Utility ...............................................88 Speaker .......................................... 90 SPEED ............................................. 7 V SPLIT POINT ................................. 21 VARIATION (DSP) ..........................14 Split Point ....................................... 21 VELOCITY CHANGE ......................32 START/STOP (MIDI) ...................... 84 Velocity Sensitivity ..........................11 Step Recording (Song Creator) ..... 45 VERSION .......................................93 Step Recording (Style Creator) ...... 28 VIB. SPEED ....................................16 STOP ACMP .................................. 19 VIBE ROTOR .................................14 STRENGTH ............................. 31, 55 VIBRATO ........................................13 STRING RESONANCE .................. 11 Voice .................................................3 STROKE ........................................ 36 Voice (Mixing Console) ...................72 Style ............................................... 17 Voice Characteristics ........................3 Style Assembly .............................. 28 VOICE EFFECT ...............................6 STYLE CREATOR ......................... 24 VOICE SET ....................................10 Style Creator .................................. 24 Voice Set ........................................10 Style File Format Settings .............. 33 VOL (Organ Flutes) ........................16 STYLE SETTING ........................... 19 VOL/VOICE ....................................71 STYLE TOUCH .............................. 20 VOLUME (Harmony/Echo) ...............7 SUSTAIN ....................................... 79 Volume (Mixing Console) ................71 SUSTAIN SAMPLE ........................ 11 VOLUME (Pedal) ............................79 98 CVP-601 Reference Manual U.R.G., Digital Musical Instruments Division © 2012 Yamaha Corporation 211MW-A0