Sharp 20F650 Manual de usuario
- Categoría
- Televisores CRT
- Tipo
- Manual de usuario
Este manual también es adecuado para
Products that have earned the ENERGY STA R
®
are designed to protect the
environment through superior energy efficiency.
COLOR TELEVISION
MODEL
20F650
L OPERATION MANUAL L
B731 WJ
CONTENTS
PAG E
• IMPORTANT INFORMATION/IMPORTANT
SAFEGUARDS .................................................. 2 ~ 4
• Supplied Accessories .............................................. 5
• Before Operating Your Television ............................. 5
• Antenna Connections ........................................ 5 ~ 6
• Quick Reference Control Operation ................... 7 ~ 8
• EZ SETUP during First Use ..................................... 9
• Demo Mode ........................................................... 10
• Accessing the MAIN MENU screen without
Remote Control ...................................................... 10
• Language ............................................................... 11
• Sleep Timer ........................................................... 12
• Video Adjust .......................................................... 13
• Audio Adjust........................................................... 14
• Audio Select................................................... 15 ~ 16
MTS (Multichannel TV Sound) ............................ 15
SPEAKER (Internal Speaker Switch) ................. 15
FAO (Fixed Audio Output) ................................... 15
PAG E
• Closed Caption ...................................................... 17
• Parental Control ............................................. 18 ~ 28
V-CHIP Operation ....................................... 18 ~ 25
VIEW TIMER .............................................. 26 ~ 28
• Ch Setup ........................................................ 29 ~ 34
EZ Setup ............................................................. 29
Channel Setting .......................................... 30 ~ 32
Personal Preference ........................................... 33
Universal Plus Function ...................................... 34
• Set Up ............................................................ 35 ~ 37
Energy Save ....................................................... 35
Blue Screen ........................................................ 36
Auto Input ........................................................... 37
• Using the Video and Audio Input Jacks ......... 38 ~ 39
• Using the Audio Output Jacks ............................... 40
• Operation of Universal Remote Control ......... 41 ~ 44
• Before Calling for Service ...................................... 45
• Calling for Service ................................................. 45
• Specifications ........................................................ 46
• Limited Warranty .................................................... 59
This operating manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 47 ~ 52.
FRENCH is on page 53 ~ 58.
20F650[01-04].p65 10/12/04, 8:11 AM1
2
Dimension: 140mm x 215mm
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to operate this
equipment.
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries
Alliance:www.eiae.org
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
IMPORTANT INFORMATION
There are two important reasons for prompt warranty registration of your new SHARP television set. Use
the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.”
Model No.:
Serial No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
20F650[01-04].p65 9/12/04, 1:37 PM2
3
Dimension: 140mm x 215mm
IMPORTANT INFORMATION (Continued)
CAUTION:
• Do not place the AC power cord under the TV set or other heavy items.
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with
liquids, such as vases, should be placed on the product.
IMPORTANT SAFEGUARDS
CAUTION: Please read all of these instructions before you operate your television and save
these instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable
operation of the television equipment and to protect it from overheating, these openings must not be blocked
or covered. This television equipment should not be placed in a built-in insulation such as a bookcase
unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat
this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
20F650[01-04].p65 9/12/04, 1:37 PM3
4
Dimension: 140mm x 215mm
IMPORTANT SAFEGUARDS (Continued)
13. Follow all warnings and instructions marked on the television equipment.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the
National Electrical Code provides information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
15. For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of
any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions as improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance — this indicates a need for
service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
NEC - NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND CLAMPS
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC PART 250, PART H)
20F650[01-04].p65 9/12/04, 1:37 PM4
5
Dimension: 140mm x 215mm
Supplied Accessories
321
654
987
100
0
TV • CATV • VCR • DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
Infrared Remote Control Dry batteries size “AA”/
1.5 V cc
Before Operating Your Television
Location
• For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys
using magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
Note:
• If the set is not going to be used for a long period, such as during a vacation, unplug the set from the
wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located
near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn
off either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
•
With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries
(size “AA”/1.5 V cc). Be sure to match the battery
e
/
d
terminals with the
e
/
d
marks inside the compartment.
Baterry
Cover
Pull up
Antenna Connections
Antennas
• The antenna requirements for good color television reception are more important than those for black
& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
1. A 75 ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).
2. A 300 ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300/75-ohm
ADAPTOR (not supplied).
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
20F650[05-08].p65 12/1/05, 5:09 PM5
6
Dimension: 140mm x 215mm
Antenna Connections (Continued)
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connecting to an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.
PR
PB
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
REAR PANEL
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
A. Combination VHF/UHF Antennas
300/75-ohm
ADAPTOR
(Not supplied)
or
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
REAR PANEL
B. Separate VHF/UHF Antenna
NOTICE
F-type connector should be finger-tightened only
When connecting the RF cable to the TV set, do not tighten
F-type connector with tools.
If tools are used, it may cause damage to your TV set.
(The breaking of Internal circuit, etc.)
F-type connector
75-ohm coaxial cable
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by
the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied): You can view all unscrambled channels using the TV’s
channel keys.
“B” position on the RF switch (not supplied): You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
OUT
OUT
RF switch (not supplied)
Cable TV Line
IN
Two-set
signal
splitter
(not
supplied)
Cable TV converter/
descrambler
(not supplied)
A
IN
B
Note:
•
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
20F650[05-08].p65 9/12/04, 1:37 PM6
7
Dimension: 140mm x 215mm
POWER
Press → On.
Press again → Off.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
REMOTE CONTROL
SENSOR
VIDEO/AUDIO IN 2
TERMINALS
(INSIDE DOOR)
Quick Reference Control Operation
• Part Names
Front Panel
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
ANTENNA/CABLE INPUT TERMINAL
LINE OUT TERMINALS
VIDEO/AUDIO TERMINALS (IN 1)
COMPONENT TERMINALS (IN 1)
Rear Panel
To open the door
Using the projection located under the “PULL-OPEN” indication,
pull and lift the door open.
To close the door
Using the projection, lower the door until closed.
Caution:
• When opening or closing the door, do not insert your fingers
into the gap between the door and front panel. This may result
in an injury.
20F650[05-08].p65 12/1/05, 5:09 PM7
8
Dimension: 140mm x 215mm
Basic Remote Control Functions
321
654
987
100
0
TV • CATV • VCR • DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
POWER
Press → On.
Press again → Off.
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
Press CATV/DVD, sends power and
channel select commands to a cable
TV converter and DVD control.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
POWER (DVD/VCR)
Press → On.
Press again → Off.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories
A, B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 33.)
DISPLAY
Press → Displays receiving channel
for four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press → Switch to external video
INPUT 1 mode or COMPONENT mode.
Press 2 times → Switch to external
video INPUT 2 mode.
Press 3 times → Switch back to the
original TV mode. See page 39.
ENTER
Used in some instances where a
Cable Converter Box requires an
“enter” command after selecting
channels, when using the REMOTE
KEYPAD button. (See page 41)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 30 ~ 32 for channel
presetting.
• Moves the “ a ” mark of the MENU
screens.
SKIP/VCR-CH
DVD/VCR CONTROL
See page 41.
REC
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark
display on the remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
Quick Reference Control Operation (Continued)
• Part Names
20F650[05-08].p65 9/12/04, 1:37 PM8
9
Dimension: 140mm x 215mm
L When you turn on the TV for the first time, it will automatically
memorize the broadcast channels.
Please perform the following instructions before pressing the
POWER button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 5 ~ 6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press
POWER
on the TV set or on the Remote Control to turn on
the TV. The SELECT LANGUAGE mode will be displayed.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANCAIS)”.
3 Press
VOL (+)
or
(–)
to SET LANGUAGE and access EZ SETUP
mode.
4 Press
VOL (+)
.
The tuner will automatically search for the
broadcast and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press
VOL (–)
and it will be canceled.
If you want to SETUP again, please refer to page
29 on CH SETUP.
To cancel EZ SETUP
Press
VOL (–)
.
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Note:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 30 for more
information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occuring around the area. Please refer to pages 30 ~ 32 for more
information on manually memorizing the channels using CHANNEL SETTING.
8 / 9
SE
LLAANG GEUECT
E
NGL SHI
E
SPA OLÑ
F
RAN A SIC
S
ELE T CH:
S
ET VOL+ / –:
C
8 / 9
SE
LLAANG GEUECT
E
NGL SHI
E
SPA OLÑ
F
RAN A SIC
S
ELE T CH:
S
ET VOL+ / –:
C
CO
NTANNT NA ORENE
CA
BLE
C
S
T
E
ZART
S
ETUP?
S
TOP S ARTT
PL
EWAITASE
A
U
R
OG GTO P
5
21
R
AMM I N
S
TOP S ARTT
2
;
:
VOL
–
VOL
+
321
654
987
100
0
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
POWER
POWER
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
(EZ SETUP mode)
EZ SETUP during First Use
(On the Set)
(Remote Control)
(SELECT LANGUAGE mode)
CH
8
9
CH
(START)
:
VOL
+
(STOP)
;
VOL
–
20F650[09-13].p65 9/12/04, 1:38 PM9
10
Dimension: 140mm x 215mm
Demo Mode
• To quickly learn more about the TV set, press and hold for
more than three seconds both
CH UP (
8
)
and
DOWN (
9
)
or
MENU
on the TV set. The TV set will go into DEMO mode and
briefly explain the various features.
• To cancel DEMO mode, again press and hold for more than
three seconds both
CH UP (
8
)
and
DOWN (
9
)
or
MENU
on
the TV set.
Example:
DEMO mode display
Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control you can still access most settings via
the MAIN MENU screen when you press
MENU
on the TV set.
• Some features of your TV set will not be accessible without the Remote Control.
If you lost your Remote Control, contact a Sharp Service Center for a
replacement.
(On the Set)
CHANNEL
UP (
8
)/
DOWN (
9
)
buttons
(On the Set)
MENU
button
MENU
button
or
20F650[09-13].p65 9/12/04, 1:38 PM10
11
Dimension: 140mm x 215mm
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “SETUP”.
3 Press
VOL (+)
or
(–)
to access SETUP screen, then press
CH UP
(
8
)
or
DOWN (
9
)
to move the “a” mark to “LANGUAGE”.
4 Press
VOL (+)
or
(–)
to access LANGUAGE change mode.
5 Press
CH UP (
8
)
or
DOWN (
9
)
to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANCAIS)”.
6 Press
MENU
to exit.
Language
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
SET PU
LANG GUA E
ENERGY SAVE
BLUE SCREE
AUTO I NPUT
N
L
ENGL HIS
ANG GUA E
ESPAÑOL
FRAN A ICS
(SETUP mode)
(LANGUAGE change mode)
I
ENGL HIS
DIOMA
ESPAÑOL
FRAN A ICS
MENU
CH
8
9
CH
;
:
VOL
–
VOL
+
CH
8
9
CH
;
:
VOL
–
VOL
+
MENU
→
CH
8
9
CH
20F650[09-13].p65 9/12/04, 1:38 PM11
12
Dimension: 140mm x 215mm
L You can preset your television to turn off automatically in increments of 30, 60, 90 or 120
minutes.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
VOL (+)
or
(–)
to access SLEEP TIMER mode.
3 Press
VOL (+)
or
(–)
to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press
MENU
to exit.
Note:
• To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”
during step 3.
• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the remote’s DISPLAY key is pressed.
Sleep Timer
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
SLEEP T I MER
12 M0AREM NI
(SLEEP TIMER mode)
;
:
VOL
–
VOL
+
→
MENU
;
:
VOL
–
VOL
+
MENU
20F650[09-13].p65 9/12/04, 1:38 PM12
13
Dimension: 140mm x 215mm
Description of Adjustment Items
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “VIDEO
ADJUST”.
3 Press
VOL (+)
or
(–)
to access PICTURE adjust mode.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to select the desired mode.
(Refer to the diagram below.)
5 Press
VOL (+)
or
(–)
to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press
MENU
to exit.
Note:
• VIDEO ADJUST setting is available for AIR or CABLE/INPUT 1/INPUT 2 and COMPONENT respectively.
Video Adjust
Selected VOL UP (+) button VOL DOWN (–) button
item
PICTURE To increase contrast To decrease contrast
TINT To make skin tones greenish To make skin tones purplish
COLOR To increase color intensity To decrease color intensity
BRIGHT To increase brightness To decrease brightness
SHARP To increase sharpness To decrease sharpness
COLOR To choose a MH, HIGH, LOW or ML COLOR TONE.
TEMP.
RESET To return all adjustments to factory preset levels.
321
654
987
100
0
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
PICTURE
_______
27
VOL UP (+)
increase contrast
PICTURE
TINT
COLOR
SHARP
COLOR TEMP.
RESET
: CH DOWN (9)
: CH UP (8)
BRIGHT
PICTURE
_______
27
VOL DOWN (–)
decrease contrast
→
CH
8
9
CH
MENU
;
:
VOL
–
VOL
+
CH
8
9
CH
;
:
VOL
–
VOL
+
MENU
(PICTURE adjust mode)
20F650[09-13].p65 9/12/04, 1:38 PM13
14
Dimension: 140mm x 215mm
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “AUDIO
ADJUST”.
3 Press
VOL (+)
or
(–)
to access TREBLE adjust mode.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to select the desired mode.
(Refer to the diagram below.)
5 Press
VOL (+)
or
(–)
to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press
MENU
to exit.
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
Audio Adjust
(MAIN MENU screen)
Selected item VOL UP (+) button VOL DOWN (–) button
TREBLE To increase treble response To decrease treble response
BASS To increase bass response To decrease bass response
BALANCE To emphasize the right speaker’s volume To emphasize the left speaker’s volume
RESET To return all adjustments to factory preset levels.
→
CH
8
9
CH
MENU
TRE E 0BL
(TREBLE adjust mode)
TREBLE
RESET
BASS
BALANCE
TRE E 0BL
;
:
VOL
–
VOL
+
CH
8
9
CH
;
:
VOL
–
VOL
+
MENU
20F650[14-18].p65 9/12/04, 1:39 PM14
15
Dimension: 140mm x 215mm
Audio Select
L MTS (Multichannel TV Sound)
This circuit allows reception of stereo or bilingual TV sound.
L SPEAKER (Internal Speaker Switch)
This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from
external speakers by using the AUDIO OUTPUT JACKS on page 40.
L FAO (Fixed Audio Output)
This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the
AUDIO OUTPUT JACKS on page 40. With FAO, the TV’s volume control is disabled.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “AUDIO
SELECT”.
3 Press
VOL (+)
or
(–)
to access AUDIO SELECT mode.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “MTS”,
“SPEAKER” or “FAO”.
5 Press
VOL (+)
or
(–)
to select “STEREO”, “SAP” or “MONO” when
the “a” mark is at “MTS” position.
6 Press
MENU
to exit.
Ex: Actual screen indicating ON AIR when receiving STEREO
broadcasts
Actual channel number
“← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP broadcasts.
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
AUD I O SELECT
MTS : SAP
FAO F:O F
SPEAKER : ON
(AUDIO SELECT mode)
AUD I O SELECT
MTS :STEREO
FAO F:O F
SPEAKER : ON
MTS
STEREO
SAP
MONO
SPEAKER
ON
OFF
FAO
ON
OFF
MENU
12
STE EO ON A I RR
MONO
SAP ON A I R
(CHANNEL call on screen)
MENU
→
CH
8
9
CH
CH
8
9
CH
(AUDIO SELECT mode)
→
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
20F650[14-18].p65 9/12/04, 1:39 PM15
16
Dimension: 140mm x 215mm
Audio Select (Continued)
L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
• Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo
sound.
• SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L If stereo sound is difficult to hear.
• You can obtain clearer sound by manually switching to the fixed monaural mode.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• MTS while in the INPUT mode does not change the type of sound; in this case, sound is determined
by the video source.
• If the “FAO” mode is selected “ON”, the “SPEAKER” mode will automatically turn “OFF”.
“SPEAKER” selecting will not affect “FAO” mode.
20F650[14-18].p65 9/12/04, 1:39 PM16
17
Dimension: 140mm x 215mm
Closed Caption
L HOW TO SET CLOSED CAPTION
• Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows you to view conversations, narration,
and sound effects in TV programs and home videos as subscript on
your TV screen as shown on the right.
• Not all the programs and videos will offer closed caption. Please look
for the “ ” symbol to ensure that captions will be shown.
• Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2:
The CAPTION mode subscripts dialogues and commentaries of TV
dramas and news programs while allowing clear view of the picture.
The TEXT mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “CLOSED
CAPTION”.
3 Press
VOL (+)
or
(–)
to access CLOSED CAPTION setting mode.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to either
“MODE” or “DATA”.
5 Press
VOL (+)
or
(–)
to change the CLOSED CAPTION setting.
MODE: DATA:
6 Press
MENU
to exit.
Note:
•
If a broadcast has CLOSED CAPTION and the
MUTE
button is pressed, the set enters CAPTION mode
automatically. Pressing
MUTE
again will return the set to its previous condition.
•
CLOSED CAPTION may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if
there are problems at the broadcast source. This does not necessarily indicate a problem with your TV.
•
If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the
CLOSED CAPTION will disappear momentarily.
•
When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen may
become dark and blank. Should this occur, set the CLOSED CAPTION mode to “OFF”.
9
VCR-CH
8
POWER (DVD/VCR)
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ABCD
PERSONAL PREFERENCE
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
CH
8
9
CH
→
MENU
CLOSED CAPT I ON
MODE : CAP
DATA : CH1
TION
(CLOSED CAPTION setting mode)
;
:
VOL
–
VOL
+
CLOSED CAPT I ON
MODE : CAP
DATA : CH1
TION
CH
8
9
CH
CAPTION
TEXT
OFF
CH 1
CH 2
CLOSED CAPT I ON
MODE : CAP
DATA : CH1
TION
;
:
VOL
–
VOL
+
MENU
20F650[14-18].p65 9/12/04, 1:39 PM17
18
Dimension: 140mm x 215mm
Note:
• MPAA RATING is only age based ratings.
[2] TV PARENTAL GUIDELINES
RATING
y
content base
x
AGE D L S V FV
(Sexually (Adult (Sexual (Violence) (Fantasy
Suggestive Language) Situation) Violence)
Dialog)
TV-Y (All children) V –––––
TV-Y7 (Direct to Older Children) V ––––V
E
TV-G (General Audience) V –––––
Age TV-PG (Parental Guidance
VV V V V –
based Suggested)
D
TV-14 (Parents Strongly
VV V V V –
Cautioned)
TV-MA (Mature Audience Only) V – VVV –
V : Content Rating can be set.
– : Content Rating cannot be set (not normally broadcast by TV station).
Parental Control (V-CHIP Operation)
L V-CHIP
• This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
• Restriction of TV programs includes two characters that contain information about the program’s
MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are
restricted by age and contents.
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G GENERAL AUDIENCES. All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
age PG-13 PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate
based for children under 13.
R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
X X Rating is an older rating that is unified with NC-17 but may be encoded on
older movie’s data.
• MPAA RATING (Example)
Example 1.
“PG-13” in the age based RATING is blocked,
this will automatically block the higher ratings
“R”, “NC-17”, “X” also.
Example 2.
“R” in the age based RATING is blocked, this
will automatically block the higher rating “NC-
17”, “X” also.
1. User setting 2. Block table
PG
age
based
not to
block
not to
block
Select
block
auto-
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
– – – – –
– – – – –
BLOCK
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
1. User setting 2. Block table
PG
age
based
not to
block
not to
block
not to
block
Select
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
– – – – –
– – – – –
– – – – –
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
20F650[14-18].p65 9/12/04, 1:39 PM18
19
Dimension: 140mm x 215mm
Parental Control (V-CHIP Operation) (Continued)
• TV-PARENTAL GUIDELINES (Example)
Example 1.1 : Age Based setting
Go through all select ratings and select unblocked for “AGE”.
This will automatically unblock everything.
Example 1.2 : Age Based setting
For “TV-G” select “BLOCK” for “AGE”. This will automatically block the
higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as
“TV-G”.
Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are automatically
blocked as well for “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.
Example 2.1 : Content Based setting
For “TV-PG”, “TV-14” and “TV-MA” select unblocked for each content
ratings (“D”, “L”, “S”, “V”, “FV”) by leaving “AGE” unblocked for
“TV-PG”, “TV-14” and “TV-MA”. If you choose to unblock for each one in
content base.
Example 2.2 : Content Based setting
Then for “TV-PG” and select “BLOCK” for only “V” (Violence). This will
automatically block the higher ratings “TV-14-V” and “TV-MA-V”
(“TV-14” and “TV-MA” for Violence content only).
Please note that with these settings blocking does NOT occur. If a program
is rated only “TV-MA”; it must be rated “TV-MA-V” to be blocked.
Example 3 : Reset an Age Based setting
For “TV-14” and select again “BLOCK” for “AGE”.
This will again automatically block the content ratings “D”, “L”, “S”, “V”,
“FV” for “TV-MA” as well as “TV-14”.
Please note that the lower age rating “TV-PG” did not change from its
previous settings.
Note:
• Content ratings can be modified but only in the combinations indicated by an V in the table on page
18.
• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher
age rating’s content setting to “BLOCK” regardless of their previous settings.
• Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK”
regardless of their previous settings.
• Any rating’s “AGE” set to unblocked must have its content settings individually set.
[3] ADDITIONAL MODE
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES” new ratings system’s data
can be downloaded when they become available. (See page 22.)
EDLSVFVGA
TV– Y7
––––
–
–
–
–
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
EDLSVFVGA
TV– Y7
––––
V
V V V V V –
V V V V –
–
V V V –
V
V
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
EDLSVFVGA
TV– Y7
––––
–
–
–
–
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
EDLSVFVGA
TV– Y7
––––
V –
V –
–
V –
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
EDLSVFVGA
TV– Y7
––––
–
V V V V –
–
V V V –
V
V
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
20F650[19-23].p65 9/12/04, 1:40 PM19
20
Dimension: 140mm x 215mm
Parental Control (V-CHIP Operation) (Continued)
L HOW TO SET V-CHIP
[1] MPAA RATING
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to
“PARENTAL CONTROL”.
3 Press
VOL (+)
or
(–)
to access PARENTAL CONTROL mode.
4 Press
VOL (+)
or
(–)
to access V-CHIP BLOCK select mode, then
press
VOL (+)
or
(–)
to select “MPAA RATING”.
5 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “PG”,
then press
VOL (+)
or
(–)
to select BLOCK. If you set “PG” to
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.
6 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to "RETURN",
then press
VOL (+)
or
(–)
to exit V-CHIP BLOCK select mode.
Note:
Ex.
• If you set “G” to BLOCK , all RATING are automatically blocked.
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.
(MAIN MENU screen)
MENU
→
CH
8
9
CH
(PARENTAL CONTROL mode)
→
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
321
654
987
100
0
FLASHBACK
ENTER
9
VCR-CH
8
POWER (DVD/VCR)
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ABCD
PERSONAL PREFERENCE
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
REMOTE
KEYPAD
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
PARENT CONTOLAL
V – CH I P BLOCK
VIEW TIMER
V – CH I P OCKLB
MPAA
TV UGI
OP OINT
DEL I NES
SEC ERT ––No .
STA UTSO:FF
: ––
(V-CHIP BLOCK select mode)
MPAA
G
PG
PG 31–
R
N
X
–
B
B
B
B
B
:
:
:
:
:
:
–
O
O
O
O
O
–
C
C
C
C
C
–
K
K
K
K
K
–
L
L
L
L
L
C – 71
RET RNU
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
→
CH
8
9
CH
MPAA
G
PG
PG 31–
R
N
X
–
B
B
B
B
B
:
:
:
:
:
:
–
O
O
O
O
O
–
C
C
C
C
C
–
K
K
K
K
K
–
L
L
L
L
L
C – 71
RET RNU
;
:
VOL
–
VOL
+
→
CH
8
9
CH
20F650[19-23].p65 9/12/04, 1:41 PM20
21
Dimension: 140mm x 215mm
Parental Control (V-CHIP Operation) (Continued)
[2] TV GUIDELINES
1 Repeat steps 1 to 3 of [1] MPAA RATING.
2 Press
VOL (+)
or
(–)
to access V-CHIP BLOCK select mode, then
press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “TV
GUIDELINES”.
3 Press
VOL (+)
or
(–)
to access TV GUIDELINES mode.
4 To change CONTENT SETTING, press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to the desired rating and then press
VOL (+)
or
(–)
to select.
5 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to the desired
content and then press
VOL (+)
or
(–)
to select either “BLOCK” or
unblock (“– – – – –”).
6 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to "RETURN",
then press
VOL (+)
or
(–)
to return to TV GUIDELINES mode.
7 Repeat steps 4 to 5 until all ratings and their contents are set.
8 When done, press
MENU
to exit.
V – CH I P OCKLB
MPAA
TV UGI
OP OINT
DEL I NES
SEC ERT ––No .
STA UTSO:FF
: ––
(V-CHIP BLOCK select mode)
CH
8
9
CH
;
:
VOL
–
VOL
+
EDLSVFVGA
TV– Y7
V
V––––
V
V V V V V –
V V V V –
–
V V V –
V
V
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
(TV GUIDELINES mode)
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
→
CH
8
9
CH
TV– Y7
AGE
D
L
S
V
FV
B
–
–
–
–
B
:
:
:
:
:
:
O
–
–
–
–
O
C
–
–
–
–
C
K
–
–
–
–
K
L
–
–
–
–
L
RET RNU
(CONTENT RATING mode)
;
:
VOL
–
VOL
+
→
CH
8
9
CH
EDLSVFVGA
TV– Y7
––––
V
V V V V V –
V V V V –
–
V V V –
V
V
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
;
:
VOL
–
VOL
+
→
CH
8
9
CH
MENU
→
20F650[19-23].p65 9/12/04, 1:41 PM21
22
Dimension: 140mm x 215mm
→
Parental Control (V-CHIP Operation) (Continued)
[3] ADDITIONAL MODE (DOWNLOAD)
There will be an additional new rating system. In that case, please set up as follows.
Subsequently the new rating system will set up automatically.
1 Repeat steps 1 to 3 of [1] MPAA RATING.
2 Press
VOL (+)
or
(–)
to access V-CHIP BLOCK select mode, then
press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “OPTION”.
3 Press
VOL (+)
or
(–)
to access OPTION mode, then press
CH UP
(
8
)
or
DOWN (
9
)
to move the “a” mark to “DOWNLOAD”, then
press
VOL (+)
or
(–)
to “DOWNLOAD : ON”.
4 Press
MENU
to exit.
• DOWNLOAD V-CHIP DATA
1 If you watch the program containing “New Rating System Data”,
the DOWNLOAD screen will be displayed.
2 The DOWNLOAD screen will disappear, once downloading is
finished.
Note:
• DOWNLOAD will not start, if you do not watch a program containing “New Rating System Data”.
V – CH I P OCKLB
MPAA
TV UGI
OP OINT
DEL I NES
SEC ERT ––No .
STA UTSO:FF
: ––
(V-CHIP BLOCK select mode)
CH
8
9
CH
;
:
VOL
–
VOL
+
OPT I ON
DOWNLO
RETURN
AD : ON
(OPTION mode)
;
:
VOL
–
VOL
+
CH
8
9
CH
;
:
VOL
–
VOL
+
→→
MENU
321
654
987
100
0
FLASHBACK
ENTER
9
VCR-CH
8
POWER (DVD/VCR)
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ABCD
PERSONAL PREFERENCE
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
REMOTE
KEYPAD
PLEASE WA I T
NOW DOWNL OAD I NG
V – CH I P DATA
(DOWNLOAD screen)
20F650[19-23].p65 9/12/04, 1:41 PM22
23
Dimension: 140mm x 215mm
Parental Control (V-CHIP Operation) (Continued)
• How to set Additional mode (Example)
1 Repeat steps 1 to 2 of [3] ADDITIONAL MODE.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “Cdn.
English Ratings”, then press
VOL (+)
or
(–)
.
3 You can select “BLOCK” or “– – – – –” (unblock) from each RATING
mode by pressing
CH UP (
8
)
or
DOWN (
9
)
and
VOL (+)
or
(–)
.
4 You can select “BLOCK” or “– – – – –” (unblock) from each RATING
mode by pressing
CH UP (
8
)
or
DOWN (
9
)
and
VOL (+)
or
(–)
if
you select “Cdn. French Ratings” in step 2.
Note:
• In additional mode
Including two types (English mode, French mode), altogether you are able to download 4 different
modes.
OPT I ON
Cdn. Engl ish Rat ings
Cdn . F r ench Ra t i ngs
DOWNLO
RETURN
AD : ON
(After download the rating data)
CH
8
9
CH
;
:
VOL
–
VOL
+
→
C
PG
14+
18+
ANAD I
A
RETUR
N
C
C8+
G
NENGLISH
(
THRES
HO L D B LOCK )
B:LOCK
–: ––––
–: ––––
–: ––––
–: ––––
–: ––––
(ENGLISH THRESHOLD BLOCK
mode)
CH
8
9
CH
;
:
VOL
–
VOL
+
→
C
ANAD I
A
RETUR
N
G
8ans+
31ans+
61ans+
81ans+
N FRENCH
(
THRES
HO L D B LOCK )
B:LOCK
–: ––––
–: ––––
–: ––––
–: ––––
(FRENCH THRESHOLD BLOCK
mode)
CH
8
9
CH
;
:
VOL
–
VOL
+
→
20F650[19-23].p65 9/12/04, 1:41 PM23
24
Dimension: 140mm x 215mm
Parental Control (V-CHIP Operation) (Continued)
L Turning On (Activating) the V-Chip Blocks
1 Repeat steps 1 to 3 of [1] MPAA RATING.
2 Press
VOL (+)
or
(–)
to access V-CHIP BLOCK select mode, then
press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “SECRET
No.”.
3 Enter a 4-digit SECRET No. using the
REMOTE KEYPAD
.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “STATUS”,
then press
VOL (+)
or
(–)
to activate the V-CHIP BLOCK. (If STATUS
is OFF, V-CHIP BLOCK will not operate.)
5 When done, press
MENU
to exit.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you view a
program containing Program Rating data as same as you
configured.
Note:
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is
not configured to “ON”.
2 Press
MENU
, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
, then
V-CHIP BLOCK temporarily will be canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
Note:
• If you turn the power from OFF, the V-CHIP BLOCK will automatically reset to ON again.
V – CH I P OCKLB
MPAA
TV UGI
OP OINT
DEL I NES
SEC ERT ––No .
STA UTSO:FF
: ––
(V-CHIP BLOCK select mode)
CH
8
9
CH
;
:
VOL
–
VOL
+
V – CH I P OCKLB
MPAA
TV UGI
OP OINT
DEL I NES
SEC ERT 34No .
STA UTSO:FF
:12
;
:
VOL
–
VOL
+
→
CH
8
9
CH
MENU
→
321
654
987
0
V – CH I P OCKLB
MPAA
TV UGI
OP OINT
DEL I NES
SEC ERT 34No .
STA UTSO:FF
:12
MENU
23
V – CIHP
AC VIAETDT
HAS BEEN
TV– Y7
FV
INP TUS
––––
EECR T oN.
INP TUSEECR T oN.
∗∗∗∗
321
654
987
0
20F650[24-28].p65 9/12/04, 1:41 PM24
25
Dimension: 140mm x 215mm
Parental Control (V-CHIP Operation) (Continued)
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)
1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET
No.” will be displayed.
2 Enter the 4-digit “INPUT SECRET No.” using the
REMOTE
KEYPAD
and the V-CHIP select mode will be displayed. Repeat
configuration of the V-CHIP BLOCK.
L If you forget or need to change your Secret No., clear the original Secret No. and set up a
new one.
1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [L To cancel
the V-CHIP BLOCK screen while V-CHIP BLOCK has been
activated], then “INPUT SECRET No.” will be displayed.
2 Press and hold both
VOL (+)
and
CH UP (
8
)
on the TV set
simultaneously until the message “INPUT SECRET No.” disappears.
3 Press the
MENU
button to exit.
INP TUS
––––
EECR T oN.
INP TUSEECR T oN.
∗∗∗∗
(On the Set)
VOL (+)/CH UP (
,
)
buttons
MENU
321
654
987
0
20F650[24-28].p65 9/12/04, 1:41 PM25
26
Dimension: 140mm x 215mm
Parental Control (VIEW TIMER)
L VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration acquired while the TV is on.)
• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10
hours) in 30 minutes intervals.
OFF TIME (Restricts TV watching after the VIEWING TIME reaches
zero.)
• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours) in
30 minutes intervals.
STATUS (ON/OFF setting of VIEW TIMER)
L How to set VIEW TIMER.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to
“PARENTAL CONTROL”.
3 Press
VOL (+)
or
(–)
to access PARENTAL CONTROL mode.
4 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “VIEW
TIMER”.
5 Press
VOL (+)
or
(–)
to access VIEW TIMER mode.
6 Press
CH UP (
8
)
or
DOWN (
9
)
to select “VIEWING TIME” and
“OFF TIME”. For each selection, press
VOL (+)
or
(–)
to set the
time duration.
7 Press
CH UP (
8
)
or
DOWN (
9
)
to select “SECRET No.”. Enter a
4-digit SECRET No. using
REMOTE KEYPAD
.
8 Press
CH UP (
8
)
or
DOWN (
9
)
to select “STATUS”. Press
VOL (+)
or
(–)
to turn ON the “VIEW TIMER”. (If STATUS is OFF,
VIEW TIMER will not operate.)
CH
8
9
CH
;
:
VOL
–
VOL
+
→
→
VIEW ITREM
VIEWING TIME
– H–
OF ITMFE
––M
– H–––M
SEC ERT :–– ––No .
STA UTSO:FF
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
→
CH
8
9
CH
MENU
PAREN ATCOLNRTOL
V-CHIP BLOCK
EIVTWIMER
(PARENTAL CONTROL mode)
VIEW ITREM
VIEWING TIME
– H–
OF ITMFE
––M
– H–––M
SEC ERT :–– ––No .
STA UTSO:FF
(VIEW TIMER mode)
;
:
VOL
–
VOL
+
VIEW ITREM
VIEWING TIME
H2
OF ITMFE
00M
– H–––M
SEC ERT :–– ––No .
STA UTSO:FF
;
:
VOL
–
VOL
+
CH
8
9
CH
VIEW ITREM
VIEWING TIME
H2
OF ITMFE
00M
H500M
SEC ERT :–– ––No .
STA UTSO:FF
321
654
987
0
→
CH
8
9
CH
VIEW ITREM
VIEWING TIME
H2
OF ITMFE
00M
H500M
SEC ERT :1243No .
STA UTSO:N
;
:
VOL
–
VOL
+
CH
8
9
CH
→
20F650[24-28].p65 9/12/04, 1:41 PM26
27
Dimension: 140mm x 215mm
Parental Control (VIEW TIMER) (Continued)
9 Press
MENU
to exit.
Example
• To restrict anybody from watching the TV for 5 hours, after watching
the TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish. For
example, they could watch 1 hour of TV, turn TV off for 30 minutes,
then turn TV on and watch the remaining 1 hour on the VIEWING
TIMER.
L To change the VIEW TIMER settings. (SECRET No. is registered)
1 Repeat “How to set VIEW TIMER” steps and select “PARENTAL
CONTROL VIEW TIMER” during step 3. Press
VOL (+)
or
(–)
, and
“INPUT SECRET No.” will be displayed.
2 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
, and
the VIEW TIMER mode will be displayed. Repeat step
6 ~ 9
.
Note:
• When you choose the correct SECRET No., the VIEW TIMER mode is
displayed. If the wrong SECRET No. is chosen, “SECRET No. IS
INCORRECT” is displayed. Input the SECRET No. again in this case.
L To cancel the VIEW TIMER (While the TV set is OFF but the VIEW
TIMER is set)
1 Turn on TV; a blue screen message “TIME OVER” will appear. If
you do nothing, the TV will turn off in approximately 30 seconds.
2 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
. When
you choose the correct SECRET No., the VIEW TIMER is canceled.
If the wrong SECRET No. is chosen, “SECRET No. IS INCORRECT”
is displayed. Input the SECRET No. again in this case.
L To cancel the VIEW TIMER setting or change the SECRET No.
(When you forget the SECRET No.)
1 Repeat “How to set VIEW TIMER” steps and select “PARENTAL
CONTROL VIEW TIMER” during step 3. Press
VOL (+)
or
(–)
, and
“INPUT SECRET No.” will be displayed.
MENU
VIEW ITREM
VIEWING TIME
H2
OF ITMFE
00M
H500M
SEC ERT :1243No .
STA UTSO:N
INP TUS
––––
EECR T oN.
;
:
VOL
–
VOL
+
VIEW ITREM
VIEWING TIME
H2
OF ITMFE
00M
H500M
SEC ERT :1243No .
STA UTSO:FF
321
654
987
0
SECRET
INCORRECT
No . SI
TI
INPUT TRSE E .NoC
–– ––
ME O EVR
TI
INPUT TRSE E .NoC
ME O EVR
∗∗∗∗
INP TUS
––––
EECR T oN.
321
654
987
0
20F650[24-28].p65 9/12/04, 1:41 PM27
28
Dimension: 140mm x 215mm
Parental Control (VIEW TIMER) (Continued)
2 Press and hold both
VOL (+)
and
CH UP (
8
)
on the TV set
simultaneously until the VIEW TIMER mode is displayed. Now you
can cancel the VIEW TIMER settings or change the SECRET No.
while “INPUT SECRET No.” is displayed.
L Notice of Remaining VIEWING TIME
• For every 30 minute interval, the “remaining time” will be displayed for
4 seconds. For the last 5 minutes, the “remaining time” will be displayed
every minute.
•“0H00M REMAIN” will be displayed for 10 seconds just before the
VIEWING TIME is complete.
(On the Set)
VOL (+)/CH UP (
,
)
buttons
030 RMHEIAM
VEW ITIMRE
N
005 RMHEIAM
VEW ITIMRE
N
000 RMHEIAM
VEW ITIMRE
N
20F650[24-28].p65 9/12/04, 1:41 PM28
29
Dimension: 140mm x 215mm
Ch Setup
L EZ SETUP
By operating the channel preset functions, you can preset your
TV to the desired channels for viewing.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “CH
SETUP”.
3 Press
VOL (+)
or
(–)
to access CH SETUP mode, then press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “EZ SETUP”.
4 Press
VOL (+)
or
(–)
to access EZ SETUP mode.
5 Press
VOL (+)
.
The tuner will automatically search for the broadcasting and cable
TV channels. (The CH No. will automatically increase when it
appears.)
If you want to stop the EZ SETUP process once it has started,
press
VOL (–)
. Search will be canceled.
To cancel EZ SETUP
Press
VOL (–)
.
6 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
(MAIN MENU screen)
→
321
654
987
100
0
FLASHBACK
ENTER
9
VCR-CH
8
POWER (DVD/VCR)
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ABCD
PERSONAL PREFERENCE
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
REMOTE
KEYPAD
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
CH
8
9
CH
MENU
CH ESUPT
AIR AC/BLE
CH MME ORY
CH ASE RCH
PERSONAL PR
EZ TSE UP
EF .
UN I VERSAL P L SU
(CH SETUP mode)
CH
8
9
CH
;
:
VOL
–
VOL
+
→
CON EN
CAB EL
TACNTENNORA
STA ERT TUP?ZSE
STOP S ATRT
(EZ SETUP mode)
;
:
VOL
–
VOL
+
PLE SA
AUT POR
215
OG GRAMM I N
WAEIT
STOP S ATRT
:
VOL
+
2
20F650[29-33].p65 9/12/04, 1:42 PM29
30
Dimension: 140mm x 215mm
Ch Setup (Continued)
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 AIR/CABLE setting
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “CH
SETUP”.
3 Press
VOL (+)
or
(–)
to access CH SETUP mode.
4 Press
VOL (+)
or
(–)
to access AIR/CABLE mode.
5 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to the desired
mode.
6 Press
MENU
to exit.
Note:
• Receivable channels of your TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC mode only)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
CH ESUPT
AIR AC/BLE
CH MME ORY
CH ASE RCH
PERSONAL PR
EZ TSE UP
EF .
UN I VERSAL PL SU
(CH SETUP mode)
AI C/RBELA
AIR
CABLE STD
CA LBEHRC
CABLE CIR
(AIR/CABLE mode)
AI C/RBELA
AIR
CABLE STD
CA LBEHRC
CABLE CIR
(AIR/CABLE mode)
AIR
CABLE STD CABLE HRC CABLE IRC
CH
8
9
CH
→
MENU
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
CH
8
9
CH
MENU
20F650[29-33].p65 9/12/04, 1:42 PM30
31
Dimension: 140mm x 215mm
Ch Setup (Continued)
2 How to save broadcast TV channels into memory.
1.1 Press
MENU
to access the MAIN
MENU screen, then press
CH UP
(
8
)
or
DOWN (
9
)
to move the “a”
mark to “CH SETUP”.
1.2 Press
VOL (+)
or
(–)
to access CH
SETUP mode, then press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark
to “CH SEARCH”.
1.3 Press
VOL (+)
or
(–)
to access CH
SEARCH mode.
START
2.1 Press
VOL (+)
. The tuner will search
through all available channels in your
area and add them into the TV’s
memory.
STOP
2.2 Press
VOL (–)
. CH SEARCH will stop
at the current channel and will not
add any higher channels.
2.3 Press
MENU
to exit.
Note:
• If you press
VOL (+)
again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels will
be lost.
321
654
987
100
0
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
CH ESUPT
AIR/ ACBLE
CH MME ORY
CH ASE RCH
PERSONAL PR
EZ TSE UP
EF .
UN I VERSAL P L SU
(CH SETUP mode)
CH
8
9
CH
→
MENU
CH
8
9
CH
;
:
VOL
–
VOL
+
→
;
:
VOL
–
VOL
+
(START)
:
VOL
+
(STOP)
;
VOL
–
MENU
CH ESRCHA
ARI12
STOP S ATRT
(CH SEARCH mode)
20F650[29-33].p65 9/12/04, 1:42 PM31
32
Dimension: 140mm x 215mm
Ch Setup (Continued)
3 How to add or erase weak, additional or unwanted channels from TV memory.
1 Press
MENU
to access the MAIN MENU screen, then press
CH
UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “CH SETUP”.
2 Press
VOL (+)
or
(–)
to access CH SETUP mode, then press
CH
UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “CH MEMORY”.
3 Press
VOL (+)
or
(–)
to access CH MEMORY mode.
4 Use
CH UP (
8
)
or
DOWN (
9
)
or
REMOTE KEYPAD
to select
each desired channel to add or erase.
5 Press
VOL (+)
to add a channel to the TV’s memory or press
VOL
(–)
to erase a channel from the TV’s memory.
6 Press
MENU
to exit.
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
CH ESUPT
AIR AC/BLE
CH MME ORY
CH ASE RCH
PERSONAL PR
EZ TSE UP
EF .
UN I VERSAL P L SU
(CH SETUP mode)
CH EMORYM
ARI12
EERAS A DD
(CH memory mode)
CH
8
9
CH
→
MENU
CH
8
9
CH
→
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
321
654
987
100
0
ENTER
CH
8
9
CH
or
;
:
VOL
–
VOL
+
MENU
20F650[29-33].p65 9/12/04, 1:42 PM32
33
Dimension: 140mm x 215mm
Ch Setup (Continued)
L PERSONAL PREFERENCE
By setting the PERSONAL PREFERENCE channels in advance,
you can select your favorite channels easily.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to
“CH SETUP”.
3 Press
VOL (+)
or
(–)
to access CH SETUP mode, then press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “PERSONAL
PREFERENCE”.
4 Press
VOL (+)
or
(–)
to select PERSONAL PREFERENCE select
mode in which you can program 4 favorite channels, in 4 different
categories. (total of 16 channels)
5 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to the desired
position.
6 Press
REMOTE KEYPAD
on the Remote to input the CHANNEL
Number into the memory.
Example:
125 — Press “100” followed by “2” and then “5”.
25 — Press “2” and then “5”.
4 — Press “0” and then “4”.
7 Repeat steps 4 to 6 to input the next CHANNEL Number.
8 Press
MENU
to exit.
To select the PERSONAL PREFERENCE channel.
If the channels are memorized as shown to the right,
press the Remote’s “A” button to select the Channels below.
321
654
987
100
0
FLASHBACK
ENTER
9
VCR-CH
8
POWER (DVD/VCR)
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ABCD
PERSONAL PREFERENCE
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
REMOTE
KEYPAD
PERSONAL
PREFERENCE
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
CH ESUPT
AIR AC/BLE
CH MME ORY
CH ASE RCH
PERSONAL PR
EZ TSE UP
EF .
UN I VERSAL P L SU
(SETUP mode)
PER OSPRE.FALN
><A B C D
––– ––– ––– –––
––– ––– ––– –––
––– ––– ––– –––
––– ––– ––– –––
PER OSPRE.FALN
><A B C D
––– ––– ––– –––
––– ––– ––– –––
––– ––– ––– –––
––– ––– ––– –––
(PERSONAL PREFERENCE select mode)
PER OSPRE.FALN
><A B C D
125 ––– ––– –––
––– ––– ––– –––
––– ––– ––– –––
––– ––– ––– –––
→
CH
8
9
CH
MENU
CH
8
9
CH
→
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
CH
8
9
CH
321
654
987
100
0
ENTER
MENU
PER OSPRE.FALN
><A B C D
1258538–––
25 123 30 –––
40 55 ––– –––
4 ––– ––– –––
125 25 40 4
20F650[29-33].p65 9/12/04, 1:42 PM33
34
Dimension: 140mm x 215mm
Ch Setup (Continued)
L UNIVERSAL PLUS FUNCTION
VCR or DVD input mode will be selected automatically by pressing
the VCR or DVD PLAY buttons on the UNIVERSAL REMOTE
CONTROL.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “CH
SETUP”.
3 Press
VOL (+)
or
(–)
to access CH SETUP mode, then press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “UNIVERSAL
PLUS”.
4 Press
VOL (+)
or
(–)
to access UNIVERSAL PLUS to select VCR
or DVD mode.
5 Press
CH UP (
8
)
or
DOWN (
9
)
to select the VCR or DVD, and
press
VOL (+)
or
(–)
to select “CH3, CH4”, “INPUT 1 (or
COMPONENT)”, “INPUT 2” or “OFF”.
Set model to the input in which your
VCR or DVD is connected to. If done
through RF, select either channel 3 or
4 to match the setting of the VCR or
DVD.
6 Press
MENU
to exit.
(MAIN MENU screen)
→
9
VCR-CH
8
POWER (DVD/VCR)
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ABCD
PERSONAL PREFERENCE
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
CH
8
9
CH
MENU
CH ESUPT
AIR AC/BLE
CH MME ORY
CH ASE RCH
PERSONAL PR
EZ TSE UP
EF .
UN I VERSAL P L SU
(CH SETUP mode)
CH
8
9
CH
;
:
VOL
–
VOL
+
→
UN I EVSLARPLSU
VCR F F:O
DVD FF:O
(EZ SETUP mode)
;
:
VOL
–
VOL
+
UN I EVSLARPLSU
VCR H3:C
DVD FF:O
MENU
CH3 CH4
OFF
INPUT 1 (or COMPONENT)
INPUT 2
CH
8
9
CH
;
:
VOL
–
VOL
+
→
(UNIVERSAL PLUS select mode)
20F650[34-39].p65 9/12/04, 1:43 PM34
35
Dimension: 140mm x 215mm
Set Up
L ENERGY SAVE
This feature lets you lower the power consumption of your TV set
which in turn saves you money and minimizes the impact on the
environment. When this feature is turned on, it reduce the
brightness of the TV to a level that consumes approximately 20
percent less energy than when the feature is turned off.
The reduction in brightness will be less noticeable under low room
lighting conditions.
1 Press
MENU
to access the MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “SETUP”.
3 Press
VOL (+)
or
(–)
to access SETUP select mode, then press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “ENERGY SAVE”.
4 Press
VOL (+)
or
(–)
to access ENERGY SAVE select mode.
5 Press
VOL (+)
or
(–)
to select “ON”.
6 Press
MENU
to exit.
(MAIN MENU screen)
CH
8
9
CH
→
MENU
321
654
987
100
0
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
SET PU
LANG GUA E
ENERGY SAVE
BLUE SCREE
AUTO I NPUT
N
(SETUP mode)
ENERGY SAVE
:OFFATST US
(ENERGY SAVE select mode)
ENERGY SAVE
:ONATST US
CH
8
9
CH
→
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
MENU
20F650[34-39].p65 9/12/04, 1:43 PM35
36
Dimension: 140mm x 215mm
Set Up (Continued)
L BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not received.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “SETUP”.
3 Press
VOL (+)
or
(–)
to access SETUP mode, then press
CH UP
(
8
)
or
DOWN (
9
)
to move the “a” mark to “BLUE SCREEN”.
4 Press
VOL (+)
or
(–)
to access BLUE SCREEN select mode.
5 Press
VOL (+)
or
(–)
to select “ON”.
6 Press
MENU
to exit.
When BLUE SCREEN is set to “ON”.
Note:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
SET PU
LANG GUA E
ENERGY SAVE
BLUE SCREE
AUTO I NPUT
N
(SETUP mode)
BLUE CSREEN
:OFFATST US
(BLUE SCREEN select mode)
BLUE CSREEN
:ONATST US
CH
8
9
CH
→
MENU
CH
8
9
CH
→
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
MENU
No signal Blue screen TV off
After five
seconds
After 15
minutes
Standby
mode
20F650[34-39].p65 9/12/04, 1:43 PM36
37
Dimension: 140mm x 215mm
Set Up (Continued)
L AUTO INPUT
The unit is preset to switch to the INPUT 2 mode automatically when VIDEO equipment is
connected to the INPUT 2 terminal. Do the following to switch this feature off:
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “a” mark to “SETUP”.
3 Press
VOL (+)
or
(–)
to access SETUP mode, then press
CH UP
(
8
)
or
DOWN (
9
)
to move the “a” mark to “AUTO INPUT”.
4 Press
VOL (+)
or
(–)
to access AUTO INPUT select mode.
5 Press
VOL (+)
or
(–)
to select “OFF” or “ON”.
6 You may turn off “AUTO INPUT” when it is not in use.
Press
VOL (+)
or
(–)
to select “OFF”.
7 Press
MENU
to exit.
CH
8
9
CH
→
MENU
CH
8
9
CH
→
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
MENU
;
:
VOL
–
VOL
+
→
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
SET PU
LANG GUA E
ENERGY SAVE
BLUE SCREE
AUTO I NPUT
N
(SETUP mode)
OAUT I NPUT
:ONATST US
2)IN(PUT
(AUTO INPUT select mode)
OAUT I NPUT
:OFFATST US
2)IN(PUT
20F650[34-39].p65 9/12/04, 1:43 PM37
38
Dimension: 140mm x 215mm
Using the Video and Audio Input Jacks
L Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played back
on the video equipment can be seen on the television screen.
Connecting video device equipped with video output terminals.
CONNECTIONS
DVD
CAMCORDER
TV GAME
VCR
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
(Rear connection
terminals of TV)
To VIDEO OUTPUT
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
(Front connection
terminals of TV)
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
(Pull open for inside door)
To VIDEO OUTPUT
VIDEO EQUIPMENT
20F650[34-39].p65 9/12/04, 1:43 PM38
39
Dimension: 140mm x 215mm
Using the Video and Audio Input Jacks (Continued)
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
Video Equipment
To COMPONENT
VIDEO OUTPUT
Jacks
To AUDIO
OUTPUT
(L/R)
Video Equipment with
Component Video
(Component Color)
Output Jacks (Y, P
B
and P
R
)
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
To VIDEO OUTPUT
(Rear connection terminals of TV)
L To watch video material playback.
• Press the Remote’s
INPUT
button to select the VIDEO INPUT mode for the video equipment you wish
to play.
• The external VIDEO INPUT mode will change as follows each time the
INPUT
button is pressed.
• When the AV cables are being connected to the VIDEO INPUT 1 and COMPONENT Y terminals
simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.
• INPUT mode can be selected by pressing either the
CH UP (
8
)
on the TV remote control when the TV
is set to the highest channel stored in memory, or by pressing the
CH DOWN (
9
)
when it is set to the
lowest channel.
Note:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the
United States and that prior permission be obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
AIR
or
CABLE
INPUT 1 (or COMPONENT)
(IN 1)
Rear
INPUT 2
(IN 2)
Front
20F650[34-39].p65 9/12/04, 1:43 PM39
40
Dimension: 140mm x 215mm
Using the Audio Output Jacks
L These jacks are used for connecting an external audio amplifier. The STEREO/MONO/SAP,
VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or
directly on the TV itself. These jacks relay the audio signal of all programs being displayed on
the TV screen.
(AUDIO OUTPUT JACKS are located on the rear of the cabinet.)
CONNECTIONS
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
PR
PB
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
(Rear connection
terminals of TV)
Stereo Amplifier
Speaker System
To the audio
input terminals
(1) Before connecting the cables, turn on the TV and adjust the VOLUME control on the TV to a moderate
listening level.
(2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT JACKS on the TV.
(3) Turn the TV set and stereo amplifier on.
(4) If you desire, you can turn off the sound to the TV’s internal speakers by acessing the TV’s AUDIO
SELECT mode. See page 15 ~ 16.
(5) Adjust the VOLUME control on the stereo amplifier for a moderate listening level.
(6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,
MUTE and FAO), from either the remote control, or directly from the TV set.
Note:
• For detailed information on the connection and use of auxiliary equipment, refer to the operation
manuals of the equipment being used.
• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio
connection cord and plug adaptor as shown below.
• For optimal sound quality, we recommend you to keep the TV’s audio output level high.
Plug adapter
Pin jack/Mini plug
To the equipment
being connected
Pin plug x 2 Pin Plug
To the TV
20F650[40-43].p65 9/12/04, 1:44 PM40
41
Dimension: 140mm x 215mm
Operation of Universal Remote Control
• Universal Remote Control
With the purchase of your television set you
also have received the latest innovation in
remote control technology. With its easy-to-use
push button keyboard, your Remote can control
your television set and most infrared remote
controlled VCRs, cable TV converters and
DVDs as well.
Note:
• Depending on the model, year produced, brand
and type of VCR, cable TV converter and DVD,
some models may not be compatible with the
remote control.
• Some brands may not enable channel selection
until the
ENTER
button is pressed.
Example:
When you select channel 24,
(1) Press
REMOTE KEYPAD
“2”.
(2) Press
REMOTE KEYPAD
“4”.
(3) Press
ENTER
.
For detailed information on the use of the Cable
TV converter Box refer to their operating
manuals.
• Using Your Remote With Your TV
After installing the batteries, press the
TV/VCR
on the remote to select the TV mode. (If you
can change the channel of the TV by pressing
CH UP (
8
)
or
DOWN (
9
)
on the Remote
Control, it is the TV mode.)
• “Identifying” Remote VCRs, cable TV
conveters and DVDs
Your Remote Control has been set at the factory
to operate your TV and many remote control
VCRs, cable TV converters and DVDs.
However, in some cases an easy one-time set-
up step may be necessary before the Remote
will operate accessory VCRs, cable TV
converters and DVDs.
• In this set-up step, the Remote locates and
memorizes the remote control transmitter code
for the VCR, cable TV converters and DVDs.
• Once “identified”, the Remote sends the proper
remote signals to operate your accessory.
• This identify step will not have to be repeated
until power to the Remote is interrupted due to
a battery failure.
• Using your remote control with a VCR
Once you make certain the Remote Control has
“identified” your remote controlled VCR or DVD,
the Remote Control is ready to operate your
unit. The various VCR or DVD function buttons
on the Remote Control will not operate your
VCR or DVD if those features are not already
found on your unit.
• All VCR buttons will operate whether the
Remote Control is in TV or VCR modes.
• For detailed information on the use of the VCR
or DVD, refer to the operation manual of the
VCR or DVD.
321
654
987
100
0
TV • CATV • VCR • DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
PLAY -
Press to playback a tape or disc.
POWER (DVD/VCR)
Press to turn the VCR or DVD on and
off.
REWIND 3
Press to rewind a tape or reverse a
disc. For some VCRs or DVDs you
may need to press STOP first, then
REWIND.
STOP L
Press to stop the tape or disc.
PAUSE J
Press to temporarily stop the tape or
disc during playback or recording (VCR
only).
Press again to release Pause.
REMOTE KEYPAD
Use to enter two-digit code numbers
when identifying your VCR.
ENTER
VCR CHANNEL UP (8)/DOWN (9)
Press to scan up or down through
channels on the VCR.
DVD SKIP
Press to jump forward to the beginning
of the next chapter/track, or backward
to the beginning of the current chapter/
track, and automatically start to play
that chapter/track.
FF 2
Press to rapidly advance the tape or
disc. For some VCRs or DVDs, you
may need to press STOP first, then
FF.
20F650[40-43].p65 9/12/04, 1:44 PM41
42
Dimension: 140mm x 215mm
Operation of Universal Remote Control (Continued)
321
654
987
100
0
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY INPUT
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
CATV TV
DVD VCR
• How to identify a VCR
The remote control may already be set to
operate your VCR. Try this initial check before
going on to the following “identify” section.
(1) Press
TV/VCR
button.
(2) Point remote towards VCR and press
POWER
(DVD/VCR)
.
(3) Does the remote turn the VCR ON and OFF?
• If yes, the remote is ready to operate the VCR
and no further steps are needed.
• If no, continue to the “identify” section.
Setting Method
Refer to the following steps and list to quickly find
the remote control code for your accessory VCR.
• First look up your VCR’s remote control code
number before going through the Setting
Method.
(1) Press
TV/VCR
button.
(2) Press and hold down
DISPLAY
and
CH DOWN
(
9
)
on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing
DISPLAY
and
CH DOWN (
9
)
, enter your VCR’s two-digit
remote control code number using the
REMOTE KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your VCR.
Some brands have more than one remote code
listed, due to changes in the remote codes from
early to later model years, or due to format
differences (VHS/BETA). In such cases, you
may have to try more than one code to find the
code your VCR accepts.
Note:
Depending on the model, year produced, brand,
and type of VCR, some models may not be
compatible with the remote control.
TV POWER
REMOTE
KEYPAD
POWER
(DVD/VCR)
CATV/DVD-
TV/VCR
DISPLAY
CHANNEL
UP (,)/
DOWN(9)
VCR BRAND
REMOTE CONTROL
CODE NUMBER
Akai 25, 26, 37
Audio Dynamics 15, 22, 30
Broksonic 32
Canon 04
Capehart 34
Craig 10, 31
Curtis Mathis 04
Daewoo 34
DBX 15, 22, 30
Dynatech 29
Emerson 21, 32, 35
Fisher 09, 10, 11
Funai 28, 29
GE 04
Goldstar 24
Hitachi 06
Instant Replay 04
JC Penney 04, 06, 24, 30
JVC 15, 41, 42
Kenwood 14, 15
Lloyds 29
Magnavox 04, 05, 08
Magnin 31
Marantz 30
Memorex 04, 10, 24, 29
Minolta 06
Mitsubishi 17, 18, 39, 40
Montgomery Ward 02, 43
Multitech 29
NEC 15, 22, 30
Panasonic 04, 44
Pentax 05, 06
Philco 04, 05
Philips 04, 05, 08
Quasar 04
RCA 06, 07, 33
Realistic 01, 02, 10, 24
Samsung 23, 31
Sanyo 14, 10
Scott 20
Sears 06, 11, 24
Sharp 01, 02, 03
Shintom 36
Sony 12, 13, 38
Sound Design 29
Sylvania 04, 05, 08
Symphonic 29
Tatung 15
Teac 15, 29
Teknika 27, 29
Thomas 29
TMK 21
Toshiba 19, 20
Video Concepts 30
Yamaha 15, 29, 30
Zenith 16
20F650[40-43].p65 9/12/04, 1:44 PM42
43
Dimension: 140mm x 215mm
Operation of Universal Remote Control (Continued)
321
654
987
100
0
TV • CATV • VCR • DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY INPUT
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
CATV TV
DVD VCR
• How to identify a DVD
The remote control may already be set to
operate your DVD. Try this initial check before
going on to the following “identify” section.
(1) Press
CATV/DVD
button.
(2) Point remote towards DVD and press
POWER
(DVD/VCR)
.
(3) Does the remote turn the DVD ON and OFF?
• If yes, the remote is ready to operate the DVD
and no further steps are needed.
• If no, continue to the “identify” section.
Setting Method
Refer to the following steps and list to quickly
find the remote control code for your accessory
DVD.
• First look up your DVD’s remote control code
number before going through the Setting
Method.
(1) Press
CATV/DVD
button.
(2) Press and hold down
INPUT
and
CH DOWN
(
9
)
on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing
INPUT
and
CH DOWN (
9
)
, enter your DVDs two-digit
remote control code number using
REMOTE
KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your DVD.
DVD BRAND
REMOTE CONTROL
CODE NUMBER
Denon 02
JVC 09
Magnavox 04
Marantz 04
Mitsubishi 06
Panasonic 02
Philips 04
Pioneer 08
Proscan 03
RCA 03
Samsung 07
Sharp 01, 10
Sony 05
Toshiba 04
Yamaha 02
Zenith 04
Note:
Depending on the model, year produced, brand,
and type of DVD, some models may not be
compatible with the remote control.
TV POWER
REMOTE
KEYPAD
POWER
(DVD/VCR)
CATV/DVD-TV/VCR
DISPLAY
CHANNEL UP (,)/
DOWN(9)
INPUT
20F650[40-43].p65 9/12/04, 1:44 PM43
44
Dimension: 140mm x 215mm
Operation of Universal Remote Control (Continued)
• How to identify a cable converter
Setting Method
Refer to the following steps and list to quickly
find the remote control code for your cable TV
converter.
• First look up your converter’s remote code
number before going through the Setting
Method below.
(1) Press
CATV/DVD
button.
(2) Press and hold down
DISPLAY
and
CH DOWN
(
9
)
on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing
DISPLAY
and
CH DOWN (
9
)
, enter your converter’s two-
digit code number using
REMOTE KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your converter.
• Some brands have more than one remote code
listed due to changes in the remote codes from
early to later model years. In such cases, you
may have to try more than one code to find the
code your converter accepts.
Note:
Depending on the model, year produced, brand,
and type of CATV converter, some models may
not be compatible with the remote control.
CATV CONVERTER REMOTE CONTROL
BRAND CODE NUMBER
Anvision 07, 08
Cable Star 07, 08
Eagle 08
General Instrument 04, 05, 15, 23, 24, 25,
30, 36
Jerrold 04, 05, 15, 23, 24, 25,
30, 36
Magnavox 07, 08, 19, 25, 28, 29,
32, 33, 40, 41
Oak Sigma 18
Panasonic 27, 39
Philips 07, 08, 19, 26, 28, 29,
32, 33, 40, 41
Pioneer 18, 20
Randtek 07, 08
RCA 27, 43
Scientific Atlanta 03, 22, 42
Sony 44
Viewstar 07, 08, 19, 26, 28, 29,
32, 33, 40, 41
Zenith 14
321
654
987
100
0
TV • CATV • VCR • DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY INPUT
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
CATV TV
DVD VCR
TV POWER
REMOTE
KEYPAD
CATV/DVD-TV/VCR
DISPLAY
CHANNEL UP (,)/
DOWN(9)
20F650[44-46].p65 9/12/04, 1:45 PM44
45
Dimension: 140mm x 215mm
Before Calling for Service
Check these items and see if you can correct the trouble with a slight adjustment of the controls.
POSSIBLE REMEDY
Try a new channel, if OK, then
XX X X X XX X XXX
there is possible station trouble.
Is TV plugged in? Power at outlet? XX X
Is TV’s POWER button on? XX
Is antenna connected to terminal
XXX X X X
on the back of the set?
If outside antenna is being used,
XXXX X XXXXX X
check for broken wire.
Check for local interference or
XXXXXXX X
external electrical noise.
Turn off with POWER button and
XX
then turn it on after about a minute.
Adjust COLOR control. X
Adjust PICTURE control. XX
Check external Video/Audio
X X XXX
products: look for loose/broken
connection leads.
(Refer to page 38 ~ 39)
Check batteries of Remote Control. X
Press TV/VCR button on the
X
remote to select TV mode.
Are audio cables connected firmly?
X
Check the volume level.
Is SPEAKER ON? See page 15 ~ 16. X
Change CLOSED CAPTION mode
to “OFF” / ENERGY SAVE mode to X
“OFF”.
Unplug the TV and plug it in again
X XXXX XXXXX X
after two minutes or longer.
PROBLEM
No Playback of VCR and Disc
Player
No Picture or Sound from
External Video/Audio Products
Remote Control Doesn’t Work
Bars on Screen
Picture Distorted
Picture Rolls Vertically
No Color
Poor Reception on Some
Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in Picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Dark and Blank Picture
External Electrical Noise
Interfering with TV’s Operation
Color on Part of the Screen
Appears Distored
QUICK SERVICE
CHECK LIST
Note:
• When viewing in TEXT mode, if no TEXT broadcast is being received,
the screen may become dark and blank. Should this occur, set the
CLOSED CAPTION mode to “OFF”.
Calling for Service
For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,
or customer assistance, please call 1-800-BE-SHARP.
(Dark and Blank Picture)
20F650[44-46].p65 9/12/04, 1:45 PM45
46
Dimension: 140mm x 215mm
Specifications
MODEL 20F650
Receiving System NTSC
Stereo Broadcast MTS/SAP
Reception Channels
AIR VHF 2-13 ch
UHF 14-69 ch
CATV 1-125 ch
Channel Tuning 181-channel Reception PLL tuning system
Antenna Input Impedance VHF/UHF 75 ohm Unbalanced
Screen Size 20˝ Diagonally Measured
(Visible Area) (50.8 cm)
Terminals Audio/Video input × 2 (Front x 1, Rear x 1),
COMPONENT-IN × 1 (Rear), Audio Output × 1 (Rear)
Sound Output 2.5 W (RMS) × 2
Power Source AC 120 V, 60 Hz
Power Consumption 88 W
Dimensions 23
25
/
64
˝ × 18
1
/
2
˝ × 19
5
/
64
˝
(W) x (H) x (D) [594 mm × 470 mm × 485 mm]
Weight (approx.) 56.2 lbs. (25.5 kg)
• Design and specifications are subject to change without notice.
20F650[44-46].p65 10/12/04, 8:12 AM46
47
Dimension: 140mm x 215mm
(ESPAÑOL)
Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro.
IMPORTANTE
Sírvase anotar el modelo del televisor y los números de serie
en el espacio provisto, para ayudar a reportar en caso de pérdida
o robo. Los números están ubicados en la parte posterior del
televisor.
N° de modelo :
N° de serie :
INFORMACIÓN IMPORTANTE
Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor
SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.
PRIMERA – GARANTÍA
Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en c’uanto a piezas,
servicio técnico y mano de obra aplicable a su adquisición.
SEGUNDA – ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR
Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre
inspección, modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de
productos de consumidor de 1972. LEA CUIDADOSAMENTE LA CLÁUSULA “GARANTÍA LIMITADA”
DE LA ÚLTIMA PÁGINA.
ADVERTENCIA:
PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA
ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD.
PRECAUCIÓN : PARA REDUCIR EL RIESGO DE
DESCARGAS ELÉCTRICAS, NO RETIRE LA
CUBIERTA (NI EL PANEL POSTERIOR).
NO CONTIENE PIEZAS REPARABLES POR EL
USUARIO.
SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE
SERVICIO TÉCNICO ESPECIALIZADO.
El relámpago con cabeza de
flecha dentro de un triángulo
trata de indicar al usuario que las
partes dentro del producto
representan riesgo de
electrochoque para las
personas.
El signo de exclamación dentro
de un triángulo trata de indicar
al usuario que las instrucciones
importantes de operación y
servicio se encuentran en los
documentos con el aparato.
“Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención
del instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene
las directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe
estar conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.”
DESECHO DEL PRODUCTO
Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo.
El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener
información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con
Electronics Industries Alliance: www.eiae.org
ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada
que se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la
autoridad del usuario para utilizar este equipo.
20F650[47-52].p65 9/12/04, 1:45 PM47
48
Dimension: 140mm x 215mm
INFORMACIÓN IMPORTANTE (Continuación)
PRECAUCIÓN:
• No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado.
• Para impedir un incendio, no ponga nunca ningún tipo de vela o llama al descubierto encima o cerca del
televisor.
• Para impedir un incendio o una descarga eléctrica, no exponga este aparato al goteo ni a las salpicaduras.
Tampoco deberán ponerse encima de los productos objetos llenos de líquidos como, por ejemplo, floreros.
MEDIDAS DE SEGURIDAD IMPORTANTES
PRECAUCIÓN: Lea por favor todas estas instrucciones antes de poner en funcionamiento
su televisor, y guárdelas para poder utilizarlas en el futuro.
La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para
garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE
DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar
problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.
1. Desenchufe el televisor del tomacorriente antes de limpiarlo.
2. No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.
3. No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.
4. No utilice el televisor cerca del agua – por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en
un sótano húmedo, cerca de una piscina, etc.
5. No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse
causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor
solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con
el televisor.
6. La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas rápidas,
la fuerza excesiva y las superficies irregulares pueden ser la causa de que la combinación
de televisor y carrito se volteen.
7. Cuando instale el televisor en una pared o en una estantería siga las instrucciones del
fabricante, y utilice el kit de montaje aprobado por el fabricante.
8. Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para
que éste funcione bien y para evitar que se caliente. Estas aberturas no deben taparse nunca. Este televisor
no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación
apropiada.
9. Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no
deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar.
Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.
10. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no
está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien
adquirió el televisor o con la compañía eléctrica local.
En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de
uso.
11. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos.
El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.
Si el enchufe no entra en el tomacorriente, pídale a un electrícista que le coloque un tomacorriente nuevo.
No modifique el enchufe porque anulará esta característica de seguridad.
12. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable
pueda ser deformado por personas que caminen sobre él.
20F650[47-52].p65 9/12/04, 1:45 PM48
49
Dimension: 140mm x 215mm
MEDIDAS DE SEGURIDAD IMPORTANTES
(Continuación)
13. Cumpla con todos los avisos y las instrucciones marcados en el televisor.
14. Si se conecta una antena exterior al televisor, asegúrese de que el sistema de antena esté conectado a
tierra para obtener cierta protección ante los aumentos de voltaje y la acumulación de cargas estáticas. La
sección 810 del Código Eléctrico Nacional ofrece información relacionada con la conexión a tierra correcta
del poste y la estructura de apoyo, la conexión a tierra del cable de entrada a una unidad de descarga, el
tamaño de los conductores de conexión a tierra, la ubicación de la unidad de descarga de antena, la
conexión a los electrodos de conexión a tierra, y los requisitos para el electrodo de conexión a tierra.
15. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin
utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y
desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la
sobretensión en la línea de alimentación.
16. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de
luces eléctricas o circuitos de alimentación. Tampoco debe ubicarse donde pueda caer sobre tales líneas o
circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado para no
tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal.
17. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o
descarga eléctrica.
18. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o
causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca
ningún tipo de líquido sobre el televisor.
19. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una
descarga de tensión u otros peligros. Las reparaciones debe realizarlas el personal de servicio CALIFICADO.
20. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se produzcan
las condiciones siguientes:
A. Cuando el cable de la alimentación o el enchufe estén estropeados.
B. Cuando haya derramado un líquido sobre el televisor.
C. Si el televisor ha quedado expuesto a la lluvia o al agua.
D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente los
controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles podría
estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que éste lo
repare y lo devuelva a su condición normal.
E. Si el televisor se ha caído o la caja se ha estropeado.
F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio de
reparaciones.
21. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice
comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún
problema.
22. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de CAMBIO
especificadas por el fabricante, aquellas que tengan las mismas características que las piezas originales.
Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u otros peligros.
EJEMPLO DE CONEXIÓN A TIERRA DE LA
ANTENA SEGÚN EL CÓDIGO ELÉCTRICO NACIONAL
NEC - CÓDIGO ELÉCTRICO NACIONAL
CABLE DE ENTRADA DE ANTENA
ABRAZADERA DE CONEXIÓN A TIERRA
UNIDAD DE DESCARGA DE ANTENA
(NEC SECCIÓN 810-20)
ABRAZADERAS DE CONEXIÓN A TIERRA
CONDUCTORES DE CONEXIÓN A TIERRA
(NEC SECCIÓN 810-21)
EQUIPO DE
SERVICIO
ELÉTRICO
SISTEMA DE CONEXIÓN A TIERRA DEL ELECTRODO
DE SERVICIO ELÉCTRICO (NEC ART. 250, APARTADO H)
20F650[47-52].p65 9/12/04, 1:45 PM49
50
Dimension: 140mm x 215mm
Referencia rápida de los controles de operación
• Nombres de los Componentes (ESPAÑOL)
Panel Delantero
(POR DENTRO
DE LA PUERTA)
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente →
Apaga (Off).
MENU (MENU)
Pulsando → Accede al MENU
PRINCIPAL.
Pulsando nuevamente →
Sale del MENU PRINCIPAL.
AUMENTO/DISMINUCION DEL VOLUMEN (VOL)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
CANAL SUPERIOR/INFERIOR
(8) Selecciona el siguiente canal superior.
(9) Selecciona el siguiente canal inferior.
SENSOR DE CONTROL
REMOTE
TERMINALES
IN 2
DE
ENTRADA VIDEO/AUDIO IN 2
Para abrir la puerta
Utilizando el saliente situado debajo de la indicación
“PULL-OPEN”, tire de la puerta y levántela para abrirla.
Para cerrar la puerta
Utilizando el saliente, baje la puerta hasta que se cierre.
Precaución:
• Cuando abra o cierre la puerta, no inserte los dedos en la ranura
entre la puerta y el panel frontal. Esto podria producirle una
lesión.
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
TERMINAL DE ENTRADA DE
ANTENA/TV POR CABLE
TERMINALES LINE OUT
TERMINALES IN 1
TERMINALES DE VÍDEO COMPONENTE
Panel Posterior
20F650[47-52].p65 9/12/04, 1:45 PM50
51
Dimension: 140mm x 215mm
Funciones Basicas Del Control Remoto
Referencia rápida de los controles de operación (Continuación)
321
654
987
100
0
TV • CATV • VCR • DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga (Off).
Ventanilla del transmisor de infrarrojos
Botones DE TELEVISOR/
TV POR CABLE (TV-CATV)
Pulse TV/VCR, el mando envia los
comandos de alimentación y selección
de canales (botones de canal superior/
inferior y de acceso aleatorio) a un
televisor.
Pulse CATV/DVD, envia los comandos
de alimentación y selección de canales
a un convertidor de TV por cable.
TECLADO A DISTANCIA
(REMOTE KEYPAD)
Para tener acceso a cualquier
canal empleando las teclas.
RETORNO AL CANAL ANTERIOR
(FLASHBACK)
Para volver al canal anterior.
AUMENTO/DISMINUCION DEL
VOLUMEN (VOLUME UP/DOWN)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
• En modo de MENU cambia o
selecciona el ajuste del televisor.
SILENCIAMIENTO (MUTE)
Pulsando → Silencia el sonido.
Pulsando nuevamente → Restaura el
sonido.
• CLOSED CAPTION aparece
automáticamente cuando el
sonido es silenciado. Siempre y
cuando la transmisión tenga
esta señal.
PREPARACION (MENU)
Pulsando → Accede al MENU
PRINCIPAL.
Pulsando nuevamente → Sale del
MENU PRINCIPAL.
ALIMENTACION (DVD/VCR)
[POWER (DVD/VCR)]
Pulsando → Enciende (On).
Pulsando nuevamente →
Apaga (Off).
PREFERENCIAS PERSONALES
Con los botones Personal Preference
puede programar sus programas
favoritos utilizando las cuatro categorías
A, B, C y D. Puede acceder a los
canales rápidamente utilizando
estos botones. (Consulte la página 33)
VISUALIZACION (DISPLAY)
Pulsando → Aparece el canal de
recepción por cuatro segundos.
Pulsando nuevamente → Elimina la
visualización.
• En el modo de “Closed Caption” se
muestra el canal de recepción por
un corto tiempo.
ENTRADA (INPUT)
Pulsando → Cambia al modo de
entrada 1 del vídeo externo o al modo.
Pulsando 2 veces → Cambia al modo
de entrada 2 del vídeo externo.
Pulsando 3 veces → Vuelve al modo
TV original. Consulte la página 39.
INTRODUCIR (ENTER)
Se utiliza en algunos casos en los
cuales una Caja de Inversor de Cable
requiere una orden “enter” después de
seleccionar los canales, al usar el
teclado a distancia.
(Consulte la página 41)
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(8) Selecciona el siguiente canal
superior.
(9) Selecciona el siguiente canal
inferior.
• Consulte las páginas 30 ~ 32 para
obtener información sobre el
preajuste de canales.
• En el modo de MENU, mueve la
marca “ a ”.
SKIP/VCR-CH
CONTROLES DEL DVD/VIDEO
Consulte la página 41.
REC
Nota:
• Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para
usar el visor del control remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra
fuente luminosa.
• El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no
representa ningún peligro.
• El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.
• El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.
• El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación
circundante.
• La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.
• Nombres de los Componentes
20F650[47-52].p65 9/12/04, 1:45 PM51
52
Dimension: 140mm x 215mm
Antes de llamar al servicio de reparaciones
Verifique estos puntos para ver si usted mismo puede solucionar el problema.
POSIBLE SOLUCIÓN
Pruebe con otro canal y si todo está bien,
XX X X X XX X XXX
el problema puede ser de la emisora.
Está conectado el televisor?
XX X
Llega electricidad al tomacorrientes?
Está conectado el interruptor POWER
XX
del televisor?
Está conectado la antena al terminal del
XXX X X X
panel posterior del televisor?
Si utiliza una antena exterior, cerciórese
XXXXXXXXXX X
de que el cable no esté dañado.
Compruebe si hay interferencia local.
XX X XX XX X
Desconecte el interruptor POWER y
vuelva a conectarlo después de transcurrir
XX
un minuto.
Ajuste el control de COLOR.
X
Ajuste el control de MATIZ.
XX
Verifique los productos externos de Video/
XX XXX
Audio, revise si hay conexiones sueltas
o rotas.
(Ver pág. 38 ~ 39)
Compruebe el estado de las pilas del
X
mando a distancia.
Deslice CATV/DVD-TV/VCR selector
X
para situarlo sobre la posición TV.
Están bien conectados los cables de
X
sonido? Compruebe el nivel del volumen.
Está conectado el altavoz?
X
Ver pág. 15 ~ 16.
Desactive (OFF) el modo CLOSED
CAPTION / Desactive (OFF) el modo
X
AHORRO DE ENERGÍA (Energy Save).
Desenchufe el televisor y vuelva a
X XXXX XXXXX X
enchufarlo despúes de dos minutos o más.
PROBLEMA
El vídeo o el reproductor de discos de
video no reproducen im
ágenes
El equipo de video/audio externo no
produce imágenes ni sonido
El mando a distancia no funciona
Barras en la pantalla
Imagen distorsionada
La imagen se desplaza verticalmente
No hay color
Mala recepción de algunos canales
Imagen débil
Franjas en la imagen
Imagen fantasma
Imagen borrosa
Sonido adecuado, imagen mala
Imagen adecuada, sonido malo
No hay imagen ni sonido
Imagen oscura y en blanco
Interferencia de ruido eléctrico externo
con el funcionamento del televisor
El color se ve distorsionado en parte
de la pantalla
LISTA DE
COMPROBACIONES
DE SERVICIO
RAPIDO
(Imagen oscura y en blanco)
Nota:
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la
pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga el
modo CLOSED CAPTION en OFF.
Solicitud de servicio técnico
Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de
información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.
20F650[47-52].p65 9/12/04, 1:45 PM52
53
Dimension: 140mm x 215mm
MISE AU REBUT DU PRODUIT
Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre.
La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour
toute information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions
importantes préconisées par la société Electronics Industries Alliance sur : www.eiae.org.
AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non
autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir
de l’utilisateur sur le fonctionnement de cet équipement.
(FRANÇAIS)
Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.
IMPORTANT
Afin de vous aider en cas de perte ou de vol, inscrivez les
numéros de série et de modèle du téléviseur dans les espaces
fournis à cet effet. Ces numéros sont situés à l’arrière du
téléviseur.
N° du modèle :
N° de série :
INFORMATIONS IMPORTANTES
Deux raisons importantes d’enregistrer rapidement la garantie de votre nouveau téléviseur SHARP à
l’aide de la carte d’enregistrement (REGISTRATION CARD) incluse dans le colis :
LA PREMIERE – LA GARANTIE
Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du
service et des travaux applicable à votre achat.
LA DEUXIEME – LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION
(CONSUMER PRODUCT SAFETY ACT)
Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du
rappel de votre produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la
sécurité du produit de consommation. LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE
LIMITEE» DE LA DERNIÈRE PAGE.
AVERTISSEMENT:
POUR REDUIRE LE RISQUE D’INCENDIE OU D’ELECTROCUTION,
N’EXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES.
ATTENTION :
POUR REDUIRE LE RISQUE
D’ELECTROCUTION,
NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).
L’APPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR
PAR L’UTILISATEUR.
CONSULTEZ UN PERSONNEL QUALIFIE POUR
LA MAINTENANCE.
Le symbole de la foudre sous
forme de flèche dans un triangle
est supposé indiquer à
l’utilisateur que les pièces
internes au produit constituent
un risque d’électrocution.
Le symbole du point d’exclamation
dans un triangle est supposé
indiquer à l’utilisateur que des
instructions de fonctionnement et
de maintenance importantes se
trouvent dans la documentation
fournie avec l’équipement.
“Note à l’intention de l’installateur du système CATV : Ce rappel est fourni afin d’attirer l’attention de
l’installateur de système CATV sur l’article 820-40 du National Electrical Code qui indique les règles
de mise à la terre appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au
réseau commun de mise à la terre du bâtiment, au point le plus proche possible de la source.”
20F650[53-60].p65 9/12/04, 1:46 PM53
54
Dimension: 140mm x 215mm
INFORMATIONS IMPORTANTES (Suite)
ATTENTION:
• Ne placez pas le cordon d’alimentation sous le téléviseur ou sous tout autre objet lourd.
• Ne placez pas le bougies ni de flammes nues sur le téléviseur ou à sa proximité, afin d’éviter les incendies.
• Veillez à ne pas éclabousser ni faire tomber de l’eau sur ces appareils afin d’éviter les incendies ou les
électrocutions. Ne placez jamais d’objets remplis de liquide, comme des vases, sur ces appareils.
PRÉCAUTIONS IMPORTANTES
ATTENTION: Veuillez lire toutes ces instructions avant d’utiliser votre télévision et conservez-
les pour un usage ultérieur.
L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de façon
à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER DES
RISQUES D’ELECTROCUTION OU D’INCENDIE. Afin de ne pas détruire les protections intégrées à cet appareil,
respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance.
1. Débranchez la télévision avant de la nettoyer.
2. N’utilisez pas de nettoyants liquides ou d’aérosols et utilisez un chiffon humide.
3. N’utilisez pas d’accessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques.
4. N’utilisez pas cette télévision à proximité d’eau — par exemple, près d’une baignoire, d’un lavabo, d’un
évier ou d’un bac à laver, dans une cave humide ou près d’une piscine, etc.
5. Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber et
provoquer de graves lésions à toute personne et causer de sérieux dommages à l’équipement. Utilisez
uniquement un support ou un chariot recommandé par le fabricant ou vendu avec la
télévision.
6. L’ensemble télévision-chariot doit être déplacé délicatement. Les arrêts brusques, une force
excessive et des surfaces inégales peuvent renverser l’ensemble.
7. L’installation au mur ou sur une tablette doit être réalisée conformément aux instructions du
fabricant et à l’aide d’un kit de montage approuvé par ce dernier.
8. Les fentes et les ouvertures du châssis à l’arrière ou dans la partie inférieure sont prévus pour la ventilation.
Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces ouvertures
ne doivent être ni obturées, ni recouvertes. La télévision ne doit pas être placée dans un endroit encastré tel
qu’une bibliothèque, sauf si une ventilation adéquate est prévue.
9. Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure ne
doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface similaire.
Cette télévision ne doit être placée ni à proximité d’un radiateur ou d’un registre de chaleur, ni dessus.
10. Cette télévision doit être alimentée uniquement par le type d’alimentation électrique indiqué sur l’étiquette.
Si vous n’êtes pas sûr du type d’alimentation de votre domicile, consultez votre revendeur de télévision ou
la compagnie d’électricité locale (EDF en France).
Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode d’emploi.
11. Du point de vue de la sécurité, la télévision est équipée d’une fiche polarisée à 2 fils (une lame plus importante
que l’autre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul sens.
Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être
obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.
12. Ne posez rien sur le cordon d’alimentation. Ne placez pas la télévision dans un emplacement où le cordon
d’alimentation est susceptible d’être endommagé par le passage répété de personnes.
20F650[53-60].p65 9/12/04, 1:46 PM54
55
Dimension: 140mm x 215mm
PRÉCAUTIONS IMPORTANTES (Suite)
13. Respectez tous les avertissements et instructions mentionnés sur la télévision.
14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à la
terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques
accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la
terre correcte de la potence et de la structure portante, à une mise à la terre du fil d’entrée à une unité de
décharge d’antenne, aux dimensions des conducteurs de terre, à l’emplacement de l’unité de décharge
d’antenne, au raccordement des prises de terre ainsi qu’à leurs exigences.
15. Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée
pendant de longues périodes, débranchez-la et déconnectez l’antenne. Vous éviterez ainsi des dommages
à votre équipement suite à la foudre et des poussées de tension.
16. Un système d’antenne extérieure ne doit pas être situé à proximité de lignes aériennes ou d’autres groupes
électrogènes ou circuits électriques ou dans des emplacements où l’antenne pourrait tomber sur ce type de
lignes ou circuits. Lors de l’installation d’un système d’antenne extérieure, faites extrêmement attention à
ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal.
17. Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque d’incendie ou d’électrocution.
18. N’introduisez jamais d’objets à travers les fentes du châssis, car ils pourraient entrer en contact avec des
points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une
électrocution. Ne répandez jamais de liquides sur la télévision.
19. N’essayez pas de réparer vous-même votre télévision. L’ouverture ou le retrait des capots peut vous exposer
à une tension dangereuse ou à d’autres risques. Confiez toutes les opérations de maintenance à un personnel
qualifié.
20. Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les opérations
de maintenance à un personnel qualifié :
A. Lorsque le cordon d’alimentation ou la fiche est endommagé ou effiloché ;
B. Si du liquide a été répandu sur/dans la télévision ;
C. Si la télévision a été exposée à la pluie ou à l’eau ;
D. Si la télévision ne fonctionne pas normalement même en respectant le mode d’emploi. Réglez uniquement
les commandes abordées par le mode d’emploi. Des réglages inappropriés d’autres commandes peuvent
occasionner des dommages et nécessiteront ensuite, dans la plupart des cas, une intervention plus
importante d’un technicien qualifié pour que la télévision fonctionne normalement ;
E. Si la télévision a été renversée ou que le châssis est endommagé ;
F. Lorsque la télévision présente une altération visible des performances — cela indique un besoin de
maintenance.
21. Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles
de sécurité classiques afin de déterminer si la télévision est en bon état de marche.
22. Lorsqu’un remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des pièces de
rechange spécifiées par le fabricant et qu’elles aient les mêmes caractéristiques que la pièce d’origine. Des
remplacements non autorisés peuvent occasionner un incendie, une électrocution ou d’autres risques.
EXEMPLE DE MISE A LA TERRE D’UNE ANTENNE
SELON LE CODE NATIONAL DE L’ÉLECTRICITÉ
NEC - CODE NATIONAL DE L’ÉLECTRICITÉ
DESCENTE D’ANTENNE
COLLIER DE MISE À LA TERRE
UNITÉ DE DÉCHARGE D’ANTENNE
(NEC SECTION 810-20)
COLLIERS DE MISE À LA TERRE
CONDUCTEURS DE TERRE
(NEC SECTION 810-21)
BOÎTIER DE
LA COMPAGNIE
D’ÉLECTRICITÉ
ÉLECTRODE DE TERRE DE LA COMPAGNIE D’ÉLECTRICITÉ
(NEC ART. 250, PARTIE H)
20F650[53-60].p65 9/12/04, 1:46 PM55
56
Dimension: 140mm x 215mm
Référence rapide sur les commandes
• Nomenclature (FRANÇAIS)
Panneau Avant
(DERRIÉRE LE VOLET)
ALIMENTATION (POWER)
Appuyer → Pour mettre sous
tension.
Appuyer de nouveau →
Pour mettre hors tension.
RÈGLAGE (MENU)
Appuyer → Accès au MENU
PRINCIPAL.
Appuyer de nouveau →
Sortie du MENU PRINCIPAL.
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOL)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
CANAL HAUT/BAS
(8) Sélectionne le canal supérieur suivant.
(9) Sélectionne le canal inférieur précédent.
CAPTEUR DE
TÉLÉCOMMANDE
ENTREE VIDEO
IN 2
G-AUDIO-D
Pour ouvrir le volet
A l’aide de la saillie située sous l’indication “PULL-OPEN”, tirez
et soulevez pour ouvrir le volet.
Pour fermer le volet
A l’aide de la saillie, rabaissez le volet jusqu’à ce qu’il se ferme.
Attention:
• Lors de l’ouverture ou de la fermeture du volet, n’introduisez
pas les doigts dans la fente entre la porte et le panneau avant
sous peine de provoquer un accident.
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
PRISE D’ENTRÉE ANTENNE/
CÂBLE
PRISES LINE OUT
PRISE D’ENTRÉE IN 1
PRISE POUR APPAREIL VIDÉO
Panneau Arrière
20F650[53-60].p65 9/12/04, 1:46 PM56
57
Dimension: 140mm x 215mm
Fonctions de base de la télécommande
321
654
987
100
0
TV • CATV • VCR • DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ALIMENTATION (POWER)
Appuyer → Pour mettre sous tension.
Appuyer de nouveau →
Pour mettre hors tension.
Fenêtre d’émission du signal infrarouge
Touches DE MODE DE CÂBLOVISION/
DVD-TÉLÉVISION/MAGNÉTOSCOPE
(CATV/DVD-TV/VCR)
Appuyer sur la touche télévision/
magnétoscope (TV/VCR), permet de
mettre le téléviseur et le magnétoscope
sous/hors tension et de sélectionner
ses canaux (touche de canaux en ordre
croissant/décroissant et d’accès direct).
Appuyer sur la touche câblovision/DVD
(CATV/DVD), permet de mettre un
convertisseur de téléviseur par câble
et un lecteur de DVD sous/hors tension
et de sélectionner ses canaux.
PAVE NUMERIQUE DE COMMANDE
A DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal
voulu sur le pavé numérique.
RETOUR (FLASHBACK)
Rappelle le canal regardé précédent.
AUGMENTATION/RÉDUCTION
DU VOLUME SONORE
(VOLUME UP/DOWN)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
• Pour changer ou sélectionner
les réglages du téléviseur en
mode menu.
SOURDINE (MUTE)
Appuyer → Mise en sourdine du son.
Appuyer de nouveau →
Rétablissement du son.
• CLOSED CAPTION apparaît
lorsque le son est mis en sourdine.
RÉGLAGE (MENU)
Appuyer → Accès au MENU
PRINCIPAL.
Appuyer de nouveau → Sortie du
MENU PRINCIPAL.
ALIMENTATION (DVD/VCR)
[POWER (DVD/VCR)]
Appuyer → Pour mettre sous tension.
Appuyer de nouveau → Pour
mettre hors tension.
PREFERENCES PERSONNELLES
Grâce aux touches de préférence
personnelle, vous pouvez programmer
vos programmes préférés à l’aide des
4 catégories: A, B, C et D. Ces
touches vous permettent d’accéder
rapidement à ces canaux.
(Voir page 33)
AFFICHAGE (DISPLAY)
Appuyer → Pour afficher le canal reçu
pendant quatre secondes.
Appuyer de nouveau → Pour faire
disparaître le canal.
• Pour afficher temporairement le
canal reçu en mode Sous-titres.
ENTRÉE (INPUT)
Appuyer → Pour sélectionner le mode
ENTRÉE 1 vidéo externe ou le mode
COMPOSANT.
Appuyer 2 fois → Pour sélectionner le
mode ENTRÉE 2 vidéo externe.
Appuyer 3 fois → Pour revenir au mode
TV initial. Voir page 39.
ENTRER (ENTER)
Parfois utilisée lorsqu’un convertisseur
nécessite l’introduction d’une commande
“enter” après la sélection de canaux à
l’aide du pavé numérique de commande
à distance. (Voir page 41)
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CHANNEL UP/DOWN)
(8) Sélectionne le canal supérieur
suivant.
(9) Sélectionne le canal inférieur
précedént.
• Voir pages 30 ~ 32 pour prérégler les
canaux.
• Déplace le curseur “ a ” sur l’écran
du MENU.
SKIP/VCR-CH
COMMANDE DU LECTEUR DE
DVD/MAGNÉTOSCOPE
Voir page 41.
REC
Remarque:
• Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la
télécommande a été placée sous une ampoule fluorescente ou toute autre source lumineuse.
• Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en
toute sécurité.
• Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.
• Le degré d’illumination diminuera avec le temps, en fonction de la température.
• Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.
• Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de
chargement des touches phosphorescentes.
Référence rapide sur les commandes (Suite)
• Nomenclature
20F650[53-60].p65 9/12/04, 1:46 PM57
58
Dimension: 140mm x 215mm
Avant d’appeler un réparateur
Vérifier les points suivants afin de déterminer s’il est possible de remédier au problème par un simple réglage des commandes.
SOLUTION POSSIBLE
Essayer un nouveau canal. S’il fonctionne,
il s’agit probablement d’une panne de la
XX X X X XX X XXX
chaîne.
Le téléviseur est-il branché?
XX X
La prise secteur fonctionne-t-elle?
L’interrupteur POWER du téléviseur est-il
XX
sous tension?
L’antenne est-elle raccordée aux bornes
XXX X X X
à l’arrière de l’appareil?
Si l’antenne extérieure est utilisée,
XXXXXXXXXX X
s’assurer qu’il n’y a pas de fils sectionnés.
Vérifier s’il n’y a pas d’interférence locale
XXXXXXX X
ou de bruit électrique extérieur.
Mettre l’interrupteur POWER hors tension
puis de nouveau sous tension au
XX
bout d’une minute.
Régler la commande de COULEUR.
X
Régler la commande de CONTRASTE.
XX
Vérifier l’appareil vidéo/audio externe:
X X XXX
s’assurer que les câbles de connexion
ne sont pas desserrés ou cassés.
(Se reporter à la page 38 ~ 39)
Vérifier les piles de la télécommande.
X
Appuyez sur la touche TV/VCR de la
X
télécommande pour sélectionner le mode TV.
Les câbles audio sont-ils fermement
X
connectés? Vérifier le niveau du volume.
Les haut-parleurs fonctionnent-ils?
X
Voir pages 15 ~ 16.
Mettre le mode sous-titrage hors service
“ARRÊT” / Mode d’économie d’énergie
X
sur “ARRÊT”.
Débrancher le téléviseur et le rebrancher
X XXXX XXXXX X
après deux minutes.
PROBLEM
Pas de reproduction d’un magnéto-
scope ou lecteur de disque
Pas d’image ou de son d’un appareil
vidéo/audio externe
La télécommande ne fonctionne pas
Barres sur l’écran
Distorsion de l’image
L’image défile verticalement
Pas de couleur
Faible réception de certains canaux
Image affaiblie
Lignes ou rayures dans l’image
Images fantômes
Image brouillée
Son normal, image médiocre
Image normale, son médiocre
Ni son, ni image
Image sombre et vide
Bruit électrique extérieur interférant
avec le fonctionnement du téléviseur
Couleur sur une partie de l’écran
semble altérée
LISTE DES
VÉRIFICATIONS
POUR UN
DÉPANNAGE
RAPIDE
Remarque:
• En mode TEXTE, s’il n’y a pas d’émission TEXTE à recevoir, l’écran
du téléviseur pourrait être sombre et vide. Dans ce cas, placer le mode
Sous-titrage hors service.
Appel au service après-vente
Pour connaître l’emplacement du centre de service après-vente agrée Sharp le plus proche ou pour
obtenir de la documentation sur les produits, des accessoires, des consommables ou une aide au
consommateur, appelez le 1-800-BE-SHARP.
(Image sombre et vide)
20F650[53-60].p65 9/12/04, 1:46 PM58
59
Dimension: 140mm x 215mm
Limited Warranty
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp
brand product (the “Product”), when shipped in its original container, will be free from defective
workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the
defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser
for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded
item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which
has been subjected to improper voltage or other misuse, abnormal service or handling, or which has
been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth
below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE
OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties
other than those described herein, or to extend the duration of any warranties beyond the time period
described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be
the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the
period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of
Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,
whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable or in
any way responsible, for any damages or defects in the Product which were caused by repairs or attempted
repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way
responsible for any incidental or consequential economic or property damage. Some states do not allow
the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description: 20F650, 20 inch Color Television
(Be sure to have this information available when
you need service for your Product.)
Warranty Period for this Product: One (1) year parts and 90 days labor. The warranty
period continues for an additional one (1) year, for
a total of two (2) years, with respect to the picture
tube(s) in the Product for parts only. Labor and
service are not provided free of charge for this
additional period.
Additional Item(s) Excluded from Non-rechargeable batteries.
Warranty Coverage (if any):
Where to Obtain Service: From a Sharp Authorized Servicer located in the
United States. To find the location of the nearest
Sharp Authorized Servicer, call Sharp toll free at
1-800-BE-SHARP.
What to Do to Obtain Service: Contact your Sharp Authorized Servicer to obtain
in-home service for this Product. The Servicer will
come to your home and if it is necessary to remove
the Product, the Servicer will reinstall it. Be sure to
have Proof of Purchase available.
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharp-usa.com
20F650[53-60].p65 9/12/04, 1:46 PM59
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
Sharp 20F650 Manual de usuario
- Categoría
- Televisores CRT
- Tipo
- Manual de usuario
- Este manual también es adecuado para
En otros idiomas
- français: Sharp 20F650 Manuel utilisateur
- English: Sharp 20F650 User manual
Documentos relacionados
-
Sharp 27F543 Operation Manual Manual de usuario
-
-
-
-
-
-
-
-