Sharp 27C240 Manual de usuario

Categoría
Televisores LCD
Tipo
Manual de usuario

Este manual también es adecuado para

1
Dimension: 140mm x 215mm
COLOR TELEVISION
H OPERATION MANUAL H
MODEL
27C240
CONTENTS
PAGE
IMPORTANT INFORMATION/IMPORTANT
SAFEGUARDS .................................................... 2–4
Supplied Accessories ............................................... 5
Before Operating Your Television.............................. 5
Antenna Connections ........................................... 5, 6
Quick Reference Control Operation ......................... 7
EZ SETUP during First Use ..................................... 8
Demo Mode .............................................................. 9
Accessing the MAIN MENU screen without
Remote Control ........................................................ 9
Language ............................................................... 10
Sleep Timer ............................................................ 10
Video Adjust ........................................................... 11
Audio Select ..................................................... 12, 13
MTS (Multichannel TV Sound) ............................ 12
This operation manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 3539.
FRENCH is on page 40–44.
PAGE
Closed Caption ....................................................... 13
Parent Control .................................................. 14–24
V-CHIP Operation ......................................... 14–21
VIEW TIMER ................................................ 22–24
Energy Save ........................................................... 25
Set Up .............................................................. 26–30
EZ Setup ............................................................. 26
Channel Setting ............................................ 2729
Blue Screen .................................................. 29, 30
Using the Video and Audio Input Terminals ............ 31, 32
Before Calling for Service ....................................... 33
Calling for Service .................................................. 33
Specifications ......................................................... 34
Limited Warranty .................................................... 47
B161 N1
32C240(01-04) 03.11.28, 1:24 PM1
2
Dimension: 140mm x 215mm
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
Model No.:
Serial No.:
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
IMPORTANT INFORMATION
There are two important reasons for prompt warranty registration of your new SHARP television set. Use
the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
Note to CATV system installer: This reminder is provided to call the CATV system installers attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the users authority to operate this
equipment.
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries Alliance:
www.eiae.org
32C240(01-04) 03.11.28, 1:24 PM2
3
Dimension: 140mm x 215mm
IMPORTANT INFORMATION (Continued)
CAUTION:
Do not place the AC power cord under the TV set or other heavy items.
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with
liquids, such as vases, should be placed on the product.
CAUTION: Please read all of these instructions before you operate your television and save
these instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4. Do not use this television equipment near water for example, near a bath tub, washbowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7. Wall or shelf mounting should follow the manufacturers instructions, and should use a
mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
insure reliable operation of the television equipment and to protect it from overheating, these openings must
not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a
bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat
this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
IMPORTANT SAFEGUARDS
32C240(01-04) 03.11.28, 1:24 PM3
4
Dimension: 140mm x 215mm
IMPORTANT SAFEGUARDS (Continued)
13. Follow all warnings and instructions marked on the television equipment.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the
National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
15. For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance this indicates a need for
service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NECNATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
32C240(01-04) 03.11.28, 1:24 PM4
5
Dimension: 140mm x 215mm
TV
Supplied Accessories
Size AA
Dry Batteries
Infrared Remote Control
RRMCG1324CESC
Note:
Location
For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are
unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
If the set is not going to be used for a long period, such as during a vacation, unplug the set from the
wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the
radio.
If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Inserting the batteries
With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two
batteries (size “AA”). Be sure to match the battery m/, terminals with the m/, marks inside the
compartment.
Before Operating Your Television
Battery
Cover
Pull up
Antennas
The antenna requirements for good color television reception are more important than those for black
& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
Antenna Connections
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
1. A 75-ohm system is generally a round cable with
F-type connector that can easily be attached to
a terminal without tools (not supplied).
2. A 300-ohm system is a flat “twin-lead” cable that
can be attached to a 75-ohm terminal through a
300/75-ohm ADAPTOR (not supplied).
32C240(05-06) 03.11.28, 0:37 PM5
6
Dimension: 140mm x 215mm
CABLE TV (CATV) CONNECTION
A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by
the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s
channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
Note:
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
OUTDOOR ANTENNA CONNECTION
Refer to one of the following two diagrams when connecting to an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.
A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna
Antenna Connections (Continued)
OUT
A
IN
B
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
F-type connector
75-ohm coaxial cable
When connecting the RF cable to the TV set, do not
tighten F-type connector with tools.
If tools are used, it may cause damage to your TV
set.
(The breaking of internal circuit, etc.)
F-type connector should be finger-tightened only.NOTICE
32C240(05-06) 03.11.28, 0:37 PM6
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
(Not supplied)
or
REAR OF TV
REAR OF TV
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
7
Dimension: 140mm x 215mm
Quick Reference Control Operation
Part Names
Front Panel
Quick Reference Control Operation
IN 2
TV
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
Changes or selects the TV
adjustments on On-Screen Displey.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
4 seconds.
Press again Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
See pages 2729 for Channel
Setting.
• Moves the E ” mark on the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
When sound is muted, CLOSED
CAPTION appears if available.
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
VIDEO/AUDIO TERMINALS
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
INPUT
Press Switches to external video
INPUT 1 mode.
Press twice Switches to external video
INPUT 2 mode.
Press 3 times Switches back to the
original TV mode. See page 32.
Note:
The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual
appearance.
POWER
Press On.
Press again Off.
REMOTE CONTROL
SENSOR
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
32C240(07) 03.11.28, 0:41 PM7
8
Dimension: 140mm x 215mm
When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before pressing the
POWER button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See pages 5, 6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE screen will be
displayed.
2 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”.
3 Press VOL k/l to access the EZ SETUP screen.
4 Press VOL k.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press VOL l and it will be canceled.
If you want to SET UP again, please refer to page
26 on SET UP.
To cancel EZ SETUP
Press VOL l.
5 Once EZ SETUP is complete, the lowest channel number
memorized will be displayed.
Note:
If EZ SETUP does not memorize all the channels in your region, please refer to pages 2729 for
more information on manually memorizing the channels using CHANNEL SETTING.
It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occurring around the area. Please refer to pages 2729 for more
information on manually memorizing the channels using CHANNEL SETTING.
POWER
(EZ SETUP screen)
EZ SETUP during First Use
(On the Set)
(On the Remote Control)
(SELECT LANGUAGE screen)
(START)
(STOP)
POWER
CHANNEL
UP (a)/
DOWN (s)
VOLUME
(
k
)/(
l
)
32C240(08-09) 03.11.28, 0:42 PM8
FR NCA I S
ENGL I SH
ESPAÑOL
LANGUAGSELECT E
A
SE ECT : CH 8 / 9
VO
L
SE :TL+/
FR NCA I S
ENGL I SH
ESPAÑOL
LANGUAGSELECT E
A
SE ECT : CH 8 / 9
VO
L
SE :TL+/
OR CAB L E .
TSART SETUP?ZE
ANTENNCONNECT A
YE : VOL+
VOL
S
NO :
AU
18
TO RGGAMM I NORP
WA I TPLE EAS
VOL
TSOP:
2
9
Dimension: 140mm x 215mm
Demo Mode
To learn more about the TV set, you can enter DEMO mode. Simply
press and hold MENU on the TV set for more than 3 seconds.
To cancel DEMO mode, again press MENU on the TV set for more
than 3 seconds.
Example:
DEMO mode display
Accessing the MAIN MENU screen without Remote Control
If you misplaced your Remote Control you can still access most settings
via the MAIN MENU screen by pressing MENU on the TV set.
Some features of your TV set are not accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service
Center for a replacement.
(On the Set)
(On the Set)
MENU
button
MENU
button
32C240(08-09) 03.11.28, 0:42 PM9
10
Dimension: 140 X 215 mm
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s
to move the mark to “SET UP”.
3 Press VOL k/l to access the SET UP screen, then press CH a/s
to move the mark to “LANGUAGE”.
4 Press VOL k/l to access the LANGUAGE select screen.
5 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”.
6 Press MENU to exit.
Sleep Timer
You can preset your television to turn off automatically in increments of 30, 60, 90, or 120 minutes.
1 Press MENU to access the MAIN MENU screen.
2 Press VOL k/l to access the SLEEP TIMER screen.
3 Press VOL k/l to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press MENU to exit.
Note:
To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”
during step 3.
While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER
turns off the TV, the screen prompts the time remaining for 4 seconds. The SLEEP TIMER shows a
similar display for each remaining minute and a 10-second display right before shutting off the TV.
If you turn the POWER OFF, the SLEEP TIMER will automatically reset.
Language
(SLEEP TIMER screen)
(LANGUAGE select screen)
(MAIN MENU screen)
(SET UP screen)
32C240(10-11) 03.11.28, 0:42 PM10
SL EPETIERM
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
BL E SCREENU
LANGUAGE
INGCH SETT
FR NCAIS
ENGL ISH
ESPAÑOL
LANGUAGE
A
FR NCAIS
ENGL ISH
ESPAÑOL
IDIOMA
A
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
SL EP T IMERE
120 RE AIMN
11
Dimension: 140 X 215 mm
Description of Adjustment Items
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/ s
to move the mark to VIDEO ADJUST.
3 Press VOL k/l to access the PICTURE adjust screen.
4 Press CH a/s
to select the desired adjustment item. (Refer to the
diagram below.)
5 Press VOL k/l to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press MENU to exit.
Note:
VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1 and INPUT 2 modes.
(PICTURE adjust screen)
VOL k
increases contrast
VOL l
decreases contrast
(MAIN MENU screen)
Video Adjust
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
PICTURE
TINT
COLOR
SHARP
COLOR TEMP.
RESET
: CH s
: CH a
BRIGHT
Selected item VOL
k
button VOL
l
button
PICTURE To increase contrast To decrease contrast
TINT To make skin tones greenish To make skin tones purplish
COLOR To increase color intensity To decrease color intensity
BRIGHT To increase brightness To decrease brightness
SHARP To increase sharpness To decrease sharpness
RESET To return all adjustments to factory preset levels.
27C240 11
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
ICTUR
E
+
P
50
ICTUR
E
+
P
27
COLOR TEMP. To choose a RED, BLUE or STANDARD COLOR TONE.
12
Dimension: 140 X 215 mm
H MTS (Multichannel TV Sound)
This function allows reception of stereo or bilingual TV sound.
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
Stereo broadcasts
Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo sound.
SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
If stereo sound is difficult to hear.
You can obtain clearer sound by manually switching to fixed monaural mode.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s
to move the mark to AUDIO SELECT”.
3 Press VOL k/l
to access the AUDIO SELECT screen.
4 Press VOL k/l
to select “STEREO”, “SAP” or “MONO” when the
mark is at “MTS” position.
Audio Select
(MAIN MENU screen)
(AUDIO SELECT screen)
(AUDIO SELECT
screen
)
MTS
STEREO
SAP
MONO
32C240(12-13) 03.11.28, 0:43 PM12
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
SELECT
: SAPMTS
AUD I O
SELECT
: STEREOMTS
AUD I O
5
Press MENU to exit.
An example screen displaying ON AIR when receiving STEREO broadcasts
Current channel number
ON AIR will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
Note:
Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
Selecting MTS while receiving video signals from INPUT terminals does not change the type of
sound; in this case, sound is determined by the video source.
21
STEREO
SAP
ON
ON
AIR
AIR
MONO
(CHANNEL call on screen)
13
Dimension: 140 X 215 mm
How to set CLOSED CAPTION
Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows conversations, narration, and sound
effects in TV programs and home videos to appear as captions on the
TV screen (see the illustration).
Not all the programs and videos will offer closed captioning. Please
look for the “ symbol to ensure that captions will be shown.
Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2.
The CAPTION mode shows subscripts of dialogs and commentaries
of TV dramas and news programs while allowing clear view of the
picture.
The TEXT mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s
to move the mark to CLOSED CAPTION.
3 Press VOL k/l to access the CLOSED CAPTION setting screen.
4 Press CH a/s
to move the mark to either MODE or DATA.
5 Press VOL k/l to change the CLOSED CAPTION setting.
6 Press MENU to exit.
Note:
If a broadcast contains CLOSED CAPTION and the MUTE button is pressed, the set enters CAPTION
mode automatically. Pressing MUTE again will return the set to its previous condition.
Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your TV.
If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become
dark and blank for some programs. Should this occur, switch the Closed Caption mode to OFF.
CAPTION
TEXT
OFF
CH 1
CH 2
Closed Caption
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
(MAIN MENU screen)
(CLOSED CAPTION setting screen)
MODE :
DATA :
32C240(14-16) 03.11.28, 0:47 PM14
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
CAPT IONCLOSED
MODE : CAP
DATA :CH 1
TION
CAPT IONCLOSED
MODE : CAP
DATA :CH 1
TION
CAPT IONCLOSED
MODE : CAP
DATA :CH 1
TION
14
Dimension: 140 X 215 mm
1. User setting 2. Block table
PG
age
based
not to
block
not to
block
Select
block
auto-
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
BLOCK
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
1. User setting 2. Block table
PG
age
based
not to
block
not to
block
not to
block
Select
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
Parent Control (V-CHIP Operation)
H V-CHIP
This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
Restriction of TV programs includes two characters that contain information about the programs MPAA
rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted
by age and contents.
Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G GENERAL AUDIENCES. All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for
children under 13.
R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
X X Rating is an older rating that is unified with NC-17 but may be encoded on
older movies data.Note:
MPAA RATING
Example 1:
PG-13 in the age-based rating is blocked, this
will automatically block the higher ratings R,
NC-17, X also.
Note:
MPAA RATING is only age-based.
[2] TV PARENTAL GUIDELINES
content based
AGE D L S V FV
(Sexually (Adult (Sexual (Violence) (Fantasy
Suggestive Language) Situation) Violence)
Dialog)
TV-Y (All children)
V
––
TV-Y7 (Direct to Older Children)
V
––
V
TV-G (General Audience)
V
––
TV-PG (Parental Guidance
V V V V V
Suggested)
TV-14 (Parents Strongly
V V V V V
Cautioned)
TV-MA (Mature Audience Only)
V
V V V
V
: Content Rating can be set.
l : Content Rating cannot be set (not normally broadcast by TV station).
Example 2:
R in the age-based rating is blocked, this will
automatically block the higher rating NC-17, X
also.
age
based
RATING
age
based
32C240(14-16) 03.11.28, 0:47 PM15
15
Dimension: 140 X 215 mm
Parent Control (V-CHIP Operation) (Continued)
TV PARENTAL GUIDELINES (Example)
Example 1.1 : Age Based setting
Clear
V
s (block) from each "AGE" box for all ratings.
This will automatically unblock everything.
Example 1.2 : Age Based setting
For TV-G put a
V
in the "AGE" box. This will automatically block the
higher age ratings TV-PG, TV-14 and TV-MA as well as TV-G.
Please note the content ratings D, L, S, V are automatically blocked
as well.
Example 2.1 : Content Based setting
If you choose to unblock every content-based items (D, L, S, V),
clear the
V
(block) from each AGE box of TV-PG, TV-14 and TV-
MA.
Example 2.2 : Content Based setting
Put a
V
in the box corresponding to TV-PG (row) and V (Violence)
(column). This will automatically block the V boxes for TV-14 and
TV-MA. Setting only TV-PG-V, TV-14-V or TV-MA-V will not block
all programs rated TV-PG, TV-14 or TV-MA.
Example 3 : Resetting an Age Based setting
For TV-14, put a
V
(block) in the AGE box.
This will again automatically block the content ratings D, L, S, V
for TV-MA as well as TV-14 (D is not available for TV-MA).
Please note that the lower age rating TV-PG does not change from its
previous settings after this.
Note:
Content ratings can be modified but only in the combinations indicated by
V
in the table on page 14.
Changing a lower age ratings content setting to BLOCK automatically changes the same higher age
ratings content setting to BLOCK regardless of their previous settings.
Changing a lower ratings AGE setting to BLOCK automatically changes all higher ratings to BLOCK
regardless of their previous settings.
For TV-Y7, TV-PG, TV-14 and TV-MA, if you clear the
V
in the AGE box (unblock) you can still
change settings based on content.
Clearing a higher ratings age or content setting will not clear lower settings. Make sure that all undesired
boxes are blocked.
[3] ADDITIONAL MODE
Besides MPAA RATINGS and TV PARENTAL GUIDELINES, new ratings systems data can be
downloaded when they become available. (See page 19.)
TVY
TVY7
TVG
TVPG
TV 14
TVMA
MENU : RETURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
TVY
TVY7
TVG
TVPG
TV 14
TVMA
MENU : RETURN
GAE
D
L
S
V
V
VVVV
VVVV
VVV
V
V
V
V
:
:
BLOCK
VIEW
FV
TVY
TVY7
TVG
TVPG
TV 14
TVMA
MENU : RETURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
TVY
TVY7
TVG
TVPG
TV 14
TVMA
MENU : RETURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
V
V
V
TVY
TVY7
TVG
TVPG
TV 14
TVMA
MENU : RETURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
V
V
V
V
V
V
V
V
V
32C240(14-16) 03.11.28, 0:48 PM16
16
Dimension: 140 X 215 mm
How to set V-CHIP
[1] MPAA RATING
1 Press MENU to access the MAIN MENU screen.
2 Press CH
a/s to move the mark to PARENT CONTROL”.
3 Press VOL
k/l to access the PARENT CONTROL screen.
4 Press VOL
k/l to access the V-CHIP select screen.
Note:
If SECRET No. is already set, enter the SECRET No.
(See
To change the V-CHIP BLOCK after
registering a secret No. on page 22.).
5 Press VOL
k/l to select “MPAA”. Press CH
a/s to move the
mark to “PG”, then press VOL
k/l to select BLOCK. If you
set “PG” to BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically
blocked.
6 Press MENU to return to the V-CHIP select screen.
(PARENT CONTROL screen)
(V-CHIP select screen)
(MAIN MENU screen)
VOLUME
(
k
)/(
l
)
CHANNEL
UP (a)/
DOWN (b)
MENU
Parent Control (V-CHIP Operation) (Continued)
32C240(17-18) 03.11.28, 0:48 PM17
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
IP BLOCK
V C
H
TIMER
VIE
W
PARENT CONTROL
MP AA
TV GUIDELINES
AD : OFFDOWNLO
STATUS :OFF
G
PG
PG13
R
NC17
X
B:LOCK
B:LOCK
B:LOCK
B:LOCK
B:LOCK
:
MENU : RETURN
17
Dimension: 140 X 215 mm
7 Press MENU, then INPUT SECRET No. will be displayed.
Note:
If SECRET No. is already set, skip to step 9.
8 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.
9
When done, press MENU
to exit.
Note:
If you set G to BLOCK , all ratings are automatically blocked.
If you set X to BLOCK, G, PG, PG-13, R and NC-17 are not blocked.
[2] TV GUIDELINES
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH
a/s to move the mark to TV GUIDELINES.
5 Press CH
a/s to move the mark to the desired content item
and then press VOL
k/l to select either BLOCK or “– –”
(unblock).
6 Press MENU
to return to the TV GUIDELINES screen.
7 Repeat steps 4 to 6 until all ratings and their contents are set.
8
When done, press MENU
to return to V-CHIP selct screen.
9 Press MENU to exit.
Note:
If SECRET No. is not set, enter a SECRET No. as show in steps 7 and 8 of [1] MPAA RATING.
Parent Control (V-CHIP Operation) (Continued)
(TV GUIDELINES screen)
(CONTENT RATING screen)
(V-CHIP select screen)
I NPUT
––––
SECRET No .
I NPUT
1234
SECRET No .
321
654
987
100
0
ENTER
32C240(17-18) 03.11.28, 0:49 PM18
MP AA
TV GUIDELINES
AD : OFFDOWNLO
STATUS :OFF
TVY
TVY7
TVG
TVPG
TV14
TVMA
MENU : RETURN
G
AE
D
L
S
V
V
VVVV
V
VVV
VVV
V
V
V
V
VV
:
:
BLOCK
VIE
W
FV
A
TVY7
D
GE
L
S
V
V
F
:
:
:
:
:
BLOCK
BLOCK
:
–––––
–––––
–––––
–––––
MENU : RETURN
TVY
TVY7
TVG
TVPG
TV14
TVMA
MENU : RETURN
G
AE
D
L
S
V
V
VVVV
V
VVV
VVV
V
V
V
V
:
:
BLOCK
VIE
W
FV
18
Dimension: 140 X 215 mm
Parent Control (V-CHIP Operation Continued)Parent Control (V-CHIP Operation) (Continued)
[3] Downloading additional rating mode
There will be an additional new rating system. In that case,
please set up as follows. Subsequently the new rating
system will set up automatically.
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH a/s to move the mark to “DOWNLOAD”.
3 Press VOL k/l to select “DOWNLOAD : ON”.
4 Press MENU, then “INPUT SECRET No. will be displayed.
Note:
If SECRET No. is already set, skip to step 6.
5 Enter a 4-digit secret No. using the REMOTE KEYPAD.
6 Press MENU to exit.
Downloading V-CHIP data
1 If you watch a program containing “new rating system data”, the
DOWNLOAD screen will be displayed.
2 The DOWNLOAD screen will disappear, once downloading is finished.
Note:
DOWNLOAD will not start, if you are not watching a program containing “new rating system data”.
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
REMOTE
KEYPAD
MENU
I NPUT
––––
SECRET No .
I NPUT
1234
SECRET No .
321
654
987
100
0
ENTER
(DOWNLOAD screen)
32C240(19-22) 03.11.28, 0:50 PM19
PL AESE AWTI
NOW DOWNLOADI
VCH IP DATA
NG
19
Dimension: 140 X 215 mm
How to set additional rating mode (Example)
Once downloading is complete, you can set the blocking pattern as follows.
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH a/s to move the mark to Cdn. English Ratings,
then press VOL k/l.
3 You can select BLOCK or “– –” (unblock) for each rating
item by pressing CH a/s and VOL k/l.
4 You can select BLOCK or “– –” (unblock) for each rating
item by pressing CH a/s and VOL k/l if you select Cdn. French
Ratings in step 2.
Note:
You are able to download up to 4 different rating systems.
(After downloading the
rating data)
(ENGLISH INDIVIDUAL
BLOCK screen)
(FRENCH INDIVIDUAL
BLOCK screen)
Parent Control (V-CHIP Operation) (Continued)
32C240(19-22) 03.11.28, 0:50 PM20
MPAA
TV GUI
Cdn .
DO
W
NL
nEglis Rhatinsg
Cdn .
rFenchRatinsg
EDLINES
OAD : ON
STATU
S:ON
C
C8+
G
PG
14+
18+
INDIV
B:LOCK
:
B:LOCK
:
B:LOCK
:
IDUAL BL
MENU : RETURN
OCK
G
8+
13+
16+
18+
INDIV
:
B:LOCK
:
B:LOCK
:
IDUAL BL
MENU : RETURN
OCK
20
Dimension: 140 X 215 mm
Activating the V-CHIP BLOCK
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH a/ s to move the mark to STATUS. Press
VOL k/l to activate the V-CHIP BLOCK. (If STATUS is OFF, V-
CHIP BLOCK will not operate.)
3 Press MENU, then INPUT SECRET No. will be displayed.
Note:
If SECRET No. is already set, skip to step 5.
4 Enter a 4-digit secret No. using the REMOTE KEYPAD.
5 Press MENU and the secret No. will be registered.
To temporarily cancel the V-CHIP BLOCK
1 V-CHIP HAS BEEN ACTIVATED appears if you view a program
with the same program rating data you configured.
Note:
•“V-CHIP HAS BEEN ACTIVATED will not be displayed if STATUS is not configured to ON.
2 Press MENU, then INPUT SECRET No. will be displayed.
3 Enter the 4-digit secret No. using the REMOTE KEYPAD, then V-
CHIP BLOCK will be canceled temporarily. If the wrong secret No.
is chosen, SECRET No. IS INCORRECT will be displayed. Input
the secret No. again in this case.
Note:
If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again.
Parent Control (V-CHIP Operation) (Continued)
(V-CHIP select screen)
321
654
987
100
0
ENTER
321
654
987
100
0
ENTER
32C240(19-22) 03.11.28, 0:50 PM21
MPAA
TV GUI
DO
W
NL
EDLINES
OAD : OFF
STATU
S:ON
NIPUT SECRET No.
2 3 4
1
NIPUT SECRET No.
AC I VATEDT
VCH HIP AS BEEN
23
TV Y7
FV
NIPUT SECRET No.
NIPUT SECRET No.
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH a/ s to move the mark to STATUS. Press
VOL k/l to activate the V-CHIP BLOCK. (If STATUS is OFF, V-
CHIP BLOCK will not operate.)
21
Dimension: 140 X 215 mm
To change the V-CHIP BLOCK after registering a secret No.
1 Repeat steps 1 to 4 of [1] MPAA RATING, then INPUT SECRET
No. will be displayed.
2 Enter the 4-digit secret No. using the REMOTE KEYPAD and
the V-CHIP select screen will be displayed. Set V-CHIP BLOCK
again.
If you forget or need to change your secret No., clear the original secret No. and set
up a new one.
1 Repeat steps 1 to 4 of [1] MPAA RATING, or 1 to 2 of To
temporarily cancel the V-CHIP BLOCK, then INPUT SECRET
No. will be displayed.
2 Press and hold both VOL k and CH on the TV set
simultaneously until the message INPUT SECRET No.
disappears.
3 Press the MENU button twice to exit.
321
654
987
100
0
ENTER
Parent Control (V-CHIP Operation) (Continued)
(On the Set)
VOL k and CH
buttons
NIPUT SECRET No.
NIPUT SECRET No.
s
s
22
Dimension: 140 X 215 mm
H VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration while the TV power is on.)
VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10
hours) in 30 minutes intervals.
OFF TIME (Restricts TV viewing after the VIEWING TIME reaches
zero.)
OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)
in 30 minutes intervals.
STATUS (Select ON to activate VIEW TIMER)
How to set VIEW TIMER
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/ s
to move the mark to PARENT CONTROL.
3 Press VOL k/l to access the PARENT CONTROL screen.
4 Press CH a/ s
to move the mark to VIEW TIMER.
5 Press VOL k/l to access VIEW TIMER.
6 Press CH a/s
to select VIEWING TIME and OFF TIME. For
each selection, press the VOL k/l to set the time duration.
7 Press CH a/s
to select STATUS. Press the VOL k/l to turn
ON the VIEW TIMER. (If STATUS is OFF, VIEW TIMER will not
operate.)
8 Press MENU. INPUT SECRET No. will be displayed.
Note:
If SECRET No. is already set, skip to step 10.
Parent Control (VIEW TIMER)
(MAIN MENU screen)
(PARENT CONTROL screen)
32C240(23-26) 03.11.28, 0:57 PM23
VI
W
TIMER
ST TAUS
E
VI
W
ITIME
:OFF
EGN
––––H
––––H
OFF TIME
M
M
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
IP
BLO
CK
V C
H
TIMER
VIE
W
PARENT CONTROL
VI
W
TIMER
ST TAUS
E
VI
W
ITIME
:OFF
EGN
––––H
––––H
OFF TIME
M
M
VEWT
2H
IIMER
00M
OFF
STATU
VEWINGITIME
TIME
––H ––M
S:OFF
VEWT
2H
IIMER
00M
OFF
STATU
VEWINGITIME
TIME
5H 00M
S:ON
NI PUT SECRET No .
23
Dimension: 140 X 215 mm
Parent Control (VIEW TIMER) (Continued)
9 Enter the 4-digit secret No. using the REMOTE KEYPAD.
10
Press MENU, and secret No. is registered.
Example:
To restrict anybody from watching TV for more than 5 hours, after watching
the TV for 2 hours, your settings would look like the one on the right.
You can choose to watch the 2 hours of TV as you wish. For example, you
could watch 1 hour of TV, turn the TV off for 30 minutes, then turn the TV
on and watch the remaining 1 hour of the VIEWING TIME.
To change the VIEW TIMER setting after registering a secret No.
1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press
VOL k /l, and INPUT SECRET No. will be
displayed.
2 Enter the 4-digit secret No. using the REMOTE
KEYPAD, and the VIEW TIMER access screen will
be displayed. Repeat steps 5, 6.
Note:
When you choose the correct secret No., the VIEW TIMER access screen
is displayed. If the wrong secret No. is chosen, SECRET No. IS
INCORRECT is displayed. Input the secret No. again in this case.
To cancel the VIEW TIMER (While the TV set is OFF but the VIEW
TIMER is set.)
1 Turn on the TV; a blue screen message TIME OVER will appear. If
you do nothing, the TV will turn off in approximately 30 seconds.
2 Enter the 4-digit secret No. using the REMOTE
KEYPAD. When you choose the correct secret No.,
the VIEW TIMER is canceled. If the wrong secret No.
is chosen, SECRET No. IS INCORRECT is
displayed. Input the secret No. again in this case.
321
654
987
100
0
ENTER
321
654
987
100
0
ENTER
321
654
987
100
0
ENTER
32C240(23-26) 03.11.28, 0:57 PM24
2 3 4
1
NI PUT SECRET No .
VEWT
2H
IIMER
00M
OFF
STATU
VEWINGITIME
TIME
5H 00M
S:ON
NI PUT SECRET No .
I PUT ESN CRET No .
∗∗
RRECT
INC
O
S
ECRET No . I S
TMEO
I VER
I PUT ESN CRET No .
–––
TMEOI VER
I PUT ESN CRET No .
∗∗∗
24
Dimension: 140 X 215 mm
Parent Control (VIEW TIMER) (Continued)
To cancel the VIEW TIMER setting or change the secret No. (If you
forget the SECRET No.)
1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press
VOL k/l , and INPUT SECRET No. will be
displayed.
2 Press and hold both VOL k and CH on the TV set
simultaneously until the VIEW TIMER access screen is displayed.
Now you can cancel the VIEW TIMER settings or change the secret
No. while INPUT SECRET No. is displayed.
Notice of Remaining VIEWING TIME
For every 30 minute interval, the remaining time will be displayed for
4 seconds. For the last 5 minutes, the remaining time will be displayed
every minute.
•“0 REMAIN will be displayed for 10 seconds just before the VIEWING
TIME expires.
REMAIN
30M
VIEWING TIME
0H
REMAIN
05M
VIEWING TIME
0H
REMAIN
0
VIEWING TIME
(On the Set)
VOL k
and CH
buttons
27C240 24
NI PUT SECRET No .
s
s
25
Dimension: 140 X 215 mm
Energy Save
This feature lets you lower the power consumption of your TV
set which in turn saves you money and minimizes the impact on
the environment. When this feature is turned on, it reduces the
brightness of the TV to a level that consumes approximately 20
percent less energy than when the feature is turned off.
The reduction in brightness will be less noticeable under low
room lighting conditions.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/ s
to move the mark to ENERGY SAVE.
3 Press VOL k/l to access the ENERGY SAVE select screen.
4 Press VOL k/l to select ON.
5 Press MENU to exit.
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
(MAIN MENU screen)
(ENERGY SAVE select screen)
32C240(23-26) 03.11.28, 0:57 PM26
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
:OFF
EN REGYSAVE
:ON
EN REGYSAVE
26
Dimension: 140 X 215 mm
H EZ Setup
By operating the channel preset functions, you can preset your
TV to the desired channels for viewing.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/ s to move the mark to “SET UP”.
3 Press VOL k/l to access the SET UP screen, then press
CH a/ s to move the mark to “CH SETTING”.
4 Press VOL k/l to access the CH SETTING screen.
5 Press VOL k/l to access the EZ SETUP screen.
6 Press VOL k.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press VOL l. Search will be canceled.
To cancel EZ SETUP
Press VOL l.
7 Once EZ SETUP is complete, the lowest channel number
memorized will be displayed.
Set Up
(MAIN MENU screen)
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
(EZ SETUP screen)
(CH SETTING screen)
(SET UP screen)
(START)
(STOP)
32C240(27-28) 03.11.28, 0:56 PM27
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
T
BL E SCREENU
LANGUAGE
INGCH SE T
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
OR CABLE .
TSART SETUP?ZE
ANTENNCONNECT A
YE :VOL+
VOL
S
NO :
AU
18
TO RGGAMM I NORP
WA I TPLE EAS
VOL
TSOP:
2
27
Dimension: 140 X 215 mm
Set Up (Continued)
H Channel Setting
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/ s to move the mark to SET UP.
3 Press VOL k/l to access the SET UP screen.
4 Press CH a/ s to move the mark to CH SETTING.
5 Press VOL k/l to access the CH SETTING screen.
6 Press CH a/ s to move the mark to AIR/CABLE, then press
VOL k/l to access the AIR/CABLE screen.
7 Press CH a/ s to move the mark to the desired mode.
8 Press MENU to exit.
Note:
Receivable channels of your TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC mode only)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
(MAIN MENU screen)
(CH SETTING screen)
(SET UP screen)
(AIR/CABLE screen)
AIR
CABLE STD
CABLE HRC
CABLE IRC
32C240(27-28) 03.11.28, 0:56 PM28
VIDEO ADJUST
ELECTAUDIO S
SET UP
CAPT IONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
T
BL E SCREENU
LANGUAGE
INGCH SE T
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
H SEARCH
EZ SETUP
AI /CABLER
C
HMEMORYC
AI
ABLE STD
R
AI /CABLER
C
ABLE HRCC
ABLE IRCC
28
Dimension: 140 X 215 mm
Saving broadcast TV channels into memory
1 Press MENU to access the MAIN MENU
screen, then press CH a/ s to move the
mark to “SET UP”.
2 Press VOL k/l to access the SET UP
screen, then press CH a/ s to move the
mark to “CH SETTING”.
3 Press VOL k/l to access the CH SETTING
screen.
4 Press CH a/ s to move the mark to “CH
SEARCH”, then press VOL k/l to access
the CH SEARCH screen.
To start:
Press VOL k. The tuner will search through
all available channels in your area and add
them into the TV memory.
To stop:
Press VOL l. CH SEARCH will stop at the
current channel and will not add any higher
channels.
5 Press MENU to exit.
Note:
If you press VOL k again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels will
be lost.
Adding weak or additional channels or erasing unwanted channels from TV memory
1 Press MENU to access the MAIN MENU
screen, then press CH a/ s to move the
mark to “SET UP”.
2 Press VOL k/l to access the SET UP
screen, then press CH a/ s to move the
mark to “CH SETTING”.
3 Press VOL k/l to access the CH SETTING
screen.
4 Press CH a/ s to move the mark to “CH
MEMORY”, then press VOL k/l to access
the CH MEMORY screen.
5 Use CH a/s or REMOTE KEYPAD to select
each desired channel to add or erase.
(START)
(STOP)
or
321
654
987
100
0
ENTER
Set Up (Continued)
(CH SETTING screen)
(CH SETTING screen)
(CH SEARCH screen)
32C240(29-30) 03.11.28, 0:56 PM29
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
2
AR +T:
TO P:
AIR
CH SEARCH
ST
S
1
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
29
Dimension: 140 X 215 mm
H BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/ s to move the mark to SET UP.
3 Press VOL k/l to access the SET UP screen.
4 Press VOL k/l to access the BLUE SCREEN select screen.
5 Press VOL k/l to select ON.
6 Press VOL k to add a channel to the TV
memory or press VOL l to erase a channel
from the TV memory.
7 Press MENU to exit.
VOL k
To add channel 12 to
the TV memory
VOL l
To erase channel 12 from
the TV memory
(CH MEMORY
memorized channel)
(CH MEMORY
unmemorized channel)
(MAIN MENU screen)
(SET UP screen)
(BLUE SCREEN select screen)
Set Up (Continued)
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
32C240(29-30) 03.11.28, 0:56 PM30
D+:
AIR
C
H MEMORY
ADTO
21
E :
AIR
CH MEMORY
ESTO AR
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EPETIERM
LANG GEUA
BL E NSCREEU
CH SETT I NG
:OFF
BL EUSCREEN
:ON
BL EUSCREEN
30
Dimension: 140 X 215 mm
6 Press MENU to exit.
Note:
Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
While INPUT 1 2 is selected, the BLUE SCREEN will not be shown even if the
BLUE SCREEN is turned on.
Set Up (Continued)
27C240 30
or
31
Dimension: 140 X 215 mm
DVD
CAMCORDER
TV GAME
VCR
Yellow : To video input terminal
White : To audio input (L) terminal
Red : To audio input (R) terminal
(Front connection
terminals of TV)
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
To VIDEO OUTPUT
Using the Video and Audio Input Terminals
VIDEO EQUIPMENT
Connecting video equipment for playback of video material.
To view video material from external video equipment, make sure to connect the equipment properly
to the input terminals on the TV set.
Connecting video device equipped with video output terminals
CONNECTIONS
32C240(33-34) 03.11.28, 0:58 PM33
(Rear connection
terminals of TV)
To VIDEO
OUTPUT
To AUDIO
OUTPUT (L)
To AUDIO OUTPUT (R)
32
Dimension: 140 X 215 mm
Using the Video and Audio Input Terminals (Continued)
To watch video material playback
Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you
wish to play.
The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.
INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV is
set to the highest channel stored in memory, or by pressing the CH s when it is set to the lowest
channel.
When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
The S-Video terminal has priority over the VIDEO terminal (IN 1). When you wish to use video equipment
connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal.
It is the intent of SHARP that this product be used in full compliance with the copyright law of the
United States and that prior permission be obtained from copyright owners whenever necessary.
For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
The connection cables/cords can be obtained from your local video store.
Note:
Notes:
The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals.
The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio
cable to the IN 1 AUDIO terminals (left and right).
32C240(33-34) 03.11.28, 0:58 PM34
VIDEO EQUIPMENT
(Rear connection
terminals of TV)
To S-VIDEO OUTPUT
(When your video
equipment has an S-VIDEO
output terminal)
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
separated into color and brightness signals.
AIR
or
CABLE
INPUT 1
(IN 1)
Rear
INPUT 2
(IN 2)
Front
33
Dimension: 140mm x 215mm
Before Calling for Service
Check these items and see if you can correct the trouble with a slight adjustment of the controls.
QUICK SERVICE
CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then there
is a possible station trouble.
Is TV plugged in? Power at outlet?
Is TV’s POWER button on?
Is antenna connected to terminal on
the back of the set?
If outside antenna is being used,
check for broken wire.
Check for local interference or
external electrical noise.
Turn off the POWER and then turn it
on after about a minute.
Adjust COLOR control.
Adjust PICTURE control.
Check external Video/Audio products:
look for loose/broken connection
leads. (Refer to pages 31, 32)
Check batteries of Remote Control.
Change Closed Caption mode to
“OFF”/Energy Save mode to “OFF”.
Unplug the TV and plug it in again
after 2 minutes or longer.
XXXXXXX X XXXXXXXXX X
X XXXXXX X XXXXXXX XX X
X X XXXXX X XXXXXXX XX X
XXXXXXXXXX X X X X X XX X
XXXXXXX X XXXXXX X XX X
XXXX X X X X X XXX XXXX X X
X X XXXXX X XXXXXXX XX X
XXXXXXX X XXXXXXXX X X
XXXXXXXXX XXXX XXX X X
XXXXXXX X XXXXXXXXX X
XXX
X X XXXXX X XXXXXXXX XX
XXX XXXX X X XXXXXXX X X
PROBLEM
No Playback of VCR and Disc
Player
No Picture or Sound from
External Video/Audio Products
Remote Control Doesn’t Work
Bars on Screen
Picture Distorted
Picture Rolls Vertically
No Color
Poor Reception on Some
Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in Picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Dark and Blank Picture
External Electrical Noise
Interfering with TV’s Operation
Color on Part of the Screen
Appears Distorted
(Dark and Blank Picture)
Note:
If no TEXT broadcast is being received while viewing in the TEXT
mode, the screen may become dark and blank for some programs.
Should this occur, switch the Closed Caption mode to “OFF”.
For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,
or customer assistance, please call 1-800-BE-SHARP.
Calling for Service
32C240(35-36) 03.11.28, 0:59 PM35
34
Dimension: 140mm x 215mm
Specifications
32C240(35-36) 03.11.28, 0:59 PM36
Design and specifications are subject to change without notice.
MODEL 27C240
Receiving System NTSC
Stereo Broadcast MTS (STEREO/SAP)
Reception Channels
AIR VHF 2-13 ch
UHF 14-69 ch
CATV 1-125 ch
Channel Tuning 181-channel Reception PLL tuning system
Antenna Input Impedance VHF/UHF 75 ohm Unbalanced
Screen Size 27˝ Diagonally Measured
Terminals Audio/Video input x 2 (Front x 1, Rear x 1), S-Video input x 1 (Rear)
Sound Output 1.5 W (RMS) x 2
Power Source AC 120 V, 60 Hz
Power Consumption 105 W
Dimensions 25
3
/
4
˝ (W) x 23
41
/
64
˝ (H) x 20
23
/
32
˝ (D)
[654 mm (W) x 600 mm (H) x 526 mm (D)]
Weight (approx.) 70.8 lbs. (32 kg)
35
Dimension: 140mm x 215mm
Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro.
IMPORTANTE
Sírvase anotar el modelo del televisor y los números de serie
en el espacio provisto, para ayudar a reportar en caso de
pérdida o robo. Los números están ubicados en la parte
posterior del televisor.
N° de modelo :
N° de serie :
(ESPAÑOL)
INFORMACIÓN IMPORTANTE
Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor
SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.
PRIMERA – GARANTÍA
Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en cuanto a piezas, servicio
técnico y mano de obra aplicable a su adquisición.
SEGUNDA – ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR
Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre inspección,
modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de
consumidor de 1972. LEA CUIDADOSAMENTE LA CLÁUSULA “GARANTÍA LIMITADA” DE LA ÚLTIMA PÁGINA.
ADVERTENCIA :
PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA
ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD.
PRECAUCIÓN : PARA REDUCIR EL RIESGO DE
DESCARGAS ELÉCTRICAS, NO RETIRE LA CUBIERTA
(NI EL PANEL POSTERIOR).
NO CONTIENE PIEZAS REPARABLES POR EL USUARIO.
SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE
SERVICIO TÉCNICO ESPECIALIZADO.
El relámpago con cabeza de
flecha dentro de un triángulo trata
de indicar al usuario que las partes
dentro del producto representan
riesgo de electrochoque para las
personas.
El signo de exclamación dentro de
un triángulo trata de indicar al
usuario que las instrucciones
importantes de operación y
servicio se encuentran en los
documentos con el aparato.
Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención del
instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene las
directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar
conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.
ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada que
se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad
del usuario para utilizar este equipo.
DESECHO DEL PRODUCTO
Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo.
El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener
información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con
Electronics Industries Alliance: www.eiae.org
32C240(37-39) 03.11.28, 0:59 PM37
36
Dimension: 140mm x 215mm
INFORMACIÓN IMPORTANTE (Continuación)
PRECAUCIÓN:
No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado.
Para impedir un incendio, no ponga nunca ningún tipo de vela o llama al descubierto encima o cerca del
televisor.
Para impedir un incendio o una descarga eléctrica, no exponga este aparato al goteo ni a las salpicaduras.
Tampoco deberán ponerse encima de los productos objetos llenos de líquidos como, por ejemplo, floreros.
MEDIDAS DE SEGURIDAD IMPORTANTES
PRECAUCIÓN : Lea por favor todas estas instrucciones antes de poner en funcionamiento
su televisor, y guárdelas para poder utilizarlas en el futuro.
La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para
garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE
DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar
problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.
1. Desenchufe el televisor del tomacorriente antes de limpiarlo.
2. No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.
3. No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.
4. No utilice el televisor cerca del agua por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en
un sótano húmedo, cerca de una piscina, etc.
5. No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse
causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor
solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con
el televisor.
6. La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas
rápidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la
combinación de televisor y carrito se volteen.
7. Cuando instale el televisor en una pared o en una estantería siga las instrucciones del
fabricante, y utilice el kit de montaje aprobado por el fabricante.
8. Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para
que éste funcione bien y para evitar que se caliente. Estas aberturas no deben taparse nunca. Este televisor
no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación
apropiada.
9. Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no
deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar.
Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.
10. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no
está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien
adquirió el televisor o con la compañía eléctrica local.
En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de
uso.
11. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos.
El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.
Si el enchufe no entra en el tomacorriente, pídale a un electricista que le coloque un tomacorriente nuevo.
No modifique el enchufe porque anulará esta característica de seguridad.
12. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable
pueda ser deformado por personas que caminen sobre él.
32C240(37-39) 03.11.28, 1:00 PM38
37
Dimension: 140mm x 215mm
MEDIDAS DE SEGURIDAD IMPORTANTES
(Continuación)
13. Cumpla con todos los avisos y las instrucciones marcados en el televisor.
14. Si se conecta una antena exterior al televisor, asegúrese de que el sistema de antena esté conectado a
tierra para obtener cierta protección ante los aumentos de voltaje y la acumulación de cargas estáticas.
La sección 810 del Código Eléctrico Nacional ofrece información relacionada con la conexión a tierra
correcta del poste y la estructura de apoyo, la conexión a tierra del cable de entrada a una unidad de
descarga, el tamaño de los conductores de conexión a tierra, la ubicación de la unidad de descarga de
antena, la conexión a los electrodos de conexión a tierra, y los requisitos para el electrodo de conexión a
tierra.
15. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin
utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y
desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la
sobretensión en la línea de alimentación.
16. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de
luces eléctricas o circuitos de alimentación. Tampoco debe ubicarse donde pueda caer sobre tales líneas
o circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado
para no tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal.
17. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o
descarga eléctrica.
18. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o
causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca
ningún tipo de líquido sobre el televisor.
19. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una
descarga de tensión u otros peligros. Las reparaciones debe realizarlas el personal de servicio CALIFICADO.
20. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se
produzcan las condiciones siguientes:
A. Cuando el cable de la alimentación o el enchufe estén estropeados.
B. Cuando haya derramado un líquido sobre el televisor.
C. Si el televisor ha quedado expuesto a la lluvia o al agua.
D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente
los controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles
podría estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que
éste lo repare y lo devuelva a su condición normal.
E. Si el televisor se ha caído o la caja se ha estropeado.
F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio
de reparaciones.
21. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice
comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún
problema.
22. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de
CAMBIO especificadas por el fabricante, aquellas que tengan las mismas características que las piezas
originales. Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u
otros peligros.
32C240(37-39) 03.11.28, 1:00 PM39
28
Dimension: 140mm x 215mm
Nombres de los componentes (ESPAÑOL)
Panel Delantero
Referencia rápida de los controles de operación
IN 2
TV
Funciones Básicas Del Control Remoto
ALIMENTACION (POWER)
Pulsando Enciende (On).
Pulsando nuevamente Apaga (Off).
TECLADO A DISTANCIA
(REMOTE KEYPAD)
Para tener acceso a cualquier
canal empleando las teclas.
RETORNO AL CANAL
ANTERIOR (FLASHBACK)
Para volver al canal anterior.
PREPARACION (MENU)
Pulsando Accede al MENU
PRINCIPAL.
Pulsando nuevamente Sale del
MENU PRINCIPAL.
Ventanilla del transmisor de infrarrojos
VISUALIZACION (DISPLAY)
Pulsando Aparece el canal de
recepción por cuatro segundos.
Pulsando nuevamente Elimina la
visualización.
En el modo de “Closed Caption” se
muestra el canal de recepción por un
corto tiempo.
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(a) Selecciona el siguiente canal superior.
(s) Selecciona el siguiente canal inferior.
Consulte las páginas 27-29 para obtener
información sobre el preajuste de canales.
En el modo de MENU, mueve la marca
E ”.
SILENCIAMIENTO (MUTE)
Pulsando Silencia el sonido.
Pulsando nuevamente Restaura el
sonido.
Cuando se silencia el sonido, CLOSED
CAPTION aparece si se encuentra dis-
ponible.
CANAL SUPERIOR/INFERIOR
(a) Selecciona el siguiente canal
superior.
(s) Selecciona el siguiente canal
inferior.
Terminal (vídeo/audio)
MENU (MENU)
Pulsando Accede al MENU
PRINCIPAL.
Pulsando nuevamente Sale del
MENU PRINCIPAL.
ALIMENTACION (POWER)
Pulsando Enciende (On).
Pulsando nuevamente
Apaga (Off).
AUMENTO/DISMINUCION
DEL VOLUMEN (VOL)
(k) Aumenta el sonido.
(l) Disminuye el sonido.
AUMENTO/DISMINUCION DEL
VOLUMEN (VOLUME UP/DOWN)
(k) Aumenta el sonido.
(l) Disminuye el sonido.
Cambia o selecciona los ajustes de
TV en la visualización en pantalla.
ENTRADA (INPUT)
Pulsando Cambia al modo de entrada 1
del vídeo externo.
Pulsando 2 veces Cambia al modo de
entrada 2 del vídeo externo.
Pulsando 3 veces Vuelve al modo TV
original. Consulte la página 32.
Nota:
Las ilustraciones del televisor y del mando a distancia, y las indicaciones en pantalla, de este manual pueden
diferir de su aspecto real.
SENSOR DE CONTROL
REMOTE
32C240(40) 03.11.28, 1:00 PM40
39
Dimension: 140mm x 215mm
Antes de llamar al servicio de reparaciones
Verifique estos puntos para ver si usted mismo puede solucionar el problema.
(Imagen oscura y en blanco)
Nota:
Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la
pantalla puede ponerse en blanco y negro. Si ocurriera esto, ponga el
modo CLOSED CAPTION en OFF.
Solicitud de servicio técnico
Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de
información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.
XXXXXXXXXXXXXXXXX X
X XXXXXXXXXXXXXX XX X
X X XXXXXXXXXXXXX XX X
XXXXXXXXXX X X X X X XX X
XXXXXXXXXXXXXX X XX X
XXXX X X X X X XX X XXXX X X
X X XXXXXXXXXXXXX XX X
XXXXXXX XXXXXXXXX X X
X X XXXXXXX XX XX XXX X X
XXXXXXXXXXXXXXXXX X
XXX XXXXXXXXXXXXX X XX
X
X X XXXXXXXXXXXXXX XX
XXX XXXX XX XX XXXXX X X
POSIBLE SOLUCIÓN
Pruebe con otro canal y si todo está
bien, el problema puede ser de la
emisora.
Está conectado el televisor?
Llega electricidad al tomacorrientes?
Está conectado el interruptor del
televisor?
Está conectado la antena al terminal del
panel posterior del televisor?
Si utiliza una antena exterior, cerciórese
de que el cable no esté dañado.
Compruebe si hay interferencia local.
Desconecte el interruptor POWER y
vuelva a conectarlo después de
transcurrir un minuto.
Ajuste el control de COLOR.
Ajuste el control de MATIZ.
Verifique los productos externos de
Video/Audio, revise si hay fugas de
conexiones sueltas o rotas.
Compruebe el estado de las pilas del
mando a distancia.
Desactive (OFF) el modo CLOSED
CAPTION / Desactive (OFF) el modo
Ahorro de Energía (Energy Save).
Desenchufe el televisor y vuelva a
enchufarlo después de dos minutos o más.
LISTA DE
COMPROBACIONES
DE SERVICIO
RAPIDO
PROBLEMA
El vídeo o el reproductor de discos de
video no reproducen imágenes
El equipo de video/audio externo no
produce imágenes ni sonido
El mando a distancia no funciona
Barras en la pantalla
Imagen distorsionada
La imagen se desplaza verticalmente
No hay color
Mala recepción de algunos canales
Imagen débil
Franjas en la imagen
Imagen fantasma
Imagen borrosa
Sonido adecuado, imagen mala
Imagen adecuada, sonido malo
No hay imagen ni sonido
Imagen oscura y en blanco
Interferencia de ruido eléctrico externo
con el funcionamiento del televisor
El color se ve distorsionado en parte de
la pantalla
32C240(41) 03.11.28, 1:01 PM41
40
Dimension: 140mm x 215mm
Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.
IMPORTANT
Afin de vous aider en cas de perte ou de vol, inscrivez les
numéros de série et de modèle du téléviseur dans les
espaces fournis à cet effet. Ces numéros sont situés à
l’arrière du téléviseur.
N° du modèle :
N° de série :
(FRANÇAIS)
INFORMATIONS IMPORTANTES
Deux raisons importantes d’enregistrer rapidement la garantie de votre nouveau téléviseur SHARP à
l’aide de la carte d’enregistrement (REGISTRATION CARD) incluse dans le colis :
LA PREMIERE – LA GARANTIE
Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du
service et des travaux applicable à votre achat.
LA DEUXIEME – LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION (CONSUMER
PRODUCT SAFETY ACT)
Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du rappel de votre
produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la sécurité du produit de consommation.
LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE LIMITEE» DE LA DERNIÈRE PAGE.
AVERTISSEMENT:
POUR REDUIRE LE RISQUE D’INCENDIE OU D’ELECTROCUTION,
N’EXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES.
ATTENTION : POUR REDUIRE LE RISQUE
D’ELECTROCUTION,
NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).
L’APPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR
PAR L’UTILISATEUR.
CONSULTEZ UN PERSONNEL QUALIFIE POUR
LA MAINTENANCE.
Le symbole de la foudre sous
forme de flèche dans un triangle
est supposé indiquer à
l’utilisateur que les pièces
internes au produit constituent
un risque d’électrocution.
Le symbole du point d’exclamation
dans un triangle est supposé
indiquer à l’utilisateur que des
instructions de fonctionnement et
de maintenance importantes se
trouvent dans la documentation
fournie avec l’équipement.
“Note à l’intention de l’installateur du système CATV : Ce rappel est fourni afin d’attirer l’attention de l’installateur
de système CATV sur l’article 820-40 du National Electrical Code qui indique les règles de mise à la terre
appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au réseau commun de mise à
la terre du bâtiment, au point le plus proche possible de la source.
AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non
autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir
de l’utilisateur sur le fonctionnement de cet équipement.
MISE AU REBUT DU PRODUIT
Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre.
La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour toute
information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions importantes
préconisées par la société Electronics Industries Alliance sur : www.eiae.org.
32C240(42-44) 03.11.28, 1:01 PM42
41
Dimension: 140mm x 215mm
INFORMATIONS IMPORTANTES (Suite)
ATTENTION:
Ne placez pas le cordon d’alimentation sous le téléviseur ou sous tout autre objet lourd.
Ne placez pas de bougies ni de flammes nues sur le téléviseur ou à sa proximité, afin d’éviter les incendies.
Veillez à ne pas éclabousser ni faire tomber de l’eau sur ces appareils afin d’éviter les incendies ou les
électrocutions. Ne placez jamais d’objets remplis de liquide, comme des vases, sur ces appareils.
PRÉCAUTIONS IMPORTANTES
ATTENTION : Veuillez lire toutes ces instructions avant d’utiliser votre télévision et conservez-
les pour un usage ultérieur.
L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de façon
à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER DES
RISQUES D’ELECTROCUTION OU D’INCENDIE. Afin de ne pas détruire les protections intégrées à cet appareil,
respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance.
1. Débranchez la télévision avant de la nettoyer.
2. N’utilisez pas de nettoyants liquides ou d’aérosols et utilisez un chiffon humide.
3. N’utilisez pas d’accessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques.
4. N’utilisez pas cette télévision à proximité d’eau — par exemple, près d’une baignoire, d’un lavabo, d’un
évier ou d’un bac à laver, dans une cave humide ou près d’une piscine, etc.
5. Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber
et provoquer de graves lésions à toute personne et causer de sérieux dommages à l’équipement. Utilisez
uniquement un support ou un chariot recommandé par le fabricant ou vendu avec la
télévision.
6. L’ensemble télévision-chariot doit être déplacé délicatement. Les arrêts brusques, une
force excessive et des surfaces inégales peuvent renverser l’ensemble.
7. L’installation au mur ou sur une tablette doit être réalisée conformément aux instructions
du fabricant et à l’aide d’un kit de montage approuvé par ce dernier.
8. Les fentes et les ouvertures du châssis à l’arrière ou dans la partie inférieure sont prévus pour la ventilation.
Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces ouvertures
ne doivent être ni obturées, ni recouvertes. La télévision ne doit pas être placée dans un endroit encastré
tel qu’une bibliothèque, sauf si une ventilation adéquate est prévue.
9. Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure
ne doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface
similaire. Cette télévision ne doit être placée ni à proximité d’un radiateur ou d’un registre de chaleur, ni
dessus.
10. Cette télévision doit être alimentée uniquement par le type d’alimentation électrique indiqué sur l’étiquette.
Si vous n’êtes pas sûr du type d’alimentation de votre domicile, consultez votre revendeur de télévision
ou la compagnie d’électricité locale (EDF en France).
Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode d’emploi.
11. Du point de vue de la sécurité, la télévision est équipée d’une fiche polarisée à 2 fils (une lame plus
importante que l’autre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul
sens.
Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être
obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.
12. Ne posez rien sur le cordon d’alimentation. Ne placez pas la télévision dans un emplacement où le
cordon d’alimentation est susceptible d’être endommagé par le passage répété de personnes.
32C240(42-44) 03.11.28, 1:01 PM43
42
Dimension: 140mm x 215mm
PRÉCAUTIONS IMPORTANTES (Suite)
13. Respectez tous les avertissements et instructions mentionnés sur la télévision.
14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à
la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques
accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la
terre correcte de la potence et de la structure portante, à une mise à la terre du fil d’entrée à une unité de
décharge d’antenne, aux dimensions des conducteurs de terre, à l’emplacement de l’unité de décharge
d’antenne, au raccordement des prises de terre ainsi qu’à leurs exigences.
15. Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée
pendant de longues périodes, débranchez-la et déconnectez l’antenne. Vous éviterez ainsi des dommages
à votre équipement suite à la foudre et des poussées de tension.
16. Un système d’antenne extérieure ne doit pas être situé à proximité de lignes aériennes ou d’autres
groupes électrogènes ou circuits électriques ou dans des emplacements où l’antenne pourrait tomber sur
ce type de lignes ou circuits. Lors de l’installation d’un système d’antenne extérieure, faites extrêmement
attention à ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal.
17. Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque d’incendie ou
d’électrocution.
18. N’introduisez jamais d’objets à travers les fentes du châssis, car ils pourraient entrer en contact avec des
points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une
électrocution. Ne répandez jamais de liquides sur la télévision.
19. N’essayez pas de réparer vous-même votre télévision. L’ouverture ou le retrait des capots peut vous
exposer à une tension dangereuse ou à d’autres risques. Confiez toutes les opérations de maintenance
à un personnel qualifié.
20. Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les
opérations de maintenance à un personnel qualifié :
A. lorsque le cordon d’alimentation ou la fiche est endommagé ou effiloché ;
B. si du liquide a été répandu sur/dans la télévision ;
C. si la télévision a été exposée à la pluie ou à l’eau ;
D. si la télévision ne fonctionne pas normalement même en respectant le mode d’emploi. Réglez
uniquement les commandes abordées par le mode d’emploi. Des réglages inappropriés d’autres
commandes peuvent occasionner des dommages et nécessiteront ensuite, dans la plupart des cas,
une intervention plus importante d’un technicien qualifié pour que la télévision fonctionne
normalement ;
E. si la télévision a été renversée ou que le châssis est endommagé ;
F. lorsque la télévision présente une altération visible des performances — cela indique un besoin de
maintenance.
21. Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles
de sécurité classiques afin de déterminer si la télévision est en bon état de marche.
22. Lorsqu’un remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des pièces
de rechange spécifiées par le fabricant et qu’elles aient les mêmes caractéristiques que la pièce d’origine.
Des remplacements non autorisés peuvent occasionner un incendie, une électrocution ou d’autres risques.
DESCENTE
D’ANTENNE
UNITÉ DE DÉCHARGE
D’ANTENNE
(NEC SECTION 810-20)
CONDUCTEURS DE TERRE
(NEC SECTION 810-21)
COLLIERS DE MISE À LA TERRE
ÉLECTRODE DE TERRE DE
LA COMPAGNIE D’ÉLECTRICITÉ
(NEC ART. 250, PARTIE H)
BOÎTIER DE
LA COMPAGNIE
D’ÉLECTRICITÉ
NEC CODE NATIONAL DE L’ÉLECTRICITÉ
COLLIER DE MISE
À LA TERRE
EXEMPLE DE MISE
À
LA TERRE D’UNE ANTENNE
SELON LE CODE NATIONAL DE L’ÉLECTRICITÉ
32C240(42-44) 03.11.28, 1:01 PM44
43
Dimension: 140mm x 215mm
Nomenclature (FRANÇAIS)
Panneau Avant
Référence rapide sur les commandes
IN 2
TV
Fonctions de base de la télécommande
ALIMENTATION (POWER)
Appuyer Pour mettre sous tension.
Appuyer de nouveau Pour mettre
hors tension.
RETOUR (FLASHBACK)
Rappelle le canal regardé précédent.
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOLUME UP/
DOWN)
(k) Pour augmenter le volume du son.
(l) Pour diminuer le volume du son.
Modifie ou sélectionne les
réglages TV sur l’affichage sur
écran.
RÉGLAGE (MENU)
Appuyer Accès au MENU PRINCIPAL.
Appuyer de nouveau Sortie du MENU
PRINCIPAL.
Fenêtre d’émission du signal infrarouge
AFFICHAGE (DISPLAY)
Appuyer Pour afficher le canal reçu
pendant quatre secondes.
Appuyer de nouveau Pour faire
disparaître le canal.
Pour afficher temporairement le canal
reçu en mode Sous-titres.
ENTRÉE (INPUT)
Appuyer Pour sélectionner le mode
ENTRÉE 1 vidéo externe.
Appuyer 2 fois Pour sélectionner le mode
ENTRÉE 2 vidéo externe.
Appuyer 3 fois Pour revenir au mode TV
ENTRÉE 3 vidéo externe ou le mode COM-
initial (Voir page 34).
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CHANNEL UP/DOWN)
(a) Sélectionne le canal supérieur suivant.
(s) Sélectionne le canal inférieur précédent.
Voir pages 2729 pour prérégler les
canaux.
Déplace le curseur “ E sur l’écran du
MENU.
SOURDINE (MUTE)
Appuyer Mise en sourdine du son.
Appuyer de nouveau Rétablissement du
son.
Lorsque le son est coupé, SOUS-TITRE
apparaît si la fonction est disponible.
Canal HAUT/BAS
(a) Sélectionne le canal supérieur
suivant.
(s) Sélectionne le canal inférieur
précédent.
PRISÉS DENTRÉE VIDÉO/
AUDIO
RÈGLAGE (MENU)
Appuyer Pour mettre sous
tension.
Appuyer de nouveau Pour mettre
hors tension.
CAPTEUR DE
TÉLÉCOMMANDE
ALIMENTATION (POWER)
Appuyer Pour mettre sous
tension.
Appuyer de nouveau Pour
mettre hors tension.
AUGMENTATION/RÉDUCTION
DU VOLUME SONORE (VOL)
(k) Pour augmenter le volume du son.
(l) Pour diminuer le volume du son.
PAVE NUMERIQUE DE COMMANDE
A DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu
sur le pavé numérique.
Remarque:
Les illustrations du téléviseur et de la télécommande ainsi que les affichages à l’écran dans ce mode d’emploi
diffèrent de la réalité.
32C240(45) 03.11.28, 1:02 PM45
46
Dimension: 140mm x 215mm
Avant d’appeler un réparateur
Vérifier les points suivants afin de déterminer s’il est possible de remédier au problème par un simple réglage des commandes.
(Image sombre et vide)
Remarque:
En mode TEXTE, s’il n’y a pas d’émission TEXTE à recevoir, l’écran
du téléviseur pourrait être sombre et vide. Dans ce cas, placer le
mode Sous-titrage hors service.
Pour connaître l’emplacement du centre de service après-vente agréé Sharp le plus proche ou pour
obtenir de la documentation sur les produits, des accessoires, des consommables ou une aide au
consommateur, appelez le 1-800-BE-SHARP.
Appel au service après-vente
LISTE DES
VÉRIFICATIONS
POUR UN
DÉPANNAGE
RAPIDE
SOLUTION POSSIBLE
Essayer un nouveau canal. S’il fonctionne, il s’agit
probablement d’une panne de la chaîne.
Le téléviseur est-il branché?
La prise secteur fonctionne-t-elle?
L’interrupteur POWER du téléviseur est-il sous
tension?
L’antenne est-elle raccordée aux bornes à l’arrière
de l’appareil?
Si l’antenne extérieure est utilisée, s’assurer qu’il
n’y a pas de fils sectionnés.
Vérifier s’il n’y a pas d’interférence locale ou de bruit
électrique extérieur.
Mettre l’interrupteur POWER hors tension puis de
nouveau sous tension au bout d’une minute.
Régler la commande de COULEUR.
Régler la commande de CONTRASTE.
Vérifier l’appareil vidéo/audio externe : s’assurer
que les câbles de connexion ne sont pas desserrés
ou cassés.
Vérifier les piles de la télécommande.
Mettre le mode sous-titrage hors service “ARRÊT”
Mode d’économie d’énergie sur “ARRÊT”.
Débrancher le téléviseur et le rebrancher après deux
minutes.
XXXXXXX X XXXXXXX X
X XXXXXX X XXXXXXX XX X
X X XXXXX X X XXXXXX XX X
XXXXXXXXXX X X X X X XX X
XXXXXXX X XXXXXX X XX X
XXXXXXX XXXXX XXXX X X
X X XXXXX X X XXXXXX XX X
XXXXXXX X XXXXXXXX X X
XXXXXXXXX XXXX XXX X X
XXXXXXX X X XXXXXXXX X
XXX XXXX X XXXXXXXX X X
X XXXXX X XXXXXXXX XX
XXX XXXX X X XXXXXXX X X
PROBLÉME
Pas de reproduction d’un magné-
toscope ou lecteur de disque
Pas d’image ou de son d’un appareil
vidéo/audio externe
La télécommande ne fonctionne pas
Barres sur l’écran
Distorsion de l’image
L’image défile verticalement
Pas de couleur
Faible réception de certains canaux
Image affaiblie
Lignes ou rayures dans l’image
Images fantômes
Image brouillée
Son normal, image médiocre
Image normale, son médiocre
Ni son, ni image
Image sombre et vide
Bruit électrique extérieur interférant
avec le fonctionnement du téléviseur
La couleur sur une partie de l’écran
semble altérée
32C240(46) 03.11.28, 1:02 PM46
Dimension: 140mm x 215mm
47
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com
Limited Warranty
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp
brand product (the “Product”), when shipped in its original container, will be free from defective
workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the
defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser
for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded
item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which
has been subjected to improper voltage or other misuse, abnormal service or handling, or which has
been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth
below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE
OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties
other than those described herein, or to extend the duration of any warranties beyond the time period
described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall
be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and
for the period of time described herein, shall constitute complete fulfillment of all liabilities and
responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction
of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp
be liable or in any way responsible, for any damages or defects in the Product which were caused by
repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be
liable or in any way responsible for any incidental or consequential economic or property damage.
Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion
may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description: 27C240, 27 inch Color Television (Be sure to have
this information available when you need service for
your Product.)
Warranty Period for this Product: One (1) year parts and labor. The warranty period
continues for an additional one (1) year, for a total
of two (2) years, with respect to the picture tube(s)
in the Product for parts only. Labor and service are
not provided free of charge for this additional period.
Additional Item(s) Excluded from Non-rechargeable batteries.
Warranty Coverage (if any):
Where to Obtain Service: From a Sharp Authorized Servicer located in the
United States. To find the location of the nearest
Sharp Authorized Servicer, call Sharp toll free at 1-
800-BE-SHARP.
What to Do to Obtain Service: Contact your Sharp Authorized Servicer to obtain
in-home service for this Product. The Servicer will
come to your home and if it is necessary to remove
the Product, the Servicer will reinstall it. Be sure to
have Proof of Purchase available.
32C240(47-48) 03.11.28, 1:02 PM47

Transcripción de documentos

COLOR TELEVISION MODEL 27C240 H OPERATION MANUAL H CONTENTS PAGE • IMPORTANT INFORMATION/IMPORTANT SAFEGUARDS .................................................... 2–4 • Supplied Accessories ............................................... 5 • Before Operating Your Television .............................. 5 • Antenna Connections ........................................... 5, 6 • Quick Reference Control Operation ......................... 7 • EZ SETUP during First Use ..................................... 8 • Demo Mode .............................................................. 9 • Accessing the MAIN MENU screen without Remote Control ........................................................ 9 • Language ............................................................... 10 • Sleep Timer ............................................................ 10 • Video Adjust ........................................................... 11 • Audio Select ..................................................... 12, 13 MTS (Multichannel TV Sound) ............................ 12 PAGE • Closed Caption ....................................................... 13 • Parent Control .................................................. 14–24 V-CHIP Operation ......................................... 14–21 VIEW TIMER ................................................ 22–24 • Energy Save ........................................................... 25 • Set Up .............................................................. 26–30 EZ Setup ............................................................. 26 Channel Setting ............................................ 27–29 Blue Screen .................................................. 29, 30 • Using the Video and Audio Input Terminals ............ 31, 32 • Before Calling for Service ....................................... 33 • Calling for Service .................................................. 33 • Specifications ......................................................... 34 • Limited Warranty .................................................... 47 This operation manual includes basic operating instructions in Spanish and French. SPANISH is on page 35–39. FRENCH is on page 40–44. B161 N1 1 32C240(01-04) 1 03.11.28, 1:24 PM Dimension: 140mm x 215mm Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television – built for outstanding quality, reliability and performance. Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL so that you may adjust the picture and color to your personal viewing preference. We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color Television set for years to come. Please read these instructions carefully, and keep them handy for your future reference. IMPORTANT To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: IMPORTANT INFORMATION There are two important reasons for prompt warranty registration of your new SHARP television set. Use the REGISTRATION CARD packed in with the set. FIRST – WARRANTY This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor warranty applicable to your purchase. SECOND – CONSUMER PRODUCT SAFETY ACT To assure that you will promptly receive any safety notification on inspection, modification or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE. REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT WARNING: TO EXPOSE THIS APPLIANCE TO WET LOCATIONS. The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. “Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.” WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. PRODUCT DISPOSAL This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder. Disposal of these materials may be regulated due to environment considerations. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance: www.eiae.org 2 32C240(01-04) 2 03.11.28, 1:24 PM Dimension: 140mm x 215mm IMPORTANT INFORMATION (Continued) CAUTION: • Do not place the AC power cord under the TV set or other heavy items. • To prevent fire, never place any type of candle or naked flames on the top or near the TV set. • To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product. IMPORTANT SAFEGUARDS CAUTION: Please read all of these instructions before you operate your television and save these instructions for later use. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic rules for its installation, use and servicing. 1. Unplug this television equipment from the wall outlet before cleaning. 2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Do not use attachments not recommended by the television equipment manufacturer as they may cause hazards. 4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool, etc. 5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand recommended by the manufacturer or sold with the television equipment. 6. Television equipment and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn. 7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer. 8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable operation of the television equipment and to protect it from overheating, these openings must not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a bookcase unless proper ventilation is provided. 9. The openings should never be covered with a cloth or other material, and the bottom openings should not be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television equipment should never be placed near or over a radiator or heat register. 10. This television equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your television dealer or local power company. For television equipment designed to operate from battery power, refer to the operating instructions. 11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger than the other). The 2-wire polarized plug will fit only one way into the power outlet. If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat this safety feature. 12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will be abused by persons walking on it. 3 32C240(01-04) 3 03.11.28, 1:24 PM Dimension: 140mm x 215mm IMPORTANT SAFEGUARDS (Continued) 13. Follow all warnings and instructions marked on the television equipment. 14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ELECTRIC SERVICE EQUIPMENT NEC—NATIONAL ELECTRICAL CODE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) 15. For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges. 16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 18. Never push objects of any kind into this television equipment through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television equipment. 19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the television equipment. C. If the television equipment has been exposed to rain or water. D. If the television equipment does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the television equipment to normal operation. E. If the television equipment has been dropped or the cabinet has been damaged. F. When the television equipment exhibits a distinct change in performance — this indicates a need for service. 21. Upon completion of any service or repairs to this television equipment, ask the service technician to perform routine safety checks to determine that the television is in safe operating condition. 22. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 4 32C240(01-04) 4 03.11.28, 1:24 PM Dimension: 140mm x 215mm TV Supplied Accessories Size AA Dry Batteries Infrared Remote Control RRMCG1324CESC Before Operating Your Television Location • For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided. Do not place the back of the television set in a place where free airflow will be restricted. • Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using magnets or any other magnetic substance, such as iron are kept well away from the TV set. Power Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an electrician. Do not defeat the safety feature of the polarized plug. Note: • If the set is not going to be used for a long period, such as during a vacation, unplug the set from the wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the POWER BUTTON in the OFF position.) • Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the radio. • If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received due to interference from the TV. • Before using the television, prepare the Remote Control To use the remote control, insert batteries first. Inserting the batteries Pull up Battery Cover • With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two batteries (size “AA”). Be sure to match the battery m/, terminals with the m/, marks inside the compartment. Antenna Connections Antennas • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems: 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied). 2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm ADAPTOR (not supplied). F-type connector 75-ohm coaxial cable (round) 300-ohm twin-lead cable (flat) 5 32C240(05-06) 5 03.11.28, 0:37 PM Dimension: 140mm x 215mm Antenna Connections (Continued) OUTDOOR ANTENNA CONNECTION • Refer to one of the following two diagrams when connecting to an outdoor antenna. A: Using a VHF/UHF combination outdoor antenna. B: Using separate VHF and/or UHF outdoor antenna. • Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set. A. Combination VHF/UHF Antennas VHF/UHF ANTENNA B. Separate VHF/UHF Antenna VHF/UHF ANTENNA 300/75-ohm ADAPTOR (Not supplied) REAR OF TV 300-ohm twin-lead or VHF UHF ANTENNA ANTENNA 300-ohm twin-lead COMBINER 75-ohm coaxial cable 300-ohm twin-lead (not supplied) IN OUT or 75-ohm coaxial cable REAR OF TV NOTICE F-type connector should be finger-tightened only. F-type connector When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.) 75-ohm coaxial cable CABLE TV (CATV) CONNECTION • A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. Please note: RF switch equipped with position A/B (not provided) is required. “A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s channel keys. “B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/ descrambler using the converter’s channel keys. RF switch (not supplied) A OUT IN B OUT IN Two-set signal splitter (not supplied) Cable TV Line Cable TV converter/ descrambler (not supplied) Note: • Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required. 6 32C240(05-06) 6 03.11.28, 0:37 PM Dimension: 140mm x 215mm Quick Reference Control Operation • Part Names Front Panel POWER Press → On. Press again → Off. VIDEO/AUDIO IN 2 TERMINALS REMOTE CONTROL SENSOR MENU Press → Accesses MAIN MENU. Press again → Exits MAIN MENU. VOLUME UP/DOWN (k) Increases sound. (l) Decreases sound. CHANNEL UP/DOWN (a) Selects next higher channel. (s) Selects next lower channel. Basic Remote Control Functions Infrared Transmitter Window POWER Press → On. Press again → Off. INPUT Press → Switches to external video INPUT 1 mode. Press twice → Switches to external video INPUT 2 mode. Press 3 times → Switches back to the original TV mode. See page 32. REMOTE KEYPAD Accesses any channel from keypad. FLASHBACK Returns to previous channel. CHANNEL UP/DOWN (a) Selects next higher channel. (s) Selects next lower channel. • See pages 27–29 for Channel Setting. • Moves the “ E ” mark on the MENU screens. VOLUME UP/DOWN (k) Increases sound. (l) Decreases sound. • Changes or selects the TV adjustments on On-Screen Displey. MUTE Press → Mutes sound. Press again → Restores sound. • When sound is muted, CLOSED CAPTION appears if available. MENU Press → Accesses MAIN MENU. Press again → Exits MAIN MENU. TV DISPLAY Press → Displays receiving channel for 4 seconds. Press again → Removes display. • Temporarily displays receiving channel when in Closed Caption mode. Note: • The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual appearance. 7 32C240(07) 7 03.11.28, 0:41 PM Dimension: 140mm x 215mm EZ SETUP during First Use • 1 When you turn on the TV for the first time, it will automatically memorize the broadcasting channels. Please perform the following instructions before pressing the POWER button. (1) Insert the batteries into the remote control. (See page 5) (2) Connect the antenna cable to the TV set. (See pages 5, 6) (3) Plug in the AC POWER cord to the wall outlet. POWER VOLUME (k)/(l) CHANNEL UP (a)/ DOWN (s) Press the POWER button on the TV set or on the Remote Control to turn on the TV. The SELECT LANGUAGE screen will be displayed. (On the Set) (On the Remote Control) POWER SE L ECT L A NGU A G E E NG L I S H E S P A ÑO L F RANCA I S S E L EC T : CH 8 / 9 SET : VO L + / – (SELECT LANGUAGE screen) 2 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or “FRANCAIS (FRENCH)”. SE L ECT L A NGU A G E E NG L I S H E S P A ÑO L F RANCA I S S E L EC T : CH 8 / 9 SET : VO L + / – 3 Press VOL k/l to access the EZ SETUP screen. CON N E C T A N T E N N A OR C A B L E . S T ART EZ SE TUP ? Y E S : VO L + NO : V O L – (EZ SETUP screen) 4 5 Press VOL k. The tuner will automatically search for the broadcasting and cable TV channels. (The CH No. will automatically increase when it appears.) If you want to stop the EZ SETUP process once it has started, press VOL l and it will be canceled. If you want to SET UP again, please refer to page 26 on SET UP. To cancel EZ SETUP Press VOL l. (START) P L E A S E WA I T AUTO (STOP) P R O G R AMM I N G 18 S T OP : VO L – Once EZ SETUP is complete, the lowest channel number memorized will be displayed. 2 Note: • If EZ SETUP does not memorize all the channels in your region, please refer to pages 27–29 for more information on manually memorizing the channels using CHANNEL SETTING. • It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is incorrect or frequency jamming is occurring around the area. Please refer to pages 27–29 for more information on manually memorizing the channels using CHANNEL SETTING. 8 32C240(08-09) 8 03.11.28, 0:42 PM Dimension: 140mm x 215mm Demo Mode • To learn more about the TV set, you can enter DEMO mode. Simply press and hold MENU on the TV set for more than 3 seconds. • To cancel DEMO mode, again press MENU on the TV set for more than 3 seconds. (On the Set) Example: DEMO mode display MENU button Accessing the MAIN MENU screen without Remote Control • If you misplaced your Remote Control you can still access most settings via the MAIN MENU screen by pressing MENU on the TV set. • Some features of your TV set are not accessible without the Remote Control. If you lost your Remote Control, contact a Sharp Service Center for a replacement. (On the Set) MENU button 9 32C240(08-09) 9 03.11.28, 0:42 PM Dimension: 140mm x 215mm Language • The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH. 1 Press MENU to access the MAIN MENU screen. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP (MAIN MENU screen) 2 Press CH a/s to move the “ 3 Press VOL k/l to access the SET UP screen, then press CH a/s to move the “ ” mark to “LANGUAGE”. ” mark to “SET UP”. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP B L UE SCRE EN L A NGU A G E C H S E T T I NG → (SET UP screen) 4 Press VOL k/l to access the LANGUAGE select screen. L A NGU A G E E NG L I S H E S P A ÑO L F RANCA I S (LANGUAGE select screen) 5 6 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or “FRANCAIS (FRENCH)”. I D I OMA E NG L I S H E S P A ÑO L F RANCA I S Press MENU to exit. Sleep Timer • You can preset your television to turn off automatically in increments of 30, 60, 90, or 120 minutes. 1 2 Press MENU to access the MAIN MENU screen. Press VOL k/l to access the SLEEP TIMER screen. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP → 3 4 Press VOL k/l to set a sleep time of 30, 60, 90 or 120 minutes. Press MENU to exit. S L EEP T I ME R 1 2 0 R EMA I N → Note: (SLEEP TIMER screen) • To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN” during step 3. • While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular intervals or when the Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER turns off the TV, the screen prompts the time remaining for 4 seconds. The SLEEP TIMER shows a similar display for each remaining minute and a 10-second display right before shutting off the TV. • If you turn the POWER OFF, the SLEEP TIMER will automatically reset. 10 32C240(10-11) 10 03.11.28, 0:42 PM Dimension: 140 X 215 mm Video Adjust • Description of Adjustment Items Selected item VOL k button VOL l button PICTURE To increase contrast To decrease contrast TINT To make skin tones greenish To make skin tones purplish COLOR To increase color intensity To decrease color intensity BRIGHT To increase brightness To decrease brightness SHARP To increase sharpness To decrease sharpness COLOR TEMP. To choose a RED, BLUE or STANDARD COLOR TONE. RESET To return all adjustments to factory preset levels. 1 2 Press MENU to access the MAIN MENU screen. Press CH a/s to move the “ ” mark to “VIDEO ADJUST”. → VOLUME (k)/(l) CHANNEL UP (a)/ DOWN (s) MENU S L E E P T I ME R V I D EO A D J U S T A UD I O S E L E C T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP (MAIN MENU screen) 3 Press VOL k/l to access the PICTURE adjust screen. P I C T URE 50 – + (PICTURE adjust screen) 4 Press CH a/s to select the desired adjustment item. (Refer to the diagram below.) PICTURE RESET : CH a 5 TINT COLOR COLOR TEMP. BRIGHT SHARP : CH s Press VOL k/l to adjust the setting. P I C T URE 27 – + VOL k increases contrast VOL l decreases contrast 6 Repeat steps 4 to 5 to adjust other settings. 7 Press MENU to exit. Note: • VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1 and INPUT 2 modes. 11 27C240 11 Dimension: 140 X 215 mm Audio Select H MTS (Multichannel TV Sound) This function allows reception of stereo or bilingual TV sound. You can enjoy Hi-Fi stereo sound or SAP broadcasts where available. Stereo broadcasts Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo sound. SAP broadcasts Television broadcast can be received with either MAIN or SAP sound. MAIN sound: The normal program soundtrack. (Monaural or stereo where available.) SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.) If stereo sound is difficult to hear. You can obtain clearer sound by manually switching to fixed monaural mode. • • 1 2 Press MENU to access the MAIN MENU screen. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP Press CH a/s to move the “ ” mark to “AUDIO SELECT”. → (MAIN MENU screen) 3 Press VOL k/l to access the AUDIO SELECT screen. AUD I O S E L EC T MT S : SAP → (AUDIO SELECT screen) 4 Press VOL k/l to select “STEREO”, “SAP” or “MONO” when the “ ” mark is at “MTS” position. AUD I O S E L EC T MT S MTS STEREO : S T E R EO SAP (AUDIO SELECT screen) MONO 5 Press MENU to exit. An example screen displaying ON AIR when receiving STEREO broadcasts 12 Current channel number “← ON AIR” will appear next to STEREO or SAP when receiving STEREO or SAP broadcasts. STEREO SAP MONO ON A I R ON A I R (CHANNEL call on screen) Note: • Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again. • Selecting MTS while receiving video signals from INPUT terminals does not change the type of sound; in this case, sound is determined by the video source. 12 32C240(12-13) 12 03.11.28, 0:43 PM Dimension: 140 X 215 mm Closed Caption • 1 2 How to set CLOSED CAPTION • Your TV is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs and home videos to appear as captions on the TV screen (see the illustration). • Not all the programs and videos will offer closed captioning. Please look for the “ ” symbol to ensure that captions will be shown. • Closed Caption broadcast can be viewed in two modes: CAPTION and TEXT. For each mode, two channels are available, CH1 and CH2. The CAPTION mode shows subscripts of dialogs and commentaries of TV dramas and news programs while allowing clear view of the picture. The TEXT mode displays over the picture other various information (such as TV program schedule, weather forecast, etc.) that is independent of the TV programs. Press MENU to access the MAIN MENU screen. Press CH a/s to move the “ ” mark to “CLOSED CAPTION”. VOLUME (k)/(l) CHANNEL UP (a)/ DOWN (s) MENU S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP → (MAIN MENU screen) 3 Press VOL k/l to access the CLOSED CAPTION setting screen. C L O S E D C A P T I ON MOD E DA T A : C A P T I ON : CH 1 (CLOSED CAPTION setting screen) 4 Press CH a/s to move the “ ” mark to either “MODE” or “DATA”. C L O S E D C A P T I ON MOD E DA T A 5 : C A P T I ON : CH 1 Press VOL k/l to change the CLOSED CAPTION setting. MODE : CAPTION DATA : CH 1 CH 2 TEXT C L O S E D C A P T I ON MOD E DA T A : C A P T I ON : CH 1 OFF 6 Press MENU to exit. Note: • If a broadcast contains CLOSED CAPTION and the MUTE button is pressed, the set enters CAPTION mode automatically. Pressing MUTE again will return the set to its previous condition. • Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with your TV. • If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the closed captions will disappear momentarily. • If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become dark and blank for some programs. Should this occur, switch the Closed Caption mode to “OFF”. 13 32C240(14-16) 14 03.11.28, 0:47 PM Dimension: 140 X 215 mm Parent Control (V-CHIP Operation) H V-CHIP • This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your children from watching violence or sexual scenes that may be harmful. • Restriction of TV programs includes two characters that contain information about the program’s MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted by age and contents. • Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for complete control. [1] MPAA RATING RATING G PG age based PG-13 R NC-17 X GENERAL AUDIENCES. All ages admitted. PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13. RESTRICTED. Under 17 requires accompanying parent or adult guardian. NO ONE 17 AND UNDER ADMITTED. X Rating is an older rating that is unified with NC-17 but may be encoded on older movie’s data.Note: • MPAA RATING Example 1: “PG-13” in the age-based rating is blocked, this will automatically block the higher ratings “R”, “NC-17”, “X” also. Example 2: “R” in the age-based rating is blocked, this will automatically block the higher rating “NC-17”, “X” also. 1. User setting 1. User setting 2. Block table G ––––– G PG ––––– PG PG-13 BLOCK R BLOCK age PG-13 based R NC-17 BLOCK NC-17 X BLOCK X not to block not to block Select block autoblock autoblock autoblock 2. Block table G ––––– G PG ––––– PG PG-13 ––––– R BLOCK age PG-13 based R NC-17 BLOCK NC-17 X BLOCK X not to block not to block not to block Select block autoblock autoblock Note: • MPAA RATING is only age-based. [2] TV PARENTAL GUIDELINES content based AGE RATING D L S V FV (Sexually (Adult (Sexual (Violence) (Fantasy Suggestive Language) Situation) Violence) Dialog) TV-Y (All children) TV-Y7 (Direct to Older Children) V – – – – – – – – – V TV-G (General Audience) V – – – – – V V V V V – TV-14 (Parents Strongly Cautioned) V V V V V – TV-MA (Mature Audience Only) V – V V V – age TV-PG (Parental Guidance based Suggested) V : Content Rating can be set. l : Content Rating cannot be set (not normally broadcast by TV station). V 14 32C240(14-16) 15 03.11.28, 0:47 PM Dimension: 140 X 215 mm Parent Control (V-CHIP Operation) (Continued) • TV PARENTAL GUIDELINES (Example) TV–Y TV–Y 7 TV–G TV–PG TV– 1 4 TV–MA Example 1.1 : Age Based setting Clear V s (block) from each "AGE" box for all ratings. This will automatically unblock everything. AG E D – – – L – – – S – – – – V FV – – – – – – – – : V I EW V : B LOCK MENU : RETURN Example 1.2 : Age Based setting For “TV-G” put a V in the "AGE" box. This will automatically block the higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”. Please note the content ratings “D”, “L”, “S”, “V” are automatically blocked as well. Example 2.1 : Content Based setting If you choose to unblock every content-based items (“D”, “L”, “S”, “V”), clear the V (block) from each “AGE” box of “TV-PG”, “TV-14” and “TVMA”. TV–Y TV–Y 7 TV–G TV–PG TV– 1 4 TV–MA AG E D – – V – V V V V V – L – – – V V V S – – – V V V V – – – V V V FV – : V I EW V : B LOCK – – – – MENU : RETURN TV–Y TV–Y 7 TV–G TV–PG TV– 1 4 TV–MA AG E D – – – L – – – S – – – – V FV – – – – – – – – : V I EW V : B LOCK MENU : RETURN Example 2.2 : Content Based setting Put a V in the box corresponding to “TV-PG” (row) and “V (Violence)” (column). This will automatically block the “V” boxes for “TV-14” and “TV-MA”. Setting only “TV-PG-V”, “TV-14-V” or “TV-MA-V” will not block all programs rated “TV-PG”, “TV-14” or “TV-MA”. Example 3 : Resetting an Age Based setting For “TV-14”, put a V (block) in the “AGE” box. This will again automatically block the content ratings “D”, “L”, “S”, “V” for “TV-MA” as well as “TV-14” (“D” is not available for “TV-MA”). Please note that the lower age rating “TV-PG” does not change from its previous settings after this. TV–Y TV–Y 7 TV–G TV–PG TV– 1 4 TV–MA AG E D – – – L – – – S – – – – V – – – V V V FV – – – – – : V I EW V : B LOCK MENU : RETURN TV–Y TV–Y 7 TV–G TV–PG TV– 1 4 TV–MA AG E D – – – V V L – – – S – – – V FV – – – – – – V V V V – – V V V – : V I EW V : B LOCK MENU : RETURN Note: • Content ratings can be modified but only in the combinations indicated by V in the table on page 14. • Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age rating’s content setting to “BLOCK” regardless of their previous settings. • Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK” regardless of their previous settings. • For “TV-Y7”, “TV-PG”, “TV-14” and “TV-MA”, if you clear the V in the “AGE” box (unblock) you can still change settings based on content. • Clearing a higher rating’s age or content setting will not clear lower settings. Make sure that all undesired boxes are blocked. [3] ADDITIONAL MODE Besides “MPAA RATINGS” and “TV PARENTAL GUIDELINES”, new ratings system’s data can be downloaded when they become available. (See page 19.) 15 32C240(14-16) 16 03.11.28, 0:48 PM Dimension: 140 X 215 mm Parent Control (V-CHIP Operation) (Continued) • How to set V-CHIP VOLUME (k)/(l) [1] MPAA RATING CHANNEL UP (a)/ DOWN (b) MENU 1 Press MENU to access the MAIN MENU screen. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP (MAIN MENU screen) 2 Press CH a/s to move the “ 3 Press VOL k/l to access the PARENT CONTROL screen. ” mark to “PARENT CONTROL”. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP PARENT CON T RO L V – C H I P B L OC K V I E W T I ME R (PARENT CONTROL screen) 4 Press VOL k/l to access the V-CHIP select screen. MPAA TV GU I DEL I NES Note: • If SECRET No. is already set, enter the SECRET No. (See To change the V-CHIP BLOCK after registering a secret No. on page 22.). • DOWNLOAD : OFF STATUS : OFF (V-CHIP select screen) 5 Press VOL k/l to select “MPAA”. Press CH a/s to move the “ ” mark to “PG”, then press VOL k/l to select BLOCK. If you set “PG” to BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked. → 6 → G PG PG– 1 3 R NC– 1 7 X : : B LOCK : B LOCK : B LOCK : B LOCK : B LOCK MENU : RETURN Press MENU to return to the V-CHIP select screen. 16 32C240(17-18) 17 03.11.28, 0:48 PM Dimension: 140 X 215 mm Parent Control (V-CHIP Operation) (Continued) 7 Press MENU, then “INPUT SECRET No.” will be displayed. I NPUT SECRET No . Note: – – – – • If SECRET No. is already set, skip to step 9. 8 Enter a 4-digit SECRET No. using the REMOTE KEYPAD. 1 2 3 4 5 6 7 8 9 I NPUT SECRET No . 1 2 3 4 ENTER 0 9 100 When done, press MENU to exit. Note: • If you set “G” to BLOCK , all ratings are automatically blocked. • If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked. [2] TV GUIDELINES 1 2 MPAA TV GU I DEL I NES Repeat steps 1 to 4 of [1] MPAA RATING. Press CH a/s to move the “ ” mark to “TV GUIDELINES”. DOWNLOAD : OFF STATUS : OFF (V-CHIP select screen) AGE D L S V FV – – – – V – – – – V – – – – V VVVV V VVVV V – VVV TV–Y TV–Y7 TV–G TV–PG TV– 1 4 TV–MA – V – – – – : V I EW V: B LOCK MENU : RETURN (TV GUIDELINES screen) → 5 Press CH a/s to move the “ ” mark to the desired content item and then press VOL k/l to select either “BLOCK” or “– – – – –” (unblock). → TV–Y7 AGE : : D L : S : V : FV : BLOCK ––––– ––––– ––––– ––––– BLOCK MENU : RETURN (CONTENT RATING screen) 6 7 8 9 Press MENU to return to the TV GUIDELINES screen. Repeat steps 4 to 6 until all ratings and their contents are set. When done, press MENU to return to V-CHIP selct screen. Press MENU to exit. AGE D L S V FV TV–Y TV–Y7 TV–G TV–PG TV– 1 4 TV–MA – – – – – – – – V – – – – V VVVV V VVVV V – VVV – : V I EW V: B LOCK – – – – MENU : RETURN Note: • If SECRET No. is not set, enter a SECRET No. as show in steps 7 and 8 of [1] MPAA RATING. 17 32C240(17-18) 18 03.11.28, 0:49 PM Dimension: 140 X 215 mm Parent Control (V-CHIP Operation) Operation Continued) (Continued) [3] Downloading additional rating mode There will be an additional new rating system. In that case, please set up as follows. Subsequently the new rating system will set up automatically. REMOTE KEYPAD VOLUME (k)/(l) CHANNEL UP (a)/ DOWN (s) MENU 1 2 Repeat steps 1 to 4 of [1] MPAA RATING. Press CH a/s to move the “ ” mark to “DOWNLOAD”. MPAA TV GU I DEL I NES DOWNLOAD : OFF STATUS : OFF 3 Press VOL k/l to select “DOWNLOAD : ON”. MPAA TV GU I DEL I NES DOWNLOAD : ON STATUS : OFF 4 Press MENU, then “INPUT SECRET No.” will be displayed. I NPUT SECRET No . Note: – – – – • If SECRET No. is already set, skip to step 6. 5 Enter a 4-digit secret No. using the REMOTE KEYPAD. I NPUT SECRET No . 1 2 3 4 5 6 7 8 1 2 3 4 9 ENTER 0 6 100 Press MENU to exit. • Downloading V-CHIP data 1 If you watch a program containing “new rating system data”, the DOWNLOAD screen will be displayed. PL EA SE WA I T NOW DOWNLOADI NG V–CH I P DATA (DOWNLOAD screen) 2 The DOWNLOAD screen will disappear, once downloading is finished. Note: • DOWNLOAD will not start, if you are not watching a program containing “new rating system data”. 18 32C240(19-22) 19 03.11.28, 0:50 PM Dimension: 140 X 215 mm Parent Control (V-CHIP Operation) (Continued) • How to set additional rating mode (Example) Once downloading is complete, you can set the blocking pattern as follows. 1 2 Repeat steps 1 to 4 of [1] MPAA RATING. Press CH a/s to move the “ then press VOL k/l. ” mark to “Cdn. English Ratings”, → MPAA TV GU I DE L I NES Cd n . E n g l i s h R a t i n g s Cd n . F r e n c h Ra t i n g s DOWNLOAD : ON STATUS : ON (After downloading the rating data) 3 You can select “BLOCK” or “– – – – –” (unblock) for each rating item by pressing CH a/s and VOL k/l. → C C8+ G PG 1 4+ 1 8+ : : B LOCK : : B LOCK : : B LOCK I ND I V I DUAL BLOCK MENU : RETURN (ENGLISH INDIVIDUAL BLOCK screen) 4 You can select “BLOCK” or “– – – – –” (unblock) for each rating item by pressing CH a/s and VOL k/l if you select “Cdn. French Ratings” in step 2. → G 8+ 1 3+ 1 6+ 1 8+ : : B LOCK : : B LOCK : I ND I V I DUAL BLOCK MENU : RETURN (FRENCH INDIVIDUAL BLOCK screen) Note: • You are able to download up to 4 different rating systems. 19 32C240(19-22) 20 03.11.28, 0:50 PM Dimension: 140 X 215 mm Parent Control (V-CHIP Operation) (Continued) • Activating the V-CHIP BLOCK 1 2 Repeat steps 1 to 4 of [1] MPAA RATING. Press CH a/ s to move the “ ” mark to “STATUS”. Press VOL k/l to activate the V-CHIP BLOCK. (If STATUS is OFF, VCHIP BLOCK will not operate.) MPAA TV GU I DE L I NES DOWNLOAD : OFF STATUS : ON → (V-CHIP select screen) 3 Press MENU, then “INPUT SECRET No.” will be displayed. I NPUT Note: – S E CRE T – – No . – • If SECRET No. is already set, skip to step 5. 4 Enter a 4-digit secret No. using the REMOTE KEYPAD. 1 2 4 5 7 8 I NPUT 3 6 1 S E CRE T 2 3 No . 4 9 ENTER 0 5 100 Press MENU and the secret No. will be registered. • To temporarily cancel the V-CHIP BLOCK 1 “V-CHIP HAS BEEN ACTIVATED” appears if you view a program with the same program rating data you configured. 23 V – CH I P HA S B E EN ACT I VA T ED TV–Y7 FV Note: • “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”. 2 Press MENU, then “INPUT SECRET No.” will be displayed. I NPUT – 3 Enter the 4-digit secret No. using the REMOTE KEYPAD, then VCHIP BLOCK will be canceled temporarily. If the wrong secret No. is chosen, “SECRET No. IS INCORRECT” will be displayed. Input the secret No. again in this case. 1 2 4 5 7 8 3 I NPUT S E CRE T – – No . – S E CRE T No . ∗ ∗ ∗ ∗ 6 9 ENTER 0 Note: 100 • If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again. 20 32C240(19-22) 21 03.11.28, 0:50 PM Dimension: 140 X 215 mm Parent Control (V-CHIP Operation) (Continued) • To change the V-CHIP BLOCK after registering a secret No. 1 Repeat steps 1 to 4 of [1] MPAA RATING, then “INPUT SECRET No.” will be displayed. I NPUT – 2 Enter the 4-digit secret No. using the REMOTE KEYPAD and the V-CHIP select screen will be displayed. Set V-CHIP BLOCK again. 1 2 3 4 5 6 7 8 9 I NPUT S E CRE T – – No . – S E CRE T No . ∗ ∗ ∗ ∗ ENTER 0 100 • If you forget or need to change your secret No., clear the original secret No. and set up a new one. 1 Repeat steps 1 to 4 of [1] MPAA RATING, or 1 to 2 of To temporarily cancel the V-CHIP BLOCK, then “INPUT SECRET No.” will be displayed. 2 Press and hold both VOL k and CH s on the TV set simultaneously until the message “INPUT SECRET No.” disappears. (On the Set) VOL k and CH s buttons 3 Press the MENU button twice to exit. 21 Dimension: 140 X 215 mm Parent Control (VIEW TIMER) H VIEW TIMER This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV. VIEWING TIME (an accumulative timer: counts only the time duration while the TV power is on.) V I E W T I ME R • VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10 V I E W I N G T I ME hours) in 30 minutes intervals. – – H – –M O F F T I ME OFF TIME (Restricts TV viewing after the VIEWING TIME reaches – – H – –M zero.) S T A TUS : OF F • OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours) in 30 minutes intervals. STATUS (Select ON to activate VIEW TIMER) • How to set VIEW TIMER 1 2 Press MENU to access the MAIN MENU screen. Press CH a/s to move the “ ” mark to “PARENT CONTROL”. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP → (MAIN MENU screen) 3 4 Press VOL k/l to access the PARENT CONTROL screen. Press CH a/s to move the “ ” mark to “VIEW TIMER”. PA R E N T CON T RO L V – C H I P B L OC K V I E W T I ME R → (PARENT CONTROL screen) 5 Press VOL k/l to access “VIEW TIMER”. V I EW T I ME R V I E W I N G T I ME – –H – – M O F F T I ME – –H – – M S T A TUS : OF F 6 Press CH a/s to select “VIEWING TIME” and “OFF TIME”. For each selection, press the VOL k/l to set the time duration. V I EW I NG T I ME 2 H 0 0M O F F T I ME – – H – –M S T A TUS : OF F → 7 Press CH a/s to select “STATUS”. Press the VOL k/l to turn ON the “VIEW TIMER”. (If STATUS is OFF, VIEW TIMER will not operate.) → 8 V I EW T I ME R V I EW T I ME R V I EW I NG T I ME 2 H 0 0M O F F T I ME 5 H 0 0M S T A T U S : ON Press MENU. “INPUT SECRET No.” will be displayed. I NPUT Note: • If SECRET No. is already set, skip to step 10. – S E CR E T – – No . – 22 32C240(23-26) 23 03.11.28, 0:57 PM Dimension: 140 X 215 mm Parent Control (VIEW TIMER) (Continued) 9 Enter the 4-digit secret No. using the REMOTE KEYPAD. 10 Press MENU, and secret No. is registered. 1 2 3 4 7 5 8 9 ENTER 0 I NPUT 6 100 1 • To change the VIEW TIMER setting after registering a secret No. 1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press VOL k/l, and “INPUT SECRET No.” will be displayed. Enter the 4-digit secret No. using the REMOTE KEYPAD, and the VIEW TIMER access screen will be displayed. Repeat steps 5, 6. 2 3 No . 4 → Example: • To restrict anybody from watching TV for more than 5 hours, after watching the TV for 2 hours, your settings would look like the one on the right. • You can choose to watch the 2 hours of TV as you wish. For example, you could watch 1 hour of TV, turn the TV off for 30 minutes, then turn the TV on and watch the remaining 1 hour of the VIEWING TIME. 2 S E CR E T V I EW T I ME R V I EW I NG T I ME 2H 0 0M T I ME 5H 0 0M S T A T U S : ON OFF I NPUT – 1 2 3 4 5 6 7 8 I NPUT S E CR E T – – No . – S ECR E T No . ∗ ∗ ∗ ∗ 9 ENTER 0 100 Note: • When you choose the correct secret No., the VIEW TIMER access screen is displayed. If the wrong secret No. is chosen, “SECRET No. IS INCORRECT” is displayed. Input the secret No. again in this case. • To cancel the VIEW TIMER (While the TV set is OFF but the VIEW TIMER is set.) 1 Turn on the TV; a blue screen message “TIME OVER” will appear. If you do nothing, the TV will turn off in approximately 30 seconds. 2 Enter the 4-digit secret No. using the REMOTE KEYPAD. When you choose the correct secret No., the VIEW TIMER is canceled. If the wrong secret No. is chosen, “SECRET No. IS INCORRECT” is displayed. Input the secret No. again in this case. 1 2 3 4 5 6 7 8 S E CR E T N o . I NC O RR EC T T I ME O V E R I NPUT – S ECR E T – – No . – T I ME O V E R I NPUT 9 S E CR E T No . ∗ ∗ ∗ ∗ ENTER 0 IS 100 23 32C240(23-26) 24 03.11.28, 0:57 PM Dimension: 140 X 215 mm Parent Control (VIEW TIMER) (Continued) • To cancel the VIEW TIMER setting or change the secret No. (If you forget the SECRET No.) 1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press VOL k/l, and “INPUT SECRET No.” will be displayed. 2 Press and hold both VOL k and CH s on the TV set simultaneously until the VIEW TIMER access screen is displayed. Now you can cancel the VIEW TIMER settings or change the secret No. while “INPUT SECRET No.” is displayed. I NPUT – S E CR E T – – No . – (On the Set) VOL k and CH s buttons • Notice of Remaining VIEWING TIME • For every 30 minute interval, the remaining time will be displayed for 4 seconds. For the last 5 minutes, the remaining time will be displayed every minute. • “0 REMAIN” will be displayed for 10 seconds just before the VIEWING TIME expires. VIEWING TIME 0H 30M REMAIN VIEWING TIME 0H 05M REMAIN VIEWING TIME 0 REMAIN 24 27C240 24 Dimension: 140 X 215 mm Energy Save • 1 2 This feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on the environment. When this feature is turned on, it reduces the brightness of the TV to a level that consumes approximately 20 percent less energy than when the feature is turned off. The reduction in brightness will be less noticeable under low room lighting conditions. Press MENU to access the MAIN MENU screen. Press CH a/s to move the “ ” mark to “ENERGY SAVE”. → VOLUME (k)/(l) CHANNEL UP (a)/ DOWN (s) MENU S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP (MAIN MENU screen) 3 Press VOL k/l to access the ENERGY SAVE select screen. E N E RG Y S AV E : OF F (ENERGY SAVE select screen) 4 Press VOL k/l to select “ON”. E N E RG Y 5 S AV E : ON Press MENU to exit. 25 32C240(23-26) 26 03.11.28, 0:57 PM Dimension: 140 X 215 mm Set Up H EZ Setup By operating the channel preset functions, you can preset your TV to the desired channels for viewing. VOLUME (k)/(l) CHANNEL UP (a)/ DOWN (s) MENU 1 2 Press MENU to access the MAIN MENU screen. Press CH a/s to move the “ ” mark to “SET UP”. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP → (MAIN MENU screen) 3 Press VOL k/l to access the SET UP screen, then press CH a/s to move the “ ” mark to “CH SETTING”. B L UE SCRE EN L A NGU A G E C H S E T T I NG → (SET UP screen) 4 Press VOL k/l to access the CH SETTING screen. E Z SE TUP A I R / CAB L E CH S E ARCH C H MEMOR Y (CH SETTING screen) 5 Press VOL k/l to access the EZ SETUP screen. CON N E C T A N T E N N A OR C A B L E . S T ART EZ SE TUP ? Y E S : VO L + NO : V O L – (EZ SETUP screen) 6 7 Press VOL k. The tuner will automatically search for the broadcasting and cable TV channels. (The CH No. will automatically increase when it appears.) If you want to stop the EZ SETUP process once it has started, press VOL l. Search will be canceled. To cancel EZ SETUP Press VOL l. (START) P L E A S E WA I T AUTO P R O G R AMM I N G (STOP) 18 S T OP : VO L – Once EZ SETUP is complete, the lowest channel number memorized will be displayed. 2 26 32C240(27-28) 27 03.11.28, 0:56 PM Dimension: 140 X 215 mm Set Up (Continued) H Channel Setting If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 2 Press MENU to access the MAIN MENU screen. Press CH a/s to move the “ ” mark to “SET UP”. S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP → (MAIN MENU screen) 3 4 Press VOL k/l to access the SET UP screen. Press CH a/s to move the “ ” mark to “CH SETTING”. B L UE SCRE EN L A NGU A G E C H S E T T I NG → (SET UP screen) 5 Press VOL k/l to access the CH SETTING screen. E Z SE TUP A I R / CAB L E CH S E ARCH C H MEMOR Y (CH SETTING screen) 6 Press CH a/s to move the “ ” mark to “AIR/CABLE”, then press VOL k/l to access the AIR/CABLE screen. EZ SETUP A I R / CAB L E C H S E A RC H C H MEMOR Y → 7 Press CH a/s to move the “ ” mark to the desired mode. A I R / CAB L E AIR CABLE STD CABLE HRC CABLE IRC AIR CAB L E CAB L E CAB L E STD HRC I RC (AIR/CABLE screen) 8 Press MENU to exit. Note: • Receivable channels of your TV set are: AIR channels: VHF: 2 through 13. UHF: 14 through 69. CABLE channels: 1 (HRC and IRC mode only) 2 through 125 (STD, HRC and IRC) 27 32C240(27-28) 28 03.11.28, 0:56 PM Dimension: 140 X 215 mm Set Up (Continued) • Saving broadcast TV channels into memory 1 Press MENU to access the MAIN MENU screen, then press CH a/s to move the “ ” mark to “SET UP”. 2 Press VOL k/l to access the SET UP screen, then press CH a/s to move the “ ” mark to “CH SETTING”. 3 Press VOL k/l to access the CH SETTING screen. 4 Press CH a/s to move the “ ” mark to “CH SEARCH”, then press VOL k/l to access the CH SEARCH screen. → E Z SE TUP A I R / CAB L E CH S E ARCH C H MEMOR Y → (CH SETTING screen) → CH AIR To start: (CH SEARCH screen) E Z SE TUP A I R / CAB L E CH S E ARCH C H MEMOR Y (STOP) Press VOL l. CH SEARCH will stop at the current channel and will not add any higher channels. 5 12 S T ART : + S T OP : – (START) Press VOL k. The tuner will search through all available channels in your area and add them into the TV memory. To stop: S E ARCH Press MENU to exit. Note: • If you press VOL k again while in the CH SEARCH mode, autoprogram will start again, and the previously memorized channels will be lost. • 1 Adding weak or additional channels or erasing unwanted → channels from TV memory Press MENU to access the MAIN MENU screen, then press CH a/s to move the “ ” mark to “SET UP”. 2 Press VOL k/l to access the SET UP screen, then press CH a/s to move the “ ” mark to “CH SETTING”. 3 Press VOL k/l to access the CH SETTING screen. → → E Z SE TUP A I R / CAB L E CH S E ARCH C H MEMOR Y (CH SETTING screen) 4 Press CH a/s to move the “ ” mark to “CH MEMORY”, then press VOL k/l to access the CH MEMORY screen. 5 Use CH a/s or REMOTE KEYPAD to select each desired channel to add or erase. → or 1 2 4 5 7 8 3 6 9 ENTER 0 100 28 32C240(29-30) 29 03.11.28, 0:56 PM Dimension: 140 X 215 mm Set Up (Continued) 6 Press VOL k to add a channel to the TV memory or press VOL l to erase a channel from the TV memory. VOL k To add channel 12 to the TV memory CH MEMOR Y AIR 12 TO ADD VOLUME (k)/(l) C H MEMOR Y AIR : + (CH MEMORY unmemorized channel) VOL l To erase channel 12 from the TV memory TO ERASE : – CHANNEL UP (a)/ DOWN (s) (CH MEMORY memorized channel) MENU 7 Press MENU to exit. H BLUE SCREEN Automatically turns the screen blue if a broadcast signal is not received. 1 2 Press MENU to access the MAIN MENU screen. Press CH a/s to move the “ ” mark to “SET UP”. → S L E E P T I ME R V I D EO A D J U S T AUD I O S E L EC T C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E SE T UP (MAIN MENU screen) 3 Press VOL k/l to access the SET UP screen. B L UE SCRE EN L A NG U A G E C H S E T T I NG (SET UP screen) 4 Press VOL k/l to access the BLUE SCREEN select screen. B LUE S CR E E N : OF F (BLUE SCREEN select screen) 5 Press VOL k/l to select “ON”. B LUE S CR E E N : ON 29 32C240(29-30) 30 03.11.28, 0:56 PM Dimension: 140 X 215 mm Set Up (Continued) 6 Press MENU to exit. Note: • Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN “OFF”. • While INPUT 1 or 2 is selected, the BLUE SCREEN will not be shown even if the BLUE SCREEN is turned on. 30 27C240 30 Dimension: 140 X 215 mm Using the Video and Audio Input Terminals • Connecting video equipment for playback of video material. • To view video material from external video equipment, make sure to connect the equipment properly to the input terminals on the TV set. Connecting video device equipped with video output terminals CONNECTIONS VIDEO EQUIPMENT (Front connection terminals of TV) To VIDEO OUTPUT To AUDIO OUTPUT (L) To AUDIO OUTPUT (R) CAMCORDER TV GAME (Rear connection terminals of TV) To VIDEO OUTPUT VCR To AUDIO OUTPUT (L) To AUDIO OUTPUT (R) DVD Yellow : To video input terminal White : To audio input (L) terminal Red : To audio input (R) terminal 31 32C240(33-34) 33 03.11.28, 0:58 PM Dimension: 140 X 215 mm Using the Video and Audio Input Terminals (Continued) Notes: • The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals. separated into color and brightness signals. • The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio cable to the IN 1 AUDIO terminals (left and right). (Rear connection terminals of TV) To S-VIDEO OUTPUT (When your video equipment has an S-VIDEO output terminal) VIDEO EQUIPMENT To AUDIO OUTPUT (L) To AUDIO OUTPUT (R) • To watch video material playback • Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you wish to play. • The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed. AIR or CABLE INPUT 1 (IN 1) Rear INPUT 2 (IN 2) Front • INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH s when it is set to the lowest channel. Note: • When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the television or the equipment being connected. • The S-Video terminal has priority over the VIDEO terminal (IN 1). When you wish to use video equipment connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal. • It is the intent of SHARP that this product be used in full compliance with the copyright law of the United States and that prior permission be obtained from copyright owners whenever necessary. • For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used. • The connection cables/cords can be obtained from your local video store. 32 32C240(33-34) 34 03.11.28, 0:58 PM Dimension: 140 X 215 mm Before Calling for Service PROBLEM QUICK SERVICE CHECK LIST No Playback of VCR and Disc Player No Picture or Sound from External Video/Audio Products Remote Control Doesn’t Work Bars on Screen Picture Distorted Picture Rolls Vertically No Color Poor Reception on Some Channels Weak Picture Lines or Streaks in Picture Ghosts in Picture Picture Blurred Sound OK, Picture Poor Picture OK, Sound Poor No Picture or Sound Dark and Blank Picture External Electrical Noise Interfering with TV’s Operation Color on Part of the Screen Appears Distorted Check these items and see if you can correct the trouble with a slight adjustment of the controls. POSSIBLE REMEDY Try a new channel, if OK, then there is a possible station trouble. X X X X X X X Is TV plugged in? Power at outlet? X X X X X X X Is TV’s POWER button on? X X X X X X X Is antenna connected to terminal on the back of the set? X X X X X X X If outside antenna is being used, check for broken wire. X X Check for local interference or external electrical noise. X Turn off the POWER and then turn it on after about a minute. X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Adjust COLOR control. X X X X X X X X X X X X X X X X X X Adjust PICTURE control. X X X X X X X X X X X X X X X X X X Check external Video/Audio products: look for loose/broken connection leads. (Refer to pages 31, 32) X X X X X X X X X X X X X X X X X X Check batteries of Remote Control. X X X Change Closed Caption mode to “OFF”/Energy Save mode to “OFF”. X X X X X X X X X X X X X X X X X X Unplug the TV and plug it in again after 2 minutes or longer. X X X X X X X X X X X X X X X X X X Note: • If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become dark and blank for some programs. Should this occur, switch the Closed Caption mode to “OFF”. (Dark and Blank Picture) Calling for Service For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies, or customer assistance, please call 1-800-BE-SHARP. 33 32C240(35-36) 35 03.11.28, 0:59 PM Dimension: 140mm x 215mm Specifications MODEL 27C240 Receiving System NTSC Stereo Broadcast MTS (STEREO/SAP) Reception Channels AIR CATV Channel Tuning VHF 2-13 ch UHF 14-69 ch 1-125 ch 181-channel Reception PLL tuning system Antenna Input Impedance VHF/UHF 75 ohm Unbalanced Screen Size 27˝ Diagonally Measured Terminals Audio/Video input x 2 (Front x 1, Rear x 1), S-Video input x 1 (Rear) Sound Output 1.5 W (RMS) x 2 Power Source AC 120 V, 60 Hz Power Consumption 105 W Dimensions 253/4˝ (W) x 2341/64˝ (H) x 2023/32˝ (D) [654 mm (W) x 600 mm (H) x 526 mm (D)] Weight (approx.) 70.8 lbs. (32 kg) • Design and specifications are subject to change without notice. 34 32C240(35-36) 36 03.11.28, 0:59 PM Dimension: 140mm x 215mm (ESPAÑOL) Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro. IMPORTANTE Sírvase anotar el modelo del televisor y los números de serie en el espacio provisto, para ayudar a reportar en caso de pérdida o robo. Los números están ubicados en la parte posterior del televisor. N° de modelo : N° de serie : INFORMACIÓN IMPORTANTE Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato. PRIMERA – GARANTÍA Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en cuanto a piezas, servicio técnico y mano de obra aplicable a su adquisición. SEGUNDA – ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre inspección, modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de consumidor de 1972. LEA CUIDADOSAMENTE LA CLÁUSULA “GARANTÍA LIMITADA” DE LA ÚLTIMA PÁGINA. REDUCIR EL RIESGO DE INCENDIO O DESCARGA ADVERTENCIA : PARA ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD. El relámpago con cabeza de flecha dentro de un triángulo trata de indicar al usuario que las partes dentro del producto representan riesgo de electrochoque para las personas. PRECAUCIÓN : PARA REDUCIR EL RIESGO DE DESCARGAS ELÉCTRICAS, NO RETIRE LA CUBIERTA (NI EL PANEL POSTERIOR). NO CONTIENE PIEZAS REPARABLES POR EL USUARIO. SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE SERVICIO TÉCNICO ESPECIALIZADO. El signo de exclamación dentro de un triángulo trata de indicar al usuario que las instrucciones impor tantes de operación y servicio se encuentran en los documentos con el aparato. “Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención del instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene las directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.” ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada que se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad del usuario para utilizar este equipo. DESECHO DEL PRODUCTO Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo. El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con Electronics Industries Alliance: www.eiae.org 35 32C240(37-39) 37 03.11.28, 0:59 PM Dimension: 140mm x 215mm INFORMACIÓN IMPORTANTE (Continuación) PRECAUCIÓN: • No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado. • Para impedir un incendio, no ponga nunca ningún tipo de vela o llama al descubierto encima o cerca del televisor. • Para impedir un incendio o una descarga eléctrica, no exponga este aparato al goteo ni a las salpicaduras. Tampoco deberán ponerse encima de los productos objetos llenos de líquidos como, por ejemplo, floreros. MEDIDAS DE SEGURIDAD IMPORTANTES PRECAUCIÓN : Lea por favor todas estas instrucciones antes de poner en funcionamiento su televisor, y guárdelas para poder utilizarlas en el futuro. La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Desenchufe el televisor del tomacorriente antes de limpiarlo. No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo. No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros. No utilice el televisor cerca del agua – por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en un sótano húmedo, cerca de una piscina, etc. No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con el televisor. La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas rápidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la combinación de televisor y carrito se volteen. Cuando instale el televisor en una pared o en una estantería siga las instrucciones del fabricante, y utilice el kit de montaje aprobado por el fabricante. Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para que éste funcione bien y para evitar que se caliente. Estas aberturas no deben taparse nunca. Este televisor no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación apropiada. Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar. Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien adquirió el televisor o con la compañía eléctrica local. En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de uso. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos. El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente. Si el enchufe no entra en el tomacorriente, pídale a un electricista que le coloque un tomacorriente nuevo. No modifique el enchufe porque anulará esta característica de seguridad. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable pueda ser deformado por personas que caminen sobre él. 36 32C240(37-39) 38 03.11.28, 1:00 PM Dimension: 140mm x 215mm MEDIDAS DE SEGURIDAD IMPORTANTES (Continuación) 13. 14. Cumpla con todos los avisos y las instrucciones marcados en el televisor. Si se conecta una antena exterior al televisor, asegúrese de que el sistema de antena esté conectado a tierra para obtener cierta protección ante los aumentos de voltaje y la acumulación de cargas estáticas. La sección 810 del Código Eléctrico Nacional ofrece información relacionada con la conexión a tierra correcta del poste y la estructura de apoyo, la conexión a tierra del cable de entrada a una unidad de descarga, el tamaño de los conductores de conexión a tierra, la ubicación de la unidad de descarga de antena, la conexión a los electrodos de conexión a tierra, y los requisitos para el electrodo de conexión a tierra. 15. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la sobretensión en la línea de alimentación. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de luces eléctricas o circuitos de alimentación. Tampoco debe ubicarse donde pueda caer sobre tales líneas o circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado para no tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o descarga eléctrica. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca ningún tipo de líquido sobre el televisor. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una descarga de tensión u otros peligros. Las reparaciones debe realizarlas el personal de servicio CALIFICADO. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se produzcan las condiciones siguientes: A. Cuando el cable de la alimentación o el enchufe estén estropeados. B. Cuando haya derramado un líquido sobre el televisor. C. Si el televisor ha quedado expuesto a la lluvia o al agua. D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente los controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles podría estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que éste lo repare y lo devuelva a su condición normal. E. Si el televisor se ha caído o la caja se ha estropeado. F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio de reparaciones. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún problema. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de CAMBIO especificadas por el fabricante, aquellas que tengan las mismas características que las piezas originales. Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u otros peligros. 37 16. 17. 18. 19. 20. 21. 22. 32C240(37-39) 39 03.11.28, 1:00 PM Dimension: 140mm x 215mm Referencia rápida de los controles de operación • Nombres de los componentes (ESPAÑOL) Panel Delantero Terminal IN 2 (vídeo/audio) ALIMENTACION (POWER) Pulsando → Enciende (On). Pulsando nuevamente → Apaga (Off). SENSOR DE CONTROL REMOTE MENU (MENU) Pulsando → Accede al MENU PRINCIPAL. Pulsando nuevamente → Sale del MENU PRINCIPAL. AUMENTO/DISMINUCION DEL VOLUMEN (VOL) (k) Aumenta el sonido. (l) Disminuye el sonido. CANAL SUPERIOR/INFERIOR (a) Selecciona el siguiente canal superior. (s) Selecciona el siguiente canal inferior. Funciones Básicas Del Control Remoto Ventanilla del transmisor de infrarrojos ALIMENTACION (POWER) Pulsando → Enciende (On). Pulsando nuevamente → Apaga (Off). TECLADO A DISTANCIA (REMOTE KEYPAD) Para tener acceso a cualquier canal empleando las teclas. ENTRADA (INPUT) Pulsando → Cambia al modo de entrada 1 del vídeo externo. Pulsando 2 veces → Cambia al modo de entrada 2 del vídeo externo. Pulsando 3 veces → Vuelve al modo TV original. Consulte la página 32. RETORNO AL CANAL ANTERIOR (FLASHBACK) Para volver al canal anterior. AUMENTO/DISMINUCION DEL VOLUMEN (VOLUME UP/DOWN) (k) Aumenta el sonido. (l) Disminuye el sonido. • Cambia o selecciona los ajustes de TV en la visualización en pantalla. CANAL SUPERIOR/INFERIOR (CHANNEL UP/DOWN) (a) Selecciona el siguiente canal superior. (s) Selecciona el siguiente canal inferior. • Consulte las páginas 27-29 para obtener información sobre el preajuste de canales. • En el modo de MENU, mueve la marca “ E ”. SILENCIAMIENTO (MUTE) Pulsando → Silencia el sonido. Pulsando nuevamente → Restaura el sonido. • Cuando se silencia el sonido, CLOSED CAPTION aparece si se encuentra disponible. PREPARACION (MENU) Pulsando → Accede al MENU PRINCIPAL. Pulsando nuevamente → Sale del MENU PRINCIPAL. TV VISUALIZACION (DISPLAY) Pulsando → Aparece el canal de recepción por cuatro segundos. Pulsando nuevamente → Elimina la visualización. • En el modo de “Closed Caption” se muestra el canal de recepción por un corto tiempo. Nota: • Las ilustraciones del televisor y del mando a distancia, y las indicaciones en pantalla, de este manual pueden diferir de su aspecto real. 28 32C240(40) 40 03.11.28, 1:00 PM Dimension: 140mm x 215mm Antes de llamar al servicio de reparaciones PROBLEMA LISTA DE COMPROBACIONES DE SERVICIO RAPIDO POSIBLE SOLUCIÓN Pruebe con otro canal y si todo está bien, el problema puede ser de la emisora. Está conectado el televisor? Llega electricidad al tomacorrientes? Está conectado el interruptor del televisor? Está conectado la antena al terminal del panel posterior del televisor? Si utiliza una antena exterior, cerciórese de que el cable no esté dañado. Compruebe si hay interferencia local. Desconecte el interruptor POWER y vuelva a conectarlo después de transcurrir un minuto. Ajuste el control de COLOR. Ajuste el control de MATIZ. Verifique los productos externos de Video/Audio, revise si hay fugas de conexiones sueltas o rotas. Compruebe el estado de las pilas del mando a distancia. Desactive (OFF) el modo CLOSED CAPTION / Desactive (OFF) el modo Ahorro de Energía (Energy Save). Desenchufe el televisor y vuelva a enchufarlo después de dos minutos o más. El vídeo o el reproductor de discos de video no reproducen imágenes El equipo de video/audio externo no produce imágenes ni sonido El mando a distancia no funciona Barras en la pantalla Imagen distorsionada La imagen se desplaza verticalmente No hay color Mala recepción de algunos canales Imagen débil Franjas en la imagen Imagen fantasma Imagen borrosa Sonido adecuado, imagen mala Imagen adecuada, sonido malo No hay imagen ni sonido Imagen oscura y en blanco Interferencia de ruido eléctrico externo con el funcionamiento del televisor El color se ve distorsionado en parte de la pantalla Verifique estos puntos para ver si usted mismo puede solucionar el problema. X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X XX X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Nota: • Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la pantalla puede ponerse en blanco y negro. Si ocurriera esto, ponga el modo CLOSED CAPTION en OFF. (Imagen oscura y en blanco) Solicitud de servicio técnico Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP. 39 32C240(41) 41 03.11.28, 1:01 PM Dimension: 140mm x 215mm (FRANÇAIS) Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure. IMPORTANT Afin de vous aider en cas de perte ou de vol, inscrivez les numéros de série et de modèle du téléviseur dans les espaces fournis à cet effet. Ces numéros sont situés à l’arrière du téléviseur. N° du modèle : N° de série : INFORMATIONS IMPORTANTES Deux raisons importantes d’enregistrer rapidement la garantie de votre nouveau téléviseur SHARP à l’aide de la carte d’enregistrement (REGISTRATION CARD) incluse dans le colis : LA PREMIERE – LA GARANTIE Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du service et des travaux applicable à votre achat. LA DEUXIEME – LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION (CONSUMER PRODUCT SAFETY ACT) Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du rappel de votre produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la sécurité du produit de consommation. LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE LIMITEE» DE LA DERNIÈRE PAGE. AVERTISSEMENT: POUR REDUIRE LE RISQUE D’INCENDIE OU D’ELECTROCUTION, N’EXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES. Le symbole de la foudre sous forme de flèche dans un triangle est supposé indiquer à l’utilisateur que les pièces internes au produit constituent un risque d’électrocution. ATTENTION : POUR REDUIRE LE RISQUE D’ELECTROCUTION, NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE). L’APPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR PAR L’UTILISATEUR. CONSULTEZ UN PERSONNEL QUALIFIE POUR LA MAINTENANCE. Le symbole du point d’exclamation dans un triangle est supposé indiquer à l’utilisateur que des instructions de fonctionnement et de maintenance importantes se trouvent dans la documentation fournie avec l’équipement. “Note à l’intention de l’installateur du système CATV : Ce rappel est fourni afin d’attirer l’attention de l’installateur de système CATV sur l’article 820-40 du National Electrical Code qui indique les règles de mise à la terre appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au réseau commun de mise à la terre du bâtiment, au point le plus proche possible de la source.” AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir de l’utilisateur sur le fonctionnement de cet équipement. MISE AU REBUT DU PRODUIT Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre. La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour toute information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions importantes préconisées par la société Electronics Industries Alliance sur : www.eiae.org. 40 32C240(42-44) 42 03.11.28, 1:01 PM Dimension: 140mm x 215mm INFORMATIONS IMPORTANTES (Suite) ATTENTION: • Ne placez pas le cordon d’alimentation sous le téléviseur ou sous tout autre objet lourd. • Ne placez pas de bougies ni de flammes nues sur le téléviseur ou à sa proximité, afin d’éviter les incendies. • Veillez à ne pas éclabousser ni faire tomber de l’eau sur ces appareils afin d’éviter les incendies ou les électrocutions. Ne placez jamais d’objets remplis de liquide, comme des vases, sur ces appareils. PRÉCAUTIONS IMPORTANTES ATTENTION : Veuillez lire toutes ces instructions avant d’utiliser votre télévision et conservezles pour un usage ultérieur. L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de façon à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER DES RISQUES D’ELECTROCUTION OU D’INCENDIE. Afin de ne pas détruire les protections intégrées à cet appareil, respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance. 1. Débranchez la télévision avant de la nettoyer. 2. N’utilisez pas de nettoyants liquides ou d’aérosols et utilisez un chiffon humide. 3. N’utilisez pas d’accessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques. 4. N’utilisez pas cette télévision à proximité d’eau — par exemple, près d’une baignoire, d’un lavabo, d’un évier ou d’un bac à laver, dans une cave humide ou près d’une piscine, etc. 5. Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber et provoquer de graves lésions à toute personne et causer de sérieux dommages à l’équipement. Utilisez uniquement un support ou un chariot recommandé par le fabricant ou vendu avec la télévision. 6. L’ensemble télévision-chariot doit être déplacé délicatement. Les arrêts brusques, une force excessive et des surfaces inégales peuvent renverser l’ensemble. 7. L’installation au mur ou sur une tablette doit être réalisée conformément aux instructions du fabricant et à l’aide d’un kit de montage approuvé par ce dernier. 8. Les fentes et les ouvertures du châssis à l’arrière ou dans la partie inférieure sont prévus pour la ventilation. Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces ouvertures ne doivent être ni obturées, ni recouvertes. La télévision ne doit pas être placée dans un endroit encastré tel qu’une bibliothèque, sauf si une ventilation adéquate est prévue. 9. Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure ne doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface similaire. Cette télévision ne doit être placée ni à proximité d’un radiateur ou d’un registre de chaleur, ni dessus. 10. Cette télévision doit être alimentée uniquement par le type d’alimentation électrique indiqué sur l’étiquette. Si vous n’êtes pas sûr du type d’alimentation de votre domicile, consultez votre revendeur de télévision ou la compagnie d’électricité locale (EDF en France). Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode d’emploi. 11. Du point de vue de la sécurité, la télévision est équipée d’une fiche polarisée à 2 fils (une lame plus importante que l’autre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul sens. Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité. 12. Ne posez rien sur le cordon d’alimentation. Ne placez pas la télévision dans un emplacement où le cordon d’alimentation est susceptible d’être endommagé par le passage répété de personnes. 41 32C240(42-44) 43 03.11.28, 1:01 PM Dimension: 140mm x 215mm PRÉCAUTIONS IMPORTANTES (Suite) 13. Respectez tous les avertissements et instructions mentionnés sur la télévision. 14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la terre correcte de la potence et de la structure portante, à une mise à la terre du fil d’entrée à une unité de décharge d’antenne, aux dimensions des conducteurs de terre, à l’emplacement de l’unité de décharge d’antenne, au raccordement des prises de terre ainsi qu’à leurs exigences. EXEMPLE DE MISE À LA TERRE D’UNE ANTENNE SELON LE CODE NATIONAL DE L’ÉLECTRICITÉ DESCENTE D’ANTENNE COLLIER DE MISE À LA TERRE BOÎTIER DE LA COMPAGNIE D’ÉLECTRICITÉ NEC – CODE NATIONAL DE L’ÉLECTRICITÉ UNITÉ DE DÉCHARGE D’ANTENNE (NEC SECTION 810-20) CONDUCTEURS DE TERRE (NEC SECTION 810-21) COLLIERS DE MISE À LA TERRE ÉLECTRODE DE TERRE DE LA COMPAGNIE D’ÉLECTRICITÉ (NEC ART. 250, PARTIE H) 15. Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée pendant de longues périodes, débranchez-la et déconnectez l’antenne. Vous éviterez ainsi des dommages à votre équipement suite à la foudre et des poussées de tension. 16. Un système d’antenne extérieure ne doit pas être situé à proximité de lignes aériennes ou d’autres groupes électrogènes ou circuits électriques ou dans des emplacements où l’antenne pourrait tomber sur ce type de lignes ou circuits. Lors de l’installation d’un système d’antenne extérieure, faites extrêmement attention à ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal. 17. Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque d’incendie ou d’électrocution. 18. N’introduisez jamais d’objets à travers les fentes du châssis, car ils pourraient entrer en contact avec des points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une électrocution. Ne répandez jamais de liquides sur la télévision. 19. N’essayez pas de réparer vous-même votre télévision. L’ouverture ou le retrait des capots peut vous exposer à une tension dangereuse ou à d’autres risques. Confiez toutes les opérations de maintenance à un personnel qualifié. 20. Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les opérations de maintenance à un personnel qualifié : A. lorsque le cordon d’alimentation ou la fiche est endommagé ou effiloché ; B. si du liquide a été répandu sur/dans la télévision ; C. si la télévision a été exposée à la pluie ou à l’eau ; D. si la télévision ne fonctionne pas normalement même en respectant le mode d’emploi. Réglez uniquement les commandes abordées par le mode d’emploi. Des réglages inappropriés d’autres commandes peuvent occasionner des dommages et nécessiteront ensuite, dans la plupart des cas, une intervention plus importante d’un technicien qualifié pour que la télévision fonctionne normalement ; E. si la télévision a été renversée ou que le châssis est endommagé ; F. lorsque la télévision présente une altération visible des performances — cela indique un besoin de maintenance. 21. Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles de sécurité classiques afin de déterminer si la télévision est en bon état de marche. 22. Lorsqu’un remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des pièces de rechange spécifiées par le fabricant et qu’elles aient les mêmes caractéristiques que la pièce d’origine. Des remplacements non autorisés peuvent occasionner un incendie, une électrocution ou d’autres risques. 42 32C240(42-44) 44 03.11.28, 1:01 PM Dimension: 140mm x 215mm Référence rapide sur les commandes • Nomenclature (FRANÇAIS) Panneau Avant ALIMENTATION (POWER) Appuyer → Pour mettre sous tension. Appuyer de nouveau → Pour mettre hors tension. CAPTEUR DE TÉLÉCOMMANDE RÈGLAGE (MENU) Appuyer → Pour mettre sous tension. Appuyer de nouveau → Pour mettre hors tension. PRISÉS D’ENTRÉE VIDÉO/ AUDIO IN 2 AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOL) (k) Pour augmenter le volume du son. (l) Pour diminuer le volume du son. Canal HAUT/BAS (a) Sélectionne le canal supérieur suivant. (s) Sélectionne le canal inférieur précédent. Fonctions de base de la télécommande Fenêtre d’émission du signal infrarouge ALIMENTATION (POWER) Appuyer → Pour mettre sous tension. Appuyer de nouveau → Pour mettre hors tension. PAVE NUMERIQUE DE COMMANDE A DISTANCE (REMOTE KEYPAD) Sélectionne directement le canal voulu sur le pavé numérique. ENTRÉE (INPUT) Appuyer → Pour sélectionner le mode ENTRÉE 1 vidéo externe. Appuyer 2 fois → Pour sélectionner le mode ENTRÉE 2 vidéo externe. Appuyer 3 fois → Pour revenir au mode TV ENTRÉE 3 vidéo externe ou le mode COMinitial (Voir page 34). RETOUR (FLASHBACK) Rappelle le canal regardé précédent. TOUCHES DES CANAUX CROISSANT/ DÉCROISSANT (CHANNEL UP/DOWN) (a) Sélectionne le canal supérieur suivant. (s) Sélectionne le canal inférieur précédent. • Voir pages 27–29 pour prérégler les canaux. • Déplace le curseur “ E ” sur l’écran du MENU. AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOLUME UP/ DOWN) (k) Pour augmenter le volume du son. (l) Pour diminuer le volume du son. • Modifie ou sélectionne les réglages TV sur l’affichage sur écran. SOURDINE (MUTE) Appuyer → Mise en sourdine du son. Appuyer de nouveau → Rétablissement du son. • Lorsque le son est coupé, SOUS-TITRE apparaît si la fonction est disponible. RÉGLAGE (MENU) Appuyer → Accès au MENU PRINCIPAL. Appuyer de nouveau → Sortie du MENU PRINCIPAL. TV AFFICHAGE (DISPLAY) Appuyer → Pour afficher le canal reçu pendant quatre secondes. Appuyer de nouveau → Pour faire disparaître le canal. • Pour afficher temporairement le canal reçu en mode Sous-titres. Remarque: • Les illustrations du téléviseur et de la télécommande ainsi que les affichages à l’écran dans ce mode d’emploi diffèrent de la réalité. 43 32C240(45) 45 03.11.28, 1:02 PM Dimension: 140mm x 215mm Avant d’appeler un réparateur SOLUTION POSSIBLE Image affaiblie Lignes ou rayures dans l’image Images fantômes Image brouillée Son normal, image médiocre Image normale, son médiocre Ni son, ni image Image sombre et vide Bruit électrique extérieur interférant avec le fonctionnement du téléviseur La couleur sur une partie de l’écran semble altérée PROBLÉME LISTE DES VÉRIFICATIONS POUR UN DÉPANNAGE RAPIDE Pas de reproduction d’un magnétoscope ou lecteur de disque Pas d’image ou de son d’un appareil vidéo/audio externe La télécommande ne fonctionne pas Barres sur l’écran Distorsion de l’image L’image défile verticalement Pas de couleur Faible réception de certains canaux Vérifier les points suivants afin de déterminer s’il est possible de remédier au problème par un simple réglage des commandes. Essayer un nouveau canal. S’il fonctionne, il s’agit probablement d’une panne de la chaîne. X X X X X X X X X X X X X X X X Le téléviseur est-il branché? La prise secteur fonctionne-t-elle? X X X X X X X X X X X X X X X X X X L’interrupteur POWER du téléviseur est-il sous tension? X X X X X X X X X X X X X X X X X X L’antenne est-elle raccordée aux bornes à l’arrière de l’appareil? X X X X X X X X X X X X X X X X X X Si l’antenne extérieure est utilisée, s’assurer qu’il n’y a pas de fils sectionnés. X X X X X X X X X X X X X X X X X X Vérifier s’il n’y a pas d’interférence locale ou de bruit électrique extérieur. X X X X X X X X X X X X X X X X X X Mettre l’interrupteur POWER hors tension puis de nouveau sous tension au bout d’une minute. X X X X X X X X X X X X X X X X X X Régler la commande de COULEUR. X X X X X X X X X X X X X X X X X X Régler la commande de CONTRASTE. X X X X X X X X X X X X X X X X X X Vérifier l’appareil vidéo/audio externe : s’assurer que les câbles de connexion ne sont pas desserrés ou cassés. X X X X X X X X X X X X X X X X X X Vérifier les piles de la télécommande. X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Mettre le mode sous-titrage hors service “ARRÊT” Mode d’économie d’énergie sur “ARRÊT”. Débrancher le téléviseur et le rebrancher après deux minutes. X Remarque: • En mode TEXTE, s’il n’y a pas d’émission TEXTE à recevoir, l’écran du téléviseur pourrait être sombre et vide. Dans ce cas, placer le mode Sous-titrage hors service. (Image sombre et vide) Appel au service après-vente Pour connaître l’emplacement du centre de service après-vente agréé Sharp le plus proche ou pour obtenir de la documentation sur les produits, des accessoires, des consommables ou une aide au consommateur, appelez le 1-800-BE-SHARP. 46 32C240(46) 46 03.11.28, 1:02 PM Dimension: 140mm x 215mm Limited Warranty CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Model Specific Section Your Product Model Number & Description: 27C240, 27 inch Color Television (Be sure to have this information available when you need service for your Product.) Warranty Period for this Product: One (1) year parts and labor. The warranty period continues for an additional one (1) year, for a total of two (2) years, with respect to the picture tube(s) in the Product for parts only. Labor and service are not provided free of charge for this additional period. Additional Item(s) Excluded from Warranty Coverage (if any): Non-rechargeable batteries. Where to Obtain Service: From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1800-BE-SHARP. What to Do to Obtain Service: Contact your Sharp Authorized Servicer to obtain in-home service for this Product. The Servicer will come to your home and if it is necessary to remove the Product, the Servicer will reinstall it. Be sure to have Proof of Purchase available. TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com 47 32C240(47-48) 47 03.11.28, 1:02 PM Dimension: 140mm x 215mm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45

Sharp 27C240 Manual de usuario

Categoría
Televisores LCD
Tipo
Manual de usuario
Este manual también es adecuado para

En otros idiomas