©
2008 All rights reserved.
YAMAHA ELECTRONICS CORPORATION, USA
6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD.
135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H.
SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A.
RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD.
YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B.
J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY. LTD.
LEVEL 1, 99 QUEENSBRIDGE STREET, SOUTHBANK, VIC 3006, AUSTRALIA
Caution: Read this before operating your unit.
To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
1 Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or
cold. (Do not use/keep this unit in a car etc.)
2 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
3 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high
humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to
this unit, and/or personal injury.
4 Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing.
On the top of this unit, do NOT place:
- Other components, as they may cause damage and/or discoloration on the surface of this unit.
- Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.
- Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.
5 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit
rises, it may cause fire, damage to this unit, and/or personal injury.
6 Do not plug this unit into an AC wall outlet until all connections are complete.
7 Do not operate this unit upside-down. They may overheat, possibly causing damage.
8 Do not use force on switches, knobs, and/or cords.
9 When disconnecting the AC adaptor from the wall outlet, grasp the AC adaptor; do not pull the cord.
10 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
11 Only the voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause
fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with
a voltage other than that specified.
12 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should
never be opened for any reason.
13 When not planning to use this unit for long periods of time (i.e. when going on vacation), disconnect the AC adaptor from the AC wall
outlet.
14 Be sure to read the “Troubleshooting” section regarding common operating errors before concluding that the unit is faulty.
15 Before moving this unit, press to set this unit to off, and disconnect the AC adaptor from the wall outlet.
16 Be sure to use the AC adaptor supplied with this unit. Using an AC adaptor other than the one provided may cause fire or damage to this unit.
17 Install this unit near the wall outlet and where the AC adaptor can be reached easily.
18 For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug
it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.
Thank you for selecting this Yamaha product.
■ About the status indicator (LED)
If the problem you are experiencing is not listed below, set this unit to off, disconnect the AC adaptor, and
contact the nearest authorized Yamaha dealer or service center.
NATURAL SOUND SPEAKER SYSTEM
NX-A02 OWNER’S MANUAL
This unit features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color.
Should this happen, move this unit away from the TV set.
This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off by
. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. In
this state, this unit is designed to consume a very small quantity of power.
Introduction
Controls and functions
Connections
Power supplies
Audio inputs
◆ Real stereo sound
The high quality amplifier, titanium diaphragm and
Yamaha’s unique SR-Bass technology achieve high
quality sound.
◆
PowerStorage™ circuit (High 20 W
power)
Yamaha’s original power technology enables an
impressive 20 W output (Max. Instantaneous Power).
■ Supplied accessory
AC adaptor (DC 12 V, 1 A) .......................................... x 1
The shape of the adaptor may vary depending on the area
where you purchased.
(Asia model: MU12-2120100-C5)
(Taiwan model: MU12-2120100-A1)
3.5 mm stereo mini plug cable (0.5 m)........................... x 1
“Swing Radiator Bass™” is a trademark of YAMAHA
CORPORATION.
PowerStorage™
“PowerStorage™” is a trademark of YAMAHA
CORPORATION.
1
S
tatus indicator
(
LED
)
Indicates the current status of this unit. For details,
refer to “About the status indicator (LED)”.
2 (Mute button)
Mutes the sound. To cancel the mute, press
again or / . The status indicator flashes during
mute.
3 (Power button)
Turns this unit on. Press again to turn this unit
off. When this unit is on, the power indicator lights
up.
4 / (Volume buttons)
Adjust the volume level. Press to increase the
volume level and press to decrease.
34
1 2
1
Connect the supplied AC adaptor to DC
IN 12V terminal at the back of this unit.
2 Plug the AC adaptor to the AC wall
outlet.
To AC wall outlet
AC adaptor
(supplied)
DC IN 12V terminal
C
onnect an audio output jack of your
portable audio player and the PORTABLE
IN jack of this unit using the supplied
3.5 mm stereo mini plug cable.
Before connecting, make sure that this unit is turned off.
PORTABLE IN jack
Supplied 3.5 mm stereo mini plug cable
Note
Using this unit
LED status The current status of this unit
Lit This unit is on.
Flashing This unit is muted.
Flashes once The volume of this unit is the maximum or minimum.
Off This unit is off, or power supply is not connected.
Troubleshooting
Problem Cause Remedy
No sound.
The connection between this unit and
your portable audio player is not correct.
Connect the 3.5 mm stereo mini plug
cable properly.
The volume is set to the minimum. Increase the volume level.
This unit is muted. Cancel the mute.
The volume level is
unstable.
The limiter control has been activated
due to excessive input.
Decrease the volume level.
Specifications
1
Press to turn this unit on.
The status indicator (LED) lights up.
2 Start playback of your portable audio
player.
3 Adjust the volume level using / .
y
• This unit is a stereo speaker. To
enjoy the fine sound balance
between right and left, face the
Yamaha logo to the listening
position.
• When not using this unit, press to turn this unit off
to save the power.
■ After using this unit
1 Stop playback of your portable audio
player.
2 Press to turn this unit off.
The status indicator (LED) turns off.
Speaker type .......................... 1-box stereo, Twin SR-Bass
Magnetic shielding type
Driver ........................ 45 mm Ti-cone full-range driver x 2
Input (Analog) ............................ 3.5 mm Stereo mini jack
Dynamic power ............................... 6 W x 2 (1 kHz, 6 Ω)
Max. instantaneous power*
...................................... 10 W x 2 (1 kHz, 6 Ω, 10% THD)
Input sensitivity/Impedance ........................ 200 mV/20 kΩ
Maximum input signal
Analog input ......................................................... 2.0 V
Frequency response ................................. 90 Hz to 20 kHz
Power supply
AC adaptor ......................... 100 to 240 V AC, 50/60 Hz
Power consumption ..................................................... 8 W
Standby power consumption .................................... 0.6 W
Operating environment
Temperature ................................................+5 to +35 °C
Dimensions (W x H x D) ....................... 84 x 170 x 84 mm
Weight ........................................................................ 600 g
*Refers to the power that can be output for 100 ms
continuously.
Please note that all specifications are subject to
change without notice.
English
Printed in China WN31760-1
VL
En_NX-A02_VL.fm Page 1 Wednesday, December 19, 2007 6:35 PM
-
1
en otros idiomas
- English: Yamaha NX-A02 Owner's manual
Artículos relacionados
-
Yamaha NX-B02 El manual del propietario
-
Yamaha NX-A01 El manual del propietario
-
Yamaha NX-U10 El manual del propietario
-
Yamaha PDX-W61 El manual del propietario
-
-
-
-
-