Work-pro POWER SPLITTER 16 Manual de usuario

Work-pro
Marca
Work-pro
Modelo
POWER SPLITTER 16
Tipo
Manual de usuario
POWER SPLITTER 16
User Manual
Version1.1
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 1
SAFETY INSTRUCTIONS
1. Read this manual carefully.
2. Follow all instructions and warnings.
3. Only use accessories specified by WORK PRO.
4. Follow the safety instructions of your country.
WELCOME TO WORK PRO
Thank you for choosing the WORK PRO POWER SPLITTER 16 device.
This document contains essential information on the use of the system. Read this document carefully to become
familiar with the system.
Please check the WORK PRO website regularly to download the latest version of the document:
https://www.workpro.es/
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 2
CONTENT / CONTENIDO
1. SAFETY INSTRUCTIONS .......................................................................................................................................................... 3
2. OVERVIEW ............................................................................................................................................................................. 4
3. INSTALLATION........................................................................................................................................................................ 5
4. CAUTIONS .............................................................................................................................................................................. 5
1. INDICACIONES DE SEGURIDAD .............................................................................................................................................. 7
2. VISTA GENERAL ...................................................................................................................................................................... 8
3. INSTALACIÓN ......................................................................................................................................................................... 9
4. PRECAUCIONES ...................................................................................................................................................................... 9
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 3
1. SAFETY INSTRUCTIONS
1. Read the instructions of this manual.
2. Keep these instructions in a safe place.
3. Heed and follow all warnings and instructions.
4. Please, respect your country safety regulations.
5. Don’t use this device close to the water or high humidity places. Clean only with dry cloth.
6. Don’t install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat. Make certain that the equipment is always installed so that is cooled and can’t
overheat.
7. Don’t block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
9. Only use attachments/accessories specified by WORK PRO.
10. Unplug this device during lightning storms or when unused for long periods of time.
11. The technical service is required when the device has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the device, doesn’t operate normally or has
been dropped.
12. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the
AC receptacle.
13. The mains plug of the power supply cord shall remain readily operable.
14. WARNING – to reduce the risk of fire or electric shock, don’t expose this device to rain or humidity.
15. Don’t expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as
vases, are placed on the equipment.
16. For rigging installation, please, follow the recommendations included in this user manual.
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 4
2. OVERVIEW
POWER SPLITTER 16 is a 16A three-phase versatile power distributor with 1x5 contacts male CEE socket
3x16A+N+E power input. For loading and linking purposes, the device includes 6 female schuko sockets and one
1x5 contacts female CEE socket 3x16A+N+E respectively.
Each phase is driven to two schucko sockets and protected by a 16A MCB when a fault condition such as a short-
circuit or voltage peak occurs.
POWER SPLITTER 16 can be placed on the floor or fixed in a structure through a clamp using the 2 threaded points
in the lateral sides.
Technical Data:
Power Input
3x AC 230V 16A per phase (3-phase+N+E)
Input connector
5-contacts CEE male
Max. load
16A per phase
Load connector
6x schuko connectors (16A max.) each one
Output/Link connector
5-contacts CEE female
Housing
Die-cast aluminium
Dimensions (WxHxD)
367 x 107 x 150 mm
Weight
2 Kg
Features:
- 3-phase power distributor.
- 16A max. load per phase.
- 6x schuko connectors for load.
- 5-contacts CEE male and female connectors for power input & output.
- Transport handles and screwed points for fixation.
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 5
3. INSTALLATION
4. CAUTIONS
The electrical connection must only be carried out by qualified personal. Before installing, make sure you use the
correct contact occupation (phases, neutral, earth). Each device must be properly grounded and installed in
accordance with the relevant standards. Don’t use the device in a lightning storm or wet environment.
1. Never install the device directly on the surface of ordinary combustible material.
2. The equipment must be installed away from inflammable and explosive materials.
3. Do not replace with non-original spare parts. Contact your WORK PRO dealer.
Note: Before unpacking, check it for possible damage that might have occurred during transportation. If you find
any damage, please do not use the unit and contact the WORK PRO dealer.
Shortcircuit or voltage peak problem
The MBAs will cut off in case of short circuit or voltage peak on the respective load. In that case, activate the MBA,
if it cuts off again, please, check the device or devices connected in the corresponding phase in order to fix the
problem.
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 6
INSTRUCCIONES DE SEGURIDAD
1. Lea detenidamente este manual.
2. Siga todas las instrucciones y advertencias.
3. Únicamente utilice accesorios especificados por WORK PRO.
4. Respete las instrucciones de seguridad de su país.
5. Tenga cuidado con los niveles de sonido.
BIENVENIDO A WORK PRO
Gracias por elegir el dispositivo POWER SPLITTER 16 de WORK PRO.
Este documento contiene información esencial sobre el uso del sistema. Lea detenidamente este documento para
familiarizarse con el sistema.
Por favor, consulte regularmente el sitio web de WORK PRO para descargar la última versión del documento:
https://www.workpro.es/
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 7
1. INDICACIONES DE SEGURIDAD
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 8
2. VISTA GENERAL
POWER SPLITTER 16 es un versátil distribuidor de potencia trifásico de 16A con un conector hembra de 5 de
contactos CEE de 3x16A+N+E. Para las funciones de carga y link a otras unidades, el dispositivo incluye 6
conectores schuko hembra y un conector hembra de 5 de contactos CEE de 3x16A+N+E respectivamente.
Cada fase se deriva a dos conectores schucko y se protege con un MCB de 16 A cuando se produce un problema
como un cortocircuito o un pico de tensión.
POWER SPLITTER 16 puede colocarse en el suelo o fijarse en una estructura a través de una abrazadera usando
los 2 puntos con rosca en los laterales.
Datos Técnicos:
Entrada de potencia
3x AC 230V 16A por fase (3-fases+N+E)
Conector de entrada
5-contactos CEE macho
Máx. carga
16A por fase
Conector carga
6x schuko conectores (16A max.) cada uno
Conector Salida/Link
5-contactos CEE hembra
Recinto
Aluminio moldeado
Dimensiones (An x Al x Pr)
367 x 107 x 150 mm
Peso
2 Kg
Características:
- Distribuidor de potencia trifásico.
- 16A de carga máx. por fase.
- 6x conectores schuko para carga.
- Conectores CEE de 5 contactos macho y hembra para entrada y salida.
- Asas de transporte y puntos roscados para fijación.
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 9
3. INSTALACIÓN
4. PRECAUCIONES
La conexión eléctrica solo debe ser realizada por personal cualificado. Antes de instalar, asegúrese de utilizar la
ocupación de contactos correcta (fases, neutro, tierra). Cada dispositivo debe estar correctamente conectado a
tierra e instalado de acuerdo con las normas pertinentes. No use el dispositivo durante una tormenta eléctrica o en
un ambiente húmedo.
Nunca instale el dispositivo cerca de una fuente de combustión.
El equipo debe instalarse lejos de materiales inflamables y explosivos.
Si cambia alguna de las partes del dispositivo hágalo siempre con repuestos originales. Para ello contacte a su
proveedor.
Antes de desembalar compruebe si ha habido daños y se han debido al transporte o no. Si
encuentra algún daño, no utilice este dispositivo y póngase en contacto con el distribuidor de WORK PRO.
Problema de cortocircuito o picos de tensión
Los MBA saltarán en caso de cortocircuito o pico de tensión en la carga correspondiente. En ese caso, rearme el
MBA, si vuelve a apagarse, verifique el dispositivo o los dispositivos conectados en la fase correspondiente para
solucionar el problema.
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 10
POWER SPLITTER 16
USER MANUAL / MANUAL DE USUARIO
VERSION 1.1
POWER SPLITTER 16 www.workpro.es 11
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Work-pro POWER SPLITTER 16 Manual de usuario

Work-pro
Marca
Work-pro
Modelo
POWER SPLITTER 16
Tipo
Manual de usuario
Descargar PDF
informe

en otros idiomas

Artículos relacionados