Aiwa AWSP15TWL Audio System Manual de usuario

Tipo
Manual de usuario

El Aiwa AWSP15TWL Audio System es un sistema de sonido portátil y potente con una variedad de características que lo hacen ideal para fiestas, reuniones y otras ocasiones. Con su conectividad Bluetooth, puedes transmitir música de forma inalámbrica desde tu smartphone u otro dispositivo compatible. También puedes reproducir música desde una memoria USB o una tarjeta TF, o conectar una fuente de audio externa a través de la entrada auxiliar.

El Aiwa AWSP15TWL Audio System es un sistema de sonido portátil y potente con una variedad de características que lo hacen ideal para fiestas, reuniones y otras ocasiones. Con su conectividad Bluetooth, puedes transmitir música de forma inalámbrica desde tu smartphone u otro dispositivo compatible. También puedes reproducir música desde una memoria USB o una tarjeta TF, o conectar una fuente de audio externa a través de la entrada auxiliar.

Safety Precautions
Installation of this speaker cabinet must be carried out by qualified personnel following the
approved safety standards.
Do not attempt to clean the plastic enclosure with solvents or petrochemical based cleaners.
Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment
or smoke machines.
Do not expose the speaker cabinet to direct rain or stand in water. Liquid getting into the box will
risk a short circuit and will be hazardous.
Do not stack the speaker cabinet in a manner that could cause injury in case the cabinet is
detached.
Additional precautions
for
Auto-amplified devices of the series.
Before installation, ensure that the voltage and frequency of power outlet matches the power
requirements of the loudspeaker.
Disconnect from main power before to make connections in the loudspeaker.
Make sure that the power-cord is never crimped or damaged by sharp edges.
Never let the power-cord come into contact with other cables. Only handle the power-cord by
the plug.
In case of replacing the fuse, it must be changed by identical rate and dimensions.
Attention
Before connecting or operating your new loudspeaker, please study the accompanying
instruction manual paying special attention to the operating precautions and wiring procedure.
This symbol on the product or
on
Its packaging indicates that this product shall
not
be
treated
as
household waste. Instead
it
shall
be handed over to the applicable collection point for the recycling
of
electrical an electronic equipment By ensuring this product
is
disposed
of
correctly,
you
will
help
prevent potential negative consequences for the environment and
human
health, which
could
otherwise be caused by inappropriate waste handling of this product The recycling of
materials
will
help to conserve natural resources. For more detailed information about recycling of
this
product,
please contact your local city office, your household waste disposal service or the
shop
where you
purchased the
product.
>> Página 2<<
ENGLISH
Functions
>> Página 4<<
ENGLISH
1. MP3 screen.
2. Infrared indicator.
3. Mic priority.
4. In USB / TF / Bluetooth mode: press to go back to the previous track. In FM
mode:press to go to the previously stored FM station.
5. Play/pause in USB / TF / Bluetooth mode. In FM mode, press and hold this button
to start searching for radio stations and store them automatically in the memory.
6. In USB / TF / Bluetooth mode: press to go back to the next track. In FM mode:press to
go to the next stored FM station.
7. Input selector: Press this button to switch between the various inputs (USB, TF,
Bluetooth, FM). 8. REC play.
9. Press the button to become TWS mode to connect the two bluetooth.
10. Press the button to become an accompaniment.
11. USB stick input.
12. TF card input.
13. Left / Right Line output.
14. Left / Right Line input.
15. Light control: Press this button to switch between the various light(Flame /
Flame and color woofer ring / Flame activity / Slow gradual discoloration / Ordinary
spectrum / Ordinary spectrum and color woofer ring / Off).
16. Power Indicator.
17. Battery DC In 12V.
18. Master volume control.
19. AUX input via 3.5mm mini stereo jack.
20. Bass Volume Control.
21. Treble Volume Control
22. Echo Volume Control.
23. Mic Volume Control.
24. Charging indicator: the red light indicates that it is charging, and the green light
indicates that it is full.
25. MIC input.
26. Serial number.
27. AC input connector.
DESCRIPTION OF THE REMOTE CONTROL
1. Switch the MP3 player off.
2. Play/Pause the MP3 player, Scan the radio station.
3. Skip to previous track
4. Choosing music by numbers
5. Switch sources
6. Mute the sound of the MP3 player
7. EQ setting
8. Decrease volume of the player
9. Skip to next track
10. Increase volume of the player
11. Repeat
12. Switch the USB/TF
>> Página 5 <<
Precauciones de Seguridad
La instalación de este altavoz debe ser realizada por personal cualificado siguiendo las normas de
seguridad establecidas.
No intente limpiar la carcasa de plástico con disolventes o productos de limpieza petroquímicos.
No coloque objetos que sean fuentes de calor en el gabinete del altavoz como por ejemplo equipos
de iluminación o máquinas de humo.
No exponga el gabinete o altavoz a la lluvia directa ni al agua. El líquido que pueda entrar pone
en riesgo de un cortocircuito y será peligroso y/o puede causar daños.
No apile el gabinete o altavoz de manera que pueda causar lesiones en caso de que el gabinete
se desprenda.
Precauciones adicionales para dispositivos auto-amplificados
Antes de la instalación, asegúrese de que el voltaje y la frecuencia de la toma de corriente
coinciden con los requisitos de alimentación del altavoz.
Desconecte la alimentación principal antes de realizar conexiones en el altavoz.
Asegúrese de que el cable de alimentación no esté nunca encrespado o dañado por bordes
afilados. Nunca permita que el cable de alimentación entre en contacto con otros cables.
Solamente maneje el cable de alimentación manipulando por el enchufe.
En el caso de sustituir un fusible, debe cambiarse por uno de características y dimensiones
idénticas.
Atención
Antes de conectar o utilizar su nuevo altavoz, opere de acuerdo a instrucciones y prestando
especial atención a las precauciones de funcionamiento y al procedimiento de cableado.
Este s
í
mbolo en el producto o en su embalaje indica que este producto no debe ser tratado como
residuo dom
é
stico.En su lugar, debe entregarse al punto de recogida correspondiente para el
reciclado de equipos el
é
ctricos y electr
ó
nicos. Al garantizar que este producto se elimina
correctamente, ayudar
á
a prevenir posibles consecuencias negativas para el medio ambiente y la
salud humana, que de otro modo podr
í
an ser causadas por residuos inadecuados. El reciclaje de
materiales ayudar
á
a conservar los recursos naturales. Para obtener informaci
ó
n m
á
s detallada
sobre el reciclaje de este producto, p
ó
ngase en contacto con la oficina local de la ciudad, el servicio
de eliminaci
ó
n de desechos dom
é
sticos o la tienda donde adquiri
ó
el producto.
>> Página 6 <<
ESPAÑOL
Panel trasero
>> Página 7 <<
L
Funciones
>> Página 8 <<
ESPAÑOL
1. Pantalla MP3
2. Luces infrarrojas.
3. Prioridad MIC (micrófono).
4. En modo USB/TF/Bluetooth:volver a la anterior canción.En el modo FM:se puede
transferir a una estación de radio FM previamente almacenada
5. Reproducir/Pausar en el modo USB/sd/Bluetooth. En el modo FM, pulse este botón
para iniciar la búsqueda de la radio y almacenarla automáticamente en una
memoria.
6. Bajo el modo USB/TF/Bluetooth: vuelve a la siguiente canción. Bajo el modo FM:
Pulse para cambiar a la siguiente estación de FM almacenada.
7. Seleccionador de entrada: Pulse este botón para alternar entre las entradas
(USB,SD,bluetooth,FM).
8. Grabación y reproducción.
9. Pulse este botón para cambiar a modo TWS para conectar dos Bluetooth.
10. Aux in para acompañamiento de instrumento en vivo.
11. Entrada de memoria.
12. Entrada de la tarjeta.
13. Salida izquierda/derecha.
14. Entrada izquierda/derecha.
15. Control de luces: Este botón permite alternar entre las luces (Llama / llama y
anillo de color en el parlante / llama activa / decoloración gradual / espectro
ordinario y anillo de color en el parlante / apagado).
16. Luz de alimentación.
17. Entrada DC 12V.
18. Control de Volumen principal.
19. Entrada AUX través de un pequeño enchufe estéreo de 3.5 mm.
20. Control de Bajos.
21. Control de Agudos.
22. Control de Eco.
23. Control de Volumen del Micrófono.
24. Luces de carga: la luz roja indica que está cargada y la luz verde que está llena.
25. Entrada de micrófono.
26. Número de serie.
27. Conector de entrada.
DESCRIPCIÓN DEL CONTROL REMOTO
1. Encienda o apague el reproductior MP3.
2. Reproduzca / pause el reproductor MP3, busque la estación de radio.
3. Saltar a la pista anterior
4. Elegir sica por número
5. Cambiar de Fuente
6. Silencia el sonido del reproductor MP3
7. EQ ajuste
8. Disminuir el volumen del reproductor.
9. Pasar a la pista siguiente
10.
Aumenta el volumen del reproductor
11.
Repetir
12.
Cambie el USB / TF
>> Página 9<<
Control Remoto
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Aiwa AWSP15TWL Audio System Manual de usuario

Tipo
Manual de usuario

El Aiwa AWSP15TWL Audio System es un sistema de sonido portátil y potente con una variedad de características que lo hacen ideal para fiestas, reuniones y otras ocasiones. Con su conectividad Bluetooth, puedes transmitir música de forma inalámbrica desde tu smartphone u otro dispositivo compatible. También puedes reproducir música desde una memoria USB o una tarjeta TF, o conectar una fuente de audio externa a través de la entrada auxiliar.