LG UBNH368GSS0.ANWBLAR Manual de usuario

Marca: LG

Modelo: UBNH368GSS0.ANWBLAR

Categoría: Acondicionadores de aire móviles

Tipo: Manual de usuario

Este manual también es adecuado para

MFL69135901

TYPE : Ceiling Concealed Duct

MODEL : UB-H368GSS0 UB-H608RSS0

www.lg.com

OWNER’S MANUAL

Please read this manual carefully before operating

your set and retain it for future reference.

AIR

CONDITIONER

• Do not cool excessively indoors. This may be harmful for your health and may consume more

electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air condition-

er is used for many hours.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the

air flow or weaken the cooling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty

purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

Here are some tips that will help you minimize the power consumption when you use the air

conditioner. You can use your air conditioner more efficiently by referring to the instructions

below:

TIPS FOR SAVING ENERGY

ENGLISH

TIPS FOR SAVING ENERGY

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak

performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Use two or more people to lift and transport the product. Avoid personal injury.

• The information contained in the manual is intended for use by a qualified service technician

familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment mal-

function, property damage, personal injury and/or death.

Installation

• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.

- There is risk of fire or electric shock.

• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.

- Do not disassemble or repair the product. There is risk of fire or electric shock.

• Always ground the product.

- There is risk of fire or electric shock.

• Install the panel and the cover of control box securely.

- There is risk of fire or electric shock.

• Always install a dedicated circuit and breaker.

- Improper wiring or installation may cause fire or electric shock

• Use the correctly rated breaker or fuse.

- There is risk of fire or electric shock.

• Use the specified wires to connect the unit.

- There is risk of fire or electric shock.

• Do not install, remove, or re-install the unit by yourself (customer).

- There is risk of fire, electric shock, explosion, or injury.

• Be cautious when unpacking and installing the product.

- Sharp edges could cause injury. Be especially careful of the case edges and the fins on the con-

denser and evaporator.

• For installation, always contact the dealer or an Authorized Service Center.

- There is risk of fire, electric shock, explosion, or injury.

• Do not install the product on a defective installation stand.

- It may cause injury, accident, or damage to the product.

• Be sure the installation area does not deteriorate with age.

- If the base collapses, the air conditioner could fall with it, causing property damage, product failure,

and personal injury.

ENGLISH

SAFETY PRECAUTIONS

• Do not let the air conditioner run for a long time when the humidity is very high and a door or a win-

dow is left open. Moisture may condense and wet or damage furniture.

Operation

• Take care to ensure that power cable could not be pulled out or damaged during operation.

- There is risk of fire or electric shock.

• Do not place anything on the power cable.

- There is risk of fire or electric shock.

• Do not plug or unplug the power supply plug during operation.

- There is risk of fire or electric shock.

• Do not touch(operate) the product with wet hands.

- There is risk of fire or electrical shock.

• Do not place a heater or other appliances near the power cable.

- There is risk of fire and electric shock.

• Do not allow water to run into electric parts.

- It may cause failure of the product or electric shock.

• Do not store or use flammable gas or combustibles near the product.

- There is risk of fire or failure of product.

• Do not use the product in a tightly closed space for a long time.

- Oxygen deficiency could occur.

• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the prod-

uct on.

- Do not use the telephone or turn switches on or off. There is risk of explosion or fire

• If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect the

power supply cable.

- There is risk of electric shock or fire.

• Stop operation and close the window in storm or hurricane. If possible, remove the product from the

window before the hurricane arrives.

- There is risk of property damage, failure of product, or electric shock.

• Do not open the panel of the product during operation. (Do not touch the electrostatic filter, if the

unit is so equipped.)

- There is risk of physical injury, electric shock, or product failure.

• When the product is soaked (flooded or submerged), contact an Authorized Service Center.

- There is risk of fire or electric shock.

• Be cautious that water could not enter the product.

- There is risk of fire, electric shock, or product damage.

• Ventilate the product from time to time when operating it together with a stove, etc.

- There is risk of fire or electric shock.

• Turn the main power off when cleaning or maintaining the product.

- There is risk of electric shock.

• When the product is not be used for a long time, disconnect the power supply plug or turn off the

breaker.

- There is risk of product damage or failure, or unintended operation.

• Take care to ensure that nobody could step on or fall onto the unit.

- This could result in personal injury and product damage.

ENGLISH

SAFETY PRECAUTIONS

ENGLISH

CAUTION

Installation

• Always check for gas (refrigerant) pressure after installation or repair of product.

- Low refrigerant levels may cause failure of product.

• Install the drain hose to ensure that water is drained away properly.

- A bad connection may cause water leakage.

• Keep level even when installing the product.

- To avoid vibration or water leakage.

• Do not install the product where the noise or hot air from the outdoor unit could damage the neigh-

borhoods.

- It may cause a problem for your neighbors.

• Use two or more people to lift and transport the product. Avoid personal injury.

• Do not install the product where it will be exposed to sea wind (salt spray) directly.

- It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator

fins, could cause product malfunction or inefficient operation.

Operation

• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.)

- This could harm to your health.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-

sumer air conditioner, not a precision refrigeration system.

- There is risk of damage or loss of property.

• Do not block the inlet or outlet of air flow.

- It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.

- There is risk of fire, electric shock, or damage to the plastic parts of the product.

• Do not touch the metal parts of the product when removing the air filter. They are very sharp!

- There is risk of personal injury.

• Do not step on or put anything on the product. (outdoor units)

- There is risk of personal injury and failure of product.

• Always insert the filter securely. Clean the filter every four weeks or more often if necessary.

- A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or

damage.

• Do not insert hands or other objects through the air inlet or outlet while the product is operated.

- There are sharp and moving parts that could cause personal injury.

• Do not drink the water drained from the product.

- It is not sanitary and could cause serious health issues.

• Use a firm stool or ladder when cleaning or maintaining the product.

- Be careful and avoid personal injury.

• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and

new batteries or different types of batteries. There is rik of fire or explosion.

• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or

explode.

• If the liquid from the batteries gets onto your skin of blothes, wash it well wih clean water. Do not

use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other

health hazards.

• If you eat the liquid from the batteries, bruch your teeth and see doctor. Do not use the remote if

the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

ENGLISH

PRODUCT INTRODUCTION

Preparing for operation

• Contact an installation specialist for installation.

• Use a dedicated circuit.

Usage

• Being exposed to direct airflow for an extended period of time could be hazardous to your

health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.

• Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves

or other heating devices.

• Do not use this air conditioner for non-specified special purposes (e.g. preserving precision de-

vices, food, pets, plants, and art objects). Such usage could damage the items.

Cleaning and maintenance

• Do not touch the metal parts of the unit when removing the filter. Injuries can occur when han-

dling sharp metal edges.

• Do not use water to clean inside the air conditioner. Exposure to water can destroy the insula-

tion, leading to possible electric shock.

• When cleaning the unit, first make sure that the power and breaker are turned off. The fan ro-

tates at a very high speed during operation. There is a possibility of injury if the unit’s power is

accidentally triggered on while cleaning inner parts of the unit.

Service

For repair and maintenance, contact your authorized service dealer.

BEFORE USE

PRODUCT INTRODUCTION

ENGLISH

Simple Wired Remote Controller

TEMP

FAN

SPEED

OPER

MODE

1 Operation Display Panel

2 Temperature Control Button

3 Fan Speed Button

4 On/Off Button

5 Operation Mode select Button

* Each function will be shown on the dis-

play panel for three seconds or so

when the power is applied at first.

OWNER'S INSTRUCTION

ENGLISH

OWNER'S INSTRUCTION

Standard Operation - Cooling Mode

It cools the room by comfortable and clean wind.

TEMP

FAN

SPEED

OPER

MODE

Cooling operation will begin if you press

the button.

If you press the button, the cooling

operation will stop.

If you press the mode button during the

operation, the operation mode will be

changed in the order of cooling,

dry(dehumidification),heating,auto-operation

and fan operation. If the product is a

cooling-only model, the operation mode will

be changed in the order of cooling,

dry(dehumidification), auto-operation and fan

operation.

Press the temperature button and set the

desired room temperature lower than the

current room temperature.

Setting temp range : 18 °C~30 °C (64 °F~86 °F)

- If the desired temperature is set higher

than the current room temperature, the

cooling function will not begin and just the

blowing operation will continue.

TEMP

A click of the button will increase the

desired temperature by 1 °C or 2 °F.

A click of the button will decrease the

desired temperature by 1 °C or 2 °F.

ENGLISH

OWNER'S INSTRUCTION

Standard Operation - Heating Mode

It supplies warm wind to the indoor

If you want to set the heating operation,

press the button. And press the

button.

If you press the button, the cooling

operation will stop.

If you press the mode button during the

operation, the operation mode will be

changed in the order of cooling,

dry(dehumidification),heating,auto-operation

and fan operation.

Set the desired room temperature higher

than the current room temperature.

Setting temp range : 16 °C~30 °C (60 °F~86 °F)

- If the desired temperature is set lower

than the current room temperature, the

heating function will not begin.

TEMP

A click of the button will increase the

desired temperature by 1 °C or 2 °F.

A click of the button will decrease the

desired temperature by 1 °C or 2 °F.

OPER

MODE

TEMP

FAN

SPEED

OPER

MODE

NOTE

What is the three-minute delay function?

It will take time for the product to blow warm air. The delay is to protect the compressor.

The room will be heated with warm air after three minutes when the compressor begins oper-

ation.

* The cooling-only model will not do heating function.

OWNER'S INSTRUCTION

ENGLISH

Standard Operation - Auto Operation Mode

TEMP

FAN

SPEED

OPER

MODE

After operating the product by pressing

the button, set up the auto operation

by pressing the button.

“Auto Operation Mode”

For the products with the exclusive purpose

of cooling only, “AI” is indicated at the

temperature display section.

“Auto Change Over Mode” – Heat pump model only

When desired the set temperature is higher than the

room temperature during the auto operation

=> Heating operation

[For Heat pump models only]

When desired the set temperature is lower than the

room temperature during the auto operation

=> Cooling operation

- Setting temp range : 18 °C~30 °C (64 °F~86 °F)

OPER

MODE

When cold

When cool

When appropriate

When warm

When hot

OWNER'S INSTRUCTION

ENGLISH

Standard Operation - Dehumidiﬁcation Mode

It removes humidity while air-cooling weakly.

After operating the product by pressing

the button, set up the dry



button.

When the dry operation is selected, “dh”

will be shown on the display window as

shown on the left side.

- The temperature setting can not be

adjusted during operation this mode.



[ LOMEDHI ].

- The initial wind powerfulness of humidity

removal drive is ‘weak’.

OPER

MODE

FAN

SPEED

TEMP

FAN

SPEED

OPER

MODE

NOTE

• In rainy season or high humidity climate, it is possible to operate simultaneously dehumidi-

fier and cooling mode to remove humidity effectively.

• The menu item of wind powerfulness might not be partially selected according to the prod-

uct.

OWNER'S INSTRUCTION

ENGLISH

Standard Operation - Fan Mode

It blows the air as it is in the indoor, not the cold wind.

TEMP

FAN

SPEED

OPER

MODE

After operating the product by pressing

the button, set up the fan operation by

pressing the button.

When the dry operation is selected, “Fn”

will be shown on the display window as

shown on the left side.

- The temperature setting can not be

adjusted during operation this mode.

Press the button to select airflow rate

[ LOMEDHI ].

When running ventilation, compressor of

AHU doesn’t work.

OPER

MODE

FAN

SPEED

NOTE

• Ventilation drive does not release cool wind but general fan.

• Because it releases the wind that has no temperature difference from the room, it func-

tions to circulate the inside air.

• The menu item of wind powerfulness might not be partially selected according to the prod-

uct.

OWNER'S INSTRUCTION

ENGLISH

Function Setting - Fan Speed Selection

It blows the air as it is in the indoor, not the cold wind.

Select the proper fan speed which you want

by pressing the button on the remote

controller.

- If you press the button, the fan speed

will change in the order of [

LoMed

H i

- The initial fan speed is “Hi”.

- If the product is not compatible with the fan

speed Control, it will not function as per

your selection.

FAN

SPEED

Fan Speed Selection in Cooling Operation

Fan Speed Selection in Heating, Dry, Fan,

Auto-Operation

TEMP

FAN

SPEED

OPER

MODE

OWNER'S INSTRUCTION

ENGLISH

Function setting - Child Lock

It is the function to use preventing children or others from careless using.

TEMP

FAN

SPEED

OPER

MODE

During the operation, when pressing the

button and button for approx. 3 seconds,

the ‘Child Lock’ Function can be used.

At the time of initial setting of the ‘Child

Lock’, the ‘CL’ Will be indicated approx. 3

seconds at the temperature Display section

before resuming to the previous mode.

After the setting of the ‘CL’, if another button

is setup, the button can not be recognized as

the ‘CL’ is indicated at the temperature

display section for approx. 3 seconds.

If the ‘CL’ function is wanted to be used

under the operation standby state, press the

button and Button for approx.

3 seconds under the standby mode state

and the system will be the ‘CL’ state.

As for the releasing method, when pressing

the Button and button for approx.

3 seconds, the ‘CL’ function can be released.

FAN

SPEED

FAN

SPEED

FAN

SPEED

OWNER'S INSTRUCTION

ENGLISH

Function setting - Celsius / Fahrenheit Switching

This function is used for switching the display between Celsius and Fahrenheit.

(Optimized only for U.S.A)

TEMP

FAN

SPEED

OPER

MODE

When pressing the button and

button simultaneously for more than 3

seconds, the system will be entered into the

installer setting mode.

- After entering into the installer setting

mode, select the ceiling height setting code

value by pressing the oper-mode button.

* Celsius/Fahrenheit setting code value : 07

Select the desired setting value with the

temperature up(▲), down(▼) button.

When pressing button, currently

established celsius/Fahrenheit setting

value will be set up.

When pressing the button and

button simultaneously for more than 3

seconds after the setting has been

completed, the setting mode will be

released.

- If there isn’t any button input for more than

25 seconds, the installer setting mode will

also be released.

OPER

MODE

Code value

*Setting value

00:Celsius

01:Fahrenheit

OPER

MODE

Value

NOTE

• Whenever press temp up(▲), down(▼) button in Fahrenheit mode, the temperature will

increase/drop 2 degrees.

MAINTENANCE AND SERVICE

ENGLISH

Before performing any maintenance, turn off the main power to the system.

CAUTION

Grille, Case, and Remote

Control

- Turn the system off before cleaning. To

clean, wipe with a soft, dry cloth. Do not use

bleach or abrasives.

Air Filter

The air filters behind Indoor unit

(the suction side) should be checked and

cleaned once every 2 weeks or more often if

necessary.

1 Remove the Air filters.

- Take hold of the tab and pull slightly for-

ward to remove the filter.

2 Clean dirt from the air filter using a vacuum

cleaner or washing with water.

- If dirt is conspicuous, wash with a neutral

detergent in lukewarm water.

- If hot water (40 °C or more) is used, it

may be deformed.

3 After washing with water, dry well in the

shade.

- Do not expose the air filter to direct sun-

light or heat from a fire when drying it.

4. Install the air filter.

Never use any of the followings:

- Water hotter than 40 °C

Could cause deformation and/or discol-

oration.

- Volatile substances

Could damage the surfaces

of the air conditioner.

NOTE

Supply power must be disconnected

before cleaning the indoor unit.

Air outlet vent

Air ﬁlters

Air outlet vent

When the air filter is to be removed, do

not touch the metal parts of the indoor

unit. It may cause an injury.

CAUTION

MAINTENANCE AND SERVICE

TIPO: Conducto empotrado en el techo

MODELO : UB-H368GSS0 UB-H608RSS0

MANUAL DEL PROPIETARIO

Por favor lea este manual detenidamente antes de

utilizar su equipo y guárdelo para consultas futuras.

AIRE

ACONDICIONADO

Control remoto sencillo con cable

refrigeración

Modo de

calefacción

Modo de

deshumidificación

Modo de

Centígrados / Fahrenheit

Cambio

Rejilla, carcasa y control remoto

Filtro de aire

Cuando no funcione el aparato de aire

acondicionado

Cada función se mostrará en el panel

durante tres segundos o cuando se

encienda por primera vez.

Rango de ajuste de temperatura:

16 °C~30 °C (60 °F~86 °F)

- Si la temperatura se selecciona inferior

TEMP

OPER

MODE

TEMP

FAN

SPEED

OPER

MODE

* EI modo de sólo refrigeración no tiene la función de calor.

calefacción

Introduce viento caliente en la habitación

Si desea seleccionar el funcionamiento de

calor, pulse el botón . Y pulse el botón

Ajuste la temperatura deseada superior a la

temperatura actual de la habitación.

l hacer clic en el botón, aumentará

la temperatura deseada en 1ºC o 2ºF.

l hacer clic en el botón, bajará la

temperatura deseada en 1ºC o 2ºF.

a la temperatura actual de la habitación,

no se activará la función

de calor.

Si pulsa el botón , se detendrá el

funcionamiento derefrigeración.

NOTA

Qué es la función de re tardo de tres minutos?

Es el tiempo necesario para que el producto sople aire cálido.

El retardo protege el

compresor.La habitación se calentará con aire cálido después de tres minutos cuando

el compresor se ponga en funcionamiento.

Si pulsa el botón de modo durante el

funcionamiento, el modo de funcionamiento

cambiará en el orden refrigeración, seco

(deshumidificación), calor, funcionamiento

automático y ventilador.

“Cambio automático de modo” – Sólo modelo de

bomba de calor

Cuando la temperatura seleccionada es superior a la

temperatura interior durante el funcionamiento

automático => Funcionamiento de calefacción

[Sólo para modelos de bomba de calor]

NOTA

Debido a que la disribución de la temperatura del espacio de instalación del control remoto

no es uniforme, se pueden generar ligeras diferencias entre la temperatura real y la

indicación de temperatura del control remoto.

Cambio Centígrados / Fahrenheit

Esta función se utiliza para cambiar la pantalla entre Centígrados y Fahrenheit

Optimizado solo para EE.UU.

y el botón durante más de 3

segundos, el sistema entra en el modo de

ajustes de instalador

Tras acceder al modo de ajuste de

instalador,seleccione el valor del código de

ajuste de altura de techo pulsando el botón

de modo de operación.

Valor de código de ajuste Celsius/Fahrenheit: 07

Seleccione el valor de ajuste deseado con el

botón subir , bajar temperatura.

Valor de código

Valor

Valor de configuración

Centígrados

Fahrenheit

Al pulsar el botón , se configurará el

valor

centígrados/fahrenheit establecido

en ese mometo.

Cuando se pulsan al mismo tiempo el botón

y el botón durante más de 3

segundos tras haberse realizado el ajuste,

sale del modo de ajustes.

Si no se pulsa ningún botón durante más

de 25 segundos, también se sale del modo

de ajustes de instalador.

NOTA

Cuando se pulse el botón subir , bajar temperatura en modo Fahrenheit,

la temperatura subirá/bajará 2 grados.

LG UBNH368GSS0.ANWBLAR Manual de usuario

Marca: LG

Modelo: UBNH368GSS0.ANWBLAR

Categoría: Acondicionadores de aire móviles

Tipo: Manual de usuario

Este manual también es adecuado para

Descargar PDF

informe

En otros idiomas

English: LG UBNH368GSS0.ANWBLAR User manual

LG UBNH368GSS0.ANWBLAR Manual de usuario

Este manual también es adecuado para

LG UBNH368GSS0.ANWBLAR Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos