Yamaha RX-D485 El manual del propietario

Marca: Yamaha

Modelo: RX-D485

Categoría: Receptores AV

Tipo: El manual del propietario

Este manual también es adecuado para

RX-V485

AV Receiver

Owner's Manual

• This unit is a product for enjoying video and music at home.

• This manual explains preparations and operations for everyday users of the unit.

• Read the supplied booklet “Quick Start Guide” before using the unit.

CONTENTS

BEFORE USING THE UNIT 7

How to use this manual............................................................................ 7

How to use this manual......................................................................................................................................................... 7

Checking the accessories.......................................................................... 7

Checking the accessories...................................................................................................................................................... 7

Using the remote control......................................................................... 8

Insert the batteries in the remote control....................................................................................................................... 8

Operating range of the remote control........................................................................................................................... 8

FEATURES 9

What you can do with the unit................................................................. 9

Part names and functions...................................................................... 11

Part names and functions of the front panel............................................................................................................... 11

Part names and functions of the front display............................................................................................................ 13

Part names and functions of the rear panel................................................................................................................. 14

Part names and functions of the remote control....................................................................................................... 15

PREPARATIONS 16

1 Connecting speakers........................................................................ 16

Names and functions of speakers.................................................................................................................................... 16

Speaker systems and speakers to be connected....................................................................................................... 17

Speaker requirements.......................................................................................................................................................... 17

Setting the speaker impedance....................................................................................................................................... 18

Cable requirements.............................................................................................................................................................. 18

How to connect speakers................................................................................................................................................... 18

How to place speakers (speaker systems).................................................................................................................... 20

Connecting front speakers that support bi-amp connections............................................................................. 23

2 Connecting a TV................................................................................ 24

HDMI connection with a TV............................................................................................................................................... 24

VIDEO (composite video) connection with a TV........................................................................................................ 24

3 Connecting playback devices.......................................................... 25

HDMI connection with a video device such as a BD/DVD player......................................................................... 25

Connection other than HDMI with a playback device............................................................................................. 25

Connecting to the jack on the front panel................................................................................................................... 26

4 Connecting the radio antennas....................................................... 27

Connecting the FM/AM antennas (RX-V485)............................................................................................................... 27

Connecting the DAB/FM antenna (RX-D485).............................................................................................................. 28

5 Preparing for connecting to a network........................................... 29

Preparing for connecting to a network......................................................................................................................... 29

Connecting a network cable (wired connection)...................................................................................................... 29

Preparing wireless antennas (wireless connection).................................................................................................. 30

6 Plugging in the power cable............................................................ 30

Plugging in the power cable............................................................................................................................................. 30

7 Selecting the on-screen menu language........................................ 31

Selecting the on-screen menu language...................................................................................................................... 31

8 Configuring the necessary speaker settings.................................. 32

Assigning speaker configuration..................................................................................................................................... 32

Optimizing the speaker settings automatically (YPAO).......................................................................................... 33

Error messages from YPAO................................................................................................................................................ 35

Warning messages from YPAO......................................................................................................................................... 36

9 Setting MusicCast............................................................................. 37

What is MusicCast.................................................................................................................................................................. 37

Using MusicCast CONTROLLER......................................................................................................................................... 37

Adding the unit to the MusicCast network.................................................................................................................. 37

ENJOYING SOUND 38

Enjoying sound field effects.................................................................. 38

Select your favorite sound mode..................................................................................................................................... 38

Enjoying 3D sound fields (CINEMA DSP 3D)................................................................................................................ 38

Enjoying sound field effects optimized for the type of content........................................................................... 39

Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)............................................ 39

Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT).................................... 39

Enjoying surround sound with headphones (SILENT CINEMA)............................................................................ 39

Enjoying unprocessed playback............................................................ 40

Enjoying original sound (straight decode)................................................................................................................... 40

Enjoying multichannel playback without sound field effects (surround decoder)....................................... 40

Enjoying pure high fidelity sound (direct playback)................................................................................................. 41

Enjoying enhanced bass sound............................................................. 41

Enhancing the bass (Extra Bass)....................................................................................................................................... 41

Enjoying enhanced compressed music................................................. 42

Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)......... 42

Enjoying music in multiple rooms......................................................... 43

Playing back music in multiple rooms........................................................................................................................... 43

Connecting Zone B speakers............................................................................................................................................. 43

Operating the Zone B........................................................................................................................................................... 44

Correcting volume difference between Zone A and Zone B................................................................................. 45

Adjusting the volume for Zone B separately............................................................................................................... 45

PLAYBACK 46

Basic playback procedure...................................................................... 46

Basic procedure for playing back video and music................................................................................................... 46

Switching information on the front display................................................................................................................. 47

Item names and functions of the playback screen.................................................................................................... 48

Item names and functions of the browse screen....................................................................................................... 49

Listening to FM/AM radio (RX-V485)..................................................... 50

Setting the frequency steps............................................................................................................................................... 50

Selecting a frequency for reception............................................................................................................................... 51

Selecting a preset station................................................................................................................................................... 52

Registering radio stations automatically (Auto Preset)........................................................................................... 52

Registering a radio station manually.............................................................................................................................. 53

Clearing preset stations....................................................................................................................................................... 54

Displaying the Radio Data System information......................................................................................................... 54

Receiving traffic information automatically................................................................................................................ 55

Listening to DAB radio (RX-D485)......................................................... 56

Preparing the DAB tuning.................................................................................................................................................. 56

Selecting a DAB radio station for reception................................................................................................................. 57

Selecting a preset DAB radio station.............................................................................................................................. 57

Registering a DAB radio station as presets................................................................................................................... 58

Clearing preset DAB radio stations................................................................................................................................. 59

Displaying the DAB information...................................................................................................................................... 59

Checking reception strength of each DAB channel label....................................................................................... 60

Listening to FM radio (RX-D485)........................................................... 61

Selecting a frequency for FM radio reception............................................................................................................. 61

Selecting a preset FM radio station................................................................................................................................. 62

Registering FM radio stations automatically (Auto Preset).................................................................................... 62

Registering an FM radio station manually.................................................................................................................... 63

Clearing preset FM radio stations.................................................................................................................................... 64

Displaying the Radio Data System information......................................................................................................... 64

Playing back music stored on a Bluetooth® device.............................. 65

Playback Bluetooth® device music on the unit........................................................................................................... 65

Enjoying audio using Bluetooth® speakers/headphones....................................................................................... 66

Playing back music with AirPlay............................................................ 67

Playback of iTunes/iPhone music contents with AirPlay........................................................................................ 67

Playing back music stored on a USB storage device............................ 68

Playback of USB storage device contents..................................................................................................................... 68

Playing back music stored on media servers (PCs/NAS)...................... 69

Media sharing setup on media servers (PCs/NAS)..................................................................................................... 69

Playing back music stored on media servers (PCs/NAS)......................................................................................... 69

Listening to Internet radio..................................................................... 71

Selecting an Internet radio station.................................................................................................................................. 71

Registering favorite Internet radio stations................................................................................................................. 71

Listening to music streaming services.................................................. 72

Listening to a streaming service...................................................................................................................................... 72

Useful playback functions...................................................................... 73

SCENE function....................................................................................................................................................................... 73

Shortcut function................................................................................................................................................................... 75

Configuring playback settings for different playback sources

(Option menu)......................................................................................... 77

Basic operation of the Option menu.............................................................................................................................. 77

Option menu items............................................................................................................................................................... 78

Switching the input source................................................................................................................................................ 79

Adjusting the tone of the audio output........................................................................................................................ 79

Configuring DSP/Surround................................................................................................................................................ 79

Correcting volume differences during playback........................................................................................................ 82

Enabling Lipsync adjustment............................................................................................................................................ 82

Checking information about the video/audio signals............................................................................................. 83

Combining audio of another input source with video of the current input source...................................... 83

Selecting a video source to be output with the selected audio source............................................................ 84

Switching between stereo and monaural for FM radio reception...................................................................... 84

Setting presets for radio stations..................................................................................................................................... 85

Receiving traffic information automatically................................................................................................................ 86

Configuring the shuffle setting........................................................................................................................................ 86

Configuring the repeat setting......................................................................................................................................... 87

Enabling volume control via AirPlay............................................................................................................................... 87

Adding an Internet radio station to the “Favorites” folder..................................................................................... 87

Removing an Internet radio station from the “Favorites” folder.......................................................................... 87

Performing an initial scan for DAB radio reception................................................................................................... 88

Checking reception strength of each DAB channel label....................................................................................... 88

CONFIGURATIONS 89

Configuring various functions (Setup menu)....................................... 89

Basic operation of the Setup menu................................................................................................................................ 89

Setup menu items................................................................................................................................................................. 90

Configuring the speaker settings.......................................................... 93

Setting your speaker system............................................................................................................................................. 93

Setting the use of a subwoofer......................................................................................................................................... 93

Setting the size of the front speakers............................................................................................................................. 94

Setting the use of a center speaker and its size.......................................................................................................... 94

Setting the use of surround speakers and their size................................................................................................. 95

Setting the crossover frequency of the low-frequency components................................................................. 95

Setting the phase of the subwoofer............................................................................................................................... 96

Setting the use of Extra Bass.............................................................................................................................................. 96

Setting the use of Virtual CINEMA FRONT.................................................................................................................... 96

Setting the distance between each speaker and the listening position........................................................... 96

Adjusting the volume of each speaker.......................................................................................................................... 97

Setting the equalizer............................................................................................................................................................ 97

Outputting test tones.......................................................................................................................................................... 98

Configuring the HDMI settings.............................................................. 99

Setting the use of HDMI Control...................................................................................................................................... 99

Setting the output of HDMI audio from the TV speaker......................................................................................... 99

Setting the use of HDMI Standby Through.................................................................................................................. 99

Setting the use of 4K upscaling of the HDMI video signal...................................................................................... 99

Setting the version of HDCP used on the HDMI input jacks................................................................................ 100

Setting the audio jack used for TV audio input........................................................................................................ 100

Linking the standby modes of the unit and the TV................................................................................................ 100

Setting the use of ARC....................................................................................................................................................... 100

Setting the use of SCENE link playback....................................................................................................................... 101

Configuring the sound settings........................................................... 102

Setting the broadening effect of the front sound field......................................................................................... 102

Adjusting the broadening effect of the center sound field................................................................................. 102

Adjusting the difference in level between the front and surround sound fields........................................ 102

Adjusting the center localization (broadening effect) of the front sound field........................................... 102

Setting the use of Monaural Mix.................................................................................................................................... 103

Setting the adjustment method of the Lipsync function..................................................................................... 103

Adjusting the delay of the Lipsync function............................................................................................................. 103

Adjusting the volume of dialogue sound.................................................................................................................. 103

Setting the scale of the volume display...................................................................................................................... 104

Setting the dynamic range adjustment method..................................................................................................... 104

Setting the limit value of the volume.......................................................................................................................... 104

Setting the initial volume for when the unit is turned on.................................................................................... 104

Adjusting the volume for Zone B in conjunction with the volume for Zone A............................................ 105

Configuring the power supply settings.............................................. 106

Setting the amount of time for the auto-standby function................................................................................. 106

Setting the use of the eco mode................................................................................................................................... 106

Configuring the function settings....................................................... 107

Automatically changing the input source names displayed on the front display...................................... 107

Manually changing the input source names displayed on the front display................................................ 107

Setting input sources to be skipped when operating the INPUT key.............................................................. 108

Adjusting the brightness of the front display........................................................................................................... 108

Preventing accidental changes to the settings........................................................................................................ 108

Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.................. 109

Configuring the network settings....................................................... 110

Checking the network information of the unit........................................................................................................ 110

Setting the network connection method (Wired/Wireless)................................................................................ 110

Setting the network parameters automatically (DHCP)........................................................................................ 110

Setting the network parameters manually................................................................................................................ 111

Setting the MAC address filter........................................................................................................................................ 111

Setting the use of a Digital Media Controller............................................................................................................ 112

Setting the use of the Network Standby function.................................................................................................. 112

Setting the network name of the unit......................................................................................................................... 113

Setting the power interlock from the unit to MusicCast compatible devices.............................................. 113

Updating the firmware via the network..................................................................................................................... 113

Configuring the Bluetooth® settings.................................................. 114

Setting the use of Bluetooth®......................................................................................................................................... 114

Terminating the connection between a Bluetooth® device and the unit...................................................... 114

Setting the use of the Bluetooth® Standby function.............................................................................................. 114

Setting the use of audio transmission to a Bluetooth® device........................................................................... 115

Connecting the unit to a Bluetooth® device that receives transmitted audio............................................. 115

Configuring the language settings..................................................... 116

Setting the on-screen menu language....................................................................................................................... 116

Configuring the advanced settings (ADVANCED SETUP menu)....... 117

Basic operation of the ADVANCED SETUP menu..................................................................................................... 117

ADVANCED SETUP menu items..................................................................................................................................... 117

Changing the speaker impedance setting (SP IMP.).............................................................................................. 118

Selecting the remote control ID (REMOTE ID).......................................................................................................... 118

Changing the FM/AM tuning frequency setting (TU)............................................................................................ 118

Switching the video signal type (TV FORMAT)......................................................................................................... 118

Selecting the HDMI 4K signal format (4K MODE).................................................................................................... 119

Backuping and restoring all the settings (BKUP/RSTR)......................................................................................... 119

Restoring the default settings (INIT)............................................................................................................................. 120

Updating the firmware (UPDATE)................................................................................................................................. 120

Checking the firmware version (VERSION)................................................................................................................. 120

TROUBLESHOOTING 121

When any problem appears................................................................. 121

If trouble occurs, first check the following:................................................................................................................ 121

Power, system, or remote control trouble................................................................................................................. 121

Audio trouble....................................................................................................................................................................... 123

Video trouble........................................................................................................................................................................ 126

FM/AM radio trouble (AM radio feature is available only on RX-V485)........................................................... 127

DAB radio trouble (RX-D485).......................................................................................................................................... 127

USB trouble........................................................................................................................................................................... 128

Network trouble.................................................................................................................................................................. 129

Bluetooth® trouble.............................................................................................................................................................. 131

Error indications on the front display................................................. 132

Error indications on the front display.......................................................................................................................... 132

APPENDIX 134

Updating the unit’s firmware via the network................................... 134

Firmware updates............................................................................................................................................................... 134

Updating the unit’s firmware via the network......................................................................................................... 135

Using wireless surround speakers (MusicCast Surround function)

................................................................................................................ 136

Using wireless surround speakers (MusicCast Surround function)................................................................... 136

Connecting to a network wirelessly.................................................... 138

Selecting a wireless network connection method.................................................................................................. 138

Setting up a wireless connection using the WPS button..................................................................................... 139

Setting up a wireless connection using an iOS device.......................................................................................... 139

Setting up a wireless connection by selecting from the list of available access points............................ 140

Setting up a wireless connection manually............................................................................................................... 141

Setting up a wireless connection by using the WPS PIN code........................................................................... 142

Input/output jacks and cables............................................................. 143

Video/audio jacks................................................................................................................................................................ 143

Video jacks............................................................................................................................................................................. 143

Audio jacks............................................................................................................................................................................ 143

Glossary................................................................................................. 144

Glossary of audio information........................................................................................................................................ 144

Glossary of HDMI and video information................................................................................................................... 145

Glossary of network information................................................................................................................................... 145

Glossary of Yamaha technologies................................................................................................................................. 145

Supported devices and file formats.................................................... 146

Supported Bluetooth® devices....................................................................................................................................... 146

Supported USB devices..................................................................................................................................................... 146

Supported AirPlay devices............................................................................................................................................... 146

Supported file formats...................................................................................................................................................... 147

Video signal flow.................................................................................. 147

Video signal flow................................................................................................................................................................. 147

Additional information on HDMI......................................................... 148

HDMI Control and synchronized operations............................................................................................................ 148

Audio Return Channel (ARC)........................................................................................................................................... 149

HDMI signal compatibility............................................................................................................................................... 150

Trademarks........................................................................................... 151

Trademarks............................................................................................................................................................................ 151

Specifications........................................................................................ 152

Specifications........................................................................................................................................................................ 152

Default settings.................................................................................... 157

Default settings of the Option menu........................................................................................................................... 157

Default settings of the Setup menu............................................................................................................................. 157

Default settings of the ADVANCED SETUP menu.................................................................................................... 158

BEFORE USING THE UNIT

How to use this manual

When reading this manual, mind the following items.

• The illustrations of the main unit used in this manual are of the RX-V485 (U.S.A.

model), unless otherwise specified.

• Some features are not available in certain regions.

• Due to product improvements, specifications and appearance are subject to

change without notice.

• This manual mainly explains operations using the menu displayed on the TV screen.

Operations with the TV screen menu are only available when your TV is connected

to the unit via HDMI.

• This manual explains operations using the supplied remote control.

• This manual describes all the “iPod touch”, “iPhone” and “iPad” as the “iPhone”.

“iPhone” refers to “iPod touch”, “iPhone” and “iPad”, unless otherwise specified.

WARNING:

Indicates precautions for the possibility of death or serious injury.

CAUTION:

Indicates precautions for the possibility of minor or moderate injury.

NOTICE:

Indicates precautions for use to avoid the possibility of malfunction/damage to the unit.

NOTE:

Indicates instructions and supplementary explanations for optimum use.

Checking the accessories

Check that the following accessories are supplied with the product.

£ AM antenna (RX-V485) £ FM antenna (RX-V485)

* One of the above is supplied depending on

the region of purchase.

£ DAB/FM antenna (

RX-D485) £ YPAO microphone

£ Remote control

£ Batteries (AAA, R03, UM-4) (x2)

£ Quick Start Guide

NOTE

Access the Yamaha Downloads site to download the latest Owner's Manual and Quick Start Guide.

http://download.yamaha.com/

Using the remote control

Insert the batteries in the remote control

Insert the batteries the right way round.

Operating range of the remote control

Point the remote control at the remote control sensor on the unit and remain within the

operating range shown in the following figure.

Within 6 m (20 ft)

30° 30°

FEATURES

What you can do with the unit

Supporting 2- to 5.1-channel

speaker system

According to the number of speakers that you are

using, you can enjoy your favorite acoustic spaces in

various styles.

• “Using 5.1-channel system” (p.20)

• “Using 3.1-channel system” (p.21)

• “Using Virtual CINEMA FRONT” (p.22)

• “Playing back music in multiple rooms” (p.43)

Automatically optimizing the

speaker settings (YPAO)

YPAO function detects speaker connections, measures

the distances from them to your listening position by

using YPAO microphone measurement, and then

automatically optimizes the speaker settings, such as

volume balance and acoustic parameters, to suit your

room (YPAO: Yamaha Parametric room Acoustic

Optimizer).

• “Optimizing the speaker settings automatically

(YPAO)” (p.33)

Enjoying sound field effects with

much presence

The unit is equipped with a variety of sound programs

and surround decoders that allow you to enjoy

playback sources with your favorite sound mode (such

as sound field effect or stereo playback).

• “Enjoying 3D sound fields (CINEMA DSP

3D)” (p.38)

• “Enjoying sound field effects optimized for the type of

content”

(p.

39)

• “Enjoying sound field effects without surround

speakers (Virtual CINEMA DSP)” (p.39)

• “Enjoying surround sound with headphones (SILENT

CINEMA)” (p.39)

• “Enjoying original sound (straight decode)” (p.40)

• “Enjoying multichannel playback without sound field

effects (surround decoder)”

(p.

40)

• “Enjoying pure high fidelity sound (direct

playback)” (p.41)

• “Enhancing the bass (Extra Bass)” (p.41)

• “Playing back digitally compressed formats with

enriched sound (Compressed Music

Enhancer)”

(p.

42)

Wide variety of supported

content via network

When the unit is connected to a network, you can enjoy

the various kinds of content via network on the unit.

• “Playback of iTunes/iPhone music contents with

AirPlay” (p.67)

• “Playing back music stored on media servers (PCs/

NAS)” (p.69)

• “Selecting an Internet radio station” (p.71)

• “Listening to a streaming service” (p.72)

Playing back content of various

devices

A number of HDMI jacks and various input/output jacks

on the unit allow you to connect video devices (such as

BD/DVD players), audio devices (such as CD players),

Bluetooth devices (such as smartphones), game

consoles, USB storage devices, and other devices. You

can play back content of them.

• “Selecting a frequency for reception” (p.51)

• “Playback Bluetooth

device music on the

unit”

(p.65)

• “Playback of USB storage device contents” (p.68)

Useful functions

The unit is equipped with the various useful functions.

The SCENE function allows you to select the input

source and settings registered to the corresponding

scene, such as sound program and Compressed

Music Enhancer on/off, with just one touch. When the

unit is connected to an HDMI Control-compatible TV

with an HDMI cable, you can control the unit (such as

power and volume) with TV remote control operations.

• “Selecting the input source and favorite settings with

one touch (SCENE)”

(p.

73)

•

“Registering a favorite content as shortcut” (p.75)

• “HDMI Control and synchronized

operations”

(p.148

)

• “Audio Return Channel (ARC)” (p.149)

Additional Features

The unit is equipped with the function connected with

speakers wirelessly. You can enjoy audio played back

on the unit using Bluetooth speakers/headphones.

Also, using devices that support the MusicCast

Surround function, the surround speakers and

subwoofer can be wireless.

• “Enjoying audio using Bluetooth

speakers/

headphones” (p.66)

• “Using wireless surround speakers (MusicCast

Surround function)” (p.136

)

Useful applications

Application: “AV SETUP GUIDE”

AV SETUP GUIDE is an application that assists

you with cable connections between AV Receiver

and playback devices as well as AV Receiver

setup. This app guides you through the various

settings such as speaker connections, TV and

playback device connections and selecting the

speaker system.

For details, search for “AV SETUP GUIDE” on the App

Store or Google Play.

Application: “AV CONTROLLER”

AV CONTROLLER is an application that assists

you with various operations of AV Receiver

without the remote control. This app allows you

not only to control the unit’s power and volume

but also to select the input source and start/stop

playback.

For details, search for “AV CONTROLLER” on the App

Store or Google Play.

Application: "MusicCast

CONTROLLER"

MusicCast CONTROLLER is an application that

allows you to link a MusicCast compatible device

to other MusicCast compatible devices in other

rooms and play them back simultaneously. This

app lets you use your smartphone or other mobile

device instead of the remote control to easily

select music to play back as well as configure the

unit and MusicCast compatible devices.

For details, search for “MusicCast CONTROLLER” on

the App Store or Google Play.

Part names and functions

Part names and functions of the front panel

The part names and functions of the front panel are as follows.

PROGRAM

TONE CONTROL

STRAIGHT

(CONNECT)

AUX USB

AUDIO

5V 1A

SCENE

INPUT

PHONES

SILENT CINEMA

YPAO MIC

MEMORY

INFO (WPS)

PRESET

FM AM TUNING

DIRECT

VOLUME

DVD

NET

RADIO

3 4 6 7 8

51 09

B C D E F H I JG

(RX-V485 U.S.A. model)

z (power) key

Turns on/off (standby) the unit.

Standby indicator

Lights up when the unit is in standby mode under any of

the following conditions.

• HDMI Control is enabled (p.99)

• Standby Through is enabled (p.99)

• Network Standby is enabled (p.112)

• Bluetooth Standby is enabled (p.114)

YPAO MIC jack

For connecting the supplied YPAO microphone (p.33).

Remote control sensor

Receives remote control signals (p.8).

INFO (WPS) key

Selects the information displayed on the front display

(p.47).

Enters the wireless LAN connection setup (WPS button

configuration) by holding down for a few seconds (

p.139).

MEMORY

key

Registers radio stations as preset stations (p.52).

Registers Bluetooth, USB, or network content as a shortcut

by holding down for a few seconds (p.

PRESET keys

Select a preset radio station (p.52).

Recall Bluetooth, USB, or network content that is registered

as a shortcut (

76).

FM and AM keys (RX-V485) or FM and DAB keys (RX-

D485)

Switch between FM and AM (p.51) or FM and DAB

(p.57).

TUNING keys

Select the radio frequency (p.51).

Front display

Displays information (p.13).

DIRECT key

Enables/disables the direct playback mode (p.41).

PHONES jack

For connecting headphones.

INPUT keys

Select an input source.

TONE CONTROL key

Adjusts the level of high-frequency range (Treble) and low-

frequency range (Bass

) individually (p.79).

SCENE keys

Switch with one touch between multiple settings set using

the SCENE function. Also, turns on the unit when it is in

standby mode (p.73

PROGRAM keys

Select a sound program or a surround decoder (p.38).

STRAIGHT (CONNECT) key

Enables/disables the straight decode mode (p.40).

Enters the MusicCast network addition and the wireless

LAN setup by holding down for 5 seconds (p.

AUX jack

For connecting devices, such as portable audio players

(p.26).

USB jack

For connecting a USB storage device (p.68).

VOLUME knob

Adjusts the volume.

Part names and functions of the front display

The part names and functions of the front display are as follows.

YPAO

VOL.

PARTY

FPR

SBL SB SBR

FPL

ENHANCER

ECO

OUT

DRC

SLEEP

STEREO

TUNED

VOL.

MUTE VIRTUAL

ZONE

LINK

MASTER

1 5 7

9342 0 A6

CB CFED G

HDMI

Lights up when HDMI signals are being input or output.

OUT

Lights up when HDMI signals are being output.

LINK MASTER

Lights up when the unit is the master device of the

MusicCast network.

Firmware update indicator

Lights up when a firmware update is available via the

network.

Bluetooth indicator

Light up while the unit is connected to a Bluetooth device.

CINEMA DSP

Lights up when CINEMA DSP 3D (p.38) is working.

SLEEP

Lights up when the sleep timer is on.

STEREO

Lights up when the unit is receiving a stereo FM radio

signal.

TUNED

Lights up when the unit is receiving an FM/AM radio station

(RX-V485) or FM radio station (RX-D485

) signal.

ZONE indicators

Indicate the zone to which the sound is output (p.45).

A-DRC

Lights up when Adaptive DRC (

p.81) is working.

Volume indicator

Indicates the current volume.

VIRTUAL

Lights up when the virtual processing (p.39) is working.

ECO

Lights up when the eco mode (p.106) is enabled.

Cursor indicators

Indicate the remote control cursor keys currently

operational.

Information display

Displays the current status (such as input name and sound

mode name). You can switch the information by pressing

INFO (p.

Wireless LAN indicator

Light up while the unit is connected to a wireless network

(p.138).

NOTE

This indicator may light up when the unit is added to the

MusicCast network. For details, see “Adding the unit to the

MusicCast network” (p.37).

ENHANCER

Lights up when Compressed Music Enhancer (

p.42) is

working.

Speaker indicators

Indicate speaker terminals from which signals are output.

A Front speaker (L)

S Front speaker (R)

D Center speaker

F Surround speaker (L)

G Surround speaker (R)

L Subwoofer

MUTE

Blinks when audio is temporarily muted.

Part names and functions of the rear panel

The part names and functions of the rear panel are as follows.

c e

g h

(RX-V485 U.S.A. model)

▪ The area around the video/audio output jacks is marked in white

on the actual product to prevent improper connections.

Wireless antennas

For a wireless (Wi-Fi) connection to a network (p.138) and

a Bluetooth connection (p.65).

HDMI OUT

jack

For connecting to an HDMI-compatible TV and outputting

video/audio signals (p.

24). When using ARC, TV audio

signal can also be input through the HDMI OUT jack.

HDMI 1–4 jacks

For connecting to HDMI-compatible playback devices and

inputting video/audio signals (p.25).

ANTENNA

jacks

For connecting to the radio antennas (p.27).

NETWORK jack

For a wired connection to a network (p.29).

Power cable

For connecting to an AC wall outlet (p.30).

AV jacks

AUDIO jacks

For connecting to video/audio playback devices and

inputting video/audio signals (

p.25).

MONITOR OUT jack

For connecting to a TV and outputting video signals

(p.24).

SUBWOOFER PRE OUT jack

For connecting to a subwoofer (with built-in amplifier)

(p.19).

SPEAKERS terminals

For connecting to speakers (p.16).

VOLTAGE SELECTOR

(Taiwan, Brazil and Central and South America models

only)

Selects the switch position according to your local voltage

(p.30).

Part names and functions of the remote control

The part names and functions of the supplied remote control are as follows.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGRAM

USB

STRAIGHT

ENHANCER

BASS

INPU T

DVD

S C ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NE T

NET

BLUETOOTH

(RX-V485)

Remote control signal transmitter

Transmits infrared signals.

z (receiver power) key

Turns on/off (standby) the unit.

SLEEP key

Pressing this key repeatedly will specify the time (120 min,

90 min, 60 min, 30 min, off), in which the unit switches to

the standby mode.

ZONE switch

Changes the zone that is controlled by the remote control

(p.

SCENE keys

Switch with one touch between multiple settings set using

the SCENE function. Also, turn on the unit when it is in

standby mode (p.73

Sound mode keys

Select a sound mode (p.38).

Input selection keys

Select an input source for playback.

NOTE

Presses NET repeatedly to select a desired network source.

SETUP key

Displays the setup menu (p.89).

Menu operation keys

Operates the menu.

9:ABC External device operation keys

Let you perform playback operations when “USB” or “NET”

is selected as the input source, or control playback of the

HDMI Control-compatible playback device.

NOTE

▪ The playback devices must support HDMI Control. Some

HDMI Control-compatible devices cannot be used.

▪ You can assign the unit's functions to the RED/GREEN/

YELLOW/BLUE keys (p.109).

Playback operation keys

Controls playback of the external device.

VOLUME keys

Adjust the volume.

MUTE key

Mutes the audio output.

OPTION key

Displays the option menu (p.77).

DISPLAY key

Turns on/off the browse screen, playback screen, etc.

PREPARATIONS

1 Connecting speakers

Names and functions of speakers

The names and functions of speakers connected to the unit are as follows.

10° to 30° 10° to 30°

NOTE

Use this diagram as a reference for the ideal speaker layout for the unit. Your speaker layout does not need

to match the diagram exactly, since the YPAO function can be used to automatically optimize the speaker

settings (such as distances) to suit the actual speaker layout.

Speaker type Abbr. Function

Front (L/R)

1/2

Produce front channel sounds (stereo sounds).

Center

Produces center channel sounds (such as movie dialogue

and vocals).

Surround (L/R)

4/5

Produce surround channel sounds.

Subwoofer

Produces LFE (low-frequency effect) channel sounds and

reinforces the bass parts of other channels.

Speaker systems and speakers to be connected

Select the speaker layout for the number of speakers that you are using and place the

speakers and subwoofer in your room.

Speaker type

Speaker system

(the number of channels)

5.1 3.1 2.1

Front (L/R) 1/2

  

Center 3

 

Surround (L/R) 4/5



Subwoofer 9

  

Speaker requirements

Speakers and subwoofers to be connected to the unit must meet the following

requirements:

• (U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm speakers. When

connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For

details, see the following:

– “Setting the speaker impedance” (p.18)

• (Except for U.S.A. and Canada models)

Use speakers with an impedance of at least 6 Ω.

• Use a subwoofer with built-in amplifier.

NOTE

▪ Prepare the number of speakers according to your speaker system.

▪ Be sure to connect the front left and right speakers.

Setting the speaker impedance

(U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm speakers. When connecting

6-ohm speakers, set the speaker impedance to “6 Ω MIN”.

Before connecting speakers, connect the power cable to an AC

wall outlet.

While holding down STRAIGHT on the front panel, press z

(power).

(power)

STRAIGHT

Check that “SP IMP.” is displayed on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

SP IMP.••8¬MIN

Press STRAIGHT to select “6 Ω MIN”.

Press z (power) to set the unit to standby mode and remove the

power cable from the AC wall outlet.

You are now ready to connect the speakers.

Cable requirements

Use the following types of commercially-available cables to connect speakers to the

unit:

Speaker cables (the number of speakers

required)

Audio pin cable (for connecting a subwoofer)

–

How to connect speakers

Connecting the speaker

Connect a speaker cable between the negative (–) terminal of the unit and the

negative (–) terminal of the speaker, and between the positive (+) terminal of the unit

and the positive (+) unit of the speaker.

NOTICE

When connecting the speaker cables, take notice of the following:

▪ Prepare speaker cables in a place away from the unit, to avoid accidentally dropping wire strands into

the unit's interior which could result in a short circuit or malfunction of the unit.

▪ Improper connecting of the speaker cables may cause a short circuit and also damage the unit or the

speakers.

– Twist the bare wires of the speaker cables firmly together.

– Do not let the bare wires of the speaker cable touch one another.

– Do not let the bare wires of the speaker cable come into contact with the unit’s metal parts (rear panel

and screws).

NOTE

▪ Remove the unit’s power cable from an AC wall outlet before connecting the speakers.

▪ Be sure to connect the front left and right speakers.

▪ (U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers,

set the unit’s speaker impedance to “6

Ω MIN”. For details, see the following:

–

“Setting the speaker impedance” (p.18)

Remove approximately 10 mm (3/8”) of insulation from the ends of

the speaker cable, and twist the bare wires of the cable firmly

together.

Loosen the speaker terminal.

Insert the bare wires of the cable into the gap on the side (upper

right or bottom left) of the terminal.

Tighten the terminal.

FRONT

+ (red)

- (black)

This completes the connection.

NOTE

▪ If “Check SP Wires” appears on the front display when the unit is turned on, turn off the unit, and then

confirm that the speaker cables are not short circuited.

▪ (U.S.A., Canada, China, Taiwan, Brazil, Central and South America and General models only)

When using a banana plug, tighten the speaker terminal and insert a banana plug into the end of the

terminal.

FRONT

Banana plug

Connecting the subwoofer

Use an audio pin cable to connect the subwoofer.

NOTE

Unplug the power cables of the unit and subwoofer from the AC wall outlets before connecting the

subwoofer.

AUDIO 3

Audio pin cable

How to place speakers (speaker systems)

Using 5.1-channel system

This is a basic speaker layout recommended for enjoying surround sound.

10° to 30° 10° to 30°

Using 3.1-channel system

This is a speaker layout recommended for enjoying stereo sound with a center

speaker. Center channel sound such as movie dialogue and vocals can be clearly

obtained.

Using Virtual CINEMA FRONT

This speaker layout is recommended if you cannot place speakers in the back of the

room.

NOTE

To use Virtual CINEMA FRONT, the speaker configuration settings must be changed. For details, see the

following:

▪ “Assigning speaker configuration” (p.32)

▪ “Setting the use of Virtual CINEMA FRONT” (p.96)

Connecting front speakers that support bi-amp

connections

You can connect the front speakers that support bi-amp connections.

To enable the bi-amp function, configure the necessary speaker settings. For details,

see the following:

• “Assigning speaker configuration” (p.32)

• “Setting your speaker system” (p.93)

NOTICE

▪ Before making bi-amp connections, remove any brackets or cables that connect a woofer with a

tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp

connections, make sure that the brackets or cables are connected before connecting the speaker

cables.

1 2

The unit (rear)

NOTE

▪ The following speakers cannot be connected simultaneously.

– Surround speakers

– Zone B speakers

– Bi-amp speakers

▪ The FRONT terminals and SURROUND/BI-AMP/ZONE B terminals output the same signals.

2 Connecting a TV

HDMI connection with a TV

Connect a TV to the unit with an HDMI cable. If you connect a TV that supports ARC to

the unit, you can output video/audio to the TV or input TV audio to the unit.

HDMI

(ARC)

The unit (rear) HDMI OUT jack

HDMI input

About Audio Return Channel (ARC)

▪ ARC allows audio signals to travel both ways with a single HDMI cable. To use ARC, connect to the TV

using an HDMI cable that supports ARC.

NOTE

▪ If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s

power and volume with the TV’s remote control.

▪ To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the

settings, see the following:

– “HDMI Control and synchronized operations” (p.148)

– “Audio Return Channel (ARC)” (p.149)

▪ If your TV does not support Audio Return Channel (ARC), a digital optical cable connection between the

TV and the unit is needed.

VIDEO (composite video) connection with a TV

Connect a TV to the unit with a video pin cable and a digital optical cable.

VIDEO

OPTICAL

O O

MONITOR OUT

The unit (rear)

AUDIO 1 (OPTICAL) jack

MONITOR OUT (VIDEO) jack

Video input

(composite video)

Audio output

(digital optical)

NOTE

▪ If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be

output to the TV. For details, see the following:

– “Video signal flow” (p.147)

▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI.

▪ A digital optical cable connection allows audio from the TV to be played back on the unit. A digital optical

cable connection is not needed in the following case:

– If you will receive TV broadcasts only from the set-top box

3 Connecting playback devices

HDMI connection with a video device such as a

BD/DVD player

Connect a video device to the unit with an HDMI cable.

HDMI

The unit (rear)

HDMI OUT jack

HDMI 1–4 jacks

Video device

NOTE

To watch video input to the HDMI 1–4 jacks, you need to connect your TV to the HDMI OUT jack of the unit.

For details, see the following:

▪ “HDMI connection with a TV” (p.24)

Connection other than HDMI with a playback device

VIDEO (composite video) connection with a video

device

Connect a video device to the unit with a video pin cable and an audio cable (digital

coaxial or stereo pin cable). Choose a set of input jacks (on the unit) depending on the

audio output jacks available on your video device.

Output jacks on video device

Input jacks on the unit

Video Audio

Composite video

Digital coaxial AV 1 (VIDEO + COAXIAL)

Analog stereo AV 2–3 (VIDEO + AUDIO)

Digital optical

You need to change the combination

of video/audio input jacks (p.83).

COAXIAL

VIDEO

AV 1

C C

The unit (rear)

AV 1 (COAXIAL) jack or AV 2–3

(AUDIO) jacks

AV 1–3 (VIDEO) jacks

Video output

(composite video)

Audio output

(digital coaxial or analog

stereo)

Video device

NOTE

▪ If you connect a video device to the unit via composite video connection, you need to connect your TV to

the MONITOR OUT (VIDEO) jack of the unit. For details, see the following:

– “VIDEO (composite video) connection with a TV” (p.24)

▪ If the combination of video/audio input jacks available on the unit does not match your video device,

change its combination according to the output jacks of your device. For details, see the following:

– “Combining audio of another input source with video of the current input source” (p.83)

AUDIO connection with an audio device such as a CD

player

Connect audio devices such as CD players and MD players to the unit. Depending on

the audio output jacks available on your audio device, choose one of the following

connections.

NOTE

To use a turntable, a commercially-available phono equalizer amplifier is required. Connect the output of the

phono equalizer amplifier to the unit.

Audio output jacks on audio device Audio input jacks on the unit

Digital optical AUDIO 1 (OPTICAL)

Digital coaxial

AUDIO 2 (COAXIAL)

AV 1 (COAXIAL)

Analog stereo

AUDIO 3 (AUDIO)

AV 2–3 (AUDIO)

COAXIAL

OPTICAL

C C

O O

The unit (rear)

AV 1–3 jacks

AUDIO 1–3 jacks

Audio output

(either digital optical, digital coaxial,

or analog stereo)

Audio device

NOTE

“AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 1

jacks, use “TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the SCENE

function, you also need to change the input assignment for SCENE (TV). For details, see the following:

▪ “Setting the audio jack used for TV audio input” (p.100)

▪ “Registering a scene” (p.74)

Connecting to the jack on the front panel

Use the AUX jack on the front panel to temporarily connect devices such as portable

audio players to the unit.

CAUTION

▪ Before making a connection, stop playback on the device and turn down the volume on the unit. The

volume may be unexpectedly loud, and this could result in damage to hearing.

NOTE

You need to prepare the audio cable that matches the output jacks on your device.

PROGRAM

TONE CONTROL

STRAIGHT

(CONNECT)

AUX USB

AUDIO

5V 1A

INPUT

DVD

NET

RADIO

The unit (front)

Portable audio player

If you select “AUX” as the input source by pressing INPUT, the audio played back on

the device will be output from the unit.

4 Connecting the radio antennas

Connecting the FM/AM antennas (RX-V485)

Connect the supplied FM/AM antennas to the unit.

Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.

The unit (rear)

FM antenna

AM antenna

Assembling and connecting the AM antenna

ReleaseHold down Insert

NOTE

▪ Unwind only the length of cable needed from the AM antenna unit.

▪ The wires of the AM antenna have no polarity.

Connecting the DAB/FM antenna (RX-D485)

Connect the supplied DAB/FM antenna to the unit and fix the antenna ends to a wall.

The unit (rear)

DAB/FM antenna

NOTE

▪ The antenna should be stretched out horizontally.

▪ If you cannot obtain good reception on the radio, adjust the height, direction or placement of the DAB/FM

antenna.

5 Preparing for connecting to a network

Preparing for connecting to a network

The unit supports wired and wireless connections. Select a connection method

according to your network environment.

If you are using a router that supports DHCP in the wired connection, you do not need

to configure any network settings for the unit.

NOTE

You need to configure the network settings if your router does not support DHCP or if you want to configure

the network parameters manually. For details, see the following:

▪ “Setting the network parameters manually” (p.111)

To connect the unit to a wireless network, select one of the following methods to

configure the wireless network settings.

l Method using the MusicCast setting

When adding the unit to the MusicCast network, you can also configure the unit’s

wireless network settings at once. If you use MusicCast CONTROLLER, we

recommend the wireless connection to MusicCast network. For details, see the

following:

– “Adding the unit to the MusicCast network” (p.37)

l Other methods

For details, see the following:

– “Selecting a wireless network connection method” (p.138)

Connecting a network cable (wired connection)

Connect the unit to your router with a commercially-available STP network cable

(CAT-5 or higher straight cable).

You can enjoy Internet radio or music files stored on media servers, such as PCs and

Network Attached Storage (NAS), on the unit.

LAN

WAN

Network Attached Storage

(NAS)

Internet

Modem

Wireless

router

Network cable

The unit (rear)

NOTE

▪ If you are using a router that supports DHCP, you do not need to configure any network settings for the

unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only

need to configure the network settings if your router does not support DHCP or if you want to configure the

network parameters manually. For details, see the following:

– “Setting the network parameters manually” (p.111)

▪ You can check whether the network parameters (such as IP address) are properly assigned to the unit.

For details, see the following:

– “Checking the network information of the unit” (p.110)

Preparing wireless antennas (wireless connection)

Stand the wireless antennas upright for connecting to the wireless network or a

Bluetooth device wirelessly.

For information on how to connect the unit to a wireless network, see the following:

• “Preparing for connecting to a network” (p.29)

NOTICE

▪ Do not apply excessive force on the wireless antenna. Doing so may damage the antenna.

6 Plugging in the power cable

Plugging in the power cable

WARNING

(Taiwan, Brazil and Central and South America models only)

Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall

outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential

fire hazard.

Before plugging in the power cable

Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–

120/220–240 V, 50/60 Hz.

The unit (rear)

VOLTAGE SELECTOR

After all the connections are complete, plug in the power cable.

The unit (rear)

To an AC wall outlet

7 Selecting the on-screen menu language

Selecting the on-screen menu language

Select the desired on-screen menu language.

Press z (receiver power) to turn on the unit.

Turn on the TV and switch the TV input to display video from the

unit (HDMI OUT jack).

NOTE

When you turn on the unit for the first time, a message regarding the network setup appears. You

can switch the language on this message screen.

Press SETUP.

Use the cursor keys to select “Language” and press ENTER.

Use the cursor keys to select the desired language.

To exit from the menu, press SETUP.

This completes the necessary settings.

NOTE

The information on the front display is provided in English only.

8 Configuring the necessary speaker settings

Assigning speaker configuration

If you use any of the following speaker configurations, perform the following procedure

to configure the corresponding speaker settings manually before performing YPAO.

• Using the bi-amp connection (playing back more high-quality sounds with bi-amp

connections)

• Using the Zone B speakers

• Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT)

NOTE

For details on the speaker configurations, see the following:

▪ “Connecting front speakers that support bi-amp connections” (p.23)

▪ “Playing back music in multiple rooms” (p.43)

▪ “Using Virtual CINEMA FRONT” (p.22)

Press z (receiver power) to turn on the unit.

Turn on the TV and switch the TV input to display video from the

unit (HDMI OUT jack).

NOTE

If you turn on the unit for the first time, the message regarding the network setup appears. For now,

press RETURN and proceed to Step 3.

Press SETUP.

Use the cursor keys to select “Speaker” and press ENTER.

Use the cursor keys to select “Configuration” and press ENTER.

Configure the corresponding speaker settings.

▪ Using bi-amp connections or Zone B speakers, select your speaker

system in “

Power Amp Assign

”. For details, see the following:

– “Setting your speaker system” (p.93)

▪ Using the surround speakers for front 5.1-channel system (Virtual

CINEMA FRONT), select “On” in “Virtual CINEMA FRONT”. For details,

see the following:

– “Setting the use of Virtual CINEMA FRONT” (p.96)

To exit from the menu, press SETUP.

This completes the speaker settings.

Optimizing the speaker settings automatically

(YPAO)

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker

connections, measures the distances from them to your listening position(s), and then

automatically optimizes the speaker settings, such as volume balance and acoustic

parameters, to suit your room.

NOTE

▪ Use YPAO after connecting a TV and speakers to the unit.

▪ Configure the corresponding speaker settings manually before performing YPAO. For details on the

settings, see the following:

– “Assigning speaker configuration” (p.32)

▪ During the measuring process, test tones are output at high volume, and you cannot adjust the volume.

▪ During the measuring process, keep the room as quiet as possible and do not stand between the

speakers and the YPAO microphone for accurate measurement.

▪ Do not connect headphones.

Press z (receiver power) to turn on the unit.

Turn on the TV and switch the TV input to display video from the

unit (HDMI OUT jack).

Turn on the subwoofer and set the volume to half. If the crossover

frequency is adjustable, set it to maximum.

VOLUME HIGH CUT

CROSSOVER/

MIN MAXMIN MAX

Place the YPAO microphone at your listening position and

connect it to the YPAO MIC jack on the front panel.

Place the YPAO microphone at your listening position (same height as

your ears). We recommend the use of a tripod as a microphone stand.

You can use the tripod screws to stabilize the microphone.

1 2

4 5

The unit (front)

Ear height

The following screen appears on the TV.

Setting of “Power Amp Assign” in the “Setup” menu

To start the measurement, use the cursor keys to select “Start”

and press ENTER.

The measurement will start in 10 seconds. Press ENTER to start the

measurement immediately.

The following screen appears on the TV when the measurement finishes.

The number of speakers (front side/rear side/subwoofer)

Speaker distance (nearest/farthest)

Adjustment range of speaker output level

Warning message (if available)

NOTE

▪ To stop the measurement temporarily, press RETURN.

▪ If any error message (such as E-1) or warning message (such as W-1) appears, see the

following:

– “Error messages from YPAO” (p.35)

– “Warning messages from YPAO” (p.36)

▪ A speaker with a problem is indicated by blinking of the speaker indicators in the front display.

▪ If multiple warnings are given (when operating with the front display), use the cursor keys to

check the other warning messages.

Confirm the results displayed on the screen and press ENTER.

Use the cursor keys to select “SAVE” and press ENTER.

The adjusted speaker settings are applied.

NOTE

To finish the measurement without applying the result, select “CANCEL”.

Disconnect the YPAO microphone from the unit.

This completes optimization of the speaker settings.

NOTICE

▪ The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be

exposed to direct sunlight or high temperatures (such as on top of AV equipment).

Error messages from YPAO

If any error message is displayed during the measurement, resolve the problem and

perform YPAO again.

Error message

TV screen

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

E-5:NOISY

VOL .

E-9:CANCEL

Front display

Error message Cause Remedy

E-1:No Front SP

(E-1:NO FRNT SP)

Front speakers are not

detected.

Exit YPAO, turn off the unit, and then

check the speaker connections.

E-2:No Sur. SP

(E-2:NO SUR SP)

One of the surround

speakers cannot be

detected.

E-5:Noisy

(E-5:NOISY)

The noise is too loud.

Keep the room quiet and retry YPAO. If

you select “PROCEED”, YPAO takes the

measurement again and ignores any

noise detected.

E-7:No MIC

(E-7:NO MIC)

The YPAO microphone has

been removed.

Connect the YPAO microphone to the

YPAO MIC

jack firmly and retry YPAO.

E-8:No Signal

(E-8:NO SIGNAL)

The YPAO microphone

cannot detect test tones.

Connect the YPAO microphone to the

YPAO MIC

jack firmly and retry YPAO. If

this error occurs repeatedly, contact the

nearest authorized Yamaha dealer or

service center.

E-9:User Cancel

(E-9:CANCEL)

The measurement has been

canceled.

Retry or exit YPAO as necessary.

E-10:Internal Err.

(

E-10:INTERNAL)

An internal error has

occurred.

Exit YPAO, and turn off and on the unit. If

this error occurs repeatedly, contact the

nearest authorized Yamaha dealer or

service center.

NOTE

▪ Text in parentheses denotes indicators on the front display.

▪ To exit the YPAO measurement for resolving the problem, use the cursor keys to select “EXIT” and press

ENTER.

▪ For the error messages E-5 and E-9 only, you can proceed with the current YPAO measurement. Press

ENTER, and then use the cursor keys to select “PROCEED” and press ENTER.

▪ To retry the YPAO measurement from beginning, press

ENTER, and then use the cursor keys to select

“RETRY” and press ENTER.

Warning messages from YPAO

If a warning message is displayed after the measurement, you can still apply the

measurement results by following on-screen instructions.

However, we recommend you perform YPAO again in order to use the unit with the

optimal speaker settings.

Warning message

TV screen

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

W-1:PHASE

Problem speaker (blinks)

Front display

Warning message Cause Remedy

W-1:Out of Phase

(W-1:PHASE)

A speaker cable may be

connected with the reverse

polarity (+/-).

Check the cable connections (+/-) of the

problem speaker.

If the speaker is connected incorrectly:

Turn off the unit, reconnect the speaker

cable.

If the speaker is connected correctly:

Depending on the type of speakers or

room environment, this message may

appear even if the speakers are

connected correctly. In this case, you

can ignore the message.

W-2:Over Distance

(W-2:DISTANCE)

A speaker is placed more

than 24 m (80 ft) from the

listening position.

Exit YPAO, turn off the unit, and place the

problem speaker within 24 m (80 ft) of the

listening position.

W-3:Level Error

(W-3:LEVEL)

There are significant volume

differences between the

speakers.

Check the usage environment and cable

connections (+/-) of each speaker, and

the volume of the subwoofer. If there is

any problem, exit YPAO, turn off the unit,

and then reconnect speaker cable or

correct the speaker positions. We

recommend using the same speakers or

speakers with specifications that are as

similar as possible.

NOTE

Text in parentheses denotes indicators on the front display.

9 Setting MusicCast

What is MusicCast

MusicCast is a brand new wireless musical solution from Yamaha, allowing you to

share music among all of your rooms with a variety of devices. You can enjoy music

from your smartphone, PC, NAS drive and music streaming service anywhere in your

house with one easy-to-use application. For more details and a lineup of MusicCast

compatible products, refer to the following site:

http://www.yamaha.com/musiccast/

• Seamlessly control all MusicCast compatible devices with the dedicated application

“MusicCast CONTROLLER”.

• Link a MusicCast compatible device to another device in a different room and play

them back simultaneously.

• Play back music from music streaming services. (The compatible music streaming

services may differ depending on your region and product).

• Configure wireless network settings of MusicCast compatible devices.

Using MusicCast CONTROLLER

To use the network features on the MusicCast compatible device, you need the

dedicated application “MusicCast CONTROLLER” for the operation. Search for the

free application “MusicCast CONTROLLER” on the App Store or Google Play and

install it to your device.

Adding the unit to the MusicCast network

Perform the following procedure to add the unit to the MusicCast network. You can

also configure the unit’s wireless network settings at once.

NOTE

The SSID and security key for your network will be needed.

Tap the “MusicCast CONTROLLER” application icon on your

mobile device and tap “Setup”.

NOTE

If you have already connected other MusicCast compatible devices to the network, tap “Settings”

and then “Add New Device”.

Operate the “MusicCast CONTROLLER” application following the

on screen instructions, then hold down

CONNECT on the front

panel of the unit for 5 seconds.

CONNECT

Operate the “MusicCast CONTROLLER” application following the

onscreen instructions to set up the network.

This completes adding the unit to the MusicCast network and the network settings.

NOTE

▪ AirPlay and DSD audio cannot be delivered.

▪ When the direct playback mode is enabled, input sources other than the network sources, Bluetooth and

USB cannot be delivered.

▪ If you configure the unit's wireless settings with this method, the wireless LAN indicator of the front display

lights up when the unit is connecting to a network (even if a wired connection is used).

▪ You can interlock the power of MusicCast devices with the power of the unit (the MusicCast master). For

details on the settings, see the following:

– “Setting the power interlock from the unit to MusicCast compatible devices” (p.113)

ENJOYING SOUND

Enjoying sound field effects

Select your favorite sound mode

The unit is equipped with a variety of sound programs and surround decoders that

allow you to enjoy playback sources with your favorite sound mode (such as sound

field effect or stereo playback).

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

PROGRAM

STRAIGHT

ENHANCER

BASS

DVD

S C ENE

RADIO

SLEEP

DIRECT

ZONE A ZONE B

NE T

S C EN

ADIO

SLEEP

ZONE

A Z

NE T

STRAIGHT

IRECT

ENHANCER

BASS

PROGRAM

NOTE

▪ The sound mode can be applied separately to each input source.

▪ You can check which speakers are currently outputting sound by looking at the speaker indicators on the

front display.

▪ You can assign the unit's functions of sound mode to the RED/GREEN/YELLOW/BLUE keys of the remote

control. For details, see the following:

– “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control” (p.109)

Enjoying 3D sound fields (CINEMA DSP 3D)

The unit is equipped with a variety of sound programs that utilize Yamaha's original

DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like

actual movie theaters or concert halls in your room and enjoy natural three-

dimensional sound fields.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

SLEEP

STEREO

VOL .

Sci-Fi

Sound program category

“CINEMA DSP” lights up

Sound program

NOTE

▪ You can adjust the sound field effect level. For details, see the following:

– “Adjusting the sound field effect level” (p.81)

▪ The sound mode can be applied separately to each input source.

Enjoying sound field effects optimized for the type of

content

The unit is equipped with a variety of sound programs.

You can enjoy playback sources with your favorite sound mode, such as with a sound

field effect added or with stereo playback.

• We recommend a sound program in the “MOVIE” category to enjoy video content.

• We recommend a sound program in the “MUSIC” category to enjoy music content.

• We recommend a sound program in the “STEREO” category to enjoy stereo

playback.

For details on the sound programs, see the following:

• “Selecting sound programs” (p.79)

NOTE

You can select a sound program by pressing PROGRAM.

Enjoying sound field effects without surround

speakers (Virtual CINEMA DSP)

If you select one of the sound programs (except 2ch Stereo and 5ch Stereo) when no

surround speakers are connected, the unit automatically creates the surround sound

field using the front speakers.

NOTE

When Virtual CINEMA DSP is working, “VIRTUAL” lights up on the front display.

Enjoying surround sound with 5 speakers placed in

front (Virtual CINEMA FRONT)

You can enjoy the surround sound even when the surround speakers are placed in

front.

When “Virtual CINEMA FRONT” in the “Setup” menu is set to “On”, the unit creates the

virtual surround speakers in the rear side to allow you to enjoy multichannel surround

sound with the 5 speakers placed in the front.

NOTE

▪ For details on the settings, see the following:

– “Setting the use of Virtual CINEMA FRONT” (p.96)

▪ When Virtual CINEMA FRONT is working, “VIRTUAL” lights up on the front display.

Enjoying surround sound with headphones (SILENT

CINEMA)

You can enjoy surround or sound field effects, like a multichannel speaker system, with

stereo headphones by connecting the headphones to the PHONES jack and selecting

a sound program or a surround decoder.

Enjoying unprocessed playback

Enjoying original sound (straight decode)

When STRAIGHT is pressed and the straight decode mode is enabled, the unit

produces stereo sound from the front speakers for 2-channel sources such as CDs,

and produces unprocessed multichannel sounds for multichannel sources.

LINK

ECO

MASTER

OUT

DRC

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

SLEEP

STEREO

PARTY

TUNED

YPAO

VOL.

ENHANCER

VOL .

STRAIGHT

Each time you press the key, the straight decode mode is enabled or disabled.

Enjoying multichannel playback without sound field

effects (surround decoder)

Press PROGRAM to select “Sur.Decode”. The previously selected surround decoder is

selected. The surround decoder enables multichannel playback from 2-channel

sources without sound field effects.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

PROGRAM

STRAIGHT

ENHANCER

BASS

DVD

S C ENE

RADIO

SLEEP

DIRECT

ZONE A ZONE B

NE T

IGHT

ENHANCER

S C EN

ADIO

SLEEP

DIRECT

ZONE

A Z

NE T

PROGRAM

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

DPL Movie

“SUR. DECODE” appears

NOTE

▪ You cannot change the previously selected surround decoder by pressing PROGRAM. To change it, use

“Sur.Decode” in the “Option” menu. For details, see the following:

– “Selecting the surround decoder used in the program” (p.81)

▪ For details on each decoder, see the following:

– “Glossary of audio decoding format” (p.144)

▪ You can adjust the surround decoder parameters in “DSP Parameter” in the “Setup” menu. For details,

see the following:

– “Setting the broadening effect of the front sound field” (p.102)

– “Adjusting the broadening effect of the center sound field” (p.102)

– “Adjusting the difference in level between the front and surround sound fields” (p.102)

– “Adjusting the center localization (broadening effect) of the front sound field” (p.102)

Enjoying pure high fidelity sound (direct playback)

When DIRECT is pressed and the direct playback mode is enabled, the unit plays

back the selected source with the least circuitry. It allows you to enjoy Hi-Fi sound

quality.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

DIRECT

Each time you press the key, the direct playback mode is enabled or disabled.

NOTE

▪ When the direct playback mode is enabled, the following functions are not available.

– Selecting sound programs

– Using the Zone B function

– Adjusting the tone control

– Operating the on-screen “Setup” and “Option” menus

– Viewing information on the front display (when not in operation)

▪ When the direct playback mode is enabled, the front display may become dark.

Enjoying enhanced bass sound

Enhancing the bass (Extra Bass)

Press BASS to enable Extra Bass and enjoy enhanced bass sound, regardless of the

size of the front speakers and the presence or absence of a subwoofer.

Each time you press the key, Extra Bass is enabled or disabled.

NOTE

You can also use “Extra Bass” in the “Setup” menu to enable/disable Extra Bass. For details, see the

following:

▪ “Setting the use of Extra Bass” (p.96)

Enjoying enhanced compressed music

Playing back digitally compressed formats with

enriched sound (Compressed Music Enhancer)

Press ENHANCER to enable Compressed Music Enhancer and add depth and

breadth to the sound, allowing you to enjoy a dynamic sound close to the original

sound before it was compressed. This function can be used along with any other

sound modes.

LINK

ECO

MASTER

OUT

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

YPAO

VOL.

VOL .

Enhancer On

ENHANCER

“ENHANCER” lights up

Each time you press the key, Compressed Music Enhancer is enabled or disabled.

NOTE

▪ Compressed Music Enhancer does not work on the following audio sources.

– Signals whose sampling frequency is over 48 kHz

– DSD audio

▪ You can also use “Enhancer” in the “Option” menu to enable/disable Compressed Music Enhancer. For

details, see the following:

– “Setting Compressed Music Enhancer” (p.82)

Enjoying music in multiple rooms

Playing back music in multiple rooms

The Zone A/B function allows you to play back an input source in the room where the

unit is installed (Zone A) and in another room (Zone B).

For example, you can turn on Zone A (turn off Zone B) when you are in the living room,

and turn on Zone B (turn off Zone A) when you are in the study room. Also, you can

turn on both zones when you want to enjoy the same input source in those rooms

simultaneously.

Living room (Zone A)

Study room (Zone B)

NOTE

▪ Multichannel sources are mixed down to 2 channels and output to the Zone B.

▪ The same input source is applied to both Zone A and Zone B.

▪ By default, the volume for Zone B changes in conjunction with the volume for Zone A. If there is volume

difference between Zone A/B, you can correct it, and also you can adjust the volume for Zone B

separately. For details, see the following:

– “Correcting volume difference between Zone A and Zone B” (p.45)

– “Adjusting the volume for Zone B separately” (p.45)

▪ You can automatically enable/disable the audio output to Zone A/B in conjunction with a scene selection.

For details, see the following:

– “Registering a scene” (p.74)

Connecting Zone B speakers

Connect the device that will be used in Zone B to the unit.

NOTICE

▪ Remove the unit’s power cable from the AC wall outlet before connecting speakers.

▪ Ensure that the bare wires of the speaker cable do not touch one another or come into contact with the

unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit,

“Check SP Wires” will appear on the front display when the unit is turned on.

Connect the speakers placed in Zone B to the unit with speaker cables.

To utilize the SURROUND/BI-AMP/ZONE B terminals for Zone B speakers, set “Power

Amp Assign” in the “Setup” menu to “Zone B” after connecting the power cable to an

AC wall outlet. For details, see the following:

• “Setting your speaker system” (p.93)

1 2

The unit (rear)

Zone A

Zone B

NOTE

The following speakers cannot be connected simultaneously.

▪ Zone B speakers

▪ Bi-amp speakers

Operating the Zone B

Basic procedure for playing back music in Zone B is as follows.

Slide the Zone switch to “ZONE B”.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

PROGRAM

STRAIGHT

ENHANCER

BASS

DVD

S C ENE

RADIO

SLEEP

DIRECT

ZONE A ZONE B

NE T

OG R

IGHT

ENHANCER

S C EN

ADIO

SLEEP

DIRECT

NE T

ZONE A

ONE B

Press z (receiver power).

Each time you press the key, the ZONE B audio output is on or off.

ENHANCER

LINK

ECO

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

MASTER

VOL .

ZONE

HDMI1

“ZONE B” lights up

Use the input selection keys to select an input source.

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNING

MEMORY

BLUE

YELLOW

GREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAY

RETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A

ZONE B

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

BLUETOOTH

NET

USB

FM/AM

INPU T

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

MUTE

FM/AM

VOLUME

PROGRAM

USB

INPU T

NET

BLUETOOTH

MUTE

OLUME

OG R

Input selection keys

NOTE

The same input source is applied to both Zone A and Zone B.

Start playback on the external device or select a radio station.

Correcting volume difference between Zone A and

Zone B

If you are bothered by volume difference between Zone A/B, perform the following

procedure to adjust the volume for Zone B.

NOTE

Slide the Zone switch to “ZONE A” in menu operations.

Press OPTION.

Use the cursor keys to select “Volume Trim” and press ENTER.

Use the cursor keys to select “ZoneB Trim” and adjust the setting.

Setting range

-10.0 dB to +10.0 dB (0.5 dB increments)

Press OPTION.

This completes the settings.

NOTE

This setting is not effective when “ZoneB Volume” in the “Setup” menu is set to “Async.”. For details, see the

following:

▪ “Adjusting the volume for Zone B in conjunction with the volume for Zone A” (p.105)

Adjusting the volume for Zone B separately

You can separately adjust the volume for Zone B using the remote control.

NOTE

Slide the Zone switch to “ZONE A” in menu operations.

Press SETUP.

Use the cursor keys to select “Sound” and press ENTER.

Use the cursor keys to select “Volume” and press ENTER.

Use the cursor keys to select “ZoneB Volume” .

Use the cursor keys to select “Async.” and press ENTER.

NOTE

When “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB.

Press SETUP.

Slide the Zone switch to “ZONE B”.

Press VOLUME to adjust the volume for Zone B.

NOTE

To mute the audio output to Zone B, press MUTE.

PLAYBACK

Basic playback procedure

Basic procedure for playing back video and music

Basic procedure for playing back video and music is as follows.

Turn on the external devices (such as a TV or BD/DVD player)

connected to the unit.

Use the input selection keys to select an input source.

MUTE

FM/AM

VOLUME

PROGRAM

USB

INPU T

NET

BLUETOOTH

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

OG R

VOLUME

Input selection keys

Start playback on the external device or select a radio station.

Press VOLUME to adjust the volume.

NOTE

▪ To mute the audio output, press MUTE. Press MUTE again to unmute.

▪ Refer to the instruction manual for the external device.

Switching information on the front display

Press INFO on the front panel to select between the various display items on the front

display, as shown in the following table.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Audio Decoder

Item

About 3 seconds after a display item is selected, its corresponding information

appears.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

DPL Movie

Information

Currently input source Displayed item

HDMI

AUX

AUDIO

Input (input source name), DSP Program (sound mode name), Audio

Decoder (decoder name*)

Bluetooth

USB

Song (song title), Artist (artist name), Album (album name), DSP

Program (sound mode name), Audio Decoder (decoder name*)

SERVER

AirPlay

Song (song title), Artist (artist name), Album (album name), DSP

Program (sound mode name), Audio Decoder (decoder name*), IP

Address, Ethernet MAC, Wi-Fi MAC

NET RADIO

Song (song title), Album (album name), Station (station name), DSP

Program (sound mode name), Audio Decoder (decoder name*), IP

Address, Ethernet MAC, Wi-Fi MAC

MusicCast Link

DSP Program (sound mode name), Audio Decoder (decoder name*),

IP Address, Ethernet MAC, Wi-Fi MAC

TUNER (FM/AM)

Frequency (frequency), DSP Program (sound mode name), Audio

Decoder (decoder name*)

(U.K., Europe, Russia and Middle East models only)

Radio Data System data is also available when the unit is tuned into a

Radio Data System broadcasting station. For details, see the

following:

• “Displaying the Radio Data System information” (p.54)

TUNER (DAB)

(RX-D485 only)

For details, see the following:

• “Displaying the DAB information” (p.59)

* The name of the audio decoder currently activated is displayed. If no audio decoder

is activated, “Decoder Off” appears.

NOTE

Available items vary depending on the selected input source. The displayed item can also be applied

separately to each input group which is shown in the table and divided by ruled lines.

Item names and functions of the playback screen

The item names and functions of the playback screen, available when your TV is

connected to the unit via HDMI, are as follows.

Status indicators

Display the current shuffle/repeat settings and playback status (such as play/

pause).

Playback information

Displays the artist name, album name, song title, and elapsed time.

Use the following remote control keys to control playback.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

TUNING

PRESET

TUNING

MEMORY

TOP

HOME

POP UP/MENU

BLUE

YELLOWGREEN

RED

TUNING

PRESET

TUNING

BLUE

YELL

REE

External device operation

keys

External device

operation keys

Function

Resumes playback from pause.

Stops playback.

Stops playback temporarily.

Skips forward/backward.

NOTE

Displayed items vary depending on the content of playback.

Item names and functions of the browse screen

The item names and functions of the browse screen, available when your TV is

connected to the unit via HDMI, are as follows. The browse screen appears when the

next input source is selected.

• USB

• SERVER

• NET RADIO

1 4

List name

Contents list

Displays the list of contents. Use the cursor keys to select an item and press ENTER

to confirm the selection.

Item number/total

Status indicators

Display the current shuffle/repeat settings and playback status (such as play/

pause).

Operation menu

Use the cursor keys to select an item. Press ENTER to confirm the selection.

Icon Function

Moves 10 pages backward.

Moves to the previous page of the list.

Moves to the next page of the list.

Moves 10 pages forward.

Moves to the playback screen.

NOTE

▪ Displayed items vary depending on the content of playback.

▪ A content selected by the cursor is displayed on the front display.

Listening to FM/AM radio (RX-V485)

Setting the frequency steps

(Asia, Taiwan, Brazil, General, and Central and South America models only)

At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM.

Depending on your country or region, set the frequency steps to 100 kHz for FM and

10 kHz for AM.

Set the unit to standby mode.

When holding down STRAIGHT on the front panel, press z

(power).

(power)

STRAIGHTPROGRAM

Press PROGRAM to select “TU”.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

TU••••FM50/AM9

Press STRAIGHT to select “FM100/AM10”.

Press z (power) to set the unit to standby mode and turn it on

again.

This completes the settings.

Selecting a frequency for reception

You can tune into a radio station by specifying its frequency.

NOTE

The radio frequencies differ depending on the country or region where the unit is being used. The explanation

of this section uses a display with frequencies used in U.K. and Europe models.

Press FM/AM to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

MUT E VIRTU AL

VOL .

FM 87.50MHz

Press TUNING to set a frequency.

Hold down the key for about a second to search stations automatically.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

TUNING

PRESET

TUNING

MEMORY

TOP

HOME

POP UP/MENU

BLUE

YELLOWGREEN

RED

PRESET

MEMO

HOME

POP

UP/MENU

BLUE

YELL

REE

TUNING

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

STEREO

TUNED

FM 98.50MHz

On the front display, “TUNED” lights up when the unit is receiving an

FM/AM radio station signal.

“STEREO” lights up when the unit is receiving a stereo FM radio signal.

NOTE

You can watch videos input from external devices while listening to radio. For details, see the

following:

▪ “Selecting a video source to be output with the selected audio source” (p.84)

Selecting a preset station

Tune into a registered radio station by selecting its preset number.

Press FM/AM to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press PRESET to select the desired radio station.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

TUNING

PRESET

TUNING

MEMORY

TOP

HOME

POP UP/MENU

BLUE

YELLOWGREEN

RED

TUNING

MEMO

HOME

POP

UP/MENU

BLUE

YELL

YELLYELL

REE

PRESET

ENHANCER

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

LINK

ECO

MASTER

OUT

VOL .

STEREO

TUNED

01:FM 98.50MHz

NOTE

“No Presets” appears on the front display when no radio stations are registered.

Registering radio stations automatically (Auto

Preset)

Automatically register FM radio stations with strong signals.

NOTE

▪ You can register up to 40 radio stations as presets.

▪ To register AM radio stations, see the following:

– “Registering a radio station manually” (p.53)

▪ (U.K., Europe, Russia and Middle East models only)

Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function.

Press FM/AM to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Preset

The preset number from which to start the registration is displayed on the

front display.

NOTE

To specify the preset number from which to start the registration, press cursor keys or PRESET to

select a preset number.

To start the Auto Preset process, press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

STEREO

TUNED

FPR

SBL SB SBR

FPL

VOL .

01:FM 87.50MHz

“SEARCH” appears during Auto Preset

Preset number from which to start the registration

The Auto Preset process starts and “SEARCH” appears during Auto

Preset.

NOTE

To cancel the Auto Preset process, press RETURN.

When the Auto Preset process finishes, “FINISH” appears on the front display and the

“Option” menu closes automatically.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Auto Preset

Registering a radio station manually

Select a radio station manually and register it to a preset number.

NOTE

You can register up to 40 radio stations as presets.

Press FM/AM to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press TUNING to set a frequency.

Hold down the key for about a second to search stations automatically.

Hold down MEMORY for a few seconds.

The first time that you do register a station, the selected radio station will

be registered to the preset number “01”. Thereafter, each radio station

you select will be registered to the next empty (unused) preset number

after the most recently registered number.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

TUNING

PRESET

TUNING

MEMORY

TOP

HOME

POP UP/MENU

BLUE

YELLOWGREEN

RED

TUNING

PRESET

TUNING

HOME

POP

UP/MENU

BLUE

YELL

YELLYELL

REE

MEMORY

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

01:FM 98.50MHz

STEREO

TUNED

Preset number

NOTE

To select a preset number for registering, press MEMORY once after tuning into the desired radio

station, press PRESET to select a preset number, and then press MEMORY again.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

PARTY

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

SLEEP

VOL .

02:Empty

TUNED

STEREO

“Empty” (not in use) or the frequency currently registered

This completes the registers.

Clearing preset stations

Clear radio stations registered to the preset numbers.

Press FM/AM to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Preset

Use the cursor keys to select “CLEAR”.

Use the cursor keys to select a preset station to be cleared and

press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

01:FM 98.50MHz

Preset station to be cleared

If the preset station is cleared, “Cleared” appears and then the next in-use

preset number is displayed.

01:Cleared

Repeat step 5 until all desired preset stations are cleared.

Press OPTION.

This completes the clearing preset stations.

Displaying the Radio Data System information

(U.K., Europe, Russia and Middle East models only)

Radio Data System is a data transmission system used by FM stations in many

countries. The unit can receive various types of Radio Data System data, such as

“Program Service”, “Program Type”, “Radio Text

” and “Clock Time

”, when it is tuned

into a Radio Data System broadcasting station.

Tune into the desired Radio Data System broadcasting station.

NOTE

We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations. For

details, see the following:

▪ “Registering radio stations automatically (Auto Preset)” (p.52)

Press INFO on the front panel to select between the various

display items.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

Program Type

Item name

About 3 seconds after a display item is selected, its corresponding

information appears.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

Classics

Information

Program Service

Program service name

Program Type

Current program type

Radio Text

Information on the current program

Clock Time

Current time

DSP Program

Sound mode name

Audio Decoder

Decoder name

Frequency

NOTE

“Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio

station does not provide the Radio Data System service.

Receiving traffic information automatically

(U.K., Europe, Russia and Middle East models only)

When “TUNER” is selected as the input source, the unit automatically receives traffic

information. To enable this function, perform the following procedure to set the traffic

information station.

When “TUNER” is selected as the input source, press OPTION.

Use the cursor keys to select “Traffic Program” and press ENTER.

The traffic information station search will start in 5 seconds. Press ENTER

again to start the search immediately.

NOTE

▪ To search upward/downward from the current frequency, press the cursor keys while “READY”

is displayed.

▪ To cancel the search, press RETURN.

The following screen appears for about 3 seconds when the search

finishes.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

TP FM101.30MHz

Traffic information station (frequency)

NOTE

“TP Not Found” appears for about 3 seconds when no traffic information stations are found.

Listening to DAB radio (RX-D485)

Preparing the DAB tuning

DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more

stable reception compared to analog signals. The unit can also receive DAB+ (an

upgraded version of DAB) that allows for more stations using MPEG-4 HE-AAC v2

audio codec, which has a more efficient transmission method.

NOTE

▪ The unit supports Band III (174 to 240 MHz) only.

▪ Be sure to check the DAB coverage in your area in that not all areas are currently being covered. For a list

of nationwide DAB statuses and worldwide DAB frequencies, check WorldDMB online at

http://www.worlddab.org/

▪

For details on the antenna connection, see the following:

– “Connecting the DAB/FM antenna (RX-D485)” (p.28)

Before tuning into DAB radio stations, perform an initial scan.

Press FM/DAB to select the DAB band.

The following message appears on the front display if you have not

performed an initial scan yet.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

SBL SB SBR

FPRFPL

STEREO

TUNED

VOL .

Press [ENTER]

Press ENTER to start an initial scan.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

SBL SB SBR

FPRFPL

STEREO

TUNED

VOL .

>>>------- 30%

When the initial scan finishes, the unit automatically tunes into the first

DAB radio station as stored in station order.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

SBL SB SBR

FPRFPL

STEREO

TUNED

VOL .

BBC Radio 4

NOTE

▪ If no DAB radio stations are found by an initial scan, the message in Step 1 appears again.

Press

ENTER to start an initial scan again.

▪

You can check reception strength of each DAB channel label. For details, see the following:

– “Checking reception strength of each DAB channel label” (p.60)

▪ To perform an initial scan again after some DAB radio stations are stored, select “Init Scan” in

the “Option” menu. If you perform an initial scan again, the DAB radio stations currently

registered to the preset numbers will be cleared. For details, see the following:

– “Performing an initial scan for DAB radio reception” (p.88)

Selecting a DAB radio station for reception

You can select a DAB radio station from the stations stored by the initial scan.

Press FM/DAB to select the DAB band.

“TUNER” is selected as the input source and then the DAB radio station

currently selected is displayed on the front display.

Press TUNING to select a DAB radio station.

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNING

MEMORY

BLUE

YELLOW

GREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAY

RETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A

ZONE B

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

BLUETOOTH

NET

USB

FM/AM

INPU T

VOLUME

BLUETOOTH

NET

USB

FM/DAB

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRE

TUNIN

MEM

BLUE

ELL

REE

RED

POP UP/MENU

HOME

TOP

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRESET

PRE

MEMO

MEMEMEME

MEMEME

MMM

OOO

RYRYRY

BLUE

YELL

REE

POP

UP/MENU

HOME

TUNING

(RX-D485)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

SBL SB SBR

FPRFPL

STEREO

TUNED

VOL .

Daily Service

NOTE

▪ “Off Air” appears when the selected DAB radio station is currently not available.

▪ When the unit is receiving a secondary station, “2” appears next to “DAB”.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

SBL SB SBR

FPRFPL

STEREO

TUNED

VOL .

BBC National

Secondary station

▪ You can watch videos input from external devices while listening to radio. For details, see the

following:

– “Selecting a video source to be output with the selected audio source” (p.84)

Selecting a preset DAB radio station

Tune into a registered DAB radio station by selecting its preset number.

Press FM/DAB to select “TUNER” as the input source.

“TUNER” is selected as the input source and then the DAB radio station

currently selected is displayed on the front display.

Press PRESET to select the desired DAB radio station.

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNING

MEMORY

BLUE

YELLOW

GREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAY

RETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A

ZONE B

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

BLUETOOTH

NET

USB

FM/AM

INPU T

VOLUME

BLUETOOTH

NET

USB

FM/DAB

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRE

TUNIN

MEM

BLUE

ELL

REE

RED

POP UP/MENU

HOME

TOP

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

TUNING

TUNI

TUNITUNITUNI

NNN

GGG

TUNING

TUNI

TUNITUNITUNI

NNN

GGG

MEMO

MEMEME

MMM

OOO

RYRYRY

BLUE

YELL

REE

POP

UP/MENU

HOME

PRESET

(RX-D485)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

SBL SB SBR

FPRFPL

STEREO

TUNED

VOL .

PRESET:01

NOTE

“No Presets” appears when no DAB radio stations are registered.

Registering a DAB radio station as presets

Select a DAB radio station and register it to a preset number.

NOTE

You can register up to 40 radio stations as presets.

Press FM/DAB to select the DAB band.

“TUNER” is selected as the input source and then the DAB radio station

currently selected is displayed on the front display.

Press TUNING to select a DAB radio station.

Hold down MEMORY for a few seconds.

The first time that you do register a station, the selected radio station will

be registered to the preset number “01”. Thereafter, each radio station

you select will be registered to the next empty (unused) preset number

after the most recently registered number.

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNING

MEMORY

BLUE

YELLOW

GREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAY

RETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A

ZONE B

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

BLUETOOTH

NET

USB

FM/AM

INPU T

VOLUME

BLUETOOTH

NET

USB

FM/DAB

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRE

TUNIN

MEM

BLUE

ELL

REE

RED

POP UP/MENU

HOME

TOP

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRESET

PREPRE

TUNING

TUNI

TUNITUNITUNI

NNN

GGG

TUNING

TUNI

TUNITUNITUNI

NNN

GGG

BLUE

YELL

REE

POP

UP/MENU

HOME

MEMORY

(RX-D485)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

SBL SB SBR

FPRFPL

STEREO

TUNED

VOL .

01:BBC Radio 4

Preset number

NOTE

To select a preset number for registering, press MEMORY once after tuning into the desired radio

station, press PRESET to select a preset number, and then press MEMORY again.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

SBL SB SBR

FPRFPL

STEREO

TUNED

VOL .

02:Empty

“Empty” (not in use) or “Overwrite?” (in use)

This completes the registers.

Clearing preset DAB radio stations

Clear DAB radio stations registered to the preset numbers.

Press FM/DAB to select “TUNER” as the input source.

“TUNER” is selected as the input source and then the DAB radio station

currently selected is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Preset

Use the cursor keys to select a preset station to be cleared and

press ENTER.

01:Clear?

Preset station to be cleared

If the preset station is cleared, “Cleared” appears and then the next in-use

preset number is displayed.

01:Cleared

Repeat step 4 until all desired preset stations are cleared.

Press OPTION.

This completes the clearing preset stations.

Displaying the DAB information

The unit can receive various types of DAB information when it is tuned into a DAB

radio station.

Tune into the desired DAB radio station.

Press INFO on the front panel to select between the various

display items.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

STEREO

TUNED

VOL .

Program Type

Item name

About 3 seconds after a display item is selected, its corresponding

information appears on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

SBL SB SBR

FPRFPL

STEREO

TUNED

VOL .

Classic Music

Information

Service Label

Station name

DLS (Dynamic Label

Segment)

Information on the current station

Ensemble Label

Ensemble name

Program Type

Station genre

Date And Time

Current date and time

Audio Mode

Audio mode (monaural/stereo) and bit rate

CH Label/Freq.

Channel label and frequency

Signal Quality

Signal reception quality (0 [none] to 100 [best])

DSP Program

Sound mode name

Audio Decoder

Decoder name

NOTE

Some information may not be available depending on the selected DAB radio station.

Checking reception strength of

each DAB channel label

Checking reception strength of

each DAB channel label

You can check reception strength of each DAB channel

label (0 [none] to 100 [best]).

Press FM/DAB to select “TUNER” as the

input source.

“TUNER” is selected as the input source and

then the DAB radio station currently selected

is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Tune

AID” and press ENTER.

Use the cursor keys to select the

desired DAB channel label.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

STEREO

TUNED

VOL .

5A Level: 80

DAB channel label Reception strength

Press OPTION.

This completes the checking.

DAB frequency information

The unit supports Band III (174 to 240 MHz) only.

Frequency Channel label

174.928 MHz 5A

176.640 MHz 5B

178.352 MHz 5C

180.064 MHz 5D

181.936 MHz 6A

183.648 MHz 6B

185.360 MHz 6C

187.072 MHz 6D

188.928 MHz 7A

190.640 MHz 7B

192.352 MHz 7C

194.064 MHz 7D

195.936 MHz 8A

197.648 MHz 8B

199.360 MHz 8C

201.072 MHz 8D

202.928 MHz 9A

204.640 MHz 9B

206.352 MHz 9C

208.064 MHz 9D

209.936 MHz 10A

211.648 MHz 10B

213.360 MHz 10C

215.072 MHz 10D

216.928 MHz 11A

218.640 MHz 11B

220.352 MHz 11C

222.064 MHz 11D

223.936 MHz 12A

225.648 MHz 12B

227.360 MHz 12C

229.072 MHz 12D

230.784 MHz 13A

Frequency Channel label

232.496 MHz 13B

234.208 MHz 13C

235.776 MHz 13D

237.488 MHz 13E

239.200 MHz 13F

Listening to FM radio (RX-D485)

Selecting a frequency for FM radio reception

You can tune into an FM radio station by specifying its frequency.

NOTE

The radio frequencies differ depending on the country or region where the unit is being used. The explanation

of this section uses a display with frequencies used in U.K. and Europe models.

Press FM/DAB to select the FM band.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

MUT E VIRTU AL

VOL .

FM 87.50MHz

Press TUNING to set a frequency.

Hold down the key for about a second to search stations automatically.

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNING

MEMORY

BLUE

YELLOW

GREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAY

RETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A

ZONE B

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

BLUETOOTH

NET

USB

FM/AM

INPU T

VOLUME

BLUETOOTH

NET

USB

FM/DAB

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRE

TUNIN

MEM

BLUE

ELL

REE

RED

POP UP/MENU

HOME

TOP

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRESET

PRE

MEMO

MEMEMEME

MEMEME

MMM

OOO

RYRYRY

BLUE

YELL

REE

POP

UP/MENU

HOME

TUNING

(RX-D485)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

STEREO

TUNED

FM 98.50MHz

On the front display, “TUNED” lights up when the unit is receiving an FM

radio station signal.

“STEREO” lights up when the unit is receiving a stereo FM radio signal.

NOTE

You can watch videos input from external devices while listening to radio. For details, see the

following:

▪ “Selecting a video source to be output with the selected audio source” (p.84)

Selecting a preset FM radio station

Tune into a registered FM radio station by selecting its preset number.

Press FM/DAB to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press PRESET to select the desired FM radio station.

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNING

MEMORY

BLUE

YELLOW

GREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAY

RETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A

ZONE B

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

BLUETOOTH

NET

USB

FM/AM

INPU T

VOLUME

BLUETOOTH

NET

USB

FM/DAB

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRE

TUNIN

MEM

BLUE

ELL

REE

RED

POP UP/MENU

HOME

TOP

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

TUNING

TUNI

TUNITUNITUNI

NNN

GGG

TUNING

TUNI

TUNITUNITUNI

NNN

GGG

MEMO

MEMEME

MMM

OOO

RYRYRY

BLUE

YELL

REE

POP

UP/MENU

HOME

PRESET

(RX-D485)

ENHANCER

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

LINK

ECO

MASTER

OUT

VOL .

STEREO

TUNED

01:FM 98.50MHz

NOTE

“No Presets” appears on the front display when no radio stations are registered.

Registering FM radio stations automatically (Auto

Preset)

Automatically register FM radio stations with strong signals.

NOTE

▪ You can register up to 40 radio stations as presets.

▪ (U.K. and Europe models only)

Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function.

Press FM/DAB to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Preset

The preset number from which to start the registration is displayed on the

front display.

NOTE

To specify the preset number from which to start the registration, press cursor keys or PRESET to

select a preset number.

To start the Auto Preset process, press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

STEREO

TUNED

FPR

SBL SB SBR

FPL

VOL .

01:FM 87.50MHz

“SEARCH” appears during Auto Preset

Preset number from which to start the registration

The Auto Preset process starts and “SEARCH” appears during Auto

Preset.

NOTE

To cancel the Auto Preset process, press RETURN.

When the Auto Preset process finishes, “FINISH” appears on the front display and the

“Option” menu closes automatically.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Auto Preset

Registering an FM radio station manually

Select an FM radio station manually and register it to a preset number.

NOTE

You can register up to 40 radio stations as presets.

Press FM/DAB to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press TUNING to set a frequency.

Hold down the key for about a second to search stations automatically.

Hold down MEMORY for a few seconds.

The first time that you do register an FM radio station, the selected radio

station will be registered to the preset number “01”. Thereafter, each radio

station you select will be registered to the next empty (unused) preset

number after the most recently registered number.

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNING

MEMORY

BLUE

YELLOW

GREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAY

RETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A

ZONE B

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

BLUETOOTH

NET

USB

FM/AM

INPU T

VOLUME

BLUETOOTH

NET

USB

FM/DAB

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRE

TUNIN

MEM

BLUE

ELL

REE

RED

POP UP/MENU

HOME

TOP

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP UP/MENU

HOME

TOP

PRESET

PREPRE

TUNING

TUNI

TUNITUNITUNI

NNN

GGG

TUNING

TUNI

TUNITUNITUNI

NNN

GGG

BLUE

YELL

REE

POP

UP/MENU

HOME

MEMORY

(RX-D485)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

01:FM 98.50MHz

STEREO

TUNED

Preset number

NOTE

To select a preset number for registering, press MEMORY once after tuning into the desired radio

station, press PRESET to select a preset number, and then press MEMORY again.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

PARTY

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

SLEEP

VOL .

02:Empty

TUNED

STEREO

“Empty” (not in use) or the frequency currently registered

This completes the registers.

Clearing preset FM radio stations

Clear FM radio stations registered to the preset numbers.

Press FM/DAB to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Preset

Use the cursor keys to select “CLEAR”.

Use the cursor keys to select a preset station to be cleared and

press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

01:FM 98.50MHz

Preset station to be cleared

If the preset station is cleared, “Cleared” appears and then the next in-use

preset number is displayed.

01:Cleared

Repeat step 5 until all desired preset stations are cleared.

Press OPTION.

This completes the clearing preset stations.

Displaying the Radio Data System information

(U.K. and Europe models only)

Radio Data System is a data transmission system used by FM stations in many

countries. The unit can receive various types of Radio Data System data, such as

“Program Service”, “Program Type”, “Radio Text

” and “Clock Time

”, when it is tuned

into a Radio Data System broadcasting station.

Tune into the desired Radio Data System broadcasting station.

NOTE

We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations. For

details, see the following:

▪ “Registering FM radio stations automatically (Auto Preset)” (p.62)

Press INFO on the front panel to select between the various

display items.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

Program Type

Item name

About 3 seconds after a display item is selected, its corresponding

information appears on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

Classics

Information

Program Service

Program service name

Program Type

Current program type

Radio Text

Information on the current program

Clock Time

Current time

DSP Program

Sound mode name

Audio Decoder

Decoder name

Frequency

NOTE

“Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio

station does not provide the Radio Data System service.

Playing back music stored on a Bluetooth® device

Playback Bluetooth® device music on the unit

You can play back music files stored on a Bluetooth device (such as smartphones) on

the unit.

Bluetooth device

(such as smartphones)

The unit

NOTE

▪ Use the wireless antennas that are standing upright for connecting to a Bluetooth device wirelessly. For

details, see the following:

– “Preparing wireless antennas (wireless connection)” (p.30)

▪ To use the Bluetooth function, turn on the Bluetooth function of a Bluetooth device.

▪ To use the Bluetooth function, set “Bluetooth” in the “Setup” menu to “On”. For details, see the following:

– “Setting the use of Bluetooth

” (p.114)

▪ For details on supported Bluetooth devices, see the following:

– “Supported Bluetooth

devices” (p.146

)

Press

BLUETOOTH to select “Bluetooth” as the input source.

On the Bluetooth device, select the unit (network name of the

unit).

A connection between the Bluetooth device and the unit will be made.

If the pass key is required, enter the number “0000”.

On the Bluetooth device, select a song and start playback.

The playback screen is displayed on the TV.

NOTE

▪ If the unit detects the Bluetooth device previously connected, the unit automatically connects to

the Bluetooth device after Step 1. To establish another Bluetooth connection, first terminate the

current Bluetooth connection.

▪ To terminate the Bluetooth connection, perform one of the following operations.

– Perform the disconnect operation on the Bluetooth device.

– Select an input source other than “Bluetooth” on the unit.

– Select “Disconnect” in “Audio Receive” in the “Setup” menu.

Enjoying audio using Bluetooth® speakers/

headphones

You can enjoy audio played back on the unit using Bluetooth speakers/headphones.

Bluetooth speakers/headphones

The unit

NOTE

▪ Sounds will be also output from the speakers connected to the unit.

▪ AirPlay and DSD audio cannot be delivered.

▪ You cannot use the Bluetooth audio transmitter function and the Bluetooth audio receiver function at the

same time.

Use the input selection keys on the remote control to select an

input source.

Select an input source other than Bluetooth.

Press SETUP.

Use the cursor keys to select “Bluetooth” and press ENTER.

Use the cursor keys to select “Transmitter” and then set to “On”.

Use the cursor keys to select “Device Search” and press ENTER

to search the Bluetooth devices.

The list of Bluetooth devices is displayed.

Use the cursor keys to select the Bluetooth speakers/headphones

to be connected with the unit and press ENTER.

When the connection process finishes, “Completed” appears and audio

played back on the unit will be reproduced from the Bluetooth speakers/

headphones.

NOTE

If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing

mode and then perform “Device Search” operation again.

Press ENTER.

This completes the settings.

NOTE

To terminate the Bluetooth connection, perform one of the following operations.

▪ Perform the disconnect operation on the Bluetooth speakers/headphones.

▪ Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Transmitter", and then "Off".

Playing back music with AirPlay

Playback of iTunes/iPhone music contents with

AirPlay

The AirPlay allows you to play back iTunes or iPhone/iPad/iPod touch music on the unit

via network.

iTunes

(Wired network or wireless network)

iPhone/iPad/iPod touch

The unit

Router

NOTE

For details on supported iPhone devices, see the following:

▪ “Supported AirPlay devices” (p.146)

Start iTunes on the PC or display the playback screen on the

iPhone.

On the iTunes/iPhone, click (tap) the AirPlay icon and select the

unit (network name of the unit) as the audio output device.

iOS 10 (example) iTunes (example)

Select a song and start playback.

The unit automatically selects “AirPlay” as the input source and starts

playback.

The playback screen is displayed on the TV.

CAUTION

▪ When you use iTunes/iPhone controls to adjust volume, the volume may be unexpectedly loud. This

could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop

playback on the iTunes/iPhone immediately. We recommend volume controls from iTunes/iPhone

within the limited range by setting “

Volume Interlock (Vol.Interlock)” in the “Option” menu.

NOTE

▪ You can turn on the unit automatically when starting playback on iTunes or iPhone. For details on the

settings, see the following:

– “Setting the use of the Network Standby function” (p.112)

▪ You can edit the network name (the unit’s name on the network) displayed on iTunes/iPhone. For details,

see the following:

– “Setting the network name of the unit” (p.113)

▪ You can adjust the unit’s volume from the iTunes/iPhone during playback. To disable volume controls from

iTunes/iPhone, see the following:

– “Enabling volume control via AirPlay” (p.87)

Playing back music stored on a USB storage device

Playback of USB storage device contents

You can play back music files stored on a USB storage device on the unit.

NOTE

For details on playable USB devices and USB file formats, see the following:

▪ “Supported USB devices” (p.146)

▪ “Supported file formats” (p.147)

Connect the USB storage device to the USB jack.

STRAIGHT

(CONNECT)

AUX USB

AUDIO

5V 1A

RADIO

The unit (front)

USB storage device

NOTE

▪ If the USB storage device contains many files, it may take time to load them. In this case,

“Loading…” appears on the front display.

▪

Stop playback of the USB storage device before disconnecting it from the USB jack.

▪ Connect a USB storage device directly to the USB jack of the unit. Do not use extension cables.

▪ The unit cannot charge USB devices while it is in standby mode.

Press USB to select “USB” as the input source.

The browse screen is displayed on the TV.

NOTE

If playback is ongoing on your USB storage device, the playback screen is displayed.

Use the cursor keys to select an item and press ENTER.

If a song is selected, playback starts and the playback screen is

displayed.

NOTE

▪ To return to the top level while on the browse screen, hold down RETURN.

▪ To switch the screen mode browse/playback/off, press DISPLAY.

NOTE

▪ You can configure the shuffle/repeat settings for playback of contents. For details, see the following:

– “Configuring the shuffle setting” (p.86)

– “Configuring the repeat setting” (p.87)

▪ You can register contents as shortcuts and access them directly. For details, see the following:

– “Registering a favorite content as shortcut” (p.75)

Playing back music stored on media servers (PCs/NAS)

Media sharing setup on media servers (PCs/NAS)

To play back music files stored on your media servers, first you need to configure the

media sharing setting on each music server.

The setting procedure may vary depending on the media server. The following

procedure is a setup example for Windows Media Player 12.

NOTE

▪ For a media server with software except Windows Media Player installed, refer to the instruction manual

for the device or software and configure the media sharing settings.

▪ The setting procedure may vary depending on the view setting of Windows Media Player or the settings of

PC.

Start Windows Media Player 12 on your PC.

Select “Stream”, then “Turn on media streaming”.

Click “Turn on media streaming”.

Select “Allowed” from the drop-down list next to the unit’s model

name.

Click “OK” to exit.

This completes the settings.

NOTE

For details on media sharing settings, refer to Windows Media Player help.

Playing back music stored on media servers (PCs/

NAS)

You can play back music files stored on your media server on the unit.

NOTE

▪ You need to configure the media sharing setting on each music server in advance. For details, see the

following:

– “Media sharing setup on media servers (PCs/NAS)” (p.69)

▪ To use this function, the unit and your PC must be connected to the same router. You can check whether

the network parameters (such as the IP address) are properly assigned to the unit. For details, see the

following:

– “Checking the network information of the unit” (p.110)

▪ The audio may be interrupted while using the wireless network connection. In this case, use the wired

network connection.

▪ For details on playable file formats, see the following:

– “Supported file formats” (p.147)

Press NET to select “SERVER” as the input source.

The browse screen is displayed on the TV.

NOTE

If playback of a music file selected from the unit is ongoing on your PC, the playback screen is

displayed.

Use the cursor keys to select a music server and press ENTER.

Use the cursor keys to select an item and press ENTER.

If a song is selected, playback starts and the playback screen is

displayed.

NOTE

▪ To return to the top level while on the browse screen, hold down RETURN.

▪ To switch the screen mode browse/playback/off, press DISPLAY.

NOTE

▪ You can configure the shuffle/repeat settings for playback of contents. For details, see the following:

– “Configuring the shuffle setting” (p.86)

– “Configuring the repeat setting” (p.87)

▪ You can also use the Digital Media Controller (DMC) to control playback. For details, see the following:

– “Setting the use of a Digital Media Controller” (p.112)

▪ You can register contents as shortcuts and access them directly. For details, see the following:

– “Registering a favorite content as shortcut” (p.75)

Listening to Internet radio

Selecting an Internet radio station

Select an Internet radio station and start playback.

NOTE

▪ To use this function, the unit must be connected to the Internet. You can check whether the network

parameters (such as the IP address) are properly assigned to the unit. For details, see the following:

– “Checking the network information of the unit” (p.110)

▪ You may not be able to receive some Internet radio stations.

▪ The unit uses the airable.Radio service. airable is a service of Tune In GmbH.

▪ This service may be discontinued without notice.

▪ Folder names are different depending on the language.

Press NET to select “NET RADIO” as the input source.

The browse screen is displayed on the TV.

Use the cursor keys to select an item and press ENTER.

If an Internet radio station is selected, playback starts and the playback

screen is displayed.

NOTE

▪ To return to the top level while on the browse screen, hold down RETURN.

▪ To switch the screen mode browse/playback/off, press DISPLAY.

Registering favorite Internet radio stations

You can register the Internet radio station in playback at present to the “Favorites”

folder.

While listening to Internet radio, press OPTION.

Use the cursor keys to select “Add to favorites” and press

ENTER.

On the playback screen, the current station is added to the “Favorites”

folder. On the browse screen, the station selected in the list is added to

the “Favorites” folder.

When the registering process finishes, the “Option” menu closes

automatically.

NOTE

▪ Radio stations registered to favorites are displayed with “«”.

▪ To remove a station that is registered to favorites, select the station and then select “Remove from

favorites

”.

▪ You can register Internet radio stations as shortcuts and access them directly. For details, see the

following:

– “Registering a favorite content as shortcut” (p.75)

Listening to music streaming services

Listening to a streaming service

You can listen to a streaming service with the MusicCast CONTROLLER on your

mobile device. On the MusicCast CONTROLLER screen, select the room name that

was specified for the unit, and then select the streaming service to be tuned into by its

station name. For details, see the MusicCast CONTROLLER app.

NOTE

▪ Service is limited to certain areas.

▪ Services supported with the unit may not be available depending upon some regions where the unit is

purchased.

▪ Service may change or be discontinued without notice.

▪ After registering the unit in the MusicCast CONTROLLER app, you can use the streaming service. For

details, see the following:

– “Adding the unit to the MusicCast network” (p.37)

▪ To use this function, the unit must be connected to the Internet. You can check whether the network

parameters (such as the IP address) are properly assigned to the unit. For details, see the following:

– “Checking the network information of the unit” (p.110)

▪ For details on music streaming services, see the supplements for streaming services. Access the Yamaha

Downloads site to download the supplement.

http://download.yamaha.com/

Useful playback functions

SCENE function

Selecting the input source and favorite settings with

one touch (SCENE)

The SCENE function allows you to select the following settings with just one touch.

• Input source

• Sound program

• Compressed Music Enhancer On/Off

• SCENE link playback

• Target zones

You can register four SCENE functions that are assigned to four SCENE keys on the

remote control respectively.

Selecting a registered scene

Press SCENE, and then the input source and settings registered to the corresponding

scene are selected. The unit turns on automatically when it is in standby mode.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

PROGRAM

STRAIGHT

ENHANCER

BASS

DVD

S C ENE

RADIO

SLEEP

DIRECT

ZONE A ZONE B

NE T

OG R

IGHT

ENHANCER

SLEEP

DIRECT

ZONE

A Z

SCENE

By default, the following settings are registered for each scene.

SCENE

Input

HDMI1 AUDIO1 NET RADIO TUNER

Sound program

Sci-Fi STRAIGHT 5ch Stereo 5ch Stereo

Compressed Music

Enhancer

Off On On On

SCENE link playback

On On Off Off

Target zone

Zone A Zone A Zone A Zone A

NOTE

▪ For details on the sound program, Compressed Music Enhancer and target zones, see the following:

– “Enjoying sound field effects optimized for the type of content” (p.39)

– “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.42)

– “Operating the Zone B” (p.44)

▪ The SCENE link playback function allows you to automatically turn on the TV or start playback of an

external device connected to the unit via HDMI, in conjunction with a scene selection. For details, see the

following:

– “Setting the use of SCENE link playback” (p.101)

Registering a scene

You can change the default setting and register the function that is assigned to each

SCENE key.

NOTE

We recommend registering the scene with playing back the content that you want to register.

Perform the following operations to prepare the settings you want

to assign to a scene.

▪ Select an input source

▪ Select a sound program or straight decode

▪ Enable/disable Compressed Music Enhancer

▪ Enable/disable SCENE link playback

▪ Enable/disable the audio output to Zone A/B

Hold down the desired SCENE key until “SET Complete” appears

on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

SET Complete

This completes the registers.

NOTE

For details on the settings, see the following:

▪ “Enjoying sound field effects optimized for the type of content” (p.39)

▪ “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.42)

▪ “Setting the use of SCENE link playback” (p.101)

▪ “Operating the Zone B” (p.44)

Shortcut function

Registering a favorite content as shortcut

You can register favorite Bluetooth, USB, media server and network content as

shortcuts and access them directly by selecting the shortcut numbers.

NOTE

▪ You can register up to 40 contents as shortcuts.

▪ You can also use the “Favorites” feature to register Internet radio stations. For details, see the following:

– “Registering favorite Internet radio stations” (p.71)

▪ The unit registers Bluetooth or AirPlay as an input source. No individual content can be registered.

Play back a song or a radio station to be registered.

Hold down MEMORY for a few seconds.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

TUNING

PRESET

TUNING

MEMORY

TOP

HOME

POP UP/MENU

BLUE

YELLOWGREEN

RED

TUNING

PRESET

TUNING

HOME

POP

UP/MENU

BLUE

YELL

YELLYELL

REE

MEMORY

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

STEREO

TUNED

VOL .

01:Empty

Shortcut number (flashes)

“MEMORY” appears on the front display and the shortcut number to

which the item will be registered blinks.

NOTE

To change a shortcut number to which the item will be registered, use PRESET to select the

shortcut number after step 2.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

STEREO

TUNED

VOL .

02:Empty

“Empty” (not in use) or item currently registered

Press MEMORY.

The registered shortcut number and “Memorized” appear on the front

display.

This completes the registers.

Recalling a registered content as shortcut

Recall a registered content (Bluetooth, USB, media server and network content) by

selecting the shortcut number.

NOTE

You can register up to 40 contents as shortcuts.

Press BLUETOOTH, NET or USB.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

MUTE

FM/AM

VOLUME

PROGRAM

USB

INPU T

NET

BLUETOOTH

MUTE

FM/AM

OLUME

OG R

USB

BLUETOOTH

Press PRESET to select a desired content.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

TUNING

PRESET

TUNING

MEMORY

TOP

HOME

POP UP/MENU

BLUE

YELLOWGREEN

RED

TUNING

MEMO

HOME

POP

UP/MENU

BLUE

YELL

YELLYELL

REE

PRESET

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

STEREO

TUNED

VOL .

01:USB

Playback of the selected content starts.

NOTE

▪ “No Presets” appears on the front display when no items are registered.

▪ The registered item cannot be recalled in the following cases.

– A USB storage device which contains the registered item is not connected to this unit.

– A PC which contains the registered item is turned off or not connected to the network.

– The registered network content is temporarily unavailable or out of service.

– The registered item (file) has been deleted or moved to another location.

– A Bluetooth connection cannot be established.

▪ When you register music files stored on a USB storage device or a media server (PC/NAS), this

unit memorizes the relative position of the music files in the folder. If you have added or deleted

any music files to or from the folder, this unit may not recall the music file correctly. In such

cases, register the items again.

▪ The registered content (songs and Internet radio stations) can be displayed as a list and easily

removed by using MusicCast CONTROLLER on your mobile device. For details, see the

following:

– “Using MusicCast CONTROLLER” (p.37)

Configuring playback settings for different playback sources (Option menu)

Basic operation of the Option menu

Perform the following basic procedure to operate the “Option” menu. With the “Option”

menu, you can configure different playback settings according to the input source

currently being played back.

Press OPTION.

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

P-UP

P MEN

PLAY

RETURN

OPTION

ENTER

SETUP

MUTE

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNING

MEMORY

BLUE

YELLOW

GREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAY

RETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A

ZONE B

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

BLUETOOTH

NET

USB

FM/AM

INPU T

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

POP-UP/MENU

P-UP

HOME

TOTO

P MENU

P ME

DISPLA

DISPLADISPLA

RETURN

ENTER

SETU

MUTE

OPTION

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

STEREO

TUNED

VOL .

Input Select

Front display

TV screen

Use the cursor keys to select an item and press ENTER.

Use the cursor keys to select a setting.

Press OPTION.

This completes the settings.

NOTE

For details on the default settings, see the following:

▪ “Default settings of the Option menu” (p.157)

Option menu items

Use the following table to configure playback settings of the unit.

NOTE

▪ Available items vary depending on the selected input source.

▪ Text in parentheses denotes indicators on the front display.

▪ Depending on the region of purchase, some menu items for audio streaming services are also available.

Item Function Page

Input Select (

Input Select)

Switches the input source. p.79

Tone Control (

Tone Control)

Adjusts the level of high-frequency range and low-

frequency range individually.

p.79

DSP/Surround

(DSP/

Surround)

Program (PRG)

Select the sound programs and stereo playback. p.79

Sur.Decode

(SrDec)

Selects a surround decoder to be used. p.81

DSP Level

(DSP Level)

Adjusts the sound field effect level. p.81

Adaptive DRC

(A.DRC)

Sets whether the dynamic range (from maximum to

minimum) is automatically adjusted to the volume.

p.81

Enhancer

(Enhancer)

Enables/disables Compressed Music Enhancer. p.82

Volume Trim

(Volume Trim)

Input Trim

(In.Trim)

Corrects volume differences between input sources. p.82

Subwoofer Trim

(SW.Trim)

Fine-adjusts the subwoofer volume. p.82

ZoneB Trim

(ZB.Trim)

Corrects volume differences between Zone A/B. p.82

Lipsync (Lipsync)

Enables/disables the “Lipsync” setting in the “Setup”

menu.

p.82

Signal Information

(

Signal Info.)

Displays information about the video/audio signals. p.83

Audio In (Audio In)

Combines the video of the selected input source with

the audio of a different input source.

p.83

Video Out (Video Out)

Selects a video source to be output together with the

selected audio source.

p.84

FM Mode (FM Mode)

Switches between “Stereo” and “Monaural” for FM

radio reception.

p.84

Item Function Page

Preset (Preset)

Auto Preset

(

AUTO)

Automatically registers FM radio stations with strong

signals as presets.

p.85

Clear Preset

(CLEAR)

Clear radio stations registered to preset numbers. p.85

Traffic Program

(TrafficProgram)

(U.K., Europe, Russia and Middle East models only)

Automatically searches for a traffic information

station.

p.86

Shuffle (Shuffle)

Configures the shuffle setting. p.86

Repeat

(Repeat)

Configures the repeat setting. p.87

Volume Interlock

(Vol.Interlock)

Enables/disables volume control from iTunes/iPhone

via AirPlay.

p.87

Add to favorites (

Add to Fav.)

Remove from favorites

(RemovefromFav.)

Adds your favorite Internet radio station to the

“Favorites

” folder, or removes it from the “

Favorites”

folder.

p.87

Init Scan (Init Scan)

(RX-D485 only)

Performs an initial scan for DAB radio reception.

p.88

Tune AID (Tune AID)

(RX-D485 only)

Checks reception strength of each DAB channel.

p.88

Switching the input source

Switches the input source. Press ENTER to switch to the selected input source.

Option menu

“Input Select”

Adjusting the tone of the audio output

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)

individually.

Option menu

“Tone Control”

Choices

Treble, Bass

Setting range

-6.0 dB to +6.0 dB (0.5 dB increments)

NOTE

▪ When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.

▪ You can also adjust the tone with the front panel controls. Press TONE CONTROL to select “Treble” or

“Bass”, then press PROGRAM to make an adjustment.

▪ If you set an extreme value, sounds may not match those from other channels.

Configuring DSP/Surround

Selecting sound programs

Select sound programs and stereo playback.

NOTE

You can select a sound program by pressing PROGRAM.

Option menu

“DSP/Surround” > “Program”

MUSIC

Hall in Munich

This program simulates a Munich concert hall with approximately 2,500

seats that uses stylish wood for the interior finishing. Fine, beautiful

reverberations spread richly, creating a calming atmosphere. The

listener’s virtual seat is at the center left of the arena.

Hall in Vienna

This program simulates a 1700-seat, middle-sized concert hall with a

shoebox shape that is traditional in Vienna. Pillars and ornate carvings

create extremely complex reverberations from all around the audience,

producing a very full, rich sound.

Chamber

This program creates a relatively wide space with a high ceiling, like an

audience hall in a palace. It offers pleasant reverberations that are

suitable for courtly music and chamber music.

Cellar Club

This program simulates an intimate concert venue with a low ceiling and

homey atmosphere. A realistic, live sound field delivers powerful sounds

that make you feel as if you are sitting in the front row in front of a small

stage.

The Roxy Theatre

This program creates the sound field of a 460-seat rock music concert

venue in Los Angeles. The listener’s virtual seat is at the center left of the

hall.

The Bottom Line

This program creates the sound field at stage front in The Bottom Line, a

famous New York jazz club once. The floor can seat 300 people to the

left and right in a sound field offering real and vibrant sound.

MOVIE

Sports

This program allows listeners to enjoy the rich vividness of sport

broadcasts and light entertainment programs. In sports broadcasts, the

commentators’ voices are positioned clearly at the center, while the

atmosphere inside the stadium is realistically conveyed by the peripheral

delivery of the sounds of the fans in a suitable space.

Action Game

This program is suitable for action games, such as car racing and

fighting games. The reality of, and emphasis on, various effects makes

the player feel like they are right in the middle of the action, allowing for

greater concentration. Use this program in combination with Compressed

Music Enhancer for a more dynamic and strong sound field.

Roleplaying Game

This program is suitable for role-playing and adventure games. This

program adds depth to the sound field for natural and realistic

reproduction of background music, special effects, and dialogue from a

wide variety of scenes. Use this program in combination with

Compressed Music Enhancer for a clearer and more spatial sound field.

Music Video

This program allows you to enjoy videos of pop, rock, and jazz concerts,

as if you were there yourself. Immerse yourself in the hot concert

atmosphere thanks to the vividness of the singers and solos on stage, a

presence sound field that emphasizes the beat of rhythm instruments,

and a surround sound field that reproduces the space of a big live hall.

Standard

This program creates a sound field that emphasizes the surround feeling

without disturbing the original acoustic positioning of multichannel audio.

Its design is based on the concept of the ideal movie theater, in which

the audience is surrounded by beautiful reverberations from the left,

right, and rear.

Spectacle

This program delivers the scale and grandeur of spectacular movie

productions. It delivers an expansive sound space to match the

cinemascope wide-screen, and boasts a broad dynamic range,

providing everything from small delicate sounds to powerful loud booms.

Sci-Fi

This program clearly reproduces the finely elaborated sound design of

the latest Sci-Fi and SFX movies. You can enjoy a variety of

cinematographically created virtual spaces reproduced with clear

separation between dialogue, sound effects, and background music.

Adventure

This program is ideal for reproducing the sound design of action and

adventure movies precisely. The sound field restrains reverberations, but

puts emphasis on reproducing a sensation of expansiveness on both

sides, powerful space expanded widely to the left and right. The

restrained depth creates a clear and powerful space, while also

maintaining the articulation of the sounds and the separation of the

channels.

Drama

This program features stable reverberations that match a wide range of

movie genres, from serious dramas to musicals and comedies. The

reverberations are modest, but suitably stereophonic. The sound effects

and background music are reproduced with a gentle echo that does not

impinge on the articulation of the dialogue. You’ll never get tired listening

for long periods.

Mono Movie

This program reproduces monaural video sources, such as classic

movies, in an atmosphere of a good old movie theater. The program

creates a pleasant space with depth, by adding breadth and the

appropriate reverberation to the original audio.

STEREO

2ch Stereo

Use this program to mix down multichannel sources to 2 channels. When

multichannel signals are input, they are down mixed to 2 channels and

output from the front speakers (this program does not utilize CINEMA

DSP).

5ch Stereo

Use this program to output sound from all speakers. When you play back

multichannel sources, the unit mixes down the source to 2 channels, and

then outputs the sound from all speakers. This program creates a larger

sound field and is ideal for background music at parties.

UNPROCESSED

Sur.Decode

The surround decoder enables multichannel playback from 2-channel

sources without sound field effects.

Straight

When the straight decode mode is enabled, the unit produces stereo

sound from the front speakers for 2-channel sources such as CDs, and

produces unprocessed multichannel sounds for multichannel sources.

NOTE

For details on “Sur.Decode”, see the following:

▪ “Selecting the surround decoder used in the program” (p.81)

Selecting the surround decoder used in the program

Selects a surround decoder to be used.

NOTE

For details on “Program” in the “Option” menu, see the following:

▪ “Selecting sound programs” (p.79)

Option menu

“DSP/Surround” > “Sur.Decode”

Settings

DPL Movie

Uses the Dolby Pro Logic II decoder suitable for movies.

DPL Music

Uses the Dolby Pro Logic II decoder suitable for music.

DPL Game

Uses the Dolby Pro Logic II decoder suitable for games.

Neo:6 Cinema

Uses the DTS Neo: 6 decoder suitable for movies.

Neo:6 Music

Uses the DTS Neo: 6 decoder suitable for music.

NOTE

▪ For details on each decoder, see the following:

– “Glossary of audio decoding format” (p.144)

▪ You can adjust the surround decoder parameters in “DSP Parameter” in the “Setup” menu. For details,

see the following:

– “Setting the broadening effect of the front sound field” (p.102)

– “Adjusting the broadening effect of the center sound field” (p.102)

– “Adjusting the difference in level between the front and surround sound fields” (p.102)

– “Adjusting the center localization (broadening effect) of the front sound field” (p.102)

Adjusting the sound field effect level

Adjusts the sound field effect level.

Option menu

“DSP/Surround” > “DSP Level”

Setting range

-6 dB to +3 dB (1 dB increments)

Adjusting the dynamic range automatically

Sets whether the dynamic range (from maximum to minimum) is automatically adjusted

when the volume level is adjusted. When it is set to “On”, the dynamic range becomes

narrow at a low volume and wide at a high volume. It is useful for listening to playback

at a low volume at night.

Option menu

“DSP/Surround” > “Adaptive DRC”

Settings

Off The dynamic range is not automatically adjusted.

On Automatically adjusts the dynamic range.

Setting Compressed Music Enhancer

Enables/disables Compressed Music Enhancer.

Option menu

“DSP/Surround” > “Enhancer”

Settings

Off Disables Compressed Music Enhancer.

On Enables Compressed Music Enhancer.

NOTE

▪ This setting is applied separately to each input source.

▪ You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer.

▪ For details on Compressed Music Enhancer, see the following:

– “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.42)

Correcting volume differences during playback

Correcting volume differences between input sources

Corrects volume differences between input sources. If you are bothered by volume

differences when switching between input sources, use this function to correct it.

Option menu

“Volume Trim” > “Input Trim”

Setting range

-6.0 dB to +6.0 dB (0.5 dB increments)

NOTE

This setting is applied separately to each input source.

Adjusting the subwoofer volume

Fine-adjusts the subwoofer volume.

Option menu

“Volume Trim” > “Subwoofer Trim”

Setting range

-6.0 dB to +6.0 dB (0.5 dB increments)

Correcting volume difference between Zone A and

Zone B

If you are bothered by volume difference between Zone A/B, adjust the volume for

Zone B.

Option menu

“Volume Trim” > “ZoneB Trim”

Setting range

-10.0 dB to +10.0 dB (0.5 dB increments)

NOTE

This setting is not effective when “ZoneB Volume” in the “Setup” menu is set to “Async.”. For details, see the

following:

▪ “Adjusting the volume for Zone B in conjunction with the volume for Zone A” (p.105)

Enabling Lipsync adjustment

Enables/disables the adjustment configured in “Lipsync” in the “Setup” menu.

NOTE

For details on “Lipsync” in the “Setup” menu, see the following:

▪ “Setting the adjustment method of the Lipsync function” (p.103)

Option menu

“Lipsync”

Settings

Off Disables the “Lipsync” adjustment.

On Enables the “Lipsync” adjustment.

NOTE

This setting is applied separately to each input source.

Checking information about the video/audio signals

Displays information about the video/audio signals.

Option menu

“Signal Information”

Format Audio format of the input signal

Channel

The number of source channels in the input signal (front/surround/LFE)

For example, “3/2/0.1” means 3 front channels, 2 surround channels, and

LFE.

Sampling The number of samples per second of the input digital signal

Video In Type and resolution of the input digital signal

Video Out Type and resolution of the output digital signal

NOTE

To switch the information on the front display, press the cursor keys.

Combining audio of another input source with video

of the current input source

Select the audio of a different input source to play back together with the video of the

currently selected input source. For example, use this function in the following cases.

• Connecting a playback device that supports HDMI video output, but not HDMI

audio output

Option menu

“Audio In”

Input sources

HDMI 1-4, AV 1-3

Settings

AV 1-3, AUDIO 1-3

Video/audio input jacks available on the unit

Output jacks on video device Input jacks on the unit

Video Audio Video Audio

HDMI

Digital optical HDMI 1–4 AUDIO 1 (OPTICAL)

Digital coaxial HDMI 1–4

AUDIO 2 (COAXIAL)

AV 1 (COAXIAL)

Analog stereo HDMI 1–4

AUDIO 3 (AUDIO)

AV 2–3 (AUDIO)

Composite video Digital optical AV 1–3 (VIDEO) AUDIO 1 (OPTICAL)

Necessary setting

For example, if you have connected a video device to AV 2 (VIDEO) and AUDIO 1

(OPTICAL) jack of the unit, change the combination setting as follows.

VIDEO

OPTICAL

O O

The unit (rear)

AUDIO 1 (OPTICAL) jack

AV 2 (VIDEO) jack

Video output

(composite video)

Audio output

(digital optical)

Set-top box

Press INPUT to select “AV 2” (video input jack to be used) as the

input source.

Press OPTION.

MUTE

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM/AM

VOLUME

PROGR AM

USB

STRAIGHT

ENHANCER BASS

INPU T

DVD

SC ENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

ZONE A ZONE B

NET

BLUETOOTH

MUTE

P MENU

HOME

POP-UP/MENU

DISPLA

DISPLADISPLA

RETURN

SETU

OPTION

ENTER

Cursor keys

Use the cursor keys to select “Audio In” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Audio In

Use the cursor keys to select “AUDIO 1” (audio input jack to be

used).

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Audio•••AUDIO1

Press OPTION.

This completes the necessary settings.

Selecting a video source to be output with the

selected audio source

Selects a video source to be output together with the selected audio source. For

example, you can watch the video from a different source while listening to the radio.

Option menu

“Video Out”

Input sources

AUX, AUDIO 1-3, TUNER, (network sources), AirPlay, MusicCast Link, SERVER, NET

RADIO, Bluetooth, USB

Settings

Off Does not output video.

HDMI 1-4, AV 1-3 Outputs video input through the corresponding video input jacks.

Switching between stereo and monaural for FM radio

reception

Switch between stereo and monaural for FM radio reception. When the signal

reception for an FM radio station is unstable, switching to monaural may improve it.

Option menu

“FM Mode”

Settings

Stereo Enables stereo for FM radio reception.

Monaural Enables monaural for FM radio reception.

Setting presets for radio stations

Registering radio stations automatically

Automatically register FM radio stations with strong signals.

NOTE

▪ You can register up to 40 radio stations as presets.

▪ To register AM radio stations, see the following:

– “Registering a radio station manually” (p.53)

▪ (U.K., Europe, Russia and Middle East models only)

Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function.

Option menu

“Preset” > “Auto Preset”

Press FM/AM to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Preset

The preset number from which to start the registration is displayed on the

front display.

NOTE

To specify the preset number from which to start the registration, press cursor keys or PRESET to

select a preset number.

To start the Auto Preset process, press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

STEREO

TUNED

FPR

SBL SB SBR

FPL

VOL .

01:FM 87.50MHz

“SEARCH” appears during Auto Preset

Preset number from which to start the registration

The Auto Preset process starts and “SEARCH” appears during Auto

Preset.

NOTE

To cancel the Auto Preset process, press RETURN.

When the Auto Preset process finishes, “FINISH” appears on the front display and the

“Option” menu closes automatically.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Auto Preset

Clearing preset stations

Clear radio stations registered to the preset numbers.

Option menu

“Preset” > “Clear Preset”

Press FM/AM to select “TUNER” as the input source.

“TUNER” is selected as the input source and the frequency currently

selected is displayed on the front display.

Press OPTION.

Use the cursor keys to select “Preset” and press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VOL .

Preset

Use the cursor keys to select “CLEAR”.

This step is skipped when clearing DAB radio stations.

Use the cursor keys to select a preset station to be cleared and

press ENTER.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

01:FM 98.50MHz

Preset station to be cleared

If the preset station is cleared, “Cleared” appears and then the next in-use

preset number is displayed.

01:Cleared

Repeat step 5 until all desired preset stations are cleared.

Press OPTION.

This completes the clearing preset stations.

Receiving traffic information automatically

(U.K., Europe, Russia and Middle East models only)

When “TUNER” is selected as the input source, the unit automatically searches for a

traffic information station.

Option menu

“Traffic Program”

When “TUNER” is selected as the input source, press OPTION.

Use the cursor keys to select “Traffic Program” and press ENTER.

The traffic information station search will start in 5 seconds. Press ENTER

again to start the search immediately.

NOTE

▪ To search upward/downward from the current frequency, press the cursor keys while “READY”

is displayed.

▪ To cancel the search, press RETURN.

The following screen appears for about 3 seconds when the search

finishes.

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

PARTY

ZONE

3 B2 A

MUT E VIRTU AL

FPR

SBL SB SBR

FPL

VOL .

STEREO

TUNED

TP FM101.30MHz

Traffic information station (frequency)

NOTE

“TP Not Found” appears for about 3 seconds when no traffic information stations are found.

Configuring the shuffle setting

Configure the shuffle setting for playback.

Option menu

“Shuffle”

Settings

Off Turns off the shuffle function.

On Plays back songs in the current album (folder) in random order.

NOTE

This setting is available only when “USB” or “SERVER” is selected as the input source.

Configuring the repeat setting

Configure the repeat setting for playback.

Option menu

“Repeat”

Settings

Off Turns off the repeat function.

One Plays back the current song repeatedly.

All Plays back all songs in the current album (folder) repeatedly.

NOTE

This setting is available only when “USB” or “SERVER” is selected as the input source.

Enabling volume control via AirPlay

Enables/disables volume control from iTunes/iPhone via AirPlay. When other than “Off”

is set, you can adjust the unit’s volume from the iTunes/iPhone during playback.

Option menu

“Volume Interlock”

Settings

Off Disables volume control from iTunes/iPhone.

Limited

Enables volume control from iTunes/iPhone within the limited range

(-80 dB to -20 dB and mute).

Full

Enables volume control from iTunes/iPhone in the full range

(-80 dB to +16.5 dB and mute).

Adding an Internet radio station to the “Favorites”

folder

Option menu

“Add to favorites”

While listening to Internet radio, press OPTION.

Use the cursor keys to select “Add to favorites” and press

ENTER.

When the registering process finishes, the “Option” menu closes

automatically.

Removing an Internet radio station from the

“Favorites” folder

Remove an Internet radio station from the “Favorites” folder.

Option menu

“Remove from favorites”

Use the cursor keys to select the station to be removed from the

“Favorites” folder.

Press OPTION.

Use the cursor keys to select “Remove from favorites” and press

ENTER.

When the removing process finishes, the “Option” menu closes

automatically.

Performing an initial scan for DAB radio reception

(RX-D485 only)

Perform an initial scan for searching DAB radio stations.

Option menu

“Init Scan”

Press FM/DAB to select the DAB band.

Press OPTION.

Use the cursor keys to select “Init Scan” and press ENTER.

Press ENTER to start an initial scan.

When the initial scan finishes, the unit automatically tunes into the first

DAB radio station as stored in station order.

NOTE

▪ If you perform an initial scan again, the DAB radio stations currently registered to the preset numbers will

be cleared.

▪ If no DAB radio stations are found by an initial scan, press ENTER to start an initial scan again.

Checking reception strength of each DAB channel

label

(RX-D485 only)

You can check reception strength of each DAB channel label.

Option menu

“Tune AID”

Press FM/DAB to select the DAB band.

Press OPTION.

Use the cursor keys to select “Tune AID” and press ENTER.

Use the cursor keys to select the desired DAB channel label.

The reception strength of DAB channel label is displayed in 0 (none) to

100 (best).

Press OPTION.

This completes the checking.

CONFIGURATIONS

Configuring various functions (Setup menu)

Basic operation of the Setup menu

Perform the following basic procedure to operate the “Setup” menu. You can configure

the unit’s various functions with the “Setup” menu.

NOTE

▪ If new firmware is available, the message screen appears.

▪

If new firmware is available, the envelope icon (p) appears in the screen.

▪ For details on firmware updating, see the following:

– “Firmware updates” (p.134)

Press SETUP.

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

P-UP

P MEN

PLAY

RETURN

OPTION

ENTER

SETUP

MUTE

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

PRESET

TUNINGTUNING

MEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

PRESET

TUNING

MEMORY

BLUE

YELLOW

GREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAY

RETURN

OPTION

ENTER

SETUP

MUTE

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A

ZONE B

PRESET

TUNINGTUNING TUNINGTUNING

MEMORYMEMORY

BLUE

YELLOWGREEN

RED

POP-UP/MENU

HOME

TOP MENU

DISPLAYRETURN

OPTION

ENTER

SETUP

MUTE

BLUETOOTH

NET

USB

FM/AM

INPU T

VOLUME

BLUETOOTH

NET

USB

FM/AM

INPU T

PROGR AM

BASS

ENHANCER

DIRECT

STRAIGHT

DVD

SC ENE

RADIO

NET

SLEEP

ZONE A ZONE B

POP-UP/MENU

P-UP

HOME

TOTO

P MENU

P ME

DISPLA

DISPLADISPLA

RETURN

OPTION

ENTER

MUTE

SETUP

Use the cursor keys to select a menu and press ENTER.

Use the cursor keys to select an item and press ENTER.

Use the cursor keys to select a setting and press ENTER.

Press SETUP.

This completes the settings.

NOTE

For details on the default settings, see the following:

▪ “Default settings of the Setup menu” (p.157)

Setup menu items

Use the following table to configure various functions of the unit.

Menu Item Function Page

Speaker

Configuration

Power Amp Assign

Selects a speaker system. p.93

Subwoofer

Selects whether or not a subwoofer is connected. p.93

Front

Selects the size of the front speakers. p.94

Center

Selects whether or not a center speaker is connected and its size. p.94

Surround

Selects whether or not surround speakers are connected and their size. p.95

Crossover

Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. p.95

Subwoofer Phase

Sets the phase of the subwoofer. p.96

Extra Bass

Enables/disables Extra Bass. p.96

Virtual CINEMA FRONT

Enables/disables the front 5-channel speaker (Virtual CINEMA FRONT) configuration. p.96

Distance

Sets the distance between each speaker and the listening position. p.96

Level

Adjusts the volume of each speaker. p.97

Equalizer

Adjusts the tone with an equalizer. p.97

Test Tone

Enables/disables the test tone output. p.98

HDMI

HDMI Control

Enables/disables HDMI Control. p.99

Audio Output

Enables/disables audio output from a TV. p.99

Standby Through

Selects whether to output video/audio (input through HDMI jacks) to the TV when the unit is in standby mode. p.99

4K Upscaling

Enables/disables the upscaling function. p.99

HDCP Version

Selects the version of HDCP used on the HDMI input jacks. p.100

TV Audio Input

Selects an audio input jack of the unit to be used for TV audio input. p.100

Standby Sync

Selects whether to use HDMI control to link the standby behavior of the TV and the unit. p.100

ARC

Enables/disables ARC. p.100

SCENE

Enables/disables SCENE link playback. p.101

Menu Item Function Page

Sound

DSP Parameter

Panorama

Enables/disables the broadening effect of the front sound field. p.102

Center Width

Adjusts the broadening effect of the center sound field. p.102

Dimension

Adjusts the difference in level between the front and surround sound fields. p.102

Center Image

Adjusts the center localization (broadening effect) of the front sound field. p.102

Monaural Mix

Enables/disables monaural sound output. p.103

Lipsync

Select

Selects the method to adjust the delay between video and audio output. p.103

Adjustment

Adjusts the delay between video and audio output manually. p.103

Dialogue Dialogue Level

Adjusts the volume of dialogue sounds. p.103

Volume

Scale

Switches the scale of the volume display. p.104

Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. p.104

Max Volume

Sets the limit value of the volume. p.104

Initial Volume

Sets the initial volume for when this receiver is turned on. p.104

ZoneB Volume

Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A. p.105

ECO

Auto Power Standby

Set the amount of time for the auto-standby function. p.106

ECO Mode

Enables/disables the eco mode (power saving mode). p.106

Function

Input Rename

Changes the input source name displayed on the front display. p.107

Input Skip

Set which input sources are skipped when operating the INPUT key. p.108

Dimmer

Adjusts the brightness of the front display. p.108

Memory Guard

Prevents accidental changes to the settings. p.108

Remote Color Key

Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control. p.109

Network

Information

Displays the network information of the unit. p.110

Network Connection

Selects the network connection method. p.110

IP Address

Configures the network parameters (such as IP address). p.110

MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices. p.111

DMC Control

Selects whether to allow a Digital Media Controller (DMC) to control playback. p.112

Network Standby

Selects whether to enable/disable the function that turns on the unit from other network devices. p.112

Network Name

Edits the network name (the unit’s name on the network) displayed on other network devices. p.113

MusicCast Link Power Interlock

Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the

power of other devices of the network.

p.113

Network Update

Updates the firmware via the network. p.113

Menu Item Function Page

Bluetooth

Enables/disables the Bluetooth functions. p.114

Audio Receive

Disconnect

Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. p.114

Bluetooth Standby

Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). p.114

Audio Send

Transmitter

Enables/disables the Bluetooth audio transmitter function. p.115

Device Search

Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter. p.115

Language

Select an on-screen menu language. p.116

Configuring the speaker settings

Setting your speaker system

Select the setting according to the speakers that are connected.

Setup menu

“Speaker” > “Configuration” > “Power Amp Assign”

Settings

Surround

Select this option when you use a normal speaker system (not using Zone

B speakers or a bi-amp connections).

BI-AMP

Select this option when you connect front speakers that support bi-amp

connections.

Zone B

Select this option when you use Zone B speakers in addition to the

speaker system in the main zone (Zone A).

NOTE

For details on the speaker system, see the following:

▪ “Speaker systems and speakers to be connected” (p.17)

▪ “Connecting front speakers that support bi-amp connections” (p.23)

▪ “Playing back music in multiple rooms” (p.43)

Setting the use of a subwoofer

Selects the setting according to the use of your subwoofer.

Setup menu

“Speaker” > “Configuration” > “Subwoofer”

Settings

Use

Select this option when a subwoofer is connected.

The subwoofer will produce LFE (low-frequency effect) channel audio and

low-frequency components from other channels.

None

Select this option when no subwoofer is connected.

The front speakers will produce LFE (low-frequency effect) channel audio

and low-frequency components from other channels.

Setting the size of the front speakers

Selects the setting according to the size of your front speakers.

Setup menu

“Speaker” > “Configuration” > “Front”

Settings

Small

Select this option for small speakers.

The subwoofer will produce front channel low-frequency components

(configurable in “

Crossover

”).

Large

Select this option for large speakers.

The front speakers will produce all of the front channel frequency

components.

NOTE

▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your

speaker is 16 cm (6‑1/4”) or larger, or “Small” if it is smaller than 16 cm (6‑

1/4”).

▪ “Front” is automatically set to “Large” when “Subwoofer” is set to “None”. For details on “Subwoofer” in the

“Setup” menu, see the following:

– “Setting the use of a subwoofer” (p.93)

Setting the use of a center speaker and its size

Selects the setting according to the use and size of your center speaker.

Setup menu

“Speaker” > “Configuration” > “Center”

Settings

Small

Select this option for small speakers.

The subwoofer or front speakers will produce center channel low-

frequency components (configurable in “

Crossover”).

Large

Select this option for large speakers.

The center speaker will produce all of the center channel frequency

components.

None

Select this option when no center speaker is connected.

The front speakers will produce center channel audio.

NOTE

When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your

speaker is 16 cm (6.1/4”) or larger, or “Small

” if it is smaller than 16 cm (6.1/4”).

Setting the use of surround speakers and their size

Selects the setting according to the use and size of your surround speakers.

Setup menu

“Speaker” > “Configuration” > “Surround”

Settings

Small

Select this option for small speakers.

The subwoofer or front speakers will produce surround channel low-

frequency components (configurable in “

Crossover”).

Large

Select this option for large speakers.

The surround speakers will produce all of the surround channel frequency

components.

None

Select this option when no surround speakers are connected.

The front speakers will produce surround channel audio. Virtual CINEMA

DSP works in this case.

NOTE

▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your

speaker is 16 cm (6.1/4”) or larger, or “Small

” if it is smaller than 16 cm (6.1/4”).

▪ For details on Virtual CINEMA DSP, see the following:

– “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.39)

Setting the crossover frequency of the low-frequency

components

Sets the lower limit of the low-frequency components that can be output from a

speaker whose size is set to “Small”. A frequency sound lower than the specified value

will be produced from the subwoofer or front speakers.

Setup menu

“

Speaker” > “Configuration” > “Crossover”

Settings

40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz

NOTE

If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and

crossover frequency to maximum.

Setting the phase of the subwoofer

Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch

the subwoofer phase.

Setup menu

“Speaker” > “Configuration” > “Subwoofer Phase”

Settings

Normal Does not reverse the subwoofer phase.

Reverse Reverses the subwoofer phase.

NOTE

This setting is not available when “Subwoofer” is set to “None”. For details on “Subwoofer” in the “Setup”

menu, see the following:

▪ “Setting the use of a subwoofer” (p.93)

Setting the use of Extra Bass

Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced

bass sounds, regardless of the size of the front speakers and the presence or

absence of the subwoofer.

Setup menu

“Speaker” > “Configuration” > “Extra Bass”

Settings

Off Disables Extra Bass.

On Enables Extra Bass.

NOTE

You can also use BASS on the remote control to enable/disable Extra Bass.

Setting the use of Virtual CINEMA FRONT

Selects whether to use Virtual CINEMA FRONT.

NOTE

Select “On” only when utilizing the Virtual CINEMA FRONT configuration. For details, see the following:

▪ “Using Virtual CINEMA FRONT” (p.22)

Setup menu

“Speaker” > “Configuration” > “Virtual CINEMA FRONT”

Settings

Off Disables Virtual CINEMA FRONT

On Enables Virtual CINEMA FRONT

NOTE

This setting is not available when “Surround” is set to “None”. For details on “Surround” in the “Setup” menu,

see the following:

▪ “Setting the use of surround speakers and their size” (p.95)

Setting the distance between each speaker and the

listening position

Sets the distance between each speaker and the listening position so that sounds from

the speakers reach the listening position at the same time.

Setup menu

“Speaker” > “Distance”

Choices

Front L, Front R, Center, Surround L, Surround R, Subwoofer

Setting range

0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments

NOTE

Select the unit of distance from “Meter” or “Feet” in “Unit”.

Adjusting the volume of each speaker

Adjusts the volume of each speaker to suit your listening position.

Setup menu

“Speaker” > “Level”

Choices

Front L, Front R, Center, Surround L, Surround R, Subwoofer

Setting range

-10.0 dB to +10.0 dB (0.5 dB increments)

NOTE

Test tone output helps you to adjust the speaker balance while confirming its effect. For details, see the

following:

▪ “Outputting test tones” (p.98)

Setting the equalizer

Selects the type of equalizer to be used and adjusts the tone.

Setup menu

“Speaker” > “Equalizer” > “EQ Select”

Settings

PEQ

Applies the parametric equalizer values obtained by the YPAO

measurement.

GEQ Select this option when you want to adjust the equalizer manually.

Off Does not use the equalizer.

When selecting “GEQ”

Use the cursor keys to select “Channel” and to select the desired

speaker channel.

Use the cursor keys to select the desired band (frequency) and to

adjust the gain.

Setting range

-6.0 dB to +6.0 dB

Press SETUP.

This completes the settings.

NOTE

▪ Test tone output helps you to adjust the equalizer while confirming its effect. For details, see the following:

– “Outputting test tones” (p.98)

▪ “PEQ” is available only when the YPAO has been performed. For details on the YPAO, see the following:

– “Optimizing the speaker settings automatically (YPAO)” (p.33)

Outputting test tones

Enables/disables the test tone output. Test tone output helps you to adjust the speaker

balance or equalizer while confirming its effect.

Setup menu

“Speaker” > “Test Tone”

Settings

Off Does not output test tones.

Outputs test tones automatically when you adjust the speaker balance or

equalizer.

Configuring the HDMI settings

Setting the use of HDMI Control

Enables/disables HDMI Control. HDMI Control allows you to operate external devices

via HDMI.

Setup menu

“HDMI” > “HDMI Control”

Settings

Off Disables HDMI Control.

Enables HDMI Control.

Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”, and

“SCENE”.

NOTE

To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Control-

compatible devices. For details, see the following:

▪ “HDMI Control and synchronized operations” (p.148)

Setting the output of HDMI audio from the TV

speaker

Enables/disables audio output from a TV connected to the HDMI OUT jack when

“HDMI Control” is set to “Off”.

NOTE

For details on “HDMI Control” in the “Setup” menu, see the following:

▪ “Setting the use of HDMI Control” (p.99)

Setup menu

“HDMI” > “Audio Output”

Settings

Off Disables audio output from the TV.

On Enables audio output from the TV.

Setting the use of HDMI Standby Through

Select whether to output video/audio (input through HDMI jacks) to the TV when the

unit is in standby mode.

NOTE

If this function is set to “On” or “Auto”, you can use the input selection keys (HDMI 1–4) to select an HDMI

input even when the unit is in standby mode (the standby indicator on the unit blinks).

Setup menu

“HDMI” > “Standby Through”

Settings

Off Does not output video/audio to the TV.

Auto

Automatically selects whether to output video/audio depending on the

status of the connected device.

Outputs video/audio to the TV.

(The unit consumes more power than when “

Off

” or “Auto” is selected.)

NOTE

▪ “Off” is not selectable when “HDMI Control” is set to “On”.

▪ For details on “HDMI Control” in the “Setup” menu, see the following:

– “Setting the use of HDMI Control” (p.99)

Setting the use of 4K upscaling of the HDMI video

signal

Enables/disables the upscaling function. When it is enabled, 1080p content is

displayed at 4K resolution.

Setup menu

“HDMI” > “4K Upscaling”

Settings

Off Disables the upscaling function.

On Enables the upscaling function.

Setting the version of HDCP used on the HDMI input

jacks

Selects the HDCP version of the HDMI input jacks for watching 4K video content.

Setup menu

“HDMI” > “HDCP Version”

Input sources

HDMI 1–4

Settings

Auto Automatically sets the version of HDCP according to content.

1.4 Sets the version of HDCP to always be 1.4.

Setting the audio jack used for TV audio input

Selects an audio input jack of the unit to be used for TV audio input when “HDMI

Control

” is set to “

On”. The unit’s input source automatically switches to TV audio when

the TV input is switched to its built-in tuner.

NOTE

For details on “HDMI Control” in the “Setup” menu, see the following:

▪ “Setting the use of HDMI Control” (p.99)

Setup menu

“HDMI” > “TV Audio Input”

Settings

AV 1–3, AUDIO 1–3

NOTE

When using ARC to input TV audio to the unit, the input jacks selected here will be used for TV Audio Input.

Linking the standby modes of the unit and the TV

Select whether to use HDMI control to link the unit's standby mode to the TV's power

when “HDMI Control” is set to “On”.

NOTE

For details on “HDMI Control” in the “Setup” menu, see the following:

▪ “Setting the use of HDMI Control” (p.99)

Setup menu

“HDMI” > “Standby Sync”

Settings

Off Does not set the unit to standby mode when the TV is turned off.

On Sets the unit to standby mode when the TV is turned off.

Auto

Sets the unit to standby mode when the TV is turned off only when the unit

is receiving TV audio or HDMI signals.

Setting the use of ARC

Select whether to output TV audio to the speakers connected to the unit when “HDMI

Control” is set to “

On”.

NOTE

For details on “HDMI Control” in the “Setup” menu, see the following:

▪ “Setting the use of HDMI Control” (p.99)

Setup menu

“HDMI” > “ARC”

Settings

Off Disables ARC.

On Enables ARC.

NOTE

You do not need to change this setting normally. In case noises are produced from the speakers connected

to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off”

and use the TV’s speakers.

100

Setting the use of SCENE link playback

Enables/disable SCENE link playback when “HDMI Control” is set to “On”.

When SCENE link playback is enabled, HDMI Control-compatible devices connected

to the unit via HDMI automatically work as follows when a scene is selected.

• TV: turning on and displaying video from the playback device

• Playback device: starting playback

NOTE

For details on “HDMI Control” in the “Setup” menu, see the following:

▪ “Setting the use of HDMI Control” (p.99)

Setup menu

“HDMI” > “SCENE”

Choices (SCENE keys)

BD / DVD, TV, NET, RADIO

Settings

Off Disables SCENE link playback for the selected SCENE key.

On Enables SCENE link playback for the selected SCENE key.

NOTE

SCENE link playback may not work properly due to the compatibility between devices. We recommend using

TV and playback devices from the same manufacturer so that HDMI Control works more effectively.

101

Configuring the sound settings

Setting the broadening effect of the front sound field

Enables/disables the broadening effect of the front sound field. When this function is

enabled, you can wrap front left/right channel sounds around the sound field and

generate a spacious sound field in combination with the surround sound field. This

setting is effective when “DPL Music” is selected.

Setup menu

“

Sound” > “DSP Parameter” > “Panorama”

Settings

Off Disables the broadening effect of the front sound field.

On Enables the broadening effect of the front sound field.

NOTE

For details on the surround decoder, see the following:

▪ “Selecting the surround decoder used in the program” (p.81)

Adjusting the broadening effect of the center sound

field

Adjusts the broadening effect of the center sound field. Higher to enhance the

broadening effect, and lower to reduce it (closer to center). This setting is effective

when “DPL Music” is selected.

Setup menu

“

Sound” > “DSP Parameter” > “Center Width”

Setting range

0 to 7

NOTE

For details on the surround decoder, see the following:

▪ “Selecting the surround decoder used in the program” (p.81)

Adjusting the difference in level between the front

and surround sound fields

Adjusts the difference in level between the front and surround sound fields. Higher to

strengthen the front sound field and lower to strengthen the surround sound field. This

setting is effective when “DPL Music” is selected.

Setup menu

“

Sound” > “DSP Parameter” > “Dimension”

Setting range

-3 to +3

NOTE

For details on the surround decoder, see the following:

▪ “Selecting the surround decoder used in the program” (p.81)

Adjusting the center localization (broadening effect)

of the front sound field

Adjusts the center localization (broadening effect) of the front sound field. Adjust this

higher to strengthen the center localization (less broadening effect) or lower to weaken

it (more broadening effect). This setting is effective when “Neo:6 Music

” is selected.

Setup menu

“Sound” > “DSP Parameter” > “Center Image”

Setting range

0.0 to 1.0

NOTE

For details on the surround decoder, see the following:

▪ “Selecting the surround decoder used in the program” (p.81)

102

Setting the use of Monaural Mix

Enables/disables monaural sound output. This function can be applicable when the

sound program is set to “5ch Stereo” only.

Setup menu

“Sound” > “DSP Parameter” > “Monaural Mix”

Settings

Off Disables monaural sound output.

On Enables monaural sound output.

Setting the adjustment method of the Lipsync

function

Selects the method for adjusting the delay between video and audio output.

Setup menu

“Sound” > “Lipsync” > “Select”

Settings

Manual

Select this option when you want to adjust the delay between video and

audio output manually.

Adjust the audio output timing in “Adjustment”.

Auto

Adjusts the delay between video and audio output automatically when a

TV that supports an automatic lipsync function is connected to the unit via

HDMI.

If necessary, you can fine-adjust the audio output timing in “Adjustment”.

NOTE

▪ You can enable/disable the Lipsync function by input sources in “Lipsync” in the “Option” menu. For

details, see the following:

– “Enabling Lipsync adjustment” (p.82)

▪ For details on “Adjustment” in the “Setup” menu, see the following:

– “Adjusting the delay of the Lipsync function” (p.103)

Adjusting the delay of the Lipsync function

Adjusts the delay between video and audio output manually when “Select” is set to

“Manual”. You can fine-adjust the audio output timing when “

Select” is set to “Auto”.

Setup menu

“Sound” > “Lipsync” > “Adjustment”

Setting range

0 ms to 500 ms (1 ms increments)

NOTE

For details on “Select” in the “Setup” menu, see the following:

▪ “Setting the adjustment method of the Lipsync function” (p.103)

Adjusting the volume of dialogue sound

Adjusts the volume of dialogue sounds that are hardly heard.

Setup menu

“Sound” > “Dialogue” > “Dialogue Level”

Setting range

0 to 3 (higher to strengthen)

103

Setting the scale of the volume display

Switches the scale of the volume display.

Setup menu

“Sound” > “Volume” > “Scale”

Settings

dB Displays the volume in the “dB” unit.

0-97 Displays the volume in the numeric value (0.5 to 97.0).

Setting the dynamic range adjustment method

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and

DTS signals) playback.

Setup menu

“Sound” > “Volume” > “Dynamic Range”

Settings

Maximum Produces audio without adjusting the dynamic range.

Standard Optimizes the dynamic range for regular home use.

Min/Auto

Sets the dynamic range for clear sound even at night or at low volumes.

When playing back Dolby TrueHD signals, the dynamic range is

automatically adjusted based on the input signal information.

Setting the limit value of the volume

Sets the limit value of the volume adjusted by using such as VOLUME keys on the

remote control.

Setup menu

“Sound” > “Volume” > “Max Volume”

Setting range

-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.0 to 95.0 (5.0 increments),

97.0]

Setting the initial volume for when the unit is turned

Sets the initial volume when the unit is turned on.

Setup menu

“Sound” > “Volume” > “Initial Volume”

Settings

Off

Sets the level to the volume level of the unit when it last entered standby

mode.

Mute Sets the unit to mute the audio output.

-80.0 dB to +16.5 dB

(0.5 dB increments)

[0.5 to 97.0

(0.5 increments)]

Sets the level to the specified volume level.

NOTE

This setting works only when the volume level is set lower than “Max Volume”. For details on “Max Volume” in

the “Setup” menu, see the following:

▪ “Setting the limit value of the volume” (p.104)

104

Adjusting the volume for Zone B in conjunction with

the volume for Zone A

Selects whether to adjust the volume for Zone B in conjunction with the volume for

Zone A.

Setup menu

“Sound” > “Volume” > “ZoneB Volume”

Settings

Sync. Adjusts the volume for Zone B in conjunction with the volume for Zone A.

Async.

Does not adjust the volume for Zone B in conjunction with the volume for

Zone A. Adjust the volume for Zone B separately.

NOTE

If “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB. As necessary, adjust

the volume using the remote control. For details, see the following:

▪ “Adjusting the volume for Zone B separately” (p.45)

105

Configuring the power supply settings

Setting the amount of time for the auto-standby

function

Set the amount of time for the auto-standby function.

Setup menu

“ECO” > “Auto Power Standby”

Settings

Off Does not set the unit to standby mode automatically.

5 minutes, 20 minutes

Sets the unit to standby mode when you have not operated the unit and

the unit has not detected any input signal for the specified time.

2 hours, 4 hours,

8 hours, 12 hours

Sets the unit to standby mode when you have not operated the unit for the

specified time.

NOTE

Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front

display.

Setting the use of the eco mode

You can reduce the unit’s power consumption by setting the eco mode to “On”. After

changing the setting, be sure to press ENTER to restart the unit.

When the eco mode is enabled, you can reduce the unit’s power consumption.

Setup menu

“

ECO” > “ECO Mode”

Settings

Off Disables the eco mode.

On Enables the eco mode.

NOTE

▪ When “ECO Mode” is set to “On”, the front display may become dark.

▪ If you want to play audio at high volume, set “ECO Mode” to “Off”.

106

Configuring the function settings

Automatically changing the input source names

displayed on the front display

Automatically changes the input source names displayed on the front display. You can

select a name created by the Auto Rename function.

Setup menu

“Function” > “Input Rename”

Input sources

HDMI 1-4, AV 1-3, AUDIO 1-2

Use the cursor keys to select an input source to be renamed.

Use the cursor keys to select “Auto”.

To change another input source name, repeat steps 1 to 2.

Press SETUP.

This completes the settings.

NOTE

When “Auto” is selected, the created name is saved even after the external device is disconnected. To reset

to the default setting, switch the setting to “Manual

” and then back to “Auto”.

Manually changing the input source names

displayed on the front display

Allows the input source names displayed on the front display to be set manually.

Setup menu

“Function” > “Input Rename”

Input sources

HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, TUNER, MusicCast Link, SERVER, NET RADIO,

USB

Use the cursor keys to select an input source to be renamed.

Use the cursor keys to select “Manual” and press ENTER.

The edit screen is displayed.

Use the cursor keys and ENTER key to edit the name, and then

select “OK” and press ENTER.

NOTE

▪ To cancel the entry, select “CANCEL”.

▪ If you select "RESET", the default input name will be inserted into the editing area.

To change another input source name, repeat steps 1 to 3.

Press SETUP.

This completes the settings.

107

Setting input sources to be skipped when operating

the INPUT key

Set which input sources are skipped when operating the INPUT key.

You can select the desired input source quickly by using this function.

Setup menu

“Function” > “Input Skip”

Input sources

HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, TUNER, NET, Bluetooth, USB

Settings

Off Does not skip the selected input source.

On Skips the selected input source.

NOTE

When using AV CONTROLLER, you cannot select the input sources set to “On” in this function.

Adjusting the brightness of the front display

Adjusts the brightness of the front display.

Setup menu

“Function” > “Dimmer”

Setting range

-4 to 0 (higher to brighten)

NOTE

The front display may become dark when “ECO Mode” is set to “On”. For details, see the following:

▪ “Setting the use of the eco mode” (p.106)

Preventing accidental changes to the settings

Prevents accidental changes to the settings.

Setup menu

“Function” > “Memory Guard”

Settings

Off Does not protect the settings.

On Protects the settings until “Off” is selected.

NOTE

When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.

108

Setting the unit's functions for the RED/GREEN/

YELLOW/BLUE keys of the remote control

Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.

Setup menu

“Function” > “Remote Color Key”

Settings

Default

Assigns the functions of devices connected to the unit with an HDMI

cable.

This setting is effective when “HDMI Control” is set to “On”.

Input

Assigns the unit's input sources to each key. The assigned input sources

can be set separately.

Input sources

HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, TUNER, NET, Bluetooth, USB

Default

RED: HDMI2, GREEN: HDMI4, YELLOW: AV 2, BLUE: AUX

Program

Assigns the functions of sound mode to each key.

RED: MOVIE

GREEN: MUSIC

YELLOW: STEREO

BLUE: SUR.DECODE

TV Control

Assigns the functions of TV Control to each key.

RED: EXIT (closes the menu on the TV)

GREEN: INFO (displays information about the TV such as the resolution)

YELLOW: BROADCAST (switches the TV broadcast type)

BLUE: INPUT (switches the TV input)

This setting is effective when “HDMI Control” is set to “On”.

NOTE

▪ For details on “HDMI Control” in the “Setup” menu, see the following:

– “Setting the use of HDMI Control” (p.99)

▪ To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Control-

compatible devices. For details, see the following:

– “HDMI Control and synchronized operations” (p.148)

▪ HDMI Control might not work properly.

109

Configuring the network settings

Checking the network information of the unit

Displays the network information of the unit.

Setup menu

“Network” > “Information”

Status The connection status of the NETWORK jack

Connection Connection method

SSID The access point to which the unit is connected

MusicCast Network Readiness or not for the MusicCast Network

MAC Address (Ethernet)

MAC address

MAC Address (Wi-Fi)

IP Address IP address

Subnet Mask Subnet mask

Default Gateway The IP address of the default gateway

DNS Server (P) The IP address of the primary DNS server

DNS Server (S) The IP address of the secondary DNS server

Setting the network connection method (Wired/

Wireless)

Selects the network connection method.

Setup menu

“Network” > “Network Connection”

Choices

Wired

Select this option when you want to connect the unit to a network with

a commercially-available network cable.

Wireless(Wi-Fi)

Select this option when you want to connect the unit to a network via

the wireless router (access point).

NOTE

For details on the network connection, see the following:

▪ “Preparing for connecting to a network” (p.29)

Setting the network parameters automatically

(DHCP)

Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)

automatically using a DHCP server.

Setup menu

“Network” > “IP Address” > “DHCP”

Settings

Off Does not use a DHCP server. Configure the network parameters manually.

Uses a DHCP server to automatically obtain the unit’s network parameters

(such as IP address).

110

Setting the network parameters manually

Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)

manually.

Setup menu

“Network” > “IP Address”

Set “DHCP” to “Off”.

Use the cursor keys to select a parameter type.

IP Address Specifies an IP address.

Subnet Mask Specifies a subnet mask.

Default Gateway Specifies the IP address of the default gateway.

DNS Server (P) Specifies the IP address of the primary DNS server.

DNS Server (S) Specifies the IP address of the secondary DNS server.

Use the cursor keys to move the edit position and to select a

value.

To set another parameter, press RETURN and repeat steps 2 to 3.

Press SETUP.

This completes the settings.

Setting the MAC address filter

Sets the MAC address filter to limit access to the unit from other network devices.

NOTE

▪ Operation of the AirPlay function or the DMC is not limited by this setting.

▪ You can specify up to 10 network devices that are permitted to access the unit.

Setup menu

“Network” > “MAC Address Filter” > “Filter”

Settings

Off Disables the MAC address filter.

Enables the MAC address filter. Specify the MAC addresses of the

network devices that will be permitted access to the unit.

When selecting “On”

Use the cursor keys to select an MAC address number.

Use the cursor keys to move the edit position and to select a

value.

To specify another MAC address, press RETURN and repeat steps

1 to 2.

Press SETUP.

This completes the settings.

111

Setting the use of a Digital Media Controller

Selects whether to allow a Digital Media Controller (DMC) to control playback. A Digital

Media Controller (DMC) is a device that can control other network devices through the

network. When this function is enabled, you can control playback of the unit from

DMCs (such as Windows Media Player 12) on the same network.

Setup menu

“Network” > “DMC Control”

Settings

Disable Does not allow DMCs to control playback.

Enable Allows DMCs to control playback.

Setting the use of the Network Standby function

Selects whether the unit can be turned on from other network devices (network

standby).

Setup menu

“Network” > “Network Standby”

Settings

Off Disables the network standby function.

Enables the network standby function.

(The unit consumes more power than when “Off” is selected.)

Auto

Enables the network standby function.

(If “Network Connection” is set to “Wired”, the unit is set to the power

saving mode when the network cable is disconnected.)

With an advanced energy saving design, this product achieves a low power

consumption of not more than two watts when in Network Standby mode.

112

Setting the network name of the unit

Edits the network name (the unit’s name on the network) displayed on other network

devices.

Setup menu

“Network” > “Network Name”

Press ENTER to enter the name edit screen.

Use the cursor keys and ENTER key to edit the name.

Select “OK” to confirm the new name and press ENTER.

Press SETUP.

This completes the settings.

Setting the power interlock from the unit to

MusicCast compatible devices

Selects whether turning on the power of the master device of the MusicCast network

(this unit) also turns on the power of other devices of the network.

Setup menu

“Network” > “MusicCast Link Power Interlock”

Settings

Off Disables the power interlock from the unit (MusicCast master).

On Enables the power interlock from the unit (MusicCast master).

Updating the firmware via the network

Updates the firmware via the network. You can select “Perform Update” after the unit is

ready for firmware update. You can also check the firmware version and system ID.

Setup menu

“Network” > “Network Update”

NOTE

▪ Firmware update takes about 20 minutes or more.

▪ If the Internet connection speed is slow, or the unit is connected to the wireless network, network update

may not be possible depending on the condition of the network. In this case, wait until firmware update is

ready, or update the firmware using the USB memory device. For details on using the USB memory

device, see the following:

– “Updating the firmware (UPDATE)” (p.120)

113

Configuring the Bluetooth® settings

Setting the use of Bluetooth®

Enables/disables the Bluetooth function.

Setup menu

“Bluetooth” > “Bluetooth”

Settings

Off Disables the Bluetooth function.

On Enables the Bluetooth function.

Terminating the connection between a Bluetooth®

device and the unit

Terminates the Bluetooth connection between a Bluetooth device (such as a

smartphone) and the unit.

Setup menu

“Bluetooth” > “Audio Receive” > “Disconnect”

Select “Disconnect” and press ENTER to terminate the Bluetooth connection.

NOTE

This setting is not available when no Bluetooth devices are connected.

Setting the use of the Bluetooth® Standby function

Selects whether to enable/disable the function that turns on the unit from Bluetooth

devices (Bluetooth standby). If this function is set to “On”, the unit automatically turns

on when a connect operation is performed on the Bluetooth device.

Setup menu

“Bluetooth” > “Audio Receive” > “Bluetooth Standby”

Settings

Off Disables the Bluetooth standby function.

Enables the Bluetooth standby function.

(The unit consumes more power than when “

Off” is selected.)

NOTE

This setting is not available when “Network Standby” is set to “Off”. For details, see the following:

▪ “Setting the use of the Network Standby function” (p.112)

114

Setting the use of audio transmission to a Bluetooth®

device

Enables/disables the Bluetooth audio transmitter function.

When this function is enabled, you can enjoy audio played back on the unit using

Bluetooth speakers/headphones.

Setup menu

“Bluetooth” > “Audio Send” > “Transmitter”

Settings

Off Disables the Bluetooth audio transmitter function.

On Enables the Bluetooth audio transmitter function.

NOTE

For details on connecting Bluetooth devices to which audio is transmitted (speakers, headphones, etc.), see

the following:

▪ “Connecting the unit to a Bluetooth

device that receives transmitted audio”

(p.115)

Connecting the unit to a Bluetooth® device that

receives transmitted audio

Establishes a connection between the unit and Bluetooth devices that receive audio

transmitted from the unit, such as speakers and headphones, when "Transmitter" is set

to "On" in the "

Setup" menu.

NOTE

For details on “Transmitter” in the “Setup” menu, see the following:

▪ “Setting the use of audio transmission to a Bluetooth

device” (p.115)

Setup menu

“Bluetooth” > “Audio Send” > “Device Search”

Press ENTER.

A list of Bluetooth devices that can connect to the unit is displayed.

Use the cursor keys to select the Bluetooth speakers/headphones

to be connected with the unit and press ENTER.

When the connection process finishes, “Completed” appears.

Press ENTER.

This completes the settings.

NOTE

▪ If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to pairing mode and

then perform “Device Search” operation again.

▪ To terminate the Bluetooth connection, perform a disconnect operation on the Bluetooth speakers/

headphones.

115

Configuring the language settings

Setting the on-screen menu language

Select the on-screen menu language.

Setup menu

“Language”

Settings

English English

日本語 Japanese

Français French

Deutsch German

Español Spanish

Русский Russian

Italiano Italian

中文 Chinese

NOTE

The information on the front display is provided in English only.

116

Configuring the advanced settings (ADVANCED SETUP menu)

Basic operation of the ADVANCED SETUP menu

Perform the following basic procedure to operate the “ADVANCED SETUP” menu while

viewing the front display.

Set the unit to standby mode.

While holding down STRAIGHT on the front panel, press

z (power).

(power)

STRAIGHTPROGRAM

The top item and its setting of the “ADVANCED SETUP” menu appear on

the front display.

Press PROGRAM to select an item.

Press STRAIGHT to select a setting.

Press z (power) to set the unit to standby mode and turn it on

again.

This completes the settings.

NOTE

For details on the default settings, see the following:

▪ “Default settings of the ADVANCED SETUP menu” (p.158)

ADVANCED SETUP menu items

Use the following table to configure system settings of the unit.

Item Function Page

SP IMP.

(U.S.A. and Canada models only)

Changes the speaker impedance setting.

p.118

REMOTE ID Selects the unit’s remote control ID. p.118

(Asia, Taiwan, Brazil, General, and Central and South America

models only)

Changes the FM/AM tuning frequency setting.

p.118

TV FORMAT Switches the video signal type of HDMI output. p.118

4K MODE Selects the HDMI 4K signal format. p.119

BKUP/RSTR Backups and restores all the settings for the unit. p.119

INIT Restores the default settings. p.120

UPDATE Updates the firmware. p.120

VERSION Checks the version of firmware currently installed on the unit. p.120

117

Changing the speaker impedance setting (SP IMP.)

(U.S.A. and Canada models only)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

SP IMP.••8¬MIN

Change the unit’s speaker impedance settings depending on the impedance of the

speakers connected.

ADVANCED SETUP menu

“SP IMP.”

Settings

6 Ω MIN Select this option when you connect 6-ohm speakers to the unit.

8 Ω MIN Select this option when you connect 8-ohm or higher speakers to the unit.

Selecting the remote control ID (REMOTE ID)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

REMOTE ID••ID1

Change the unit’s remote control ID so that it matches the remote control’s ID (default:

ID1). When using multiple Yamaha AV receivers, you can set each remote control with

a unique remote control ID for its corresponding receiver.

ADVANCED SETUP menu

“REMOTE ID”

Settings

ID1, ID2

Changing the remote control ID of the remote control

• To select ID1, while holding down the left cursor key, hold down SCENE (BD/DVD)

for 5 seconds.

• To select ID2, while holding down the left cursor key, hold down SCENE (TV) for 5

seconds.

Changing the FM/AM tuning frequency setting (TU)

(Asia, Taiwan, Brazil, General, and Central and South America models only)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

TU••••FM50/AM9

Change the FM/AM tuning frequency setting of the unit depending on your country or

region.

ADVANCED SETUP menu

“TU”

Settings

FM100/AM10

Select this when you want to adjust the FM frequency by 100-kHz steps

and AM by 10-kHz steps.

FM50/AM9

Select this when you want to adjust the FM frequency by 50-kHz steps

and AM by 9-kHz steps.

Switching the video signal type (TV FORMAT)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

TV FORMAT•NTSC

Switch the video signal type of HDMI output so that it matches to the format of your TV.

Since the unit automatically selects the video signal type so that it matches to the TV, it

is unnecessary to change the setting normally. Change the setting only when images

on the TV screen do not appear correctly.

ADVANCED SETUP menu

“TV FORMAT”

Settings

NTSC, PAL

118

Selecting the HDMI 4K signal format (4K MODE)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

4K MODE•MODE 1

Selects the format of signals input/output at the unit when HDMI 4K compatible TV and

playback device are connected to the unit.

ADVANCED SETUP menu

“4K MODE”

Settings

MODE 1

Inputs/outputs 4K signals shown in the following table. Depending on the

connected device or HDMI cables, video may not be displayed correctly.

In this case, select “MODE 2”.

MODE 2 Inputs/outputs 4K signals shown in the following table.

NOTE

When “MODE 1” is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with

Ethernet.

Format

MODE 1 MODE 2

8 bit 10 bit 12 bit 8 bit 10 bit 12 bit

4K/60, 50 Hz

RGB 4:4:4

– –

YCbCr 4:4:4

– –

YCbCr 4:2:2

–

YCbCr 4:2:0

4 4

–

4K/30, 25, 24 Hz

RGB 4:4:4

4 4

–

YCbCr 4:4:4

4 4

–

YCbCr 4:2:2

4 4

Backuping and restoring all the settings (BKUP/RSTR)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

BKUP/RSTR•BKUP

Backups and restores all the unit's setting to a USB memory device. Prepare a USB

memory device using FAT16 or FAT32 format in advance.

ADVANCED SETUP menu

“BKUP/RSTR”

Settings

RSTR Restores all the previous backuped settings.

BKUP Backups all the settings.

Connect the USB memory device to the USB jack on the front

panel.

To start the process, press STRAIGHT to select “BKUP” or

“RSTR” and then press INFO on the front panel.

Press INFO again after the confirmation message appears on the

front display.

When “Complete” appears on the front display, press z (power)

to set the unit to standby mode and turn it on again.

If “Failed” appears on the front display, check the following and start the

process again.

119

In case of “BKUP”:

• You cannot overwrite save. When you save the settings repeatedly, please move the

file in different folder.

• The file is stored by the name of “MC_backup_(model name).dat” in the route of the

USB memory device.

In case of “RSTR”:

• Check that the file is stored in the route of the USB memory device.

NOTE

▪ “RSTR” is effective after backuping all the settings.

▪ Do not turn off the unit during the backuping and restoring process. Otherwise, the settings may not be

restored correctly.

▪ The user information (such as account, password) is not saved.

Restoring the default settings (INIT)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

INIT••••CANCEL

Restores the default settings for the unit.

ADVANCED SETUP menu

“INIT”

Choices

ALL Restores the default settings for the unit.

CANCEL Does not perform an initialization.

Updating the firmware (UPDATE)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

UPDATE•••••USB

New firmware that provides additional features or product improvements will be

released as needed. Updates can be downloaded from our website to a USB memory

device. You can update the firmware using this USB memory device. For details, refer

to the information supplied with updates.

ADVANCED SETUP menu

“UPDATE”

Choices

USB Update the firmware using a USB memory device.

NETWORK Update the firmware via the network.

NOTE

Do not perform this menu unless firmware update is necessary. Also, make sure you read the information

supplied with updates before updating the firmware.

Checking the firmware version (VERSION)

ENHANCER

LINK

ECO

MASTER

OUT

YPAO

VOL.

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SBL SB SBR

FPL

MUT E VIRTU AL

VERSION••xx.xx

Check the version of firmware currently installed on the unit.

ADVANCED SETUP menu

“VERSION”

120

TROUBLESHOOTING

When any problem appears

If trouble occurs, first check the following:

Make sure of the following when the unit does not function properly.

• The power cables of the unit, TV and playback devices (such as BD/DVD players)

are connected to AC wall outlets securely.

• The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned

on.

• The connectors of each cable are securely inserted in to jacks on each device.

If there is no problem with the power and cables, refer to the instructions shown in

“When any problem appears” corresponding to the trouble of the unit.

If the problem you are experiencing is not listed or if the instructions do not help, turn

off the unit, disconnect the power cable, and contact the nearest authorized Yamaha

dealer or service center.

Power, system, or remote control trouble

The power does not turn on

l The protection circuitry has been activated three times consecutively.

If the standby indicator on the unit blinks when you try to turn on the power, as a

safety precaution, capability to turn on the power is disabled. Contact your nearest

Yamaha dealer or service center to request repair.

The power does not turn on in synchronization with the

l HDMI Control on the unit is disabled.

If turning off the unit is not synchronized to the TV either, check the setting of HDMI

Control on the unit. For details on HDMI Control, see the following:

– “Setting the use of HDMI Control” (p.99)

l HDMI Control on the TV is disabled.

If only turning on the unit is not synchronized to the TV, check the setting on the

TV. For details, refer to the instruction manual for the TV and set HDMI Control on

the TV.

l Because of a power failure, the unit's power is no longer synchronized.

Disconnect the HDMI cables and power cables, and after five minutes, reconnect

the cables of playback devices first, then the unit, and then the TV. Then, check

that the power is synchronized.

The power does not turn off

l The internal microcomputer has frozen, due to an external electric shock (such

as lightning or excessive static electricity) or to a drop in the power supply

voltage.

Hold down z (power) on the front panel for more than 15 seconds to reboot the

unit. If the problem persists, disconnect the power cable from the AC wall outlet

and plug it again.

121

The power turns off (standby mode) immediately

l The unit was turned on while a speaker cable was shorted.

Twist the bare wires of each speaker cable firmly and reconnect to the unit and

speakers. For details, see the following:

– “Connecting the speaker” (p.18)

The unit enters standby mode automatically

l The sleep timer worked.

Turn on the unit and start playback again.

l The auto-standby function activated because the unit was not used for the

specified time.

To disable the auto-standby function, set “Auto Power Standby” in the “Setup”

menu to “Off”. For details, see the following:

– “Setting the amount of time for the auto-standby function” (p.106)

l The speaker impedance setting is incorrect.

Set the speaker impedance to match your speakers. For details, see the following:

– “Changing the speaker impedance setting (SP IMP.)” (p.118)

l The protection circuitry has been activated because of a short circuit.

Twist the bare wires of each speaker cable firmly and reconnect to the unit and

speakers. For details, see the following:

– “Connecting the speaker” (p.18)

The unit is not reacting

l The internal microcomputer is frozen, due to an external electric shock (such

as lightning or excessive static electricity) or to a drop in the power supply

voltage.

Hold down z (power) on the front panel for more than 15 seconds to reboot the

unit. If the problem persists, disconnect the power cable from the AC wall outlet

and plug it again.

The unit cannot be controlled using the remote control

l The unit is out of the operating range.

Use the remote control within the operating range. For details, see the following:

– “Operating range of the remote control” (p.8)

l The batteries are weak.

Replace with new batteries.

l The unit’s remote control sensor is exposed to direct sunlight or strong

lighting.

Adjust the lighting angle, or reposition the unit.

l The remote control IDs of the unit and the remote control are not identical.

Change the remote control ID of the unit or the remote control. For details, see the

following:

– “Selecting the remote control ID (REMOTE ID)” (p.118)

l The remote control is set to the Zone B operation mode.

Set the remote control to the Zone A operation mode. For details, see the following:

– “Part names and functions of the remote control” (p.15)

122

Cannot select the desired input source even if “INPUT”

is pressed

l The function which skips some input sources is set.

Set “Input Skip” of the desired input source in the “Setup” menu to “Off”. For

details, see the following:

– “Setting input sources to be skipped when operating the INPUT key” (p.108)

The RED/GREEN/YELLOW/BLUE keys of the remote

control do not operate

l The device which is connected to the unit via HDMI does not support the

operation of the RED/GREEN/YELLOW/BLUE keys.

Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE

keys.

l The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's remote

control have been changed.

Set the “Remote Color Key” settings in the “Setup” menu to “Default”. For details,

see the following:

– “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the

remote control”

(p.

109)

Audio trouble

No sound

l Another input source is selected.

Select an appropriate input source with the input selection keys. For details, see

the following:

– “Basic procedure for playing back video and music” (p.46)

l Signals that the unit cannot reproduce are being input.

Some digital audio formats cannot be played back on the unit. Ensure that the

signals are types that the unit is able to play back. For details on supported file

formats, HDMI audio formats or compatible decoding format, see the following:

– “Supported file formats” (p.147)

– “Specifications” (p.152)

l Zone B is disabled.

Slide the Zone switch to “ZONE B”, and then operate Zone B. For details, see the

following:

– “Operating the Zone B” (p.44)

l The cable connecting the unit and playback device is defective.

If there is no problem with the connection, replace with another cable.

The volume cannot be increased

l The maximum volume is set too low.

Use “Max Volume” in the “Setup” menu to adjust the maximum volume. For details,

see the following:

– “Setting the limit value of the volume” (p.104)

l A device connected to the output jacks of the unit is not turned on.

Turn on all devices connected to the output jacks of the unit.

123

No sound is coming from a specific speaker

l The playback source does not contain a signal for the channel.

To check it, use “Signal Information” in the “Option” menu. For details, see the

following:

– “Checking information about the video/audio signals” (p.83)

l The currently selected sound program/decoder does not use the speaker.

To check it, use “Test Tone” in the “Setup” menu. For details, see the following:

– “Outputting test tones” (p.98)

l Audio output of the speaker is disabled.

Perform YPAO or use “Configuration” in the “Setup” menu to change the speaker

settings. For details, see the following:

– “Optimizing the speaker settings automatically (YPAO)” (p.33)

– “Setting the use of a subwoofer” (p.93)

– “Setting the size of the front speakers” (p.94)

– “Setting the use of a center speaker and its size” (p.94)

– “Setting the use of surround speakers and their size” (p.95)

l The volume of the speaker is set too low.

Perform YPAO or use “Level” in the “Setup” menu to adjust the speaker volume.

For details, see the following:

– “Optimizing the speaker settings automatically (YPAO)” (p.33)

– “Adjusting the volume of each speaker” (p.97)

l The speaker cable connecting the unit and the speaker is defective.

Check the unit’s SPEAKERS terminals and the speaker’s terminals. If there is no

problem with the connection, replace a breaking speaker cable with another

speaker cable.

l The speaker is malfunctioning.

To check it, replace with another speaker. If the problem persists with using

another speaker, the unit may be malfunctioning.

No sound is coming from the subwoofer

l The playback source does not contain Low Frequency Effect (LFE) or low-

frequency signals.

To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the

front channel low-frequency components from the subwoofer. For details, see the

following:

– “Setting the use of Extra Bass” (p.96)

l Subwoofer output is disabled.

Perform YPAO or set “Subwoofer” in the “Setup” menu to “Use”. For details, see

the following:

– “Optimizing the speaker settings automatically (YPAO)” (p.33)

– “Setting the use of a subwoofer” (p.93)

l The volume of the subwoofer is too low.

Adjust the volume on the subwoofer.

l The subwoofer has been turned off by its auto-standby function.

Disable the auto-standby function of the subwoofer or adjust its sensitivity level.

No sound from the playback device connected to the

unit with HDMI

l The TV does not support HDCP (High-bandwidth Digital Content Protection).

Refer to the instruction manuals for the TV and check the TV’s specifications.

l The number of devices connected to the HDMI OUT jack exceeds the limit.

Disconnect some of the HDMI devices.

124

No sound from the TV when HDMI Control is used

l The TV is set to output audio from the TV speakers.

Change the audio output setting on your TV so that the TV audio is output from the

speakers connected to the unit.

l A TV that does not support ARC is connected to the unit only with an HDMI

cable.

Use a digital optical cable to make an audio connection. For details, see the

following:

– “HDMI connection with a TV” (p.24)

l If the TV is connected to the unit with an audio cable, the TV audio input

setting does not match the actual connection.

Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack.

For details, see the following:

– “Setting the audio jack used for TV audio input” (p.100)

l If you are trying to use ARC, ARC is disabled on the unit or TV.

Set “ARC” in the “Setup” menu to “On”, and enable ARC on the TV. For details,

see the following:

– “Setting the use of ARC” (p.100)

Only the front speakers work on multichannel audio

l The playback device is set to output 2-channel audio (such as PCM) only.

To check it, use “Signal Information” in the “Option” menu. If necessary, change

the digital audio output setting on the playback device. For details, see the

following:

– “Checking information about the video/audio signals” (p.83)

Noise/hum is heard

l The unit is too close to another digital or radio frequency device.

Move the unit further away from the device.

l The cable connecting the unit and playback device is defective.

If there is no problem with the connection, replace with another cable.

The sound is distorted

l The volume of the unit is too high.

Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to

“Off”. For details, see the following:

– “Setting the use of the eco mode” (p.106)

l A device (such as an external power amplifier) connected to the unit’s audio

output jacks is not turned on.

Turn on all devices connected to the unit’s audio output jacks.

125

Video trouble

No video

l Another input source is selected on the unit.

Select an appropriate input source with the input selection keys.

l Another input source is selected on the TV.

Switch the TV input to display the video from the unit.

l The video signal output from the unit is not supported by the TV.

Check the video output setting of the playback device. For information about video

signals supported by the TV, refer to the instruction manuals for the TV.

l The cable connecting the unit and TV (or playback device) is defective.

If there is no problem with the connection, replace with another cable.

No video from the playback device connected to the

unit with HDMI

l The input video signal (resolution) is not supported by the unit.

To check the information about the current video signal (resolution) and video

signals supported by the unit, see the following:

– “Checking information about the video/audio signals” (p.83)

– “HDMI signal compatibility” (p.150)

l The TV does not support HDCP (High-bandwidth Digital Content Protection).

Refer to the instruction manuals for the TV and check the TV’s specifications.

l The number of devices connected to the HDMI OUT jack is over the limit.

Disconnect some of the HDMI devices.

No image (contents required the HDCP 2.2/2.3 -

compatible HDMI device) from the playback device

l The TV (HDMI input jack) does not support HDCP 2.2/2.3.

Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2/2.3. (The

Warning message can be displayed on the TV screen.)

The menu of the unit is not displayed on the TV

l The TV is not connected to the unit via HDMI.

You can display the menu of the unit on the TV only when they are connected with

an HDMI cable. If necessary, use an HDMI cable to connect them. For details, see

the following:

– “HDMI connection with a TV” (p.24)

l Another input source is selected on the TV.

Switch the TV input to display the video from the unit (HDMI OUT jack).

126

FM/AM radio trouble (AM radio feature is available

only on RX-V485)

FM radio reception is weak or noisy

l There is multi-path interference.

Adjust the FM antenna height or orientation, or place it in a different location.

l Your area is too far from the FM station transmitter.

To select monaural FM radio reception, set “FM Mode” in the “Option” menu to

“Monaural

”. Or use an outdoor FM antenna. For details on “

FM Mode”, see the

following:

– “Switching between stereo and monaural for FM radio reception” (p.84)

AM radio reception is weak or noisy

l The noises may be caused by fluorescent lamps, motors, thermostats, or other

electrical equipment.

It is difficult to completely eliminate noise. It may be reduced by using an outdoor

AM antenna.

Radio stations cannot be selected automatically

l Your area is too far from the FM station transmitter.

Select the station manually. Or use an outdoor antenna. We recommend using a

sensitive multi-element antenna. For details on selecting the station manually, see

the following:

– “Selecting a frequency for reception” (p.51)

l The AM radio signal is weak.

Adjust the AM antenna orientation. Select the station manually. Use an outdoor AM

antenna. For details on selecting the station manually, see the following:

– “Selecting a frequency for reception” (p.51)

AM radio stations cannot be registered as presets

l Auto Preset has been used.

Auto Preset is for registering FM radio stations only. Register AM radio stations

manually. For details, see the following:

– “Registering a radio station manually” (p.53)

DAB radio trouble (RX-D485)

No DAB radio reception

l An initial scan has not been performed.

Perform an initial scan to receive DAB radio. For details, see the following:

– “Preparing the DAB tuning” (p.56)

No DAB radio reception even after performing an initial

scan

l Reception strength of DAB radio is poor.

Check reception strength in “Tune AID” in the “Option” menu, and adjust the

antenna height or orientation, or place it in a different location. For details, see the

following:

– “Checking reception strength of each DAB channel label” (p.60)

l There is no DAB coverage in your area.

Check with your dealer or WorldDMB online at “http://www.worlddab.org” for a

listing of the DAB coverage in your area.

127

DAB radio reception is weak or noisy

l There is multi-path interference.

Check reception strength in “Tune AID” in the “Option” menu, and adjust the

antenna height or orientation, or place it in a different location. For details, see the

following:

– “Checking reception strength of each DAB channel label” (p.60)

l Your area is too far from the DAB station transmitter.

Use an outdoor antenna. We recommend using a sensitive multi-element antenna.

DAB information is not available or is inaccurate

l The selected DAB radio station may be temporarily out of service or may not

provide information.

Contact the DAB broadcaster.

No DAB radio sound

l The selected DAB radio station may be temporarily out of service.

Try the station later or select another station.

USB trouble

The unit does not detect the USB device

l The USB device is not connected to the USB jack securely.

Turn off the unit, reconnect your USB device, and turn the unit on again.

l The file system of the USB device is not FAT16 or FAT32.

Use a USB device with FAT16 or FAT32 format.

Folders and files in the USB device cannot be viewed

l The data in the USB device is protected by the encryption.

Use a USB device without an encryption function.

The unit does not perform continuous playback on files

of USB device

l When the unit detects a series of unsupported files during playback, playback

stops automatically.

Do not save unsupported files (such as images and hidden files) in folders for

playback.

128

Network trouble

The network feature does not function

l The network parameters (IP address) have not been obtained properly.

Enable the DHCP server function on your router and set “DHCP” in the “Setup”

menu to “On” on the unit. If you want to configure the network parameters

manually, check that you are using an IP address which is not used by other

network devices in your network. For details, see the following:

– “Setting the network parameters automatically (DHCP)” (p.110)

– “Setting the network parameters manually” (p.111)

l The unit does not support IPv6 network.

Connect IPv4 network.

The unit cannot connect to the Internet via a wireless

router (access point)

l The wireless router (access point) is turned off.

Turn on the wireless router.

l The unit and the wireless router (access point) are too far apart.

Place the unit and the wireless router (access point) closer to each other.

l There is an obstacle between the unit and the wireless router (access point).

Move the unit and the wireless router (access point) in a location where there are

no obstacles between them.

l The wireless router (access point) is set to use the wireless channel 14.

Change settings of the wireless router (access point) to use one of the wireless

channels from 1 to 13.

Wireless network is not found

l Microwave ovens or other wireless devices in your neighborhood might

disturb the wireless communication.

Turn off these devices.

l Access to the network is restricted by the firewall settings of the wireless

router (access point).

Check the firewall setting of the wireless router (access point).

The unit does not detect the media server (PC/NAS)

l The media sharing setting is not correct.

Configure the sharing setting and select the unit as a device to which music

contents are shared. For details, see the following:

– “Media sharing setup on media servers (PCs/NAS)” (p.69)

l Some security software installed on your media server is blocking the access

of the unit to your media server.

Check the settings of security software installed on your media server.

l The unit and media server are not in the same network.

Check the network connections and your router settings, and then connect the unit

and the media server to the same network.

l The MAC address filter is enabled on the unit.

In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or

specify the MAC address of your media server to allow it to access to the unit. For

details, see the following:

– “Setting the MAC address filter” (p.111)

The files in the media server (PC/NAS) cannot be

viewed or played back

l The files are not supported by the unit or the media server.

Use the file format supported by both the unit and the media server. For

information about the file formats supported by the unit, see the following:

– “Supported file formats” (p.147)

129

The Internet radio cannot be played

l The selected Internet radio station is currently not available.

There may be a network problem at the radio station, or the service may have

been stopped. Try the station later or select another station.

l The selected Internet radio station is currently broadcasting silence.

Some Internet radio stations broadcast silence at certain of times of the day. Try

the station later or select another station.

l Access to the network is restricted by the firewall settings of your network

devices (such as the router).

Check the firewall settings of your network devices. The Internet radio can be

played only when it passes through the port designated by each radio station. The

port number varies depending on the radio station.

The iPhone does not recognize the unit when using

AirPlay

l The unit is connected to a multiple SSID router.

Access to the unit might be restricted by the network separation function on the

router. Connect the iPhone to the SSID which can access the unit. (Connect it to

the Primary SSID at the top of the list.)

The application for mobile devices does not detect the

unit

l The unit and mobile device are not in the same network.

Check the network connections and your router settings, and then connect the unit

and mobile device to the same network.

l The MAC address filter is enabled on the unit.

In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or

specify the MAC address of your mobile device to allow it to access to the unit. For

details, see the following:

– “Setting the MAC address filter” (p.111)

l The unit is connected to a multiple SSID router.

Access to the unit might be restricted by the network separation function on the

router. Connect the iPhone to the SSID which can access the unit. (Connect it to

the Primary SSID at the top of the list.)

Firmware update via the network is failed

l It may not be possible depending on the condition of the network.

Update the firmware via the network again or use a USB memory device. For

details, see the following:

– “Updating the firmware via the network” (p.113)

130

Bluetooth® trouble

A Bluetooth® connection cannot be established

l The Bluetooth function of the unit is disabled.

Enable the Bluetooth function. For details, see the following:

– “Setting the use of Bluetooth

” (p.

114

)

l Another Bluetooth device is already connected to the unit.

Terminate the current Bluetooth connection and then establish a new connection.

For details, see the following:

– “Playback Bluetooth

device music on the unit” (p.65)

l The unit and the Bluetooth device are too far apart.

Move the Bluetooth device closer to the unit.

l There is a device (such as microwave oven and wireless LAN) that outputs

signals in the 2.4 GHz frequency band nearby.

Move the unit and the Bluetooth device away from those devices.

l The Bluetooth device does not support A2DP.

Use a Bluetooth device that supports A2DP.

l The connection information registered on the Bluetooth device is not working

for some reason.

Delete the connection information on the Bluetooth device, and then establish a

connection between the Bluetooth device and the unit again. For details, see the

following:

– “Playback Bluetooth

device music on the unit” (p.

65)

No sound is produced, or the sound is interrupted

during playback with Bluetooth® connection

l The volume of the Bluetooth device is set too low.

Turn up the volume of the Bluetooth device.

l The Bluetooth device is not set to send audio signals to the unit.

Switch the audio output of the Bluetooth device to the unit.

l The Bluetooth connection has been terminated.

Establish a Bluetooth connection between the Bluetooth device and the unit again.

For details, see the following:

– “Playback Bluetooth

device music on the unit”

(p.65)

l The unit and the Bluetooth device are too far apart.

Move the Bluetooth device closer to the unit.

l There is a device (such as microwave oven and wireless LAN) that outputs

signals in the 2.4 GHz frequency band nearby.

Move the unit and the Bluetooth device away from those devices.

131

Error indications on the front display

Refer to the following table when the error message is indicated on the front display.

Message Cause Remedy

Access denied

Access to the media servers (PCs/NAS) is denied.

Configure the sharing settings and select the unit as a device to which music contents are shared. For

details, see the following:

• “Media sharing setup on media servers (PCs/NAS)” (p.69)

Access error

The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

There is a problem with the signal path from the network to the unit.

Make sure your router and modem are turned on, and check the connection between the unit and your

router (or hub). For details, see the following:

• “Connecting a network cable (wired connection)” (p.29)

• “Preparing wireless antennas (wireless connection)” (p.30)

Check SP Wires

The speaker cables are short circuited.

Twist the bare wires of the cables firmly and connect to the unit and speakers properly. For details, see

the following:

• “Connecting the speaker” (p.18)

Internal Error

An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center.

No content

There are no playable files in the selected folder. Select a folder that contains files supported by the unit.

No device

The unit cannot detect the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Not connected

The network cable is not connected. Connect the network cable properly.

The wireless router (access point) is not found. Make sure the wireless router (access point) is turned on.

Please wait

The unit is preparing for connecting to the network.

Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn

it on again.

RemID Mismatch

The remote control IDs of the unit and the remote control are not

identical.

Change the remote control ID of the unit or the remote control. For details, see the following:

• “Selecting the remote control ID (REMOTE ID)” (p.118)

Unable to play

The unit cannot play back the songs stored on the iPhone for some

reason.

Check the song data. If it cannot be played on the iPhone itself, the song data or storage area may be

defective.

The unit cannot play back the songs stored on the media servers

(PCs/NAS) for some reason.

Ensure that the files are types that the unit is able to play back. If the unit supports the file format, but

still cannot play back any files, the network may be overloaded with heavy traffic. For information about

the formats supported by the unit, see the following:

• “Supported file formats” (p.147)

USB Overloaded

An overcurrent is flowing through the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Version error

Firmware update failed.

Update the firmware again. For details, see the following:

• “Updating the firmware (UPDATE)” (p.120)

• “Updating the unit’s firmware via the network” (p.135)

132

Message Cause Remedy

Update failed.

Firmware update failed.

Press STRAIGHT and select a firmware updating method, then press INFO to update the firmware

again. For details, see the following:

• “Updating the firmware (UPDATE)” (p.120)

• “Updating the unit’s firmware via the network” (p.135)

FILE NOT READY

Preparation for firmware update is not finish yet. Wait a while before updating the firmware again.

133

APPENDIX

Updating the unit’s firmware via the network

Firmware updates

New firmware that provides additional features or product improvements will be

released as needed. If the unit is connected to the Internet, new firmware is

downloaded via the network. When a firmware update is ready, the following message

appears after SETUP is pressed.

You can switch the language.

For details on the firmware update, see the following:

• “Updating the unit’s firmware via the network” (p.135)

NOTICE

▪ Do not operate the unit or disconnect the power cable or network cable during firmware update. If the

firmware update is interrupted, there is a possibility that the unit will malfunction. In this case, contact

your nearest authorized Yamaha dealer or service center to request repair.

NOTE

▪ The firmware update indicator on the front display lights up when a firmware update is ready. This

indicator might not light up when the network connection speed is too slow or a later firmware update is

available.

▪ Firmware update takes about 20 minutes or more.

▪ You might not get the message or the lighting up firmware update indicator on the front display depending

on the condition of the network connection. In this case, update the firmware using the USB memory

device. For details, see the following:

– “Updating the firmware (UPDATE)” (p.120)

▪ For details on firmware updates, visit the Yamaha website.

134

Updating the unit’s firmware via the network

Confirm the on-screen description displayed after SETUP is pressed, and start the

firmware update.

Read the on-screen description and press the down cursor key.

The next screen appears.

To start the firmware update, press ENTER.

The on-screen display turns off.

If “UPDATE SUCCESS PLEASE POWER OFF!” appears on the

front display, press z (power) on the front panel.

The firmware update is complete.

NOTE

▪ Firmware update takes about 20 minutes or more.

▪ You might not get the message or the lighting up firmware update indicator on the front display depending

on the condition of the network connection. In this case, update the firmware using the USB memory

device. For details on using the USB memory device, see the following:

– “Updating the firmware (UPDATE)” (p.120)

▪ For details on update, visit the Yamaha website.

▪ If you want to perform update when turning off the unit, press not ENTER but the down cursor key in step

2, and follow the on screen instructions. When you turn off the unit, a screen asking you to confirm the

firmware update is displayed, and press

ENTER to start the firmware update. After the firmware update is

complete, the unit will turn off automatically.

▪

To perform update when turning off the unit, refer to the following instructions and supplementary

explanations.

– The firmware update can be started by pressing INFO on the front panel.

– The unit turns off automatically without performing the firmware update if two minutes pass after the

screen to confirm the firmware update is displayed.

– To cancel the firmware update process, press RETURN, and the unit will turn off.

– The unit turns off without performing the firmware update if you turn off the unit with AV CONTROLLER

or MusicCast CONTROLLER.

135

Using wireless surround speakers (MusicCast Surround function)

Using wireless surround speakers (MusicCast

Surround function)

Using devices that support the MusicCast Surround function, you can enjoy a 5.1-

channel system with wireless surround speakers and subwoofer.

NOTE

▪ For details on the 5.1-channel system, see the following:

– “Using 5.1-channel system” (p.20)

▪ Refer to the instruction manual of the devices that support the MusicCast Surround function for details on

settings and operations.

Devices supporting MusicCast Surround

As of December 1, 2018

MusicCast 50 MusicCast 20 MusicCast SUB 100

Wireless Streaming Speaker Network Subwoofer

Sample speaker layout

The following is a 5.1-channel system using two MusicCast 20 speakers as the

surround speakers and one MusicCast SUB 100 as the subwoofer.

NOTE

▪ In a 5.1-channel system, the surround speakers and subwoofer can be wireless. With other systems, only

the subwoofer can be wireless.

▪ With wireless surround speakers

– Sound will not be output from the speaker terminals (SURROUND) on the unit.

▪ With a wireless subwoofer

– One subwoofer can be wireless.

– Sound will not be output from the pre-out jack (SUBWOOFER) on the unit. Therefore, another

subwoofer cannot be used by connecting it with an audio cable.

▪ The following audio cannot be output from the wireless surround speakers and subwoofer.

– DSD audio

– DVD-Audio and Super Audio CD (SACD) from HDMI input

136

The unit and the devices supporting MusicCast Surround must be

registered with the same location on the MusicCast

CONTROLLER app.

Follow the app’s on-screen instructions to complete setup of the

MusicCast Surround function.

Tap the

settings icon.

Tap “MusicCast

Surround/Stereo”.

For detailed setup instructions, refer to the following.

https://download.yamaha.com/files/tcm:39-1212383

Adjust the speaker settings automatically (YPAO).

NOTE

For details on YPAO, see the following:

▪ “Optimizing the speaker settings automatically (YPAO)” (p.33)

Check the settings.

And then, you can enjoy content playback with the MusicCast

CONTROLLER app.

137

Connecting to a network wirelessly

Selecting a wireless network connection method

Select a wireless connection method according to your network environment.

NOTE

▪ You need to configure the network settings if your router does not support DHCP or if you want to

configure the network parameters manually. For details, see the following:

– “Setting the network parameters manually” (p.111)

▪ When the unit is added to a MusicCast network, the network settings can be configured at the same time.

If you use MusicCast, this method is recommended. For details, see the following:

– “Adding the unit to the MusicCast network” (p.37)

Mobile device

(such as iPhone)

Internet

Modem

Wireless router

The unit

Press z (receiver power) to turn on the unit.

Turn on the TV and switch the TV input to display video from the

unit (HDMI OUT jack).

Press SETUP.

Use the cursor keys to select “Network” and press ENTER.

Use the cursor keys to select “Network Connection” and press

ENTER.

Use the cursor keys to select “Wireless(Wi-Fi)” and press ENTER.

The following connection methods are available.

• “Setting up a wireless connection using the WPS button” (p.139)

• “Setting up a wireless connection using an iOS device” (p.139)

• “Setting up a wireless connection by selecting from the list of available access

points” (p.

140

)

• “Setting up a wireless connection manually” (p.141)

• “Setting up a wireless connection by using the WPS PIN code” (p.142)

138

Setting up a wireless connection using the WPS

button

You can easily set up a wireless connection with one push of the WPS button.

Setup menu

“Network” > “Network Connection” > “Wireless(Wi-Fi)”

Use the cursor keys to select “WPS Button” and press ENTER.

Read the on-screen description and push the WPS button on the

wireless router (access point).

When the connection process finishes, “Completed” appears on the front

display.

If “Not connected” appears, repeat from step 1 or try another connection

method.

This completes the network settings.

NOTE

▪ The unit may not connect to the wireless router (access point) using WEP as the encryption method. In

this case, try another connection method.

▪ You can use INFO (WPS) on the front panel. Hold down INFO (WPS) for a few seconds to set up a

wireless connection and then “Press WPS button on Access Point

” appears on the front display, push the

WPS button.

About WPS

▪

WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy

establishment of a wireless home network.

Setting up a wireless connection using an iOS device

You can set up a wireless connection by applying the connection settings on iOS

devices (iPhone/iPad/iPod touch).

Before proceeding, confirm that your iOS device is connected to a wireless router.

NOTE

▪ This process will restore the default settings for the following.

– Network settings

– Bluetooth settings

– Bluetooth, USB, media server and network content registered as shortcuts

– Internet radio stations registered to “Favorites”

– Account information for the network services

▪ You need iOS device with iOS 7 or later. (The following procedure is a setup example for iOS 10.)

▪ This configuration does not work if the security method of your wireless router (access point) is WEP. In

this case, use other connection method.

Setup menu

“Network” > “Network Connection” > “Wireless(Wi-Fi)”

Use the cursor keys to select “WAC(iOS)” and press ENTER.

Read the on-screen description and press ENTER.

NOTE

When you use wired network connection, a warning message is displayed on the screen.

Disconnect the network cable from the unit, and then press

ENTER.

On the iOS device, select the unit as the AirPlay speaker in the Wi-

Fi screen.

iOS 10 (example of English version)

The name of the unit

139

Select the network (access point) of which you want to share the

settings with the unit.

The network currently selected

Tap here to start setup

When the sharing process finishes, the unit is automatically connected to

the selected network (access point) and “Completed” appears on the

front display.

If “Not shared” or “Not connected

” appears, press ENTER to repeat from

step 1 or try another connection method.

Press SETUP.

This completes the network settings.

Setting up a wireless connection by selecting from

the list of available access points

You can set up a wireless connection by selecting an access point from the list of

wireless LAN routers (access points) found by the unit. You need to manually enter the

security key.

Setup menu

“Network” > “Network Connection” > “Wireless(Wi-Fi)”

Use the cursor keys to select “Access Point Scan” and press

ENTER.

After searching for access points, the list of available access points

appears on the TV.

Use the cursor keys to select the desired access point and press

ENTER.

The wireless connection setting screen appears on the TV.

Access Point X

Press ENTER.

The edit screen appears.

140

Use the cursor keys and ENTER to enter the security key.

When finished entering the key, use the cursor keys to select

“OK” and press ENTER.

The previous wireless connection setting screen appears on the TV.

Use the cursor keys to select “Connect” and press ENTER to start

the connection process.

When the connection process finishes, “Completed” appears on the TV

screen.

If “Not connected” appears, repeat from step 2 or try another connection

method.

Press SETUP.

This completes the network settings.

Setting up a wireless connection manually

You can set up a wireless connection by entering the required information manually.

You need to set up the SSID (network name), encryption method and security key for

your network.

Setup menu

“Network” > “Network Connection” > “Wireless(Wi-Fi)”

Use the cursor keys to select “Manual Setting” and press ENTER.

The manual setting screen appears.

Use the cursor keys to select “SSID” and press ENTER.

The edit screen appears.

Use the cursor keys and ENTER to enter the SSID of the access

point.

141

When finished entering the key, use the cursor keys to select

“OK” and press ENTER.

The previous manual setting screen appears on the TV.

Use the cursor keys to select “Security” and select the encryption

method.

Choices

None, WEP, WPA-PSK(AES), Mixed Mode

NOTE

If you select “None”, the connection may be insecure since the communication is not encrypted.

Use the cursor keys to select “Security Key” and press ENTER.

The edit screen appears.

NOTE

If you select “None” in step 5, this item is not available.

Use the cursor keys and ENTER to enter the security key.

When finished entering the key, use the cursor keys to select

“OK” and press ENTER.

The previous manual setting screen appears on the TV.

Use the cursor keys to select “Connect” and press ENTER to start

the connection process.

When the connection process finishes, “Completed” appears on the TV

screen.

If “Not connected” appears, check that all the information is entered

correctly, and repeat from step 2.

Press SETUP.

This completes the network settings.

Setting up a wireless connection by using the WPS

PIN code

You can set up a wireless connection by entering the unit’s PIN code into the wireless

router (access point). The method is available if the wireless router (access point)

supports the WPS PIN code method.

Setup menu

“Network” > “Network Connection” > “Wireless(Wi-Fi)”

Use the cursor keys to select “PIN Code” and press ENTER.

The list of available access points appears on the TV.

Use the cursor keys to select the desired access point and press

ENTER.

The PIN code of the unit appears on the TV screen.

Enter the unit’s PIN code into the wireless router (access point).

For details on settings, refer to the instruction manual of the wireless

router (access point).

Press ENTER to start the connection process.

When the connection process finishes, “Completed” appears on the TV

screen.

If “Not connected” appears, repeat from step 2 or try another connection

method.

Press SETUP.

This completes the network settings.

142

Input/output jacks and cables

Video/audio jacks

HDMI jacks

Transmit digital video and digital sound through a

single jack. Use an HDMI cable.

HDMI cable

NOTE

▪ Use a 19-pin HDMI cable with the HDMI logo. We recommend

using a cable as short as possible to prevent signal quality

degradation.

▪ The unit’s HDMI jacks support the HDMI Control, Audio Return

Channel (ARC), and 3D and 4K Ultra HD video transmission

(through output) features.

▪ Use a Premium High Speed HDMI Cable or Premium High Speed

Cable with Ethernet to enjoy 3D or 4K Ultra HD videos.

Video jacks

VIDEO jacks

Transmit analog video signals. Use a video pin cable.

Video pin cable

Audio jacks

OPTICAL jack

Transmit digital audio signals. Use a digital optical

cable. If there is a protective cap on the tip of the

cable, remove it before using the cable.

OPTICAL

Digital optical cable

COAXIAL jacks

Transmit digital audio signals. Use a digital coaxial

cable.

Digital coaxial cable

AUDIO jacks

Transmit analog stereo audio signals.

(Stereo L/R jacks)

Use a stereo pin cable (RCA cable).

Stereo pin cable

(Stereo mini jack)

Use a stereo mini-plug cable.

Stereo mini-plug cable

143

Glossary

Glossary of audio information

Glossary of audio decoding format

This is a glossary of the technical terms related to audio decoding format used in this

manual.

Dolby Digital

Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that

supports 5.1-channel audio. This technology is used for audio on most DVD disc.

Dolby Digital Plus

Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that

supports 7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing

multichannel audio systems that support Dolby Digital. This technology is used for audio

streaming services on the Internet and audio on BD (Blu-ray Disc).

Dolby Pro Logic II

Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes

available: “Music mode” for music sources, “Movie mode” for movie sources, and “Game mode”

for game sources.

Dolby TrueHD

Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to

offer a high-definition home theater experience with the quality of the studio master. Dolby TrueHD

can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio)

simultaneously. This technology is used for audio on BD (Blu-ray Disc).

DTS 96/24

DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit

audio. This format remains fully compatible with the existing multichannel audio systems that

support DTS Digital Surround. This technology is used for music DVDs, etc.

DTS Digital Surround

DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports

5.1-channel audio. This technology is used for audio on most DVD discs.

DTS Express

DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a

higher compression rate than the DTS Digital Surround format developed by DTS, Inc. This

technology is developed for audio streaming services on the Internet and secondary audio on BD

(Blu-ray Disc).

DTS-HD High Resolution Audio

DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that

supports 7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully

compatible with the existing multichannel audio systems that support DTS Digital Surround. This

technology is used for audio on most BD (Blu-ray Disc).

DTS-HD Master Audio

DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition

home theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio

can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio)

simultaneously. This technology is used for audio on BD (Blu-ray Disc).

DTS Neo: 6

DTS Neo: 6 enables 6-channel playback from 2-channel sources. There are two modes available:

“Music mode” for music sources and “Cinema mode” for movie sources. This technology provides

discrete full-bandwidth matrix channels of surround sound.

DSD (Direct Stream Digital)

DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as

SACD (Super Audio CDs). The signals are stored at a high-frequency sampling rate (such as 11.2

MHz). The highest frequency response is equal to or higher than 100 kHz, with a dynamic range

of 120 dB. This technology offers better audio quality than that used for CDs.

FLAC

FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed

audio formats in compression rate but provides higher audio quality.

MP3

One of the compressed digital audio format used by MPEG. With psychoacoustic technologies,

this compression method achieves a high compression rate. Reportedly, it is capable of

compressing data quantity by about 1/10 maintaining a certain level of audio quality.

MPEG-4 AAC

An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio

streaming services on Internet because it allows a high compression rate of data while

maintaining better audio quality than MP3.

PCM (Pulse Code Modulation)

PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted.

This technology is the basis of all other audio format. This technology is used as a lossless audio

format called Linear PCM for audio on a variety of media, including CDs.

Sampling frequency/Quantization bit

Sampling frequency and quantization bits indicate the quantity of information when an analog

audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”.

• Sampling frequency

Sampling frequency (the number of times the signal is sampled per second) is called the

sampling rate. When the sampling frequency is higher, the range of frequencies that can be

played back are wider.

• Quantization bit

The number of quantization bits indicate the degree of accuracy when converting the sound

level into a numeric value. When the number of quantized bits is higher, the expression of the

sound level is more accurate.

144

WAV

Windows standard audio file format, which defines the method of recording the digital data

obtained by converting audio signals. By default, the PCM method (no compression) is used, but

you can also use other compression methods.

WMA (Windows Media Audio)

One of the compressed digital audio formats developed by Microsoft Corporation. With

psychoacoustic technologies, this compression method achieves a high compression rate.

Reportedly, it is capable of compressing data quantity by about 1/20 maintaining a certain level of

audio quality.

Glossary of audio information other than audio

decoding format

This is a glossary of the technical terms related to audio information used in this

manual.

Bi-amplification connection (Bi-amp)

A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification

connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a

consequence, the tweeter and woofer provide clear audio signal without the interference.

LFE (Low Frequency Effects) 0.1 channel

This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to

120 Hz. This channel is added to the channels for all bands with Dolby Digital or DTS to enhance

low frequency audio effects. This channel is labeled 0.1 because it is limited to only low frequency

audio.

Lip sync

Video output sometimes lags behind audio output due to the complexity of signal processing

caused by an increase in video signal capacity. Lip sync is a technique for automatically

correcting the timing lag between audio and video output.

Glossary of HDMI and video information

This is a glossary of the technical terms related to HDMI and video information used in

this manual.

Composite video signal

With the composite video signal system, color, brightness, and synchronization data signals are

combined and transmitted with a single cable.

Deep Color

Deep Color is a technology that HDMI specification supports. Deep Color increases the number of

available colors within the boundaries defined by the RGB or YCbCr color space. Conventional

color systems process the color using 8 bits. Deep Color processes the color with 10, 12, or 16

bits. This technology allows HDTVs and other displays to increase from millions of colors to

billions of colors and eliminate on-screen color banding for smooth tonal transitions and subtle

gradations between colors.

HDMI

HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/

video signal transmission. This interface transmits both digital audio and digital video signals

using a single cable without any loss. HDMI complies with HDCP (High-bandwidth Digital Content

Protection) and provides a secure audio/video interface. For further information on HDMI, visit the

HDMI website at “http://www.hdmi.org/”

x.v.Color

“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color

space than sRGB and allows the expression of colors that were not hitherto possible. While

remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color

space, and thus can produce more vivid, natural images.

Glossary of network information

This is a glossary of the technical terms related to network information used in this

manual.

SSID

SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.

Wi-Fi

Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or

connect to the Internet wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the

complexity of making connections with LAN cables by using wireless connection. Only products

that complete Wi-Fi Alliance interoperability tests can carry the “Wi-Fi Certified” trademark.

WPS

WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy

establishment of a wireless home network.

Glossary of Yamaha technologies

This is a glossary of the technical terms related to Yamaha technologies used in this

manual.

CINEMA DSP (Digital Sound Field Processor)

Since the surround sound systems were originally designed for use in movie theaters, their effect

is best experienced in a theater that has many speakers designed for acoustic effects. Since

home conditions (such as room size, wall material, and number of speakers) can differ so widely,

it is inevitable that there are differences in the sound that you hear. Based on a wealth of actually

measured data, CINEMA DSP, Yamaha’s original DSP technology provides the audiovisual

experience of a movie theater in your own home.

CINEMA DSP 3D

The actually measured sound field data contain the information of the height of the sound images.

CINEMA DSP 3D mode achieves the reproduction of the accurate height of the sound images so

that it creates the accurate and intensive 3D sound fields in a listening room.

145

Compressed Music Enhancer

The Compressed Music Enhancer feature compensates for missing harmonics in compression

music formats (such as MP3). As a result, this technology provides improved performance for the

overall sound system.

SILENT CINEMA

Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones.

Parameters for headphones have been set for each sound program, so that accurate

representations of all the sound programs can be enjoyed on headphones.

Virtual CINEMA DSP

Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround

speakers with front left and right speakers. Even if the surround speakers are not connected, the

unit creates the realistic sound field in a listening room.

Virtual Presence Speaker (VPS)

Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field

without presence speakers. Even if the presence speakers are not connected, the unit creates the

3D sound field in your room.

YPAO (Yamaha Parametric room Acoustic Optimizer)

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections,

measures the distances from them to your listening position(s), and then automatically optimizes

the speaker settings, such as volume balance and acoustic parameters, to suit your room.

Supported devices and file formats

Supported Bluetooth® devices

The following Bluetooth devices can be used by the unit.

• Bluetooth devices that support A2DP can be used.

• Operation of all Bluetooth devices cannot be guaranteed.

Supported USB devices

The following USB devices can be used by the unit.

• This unit is compatible with USB memory devices that are in FAT16 or FAT32 format.

Do not connect any other type of USB devices.

• USB devices with encryption cannot be used.

• Operation of all USB devices cannot be guaranteed.

Supported AirPlay devices

This AV Receiver is compatible with AirPlay 2. iOS 11.4 or later is required.

146

Supported file formats

The following file formats can be used by the unit.

File

Sampling

frequency

(kHz)

Quantization

bit (bit)

Bitrate (kbps)

Number of

channels

Support for

gapless

playback

WAV *

32/44.1/48/

88.2/96/

176.4/192

16/24/32 - 2

MP3

32/44.1/48 - 8 to 320 2 -

WMA

32/44.1/48 - 8 to 320 2 -

MPEG-4 AAC

32/44.1/48 - 8 to 320 2 -

FLAC

32/44.1/48/

88.2/96/

176.4/192

16/24 - 2

ALAC

32/44.1/48/

88.2/96

16/24 - 2

AIFF

32/44.1/48/

88.2/96/

176.4/192

16/24/32 - 2

DSD

2.8 MHz/

5.6 MHz/

11.2 MHz

1 - 2 -

* Linear PCM format only. 32 bit-float files cannot be played back.

• The playable file formats differ depending on the software installed on media

servers (PCs/NAS). Refer to the instruction manual of the server software for details.

• Digital Rights Management (DRM) contents cannot be played back.

Video signal flow

Video signals input from a video device to the unit are output to a TV as follows.

HDMIHDMI

VIDEOVIDEO

HDMI HDMI

VIDEO MONITOR OUT

Video device The unit TV

HDMI connection

Composite video connection

HDMI in HDMI out

VIDEO in VIDEO out

147

Additional information on HDMI

HDMI Control and synchronized operations

HDMI Control allows you to operate external devices via HDMI. If you connect a TV

that supports HDMI Control to the unit with an HDMI cable, you can control the unit

(such as power and volume) with TV remote control operations. You can also control

external devices (such as HDMI Control-compatible BD/DVD players) connected to

the unit with an HDMI cable.

Operations available from the TV’s remote control

• Standby

• Volume control including mute

• Switching to input audio from the TV when the TV input is switched to its built-in

tuner

• Switching to input video/audio from the selected playback device

• Switching between audio output devices (the unit or TV speaker)

(Example)

HDMI Control HDMI Control

The unit turns off

(standby)

Playback device

also turns off

Turn off the TV

Operations available from the unit’s remote control

• Starting playback on the playback device and turning on the TV with a scene

selection

• Switching the TV input to display the “Setup” menu (when SETUP is pressed)

• Controlling the external device from which video is displayed on the TV (playback

and menu operations)

• Controlling the TV when you select TV audio input that is set in “TV Audio Input” in

the “Setup” menu

• Controlling the TV with the color (RED/GREEN/YELLOW/BLUE) keys of the remote

control when “

TV Control” is set for the color keys

(Example)

HDMI Control HDMI Control

Press SCENE (BD/DVD)

Playback starts

Turns on and displays video

from the playback device

NOTE

▪ HDMI Control might not work properly.

▪ For details on the scene selection, see the following:

– “Selecting a registered scene” (p.73)

▪ For details on TV audio input, see the following:

– “Setting the audio jack used for TV audio input” (p.100)

▪ For details on the functions for the RED/GREEN/YELLOW/BLUE keys, see the following:

– “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control” (p.109)

To use HDMI Control, you need to perform the following HDMI Control link setup after

connecting the TV and playback devices.

For details on settings and operating your TV, refer to the instruction manual for the TV.

NOTE

This setup is required every time you add a new HDMI Control-compatible device to your system.

Turn on the unit, TV, and playback devices.

Enable the HDMI Control function on the unit, TV and HDMI

Control-compatible playback devices (such as BD/DVD players).

In order to enable the HDMI Control function on the unit, set “HDMI

Control

” in the “Setup” menu to “On”, and then configure the settings in

Yamaha RX-D485 El manual del propietario

Marca: Yamaha

Modelo: RX-D485

Categoría: Receptores AV

Tipo: El manual del propietario

Este manual también es adecuado para

RX-V485

Descargar PDF

informe

En otros idiomas

français: Yamaha RX-D485 Le manuel du propriétaire
italiano: Yamaha RX-D485 Manuale del proprietario
English: Yamaha RX-D485 Owner's manual
Deutsch: Yamaha RX-D485 Bedienungsanleitung
русский: Yamaha RX-D485 Инструкция по применению
Nederlands: Yamaha RX-D485 de handleiding
português: Yamaha RX-D485 Manual do proprietário
dansk: Yamaha RX-D485 Brugervejledning
svenska: Yamaha RX-D485 Bruksanvisning
Türkçe: Yamaha RX-D485 El kitabı
suomi: Yamaha RX-D485 Omistajan opas

Yamaha RX-D485 El manual del propietario

Este manual también es adecuado para

Yamaha RX-D485 El manual del propietario

En otros idiomas

Documentos relacionados

Otros documentos