Revised - 02/04/2022
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: [email protected]
www.omcan.com
Pasta Sheeters
Models PM-CN-0150, 0150-S
Items 44520, 46587
Instruction Manual
2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 5
-------------------------------------------------------------------------- 6
--------------------------------------------------------------------------------------------- 6
----------------------------------------------------------------------------------------- 7
----------------------------------------------------------------------------- 8 - 10
---------------------------------------------------------------------------- 11
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Operation
Maintenance
Parts Breakdown
Warranty Registration
Model PM-CN-0150 / Model PM-CN-0150-S
3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
4
General Information
Safety and Warranty
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
WARNING
• Please ensure that the voltage of the outlet matches that of the unit.
• Do not wear long sleeves, necklaces, hoods, or wear long hair loosely as it could cause a hazardous
situation.
• If the supply cord is damaged, it must be replaced by Omcan or one of it’s qualied service agents.
• The connection must be grounded.
5
Safety and Warranty
• For indoor use only.
• Ensure that children do not operate or play with the machine.
• To protect against risk of electrical shock do not put any part of the appliance in water or other liquid.
• Unplug from the outlet when not in use, before putting on or taking o parts, and before cleaning.
• Do not leave appliance unattended.
• Switch o the appliance before approaching parts which move in use.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as
possible.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop o to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without diculty.
In any case, for suitable recycling, we suggest disposing of the products separately (dierentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
6
Operation
BEFORE FIRST USE
Clean the machine with a clean, dry cloth before your rst use. In order to clean the roller and cutter, you can
pass a small quantity of dough through them several times. Then discard the dough.
TO USE
1. Cut the dough into manageable pieces with a knife.
2. Pull the knob and turn to “1”, let the two rollers completely open (about 2.5mm).
3. Put the two covers over the wide and narrow cutters, turn on the switch and pass a piece of dough through
the roller. Sprinkle some our on the dough if necessary.
4. Repeat the operation 2-3 times.
5. When the dough has taken a regular shape, adjust the knob to “2”. Then repeat until you achieve the
desired thickness.
6. Put the dough into the wide cutter to achieve wide noodles. Alternatively, put the dough into the narrow
cutter to achieve narrow noodles.
NOTE
• If the cutters can’t cut, it means the dough is too soft and you should pass the dough through the rollers
with our several times.
• If the dough is too hard and the machine can’t operate, please put the dough into a bowl and mix in more
water.
• The work time of the machine cannot exceed 15 minutes at a time.
• Do not adjust the knobs while the machine is in use.
Technical Specications
Model PM-CN-0150 PM-CN-0150-S
Color Red Silver
Electrical 120V / 60Hz / 1
Roller Width 5.75” / 146mm
Dimensions 11.5” x 9” x 11” / 293 x 228 x 278mm
Packaging Dimensions 11.7” x 9” x 11” / 298 x 233 x 283mm
Weight 16.5 lbs. / 7.5 kgs.
Packaging Weight 17.6 lbs. / 8 kgs.
Item Number 44520 46587
7
Maintenance
• Unplug the unit before cleaning and performing maintenance.
• Use a soft and dry cloth to clean the machine after use.
• Never wash the machine with water or in a dishwasher.
• Use a brush to clean the cutters and rollers after use.
• If necessary or if the rollers squeak, you can lubricate the rollers with food safe oil.
• Don’t insert knives or cloths in between the rollers.
• It is advisable to store the machine and accessories in the original box after using.
• All repairs are to be performed by a qualied technician.
• Do not dismantle the machine, doing so could be hazardous and void the warranty.
8
Parts Breakdown
Model PM-CN-0150 44520
Model PM-CN-0150-S 46587
9
Parts Breakdown
Model PM-CN-0150 44520
Item No. Description Position Item No. Description Position Item No. Description Position
AI993 Right Cover for 44520 1 AJ015 Roller Gear (2pc) for 44520 23 AJ037 Cutter Chief Axis (2), Cutter Auxiliary (2)
for 44520 45
AI994 Gear Rack I, Screw (6pc), Spring Pad
(6pc), Flat Pad (6pc) for 44520 2 AJ016 Adjusting Bracket, Nut (2pc), Wedge
(21pc) for 44520 24 AJ038 150 Scraping Knife (2pc) for 44520 46
AI995
One Stage Transmission Gear, Two
Stage Transmission Gear, Three Stage
Transmission Gear (4pc) for 44520
3 AJ017 Eccentric Shaft for 44520 25 AJ039 Combs 6 (2pc) for 44520 47
AI996 Gear Shaft II, Steering Ring (1pc) for
44520 4 AJ018 Left Cover Frame, Screw (2pc), Grooved
Metal Gasket (2pc) for 44520 26 AJ040 Combs 2 (2pc) for 44520 48
AI997 Gear Shaft I, Cylindrical Pin (1pc) for
44520 5 AJ019 Switch Frame, Tapping Screw with Pad
(2pc) for 44520 27 AJ041 Lampstand for 44520 49
AI998 Shore III (6pc) for 44520 6 AJ020 Touch Switch, Tapping Screw (2pc) for
44520 28 AJ042 Breathable Sheet for 44520 50
AI999 Binding Bolt M5 (2pc) for 44520 7 AJ021 Switch for 44520 29 AJ043 Bottom Board (2pc), Self Tapping Screw
(4pc) for 44520 51
AJ000 Eccentric Shaft for 44520 8 AJ022 Left Cover, Tapping Screw (2pc) for
44520 30 AJ044 Straw (4pc), Self Tapping Screw (4pc)
for 44520 52
AJ001 M6 Long Double Threaded Screw (2pc)
for 44520 9 AJ023 Adjusting Plate for 44520 31 AJ045
Gear Rack II, Nut (3pc), Screw (2pc),
Spring Pad (5pc), Flat Pad (5pc) for
44520
53
AJ002 M5 Long Double Threaded Screw for
44520 10 AJ024 Adjusting Handle, Screw (1pc) for 44520 32 AJ046 Inserts (11pc) for 44520 54
AJ003 Electric Motor, Screw (6pc), Spring Pad
(4pc) for 44520 11 AJ025 Round Spring for 44520 33 AJ047 Short Sleeve for 44520 55
AJ004 Right Bracket for 44520 12 AJ026 Button Switch (Four Second) for 44520 34 AJ048 Gear Shaft III (3pc), Cylindrical Pin (3pc)
for 44520 56
AJ005 Axle Sleeve (2pc) for 44520 13 AJ027 Power Line Deduction (6N-4) for 44520 35 AJ049 Shore I (3pc) for 44520 57
AJ006 Eccentric Bushing for 44520 14 AJ028 Screw Hole Pillar (2pc) for 44520 36 AJ050 Shore II (2pc) for 44520 58
AJ007 Surface Cover (2pc) for 44520 15 AJ029 Power Line for 44520 37 AJ051 Layer of Output Shaft, Cylindrical Pin
(2pc), Adjusting Wedge for 44520 59
AJ008
Cover of Forearm, Cover of Rear Arm,
Cover of Left Arm, Cover of Right Arm,
Screw (4pc) for 44520
16 AJ030
Wiring Terminal, Connecting Line I,
Connecting Line II, Connecting Line III,
Tapping Screw (2pc) for 44520
38 AJ052 Dowel (2pc), Distance Piece for 44520 60
AJ009 Front Bafe for 44520 17 AJ031 Wire Holder, Screw (2pc) for 44520 39 AJ053 Output Gear, Mid Gear, Helical Gear
for 44520 61
AJ010 Mid Bafe for 44520 18 AJ032 Rubber Sleeve for 44520 40 AJ054 Gear Rack III, Screw (5pc), Spring Pad
(5pc) for 44520 62
AJ011 Small Intermediate Bafe for 44520 19 AJ033 Roller Spring Clip (2pc) for 44520 41 AJ055 Fixed Plate Set (4pc) for 44520 63
AJ012 Back Bafe for 44520 20 AJ034 Cutter Spring Clip (2pc) for 44520 42 AJ056 Damping Pad (5pc) for 44520 64
AJ013 Left Bracket for 44520 21 AJ035 Roller Chief Axis, Roller Auxiliary Axis,
Bulkhead for 44520 43 AJ057 Motor Cover for 44520 65
AJ014 Cutter Gear (4pc), Axial Ring File (4pc)
for 44520 22 AJ036 Cutter Chief Axis (6), Cutter Auxiliary (6)
for 44520 44
10
Parts Breakdown
Model PM-CN-0150-S 46587
Item No. Description Position Item No. Description Position Item No. Description Position
AJ058 Right Cover for 46587 1 AJ015 Roller Gear (2pc) for 46587 23 AJ037 Cutter Chief Axis (2), Cutter Auxiliary (2)
for 46587 45
AI994 Gear Rack I, Screw (6pc), Spring Pad
(6pc), Flat Pad (6pc) for 46587 2 AJ016 Adjusting Bracket, Nut (2pc), Wedge
(21pc) for 46587 24 AJ038 150 Scraping Knife (2pc) for 46587 46
AI995
One Stage Transmission Gear, Two
Stage Transmission Gear, Three Stage
Transmission Gear (4pc) for 46587
3 AJ017 Eccentric Shaft for 46587 25 AJ039 Combs 6 (2pc) for 46587 47
AI996 Gear Shaft II, Steering Ring (1pc) for
46587 4 AJ018 Left Cover Frame, Screw (2pc), Grooved
Metal Gasket (2pc) for 46587 26 AJ040 Combs 2 (2pc) for 46587 48
AI997 Gear Shaft I, Cylindrical Pin (1pc) for
46587 5 AJ019 Switch Frame, Tapping Screw with Pad
(2pc) for 46587 27 AJ061 Lampstand for 46587 49
AI998 Shore III (6pc) for 46587 6 AJ020 Touch Switch, Tapping Screw (2pc) for
46587 28 AJ042 Breathable Sheet for 46587 50
AI999 Binding Bolt M5 (2pc) for 46587 7 AJ021 Switch for 46587 29 AJ043 Bottom Board (2pc), Self Tapping Screw
(4pc) for 46587 51
AJ000 Eccentric Shaft for 46587 8 AJ060 Left Cover, Tapping Screw (2pc) for
46587 30 AJ044 Straw (4pc), Self Tapping Screw (4pc)
for 46587 52
AJ001 M6 Long Double Threaded Screw (2pc)
for 46587 9 AJ023 Adjusting Plate for 46587 31 AJ045
Gear Rack II, Nut (3pc), Screw (2pc),
Spring Pad (5pc), Flat Pad (5pc) for
46587
53
AJ002 M5 Long Double Threaded Screw for
46587 10 AJ024 Adjusting Handle, Screw (1pc) for 46587 32 AJ046 Inserts (11pc) for 46587 54
AJ003 Electric Motor, Screw (6pc), Spring Pad
(4pc) for 46587 11 AJ025 Round Spring for 46587 33 AJ047 Short Sleeve for 46587 55
AJ004 Right Bracket for 46587 12 AJ026 Button Switch (Four Second) for 46587 34 AJ048 Gear Shaft III (3pc)-Cylindrical Pin (3pc)
for 46587 56
AJ005 Axle Sleeve (2pc) for 46587 13 AJ027 Power Line Deduction (6N-4) for 46587 35 AJ049 Shore I (3pc) for 46587 57
AJ006 Eccentric Bushing for 46587 14 AJ028 Screw Hole Pillar (2pc) for 46587 36 AJ050 Shore II (2pc) for 46587 58
AJ007 Surface Cover (2pc) for 46587 15 AJ029 Power Line for 46587 37 AJ051 Layer of Output Shaft, Cylindrical Pin
(2pc), Adjusting Wedge for 46587 59
AJ059
Cover of Forearm, Cover of Rear Arm,
Cover of Left Arm, Cover of Right Arm,
Screw (4pc) for 46587
16 AJ030
Wiring Terminal, Connecting Line I,
Connecting Line II, Connecting Line III,
Tapping Screw (2pc) for 46587
38 AJ052 Dowel (2pc), Distance Piece for 46587 60
AJ009 Front Bafe for 46587 17 AJ031 Wire Holder, Screw (2pc) for 46587 39 AJ053 Output Gear, Mid Gear, Helical Gear
for 46587 61
AJ010 Mid Bafe for 46587 18 AJ032 Rubber Sleeve for 46587 40 AJ054 Gear Rack III, Screw (5pc), Spring Pad
(5pc) for 46587 62
AJ011 Small Intermediate Bafe for 46587 19 AJ033 Roller Spring Clip (2pc) for 46587 41 AJ055 Fixed Plate Set (4pc) for 46587 63
AJ012 Back Bafe for 46587 20 AJ034 Cutter Spring Clip (2pc) for 46587 42 AJ056 Damping Pad (5pc) for 46587 64
AJ013 Left Bracket for 46587 21 AJ035 Roller Chief Axis, Roller Auxiliary Axis,
Bulkhead for 46587 43 AJ057 Motor Cover for 46587 65
AJ014 Cutter Gear (4pc), Axial Ring File (4pc)
for 46587 22 AJ036 Cutter Chief Axis (6), Cutter Auxiliary (6)
for 46587 44
11
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
https://omcan.com/warranty-registration/
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No
Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour diusion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 6,500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 6500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 6,500 productos con origen a nivel mundial.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
En otros idiomas
- français: Omcan PM-CN-0150 Manuel utilisateur
- English: Omcan PM-CN-0150 User manual
Documentos relacionados
-
Omcan BE-CN-2083-CSS Manual de usuario
-
Omcan TS-IT-0150 Manual de usuario
-
Omcan JE-CN-0020 Manual de usuario
-
Omcan MX-CN-0127 Manual de usuario
-
Omcan MG-CN-0032-M Meat Grinders Manual de usuario
-
-
Omcan CE-TW-0356 Manual de usuario
-
Omcan MX-CN-0037 Manual de usuario
-
Omcan 24242 Manual de usuario
-
