Snom Vision Guía de inicio rápido

Marca: Snom

Modelo: Vision

Tipo: Guía de inicio rápido

Quick Start Guide

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

v1.01

snom technology AG

Charlottenstr. 68-71

10117 Berlin, Deutschland

Tel. +49 30 39 83 3-0

Fax +49 30 39 83 31 11

[email protected]; s[email protected]

snom technology, Inc.

100 Cummings Center, Suite 125-G

Beverly, MA 01915, USA

Tel. 978-998-7882

Fax 978-998-7883

infoU[email protected]

snom France SARL

6 Parc des fontenelles

78870 Bailly, France

Tel. +33 1 80 87 62 87

Fax +33 1 80 87 62 88

[email protected]; s[email protected]

snom technology SRL

Via A. Lusardi 10

20122 Milano, Italia

Tel +39 02 00611212

Fax +39 02 93661864

[email protected]; s[email protected]

Your specialist retailer - Ihr Fachhändler -

Votre distributeur - Su distribuidor - Il tuo rivenditore:

· Detaching/attaching

· Abmontieren/montieren

· Démonter/attacher

· Desmontar/montaje

· Smantellare/fissare

BConnecting - Anschließen -

Connecter - Connectar - Collegare

NET

If PoE not available

Wenn PoE nicht verfügbar

S'il n'y a pas de PoE

Si no se dispone de PoE

Se non disponibile PoE

PoE

5V DC

Delivery content - Lieferumfang - Contenu de l‘emballage -

En la caja - Contenuto della confezione - Incluídos no pacote

Quick Start Guide

english

deutsch

FranÇais

italiano

espaÑol

v1.00

snom technology AG

Charlottenstr. 68

10117 Berlin

Germany

Tel. +49 30 39 83 3-0

Fax +49 30 39 83 31 11

[email protected]; [email protected]

snom technology, Inc.

100 Cummings Center, Suite 125-G

Beverly, MA 01915

Tel. 978-998-7882

Fax 978-998-7883

[email protected]

snom France SARL

6 Parc des fontenelles

78870 Bailly

Tel. +33 1 80 87 62 87

Fax +33 1 80 87 62 88

[email protected]

snom technology SRL

Via A. Lusardi 10

20122 Milano

Tel +39 02 00611212

Fax +39 02 93661864

[email protected]

Your specialist retailer - Ihr Fachhändler -

Votre distributeur - Su distribuidor - Il tuo rivenditore:

•

If available - falls verfügbar - si disponible - si disponibile - si está disponible:

• Additional extensions + lines

• Weitere Nebenstellen + Leitungen

• Autres postes supplémentaires + lignes

extérieures

• Interni y linee aggiuntive

• Extensiónes y líneas

adicionales





At a glance - Auf einen Blick - D'un seul coup d'oeil -

In sintesi - De un vistazo

• Extension or line

• Nebenstelle oder Leitung

• Poste supplémentaire ou ligne

extérieure

• Interno o linea

• Extensión o línea

snom Vision Quick Start Guide

ENGLISH ................................................................................................................ 5

Initializing and registering via DHCP  Conﬁgurating

DEUTSCH ............................................................................................................... 9

Initialisierung und Registrierung über DHCP  Einstellungen

FRANÇAIS ............................................................................................................. 13

Initilisation et enrégistrement avec DHCP  Conﬁgurer les paramètres

ITALIANO ................................................................................................................ 17

Inizializzazione e registrazione tramite DHCP  Impostazioni

ESPAÑOL ............................................................................................................... 21

Inicialización e registración sin DHCP  Conﬁguración

APPENDICES · ANLAGEN · ANNEXES · APENDICI · ANEXOS

1. Initializing and registering without DHCP  Initialisierung und Registrierung

ohne DHCP  Initilisation et enrégistrement sans DHCP  Inizializzazione e

registrazione senza DHCP  Inicialización e registración sin DHCP

2. GNU General Public License .................................................................................. 27

snom Vision Quick Start Guide

This quick start guide describes the installation and setup of the snom Vision.

For further information please refer to the manual on our web page,

http://wiki.snom.com/Accessories/snom_Vision

snom, the names of snom products, and snom logos are trademarks owned by snom tech-

nology AG. All other product names and names of enterprises are the property of their

respective owners.

snom technology AG reserves the right to revise and change this document at any time,

without being obliged to announce such revisions or changes beforehand or after the fact.

Texts, images, and illustrations and their arrangement in this document are subject to the

protection of copyrights and other legal rights worldwide. Their use, reproduction, and

transmittal to third parties without express written permission may result in legal procee-

dings in the criminal courts as well as civil courts.

Although due care has been taken in the compilation and presentation of the information in

this document, the data upon which it is based may have changed in the meantime. snom

therefore disclaims all warranties and liability for the accurateness, completeness, and cur-

rentness of the information published, except in the case of intention or gross negligence

on the part of snom or where liability arises due to binding legal provisions.

Our ﬁrmware includes some source code that may be used and modiﬁed by anyone and

everyone under the GNU Public License (GPL) (see Appendix on page ), provided they, in

turn, make it available to everyone else with the same licensing agreement. Please go to

http://www.snom.com/en/support/download/gpl-quellcode/ for the original GPL license

and the source code of components licensed under GPL and used in snom products.

snom Vision Quick Start Guide

Important Information

Please read the instructions on safety and disposal and on how to set up and use the de-

vice before using it and also give them to other users to read or inform those users of their

contents. Save this manual and do not give the device to third parties without it.

Safety Instructions

Follow the instructions in this manual and other applicable documentation of the device.

• If the phone is not supplied with power via an Ethernet cable, use only the power

adapter included in the package or one expressly recommended by snom technology.

Other power supplies may damage or destroy the phone, affect its behavior, or induce

noise.

• Avoid placing the cables where people may trip over them or where they may be expo-

sed to mechanical pressure as this may damage them.

• This device is for indoor use only! Do not install outdoors - NOT FOR OUTDOOR

USE!

• Do not install the device in rooms with high humidity (for example, in bathrooms,

laundry rooms, damp basements). Do not immerse the device in water and do not spill

or pour liquids of any kind onto or into the device.

• Do not install the device in surroundings at risk for explosions (paint shops, for examp-

le). Do not use the device if you smell gas or other potentially explosive fumes.

• Do not use the device during thunderstorms. Lightning striking the power grid may

cause electric shocks.

SELV (Safety Extra Low Voltage) Compliance

Safety status of Input/Output connections comply with SELV requirements.

Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV)

circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV cir-

cuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use

RJ-45 (8P8C) connectors. Use caution when connecting cables.

snom Vision Quick Start Guide

Standards conformance

This device is CE and FCC-certiﬁed and meets European and US health,

safety, and environmental standards.

Unauthorized opening, changing, or modifying the device will cause the

warranty to lapse and may also result in the lapse of the CE and FCC certi-

ﬁcations. In case of malfunction contact authorized service personnel, your

seller, or snom.

• Safety: IEC 60950-1:2005

• Certiﬁcations: FCC Class B, CE Mark

• Power consumption: 2.5 - 7 watts (without USB peripherals)

• Power: 5 V DC

• 1 x LAN: RJ45 (Ethernet) 1 x 10/100 Mbps

• Power over Ethernet: IEEE 802.3af, Class 2

• USB connector slots: 2 x type A, 1 x type B

Disposal of the device

This device is subject to European Directive 2002/96/EC and may not be

disposed of with general household garbage.

If you do not know where you may dispose of the device at the end of its

lifespan, contact your municipality, your local waste management provider,

or your seller.

Cleaning

To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might

damage the surface or internal electronics of the device.

snom Vision Quick Start Guide

Initializing and registering

Normally the initialization and registration is completely automatic, using DHCP.

If your network does not support DHCP, see page 25.

Conﬁguring the settings

Open a web browser on your PC. Enter the snom Vision's IP address in the address bar

and press ENTER to open its web interface. Example: http://10.10.10.115. Make entries

as necessary. Press to save and move the cursor to the next ﬁeld.

Image: Click on the image to open the

window for uploading an image ﬁle or

deleting the current image

Number: Enter extension number or

outside phone number

Name: Enter the name or number to be

shown on the display

Select image to upload: Enter the

URL of the image ﬁle and click on

"Upload"

Phone IP: IP address of the phone you are

connecting to the expansion module

User & Password: The user name and

password for the web interface of the phone.

Leave blank if none have been set.

Identity for outgoing calls: Optional. If

none is set the current outgoing identity of

the phone will be used.

snom Vision Quick Start Guide

Diese Kurzanleitung beschreibt die Installation, Einrichtung und den Betrieb

des snom Vision. Weitere Informationen ﬁnden Sie auf unserer Webseite,

http://wiki.snom.com/Accessories/snom_Vision

Alle Rechte reserviert.

snom sowie die Namen der snom-Produkte und die snom logos sind gesetzlich geschützte

Marken der snom technology AG. Alle anderen Produkt- und Firmennamen sind Marken

der jeweiligen Inhaber.

snom technology AG behält sich jederzeit das Recht auf Überarbeitung und Änderung

dieses Dokumentes vor, ohne verpﬂichtet zu sein, die vorgenommenen Änderungen anzu-

kündigen oder mitzuteilen.

Texte, Bilder, Graﬁken und deren Anordnung in diesem Dokument unterliegen weltweit

dem Schutz des Urheberrechts und anderen Schutzgesetzen. Ihre Verwendung, Repro-

duktion oder Weitergabe ohne ausdrückliche schriftliche Zustimmung der snom technolo-

gy AG können sowohl straf- als auch zivilrechtlich verfolgt werden.

Trotz der angewandten Sorgfalt bei der Zusammenstellung und Präsentation der Informa-

tionen in diesem Dokument können sich Daten zwischenzeitlich geändert haben. Daher

übernimmt snom keine Gewähr für die Richtigkeit, Vollständigkeit oder Aktualität der zur

Verfügung gestellten Informationen. Jegliche Haftung für Schäden ist ausgeschlossen, so-

fern diese nicht auf Vorsatz oder grober Fahrlässigkeit auf seiten von snom beruhen oder

sofern keine Haftung aufgrund zwingender gesetzlicher Bestimmungen eintritt.

Unsere Firmware enthält teilweise Quellcodes, die unter der GNU Public License (GPL)

von jedermann genutzt und modiﬁziert werden dürfen, solange sie wiederum mit denselben

Lizenzbedingen zur allgemeinen Nutzung veröffentlicht werden. Die Quellcodes der von

snom genutzten und der GPL unterliegenden Komponenten können Sie auf der Support-

seite unserer Webseite auf www.snom.com, den Wortlaut der GPL auf http://www.snom.

com/de/support/download/gpl-quellcode/ herunterladen.

snom Vision Quick Start Guide

Wichtige Hinweise

Lesen Sie bitte vor Inbetriebnahme die Sicherheitshinweise und die Bedienungsanleitung.

Lassen Sie sie auch von den Mitbenutzern des Gerätes lesen oder informieren Sie sie

über deren Inhalt. Bewahren Sie diese Bedienungsanleitung auf und geben Sie das Tele-

fon nur mit der Bedienungsanleitung an Dritte weiter..

Sicherheit

Befolgen Sie die Anweisungen in dieser Bedienungsanleitung und in der sonstigen Doku-

mentation des Geräts.

• Falls die Stromversorgung nicht über das Ethernetkabel erfolgt, verwenden Sie nur das

mitgelieferte Netzteil. Die Verwendung anderer Netzteile könnte das Telefon beschädi-

gen oder gar zerstören.

• Vermeiden Sie es, die Netz- und Stromkabel so zu verlegen, dass sie durch mechani-

schen Druck beschädigt werden oder dass Personen darüber stolpern könnten.

• Dieses Gerät ist nur für den Gebrauch in Innenräumen bestimmt - NICHT FÜR DEN

AUSSENBEREICH!

• Stellen Sie das Telefon nicht in Räumen mit hoher Luftfeuchtigkeit wie z.B. Bade-

zimmern, Waschküchen, feuchten Kellerräumen auf. Tauchen Sie das Telefon nicht in

Wasser und gießen Sie keine Flüssigkeiten auf oder in das Gerät.

• Stellen Sie das Telefon nicht in explosionsgefährdeten Umgebungen (z.B. Lackiereien)

auf. Benutzen Sie das Telefon nicht, wenn Sie Gas oder andere möglicherweise explo-

sionsgefährliche Dämpfe riechen.

• Telefonieren Sie nicht während eines Gewitters (Stromschlaggefahr bei Blitzeinschlag

ins Netz).

SELV (Safety Extra Low Voltage) Einhaltung

Die Eingangs-/Ausgangsverbindungen halten die SELV-Richtlinien für Kleinspannungsge-

räte ein.

Warnung: Um elektrische Schläge zu vermeiden, verbinden Sie keine SELV-Geräte

mit Geräten, die Telefon-/Netzwerk-Spannung (TNV) führen. Nur an LAN-Ports

anschließen!

snom Vision Quick Start Guide

Normkonformität

Dieses Gerät ist CE- und FCC-geprüft und entspricht den geltenden euro-

päischen und US-amerikanischen Richtlinien.

Die eigenmächtige Öffnung des Geräts sowie Änderungen und Modiﬁzie-

rungen am Gerät führen zum Erlöschen der Gewährleistungspﬂicht und

können darüberhinaus zum Erlöschen der Zulassungen führen. Wenden Sie

sich bei Betriebsstörungen oder Defekten an authorisiertes Servicepersonal,

an Ihren Verkäufer oder an snom.

• Sicherheit: IEC 60950-1:2005

• Zertiﬁkate: FCC Class B, CE Mark

• Stromspeisung: Über Netzwerk (PoE, IEEE 802.3af, Klasse 2) oder Netzteil 5 V DC

• Leistungsaufnahme: 2,5 - 7 Watt (ohne USB-Peripheriegeräte)

• 1 x LAN: RJ45 (Ethernet) 1 x 10/100 Mbps

• USB-Anschlüsse: 2 x Typ A, 1 x Typ B

Entsorgung des Produkts

Dieses Gerät unterliegt der europäischen Richtlinie 2002/96/EG und darf

nicht im Hausmüll entsorgt werden.

Wenn Sie nicht wissen, wo Sie Ihr Altgerät entsorgen können, wenden

Sie sich bitte an Ihre Kommune, Ihren örtlichen Müllentsorger oder Ihren

Fachhändler.

Reinigung

Benutzen Sie ein antistatisches Tuch. Benutzen Sie kein Wasser und keine Reinigungs-

ﬂüssigkeiten, da sie die Oberﬂäche und die Elektronik des Gerätes beschädigen könnten.

snom Vision Quick Start Guide

Initialisierung und Registrierung

Die Initialisierung und Registrierung erfolgt normalerweise automatisch über DHCP.

Falls DHCP in Ihrem Netzwerk nicht zur Verfügung steht, siehe Seite 25.

Einstellungen

Öffnen Sie den Webbrowser Ihres PCs, tippen Sie http:// und die IP-Adresse in die Ad-

resszeile (z. B. http://10.10.10.115) und drücken Sie auf die Eingabe-Taste, um die Web-

seite des snom Vision zu öffnen. Nehmen Sie die erforderlichen Eingaben vor. Drücken Sie

auf , um zu speichern und in das nächste Eingabefeld zu gelangen.

Image: Klicken Sie auf die Bildﬂäche, um das

Fenster zum Herunterladen oder Löschen einer

Bilddatei zu öffnen

Number: Geben Sie die Nummer einer Nebenstelle

oder eines externen Anschlusses ein

Name: Geben Sie den Namen oder die Nummer

ein, die auf dem Bildschirm angezeigt werden sollen

Phone IP: IP-Adresse desTelefons, an das Sie das

Erweiterungsmodul anschließen

User & Password: Benutzername und Kennwort

zum Öffnen des Webbrowsers des Telefons, falls

erforderlich

Identity for outgoing calls: Identität für ausge-

hende Anrufe. Wenn Sie keine Identität eingeben,

wird die jeweilige ausgehende Identität des Telefons

genommen.

Select image to upload: Geben Sie die

URL der Bilddatei ein und klicken Sie auf

"Upload"

Delete Image: Klicken Sie auf "Delete", um

das derzeitige Bild zu löschen

snom Vision Quick Start Guide

Ce manuel abrégé décrit l‘installation, l‘initialisation et la mise en service du

snom Vision. Consultez notre site web pour des informations complémen-

taires:

http://wiki.snom.com/Accessories/snom_Vision

snom, les noms des produits snom et les logos snom sont des marques déposées par

snom technology AG. Tous les autres noms de produits et noms d‘entreprises sont les

propriétés de leurs détenteurs respectifs.

snom technology AG se réserve le droit de modiﬁer et de changer ce document à

n‘importe quel moment, sans devoir annoncer de telles modiﬁcations ou changements

avant ou après leur mise en place.

Les textes, images et illustrations ainsi que leur mise en page dans ce document sont

protégés par les copyrights et autres dispositions légales internationales. Leur utilisation,

leur reproduction et leur transmission à des parties tierces sans accord express écrit peut

induire des poursuites devant les cours criminelles et civiles.

Bien que le plus grand soin ait été apporté à la compilation et à la présentation des

informations contenues dans ce document, les données sur lesquelles elles sont basées

peuvent entre-temps avoir été modiﬁées. snom doit donc décliner toute garantie et toute

responsabilité quand à l‘exactitude et à l‘exhaustivité des informations publiées excepté en

cas de négligence ﬂagrante de la part de snom ainsi que des les cas ou la responsabilité

de snom est engagée de par la loi.

Notre ﬁrmware inclus des éléments de code source qui peuvent être utilisés et modiﬁé par

quiconque selon les termes des licences GPL (cf. page 110), à condition qu‘à leurs tours

ils les rendent disponibles selon les mêmes termes. Veuillez vous rendre sur http://www.

snom.com/de/support/download/gpl-quellcode/ pour consulter la licence GPL originelle

et le code source des composants couverts par la licence GPL qui sont utilisé dans les

produits snom.

snom Vision Quick Start Guide

Informations importantes

Veuillez lire les informations concernant la sécurité et la mise au rebut de l‘appareil ainsi

que celles concernant son installation et son utilisation avant d‘utiliser l‘appareil. Commu-

niquez également ces informations aux autres utilisateurs ou faites-les leur lire. Conservez

ce manuel et ne cédez pas l‘appareil à une tierce partie sans y joindre le manuel.

Sécurité

Suivez les instructions présentes dans ce manuel et dans les autres documents con-

cernant l‘appareil.

• Evitez de placer le câble d‘alimentation de l‘appareil dans un endroit ou il est possi-

ble de trébucher dessus. Evitez également de le placer là ou il pourrait être exposé à

un écrasement car il pourrait en être endommagé. Si le cordon d‘alimentation ou la

ﬁche sont endommagés, débranchez l‘appareil et contactez du personnel d‘entretien

qualiﬁé.

• Cet appareil est destiné à une utilisation en intérieur uniquement! Ne l‘installez pas au

dehors!

• N‘installez pas l‘appareil dans des pièces très humides (par exemple, dans une salle

de bain, une buanderie ou un sous-sol humide). N‘immergez pas l‘appareil dans l‘eau

et ne versez pas de liquides d‘aucune sorte sur ou dans l‘appareil.

• N‘installez pas l‘appareil dans un lieu présentant un risque d‘explosion (un magasin

de peinture par exemple). N‘utilisez pas l‘appareil si vous sentez une odeur de gaz ou

d‘autres émanations potentiellement explosives.

• N‘utilisez pas l‘appareil durant les orages, le choc d‘un éclair sur les circuits élec-

triques peut provoquer une électrocution.

Conforme à T.B.T.S (Très Basse Tension de Sécurité)

Le niveau de sécurité des connexions d‘entré/sortie est conforme aux recommandations

T.B.T.S (SELV).

Avertissement : Pour éviter les électrocutions, ne connectez pas les circuits de

SELV / TBTS aux circuits sous tension du réseau téléphonique (TNV). Ne connec-

tez le câble NET/Ethernet qu‘à un port LAN!

snom Vision Quick Start Guide

Conformité au standards

Cet appareil est certiﬁé CE et FCC et répond aux standards environnemen-

taux, de sécurité et de santé européens et américains.

L‘ouverture, la modiﬁcation ou le remplacement sans autorisation de

l‘appareil annule la garantie et peut également annuler les certiﬁcations CE

et FCC. En cas de mauvais fonctionnement, veuillez contacter le personnel

d‘entretien agrée, votre revendeur ou bien snom.

• Sécurité: IEC 60950-1:2005

• Certiﬁcat: FCC Class B, CE Mark

• Consommation d´énergie: 2,5 - 7 Watts (sans périphériques informatiques US)

• Alimentation: Par transformation 5 V DC ou PoE (Power over Ethernet) IEEE 802.3af,

Classe 2

• 1 x LAN: RJ45 (Ethernet) 1 x 10/100 Mbps

• Connecteurs USB: 2 x type A, 1 x type B

Mise au Rébut du Produit

Cet appareil est soumis à la Directive 2002/96/CE et ne peut être mis au

rebut avec les déchets ménagers normaux.

Si vous ne savez pas ou mettre au rebut oú faire recycler l‘appareil lorsqu‘il

arrive au terme de son existence, contactez votre municipalité, la société

locale en charge de la gestion des déchets ou votre vendeur.

Nettoyage

Utilisez un tissu antistatique. N‘utilisez pas de l‘eau ou un produit de nettoyage liquide ou

solide. Ils peuvent endommager l‘éléctronique ou les sufaces de l‘appareil.

snom Vision Quick Start Guide

Initialisation et enrégistration

L‘initialisation et l'enrégistration est normalement fait automatiquement via DHCP.

Si votre réseau ne supporte pas le protocole DHCP , voir la page 25 .

Conﬁgurer les paramètres

Ouvrez le navigateur web de votre PC et saisissez l'adresse IP de l'appareil dans la barre

d'adresse. Example: http://10.10.10.115. Appuyez sur la touche d'entrée pour ouvrir la

page d'accueil de l'interface Web de l'appareil. Appuyez sur pour sauvegarder votre

modiﬁcations et deplacer le curseur dans le champ suivant.

Image: Cliquez sur l'image pour ouvrir la fenêtre

pour le téléchargement d'un ﬁchier image ou la sup-

pression de l'image courante

Number: Entrez le numéro de poste ou le numéro

de téléphone à l'extérieur

Name: Entrez le nom ou le numéro doit être indiqué

sur l'écran

Phone IP: Adresse IP du télephone à laquelle vous

voulez registrer le module snom Vision

User & Password: Le nom d'utilisateur et mot de

passe pour l'interface web du téléphone. Laissez vide

si aucun n'a été ﬁxé.

Identity for outgoing calls: L'identité pour les

appels sortants. Si aucun n'est déﬁni, l'identité sortant

du téléphone sera utilisé.

Select image to upload: Entrez l'URL

de l'image ﬁchier à télécharger et cliquez sur

"Upload"

Delete Image: Cliquez sur "Delete" pour

supprimer l'image actuelle

snom Vision Quick Start Guide

Questa è la guida rapida per l‘installazione, l‘impostazione e il funzionamento

dello snom Vision. Per ulteriori informazioni consultare la nostra pagina web:

http://wiki.snom.com/Accessories/snom_Vision

lita

snom, i nomi dei prodotti snom, ed i loghi snom sono marchi registrati di proprietà di snom

technology AG. Tutti gli altri nomi di prodotti e di imprese sono proprietà dei rispettivi

proprietari.

snom technology AG si riserva il diritto di rivedere e modiﬁcare il presente documento in

qualsiasi momento senza alcun obbligo di notiﬁca precedente o posteriore a tali cambia-

menti.

Testi, immagini ed illustrazioni ed il loro ordine in questo documento sono soggetti a pro-

tezione del diritto d’autore ed altri diritti legali a livello mondiale. Il loro utilizzo, riproduzione

e trasmissione a terzi senza il permesso scritto potrebbe dar luogo ad azioni legali, in sede

penale e civile.

Sebbene sia stata prestata la massima attenzione nella stesura e presentazione delle

informazioni in questo documento, i dati su cui si basa potrebbero già aver subito variazi-

oni. snom pertanto declina ogni responsabilità riguardo a tutte le garanzie di afﬁdabilità,

accuratezza, completezza ed attualità delle informazioni pubblicate, tranne nel caso di

grossolana negligenza da parte di snom o laddove per legge è ritenuta responsabile.

Il nostro ﬁrmware include codice sorgente utilizzabile e modiﬁcabile da chiunque. La

licenza pubblica GNU (GPL) (cfr. pag. 92), consente di rendere disponibile il software

con lo stesso accordo di licenza. Visitate http://www.snom.com/de/support/download/

gpl-quellcode/ per la licenza GPL originale e per i codici di sorgente di componenti sotto

licenza GPL ed utilizzati in prodotti snom.

snom Vision Quick Start Guide

Informazioni importanti

Pregasi leggere con attenzione le istruzioni inerenti la sicurezza, lo smaltimento e

l‘installazione del dispositivo prima del suo impiego. Tali informazioni vanno condivise con

gli altri utenti. È altresì necessario conservare questo manuale, consegnandolo insieme al

dispositivo qualora esso venga dato a terzi.

Sicurezza

Seguite le istruzioni in questo manuale e tutta la documentazione relativa al dispositivo.

• Utilizzate solo l’adattatore del dispositivo. Altri adattatori di corrente potrebbero

danneggiare, anche irreversibilmente, il dispositivo soggetto a pressione meccanica

ed il cavo. Se il cavo o la spina si danneggiano, scollegare il dispositivo e contattare il

personale di assistenza qualiﬁcato.

• Non posizionare il cavo di corrente del telefono dove può essere calpestato. Non

posizionare il cavo di corrente del telefono dove può essere soggetto a pressione

meccanica perchè potrebbe danneggiare il cavo. Se il cavo o la spina si danneggiano,

scollegare il telefono e contattare il personale di assistenza qualiﬁcato.

• Questo apparecchio si può impiegare solo al chiuso! Non installare all‘aperto!

• Non installare il dispositivo in ambienti con alta umidità (ad es., in bagno, lavanderia,

seminterrati umidi). Non immergere il dispositivo in acqua e non versarvi liquidi sopra

• Non installare il dispositivo nei pressi di locali a rischio esplosione (coloriﬁci, ad es.).

Non utilizzare il dispositivo se sentite odore di gas o di altra esalazione potenzialmente

esplosiva.

• Non utilizzare il dispositivo durante i temporali. Qualora un fulmine colpisca la rete

elettrica, è passibile di scossa.

Conforme al circuito SELV (bassissima tensione di sicurezza)

Il nivello di scurezza dei circuiti in ingresso / uscita è conforme alle raccomandazioni SELV.

Attenzione: Per evitare scosse elettriche non collegare i circuiti SELV a quelli della

rete telefonica (TNV). Le porte LAN hanno circuiti SELV, le porte PSTN hanno cir-

cuiti TNV. Alcune porte LAN e PSTN fanno uso di connettori RJ-45. Fare attenzio-

ne quando si collegano cavi.

snom Vision Quick Start Guide

Conformità

Il dispositivo è certiﬁcato CE e FCC e risponde agli standard europei e

statunitensi di salute, sicurezza ed ambientali.

Eventuali modiﬁche, cambiamenti e l’apertura non autorizzata del dispositivo

invalidano la garanzia e potrebbero eventualmente annullare le certiﬁcazioni

CE e FC. In caso di malfunzionamento contattare il personale di assistenza

autorizzato, il rivenditore, o snom.

• Sicurezza: IEC 60950-1:2005

• Certiﬁcazioni: FCC Class B, Marchio CE

• Consumo di potenza: 2,5 - 7 Watt (senza unità perifericas)

• Potenza: 5 V DC o PoE (Power over Ethernet`) IEEE 802.3af, Class 2

• 1 x LAN: RJ45 (Ethernet) 1 x 10/100 Mbps

• Connettori USB: 2 x tipo A, 1 x tipo B

Smaltimento del dispositivo

Questo dispositivo è soggetto alla Direttiva Europea 2002/96/EC e non

può essere smaltito con i riﬁuti domestici.

Se non sapete come smaltire l’apparecchio una volta inutilizzabile, contatta-

te il comune, la nettezza urbana locale, o il vostro rivenditore.

Pulizia

Utilizzare un panno antistatico. Evitare acqua e altri liquidi o detergenti solidi che potreb-

bero danneggiare la superﬁcie o l’elettronica interna.

snom Vision Quick Start Guide

Iniziallizzazione e registrazione

L‘inizializzazione e la registrazione avviene normalmente tramite DHCP.

Se la tua rete non supporta il DHCP, vedi pagina 25.

Impostazioni

Aprire il browser web del vostro PC e digitare l'indirizzo IP di snom Vision nella barra degli

indirizzi (p.es. http://10.10.10.115.). Premere Invio per apprire l'interfaccia Web di snom

Vision. Effettuare le impostazioni necessarie. Premere su per salvare e spostare il

cursore al campo successivo.

Image: Clicca sull'immagine per aprire la ﬁnestra

per caricare o eliminare un immagine

Number: Inserisci qui il numero di interno

desiderato o un recapito telefonico esterno

Name: Immettere il nome o il numero da visualizzare

sul display

Phone IP: L'indirizzo IP del telefono a cui si vuole

collegare il modulo di espansione

User & Password: Nome utente e password per

l'interfaccia web del telefono. Lasciare vuoto se non

sono state impostate

Identity for outgoing calls: Identità per la

chiamata in uscita. Se non si immette un'identità,

l'apparecchio impiega l'identità corrente del telefono.

Select image to upload: Inserisci l'URL

dell'immagine da caricare e cliccare su

"Upload"

Delete Image: Clicca su "Delete" per

eliminare l'immagine corrente

snom Vision Quick Start Guide

Esta es la Guía de Inicio Rápido para la instalación, conﬁguración y uso del

snom Vision. Para más información, consulte el manual en nuestra página

web

http://wiki.snom.com/Accessories/snom_Vision

Propriedad intelectual, Marcas registradas, GPL, Exenciόn de

responsabilidad

snom, los nombres de los productos snom, y los logos de snom son marcas comerciales

propiedad de snom technology AG. Los demás nombres de producto y empresas son

propiedad de sus respectivos propietarios.

snom technology AG se reserva el derecho de revisar y modiﬁcar este documento en

cualquier momento, sin obligación de notiﬁcar estas revisiones o modiﬁcaciones por ade-

lantado o con posterioridad a sz realización.

Los textos, imagines e ilustraciones, y su presentación en este documento, están sujetos

a la protección de copyright y otros derechos legales internacionales. Su uso, reproduc-

ción y transmisión a terceros sin permiso expreso por escrito puede dar lugar al inicio de

procedimientos legales en los tribunales penales y civiles.

Aunque se han tomado todas las precauciones posibles en la compilación y presenta-

ción de la información de este documento, los datos en los que se basa pueden haber

cambiado con el tiempo. snom, por lo tanto, renuncia a cualquier garantía y responsabili-

dad respecto a la precisión, exhaustividad y vigencia actual de la información publicada,

excepto en el caso de intencionalidad o negligencia grave por parte de snom cuando se

deriven responsabilidades de acuerdo con las disposiciones legales vinculantes.

Nuestro ﬁrmware incluye código fuente que puede ser usado y modiﬁcado por cualquier

persona bajo la licencia pública GNU (GPL) (vease la página <?>), siempre que, a su

vez, lo ponga a dis-posición de cualquier otra persona que tenga el mismo acuerdo de

licencia. Acceda a http://www.snom.com/de/support/download/gpl-quellcode/ para obte-

ner la licencia GPL original y el código fuente de los componentes con licencia en virtud

de la GPL y utilizados en productos snom.

snom Vision Quick Start Guide

Información importante

Lea las instrucciones sobre seguridad y reciclaje del teléfono, y sobre cómo conﬁgurar y

utilizar el teléfono antes de usarlo, y ofrézcalas igualmente a otros usuarios para que las

lean o se informen de su contenido. Conserve este manual y no entregue el teléfono a

terceros sin el mismo.

Seguridad

Siga las instrucciones de este manual y cualquier otra documentación aplicable del dispo-

sitivo.

• Si la alimentación del teléfono no se realiza mediante/por Ethernet, use exclusiva-

mente el adaptador de alimentación entregado con el teléfono o uno recomendado

de forma expresa par snom. Otros adaptadores pueden dañar o incluso destruir el

teléfono, afectar a su funcionamiento o provocar ruidos.

• Evite poner los cables de modo que otras personas puedan tropezar con el mismo. No

coloque los cables de forma que pueda verse sometido a presiones mecánicas, ya que

eso podría dañar los cables. Si el cable de alimentación o el enchufe están dañados,

desconecte el teléfono y contacte con personal de servicio cualiﬁcado.

• Este dispositivo es solamente para uso en interiores.

• No instale el teléfono en lugares con humedad elevada (por ejemplo, en baños, lavade-

ros, o sótanos húmedos). No sumerja el teléfono en agua ni derrame o vierta líquidos

de ningún tipo sobre el teléfono.

• No instale el teléfono cerca de lugares con riesgo de explosión (talleres de pintura, por

ejemplo). No use el teléfono si huele a gas o a otros vapores que puedan ser explosi-

vos.

• No use el teléfono durante una tormenta; los rayos que impacten en la red eléctrica

pueden descargas eléctricas.

Cumplimiento de los requisitos SELV (Tensión Extra-Baja de Seguri-

dad)

Las condiciones de seguridad de las conexiones de entrada/salida cumplen con los requi-

sitos SELV.

snom Vision Quick Start Guide

Atención: Para evitar descargas eléctricas, no conecte circuitos de seguridad

de tensión extra-baja (SELV) a circuitos de tensión de red telefónica (TNV). Los

puertos LAN contienen circuitos SELV, los puertos contienen circuitos TNV. Algu-

nos puertos LAN y PSTN utilizan conectores RJ-45 (8P8C). Tome precausiones

cuando conecte los cables..

Cumplimiento con la normativa

Este teléfono tiene certiﬁcación CE y FCC, y cumple con los estándares de

salud, seguridad y medioambientales europeos y de Estados Unidos.

La apertura, cambio, o modiﬁcación no autorizadas del teléfono provocarán

que la garantía se cancele, y también pueden resultar en la cancelación de

las certiﬁcaciones CE y FCC. En caso de avería, contacte con personal de

servicio autorizado, su vendedor, o snom.

• Seguridad: IEC 60950-1:2005

• Certiﬁcados: FCC Class B, Indicación CE

• Consumo eléctrico: 2,5-7 W (sin unidades periféricas)

• 1 x LAN: RJ45 (Ethernet) 1 x 10/100 Mbps

• Alimentación: 5 V DC o PoE (Power over Ethernet) IEEE 802.3af, Clase 2

• Conectores USB: 2 x tipo A, 1 x tipo B

Eliminación

Este teléfono está sujeto a la Directriz Europea 2002/96/EC, y no se pue-

de desechar con los residuos domésticos generales.

Si no sabe dónde reciclar el dispositivo cuando deje de funcionar, contacte

con las autoridades municipales, con su proveedor de gestión de residuos

local o con su vendedor.

Limpieza

Use una paño antiestático. No utilice agua ni productos de limpieza, ya que podrían dañar

la superﬁcie o los componentes electrónicos del aparato.

snom Vision Quick Start Guide

Inizialización y registro

Normalmente la inicialización es totalmente automática y se realiza a través del protocolo

DHCP.

Si su red no admite DHCP, consulte la página 25.

Conﬁguración

Abra el navegador de su PC. Teclee la dirección IP del snom Vision en la barra de direc-

ciones (por ejemplo: http://10.10.10.115) y pulse Enter para abrir la interfaz web del snom

Vision. Introduzca los datos necesarios. Pulse para guardar y pasar al siguiente

campo.

Image: Haga clic en la imagen para abrir la ventana

para cargar un archivo de imagen o borrar la imagen

actual

Number: Introduzca el número de extensión/ teléfo-

no supletorio o de una línea externa

Name: Introduzca el nombre o número que se debe

mostrar en la pantalla

Phone IP: Dirección IP del teléfono al que se

conecta el módulo de ampliación

User & Password: El nombre de usuario y la con-

traseña para abrir el navegador web del teléfono en

caso de que sea necesario

Identity for outgoing calls: Identidad para las

llamadas salientes. Si no se indica ninguna identidad,

se utilizará la identidad de salida del teléfono.

Select image to upload: Introduzca la URL

del ﬁchero de imagen y haga clic en "Upload"

Delete Image: Haga clic en "Delete" para

eliminar la imagen actual

25 App

APPENDIX 1

ENGLISH: Initializing and registering without DHCP

If your network does not support DHCP, you must obtain a static IP address, the netmask,

and the IP gateway from your Internet service provider or your network administrator and

enter them manually on the touchscreen.

• Delete character to the left of the cursor: <

• Delete all entries and start over: Press the  key

Enter IP address, netmask, and IP gateway. Press  when ﬁnished.

DEUTSCH: Initialisierung und Registrierung ohne DHCP

Falls Ihr Netzwork DHCP nicht unterstützt, lassen Sie sich von Ihrem Netzwerkadminis-

trator die IP-Addresse, die Netzmaske, und den IP-Gateway geben und tragen Sie sie

manuell auf dem Touchscreen ein.

• Zeichen links vom Cursor löschen: <

• Alle Eingaben löschen und neu beginnen: Drücken Sie auf die Taste 

Geben Sie IP-Addresse, Netzmaske und IP-Gateway ein. Drücken Sie auf . wenn Sie

alle Eingaben beendet haben.

.192.168.002.034.

.010.010.010.151.

192.168.2.34  192.168.002.034

10.10.10.151.  010.010.010.151

Static IP configuration

IP: . . .

Netmask:

Gateway:



App

APPENDIX 1

FRANÇAIS: Initialisation et enrégistration sans DHCP

Si votre réseau ne supporte pas le protocole DHCP, vous devez également saisir l‘adresse

IP, le sous-réseau et la passerelle IP manuellement. Demandez-les de votre administrateur

réseau et saisissez-les à l'ecran tactile.

• Supprimer le caractère à la gauche du curseur: <

• Supprimer tous les caractères et commencer de nouveau: Appuyez sur la touche 

Saisissez l'adresse IP, le sous-réseau et la passerelle IP. Appuyez sur la touche .

ITALIANO: Iniziallizzazione e registrazione senza DHCP

Se la tua rete non supporta il DHCP, è necessario richiedere un indirizzo IP statico, la

sottorete, il gateway predeﬁnito all’amministratore di sistema o il tuo provider internet ed

immettere tali dati manualmente tramite il display sensibile al tatto.

• Per cancellare il carattere a sinistra del cursore premi : <

• Per annullare e reinserire i dati premi il tasto 

Digitare l‘indirizzo IP, la sottorete ed il gateway IP. Al termine premere il tasto .

ESPAÑOL: Inizialización y registro sin DHCP

Si su red no admite DHCP, deberá obtener una dirección IP estática, la máscara de red

y la IP de la puerta de enlace de su proveedor de internet o su administrador de red e

introducirlos manualmente en la pantalla táctil.

• Eliminar el carácter a la izquierda del cursor: <

• Eliminar todos los caracteres y empezar de nuovo: Pulse la tecla 

Teclee la dirección IP, la máscara de red y el IP de la puerta de enlace. Cuando ﬁnalice,

pulse la tecla .

27 App

APPENDIX 2

Das Produkt enthält Software, die unter der GNU General Public License, Version 2, frei genutzt werden darf.

This Product contains Software applicable to GNU General Public License, Version 2 which can be used

freely.

II.

Im Verhältnis zu den Lizenzgebern der Software gilt der folgende Haftungsausschluss:

Towards the licensor of this Software the following liability is disclaimed:

This program is distributed in the hope that it will be useful, but WITHOUT ANY WAR-

RANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE. See the GNU General Public License for more details.

III.

Der Lizenztext der GPL lautet wie folgt:

The GNU General Public License is as follows:

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

59 Temple Place, Suite 330, Boston, MA 02111-1307, USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not

allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast,

the GNU General Public License is intended to guarantee your freedom to share and change free software

- to make sure the software is free for all its users. This General Public License applies to most of the Free

Software Foundation‘s software and to any other program whose authors commit to using it. (Some other Free

Software Foundation software is covered by the GNU Library General Public License instead.) You can apply

it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are

App

APPENDIX 2

designed to make sure that you have the freedom to distribute copies of free software (and charge for this

service if you wish), that you receive source code or can get it if you want it, that you can change the software

or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you

to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of

the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients

all the rights that you have. You must make sure that they, too, receive or can get the source code. And you

must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives

you legal permission to copy, distribute and/or modify the software.

Also, for each author‘s protection and ours, we want to make certain that everyone understands that there is

no warranty for this free software. If the software is modiﬁed by someone else and passed on, we want its

recipients to know that what they have is not the original, so that any problems introduced by others will not

reﬂect on the original authors‘ reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that re-

distributors of a free program will individually obtain patent licenses, in effect making the program proprietary.

To prevent this, we have made it clear that any patent must be licensed for everyone‘s free use or not licensed

at all.

The precise terms and conditions for copying, distribution and modiﬁcation follow.

GNU GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copy-

right holder saying it may be distributed under the terms of this General Public License. The „Program“,

below, refers to any such program or work, and a „work based on the Program“ means either the Pro-

gram or any derivative work under copyright law: that is to say, a work containing the Program or a por-

tion of it, either verbatim or with modiﬁcations and/or translated into another language. (Hereinafter,

translation is included without limitation in the term „modiﬁcation“.) Each licensee is addressed as „you“.

Activities other than copying, distribution and modiﬁcation are not covered by this License; they are outside its

scope. The act of running the Program is not restricted, and the output from the Program is covered only if its

contents constitute a work based on the Program (independent of having been made by running the Program).

Whether that is true depends on what the Program does.

29 App

APPENDIX 2

1. You may copy and distribute verbatim copies of the Program‘s source code as you receive it, in any

medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright

notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of

any warranty; and give any other recipients of the Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty

protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the

Program, and copy and distribute such modiﬁcations or work under the terms of Section 1 above, provided

that you also meet all of these conditions:

a) You must cause the modiﬁed ﬁles to carry prominent notices stating that you changed the ﬁles and

the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived

from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under

the terms of this License.

c) If the modiﬁed program normally reads commands interactively when run, you must cause it, when

started running for such interactive use in the most ordinary way, to print or display an announcement

including an appropriate copyright notice and a notice that there is no warranty (or else, saying that

you provide a warranty) and that users may redistribute the program under these conditions, and

telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but

does not normally print such an announcement, your work based on the Program is not required to

print an announcement.)

These requirements apply to the modiﬁed work as a whole. If identiﬁable sections of that work are not de-

rived from the Program, and can be reasonably considered independent and separate works in themsel-

ves, then this License, and its terms, do not apply to those sections when you distribute them as sepa-

rate works. But when you distribute the same sections as part of a whole which is a work based on the

Program, the distribution of the whole must be on the terms of this License, whose permissions for

other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you;

rather, the intent is to exercise the right to control the distribution of derivative or collective works based on

the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work

based on the Program) on a volume of a storage or distribution medium does not bring the other work under

the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or

executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

App

APPENDIX 2

a) Accompany it with the complete corresponding machine-readable source code, which must be

distributed under the terms of Sections 1 and 2 above on a medium customarily used for software

interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no

more than your cost of physically performing source distribution, a complete machine-readable copy

of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a

medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source

code. (This alternative is allowed only for noncommercial distribution and only if you received the

program in object code or executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modiﬁcations to it. For an exe-

cutable work, complete source code means all the source code for all modules it contains, plus any associated

interface deﬁnition ﬁles, plus the scripts used to control compilation and installation of the executable. Howe-

ver, as a special exception, the source code distributed need not include anything that is normally distributed

(in either source or binary form) with the major components (compiler, kernel, and so on) of the operating

system on which the executable runs, unless that component itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then

offering equivalent access to copy the source code from the same place counts as distribution of the source

code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this

License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will auto-

matically terminate your rights under this License. However, parties who have received copies, or rights, from

you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you

permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if

you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the

Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying,

distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically

receives a license from the original licensor to copy, distribute or modify the Program subject to these terms

and conditions. You may not impose any further restrictions on the recipients‘ exercise of the rights granted

herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not

limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that

31 App

APPENDIX 2

contradict the conditions of this License, they do not excuse you from the conditions of this License. If you

cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent

obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license

would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly

through you, then the only way you could satisfy both it and this License would be to refrain entirely from

distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance

of the section is intended to apply and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims

or to contest validity of any such claims; this section has the sole purpose of protecting the integri-

ty of the free software distribution system, which is implemented by public license practices. Many

people have made generous contributions to the wide range of software distributed through that sys-

tem in reliance on consistent application of that system; it is up to the author/donor to decide if he or

she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this

License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copy-

righted interfaces, the original copyright holder who places the Program under this License may add an explicit

geographical distribution limitation excluding those countries, so that distribution is permitted only in or among

countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of

this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License

from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to

address new problems or concerns.

Each version is given a distinguishing version number. If the Program speciﬁes a version number of this

License which applies to it and „any later version“, you have the option of following the terms and conditions

either of that version or of any later version published by the Free Software Foundation. If the Program

does not specify a version number of this License, you may choose any version ever published by the Free

Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are

different, write to the author to ask for permission. For software which is copyrighted by the Free Software

Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will

be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting

the sharing and reuse of software generally.

App

APPENDIX 2

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE

PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STA-

TED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM

„AS IS“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTI-

CULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM

IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NE-

CESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY

PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY

TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING REN-

DERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE

PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PAR-

TY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way

to achieve this is to make it free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source ﬁle

to most effectively convey the exclusion of warranty; and each ﬁle should have at least the „copyright“ line and

a pointer to where the full notice is found.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General

Public License as published by the Free Software Foundation; either version 2 of the License, or (at your

option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without

even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See

33 App

APPENDIX 2

the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write

to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

IV.

Den vollständigen korrespondierenden Sourcecode der Software schickt Ihnen die snom technology AG auf

Nachfrage gerne auf einem üblichen Datenträger gegen Erstattung der Herstellungskosten in Höhe von EUR

5,- zu.

Der vollständige korrespondierende Sourcecode kann auch über unsere Website unter http://www.snom.

com/gpl_.html?&L=0 herunter geladen werden.

If requested by you, the complete corresponding source code of the Software can be sent by snom technology

AG on a standard data storage medium against the reimbursement of the manufacturing costs of EUR 5.- per unit.

The complete corresponding source code of the Software can also be downloaded from our web site

http://www.snom.com/gpl_.html?&L=0.

Weitere Informationen ﬁnden Sie auch unter http://www.snom.com.

For further information see http://www.snom.com.

Quick Start Guide

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

v1.02

snom technology AG

Charlottenstr. 68-71

10117 Berlin, Deutschland

Tel. +49 30 39 83 3-0

Fax +49 30 39 83 31 11

[email protected]; s[email protected]

snom technology, Inc.

100 Cummings Center, Suite 125-G

Beverly, MA 01915, USA

Tel. 978-998-7882

Fax 978-998-7883

infoU[email protected]

snom France SARL

6 Parc des fontenelles

78870 Bailly, France

Tel. +33 1 80 87 62 87

Fax +33 1 80 87 62 88

[email protected]; s[email protected]

snom technology SRL

Via A. Lusardi 10

20122 Milano, Italia

Tel +39 02 00611212

Fax +39 02 93661864

[email protected]; s[email protected]

Your specialist retailer - Ihr Fachhändler -

Votre distributeur - Su distribuidor - Il tuo rivenditore:

Snom Vision Guía de inicio rápido

Marca: Snom

Modelo: Vision

Tipo: Guía de inicio rápido

Descargar PDF

informe

En otros idiomas

français: Snom Vision Guide de démarrage rapide
italiano: Snom Vision Guida Rapida
English: Snom Vision Quick start guide
Deutsch: Snom Vision Schnellstartanleitung

Snom Vision Guía de inicio rápido

Snom Vision Guía de inicio rápido

En otros idiomas

Documentos relacionados