Panasonic KXHN6003 Instrucciones de operación

Marca: Panasonic

Modelo: KXHN6003

Tipo: Instrucciones de operación

Este manual también es adecuado para

El Panasonic KXHN6003 es un dispositivo que permite controlar y automatizar aparatos eléctricos a través de una conexión inalámbrica, utilizando una aplicación móvil. Con este dispositivo, puedes encender y apagar los aparatos conectados desde cualquier lugar con acceso a internet, programar horarios de encendido y apagado, y monitorear el consumo de energía. También puedes crear escenas personalizadas para controlar múltiples dispositivos con un solo comando de voz o con un solo toque en la aplicación.

Installation Guide

Home Network System

Smart Plug

Model No. KX-HNA101

Thank you for purchasing a Panasonic product.

This document explains how to install the smart plug properly.

For details about how to use the system, refer to the User’s Guide

(page 9).

Please read this document before using the unit and save it for future

reference.

For assistance, visit our Web site: www.panasonic.com/support

for customers in the U.S.A. or Puerto Rico.

Please register your product: www.panasonic.com/prodreg

Printed in China

Important Information
About this system ......................3
For your safety ...........................3
Important safety instructions ......4
For best performance ................4
Other information .......................5
Setup
Part names and functions ..........6
LED indicator .............................6
Setup overview ..........................6
Connections ...............................7
Registering the smart plug .........8
Wireless communication
range .........................................8
Appendix
Testing the smart plug ...............9
Features available when using the
[Home Network] app ..................9
Accessing the User’s Guide ......9
Specifications ..........................10
Trademarks .............................10
FCC and other information ......11
Customer services ...................13
Warranty (For United States and
Puerto Rico) .............................14
2
Table of Contents

About this system

R This system is an auxiliary system; it

is not designed to provide complete

protection from property loss.

Panasonic will not be held

responsible in the event that

property loss occurs while this

system is in operation.

R This system’s wireless features can

be affected by various conditions

that could interfere with wireless

communications, and as such,

functionality in any or all situations

cannot be guaranteed. Panasonic

will not be held responsible for injury

or damage to property that occurs in

the event of wireless communication

error or failure.

For your safety

To prevent severe injury and loss of life/

property, read this section carefully

before using the product to ensure

proper and safe operation of your

product.

WARNING

Power connection

R Use only the power source marked

on the product.

R Do not overload power outlets. This

can result in the risk of fire or electric

shock.

R Completely insert the product into

the power outlet. Failure to do so

may cause electric shock and/or

excessive heat resulting in a fire.

R Regularly remove any dust, etc.

from the product by pulling it from

the power outlet, then wiping with a

dry cloth. Accumulated dust may

cause an insulation defect from

moisture, etc. resulting in a fire.

R Unplug the product from power

outlets if it emits smoke, an

abnormal smell, or makes an

unusual noise. These conditions can

cause fire or electric shock. Confirm

that smoke has stopped emitting

and contact us at

www.panasonic.com/contactinfo

R Unplug from power outlets and

never touch the inside of the product

if its casing has been broken open.

Danger of electric shock exists.

R Never touch the plug with wet

hands. Danger of electric shock

exists.

R Do not connect non-specified

devices.

R Before connecting an electric device

to this product, make sure the

electric device meets the

specifications described on

page 10. Using unspecified

devices may cause fire or smoke.

Installation

R Install this product in accordance

with the provided instructions.

R To prevent the risk of fire or

electrical shock, do not expose the

product to rain or any type of

moisture.

R Do not place or use this product

near automatically controlled

devices such as automatic doors

and fire alarms. Radio waves

emitted from this product may cause

such devices to malfunction

resulting in an accident.

R Panasonic will not be held

responsible for damage or injury

For assistance, please visit www.panasonic.com/support

Important Information

caused by improper connection,

installation, or usage.

Operating safeguards

R Unplug the product from power

outlets before cleaning. Do not use

liquid or aerosol cleaners.

R Do not disassemble the product.

R Never put metal objects inside the

product. If metal objects enter the

product, turn off the circuit breaker

and contact an authorized service

center.

R Use this product to supply power

only to devices which can be

operated safely remotely. Do not

connect the following.

– Cooking appliances, irons, or

other devices that generate a

large amount of heat. There is a

risk of fire, burns, and injury.

– Power tools, electric machinery,

or other devices that could cause

injury and therefore must be used

under direct, careful observation.

– Heating or cooling devices, or any

type of device which could cause

health risks, particular to the

elderly or to small children, and

therefore should be used only

when usage conditions can be

confirmed.

– Medical devices. This product is

not intended to be used when

providing medical care.

Medical

R Consult the manufacturer of any

personal medical devices, such as

pacemakers or hearing aids, to

determine if they are adequately

shielded from external RF (radio

frequency) energy. DECT features

operate between 1.92 GHz and

1.93 GHz with a peak transmission

power of 115 mW.

R Do not use the product in health

care facilities if any regulations

posted in the area instruct you not to

do so. Hospitals or health care

facilities may be using equipment

that could be sensitive to external

RF energy.

CAUTION

Installation and location

R Never install the product during a

lightning storm.

Important safety

instructions

When using your product, basic safety

precautions should always be followed

to reduce the risk of fire, electric shock,

and injury to persons, including the

following:

1. Do not use this product near water

for example, near a bathtub,

washbowl, kitchen sink, or laundry

tub, in a wet basement or near a

swimming pool.

SAVE THESE INSTRUCTIONS

For best performance

Hub location/avoiding noise

The hub and other compatible

Panasonic devices use radio waves to

communicate with each other.

For assistance, please visit www.panasonic.com/support

Important Information

R For maximum coverage and

noise-free communications, place

your hub:

– at a convenient, high, and central

location with no obstructions

between the product and hub in

an indoor environment.

– away from electronic appliances

such as TVs, radios, personal

computers, wireless devices, or

other phones.

– facing away from radio frequency

transmitters, such as external

antennas of mobile phone cell

stations. (Avoid putting the hub

on a bay window or near a

window.)

R If the reception for a hub location is

not satisfactory, move the hub to

another location for better reception.

Environment

R Keep the product away from

electrical noise generating devices,

such as fluorescent lamps and

motors.

R The product should be kept free

from excessive smoke, dust, high

temperature, and vibration.

R The product should not be exposed

to direct sunlight.

R Do not place heavy objects on top of

the product.

R When you leave the product unused

for a long period of time, unplug the

product from the power outlet.

R The product should be kept away

from heat sources such as heaters,

kitchen stoves, etc. It should not be

placed in rooms where the

temperature is less than 0 °C (32 °F)

or greater than 40 °C (104 °F).

Damp basements should also be

avoided.

R Operating the product near electrical

appliances may cause interference.

Move away from the electrical

appliances.

Other information

Routine care

R Wipe the outer surface of the

product with a soft moist cloth.

R Do not use benzine, thinner, or any

abrasive powder.

Notice:

For assistance, please visit www.panasonic.com/support

Important Information

Part names and

functions

Power plug

M N

Used when registering the smart

plug to the hub.

Power outlet

M N (on/off)

LED indicator

Turns the connected device on

and off. Also serves as the LED

indicator.

LED indicator

You can use the LED indicator to

confirm the smart plug’s status.

Indicator Status

Off No power, smart

plug is off, or LED

indicator is turned

off

Green, lit

Smart plug is on

Green,

blinking

Registration mode

Indicator Status

Red, blinking Smart plug is out of

range of the hub

Red, blinking

quickly

Connected electric

device is drawing

too much current or

wattage

*1 You can configure the smart plug

so that its LED indicator does not

light during normal operation. For

more information, refer to the

User’s Guide (page 9).

*2 In this case, the smart plug will

turn off automatically. To turn the

smart plug on again, disconnect it

from the power outlet, disconnect

the connected electric device, and

then connect the smart plug to the

power outlet.

Setup overview

1 Initial setup

Make sure you can access the

system using your mobile device.

For details, refer to the System

Setup Guide included with your

hub.

2 Connection

Connect the smart plug to the

power outlet and connect the

desired electric device to the smart

plug.

3 Registration

Required only if the smart plug

was purchased separately (i.e.,

not as part of a bundle).

4 Confirm the usage area

Read the information in this

document to confirm that the

For assistance, please visit www.panasonic.com/support

Setup

desired usage area is suitable to

proper operation.

Connections

Firmly insert the smart plug (

)

into the power outlet.

Firmly insert the AC plug of the

desired electric device (

) into

the smart plug.

1 2 1 2

Note:

R You can turn the power supplied to

the smart plug’s power outlet on and

off by pressing M

Note about connections

R The smart plug should be connected

to a vertically oriented or

floor-mounted AC outlet. Do not

connect the smart plug to a

ceiling-mounted AC outlet, as the

weight of the smart plug may cause

it to become disconnected.

R If the electric device connected to

the smart plug draws more than

10 A or 1,200 W of power, the smart

plug will turn off automatically.

R In the event of a power failure, the

smart plug may not turn back on

after power is restored. For this

reason, connecting refrigerators or

other devices that require constant

power supply should not be

connected to the smart plug.

R After connecting an electric device

to the smart plug, make sure the

smart plug is firmly connected to the

power outlet.

For assistance, please visit www.panasonic.com/support

Setup

Registering the

smart plug

This procedure is not required for

devices that were included as part of

a bundle.

Before you can use the smart plug, it

must be registered to the hub.

If you purchased devices separately

(i.e., not as part of a bundle), you must

You can register each device by using

the registration buttons or the [Home

Network] app.

Using registration buttons

1 Hub:

Press and hold M OTHER

DEVICEN until the LED indicator

blinks in green.

2 Smart plug:

Press and hold M N until the

LED indicator blinks in green

(page 6).

R When registration is complete,

the hub sounds one long beep.

Note:

R To cancel the registration, press the

registration button on the hub and

on the smart plug.

R If registration fails, the hub sounds

several short beeps.

Using the app

When you register the smart plug by

using the [Home Network] app, you

can assign a name to your devices and

group them by location. For more

information, refer to the User’s Guide

(page 9).

Wireless

communication

range

The wireless communication range of

each device in the system from the hub

is approximately 50 m (160 feet)

indoors and approximately 300 m

(1,000 feet) outdoors. Wireless

communication may be unreliable

when the following obstacles are

located between the hub and other

devices.

R Metal doors or screens

R Walls containing aluminum-sheet

insulation

R Walls made of concrete or

corrugated iron

R Double-pane glass windows

R Multiple walls

R When using each device on

separate floors or in different

buildings

Note:

R The LED indicator blinks in red if it is

out of range of the hub. In this case,

confirm all connections, including

those of the hub.

For assistance, please visit www.panasonic.com/support

Setup

Testing the smart

plug

After you have installed the [Home

Network] app on your mobile device,

you can use your mobile device to turn

the smart plug on and off. For more

information, refer to the User’s Guide

(page 9).

1 From the [Home Network] app

home screen, tap [Plug].

2 Select the [Individual] tab.

3 Tap the desired smart plug icon.

R Confirm that the selected smart

plug turns on and off when you

tap its icon.

Features available

when using the

[Home Network] app

Some of the features that are available

when using the [Home Network] app

are listed below. For more information,

refer to the User’s Guide.

– Remote power on/off

You can turn the electric device on

and off remotely, even when away

from home.

– Sensor integration

You can configure the system to turn

the electric device on when a sensor

is triggered. (Sensor required.)

– Timer on/off

You can configure a timer to turn the

electric device on and off at the

desired times.

– Overcurrent notification

The smart plug can detect the

current supplied to the connected

electric device. If overcurrent is

detected, the smart plug sends a

notification to the [Home Network]

app.

Accessing the User’s

Guide

The User’s Guide is a collection of

online documentation that helps you

get the most out of the [Home

Network] app.

1 iPhone

/iPad

Tap in the app’s home screen.

Android™ devices

Tap or press your mobile

device’s menu button in the app’s

home screen.

2 Tap [User’s Guide].

Note:

R You can also access the User’s

Guide at the web page listed below.

www.panasonic.net/pcc/support/tel/

homenetwork/manual/

For assistance, please visit www.panasonic.com/support

Appendix

Specifications

R Standards

DECT 6.0 (Digital Enhanced

Cordless Telecommunications 6.0)

R Frequency range

DECT: 1.92 GHz – 1.93 GHz

R RF transmission power

DECT: 115 mW (max.)

R Power source

120 V AC, 60 Hz

R Power consumption

Standby: 0.5 W

Maximum: 1.1 W

R Operating conditions

0 °C – 40 °C (32 °F – 104 °F)

20% – 80% relative air humidity (dry)

R Maximum wattage

Approx. 1,200 W

R Maximum current

Approx. 10 A

R Dimensions

Approx. 94 mm ´ 64 mm ´ 35 mm

(3 11/16 inches ´ 2 17/32 inches ´ 1

3/8 inches), excluding the pins

R Mass (weight)

Approx. 140 g (0.31 lb)

Note:

R Design and specifications are

subject to change without notice.

R The illustrations in these instructions

may vary slightly from the actual

product.

Trademarks

R iPhone and iPad are registered

trademarks of Apple Inc.

R Android is a trademark of Google Inc.

For assistance, please visit www.panasonic.com/support

Appendix

FCC and other

information

This device complies with Part 15 of

the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

Privacy of communications may not be

ensured when using this phone.

CAUTION:

Any changes or modifications not

expressly approved by the party

responsible for compliance could void

the user’s authority to operate this

device.

NOTE:

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses, and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause

harmful interference to radio

communications. However, there is no

guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful

interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try to correct the

interference by one or more of the

following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an

outlet on a circuit different from that

to which the receiver is connected.

– Consult the dealer or an

experienced radio/TV technician for

help.

Some cordless telephones operate at

frequencies that may cause

interference to nearby TVs and VCRs.

To minimize or prevent such

interference, the base of the cordless

telephone should not be placed near or

on top of a TV or VCR. If interference is

experienced, move the cordless

telephone further away from the TV or

VCR. This will often reduce or eliminate

interference.

FCC RF Exposure Warning:

R This product complies with FCC

radiation exposure limits set forth for

an uncontrolled environment.

R To comply with FCC RF exposure

requirements, the device must be

installed and operated 20 cm

(8 inches) or more between the

product and all person’s body.

R This product may not be collocated

or operated in conjunction with any

other antenna or transmitter.

R For body-worn operation, the

handset must be used only with a

non-metallic accessory. Use of other

accessories may not ensure

compliance with FCC RF exposure

requirements.

For assistance, please visit www.panasonic.com/support

Appendix

Notice:

R FCC ID can be found on the rear of

the unit.

For assistance, please visit www.panasonic.com/support

Appendix

Customer services

Customer Services Directory (United States and

Puerto Rico)

www.panasonic.com/support

or, contact us via the web at:

www.panasonic.com/contactinfo

For hearing or speech impaired TTY users, TTY: 1-877-833-8855

For hearing or speech impaired TTY users, TTY: 1-866-605-1277

www.pstc.panasonic.com

or, send your request by E-mail to:

[email protected]

Accessory Purchases (United States and

Puerto Rico)

Obtain Product Information and Operating Assistance; locate your nearest

Dealer or Service Center; purchase Parts and Accessories; or make Customer

Service and Literature requests by visiting our Web Site at:

You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),

Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.

Purchase Parts, Accessories and Owner’s Manual online for all

Panasonic Products by visiting our Web Site at:

You may also contact us directly at:1-800-237-9080 (Fax Only)

(Monday - Friday 9 am to 9 pm, EST.)

Panasonic National Parts Center

20421 84th Avenue S., Kent, WA 98032

(We accept Visa, MasterCard, Discover Card, American Express.)

For assistance, please visit www.panasonic.com/support

Appendix

Warranty (For United States and Puerto Rico)

Limited Warranty Coverage

Labor

One (1) Year

Parts

One (1) Year

Online Repair Request

To submit a new repair request and for quick repair status visit our Web Site at

www.panasonic.com/repair

PROOF OF PURCHASE.

Panasonic Home Network System Products

Limited Warranty

Mail-In Service--Online

If your product does not work properly because of a defect in materials or workmanship,

Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length

of the period indicated on the chart below, which starts with the date of original purchase

(“Limited Warranty period”), at its option either (a) repair your product with new or

refurbished parts, or (b) replace it with a new or a refurbished equivalent value product, or

the warrantor.

During the “Labor” Limited Warranty period there will be no charge for labor. During the

“Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your

product prepaid during the Limited Warranty period. This Limited Warranty excludes both

parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited

Warranty only applies to products purchased and serviced in the United States or Puerto

Rico. This Limited Warranty is extended only to the original purchaser and only covers

products purchased as new.

Home Network System Products

microSD card (Included model only) 90 days N/A

When shipping the unit carefully pack in a padded shipping carton, include all

accessories, and send it prepaid. Include a letter detailing the complaint, a return

address and provide a day time phone number where you can be reached. P.O. Boxes

are not acceptable. Keep the tracking number for your records. A copy of valid

registered receipt is required under the 1 year parts and labor Limited Warranty.

For Limited Warranty service for headsets if a headset is included with this

product please follow instructions above.

IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE

PURCHASER WILL BE REQUIRED TO FURNISH A SALES

RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,

AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE

CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH

For assistance, please visit www.panasonic.com/support

Appendix

Limited Warranty Limits And Exclusions

This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,

and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty

ALSO DOES NOT COVER damages which occurred in shipment, or failures which are

caused by products not supplied by the warrantor, or failures which result from accidents,

misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty

installation, set-up adjustments, misadjustment of consumer controls, improper maintenance,

power line surge, lightning damage, modification, introduction of sand, humidity or liquids,

commercial use such as hotel, office, restaurant, or other business or rental use of the

product, or service by anyone other than a Factory Service Center or other Authorized

Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED

WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR

ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this

excludes damages for lost time, lost calls or messages, cost of having someone remove or

re-install an installed unit if applicable, travel to and from the servicer. The items listed are not

exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,

INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD

OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages,

or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.

This Limited Warranty gives you specific legal rights and you may also have other rights

which vary from state to state. If a problem with this product develops during or after the

Limited Warranty period, you may contact your dealer or Service Center. If the problem is not

handled to your satisfaction, then write to the warrantor's Consumer Affairs Department at the

addresses listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE

YOUR RESPONSIBILITY.

When you ship the product

ȷCarefully pack your unit, preferably in the original carton.

ȷAttach a letter, detailing the symptom.

ȷSend the unit to Panasonic Exchange Center, prepaid and adequately insured.

ȷDo not send your unit to Panasonic Corporation of North America listed on the back

cover or to executive or regional sales offices. These locations do not repair consumer

products.

For assistance, please visit www.panasonic.com/support

Appendix

A Disconnect and reconnect the smart plug.

IMPORTANT!

If your product is not working properly. . .

Visit our Web site: www.panasonic.com/support

LFAQ and troubleshooting hints are available.

Use the Home Network app to access the User’s Guide

and refer to the Troubleshooting section.

For your future reference

We recommend keeping a record of the following information to assist

with any repair under warranty.

Serial No. Date of purchase

(found on the rear of the unit)

Name and address of dealer

Attach your purchase receipt here.

Two Riverfront Plaza, Newark, NJ 07102-5490

Guía de instalación

Sistema de red doméstico

Enchufe inteligente

Modelo n° KX-HNA101

Gracias por adquirir un producto Panasonic.

Este documento explica cómo instalar el enchufe inteligente de forma correcta.

Para obtener detalles sobre cómo usar el sistema, consulte la Guía del usua-

rio (página 6).

Lea este documento antes de usar la unidad, y guárdelo para consultarlo en el

futuro.

Para obtener ayuda, visite nuestro sitio web: www.panasonic.com/support

para clientes en los EE. UU. o Puerto Rico (solo en inglés).

Por favor, registre su producto: www.panasonic.com/prodreg

PNQX6701ZA CC0814WK0 (E)

Configuración
Nombres de los componentes y
funciones .........................................3
Led indicador ...................................3
Resumen de configuración ..............3
Conexiones ......................................4
Cómo registrar el enchufe
inteligente ........................................5
Alcance de la comunicación
inalámbrica ......................................5
Apéndice
Cómo probar el enchufe
inteligente ........................................6
Acceso a la Guía del usuario ...........6
2
Tabla de Contenido

Nombres de los

componentes y

funciones

Enchufe de alimentación

M N

Se usa para registrar el enchufe

inteligente al hub.

Toma de corriente

M N (encendido/apagado)

Led indicador

Enciende o apaga el dispositivo

conectado. También sirve como el Led

indicador.

Led indicador

Puede usar el Led indicador para confirmar

el estado del enchufe inteligente.

Indicador Estado

Apagado Sin energía, el enchu-

fe inteligente está apa-

gado o el Led indica-

dor está apagado

Verde, encendi-

El enchufe inteligente

está encendido

Indicador Estado

Verde, parpa-

deante

Modo de registro

Rojo, parpa-

deante

El enchufe inteligente

está fuera de alcance

del hub

Rojo, parpadeo

rápido

El dispositivo electróni-

co conectado está re-

cibiendo demasiada

corriente o voltaje

*1 Puede configurar el enchufe

inteligente de forma tal que el Led

indicador no se encienda durante el

funcionamiento normal. Para obtener

más información, consulte la Guía del

usuario (página 6).

*2 En este caso, el enchufe inteligente se

apagará de forma automática. Para

encender de nuevo el enchufe

inteligente, desconéctelo de la toma

de corriente, desconecte el dispositivo

eléctrico, y luego conecte el enchufe

inteligente a la toma de corriente.

Resumen de

configuración

1 Configuración inicial

Asegúrese de poder acceder al

sistema mediante su dispositivo móvil.

Para obtener más detalles, consulte la

Guía de configuración del sistema que

viene con su hub.

2 Conexión

Conecte el enchufe inteligente a la

toma de corriente y conecte el

dispositivo deseado al enchufe

inteligente.

Para obtener ayuda, visite www.panasonic.com/support

Configuración

3 Registro

Solo se requiere si se compró el

enchufe inteligente por separado (es

decir, no como parte de un paquete).

4 Confirmación del área de uso

Lea la información de este documento

para confirmar que el área de uso

deseada sea la adecuada para el

correcto funcionamiento.

Conexiones

Inserte por completo el enchufe

inteligente (

) en la toma de

corriente.

Inserte por completo el enchufe de

corriente del dispositivo deseado (

)

en el enchufe inteligente.

1 2 1 2

Nota:

R Puede activar y desactivar la potencia

suministrada a la toma de corriente del

enchufe inteligente presionando M N.

Nota acerca de las conexiones de

alimentación

R El enchufe inteligente debe estar

conectado a un enchufe de corriente

orientado verticalmente o en una toma

de corriente alterna colocada en el piso.

No conecte el enchufe inteligente de

corriente alterna a una toma de corriente

montada en el techo, ya que el peso del

enchufe inteligente puede hacer que se

desconecte.

R Si el dispositivo eléctrico conectado al

enchufe inteligente consume más de

10 A o 1,200 W de energía, el enchufe

inteligente se apagará automáticamente.

R En caso de que fallara el suministro

eléctrico, es posible que el enchufe

inteligente no vuelva a encenderse

hasta que el suministro de energía se

restaure. Por esta razón, los

refrigeradores a conexión u otros

dispositivos que requieren del suministro

constante de energía, no deben

conectarse al enchufe inteligente.

R Después de conectar un dispositivo

eléctrico al enchufe inteligente,

asegúrese de que el enchufe inteligente

esté conectado con firmeza a la toma de

corriente.

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Cómo registrar el

enchufe inteligente

Este procedimiento no es necesario para

unidades que son parte de un paquete.

Antes de que pueda usar el enchufe

inteligente, se debe registrar en el hub.

Si compró los dispositivos por separado (es

decir, no como parte de un paquete), debe

registrar cada dispositivo en el hub.

Puede registrar cada unidad mediante los

botones de registro o la aplicación [Red

doméstico].

Uso de los botones de registro

1 Hub:

Oprima y mantenga oprimido M

OTHER DEVICEN hasta que el Led

indicador parpadee en verde.

2 Enchufe inteligente:

Oprima y mantenga oprimido M N

hasta que el Led indicador parpadee

en verde (página 3).

R Cuando se ha completado el

registro, el hub emitirá un pitido

largo.

Nota:

R Para cancelar el registro, presione el

botón de registro en el hub y en el

enchufe inteligente.

R Si el registro falla, el hub emitirá varios

pitidos cortos.

Uso de la aplicación

Cuando registre el enchufe inteligente con

la aplicación [Red doméstico], puede

asignar un nombre a sus dispositivos y

agruparlos por ubicación. Para obtener más

información, consulte la Guía del usuario

(página 6).

Alcance de la

comunicación

inalámbrica

El alcance de la comunicación inalámbrica

de cada dispositivo en el sistema del hub

es de aproximadamente 50 m (160 pies) en

interiores y de aproximadamente 300 m

(1,000 pies) en el exterior. Es posible que la

comunicación inalámbrica no sea tan

confiable cuando se encuentran los

obstáculos siguientes entre el hub y otros

dispositivos.

R Puertas o pantallas metálicas

R Paredes que contengan aislamiento de

aluminio

R Paredes de hormigón o hierro corrugado

R Ventanas de vidrio doble

R Varias paredes

R Cuando los dispositivos están en pisos o

edificios diferentes

Nota:

R Si el Led indicador parpadea en rojo, se

encuentra fuera de alcance del hub. En

este caso, confirme todas las

conexiones, incluso las del hub.

Para obtener ayuda, visite www.panasonic.com/support

Configuración

Cómo probar el

enchufe inteligente

Después de instalar la aplicación [Red

doméstico] en su dispositivo móvil, puede

usarlo para encender y apagar el enchufe

inteligente. Para obtener más información,

consulte la Guía del usuario (página 6).

1 Desde la pantalla de inicio de la

aplicación [Red doméstico], toque

[Enchufe].

2 Seleccione la pestaña [Individual].

3 Toque el icono del enchufe inteligente

deseado.

R Confirme que el enchufe inteligente

seleccionado encienda y apague

cuando toque su icono.

Acceso a la Guía del

usuario

La Guía del usuario es una colección de

documentación en línea que lo ayuda a

aprovechar al máximo la aplicación [Red

doméstico].

1 iPhone

/iPad

Toque en la pantalla de inicio de

la aplicación.

Dispositivos Android™

Toque u oprima el botón menú de

su dispositivo en la pantalla de inicio

de la aplicación.

2 Toque [Guía del usuario].

Nota:

R También puede acceder a la Guía del

usuario mediante la página web a

continuación.

www.panasonic.net/pcc/support/tel/

homenetwork/manual/

Para obtener ayuda, visite www.panasonic.com/support

Apéndice

Notas

Panasonic KXHN6003 Instrucciones de operación

Marca: Panasonic

Modelo: KXHN6003

Tipo: Instrucciones de operación

Este manual también es adecuado para

Descargar PDF

informe

En otros idiomas

English: Panasonic KXHN6003 Operating instructions

Panasonic KXHN6003 Instrucciones de operación

Este manual también es adecuado para

Panasonic KXHN6003 Instrucciones de operación

En otros idiomas

Documentos relacionados