ASROCK N73V-S El manual del propietario

Marca: ASROCK

Modelo: N73V-S

Tipo: El manual del propietario

Este manual también es adecuado para

N73PV-S

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documen-

tation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identifica-

tion or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Specifications and information contained in this guide are furnished for informational

use only and subject to change without notice, and should not be constructed as a

commitment by ASRock. ASRock assumes no responsibility for any errors or omissions

that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or

conditions of merchantability or fitness for a particular purpose. In no event shall

ASRock, its directors, officers, employees, or agents be liable for any indirect, special,

incidental, or consequential damages (including damages for loss of profits, loss of

business, loss of data, interruption of business and the like), even if ASRock has been

advised of the possibility of such damages arising from any defect or error in the guide

or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in

California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Published December 2008

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

Motherboard LMotherboard L

Motherboard L

ayout (N73PVayout (N73PV

ayout (N73PV

-S)-S)

-S)

1 PS2_USB_PWR1 Jumper 15 Chassis Speaker Header

2 775-Pin CPU Socket (SPEAKER 1, Purple)

3 NVIDIA GeForce 7100 / nForce 630i Chipset 16 Print Port Header (LPT1, Purple)

4 CPU Fan Connector (CPU_FAN1) 17 Floppy Connector (FLOPPY1)

5 2 x 240-pin DDR2 DIMM Slots 18 Front Panel Audio Header

(DDRII_1, DDRII_2; Yellow) (HD_AUDIO1, Lime)

6 ATX Power Connector (ATXPWR1) 19 Internal Audio Connector: CD1 (Black)

7 IDE1 Connector (IDE1, Blue) 20 PCI Slots (PCI1- 2)

8 Primary SATAII Connector (SATAII_1; Red) 21 PCI Express x16 Slot (PCIE2)

9 Chassis Fan Connector (CHA_FAN1) 22 PCI Express x1 Slot (PCIE1)

10 Clear CMOS Jumper (CLRCMOS1) 23 BIOS SPI Chip

11 Third SATAII Connector (SATAII_3; Red) 24 USB 2.0 Header (USB8_9, Blue)

12 Fourth SATAII Connector (SATAII_4; Red) 25 USB 2.0 Header (USB6_7, Blue)

13 Secondary SATAII Connector (SATAII_2; Red) 26 USB 2.0 Header (USB4_5, Blue)

14 System Panel Header (PANEL1, Orange) 27 ATX 12V Connector (ATX12V1)

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

Motherboard LMotherboard L

Motherboard L

ayout (N73Vayout (N73V

ayout (N73V

-S)-S)

-S)

1 PS2_USB_PWR1 Jumper 15 Chassis Speaker Header

2 775-Pin CPU Socket (SPEAKER 1, Purple)

3 NVIDIA GeForce 7050 / nForce 610i Chipset 16 Print Port Header (LPT1, Purple)

4 CPU Fan Connector (CPU_FAN1) 17 Floppy Connector (FLOPPY1)

5 2 x 240-pin DDR2 DIMM Slots 18 Front Panel Audio Header

(DDRII_1, DDRII_2; Yellow) (HD_AUDIO1, Lime)

6 ATX Power Connector (ATXPWR1) 19 Internal Audio Connector: CD1 (Black)

7 IDE1 Connector (IDE1, Blue) 20 PCI Slots (PCI1- 2)

8 Primary SATAII Connector (SATAII_1; Red) 21 PCI Express x16 Slot (PCIE2)

9 Chassis Fan Connector (CHA_FAN1) 22 PCI Express x1 Slot (PCIE1)

10 Clear CMOS Jumper (CLRCMOS1) 23 BIOS SPI Chip

11 Third SATAII Connector (SATAII_3; Red) 24 USB 2.0 Header (USB6_7, Blue)

12 Fourth SATAII Connector (SATAII_4; Red) 25 USB 2.0 Header (USB4_5, Blue)

13 Secondary SATAII Connector (SATAII_2; Red) 26 ATX 12V Connector (ATX12V1)

14 System Panel Header (PANEL1, Orange)

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

I/O PI/O P

I/O P

anelanel

anel

1 PS/2 Mouse Port (Green) 6 Microphone (Pink)

2 USB 2.0 Ports (USB23) 7 USB 2.0 Ports (USB01)

3 RJ-45 Port 8 VGA Port

4 Line In (Light Blue) 9 COM Port

5 Line Out (Lime) 10 PS/2 Keyboard Port (Purple)

* To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows

XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker

and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then

reboot your system.

For Windows

Vista

After restarting your computer, please double-click “Realtek HD Audio Manager” on the

system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device

advanced settings”, choose “Make front and rear output devices playbacks two different audio

streams simultaneously”, and click “ok”. Then reboot your system.

ASRock N73PV-S / N73V-S Motherboard

1. Introduction1. Introduction

1. Introduction

Thank you for purchasing ASRock N73PV-S / N73V-S motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-

step installation guide. More detailed information of the motherboard can be found in

the user manual presented in the Support CD.

Because the motherboard specifications and the BIOS software might be

updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.1 P1.1 P

1.1 P

ackack

ack

age Contentsage Contents

age Contents

ASRock N73PV-S / N73V-S Motherboard

(Micro ATX Form Factor: 9.6-in x 7.0-in, 24.4 cm x 17.8 cm)

ASRock N73PV-S / N73V-S Quick Installation Guide

ASRock N73PV-S / N73V-S Support CD

One 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable (Optional)

One Serial ATA (SATA) Data Cable (Optional)

One Serial ATA (SATA) HDD Power Cable (Optional)

One I/O Panel Shield

EnglishEnglish

English

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

1.21.2

1.2

SpecificationsSpecifications

Specifications

Platform - Micro ATX Form Factor: 9.6-in x 7.0-in, 24.4 cm x 17.8 cm

CPU - LGA 775 for Intel

Core

2 Extreme / Core

2 Quad / Core

2 Duo / Pentium

Dual Core / Celeron

supporting Quad Core Yorkfield and Dual Core Wolfdale

processors

- FSB1333/1066/800/533MHz

- Supports Hyper-Threading Technology (see CAUTION 1)

- Supports Untied Overclocking Technology (see CAUTION 2)

- Supports EM64T CPU

Chipset - NVIDIA

GeForce 7100 / nForce 630i (N73PV-S)

- NVIDIA

GeForce 7050 / nForce 610i (N73V-S)

Memory - 2 x DDR2 DIMM slots

- Support DDR2 800/667/533 non-ECC, un-buffered memory

- Max. capacity of system memory: 16GB (see CAUTION 3)

Expansion Slot - 1 x PCI Express x16 slot

- 1 x PCI Express x1 slot

- 2 x PCI slots

Graphics - Integrated NVIDIA

GeForce 7100 (N73PV-S)

- Integrated NVIDIA

GeForce 7050 (N73V-S)

- DX9.0 VGA, Pixel Shader 3.0

- Max. shared memory 256MB (see CAUTION 4)

Audio - 5.1 CH Windows

Vista

Premium Level HD Audio

(ALC662 Audio Codec)

LAN - Realtek PHY RTL8201EL

- Speed: 10/100 Ethernet

- Supports Wake-On-LAN

Rear Panel I/O I/O Panel

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x Serial Port: COM1

- 1 x VGA Port

- 4 x Ready-to-Use USB 2.0 Ports

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

- HD Audio Jack: Line in / Front Speaker / Microphone

Connector - 4 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0,

RAID 1, RAID 0+1, JBOD and RAID 5), NCQ, AHCI and “Hot

Plug” functions (see CAUTION 5)

* RAID 0+1 and RAID 5 functions are for N73PV-S only

- 1 x ATA133 IDE connector (supports 2 x IDE devices)

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

- 1 x Floppy connector

- 1 x Print port header

- CPU/Chassis FAN connector

- 24 pin ATX power connector

- 4 pin 12V power connector

- CD in header

- Front panel audio connector

- 3 x USB 2.0 headers (support 6 USB 2.0 ports) (N73PV-S)

(see CAUTION 6)

- 2 x USB 2.0 headers (support 4 USB 2.0 ports) (N73V-S)

(see CAUTION 6)

BIOS Feature - 4Mb AMI BIOS

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- SMBIOS 2.3.1 Support

- Supports Smart BIOS

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version)

Unique Feature - ASRock OC Tuner (see CAUTION 7)

- Intelligent Energy Saver (see CAUTION 8)

- Instant Boot

- Hybrid Booster:

- CPU Frequency Stepless Control (see CAUTION 9)

- ASRock U-COP (see CAUTION 10)

- Boot Failure Guard (B.F.G.)

Hardware - CPU Temperature Sensing

Monitor - Chassis Temperature Sensing

- CPU Fan Tachometer

- Chassis Fan Tachometer

- CPU Quiet Fan

- Voltage Monitoring: +12V, +5V, +3.3V, Vcore

OS - Microsoft

Windows

XP / XP 64-bit / Vista

/ Vista

64-bit compliant

Certifications - FCC, CE

* For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking, including

adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using

the third-party overclocking tools. Overclocking may affect your system stability, or

even cause damage to the components and devices of your system. It should be

done at your own risk and expense. We are not responsible for possible damage

caused by overclocking.

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

CAUTION!

1. About the setting of “Hyper Threading Technology”, please check page

39 of “User Manual“ in the support CD.

2. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 21 for details.

3. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

and Windows

Vista

. For Windows

XP 64-bit and Windows

Vista

64-bit with 64-bit CPU, there is no such limitation.

4. The maximum shared memory size is defined by the chipset vendor

and is subject to change. Please check NVIDIA

website for the latest

information.

5. Before installing SATAII hard disk to SATAII connector, please read the “SATAII

Hard Disk Setup Guide” on page 24 of “User Manual“ in the support CD to

adjust your SATAII hard disk drive to SATAII mode. You can also connect

SATA hard disk to SATAII connector directly.

6. Power Management for USB 2.0 works fine under Microsoft

Windows

Vista

64-bit / Vista

/ XP 64-bit / XP SP1 or SP2.

7. It is a user-friendly ASRock overclocking tool which allows you to surveil

your system by hardware monitor function and overclock your hardware

devices to get the best system performance under Windows

environment. Please visit our website for the operation procedures of

ASRock OC Tuner. ASRock website: http://www.asrock.com

8. Featuring an advanced proprietary hardware and software design,

Intelligent Energy Saver is a revolutionary technology that delivers

unparalleled power savings. In other words, it is able to provide excep-

tional power saving and improve power efficiency without sacrificing

computing performance. Please visit our website for the operation pro-

cedures of Intelligent Energy Saver.

ASRock website: http://www.asrock.com

9. Although this motherboard offers stepless control, it is not recom-

mended to perform over-clocking. Frequencies other than the recom-

mended CPU bus frequencies may cause the instability of the system

or damage the CPU.

10. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC

system.

ASRock N73PV-S / N73V-S Motherboard

2.2.

InstallationInstallation

Installation

Pre-installation PrecautionsPre-installation Precautions

Pre-installation Precautions

Take note of the following precautions before you install mother-

board components or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any

component. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

2. To avoid damaging the motherboard components due to static

electricity, NEVER place your motherboard directly on the carpet

or the like. Also remember to use a grounded wrist strap or touch

a safety grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded

antstatic pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the

motherboard to the chassis, please do not over-tighten the

screws! Doing so may damage the motherboard.

2.12.1

2.1

CPU InstallationCPU Installation

CPU Installation

For the installation of Intel 775-LAND CPU,

please follow the steps below.

Before you insert the 775-LAND CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

775-Pin Socket Overview

EnglishEnglish

English

1010

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

down and out on the hook to clear

retention tab.

Step 1-2. Rotate the load lever to fully open po-

sition at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open po-

sition at approximately 100 degrees.

Step 2. Insert the 775-LAND CPU:

Step 2-1. Hold the CPU by the edges where are

marked with black lines.

Step 2-2. Orient the CPU with IHS (Integrated

Heat Sink) up. Locate Pin1 and the two

orientation key notches.

For proper inserting, please ensure to match the two orientation key

notches of the CPU with the two alignment keys of the socket.

Step 2-3. Carefully place the CPU into the socket

by using a purely vertical motion.

Step 2-4. Verify that the CPU is within the socket

and properly mated to the orient keys.

Step 3. Remove PnP Cap (Pick and Place Cap):

Use your left hand index finger and thumb to

support the load plate edge, engage PnP cap

with right hand thumb and peel the cap from the

socket while pressing on center of PnP cap to

assist in removal.

black line

775-Pin Socket

Pin1

alignment key

Pin1

orientation

key notch

orientation

key notch

775-LAND CPU

1111

ASRock N73PV-S / N73V-S Motherboard

1. It is recommended to use the cap tab to handle and avoid kicking

off the PnP cap.

2. This cap must be placed if returning the motherboard for after

service.

Step 4. Close the socket:

Step 4-1. Rotate the load plate onto the IHS.

Step 4-2. While pressing down lightly on load

plate, engage the load lever.

Step 4-3. Secure load lever with load plate tab

under retention tab of load lever.

2.22.2

2.2

Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink

Installation of CPU Fan and Heatsink

For proper installation, please kindly refer to the instruction manuals of your CPU fan

and heatsink.

Below is an example to illustrate the installation of the heatsink for 775-LAND CPU.

Step 1. Apply thermal interface material onto center

of IHS on the socket surface.

Step 2. Place the heatsink onto the socket. Ensure

fan cables are oriented on side closest to the

CPU fan connector on the motherboard

(CPU_FAN1, see page 2/3, No. 4).

Step 3. Align fasteners with the motherboard

throughholes.

Step 4. Rotate the fastener clockwise, then press

down on fastener caps with thumb to install

and lock. Repeat with remaining fasteners.

If you press down the fasteners without rotating them clockwise,

the heatsink cannot be secured on the motherboard.

Step 5. Connect fan header with the CPU fan

connector on the motherboard.

Step 6. Secure excess cable with tie-wrap to ensure

cable does not interfere with fan operation or

contact other components.

EnglishEnglish

English

1212

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

2.3 Installation of Memor2.3 Installation of Memor

2.3 Installation of Memor

y Modules (DIMM)y Modules (DIMM)

y Modules (DIMM)

This motherboard provides two 240-pin DDR2 (Double Data Rate 2) DIMM slots.

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the

slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

1313

ASRock N73PV-S / N73V-S Motherboard

2.4 Expansion Slots (PCI and PCI Express Slots)2.4 Expansion Slots (PCI and PCI Express Slots)

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 2 PCI Express slots on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

PCIE slots: PCIE1 (PCIE x1 slot) is used for PCI Express cards with x1 lane width

cards, such as Gigabit LAN card, SATA2 card, etc.

PCIE2 (PCIE x16 slot) is used for PCI Express cards with x16 lane

width graphics cards.

Installing an expansion cardInstalling an expansion card

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power supply

is switched off or the power cord is unplugged. Please read the documentation

of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws

for later use.

Step 3. Align the card connector with the slot and press firmly until the card is com-

pletely seated on the slot.

Step 4. Fasten the card to the chassis with screws.

EnglishEnglish

English

1414

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

2.5 Easy Multi Monitor Feature2.5 Easy Multi Monitor Feature

2.5 Easy Multi Monitor Feature

This motherboard supports Multi Monitor upgrade. With the internal onboard VGA and

the external add-on PCI Express VGA card, you can easily enjoy the benefits of Multi

Monitor feature. Please refer to the following steps to set up a multi monitor

environment:

1. Install the NVIDIA

PCI Express VGA card to PCIE2 (PCIE x16 slot). Please refer

to page 13 for proper expansion card installation procedures for details.

2. Connect the D-Sub monitor cable to the VGA/D-Sub port on the I/O panel of this

motherboard. Connect another D-Sub monitor cable to the VGA/D-Sub connector of

the add-on PCI Express VGA card. Connect the DVI-D monitor cable to the

VGA/DVI-D connector of the add-on PCI Express VGA card.

3. Boot your system. Press <F2> to enter BIOS setup. Enter “Share Memory”

option to adjust the memory capability to [16MB], [32MB], [64MB], [128MB] or

[256MB] to enable the function of onboard VGA/D-sub. Please make sure that

the value you select is less than the total capability of the system memory. If

you do not adjust the BIOS setup, the default value of “Share Memory”, [Auto],

will disable onboard VGA/D-Sub function when the add-on VGA card is inserted

to this motherboard.

4. Install the onboard VGA driver to your system. If you have installed the onboard

VGA driver already, there is no need to install it again.

5. Set up a multi-monitor display.

For Windows

XP / XP 64-bit OS:

Right click the desktop, choose “Properties”, and select the “Settings” tab so

that you can adjust the parameters of the multi-monitor according to the steps

below.

A. Click the “Identify” button to display a large number on each monitor.

B. Right-click the display icon in the Display Properties dialog that you wish

to be your primary monitor, and then select “Primary”. When you use

multiple monitors with your card, one monitor will always be Primary, and

all additional monitors will be designated as Secondary.

C. Select the display icon identified by the number 2.

D. Click “Extend my Windows desktop onto this monitor”.

E. Right-click the display icon and select “Attached”, if necessary.

F. Set the “Screen Resolution” and “Color Quality” as appropriate for the

second monitor. Click “Apply” or “OK” to apply these new values.

G. Repeat steps C through E for the diaplay icon identified by the number

one, two and three.

For Windows

Vista

/ Vista

64-bit OS:

Right click the desktop, choose “Personalize”, and select the “Display

Settings” tab so that you can adjust the parameters of the multi-monitor

according to the steps below.

A. Click the number ”2” icon.

1515

ASRock N73PV-S / N73V-S Motherboard

B. Click the items “This is my main monitor” and “Extend the desktop onto

this monitor”.

C. Click “OK” to save your change.

D. Repeat steps A through C for the display icon identified by the number

one, two and three.

6. Use Multi Monitor feature. Click and drag the display icons to positions

representing the physical setup of your monitors that you would like to use. The

placement of display icons determines how you move items from one monitor to

another.

2.6 Jumpers Setup2.6 Jumpers Setup

2.6 Jumpers Setup

The illustration shows how jumpers are setup.

When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap is

placed on pins, the jumper is “Open”. The il-

lustration shows a 3-pin jumper whose pin1

and pin2 are “Short” when jumper cap is placed

on these 2 pins.

Jumper Setting Description

PS2_USB_PWR1 Short pin2, pin3 to enable

(see p.2/3 No. 1) +5VSB (standby) for PS/2

or USB wake up events.

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power

supply.

Clear CMOS Jumper

(CLRCMOS1)

(see p.2/3 No. 10)

Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes

system setup information such as system password, date, time, and system

setup parameters. To clear and reset the system parameters to default setup,

please turn off the computer and unplug the power cord from the power supply.

After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1

for 5 seconds. However, please do not clear the CMOS right after you update the

BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you

must boot up the system first, and then shut it down before you do the clear-

CMOS action.

Short Open

Clear CMOSDefault

EnglishEnglish

English

1616

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

2.7 Onboard Headers and Connectors2.7 Onboard Headers and Connectors

2.7 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper

caps over the headers and connectors will cause permanent dam-

age of the motherboard!

FDD connector

(33-pin FLOPPY1)

(see p.2/3 No. 17)

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the

connector.

Primary IDE connector (Blue)

(39-pin IDE1, see p.2/3 No. 7)

Note: Please refer to the instruction of your IDE device vendor for the details.

Serial ATAII Connectors These four Serial ATAII (SATAII)

(SATAII_1: see p.2/3, No. 8) connectors support SATA data

(SATAII_2: see p.2/3, No. 13) cables for internal storage

(SATAII_3: see p.2/3, No. 11) devices. The current SATAII

(SATAII_4: see p.2/3, No. 12) interface allows up to 3.0 Gb/s

data transfer rate.

connect the black end

to the IDE devices

connect the blue end

to the motherboard

80-conductor ATA 66/100133 cable

Serial ATA (SATA) Either end of the SATA data cable

Data Cable can be connected to the SATA /

(Optional) SATAII hard disk or the SATAII

connector on this motherboard.

the red-striped side to

Pin1

Serial ATA (SATA) Please connect the black end of

Power Cable SATA power cable to the power

(Optional) connector on each drive. Then

connect the white end of SATA

power cable to the power

connector of the power supply.

connect to

the power

supply

connect to the SATA

HDD power connector

SATAII_1 SATAII_3

SATAII_2 SATAII_4

1717

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

N73PV-S:

USB 2.0 Headers Besides four default USB 2.0

(9-pin US4_5) ports on the I/O panel, there are

(see p.2 No. 26) three USB 2.0 headers on this

motherboard. Each USB 2.0

header can support two USB

2.0 ports.

(9-pin USB6_7)

(see p.2 No. 25)

(9-pin USB8_9)

(see p.2 No. 24)

N73V-S:

USB 2.0 Headers Besides four default USB 2.0

(9-pin US4_5) ports on the I/O panel, there are

(see p.3 No. 25) two USB 2.0 headers on this

motherboard. Each USB 2.0

header can support two USB

2.0 ports.

(9-pin USB6_7)

(see p.3 No. 24)

Print Port Header This is an interface for print

(25-pin LPT1) port cable that allows

(see p.2/3 No. 16) convenient connection of printer

devices.

1818

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

System Panel Header This header accommodates

(9-pin PANEL1) several system front panel

(see p.2/3 No. 14) functions.

1. High Definition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select

Chipset Configuration. Set the Front Panel Control option from

[Auto] to [Enabled].

F. Enter Windows system. Click the icon on the lower right hand

taskbar to enter Realtek HD Audio Manager.

For Windows

XP / XP 64-bit OS:

Click “Audio I/O”, select “Connector Settings” , choose

“Disable front panel jack detection”, and save the change by

clicking “OK”.

For Windows

Vista

/ Vista

64-bit OS:

Click the right-top “Folder” icon , choose “Disable front

panel jack detection”, and save the change by clicking “OK”.

Front Panel Audio Header This is an interface for front

(9-pin HD_AUDIO1) panel audio cable that allows

(see p.2/3 No. 18) convenient connection and

control of audio devices.

Internal Audio Connectors This connector allows you

(4-pin CD1) to receive stereo audio input

(CD1: see p.2/3 No. 19) from sound sources such as

a CD-ROM, DVD-ROM, TV

tuner card, or MPEG card.

CD1

1919

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

ATX 12V Connector Please connect an ATX 12V

(4-pin ATX12V1) power supply to this connector.

(see p.2 No. 27 or p.3 No. 26)

ATX Power Connector Please connect an ATX power

(24-pin ATXPWR1) supply to this connector.

(see p.2/3 No. 6)

20-Pin ATX Power Supply Installation

Though this motherboard provides 24-pin ATX power connector,

it can still work if you adopt a traditional 20-pin ATX power supply.

To use the 20-pin ATX power supply, please plug your power

supply along with Pin 1 and Pin 13.

Chassis Fan Connector Please connect a chassis fan

(3-pin CHA_FAN1) cable to this connector and

(see p.2/3 No. 9) match the black wire to the

ground pin.

CPU Fan Connector Please connect a CPU fan cable

(4-pin CPU_FAN1) to this connector and match

(see p.2/3 No. 4) the black wire to the ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin

CPU fan still can work successfully even without the fan speed control function.

If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this

motherboard, please connect it to Pin 1-3.

3-Pin Fan Installation

Pin 1-3 Connected

Chassis Speaker Header Please connect the chassis

(4-pin SPEAKER 1) speaker to this header.

(see p.2/3 No. 15)

2020

ASRock N73PV-S / N73V-S Motherboard

EnglishEnglish

English

2.9.2 Installing Windows2.9.2 Installing Windows

2.9.2 Installing Windows

®®

Vista Vista

Vista

TMTM

/ Vista / Vista

/ Vista

TMTM

64-bit Without 64-bit Without

64-bit Without

RAID F RAID F

RAID F

unctionsunctions

unctions

If you want to install Windows

Vista

/ Windows

Vista

64-bit on your SATA / SATAII

HDDs without RAID functions, please follow below steps.

Using SATA / SATAII HDDs without NCQ and Hot Plug functions

STEP 1: Set Up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set the “SATA Operation Mode” option to [IDE].

STEP 2: Install Windows

Vista

/ Vista

64-bit OS on your system.

2.82.8

2.8

Driver Installation GuideDriver Installation Guide

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive

first. Then, the drivers compatible to your system can be auto-detected and listed on

the support CD driver page. Please follow the order from up to bottom side to install

those required drivers. Therefore, the drivers you install can work properly.

2.92.9

2.9

Installing WindowsInstalling Windows

Installing Windows

®®

XP / XP 64-bit / Vista XP / XP 64-bit / Vista

XP / XP 64-bit / Vista

TM TM

/ Vista/ Vista

/ Vista

TMTM

64-bit W64-bit W

64-bit W

ithout RAID Fithout RAID F

ithout RAID F

unctionsunctions

unctions

If you want to install Windows

XP, Windows

XP 64-bit, Windows

Vista

or Windows

Vista

64-bit on your SATA / SATAII HDDs without RAID functions, please follow below

procedures according to the OS you install.

2.9.1 Installing Windows2.9.1 Installing Windows

2.9.1 Installing Windows

®®

XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID

XP / XP 64-bit Without RAID

F F

unctionsunctions

unctions

If you want to install Windows

XP / Windows

XP 64-bit on your SATA / SATAII HDDs

without RAID functions, please follow below steps.

Using SATA / SATAII HDDs without NCQ and Hot Plug functions

STEP 1: Set Up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set the “SATA Operation Mode” option to [IDE].

STEP 2: Install Windows

XP / XP 64-bit OS on your system.

Using SATA / SATAII HDDs with NCQ and Hot Plug functions

STEP 1: Set Up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set the “SATA Operation Mode” option to [AHCI].

2121

ASRock N73PV-S / N73V-S Motherboard

2.102.10

2.10

Installing WindowsInstalling Windows

Installing Windows

XP / XP 64-bit / Vista XP / XP 64-bit / Vista

XP / XP 64-bit / Vista

TM TM

VistaVista

Vista

TMTM

64-bit W 64-bit W

64-bit W

ith RAID Fith RAID F

ith RAID F

unctionsunctions

unctions

If you want to install Windows

XP / XP 64-bit / Vista

/ Vista

64-bit on your SATA /

SATAII HDDs with RAID functions, please refer to the document at the following path in

the Support CD for detailed procedures:

..\ RAID Installation Guide

EnglishEnglish

English

STEP 2: Install Windows

Vista

/ Vista

64-bit OS on your system.

Insert the Windows

Vista

/ Windows

Vista

64-bit optical disk into the optical drive

to boot your system, and follow the instruction to install Windows

Vista

/ Windows

Vista

64-bit OS on your system. When you see “Where do you want to install Windows?

” page, please insert the ASRock Support CD into your optical drive, and click the “Load

Driver” button on the left on the bottom to load the NVIDIA

AHCI drivers. NVIDIA

AHCI

drivers are in the following path in our Support CD:

(There are two ASRock Support CD in the motherboard gift box pack, please

choose the one for Windows

Vista

/ Vista

64-bit.)

.. \ I386 \ AHCI_Vista (For Windows

Vista

OS)

.. \ AMD64\ AHCI_Vista64 (For Windows

Vista

64-bit OS)

After that, please insert Windows

Vista

/ Windows

Vista

64-bit optical disk into

the optical drive again to continue the installation.

2.112.11

2.11

Untied Overclocking TUntied Overclocking T

Untied Overclocking T

echnologyechnology

echnology

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup

to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied

during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate

under a more stable overclocking environment.

Please refer to the warning on page 7 for the possible overclocking risk

before you apply Untied Overclocking Technology.

2222

ASRock N73PV-S / N73V-S Motherboard

3. BIOS Information3. BIOS Information

3. BIOS Information

The Flash Memory on the motherboard stores BIOS Setup Utility. When you start up

the computer, please press <F2> during the Power-On-Self-Test (POST) to enter

BIOS Setup utility; otherwise, POST continues with its test routines. If you wish to

enter BIOS Setup after POST, please restart the system by pressing <Ctl> + <Alt> +

<Delete>, or pressing the reset button on the system chassis. The BIOS Setup

program is designed to be user-friendly. It is a menu-driven program, which allows

you to scroll through its various sub-menus and to select among the predetermined

choices. For the detailed information about BIOS Setup, please refer to the User

Manual (PDF file) contained in the Support CD.

4. Software Support CD information

This motherboard supports various Microsoft

Windows

operating systems: XP /

XP 64-bit / Vista

/ Vista

64-bit. The Support CD that came with the motherboard

contains necessary drivers and useful utilities that will enhance motherboard features.

To begin using the Support CD, insert the CD into your CD-ROM drive. It will display

the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main

Menu does not appear automatically, locate and double-click on the file “ASSETUP.

EXE” from the BIN folder in the Support CD to display the menus.

EnglishEnglish

English

2323

ASRock N73PV-S / N73V-S Motherboard

1. Einführung1. Einführung

1. Einführung

Wir danken Ihnen für den Kauf des ASRock N73PV-S / N73V-S Motherboard, ein

zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von

ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß

der Verpflichtung von ASRock zu Qualität und Halbarkeit.

Diese Schnellinstallationsanleitung führt in das Motherboard und die schrittweise

Installation ein. Details über das Motherboard finden Sie in der

Bedienungsanleitung auf der Support-CD.

Da sich Motherboard-Spezifikationen und BIOS-Software verändern können,

kann der Inhalt dieses Handbuches ebenfalls jederzeit geändert werden. Für

den Fall, dass sich Änderungen an diesem Handbuch ergeben, wird eine neue

Version auf der ASRock-Website, ohne weitere Ankündigung, verfügbar sein.

Die neuesten Grafikkarten und unterstützten CPUs sind auch auf der

ASRock-Website aufgelistet.

ASRock-Website: http://www.asrock.com

Wenn Sie technische Unterstützung zu Ihrem Motherboard oder spezifische

Informationen zu Ihrem Modell benötigen, besuchen Sie bitte unsere

Webseite:

www.asrock.com/support/index.asp

1.1 Kartoninhalt

ASRock N73PV-S / N73V-S Motherboard

(Micro ATX-Formfaktor: 24.4 cm x 17.8 cm; 9.6 Zoll x 7.0 Zoll)

ASRock N73PV-S / N73V-S Schnellinstallationsanleitung

ASRock N73PV-S / N73V-S Support-CD

Ein 80-adriges Ultra-ATA 66/100/133 IDE-Flachbandkabel (optional)

Ein Serial ATA (SATA) -Datenkabel (optional)

Ein Serial ATA (SATA) -Festplattenstromkabel (optional)

Ein I/O Panel Shield

DeutschDeutsch

Deutsch

2424

ASRock N73PV-S / N73V-S Motherboard

DeutschDeutsch

Deutsch

1.21.2

1.2

SpezifikationenSpezifikationen

Spezifikationen

Plattform - Micro ATX-Formfaktor: 24.4 cm x 17.8 cm; 9.6 Zoll x 7.0 Zoll

CPU - LGA 775 für Intel

Core

2 Extreme / Core

2 Quad / Core

2 Duo / Pentium

Dual Core / Celeron

unterstützt Quad Core Yorkfield und Dual Core Wolfdale

Prozessoren

- FSB1333/1066/800/533MHz

- Unterstützt Hyper-Threading-Technologie

(siehe VORSICHT 1)

- Unterstützt Untied-Übertaktungstechnologie

(siehe VORSICHT 2)

- Unterstützt EM64T-CPU

Chipsatz - NVIDIA

GeForce 7100 / nForce 630i (N73PV-S)

- NVIDIA

GeForce 7050 / nForce 610i (N73V-S)

Speicher - 2 x Steckplätze für DDR2

- Unterstützt DDR2 800/667/533 non-ECC, ungepufferter

Speicher

- Max. Kapazität des Systemspeichers: 16GB

(siehe VORSICHT 3)

Erweiterungs- - 1 x PCI Express x16-Steckplätze

steckplätze - 1 x PCI Express x1-Steckplätze

- 2 x PCI -Steckplätze

Onboard-VGA - Integrierte NVIDIA

GeForce7100 (N73PV-S)

- Integrierte NVIDIA

GeForce7050 (N73V-S)

- DX9.0 VGA, Pixel Shader 3.0

- Maximal gemeinsam genutzter Speicher 256 MB

(siehe VORSICHT 4)

Audio - 5.1 CH Windows

Vista

Premium Level HD Audio

(ALC662 Audio Codec)

LAN - Realtek PHY RTL8201EL

- Speed: 10/100 Ethernet

- Unterstützt Wake-On-LAN

E/A-Anschlüsse I/O Panel

an der - 1 x PS/2-Mausanschluss

Rückseite - 1 x PS/2-Tastaturanschluss

- 1 x Serieller port: COM1

- 1 x VGA port

- 4 x Standard-USB 2.0-Anschlüsse

- 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED)

- HD Audiobuchse: Audioeingang / Lautsprecher vorne /

Mikrofon

2525

ASRock N73PV-S / N73V-S Motherboard

Anschlüsse - 4 x SATAII-Anschlüsse, unterstützt bis 3.0 Gb/s

Datenübertragungsrate, unterstützt RAID (RAID 0, RAID 1,

RAID 0+1, JBOD und RAID 5), NCQ, AHCI und “Hot Plug”

Funktionen (siehe VORSICHT 5)

* RAID 0+1 und RAID 5-Funktionen gelten für N73PV-S Nur

- 1 x ATA133 IDE-Anschlüsse (Unterstützt bis 2 IDE-Geräte)

- 1 x FDD-Anschlüsse

- 1 x Druckerport-Anschlussleiste

- CPU/Gehäuse-Lüfteranschluss

- 24-pin ATX-Netz-Header

- 4-pin anschluss für 12V-ATX-Netzteil

- Interne Audio-Anschlüsse

- Anschluss für Audio auf der Gehäusevorderseite

- 3 x USB 2.0-Anschlüsse (unterstützt 6 USB 2,0-Ports)

(N73PV-S) (siehe VORSICHT 6)

- 2 x USB 2.0-Anschlüsse (unterstützt 4 USB 2,0-Ports)

(N73V-S) (siehe VORSICHT 6)

BIOS - 4Mb AMI BIOS

- AMI legal BIOS mit Unterstützung für “Plug and Play”

- ACPI 1.1-Weckfunktionen

- JumperFree-Modus

- SMBIOS 2.3.1

- Unterstützt Smart BIOS

Support-CD - Treiber, Dienstprogramme, Antivirussoftware (Probeversion)

Einzigartige - ASRock OC Tuner (siehe VORSICHT 7)

Eigenschaft - Intelligent Energy Saver (Intelligente Energiesparfunktion)

(siehe VORSICHT 8)

- Sofortstart

- Hybrid Booster:

- Schrittloser CPU-Frequenz-Kontrolle (siehe VORSICHT 9)

- ASRock U-COP (siehe VORSICHT 10)

- Boot Failure Guard (B.F.G. – Systemstartfehlerschutz)

Hardware Monitor - Überwachung der CPU-Temperatur

- Motherboardtemperaturerkennung

- Drehzahlmessung für CPU-Lüfter

- Drehzahlmessung für Gehäuselüfter

- CPU-Lüftergeräuschdämpfung

- Spannungsüberwachung: +12V, +5V, +3.3V, Vcore

Betriebssysteme - Unterstützt Microsoft

Windows

XP / XP 64-Bit / Vista

Vista

64-Bit

Zertifizierungen - FCC, CE

* Für die ausführliche Produktinformation, besuchen Sie bitte unsere Website:

http://www.asrock.com

DeutschDeutsch

Deutsch

2626

ASRock N73PV-S / N73V-S Motherboard

DeutschDeutsch

Deutsch

WARNUNG

Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden

der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von

Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die

Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems

beschädigen. Es geschieht dann auf eigene Gefahr und auf Ihre Kosten. Wir übernehmen

keine Verantwortung für mögliche Schäden, die aufgrund von Overclocking verursacht

wurden.

VORSICHT!

1. Die Einstellung der “Hyper-Threading Technology”, finden Sie auf

Seite 39 des auf der Support-CD enthaltenen Benutzerhandbuches

beschrieben.

2. Dieses Motherboard unterstützt die Untied-Übertaktungstechnologie.

Unter “Entkoppelte Übertaktungstechnologie” auf Seite 21 finden Sie

detaillierte Informationen.

3. Durch Betriebssystem-Einschränkungen kann die tatsächliche

Speichergröße weniger als 4 GB betragen, da unter Windows

XP und

Windows

Vista™ etwas Speicher zur Nutzung durch das System reserviert

wird. Unter Windows

XP 64-bit und Windows

Vista

™

64-bit mit 64-Bit-CPU

besteht diese Einschränkung nicht.

4. Die Maximalspeichergröße ist von den Chipshändler definiert und

umgetauscht. Bitte überprüfen Sie NVIDIA

website für die neuliche

Information.

5. Bevor Sie eine SATA II Festplatte mit dem SATA II Anschluss verbinden,

lesen Sie bitte die “Anleitung zur SATA II Festplatteneinrichtung“ auf

Seite 24, um Ihre SATA II Festplatte in den SATA II Modus

umzuschalten. SATA-Festplatten können Sie auch direkt mit dem SATA

II-Anschluss verbinden.

6. Das Power Management für USB 2.0 arbeitet unter Microsoft

Windows

Vista

64-Bit / Vista

/ XP 64-Bit / XP SP1 oder SP2

einwandfrei.

7. Es ist ein benutzerfreundlicher ASRock Übertaktenswerkzeug, das

erlaubt, dass Sie Ihr System durch den Hardware-Monitor Funktion zu

überblicken und Ihre Hardware-Geräte übertakten, um die beste

Systemleistung unter der Windows

Umgebung zu erreichen.

Besuchen Sie bitte unsere Website für die Operationsverfahren von

ASRock OC Tuner. ASRock-Website: http://www.asrock.com

8. Mit einem fortschrittlichen, eigenständigen Hard- und Softwaredesign

nutzt der Intelligent Energy Saver eine revolutionäre Technologie, die

bisher unerreichte Energieeinsparungen ermöglicht. Mit anderen

Worten: Sie verbrauchen besonders wenig Energie und erreichen

einen hohen Wirkungsgrad, ohne dass dies zu Lasten der

Rechenleistung geht. Auf unseren Internetseiten finden Sie einige

Erläuterungen zur Funktionsweise des Intelligent Energy Saver.

ASRock-Website: http://www.asrock.com

2727

ASRock N73PV-S / N73V-S Motherboard

1.3 Einstellung der Jumper1.3 Einstellung der Jumper

1.3 Einstellung der Jumper

Die Abbildung verdeutlicht, wie Jumper

gesetzt werden. Werden Pins durch

Jumperkappen verdeckt, ist der Jumper

“gebrückt”. Werden keine Pins durch

Jumperkappen verdeckt, ist der Jumper

“offen”. Die Abbildung zeigt einen 3-Pin

Jumper dessen Pin1 und Pin2 “gebrückt” sind,

bzw. es befindet sich eine Jumper-Kappe

auf diesen beiden Pins.

Jumper Einstellun

PS2_USB_PW1 Überbrücken Sie Pin2, Pin3, um

(siehe S.2/3, Punkt 1) +5VSB (Standby) zu setzen

und die PS/2 oder USB-

Weckfunktionen zu aktivieren.

Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A

oder mehr leisten können.

CMOS löschen

(CLRCMOS1, 3-Pin jumper)

(siehe S.2/3, Punkt 10)

Hinweis: CLRCMOS1 erlaubt Ihnen das Löschen der CMOS-Daten. Diese

beinhalten das System-Passwort, Datum, Zeit und die verschiedenen

BIOS-Parameter. Um die Systemparameter zu löschen und auf die

Werkseinstellung zurückzusetzen, schalten Sie bitte den Computer ab

und entfernen das Stromkabel. Benutzen Sie eine Jumperkappe, um die

Pin 2 und Pin 3 an CLRCMOS1 für 5 Sekunden kurzzuschließen. Bitte

vergessen Sie nicht, den Jumper wieder zu entfernen, nachdem das

CMOS gelöscht wurde. Bitte vergessen Sie nicht, den Jumper wieder zu

entfernen, nachdem das CMOS gelöscht wurde. Wenn Sie den CMOS-

Gebrückt Offen

CMOS

löschen

Default-

Einstellung

9. Obwohl dieses Motherboard stufenlose Steuerung bietet, wird

Overclocking nicht empfohlen. Frequenzen, die über den für den

jeweiligen Prozessor vorgesehenen liegen, können das System

instabil werden lassen oder die CPU beschädigen.

10. Wird eine Überhitzung der CPU registriert, führt das System einen

automatischen Shutdown durch. Bevor Sie das System neu starten,

prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert,

und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein.

Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas

Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen.

DeutschDeutsch

Deutsch

2828

ASRock N73PV-S / N73V-S Motherboard

DeutschDeutsch

Deutsch

Serial ATA- (SATA-) SJedes Ende des SATA

Datenkabel Datenkabels kann an die SATA

(Option) / SATAII Festplatte oder das

SATAII Verbindungsstück auf

dieser Hauptplatine

angeschlossen werden.

die rotgestreifte Seite auf Stift 1

1.4 Anschlüsse1.4 Anschlüsse

1.4 Anschlüsse

Anschlussleisten sind KEINE Jumper. Setzen Sie KEINE Jumperkappen

auf die Pins der Anschlussleisten. Wenn Sie die Jumperkappen auf die

Anschlüsse setzen, wird das Motherboard permanent beschädigt!

Anschluss Beschreibung

Anschluss für das

Floppy-Laufwerk

(33-Pin FLOPPY1)

(siehe S.2/3, Punkt 17)

Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1-

Seite des Anschlusses verbunden wird.

Primärer IDE-Anschluss (blau)

(39-pin IDE1, siehe S.2/3, Punkt 7)

Blauer Anschluss Schwarzer Anschluss

zum Motherboard zur Festplatte

80-adriges ATA 66/100/133 Kabel

Hinweis: Details entnehmen Sie bitte den Anweisungen Ihres IDE-Gerätehändlers.

Seriell-ATAII-Anschlüsse Diese vier Serial ATAII-

(SATAII_1: siehe S.2/3 - No. 8) (SATAII-)Verbínder unterstützten

(SATAII_2: siehe S.2/3 - No. 13) SATA-Datenkabel für interne

(SATAII_3: siehe S.2/3 - No. 11) Massenspeichergeräte. Die

(SATAII_4: siehe S.2/3 - No. 12) aktuelle SATAII-Schnittstelle

ermöglicht eine

Datenübertragungsrate bis

3,0 Gb/s.

Inhalt gleich nach dem Aktualisieren des BIOS löschen müssen, müssen

Sie zuerst das System starten und dann wieder ausschalten, bevor Sie den

CMOS-Inhalt löschen.

SATAII_1 SATAII_3

SATAII_2 SATAII_4

2929

ASRock N73PV-S / N73V-S Motherboard

Verbindung zum

Netzteil

Verbindung zum

SATA-HDD-Stromanschluss

N73PV-S:

USB 2.0-Header Zusätzlich zu den vier

(9-pol. USB4_5) üblichen USB 2.0-Ports an den

(siehe S.2 - Nr. 26) I/O-Anschlüssen befinden sich

drei USB 2.0-Anschlussleisten

am Motherboard. Pro USB 2.0-

Anschlussleiste werden zwei

(9-pol. USB6_7) USB 2.0-Ports unterstützt.

(siehe S.2 - Nr. 25)

(9-pol. USB8_9)

(siehe S.2 - Nr. 24)

Serial ATA- (SATA-) Verbinden Sie das schwarze

Stromversorgungskabel Ende des SATA-Netzkabels mit

(Option) dem Netzanschluss am

Laufwerk. Verbinden Sie dann

das weiße Ende des SATA-

Stromversorgungskabels mit

dem Stromanschluss des

Netzteils.

DeutschDeutsch

Deutsch

N73V-S:

USB 2.0-Header Zusätzlich zu den vier

(9-pol. USB4_5) üblichen USB 2.0-Ports an den

(siehe S.3 - Nr. 25) I/O-Anschlüssen befinden sich

zwei USB 2.0-Anschlussleisten

am Motherboard. Pro USB 2.0-

Anschlussleiste werden zwei

(9-pol. USB6_7) USB 2.0-Ports unterstützt.

(siehe S.3 - Nr. 24)

3030

ASRock N73PV-S / N73V-S Motherboard

1. High Definition Audio unterstützt Jack Sensing (automatische Erkennung

falsch angeschlossener Geräte), wobei jedoch die Bildschirmverdrahtung

am Gehäuse HDA unterstützen muss, um richtig zu funktionieren.

Beachten Sie bei der Installation im System die Anweisungen in unserem

Handbuch und im Gehäusehandbuch.

2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie

nachstehend beschrieben an der Front-Audioanschlussleiste:

A. Schließen Sie Mic_IN (MIC) an MIC2_L an.

B. Schließen Sie Audio_R (RIN) an OUT2_R und Audio_L (LIN) an

OUT2_L an.

C. Schließen Sie Ground (GND) an Ground (GND) an.

D. MIC_RET und OUT_RET sind nur für den HD-Audioanschluss gedacht.

Diese Anschlüsse müssen nicht an die AC’97-Audioleiste

angeschlossen werden.

E. Rufen Sie das BIOS-Setup-Dienstprogramm auf. Wechseln Sie zu

Erweiterte Einstellungen und wählen Sie Chipset-Konfiguration. Setzen

Sie die Option Frontleistenkontrolle von [Automatisch] auf [Aktiviert].

F. Rufen Sie das Windows-System auf. Klicken Sie auf das Symbol in der

Taskleiste unten rechts, um den Realtek HD Audio-Manager aufzurufen.

Für Windows

XP / XP 64-Bit Betriebssystem:

Klicken Sie auf “Audio-E/A”, wählen Sie die “Anschlusseinstellungen”

, wählen Sie “Erkennung der Frontleistenbuchse deaktivieren”

und speichern Sie die Änderung durch Klicken auf “OK”.

Anschluss für Audio auf Dieses Interface zu einem

der Gehäusevorderseite Audio-Panel auf der Vorderseite

(9-Pin HD_AUDIO1) Ihres Gehäuses, ermöglicht

(siehe S.2/3, Punkt 18) Ihnen eine bequeme

Kontrolle über Audio-Geräte.

DeutschDeutsch

Deutsch

Druckerport-Anschlussleiste Dies ist eine Schnittstelle zum

(25-pol. LPT1) Anschluss eines Druckerport-

(siehe S.2/3 - No. 16) Kabels, mit dem Sie passende

Drucker auf einfache Weise

anschließen können.

Interne Audio-Anschlüsse Diese ermöglichen Ihnen Stereo-

(4-Pin CD1) Signalquellen, wie z. B. CD-ROM,

(CD1: siehe S.2/3, Punkt 19) DVD-ROM, TV-Tuner oder

MPEG-Karten mit Ihrem System

zu verbinden.

CD1

3131

ASRock N73PV-S / N73V-S Motherboard

System Panel Anschluss Dieser Anschluss ist für die

(9-Pin PANEL1) verschiedenen Funktionen der

(siehe S.2/3, Punkt 14) Gehäusefront.

Gehäuselautsprecher-Header Schließen Sie den

(4-pin SPEAKER1) Gehäuselautsprecher an

(siehe S.2/3, Punkt 15) diesen Header an.

DeutschDeutsch

Deutsch

Für Windows

Vista

/ Vista

64-Bit Betriebssystem:

Die Rechtoberseite „Dateiordner“ Ikone anklicken ,

„Schalttafel Buchse Entdeckung sperren“ wählen und die Änderung

speichern, indem Sie „OKAY“ klicken.

Gehäuse-Lüfteranschluss Verbinden Sie das

(3-pin CHA_FAN1) Gehäuselüfterkabel mit diesem

(siehe S.2/3, Punkt 9) Anschluss und passen Sie den

schwarzen Draht dem

Erdungsstift an.

CPU-Lüfteranschluss Verbinden Sie das CPU -

(4-pin CPU_FAN1) Lüfterkabel mit diesem

(siehe S.2/3, Punkt 4) Anschluss und passen Sie den

schwarzen Draht dem

Erdungsstift an.

Lüfter mit dreipoligem Anschluss installieren

Obwohl dieses Motherboard einen vierpoligen CPU-Lüfteranschluss (Quiet

Fan) bietet, können auch CPU-Lüfter mit dreipoligem Anschluss

angeschlossen werden; auch ohne Geschwindigkeitsregulierung. Wenn Sie

einen dreipoligen CPU-Lüfter an den CPU-Lüferanschluss dieses

Motherboards anschließen möchten, verbinden Sie ihn bitte mit

den Pins 1 – 3.

Pins 1–3 anschließen

ATX-Netz-Header Verbinden Sie die ATX-

(24-pin ATXPWR1) Stromversorgung mit diesem

(siehe S.2/3, Punkt 6) Header.

3232

ASRock N73PV-S / N73V-S Motherboard

Installation eines 20-pol. ATX-Netzteils

Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss

bietet, kann es auch mit einem modifizierten traditionellen 20-pol.

ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu

verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein.

Anschluss für Beachten Sie bitte, dass Sie eine

12V-ATX-Netzteil Stromversorgung mit ATX 12-

(4-pin ATX12V1) Volt-Stecker mit diesem

(siehe S.2, Punkt 27 oder S.3, Punkt 26) Anschluss verbinden müssen,

damit ausreichend Strom

geliefert werden kann.

Andernfalls reicht der Strom

nicht aus, das System zu starten.

DeutschDeutsch

Deutsch

3333

ASRock N73PV-S / N73V-S Motherboard

2. BIOS-Information2. BIOS-Information

2. BIOS-Information

Das Flash Memory dieses Motherboards speichert das Setup-Utility. Drücken Sie

<F2> während des POST (Power-On-Self-Test) um ins Setup zu gelangen, ansonsten

werden die Testroutinen weiter abgearbeitet. Wenn Sie ins Setup gelangen wollen,

nachdem der POST durchgeführt wurde, müssen Sie das System über die

Tastenkombination <Ctrl> + <Alt> + <Delete> oder den Reset-Knopf auf der

Gehäusevorderseite, neu starten. Natürlich können Sie einen Neustart auch

durchführen, indem Sie das System kurz ab- und danach wieder anschalten.

Das Setup-Programm ist für eine bequeme Bedienung entwickelt worden. Es ist

ein menügesteuertes Programm, in dem Sie durch unterschiedliche Untermenüs

scrollen und die vorab festgelegten Optionen auswählen können. Für detaillierte

Informationen zum BIOS-Setup, siehe bitte das Benutzerhandbuch (PDF Datei) auf

der Support CD.

3. Software Support CD information3. Software Support CD information

3. Software Support CD information

Dieses Motherboard unterstützt eine Reiche von Microsoft

Windows

Betriebssystemen: XP / XP 64-Bit / Vista

/ Vista

64-Bit. Die Ihrem Motherboard

beigefügte Support-CD enthält hilfreiche Software, Treiber und Hilfsprogramme, mit

denen Sie die Funktionen Ihres Motherboards verbessern können Legen Sie die

Support-CD zunächst in Ihr CD-ROM-Laufwerk ein. Der Willkommensbildschirm mit

den Installationsmenüs der CD wird automatisch aufgerufen, wenn Sie die “Autorun”-

Funktion Ihres Systems aktiviert haben. Erscheint der Wilkommensbildschirm nicht,

so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der

Support-CD, um die Menüs aufzurufen.

Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert,

d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme

werden dann automatisch installiert.

DeutschDeutsch

Deutsch

3434

ASRock N73PV-S / N73V-S Motherboard

rançaisrançais

rançais

1. Introduction1. Introduction

1. Introduction

Merci pour votre achat d’une carte mère ASRock N73PV-S / N73V-S, une carte mère

très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des

performances excellentes et une conception robuste conformément à l’engagement

d’ASRock sur la qualité et la fiabilité au long terme.

Ce Guide d’installation rapide présente la carte mère et constitue un guide

d’installation pas à pas. Des informations plus détaillées concernant la carte mère

pourront être trouvées dans le manuel l’utilisateur qui se trouve sur le CD

d’assistance.

Les spécifications de la carte mère et le BIOS ayant pu être mis à jour,

le contenu de ce manuel est sujet à des changements sans notification.

Au cas où n’importe qu’elle modification intervenait sur ce manuel, la

version mise à jour serait disponible sur le site web ASRock sans

nouvel avis. Vous trouverez les listes de prise en charge des cartes

VGA et CPU également sur le site Web ASRock.

Site web ASRock, http://www.asrock.com

Si vous avez besoin de support technique en relation avec cette carte

mère, veuillez consulter notre site Web pour de plus amples

informations particulières au modèle que vous utilisez.

www.asrock.com/support/index.asp

1.1 Contenu du paquet1.1 Contenu du paquet

1.1 Contenu du paquet

Carte mère ASRock N73PV-S / N73V-S

(Facteur de forme Micro ATX: 9.6 pouces x 7.0 pouces, 24.4 cm x 17.8 cm)

Guide d’installation rapide ASRock N73PV-S / N73V-S

CD de soutien ASRock N73PV-S / N73V-S

Un câble ruban IDE Ultra ATA 66/100/133 80 conducteurs (en option)

Un câbles de données de série ATA (SATA) (en option)

Un câbles d’alimentation de série ATA (SATA) HDD (en option)

Un I/O Panel Shield

3535

ASRock N73PV-S / N73V-S Motherboard

1.21.2

1.2

SpécificationsSpécifications

Spécifications

Format - Facteur de forme Micro ATX:

9.6 pouces x 7.0 pouces, 24.4 cm x 17.8 cm

CPU - LGA 775 pour Intel

Core

2 Extreme / Core

2 Quad /

Core

2 Duo / Pentium

Dual Core / Celeron

Dual Core /

Celeron

acceptant les processeurs Quad Core Yorkfield et Dual

Core Wolfdale

- FSB1333/1066/800/533MHz

- Prise en charge de la technologie Hyper-Threading

(voir ATTENTION 1)

- Prend en charge la technologie Untied Overclocking

(voir ATTENTION 2)

- Prise en charge de la technologie EM64T par le CPU

Chipsets - NVIDIA

GeForce 7100 / nForce 630i (N73PV-S)

- NVIDIA

GeForce 7050 / nForce 610i (N73V-S)

Mémoire - 2 x slots DIMM DDR2

- Supporte DDR2 800/667/533 non-ECC, sans amortissement

mémoire

- Capacité maxi de mémoire système: 16GB

(voir ATTENTION 3)

Slot d’extension - 1 x slot PCI Express x16

- 1 x slot PCI Express x1

- 2 x slots PCI

VGA sur carte - NVIDIA

Integre GeForece 7100 (N73PV-S)

- NVIDIA

Integre GeForece 7050 (N73V-S)

- VGA DX9.0, nuanceur de pixels 3.0

- mémoire partagée max 256MB (voir ATTENTION 4)

Audio - 5.1 Son haute définition de première qualité CH Windows

Vista

(codec audio ALC662)

LAN - Realtek PHY RTL8201EL

- Vitesse: 10/100 Ethernet

- Support du Wake-On-LAN

Panneau arrière I/O Panel

E/S - 1 x port souris PS/2

- 1 x port clavier PS/2

- 1 x port série: COM 1

- 1 x port VGA

- 4 x ports USB 2.0 par défaut

- 1 x port LAN RJ-45 avec LED (ACT/LED CLIGNOTANTE et LED

VITESSE)

ranran

ran

çaisçais

çais

3636

ASRock N73PV-S / N73V-S Motherboard

rançaisrançais

rançais

- Prise HD Audio: Entrée Ligne / Haut-parleur frontal /

Microphone

Connecteurs - 4 x connecteurs SATAII, prennent en charge un taux de

transfert de données pouvant aller jusqu’à 3.0Go/s,

supporte RAID (RAID 0, RAID 1, RAID 0+1, JBOD et RAID 5),

NCQ, AHCI et “Hot-Plug” (Connexion à chaud)

(voir ATTENTION 5)

* Les fonctions RAID 0+1 e RAID 5 sont pour N73PV-S uniquement

- 1 x ATA133 IDE connecteurs

(prend en charge jusqu’à 2 périphériques IDE)

- 1 x Port Disquette

- 1 x embase de port d’impression

- Connecteur pour ventilateur de CPU/Châssis

- br. 24 connecteur d’alimentation ATX

- br. 4 connecteur d’alimentation 12V ATX

- Connecteurs audio internes

- Connecteur audio panneau avant

- 3 x En-tête USB 2.0 (Prend en charge 6 ports USB 2.0)

(N73PV-S) (voir ATTENTION 6)

- 2 x En-tête USB 2.0 (Prend en charge 4 ports USB 2.0)

(N73V-S) (voir ATTENTION 6)

BIOS - 4Mb BIOS AMI

- BIOS AMI

- Support du “Plug and Play”

- Compatible pour événements de réveil ACPI 1.1

- Gestion jumperless

- Support SMBIOS 2.3.1

- Unterstützt Smart BIOS

CD d’assistance - Pilotes, utilitaires, logiciel anti-virus (Version d’essai)

Caractéristique - Tuner ASRock OC (voir ATTENTION 7)

unique - Économiseur d’énergie intelligent (voir ATTENTION 8)

- l'Instant Boot

- L’accélérateur hybride:

- Contrôle direct de la fréquence CPU (voir ATTENTION 9)

- ASRock U-COP (voir ATTENTION 10)

- Garde d’échec au démarrage (B.F.G.)

Surveillance - Contrôle de la température CPU

système - Mesure de température de la carte mère

- Tachéomètre ventilateur CPU

- Tachéomètre ventilateur châssis

- Ventilateur silencieux d’unité centrale

- Monitoring de la tension: +12V, +5V, +3.3V, Vcore

3737

ASRock N73PV-S / N73V-S Motherboard

ATTENTION!

1. En ce qui concerne le paramétrage “Hyper-Threading Technology”,

veuillez consulter la page 39 du manuel de l’utilisateur sur le CD

technique.

2. Cette carte mère prend en charge la technologie Untied Overclocking.

Veuillez lire “La technologie de surcadençage à la volée” à la page 21

pour plus d’informations.

3. Du fait des limites du système d’exploitation, la taille mémoire réelle

réservée au système pourra être inférieure à 4 Go sous Windows

XP et

Windows

Vista

. Avec Windows

XP 64 bits et Windows

Vista

64 bits

avec CPU 64 bits, il n’y a pas ce genre de limitation.

4. La dimension maximum du memoire partage est definie par le vendeur

de jeu de puces et est sujet de changer. Veuillez verifier la NVIDIA

website pour les informations recentes SVP.

5. Avant d’installer le disque dur SATAII sur le connecteur SATAII, veuillez

lire le «Guide d’Installation du disque dur SATAII», page 24, pour mettre

votre lecteur de disque SATAII en mode SATAII. Vous pouvez également

brancher le disque dur SATA directement sur le connecteur SATAII.

6. La gestion de l’alimentation pour l’USB 2.0 fonctionne bien sous

Microsoft

Windows

Vista

64-bit/ Vista

/ XP 64-bit / XP SP1; SP2.

7. Il s’agit d’un usage facile ASRock overclocking outil qui vous permet

de surveiller votre système en fonction de la monitrice de matériel et

overclocker vos périphériques de matériels pour obtenir les

meilleures performances du système sous environnement

Windows

. S’il vous plaît visitez notre site web pour le

fonctionnement des procédures de Tuner ASRock OC.

ASRock website: http://www.asrock.com

8. Comprenant une conception matérielle et logicielle propriétaire

avancée, Intelligent Energy Saver est une technologie révolutionnaire

qui offre des gains d’énergie incomparables. En d’autres termes, il

est capable d’apporter des économies d’énergie exceptionnelles et

d’améliorer l’efficacité énergétique sans sacrifier aux performances

ATTENTION

Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking,

y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking,

ou utiliser des outils de tiers pour l’overclocking. L’overclocking peut affecter la stabilité

de votre système, ou même causer des dommages aux composants et dispositifs de

votre système. Si vous le faites, c’est à vos frais et vos propres risques. Nous ne

sommes pas responsables des dommages possibles causés par l’overclocking.

ranran

ran

çaisçais

çais

OS - Microsoft

Windows

XP / XP 64-bit / Vista

/ Vista

64-bit

Certifications - FCC, CE

* Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web:

http://www.asrock.com

3838

ASRock N73PV-S / N73V-S Motherboard

rançaisrançais

rançais

1.3 Réglage des cavaliers1.3 Réglage des cavaliers

1.3 Réglage des cavaliers

L’illustration explique le réglage des

cavaliers. Quand un capuchon est placé sur

les broches, le cavalier est « FERME ». Si

aucun capuchon ne relie les broches,le cava-

lier est « OUVERT ». L’illustration montre un

cavalier à 3 broches dont les broches 1 et 2

sont « FERMEES » quand le capuchon est

placé sur ces 2 broches.

Le cavalier Description

PS2_USB_PW1 Court-circuitez les broches 2

(voir p.2/3 fig. 1) et 3 pour choisir +5VSB

(standby) et permettre aux

périphériques PS/2 ou USB de

réveiller le système.

Note: Pour sélectionner +5VSB, il faut obligatoirement 2 Amp et un courant

standby supérieur fourni par l’alimentation.

Effacer la CMOS

(CLRCMOS1)

(voir p.2/3 fig. 10)

Note: CLRCMOS1 vous permet d’effacer les données qui se trouvent dans la

CMOS. Les données dans la CMOS comprennent les informations de

configuration du système telles que le mot de passe système, la date,

l’heure et les paramètres de configuration du système. Pour effacer et

réinitialiser les paramètres du système pour retrouver la configuration par

défaut, veuillez mettre l’ordinateur hors tension et débrancher le cordon

d’alimentation de l’alimentation électrique. Attendez 15 secondes, puis

Ferme Ouvert

Effacer la

CMOS

Paramètres

par défaut

de calcul. Veuillez visiter notre site Web pour les procédures

d’utilisation d’Intelligent Energy Saver.

Site Web ASRock :

http://www.asrock.com

9. Même si cette carte mère offre un contrôle sans souci, il n’est pas

recommandé d’y appliquer un over clocking. Des fréquences de bus

CPU autres que celles recommandées risquent de rendre le système

instable ou d’endommager le CPU et la carte mère.

10. Lorsqu’une surchauffe du CPU est détectée, le système s’arrête

automatiquement. Avant de redémarrer le système, veuillez vérifier que

le ventilateur d’UC sur la carte mère fonctionne correctement et

débranchez le cordon d’alimentation, puis rebranchez-le. Pour améliorer

la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique

entre le CPU le dissipateur lors de l’installation du PC.

3939

ASRock N73PV-S / N73V-S Motherboard

le côté avec fil rouge côté Broche1

1.4 Connecteurs1.4 Connecteurs

1.4 Connecteurs

Les connecteurs NE SONT PAS des cavaliers. NE PLACEZ AUCUN

capuchon sur ces connecteurs. Poser les bouchons pour cavaliers

audessus des connecteurs provoquera des dommages irrémédiables à la

carte mère!

Les connecteurs Description

Connecteur du lecteur

de disquette

(FLOPPY1 br. 33)

(voir p.2/3 fig. 17)

Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le

côté Broche1 du connecteur.

Connecteur IDE primaire (bleu)

(IDE1 br. 39, voir p.2/3 fig. 7)

connecteur bleu connecteur noir

vers la carte mère vers le disque dur

Câble ATA 66/100/133 80 conducteurs

Note: Veuillez vous reporter aux instructions du fabricant de votre IDE périphérique

pour les détails.

Connecteurs Série ATAII

(SATAII_1: voir p.2/3 fig. 8)

(SATAII_2: voir p.2/3 fig. 13)

(SATAII_3: voir p.2/3 fig. 11)

(SATAII_4: voir p.2/3 fig. 12)

Ces quatre connecteurs Serial

ATA (SATAII) prennent en charge

les disques durs SATA ou SATAII

pour les dispositifs de stockage

interne. L’interface SATAII

actuelle permet des taux

transferts de données pouvant

aller jusqu’à 3,0 Go/s.

SATAII_1 SATAII_3

SATAII_2 SATAII_4

ranran

ran

çaisçais

çais

utilisez un capuchon de cavalier pour court-circuiter la broche 2 et la broche 3

sur CLRCMOS1 pendant 5 secondes. Après avoir court-circuité le

cavalier Effacer la CMOS, veuillez enlever le capuchon de cavalier. Toutefois,

veuillez ne pas effacer la CMOS tout de suite après avoir mis le BIOS à jour. Si

vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à

jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant

de procéder à l’opération d’effacement de la CMOS.

4040

ASRock N73PV-S / N73V-S Motherboard

rançaisrançais

rançais

connecter à l’unité

d’alimentation

électrique

connecter au connecteur

d’alimentation du disque

dur SATA

Cordon d’alimentation Veuillez connecter l’extrémité

Série ATA (SATA) noire du cordon d’alimentation

(en option) SATA sur le connecteur

d’alimentation sur chaque unité.

Connectez ensuite l’extrémité

blanche du cordon d’alimentation

SATA sur le connecteur

d’alimentation de l’unité

d’alimentation électrique.

N73PV-S:

En-tête USB 2.0 A côté des quatre ports USB

(USB4_5 br.9) 2.0 par défaut sur le panneau

(voir p.2 No. 26) E/S, il y a trois embases USB

2.0 sur cette carte mère.

Chaque embase USB 2.0 peut

prendre en charge 2 ports USB

(USB6_7 br.9) 2.0.

(voir p.2 No. 25)

(USB8_9 br.9)

(voir p.2 No. 24)

Câble de données Toute cote du cable de data SATA

Série ATA (SATA) peut etre connecte au disque dur

(en option) SATA / SATAII ou au connecteur

SATAII sur la carte mere.

N73V-S:

En-tête USB 2.0 A côté des quatre ports USB

(USB4_5 br.9) 2.0 par défaut sur le panneau

(voir p.3 No. 25) E/S, il y a deux embases USB

2.0 sur cette carte mère.

Chaque embase USB 2.0 peut

prendre en charge 2 ports USB

(USB6_7 br.9) 2.0.

(voir p.3 No. 24)

4141

ASRock N73PV-S / N73V-S Motherboard

Embase de port d’impression AIl s’agit d’une interface pour le

(LPT1 25 broches) câble du port d’impression, qui

(voir p.2/3 No. 16) permet le raccordement

pratique de périphériques

d’impression.

ranran

ran

çaisçais

çais

1. L’audio à haute définition (HDA) prend en charge la détection de fiche,

mais le fil de panneau sur le châssis doit prendre en charge le HDA pour

fonctionner correctement. Veuillez suivre les instructions dans notre

manuel et le manuel de châssis afin installer votre système.

2. Si vous utilisez le panneau audio AC’97, installez-le sur l’adaptateur audio

du panneau avant conformément à la procédure ci-dessous :

A. Connectez Mic_IN (MIC) à MIC2_L.

B. Connectez Audio_R (RIN) à OUT2_R et Audio_L (LIN) à OUT2_L.

C. Connectez Ground (GND) à Ground (GND).

D. MIC_RET et OUT_RET sont réservés au panneau audio HD. Vous

n’avez pas besoin de les connecter pour le panneau audio AC’97.

E. Entrer dans l’utilitaire de configuration du BIOS. Saisir les Paramètres

avancés puis sélectionner Configuration du jeu de puces. Définir

l’option panneau de commande de [Auto] à [Activé].

F. Entrer dans le système Windows. Cliquer sur l’icône sur la barre de

tâches dans le coin inférieur droite pour entrer dans le Gestionnaire

audio Realtek HD.

Pour Windows

XP / XP 64-bit OS:

Cliquer sur « E/S audio», sélectionner « Paramètres du connecteur »

, choisir « Désactiver la détection de la prise du panneau de

commande » et sauvegarder les changements en cliquant sur « OK ».

Pour Windows

Vista

/ Vista

64-bit OS:

Cliquer droit “Fichier” icone , selectionner” la detection

incapable de jack de panel d’avant “ et sauvegarder le changement par

cliquer”ok”.

Connecteur audio panneau C’est une interface pour un câble

avant audio en façade qui permet le

(HD_AUDIO1 br. 9) branchement et le contrôle

(voir p.2/3 fig. 18) commodes de périphériques

audio.

Connecteurs audio internes Ils vous permettent de gérer des

(CD1 br. 4) entrées audio à partir de sources

(CD1: voir p.2/3 fig. 19) stéréo comme un CD-ROM,

DVD-ROM, un tuner TV ou une

carte MPEG.

CD1

4242

ASRock N73PV-S / N73V-S Motherboard

ien que cette carte mère offre un support de (Ventilateur silencieux)

ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien

fonctionner même sans la fonction de commande de vitesse du ventilateur.

Si vous prévoyez de connecter le ventilateur de CPU à 3 broches au

connecteur du ventilateur de CPU sur cette carte mère, veuillez le connecter

aux broches 1-3.

Installation de ventilateur à 3 broches

Broches 1-3 connectées

Connecteur pour ventilateur Veuillez connecter le câble du

de châssis ventilateur du châssis sur ce

(CHA_FAN1 br. 3) connecteur en branchant le fil

(voir p.2/3 fig. 9) noir sur la broche de terre.

Connecteur pour ventilateur Veuillez connecter un câble de

CPU ventilateur d’UC sur ce

(CPU_FAN1 br. 4) connecteur et brancher le fil noir

(voir p.2/3 fig. 4) sur la broche de terre.

Connecteur du haut-parleur Veuillez connecter le haut-

du châssis parleur de châssis sur ce

(SPEAKER1 br. 4) connecteur.

(voir p.2/3 fig. 15)

20-Installation de l’alimentation électrique ATX

Bien que cette carte mère fournisse un connecteur de

courant ATX 24 broches, elle peut encore fonctionner si vous

adopter une alimentation traditionnelle ATX 20 broches. Pour

utiliser une alimentation ATX 20 broches, branchez à

l’alimentation électrique ainsi qu’aux broches 1 et 13.

Connecteur d’alimentation ATX Veuillez connecter une unité

(ATXPWR1 br. 24) d’alimentation ATX sur ce

(voir p.2/3 fig. 6) connecteur.

Connecteur pour panneau Ce connecteur offre plusieurs

(PANEL1 br. 9) fonctions système en façade.

(voir p.2/3 fig. 14)

rançaisrançais

rançais

4343

ASRock N73PV-S / N73V-S Motherboard

tées

Connecteur d’alimentation Veuillez noter qu’il est nécessaire

12V ATX de connecter une unité

(ATX12V1 br. 4) d’alimentation électrique avec

(voir p.2 fig. 27 ou p.3 fig. 26) prise ATX 12V sur ce

connecteur afin d’avoir une

alimentation suffisante. Faute de

quoi, il ne sera pas possible de

mettre sous tension.

ranran

ran

çaisçais

çais

2. Informations sur le BIOS

La puce Flash Memory sur la carte mère stocke le Setup du BIOS. Lorsque vous

démarrez l’ordinateur, veuillez presser <F2> pendant le POST (Power-On-Self-

Test) pour entrer dans le BIOS; sinon, le POST continue ses tests de routine. Si

vous désirez entrer dans le BIOS après le POST, veuillez redémarrer le système

en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le

boîtier du système. Vous pouvez également redémarrer en éteignant le système et

en le rallumant. L’utilitaire d’installation du BIOS est conçu pour être convivial. C’est

un programme piloté par menu, qui vous permet de faire défiler par ses divers

sous-menus et de choisir parmi les choix prédéterminés. Pour des informations

détaillées sur le BIOS, veuillez consulter le Guide de l’utilisateur (fichier PDF) dans

le CD technique.

3. Informations sur le CD de support3. Informations sur le CD de support

3. Informations sur le CD de support

Cette carte mère supporte divers systèmes d’exploitation Microsoft

Windows

XP / XP 64 bits / Vista

/ Vista

64 bits. Le CD technique livré avec cette carte

mère contient les pilotes et les utilitaires nécessaires pour améliorer les fonctions

de la carte mère. Pour utiliser le CD technique, insérez-le dans le lecteur de CD-

ROM. Le Menu principal s’affiche automatiquement si “AUTORUN” est activé dans

votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez

dans le CD technique le fichier “ASSETUP.EXE” dans le dossier BIN et double-

cliquez dessus pour afficher les menus.

4444

ASRock N73PV-S / N73V-S Motherboard

ItalianoItaliano

Italiano

1. Introduzione

Grazie per aver scelto una scheda madre ASRock N73PV-S / N73V-S, una scheda

madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni

eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della

qualità e della resistenza.

Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la

guida passo-passo all’installazione. Informazioni più dettagliate sulla motherboard si

possono trovare nel manuale per l’utente presente nel CD di supporto.

Le specifiche della scheda madre e il software del BIOS possono

essere aggiornati, pertanto il contenuto di questo manuale può subire

variazioni senza preavviso. Nel caso in cui questo manuale sia

modificato, la versione aggiornata sarà disponibile sul sito di ASRock

senza altro avviso. Sul sito ASRock si possono anche trovare le più

recenti schede VGA e gli elenchi di CPU supportate.

ASRock website http://www.asrock.com

Se si necessita dell’assistenza tecnica per questa scheda madre,

visitare il nostro sito per informazioni specifiche sul modello che si

sta usando.

www.asrock.com/support/index.asp

1.1 Contenuto della confezione1.1 Contenuto della confezione

1.1 Contenuto della confezione

Scheda madre ASRock N73PV-S / N73V-S

(Micro ATX Form Factor: 9.6-in x 7.0-in, 24.4 cm x 17.8 cm)

Guida di installazione rapida ASRock N73PV-S / N73V-S

CD di supporto ASRock N73PV-S / N73V-S

Un cavo IDE 80-pin Ultra ATA 66/100/133 (opzionali)

Un cavi dati Serial ATA (SATA) (opzionali)

Un cavi di alimentazione HDD Serial ATA (SATA) (opzionali)

Un I/O Shield

4545

ASRock N73PV-S / N73V-S Motherboard

1.21.2

1.2

SpecificheSpecifiche

Specifiche

Piattaforma - Micro ATX Form Factor: 9.6-in x 7.0-in, 24.4 cm x 17.8 cm

Processore - LGA 775 per Intel

Core

2 Extreme / Core

2 Quad / Core

Duo / Pentium

Dual Core / Celeron

in grado

di supportare processori Quad Core Yorkfield e Dual Core Wolfdale

- FSB1333/1066/800/533MHz

- Supporto tecnologia Hyper Threading (vedi ATTENZIONE 1)

- Supporta la tecnologia overclocking “slegata”

(vedi ATTENZIONE 2)

- Supporto CPU EM64T

Chipset - NVIDIA

GeForce 7100 / nForce 630i (N73PV-S)

- NVIDIA

GeForce 7050 / nForce 610i (N73V-S)

Memoria - 2 x slot DDR2 DIMM

- Supporta DDR2 800/667/533 non-ECC, momoria senza buffer

- Capacità massima della memoria di sistema: 16GB

(vedi ATTENZIONE 3)

Slot di - 1 x slot PCI Express x16

espansione - 1 x slot PCI Express x1

- 2 x slot PCI

VGA su scheda - Scheda NVIDIA

GeForce 7100 (N73PV-S)

- Scheda NVIDIA

GeForce 7050 (N73V-S)

- VGA DX9.0, Pixel Shader 3.0

- Memoria massima condivisa 256MB (vedi ATTENZIONE 4)

Audio - 5.1 Audio HD CH Windows

Vista

Premium Level

(ALC662 Audio Codec)

LAN - Realtek PHY RTL8201EL

- Velocità: 10/100 Ethernet

- Supporta Wake-On-LAN

Pannello I/O Panel

posteriore - 1 x Porta PS/2 per mouse

I/O - 1 x Porta PS/2 per tastiera

- 1 x Porta COM

- 1 x Porta VGA

- 4 x Porte USB 2.0 già integrate

- 1 x porta LAN RJ-45 con LED (LED azione/collegamento e LED

velocità)

- Connettore HD Audio: ingresso linea / cassa frontale / microfon

Connettori - 4 x connettori SATAII 3.0Go/s, sopporta RAID (RAID 0, RAID 1,

RAID 0+1, JBOD e RAID 5), NCQ, AHCI e “Collegamento a caldo”

(vedi ATTENZIONE 5)

* Le funzioni RAID 0+1 e RAID 5sono disponibili solamente per

N73PV-S

ItalianoItaliano

Italiano

4646

ASRock N73PV-S / N73V-S Motherboard

ItalianoItaliano

Italiano

- 1 x connettori ATA133 IDE (supporta fino a 2 dispositivi IDE)

- 1 x porta Floppy

- 1 x Collettore porta stampante

- Connettore ventolina CPU/telaio

- 24-pin collettore alimentazione ATX

- 4-pin connettore ATX 12V

- Connettori audio interni

- Connettore audio sul pannello frontale

- Header 3 x USB 2.0 (supporto porte 6 USB 2.0) (N73PV-S)

(vedi ATTENZIONE 6)

- Header 2 x USB 2.0 (supporto porte 4 USB 2.0) (N73V-S)

(vedi ATTENZIONE 6)

BIOS - 4Mb AMI BIOS

- Suppor AMI legal BIOS

- Supporta “Plug and Play”

- Compatibile con ACPI 1.1 wake up events

- Supporta jumperfree

- Supporta SMBIOS 2.3.1

- Smart BIOS supportato

CD di - Driver, utilità, software antivirus (Versione dimostrativa)

supporto

Caratteristica - Sintonizzatore ASRock OC (vedi ATTENZIONE 7)

speciale - Intelligent Energy Saver (Risparmio intelligente dell’energia)

(vedi ATTENZIONE 8)

- Instant Boot

- Booster ibrido:

- Stepless control per frequenza del processore

(vedi ATTENZIONE 9)

- ASRock U-COP (vedi ATTENZIONE 10)

- Boot Failure Guard (B.F.G.)

Monitor- - Sensore per la temperatura del processore

aggio - Sensore temperatura scheda madre

Hardware - Indicatore di velocità per la ventola del processore

- Indicatore di velocità per la ventola di raffreddamento

- Ventola CPU silenziosa

- Voltaggio: +12V, +5V, +3.3V, Vcore

Compatibi- - Microsoft

Windows

XP / XP 64 bit / Vista

/ Vista

64 bit

lità SO

Certificazioni - FCC, CE

* Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com

4747

ASRock N73PV-S / N73V-S Motherboard

AVVISO

Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche

la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking

Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può

influenzare la stabilità del sistema, ed anche provocare danni ai componenti ed alle

periferiche del sistema. La procedura è eseguita a proprio rischio ed a proprie spese. Noi

non possiamo essere ritenuti responsabili per possibili danni provocati dall’overclocking.

ATTENZIONE!

1. Per il settaggio della “Tecnologia Hyper-Threading”, per favore

controllare pagina 39 del Manuale dell’utente all’interno del CD di

supporto.

2. Questa scheda madre supporta la tecnologia overclocking “slegata”.

Per i dettagli leggere “Tecnologia di Untied Overclocking” a pagina 21.

3. A causa delle limitazioni del sistema operativo, le dimensioni effettive

della memoria possono essere inferiori a 4GB per l’accantonamento

riservato all’uso del sistema sotto Windows

XP e Windows

Vista

. Per

Windows

XP 64-bit e Windows

Vista

64-bit con CPU 64-bit, non c’è

tale limitazione.

4. La dimensione massima della memoria condivisa viene stabilita dal

venditore del chipset ed e‘ soggetta a modificazioni. Prego fare

riferimento al sito internet NVIDIA

per le ultime informazioni.

5. Prima di installare il disco rigido SATAII al connettore SATAII, leggere

la “Guida di installazione del disco rigido SATAII” a pagina 24 per

regolare l’unità disco SATAII in modalità SATAII. Si può anche

connettere il disco rigido SATA al connettore SATAII direttamente.

6. La Gestione Risorse per USB 2.0 funziona perfettamente con

Microsoft

Windows

Vista

64-bit / Vista

/ XP 64 bit / XP SP1; SP2.

7. Si tratta di uno strumento di sicronizzazione ASRock di face uso in

grado di implementare il controllo del sistema tramite la funzione di

hardware monitor e sincronizzare le Vostre unita‘ hardware per

ottenere la migliore prestazione in Windows

. Prego visitare il nostro

sito Internet per ulteriori dettagli circa l‘uso del Sintonizzatore ASRock

OC. ASRock website: http://www.asrock.com

8. Anche se questa motherboard offre il controllo stepless, non si

consiglia di effettuare l’overclocking. Frequenze del bus del

processore diverse da quelle raccomandate possono causare

instabilità al sistema o danni al processore e alla scheda madre.

9. Dotato di un design avanzato e brevettato dell’hardware e del software,

Intelligent Energy Saver è una tecnologia rivoluzionaria che offre un

risparmio energetico senza pari. In altre parole: è capace di fornire un

risparmio energetico eccezionale e di migliorare l’efficienza senza

sacrificare le prestazioni di computazione. Visitare il nostro sito per

informazioni sulle procedure operative di Intelligent Energy Saver.

Sito ASRock: http://www.asrock.com

ItalianoItaliano

Italiano

4848

ASRock N73PV-S / N73V-S Motherboard

ItalianoItaliano

Italiano

CORTOCIRCUITATO APERTO

1.3 Setup dei Jumpers1.3 Setup dei Jumpers

1.3 Setup dei Jumpers

L’illustrazione mostra come sono settati i jumper.

Quando il ponticello è posizionato sui pin, il jumper

è “CORTOCIRCUITATO”. Se sui pin non ci sono

ponticelli, il jumper è “APERTO”. L’illustrazione

mostra un jumper a 3 pin in cui il pin1 e il pin2 sono

“CORTOCIRCUITATI” quando il ponticello è

posizionato su questi pin.

Jumper Settaggio del Jumper

PS2_USB_PW1 Cortocircuitare pin2, pin3 per

(vedi p.2/3 item 1) settare a +5VSB (standby) e

abilitare PS/2 o USB wake up

events.

Nota: Per selezionare +5VSB, si richiedono almeno 2 Ampere e il consumo di

corrente in standby sarà maggiore.

Resettare la CMOS

(CLRCMOS1)

(vedi p.2/3 item 10)

Nota: CLRCMOS1 permette di cancellare i dati presenti nel CMOS. I dati del CMOS

comprendono le informazioni di configurazione quali la password di sistema,

data, ora, e i parametri di configurazione del sistema. Per cancellare e

ripristinare i parametri del sistema, spegnere il computer e togliere il cavo di

alimentazione dalla presa di corrente. Dopo aver lasciato trascorrere 15

secondi, utilizzare un cappuccio jumper per cortocircuitare i pin 2 e 3 su

CLRCMOS1 per 5 secondi. Dopo aver cortocircuitato il jumper Clear CMOS

jumper, togliere il terminatore jumper. Non cancellare la CMOS subito dopo

aver aggiornato il BIOS. Se è necessario cancellare la CMOS una volta

completato l’aggiornamento del BIOS, è necessario riavviare prima il sistema,

e poi spegnerlo prima di procedere alla cancellazione della CMOS.

Azzeramento

CMOS

Impostazione

predefinita

10. Se il processore si surriscalda, il sistema si chiude

automaticamente. Prima di riavviare il sistema, assicurarsi che la

ventolina CPU della scheda madre funzioni correttamente; scollegare

e ricollegare il cavo d’alimentazione. Per migliorare la dissipazione

del calore, ricordare di applicare l’apposita pasta siliconica tra il

processore e il dissipatore quando si installa il sistema.

4949

ASRock N73PV-S / N73V-S Motherboard

Cavi dati Serial ATA (SATA) Una o altra estremità del cavo

(Opzionale) di dati SATA può essere

collegata al disco rigido SATA /

SATAII o al connettore di SATAII

su questa cartolina base.

Lato del Pin1 con la striscia rossa

1.4 Connettori1.4 Connettori

1.4 Connettori

I connettori NON sono jumpers. NON COLLOCARE i ponticelli sui

connettori. Installando dei cappucci a ponticello sui connettori si

causeranno danni permanenti alla scheda madre!

Connettori Descrizione dei connettori

Connettore del

Floppy disk

(33-pin FLOPPY1)

(vedi p.2/3 item 17)

Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1

del connettore.

Connettore IDE primario (blu)

(39-pin IDE1, vedi p.2/3 item 7)

Connettore blu Connettore nero

alla scheda madre all’hard disk drive

Cavo ATA 66/100/133 a 80 pin

Nota: Fate riferimento alle istruzioni del produttore del dispositivo IDE per maggiori

dettagli.

Connettori Serial ATAII

(SATAII_1: vedi p.2/3 Nr. 8)

(SATAII_2: vedi p.2/3 Nr. 13)

(SATAII_3: vedi p.2/3 Nr. 11)

(SATAII_4: vedi p.2/3 Nr. 12)

Questi quattro connettori Serial

ATA (SATAII) supportano le

periferiche di archiviazione

HD SATA o SATAII per le

funzioni di archiviazione

interna. ATAII (SATAII) suppo-

rtano cavi SATAII per dispositivi

di memoria interni. L’interfaccia

SATAII attuale permette velocità

di trasferimento dati fino a

3.0 Gb/s.

SATAII_1 SATAII_3

SATAII_2 SATAII_4

ItalianoItaliano

Italiano

5050

ASRock N73PV-S / N73V-S Motherboard

ItalianoItaliano

Italiano

Connettere al gruppo

di alimentazione

Connettere all’ailmentazione

dei dischi SATA

N73PV-S:

Collettore USB 2.0 Oltre alle quattro porte USB 2.0

(9-pin USB4_5) predefinite nel pannello I/O, la

(vedi p.2 No. 26) scheda madre dispone di

tre intestazioni USB 2.0.

Ciascuna intestazione USB 2.0

supporta due porte USB 2.0.

(9-pin USB6_7)

(vedi p.2 No. 25)

(9-pin USB8_9)

(vedi p.2 No. 24)

Cavo d’alimentazione Collegare l’estremità nera de

Serial ATA (SATA) cavo di alimentazione SATA al

(Opzionale) connettore di alimentazione del

drive. Poi connettete l’estremità

bianca del cavo di

alimentazione SATA al

connettore power

dell’alimentatore.

N73V-S:

Collettore USB 2.0 Oltre alle quattro porte USB 2.0

(9-pin USB4_5) predefinite nel pannello I/O, la

(vedi p.3 No. 25) scheda madre dispone di

due intestazioni USB 2.0.

Ciascuna intestazione USB 2.0

supporta due porte USB 2.0.

(9-pin USB6_7)

(vedi p.3 No. 24)

5151

ASRock N73PV-S / N73V-S Motherboard

Connettori audio interni Permettono di ricevere input

(4-pin CD1) stereo audio da fonti di

(CD1: vedi p.2/3 item 19) suono come CD-ROM, DVD -

ROM,TV tuner, o schede

MPEG.

Collettore porta stampante Questa è un’interfaccia per il

(LPT1 25 pin) cavo porta stampante che

(vedi p.2/3 No. 16) consente di collegare, con

comodità, dispositivi di stampa.

CD1

ItalianoItaliano

Italiano

Connettore audio sul È un’interfaccia per il cavo del

pannello frontale pannello audio. Che consente

(9-pin HD_AUDIO1) connessione facile e controllo

(vedi p.2/3 item 18) dei dispositivi audio.

1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei

connettori, però il pannello dei cavi sul telaio deve supportare la funzione

HDA (High Definition Audio) per far sì che questa operi in modo corretto.

Attenersi alle istruzioni del nostro manuale e del manuale del telaio per

installare il sistema.

2. Se si utilizza un pannello audio AC’97, installarlo nell’intestazione audio

del pannello anteriore, come indicato di seguito:

A. Collegare Mic_IN (MIC) a MIC2_L.

B. Collegare Audio_R (RIN) a OUT2_R e Audio_L (LIN) ad OUT2_L.

C. Collegare Ground (GND) a Ground (GND).

D. MIC_RET e OUT_RET sono solo per il pannello audio HD. Non è

necessario collegarli per il pannello audio AC’97.

E. Entrare nel programma di impostazione BIOS. Entrare su Impostazioni

avanzate, quindi selezionare Configurazione chipset. Impostare

l’opzione Comando pannello anteriore da [Auto] a [Attivato].

F. Entrare nel sistema di Windows. Fare clic sull’icona situata nell’angolo

inferiore destro della barra delle applicazioni per entrare su Realtek HD

Audio Manager.

Per Windows

XP / XP 64-bit OS:

Fare clic su “Audio I/O”, selezionare “Impostazioni connettore” ,

scegliere “Disattiva rilevazione presa pannello anteriore” e salvare la

modifica facendo clic su “OK”.

5252

ASRock N73PV-S / N73V-S Motherboard

Connettore ventolina telaio Collegare il cavo della ventolina

(3-pin CHA_FAN1) telaio a questo connettore e far

(vedi p.2/3 item 9) combaciare il filo nero al pin

terra.

Connettore ventolina CPU Collegare il cavo della ventolina

(4-pin CPU_FAN1) CPU a questo connettore e far

(vedi p.2/3 item 4) combaciare il filo nero al pin

terra.

Sebbene la presente scheda madre disponga di un supporto per ventola

CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di

funzionare anche senza la funzione di controllo della velocità della ventola.

Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola

CPU su questa scheda madre, collegarla ai piedini 1-3.

Piedini 1-3 collegati

Installazione della ventola a 3 piedini

Collettore alimentazione ATX Collegare la sorgente

(24-pin ATXPWR1) d’alimentazione ATX a questo

(vedi p.2/3 item 6) collettore.

Connettore del panello Questo connettore accoglie

frontale diverse funzioni del pannello

(9-pin PANEL1) frontale.

(vedi p.2/3 item 14)

Collettore casse telaio Collegare le casse del telaio a

(4-pin SPEAKER1) questo collettore.

(vedi p.2/3 item 15)

ItalianoItaliano

Italiano

Per Windows

Vista

/ Vista

64-bit OS:

Cliccare sull‘icona in alto a destra “Folder” (“Cartella”) ,

selezionare “Disable front panel jack detection” “Disabilitare

individuazione presa pannello frontale”) e cliccare “OK” per

memorizzare.

5353

ASRock N73PV-S / N73V-S Motherboard

ati

iedini

Connettore ATX 12V È necessario collegare una

(4-pin ATX12V1) alimentazione con spinotto da

(vedi p.2 item 27 o p.3 item 26) 12V ATX a questo connettore

in modo che possa fornire

energia sufficiente. In caso

contrario l’unità non si avvia.

ItalianoItaliano

Italiano

Installazione dell’alimentatore ATX a 20 pin

Con questa scheda madre, c’è in dotazione un connettore

elettrico ATX a 24 pin, ma può funzionare lo stesso se si

adotta un alimentatore ATX a 20 pin. Per usare l’alimentatore

ATX a 20 pin, collegare l’alimentatore con il Pin 1 e il Pin 13.

2. Informazioni sul BIOS2. Informazioni sul BIOS

2. Informazioni sul BIOS

La Flash Memory sulla scheda madre contiene le Setup Utility. Quando si avvia il

computer, premi <F2> durante il Power-On-Self-Test (POST) della Setup utility del

BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup

dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto

di reset sullo chassis del sistema. Per informazioni più dettagliate circa il Setup del

BIOS, fare riferimento al Manuale dell’Utente (PDF file) contenuto nel cd di

supporto.

3. Software di supporto e informazioni3. Software di supporto e informazioni

3. Software di supporto e informazioni

su CD su CD

su CD

Questa scheda madre supporta vari sistemi operativi Microsoft

Windows

: XP / XP

64-bit / Vista

/ Vista

64-bit. Il CD di supporto a corredo della scheda madre

contiene i driver e utilità necessari a potenziare le caratteristiche della scheda.

Inserire il CD di supporto nel lettore CD-ROM. Se la funzione “AUTORUN” è attivata nel

computer, apparirà automaticamente il Menù principale. Se il Menù principale non

appare automaticamente, posizionarsi sul file “ASSETUP.EXE” nel CESTINO del CD di

supporto e cliccare due volte per visualizzare i menù.

5454

ASRock N73PV-S / N73V-S Motherboard

EspañolEspañol

Español

1. Introducción1. Introducción

1. Introducción

Gracias por su compra de ASRock N73PV-S / N73V-S placa madre, una placa de

confianza producida bajo el control de calidad estricto y persistente. La placa madre

provee realización excelente con un diseño robusto conforme al compromiso de

calidad y resistencia de ASRock.

Esta Guía rápida de instalación contiene una introducción a la placa base y una guía

de instalación paso a paso. Puede encontrar una información más detallada sobre la

placa base en el manual de usuario incluido en el CD de soporte.

Porque las especificaciones de la placa madre y el software de BIOS

podrían ser actualizados, el contenido de este manual puede ser

cambiado sin aviso. En caso de cualquier modificación de este manual,

la versión actualizada estará disponible en el website de ASRock sin

previo aviso. También encontrará las listas de las últimas tarjetas VGA y

CPU soportadas en la página web de ASRock.

Website de ASRock http://www.asrock.com

Si necesita asistencia técnica en relación con esta placa base, visite

nuestra página web con el número de modelo específico de su placa.

www.asrock.com/support/index.asp

1.1 Contenido de la caja1.1 Contenido de la caja

1.1 Contenido de la caja

Placa base ASRock N73PV-S / N73V-S

(Factor forma Micro ATX: 24,4 cm x 17,8 cm, 9,6” x 7,0”)

Guía de instalación rápida de ASRock N73PV-S / N73V-S

CD de soporte de ASRock N73PV-S / N73V-S

Una cinta de datos IDE de conducción 80 Ultra ATA 66/100/133 (Opcional)

Un Cable de Datos Serial ATA (SATA) (Opcional)

Un cable serie ATA (SATA) de alimentación de disco duro (Opcional)

Una protección I/O

5555

ASRock N73PV-S / N73V-S Motherboard

1.21.2

1.2

EspecificaciónEspecificación

Especificación

Plataforma - Factor forma Micro ATX: 24,4 cm x 17,8 cm, 9,6” x 7,0”

Procesador - LGA 775 para Intel

Core

2 Extreme / Core

2 Quad /

Core

2 Duo / Pentium

Dual Core / Celeron

Dual Core /

Celeron

, con soporte para los procesadores Quad Core Yorkfield

y Dual Core Wolfdale

- FSB1333/1066/800/533MHz

- Admite tecnología Hyper Threading (ver ATENCIÓN 1)

- Admite tecnología de aumento de velocidad liberada

(vea ATENCIÓN 2)

- Admite CPU EM64T

Chipset - NVIDIA

GeForce 7100 / nForce 630i (N73PV-S)

- NVIDIA

GeForce 7050 / nForce 610i (N73V-S)

Memoria - 2 x DDR2 DIMM slots

- Apoya DDR2 800/667/533 non-ECC, memoria de un-buffered

- Máxima capacidad de la memoria del sistema: 16GB

(vea ATENCIÓN 3)

Ranuras de - 1 x ranuras PCI Express x16

Expansión - 1 x ranuras PCI Express x1

- 2 x ranuras PCI

VGA OnBoard - Integrada de NVIDIA

GeForce 7100 (N73PV-S)

- Integrada de NVIDIA

GeForce 7050 (N73V-S)

- VGA DX9.0, Sombreador de Píxeles 3.0

- 256MB de Memoria máxima compartida (vea ATENCIÓN 4)

Audio - Sonido HD de Nivel Superior 5.1 Canales Windows

Vista

(Códec de sonido ALC662)

LAN - Realtek PHY RTL8201EL

- Velocidad: 10/100 Ethernet

- Soporta Wake-On-LAN

Entrada/Salida I/O Panel

de Panel - 1 x puerto de ratón PS/2

Trasero - 1 x puerto de teclado PS/2

- 1 x puerto serial: COM1

- 1 x Puerto VGA

- 4 x puertos USB 2.0 predeterminados

- 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y

LED de VELOCIDAD)

- Conexión de HD audio: Entrada de línea / Altavoz frontal /

Micrófono

EspañolEspañol

Español

5656

ASRock N73PV-S / N73V-S Motherboard

EspañolEspañol

Español

Conectores - 4 x conexiones SATAII, admiten una velocidad de

transferencia de datos de hasta 3,0Gb/s, soporta RAID

(RAID 0, RAID 1, RAID 0+1, JBOD y RAID 5), NCQ, AHCI y

“Conexión en caliente” (vea ATENCIÓN 5)

* Las funciones RAID 0+1 y RAID 5 solamente son para N73PV-S

- 1 x ATA133 conexiones IDE

(admite hasta 2 dispositivos IDE)

- 1 x puerto Floppy

- 1 x cabecera de puerto de impresora

- Conector del ventilador del CPU/chasis

- 24-pin cabezal de alimentación ATX

- 4-pin conector de ATX 12V power

- Conector de Audio Interno

- Conector de audio de panel frontal

- 3 x Cabezal USB 2.0 (admite 6 puertos USB 2.0 adicionales)

(N73PV-S) (vea ATENCIÓN 6)

- 2 x Cabezal USB 2.0 (admite 4 puertos USB 2.0 adicionales)

(N73V-S) (vea ATENCIÓN 6)

BIOS - 4Mb AMI BIOS

- AMI legal BIOS

- Soporta “Plug and Play”

- ACPI 1.1 compliance wake up events

- Soporta “jumper free setup”

- Soporta SMBIOS 2.3.1

- Compatible con Smart BIOS

CD de soport - Controladores, Utilerías, Software de Anti Virus (Versión

de prueba)

Característica - Sintonizador de ASRock OC (vea ATENCIÓN 7)

Única - Administrador de energía inteligente (vea ATENCIÓN 8)

- Instant Boot

- Amplificador Híbrido:

- Stepless control de frecuencia de CPU

(vea ATENCIÓN 9)

- ASRock U-COP (vea ATENCIÓN 10)

- Protección de Falla de Inicio (B.F.G..)

Monitor Hardware - Sensibilidad a la temperatura del procesador

- Sensibilidad a la temperatura de la placa madre

- Taquímetros de los ventiladores del procesador y del

procesador

- Taquímetros de los ventiladores del procesador y del chasis

- Ventilador silencioso para procesador

- Monitor de Voltaje: +12V, +5V, +3.3V, Vcore

5757

ASRock N73PV-S / N73V-S Motherboard

ADVERTENCIA

Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la

velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de

velocidad liberada o utilizando las herramientas de aumento de velocidad de otros

fabricantes. El aumento de la velocidad puede afectar a la estabilidad del sistema e,

incluso, dañar los componentes y dispositivos del sistema. Esta operación se debe

realizar bajo su propia responsabilidad y Ud. debe asumir los costos. No asumimos

ninguna responsabilidad por los posibles daños causados por el aumento de la velocidad

del reloj.

ATENCIÓN !

1. Por favor consulte página 39 del Manual del Usuario en el soporte

CD sobre la configuración de Hyper-Threading Technology.

2. Esta placa base admite la tecnología de aumento de velocidad liberada.

Por favor lea “Tecnología de Forzado de Reloj (Overclocking) no

relacionado” en la página 21 para obtener detalles.

3. Debido a las limitaciones del sistema, el tamaño real de la memoria debe

ser inferior a 4GB para que el sistema pueda funcionar bajo Windows

y Windows

Vista

. Para equipos con Windows

XP 64-bit y Windows

Vista

64-bit con CPU de 64-bit, no existe dicha limitación.

4. El tamaño de la memoria compartido máximo es definido por el

vendedor del chipset y está conforme al cambio. Por favor compruebe

el Web site de NVIDIA

para la información más última.

5. Antes de instalar el disco duro SATAII en el conector SATAII, por favor lea

la “Guía de Configuración de Disco Duro SATAII” en la página 24 para

ajustar su unidad de disco duro SATAII al modo SATAII. También puede

conectar el disco duro SATA al conector SATAII directamente.

6. Power Management para USB 2.0 funciona bien bajo Microsoft

Windows

Vista

64 bits / Vista

/ XP 64 bits / XP SP1; SP2.

7. Es una herramienta de overclocking de ASRock de usuario-fácil que

le permite a supervisar su sistema por la función de monitor de

hardware y overclock sus dispositivos de hardware para obtener el

mejor funcionamiento del sistema bajo el entorno de Windows

. Por

favor visite nuestro sitio web para los procedimientos de operación

de Sintonizador de ASRock OC.

Sitio web de ASRock: http://www.asrock.com

8. Contiene avanzado hardware y diseño de software de propietario.

Intelligent Energy Saver es una revolucionaria tecnología que

consigue ahorros de energía sin rival. En otras palabras, permite

alcanzar un nivel de ahorro de energía excepcional y mejorar la

EspañolEspañol

Español

OS - En conformidad con Microsoft

Windows

XP / XP 64 bits /

Vista

/ Vista

64 bits

Certificaciones - FCC, CE

* Para más información sobre los productos, por favor visite nuestro sitio web:

http://www.asrock.com

5858

ASRock N73PV-S / N73V-S Motherboard

EspañolEspañol

Español

Short Open

1.3 Setup de Jumpers1.3 Setup de Jumpers

1.3 Setup de Jumpers

La siguiente ilustración muestra setup de

Jumpers. Cuando el jumper cap está colocado

sobre los pins, el jumper está “SHORT”. Si

ningun jumper cap está colocado sobre los pins,

el jumper está “OPEN”. La ilustración muestra

un jumper de 3-pin cuyo pin1 y pin2 están

“SHORT” cuando el jumper cap está colocado

sobre estes 2 pins.

Jumper Setting Descripción

PS2_USB_PWR1 Ponga en cortocircuito pin 2,

(vea p.2/3, N. 1) pin 3 para habilitar +5VSB

(standby) para PS/2 o USB

wake up events.

Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la

fuente de electricidad.

Limpiar CMOS

(CLRCMOS1, jumper de 3 pins)

(vea p.2/3, N. 10)

Atención: CLRCMOS1 permite que Usted limpie los datos en CMOS. Los datos en

CMOS incluyen informaciones de la configuración del sistema, tales como

la contraseña del sistema, fecha, tiempo, y parámetros de la configuración

del sistema. Para limpiar y reconfigurar los parametros del sistema a la

configuración de la fábrica, por favor apague el computador y desconecte

Valor predeterminado Restablecimiento de

la CMOS

eficiencia energética sin sacrificar el rendimiento del procesador.

Visite nuestro sitio web para más información acerca del

funcionamiento de Intelligent Energy Saver.

Sitio web de ASRock: http://www.asrock.com

9. Aunque esta placa base ofrece un control complete, no es

recomendable forzar la velocidad. Las frecuencias de bus de la CPU

distintas a las recomendadas pueden causar inestabilidad en el

sistema o dañar la CPU.

10. Cuando la temperatura de CPU está sobre-elevada, el sistema va a

apagarse automaticamente. Antes de reanudar el sistema,

compruebe si el ventilador de la CPU de la placa base funciona

apropiadamente y desconecte el cable de alimentación, a

continuación, vuelva a conectarlo. Para mejorar la disipación de

calor, acuérdese de aplicar thermal grease entre el procesador y el

disipador de calor cuando usted instala el sistema de PC.

5959

ASRock N73PV-S / N73V-S Motherboard

1.4 Cabezales y Conectores en Placas1.4 Cabezales y Conectores en Placas

1.4 Cabezales y Conectores en Placas

Los conectores y cabezales en placa NO son puentes. NO coloque las

cubiertas de los puentes sobre estos cabezales y conectores. El colocar

cubiertas de puentes sobre los conectores y cabezales provocará un

daño permanente en la placa base.

Conector de disquetera

(33-pin FLOPPY1)

(vea p.2/3, N. 17)

Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que

el contacto 1 de la conexión.

IDE conector primario (Azul)

(39-pin IDE1, vea p.2/3, N. 7)

Atención: Consulte las instrucciones del distribuidor del dispositivo IDE para conocer

los detalles.

Conexiones de serie ATAII Estos cuatro conectores de la

(SATAII_1: vea p.2/3, N. 8) Serie ATA (SATAII) soportan

(SATAII_2: vea p.2/3, N. 13) HDDs SATA o SATAII para

(SATAII_3: vea p.2/3, N. 11) dispositivos de almacenamiento

(SATAII_4: vea p.2/3, N. 12) interno. La interfaz SATAII

actual permite una velocidad de

transferencia de 3.0 Gb/s.

la banda roja debe quedar en

el mismo lado que el contacto 1

Conector azul

a placa madre

Conector negro

a aparato IDE

Cable ATA 66/100/133 de conducción 80

SATAII_1 SATAII_3

SATAII_2 SATAII_4

EspañolEspañol

Español

el cable de la fuente de electricidad, utilice una cubierta de jumper para

aislar las agujas pin2 y pin3 en CLRCMOS1 durante 5 segundos. Por favor

acuérdase de quitar el jumper cap después de limpiar el COMS. Por favor

acuérdase de quitar el jumper cap después de limpiar el COMS. Si

necesita borrar la CMOS cuando acabe de finalizar la actualización de la

BIOS, debe arrancar primero el sistema y, a continuación, apagarlo antes de

realizar la acción de borrado de CMOS.

6060

ASRock N73PV-S / N73V-S Motherboard

EspañolEspañol

Español

Conectar a la fuente

de alimentación

Conectar a la conexión de

alimentación del disco

duro SATA

Cable de alimentación Conecte el extremo negro del

de serie ATA (SATA) cable de alimentación SATA en

(Opcional) la conexión de alimentación

de cada unidad. A continuación,

conecte el extremo blanco del

cable de alimentación SATA a

la conexión de alimentación de

la fuente de alimentación.

N73PV-S:

Cabezal USB 2.0 Además de cuatro puertos USB

(9-pin USB4_5) 2.0 predeterminados en el

(ver p.2, No. 26) panel de E/S, hay tres bases

de conexiones USB 2.0 en esta

placa base. Cada una de estas

bases de conexiones admite

(9-pin USB6_7) dos puertos USB 2.0.

(ver p.2, No. 25)

(9-pin USB8_9)

(ver p.2, No. 24)

Cable de datos de Ambos extremos del cable

serie ATA (SATA) pueden conectarse al disco

(Opcional) duro SATA / SATAII o la

conexión de la placa base.

N73V-S:

Cabezal USB 2.0 Además de cuatro puertos USB

(9-pin USB4_5) 2.0 predeterminados en el

(ver p.3, No. 25) panel de E/S, hay dos bases

de conexiones USB 2.0 en esta

placa base. Cada una de estas

bases de conexiones admite

(9-pin USB6_7) dos puertos USB 2.0.

(ver p.3, No. 24)

6161

ASRock N73PV-S / N73V-S Motherboard

EspañolEspañol

Español

Cabecera de puerto de impresora Esta es una interfaz de puerto

(LPT1 de 25 terminales) para cable de impresora que

(vea p.2/3, N. 16) permite conectar cómodamente

dispositivos de impresión.

Conector de audio interno Permite recepción de input

(4-pin CD1) audio de fuente sónica como CD-

(CD1: vea p. 2/3, N. 19) ROM, DVD-ROM, TV tuner, o

tarjeta MPEG.

CD1

1. El Audio de Alta Definición soporta la detección de conector, pero el cable

de panel en el chasis debe soportar HDA para operar correctamente. Por

favor, siga las instrucciones en nuestro manual y en el manual de chasis

para instalar su sistema.

2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del

panel frontal de la siguiente manera:

A. Conecte Mic_IN (MIC) a MIC2_L.

B. Conecte Audio_R (RIN) a OUT2_R y Audio_L (LIN) en OUT2_L.

C. Conecte Ground (GND) a Ground (GND).

D. MIC_RET y OUT_RET son sólo para el panel de sonido HD. No

necesitará conectarlos al panel de sonido AC’97.

E. Entre en la Utilidad de configuración del BIOS Entre en Configuración

avanzada y, a continuación, seleccione Configuración del conjunto de

chips. En el panel de control frontal cambie la opción [Automático] a

[Habilitado].

F. Entre en el sistema Windows. Haga clic en el icono de la barra de

tareas situada en la parte inferior derecha para entrar en el

Administrador de audio HD Realtek.

Para Windows

XP / XP 64-bit OS:

Haga clic en “E/S de audio”, seleccione “Configuración de conectores”

, elija “Deshabilitar la detección del conector del panel frontal” y

guarde el cambio haciendo clic en “Aceptar”.

Para Windows

Vista

/ Vista

64-bit OS:

Haga el clic el icono de la “Carpeta” de derecho-superior , eliga

“Inhabilitable la detección del gato del panel delantero” y ahorre el

cambio por chascando “OK”.

Conector de audio de Este es una interface para

panel frontal cable de audio de panel frontal

(9-pin HD_AUDIO1) que permite conexión y control

(vea p.2/3, N. 18) conveniente de apparatos de

Audio.

6262

ASRock N73PV-S / N73V-S Motherboard

Conector del ventilador Conecte el cable del ventilador

del chasis del chasis a este conector y

(3-pin CHA_FAN1) haga coincidir el cable negro

(vea p.2/3, N. 9) con el conector de tierra.

Conector del ventilador Conecte el cable del ventilador

de la CPU de la CPU a este conector y

(4-pin CPU_FAN1) haga coincidir el cable negro

(vea p.2/3, N. 4) con el conector de tierra.

Aunque esta placa base proporciona compatibilidad para un ventilador

(silencioso) de procesador de 4 contactos, el ventilador de procesador de 3

contactos seguirá funcionando correctamente incluso sin la función de control

de velocidad del ventilador. Si pretende enchufar el ventilador de procesador

de 3 contactos en el conector del ventilador de procesador de esta placa base,

conéctelo al contacto 1-3.

Contacto 1-3 conectado

Instalación del ventilador de 3 contactos

Cabezal de alimentación ATX Conecte la fuente de

(24-pin ATXPWR1) alimentación ATX a su cabezal.

(vea p.2/3, N. 6)

Instalación de una Fuente de Alimentación ATX de 20 Pins

A pesar de que esta placa base incluye in conector de

alimentación ATX de 24 pins, ésta puede funcionar incluso

si utiliza una fuente de alimentación ATX de 20 pins tradicional.

Para usar una fuente de alimentación ATX de 20 pins, por favor,

conecte su fuente de alimentación usando los Pins 1 y 13.

Cabezal de panel de sistema Este cabezar acomoda varias

(9-pin PANEL1) dunciones de panel frontal de

(vea p.2/3, N. 14) sistema.

Cabezal del altavoz del chasis Conecte el altavoz del chasis a

(4-pin SPEAKER1) su cabezal.

(vea p.2/3, N. 15)

EspañolEspañol

Español

6363

ASRock N73PV-S / N73V-S Motherboard

ctos

Conector de ATX 12V power Tenga en cuenta que es

(4-pin ATX12V1) necesario conectar este

(ver p.2, No. 27o p.3, No. 26) conector a una toma de corriente

con el enchufe ATX 12V, de

modo que proporcione suficiente

electricidad. De lo contrario no

se podrá encender.

2. BIOS Información2. BIOS Información

2. BIOS Información

La utilidad de configuración de la BIOS se almacena en el chip BIOS FWH. Cuando

se arranca el equipo, pulse <F2> durante la prueba automática de encendido

(POST) para entrar en la Utilidad de la configuración de la BIOS, de lo contrario,

POST continúa con sus rutinas de prueba. Si desea entrar en la Utilidad de

configuración de la BIOS después de POST, reanude el sistema pulsando <Ctl>+

<Alt>+<Supr> o pulsando el botón de restauración situado en el chasis del

sistema. Para obtener información detalladas sobre la Utilidad de configuración de

la BIOS, consulte el Manual del usuario (archivo PDF), que se encuentra en el CD

de soporte.

3.Información de Software Support CD3.Información de Software Support CD

3.Información de Software Support CD

Esta placa-base soporta diversos tipos de sistema operativo Windows

: XP / XP 64

bits / Vista

/ Vista

64 bits El CD de instalación que acompaña la placa-base trae

todos los drivers y programas utilitarios para instalar y configurar la placa-base.

Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú

Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el

Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo

“ASSETUP.EXE” para iniciar la instalación.

EspañolEspañol

Español

7474

ASRock N73PV-S / N73V-S Motherboard

oror

tuguêstuguês

tuguês

1. Introdução1. Introdução

1. Introdução

Gratos por comprar nossa placa–mãe N73PV-S / N73V-S, um produto confiável feito

com ASRock um estrito controle de qualidade consistente. Com um excelente

desempenho, essa placa é dotada de um projeto robusto que atende a ASRock de

compromisso com a qualidade e durabilidade.

Este Guia de Instalação Rápida apresenta a placa-mãe e o guia de instalação

passo a passo. Mais informações detalhadas sobre a placa-mãe podem ser

encontradas no manual do usuário do CD de suporte.

Porque as especificações da placa mãe e o software de BIOS

poderiam ser atualizados, o conteúdo deste manual pode ser

cambiado sem aviso. Em caso de qualquer modificação deste

manual, a versão atualizada estará disponível no website de ASRock

sem prévio aviso. Pode também encontrar as listas das mais recentes

placas VGA e das CPUs suportadas no site da web da ASRock.

Website de ASRock http://www.asrock.com

Se precisar de apoio técnico em relação a este placa-mãe, por favor

visite o nosso sítio da internet para informação específica acerca do

modelo que está a utilizar.

www.asrock.com/support/index.asp

1.1 Este pacote contém1.1 Este pacote contém

1.1 Este pacote contém

Placa-mãe ASRock N73PV-S / N73V-S

(Formato Micro ATX: 9,6 pol. x 7,0 pol., 24,4 cm x 17,8 cm)

Guia de instalação rápida da ASRock N73PV-S / N73V-S

CD de suporte da placa ASRock N73PV-S / N73V-S

Um cabo-fita IDE Ultra ATA 66/100/133 de 80 condutores (Opcional)

Um cabo de dados ATA Serial (SATA) (Opcional)

Um cabo de alimentação da unidade de disco rígido ATA Serial (SATA) (Opcional)

Uma proteção I/O

7575

ASRock N73PV-S / N73V-S Motherboard

1.2 Especificações1.2 Especificações

1.2 Especificações

Plataforma - Formato Micro ATX: 9,6 pol. x 7,0 pol., 24,4 cm x 17,8 cm

CPU - Socket Intel

Core

2 Extreme / Core

2 Quad / Core

Duo / Pentium

Dual Core / Celeron

775 pinos com suporte para o processador Quad Core Yorkfield

e Dual Core Wolfdale

- FSB1333/1066/800/533MHz

- Suporta a tecnologia Hyper-Threading (veja o AVISO 1)

- Suporta a tecnologia Untied Overclocking (veja o AVISO 2)

- Suporta a CPU EM64T

Chipsets - NVIDIA

GeForce 7100 / nForce 630i (N73PV-S)

- NVIDIA

GeForce 7050 / nForce 610i (N73V-S)

Memória - 2 x slots de DDR2 DIMM

- Suporte para memória não intermédia DDR2 800/667/

533, não ECC

- Capacidade máxima de memória do sistema: 16GB

(veja o AVISO 3)

Slots de Expansão - 1 x slots de PCI Express x16

- 1 x slots de PCI Express x1

- 2 x slots de PCI

VGA integrado - Integrado NVIDIA

GeForce7100 (N73PV-S)

- Integrado NVIDIA

GeForce7050 (N73V-S)

- VGA DX9.0, Pixel Shader 3.0

- Memória partilhada máxima 256MB (veja o AVISO 4)

Áudio - Áudio de alta definição de canal 5.1 através do

Windows

Vista

(Codec de áudio ALC662)

LAN - Realtek PHY RTL8201EL

- Velocidade: 10 / 100 Ethernet

- Suporta Wake-On-LAN

Entrada/Saída I/O Panel

pelo painel - 1 x porta para mouse PS/2

traseiro - 1 x porta para teclado PS/2

- 1 x porta COM1

- 1 x porta VGA

- 4 x portas USB 2.0 padrão

- 1 x porta LAN RJ-45 com LED (LED ACT/LIG e LED

VELOCIDADE)

- HD Áudio Jack: Entrada de linha / Altifalante frontal /

Microfone

Conectores - 4 x conectores SATAII, suporte a taxa de transferência de

dados de até 3,0 Gb/s, suporte RAID (RAID 0, RAID 1,

oror

tuguêstuguês

tuguês

7676

ASRock N73PV-S / N73V-S Motherboard

oror

tuguêstuguês

tuguês

RAID 0+1, JBOD e RAID 5), NCQ, AHCI e “conexão a

quente” (veja o AVISO 5)

* As funções RAID 0+1 e RAID 5 são apenas para o modelo

N73PV-S

- 1 x conectores ATA133 IDE (suporta até 2 dispositivos IDE)

- 1 x porta para disquete

- 1 x Conector de Porta de Impressão

- Conector do ventilador da CPU/chassis

- Conector de força do ATX de 24 pinos

- Conector ATX 12 V de 4 pinos

- Conectores internos de áudio

- Conector Áudio do painel frontal

- 3 x cabezal USB 2.0 (suportar 6 portas USB 2.0 adicionais)

(N73PV-S) (veja o AVISO 6)

- 2 x cabezal USB 2.0 (suportar 4 portas USB 2.0 adicionais)

(N73V-S) (veja o AVISO 6)

BIOS - 4Mb BIOS AMI

- BIOS AMI

- Suporta dispositivos “Plug and Play”

- ACPI 1.1 atendendo a eventos de “wake up”

- Suporta dispositivos sem jumper

- Suporte para SMBIOS 2.3.1

- Suporte para Smart BIOS

CD de suporte - Controladores, utilitários, software antivírus

(Experimentacao Versao)

Funcionalidade - Sintonizador ASRock OC (veja o AVISO 7)

Única - Intelligent Energy Saver (veja o AVISO 8)

- Instant Boot

- Booster híbrido:

- Frequência da CPU com controle contínuo (veja o AVISO 9)

- ASRock U-COP (veja o AVISO 10)

- B.F.G. (Boot Failure Guard)

Monitor do HW - Sensores de temperature do procesador

- Medição de temperatura da placa-mãe

- Tacômetros de ventilador do Processador

- Tacômetros de ventilador do chassis

- Ventoinha silenciosa para a CPU

- Monitoramento de voltagem : +12 V, +5 V, +3.3 V, Vcore

Sistema - Microsoft

Windows

XP / XP de 64 bits / Vista

Operacional Vista

de 64 bits

Certificações - FCC, CE

* Para informações mais detalhadas por favor visite o nosso sítio Web:

http://www.asrock.com

7777

ASRock N73PV-S / N73V-S Motherboard

AVISO!

1. Sobre a configuração da “Tecnologia Hyper Threading”, consulte a

página 39 do Manual do Usuário no CD de suporte. (Somente

inglês)

2. Esta placa principal suporta a tecnologia Untied Overclocking.

Consulte a secção “Tecnologia Untied Overclocking” na página 21

para mais informações.

3. Devido às limitações do sistema operativo, o tamanho real da memória

pode ser inferior a 4 GB uma vez que uma parte desta está reservada

para utilização pelo sistema operativo no âmbito do Windows

XP e do

Windows

Vista

. No caso da CPU de 64 bits do Windows

XP de 64

bits e do Windows

Vista

de 64 bits, esta limitação não existe.

4. O máximo tamanho de memória compartilhada é definido por

vendedor de chipset e é sujeito a mudar. Verifique o NVIDIA

website

para a última informação.

5. Antes de instalar o disco duro SATAII no conector SATAII, por favor leia

o “Guia de Instalação do Disco duro SATAII” na página 24 do Manual

do Usuário no CD de suporte, para definir a sua unidade de disco

duro SATAII com o modo SATAII. Também pode ligar directamente o

disco duro SATA ao conector SATAII.

6. Power Management para USB 2.0 funciona bem embaixo de

Microsoft

Windows

Vista

de 64 bits / Vista

/ XP de 64 bits / XP

SP1; SP2.

7. É uma ferramenta de overclocking da ASRock fácil de utilizar que lhe

permite vigiar i seu sistema via a função de monitorização de

hardware e proceder ao overclock dos dispositivos de hardware para

obter o melhor desempenho em ambiente Windows

. Por favor visite

o nosso sítio Web para conhecer os procedimentos de

funcionamento do Sintonizador ASRock OC.

Sítio Web da ASRock: http://www.asrock.com

8. Com um hardware de propriedades e concepção de software

avançadas, a Intelligent Energy Saver é uma tecnologia

revolucionária que proporciona poupanças de energia inéditas. Por

outras palavras, pode providenciar uma excepcional poupança de

energia e melhorar a eficiência energética sem sacrificar o

desempenho. Por favor visite o nosso sítio Web para conhecer os

procedimentos de funcionamento da Intelligent Energy Saver. Sítio

Web da ASRock: http://www.asrock.com

AVISO

Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente

no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied

Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking

pode afectar a estabilidade do seu sistema ou até mesmo causar danos ao nível dos

componentes e dispositivos que integram o sistema. Esta operação é da total

responsabilidade do utilizador. Não nos responsabilizamos pelos possíveis danos

resultantes do overclocking.

oror

tuguêstuguês

tuguês

7878

ASRock N73PV-S / N73V-S Motherboard

oror

tuguêstuguês

tuguês

1.3 Configuração dos Jumpers1.3 Configuração dos Jumpers

1.3 Configuração dos Jumpers

A ilustração mostra como os jumpers são

configurados. Quando há uma capa de

jumpers sobre os pinos, diz–se que o jumper

está “curto”. Não havendo capa sobre os

pinos, o jumper está “aberto”. A ilustração

mostra um jumper de 3 pinos em que os pinos

1 e 2 están “curtos” quando a capa de jumper

estiver colocada sobre esses 2 pinos.

Jumper Configuração

PS2_USB_PW1 Pin2, Pin3 curtos para

(veja a folha 2/3, No. 1) habilitar +5VSB (stand by)

para PS/2 ou eventos de

wake up na USB.

Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais.

Restaurar CMOS

(CLRCMOS1, jumper de 3 pinos)

(veja a folha 2/3, No. 10)

Nota: CLRCMOS1 permite você limpar os dados em CMOS. Os dados em CMOS

incluem informações da configuração do sistema como: por exemplo a senha

do sistema, data, tempo, e os parámetros da configuração do sistema. Para

limpar e reconfigurar os parámetros do sistema a configuração inicial da

fábrica, por favor desligue o cabo de força, ponha em curto–circuito os pin 2

e pin 3 de CLRCMOS1 por mais de 5 segundos para limpar o CMOS usando um

jumper. Por favor lembrese de remover o jumper depois de limpar o COMS. Se

precisar limpar o CMOS ao concluir a atualização do BIOS, deverá reiniciar o

sistema primeiro e, em seguida, desligá-lo antes de executar a ação de limpeza

o CMOS.

Short Open

Configuração-padrão Limpar o CMOS

9. Apesar de esta placa-mãe oferecer controle continuamente variável,

não se recomenda efetuar over-clock. Freqüências de barramento

diferentes das recomendadas para a CPU podem provocar

instabilidade do sistema ou danos à CPU.

10. Assim que se detecta um superaquecimento na CPU, o sistema se

desliga automaticamente e o botão de energia do chassis fica

inativo.Cheque o ventilador da CPU na placa–mãe, para verificar se

está funcionando corretamente antes de religar o sistema. Para

melhorar a dissipação de calor, lembre-se de aplicar o material de

interface térmica entre o processador e o dissipador de calor.

7979

ASRock N73PV-S / N73V-S Motherboard

1.4 Conectores1.4 Conectores

1.4 Conectores

Os conectores NÃO SÃO jumpers. NÃO coloque capas de jumper sobre

estes conectores. A colocação de pontos de jumper sobre os conectores

causará danos irreversíveis à placa-mãe.

Conector Figura Descrição

Conector FDD

(FLOPPY 1, 33 pinos)

(veja a folha 2/3, No. 17)

Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao

lado Pino 1 do conector.

Conector primário (Azul)

(IDE1 de 39 pinos, veja a folha 2/3, No. 7)

Ligue esta ponta (azul) Ligue esta ponta (preta)

à placa–mãe aos dispositivos IDE

Cabo ATA 66/100/133 de 80 condutores

Nota: Para detalhes, consulte as instruções do fornecedor do seu dispositivo

IDE.

Conectores ATAII Serial Estes quatro conectores Serial

(SATAII_1: veja a folha 2/3, No. 8) ATA (SATAII) suportam

(SATAII_2: veja a folha 2/3, No. 13) unidades de disco rígido SATA

(SATAII_3: veja a folha 2/3, No. 11) ou SATAII como dispositivos de

(SATAII_4: veja a folha 2/3, No. 12) armazenamento internos. A

atual interface SATAII permite

uma taxa de transferência de

dados de até 3.0 Gb/s.

Cabo de dados Tanto a saída do cabo de Serial

ATA (SATA) dados SATA pode ser

(opcional) conectado ao disco rígido

SATA / SATAII quanto o

conector SATAII na placa mãe.

o lado com listras vermelhas para o Pino 1

SATAII_1 SATAII_3

SATAII_2 SATAII_4

oror

tuguêstuguês

tuguês

8080

ASRock N73PV-S / N73V-S Motherboard

oror

tuguêstuguês

tuguês

Cabo de Alimentação Conecte a saída de cor preta

ATA (SATA) do cabo de alimentação SATA

(opcional) ao conector de alimentação

em cada acionador. Em

seguida, conecte a saída

branca do cabo de alimentação

SATA ao conector de

alimentação da fonte.

N73PV-S:

Cabezal USB 2.0 Além das quatro portas USB

(USB4_5 de 9 pinos) 2.0 por defeito no painel de

(veja a folha 2, No. 26) entrada/saída, há tres

ligações USB 2.0 nesta placa-

mãe. Cada ligação USB 2.0

pode suportar duas portas USB

(USB6_7 de 9 pinos) 2.0.

(veja a folha 2, No. 25)

(USB8_9 de 9 pinos)

(veja a folha 2, No. 24)

Ligue no conector de

alimentação SATA HDD

Conecte a fonte

N73V-S:

Cabezal USB 2.0 Além das quatro portas USB

(USB4_5 de 9 pinos) 2.0 por defeito no painel de

(veja a folha 3, No. 25) entrada/saída, há duas

ligações USB 2.0 nesta placa-

mãe. Cada ligação USB 2.0

pode suportar duas portas USB

(USB6_7 de 9 pinos) 2.0.

(veja a folha 3, No. 24)

8181

ASRock N73PV-S / N73V-S Motherboard

Conector de Porta de Impressão Esta é uma interface para um

(LPT1 de 25 pinos) cabo de porta de impressão

(veja a folha 2/3, No. 16) que permite uma ligação

prática para dispositivos de

impressão.

Conectores internos de áudio Estes conectores permitem

(CD1 de 4 pinos) que se receba entrada de

(CD1: veja a floha 2/3, No. 19) áudio em estéreo de fontes

de áudio como CD-ROM,

DVD-ROM, placa sintonizadora

de TV ou placa MPEG.

CD1

oror

tuguêstuguês

tuguês

Conector Áudio do painel Esta é uma interface para o

frontal cabo de áudio no painel frontal,

(HD_AUDIO1 de 9 pinos) que permite uma conexão e

(veja a folha 2/3, No. 18) controle convenientes dos

dispositivos de áudio.

1. Áudio de elevada definição que suporta a sensibilidade da tomada, mas

o fio do painel existente no chassis tem de suportar HDA para funcionar

correctamente. Siga s instruções que aparecem no manual e no manual

do chassis para instalar o sistema.

2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do

painel frontal, como a figura abaixo mostra:

A. Ligue o Mic_IN (MIC) ao MIC2_L.

B. Ligue o Audio_R (RIN) ao OUT2_R e o Audio_L (LIN) ao OUT2_L.

C. Ligue o Ground (GND) ao Ground (GND).

D. MIC_RET e OUT_RET são apenas para o painel de áudio HD. Não

necessita de os ligar para o painel de áudio AC’97.

E. Entre no utilitário de configuração do BIOS. Vá até à opção Definições

avançadas e escolha Configuração do chipset. Defina a opção Controlo

do painel frontal de [Automático] para [Activado].

F. Entre no sistema Windows. Clique no ícone existente na barra de

tarefas no canto inferior direito para aceder ao Realtek HD Audio

Manager.

Para Windows

XP / XP 64-bit OS:

Clique em “Entrada/Saída de áudio”, seleccione “Definições do

conector” , escolha a opção “Desactivar detecção da tomada do

painel frontal” e guarde a alteração clicando em “OK”.

8282

ASRock N73PV-S / N73V-S Motherboard

Apesar de esta placa-mãe possuir 4 apoios para uma ventoinha de CPU

(Ventoinha silenciosa), uma ventoinha de 3 pinos para CPU poderá funcionar

mesmo sem a função de controlo de velocidade da ventoinha. Se pretender

ligar uma ventoinha de 3 pinos para CPU ao conector de ventoinha do CPU

nesta placa-mãe, por favor, ligue-a aos pinos 1-3.

Instalação de Ventoinha de 3 pinos

Pinos 1-3 ligados

Conector do ventilador do Ligue o cabo do ventilador neste

chassis conector, coincidindo o fio preto

(CHA_FAN1 de 3 pinos) com o pino de aterramento.

(veja a folha 2/3, No. 9)

Conector do ventilador da Ligue o cabo do ventilador da

CPU CPU, coincidindo o fio preto com

(CPU_FAN1 de 4 pinos) o pino de aterramento.

(veja a folha 2/3, No. 4)

Conector de força do ATX Ligue a fonte de alimentação

(ATXPWR1 de 24 pinos) ATX neste conector.

(veja a folha 2/3, No. 6)

Conector do sistema no Este conector acomoda

painel diversas funções de

(PANEL1 de 9 pinos) sistema no painel frontal.

(veja a folha 2/3, No. 14)

Conector do alto-falante do chassi Ligue o alto-falante do chassi

(SPEAKER1 de 4 pinos) neste conector.

(veja a folha 2/3, No. 15)

Para Windows

Vista

/ Vista

64-bit OS:

Clique o direito-cima “Folder” icone , escolhe “Deteção de

valete de painel dianteiro” e guarda a mudança por clicar “OK”.

oror

tuguêstuguês

tuguês

8383

ASRock N73PV-S / N73V-S Motherboard

nos

Conector ATX 12 V Note que é necessário ligar

(ATX12V1 de 4 pinos ) uma fonte de alimentação com

(veja a folha 2, No. 27 ou folha 3, No. 26) conector ATX 12V neste

conector para fornecer

alimentação suficiente. Do

contrário, haverá falhas de

funcionamento.

Embora esta placa-mãe providencie um conector de energia

ATX de 24 pinos, pode apesar disso funcionar com a adapta-ção

de uma fonte de energia tradicional de 20 pinos. Para usar a fonte

de alimentação de 29 pinos, por favor ligue a sua fonte de

alimentação com o Pino 1 e o Pino 13.

Instalação da Fonte de alimentação ATX de 20 Pinos

oror

tuguêstuguês

tuguês

2. Informações da BIOS2. Informações da BIOS

2. Informações da BIOS

O Utilitário de Configuração do BIOS está armazenado no chip FWH do BIOS. Ao

iniciar o computador, pressione <F2> durante o Autoteste de iniciação (POST)

para acessar o Utilitário de Configuração do BIOS; caso contrário, o POST

continuará com as rotinas de teste. Se desejar acessar o Utilitário de

Configuração do BIOS depois do POST, reinicie o sistema pressionando <Ctl> +

<Alt> + <Del>, ou pressionando o botão de reinício no chassi do sistema. Para as

informações detalhadas sobre o Utilitário de Configuração do BIOS, consulte o

Manual do Usuário (arquivo PDF) no CD de suporte.

3. Informações do CD de Suporte3. Informações do CD de Suporte

3. Informações do CD de Suporte

Esta placa Mãe suporta vários sistemas operacionais: Microsoft

Windows

: XP / XP

de 64 bits / Vista

/ Vista

de 64 bits. O CD de instalação que acompanha a placa

Mãe contem: drivers e utilitários necessários para um melhor desempenho da placa

Mãe. Para começar a usar o CD de instalação, introduza o CD na leitora de CD-ROM

do computador. Automaticamente iniciará o menu principal, casa o AUTORUN esteja

ativado. Se o menu principal não aparecer automaticamente, explore o CD e execute

o “ASSETUP.EXE” localizado na pasta BIN.

8484

ASRock N73PV-S / N73V-S Motherboard

8585

ASRock N73PV-S / N73V-S Motherboard

8686

ASRock N73PV-S / N73V-S Motherboard

8787

ASRock N73PV-S / N73V-S Motherboard

“ ”

® ®

“

8888

ASRock N73PV-S / N73V-S Motherboard

“ ”

8989

ASRock N73PV-S / N73V-S Motherboard

SATAII_1 SATAII_3

SATAII_2 SATAII_4

9090

ASRock N73PV-S / N73V-S Motherboard

CD1

9191

ASRock N73PV-S / N73V-S Motherboard

9292

ASRock N73PV-S / N73V-S Motherboard

9393

ASRock N73PV-S / N73V-S Motherboard

“ ”

\ \

9494

ASRock N73PV-S / N73V-S Motherboard

9595

ASRock N73PV-S / N73V-S Motherboard

® ®

9696

ASRock N73PV-S / N73V-S Motherboard

9797

ASRock N73PV-S / N73V-S Motherboard

® ®

9898

ASRock N73PV-S / N73V-S Motherboard

9999

ASRock N73PV-S / N73V-S Motherboard

SATAII_1 SATAII_3

SATAII_2 SATAII_4

100100

100

ASRock N73PV-S / N73V-S Motherboard

CD1

101101

101

ASRock N73PV-S / N73V-S Motherboard

102102

102

ASRock N73PV-S / N73V-S Motherboard

103103

103

ASRock N73PV-S / N73V-S Motherboard

® ®

104104

104

ASRock N73PV-S / N73V-S Motherboard

X O O O O O

105105

105

ASRock N73PV-S / N73V-S Motherboard

106106

106

ASRock N73PV-S / N73V-S Motherboard

® ®

107107

107

ASRock N73PV-S / N73V-S Motherboard

® ®

108108

108

ASRock N73PV-S / N73V-S Motherboard

“ ”

® ®

® ® TM

109109

109

ASRock N73PV-S / N73V-S Motherboard

110110

110

ASRock N73PV-S / N73V-S Motherboard

SATAII_1 SATAII_3

SATAII_2 SATAII_4

111111

111

ASRock N73PV-S / N73V-S Motherboard

CD1

112112

112

ASRock N73PV-S / N73V-S Motherboard

113113

113

ASRock N73PV-S / N73V-S Motherboard

114114

114

ASRock N73PV-S / N73V-S Motherboard

® ® TM

115115

115

ASRock N73PV-S / N73V-S Motherboard

NOTE.

If you install the VGA driver (version 163.91) on your system, but the window is not in

full screen mode, please follow below steps to adjust the window.

1. Right-click the desktop and select NVIDIA Control Panel.

2. Click Display and click Change Flat Panel Scaling.

3. In the option When using a resolution lower than my display’s native

resolution, please select Use my display’s built-in scaling.

Transcripción de documentos

Copyright Notice: No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Disclaimer: Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CALIFORNIA, USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations English passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance. “Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate” ASRock Website: http://www.asrock.com Published December 2008 Copyright©2008 ASRock INC. All rights reserved. 1 ASRock N73PV-S / N73V-S Motherboard Motherboard LLayout ayout (N73PV -S) (N73PV-S) 1 2 3 4 5 English 6 7 8 9 10 11 12 13 14 PS2_USB_PWR1 Jumper 775-Pin CPU Socket NVIDIA GeForce 7100 / nForce 630i Chipset CPU Fan Connector (CPU_FAN1) 2 x 240-pin DDR2 DIMM Slots (DDRII_1, DDRII_2; Yellow) ATX Power Connector (ATXPWR1) IDE1 Connector (IDE1, Blue) Primary SATAII Connector (SATAII_1; Red) Chassis Fan Connector (CHA_FAN1) Clear CMOS Jumper (CLRCMOS1) Third SATAII Connector (SATAII_3; Red) Fourth SATAII Connector (SATAII_4; Red) Secondary SATAII Connector (SATAII_2; Red) System Panel Header (PANEL1, Orange) 15 16 17 18 19 20 21 22 23 24 25 26 27 Chassis Speaker Header (SPEAKER 1, Purple) Print Port Header (LPT1, Purple) Floppy Connector (FLOPPY1) Front Panel Audio Header (HD_AUDIO1, Lime) Internal Audio Connector: CD1 (Black) PCI Slots (PCI1- 2) PCI Express x16 Slot (PCIE2) PCI Express x1 Slot (PCIE1) BIOS SPI Chip USB 2.0 Header (USB8_9, Blue) USB 2.0 Header (USB6_7, Blue) USB 2.0 Header (USB4_5, Blue) ATX 12V Connector (ATX12V1) 2 ASRock N73PV-S / N73V-S Motherboard Motherboard LLayout ayout (N73V -S) (N73V-S) 6 7 8 9 10 11 12 13 14 PS2_USB_PWR1 Jumper 775-Pin CPU Socket NVIDIA GeForce 7050 / nForce 610i Chipset CPU Fan Connector (CPU_FAN1) 2 x 240-pin DDR2 DIMM Slots (DDRII_1, DDRII_2; Yellow) ATX Power Connector (ATXPWR1) IDE1 Connector (IDE1, Blue) Primary SATAII Connector (SATAII_1; Red) Chassis Fan Connector (CHA_FAN1) Clear CMOS Jumper (CLRCMOS1) Third SATAII Connector (SATAII_3; Red) Fourth SATAII Connector (SATAII_4; Red) Secondary SATAII Connector (SATAII_2; Red) System Panel Header (PANEL1, Orange) 15 16 17 18 19 20 21 22 23 24 25 26 Chassis Speaker Header (SPEAKER 1, Purple) Print Port Header (LPT1, Purple) Floppy Connector (FLOPPY1) Front Panel Audio Header (HD_AUDIO1, Lime) Internal Audio Connector: CD1 (Black) PCI Slots (PCI1- 2) PCI Express x16 Slot (PCIE2) PCI Express x1 Slot (PCIE1) BIOS SPI Chip USB 2.0 Header (USB6_7, Blue) USB 2.0 Header (USB4_5, Blue) ATX 12V Connector (ATX12V1) English 1 2 3 4 5 3 ASRock N73PV-S / N73V-S Motherboard I/O PPanel anel 1 2 3 4 5 PS/2 Mouse Port (Green) USB 2.0 Ports (USB23) RJ-45 Port Line In (Light Blue) Line Out (Lime) 6 7 8 9 10 Microphone (Pink) USB 2.0 Ports (USB01) VGA Port COM Port PS/2 Keyboard Port (Purple) * To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming. For Windows® XP: After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or “4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then reboot your system. For Windows® VistaTM: After restarting your computer, please double-click “Realtek HD Audio Manager” on the system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device advanced settings”, choose “Make front and rear output devices playbacks two different audio streams simultaneously”, and click “ok”. Then reboot your system. English 4 ASRock N73PV-S / N73V-S Motherboard 1. Introduction Thank you for purchasing ASRock N73PV-S / N73V-S motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. www.asrock.com/support/index.asp 1.1 PPack ack age Contents ackage English ASRock N73PV-S / N73V-S Motherboard (Micro ATX Form Factor: 9.6-in x 7.0-in, 24.4 cm x 17.8 cm) ASRock N73PV-S / N73V-S Quick Installation Guide ASRock N73PV-S / N73V-S Support CD One 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable (Optional) One Serial ATA (SATA) Data Cable (Optional) One Serial ATA (SATA) HDD Power Cable (Optional) One I/O Panel Shield 5 ASRock N73PV-S / N73V-S Motherboard 1.2 Specifications Platform CPU Chipset Memory Expansion Slot Graphics Audio LAN Rear Panel I/O English Connector - Micro ATX Form Factor: 9.6-in x 7.0-in, 24.4 cm x 17.8 cm - LGA 775 for Intel® CoreTM 2 Extreme / CoreTM 2 Quad / CoreTM 2 Duo / Pentium® Dual Core / Celeron® Dual Core / Celeron®, supporting Quad Core Yorkfield and Dual Core Wolfdale processors - FSB1333/1066/800/533MHz - Supports Hyper-Threading Technology (see CAUTION 1) - Supports Untied Overclocking Technology (see CAUTION 2) - Supports EM64T CPU - NVIDIA® GeForce 7100 / nForce 630i (N73PV-S) - NVIDIA® GeForce 7050 / nForce 610i (N73V-S) - 2 x DDR2 DIMM slots - Support DDR2 800/667/533 non-ECC, un-buffered memory - Max. capacity of system memory: 16GB (see CAUTION 3) - 1 x PCI Express x16 slot - 1 x PCI Express x1 slot - 2 x PCI slots - Integrated NVIDIA® GeForce 7100 (N73PV-S) - Integrated NVIDIA® GeForce 7050 (N73V-S) - DX9.0 VGA, Pixel Shader 3.0 - Max. shared memory 256MB (see CAUTION 4) - 5.1 CH Windows® VistaTM Premium Level HD Audio (ALC662 Audio Codec) - Realtek PHY RTL8201EL - Speed: 10/100 Ethernet - Supports Wake-On-LAN I/O Panel - 1 x PS/2 Mouse Port - 1 x PS/2 Keyboard Port - 1 x Serial Port: COM1 - 1 x VGA Port - 4 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Jack: Line in / Front Speaker / Microphone - 4 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 0+1, JBOD and RAID 5), NCQ, AHCI and “Hot Plug” functions (see CAUTION 5) * RAID 0+1 and RAID 5 functions are for N73PV-S only - 1 x ATA133 IDE connector (supports 2 x IDE devices) 6 ASRock N73PV-S / N73V-S Motherboard Support CD Unique Feature Hardware Monitor OS Certifications English BIOS Feature - 1 x Floppy connector - 1 x Print port header - CPU/Chassis FAN connector - 24 pin ATX power connector - 4 pin 12V power connector - CD in header - Front panel audio connector - 3 x USB 2.0 headers (support 6 USB 2.0 ports) (N73PV-S) (see CAUTION 6) - 2 x USB 2.0 headers (support 4 USB 2.0 ports) (N73V-S) (see CAUTION 6) - 4Mb AMI BIOS - AMI Legal BIOS - Supports “Plug and Play” - ACPI 1.1 Compliance Wake Up Events - Supports jumperfree - SMBIOS 2.3.1 Support - Supports Smart BIOS - Drivers, Utilities, AntiVirus Software (Trial Version) - ASRock OC Tuner (see CAUTION 7) - Intelligent Energy Saver (see CAUTION 8) - Instant Boot - Hybrid Booster: - CPU Frequency Stepless Control (see CAUTION 9) - ASRock U-COP (see CAUTION 10) - Boot Failure Guard (B.F.G.) - CPU Temperature Sensing - Chassis Temperature Sensing - CPU Fan Tachometer - Chassis Fan Tachometer - CPU Quiet Fan - Voltage Monitoring: +12V, +5V, +3.3V, Vcore - Microsoft® Windows® XP / XP 64-bit / VistaTM / VistaTM 64-bit compliant - FCC, CE * For detailed product information, please visit our website: http://www.asrock.com WARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the third-party overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking. 7 ASRock N73PV-S / N73V-S Motherboard CAUTION! 1. English About the setting of “Hyper Threading Technology”, please check page 39 of “User Manual“ in the support CD. 2. This motherboard supports Untied Overclocking Technology. Please read “Untied Overclocking Technology” on page 21 for details. 3. Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® XP and Windows® VistaTM. For Windows® XP 64-bit and Windows® VistaTM 64-bit with 64-bit CPU, there is no such limitation. 4. The maximum shared memory size is defined by the chipset vendor and is subject to change. Please check NVIDIA® website for the latest information. 5. Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 24 of “User Manual“ in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly. 6. Power Management for USB 2.0 works fine under Microsoft® Windows® VistaTM 64-bit / VistaTM / XP 64-bit / XP SP1 or SP2. 7. It is a user-friendly ASRock overclocking tool which allows you to surveil your system by hardware monitor function and overclock your hardware devices to get the best system performance under Windows ® environment. Please visit our website for the operation procedures of ASRock OC Tuner. ASRock website: http://www.asrock.com 8. Featuring an advanced proprietary hardware and software design, Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings. In other words, it is able to provide exceptional power saving and improve power efficiency without sacrificing computing performance. Please visit our website for the operation procedures of Intelligent Energy Saver. ASRock website: http://www.asrock.com 9. Although this motherboard offers stepless control, it is not recommended to perform over-clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU. 10. While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. 8 ASRock N73PV-S / N73V-S Motherboard 2. Installation Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. 3. Hold components by the edges and do not touch the ICs. 4. Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component. 5. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. 2.1 CPU Installation For the installation of Intel 775-LAND CPU, please follow the steps below. 775-Pin Socket Overview English Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. 9 ASRock N73PV-S / N73V-S Motherboard Step 1. Open the socket: Step 1-1. Disengaging the lever by depressing down and out on the hook to clear retention tab. Step 1-2. Rotate the load lever to fully open position at approximately 135 degrees. Step 1-3. Rotate the load plate to fully open position at approximately 100 degrees. black line black line Step 2. Insert the 775-LAND CPU: Step 2-1. Hold the CPU by the edges where are marked with black lines. Step 2-2. Orient the CPU with IHS (Integrated Heat Sink) up. Locate Pin1 and the two orientation key notches. Pin1 orientation key notch orientation key notch Pin1 alignment key alignment key 775-Pin Socket 775-LAND CPU For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. English Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion. Step 2-4. Verify that the CPU is within the socket and properly mated to the orient keys. Step 3. Remove PnP Cap (Pick and Place Cap): Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal. 10 ASRock N73PV-S / N73V-S Motherboard 1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS. Step 4-2. While pressing down lightly on load plate, engage the load lever. Step 4-3. Secure load lever with load plate tab under retention tab of load lever. 2.2 Installation of CPU Fan and Heatsink For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for 775-LAND CPU. Step 1. Apply thermal interface material onto center of IHS on the socket surface. Step 3. Step 4. Place the heatsink onto the socket. Ensure fan cables are oriented on side closest to the CPU fan connector on the motherboard (CPU_FAN1, see page 2/3, No. 4). Align fasteners with the motherboard throughholes. Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners. English Step 2. If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Step 5. Step 6. Connect fan header with the CPU fan connector on the motherboard. Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. 11 ASRock N73PV-S / N73V-S Motherboard 2.3 Installation of Memor y Modules (DIMM) This motherboard provides two 240-pin DDR2 (Double Data Rate 2) DIMM slots. Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Step 2. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. English 12 ASRock N73PV-S / N73V-S Motherboard 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x1 slot) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc. PCIE2 (PCIE x16 slot) is used for PCI Express cards with x16 lane width graphics cards. Installing an expansion card Step 2. Step 3. Step 4. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Fasten the card to the chassis with screws. English Step 1. 13 ASRock N73PV-S / N73V-S Motherboard 2.5 Easy Multi Monitor Feature English This motherboard supports Multi Monitor upgrade. With the internal onboard VGA and the external add-on PCI Express VGA card, you can easily enjoy the benefits of Multi Monitor feature. Please refer to the following steps to set up a multi monitor environment: 1. Install the NVIDIA® PCI Express VGA card to PCIE2 (PCIE x16 slot). Please refer to page 13 for proper expansion card installation procedures for details. 2. Connect the D-Sub monitor cable to the VGA/D-Sub port on the I/O panel of this motherboard. Connect another D-Sub monitor cable to the VGA/D-Sub connector of the add-on PCI Express VGA card. Connect the DVI-D monitor cable to the VGA/DVI-D connector of the add-on PCI Express VGA card. 3. Boot your system. Press <F2> to enter BIOS setup. Enter “Share Memory” option to adjust the memory capability to [16MB], [32MB], [64MB], [128MB] or [256MB] to enable the function of onboard VGA/D-sub. Please make sure that the value you select is less than the total capability of the system memory. If you do not adjust the BIOS setup, the default value of “Share Memory”, [Auto], will disable onboard VGA/D-Sub function when the add-on VGA card is inserted to this motherboard. 4. Install the onboard VGA driver to your system. If you have installed the onboard VGA driver already, there is no need to install it again. 5. Set up a multi-monitor display. For Windows® XP / XP 64-bit OS: Right click the desktop, choose “Properties”, and select the “Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below. A. Click the “Identify” button to display a large number on each monitor. B. Right-click the display icon in the Display Properties dialog that you wish to be your primary monitor, and then select “Primary”. When you use multiple monitors with your card, one monitor will always be Primary, and all additional monitors will be designated as Secondary. C. Select the display icon identified by the number 2. D. Click “Extend my Windows desktop onto this monitor”. E. Right-click the display icon and select “Attached”, if necessary. F. Set the “Screen Resolution” and “Color Quality” as appropriate for the second monitor. Click “Apply” or “OK” to apply these new values. G. Repeat steps C through E for the diaplay icon identified by the number one, two and three. For Windows® VistaTM / VistaTM 64-bit OS: Right click the desktop, choose “Personalize”, and select the “Display Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below. A. Click the number ”2” icon. 14 ASRock N73PV-S / N73V-S Motherboard B. Click the items “This is my main monitor” and “Extend the desktop onto this monitor”. C. Click “OK” to save your change. D. Repeat steps A through C for the display icon identified by the number one, two and three. 6. Use Multi Monitor feature. Click and drag the display icons to positions representing the physical setup of your monitors that you would like to use. The placement of display icons determines how you move items from one monitor to another. 2.6 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when jumper cap is placed on these 2 pins. Jumper Setting PS2_USB_PWR1 Short Open Description Short pin2, pin3 to enable (see p.2/3 No. 1) +5VSB (standby) for PS/2 or USB wake up events. Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power supply. Clear CMOS Jumper (CLRCMOS1) (see p.2/3 No. 10) Default Clear CMOS English Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clearCMOS action. 15 ASRock N73PV-S / N73V-S Motherboard 2.7 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! FDD connector (33-pin FLOPPY1) (see p.2/3 No. 17) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2/3 No. 7) connect the black end to the IDE devices connect the blue end to the motherboard 80-conductor ATA 66/100133 cable Note: Please refer to the instruction of your IDE device vendor for the details. Serial ATAII Connectors (SATAII_1: see p.2/3, No. 8) (SATAII_2: see p.2/3, No. 13) SATAII_1 SATAII_3 SATAII_2 SATAII_4 (SATAII_3: see p.2/3, No. 11) (SATAII_4: see p.2/3, No. 12) Serial ATA (SATA) Data Cable Either end of the SATA data cable can be connected to the SATA / SATAII hard disk or the SATAII connector on this motherboard. English (Optional) Serial ATA (SATA) Power Cable (Optional) These four Serial ATAII (SATAII) connectors support SATA data cables for internal storage devices. The current SATAII interface allows up to 3.0 Gb/s data transfer rate. connect to the SATA HDD power connector connect to the power supply Please connect the black end of SATA power cable to the power connector on each drive. Then connect the white end of SATA power cable to the power connector of the power supply. 16 ASRock N73PV-S / N73V-S Motherboard N73PV-S: USB 2.0 Headers (9-pin US4_5) (see p.2 No. 26) Besides four default USB 2.0 ports on the I/O panel, there are three USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB6_7) (see p.2 No. 25) (9-pin USB8_9) (see p.2 No. 24) N73V-S: USB 2.0 Headers (9-pin US4_5) (see p.3 No. 25) Besides four default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB6_7) (see p.3 No. 24) (25-pin LPT1) (see p.2/3 No. 16) This is an interface for print port cable that allows convenient connection of printer devices. English Print Port Header 17 ASRock N73PV-S / N73V-S Motherboard Internal Audio Connectors This connector allows you (4-pin CD1) to receive stereo audio input from sound sources such as a CD-ROM, DVD-ROM, TV tuner card, or MPEG card. (CD1: see p.2/3 No. 19) CD1 Front Panel Audio Header (9-pin HD_AUDIO1) (see p.2/3 No. 18) This is an interface for front panel audio cable that allows convenient connection and control of audio devices. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for HD audio panel only. You don’t need to connect them for AC’97 audio panel. E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select Chipset Configuration. Set the Front Panel Control option from [Auto] to [Enabled]. F. Enter Windows system. Click the icon on the lower right hand taskbar to enter Realtek HD Audio Manager. For Windows® XP / XP 64-bit OS: Click “Audio I/O”, select “Connector Settings” , choose “Disable front panel jack detection”, and save the change by clicking “OK”. For Windows® VistaTM / VistaTM 64-bit OS: Click the right-top “Folder” icon , choose “Disable front panel jack detection”, and save the change by clicking “OK”. English System Panel Header (9-pin PANEL1) (see p.2/3 No. 14) This header accommodates several system front panel functions. 18 ASRock N73PV-S / N73V-S Motherboard Chassis Speaker Header Please connect the chassis speaker to this header. (4-pin SPEAKER 1) (see p.2/3 No. 15) Chassis Fan Connector Please connect a chassis fan cable to this connector and match the black wire to the ground pin. (3-pin CHA_FAN1) (see p.2/3 No. 9) CPU Fan Connector Please connect a CPU fan cable to this connector and match the black wire to the ground pin. 1 2 3 4 (4-pin CPU_FAN1) (see p.2/3 No. 4) Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3. Pin 1-3 Connected 3-Pin Fan Installation ATX Power Connector 12 24 1 13 (24-pin ATXPWR1) Please connect an ATX power supply to this connector. (see p.2/3 No. 6) Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13. 12 24 1 13 20-Pin ATX Power Supply Installation ATX 12V Connector Please connect an ATX 12V power supply to this connector. (4-pin ATX12V1) English (see p.2 No. 27 or p.3 No. 26) 19 ASRock N73PV-S / N73V-S Motherboard 2 . 8 Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly. 2.9 Installing Windows ® XP / XP 64-bit / Vista TM / Vista TM unctions Without 64-bit W ithout RAID FFunctions If you want to install Windows® XP, Windows® XP 64-bit, Windows® VistaTM or Windows® VistaTM 64-bit on your SATA / SATAII HDDs without RAID functions, please follow below procedures according to the OS you install. 2.9.1 Installing Windows ® XP / XP 64-bit Without RAID FFunctions unctions If you want to install Windows® XP / Windows® XP 64-bit on your SATA / SATAII HDDs without RAID functions, please follow below steps. Using SATA / SATAII HDDs without NCQ and Hot Plug functions STEP 1: Set Up BIOS. A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration. B. Set the “SATA Operation Mode” option to [IDE]. STEP 2: Install Windows® XP / XP 64-bit OS on your system. 2.9.2 Installing Windows ® Vista TM / Vista TM 64-bit Without RAID FFunctions unctions If you want to install Windows® VistaTM / Windows® VistaTM 64-bit on your SATA / SATAII HDDs without RAID functions, please follow below steps. Using SATA / SATAII HDDs without NCQ and Hot Plug functions STEP 1: Set Up BIOS. English A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration. B. Set the “SATA Operation Mode” option to [IDE]. STEP 2: Install Windows® VistaTM / VistaTM 64-bit OS on your system. Using SATA / SATAII HDDs with NCQ and Hot Plug functions STEP 1: Set Up BIOS. A. Enter BIOS SETUP UTILITY Advanced screen B. Set the “SATA Operation Mode” option to [AHCI]. IDE Configuration. 20 ASRock N73PV-S / N73V-S Motherboard STEP 2: Install Windows® VistaTM / VistaTM 64-bit OS on your system. Insert the Windows® VistaTM / Windows® VistaTM 64-bit optical disk into the optical drive to boot your system, and follow the instruction to install Windows® VistaTM / Windows® VistaTM 64-bit OS on your system. When you see “Where do you want to install Windows? ” page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the bottom to load the NVIDIA® AHCI drivers. NVIDIA® AHCI drivers are in the following path in our Support CD: (There are two ASRock Support CD in the motherboard gift box pack, please choose the one for Windows® VistaTM / VistaTM 64-bit.) .. \ I386 \ AHCI_Vista (For Windows® VistaTM OS) .. \ AMD64\ AHCI_Vista64 (For Windows® VistaTM 64-bit OS) After that, please insert Windows® VistaTM / Windows® VistaTM 64-bit optical disk into the optical drive again to continue the installation. 2 . 1 0 Installing Windows ® XP / XP 64-bit / Vista TM / Vista TM 64-bit W ith RAID FFunctions unctions If you want to install Windows® XP / XP 64-bit / VistaTM / VistaTM 64-bit on your SATA / SATAII HDDs with RAID functions, please refer to the document at the following path in the Support CD for detailed procedures: ..\ RAID Installation Guide 2 . 1 1 Untied Overclocking TTechnology echnology This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment. English Please refer to the warning on page 7 for the possible overclocking risk before you apply Untied Overclocking Technology. 21 ASRock N73PV-S / N73V-S Motherboard 3. BIOS Information The Flash Memory on the motherboard stores BIOS Setup Utility. When you start up the computer, please press <F2> during the Power-On-Self-Test (POST) to enter BIOS Setup utility; otherwise, POST continues with its test routines. If you wish to enter BIOS Setup after POST, please restart the system by pressing <Ctl> + <Alt> + <Delete>, or pressing the reset button on the system chassis. The BIOS Setup program is designed to be user-friendly. It is a menu-driven program, which allows you to scroll through its various sub-menus and to select among the predetermined choices. For the detailed information about BIOS Setup, please refer to the User Manual (PDF file) contained in the Support CD. 4. Software Support CD information This motherboard supports various Microsoft® Windows® operating systems: XP / XP 64-bit / VistaTM / VistaTM 64-bit. The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance motherboard features. To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP. EXE” from the BIN folder in the Support CD to display the menus. English 22 ASRock N73PV-S / N73V-S Motherboard 1. Einführung Wir danken Ihnen für den Kauf des ASRock N73PV-S / N73V-S Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit. Diese Schnellinstallationsanleitung führt in das Motherboard und die schrittweise Installation ein. Details über das Motherboard finden Sie in der Bedienungsanleitung auf der Support-CD. Da sich Motherboard-Spezifikationen und BIOS-Software verändern können, kann der Inhalt dieses Handbuches ebenfalls jederzeit geändert werden. Für den Fall, dass sich Änderungen an diesem Handbuch ergeben, wird eine neue Version auf der ASRock-Website, ohne weitere Ankündigung, verfügbar sein. Die neuesten Grafikkarten und unterstützten CPUs sind auch auf der ASRock-Website aufgelistet. ASRock-Website: http://www.asrock.com Wenn Sie technische Unterstützung zu Ihrem Motherboard oder spezifische Informationen zu Ihrem Modell benötigen, besuchen Sie bitte unsere Webseite: www.asrock.com/support/index.asp 1.1 Kartoninhalt Deutsch ASRock N73PV-S / N73V-S Motherboard (Micro ATX-Formfaktor: 24.4 cm x 17.8 cm; 9.6 Zoll x 7.0 Zoll) ASRock N73PV-S / N73V-S Schnellinstallationsanleitung ASRock N73PV-S / N73V-S Support-CD Ein 80-adriges Ultra-ATA 66/100/133 IDE-Flachbandkabel (optional) Ein Serial ATA (SATA) -Datenkabel (optional) Ein Serial ATA (SATA) -Festplattenstromkabel (optional) Ein I/O Panel Shield 23 ASRock N73PV-S / N73V-S Motherboard 1.2 Spezifikationen Plattform CPU Chipsatz Speicher Erweiterungssteckplätze Onboard-VGA Audio LAN Deutsch E/A-Anschlüsse an der Rückseite 24 - Micro ATX-Formfaktor: 24.4 cm x 17.8 cm; 9.6 Zoll x 7.0 Zoll - LGA 775 für Intel® CoreTM 2 Extreme / CoreTM 2 Quad / CoreTM 2 Duo / Pentium® Dual Core / Celeron® Dual Core / Celeron® unterstützt Quad Core Yorkfield und Dual Core Wolfdale Prozessoren - FSB1333/1066/800/533MHz - Unterstützt Hyper-Threading-Technologie (siehe VORSICHT 1) - Unterstützt Untied-Übertaktungstechnologie (siehe VORSICHT 2) - Unterstützt EM64T-CPU - NVIDIA® GeForce 7100 / nForce 630i (N73PV-S) - NVIDIA® GeForce 7050 / nForce 610i (N73V-S) - 2 x Steckplätze für DDR2 - Unterstützt DDR2 800/667/533 non-ECC, ungepufferter Speicher - Max. Kapazität des Systemspeichers: 16GB (siehe VORSICHT 3) - 1 x PCI Express x16-Steckplätze - 1 x PCI Express x1-Steckplätze - 2 x PCI -Steckplätze - Integrierte NVIDIA® GeForce7100 (N73PV-S) - Integrierte NVIDIA® GeForce7050 (N73V-S) - DX9.0 VGA, Pixel Shader 3.0 - Maximal gemeinsam genutzter Speicher 256 MB (siehe VORSICHT 4) - 5.1 CH Windows® VistaTM Premium Level HD Audio (ALC662 Audio Codec) - Realtek PHY RTL8201EL - Speed: 10/100 Ethernet - Unterstützt Wake-On-LAN I/O Panel - 1 x PS/2-Mausanschluss - 1 x PS/2-Tastaturanschluss - 1 x Serieller port: COM1 - 1 x VGA port - 4 x Standard-USB 2.0-Anschlüsse - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - HD Audiobuchse: Audioeingang / Lautsprecher vorne / Mikrofon ASRock N73PV-S / N73V-S Motherboard Anschlüsse - 4 x SATAII-Anschlüsse, unterstützt bis 3.0 Gb/s Datenübertragungsrate, unterstützt RAID (RAID 0, RAID 1, RAID 0+1, JBOD und RAID 5), NCQ, AHCI und “Hot Plug” Funktionen (siehe VORSICHT 5) Betriebssysteme Zertifizierungen VistaTM 64-Bit - FCC, CE BIOS Support-CD Einzigartige Eigenschaft Hardware Monitor Deutsch * RAID 0+1 und RAID 5-Funktionen gelten für N73PV-S Nur - 1 x ATA133 IDE-Anschlüsse (Unterstützt bis 2 IDE-Geräte) - 1 x FDD-Anschlüsse - 1 x Druckerport-Anschlussleiste - CPU/Gehäuse-Lüfteranschluss - 24-pin ATX-Netz-Header - 4-pin anschluss für 12V-ATX-Netzteil - Interne Audio-Anschlüsse - Anschluss für Audio auf der Gehäusevorderseite - 3 x USB 2.0-Anschlüsse (unterstützt 6 USB 2,0-Ports) (N73PV-S) (siehe VORSICHT 6) - 2 x USB 2.0-Anschlüsse (unterstützt 4 USB 2,0-Ports) (N73V-S) (siehe VORSICHT 6) - 4Mb AMI BIOS - AMI legal BIOS mit Unterstützung für “Plug and Play” - ACPI 1.1-Weckfunktionen - JumperFree-Modus - SMBIOS 2.3.1 - Unterstützt Smart BIOS - Treiber, Dienstprogramme, Antivirussoftware (Probeversion) - ASRock OC Tuner (siehe VORSICHT 7) - Intelligent Energy Saver (Intelligente Energiesparfunktion) (siehe VORSICHT 8) - Sofortstart - Hybrid Booster: - Schrittloser CPU-Frequenz-Kontrolle (siehe VORSICHT 9) - ASRock U-COP (siehe VORSICHT 10) - Boot Failure Guard (B.F.G. – Systemstartfehlerschutz) - Überwachung der CPU-Temperatur - Motherboardtemperaturerkennung - Drehzahlmessung für CPU-Lüfter - Drehzahlmessung für Gehäuselüfter - CPU-Lüftergeräuschdämpfung - Spannungsüberwachung: +12V, +5V, +3.3V, Vcore - Unterstützt Microsoft® Windows® XP / XP 64-Bit / VistaTM / * Für die ausführliche Produktinformation, besuchen Sie bitte unsere Website: http://www.asrock.com 25 ASRock N73PV-S / N73V-S Motherboard WARNUNG Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen. Es geschieht dann auf eigene Gefahr und auf Ihre Kosten. Wir übernehmen keine Verantwortung für mögliche Schäden, die aufgrund von Overclocking verursacht wurden. VORSICHT! 1. 2. 3. 4. 5. 6. 7. Deutsch 8. Die Einstellung der “Hyper-Threading Technology”, finden Sie auf Seite 39 des auf der Support-CD enthaltenen Benutzerhandbuches beschrieben. Dieses Motherboard unterstützt die Untied-Übertaktungstechnologie. Unter “Entkoppelte Übertaktungstechnologie” auf Seite 21 finden Sie detaillierte Informationen. Durch Betriebssystem-Einschränkungen kann die tatsächliche Speichergröße weniger als 4 GB betragen, da unter Windows® XP und Windows® Vista™ etwas Speicher zur Nutzung durch das System reserviert wird. Unter Windows® XP 64-bit und Windows® Vista™ 64-bit mit 64-Bit-CPU besteht diese Einschränkung nicht. Die Maximalspeichergröße ist von den Chipshändler definiert und umgetauscht. Bitte überprüfen Sie NVIDIA ® website für die neuliche Information. Bevor Sie eine SATA II Festplatte mit dem SATA II Anschluss verbinden, lesen Sie bitte die “Anleitung zur SATA II Festplatteneinrichtung“ auf Seite 24, um Ihre SATA II Festplatte in den SATA II Modus umzuschalten. SATA-Festplatten können Sie auch direkt mit dem SATA II-Anschluss verbinden. Das Power Management für USB 2.0 arbeitet unter Microsoft® Windows® VistaTM 64-Bit / VistaTM / XP 64-Bit / XP SP1 oder SP2 einwandfrei. Es ist ein benutzerfreundlicher ASRock Übertaktenswerkzeug, das erlaubt, dass Sie Ihr System durch den Hardware-Monitor Funktion zu überblicken und Ihre Hardware-Geräte übertakten, um die beste Systemleistung unter der Windows® Umgebung zu erreichen. Besuchen Sie bitte unsere Website für die Operationsverfahren von ASRock OC Tuner. ASRock-Website: http://www.asrock.com Mit einem fortschrittlichen, eigenständigen Hard- und Softwaredesign nutzt der Intelligent Energy Saver eine revolutionäre Technologie, die bisher unerreichte Energieeinsparungen ermöglicht. Mit anderen Worten: Sie verbrauchen besonders wenig Energie und erreichen einen hohen Wirkungsgrad, ohne dass dies zu Lasten der Rechenleistung geht. Auf unseren Internetseiten finden Sie einige Erläuterungen zur Funktionsweise des Intelligent Energy Saver. ASRock-Website: http://www.asrock.com 26 ASRock N73PV-S / N73V-S Motherboard 9. Obwohl dieses Motherboard stufenlose Steuerung bietet, wird Overclocking nicht empfohlen. Frequenzen, die über den für den jeweiligen Prozessor vorgesehenen liegen, können das System instabil werden lassen oder die CPU beschädigen. 10. Wird eine Überhitzung der CPU registriert, führt das System einen automatischen Shutdown durch. Bevor Sie das System neu starten, prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert, und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein. Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen. 1.3 Einstellung der Jumper Die Abbildung verdeutlicht, wie Jumper g esetzt werden. Werden Pins durch Jumperkappen verdeckt, ist der Jumper “gebrückt”. Werden keine Pins durch Jumperkappen verdeckt, ist der Jumper “offen”. Die Abbildung zeigt einen 3-Pin Jumper dessen Pin1 und Pin2 “gebrückt” sind, bzw. es befindet sich eine Jumper-Kappe auf diesen beiden Pins. Jumper Einstellun PS2_USB_PW1 Gebrückt Offen Überbrücken Sie Pin2, Pin3, um +5VSB (Standby) zu setzen und die PS/2 oder USBWeckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. (siehe S.2/3, Punkt 1) CMOS löschen (CLRCMOS1, 3-Pin jumper) (siehe S.2/3, Punkt 10) DefaultEinstellung CMOS löschen Deutsch Hinweis: CLRCMOS1 erlaubt Ihnen das Löschen der CMOS-Daten. Diese beinhalten das System-Passwort, Datum, Zeit und die verschiedenen BIOS-Parameter. Um die Systemparameter zu löschen und auf die Werkseinstellung zurückzusetzen, schalten Sie bitte den Computer ab und entfernen das Stromkabel. Benutzen Sie eine Jumperkappe, um die Pin 2 und Pin 3 an CLRCMOS1 für 5 Sekunden kurzzuschließen. Bitte vergessen Sie nicht, den Jumper wieder zu entfernen, nachdem das CMOS gelöscht wurde. Bitte vergessen Sie nicht, den Jumper wieder zu entfernen, nachdem das CMOS gelöscht wurde. Wenn Sie den CMOS- 27 ASRock N73PV-S / N73V-S Motherboard Inhalt gleich nach dem Aktualisieren des BIOS löschen müssen, müssen Sie zuerst das System starten und dann wieder ausschalten, bevor Sie den CMOS-Inhalt löschen. 1.4 Anschlüsse Anschlussleisten sind KEINE Jumper. Setzen Sie KEINE Jumperkappen auf die Pins der Anschlussleisten. Wenn Sie die Jumperkappen auf die Anschlüsse setzen, wird das Motherboard permanent beschädigt! Anschluss Anschluss für das Floppy-Laufwerk Beschreibung (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2/3, Punkt 17) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2/3, Punkt 7) Blauer Anschluss zum Motherboard Schwarzer Anschluss zur Festplatte 80-adriges ATA 66/100/133 Kabel Hinweis: Details entnehmen Sie bitte den Anweisungen Ihres IDE-Gerätehändlers. Seriell-ATAII-Anschlüsse (SATAII_1: siehe S.2/3 - No. 8) (SATAII_2: siehe S.2/3 - No. 13) SATAII_1 SATAII_3 SATAII_2 SATAII_4 (SATAII_3: siehe S.2/3 - No. 11) (SATAII_4: siehe S.2/3 - No. 12) Deutsch Serial ATA- (SATA-) Datenkabel (Option) Diese vier Serial ATAII(SATAII-)Verbínder unterstützten SATA-Datenkabel für interne Massenspeichergeräte. Die aktuelle SATAII-Schnittstelle ermöglicht eine Datenübertragungsrate bis 3,0 Gb/s. SJedes Ende des SATA Datenkabels kann an die SATA / SATAII Festplatte oder das SATAII Verbindungsstück auf dieser Hauptplatine angeschlossen werden. 28 ASRock N73PV-S / N73V-S Motherboard Serial ATA- (SATA-) Stromversorgungskabel (Option) Verbindung zum SATA-HDD-Stromanschluss Verbindung zum Netzteil N73PV-S: USB 2.0-Header (9-pol. USB4_5) (siehe S.2 - Nr. 26) (9-pol. USB6_7) Verbinden Sie das schwarze Ende des SATA-Netzkabels mit dem Netzanschluss am Laufwerk. Verbinden Sie dann das weiße Ende des SATAStromversorgungskabels mit dem Stromanschluss des Netzteils. Zusätzlich zu den vier üblichen USB 2.0-Ports an den I/O-Anschlüssen befinden sich drei USB 2.0-Anschlussleisten am Motherboard. Pro USB 2.0Anschlussleiste werden zwei USB 2.0-Ports unterstützt. (siehe S.2 - Nr. 25) (9-pol. USB8_9) (siehe S.2 - Nr. 24) (9-pol. USB4_5) (siehe S.3 - Nr. 25) (9-pol. USB6_7) Zusätzlich zu den vier üblichen USB 2.0-Ports an den I/O-Anschlüssen befinden sich zwei USB 2.0-Anschlussleisten am Motherboard. Pro USB 2.0Anschlussleiste werden zwei USB 2.0-Ports unterstützt. Deutsch N73V-S: USB 2.0-Header (siehe S.3 - Nr. 24) 29 ASRock N73PV-S / N73V-S Motherboard Druckerport-Anschlussleiste Dies ist eine Schnittstelle zum Anschluss eines DruckerportKabels, mit dem Sie passende Drucker auf einfache Weise anschließen können. (25-pol. LPT1) (siehe S.2/3 - No. 16) Interne Audio-Anschlüsse (4-Pin CD1) (CD1: siehe S.2/3, Punkt 19) CD1 Anschluss für Audio auf der Gehäusevorderseite (9-Pin HD_AUDIO1) (siehe S.2/3, Punkt 18) Diese ermöglichen Ihnen StereoSignalquellen, wie z. B. CD-ROM, DVD-ROM, TV-Tuner oder MPEG-Karten mit Ihrem System zu verbinden. Dieses Interface zu einem Audio-Panel auf der Vorderseite Ihres Gehäuses, ermöglicht Ihnen eine bequeme Kontrolle über Audio-Geräte. Deutsch 1. High Definition Audio unterstützt Jack Sensing (automatische Erkennung falsch angeschlossener Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der Installation im System die Anweisungen in unserem Handbuch und im Gehäusehandbuch. 2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie nachstehend beschrieben an der Front-Audioanschlussleiste: A. Schließen Sie Mic_IN (MIC) an MIC2_L an. B. Schließen Sie Audio_R (RIN) an OUT2_R und Audio_L (LIN) an OUT2_L an. C. Schließen Sie Ground (GND) an Ground (GND) an. D. MIC_RET und OUT_RET sind nur für den HD-Audioanschluss gedacht. Diese Anschlüsse müssen nicht an die AC’97-Audioleiste angeschlossen werden. E. Rufen Sie das BIOS-Setup-Dienstprogramm auf. Wechseln Sie zu Erweiterte Einstellungen und wählen Sie Chipset-Konfiguration. Setzen Sie die Option Frontleistenkontrolle von [Automatisch] auf [Aktiviert]. F. Rufen Sie das Windows-System auf. Klicken Sie auf das Symbol in der Taskleiste unten rechts, um den Realtek HD Audio-Manager aufzurufen. Für Windows® XP / XP 64-Bit Betriebssystem: Klicken Sie auf “Audio-E/A”, wählen Sie die “Anschlusseinstellungen” , wählen Sie “Erkennung der Frontleistenbuchse deaktivieren” und speichern Sie die Änderung durch Klicken auf “OK”. 30 ASRock N73PV-S / N73V-S Motherboard Für Windows® VistaTM / VistaTM 64-Bit Betriebssystem: Die Rechtoberseite „Dateiordner“ Ikone anklicken , „Schalttafel Buchse Entdeckung sperren“ wählen und die Änderung speichern, indem Sie „OKAY“ klicken. System Panel Anschluss (siehe S.2/3, Punkt 14) Dieser Anschluss ist für die verschiedenen Funktionen der Gehäusefront. Gehäuselautsprecher-Header Schließen Sie den (4-pin SPEAKER1) Gehäuselautsprecher an diesen Header an. (9-Pin PANEL1) (siehe S.2/3, Punkt 15) Gehäuse-Lüfteranschluss Verbinden Sie das Gehäuselüfterkabel mit diesem Anschluss und passen Sie den schwarzen Draht dem Erdungsstift an. (3-pin CHA_FAN1) (siehe S.2/3, Punkt 9) CPU-Lüfteranschluss (4-pin CPU_FAN1) (siehe S.2/3, Punkt 4) Verbinden Sie das CPU Lüfterkabel mit diesem Anschluss und passen Sie den schwarzen Draht dem Erdungsstift an. 1 2 3 4 Obwohl dieses Motherboard einen vierpoligen CPU-Lüfteranschluss (Quiet Fan) bietet, können auch CPU-Lüfter mit dreipoligem Anschluss angeschlossen werden; auch ohne Geschwindigkeitsregulierung. Wenn Sie einen dreipoligen CPU-Lüfter an den CPU-Lüferanschluss dieses Motherboards anschließen möchten, verbinden Sie ihn bitte mit den Pins 1 – 3. Pins 1–3 anschließen ATX-Netz-Header 12 24 1 13 (24-pin ATXPWR1) (siehe S.2/3, Punkt 6) Deutsch Lüfter mit dreipoligem Anschluss installieren Verbinden Sie die ATXStromversorgung mit diesem Header. 31 ASRock N73PV-S / N73V-S Motherboard Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für 12V-ATX-Netzteil (4-pin ATX12V1) (siehe S.2, Punkt 27 oder S.3, Punkt 26) 12 24 1 13 Beachten Sie bitte, dass Sie eine Stromversorgung mit ATX 12Volt-Stecker mit diesem Anschluss verbinden müssen, damit ausreichend Strom geliefert werden kann. Andernfalls reicht der Strom nicht aus, das System zu starten. Deutsch 32 ASRock N73PV-S / N73V-S Motherboard 1 24 13 2. BIOS-Information Das Flash Memory dieses Motherboards speichert das Setup-Utility. Drücken Sie <F2> während des POST (Power-On-Self-Test) um ins Setup zu gelangen, ansonsten werden die Testroutinen weiter abgearbeitet. Wenn Sie ins Setup gelangen wollen, nachdem der POST durchgeführt wurde, müssen Sie das System über die Tastenkombination <Ctrl> + <Alt> + <Delete> oder den Reset-Knopf auf der Gehäusevorderseite, neu starten. Natürlich können Sie einen Neustart auch durchführen, indem Sie das System kurz ab- und danach wieder anschalten. Das Setup-Programm ist für eine bequeme Bedienung entwickelt worden. Es ist ein menügesteuertes Programm, in dem Sie durch unterschiedliche Untermenüs scrollen und die vorab festgelegten Optionen auswählen können. Für detaillierte Informationen zum BIOS-Setup, siehe bitte das Benutzerhandbuch (PDF Datei) auf der Support CD. 3. Software Support CD information Dieses Motherboard unterstützt eine Reiche von Microsoft® Windows® Betriebssystemen: XP / XP 64-Bit / VistaTM / VistaTM 64-Bit. Die Ihrem Motherboard beigefügte Support-CD enthält hilfreiche Software, Treiber und Hilfsprogramme, mit denen Sie die Funktionen Ihres Motherboards verbessern können Legen Sie die Support-CD zunächst in Ihr CD-ROM-Laufwerk ein. Der Willkommensbildschirm mit den Installationsmenüs der CD wird automatisch aufgerufen, wenn Sie die “Autorun”Funktion Ihres Systems aktiviert haben. Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert. Deutsch 12 33 ASRock N73PV-S / N73V-S Motherboard 1. Introduction Merci pour votre achat d’une carte mère ASRock N73PV-S / N73V-S, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité et la fiabilité au long terme. Ce Guide d’installation rapide présente la carte mère et constitue un guide d’installation pas à pas. Des informations plus détaillées concernant la carte mère pourront être trouvées dans le manuel l’utilisateur qui se trouve sur le CD d’assistance. Les spécifications de la carte mère et le BIOS ayant pu être mis à jour, le contenu de ce manuel est sujet à des changements sans notification. Au cas où n’importe qu’elle modification intervenait sur ce manuel, la version mise à jour serait disponible sur le site web ASRock sans nouvel avis. Vous trouverez les listes de prise en charge des cartes VGA et CPU également sur le site Web ASRock. Site web ASRock, http://www.asrock.com Si vous avez besoin de support technique en relation avec cette carte mère, veuillez consulter notre site Web pour de plus amples informations particulières au modèle que vous utilisez. www.asrock.com/support/index.asp 1.1 Contenu du paquet Carte mère ASRock N73PV-S / N73V-S (Facteur de forme Micro ATX: 9.6 pouces x 7.0 pouces, 24.4 cm x 17.8 cm) Guide d’installation rapide ASRock N73PV-S / N73V-S CD de soutien ASRock N73PV-S / N73V-S Un câble ruban IDE Ultra ATA 66/100/133 80 conducteurs (en option) Un câbles de données de série ATA (SATA) (en option) Un câbles d’alimentation de série ATA (SATA) HDD (en option) Un I/O Panel Shield F rançais 34 ASRock N73PV-S / N73V-S Motherboard 1 . 2 Spécifications CPU Chipsets Mémoire Slot d’extension VGA sur carte Audio LAN Panneau arrière E/S - Facteur de forme Micro ATX: 9.6 pouces x 7.0 pouces, 24.4 cm x 17.8 cm - LGA 775 pour Intel® CoreTM 2 Extreme / CoreTM 2 Quad / CoreTM 2 Duo / Pentium® Dual Core / Celeron® Dual Core / Celeron® acceptant les processeurs Quad Core Yorkfield et Dual Core Wolfdale - FSB1333/1066/800/533MHz - Prise en charge de la technologie Hyper-Threading (voir ATTENTION 1) - Prend en charge la technologie Untied Overclocking (voir ATTENTION 2) - Prise en charge de la technologie EM64T par le CPU - NVIDIA® GeForce 7100 / nForce 630i (N73PV-S) - NVIDIA® GeForce 7050 / nForce 610i (N73V-S) - 2 x slots DIMM DDR2 - Supporte DDR2 800/667/533 non-ECC, sans amortissement mémoire - Capacité maxi de mémoire système: 16GB (voir ATTENTION 3) - 1 x slot PCI Express x16 - 1 x slot PCI Express x1 - 2 x slots PCI - NVIDIA® Integre GeForece 7100 (N73PV-S) - NVIDIA® Integre GeForece 7050 (N73V-S) - VGA DX9.0, nuanceur de pixels 3.0 - mémoire partagée max 256MB (voir ATTENTION 4) - 5.1 Son haute définition de première qualité CH Windows® VistaTM (codec audio ALC662) - Realtek PHY RTL8201EL - Vitesse: 10/100 Ethernet - Support du Wake-On-LAN I/O Panel - 1 x port souris PS/2 - 1 x port clavier PS/2 - 1 x port série: COM 1 - 1 x port VGA - 4 x ports USB 2.0 par défaut - 1 x port LAN RJ-45 avec LED (ACT/LED CLIGNOTANTE et LED VITESSE) F ran çais rançais Format 35 ASRock N73PV-S / N73V-S Motherboard Connecteurs - Prise HD Audio: Entrée Ligne / Haut-parleur frontal / Microphone - 4 x connecteurs SATAII, prennent en charge un taux de transfert de données pouvant aller jusqu’à 3.0Go/s, supporte RAID (RAID 0, RAID 1, RAID 0+1, JBOD et RAID 5), NCQ, AHCI et “Hot-Plug” (Connexion à chaud) (voir ATTENTION 5) * Les fonctions RAID 0+1 e RAID 5 sont pour N73PV-S uniquement BIOS CD d’assistance Caractéristique unique F rançais Surveillance système - 1 x ATA133 IDE connecteurs (prend en charge jusqu’à 2 périphériques IDE) - 1 x Port Disquette - 1 x embase de port d’impression - Connecteur pour ventilateur de CPU/Châssis - br. 24 connecteur d’alimentation ATX - br. 4 connecteur d’alimentation 12V ATX - Connecteurs audio internes - Connecteur audio panneau avant - 3 x En-tête USB 2.0 (Prend en charge 6 ports USB 2.0) (N73PV-S) (voir ATTENTION 6) - 2 x En-tête USB 2.0 (Prend en charge 4 ports USB 2.0) (N73V-S) (voir ATTENTION 6) - 4Mb BIOS AMI - BIOS AMI - Support du “Plug and Play” - Compatible pour événements de réveil ACPI 1.1 - Gestion jumperless - Support SMBIOS 2.3.1 - Unterstützt Smart BIOS - Pilotes, utilitaires, logiciel anti-virus (Version d’essai) - Tuner ASRock OC (voir ATTENTION 7) - Économiseur d’énergie intelligent (voir ATTENTION 8) - l'Instant Boot - L’accélérateur hybride: - Contrôle direct de la fréquence CPU (voir ATTENTION 9) - ASRock U-COP (voir ATTENTION 10) - Garde d’échec au démarrage (B.F.G.) - Contrôle de la température CPU - Mesure de température de la carte mère - Tachéomètre ventilateur CPU - Tachéomètre ventilateur châssis - Ventilateur silencieux d’unité centrale - Monitoring de la tension: +12V, +5V, +3.3V, Vcore 36 ASRock N73PV-S / N73V-S Motherboard OS Certifications - Microsoft® Windows® XP / XP 64-bit / VistaTM / VistaTM 64-bit - FCC, CE * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou utiliser des outils de tiers pour l’overclocking. L’overclocking peut affecter la stabilité de votre système, ou même causer des dommages aux composants et dispositifs de votre système. Si vous le faites, c’est à vos frais et vos propres risques. Nous ne sommes pas responsables des dommages possibles causés par l’overclocking. ATTENTION! 2. 3. 4. 5. 6. 7. 8. En ce qui concerne le paramétrage “Hyper-Threading Technology”, veuillez consulter la page 39 du manuel de l’utilisateur sur le CD technique. Cette carte mère prend en charge la technologie Untied Overclocking. Veuillez lire “La technologie de surcadençage à la volée” à la page 21 pour plus d’informations. Du fait des limites du système d’exploitation, la taille mémoire réelle réservée au système pourra être inférieure à 4 Go sous Windows® XP et Windows® VistaTM. Avec Windows® XP 64 bits et Windows® VistaTM 64 bits avec CPU 64 bits, il n’y a pas ce genre de limitation. La dimension maximum du memoire partage est definie par le vendeur de jeu de puces et est sujet de changer. Veuillez verifier la NVIDIA ® website pour les informations recentes SVP. Avant d’installer le disque dur SATAII sur le connecteur SATAII, veuillez lire le «Guide d’Installation du disque dur SATAII», page 24, pour mettre votre lecteur de disque SATAII en mode SATAII. Vous pouvez également brancher le disque dur SATA directement sur le connecteur SATAII. La gestion de l’alimentation pour l’USB 2.0 fonctionne bien sous Microsoft® Windows® VistaTM 64-bit/ VistaTM / XP 64-bit / XP SP1; SP2. Il s’agit d’un usage facile ASRock overclocking outil qui vous permet de surveiller votre système en fonction de la monitrice de matériel et overclocker vos périphériques de matériels pour obtenir les meilleures performances du système sous environnement Windows®. S’il vous plaît visitez notre site web pour le fonctionnement des procédures de Tuner ASRock OC. ASRock website: http://www.asrock.com Comprenant une conception matérielle et logicielle propriétaire avancée, Intelligent Energy Saver est une technologie révolutionnaire qui offre des gains d’énergie incomparables. En d’autres termes, il est capable d’apporter des économies d’énergie exceptionnelles et d’améliorer l’efficacité énergétique sans sacrifier aux performances F ran çais rançais 1. 37 ASRock N73PV-S / N73V-S Motherboard de calcul. Veuillez visiter notre site Web pour les procédures d’utilisation d’Intelligent Energy Saver. Site Web ASRock : http://www.asrock.com 9. Même si cette carte mère offre un contrôle sans souci, il n’est pas recommandé d’y appliquer un over clocking. Des fréquences de bus CPU autres que celles recommandées risquent de rendre le système instable ou d’endommager le CPU et la carte mère. 10. Lorsqu’une surchauffe du CPU est détectée, le système s’arrête automatiquement. Avant de redémarrer le système, veuillez vérifier que le ventilateur d’UC sur la carte mère fonctionne correctement et débranchez le cordon d’alimentation, puis rebranchez-le. Pour améliorer la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique entre le CPU le dissipateur lors de l’installation du PC. 1.3 Réglage des cavaliers L’illustration explique le réglage des cavaliers. Quand un capuchon est placé sur les broches, le cavalier est « FERME ». Si aucun capuchon ne relie les broches,le cavalier est « OUVERT ». L’illustration montre un cavalier à 3 broches dont les broches 1 et 2 sont « FERMEES » quand le capuchon est placé sur ces 2 broches. Le cavalier Ferme Ouvert Description PS2_USB_PW1 Court-circuitez les broches 2 et 3 pour choisir +5VSB (standby) et permettre aux périphériques PS/2 ou USB de réveiller le système. Note: Pour sélectionner +5VSB, il faut obligatoirement 2 Amp et un courant standby supérieur fourni par l’alimentation. (voir p.2/3 fig. 1) Effacer la CMOS (CLRCMOS1) F rançais (voir p.2/3 fig. 10) 38 Paramètres par défaut Effacer la CMOS Note: CLRCMOS1 vous permet d’effacer les données qui se trouvent dans la CMOS. Les données dans la CMOS comprennent les informations de configuration du système telles que le mot de passe système, la date, l’heure et les paramètres de configuration du système. Pour effacer et réinitialiser les paramètres du système pour retrouver la configuration par défaut, veuillez mettre l’ordinateur hors tension et débrancher le cordon d’alimentation de l’alimentation électrique. Attendez 15 secondes, puis ASRock N73PV-S / N73V-S Motherboard utilisez un capuchon de cavalier pour court-circuiter la broche 2 et la broche 3 sur CLRCMOS1 pendant 5 secondes. Après avoir court-circuité le cavalier Effacer la CMOS, veuillez enlever le capuchon de cavalier. Toutefois, veuillez ne pas effacer la CMOS tout de suite après avoir mis le BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à l’opération d’effacement de la CMOS. 1.4 Connecteurs Les connecteurs NE SONT PAS des cavaliers. NE PLACEZ AUCUN capuchon sur ces connecteurs. Poser les bouchons pour cavaliers audessus des connecteurs provoquera des dommages irrémédiables à la carte mère! Les connecteurs Description Connecteur du lecteur de disquette (FLOPPY1 br. 33) le côté avec fil rouge côté Broche1 (voir p.2/3 fig. 17) Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) (IDE1 br. 39, voir p.2/3 fig. 7) Connecteurs Série ATAII (SATAII_1: voir p.2/3 fig. 8) (SATAII_2: voir p.2/3 fig. 13) (SATAII_3: voir p.2/3 fig. 11) (SATAII_4: voir p.2/3 fig. 12) SATAII_1 SATAII_3 SATAII_2 SATAII_4 Ces quatre connecteurs Serial ATA (SATAII) prennent en charge les disques durs SATA ou SATAII pour les dispositifs de stockage interne. L’interface SATAII actuelle permet des taux transferts de données pouvant aller jusqu’à 3,0 Go/s. 39 ASRock N73PV-S / N73V-S Motherboard F ran çais rançais connecteur bleu connecteur noir vers la carte mère vers le disque dur Câble ATA 66/100/133 80 conducteurs Note: Veuillez vous reporter aux instructions du fabricant de votre IDE périphérique pour les détails. Câble de données Série ATA (SATA) Toute cote du cable de data SATA peut etre connecte au disque dur SATA / SATAII ou au connecteur SATAII sur la carte mere. (en option) Cordon d’alimentation Série ATA (SATA) (en option) connecter au connecteur d’alimentation du disque dur SATA N73PV-S: En-tête USB 2.0 (USB4_5 br.9) (voir p.2 No. 26) (USB6_7 br.9) connecter à l’unité d’alimentation électrique Veuillez connecter l’extrémité noire du cordon d’alimentation SATA sur le connecteur d’alimentation sur chaque unité. Connectez ensuite l’extrémité blanche du cordon d’alimentation SATA sur le connecteur d’alimentation de l’unité d’alimentation électrique. A côté des quatre ports USB 2.0 par défaut sur le panneau E/S, il y a trois embases USB 2.0 sur cette carte mère. Chaque embase USB 2.0 peut prendre en charge 2 ports USB 2.0. (voir p.2 No. 25) (USB8_9 br.9) (voir p.2 No. 24) N73V-S: En-tête USB 2.0 F rançais (USB4_5 br.9) (voir p.3 No. 25) (USB6_7 br.9) A côté des quatre ports USB 2.0 par défaut sur le panneau E/S, il y a deux embases USB 2.0 sur cette carte mère. Chaque embase USB 2.0 peut prendre en charge 2 ports USB 2.0. (voir p.3 No. 24) 40 ASRock N73PV-S / N73V-S Motherboard Embase de port d’impression AIl s’agit d’une interface pour le câble du port d’impression, qui permet le raccordement pratique de périphériques d’impression. (LPT1 25 broches) (voir p.2/3 No. 16) Connecteurs audio internes (CD1 br. 4) (CD1: voir p.2/3 fig. 19) CD1 Connecteur audio panneau avant (HD_AUDIO1 br. 9) (voir p.2/3 fig. 18) Ils vous permettent de gérer des entrées audio à partir de sources stéréo comme un CD-ROM, DVD-ROM, un tuner TV ou une carte MPEG. C’est une interface pour un câble audio en façade qui permet le branchement et le contrôle commodes de périphériques audio. F ran çais rançais 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système. 2. Si vous utilisez le panneau audio AC’97, installez-le sur l’adaptateur audio du panneau avant conformément à la procédure ci-dessous : A. Connectez Mic_IN (MIC) à MIC2_L. B. Connectez Audio_R (RIN) à OUT2_R et Audio_L (LIN) à OUT2_L. C. Connectez Ground (GND) à Ground (GND). D. MIC_RET et OUT_RET sont réservés au panneau audio HD. Vous n’avez pas besoin de les connecter pour le panneau audio AC’97. E. Entrer dans l’utilitaire de configuration du BIOS. Saisir les Paramètres avancés puis sélectionner Configuration du jeu de puces. Définir l’option panneau de commande de [Auto] à [Activé]. F. Entrer dans le système Windows. Cliquer sur l’icône sur la barre de tâches dans le coin inférieur droite pour entrer dans le Gestionnaire audio Realtek HD. Pour Windows® XP / XP 64-bit OS: Cliquer sur « E/S audio», sélectionner « Paramètres du connecteur » , choisir « Désactiver la détection de la prise du panneau de commande » et sauvegarder les changements en cliquant sur « OK ». Pour Windows® VistaTM / VistaTM 64-bit OS: Cliquer droit “Fichier” icone , selectionner” la detection incapable de jack de panel d’avant “ et sauvegarder le changement par cliquer”ok”. ASRock N73PV-S / N73V-S Motherboard 41 Connecteur pour panneau Ce connecteur offre plusieurs fonctions système en façade. (PANEL1 br. 9) (voir p.2/3 fig. 14) Connecteur du haut-parleur du châssis Veuillez connecter le hautparleur de châssis sur ce connecteur. (SPEAKER1 br. 4) (voir p.2/3 fig. 15) Connecteur pour ventilateur de châssis Veuillez connecter le câble du ventilateur du châssis sur ce (CHA_FAN1 br. 3) connecteur en branchant le fil noir sur la broche de terre. (voir p.2/3 fig. 9) Connecteur pour ventilateur CPU (CPU_FAN1 br. 4) Veuillez connecter un câble de ventilateur d’UC sur ce connecteur et brancher le fil noir sur la broche de terre. 1 2 3 4 (voir p.2/3 fig. 4) ien que cette carte mère offre un support de (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur. Si vous prévoyez de connecter le ventilateur de CPU à 3 broches au connecteur du ventilateur de CPU sur cette carte mère, veuillez le connecter aux broches 1-3. Installation de ventilateur à 3 broches Broches 1-3 connectées Connecteur d’alimentation ATX 12 24 1 13 (ATXPWR1 br. 24) (voir p.2/3 fig. 6) Veuillez connecter une unité d’alimentation ATX sur ce connecteur. F rançais Bien que cette carte mère fournisse un connecteur de courant ATX 24 broches, elle peut encore fonctionner si vous adopter une alimentation traditionnelle ATX 20 broches. Pour utiliser une alimentation ATX 20 broches, branchez à l’alimentation électrique ainsi qu’aux broches 1 et 13. 20-Installation de l’alimentation électrique ATX 42 ASRock N73PV-S / N73V-S Motherboard 12 24 1 13 Connecteur d’alimentation 12V ATX (ATX12V1 br. 4) (voir p.2 fig. 27 ou p.3 fig. 26) 2. Informations sur le BIOS La puce Flash Memory sur la carte mère stocke le Setup du BIOS. Lorsque vous démarrez l’ordinateur, veuillez presser <F2> pendant le POST (Power-On-SelfTest) pour entrer dans le BIOS; sinon, le POST continue ses tests de routine. Si vous désirez entrer dans le BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant. L’utilitaire d’installation du BIOS est conçu pour être convivial. C’est un programme piloté par menu, qui vous permet de faire défiler par ses divers sous-menus et de choisir parmi les choix prédéterminés. Pour des informations détaillées sur le BIOS, veuillez consulter le Guide de l’utilisateur (fichier PDF) dans le CD technique. 3. Informations sur le CD de support s 12 24 1 13 F ran çais rançais Cette carte mère supporte divers systèmes d’exploitation Microsoft® Windows®: XP / XP 64 bits / VistaTM / VistaTM 64 bits. Le CD technique livré avec cette carte mère contient les pilotes et les utilitaires nécessaires pour améliorer les fonctions de la carte mère. Pour utiliser le CD technique, insérez-le dans le lecteur de CDROM. Le Menu principal s’affiche automatiquement si “AUTORUN” est activé dans votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier “ASSETUP.EXE” dans le dossier BIN et doublecliquez dessus pour afficher les menus. ctées TX Veuillez noter qu’il est nécessaire de connecter une unité d’alimentation électrique avec prise ATX 12V sur ce connecteur afin d’avoir une alimentation suffisante. Faute de quoi, il ne sera pas possible de mettre sous tension. 43 ASRock N73PV-S / N73V-S Motherboard 1. Introduzione Grazie per aver scelto una scheda madre ASRock N73PV-S / N73V-S, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione. Informazioni più dettagliate sulla motherboard si possono trovare nel manuale per l’utente presente nel CD di supporto. Le specifiche della scheda madre e il software del BIOS possono essere aggiornati, pertanto il contenuto di questo manuale può subire variazioni senza preavviso. Nel caso in cui questo manuale sia modificato, la versione aggiornata sarà disponibile sul sito di ASRock senza altro avviso. Sul sito ASRock si possono anche trovare le più recenti schede VGA e gli elenchi di CPU supportate. ASRock website http://www.asrock.com Se si necessita dell’assistenza tecnica per questa scheda madre, visitare il nostro sito per informazioni specifiche sul modello che si sta usando. www.asrock.com/support/index.asp 1.1 Contenuto della confezione Scheda madre ASRock N73PV-S / N73V-S (Micro ATX Form Factor: 9.6-in x 7.0-in, 24.4 cm x 17.8 cm) Guida di installazione rapida ASRock N73PV-S / N73V-S CD di supporto ASRock N73PV-S / N73V-S Un cavo IDE 80-pin Ultra ATA 66/100/133 (opzionali) Un cavi dati Serial ATA (SATA) (opzionali) Un cavi di alimentazione HDD Serial ATA (SATA) (opzionali) Un I/O Shield Italiano 44 ASRock N73PV-S / N73V-S Motherboard 1 . 2 Specifiche Chipset Memoria Slot di espansione VGA su scheda Audio LAN Pannello posteriore I/O Connettori - Micro ATX Form Factor: 9.6-in x 7.0-in, 24.4 cm x 17.8 cm - LGA 775 per Intel® CoreTM 2 Extreme / CoreTM 2 Quad / CoreTM 2 Duo / Pentium® Dual Core / Celeron® Dual Core / Celeron® in grado di supportare processori Quad Core Yorkfield e Dual Core Wolfdale - FSB1333/1066/800/533MHz - Supporto tecnologia Hyper Threading (vedi ATTENZIONE 1) - Supporta la tecnologia overclocking “slegata” (vedi ATTENZIONE 2) - Supporto CPU EM64T - NVIDIA® GeForce 7100 / nForce 630i (N73PV-S) - NVIDIA® GeForce 7050 / nForce 610i (N73V-S) - 2 x slot DDR2 DIMM - Supporta DDR2 800/667/533 non-ECC, momoria senza buffer - Capacità massima della memoria di sistema: 16GB (vedi ATTENZIONE 3) - 1 x slot PCI Express x16 - 1 x slot PCI Express x1 - 2 x slot PCI - Scheda NVIDIA® GeForce 7100 (N73PV-S) - Scheda NVIDIA® GeForce 7050 (N73V-S) - VGA DX9.0, Pixel Shader 3.0 - Memoria massima condivisa 256MB (vedi ATTENZIONE 4) - 5.1 Audio HD CH Windows® VistaTM Premium Level (ALC662 Audio Codec) - Realtek PHY RTL8201EL - Velocità: 10/100 Ethernet - Supporta Wake-On-LAN I/O Panel - 1 x Porta PS/2 per mouse - 1 x Porta PS/2 per tastiera - 1 x Porta COM - 1 x Porta VGA - 4 x Porte USB 2.0 già integrate - 1 x porta LAN RJ-45 con LED (LED azione/collegamento e LED velocità) - Connettore HD Audio: ingresso linea / cassa frontale / microfon - 4 x connettori SATAII 3.0Go/s, sopporta RAID (RAID 0, RAID 1, RAID 0+1, JBOD e RAID 5), NCQ, AHCI e “Collegamento a caldo” (vedi ATTENZIONE 5) * Le funzioni RAID 0+1 e RAID 5sono disponibili solamente per N73PV-S ASRock N73PV-S / N73V-S Motherboard Italiano Piattaforma Processore 45 BIOS - 1 x connettori ATA133 IDE (supporta fino a 2 dispositivi IDE) - 1 x porta Floppy - 1 x Collettore porta stampante - Connettore ventolina CPU/telaio - 24-pin collettore alimentazione ATX - 4-pin connettore ATX 12V - Connettori audio interni - Connettore audio sul pannello frontale - Header 3 x USB 2.0 (supporto porte 6 USB 2.0) (N73PV-S) (vedi ATTENZIONE 6) - Header 2 x USB 2.0 (supporto porte 4 USB 2.0) (N73V-S) (vedi ATTENZIONE 6) - 4Mb AMI BIOS - Suppor AMI legal BIOS - Supporta “Plug and Play” - Compatibile con ACPI 1.1 wake up events - Supporta jumperfree - Supporta SMBIOS 2.3.1 - Smart BIOS supportato - Driver, utilità, software antivirus (Versione dimostrativa) Italiano CD di supporto Caratteristica - Sintonizzatore ASRock OC (vedi ATTENZIONE 7) speciale - Intelligent Energy Saver (Risparmio intelligente dell’energia) (vedi ATTENZIONE 8) - Instant Boot - Booster ibrido: - Stepless control per frequenza del processore (vedi ATTENZIONE 9) - ASRock U-COP (vedi ATTENZIONE 10) - Boot Failure Guard (B.F.G.) Monitor- Sensore per la temperatura del processore aggio - Sensore temperatura scheda madre Hardware - Indicatore di velocità per la ventola del processore - Indicatore di velocità per la ventola di raffreddamento - Ventola CPU silenziosa - Voltaggio: +12V, +5V, +3.3V, Vcore Compatibi- - Microsoft® Windows® XP / XP 64 bit / VistaTM / VistaTM 64 bit lità SO Certificazioni - FCC, CE * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com 46 ASRock N73PV-S / N73V-S Motherboard AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può influenzare la stabilità del sistema, ed anche provocare danni ai componenti ed alle periferiche del sistema. La procedura è eseguita a proprio rischio ed a proprie spese. Noi non possiamo essere ritenuti responsabili per possibili danni provocati dall’overclocking. ATTENZIONE! 2. 3. 4. 5. 6. 7. 8. 9. Per il settaggio della “Tecnologia Hyper-Threading”, per favore controllare pagina 39 del Manuale dell’utente all’interno del CD di supporto. Questa scheda madre supporta la tecnologia overclocking “slegata”. Per i dettagli leggere “Tecnologia di Untied Overclocking” a pagina 21. A causa delle limitazioni del sistema operativo, le dimensioni effettive della memoria possono essere inferiori a 4GB per l’accantonamento riservato all’uso del sistema sotto Windows® XP e Windows® VistaTM. Per Windows® XP 64-bit e Windows® VistaTM 64-bit con CPU 64-bit, non c’è tale limitazione. La dimensione massima della memoria condivisa viene stabilita dal venditore del chipset ed e‘ soggetta a modificazioni. Prego fare riferimento al sito internet NVIDIA® per le ultime informazioni. Prima di installare il disco rigido SATAII al connettore SATAII, leggere la “Guida di installazione del disco rigido SATAII” a pagina 24 per regolare l’unità disco SATAII in modalità SATAII. Si può anche connettere il disco rigido SATA al connettore SATAII direttamente. La Gestione Risorse per USB 2.0 funziona perfettamente con Microsoft® Windows® VistaTM 64-bit / VistaTM / XP 64 bit / XP SP1; SP2. Si tratta di uno strumento di sicronizzazione ASRock di face uso in grado di implementare il controllo del sistema tramite la funzione di hardware monitor e sincronizzare le Vostre unita‘ hardware per ottenere la migliore prestazione in Windows?. Prego visitare il nostro sito Internet per ulteriori dettagli circa l‘uso del Sintonizzatore ASRock OC. ASRock website: http://www.asrock.com Anche se questa motherboard offre il controllo stepless, non si consiglia di effettuare l’overclocking. Frequenze del bus del processore diverse da quelle raccomandate possono causare instabilità al sistema o danni al processore e alla scheda madre. Dotato di un design avanzato e brevettato dell’hardware e del software, Intelligent Energy Saver è una tecnologia rivoluzionaria che offre un risparmio energetico senza pari. In altre parole: è capace di fornire un risparmio energetico eccezionale e di migliorare l’efficienza senza sacrificare le prestazioni di computazione. Visitare il nostro sito per informazioni sulle procedure operative di Intelligent Energy Saver. Sito ASRock: http://www.asrock.com Italiano 1. 47 ASRock N73PV-S / N73V-S Motherboard 10. Se il processore si surriscalda, il sistema si chiude automaticamente. Prima di riavviare il sistema, assicurarsi che la ventolina CPU della scheda madre funzioni correttamente; scollegare e ricollegare il cavo d’alimentazione. Per migliorare la dissipazione del calore, ricordare di applicare l’apposita pasta siliconica tra il processore e il dissipatore quando si installa il sistema. 1.3 Setup dei Jumpers L’illustrazione mostra come sono settati i jumper. Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO posizionato su questi pin. Jumper PS2_USB_PW1 APERTO Settaggio del Jumper Cortocircuitare pin2, pin3 per settare a +5VSB (standby) e abilitare PS/2 o USB wake up events. Nota: Per selezionare +5VSB, si richiedono almeno 2 Ampere e il consumo di corrente in standby sarà maggiore. (vedi p.2/3 item 1) Resettare la CMOS (CLRCMOS1) (vedi p.2/3 item 10) Impostazione predefinita Azzeramento CMOS Italiano Nota: CLRCMOS1 permette di cancellare i dati presenti nel CMOS. I dati del CMOS comprendono le informazioni di configurazione quali la password di sistema, data, ora, e i parametri di configurazione del sistema. Per cancellare e ripristinare i parametri del sistema, spegnere il computer e togliere il cavo di alimentazione dalla presa di corrente. Dopo aver lasciato trascorrere 15 secondi, utilizzare un cappuccio jumper per cortocircuitare i pin 2 e 3 su CLRCMOS1 per 5 secondi. Dopo aver cortocircuitato il jumper Clear CMOS jumper, togliere il terminatore jumper. Non cancellare la CMOS subito dopo aver aggiornato il BIOS. Se è necessario cancellare la CMOS una volta completato l’aggiornamento del BIOS, è necessario riavviare prima il sistema, e poi spegnerlo prima di procedere alla cancellazione della CMOS. 48 ASRock N73PV-S / N73V-S Motherboard 1.4 Connettori I connettori NON sono jumpers. NON COLLOCARE i ponticelli sui connettori. Installando dei cappucci a ponticello sui connettori si causeranno danni permanenti alla scheda madre! Connettori Connettore del Floppy disk Descrizione dei connettori (33-pin FLOPPY1) (vedi p.2/3 item 17) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2/3 item 7) Connettore blu alla scheda madre Connettore nero all’hard disk drive Cavo ATA 66/100/133 a 80 pin Nota: Fate riferimento alle istruzioni del produttore del dispositivo IDE per maggiori dettagli. (SATAII_1: vedi p.2/3 Nr. 8) (SATAII_2: vedi p.2/3 Nr. 13) (SATAII_3: vedi p.2/3 Nr. 11) SATAII_1 SATAII_3 SATAII_2 SATAII_4 (SATAII_4: vedi p.2/3 Nr. 12) Cavi dati Serial ATA (SATA) (Opzionale) Questi quattro connettori Serial ATA (SATAII) supportano le periferiche di archiviazione HD SATA o SATAII per le funzioni di archiviazione interna. ATAII (SATAII) supportano cavi SATAII per dispositivi di memoria interni. L’interfaccia SATAII attuale permette velocità di trasferimento dati fino a 3.0 Gb/s. Italiano Connettori Serial ATAII Una o altra estremità del cavo di dati SATA può essere collegata al disco rigido SATA / SATAII o al connettore di SATAII su questa cartolina base. 49 ASRock N73PV-S / N73V-S Motherboard Cavo d’alimentazione Serial ATA (SATA) (Opzionale) Connettere all’ailmentazione dei dischi SATA Connettere al gruppo di alimentazione N73PV-S: Collettore USB 2.0 (9-pin USB4_5) (vedi p.2 No. 26) Collegare l’estremità nera de cavo di alimentazione SATA al connettore di alimentazione del drive. Poi connettete l’estremità bianca del cavo di alimentazione SATA al connettore power dell’alimentatore. Oltre alle quattro porte USB 2.0 predefinite nel pannello I/O, la scheda madre dispone di tre intestazioni USB 2.0. Ciascuna intestazione USB 2.0 supporta due porte USB 2.0. (9-pin USB6_7) (vedi p.2 No. 25) (9-pin USB8_9) (vedi p.2 No. 24) N73V-S: Collettore USB 2.0 (9-pin USB4_5) (vedi p.3 No. 25) Oltre alle quattro porte USB 2.0 predefinite nel pannello I/O, la scheda madre dispone di due intestazioni USB 2.0. Ciascuna intestazione USB 2.0 supporta due porte USB 2.0. Italiano (9-pin USB6_7) (vedi p.3 No. 24) 50 ASRock N73PV-S / N73V-S Motherboard Collettore porta stampante Questa è un’interfaccia per il cavo porta stampante che consente di collegare, con comodità, dispositivi di stampa. (LPT1 25 pin) (vedi p.2/3 No. 16) Connettori audio interni (4-pin CD1) (CD1: vedi p.2/3 item 19) CD1 Connettore audio sul pannello frontale (9-pin HD_AUDIO1) (vedi p.2/3 item 18) Permettono di ricevere input stereo audio da fonti di suono come CD-ROM, DVD ROM,TV tuner, o schede MPEG. È un’interfaccia per il cavo del pannello audio. Che consente connessione facile e controllo dei dispositivi audio. Italiano 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema. 2. Se si utilizza un pannello audio AC’97, installarlo nell’intestazione audio del pannello anteriore, come indicato di seguito: A. Collegare Mic_IN (MIC) a MIC2_L. B. Collegare Audio_R (RIN) a OUT2_R e Audio_L (LIN) ad OUT2_L. C. Collegare Ground (GND) a Ground (GND). D. MIC_RET e OUT_RET sono solo per il pannello audio HD. Non è necessario collegarli per il pannello audio AC’97. E. Entrare nel programma di impostazione BIOS. Entrare su Impostazioni avanzate, quindi selezionare Configurazione chipset. Impostare l’opzione Comando pannello anteriore da [Auto] a [Attivato]. F. Entrare nel sistema di Windows. Fare clic sull’icona situata nell’angolo inferiore destro della barra delle applicazioni per entrare su Realtek HD Audio Manager. Per Windows® XP / XP 64-bit OS: Fare clic su “Audio I/O”, selezionare “Impostazioni connettore” , scegliere “Disattiva rilevazione presa pannello anteriore” e salvare la modifica facendo clic su “OK”. 51 ASRock N73PV-S / N73V-S Motherboard Per Windows® VistaTM / VistaTM 64-bit OS: Cliccare sull‘icona in alto a destra “Folder” (“Cartella”) , selezionare “Disable front panel jack detection” “Disabilitare individuazione presa pannello frontale”) e cliccare “OK” per memorizzare. Connettore del panello frontale Questo connettore accoglie diverse funzioni del pannello frontale. (9-pin PANEL1) (vedi p.2/3 item 14) Collettore casse telaio Collegare le casse del telaio a questo collettore. (4-pin SPEAKER1) (vedi p.2/3 item 15) Connettore ventolina telaio Collegare il cavo della ventolina telaio a questo connettore e far combaciare il filo nero al pin terra. (3-pin CHA_FAN1) (vedi p.2/3 item 9) Connettore ventolina CPU Collegare il cavo della ventolina CPU a questo connettore e far combaciare il filo nero al pin terra. 1 2 3 4 (4-pin CPU_FAN1) (vedi p.2/3 item 4) Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3. Piedini 1-3 collegati Installazione della ventola a 3 piedini Italiano Collettore alimentazione ATX 12 24 1 13 (24-pin ATXPWR1) (vedi p.2/3 item 6) Collegare la sorgente d’alimentazione ATX a questo collettore. 52 ASRock N73PV-S / N73V-S Motherboard iedini 12 24 Installazione dell’alimentatore ATX a 20 pin 1 13 ATX a 20 pin, collegare l’alimentatore con il Pin 1 e il Pin 13. Connettore ATX 12V (4-pin ATX12V1) (vedi p.2 item 27 o p.3 item 26) È necessario collegare una alimentazione con spinotto da 12V ATX a questo connettore in modo che possa fornire energia sufficiente. In caso contrario l’unità non si avvia. 2. Informazioni sul BIOS La Flash Memory sulla scheda madre contiene le Setup Utility. Quando si avvia il computer, premi <F2> durante il Power-On-Self-Test (POST) della Setup utility del BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. Per informazioni più dettagliate circa il Setup del BIOS, fare riferimento al Manuale dell’Utente (PDF file) contenuto nel cd di supporto. 3. Software di supporto e informazioni su CD Questa scheda madre supporta vari sistemi operativi Microsoft® Windows®: XP / XP 64-bit / VistaTM / Vista TM 64-bit. Il CD di supporto a corredo della scheda madre contiene i driver e utilità necessari a potenziare le caratteristiche della scheda. Inserire il CD di supporto nel lettore CD-ROM. Se la funzione “AUTORUN” è attivata nel computer, apparirà automaticamente il Menù principale. Se il Menù principale non appare automaticamente, posizionarsi sul file “ASSETUP.EXE” nel CESTINO del CD di supporto e cliccare due volte per visualizzare i menù. Italiano ati Con questa scheda madre, c’è in dotazione un connettore elettrico ATX a 24 pin, ma può funzionare lo stesso se si adotta un alimentatore ATX a 20 pin. Per usare l’alimentatore 53 ASRock N73PV-S / N73V-S Motherboard 1. Introducción Gracias por su compra de ASRock N73PV-S / N73V-S placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte. Porque las especificaciones de la placa madre y el software de BIOS podrían ser actualizados, el contenido de este manual puede ser cambiado sin aviso. En caso de cualquier modificación de este manual, la versión actualizada estará disponible en el website de ASRock sin previo aviso. También encontrará las listas de las últimas tarjetas VGA y CPU soportadas en la página web de ASRock. Website de ASRock http://www.asrock.com Si necesita asistencia técnica en relación con esta placa base, visite nuestra página web con el número de modelo específico de su placa. www.asrock.com/support/index.asp 1.1 Contenido de la caja Placa base ASRock N73PV-S / N73V-S (Factor forma Micro ATX: 24,4 cm x 17,8 cm, 9,6” x 7,0”) Guía de instalación rápida de ASRock N73PV-S / N73V-S CD de soporte de ASRock N73PV-S / N73V-S Una cinta de datos IDE de conducción 80 Ultra ATA 66/100/133 (Opcional) Un Cable de Datos Serial ATA (SATA) (Opcional) Un cable serie ATA (SATA) de alimentación de disco duro (Opcional) Una protección I/O Español 54 ASRock N73PV-S / N73V-S Motherboard 1.2 Especificación Chipset Memoria Ranuras de Expansión VGA OnBoard Audio LAN Entrada/Salida de Panel Trasero - Factor forma Micro ATX: 24,4 cm x 17,8 cm, 9,6” x 7,0” - LGA 775 para Intel® CoreTM 2 Extreme / CoreTM 2 Quad / CoreTM 2 Duo / Pentium® Dual Core / Celeron® Dual Core / Celeron®, con soporte para los procesadores Quad Core Yorkfield y Dual Core Wolfdale - FSB1333/1066/800/533MHz - Admite tecnología Hyper Threading (ver ATENCIÓN 1) - Admite tecnología de aumento de velocidad liberada (vea ATENCIÓN 2) - Admite CPU EM64T - NVIDIA® GeForce 7100 / nForce 630i (N73PV-S) - NVIDIA® GeForce 7050 / nForce 610i (N73V-S) - 2 x DDR2 DIMM slots - Apoya DDR2 800/667/533 non-ECC, memoria de un-buffered - Máxima capacidad de la memoria del sistema: 16GB (vea ATENCIÓN 3) - 1 x ranuras PCI Express x16 - 1 x ranuras PCI Express x1 - 2 x ranuras PCI - Integrada de NVIDIA® GeForce 7100 (N73PV-S) - Integrada de NVIDIA® GeForce 7050 (N73V-S) - VGA DX9.0, Sombreador de Píxeles 3.0 - 256MB de Memoria máxima compartida (vea ATENCIÓN 4) - Sonido HD de Nivel Superior 5.1 Canales Windows® VistaTM (Códec de sonido ALC662) - Realtek PHY RTL8201EL - Velocidad: 10/100 Ethernet - Soporta Wake-On-LAN I/O Panel - 1 x puerto de ratón PS/2 - 1 x puerto de teclado PS/2 - 1 x puerto serial: COM1 - 1 x Puerto VGA - 4 x puertos USB 2.0 predeterminados - 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y LED de VELOCIDAD) - Conexión de HD audio: Entrada de línea / Altavoz frontal / Micrófono Español Plataforma Procesador 55 ASRock N73PV-S / N73V-S Motherboard Conectores - 4 x conexiones SATAII, admiten una velocidad de transferencia de datos de hasta 3,0Gb/s, soporta RAID (RAID 0, RAID 1, RAID 0+1, JBOD y RAID 5), NCQ, AHCI y “Conexión en caliente” (vea ATENCIÓN 5) * Las funciones RAID 0+1 y RAID 5 solamente son para N73PV-S BIOS CD de soport Característica Única Español Monitor Hardware - 1 x ATA133 conexiones IDE (admite hasta 2 dispositivos IDE) - 1 x puerto Floppy - 1 x cabecera de puerto de impresora - Conector del ventilador del CPU/chasis - 24-pin cabezal de alimentación ATX - 4-pin conector de ATX 12V power - Conector de Audio Interno - Conector de audio de panel frontal - 3 x Cabezal USB 2.0 (admite 6 puertos USB 2.0 adicionales) (N73PV-S) (vea ATENCIÓN 6) - 2 x Cabezal USB 2.0 (admite 4 puertos USB 2.0 adicionales) (N73V-S) (vea ATENCIÓN 6) - 4Mb AMI BIOS - AMI legal BIOS - Soporta “Plug and Play” - ACPI 1.1 compliance wake up events - Soporta “jumper free setup” - Soporta SMBIOS 2.3.1 - Compatible con Smart BIOS - Controladores, Utilerías, Software de Anti Virus (Versión de prueba) - Sintonizador de ASRock OC (vea ATENCIÓN 7) - Administrador de energía inteligente (vea ATENCIÓN 8) - Instant Boot - Amplificador Híbrido: - Stepless control de frecuencia de CPU (vea ATENCIÓN 9) - ASRock U-COP (vea ATENCIÓN 10) - Protección de Falla de Inicio (B.F.G..) - Sensibilidad a la temperatura del procesador - Sensibilidad a la temperatura de la placa madre - Taquímetros de los ventiladores del procesador y del procesador - Taquímetros de los ventiladores del procesador y del chasis - Ventilador silencioso para procesador - Monitor de Voltaje: +12V, +5V, +3.3V, Vcore 56 ASRock N73PV-S / N73V-S Motherboard OS Certificaciones - En conformidad con Microsoft® Windows® XP / XP 64 bits / VistaTM / VistaTM 64 bits - FCC, CE * Para más información sobre los productos, por favor visite nuestro sitio web: http://www.asrock.com ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes. El aumento de la velocidad puede afectar a la estabilidad del sistema e, incluso, dañar los componentes y dispositivos del sistema. Esta operación se debe realizar bajo su propia responsabilidad y Ud. debe asumir los costos. No asumimos ninguna responsabilidad por los posibles daños causados por el aumento de la velocidad del reloj. ATENCIÓN ! 2. 3. 4. 5. 6. 7. 8. Por favor consulte página 39 del Manual del Usuario en el soporte CD sobre la configuración de Hyper-Threading Technology. Esta placa base admite la tecnología de aumento de velocidad liberada. Por favor lea “Tecnología de Forzado de Reloj (Overclocking) no relacionado” en la página 21 para obtener detalles. Debido a las limitaciones del sistema, el tamaño real de la memoria debe ser inferior a 4GB para que el sistema pueda funcionar bajo Windows® XP y Windows® VistaTM. Para equipos con Windows® XP 64-bit y Windows® VistaTM 64-bit con CPU de 64-bit, no existe dicha limitación. El tamaño de la memoria compartido máximo es definido por el vendedor del chipset y está conforme al cambio. Por favor compruebe el Web site de NVIDIA® para la información más última. Antes de instalar el disco duro SATAII en el conector SATAII, por favor lea la “Guía de Configuración de Disco Duro SATAII” en la página 24 para ajustar su unidad de disco duro SATAII al modo SATAII. También puede conectar el disco duro SATA al conector SATAII directamente. Power Management para USB 2.0 funciona bien bajo Microsoft® Windows® VistaTM 64 bits / VistaTM / XP 64 bits / XP SP1; SP2. Es una herramienta de overclocking de ASRock de usuario-fácil que le permite a supervisar su sistema por la función de monitor de hardware y overclock sus dispositivos de hardware para obtener el mejor funcionamiento del sistema bajo el entorno de Windows®. Por favor visite nuestro sitio web para los procedimientos de operación de Sintonizador de ASRock OC. Sitio web de ASRock: http://www.asrock.com Contiene avanzado hardware y diseño de software de propietario. Intelligent Energy Saver es una revolucionaria tecnología que consigue ahorros de energía sin rival. En otras palabras, permite alcanzar un nivel de ahorro de energía excepcional y mejorar la Español 1. 57 ASRock N73PV-S / N73V-S Motherboard eficiencia energética sin sacrificar el rendimiento del procesador. Visite nuestro sitio web para más información acerca del funcionamiento de Intelligent Energy Saver. Sitio web de ASRock: http://www.asrock.com 9. Aunque esta placa base ofrece un control complete, no es recomendable forzar la velocidad. Las frecuencias de bus de la CPU distintas a las recomendadas pueden causar inestabilidad en el sistema o dañar la CPU. 10. Cuando la temperatura de CPU está sobre-elevada, el sistema va a apagarse automaticamente. Antes de reanudar el sistema, compruebe si el ventilador de la CPU de la placa base funciona apropiadamente y desconecte el cable de alimentación, a continuación, vuelva a conectarlo. Para mejorar la disipación de calor, acuérdese de aplicar thermal grease entre el procesador y el disipador de calor cuando usted instala el sistema de PC. 1.3 Setup de Jumpers La siguiente ilustración muestra setup de Jumpers. Cuando el jumper cap está colocado sobre los pins, el jumper está “SHORT”. Si ningun jumper cap está colocado sobre los pins, el jumper está “OPEN”. La ilustración muestra un jumper de 3-pin cuyo pin1 y pin2 están “SHORT” cuando el jumper cap está colocado sobre estes 2 pins. Jumper PS2_USB_PWR1 Short Open Setting Descripción Ponga en cortocircuito pin 2, (vea p.2/3, N. 1) pin 3 para habilitar +5VSB (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS Español (CLRCMOS1, jumper de 3 pins) (vea p.2/3, N. 10) Valor predeterminado Restablecimiento de la CMOS Atención: CLRCMOS1 permite que Usted limpie los datos en CMOS. Los datos en CMOS incluyen informaciones de la configuración del sistema, tales como la contraseña del sistema, fecha, tiempo, y parámetros de la configuración del sistema. Para limpiar y reconfigurar los parametros del sistema a la configuración de la fábrica, por favor apague el computador y desconecte 58 ASRock N73PV-S / N73V-S Motherboard el cable de la fuente de electricidad, utilice una cubierta de jumper para aislar las agujas pin2 y pin3 en CLRCMOS1 durante 5 segundos. Por favor acuérdase de quitar el jumper cap después de limpiar el COMS. Por favor acuérdase de quitar el jumper cap después de limpiar el COMS. Si necesita borrar la CMOS cuando acabe de finalizar la actualización de la BIOS, debe arrancar primero el sistema y, a continuación, apagarlo antes de realizar la acción de borrado de CMOS. 1.4 Cabezales y Conectores en Placas Los conectores y cabezales en placa NO son puentes. NO coloque las cubiertas de los puentes sobre estos cabezales y conectores. El colocar cubiertas de puentes sobre los conectores y cabezales provocará un daño permanente en la placa base. Conector de disquetera (33-pin FLOPPY1) (vea p.2/3, N. 17) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (Azul) (39-pin IDE1, vea p.2/3, N. 7) Conector azul a placa madre Conector negro a aparato IDE Cable ATA 66/100/133 de conducción 80 Conexiones de serie ATAII Estos cuatro conectores de la (SATAII_1: vea p.2/3, N. 8) Serie ATA (SATAII) soportan HDDs SATA o SATAII para dispositivos de almacenamiento interno. La interfaz SATAII actual permite una velocidad de transferencia de 3.0 Gb/s. (SATAII_2: vea p.2/3, N. 13) (SATAII_3: vea p.2/3, N. 11) (SATAII_4: vea p.2/3, N. 12) SATAII_1 SATAII_3 SATAII_2 SATAII_4 Español Atención: Consulte las instrucciones del distribuidor del dispositivo IDE para conocer los detalles. 59 ASRock N73PV-S / N73V-S Motherboard Cable de datos de serie ATA (SATA) Ambos extremos del cable pueden conectarse al disco duro SATA / SATAII o la conexión de la placa base. (Opcional) Cable de alimentación de serie ATA (SATA) (Opcional) Conectar a la conexión de alimentación del disco duro SATA N73PV-S: Cabezal USB 2.0 (9-pin USB4_5) (ver p.2, No. 26) (9-pin USB6_7) Conectar a la fuente de alimentación Conecte el extremo negro del cable de alimentación SATA en la conexión de alimentación de cada unidad. A continuación, conecte el extremo blanco del cable de alimentación SATA a la conexión de alimentación de la fuente de alimentación. Además de cuatro puertos USB 2.0 predeterminados en el panel de E/S, hay tres bases de conexiones USB 2.0 en esta placa base. Cada una de estas bases de conexiones admite dos puertos USB 2.0. (ver p.2, No. 25) (9-pin USB8_9) (ver p.2, No. 24) N73V-S: Cabezal USB 2.0 (9-pin USB4_5) Español (ver p.3, No. 25) (9-pin USB6_7) Además de cuatro puertos USB 2.0 predeterminados en el panel de E/S, hay dos bases de conexiones USB 2.0 en esta placa base. Cada una de estas bases de conexiones admite dos puertos USB 2.0. (ver p.3, No. 24) 60 ASRock N73PV-S / N73V-S Motherboard Cabecera de puerto de impresora Esta es una interfaz de puerto para cable de impresora que permite conectar cómodamente dispositivos de impresión. (LPT1 de 25 terminales) (vea p.2/3, N. 16) Conector de audio interno (4-pin CD1) (CD1: vea p. 2/3, N. 19) CD1 Conector de audio de panel frontal (9-pin HD_AUDIO1) (vea p.2/3, N. 18) Permite recepción de input audio de fuente sónica como CDROM, DVD-ROM, TV tuner, o tarjeta MPEG. Este es una interface para cable de audio de panel frontal que permite conexión y control conveniente de apparatos de Audio. Español 1. El Audio de Alta Definición soporta la detección de conector, pero el cable de panel en el chasis debe soportar HDA para operar correctamente. Por favor, siga las instrucciones en nuestro manual y en el manual de chasis para instalar su sistema. 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L. B. Conecte Audio_R (RIN) a OUT2_R y Audio_L (LIN) en OUT2_L. C. Conecte Ground (GND) a Ground (GND). D. MIC_RET y OUT_RET son sólo para el panel de sonido HD. No necesitará conectarlos al panel de sonido AC’97. E. Entre en la Utilidad de configuración del BIOS Entre en Configuración avanzada y, a continuación, seleccione Configuración del conjunto de chips. En el panel de control frontal cambie la opción [Automático] a [Habilitado]. F. Entre en el sistema Windows. Haga clic en el icono de la barra de tareas situada en la parte inferior derecha para entrar en el Administrador de audio HD Realtek. Para Windows® XP / XP 64-bit OS: Haga clic en “E/S de audio”, seleccione “Configuración de conectores” , elija “Deshabilitar la detección del conector del panel frontal” y guarde el cambio haciendo clic en “Aceptar”. Para Windows® VistaTM / VistaTM 64-bit OS: Haga el clic el icono de la “Carpeta” de derecho-superior , eliga “Inhabilitable la detección del gato del panel delantero” y ahorre el cambio por chascando “OK”. ASRock N73PV-S / N73V-S Motherboard 61 Cabezal de panel de sistema Este cabezar acomoda varias dunciones de panel frontal de sistema. (9-pin PANEL1) (vea p.2/3, N. 14) Cabezal del altavoz del chasis Conecte el altavoz del chasis a su cabezal. (4-pin SPEAKER1) (vea p.2/3, N. 15) Conector del ventilador del chasis Conecte el cable del ventilador del chasis a este conector y haga coincidir el cable negro con el conector de tierra. (3-pin CHA_FAN1) (vea p.2/3, N. 9) Conector del ventilador de la CPU (4-pin CPU_FAN1) Conecte el cable del ventilador de la CPU a este conector y haga coincidir el cable negro con el conector de tierra. 1 2 3 4 (vea p.2/3, N. 4) Aunque esta placa base proporciona compatibilidad para un ventilador (silencioso) de procesador de 4 contactos, el ventilador de procesador de 3 contactos seguirá funcionando correctamente incluso sin la función de control de velocidad del ventilador. Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos Cabezal de alimentación ATX 12 24 1 13 (24-pin ATXPWR1) Conecte la fuente de alimentación ATX a su cabezal. (vea p.2/3, N. 6) Español 12 A pesar de que esta placa base incluye in conector de alimentación ATX de 24 pins, ésta puede funcionar incluso si utiliza una fuente de alimentación ATX de 20 pins tradicional. Para usar una fuente de alimentación ATX de 20 pins, por favor, conecte su fuente de alimentación usando los Pins 1 y 13. Instalación de una Fuente de Alimentación ATX de 20 Pins 62 ASRock N73PV-S / N73V-S Motherboard 1 24 13 Conector de ATX 12V power (4-pin ATX12V1) (ver p.2, No. 27o p.3, No. 26) 2. BIOS Información La utilidad de configuración de la BIOS se almacena en el chip BIOS FWH. Cuando se arranca el equipo, pulse <F2> durante la prueba automática de encendido (POST) para entrar en la Utilidad de la configuración de la BIOS, de lo contrario, POST continúa con sus rutinas de prueba. Si desea entrar en la Utilidad de configuración de la BIOS después de POST, reanude el sistema pulsando <Ctl>+ <Alt>+<Supr> o pulsando el botón de restauración situado en el chasis del sistema. Para obtener información detalladas sobre la Utilidad de configuración de la BIOS, consulte el Manual del usuario (archivo PDF), que se encuentra en el CD de soporte. 3.Información de Software Support CD Esta placa-base soporta diversos tipos de sistema operativo Windows®: XP / XP 64 bits / VistaTM / VistaTM 64 bits El CD de instalación que acompaña la placa-base trae todos los drivers y programas utilitarios para instalar y configurar la placa-base. Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo “ASSETUP.EXE” para iniciar la instalación. o actos ns Tenga en cuenta que es necesario conectar este conector a una toma de corriente con el enchufe ATX 12V, de modo que proporcione suficiente electricidad. De lo contrario no se podrá encender. 24 1 13 Español 12 63 ASRock N73PV-S / N73V-S Motherboard 1. Introdução Gratos por comprar nossa placa–mãe N73PV-S / N73V-S, um produto confiável feito com ASRock um estrito controle de qualidade consistente. Com um excelente desempenho, essa placa é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade. Este Guia de Instalação Rápida apresenta a placa-mãe e o guia de instalação passo a passo. Mais informações detalhadas sobre a placa-mãe podem ser encontradas no manual do usuário do CD de suporte. Porque as especificações da placa mãe e o software de BIOS poderiam ser atualizados, o conteúdo deste manual pode ser cambiado sem aviso. Em caso de qualquer modificação deste manual, a versão atualizada estará disponível no website de ASRock sem prévio aviso. Pode também encontrar as listas das mais recentes placas VGA e das CPUs suportadas no site da web da ASRock. Website de ASRock http://www.asrock.com Se precisar de apoio técnico em relação a este placa-mãe, por favor visite o nosso sítio da internet para informação específica acerca do modelo que está a utilizar. www.asrock.com/support/index.asp 1.1 Este pacote contém Placa-mãe ASRock N73PV-S / N73V-S (Formato Micro ATX: 9,6 pol. x 7,0 pol., 24,4 cm x 17,8 cm) Guia de instalação rápida da ASRock N73PV-S / N73V-S CD de suporte da placa ASRock N73PV-S / N73V-S Um cabo-fita IDE Ultra ATA 66/100/133 de 80 condutores (Opcional) Um cabo de dados ATA Serial (SATA) (Opcional) Um cabo de alimentação da unidade de disco rígido ATA Serial (SATA) (Opcional) Uma proteção I/O P or tuguês 74 ASRock N73PV-S / N73V-S Motherboard 1.2 Especificações Chipsets Memória Slots de Expansão VGA integrado Áudio LAN Entrada/Saída pelo painel traseiro Conectores - Formato Micro ATX: 9,6 pol. x 7,0 pol., 24,4 cm x 17,8 cm - Socket Intel® CoreTM 2 Extreme / CoreTM 2 Quad / CoreTM 2 Duo / Pentium® Dual Core / Celeron® Dual Core / Celeron® de 775 pinos com suporte para o processador Quad Core Yorkfield e Dual Core Wolfdale - FSB1333/1066/800/533MHz - Suporta a tecnologia Hyper-Threading (veja o AVISO 1) - Suporta a tecnologia Untied Overclocking (veja o AVISO 2) - Suporta a CPU EM64T - NVIDIA® GeForce 7100 / nForce 630i (N73PV-S) - NVIDIA® GeForce 7050 / nForce 610i (N73V-S) - 2 x slots de DDR2 DIMM - Suporte para memória não intermédia DDR2 800/667/ 533, não ECC - Capacidade máxima de memória do sistema: 16GB (veja o AVISO 3) - 1 x slots de PCI Express x16 - 1 x slots de PCI Express x1 - 2 x slots de PCI - Integrado NVIDIA® GeForce7100 (N73PV-S) - Integrado NVIDIA® GeForce7050 (N73V-S) - VGA DX9.0, Pixel Shader 3.0 - Memória partilhada máxima 256MB (veja o AVISO 4) - Áudio de alta definição de canal 5.1 através do Windows® VistaTM (Codec de áudio ALC662) - Realtek PHY RTL8201EL - Velocidade: 10 / 100 Ethernet - Suporta Wake-On-LAN I/O Panel - 1 x porta para mouse PS/2 - 1 x porta para teclado PS/2 - 1 x porta COM1 - 1 x porta VGA - 4 x portas USB 2.0 padrão - 1 x porta LAN RJ-45 com LED (LED ACT/LIG e LED VELOCIDADE) - HD Áudio Jack: Entrada de linha / Altifalante frontal / Microfone - 4 x conectores SATAII, suporte a taxa de transferência de dados de até 3,0 Gb/s, suporte RAID (RAID 0, RAID 1, P or tuguês Plataforma CPU 75 ASRock N73PV-S / N73V-S Motherboard RAID 0+1, JBOD e RAID 5), NCQ, AHCI e “conexão a quente” (veja o AVISO 5) * As funções RAID 0+1 e RAID 5 são apenas para o modelo N73PV-S BIOS CD de suporte Funcionalidade Única Monitor do HW P or tuguês Sistema Operacional Certificações 76 - 1 x conectores ATA133 IDE (suporta até 2 dispositivos IDE) - 1 x porta para disquete - 1 x Conector de Porta de Impressão - Conector do ventilador da CPU/chassis - Conector de força do ATX de 24 pinos - Conector ATX 12 V de 4 pinos - Conectores internos de áudio - Conector Áudio do painel frontal - 3 x cabezal USB 2.0 (suportar 6 portas USB 2.0 adicionais) (N73PV-S) (veja o AVISO 6) - 2 x cabezal USB 2.0 (suportar 4 portas USB 2.0 adicionais) (N73V-S) (veja o AVISO 6) - 4Mb BIOS AMI - BIOS AMI - Suporta dispositivos “Plug and Play” - ACPI 1.1 atendendo a eventos de “wake up” - Suporta dispositivos sem jumper - Suporte para SMBIOS 2.3.1 - Suporte para Smart BIOS - Controladores, utilitários, software antivírus (Experimentacao Versao) - Sintonizador ASRock OC (veja o AVISO 7) - Intelligent Energy Saver (veja o AVISO 8) - Instant Boot - Booster híbrido: - Frequência da CPU com controle contínuo (veja o AVISO 9) - ASRock U-COP (veja o AVISO 10) - B.F.G. (Boot Failure Guard) - Sensores de temperature do procesador - Medição de temperatura da placa-mãe - Tacômetros de ventilador do Processador - Tacômetros de ventilador do chassis - Ventoinha silenciosa para a CPU - Monitoramento de voltagem : +12 V, +5 V, +3.3 V, Vcore - Microsoft® Windows® XP / XP de 64 bits / VistaTM / VistaTM de 64 bits - FCC, CE * Para informações mais detalhadas por favor visite o nosso sítio Web: http://www.asrock.com ASRock N73PV-S / N73V-S Motherboard AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até mesmo causar danos ao nível dos componentes e dispositivos que integram o sistema. Esta operação é da total responsabilidade do utilizador. Não nos responsabilizamos pelos possíveis danos resultantes do overclocking. AVISO! 2. 3. 4. 5. 6. 7. 8. Sobre a configuração da “Tecnologia Hyper Threading”, consulte a página 39 do Manual do Usuário no CD de suporte. (Somente inglês) Esta placa principal suporta a tecnologia Untied Overclocking. Consulte a secção “Tecnologia Untied Overclocking” na página 21 para mais informações. Devido às limitações do sistema operativo, o tamanho real da memória pode ser inferior a 4 GB uma vez que uma parte desta está reservada para utilização pelo sistema operativo no âmbito do Windows® XP e do Windows® VistaTM. No caso da CPU de 64 bits do Windows® XP de 64 bits e do Windows® VistaTM de 64 bits, esta limitação não existe. O máximo tamanho de memória compartilhada é definido por vendedor de chipset e é sujeito a mudar. Verifique o NVIDIA® website para a última informação. Antes de instalar o disco duro SATAII no conector SATAII, por favor leia o “Guia de Instalação do Disco duro SATAII” na página 24 do Manual do Usuário no CD de suporte, para definir a sua unidade de disco duro SATAII com o modo SATAII. Também pode ligar directamente o disco duro SATA ao conector SATAII. Power Management para USB 2.0 funciona bem embaixo de Microsoft® Windows® VistaTM de 64 bits / VistaTM / XP de 64 bits / XP SP1; SP2. É uma ferramenta de overclocking da ASRock fácil de utilizar que lhe permite vigiar i seu sistema via a função de monitorização de hardware e proceder ao overclock dos dispositivos de hardware para obter o melhor desempenho em ambiente Windows®. Por favor visite o nosso sítio Web para conhecer os procedimentos de funcionamento do Sintonizador ASRock OC. Sítio Web da ASRock: http://www.asrock.com Com um hardware de propriedades e concepção de software avançadas, a Intelligent Energy Saver é uma tecnologia revolucionária que proporciona poupanças de energia inéditas. Por outras palavras, pode providenciar uma excepcional poupança de energia e melhorar a eficiência energética sem sacrificar o desempenho. Por favor visite o nosso sítio Web para conhecer os procedimentos de funcionamento da Intelligent Energy Saver. Sítio Web da ASRock: http://www.asrock.com P or tuguês 1. 77 ASRock N73PV-S / N73V-S Motherboard 9. Apesar de esta placa-mãe oferecer controle continuamente variável, não se recomenda efetuar over-clock. Freqüências de barramento diferentes das recomendadas para a CPU podem provocar instabilidade do sistema ou danos à CPU. 10. Assim que se detecta um superaquecimento na CPU, o sistema se desliga automaticamente e o botão de energia do chassis fica inativo.Cheque o ventilador da CPU na placa–mãe, para verificar se está funcionando corretamente antes de religar o sistema. Para melhorar a dissipação de calor, lembre-se de aplicar o material de interface térmica entre o processador e o dissipador de calor. 1.3 Configuração dos Jumpers A ilustração mostra como os jumpers são configurados. Quando há uma capa de jumpers sobre os pinos, diz–se que o jumper está “curto”. Não havendo capa sobre os pinos, o jumper está “aberto”. A ilustração mostra um jumper de 3 pinos em que os pinos 1 e 2 están “curtos” quando a capa de jumper estiver colocada sobre esses 2 pinos. Jumper PS2_USB_PW1 Short Open Configuração Pin2, Pin3 curtos para habilitar +5VSB (stand by) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. (veja a folha 2/3, No. 1) Restaurar CMOS (CLRCMOS1, jumper de 3 pinos) (veja a folha 2/3, No. 10) Configuração-padrão Limpar o CMOS P or tuguês Nota: CLRCMOS1 permite você limpar os dados em CMOS. Os dados em CMOS incluem informações da configuração do sistema como: por exemplo a senha do sistema, data, tempo, e os parámetros da configuração do sistema. Para limpar e reconfigurar os parámetros do sistema a configuração inicial da fábrica, por favor desligue o cabo de força, ponha em curto–circuito os pin 2 e pin 3 de CLRCMOS1 por mais de 5 segundos para limpar o CMOS usando um jumper. Por favor lembrese de remover o jumper depois de limpar o COMS. Se precisar limpar o CMOS ao concluir a atualização do BIOS, deverá reiniciar o sistema primeiro e, em seguida, desligá-lo antes de executar a ação de limpeza o CMOS. 78 ASRock N73PV-S / N73V-S Motherboard 1.4 Conectores Os conectores NÃO SÃO jumpers. NÃO coloque capas de jumper sobre estes conectores. A colocação de pontos de jumper sobre os conectores causará danos irreversíveis à placa-mãe. Conector Conector FDD Figura Descrição (FLOPPY 1, 33 pinos) (veja a folha 2/3, No. 17) o lado com listras vermelhas para o Pino 1 Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao lado Pino 1 do conector. Conector primário (Azul) (IDE1 de 39 pinos, veja a folha 2/3, No. 7) Ligue esta ponta (azul) à placa–mãe Ligue esta ponta (preta) aos dispositivos IDE Cabo ATA 66/100/133 de 80 condutores Nota: Para detalhes, consulte as instruções do fornecedor do seu dispositivo IDE. Conectores ATAII Serial (SATAII_1: veja a folha 2/3, No. 8) (SATAII_2: veja a folha 2/3, No. 13) SATAII_1 SATAII_3 SATAII_2 SATAII_4 (SATAII_3: veja a folha 2/3, No. 11) (SATAII_4: veja a folha 2/3, No. 12) (opcional) Tanto a saída do cabo de Serial dados SATA pode ser conectado ao disco rígido SATA / SATAII quanto o conector SATAII na placa mãe. P or tuguês Cabo de dados ATA (SATA) Estes quatro conectores Serial ATA (SATAII) suportam unidades de disco rígido SATA ou SATAII como dispositivos de armazenamento internos. A atual interface SATAII permite uma taxa de transferência de dados de até 3.0 Gb/s. 79 ASRock N73PV-S / N73V-S Motherboard Cabo de Alimentação ATA (SATA) (opcional) Ligue no conector de alimentação SATA HDD Conecte a fonte N73PV-S: Cabezal USB 2.0 (USB4_5 de 9 pinos) (veja a folha 2, No. 26) (USB6_7 de 9 pinos) Conecte a saída de cor preta do cabo de alimentação SATA ao conector de alimentação em cada acionador. Em seguida, conecte a saída branca do cabo de alimentação SATA ao conector de alimentação da fonte. Além das quatro portas USB 2.0 por defeito no painel de entrada/saída, há tres ligações USB 2.0 nesta placamãe. Cada ligação USB 2.0 pode suportar duas portas USB 2.0. (veja a folha 2, No. 25) (USB8_9 de 9 pinos) (veja a folha 2, No. 24) N73V-S: Cabezal USB 2.0 (USB4_5 de 9 pinos) (veja a folha 3, No. 25) P or tuguês (USB6_7 de 9 pinos) Além das quatro portas USB 2.0 por defeito no painel de entrada/saída, há duas ligações USB 2.0 nesta placamãe. Cada ligação USB 2.0 pode suportar duas portas USB 2.0. (veja a folha 3, No. 24) 80 ASRock N73PV-S / N73V-S Motherboard Conector de Porta de Impressão Esta é uma interface para um cabo de porta de impressão que permite uma ligação prática para dispositivos de impressão. (LPT1 de 25 pinos) (veja a folha 2/3, No. 16) Conectores internos de áudio (CD1 de 4 pinos) (CD1: veja a floha 2/3, No. 19) CD1 Conector Áudio do painel frontal (HD_AUDIO1 de 9 pinos) (veja a folha 2/3, No. 18) Estes conectores permitem que se receba entrada de áudio em estéreo de fontes de áudio como CD-ROM, DVD-ROM, placa sintonizadora de TV ou placa MPEG. Esta é uma interface para o cabo de áudio no painel frontal, que permite uma conexão e controle convenientes dos dispositivos de áudio. P or tuguês 1. Áudio de elevada definição que suporta a sensibilidade da tomada, mas o fio do painel existente no chassis tem de suportar HDA para funcionar correctamente. Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L. B. Ligue o Audio_R (RIN) ao OUT2_R e o Audio_L (LIN) ao OUT2_L. C. Ligue o Ground (GND) ao Ground (GND). D. MIC_RET e OUT_RET são apenas para o painel de áudio HD. Não necessita de os ligar para o painel de áudio AC’97. E. Entre no utilitário de configuração do BIOS. Vá até à opção Definições avançadas e escolha Configuração do chipset. Defina a opção Controlo do painel frontal de [Automático] para [Activado]. F. Entre no sistema Windows. Clique no ícone existente na barra de tarefas no canto inferior direito para aceder ao Realtek HD Audio Manager. Para Windows® XP / XP 64-bit OS: Clique em “Entrada/Saída de áudio”, seleccione “Definições do conector” , escolha a opção “Desactivar detecção da tomada do painel frontal” e guarde a alteração clicando em “OK”. 81 ASRock N73PV-S / N73V-S Motherboard Para Windows® VistaTM / VistaTM 64-bit OS: Clique o direito-cima “Folder” icone , escolhe “Deteção de valete de painel dianteiro” e guarda a mudança por clicar “OK”. Conector do sistema no painel Este conector acomoda diversas funções de sistema no painel frontal. (PANEL1 de 9 pinos) (veja a folha 2/3, No. 14) Conector do alto-falante do chassi Ligue o alto-falante do chassi neste conector. (SPEAKER1 de 4 pinos) (veja a folha 2/3, No. 15) Conector do ventilador do chassis Ligue o cabo do ventilador neste conector, coincidindo o fio preto com o pino de aterramento. (CHA_FAN1 de 3 pinos) (veja a folha 2/3, No. 9) Conector do ventilador da CPU (CPU_FAN1 de 4 pinos) Ligue o cabo do ventilador da CPU, coincidindo o fio preto com o pino de aterramento. 1 2 3 4 (veja a folha 2/3, No. 4) Apesar de esta placa-mãe possuir 4 apoios para uma ventoinha de CPU (Ventoinha silenciosa), uma ventoinha de 3 pinos para CPU poderá funcionar mesmo sem a função de controlo de velocidade da ventoinha. Se pretender ligar uma ventoinha de 3 pinos para CPU ao conector de ventoinha do CPU nesta placa-mãe, por favor, ligue-a aos pinos 1-3. Pinos 1-3 ligados Instalação de Ventoinha de 3 pinos Conector de força do ATX 12 24 1 13 (ATXPWR1 de 24 pinos) Ligue a fonte de alimentação ATX neste conector. P or tuguês (veja a folha 2/3, No. 6) 82 ASRock N73PV-S / N73V-S Motherboard Instalação da Fonte de alimentação ATX de 20 Pinos Conector ATX 12 V (ATX12V1 de 4 pinos ) (veja a folha 2, No. 27 ou folha 3, No. 26) 1 24 13 Note que é necessário ligar uma fonte de alimentação com conector ATX 12V neste conector para fornecer alimentação suficiente. Do contrário, haverá falhas de funcionamento. 2. Informações da BIOS O Utilitário de Configuração do BIOS está armazenado no chip FWH do BIOS. Ao iniciar o computador, pressione <F2> durante o Autoteste de iniciação (POST) para acessar o Utilitário de Configuração do BIOS; caso contrário, o POST continuará com as rotinas de teste. Se desejar acessar o Utilitário de Configuração do BIOS depois do POST, reinicie o sistema pressionando <Ctl> + <Alt> + <Del>, ou pressionando o botão de reinício no chassi do sistema. Para as informações detalhadas sobre o Utilitário de Configuração do BIOS, consulte o Manual do Usuário (arquivo PDF) no CD de suporte. 3. Informações do CD de Suporte Esta placa Mãe suporta vários sistemas operacionais: Microsoft® Windows®: XP / XP de 64 bits / VistaTM / VistaTM de 64 bits. O CD de instalação que acompanha a placa Mãe contem: drivers e utilitários necessários para um melhor desempenho da placa Mãe. Para começar a usar o CD de instalação, introduza o CD na leitora de CD-ROM do computador. Automaticamente iniciará o menu principal, casa o AUTORUN esteja ativado. Se o menu principal não aparecer automaticamente, explore o CD e execute o “ASSETUP.EXE” localizado na pasta BIN. P or tuguês nos Embora esta placa-mãe providencie um conector de energia 12 ATX de 24 pinos, pode apesar disso funcionar com a adapta-ção de uma fonte de energia tradicional de 20 pinos. Para usar a fonte de alimentação de 29 pinos, por favor ligue a sua fonte de alimentação com o Pino 1 e o Pino 13. 83 ASRock N73PV-S / N73V-S Motherboard 84 ASRock N73PV-S / N73V-S Motherboard ® ® ® ® ® ® ® ® ® 85 ASRock N73PV-S / N73V-S Motherboard ® 86 ASRock N73PV-S / N73V-S Motherboard “ ” ® ® ® ® ® “ ® 87 ASRock N73PV-S / N73V-S Motherboard “ ” “ “ ” ” “ ” 88 ASRock N73PV-S / N73V-S Motherboard SATAII_1 SATAII_3 SATAII_2 SATAII_4 89 ASRock N73PV-S / N73V-S Motherboard CD1 90 ASRock N73PV-S / N73V-S Motherboard ® ® ® 91 ASRock N73PV-S / N73V-S Motherboard 1 2 3 4 12 24 1 13 92 ASRock N73PV-S / N73V-S Motherboard 12 24 1 13 “ 12 24 “ \ 1 ” ” \ 13 93 ASRock N73PV-S / N73V-S Motherboard 94 ASRock N73PV-S / N73V-S Motherboard ® ® ® ® ® ® ® ® ® 95 ASRock N73PV-S / N73V-S Motherboard ® ® 96 ASRock N73PV-S / N73V-S Motherboard ® ® ® ® ® ® ® 97 ASRock N73PV-S / N73V-S Motherboard 98 ASRock N73PV-S / N73V-S Motherboard SATAII_1 SATAII_3 SATAII_2 SATAII_4 99 ASRock N73PV-S / N73V-S Motherboard CD1 100 ASRock N73PV-S / N73V-S Motherboard ® ® 101 ASRock N73PV-S / N73V-S Motherboard 1 2 3 4 12 24 1 13 102 ASRock N73PV-S / N73V-S Motherboard 12 24 1 13 ® 12 24 1 13 ® 103 ASRock N73PV-S / N73V-S Motherboard X O O O O O X O O O O O O: X: 104 ASRock N73PV-S / N73V-S Motherboard O O 105 ASRock N73PV-S / N73V-S Motherboard ® ® ® ® ® ® ® ® ® 106 ASRock N73PV-S / N73V-S Motherboard ® ® 107 ASRock N73PV-S / N73V-S Motherboard “ ” ® ® ® ® ® ® TM ® 108 ASRock N73PV-S / N73V-S Motherboard ® TM 109 ASRock N73PV-S / N73V-S Motherboard SATAII_1 SATAII_3 SATAII_2 SATAII_4 110 ASRock N73PV-S / N73V-S Motherboard CD1 111 ASRock N73PV-S / N73V-S Motherboard ® ® ® 112 ASRock N73PV-S / N73V-S Motherboard 1 2 3 4 12 24 1 13 12 24 1 13 113 ASRock N73PV-S / N73V-S Motherboard ® ® TM 114 ASRock N73PV-S / N73V-S Motherboard TM NOTE. If you install the VGA driver (version 163.91) on your system, but the window is not in full screen mode, please follow below steps to adjust the window. 1. Right-click the desktop and select NVIDIA Control Panel. 2. Click Display and click Change Flat Panel Scaling. 3. In the option When using a resolution lower than my display’s native resolution, please select Use my display’s built-in scaling. 115 ASRock N73PV-S / N73V-S Motherboard