Legrand AU7010LA Guía de instalación

Tipo
Guía de instalación

Este manual también es adecuado para

Installation Instructions • Notice ďInstallation Instrucciones de Instalación
Catalog Number(s) • Numéro(s) de Catalogue • Les Numéros de Catalogue:
Country of Origin: Made in China • Pays ďorigine: Fabriqué en Chine • Pais de origen: Hecho en China
Digital Audio Amplified Keypad
Digital Audio amplifié clavier
Digital Audio amplificado del teclado
Doc. #1507218 8/18 Rev B
AU7010
1
2
Run a Cat 5 cable and a minimum 18/2 wire
from the enclosure to a single gang box at the
eventual location of an AU7010 Amplified
Keypad. Also optionally run an additional Cat
5 cable from the AU7010 location to a single
gang box at the eventual location of the first
AU7008 Local Source Input. Also run a 16/2
speaker wire from each speaker location to
the AU7010 location. Terminate each end of
the Cat 5 cable/s with an RJ45 plug (568A).
Please read these instructions completely
before you begin.
NOTICE D’INSTALLATION
Veuillez lire toutes ces instructions
avant de commencer.
INSTRUCCIONES DE INSTALACIÓN
Lea completamente estas instrucciones
antes de comenzar.
Exécuter un câble Cat 5 et un fil 18/2 minimum entre
l'enceinte à un boîtier encastré à l'emplacement
éventuel d'un clavier amplifié de AU7010. Aussi
éventuellement exécuter un câble Cat 5 de
l'emplacement de AU7010 à un boîtier encastré à
l'emplacement éventuel de l'entrée Source locale du
premier AU7008. Également courir un fil de haut-
parleur 16/2 de chaque emplacement du haut-parleur à
l'emplacement AU7010. Mettre fin à chaque extrémi
du câble Cat 5/s avec une prise RJ45 (568 a).
Ejecute un cable Cat 5 y una mínima de 18/2 alambre
del recinto a una caja única banda en la ubicación
final de un teclado AU7010 amplificado. También
opcionalmente ejecutar un cable Cat 5 adicional
desde la ubicación de AU7010 a una caja única banda
en la ubicación final de la primera entrada de fuente
Local AU7008. También ejecutar un cable de altavoz
de 16/2 desde la ubicación de cada altavoz a la
ubicación de AU7010. Terminar cada extremo del
cable Cat 5/s con un enchufe RJ45 (568A).
The AU7010 Amplified Keypad is a single-gang, wall-
mounted, Cat 5 cable and speaker wire connected
volume control for a zone of the Legrand Digital Audio
system. It receives AES3 digital audio from the AU7000
or AU7004 or locally from one or more AU7008s, and
plays that audio over connected speakers. It has a an
On/Off button, a mute button, an Up/Down volume
control switch, a source select switch and a Favorite
button to recall a favorite setting.
AU7007
Global Source Input
AU7008
Local
Source
Inputs
At the AU7010 location, plug the
terminated Cat 5 cables from the enclosure
and AU7008 into the rear of the AU7010.
Use the six position terminal strip on the
rear of the AU7010 to connect the 18/2
wire from the PW1020 in the enclosure and
the 16/2 speaker wire from each speaker.
Then mount the AU7010 into the single
gang box and attach the wall plate.
3
At the AU7010, turn on the keypad, and
select the desired source of music from the
AU7000 or AU7004, or locally from an
AU7008 and adjust volume to taste. For
additional AU7010 functionality, refer to the
Legrand Digital Audio System User Manual.
À l'emplacement AU7010, branchez les câbles de
Cat 5 terminés depuis le boîtier et les AU7008
dans l'arrière de la AU7010. Utiliser le bornier de
la six position sur l'arrière de la AU7010 pour
connecter le fil de 18/2 de la PW1020 dans le
boîtier et le câble de haut-parleur de 16/2 de
chaque haut-parleur. Puis monter le AU7010 dans
la boîte de jonction simple et fixez la plaque
murale.
En la ubicación AU7010, enchufe los cables Cat
5 terminados del recinto y AU7008 en la parte
posterior de la AU7010. Utilice la regleta seis
posición en la parte posterior de la AU7010
para conectar el cable de 18/2 de la PW1020
en el recinto y el cable del altavoz 16/2 de cada
altavoz. Luego instale el AU7010 en la caja
única y coloque la placa de la pared.
À la AU7010, tournez sur le pavé et sélectionnez la
source souhaitée de la musique de la AU7000 ou
AU7004 ou localement d'un AU7008 et ajuster le
volume à votre goût. Pour AU7010 des
fonctionnalités supplémentaires, consultez le
manuel d'utilisation Legrand Digital Audio System.
En el AU7010, encender el teclado y seleccionar la
fuente deseada de la música de la AU7000 o
AU7004, o localmente desde un AU7008 y ajustar
el volumen a su gusto. Para funcionalidad de
AU7010 adicional, consulte la Legrand Digital
Audio sistema Manual de usuario.
AU7010
Amplified
Keypads
AU7001
Digital Audio Input Module
AU7000
AU7004
PW1020
Ethernet
Switch
Le clavier amplifié de AU7010 est un branchement simple, mural, Cat 5 fil de câble
et haut-parleur connecté contrôle de volume pour une zone du système
audionumérique Legrand. Il reçoit AES3 audio numérique de la AU7000 ou AU7004
ou localement d'un ou plusieurs AU7008s et joue que l'audio sur des enceintes
connectées. Il a un On/Off bouton, un bouton de sourdine, haut/bas commutateur de
commande de volume, une source select switch et une touche Favorite de rappeler
un réglage favori.
El teclado AU7010 amplificado es un single-gang, montado en la pared, cable Cat 5 de cable y el altavoz
conectado control de volumen para una zona del sistema de Audio Digital Legrand. Recibe audio digital AES3
desde el AU7000 o AU7004 o localmente desde uno o más AU7008s y reproduce el audio sobre los altavoces
conectados. Tiene un un On/Off botón, un botón de silencio, hasta una/abajo el interruptor de control de volumen,
una fuente seleccionar un favorito botón y recordar un escenario favorito.
800.223.4162
1.877.BY.LEGRAND
www.legrand.us
www.legrand.ca
© Copyright 2013 Legrand All Rights Reserved.
© Copyright 201
3 Tous droits réservés Legrand.
© Copyright 201
3 Legrand Todos los derechos reservados.
AU7010 Technical Specifications
Power Requirement
+24 VDC / 0VDC
Output Power
10W / ch. @ 8 // 20W / ch. @ 4
Frequency Response
20 Hz to 20K Hz ± 3dB
Total Harmonic Distortion
0.13% Typical
Signal-to-noise ratio
105 dB@1kHz
Doc. #1507218 8/18 Rev B
This device is verified to comply with Part 15 Class B of the FCC Rules.
Cet appareil est vérifié pour se conformer à la partie 15 classe B de la FCC.
Este aparato está verificado para cumplir con la parte 15 clase B de la FCC.
Source Select Button
Bouton de sélection de source
Botón de selección de fuente
Mute Button
Bouton MUTE
Botón MUTE
On / Off
Button
Marche /
arrêt
Bouton
Encendido
/ apagado
Botón
Favorite
Button
Favori
Bouton
Favorito
Botón
Volume
Control
Button
Volume
Contrôle
Bouton
Volumen
Control
Botón
AU7000 /
AU7004
AU7008
L
R
+
PW1020
+24V
+
-
-
GND

Transcripción de documentos

Digital Audio Amplified Keypad Digital Audio amplifié clavier Digital Audio amplificado del teclado Installation Instructions • Notice ďInstallation • Instrucciones de Instalación Doc. #1507218 8/18 Rev B Catalog Number(s) • Numéro(s) de Catalogue • Les Numéros de Catalogue: AU7010 Country of Origin: Made in China • Pays ďorigine: Fabriqué en Chine • Pais de origen: Hecho en China AU7007 Global Source Input Ethernet Switch AU7008 Local Source Inputs AU7000 AU7010 Amplified Keypads The AU7010 Amplified Keypad is a single-gang, wallmounted, Cat 5 cable and speaker wire connected volume control for a zone of the Legrand Digital Audio system. It receives AES3 digital audio from the AU7000 or AU7004 or locally from one or more AU7008s, and plays that audio over connected speakers. It has a an On/Off button, a mute button, an Up/Down volume control switch, a source select switch and a Favorite button to recall a favorite setting. AU7001 Digital Audio Input Module AU7004 INSTALLATION INSTRUCTIONS Please read these instructions completely before you begin. NOTICE D’INSTALLATION Veuillez lire toutes ces instructions avant de commencer. INSTRUCCIONES DE INSTALACIÓN Lea completamente estas instrucciones antes de comenzar. 1 2 3 PW1020 Le clavier amplifié de AU7010 est un branchement simple, mural, Cat 5 fil de câble et haut-parleur connecté contrôle de volume pour une zone du système audionumérique Legrand. Il reçoit AES3 audio numérique de la AU7000 ou AU7004 ou localement d'un ou plusieurs AU7008s et joue que l'audio sur des enceintes connectées. Il a un On/Off bouton, un bouton de sourdine, haut/bas commutateur de commande de volume, une source select switch et une touche Favorite de rappeler un réglage favori. El teclado AU7010 amplificado es un single-gang, montado en la pared, cable Cat 5 de cable y el altavoz conectado control de volumen para una zona del sistema de Audio Digital Legrand. Recibe audio digital AES3 desde el AU7000 o AU7004 o localmente desde uno o más AU7008s y reproduce el audio sobre los altavoces conectados. Tiene un un On/Off botón, un botón de silencio, hasta una/abajo el interruptor de control de volumen, una fuente seleccionar un favorito botón y recordar un escenario favorito. Run a Cat 5 cable and a minimum 18/2 wire from the enclosure to a single gang box at the eventual location of an AU7010 Amplified Keypad. Also optionally run an additional Cat 5 cable from the AU7010 location to a single gang box at the eventual location of the first AU7008 Local Source Input. Also run a 16/2 speaker wire from each speaker location to the AU7010 location. Terminate each end of the Cat 5 cable/s with an RJ45 plug (568A). Exécuter un câble Cat 5 et un fil 18/2 minimum entre l'enceinte à un boîtier encastré à l'emplacement éventuel d'un clavier amplifié de AU7010. Aussi éventuellement exécuter un câble Cat 5 de l'emplacement de AU7010 à un boîtier encastré à l'emplacement éventuel de l'entrée Source locale du premier AU7008. Également courir un fil de hautparleur 16/2 de chaque emplacement du haut-parleur à l'emplacement AU7010. Mettre fin à chaque extrémité du câble Cat 5/s avec une prise RJ45 (568 a). Ejecute un cable Cat 5 y una mínima de 18/2 alambre del recinto a una caja única banda en la ubicación final de un teclado AU7010 amplificado. También opcionalmente ejecutar un cable Cat 5 adicional desde la ubicación de AU7010 a una caja única banda en la ubicación final de la primera entrada de fuente Local AU7008. También ejecutar un cable de altavoz de 16/2 desde la ubicación de cada altavoz a la ubicación de AU7010. Terminar cada extremo del cable Cat 5/s con un enchufe RJ45 (568A). At the AU7010 location, plug the terminated Cat 5 cables from the enclosure and AU7008 into the rear of the AU7010. Use the six position terminal strip on the rear of the AU7010 to connect the 18/2 wire from the PW1020 in the enclosure and the 16/2 speaker wire from each speaker. Then mount the AU7010 into the single gang box and attach the wall plate. À l'emplacement AU7010, branchez les câbles de Cat 5 terminés depuis le boîtier et les AU7008 dans l'arrière de la AU7010. Utiliser le bornier de la six position sur l'arrière de la AU7010 pour connecter le fil de 18/2 de la PW1020 dans le boîtier et le câble de haut-parleur de 16/2 de chaque haut-parleur. Puis monter le AU7010 dans la boîte de jonction simple et fixez la plaque murale. En la ubicación AU7010, enchufe los cables Cat 5 terminados del recinto y AU7008 en la parte posterior de la AU7010. Utilice la regleta seis posición en la parte posterior de la AU7010 para conectar el cable de 18/2 de la PW1020 en el recinto y el cable del altavoz 16/2 de cada altavoz. Luego instale el AU7010 en la caja única y coloque la placa de la pared. At the AU7010, turn on the keypad, and select the desired source of music from the AU7000 or AU7004, or locally from an AU7008 and adjust volume to taste. For additional AU7010 functionality, refer to the Legrand Digital Audio System User Manual. À la AU7010, tournez sur le pavé et sélectionnez la source souhaitée de la musique de la AU7000 ou AU7004 ou localement d'un AU7008 et ajuster le volume à votre goût. Pour AU7010 des fonctionnalités supplémentaires, consultez le manuel d'utilisation Legrand Digital Audio System. En el AU7010, encender el teclado y seleccionar la fuente deseada de la música de la AU7000 o AU7004, o localmente desde un AU7008 y ajustar el volumen a su gusto. Para funcionalidad de AU7010 adicional, consulte la Legrand Digital Audio sistema Manual de usuario. On / Off Button Volume Control Button Marche / arrêt Bouton +24V PW1020 GND L +R + Volume Contrôle Bouton Encendido / apagado Botón Volumen Control Botón Favorite Button AU7000 / AU7004 AU7008 Favori Bouton Mute Button Favorito Botón Bouton MUTE Botón MUTE Source Select Button Bouton de sélection de source Botón de selección de fuente AU7010 Technical Specifications Power Requirement +24 VDC / 0VDC Output Power 10W / ch. @ 8Ω // 20W / ch. @ 4Ω Frequency Response 20 Hz to 20K Hz ± 3dB Total Harmonic Distortion 0.13% Typical Signal-to-noise ratio 105 dB@1kHz This device is verified to comply with Part 15 Class B of the FCC Rules. Cet appareil est vérifié pour se conformer à la partie 15 classe B de la FCC. Este aparato está verificado para cumplir con la parte 15 clase B de la FCC. Doc. #1507218 8/18 Rev B © Copyright 2013 Legrand All Rights Reserved. © Copyright 2013 Tous droits réservés Legrand. © Copyright 2013 Legrand Todos los derechos reservados. 800.223.4162 1.877.BY.LEGRAND www.legrand.us www.legrand.ca
  • Page 1 1
  • Page 2 2

Legrand AU7010LA Guía de instalación

Tipo
Guía de instalación
Este manual también es adecuado para