Yamaha AvantGard N1 El manual del propietario

Marca: Yamaha

Modelo: AvantGard N1

Categoría: Equipo de música suplementario

Tipo: El manual del propietario

Este manual también es adecuado para

Before using this instrument, be sure to read “PRECAUTIONS”

on pages 6 – 7.

When assembling or transporting the unit, consult a qualified

AvantGrand dealer. (Refer to page 37 for the assembly

instructions.)

Achten Sie darauf, vor Einsatz dieses Instruments die

„VORSICHTSMASSNAHMEN“ auf Seiten 6-7 durchzulesen.

Wenden Sie sich bezüglich Zusammenbau und Transport des

Gerätes an einen qualifizierten AvantGrand-Händler. (Lesen Sie

auf Seite 37 für Anweisungen zur Montage.)

Avant d'utiliser cet instrument, lisez attentivement la section

« PRÉCAUTIONS D'USAGE » aux pages 6-7.

Lors de l'assemblage ou du transport de l'unité, consultez un

revendeur qualifié AvantGrand. (Reportez-vous à la page 37

pour obtenir des instructions sur le montage.)

Antes de utilizar el instrumento, lea la sección

“PRECAUCIONES”, en las páginas 6-7.

Al montar o transportar la unidad, consulte a un distribuidor

cualificado de AvantGrand. (Consulte las instrucciones de

montaje en la página 37.)

Owner’s Manual

Bedienungsanleitung

Mode d'emploi

Manual de instrucciones

ENGLISHDEUTSCH

FRANÇAIS

ESPAÑOL

2 • N1 Owner’s Manual

PRODUCT SAFETY MARKINGS: Yamaha electronic

products may have either labels similar to the graphics

shown below or molded/stamped facsimiles of these graph-

ics on the enclosure. The explanation of these graphics

appears on this page. Please observe all cautions indicated

on this page and those indicated in the safety instruction

section.

See bottom of Keyboard enclosure for graphic symbol

markings.

The exclamation point within the equilat-

eral triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in

the literature accompanying the product.

The lightning flash with arrowhead sym-

bol, within the equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage”

within the product’s enclosure that may

be of sufficient magnitude to constitute a

risk of electrical shock.

IMPORTANT NOTICE: All Yamaha electronic products

are tested and approved by an independent safety testing

laboratory in order that you may be sure that when it is

properly installed and used in its normal and customary

manner, all foreseeable risks have been eliminated. DO

NOT modify this unit or commission others to do so unless

specifically authorized by Yamaha. Product performance

and/or safety standards may be diminished. Claims filed

under the expressed warranty may be denied if the unit is/

has been modified. Implied warranties may also be

affected.

SPECIFICATIONS SUBJECT TO CHANGE: The

information contained in this manual is believed to be cor-

rect at the time of printing. However, Yamaha reserves the

right to change or modify any of the specifications without

notice or obligation to update existing units.

ENVIRONMENTAL ISSUES: Yamaha strives to produce

products that are both user safe and environmentally

friendly. We sincerely believe that our products and the pro-

duction methods used to produce them, meet these goals. In

keeping with both the letter and the spirit of the law, we

want you to be aware of the following:

Battery Notice: This product MAY contain a small non-

rechargeable battery which (if applicable) is soldered in

place. The average life span of this type of battery is

approximately five years. When replacement becomes nec-

essary, contact a qualified service representative to perform

the replacement.

Warning: Do not attempt to recharge, disassemble, or

incinerate this type of battery. Keep all batteries away from

children. Dispose of used batteries promptly and as regu-

lated by applicable laws. Note: In some areas, the servicer

is required by law to return the defective parts. However,

you do have the option of having the servicer dispose of

these parts for you.

Disposal Notice: Should this product become damaged

beyond repair, or for some reason its useful life is consid-

ered to be at an end, please observe all local, state, and fed-

eral regulations that relate to the disposal of products that

contain lead, batteries, plastics, etc.

NOTICE: Service charges incurred due to lack of knowl-

edge relating to how a function or effect works (when the

unit is operating as designed) are not covered by the manu-

facturer’s warranty, and are therefore the owners responsi-

bility. Please study this manual carefully and consult your

dealer before requesting service.

NAME PLATE LOCATION: The graphic below indi-

cates the location of the name plate. The model number,

serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number,

and the date of purchase in the spaces provided below and

retain this manual as a permanent record of your purchase.

Model

Serial No.

Purchase Date

92-469-q (bottom)

SPECIAL MESSAGE SECTION

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

N1 Owner’s Manual • 3

The above warning is located on the bottom of the unit.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to per-

sons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and mainte-

nance (servicing) instructions in the literature

accompanying the product.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tri-

pod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination

to avoid injury from tip-over.

13 Unplug this apparatus during

lightning storms or when unused for long periods of

time.

14 Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has

been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

IMPORTANT. The wires in this mains lead are coloured in accordance with the fol-

lowing code:

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond

with the coloured makings identifying the terminals in your plug proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked

with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal of the three pin plug.

• This applies only to products distributed by Yamaha Music U.K. Ltd. (2 wires)

4 • N1 Owner’s Manual

Hybrid Piano

Combining over one hundred years of superb piano craftsmanship with the latest advanced technolo-

gies, Yamaha is proud to introduce a true hybrid acoustic/digital piano that meets the demands of con-

temporary musicians.

Authentic Acoustic Piano Touch with Special Grand Piano Action and Piano Keyboard

This innovative keyboard delivers the rich expressive quality of an acoustic grand piano, thanks to its finely

nuanced touch and exceptional response. Drawing on over one hundred years of expertise in crafting grand

pianos, Yamaha has created a unique and yet wholly traditional piano action mechanism for the AvantGrand.

The AvantGrand offers a special action that features the same configuration as the action of an acoustic grand

piano. The movement of the hammers and the weight distribution of each hammer have been meticulously

adjusted to give this instrument an exceptionally smooth feel. The keyboard also features real-wood keys, just

as on a real grand piano, letting you enjoy an authentic touch and feel that goes far beyond any existing digital

piano.

The Realistic Ambience of Grand Piano Voice

The AvantGrand features Yamaha’s original “Spatial Acoustic Sampling” tone-generation sampling technol-

ogy for the grand piano voices. The voices are sampled from four positions around a grand piano, not only

from the left and right (as on most digital pianos), but also from the center and rear.

The instrument also utilizes the “Spatial Acoustic Speaker System,” in which each speaker is equipped with

its own dedicated amplifier. This is essential for preserving the sonic integrity of each frequency range and

making sure that the nuances of each sound are reproduced naturally with absolute clarity.

These technologies provide rich resonance and sonic power heretofore only available on an actual grand

piano.

Best Condition without Tuning

Unlike acoustic pianos, the AvantGrand does not need to be tuned. It always stays perfectly in tune even after

long-time use.

Flexible Volume Control

The AvantGrand gives you full control over the instrument volume, letting you adjust the level just as desired.

Also, you can play or listen in total privacy through one or two pairs of headphones.

Features

N1 Owner’s Manual • 5

PRECAUTIONS .....................................................6

Introduction

Panel Controls and Terminals .....................................8

Playing the Keyboard ...................................................9

Using the Pedals...................................................... 11

Using Headphones (option) ..................................... 11

Music Rest ............................................................... 12

Reference

Listening to the Preset Songs ................................... 13

Basic Operations and More .......................................15

Selecting Voices ...................................................... 15

Listening to the Voice Demo Songs......................... 16

Using the Metronome............................................... 17

Adjusting the Keyboard Touch

(Touch Sensitivity) ................................................... 19

Adding Variations to the Sound — Reverb .............. 19

Transposition ........................................................... 20

Fine-tuning the Pitch................................................ 21

Scale Tuning............................................................ 22

Recording your Performance ....................................23

Playing Back the Song Recorded

to the Instrument...................................................... 24

Saving Your Recorded Performance

to USB Flash Memory.............................................. 25

Listening to songs in USB Flash Memory................27

Formatting USB Flash Memory ................................. 29

Backing up Data and Initializing the Settings .......... 30

Backup data in internal memory .............................. 30

Initializing the data ................................................... 30

Connections ................................................................31

Connectors............................................................... 31

About MIDI................................................................... 33

Connecting to a Computer....................................... 33

Local Control On/Off ................................................ 34

Appendix

Message List ...............................................................35

Troubleshooting .........................................................36

Assembling the Unit ................................................... 37

Specifications .............................................................39

Index ............................................................................40

Quick Operation Guide* .............................................43

Table of Contents

* This is a quick reference for operation of the functions assigned to the

buttons and keyboard.

This section includes a list of display messages, Quick

Operation Guide and other information.

This section explains how to make detailed settings for

the instrument’s various functions.

Getting started playing your new Avant Grand!

Accessories

Owner’s Manual

AC Power Cord

Felt Key Cover

Bench*

* Included or optional depending on locale.

My Yamaha Product User Registration*

* The PRODUCT ID on the sheet will be needed when you fill out

the User Registration form.

Data List

You can download various MIDI-related reference materials, such as the MIDI Data Format and MIDI Implementation Chart,

from the Yamaha Manual Library.

Connect to the Internet, visit the following website, type the model name of your instrument (such as “N1”) in the Model Name

text box, then click the Search button.

Yamaha Manual Library

http://www.yamaha.co.jp/manual/

6 • N1 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators, and

do not excessively bend or otherwise damage the cord, place heavy objects on it,

or place it in a position where anyone could walk on, trip over, or roll anything

over it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use only the supplied power cord/plug.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. Then have the device inspected

by Yamaha service personnel.

• The power cord or plug becomes frayed or damaged.

• It emits unusual smells or smoke.

• Some object has been dropped into the instrument.

• There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Read carefully the attached documentation explaining the assembly process.

Failure to assemble the instrument in the proper sequence might result in

damage to the instrument or even injury.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• When transporting or moving the instrument, always use two or more people.

Attempting to lift the instrument by yourself may damage your back, result in

other injury, or cause damage to the instrument itself.

• Before moving the instrument, remove all connected cables.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the

desired listening level.

• Do not insert a finger or hand in any gaps on the fallboard or instrument. Also

take care that the fallboard does not pinch your finger.

• Never insert or drop paper, metallic, or other objects into the gaps on the

fallboard, panel or keyboard. This could cause physical injury to you or others,

damage to the instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

•

Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing loss.

If you experience any hearing loss or ringing in the ears, consult a physician.

•

Do not place the bench in an unstable position where it might accidentally fall over.

• Do not play carelessly with or stand on the bench. Using it as a tool or stepladder

or for any other purpose might result in accident or injury.

• Only one person should sit on the bench at a time, in order to prevent the

possibility of accident or injury.

• Do not attempt to adjust the bench height while sitting on the bench, since this can

cause excessive force to be imposed on the adjustment mechanism, possibly

resulting in damage to the mechanism or even injury.

• If the bench screws become loose due to extensive long-term use, tighten them

periodically using the included tool.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/Power cord

Assembly

Location

Connections

Handling caution

Using the bench (If included)

DMI-3 1/2

N1 Owner’s Manual • 7

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or

damage to other property, follow the notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile

phone, or other electric devices. Otherwise, the instrument, TV, or radio may gen-

erate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or

heat (such as in direct sunlight, near a heater, or in a car during the day) to pre-

vent the possibility of panel disfiguration, damage to the internal components or

unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° –

104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or keyboard.

• Bumping the surface of the instrument with metal, porcelain, or other hard

objects can cause the finish to crack or peel. Use caution.

• When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use

paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

• Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small

particles of dirt can scratch the instrument’s finish.

• During extreme changes in temperature or humidity, condensation may occur

and water may collect on the surface of the instrument. If water is left, the wooden

parts may absorb the water and be damaged. Make sure to wipe any water off

immediately with a soft cloth.

 Saving data

• The song data saved to internal memory of this instrument is retained even when

the power is turned off. However, the data could be lost due to malfunction or

incorrect operation. Save important data to a USB storage device (page 25).

• To protect against data loss through media damage, we recommend that you save

your important data onto two USB storage device.

Always turn the power off when the instrument is not in use.

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to

MIDI data and/or audio data is strictly prohibited except for your personal use.

• This product incorporates and bundles computer programs and contents in

which Yamaha owns copyrights or with respect to which it has license to use oth-

ers’ copyrights. Such copyrighted materials include, without limitation, all com-

puter software, style files, MIDI files, WAVE data, musical scores and sound

recordings. Any unauthorized use of such programs and contents outside of per-

sonal use is not permitted under relevant laws. Any violation of copyright has

legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

 About this manual

• The illustrations and displays as shown in this manual are for instructional pur-

poses only, and may appear somewhat different from those on your instrument.

• The company names and product names in this manual are the trademarks or

registered trademarks of their respective companies.

Tuning

Unlike an acoustic piano, the instrument does not need to be tuned. It always stays perfectly in tune.

However, if you feel something wrong concerning the keyboard touch, contact your Yamaha dealer.

IMPORTANT – Check your power supply –

Make sure that your local AC mains voltage matches the voltage specified on

the name plate on the bottom panel. In some areas a voltage selector may be

provided on the bottom of the main keyboard unit near the power cord. Make

sure that the voltage selector is set for the voltage in your area. The voltage

selector is set at 240V when the unit is initially shipped. To change the setting

use a “minus” screwdriver to rotate the selector dial so that the correct voltage

appears next to the pointer on the panel.

Yamaha cannot be held responsible for damage caused by improper use

or modifications to the instrument, or data that is lost or destroyed.

Transporting / Placing

If you move to another location, transport the instrument

horizontally. Do not lean it up against a wall or stand it

up side down. Do not subject the instrument to

excessive vibration or shock.

CAUTION

When moving the instrument, always hold the bottom of the

main unit.

Be sure not to hold the headphone jack box or the speaker

net. Improper handling can result in damage to the instru-

ment or personal injury.

Place the instrument away from the wall by at least 15

cm to optimize and enhance the sound effect.

If you find the instrument shaky or unstable after

installing, insert the included felt strips. For details,

refer to the instructions supplied with the felt strips.

Do not

hold here.

Do not hold here.

Do not

hold here.

DMI-3 2/2

8 • N1 Owner’s Manual

Panel Controls and Terminals

Overview

Control Panel

Display ..............................................................................See below.

w [DEMO/SONG] button........................................pages 13, 16, 24, 27

e [REVERB] button .................................................................. page 19

r [METRONOME] button ......................................................... page 17

t [PIANO/VOICE] button.......................................................... page 15

y [FUNCTION] button .......................................... pages 20, 21, 22, 34

u [RECORD] button ................................................................. page 23

i [+]/[-] button

o [PLAY/STOP] button...........................................pages 13, 16, 24, 27



Display

Check the operation on the display of the top panel as you use the instrument. The display indicates different values, as shown

below, depending on the operation. The display turns dark after the values are set.

For more information, refer to the instructions on each function. The message list (page 35) is also available for your reference.

Music rest (page 12)

Fallboard

(pages 9, 10)

(Bottom surface)

[AC IN] connector

(page 9)

Power switch

(page 10)

Pedals (page 11)

Control panel

(See below.)

(Bottom surface)

Jacks and Terminals

(page 31)

[MASTER VOLUME]

control (page 10)

USB [TO DEVICE]

terminal (page 26)

[PHONES] jacks

(page 11)

d01

(Song number)

(Parameter value)

Introduction

N1 Owner’s Manual • 9

Playing the Keyboard

1 Connecting the power cord

1-1 Set the voltage selector and insert the power cord plug to the [AC IN] connector. Refer to the “Panel Con-

trols and Terminals” on page 8 for information on the location of the [AC IN] connector.

WARNING

Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used. (The voltage rating

appears on the name plate on the bottom panel). Connecting the unit to an inappropriate AC supply can seriously

damage the internal circuitry and may even pose a shock hazard!

1-2 Insert the plug on the other end of the power cord to a standard AC outlet.

WARNING

Use only the AC power cord supplied with the instrument. If the supplied power

cord is lost or damaged and needs to be replaced, contact your Yamaha dealer.

The use of an inappropriate replacement can pose a fire and shock hazard!

WARNING

The type of AC power cord provided with the instrument may be different depend-

ing on the country in which the instrument was purchased. (In some areas a plug

adaptor may be provided to match the pin configuration of the AC wall outlets in

your area.) Do NOT modify the plug provided with the instrument. If the plug will

not fit the outlet, have a proper outlet installed by a qualified electrician.

2 Opening the fallboard

Using the hand grip on the front, lift open the fallboard.

CAUTION

Hold the fallboard with both hands when opening or closing it.

Do not release it until it is fully opened or closed. Be careful to

avoid catching fingers (yours or others, especially children’s)

between the fallboard and the unit.

CAUTION

Do not place objects such as a piece of metal or paper on top

of the fallboard. Small objects placed on the fallboard may fall

inside the unit when the fallboard is opened and may be nearly

impossible to remove. This could cause electric shock, short

circuit, fire or other serious damage to the instrument.

If this happens, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument

inspected by qualified Yamaha service personnel.

[AC IN]

connector

Voltage

Selector

For models that feature a voltage selector:

Set the voltage selector to an appropriate voltage.

Voltage Selector

Before connecting the AC power cord, check the setting of the voltage selector which is provided

in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a “minus”

screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the

pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the

proper voltage has been selected, connect the AC power cord to the AC IN and an AC wall outlet.

A plug adaptor may be also provided in some areas to match the pin configuration of the AC wall

outlets in your area.

(The shape of the plug differs

depending on locale.)

CAUTION

Be careful to avoid catching your

fingers when opening the fallboard.

Playing the Keyboard

10 • N1 Owner’s Manual

3 Turning the power on

Press the [ ] power switch located on the right of the keyboard. This turns the power on, and the power indi-

cator located below the left end of the keyboard lights up.



A swirl graphic appears in the display located on the left of the keyboard and the instrument starts up when the

swirl in the display stops.

NOTICE

Do not press any keys until the instrument has completely started up (approx. eight seconds after turning on the switch).

Doing so may cause some keys to not sound normally.

4 Playing the keyboard

Play the keyboard to produce sound.

5 Turning the power off

Press the [ ] power switch again. The power indicator turns off when the power turns off.

NOTICE

A small amount of electrical current remains even after the power switch is turned off. If you plan not to use the instrument

for a long period of time, be sure to unplug the instrument from the AC outlet.

6 Closing the fallboard

Grip the fallboard, and close it gently.

MAXMIN

MASTER VOLUME

lights up

power switch

Adjusting the volume

While playing the keyboard, adjust the volume level by

using the [MASTER VOLUME] control located at the left

of the panel.

CAUTION

Do not use this instrument at a high volume level for a long period

of time, or your hearing may be damaged.

MAX

USB TO

MIN

MASTER VOLUME

The level

decreases.

The level

increases.

CAUTION

Be careful to avoid catching your fingers when closing the fallboard.

N1 Owner’s Manual • 11

Playing the Keyboard

The instrument has three foot pedals that produce a range of expressive effects similar to those produced by the

pedals on an acoustic piano.

Damper (Right) Pedal

The damper pedal functions in the same way as a damper pedal on an

acoustic piano. When the damper pedal is pressed, notes sustain longer.

Releasing the pedal immediately stops (damps) any sustained notes. The

damper pedal features a half-pedal function.

What is the half-pedal function?

This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you press the

pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a

bit murky and loud with too much sustain, you can release the pedal half way to subdue the sustain (murkiness).

Sostenuto (Center) Pedal

If you play a note or chord on the keyboard and press the sostenuto pedal

while the note(s) are held, those notes will sustain as long as you hold the

pedal (as if the damper pedal had been pressed) but all subsequently

played notes will not be sustained. This makes it possible to sustain a

chord, for example, while other notes are played “staccato.”

Soft (Left) Pedal

The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The

soft pedal will not affect notes that are already playing when it is pressed.

Connect a pair of headphones to one of the [PHONES] jacks located on

the bottom left of the instrument. When the headphones are plugged into

either of the [PHONES] jacks, the internal speaker system is automati-

cally shut off

Two [PHONES] jacks are provided. You can connect two sets of stan-

dard stereo headphones. (If you are using only one pair of headphones,

you can plug them into either jack.)

CAUTION

Do not listen to the instrument at a high volume level through headphones for a

long period of time, or your hearing may be damaged.

Using the Pedals

Using Headphones (option)

When you press the damper pedal

here, the notes you play before you

release the pedal sustain longer.

When you press the sostenuto pedal

here while holding the note, the note will

sustain as long as you hold the pedal.

MAX

PHONES USB TO DEVICE

MIN

MASTER VOLUME

Standard stereo

phone plug

Playing the Keyboard

12 • N1 Owner’s Manual

To raise the music rest:

1 Pull the music rest up and toward yourself as far as it will go.

2 Flip down the two metal supports at the left and right on the rear of

the music rest.

3 Lower the music rest so that it rests on the metal supports.

To lower the music rest:

1 Pull the music rest toward yourself as far as it will go.

2 Raise the two metal supports (at the rear of the music rest).

3 Gently lower the music rest backward until it is all the way down.

CAUTION

Do not try to use the music rest in a half-raised position. When raising or lower-

ing the music rest, do not release your hands from the music rest until it is all the

way up or down.

Music Rest

N1 Owner’s Manual • 13

Listening to the Preset Songs

This instrument features a variety of built-in piano preset songs. You can simply listen to these songs.

1 Engage the Preset Song mode.

While holding down the [DEMO/SONG] button, press the

[+] or [-] button until “

P01

” appears on the display.

2 Select a preset song.

Press the [+] or [-] button to select a song.

•

P01

–

P10

..... Select a preset song number and play only the selected

song.

•

P.AL

................ Play all preset songs in sequence.

•

P.rd

................ Play all preset songs continuously in random order.

3 Start playback.

Press the [PLAY/STOP] button to start playback.

While a piano preset song is playing, press the [+] or [-] button to change to the

next or previous piano song.

4 Stop playback.

Press the [PLAY/STOP] button to stop playback.

3, 4

Song:

In this manual, performance data is called a

“Song.” This includes preset songs and

demo songs.

Mode:

A mode is a status under which you can

execute a certain function. In the Preset

Song mode, you can select a preset song.

Random order:

The songs are selected and played back

randomly by the instrument—similar to the

shuffling of a deck of cards—when press-

ing the [PLAY/ STOP] button.

P01

You can play the keyboard along with the

preset song.

While a piano preset song is playing, hold

down the [METRONOME] button and press

the [+] or [-] button to change the song

tempo.

If you are using the metronome (page 17)

during preset song playback, press the [+]

or [-] button to change the song tempo. You

can also press keys to change the tempo.

The preset songs will not be transmitted via

MIDI.

Reference

Listening to the Preset Songs

14 • N1 Owner’s Manual

Select and start playback songs from the keyboard

You can also select and start playback songs by pressing the keys.

 Play back a particular song:

While holding down the [DEMO/SONG] button, press one of the C2–A2

keys.

 Play back all:

While holding down the [DEMO/SONG] button, press the A3 key.

 Play back randomly:

While holding down the [DEMO/SONG] button, press the A#3 key.



The selected preset song starts to play.

Preset Songs

C2 A2 A3

A#3

Display Key Title Composer

P01

C2 Nocturne, op.9-1 F. F. Chopin

P02

C#2 Mädchens Wünsch, 6 Chants polonaise F. Liszt

P03

D2 Fantaisie-Impromptu F. F. Chopin

P04

D#2 Aria, Goldberg-Variationen, BWV.988 J. S. Bach

P05

E2 Clair de lune C. A. Debussy

P06

F2 Sonate, K.380, L.23 D. Scarlatti

P07

F#2 Sonate für Klavier Nr.14 “Mondschein”, op.27-2 L. v. Beethoven

P08

G2 Sonate für Klavier Nr.5, K.283 W. A. Mozar t

P09

G#2 Valse, op.69-2 F. F. Chopin

P10

A2 Consolation No.3 F. Liszt

N1 Owner’s Manual • 15

Basic Operations and More

The following instructions provide all you need to know about the instrument to take full advantage of its versatile

and sophisticated functions.

Selecting Voices

Press and release the [PIANO/VOICE] button to select the Grand Piano 1 voice.

While holding down the [PIANO/VOICE] button, press the [+] or [-] button to

select a different voice.

Turn the [MASTER VOLUME] control to adjust the volume level while playing

the keyboard.

To understand the characteristics of various

voices, listen to demo songs for each voice

(page 16).

Display Voice Na m e Description

Grand Piano 1

Recorded samples from a full concert grand piano. Perfect for classi-

cal compositions as well as any other style that requires acoustic

piano.

Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music.

E.Piano 1

An electronic piano sound created by FM synthesis. Good for popu-

lar music.

E.Piano 2

The sound of an electric piano using hammer-struck metallic “tines.”

Soft tone when played lightly, and an aggressive tone when played

hard.

Harpsichord

The definitive instrument for baroque music. Since the strings of a

harpsichord are plucked, there is no touch response.

Basic Operations and More

16 • N1 Owner’s Manual

Listening to the Voice Demo Songs

Demo songs are provided that effectively demonstrate each of this instrument’s voices.

1 Engage the Demo Song mode.

While holding down the [DEMO/SONG] button, press the

[+] or [-] button until the “

d01

” appears on the display.

2 Select a demo song.

Press the [+] or [-] button to select a song.

3 Start playback.

Press the [PLAY/STOP] button to start playback.

While a demo song is playing, press the [+] or [-] button to select and play the

next or previous demo song.

4 Stop playback.

Press the [PLAY/STOP] button to stop playback.

3, 4

Simply press the [DEMO/SONG] button to

start playback of the demo song for the cur-

rently selected voice.

d01

You can play the keyboard along with the

demo song.

While a demo song is playing, press and

hold down the [METRONOME] button and

press the [+] or [-] button to change the

song tempo.

If you are using the metronome (page 17)

during demo song playback, press the [+]

or [-] button to change the song tempo. You

can also press keys to change the tempo.

The demo songs will not be transmitted via

MIDI.

Select and start playback songs from the keyboard

If you wish to select a particular demo song, press one of the C1–E1 keys while

holding down the [DEMO/SONG] button.



The selected demo song starts to play.

Demo Songs

Each of the voices features its own demo song that showcases the corresponding

voice.

The

d01

and

d05

songs are re-arranged excerpts from the original composi-

tions.

tion).

C1 E1

Display Key Voice Na m e Title Composer

d01

C1 Grand Piano 1 Un sospiro, 3 Études de concert F. Liszt

d02

C#1 Grand Piano 2 — —

d03

D1 E.Piano 1 — —

d04

D#1 E.Piano 2 — —

d05

E1 Harpsichord

Concerto a cembalo obbligato, 2 vio-

lini, viola e continuo No.7, BWV.1058

J. S. Bach

N1 Owner’s Manual • 17

Basic Operations and More

Using the Metronome

This instrument features a built-in metronome (a device that keeps an accurate tempo) that is convenient for prac-

ticing.

1 Start the metronome.

Press the [METRONOME] button to turn on the metronome.

2 Stop the metronome.

Turn off the metronome by pressing the [METRONOME] button.

1, 2

The beat indicator flashes

at the current tempo.

Setting range: 5 to 500 beats per minute

Default setting: 120

The metronome tempo is restored to the

default setting when the power is turned off.

When the song is selected, it becomes the

default tempo of the song automatically

during playback.

To reset the tempo to default value while the

metronome is stopped, press the [METRO-

NOME], [+] and [-] buttons simultaneously.

Adjusting the tempo

You can adjust the metronome tempo by pressing the [+] or [-] button while the

metronome is playing.

 To increase the tempo value in steps of one:

While the metronome is playing, press the [+] button.

Alternatively, press the C#5 key while holding down the [METRONOME]

button.

 To decrease the tempo value in steps of one:

While the metronome is playing, press the [-] button.

Alternatively, press the B4 key while holding down the [METRONOME]

button.

 To increase the tempo value in steps of ten:

While holding down the [METRONOME] button, press the D5 key.

 To decrease the tempo value in steps of ten:

While holding down the [METRONOME] button, press the A#4 key.

 To reset the tempo to default:

While the metronome is playing, press the [+] and [-] buttons simultane-

ously.

Alternatively, press the C5 key while holding down the [METRONOME]

button.

C5 D5B4

A#4C#5

Basic Operations and More

18 • N1 Owner’s Manual

Default setting: 0/4 (No downbeat)

The time signature of the metronome is

restored to the default setting when the

power is turned off.

Adjusting the time signature

While holding down the [METRONOME] button, press

one of the C3–F3 keys. The current setting appears on the

display while both controls are held.

The first beat is accented with a bell sound and the rest

with clicks. When the time signature is set to 0/4, clicks

sound in all beats.

Beat

C3 F3

Display Key Beat

C3 0/4 (No downbeat)

C#3 2/4

D3 3/4

D#3 4/4

E3 5/4

F3 6/4

Setting range: 1–20

Default setting: 10

The metronome volume setting is retained

even when the power is turned off.

Adjusting the volume

While holding down the [METRONOME] button, press one of the C1–G2 keys

to determine the volume. The current metronome volume setting appears on the

display while both controls are held.

C1(1) G2(20)A1(10)

The volume level increases as you press higher keys.

MAXMIN

N1 Owner’s Manual • 19

Basic Operations and More

Adjusting the Keyboard Touch (Touch Sensitivity)

You can select four different types of keyboard touch sensitivity — HARD, MEDIUM, SOFT or FIXED — to

match different playing styles and preferences.

While holding down the [PIANO/VOICE] button, press one of the A6–C7 keys

to select the desired touch sensitivity. The current touch type setting appears on

the display while both controls are held.

Adding Variations to the Sound — Reverb

The reverb effect reproduces the realistic acoustic ambience of grand piano.

Press the [REVERB] button to switch the reverb on or off.

A6 C7

Default setting: 2 (Medium)

The touch type is restored to the default set-

ting when the power is turned off.

This setting does not change the weight of

the keyboard.

Display Key Touch Type Description

OFF A6 Fixed

All notes are produced at the same volume no matter how hard the

keyboard is played.

1 A#6 Soft

Allows maximum loudness to be produced with relatively light key

pressure.

2 B6 Medium Produces a fairly “standard” keyboard response.

3 C7 Hard

Requires that the keys be played quite hard to produce maximum

loudness.

Lights up when the

REVERB is on.

Setting range: 1–20

Default setting: 5

The reverb depth is restored to the default

setting when the power is turned off.

To display the reverb depth setting, press

just the [REVERB] button.

Adjusting Reverb Depth

While holding down the [REVERB] button, press the [+] or [-] button to adjust

the reverb depth. The current reverb depth setting appears on the display while

both controls are held.

Basic Operations and More

20 • N1 Owner’s Manual

Transposition

This instrument’s Transpose function makes it possible to easily match the pitch of the keyboard in semitone inter-

vals to the range of a singer or other instruments.

For example, if you set the transposition amount to “5,” playing key C produces pitch F. In this way, you can play a

song as though it were in C major, and this instrument will transpose it to F major.

While holding down the [FUNCTION] button, press one of the F#2–F#3 keys to set

the desired amount of transposition. Holding down both controls shows the current

amount of transposition.

 To transpose the pitch down (in semitone steps):

Press one of the F

#2–B2 keys while holding the [FUNCTION] button.

 To transpose the pitch up (in semitone steps):

Press one of the C

#3–F#3 keys while holding the [FUNCTION] button.

 To initialize the normal pitch:

Press the C3 key while holding the [FUNCTION] button.

Default setting: 0 (Normal pitch)

The transposition amount is restored to the

default setting when the power is turned off.

F#3F#2

0-1

-2 +1 +3-4

-3-5 +2+4+5

-6 +6

Transpose up.Transpose down.

Normal pitch

N1 Owner’s Manual • 21

Basic Operations and More

Fine-tuning the Pitch

You can fine-tune the pitch of the entire instrument. This function is useful when you play this instrument along

with other instruments or CD music.

 To tune up (in about 0.2Hz steps):

While holding down the [FUNCTION] button, press the

[+] button. Holding down both buttons shows the current

pitch setting (Hz).

 To tune down (in about 0.2Hz steps):

While holding down the [FUNCTION] button, press the [-] button. Holding

down both buttons shows the current pitch setting (Hz).

 To restore standard pitch:

While holding down the [FUNCTION] button, press the [+] and [-] buttons

simultaneously. Holding down all three buttons shows the current pitch setting

(Hz).

The tuning setting is retained even when the

power is turned off.

Hz (Hertz):

This unit of measurement refers to the fre-

quency of a sound and represents the num-

ber of times a sound wave vibrates in a

second.

Setting range: 414.8–466.8Hz (=A3)

Default setting: 440.0Hz (=A3)

32.0

Example: 432.0Hz

Basic Operations and More

22 • N1 Owner’s Manual

Scale Tuning

You can select various scales. Equal Temperament is the most common contemporary piano tuning scale. However,

history has known numerous other scales, many of which serve as the basis for certain genres of music. You can

experience the tunings of these genres.

While holding down the [FUNCTION] button, press one of the C5–F#5 keys to

select the scale. Holding down both controls shows the current scale setting.

Default setting: Equal

The scale is restored to the default setting

when the power is turned off.

Display Key Scale Description

C5 Equal

The pitch range of each octave is divided equally into twelve

parts, with each half-step evenly spaced in pitch. This is the most

commonly used tuning in music today.

C#5 Pure Major These tunings preserve the pure mathematical intervals of each

scale, especially for triad chords (root, third, fifth). You can hear

this best in actual vocal harmonies — such as choirs and a cap-

pella singing.

D5 Pure Minor

D#5 Pythagorean

This scale was devised by the famous Greek philosopher and is

created from a series of perfect fifths, which are collapsed into a

single octave. The 3rd in this tuning are slightly unstable, but the

4th and 5th are beautiful and suitable for some leads.

E5 Mean-Tone

This scale was created as an improvement on the Pythagorean

scale, by making the major third interval more “in tune.” It was

especially popular from the 16th century to the 18th century. Han-

del, among others, used this scale.

F5 Werckmeister This composite scale combines the Werckmeister and Kirnberger

systems, which were themselves improvements on the mean-tone

and Pythagorean scales. The main feature of this scale is that

each key has its own unique character. The scale was used

extensively during the time of Bach and Beethoven, and even now

it is often used when performing period music on the harpsichord.

F#5 Kirnberger

F#5

Default setting: C

The base note is restored to the default set-

ting when the power is turned off.

Setting the Base Note for each scale

While holding down the [FUNCTION] button, press one of the C4–B4 keys.

Holding down both controls shows the current base note setting.

B4C4

F~ G A_

Key Base Note

C4 C

C#4 C#

D4 D

D#4Eb

E4 E

F4 F

Key Base Note

F#4F#

G4 G

G#4Ab

Key Base Note

A4 A

A#4 Bb

B4 B

Key Base Note

Example:

(Followed by a high bar if sharp)

GAb

(Followed by a low bar if flat)

N1 Owner’s Manual • 23

Recording your Performance

This instrument’s recording function enables you to record your performance. Follow the steps below to record and

play back your performance.

1 Select a voice for the recording.

While holding down the [PIANO/VOICE] button, press the [+] or [-] button to

select the desired voice (page 15). Use the [MASTER VOLUME] control to

adjust the volume to a comfortable listening level.

2 Engage the Record mode.

Press the [RECORD] button.



The [RECORD] button indicator lights up steadily, and the [PLAY/STOP] but-

ton indicator flashes.

Press the [RECORD] button again if you wish to cancel Record mode.

NOTICE

After you’ve recorded a performance on this instrument, starting to record another perfor-

mance will automatically erase the previously recorded data.

Audio recording and data recording

Cassette tape recordings use a different data format than this instrument. Cassette tapes record audio signals. On the

other hand, this instrument records information about the notes and voices being played and about the timing and

tempo of those notes. It does not record audio signals. When you play back a recorded performance on this instru-

ment, its internal tone generator reproduces the sound according to the recorded information.

3, 4, 5

You can also use the [MASTER VOLUME]

control to adjust the volume level during

playback.

You cannot engage the Record mode while

another song, such as a demo song, is

playing.

This instrument’s internal memory allows

the recording of one song (300KB; approx.

30,000 notes).

The recorded song data is retained even

when the power is turned off.

The recorded song to the instrument can be

saved to USB flash memory (page 25).

When a USB flash memory device is con-

nected to the instrument, the performance

is recorded to the USB flash memory

directly.

If there is not enough recording capacity

left, or if the files U00–U99 already exist in

the USB flash memory, “

FUL

” will appear

on the display and the Record mode cannot

be engaged.

Before using a USB flash memory device,

be sure to read “Precautions when using

the USB [TO DEVICE] terminal” on page 26.

FlashesLights up

Recording your Performance

24 • N1 Owner’s Manual

3 Start recording.

Recording starts as soon as you play the keyboard.

Alternatively, press the [PLAY/STOP] button to start recording.



The [RECORD] button indicator and the [PLAY/STOP] button indicator light

up.

4 Stop recording.

Press either the [RECORD] or [PLAY/STOP] button to

stop recording.



Data writing will begin.

When the recording is finished, the “

End

” appears on the

display for three seconds.

NOTICE

Do not turn off the power to the instrument or disconnect the USB flash memory device,

while the instrument is recording the data (while “- - -“ is displayed ). Otherwise, all

recorded data, including the data being recorded, will be lost.

5 Play back the recorded performance.

Press the [PLAY/STOP] button to start playback of the recorded performance.

Playing Back the Song Recorded to the Instrument

You can play back the song recorded to the instrument using the Record function (page 23). You can also play the

keyboard along with the playback.

Refer to page 27 to playback the song recorded to a USB flash memory device.

1 Engage User Song mode.

While holding down the [DEMO/SONG] button, press the

[+] or [-] button until “

USr

” appears on the display.

2 Start playback.

Press the [PLAY/STOP] button to start playback.

3 Stop playback.

Press the [PLAY/STOP] button again to stop playback.

If the metronome was on when you started

recording, you’ll be able to keep time with

the metronome while recording, but the

metronome sound will not be recorded.

If the memory becomes full during record-

ing, “

FUL

” will appear on the display and

recording will stop automatically. (All

recorded data up to that point will be

retained.)

If you wish to erase previously recorded

data to the instrument, press the [PLAY/

STOP] button to start recording, then press

it again to stop recording. Do not connect

any USB device during this operation.

The song data recorded to a USB flash

memory device can be erased by using a

computer.

When you record to a USB flash memory

device directly, if you select another song or

disconnect the USB device after recording,

the recorded performance cannot be played

back by pressing the [PLAY/STOP] button.

Refer to “Listening to songs in USB Flash

Memory” on page 27 to play back the song.

End

2, 3

User song:

In this manual, the performance data

recorded to this instrument is called a “User

song”.

Usr

N1 Owner’s Manual • 25

Recording your Performance

Saving Your Recorded Performance to USB Flash Memory

The recorded user song data on this instrument can be saved to a USB flash memory device. Before using a USB

flash memory device, be sure to read “Precautions when using the USB [TO DEVICE] terminal” on page 26.

1 Engage Saving mode.

Make sure that a USB flash memory device is connected to the instrument, then

while holding the [FUNCTION] button, press the [PLAY/STOP] button.



“

xx” (xx is a number) appears on the display after “

.”

If you wish to cancel saving, press any button other than [PLAY/STOP] button

before you go on to the next step.

2 Save the data.

Press the [PLAY/STOP] button.



Data writing will begin.

When the saving is finished, “

End

” appears on the dis-

play for three seconds.

NOTICE

Do not turn off the power to the instrument or disconnect the USB flash memory device,

while the instrument is saving the data to the USB device (while “- - -“ is displayed ). Oth-

erwise, all data, including the data being saved, will be lost.

Songs recorded on this instrument are

saved under the file names of “USER-

SONGxx.mid” (xx is a number 00–99) in

the “USER FILES” folder.

The number of available file containers is

100 (

U00

–

U99

End

Recording your Performance

26 • N1 Owner’s Manual

Precautions when using the USB

[TO DEVICE] terminal

This instrument features a built-in USB [TO DEVICE]

terminal for connection to USB storage devices. When

connecting a USB device to the terminal, be sure to

handle the USB device with care. Follow the important

precautions below.

NOTE

For more information about the handling of USB devices, refer to the owner’s manual of

the USB device.

 Compatible USB devices

• USB storage devices (flash memory, etc.)

The instrument does not necessarily support all com-

mercially available USB devices. Yamaha cannot guar-

antee operation of USB devices that you purchase.

Before purchasing a USB device for use with this

instrument, please visit the following web page:

http://music.yamaha.com/download/

NOTE

Other USB devices such as a computer keyboard or mouse cannot be used.

 Connecting USB device

• When connecting a USB device to the USB [TO

DEVICE] terminal, make sure that the connector on

the device is appropriate and that it is connected in

the proper direction.

• Though the instrument supports the USB 1.1 stan-

dard, you can connect and use a USB 2.0 storage

device with the instrument. However, note that the

transfer speed is that of USB 1.1.

Using USB Storage Devices

By connecting the instrument to a USB storage device,

you can save data you’ve created to the connected

device, as well as read data from the connected device.

NOTE

Although CD-R/RW drives can be used to read data to the instrument, they cannot be

used for saving data.

 The number of USB storage device to be

used

Only one USB storage devices can be connected to the

USB [TO DEVICE] terminal.

 Formatting USB storage media

When accessing a USB storage device or media, a

message may appear prompting you to format the

device/media. If so, execute the Format operation

(page 29).

NOTICE

The format operation overwrites any previously existing

data. Make sure that the media you are formatting does not

contain important data.

 To protect your data (write-protect)

To prevent important data from being inadvertently

erased, apply the write-protect provided with each

storage device or media. If you are saving data to the

USB storage device, make sure to disable write-pro-

tect.

 Connecting/removing USB storage device

Before removing the media from the device, make sure

that the instrument is not accessing data (such as in the

Save and Format operations).

NOTICE

Avoid frequently turning the power on/off to the USB storage

device, or connecting/disconnecting the device too often.

Doing so may result in the operation of the instrument

“freezing” or hanging up. While the instrument is accessing

data (such as during Save and Format operations) or is

mounting the USB storage device (shortly after the connec-

tion), do NOT unplug the USB connector, do NOT remove the

media from the device, and do NOT turn the power off to

either device. Doing so may corrupt the data on either or

both devices.

N1 Owner’s Manual • 27

Listening to songs in USB Flash Memory

You can conveniently connect a USB flash memory device to the instrument and listen to songs recorded to that

device (on a computer). You can also save your recorded performances on the instrument to the connected device

and play those songs back as well. Before using a USB flash memory, be sure to read “Precautions when using the

USB [TO DEVICE] terminal” on page 26.

1 Engage the USB Song mode.

Make sure that the USB flash memory device is connected

to the instrument. Then press the [+] or [-] button while

holding the [DEMO/SONG] button until the message

“

xx” or “

xx” (xx is a number 00–99) appears on the display.

The message “

xx” is displayed when no “

xx” songs exist.

If the USB flash memory device is not connected or there is no USB songs, nei-

ther “

xx” nor “

xx” appears.

2 Select a USB song.

Press the [+] or [-] button to select the song you want to play.

•

U00

–

U99

..... Select the number of the desired USB song, that of the per-

formance which you’ve recorded and saved using this

instrument (page 25) and play the song.

•

F00

–

F99

..... Select the number of the desired USB song, that which

you’ve saved by using a computer and play the song.

•

U.AL

................ Play all USB songs in sequence.

•

U.rd

................ Play all USB songs continuously in random order.

3 Start playback.

Press the [PLAY/STOP] button to start playback.

4 Stop playback.

Press the [PLAY/STOP] button to stop playback.

3, 4

USB song:

In this manual, the performance data saved

to a USB flash memory device is called a

“USB song.”

The display may not appear immediately,

depending on the number of the folders in

the USB flash memory.

U00

Certain songs may take more time than oth-

ers to start playback. Keep in mind that this

also affects the time between playback of

successively played songs.

The playback voice can be changed.

You can play the keyboard along with the

USB song. The voice of the song played is

assigned to the voice playing on the key-

board.

While a USB song is playing, hold down the

[METRONOME] button and press the [+] or

[-] button to change the song tempo.

If you are using the metronome (page 17)

during USB song playback, press the [+] or

[-] button to change the song tempo. You

can also press keys to change the tempo.

Default setting: International

Character Code

If the song cannot be loaded, you may need to change the character code setting.

 International

Files with western alphabetical names (including umlaut or diacritic

marks) can be loaded (files with names in Japanese cannot be loaded).

Turn the power on while holding the [FUNCTION] and [REVERB] but-

tons.

 Japanese

Files with western alphabetical names and Japanese names can be loaded;

however, file names including umlauts or diacritic marks cannot be

loaded.

Turn the power on while holding the [FUNCTION] and [METRONOME]

buttons.

Listening to songs in USB Flash Memory

28 • N1 Owner’s Manual

“

xx”:

The smallest number among

U00

–

U99

is selected. If there are no any “

xx” songs,

the smallest number among

F00

–

F99

is selected.

If a USB flash memory device is not con-

nected or there are no USB songs, the

“

Usr

” song is selected.

Selecting songs with the keyboard

 Forward 1 song:

Press the C#5 key while holding down the [DEMO/SONG] button.

 Rewind 1 song:

Press the B4 key while holding down the [DEMO/SONG] button.

 Forward 10 songs:

Press the D5 key while holding down the [DEMO/SONG] button.

 Rewind 10 songs:

Press the A#4 key while holding down the [DEMO/SONG] button.

 Select the “

xx” (xx is a number 00–99) song:

Press the C5 key while holding down the [DEMO/SONG] button.

 Play back all:

Press the G5 key while holding down the [DEMO/SONG] button.

 Play back randomly:

Press the G#5 key while holding down the [DEMO/SONG] button.

C5 D5 G5B4

C#5

G#5A#4

What is SMF (Standard MIDI File)?

The SMF (Standard MIDI File) format is one

of the most common and widely compatible

sequence formats used for storing

sequence data. There are two variations:

Format 0 and Format 1. A large number of

MIDI devices are compatible with SMF For-

mat 0, and most commercially available

MIDI sequence data is provided in SMF

Format 0.

The user song is saved as SMF Format 0.

Data format

This instrument can play back files of SMF Format 0 and Format 1 (Standard

MIDI file).

When playing songs copied to a USB flash memory device from a computer or

other device, the songs must be stored either in the USB flash memory’s root

directory or a first-level/second level folder in the root directory. Songs stored in

these locations can be played as song data. Songs stored in third-level folders

created inside a second-level folder cannot be played by this instrument.

When copying song data from computer to USB flash memory, make sure to

save it by using SMF Format 0 and Format 1. Keep in mind that songs recorded

on other devices may use a variety of voices not available on this instrument and

hence may sound different than the original songs.

USB flash memory

Can be played.

Cannot be played.

Song

File

Song

Folder

Song

File

Song

Folder

Song

File

Song

Folder

(Root)

N1 Owner’s Manual • 29

Formatting USB Flash Memory

Certain USB flash memory devices may require formatting before they can be used by this instrument. Before

using a USB flash memory device, be sure to read “Precautions when using the USB [TO DEVICE] terminal” on

page 26.

NOTICE

If you format a USB flash memory that already contains data, all of the data will be erased. Be

careful not to erase important data when using the format function.

1 Engage the Format mode.

After connecting the USB flash memory device to be formatted to the instru-

ment, press the [RECORD] button while holding the [FUNCTION] button.



The message “

For

” (Format) appears on the display.

2 Start Formatting.

After pressing the [PLAY/STOP] button, a “

n Y

” message appears on the dis-

play. Press the [+] button to execute the formatting operation. Press the [-] button

to cancel formatting.



When the formatting is finished, “

End

” appears on the display for three sec-

onds.

NOTICE

Do not turn off the power to the instrument or disconnect the USB flash memory device,

while the instrument is formatting the USB device (while “- - -“ is displayed ). Doing so

may damage the data or the USB flash memory itself.

3 Exit from the Format mode.

Press any one of the buttons.

For

30 • N1 Owner’s Manual

Backing up Data and Initializing the Settings

Backup data in internal memory

The following data will be saved to internal memory of the instrument. The data is maintained even when the power

is turned off.

• Metronome volume (page 18)

• Fine-tuning of the pitch (page 21)

• Character code (page 27)

• User song data recorded to the instrument (page 23)

Initializing the data

When you initialize the data, all data, excluding the character code setting and the User song, will be initialized and

reset to the factory default settings.

While holding down the [METRONOME] button and the [REVERB] button,

turn on the power to the instrument.



While the instrument is initializing the data, “

CLr

”

appears on the display.

NOTICE

Do not turn off the power to this instrument while it is initializing the data in its internal

memory (while “

CLr

” is displayed).

If this instrument somehow becomes dis-

abled or malfunctions, turn off the power to

the instrument, then perform the initializa-

tion procedure.

CLr

N1 Owner’s Manual • 31

Connections

Connectors

CAUTION

Before connecting the instrument to other electronic components, turn off the power to all the

components. Before turning the power on or off to all components, set all volume levels to

minimum (0). Otherwise, electrical shock or damage to the components may result.

q AUX IN [L/L+R] [R] jacks

The stereo outputs from another instrument can be connected to these jacks,

allowing the sound of an external instrument to be reproduced via the N1’s

speakers. Refer to the diagram below and use audio cables to make the connec-

tions.

CAUTION

When the instrument’s AUX IN jacks are connected to an external device, first turn on the

power to the external device, then to the instrument. Reverse this order when you turn the

power off.

eq w

Refer to the “Panel Controls and Terminals” on page 8 for information

on the location of the connectors.

 Rear

Front

(keyboard

side) 

Use only the AUX IN [L/L+R] jack for con-

nection with a mono device.

AUX OUT

OUTPUT

AUX IN

audio cable

phone plug

(standard)

phone plug

(standard)

phone plug

(standard)

phone plug

(standard)

Instrument

Tone Generator

Connections

32 • N1 Owner’s Manual

w AUX OUT [L/L+R] [R] jacks

These jacks let you connect the instrument to external powered speaker systems,

for playing in larger venues at higher volumes. Refer to the diagram below and

use audio cables to make the connections.

CAUTION

When the instrument’s AUX OUT jacks are connected to an external audio system, first

turn on the power to the instrument, then to the external audio system. Reverse this order

when you turn the power off.

e MIDI [IN] [OUT] connectors

Use MIDI cables to connect external MIDI devices to these connectors. Refer to

“About MIDI” on page 33 for more information.

Use audio cables and adaptor plugs with no

resistance.

When the sound from the AUX OUT jacks is

routed to the AUX IN jacks, the input sound

will be output from the speaker of the

instrument. The output sound may be

excessively loud and may cause noise.

Use only the AUX OUT [L/L+R] jacks for

connection with a mono device.

AUX INAUX OUT

audio cable

phone plug

(standard)

phone plug

(standard)

Powered speaker

Instrument

N1 Owner’s Manual • 33

About MIDI

MIDI (Musical Instrument Digital Interface) is a global format standard for perfor-

mance data transmission and reception between electronic musical instruments.

Connecting musical instruments that support MIDI via MIDI cables enables you to

transfer performance and setting data between multiple musical instruments. Using

MIDI, you can also achieve more advanced performances than using just a single

musical instrument.

Connecting to a Computer

Connecting this instrument to a computer using the MIDI connectors enables you to

transfer MIDI data between the instrument and the computer. For example, perfor-

mance data of this instrument can be sent to and saved on the computer.

CAUTION

When connecting the instrument to a computer, first turn off the power to both the instrument

and the computer before connecting any cables. After making connections, turn on the power

to the computer first, then to the instrument.

Use an optional USB-MIDI interface (such as a Yamaha UX16) to connect this

instrument’s MIDI connectors to the computer’s USB port. You also need to install

the USB-MIDI driver on the computer correctly to use the interface. For more infor-

mation, refer to the user’s manual that came with the USB interface device.

You need a dedicated MIDI cable (optional)

to make a MIDI connection.

Since the transmission or reception of MIDI

data can vary depending on the type of

MIDI device, each MIDI device can transmit

or receive only data and commands that are

compatible with other connected MIDI

devices.

Please check the “MIDI Implementation

Chart” on the Data List to find out what

MIDI data and commands your devices can

transmit or receive. Refer to page 5 for the

“Data List.”

Voice demo and piano preset song data are

not transmitted via MIDI.

Transmits MIDI data.

Receives MIDI data.

You must install a software application on

the computer to be able to transfer MIDI

data between this instrument and a com-

puter.

A USB-MIDI interface

(such as a Yamaha UX16)

USB port

Instrument

Computer

MIDI

[OUT]

MIDI

[IN]

About MIDI

34 • N1 Owner’s Manual

Local Control On/Off

“Local Control” refers to the fact that, normally, the keyboard of this instrument con-

trols its internal tone generator, allowing the internal voices to be played directly

from the keyboard. This situation is “Local Control On,” since the internal tone gen-

erator is controlled locally by its own keyboard. Local control can be turned Off,

however, so that the keyboard of this instrument does not play the internal voices,

but the appropriate MIDI information is still transmitted via the MIDI OUT connec-

tor when notes are played on the keyboard. At the same time, the internal tone gener-

ator responds to MIDI information received via the MIDI IN connector.

While holding down the [FUNCTION] button, press the C6 key. Pressing the C6

key repeatedly toggles between Local Control On and Off.

N1 Owner’s Manual • 35

Message List

* When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes.

* Press the [+] or [-] button to exit from these message displays.

Message Comment

001

Indicates failure in accessing the USB flash memory or media.

 Disconnect the USB flash memory device or media and connect it again to the USB [TO DEVICE] terminal. If this

message appears repeatedly, use another USB flash memory device or media.

002

Indicates that the song data cannot be loaded correctly.

004

Indicates that the song data is too large to be loaded.

005

The USB flash memory device or media has not been formatted.

 Format the USB flash memory device or media after making sure on your computer that the USB flash memory or

media you are formatting does not contain important data (page 29).

006

Indicates that the protected song data cannot be loaded.

007

There is no song data.

008

The USB flash memory device or media is not connected.

 Connect a USB flash memory device or media to the USB [TO DEVICE] terminal.

014

Indicates failure in saving the file, because the same name folder exists in the USB flash memory device or media.

 Change the folder name using your computer.

020

This USB device cannot be used.

 Use only USB flash memory devices compatible with the instrument.

022

Displayed when the total amount of USB flash memory or USB hub has become too large.

 Refer to “Using USB Storage Devices” on page 26.

023

Indicates failure in connecting the USB flash memory or media.

 Disconnect the USB flash memory device or media and connect it again.

024

Communication with the USB device has been shut down because of the overcurrent to the USB device.

 Disconnect the device from the USB [TO DEVICE] terminal, then turn on the power of the instrument.

---

Processing the current operation.

CLr

Initializing to the default settings.

E53

Indicates failure in setting the keyboard.

 Please contact your nearest Yamaha dealer or authorized distributor.

E54

End

Displayed when the current operation is completed.

FUL

Displayed when internal memory is full.

Displayed when the total amount of files or folders has become too large.

Displayed when the media is full.

For

Indicates that the instrument has engaged format mode for the USB storage device.

Prompts you to confirm or cancel the formatting operation.

Pro

Indicates that the USB storage device or media is write-protected.

Appendix

36 • N1 Owner’s Manual

Troubleshooting

* The message list (page 35) is also provided for your reference.

Problem Possible Cause and Solution

The instrument does not turn on.

The instrument has not been plugged in properly. Securely insert the female plug into the socket

on the instrument, and the male plug into a proper AC outlet (page 9).

Noise is heard from the speakers

or headphones.

The noise may be due to interference caused by the use of a mobile phone in close proximity to

the instrument. Turn off the mobile phone, or use it further away from the instrument.

A click or pop is heard when the

power is turned on or off.

Electrical current is being applied to the instrument. This is normal.

The overall volume is low, or no

sound is heard.

• The Volume is set too low: set it to an appropriate level using the [MASTER VOLUME] control

(page 10).

• Make sure a pair of headphones is not connected to the headphones jack (page 11).

• Make sure that Local Control (page 34) is on.

The pitch and/or tone of the

Piano Voices in certain ranges do

not sound right.

The Piano Voices attempt to precisely simulate actual piano sounds. However, as a result of sam-

pling algorithms, overtones in some ranges may sound exaggerated, producing a somewhat dif-

ferent pitch or tone. This is normal, and no cause for concern.

Sound is not heard on a particu-

lar key.

Keyboard may not function normally if the key was pressed when the power was turned on. Turn

off the power and turn it again to reset the function. Do not touch any keys when turning the

power on (page 10).

Sound input to the AUX IN jacks

is interrupted.

The output volume of the external device connected to this instrument is too low. Increase the

output volume of the external device. The volume level reproduced via this instrument’s speakers

can be adjusted by using the [MASTER VOLUME] control.

The damper pedal has no effect.

• The pedal cord may not be securely connected to the [PEDAL] jack. Be sure to insert the pedal

cord all the way until the metal part of the cord plug disappears from view (page 38).

• The damper pedal was pressed when the power was turned on. This is not a malfunction; press

the pedal again to reset the function.

The USB flash memory device

has hung up (stopped).

• Disconnect the device and connect it to the instrument again.

• The USB flash memory is not compatible with the instrument. Only use the USB flash memory

device whose compatibility has been confirmed by Yamaha (page 26).

Maintenance

When the surface of the instrument loses luster, wipe the instrument evenly with a cloth moistened with some special piano cleaner.

For more information, contact the store where you purchased the instrument.

N1 Owner’s Manual • 37

Assembling the Unit

CAUTION

• Be careful not to confuse parts, and be sure to install all

parts in the correct direction. Please assemble the unit in

the appropriate sequence.

• Assembly should be carried out by at least two persons.

• Be sure to use only the included screws. Do not use any

other screws. Inappropriate screws may cause damage or

malfunction of the product. Be sure to insert screws of the

proper size in the correct hole locations.

• Be sure to tighten all screws upon completing assembly of

each unit.

• To disassemble, reverse the assembly sequence.

Remove all parts other than the main unit from the box.

Confirm that all parts shown in the illustration are pro-

vided. Do not remove the main unit from the box prior to

step 3.

1 Attach the legs to the speaker box.

1-1 Attach the leg (L) to the side of the speaker box

using three short screws (6 x 20 mm).

1-2 While pressing the bracket on the leg against the

speaker box, securely tighten the screws that were

attached.

1-3 Follow the same steps to attach the leg (R).

1-4 Raise the speaker box.

2 Detach the speaker net.

2-1 Remove the two screws. These screws are used in

step 6.

2-2 Detach the speaker net.

3 Mount the main unit.

3-1 Mount the main unit on the speaker box while

aligning the rear of the main unit with the rear of the

speaker box, and each lateral side of the main unit

with the lateral side of the legs.

Have a Phillips-head (+) screwdriver of the appropriate size ready.

Main Unit

Leg (R)Leg (L)

6 × 30 mm

long screws × 10

6 × 20 mm

short screws × 6

Speaker box

AC power cord × 1

Be sure to lay the packaging sheet

or other protective sheet on the

floor and under the instrument.

1-1

1-2

CAUTION

Be careful not to pinch your fingers when mounting the

main unit.

Do not hold here.

2-2

2-1

Hold here.

Assembling the Unit

38 • N1 Owner’s Manual

3-2 Move the main unit slightly toward the rear side,

then adjust its position so that the projecting pin on

the metal brackets on the bottom of the main unit

will lock into the notch on the metal brackets of the

legs (L/R).

4 Secure the main unit.

Secure the main unit using ten long screws (6 x 30 mm).

Connect the speaker cord and pedal cord.

5-1 Remove the vinyl tie attaching the speaker cord and

pedal cord.

5-2 Insert the speaker cord plug into the connector so

that the tab extends toward the front when viewed

from the rear.

5-3 Insert the pedal cord plug into the pedal connector

in the correct orientation.

5-4 Use vinyl ties to bundle the speaker cord and pedal

cord.

6 Attach the speaker net.

6-1 Attach the speaker net.

6-2 Affix the speaker net with the screws unloosed at

step 2.

7 Insert the AC power cord plug into the AC

INLET.

For models that feature a voltage selector: Set the voltage

selector to an appropriate voltage.

8 Rotate the adjuster until it comes in firm

contact with the floor surface.

Connecting the pedal cord

Insert the pedal cord securely until the metal part

of the cord plug disappears from view. Other-

wise, the pedal may not function properly.

5-1

5-4

5-1

5-4

5-2

5-3

 After completing the assembly, please

check the following.

• Are there any parts left over?

 Review the assembly procedure and correct any errors.

•

Is the instrument clear of doors and other movable fixtures?

 Move the instrument to an appropriate location.

• Does the instrument make a rattling noise when you shake

it?

 Tighten all screws.

• Is the power cord inserted securely into the sockets?

 Check the connection.

• If the main unit creaks or is otherwise unsteady when you

play on the keyboard, refer to the assembly diagrams and

retighten all screws.

240

127

110

220

N1 Owner’s Manual • 39

Specifications

* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify

products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please

check with your Yamaha dealer.

Optional Accessories

Size/Weight

Dimensions

Width 1,465mm (57-11/16")

Height

995mm (39-3/16")

With music rest: 1,170mm (46-1/16")

Depth 618mm (24-5/16")

Weight 124kg (273lbs., 6oz)

Control

Interface

Keyboard

Number of Keys 88 (A-1–C7)

White Acrylic resin

Black Phoenolic resin

Touch Sensitivity Fixed/Soft/Medium/Hard

Sensor

System

Hammer Sensors Non-contact optical fiber

Key Sensors Non-contact optical fiber

Pedal

Number of Pedals 3

Half Pedal Yes

Functions Damper (with half-pedal effect), Sostenuto, Soft

Cabinet

Fallboard Ye s

Music Rest Yes

Voices

Tone

Generation

Tone Generation Technology Spatial Acoustic Sampling

Stereo Sustain Samples Yes

Key-off Samples Yes

String Resonance Yes

Polyphony Number of Polyphony (Max.) 256

Preset Number of Voices 5

Effects Types Reverb Yes

Songs

Preset Number of Songs 10 preset songs, 5 voice demo songs

Recording

Number of Songs 1 song (300KB; approx. 30,000 notes)

Number of Tracks 1

Functions

Overall

Controls

Metronome Yes

Tem po Yes

Transpose Yes

Tuning Yes

Scale Type 7 types

Connectivity Connectors

MIDI IN/OUT

Headphones PHONES x 2

AUX IN [L/L+R] [R]

AUX OUT [L/L+R] [R]

USB TO DEVICE Yes

Amplifiers and

Speakers

Amplifiers 25W x 1 + 30W x 5

Speakers 8cm x 3 + 13cm x 2 + 16cm x 1

Accessories Included Accessories

Owner’s Manual, AC Power Cord, Felt Key Cover,

Bench (included or optional depending on locale),

My Yamaha Product User Registration

Headphones HPE-160

USB-MIDI Interface UX16

40 • N1 Owner’s Manual

AC IN....................................................................................... 9

Accessories.............................................................................. 5

Assembly............................................................................... 37

AUX IN ................................................................................. 31

AUX OUT............................................................................. 32

Backup ...................................................................................30

Base Note .............................................................................. 22

Character Code..................................................................... 27

Connectors............................................................................. 31

Data format ........................................................................... 28

Data List .................................................................................. 5

Demo Song............................................................................ 16

DEMO/SONG ................................................... 13, 16, 24, 27

Display..................................................................................... 8

Fallboard.................................................................................. 9

Formatting ............................................................................. 29

FUNCTION ....................................................... 20, 21, 22, 34

Headphone............................................................................. 11

Initializing ............................................................................. 30

Key cover -> Fallboard......................................................... 9

Local Control........................................................................ 34

MASTER VOLUME .......................................................... 10

Message List ......................................................................... 35

METRONOME .................................................................... 17

Metronome ............................................................................ 17

MIDI....................................................................................... 33

Music rest .............................................................................. 12

Pedals......................................................................................11

PHONES ................................................................................11

PIANO/VOICE.....................................................................15

Pitch ........................................................................................21

PLAY/STOP.......................................................13, 16, 24, 27

Playback

Demo Song

....................................................................16

Preset Song....................................................................13

USB song .......................................................................27

User song .......................................................................24

Power ......................................................................................10

Precautions...............................................................................6

Preset Song ............................................................................13

Quick Operation Guide .......................................................43

Recording...............................................................................23

Reverb.....................................................................................19

Saving .....................................................................................25

Scale........................................................................................22

Specifications........................................................................39

Tempo.....................................................................................17

Time signature ......................................................................18

Touch Sensitivity..................................................................19

Transposition.........................................................................20

Troubleshooting....................................................................36

Tuning.....................................................................................22

USB Song ..............................................................................27

USB storage device..............................................................26

USB TO DEVICE ................................................................26

User song ...............................................................................24

Voice.......................................................................................15

Voice Demo...........................................................................16

Volume

Master Volume

.............................................................10

Metronome Volume.....................................................18

Index

N1 Owner’s Manual • 41

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and

electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in

accordance with your national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative

effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your

waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further

information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local

authorities or dealer and ask for the correct method of disposal.

(weee_eu)

42 • N1 Owner’s Manual

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instruc-

tions contained in this manual, meets FCC requirements.

Modifications not expressly approved by Yamaha may

void your authority, granted by the FCC, to use the prod-

uct.

2. IMPORTANT: When connecting this product to acces-

sories and/or another product use only high quality

shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions. Failure

to follow instructions could void your FCC authorization

to use this product in the USA.

3. NOTE: This product has been tested and found to com-

ply with the requirements listed in FCC Regulations, Part

15 for Class “B” digital devices. Compliance with these

requirements provides a reasonable level of assurance

that your use of this product in a residential environment

will not result in harmful interference with other electronic

devices. This equipment generates/uses radio frequen-

cies and, if not installed and used according to the

instructions found in the users manual, may cause inter-

ference harmful to the operation of other electronic

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

devices. Compliance with FCC regulations does not

guarantee that interference will not occur in all installa-

tions. If this product is found to be the source of interfer-

ence, which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using

one of the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to dis-

tribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Corporation

of America, Electronic Service Division, 6600 Orangetho-

rpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products dis-

tributed by Yamaha Corporation of America or its subsid-

iaries.

FCC INFORMATION (U.S.A.)

N1 Owner’s Manual • 43

Quick Operation Guide / Übersicht über die Kurzbefehle

+6+3+1-2-4-6

0+2+4+5

F# G# A#D#C#

CD E F GAB-5 -3 -1

P.rd

P.AL

Usr

P09P07P04P02

P06 P08 P10P01 P03 P05

d04d02

d01 d03

MIN MAX

d05

2/4 4/4

6/45/43/40

531

1286

14 16

171513

2018 +10

-10

-1

U00

+10

U.AL

U.rd-10

-1

⁄0 ⁄1

⁄2 ⁄3 ⁄4 ⁄5

⁄6

xcvbnm,

While holding down the button on the control panel, press one of the corresponding

keys shown below to select songs, or set parameters.

z Voice Demo Playback (p.16)

x Preset Song Playback (p.14)

c Preset Song Playback: all (p.14)

v Preset Song Playback: random (p.14)

b User Song Playback (p.24)

n USB Song Playback (p.27)

m USB Song Playback: all (p.27)

, USB Song Playback: random (p.27)

. Metronome Volume (p.18)

⁄0 Metronome Time Signature (p.18)

⁄1 Metronome/Song Tempo (p.17)

⁄2 Transpose (p.20)

⁄3 Base Note (p.22)

⁄4 Scale (p.22)

⁄5 Local Control on/off (p.34)

⁄6 Touch Sensitivity (p.19)

Um Songs auszuwählen oder Parameter einzustellen, halten Sie die Bedienfeldtaste gedrückt

und schlagen Sie gleichzeitig eine der betreffenden nachstehend gezeigten Tastaturtasten an.

z Voice-Demo-Wiedergabe (S.16)

x Preset-Song-Wiedergabe (S.14)

c Preset-Song-Wiedergabe:

alle nacheinander (S.14)

v Preset-Song-Wiedergabe:

zufällige Reihenfolge (S.14)

b User-Song-Wiedergabe (S.24)

n USB-Song-Wiedergabe (S.27)

m USB-Song-Wiedergabe:

alle nacheinander (S.27)

, USB-Song-Wiedergabe:

zufällige Reihenfolge (S.27)

. Metronomlautstärke (S.18)

⁄0 Metronom-Taktart (S.18)

⁄1 Metronom-/Song-Tempo (S.17)

⁄2 Transponierung (S.20)

⁄3 Grundton (S.22)

⁄4 Skala (S.22)

⁄5 Lokalsteuerung ein/aus (S.34)

⁄6 Anschlagempfindlichkeit (S.19)

44 • N1 Owner’s Manual

Guide de fonctionnement rapide / Guía de funcionamiento rápida

+6+3+1-2-4-6

0+2+4+5

F# G# A#D#C#

CD E F GAB-5 -3 -1

P.rd

P.AL

Usr

P09P07P04P02

P06 P08 P10P01 P03 P05

d04d02

d01 d03

MIN MAX

d05

2/4 4/4

6/45/43/40

531

1286

14 16

171513

2018 +10

-10

-1

U00

+10

U.AL

U.rd-10

-1

⁄0 ⁄1

⁄2 ⁄3 ⁄4 ⁄5

⁄6

xcvbnm,

Tout en maintenant les touches du panneau de commande enfoncées, appuyez sur

l'une des touches ci-dessous pour sélectionner un morceau ou régler un paramètre.

z Reproduction de voix

de démonstration (p. 16)

x Reproduction de morceaux

présélectionnés (p. 14)

c Reproduction de morceaux

présélectionnés : tous (p. 14)

v Reproduction de morceaux

présélectionnés : aléatoire (p. 14)

b Reproduction de morceaux

utilisateur (p. 24)

Reproduction de morceaux USB

(p. 27)

m Reproduction de morceaux

USB : tous (p. 27)

, Reproduction de morceaux

USB : aléatoire (p. 27)

. Volume du métronome (p. 18)

⁄0 Type de mesure du métronome (p. 18)

⁄1 Tempo du métronome/morceau (p. 17)

⁄2 Transposition (p. 20)

⁄3 Note fondamentale (p. 22)

⁄4 Gamme (p. 22)

⁄5 Activation/désactivation

de la commande locale (p. 34)

⁄6 Sensibilité au toucher (p. 19)

Pulse el botón del panel de control y, sin soltarlo, pulse cualquiera de las teclas correspon-

dientes indicadas a continuación para seleccionar canciones o configurar parámetros.

z Reproducción de

demostración de voz (pág.16)

x Reproducción de canción

predefinida (pág.14)

c Reproducción de canción

predefinida: todas (pág.14)

v Reproducción de canción

predefinida: aleatoria (pág.14)

b Reproducción de canción

del usuario (pág.24)

Reproducción de canción USB

(pág.27)

Reproducción de canción USB:

todas (pág.27)

, Reproducción de canción USB:

aleatoria (pág.27)

. Volumen del metrónomo (pág.18)

⁄0 Compás del metrónomo (pág.18)

⁄1 Tempo de metrónomo/canción (pág.17)

⁄2 Transposición (pág.20)

⁄3 Nota base (pág.22)

⁄4 Escala (pág.22)

⁄5 Activación/desactivación

de Local Control (pág.34)

⁄6 Sensibilidad a la pulsación (pág.19)

For details of products, please contact your nearest Yamaha

representative or the authorized distributor listed below.

Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou

au distributeur le plus proche de vous figurant dans la liste suivante.

Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten

Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen

Bestimmungsländern erhältlich.

Para detalles sobre productos, contacte su tienda Yamaha más

cercana o el distribuidor autorizado que se lista debajo.

CANADA

Yamaha Canada Music Ltd.

135 Milner Avenue, Scarborough, Ontario,

M1S 3R1, Canada

Tel: 416-298-1311

U.S.A.

Yamaha Corporation of America

6600 Orangethorpe Ave., Buena Park, Calif. 90620,

U.S.A.

Tel: 714-522-9011

MEXICO

Yamaha de México S.A. de C.V.

Calz. Javier Rojo Gómez #1149,

Col. Guadalupe del Moral

C.P. 09300, México, D.F., México

Tel: 55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.

Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi,

CEP 04534-013 Sao Paulo, SP. BRAZIL

Tel: 011-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A.

Sucursal de Argentina

Olga Cossettini 1553, Piso 4 Norte

Madero Este-C1107CEK

Buenos Aires, Argentina

Tel: 011-4119-7000

PANAMA AND OTHER LATIN

AMERICAN COUNTRIES/

CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.

Torre Banco General, Piso 7, Urbanización Marbella,

Calle 47 y Aquilino de la Guardia,

Ciudad de Panamá, Panamá

Tel: +507-269-5311

THE UNITED KINGDOM/IRELAND

Yamaha Music Europe GmbH (UK)

Sherbourne Drive, Tilbrook, Milton Keynes,

MK7 8BL, England

Tel: 01908-366700

GERMANY

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: 04101-3030

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH

Branch Switzerland in Zürich

Seefeldstrasse 94, 8008 Zürich, Switzerland

Tel: 044-387-8080

AUSTRIA

Yamaha Music Europe GmbH Branch Austria

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-60203900

CZECH REPUBLIC/HUNGARY/

ROMANIA/SLOVAKIA/SLOVENIA

Yamaha Music Europe GmbH

Branch Austria (Central Eastern Europe Office)

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-602039025

POLAND/LITHUANIA/LATVIA/ESTONIA

Yamaha Music Europe GmbH

Branch Sp.z o.o. Oddzial w Polsce

ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland

Tel: 022-500-2925

BULGARIA

Dinacord Bulgaria LTD.

Bul.Iskarsko Schose 7 Targowski Zentar Ewropa

1528 Sofia, Bulgaria

Tel: 02-978-20-25

MARTA

Olimpus Music Ltd.

The Emporium, Level 3, St. Louis Street Msida

MSD06

Tel: 02133-2144

THE NETHERLANDS/

BELGIUM/LUXEMBOURG

Yamaha Music Europe Branch Benelux

Clarissenhof 5-b, 4133 AB Vianen, The Netherlands

Tel: 0347-358 040

FRANCE

Ya m a h a M u si c E ur o p e

7 rue Ambroise Croizat, Zone d'activités Pariest,

77183 Croissy-Beaubourg, France

Tel: 01-64-61-4000

ITALY

Yamaha Music Europe GmbH, Branch Italy

Viale Italia 88, 20020 Lainate (Milano), Italy

Tel: 02-935-771

SPAIN/PORTUGAL

Yamaha Music Europe GmbH Ibérica, Sucursal

en España

Ctra. de la Coruna km. 17, 200, 28230

Las Rozas (Madrid), Spain

Tel: 91-639-8888

GREECE

Philippos Nakas S.A. The Music House

147 Skiathou Street, 112-55 Athens, Greece

Tel: 01-228 2160

SWEDEN

Yamaha Music Europe GmbH Germany filial

Scandinavia

J. A. Wettergrens Gata 1, Box 30053

S-400 43 Göteborg, Sweden

Tel: 031 89 34 00

DENMARK

Yamaha Music Europe GmbH, Tyskland – filial

Denmark

Generatorvej 6A, DK-2730 Herlev, Denmark

Tel: 44 92 49 00

FINLAND

F-Musiikki Oy

Kluuvikatu 6, P.O. Box 260,

SF-00101 Helsinki, Finland

Tel: 09 618511

NORWAY

Yamaha Music Europe GmbH Germany -

Norwegian Branch

Grini Næringspark 1, N-1345 Østerås, Norway

Tel: 67 16 77 70

ICELAND

Skifan HF

Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland

Tel: 525 5000

RUSSIA

Yamaha Music (Russia)

Room 37, bld. 7, Kievskaya street, Moscow,

121059, Russia

Tel: 495 626 5005

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: +49-4101-3030

Yamaha Corporation,

Asia-Pacific Sales & Marketing Group

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2313

TURKEY/CYPRUS

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: 04101-3030

OTHER COUNTRIES

Ya m a h a M u si c G ul f FZ E

LOB 16-513, P.O.Box 17328, Jubel Ali,

Dubai, United Arab Emirates

Tel: +971-4-881-5868

THE PEOPLE’S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co.,Ltd.

2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,

Shanghai, China

Tel: 021-6247-2211

HONG KONG

Tom Lee Music Co., Ltd.

11/F., Silvercord Tower 1, 30 Canton Road,

Tsimshatsui, Kowloon, Hong Kong

Tel: 2737-7688

INDIA

Yamaha Music India Pvt. Ltd.

5F Ambience Corporate Tower Ambience Mall Complex

Ambience Island, NH-8, Gurgaon-122001, Haryana, India

Tel: 0124-466-5551

INDONESIA

PT. Yamaha Musik Indonesia (Distributor)

PT. Nusantik

Gedung Yamaha Music Center, Jalan Jend. Gatot

Subroto Kav. 4, Jakarta 12930, Indonesia

Tel: 021-520-2577

KOREA

Yamaha Music Korea Ltd.

8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,

Kangnam-Gu, Seoul, Korea

Tel: 02-3467-3300

MALAYSIA

Yamaha Music (Malaysia) Sdn., Bhd.

Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,

Petaling Jaya, Selangor, Malaysia

Tel: 03-78030900

PHILIPPINES

Yupangco Music Corporation

339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,

Makati, Metro Manila, Philippines

Tel: 819-7551

SINGAPORE

Yamaha Music (Asia) Pte., Ltd.

#03-11 A-Z Building

140 Paya Lebor Road, Singapore 409015

Tel: 6747-4374

TAIWAN

Yamaha KHS Music Co., Ltd.

3F, #6, Sec.2, Nan Jing E. Rd. Taipei.

Taiwan 104, R.O.C.

Tel: 02-2511-8688

THAILAND

Siam Music Yamaha Co., Ltd.

4, 6, 15 and 16th floor, Siam Motors Building,

891/1 Rama 1 Road, Wangmai,

Pathumwan, Bangkok 10330, Thailand

Tel: 02-215-2622

OTHER ASIAN COUNTRIES

Yam a ha C or p o r at i o n,

Asia-Pacific Sales & Marketing Group

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2313

AUSTRALIA

Yam a ha M u si c Au s t ra l i a P t y. Lt d .

Level 1, 99 Queensbridge Street, Southbank,

Victoria 3006, Australia

Tel: 3-9693-5111

NEW ZEALAND

Music Works LTD

P.O.BOX 6246 Wellesley, Auckland 4680,

New Zealand

Tel: 9-634-0099

COUNTRIES AND TRUST

TERRITORIES IN PACIFIC OCEAN

Yam a ha C or p o r at i o n,

Asia-Pacific Sales & Marketing Group

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2313

NORTH AMERICA

CENTRAL & SOUTH AMERICA

EUROPE

AFRICA

MIDDLE EAST

ASIA

OCEANIA

DMI1

AvantGrand Special Site

http://www.avant-grand.com/

Yamaha Home Keyboards Home Page

http://music.yamaha.com/homekeyboard/

Yamaha Manual Library

http://www.yamaha.co.jp/manual/

WV41250

U.R.G., Digital Musical Instruments Division

109POAPx.x-xxC0

Printed in China

Transcripción de documentos

ENGLISH DEUTSCH FRANÇAIS ESPAÑOL Before using this instrument, be sure to read “PRECAUTIONS” on pages 6 – 7. When assembling or transporting the unit, consult a qualified AvantGrand dealer. (Refer to page 37 for the assembly instructions.) Achten Sie darauf, vor Einsatz dieses Instruments die „VORSICHTSMASSNAHMEN“ auf Seiten 6-7 durchzulesen. Wenden Sie sich bezüglich Zusammenbau und Transport des Gerätes an einen qualifizierten AvantGrand-Händler. (Lesen Sie auf Seite 37 für Anweisungen zur Montage.) Owner’s Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones Avant d'utiliser cet instrument, lisez attentivement la section « PRÉCAUTIONS D'USAGE » aux pages 6-7. Lors de l'assemblage ou du transport de l'unité, consultez un revendeur qualifié AvantGrand. (Reportez-vous à la page 37 pour obtenir des instructions sur le montage.) Antes de utilizar el instrumento, lea la sección “PRECAUCIONES”, en las páginas 6-7. Al montar o transportar la unidad, consulte a un distribuidor cualificado de AvantGrand. (Consulte las instrucciones de montaje en la página 37.) EN DE FR ES SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. See bottom of Keyboard enclosure for graphic symbol markings. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This product MAY contain a small nonrechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. Warning: Do not attempt to recharge, disassemble, or incinerate this type of battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by applicable laws. Note: In some areas, the servicer is required by law to return the defective parts. However, you do have the option of having the servicer dispose of these parts for you. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. The lightning flash with arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock. NOTICE: Service charges incurred due to lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. IMPORTANT NOTICE: All Yamaha electronic products are tested and approved by an independent safety testing laboratory in order that you may be sure that when it is properly installed and used in its normal and customary manner, all foreseeable risks have been eliminated. DO NOT modify this unit or commission others to do so unless specifically authorized by Yamaha. Product performance and/or safety standards may be diminished. Claims filed under the expressed warranty may be denied if the unit is/ has been modified. Implied warranties may also be affected. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. NAME PLATE LOCATION: The graphic below indicates the location of the name plate. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. Model Serial No. Purchase Date 92-469-q (bottom) 2 • N1 Owner’s Manual Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The above warning is located on the bottom of the unit. IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 8 9 10 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 12 13 14 Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. (UL60065_03) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. • This applies only to products distributed by Yamaha Music U.K. Ltd. (2 wires) N1 Owner’s Manual • 3 Features Hybrid Piano Combining over one hundred years of superb piano craftsmanship with the latest advanced technologies, Yamaha is proud to introduce a true hybrid acoustic/digital piano that meets the demands of contemporary musicians. Authentic Acoustic Piano Touch with Special Grand Piano Action and Piano Keyboard This innovative keyboard delivers the rich expressive quality of an acoustic grand piano, thanks to its finely nuanced touch and exceptional response. Drawing on over one hundred years of expertise in crafting grand pianos, Yamaha has created a unique and yet wholly traditional piano action mechanism for the AvantGrand. The AvantGrand offers a special action that features the same configuration as the action of an acoustic grand piano. The movement of the hammers and the weight distribution of each hammer have been meticulously adjusted to give this instrument an exceptionally smooth feel. The keyboard also features real-wood keys, just as on a real grand piano, letting you enjoy an authentic touch and feel that goes far beyond any existing digital piano. The Realistic Ambience of Grand Piano Voice The AvantGrand features Yamaha’s original “Spatial Acoustic Sampling” tone-generation sampling technology for the grand piano voices. The voices are sampled from four positions around a grand piano, not only from the left and right (as on most digital pianos), but also from the center and rear. The instrument also utilizes the “Spatial Acoustic Speaker System,” in which each speaker is equipped with its own dedicated amplifier. This is essential for preserving the sonic integrity of each frequency range and making sure that the nuances of each sound are reproduced naturally with absolute clarity. These technologies provide rich resonance and sonic power heretofore only available on an actual grand piano. Best Condition without Tuning Unlike acoustic pianos, the AvantGrand does not need to be tuned. It always stays perfectly in tune even after long-time use. Flexible Volume Control The AvantGrand gives you full control over the instrument volume, letting you adjust the level just as desired. Also, you can play or listen in total privacy through one or two pairs of headphones. 4 • N1 Owner’s Manual Table of Contents PRECAUTIONS .....................................................6 Introduction Getting started playing your new Avant Grand! Panel Controls and Terminals ..................................... 8 Playing the Keyboard ................................................... 9 Using the Pedals...................................................... 11 Using Headphones (option) ..................................... 11 Music Rest ............................................................... 12 Reference Appendix This section includes a list of display messages, Quick Operation Guide and other information. Message List ............................................................... 35 Troubleshooting ......................................................... 36 Assembling the Unit ................................................... 37 Specifications ............................................................. 39 Index ............................................................................ 40 Quick Operation Guide* ............................................. 43 * This is a quick reference for operation of the functions assigned to the buttons and keyboard. This section explains how to make detailed settings for the instrument’s various functions. Listening to the Preset Songs ................................... 13 Basic Operations and More ....................................... 15 Selecting Voices ...................................................... 15 Listening to the Voice Demo Songs......................... 16 Using the Metronome............................................... 17 Adjusting the Keyboard Touch (Touch Sensitivity) ................................................... 19 Adding Variations to the Sound — Reverb .............. 19 Transposition ........................................................... 20 Fine-tuning the Pitch ................................................ 21 Scale Tuning ............................................................ 22 Recording your Performance .................................... 23 Playing Back the Song Recorded to the Instrument ...................................................... 24 Saving Your Recorded Performance to USB Flash Memory.............................................. 25 Listening to songs in USB Flash Memory................ 27 Formatting USB Flash Memory ................................. 29 Backing up Data and Initializing the Settings .......... 30 Backup data in internal memory .............................. 30 Initializing the data ................................................... 30 Connections ................................................................ 31 Connectors............................................................... 31 About MIDI................................................................... 33 Connecting to a Computer ....................................... 33 Local Control On/Off ................................................ 34 Accessories Owner’s Manual AC Power Cord Felt Key Cover Bench* * Included or optional depending on locale. My Yamaha Product User Registration* * The PRODUCT ID on the sheet will be needed when you fill out the User Registration form. Data List You can download various MIDI-related reference materials, such as the MIDI Data Format and MIDI Implementation Chart, from the Yamaha Manual Library. Connect to the Internet, visit the following website, type the model name of your instrument (such as “N1”) in the Model Name text box, then click the Search button. Yamaha Manual Library http://www.yamaha.co.jp/manual/ N1 Owner’s Manual • 5 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord Water warning • Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. • Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. • Use only the supplied power cord/plug. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. • Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. • Never insert or remove an electric plug with wet hands. Fire warning • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. Do not open • This instrument contains no user-serviceable parts. Do not open the instrument or attempt to disassemble or modify the internal components in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. If you notice any abnormality • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel. • The power cord or plug becomes frayed or damaged. • It emits unusual smells or smoke. • Some object has been dropped into the instrument. • There is a sudden loss of sound during use of the instrument. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/Power cord Connections • Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. • When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. Handling caution Assembly • Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury. Location • Do not place the instrument in an unstable position where it might accidentally fall over. • When transporting or moving the instrument, always use two or more people. Attempting to lift the instrument by yourself may damage your back, result in other injury, or cause damage to the instrument itself. • Before moving the instrument, remove all connected cables. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. DMI-3 6 • N1 Owner’s Manual • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. • Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. • Do not insert a finger or hand in any gaps on the fallboard or instrument. Also take care that the fallboard does not pinch your finger. • Never insert or drop paper, metallic, or other objects into the gaps on the fallboard, panel or keyboard. This could cause physical injury to you or others, damage to the instrument or other property, or operational failure. • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. Using the bench (If included) • Do not place the bench in an unstable position where it might accidentally fall over. • Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or for any other purpose might result in accident or injury. • Only one person should sit on the bench at a time, in order to prevent the possibility of accident or injury. • Do not attempt to adjust the bench height while sitting on the bench, since this can cause excessive force to be imposed on the adjustment mechanism, possibly resulting in damage to the mechanism or even injury. • If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool. 1/2  Saving data IMPORTANT – Check your power supply – Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a “minus” screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel. NOTICE • The song data saved to internal memory of this instrument is retained even when the power is turned off. However, the data could be lost due to malfunction or incorrect operation. Save important data to a USB storage device (page 25). • To protect against data loss through media damage, we recommend that you save your important data onto two USB storage device. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.  Handling and Maintenance • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. • Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.) • Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • Bumping the surface of the instrument with metal, porcelain, or other hard objects can cause the finish to crack or peel. Use caution. • When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. • Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch the instrument’s finish. Information  About copyrights • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.  About this manual • The illustrations and displays as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. • During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth. Transporting / Placing If you move to another location, transport the instrument horizontally. Do not lean it up against a wall or stand it up side down. Do not subject the instrument to excessive vibration or shock. Do not hold here. Do not hold here. CAUTION When moving the instrument, always hold the bottom of the main unit. Be sure not to hold the headphone jack box or the speaker net. Improper handling can result in damage to the instrument or personal injury. Place the instrument away from the wall by at least 15 cm to optimize and enhance the sound effect. If you find the instrument shaky or unstable after installing, insert the included felt strips. For details, refer to the instructions supplied with the felt strips. Do not hold here. Tuning Unlike an acoustic piano, the instrument does not need to be tuned. It always stays perfectly in tune. However, if you feel something wrong concerning the keyboard touch, contact your Yamaha dealer. DMI-3 2/2 N1 Owner’s Manual • 7 Introduction Panel Controls and Terminals Overview (Bottom surface) Jacks and Terminals (page 31) Music rest (page 12) Control panel (See below.) Fallboard (pages 9, 10) (Bottom surface) [AC IN] connector (page 9) [MASTER VOLUME] control (page 10) Power switch (page 10) USB [TO DEVICE] terminal (page 26) [PHONES] jacks (page 11) Pedals (page 11) Control Panel q Display ..............................................................................See below. w [DEMO/SONG] button........................................pages 13, 16, 24, 27 q e [REVERB] button .................................................................. page 19 r [METRONOME] button ......................................................... page 17 t [PIANO/VOICE] button.......................................................... page 15 w t e y r u y [FUNCTION] button .......................................... pages 20, 21, 22, 34 i u [RECORD] button ................................................................. page 23 i [+]/[-] button o [PLAY/STOP] button...........................................pages 13, 16, 24, 27 o  Display Check the operation on the display of the top panel as you use the instrument. The display indicates different values, as shown below, depending on the operation. The display turns dark after the values are set. d01 (Song number) 5 (Parameter value) For more information, refer to the instructions on each function. The message list (page 35) is also available for your reference. 8 • N1 Owner’s Manual Playing the Keyboard 1 Connecting the power cord 1-1 Set the voltage selector and insert the power cord plug to the [AC IN] connector. Refer to the “Panel Controls and Terminals” on page 8 for information on the location of the [AC IN] connector. [AC IN] connector Voltage Selector For models that feature a voltage selector: Set the voltage selector to an appropriate voltage. Voltage Selector Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a “minus” screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, connect the AC power cord to the AC IN and an AC wall outlet. A plug adaptor may be also provided in some areas to match the pin configuration of the AC wall outlets in your area. WARNING Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used. (The voltage rating appears on the name plate on the bottom panel). Connecting the unit to an inappropriate AC supply can seriously damage the internal circuitry and may even pose a shock hazard! 1-2 Insert the plug on the other end of the power cord to a standard AC outlet. WARNING Use only the AC power cord supplied with the instrument. If the supplied power cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! WARNING The type of AC power cord provided with the instrument may be different depending on the country in which the instrument was purchased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.) Do NOT modify the plug provided with the instrument. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. 2 (The shape of the plug differs depending on locale.) Opening the fallboard Using the hand grip on the front, lift open the fallboard. CAUTION Hold the fallboard with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to avoid catching fingers (yours or others, especially children’s) between the fallboard and the unit. CAUTION Do not place objects such as a piece of metal or paper on top of the fallboard. Small objects placed on the fallboard may fall inside the unit when the fallboard is opened and may be nearly impossible to remove. This could cause electric shock, short circuit, fire or other serious damage to the instrument. If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. CAUTION Be careful to avoid catching your fingers when opening the fallboard. N1 Owner’s Manual • 9 Playing the Keyboard 3 Turning the power on Press the [ ] power switch located on the right of the keyboard. This turns the power on, and the power indicator located below the left end of the keyboard lights up.  A swirl graphic appears in the display located on the left of the keyboard and the instrument starts up when the swirl in the display stops. MASTER VOLUME MIN MAX power switch lights up NOTICE Do not press any keys until the instrument has completely started up (approx. eight seconds after turning on the switch). Doing so may cause some keys to not sound normally. 4 Playing the keyboard Play the keyboard to produce sound. Adjusting the volume While playing the keyboard, adjust the volume level by using the [MASTER VOLUME] control located at the left of the panel. CAUTION Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged. 5 MASTER VOLUME The level decreases. The level increases. MIN MAX USB TO Turning the power off Press the [ ] power switch again. The power indicator turns off when the power turns off. NOTICE A small amount of electrical current remains even after the power switch is turned off. If you plan not to use the instrument for a long period of time, be sure to unplug the instrument from the AC outlet. 6 Closing the fallboard Grip the fallboard, and close it gently. CAUTION Be careful to avoid catching your fingers when closing the fallboard. 10 • N1 Owner’s Manual Playing the Keyboard Using the Pedals The instrument has three foot pedals that produce a range of expressive effects similar to those produced by the pedals on an acoustic piano. Damper (Right) Pedal The damper pedal functions in the same way as a damper pedal on an acoustic piano. When the damper pedal is pressed, notes sustain longer. Releasing the pedal immediately stops (damps) any sustained notes. The damper pedal features a half-pedal function. What is the half-pedal function? This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you press the pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a bit murky and loud with too much sustain, you can release the pedal half way to subdue the sustain (murkiness). When you press the damper pedal here, the notes you play before you release the pedal sustain longer. Sostenuto (Center) Pedal If you play a note or chord on the keyboard and press the sostenuto pedal while the note(s) are held, those notes will sustain as long as you hold the pedal (as if the damper pedal had been pressed) but all subsequently played notes will not be sustained. This makes it possible to sustain a chord, for example, while other notes are played “staccato.” When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal. Soft (Left) Pedal The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes that are already playing when it is pressed. Using Headphones (option) Connect a pair of headphones to one of the [PHONES] jacks located on the bottom left of the instrument. When the headphones are plugged into either of the [PHONES] jacks, the internal speaker system is automatically shut off Two [PHONES] jacks are provided. You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones, you can plug them into either jack.) CAUTION Do not listen to the instrument at a high volume level through headphones for a long period of time, or your hearing may be damaged. MASTER VOLUME MIN MAX USB TO DEVICE PHONES Standard stereo phone plug N1 Owner’s Manual • 11 Playing the Keyboard Music Rest To raise the music rest: 1 2 Pull the music rest up and toward yourself as far as it will go. 3 Lower the music rest so that it rests on the metal supports. Flip down the two metal supports at the left and right on the rear of the music rest. To lower the music rest: 1 2 3 Pull the music rest toward yourself as far as it will go. Raise the two metal supports (at the rear of the music rest). Gently lower the music rest backward until it is all the way down. CAUTION Do not try to use the music rest in a half-raised position. When raising or lowering the music rest, do not release your hands from the music rest until it is all the way up or down. 12 • N1 Owner’s Manual Reference Listening to the Preset Songs This instrument features a variety of built-in piano preset songs. You can simply listen to these songs. 1 2 3, 4 1 2 Engage the Preset Song mode. While holding down the [DEMO/SONG] button, press the [+] or [-] button until “P01” appears on the display. Song: P01 Select a preset song. Press the [+] or [-] button to select a song. • P01–P10 ..... Select a preset song number and play only the selected song. • P.AL ................ Play all preset songs in sequence. • P.rd ................ Play all preset songs continuously in random order. 3 4 Start playback. Press the [PLAY/STOP] button to start playback. While a piano preset song is playing, press the [+] or [-] button to change to the next or previous piano song. Stop playback. Press the [PLAY/STOP] button to stop playback. In this manual, performance data is called a “Song.” This includes preset songs and demo songs. Mode: A mode is a status under which you can execute a certain function. In the Preset Song mode, you can select a preset song. Random order: The songs are selected and played back randomly by the instrument—similar to the shuffling of a deck of cards—when pressing the [PLAY/ STOP] button. You can play the keyboard along with the preset song. While a piano preset song is playing, hold down the [METRONOME] button and press the [+] or [-] button to change the song tempo. If you are using the metronome (page 17) during preset song playback, press the [+] or [-] button to change the song tempo. You can also press keys to change the tempo. The preset songs will not be transmitted via MIDI. N1 Owner’s Manual • 13 Listening to the Preset Songs Select and start playback songs from the keyboard You can also select and start playback songs by pressing the keys.  Play back a particular song: While holding down the [DEMO/SONG] button, press one of the C2–A2 keys.  Play back all: While holding down the [DEMO/SONG] button, press the A3 key.  Play back randomly: While holding down the [DEMO/SONG] button, press the A#3 key. A#3 C2 A2 A3  The selected preset song starts to play. Preset Songs Display Key P01 C2 Title P02 C#2 Mädchens Wünsch, 6 Chants polonaise F. Liszt P03 D2 Fantaisie-Impromptu F. F. Chopin P04 D#2 Aria, Goldberg-Variationen, BWV.988 J. S. Bach P05 E2 Clair de lune C. A. Debussy Nocturne, op.9-1 Composer F. F. Chopin P06 F2 Sonate, K.380, L.23 D. Scarlatti P07 F#2 Sonate für Klavier Nr.14 “Mondschein”, op.27-2 L. v. Beethoven P08 G2 Sonate für Klavier Nr.5, K.283 W. A. Mozart P09 G#2 Valse, op.69-2 F. F. Chopin P10 A2 Consolation No.3 F. Liszt 14 • N1 Owner’s Manual Basic Operations and More The following instructions provide all you need to know about the instrument to take full advantage of its versatile and sophisticated functions. Selecting Voices Press and release the [PIANO/VOICE] button to select the Grand Piano 1 voice. While holding down the [PIANO/VOICE] button, press the [+] or [-] button to select a different voice. Turn the [MASTER VOLUME] control to adjust the volume level while playing the keyboard. Display Voice Name To understand the characteristics of various voices, listen to demo songs for each voice (page 16). Description Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano. 1 Grand Piano 1 2 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music. 3 E.Piano 1 An electronic piano sound created by FM synthesis. Good for popular music. 4 E.Piano 2 The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when played lightly, and an aggressive tone when played hard. 5 Harpsichord The definitive instrument for baroque music. Since the strings of a harpsichord are plucked, there is no touch response. N1 Owner’s Manual • 15 Basic Operations and More Listening to the Voice Demo Songs Demo songs are provided that effectively demonstrate each of this instrument’s voices. 1 2 3, 4 1 Engage the Demo Song mode. While holding down the [DEMO/SONG] button, press the [+] or [-] button until the “d01” appears on the display. d01 2 Select a demo song. Press the [+] or [-] button to select a song. 3 Start playback. Press the [PLAY/STOP] button to start playback. While a demo song is playing, press the [+] or [-] button to select and play the next or previous demo song. 4 Stop playback. Press the [PLAY/STOP] button to stop playback. Select and start playback songs from the keyboard If you wish to select a particular demo song, press one of the C1–E1 keys while holding down the [DEMO/SONG] button. C1 E1  The selected demo song starts to play. Demo Songs Each of the voices features its own demo song that showcases the corresponding voice. The d01 and d05 songs are re-arranged excerpts from the original compositions. The other demo songs are Yamaha’s original pieces (©2010 Yamaha Corporation). Display Key d01 C1 Grand Piano 1 d02 C#1 Grand Piano 2 — — d03 D1 E.Piano 1 — — d04 D#1 E.Piano 2 — — Harpsichord Concerto a cembalo obbligato, 2 violini, viola e continuo No.7, BWV.1058 J. S. Bach d05 E1 16 • N1 Owner’s Manual Voice Name Title Un sospiro, 3 Études de concert Composer F. Liszt Simply press the [DEMO/SONG] button to start playback of the demo song for the currently selected voice. You can play the keyboard along with the demo song. While a demo song is playing, press and hold down the [METRONOME] button and press the [+] or [-] button to change the song tempo. If you are using the metronome (page 17) during demo song playback, press the [+] or [-] button to change the song tempo. You can also press keys to change the tempo. The demo songs will not be transmitted via MIDI. Basic Operations and More Using the Metronome This instrument features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing. 1, 2 1 Start the metronome. Press the [METRONOME] button to turn on the metronome. The beat indicator flashes at the current tempo. 2 Stop the metronome. Turn off the metronome by pressing the [METRONOME] button. Adjusting the tempo Setting range: 5 to 500 beats per minute Default setting: 120 You can adjust the metronome tempo by pressing the [+] or [-] button while the metronome is playing. The metronome tempo is restored to the default setting when the power is turned off.  To increase the tempo value in steps of one: While the metronome is playing, press the [+] button. Alternatively, press the C#5 key while holding down the [METRONOME] button. When the song is selected, it becomes the default tempo of the song automatically during playback.  To decrease the tempo value in steps of one: While the metronome is playing, press the [-] button. Alternatively, press the B4 key while holding down the [METRONOME] button.  To increase the tempo value in steps of ten: While holding down the [METRONOME] button, press the D5 key.  To decrease the tempo value in steps of ten: While holding down the [METRONOME] button, press the A#4 key.  To reset the tempo to default: While the metronome is playing, press the [+] and [-] buttons simultaneously. Alternatively, press the C5 key while holding down the [METRONOME] button. A#4 To reset the tempo to default value while the metronome is stopped, press the [METRONOME], [+] and [-] buttons simultaneously. C#5 B4 C5 D5 N1 Owner’s Manual • 17 Basic Operations and More Default setting: 0/4 (No downbeat) Adjusting the time signature While holding down the [METRONOME] button, press one of the C3–F3 keys. The current setting appears on the display while both controls are held. The first beat is accented with a bell sound and the rest with clicks. When the time signature is set to 0/4, clicks sound in all beats. C3 0 Beat F3 Display Key Beat 0 C3 0/4 (No downbeat) 2 C#3 2/4 3 D3 3/4 4 D#3 4/4 5 E3 5/4 6 F3 6/4 Setting range: 1–20 Default setting: 10 Adjusting the volume While holding down the [METRONOME] button, press one of the C1–G2 keys to determine the volume. The current metronome volume setting appears on the display while both controls are held. MIN C1(1) MAX A1(10) G2(20) The volume level increases as you press higher keys. 18 • N1 Owner’s Manual The time signature of the metronome is restored to the default setting when the power is turned off. The metronome volume setting is retained even when the power is turned off. Basic Operations and More Adjusting the Keyboard Touch (Touch Sensitivity) You can select four different types of keyboard touch sensitivity — HARD, MEDIUM, SOFT or FIXED — to match different playing styles and preferences. While holding down the [PIANO/VOICE] button, press one of the A6–C7 keys to select the desired touch sensitivity. The current touch type setting appears on the display while both controls are held. A6 Display OFF Key A6 Touch Type C7 Description Fixed All notes are produced at the same volume no matter how hard the keyboard is played. 1 A#6 Soft Allows maximum loudness to be produced with relatively light key pressure. 2 B6 Medium Produces a fairly “standard” keyboard response. 3 C7 Hard Requires that the keys be played quite hard to produce maximum loudness. Default setting: 2 (Medium) The touch type is restored to the default setting when the power is turned off. This setting does not change the weight of the keyboard. Adding Variations to the Sound — Reverb The reverb effect reproduces the realistic acoustic ambience of grand piano. Lights up when the REVERB is on. Press the [REVERB] button to switch the reverb on or off. Adjusting Reverb Depth While holding down the [REVERB] button, press the [+] or [-] button to adjust the reverb depth. The current reverb depth setting appears on the display while both controls are held. Setting range: 1–20 Default setting: 5 The reverb depth is restored to the default setting when the power is turned off. To display the reverb depth setting, press just the [REVERB] button. N1 Owner’s Manual • 19 Basic Operations and More Transposition This instrument’s Transpose function makes it possible to easily match the pitch of the keyboard in semitone intervals to the range of a singer or other instruments. For example, if you set the transposition amount to “5,” playing key C produces pitch F. In this way, you can play a song as though it were in C major, and this instrument will transpose it to F major. While holding down the [FUNCTION] button, press one of the F#2–F#3 keys to set the desired amount of transposition. Holding down both controls shows the current amount of transposition. F#2 F#3 Default setting: 0 (Normal pitch) The transposition amount is restored to the default setting when the power is turned off. C3 -6 -4 -2 +1 +3 +6 -5 -3 -1 0 +2 +4+5 Transpose down. Transpose up. Normal pitch  To transpose the pitch down (in semitone steps): Press one of the F#2–B2 keys while holding the [FUNCTION] button.  To transpose the pitch up (in semitone steps): Press one of the C#3–F#3 keys while holding the [FUNCTION] button.  To initialize the normal pitch: Press the C3 key while holding the [FUNCTION] button. 20 • N1 Owner’s Manual Basic Operations and More Fine-tuning the Pitch You can fine-tune the pitch of the entire instrument. This function is useful when you play this instrument along with other instruments or CD music.  To tune up (in about 0.2Hz steps): While holding down the [FUNCTION] button, press the [+] button. Holding down both buttons shows the current pitch setting (Hz). 32.0 Example: 432.0Hz  To tune down (in about 0.2Hz steps): While holding down the [FUNCTION] button, press the [-] button. Holding down both buttons shows the current pitch setting (Hz). The tuning setting is retained even when the power is turned off. Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Setting range: 414.8–466.8Hz (=A3) Default setting: 440.0Hz (=A3)  To restore standard pitch: While holding down the [FUNCTION] button, press the [+] and [-] buttons simultaneously. Holding down all three buttons shows the current pitch setting (Hz). N1 Owner’s Manual • 21 Basic Operations and More Scale Tuning You can select various scales. Equal Temperament is the most common contemporary piano tuning scale. However, history has known numerous other scales, many of which serve as the basis for certain genres of music. You can experience the tunings of these genres. While holding down the [FUNCTION] button, press one of the C5–F#5 keys to select the scale. Holding down both controls shows the current scale setting. F#5 Default setting: Equal The scale is restored to the default setting when the power is turned off. C5 Display Key Scale Description The pitch range of each octave is divided equally into twelve parts, with each half-step evenly spaced in pitch. This is the most commonly used tuning in music today. 1 C5 Equal 2 C#5 Pure Major 3 D5 Pure Minor 4 D#5 Pythagorean This scale was devised by the famous Greek philosopher and is created from a series of perfect fifths, which are collapsed into a single octave. The 3rd in this tuning are slightly unstable, but the 4th and 5th are beautiful and suitable for some leads. 5 E5 Mean-Tone This scale was created as an improvement on the Pythagorean scale, by making the major third interval more “in tune.” It was especially popular from the 16th century to the 18th century. Handel, among others, used this scale. 6 F5 Werckmeister 7 F#5 Kirnberger These tunings preserve the pure mathematical intervals of each scale, especially for triad chords (root, third, fifth). You can hear this best in actual vocal harmonies — such as choirs and a cappella singing. This composite scale combines the Werckmeister and Kirnberger systems, which were themselves improvements on the mean-tone and Pythagorean scales. The main feature of this scale is that each key has its own unique character. The scale was used extensively during the time of Bach and Beethoven, and even now it is often used when performing period music on the harpsichord. Default setting: C Setting the Base Note for each scale While holding down the [FUNCTION] button, press one of the C4–B4 keys. Holding down both controls shows the current base note setting. C4 B4 Key Base Note Key Base Note Key Base Note Key C4 C D#4 Eb F#4 F# A4 A C#4 C# E4 E G4 G A#4 Bb D4 D F4 F G#4 Ab B4 B Example: F~ F# (Followed by a high bar if sharp) 22 • N1 Owner’s Manual G G A_ Ab (Followed by a low bar if flat) Base Note The base note is restored to the default setting when the power is turned off. Recording your Performance This instrument’s recording function enables you to record your performance. Follow the steps below to record and play back your performance. Audio recording and data recording Cassette tape recordings use a different data format than this instrument. Cassette tapes record audio signals. On the other hand, this instrument records information about the notes and voices being played and about the timing and tempo of those notes. It does not record audio signals. When you play back a recorded performance on this instrument, its internal tone generator reproduces the sound according to the recorded information. 1 3, 4, 5 2 1 2 Select a voice for the recording. While holding down the [PIANO/VOICE] button, press the [+] or [-] button to select the desired voice (page 15). Use the [MASTER VOLUME] control to adjust the volume to a comfortable listening level. Engage the Record mode. Press the [RECORD] button.  The [RECORD] button indicator lights up steadily, and the [PLAY/STOP] button indicator flashes. Lights up Flashes Press the [RECORD] button again if you wish to cancel Record mode. NOTICE After you’ve recorded a performance on this instrument, starting to record another performance will automatically erase the previously recorded data. You can also use the [MASTER VOLUME] control to adjust the volume level during playback. You cannot engage the Record mode while another song, such as a demo song, is playing. This instrument’s internal memory allows the recording of one song (300KB; approx. 30,000 notes). The recorded song data is retained even when the power is turned off. The recorded song to the instrument can be saved to USB flash memory (page 25). When a USB flash memory device is connected to the instrument, the performance is recorded to the USB flash memory directly. If there is not enough recording capacity left, or if the files U00–U99 already exist in the USB flash memory, “FUL” will appear on the display and the Record mode cannot be engaged. Before using a USB flash memory device, be sure to read “Precautions when using the USB [TO DEVICE] terminal” on page 26. N1 Owner’s Manual • 23 Recording your Performance 3 4 Start recording. Recording starts as soon as you play the keyboard. Alternatively, press the [PLAY/STOP] button to start recording.  The [RECORD] button indicator and the [PLAY/STOP] button indicator light up. Stop recording. Press either the [RECORD] or [PLAY/STOP] button to stop recording.  Data writing will begin. When the recording is finished, the “End” appears on the display for three seconds. End NOTICE Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instrument is recording the data (while “- - -“ is displayed ). Otherwise, all recorded data, including the data being recorded, will be lost. 5 Play back the recorded performance. Press the [PLAY/STOP] button to start playback of the recorded performance. If the metronome was on when you started recording, you’ll be able to keep time with the metronome while recording, but the metronome sound will not be recorded. If the memory becomes full during recording, “FUL” will appear on the display and recording will stop automatically. (All recorded data up to that point will be retained.) If you wish to erase previously recorded data to the instrument, press the [PLAY/ STOP] button to start recording, then press it again to stop recording. Do not connect any USB device during this operation. The song data recorded to a USB flash memory device can be erased by using a computer. When you record to a USB flash memory device directly, if you select another song or disconnect the USB device after recording, the recorded performance cannot be played back by pressing the [PLAY/STOP] button. Refer to “Listening to songs in USB Flash Memory” on page 27 to play back the song. Playing Back the Song Recorded to the Instrument You can play back the song recorded to the instrument using the Record function (page 23). You can also play the keyboard along with the playback. Refer to page 27 to playback the song recorded to a USB flash memory device. 1 2, 3 1 Engage User Song mode. While holding down the [DEMO/SONG] button, press the [+] or [-] button until “USr” appears on the display. 2 Start playback. Press the [PLAY/STOP] button to start playback. 3 Stop playback. Press the [PLAY/STOP] button again to stop playback. 24 • N1 Owner’s Manual User song: Usr In this manual, the performance data recorded to this instrument is called a “User song”. Recording your Performance Saving Your Recorded Performance to USB Flash Memory The recorded user song data on this instrument can be saved to a USB flash memory device. Before using a USB flash memory device, be sure to read “Precautions when using the USB [TO DEVICE] terminal” on page 26. 1 2 1 Engage Saving mode. Make sure that a USB flash memory device is connected to the instrument, then while holding the [FUNCTION] button, press the [PLAY/STOP] button.  “Uxx” (xx is a number) appears on the display after “SAu.” If you wish to cancel saving, press any button other than [PLAY/STOP] button before you go on to the next step. 2 Save the data. Press the [PLAY/STOP] button.  Data writing will begin. When the saving is finished, “End” appears on the display for three seconds. End Songs recorded on this instrument are saved under the file names of “USERSONGxx.mid” (xx is a number 00–99) in the “USER FILES” folder. The number of available file containers is 100 (U00–U99). NOTICE Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instrument is saving the data to the USB device (while “- - -“ is displayed ). Otherwise, all data, including the data being saved, will be lost. N1 Owner’s Manual • 25 Recording your Performance Precautions when using the USB [TO DEVICE] terminal Using USB Storage Devices By connecting the instrument to a USB storage device, you can save data you’ve created to the connected device, as well as read data from the connected device. NOTE Although CD-R/RW drives can be used to read data to the instrument, they cannot be used for saving data. This instrument features a built-in USB [TO DEVICE] terminal for connection to USB storage devices. When connecting a USB device to the terminal, be sure to handle the USB device with care. Follow the important precautions below. NOTE For more information about the handling of USB devices, refer to the owner’s manual of the USB device.  Compatible USB devices • USB storage devices (flash memory, etc.) The instrument does not necessarily support all commercially available USB devices. Yamaha cannot guarantee operation of USB devices that you purchase. Before purchasing a USB device for use with this instrument, please visit the following web page: http://music.yamaha.com/download/ NOTE Other USB devices such as a computer keyboard or mouse cannot be used.  Connecting USB device • When connecting a USB device to the USB [TO DEVICE] terminal, make sure that the connector on the device is appropriate and that it is connected in the proper direction. • Though the instrument supports the USB 1.1 standard, you can connect and use a USB 2.0 storage device with the instrument. However, note that the transfer speed is that of USB 1.1. 26 • N1 Owner’s Manual  The number of USB storage device to be used Only one USB storage devices can be connected to the USB [TO DEVICE] terminal.  Formatting USB storage media When accessing a USB storage device or media, a message may appear prompting you to format the device/media. If so, execute the Format operation (page 29). NOTICE The format operation overwrites any previously existing data. Make sure that the media you are formatting does not contain important data.  To protect your data (write-protect) To prevent important data from being inadvertently erased, apply the write-protect provided with each storage device or media. If you are saving data to the USB storage device, make sure to disable write-protect.  Connecting/removing USB storage device Before removing the media from the device, make sure that the instrument is not accessing data (such as in the Save and Format operations). NOTICE Avoid frequently turning the power on/off to the USB storage device, or connecting/disconnecting the device too often. Doing so may result in the operation of the instrument “freezing” or hanging up. While the instrument is accessing data (such as during Save and Format operations) or is mounting the USB storage device (shortly after the connection), do NOT unplug the USB connector, do NOT remove the media from the device, and do NOT turn the power off to either device. Doing so may corrupt the data on either or both devices. Listening to songs in USB Flash Memory You can conveniently connect a USB flash memory device to the instrument and listen to songs recorded to that device (on a computer). You can also save your recorded performances on the instrument to the connected device and play those songs back as well. Before using a USB flash memory, be sure to read “Precautions when using the USB [TO DEVICE] terminal” on page 26. 1 2 3, 4 1 Engage the USB Song mode. Make sure that the USB flash memory device is connected to the instrument. Then press the [+] or [-] button while holding the [DEMO/SONG] button until the message “Uxx” or “Fxx” (xx is a number 00–99) appears on the display. The message “Fxx” is displayed when no “Uxx” songs exist. If the USB flash memory device is not connected or there is no USB songs, neither “Uxx” nor “Fxx” appears. USB song: Select a USB song. Press the [+] or [-] button to select the song you want to play. Certain songs may take more time than others to start playback. Keep in mind that this also affects the time between playback of successively played songs. U00 2 • U00–U99 ..... Select the number of the desired USB song, that of the performance which you’ve recorded and saved using this instrument (page 25) and play the song. • F00–F99 ..... Select the number of the desired USB song, that which you’ve saved by using a computer and play the song. • U.AL ................ Play all USB songs in sequence. • U.rd ................ Play all USB songs continuously in random order. 3 Start playback. Press the [PLAY/STOP] button to start playback. 4 Stop playback. Press the [PLAY/STOP] button to stop playback. Character Code In this manual, the performance data saved to a USB flash memory device is called a “USB song.” The display may not appear immediately, depending on the number of the folders in the USB flash memory. The playback voice can be changed. You can play the keyboard along with the USB song. The voice of the song played is assigned to the voice playing on the keyboard. While a USB song is playing, hold down the [METRONOME] button and press the [+] or [-] button to change the song tempo. If you are using the metronome (page 17) during USB song playback, press the [+] or [-] button to change the song tempo. You can also press keys to change the tempo. Default setting: International If the song cannot be loaded, you may need to change the character code setting.  International Files with western alphabetical names (including umlaut or diacritic marks) can be loaded (files with names in Japanese cannot be loaded). Turn the power on while holding the [FUNCTION] and [REVERB] buttons.  Japanese Files with western alphabetical names and Japanese names can be loaded; however, file names including umlauts or diacritic marks cannot be loaded. Turn the power on while holding the [FUNCTION] and [METRONOME] buttons. N1 Owner’s Manual • 27 Listening to songs in USB Flash Memory Selecting songs with the keyboard  Forward 1 song: Press the C#5 key while holding down the [DEMO/SONG] button.  Rewind 1 song: Press the B4 key while holding down the [DEMO/SONG] button.  Forward 10 songs: Press the D5 key while holding down the [DEMO/SONG] button.  Rewind 10 songs: Press the A#4 key while holding down the [DEMO/SONG] button.  Select the “Uxx” (xx is a number 00–99) song: Press the C5 key while holding down the [DEMO/SONG] button.  Play back all: Press the G5 key while holding down the [DEMO/SONG] button.  Play back randomly: “Uxx”: The smallest number among U00–U99 is selected. If there are no any “Uxx” songs, the smallest number among F00–F99 is selected. If a USB flash memory device is not connected or there are no USB songs, the “Usr” song is selected. Press the G#5 key while holding down the [DEMO/SONG] button. A#4 C#5 G#5 B4 C5 D5 G5 What is SMF (Standard MIDI File)? Data format This instrument can play back files of SMF Format 0 and Format 1 (Standard MIDI file). When playing songs copied to a USB flash memory device from a computer or other device, the songs must be stored either in the USB flash memory’s root directory or a first-level/second level folder in the root directory. Songs stored in these locations can be played as song data. Songs stored in third-level folders created inside a second-level folder cannot be played by this instrument. USB flash memory Song File Song Folder Song File Song Folder (Root) Can be played. Song File Song Folder Cannot be played. When copying song data from computer to USB flash memory, make sure to save it by using SMF Format 0 and Format 1. Keep in mind that songs recorded on other devices may use a variety of voices not available on this instrument and hence may sound different than the original songs. 28 • N1 Owner’s Manual The SMF (Standard MIDI File) format is one of the most common and widely compatible sequence formats used for storing sequence data. There are two variations: Format 0 and Format 1. A large number of MIDI devices are compatible with SMF Format 0, and most commercially available MIDI sequence data is provided in SMF Format 0. The user song is saved as SMF Format 0. Formatting USB Flash Memory Certain USB flash memory devices may require formatting before they can be used by this instrument. Before using a USB flash memory device, be sure to read “Precautions when using the USB [TO DEVICE] terminal” on page 26. NOTICE If you format a USB flash memory that already contains data, all of the data will be erased. Be careful not to erase important data when using the format function. 1 1 2 2 Engage the Format mode. After connecting the USB flash memory device to be formatted to the instrument, press the [RECORD] button while holding the [FUNCTION] button.  The message “For” (Format) appears on the display. For Start Formatting. After pressing the [PLAY/STOP] button, a “n Y” message appears on the display. Press the [+] button to execute the formatting operation. Press the [-] button to cancel formatting.  When the formatting is finished, “End” appears on the display for three seconds. NOTICE Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instrument is formatting the USB device (while “- - -“ is displayed ). Doing so may damage the data or the USB flash memory itself. 3 Exit from the Format mode. Press any one of the buttons. N1 Owner’s Manual • 29 Backing up Data and Initializing the Settings Backup data in internal memory The following data will be saved to internal memory of the instrument. The data is maintained even when the power is turned off. • • • • Metronome volume (page 18) Fine-tuning of the pitch (page 21) Character code (page 27) User song data recorded to the instrument (page 23) Initializing the data When you initialize the data, all data, excluding the character code setting and the User song, will be initialized and reset to the factory default settings. While holding down the [METRONOME] button and the [REVERB] button, turn on the power to the instrument.  While the instrument is initializing the data, “CLr” appears on the display. CLr NOTICE Do not turn off the power to this instrument while it is initializing the data in its internal memory (while “CLr” is displayed). 30 • N1 Owner’s Manual If this instrument somehow becomes disabled or malfunctions, turn off the power to the instrument, then perform the initialization procedure. Connections Connectors CAUTION Before connecting the instrument to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may result. q w e Front (keyboard side)   Rear Refer to the “Panel Controls and Terminals” on page 8 for information on the location of the connectors. q AUX IN [L/L+R] [R] jacks The stereo outputs from another instrument can be connected to these jacks, allowing the sound of an external instrument to be reproduced via the N1’s speakers. Refer to the diagram below and use audio cables to make the connections. Use only the AUX IN [L/L+R] jack for connection with a mono device. CAUTION When the instrument’s AUX IN jacks are connected to an external device, first turn on the power to the external device, then to the instrument. Reverse this order when you turn the power off. Instrument Tone Generator AUX IN AUX OUT phone plug (standard) phone plug (standard) audio cable AUX IN OUTPUT phone plug (standard) phone plug (standard) audio cable N1 Owner’s Manual • 31 Connections w AUX OUT [L/L+R] [R] jacks These jacks let you connect the instrument to external powered speaker systems, for playing in larger venues at higher volumes. Refer to the diagram below and use audio cables to make the connections. CAUTION When the instrument’s AUX OUT jacks are connected to an external audio system, first turn on the power to the instrument, then to the external audio system. Reverse this order when you turn the power off. Instrument Powered speaker AUX OUT AUX IN phone plug (standard) phone plug (standard) audio cable e MIDI [IN] [OUT] connectors Use MIDI cables to connect external MIDI devices to these connectors. Refer to “About MIDI” on page 33 for more information. 32 • N1 Owner’s Manual Use audio cables and adaptor plugs with no resistance. When the sound from the AUX OUT jacks is routed to the AUX IN jacks, the input sound will be output from the speaker of the instrument. The output sound may be excessively loud and may cause noise. Use only the AUX OUT [L/L+R] jacks for connection with a mono device. About MIDI MIDI (Musical Instrument Digital Interface) is a global format standard for performance data transmission and reception between electronic musical instruments. Connecting musical instruments that support MIDI via MIDI cables enables you to transfer performance and setting data between multiple musical instruments. Using MIDI, you can also achieve more advanced performances than using just a single musical instrument. Transmits MIDI data. Receives MIDI data. You need a dedicated MIDI cable (optional) to make a MIDI connection. Since the transmission or reception of MIDI data can vary depending on the type of MIDI device, each MIDI device can transmit or receive only data and commands that are compatible with other connected MIDI devices. Please check the “MIDI Implementation Chart” on the Data List to find out what MIDI data and commands your devices can transmit or receive. Refer to page 5 for the “Data List.” Voice demo and piano preset song data are not transmitted via MIDI. Connecting to a Computer Connecting this instrument to a computer using the MIDI connectors enables you to transfer MIDI data between the instrument and the computer. For example, performance data of this instrument can be sent to and saved on the computer. You must install a software application on the computer to be able to transfer MIDI data between this instrument and a computer. CAUTION When connecting the instrument to a computer, first turn off the power to both the instrument and the computer before connecting any cables. After making connections, turn on the power to the computer first, then to the instrument. MIDI [OUT] MIDI [IN] USB port Instrument Computer A USB-MIDI interface (such as a Yamaha UX16) Use an optional USB-MIDI interface (such as a Yamaha UX16) to connect this instrument’s MIDI connectors to the computer’s USB port. You also need to install the USB-MIDI driver on the computer correctly to use the interface. For more information, refer to the user’s manual that came with the USB interface device. N1 Owner’s Manual • 33 About MIDI Local Control On/Off “Local Control” refers to the fact that, normally, the keyboard of this instrument controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal tone generator is controlled locally by its own keyboard. Local control can be turned Off, however, so that the keyboard of this instrument does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. While holding down the [FUNCTION] button, press the C6 key. Pressing the C6 key repeatedly toggles between Local Control On and Off. C6 34 • N1 Owner’s Manual Appendix Message List Message Comment 0 0 1 Indicates failure in accessing the USB flash memory or media.  Disconnect the USB flash memory device or media and connect it again to the USB [TO DEVICE] terminal. If this message appears repeatedly, use another USB flash memory device or media. 0 0 2 Indicates that the song data cannot be loaded correctly. 0 0 4 Indicates that the song data is too large to be loaded. 0 0 5 The USB flash memory device or media has not been formatted.  Format the USB flash memory device or media after making sure on your computer that the USB flash memory or media you are formatting does not contain important data (page 29). 0 0 6 Indicates that the protected song data cannot be loaded. 0 0 7 There is no song data. 0 0 8 The USB flash memory device or media is not connected.  Connect a USB flash memory device or media to the USB [TO DEVICE] terminal. 0 1 4 Indicates failure in saving the file, because the same name folder exists in the USB flash memory device or media.  Change the folder name using your computer. 0 2 0 This USB device cannot be used.  Use only USB flash memory devices compatible with the instrument. 0 2 2 Displayed when the total amount of USB flash memory or USB hub has become too large.  Refer to “Using USB Storage Devices” on page 26. 0 2 3 Indicates failure in connecting the USB flash memory or media.  Disconnect the USB flash memory device or media and connect it again. 0 2 4 Communication with the USB device has been shut down because of the overcurrent to the USB device.  Disconnect the device from the USB [TO DEVICE] terminal, then turn on the power of the instrument. - - - Processing the current operation. C L r Initializing to the default settings. E 5 3 E 5 4 Indicates failure in setting the keyboard.  Please contact your nearest Yamaha dealer or authorized distributor. E n d Displayed when the current operation is completed. F U L Displayed when internal memory is full. Displayed when the total amount of files or folders has become too large. Displayed when the media is full. F o r Indicates that the instrument has engaged format mode for the USB storage device. Y Prompts you to confirm or cancel the formatting operation. o Indicates that the USB storage device or media is write-protected. n P r * When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes. * Press the [+] or [-] button to exit from these message displays. N1 Owner’s Manual • 35 Troubleshooting Problem Possible Cause and Solution The instrument does not turn on. The instrument has not been plugged in properly. Securely insert the female plug into the socket on the instrument, and the male plug into a proper AC outlet (page 9). Noise is heard from the speakers or headphones. The noise may be due to interference caused by the use of a mobile phone in close proximity to the instrument. Turn off the mobile phone, or use it further away from the instrument. A click or pop is heard when the power is turned on or off. Electrical current is being applied to the instrument. This is normal. The overall volume is low, or no sound is heard. • The Volume is set too low: set it to an appropriate level using the [MASTER VOLUME] control (page 10). • Make sure a pair of headphones is not connected to the headphones jack (page 11). • Make sure that Local Control (page 34) is on. The pitch and/or tone of the Piano Voices in certain ranges do not sound right. The Piano Voices attempt to precisely simulate actual piano sounds. However, as a result of sampling algorithms, overtones in some ranges may sound exaggerated, producing a somewhat different pitch or tone. This is normal, and no cause for concern. Sound is not heard on a particular key. Keyboard may not function normally if the key was pressed when the power was turned on. Turn off the power and turn it again to reset the function. Do not touch any keys when turning the power on (page 10). Sound input to the AUX IN jacks is interrupted. The output volume of the external device connected to this instrument is too low. Increase the output volume of the external device. The volume level reproduced via this instrument’s speakers can be adjusted by using the [MASTER VOLUME] control. The damper pedal has no effect. • The pedal cord may not be securely connected to the [PEDAL] jack. Be sure to insert the pedal cord all the way until the metal part of the cord plug disappears from view (page 38). • The damper pedal was pressed when the power was turned on. This is not a malfunction; press the pedal again to reset the function. The USB flash memory device has hung up (stopped). • Disconnect the device and connect it to the instrument again. • The USB flash memory is not compatible with the instrument. Only use the USB flash memory device whose compatibility has been confirmed by Yamaha (page 26). * The message list (page 35) is also provided for your reference. Maintenance When the surface of the instrument loses luster, wipe the instrument evenly with a cloth moistened with some special piano cleaner. For more information, contact the store where you purchased the instrument. 36 • N1 Owner’s Manual Assembling the Unit 1-4 Raise the speaker box. CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble the unit in the appropriate sequence. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws. Do not use any other screws. Inappropriate screws may cause damage or malfunction of the product. Be sure to insert screws of the proper size in the correct hole locations. • Be sure to tighten all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence. Do not hold here. Have a Phillips-head (+) screwdriver of the appropriate size ready. Remove all parts other than the main unit from the box. Confirm that all parts shown in the illustration are provided. Do not remove the main unit from the box prior to step 3. 2 Detach the speaker net. 2-2 Main Unit 2-1 Leg (L) Leg (R) Speaker box Be sure to lay the packaging sheet or other protective sheet on the floor and under the instrument. 2-1 Remove the two screws. These screws are used in step 6. 2-2 Detach the speaker net. 3 Mount the main unit. 6 × 30 mm long screws × 10 6 × 20 mm short screws × 6 AC power cord × 1 1 Attach the legs to the speaker box. 1-1 Attach the leg (L) to the side of the speaker box using three short screws (6 x 20 mm). 1-2 While pressing the bracket on the leg against the speaker box, securely tighten the screws that were attached. 1-3 Follow the same steps to attach the leg (R). 3-1 Mount the main unit on the speaker box while aligning the rear of the main unit with the rear of the speaker box, and each lateral side of the main unit with the lateral side of the legs. CAUTION Be careful not to pinch your fingers when mounting the main unit. Hold here. 1-1 1-2 N1 Owner’s Manual • 37 Assembling the Unit 3-2 Move the main unit slightly toward the rear side, then adjust its position so that the projecting pin on the metal brackets on the bottom of the main unit will lock into the notch on the metal brackets of the legs (L/R). 6 Attach the speaker net. 6-1 Attach the speaker net. 6-2 Affix the speaker net with the screws unloosed at step 2. 4 Secure the main unit. Secure the main unit using ten long screws (6 x 30 mm). 7 Insert the AC power cord plug into the AC INLET. For models that feature a voltage selector: Set the voltage selector to an appropriate voltage. 5 Connect the speaker cord and pedal cord. 220 240 110 5-2 127 5-3 5-1 5-4 8 Rotate the adjuster until it comes in firm contact with the floor surface. 5-1 5-4 5-1 Remove the vinyl tie attaching the speaker cord and pedal cord. 5-2 Insert the speaker cord plug into the connector so that the tab extends toward the front when viewed from the rear. 5-3 Insert the pedal cord plug into the pedal connector in the correct orientation. Connecting the pedal cord Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. 5-4 Use vinyl ties to bundle the speaker cord and pedal cord. 38 • N1 Owner’s Manual  After completing the assembly, please check the following. • Are there any parts left over?  Review the assembly procedure and correct any errors. • Is the instrument clear of doors and other movable fixtures?  Move the instrument to an appropriate location. • Does the instrument make a rattling noise when you shake it?  Tighten all screws. • Is the power cord inserted securely into the sockets?  Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. Specifications Size/Weight Dimensions Width 1,465mm (57-11/16") Height 995mm (39-3/16") With music rest: 1,170mm (46-1/16") Depth Weight Keyboard Control Interface Sensor System Number of Keys 88 (A-1–C7) White Acrylic resin Black Cabinet Fixed/Soft/Medium/Hard Hammer Sensors Non-contact optical fiber Key Sensors Non-contact optical fiber Yes Functions Damper (with half-pedal effect), Sostenuto, Soft Yes Music Rest Yes Tone Generation Technology Voices Effects Songs Yes Key-off Samples Yes String Resonance Yes Polyphony Number of Polyphony (Max.) 256 Preset Number of Voices Types Reverb Preset Number of Songs 10 preset songs, 5 voice demo songs Number of Songs 1 song (300KB; approx. 30,000 notes) Number of Tracks 1 Recording Overall Controls Yes Yes MIDI Headphones Accessories Yes 7 types IN/OUT PHONES x 2 AUX IN [L/L+R] [R] AUX OUT [L/L+R] [R] USB TO DEVICE Amplifiers and Speakers Yes Transpose Scale Type Connectors 5 Yes Tempo Tuning Connectivity Spatial Acoustic Sampling Stereo Sustain Samples Metronome Functions 3 Half Pedal Fallboard Tone Generation Phoenolic resin Touch Sensitivity Number of Pedals Pedal 618mm (24-5/16") 124kg (273lbs., 6oz) Amplifiers Yes 25W x 1 + 30W x 5 Speakers 8cm x 3 + 13cm x 2 + 16cm x 1 Owner’s Manual, AC Power Cord, Felt Key Cover, Bench (included or optional depending on locale), My Yamaha Product User Registration Included Accessories * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. Optional Accessories Headphones HPE-160 USB-MIDI Interface UX16 N1 Owner’s Manual • 39 Index A P AC IN ....................................................................................... 9 Accessories.............................................................................. 5 Assembly ............................................................................... 37 AUX IN ................................................................................. 31 AUX OUT ............................................................................. 32 Pedals ......................................................................................11 PHONES ................................................................................11 PIANO/VOICE .....................................................................15 Pitch ........................................................................................21 PLAY/STOP.......................................................13, 16, 24, 27 Playback Demo Song ....................................................................16 Preset Song ....................................................................13 USB song .......................................................................27 User song .......................................................................24 Power ......................................................................................10 Precautions...............................................................................6 Preset Song ............................................................................13 B Backup ................................................................................... 30 Base Note .............................................................................. 22 C Character Code ..................................................................... 27 Connectors............................................................................. 31 D Data format ........................................................................... 28 Data List .................................................................................. 5 Demo Song ............................................................................ 16 DEMO/SONG ................................................... 13, 16, 24, 27 Display ..................................................................................... 8 F Fallboard .................................................................................. 9 Formatting ............................................................................. 29 FUNCTION ....................................................... 20, 21, 22, 34 H Q Quick Operation Guide .......................................................43 R Recording ...............................................................................23 Reverb.....................................................................................19 S Saving .....................................................................................25 Scale ........................................................................................22 Specifications ........................................................................39 T Initializing ............................................................................. 30 Tempo .....................................................................................17 Time signature ......................................................................18 Touch Sensitivity ..................................................................19 Transposition .........................................................................20 Troubleshooting ....................................................................36 Tuning.....................................................................................22 K U Key cover -> Fallboard ......................................................... 9 USB Song ..............................................................................27 USB storage device ..............................................................26 USB TO DEVICE ................................................................26 User song ...............................................................................24 Headphone............................................................................. 11 I L Local Control ........................................................................ 34 M MASTER VOLUME .......................................................... 10 Message List ......................................................................... 35 METRONOME .................................................................... 17 Metronome ............................................................................ 17 MIDI ....................................................................................... 33 Music rest .............................................................................. 12 40 • N1 Owner’s Manual V Voice .......................................................................................15 Voice Demo ...........................................................................16 Volume Master Volume .............................................................10 Metronome Volume .....................................................18 Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. (weee_eu) N1 Owner’s Manual • 41 FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. 42 • N1 Owner’s Manual devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. (class B) Quick Operation Guide / Übersicht über die Kurzbefehle While holding down the button on the control panel, press one of the corresponding keys shown below to select songs, or set parameters. z x c v b n m , Voice Demo Playback Preset Song Playback Preset Song Playback: all Preset Song Playback: random User Song Playback USB Song Playback USB Song Playback: all USB Song Playback: random z P02 P04 d01 d03 d05 . 4 3 7 5 6 9 8 11 P07 P09 P.AL -10 Usr (S.14) (S.24) (S.27) (S.27) , USB-Song-Wiedergabe: zufällige Reihenfolge . Metronomlautstärke ⁄0 Metronom-Taktart ⁄1 Metronom-/Song-Tempo ⁄2 Transponierung ⁄3 Grundton ⁄4 Skala ⁄5 Lokalsteuerung ein/aus ⁄6 Anschlagempfindlichkeit (S.27) (S.18) (S.18) (S.17) (S.20) (S.22) (S.22) (S.34) (S.19) m, U.rd -1 U00 +10 U.AL ⁄1 2/4 4/4 10 12 13 15 17 18 20 (S.14) +1 ⁄0 19 (S.16) (S.14) n P.rd MAX 14 16 z Voice-Demo-Wiedergabe x Preset-Song-Wiedergabe c Preset-Song-Wiedergabe: alle nacheinander v Preset-Song-Wiedergabe: zufällige Reihenfolge b User-Song-Wiedergabe n USB-Song-Wiedergabe m USB-Song-Wiedergabe: alle nacheinander (p.18) (p.18) (p.17) (p.20) (p.22) (p.22) (p.34) (p.19) cv b P01 P03 P05 P06 P08 P10 MIN 1 Metronome Volume Metronome Time Signature Metronome/Song Tempo Transpose Base Note Scale Local Control on/off Touch Sensitivity x d02 d04 2 . ⁄0 ⁄1 ⁄2 ⁄3 ⁄4 ⁄5 ⁄6 (p.16) (p.14) (p.14) (p.14) (p.24) (p.27) (p.27) (p.27) Um Songs auszuwählen oder Parameter einzustellen, halten Sie die Bedienfeldtaste gedrückt und schlagen Sie gleichzeitig eine der betreffenden nachstehend gezeigten Tastaturtasten an. -10 0 3/4 5/4 6/4 -1 +1 +10 ⁄6 N1 Owner’s Manual • 43 ⁄2 -6 -4 -5 -2 -3 ⁄3 +1 +3 -1 0 +6 +2 +4 +5 C# D# C D ⁄4 ⁄5 F# G# A# E F G A 1 B 0 2 3 Guide de fonctionnement rapide / Guía de funcionamiento rápida Tout en maintenant les touches du panneau de commande enfoncées, appuyez sur l'une des touches ci-dessous pour sélectionner un morceau ou régler un paramètre. (p. 14) (p. 14) (p. 14) (p. 24) (p. 27) x d02 d04 P02 P04 d01 d03 d05 1 . 4 3 7 5 cv b P07 P09 6 9 8 11 P.AL 14 16 -10 Usr 10 12 13 15 17 18 20 (pág.14) (pág.14) (pág.24) (pág.27) , Reproducción de canción USB: aleatoria (pág.27) . Volumen del metrónomo (pág.18) ⁄0 Compás del metrónomo (pág.18) ⁄1 Tempo de metrónomo/canción (pág.17) ⁄2 Transposición (pág.20) ⁄3 Nota base (pág.22) ⁄4 Escala (pág.22) ⁄5 Activación/desactivación de Local Control (pág.34) ⁄6 Sensibilidad a la pulsación (pág.19) (pág.27) m, U.rd -1 U00 +10 U.AL ⁄1 2/4 4/4 19 (pág.14) +1 ⁄0 MAX (pág.16) n P.rd P01 P03 P05 P06 P08 P10 MIN z Reproducción de demostración de voz x Reproducción de canción predefinida c Reproducción de canción predefinida: todas v Reproducción de canción predefinida: aleatoria b Reproducción de canción del usuario n Reproducción de canción USB m Reproducción de canción USB: todas (p. 27) z 2 , Reproduction de morceaux USB : aléatoire (p. 27) . Volume du métronome (p. 18) ⁄0 Type de mesure du métronome (p. 18) ⁄1 Tempo du métronome/morceau (p. 17) ⁄2 Transposition (p. 20) ⁄3 Note fondamentale (p. 22) ⁄4 Gamme (p. 22) ⁄5 Activation/désactivation de la commande locale (p. 34) ⁄6 Sensibilité au toucher (p. 19) (p. 16) -10 0 3/4 5/4 6/4 -1 +1 +10 ⁄6 ⁄2 -6 -4 -5 -2 -3 ⁄3 +1 +3 -1 0 +6 +2 +4 +5 C# D# C D ⁄4 ⁄5 F# G# A# E F G A 1 B 0 2 3 44 • N1 Owner’s Manual z Reproduction de voix de démonstration x Reproduction de morceaux présélectionnés c Reproduction de morceaux présélectionnés : tous v Reproduction de morceaux présélectionnés : aléatoire b Reproduction de morceaux utilisateur n Reproduction de morceaux USB m Reproduction de morceaux USB : tous Pulse el botón del panel de control y, sin soltarlo, pulse cualquiera de las teclas correspondientes indicadas a continuación para seleccionar canciones o configurar parámetros. For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S.A. de C.V. Calz. Javier Rojo Gómez #1149, Col. Guadalupe del Moral C.P. 09300, México, D.F., México Tel: 55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi, CEP 04534-013 Sao Paulo, SP. BRAZIL Tel: 011-3704-1377 ARGENTINA Yamaha Music Latin America, S.A. Sucursal de Argentina Olga Cossettini 1553, Piso 4 Norte Madero Este-C1107CEK Buenos Aires, Argentina Tel: 011-4119-7000 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Europe Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040 FRANCE Yamaha Music Europe 7 rue Ambroise Croizat, Zone d'activités Pariest, 77183 Croissy-Beaubourg, France Tel: 01-64-61-4000 ITALY Yamaha Music Europe GmbH, Branch Italy Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 SPAIN/PORTUGAL Yamaha Music Europe GmbH Ibérica, Sucursal en España Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 SWEDEN Yamaha Music Europe GmbH Germany filial Scandinavia J. A. Wettergrens Gata 1, Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 DENMARK Yamaha Music Europe GmbH, Tyskland – filial Denmark Generatorvej 6A, DK-2730 Herlev, Denmark Tel: 44 92 49 00 FINLAND EUROPE NORWAY Yamaha Music Europe GmbH (UK) Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700 GERMANY Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 SWITZERLAND/LIECHTENSTEIN Yamaha Music Europe GmbH Branch Switzerland in Zürich Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 044-387-8080 AUSTRIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 CZECH REPUBLIC/HUNGARY/ ROMANIA/SLOVAKIA/SLOVENIA Yamaha Music Europe GmbH Branch Austria (Central Eastern Europe Office) Schleiergasse 20, A-1100 Wien, Austria Tel: 01-602039025 POLAND/LITHUANIA/LATVIA/ESTONIA Yamaha Music Europe GmbH Branch Sp.z o.o. Oddzial w Polsce ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland Tel: 022-500-2925 BULGARIA Dinacord Bulgaria LTD. Bul.Iskarsko Schose 7 Targowski Zentar Ewropa 1528 Sofia, Bulgaria Tel: 02-978-20-25 MARTA Olimpus Music Ltd. The Emporium, Level 3, St. Louis Street Msida MSD06 Tel: 02133-2144 DMI1 Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. THE NETHERLANDS/ BELGIUM/LUXEMBOURG Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanización Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, Panamá Tel: +507-269-5311 THE UNITED KINGDOM/IRELAND Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511 Yamaha Music Europe GmbH Germany Norwegian Branch Grini Næringspark 1, N-1345 Østerås, Norway Tel: 67 16 77 70 ICELAND Skifan HF Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland Tel: 525 5000 RUSSIA Yamaha Music (Russia) Room 37, bld. 7, Kievskaya street, Moscow, 121059, Russia Tel: 495 626 5005 OTHER EUROPEAN COUNTRIES Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 ASIA THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 HONG KONG Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 INDIA Yamaha Music India Pvt. Ltd. 5F Ambience Corporate Tower Ambience Mall Complex Ambience Island, NH-8, Gurgaon-122001, Haryana, India Tel: 0124-466-5551 INDONESIA PT. Yamaha Musik Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 021-520-2577 KOREA Yamaha Music Korea Ltd. 8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 02-3467-3300 MALAYSIA Yamaha Music (Malaysia) Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 03-78030900 PHILIPPINES Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 SINGAPORE Yamaha Music (Asia) Pte., Ltd. #03-11 A-Z Building 140 Paya Lebor Road, Singapore 409015 Tel: 6747-4374 TAIWAN Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688 THAILAND Siam Music Yamaha Co., Ltd. 4, 6, 15 and 16th floor, Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: 02-215-2622 OTHER ASIAN COUNTRIES Yamaha Corporation, Asia-Pacific Sales & Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2313 AFRICA Yamaha Corporation, Asia-Pacific Sales & Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2313 MIDDLE EAST TURKEY/CYPRUS Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 OTHER COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jubel Ali, Dubai, United Arab Emirates Tel: +971-4-881-5868 OCEANIA AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 NEW ZEALAND Music Works LTD P.O.BOX 6246 Wellesley, Auckland 4680, New Zealand Tel: 9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation, Asia-Pacific Sales & Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2313 AvantGrand Special Site http://www.avant-grand.com/ Yamaha Home Keyboards Home Page http://music.yamaha.com/homekeyboard/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Digital Musical Instruments Division © 2010 Yamaha Corporation 109POAPx.x-xxC0 Printed in China WV41250