Yamaha NU1 El manual del propietario

Marca: Yamaha

Modelo: NU1

Categoría: Teclados

Tipo: El manual del propietario

ENGLISHDEUTSCH

FRANÇAIS

ESPAÑOL

Owner’s Manual

Bedienungsanleitung

Mode d'emploi

Manual de instrucciones

NU1

Hybrid Piano

Before using this instrument, be sure to read

“PRECAUTIONS” on pages 6 – 7.

Achten Sie darauf, vor Einsatz dieses Instruments die

„VORSICHTSMASSNAHMEN“ auf Seiten 6-7 durchzulesen.

Avant d'utiliser cet instrument, lisez attentivement la section

« PRÉCAUTIONS D'USAGE » aux pages 6-7.

Antes de utilizar el instrumento, lea la sección

“PRECAUCIONES”, en las páginas 6-7.

2 NU1 Owner’s Manual

PRODUCT SAFETY MARKINGS: Yamaha electronic

products may have either labels similar to the graphics

shown below or molded/stamped facsimiles of these

graphics on the enclosure. The explanation of these graph-

ics appears on this page. Please observe all cautions indi-

cated on this page and those indicated in the safety

instruction section.

See bottom of Keyboard enclosure for graphic symbol

markings.

The exclamation point within the equi-

lateral triangle is intended to alert the

user to the presence of important operat-

ing and maintenance (servicing) instruc-

tions in the literature accompanying the

product.

The lightning flash with arrowhead

symbol, within the equilateral triangle,

is intended to alert the user to the pres-

ence of uninsulated “dangerous volt-

age” within the product’s enclosure that

may be of sufficient magnitude to con-

stitute a risk of electrical shock.

IMPORTANT NOTICE: All Yamaha electronic products

are tested and approved by an independent safety testing

laboratory in order that you may be sure that when it is

properly installed and used in its normal and customary

manner, all foreseeable risks have been eliminated. DO

NOT modify this unit or commission others to do so unless

specifically authorized by Yamaha. Product performance

and/or safety standards may be diminished. Claims filed

under the expressed warranty may be denied if the unit is/

has been modified. Implied warranties may also be

affected.

SPECIFICATIONS SUBJECT TO CHANGE: The

information contained in this manual is believed to be cor-

rect at the time of printing. However, Yamaha reserves the

right to change or modify any of the specifications without

notice or obligation to update existing units.

ENVIRONMENTAL ISSUES: Yamaha strives to pro-

duce products that are both user safe and environmentally

friendly. We sincerely believe that our products and the

production methods used to produce them, meet these

goals. In keeping with both the letter and the spirit of the

law, we want you to be aware of the following:

Battery Notice: This product MAY contain a small non-

rechargeable battery which (if applicable) is soldered in

place. The average life span of this type of battery is

approximately five years. When replacement becomes nec-

essary, contact a qualified service representative to per-

form the replacement.

Warning: Do not attempt to recharge, disassemble, or

incinerate this type of battery. Keep all batteries away from

children. Dispose of used batteries promptly and as regu-

lated by applicable laws. Note: In some areas, the servicer

is required by law to return the defective parts. However,

you do have the option of having the servicer dispose of

these parts for you.

Disposal Notice: Should this product become damaged

beyond repair, or for some reason its useful life is consid-

ered to be at an end, please observe all local, state, and fed-

eral regulations that relate to the disposal of products that

contain lead, batteries, plastics, etc.

NOTICE: Service charges incurred due to lack of knowl-

edge relating to how a function or effect works (when the

unit is operating as designed) are not covered by the manu-

facturer’s warranty, and are therefore the owners responsi-

bility. Please study this manual carefully and consult your

dealer before requesting service.

NAME PLATE LOCATION: The graphic below indi-

cates the location of the name plate. The model number,

serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number,

and the date of purchase in the spaces provided below and

retain this manual as a permanent record of your purchase.

Model

Serial No.

Purchase Date

92-469-

q (bottom)

SPECIAL MESSAGE SECTION

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

NU1 Owner’s Manual 3

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radia-

tors, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience recepta-

cles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart,

stand, tripod, bracket, or

table specified by the man-

ufacturer, or sold with the

apparatus. When a cart is

used, use caution when

moving the cart/apparatus

combination to avoid injury

from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

(UL60065_03)

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifica-

tions not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could

void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these requirements

provides a reasonable level of assurance that your use of this

product in a residential environment will not result in harmful

interference with other electronic devices. This equipment

generates/uses radio frequencies and, if not installed and

used according to the instructions found in the users manual,

may cause interference harmful to the operation of other elec-

tronic devices. Compliance with FCC regulations does not

guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which

can be determined by turning the unit “OFF” and “ON”, please

try to eliminate the problem by using one of the following mea-

sures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distrib-

ute this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America, Elec-

tronic Service Division, 6600 Orangethorpe Ave, Buena Park,

CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park,

Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Hybrid Piano

Model Name : NU1

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

4 NU1 Owner’s Manual

Thank you for choosing the Yamaha Hybrid Piano.

In order to make the most of the performance potential and features of the instrument,

please read the manuals thoroughly,

and keep them in a handy place for later reference.

This instrument, which combines the priceless value of an acoustic piano and versatile digital tech-

nology that provides exceptional flexibility to performers, is a true hybrid piano.

Main Features

Authentic acoustic piano touch with special upright piano action

Featuring a specially designed mechanism in which the keyboard action and the hammer workings real-

istically reproduce those of an acoustic piano, this instrument provides a realistic touch response that is

extraordinarily similar to an upright piano.

CFX Sampling technology

Sophisticated sampling using the latest technology was used to capture the luxurious sounds of

Yamaha’s flagship CFX, a full-sized concert grand piano. The powerful bass and bright, penetrating

midrange sound of the original CFX are reproduced faithfully, and give a particularly natural and well-

balanced overall piano sound.

Best Condition without Tuning

Unlike acoustic pianos, this instrument does not need to be tuned. It always stays perfectly in tune even

after long-time use.

Flexible Volume Control

This instrument gives you full control over the instrument volume, letting you adjust the level just as

desired. Also, you can play or listen in total privacy through one or two pairs of headphones.

Audio Playing and Recording from a USB Flash Memory

Audio files (.wav) saved to a USB flash memory can be played back on the instrument. Moreover, since

you can record your performance as audio data to a USB flash memory device, it is possible to listen to

your performance on portable music players, with the data transferred by computer.

NU1 Owner’s Manual 5

Getting started playing your new Hybrid Piano

Table of Contents

Online Materials

In addition to this manual, the following instructional materials are available.

MIDI Reference

This contains the MIDI Data Format, the MIDI Implementation chart and detailed explanations about the MIDI settings of

the instrument.

MIDI Basics (only in English, French, German and Spanish)

If you want to know more about MIDI and how to use it, refer to this introductory book.

Computer-related Operations

Includes instructions on connecting this instrument to a computer, and operations related to transferring song data.

To obtain these manuals, access the Yamaha Manual Library, enter “NU1” or “MIDI Basics” to the Model Name box, then click

[SEARCH].

Yamaha Manual Library

http://www.yamaha.co.jp/manual/

This section explains how to make detailed settings for the

instrument’s various functions.

This section includes a list of display messages, Quick

Operation Guide and other information.

* This is a quick reference for operation of the functions assigned to the buttons

and keyboard.

PRECAUTIONS ....................................................... 6

Introduction

Panel Controls and Terminals .................................... 8

Playing the Keyboard .................................................. 9

Using the Pedals .....................................................11

Using Headphones (Optional).................................12

I.A. Control (Intelligent Acoustic Control).................12

Advanced Functions

Basic Operations and More ...................................... 13

Selecting a Voice.....................................................13

Listening to the Voice Demo Songs ........................13

Using the Metronome ..............................................14

Changing the Touch Sensitivity...............................15

Adding Variations to the Sound (Reverb)................15

Transposing the Pitch in semitones ........................16

Fine tuning the Pitch................................................16

Setting the Scale Tuning .........................................17

Playing Back Songs .................................................. 18

Songs compatible with this instrument ....................18

Playing back Songs.................................................19

Recording Your Performance ................................... 21

Using USB Flash Memory ......................................... 23

Connecting USB flash memory ...............................23

Formatting USB flash memory ................................24

Copying User Songs in the instrument to a USB

flash memory...........................................................24

Deleting a Song file .................................................25

Backup data and Initializing ..................................... 26

Backup data in internal memory..............................26

Initializing the Backup data......................................26

Connections ............................................................... 27

About MIDI .................................................................. 29

Example for MIDI connection.................................. 29

Local Control on/off.................................................29

Appendix

Message List .............................................................. 30

Troubleshooting......................................................... 31

Maintenance ............................................................... 32

Specifications.............................................................33

Index............................................................................ 34

Quick Operation Guide * ...........................................35

Accessories

Owner’s Manual

“50 greats for the Piano” (Music Book)

AC Power Cord

Felt Key Cover

Felt Strips x 3

Bench*

My Yamaha Product User Registration**

* Included or optional depending on locale.

** The PRODUCT ID on the sheet will be needed when you fill out

the User Registration form

6 NU1 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-

circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on

it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use only the supplied power cord/plug.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet conditions,

place on it any containers (such as vases, bottles or glasses) containing liquids

which might spill into any openings. If any liquid such as water seeps into the

instrument, turn off the power immediately and unplug the power cord from the AC

outlet. Then have the instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. Then have the device inspected

by Yamaha service personnel.

• The power cord or plug becomes frayed or damaged.

• It emits unusual smells or smoke.

• Some object has been dropped into the instrument.

• There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector. Doing

so can result in lower sound quality, or possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet, always hold the

plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Read carefully the attached documentation explaining the assembly process.

Failure to assemble the instrument in the proper sequence might result in damage

to the instrument or even injury.

• Do not place the instrument in an unstable position where it might accidentally fall over.

• When transporting or moving the instrument, always use two or more people.

Attempting to lift the instrument by yourself may damage your back, result in

other injury, or cause damage to the instrument itself.

• Before moving the instrument, remove all connected cables, to prevent damage to

the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power cord

from the wall AC outlet.

• Though the wooden parts of this instrument have been designed and produced

with care concerning the environment and human health, in some rare instances

customers may sense an unusual odor or develop irritation in the eyes, due to the

coating material and adhesive.

To avoid this, we recommend that you observe the following:

1. Specially ventilate the room for several days after unpacking and installing this

instrument, since it has been packed in airtight conditions in order to maintain

quality during transportation.

2. If the room housing the instrument is small, continue to ventilate it normally,

either daily or periodically.

3. If you have left the instrument in a closed room for a long time under high

temperature, ventilate the room, then lower the temperature if possible, before

using the instrument.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the desired

listening level.

• Do not insert a finger or hand in any gaps on the fallboard or instrument. Also

take care that the fallboard does not pinch your finger.

• Never insert or drop paper, metallic, or other objects into the gaps on the

fallboard, panel or keyboard. This could cause physical injury to you or others,

damage to the instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing loss.

If you experience any hearing loss or ringing in the ears, consult a physician.

• Do not place the bench in an unstable position where it might accidentally fall over.

• Do not play carelessly with or stand on the bench. Using it as a tool or stepladder

or for any other purpose might result in accident or injury.

• Only one person should sit on the bench at a time, in order to prevent the

possibility of accident or injury.

• If the bench screws become loose due to extensive long-term use, tighten them

periodically using the included tool.

• Keep special watch over any small children so that they don’t fall off the rear of the

bench. Since the bench does not have a backrest, unsupervised use may result in

accident or injury.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/Power cord

Assembly

Location

Connections

Handling caution

Using the bench (If included)

DMI-5 1/2

NU1 Owner’s Manual 7

Always turn the power off when the instrument is not in use.

NOTICE

To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)

to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° –

40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• Bumping the surface of the instrument with metal, porcelain, or other hard objects can cause the finish to crack or peel. Use caution.

• Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch the instrument's finish.

• During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the

wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth.

 Saving data

• To protect against data loss through media damage, we recommend that you save your important data onto two USB flash memories.

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal

use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use

others' copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and

sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.

 About this manual

• The illustrations and displays as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your

instrument.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

Transporting / Installing

If you move to another location, transport the instrument

horizontally. Do not subject the instrument to excessive

vibration or shock.

CAUTION

When moving the instrument, always hold the bottom of

the keyboard unit and the handgrips of the rear side. Be

sure not to hold the headphone jack box. Improper han-

dling can result in damage to the instrument or personal

injury.

Place the instrument away from the wall by at least 10

cm to optimize and enhance the sound effect. If you find

the instrument shaky or unstable after installing, insert

the included felt strips. For details, refer to the

instructions supplied with the felt strips.

Do not hold here.

Do not

hold here.

Rear handgrip

Rear

handgrip

DMI-5 2/2

8 NU1 Owner’s Manual

Panel Controls and Terminals

Overview

Control Panel

q Display ................................................................See below.

w [DEMO/SONG] button............................................. page 13

e [REVERB] button .................................................... page 15

r [METRONOME] button ........................................... page 14

t [PIANO/VOICE] button............................................ page 13

y [FUNCTION] button .............................pages 16, 17 and 29

u [RECORD] button ................................................... page 22

i [+]/[-] button

o [PLAY/STOP] button...................................pages 19 and 22

Display

Indicates various values such as Song number and Parameter value. Note that the display turns dark after the value is

set.

This display also indicates various messages with the three characters. For details, refer to page 30.

Music Rest (pages 9 and 10)

Fallboard

(pages 9 and 10)

Rear surface

[AC IN] jack

(page 9)

Power switch

(page 10)

Pedals (page 11)

Control panel

(see below)

Front surface

Te rm in al s

(page 27)

[MASTER VOLUME]

control (page 10)

[USB TO DEVICE]

terminal (page 23)

[PHONES] jacks

(page 12)

Adjuster

(should be rotated until it comes in

firm contact with the floor surface)

d.01

Song number

Parameter value

Introduction

NU1 Owner’s Manual 9

Playing the Keyboard

1 Set up the power supply.

1-1 On the bottom surface (page 8), insert the power cord plug into the [AC IN] connector.

WARNING

Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used. (The voltage

rating appears on the name plate on the bottom panel). Connecting the unit to an inappropriate AC supply can

seriously damage the internal circuitry and may even pose a shock hazard!

1-2 Insert the plug on the other end of the power cord to a standard AC outlet.

WARNING

• Use only the AC power cord supplied with the instrument. If the supplied

power cord is lost or damaged and needs to be replaced, contact your Yamaha

dealer. The use of an inappropriate replacement can pose a fire and shock haz-

ard!

• The type of AC power cord provided with the instrument may be different

depending on the country in which the instrument was purchased. (In some

areas a plug adaptor may be provided to match the pin configuration of the AC

wall outlets in your area.) Do NOT modify the plug provided with the instru-

ment. If the plug does not fit the outlet, have a proper outlet installed by a qual-

ified electrician.

2 With both hands, hold the hand grip, then lift and

open the fallboard.

CAUTION

• Hold the fallboard with both hands when opening or closing it. Do not

release it until it is fully opened or closed. Be careful to avoid catching

fingers (yours or others, especially children’s) between the fallboard

and the unit.

3 Fold down the top of the fallboard, then open the

music rest and put the score on it.

AC IN

AC IN connector

The shape of the plug differs

depending on your locale.

CAUTION

Be careful to avoid catch-

ing your fingers between

the fallboard and the

instrument.

Playing the Keyboard

10 NU1 Owner’s Manual

4 On the right of the keyboard, press the [ ] switch to turn on the power.

The lamp located as shown below lights up, the display (page 8) indicates “

nU1

” for a while, then the instru-

ment starts up.

NOTICE

Do not press any keys until the instrument has completely started up (approx. four seconds after turning on the switch).

Doing so may cause some keys to not sound normally.

5 Play the keyboard.

To adjust the volume:

Use the [MASTER VOLUME] control (page 8) located at the front left, just below the keyboard.

CAUTION

Avoid using this instrument at a high volume level for a long period of time, to prevent hearing damage.

6 Press the [ ] switch again to turn off the power.

The power lamp turns off.

CAUTION

A small amount of electrical current remains even after the power switch is turned off. If you plan not to use the instrument

for a long period of time, be sure to unplug the instrument from the AC outlet.

7 Close the music rest.

If you omit this operation and close the fallboard, the music

rest will hit the keyboard and may result in damage.

8 With both hands, open the folded top of the

fallboard, and close it gently.

MAXMIN

MASTER VOLUME

Power switch

The lamp lights up.

MAX

USB TO

MIN

MASTER VOLUME

The level increases. The level decreases.

CAUTION

Be careful to avoid catching your fingers

between the fallboard and the instrument.

Playing the Keyboard

NU1 Owner’s Manual 11

The instrument has three pedals that produce a range of expressive effects similar to those produced by the pedals on

an acoustic piano.

Damper Pedal (Right)

Pressing this pedal will sustain notes longer. Releasing this pedal immediately stops

(damps) any sustained notes. A “half-pedal” function of this pedal creates partial sus-

tain effects, depending on how far down you press the pedal.

 Half-pedal function

This function allows the sustain length to vary depending on how far the pedal is

pressed. The farther you press the pedal, the more the sound sustains. For example, if

you press the damper pedal and all notes you are playing sound a bit murky and loud

with too much sustain, you can release the pedal half way to subdue the sustain (murk-

iness).

 To set the Half Pedal Point:

While holding down [PIANO/VOICE], press one of the A#5–E6 keys. This operation

sets the degree to which pressing the damper pedal applies the half-pedal effect. The

smaller the value, the shallower the half-pedal point. The larger the value, the deeper

the half-pedal point.

Setting range: -2 (A#5) – 0 (C6) – 4 (E6)

Default Setting: 0

Sostenuto Pedal (Center)

Pressing this pedal while holding the notes will sustain the pressed notes (as if the

damper pedal had been pressed), but all subsequently played notes will not be sus-

tained. This makes it possible to sustain a chord, for example, while the other notes are

played “staccato.”

Soft Pedal (Left)

Pressing this pedal will reduce the volume and slightly change the timbre of the notes.

The notes played before this pedal is pressed are not affected.

Using the Pedals

GP Responsive Damper Pedal

This special pedal has been designed to provide enhanced tactile response and, when

pressed, is much closer in feel to the pedal of an actual grand piano. It makes it easier

to physically experience the half-pedal point and more easily apply the half-pedal

effect than other pedals.

If you press and hold the

damper pedal here, all the

notes shown will be sus-

tained.

A#5

If you press and hold the soste-

nuto pedal here, only the notes

held at this timing will be sus-

tained.

Playing the Keyboard

12 NU1 Owner’s Manual

Since this instrument is equipped with two [PHONES]

jacks, you can connect two sets of standard stereo head-

phones. If you are using only one set of headphones,

insert a plug into either jack, shutting off the speakers.

CAUTION

Avoid listening to the instrument at a high volume level

through headphones for a long period of time, to prevent

hearing damage.

This function automatically adjusts and controls the sound quality according to the overall volume of the instrument.

Even when the volume is low, it permits both low sounds and high sounds to be clearly heard. Note that the I.A. Con-

trol is effective only from the sound output of the instrument speakers.

 To turn on/off the I.A. Control:

While holding down [FUNCTION], press the C0 key repeatedly (as necessary).

Default setting: On

 To adjust the I.A. Control Depth:

While holding down [FUNCTION], press one of the keys between A0–D#1.

Setting range: -3 (A0) – 0 (C1) – 3 (D#1)

Default setting: 0 (C1)

The higher the value, the more clearly that low and high sounds are heard at lower volume levels.

Using Headphones (Optional)

I.A. Control (Intelligent Acoustic Control)

MAX

PHONES USB TO DEVICE

MIN

MASTER VOLUME

Standard stereo phone

plug

C0 C1

(0)

(-3)

D#1 (3)

NU1 Owner’s Manual 13

Basic Operations and More

Selecting a Voice

 To select the Grand Piano 1 Voice:

Simply press [PIANO/VOICE].

 To select a different Voice:

While holding down [PIANO/VOICE], press [+] or [-].

Voice Li st

Listening to the Voice Demo Songs

Demo Songs effectively demonstrate each of this instrument’s Voices.

1 Select the Voice for the Demo Song that you want to listen to.

2 Press [DEMO/SONG].

The Demo Song for the Voice selected in Step 1 starts.

To change the Demo Song during playback:

Press [+] or [-].

To adjust the playback tempo:

While holding down [METRONOME], press TEMPO [+] or [-].

3 Press [DEMO/SONG] again to stop playback.

Demo Song List

The

d.01

and

d.05

Songs are re-arranged excerpts from the original compositions.

Display Voice name Descriptions

Grand Piano 1

Recorded samples from a full concert grand piano. Perfect for clas-

sical compositions as well as any other style that requires acoustic

piano.

Grand Piano 2

Spacious and clear piano with bright reverb. Good for popular

music

E.Piano 1 Created by FM synthesis. Good for popular music.

E.Piano 2

Simulates the sound of hammer-struck metallic “tines.” Soft tone

when played lightly, and an aggressive tone when played hard.

Harpsichord

The definitive instrument for baroque music. Since the strings of an

actual harpsichord are plucked, there is no touch response.

NOTE

You can play the keyboard along with the

demo song.

NOTE

No MIDI data will be output during Voice

Demo playback.

Display Voice Name Title Composer

d.01

Grand Piano 1 Prélude, Suite bergamasque C. A. Debussy

d.02

Grand Piano 2 — —

d.03

E.Piano 1 — —

d.04

E.Piano 2 — —

d.05

Harpsichord

Concerto a cembalo obbligato, 2 violini,

viola e continuo No.7, BWV.1058

J. S. Bach

Advanced Functions

Basic Operations and More

14 NU1 Owner’s Manual

Using the Metronome

The metronome feature is convenient for practicing with an accurate tempo.

1 Press [METRONOME] to start the metronome.

While the metronome sounds, a dot at the right side of the LED display and the

lamp of the metronome button flash on and off to the tempo.

2 Press [METRONOME] again to stop the metronome.

Adjusting the Tempo

During the operation described below, you can check the tempo value shown on the

display.

 To increase or decrease the value by 1:

While holding down [METRONOME], press [+] (or C#5 key) or [-] (or B4 key). Dur-

ing playback, simply press [+] or [-].

 To increase or decrease the value by 10:

While holding down [METRONOME], press the D5 or A#4 key.

 To reset the value to the default (120):

While holding down [METRONOME], press the C5 key or press [+] and [-] simulta-

neously. During playback, press both [+] and [-] simultaneously.

Selecting the Beat

While holding down [METRONOME], press one of the C3–F3

keys. The selected value is shown on the display while both

controls are held.

Only the first beat is accented with a bell sound when set to a value other than 0.

Adjusting the Metronome volume

While holding down [METRONOME], press one of the C1–G2 keys to set the vol-

ume. The specified value is shown on the display while both controls are held.

120.

The beat lamp flashes

at the current tempo

Setting range: 5 to 500 beats per minute

Default setting: 120

NOTE

The metronome tempo is restored to the

default setting when the power is turned off.

C5 D5B4

A#4C#5

Default setting: 0 (No downbeat)

NOTE

The Beat of the metronome is restored to

the default setting when the power is turned

off.

Display Key Beat Display Key Beat

C3 0 (no downbeat)

D#34

C#3 2

E3 5

D3 3

F3 6

Beat

C3 F3

Setting range: 1–20

Default setting: 15

NOTE

The metronome volume setting is retained

even when the power is turned off.

C1 (1) G2 (20)D2 (15)

The volume level increases as you press higher keys

max.min.

Basic Operations and More

NU1 Owner’s Manual 15

Changing the Touch Sensitivity

You can specify the Touch Sensitivity (how the sound responds to the way you play the keys).

While holding down [PIANO/VOICE], press one of the A6–C7 keys. The selected

Touch Sensitivity is shown on the display while both controls are held.

Adding Variations to the Sound (Reverb)

The Reverb effect reproduces the realistic acoustic ambience of grand piano.

To turn on or off the Reverb:

Press [REVERB] repeatedly (as necessary).

To adjust the Reverb Depth:

While holding down [REVERB], press [+] or [-]. The current value is shown on the

display while both controls are held.

To restore the default value (2), press [+] and [-] simultaneously while holding

[REVERB].

A6 C7

Default setting: 2 (Medium)

NOTE

The touch type is restored to the default

setting when the power is turned off.

NOTE

This setting does not change the weight of

the keyboard, but only the response.

Display Key Touch Sensitivity Descriptions

OFF

A6 Fixed

The volume level does not change at all regardless of

whether you play the keyboard soft or hard.

A#6 Soft

The volume level does not change much when you play the

keyboard soft or hard.

B6 Medium This is the standard piano touch response.

C7 Hard

The volume level changes very widely from pianissimo to

fortissimo to facilitate dynamic and dramatic expression. You

have to hit the keys hard to produce a loud sound.

Lights up when REVERB is on.

Setting range: 1–20

Default setting: 2

NOTE

The Reverb Depth is restored to the default

setting when the power is turned off.

NOTE

Holding [REVERB] shows the Reverb Depth

value on the display.

Basic Operations and More

16 NU1 Owner’s Manual

Transposing the Pitch in semitones

You can shift the pitch of the entire keyboard up or down in semitones to facilitate playing in difficult key signatures

and match the pitch of the keyboard to the range of a singer or other instruments. For example, if “+5” is selected,

playing the key C produces a pitch of F, letting you play a song of F major as though it were in C major.

 To transpose the pitch down:

While holding down [FUNCTION], press a key between F#2 (-6) and B2 (-1).

 To transpose the pitch up:

While holding down [FUNCTION], press a key between C#3 (+1) and F#3 (+6).

 To restore the original pitch:

While holding down [FUNCTION], press the C3 key.

The specified value is shown on the display.

Fine tuning the Pitch

You can fine-tune the pitch of the entire instrument. This function is useful when you play this instrument along with

other instruments or recorded music.

During the operation described below, you can check the Pitch

value shown on the display.

 To tune up (in roughly 0.2Hz steps):

While holding down [FUNCTION], press [+]. Holding down

both buttons shows the current pitch setting (Hz).

 To tune down (in roughly 0.2Hz steps):

While holding down [FUNCTION], press [-]. Holding down both buttons shows the

current pitch setting (Hz).

 To restore standard pitch:

While holding down [FUNCTION], press [+] and [-] simultaneously. Holding down

all three buttons shows the current pitch setting (Hz).

Default setting: 0 (Normal pitch)

Setting range: -6 – 6

NOTE

The Transpose value is restored to the

default setting when the power is turned off.

F#3F#2

0-1

-2 +1 +3-4

-3-5 +2+4+5

-6 +6

Transpose up.

Transpose down.

Normal pitch

NOTE

The tuning value is retained even when the

power is turned off.

Hz (Hertz):

This unit of measurement refers to the fre-

quency of a sound and represents the num-

ber of times a sound wave vibrates in a

second.

Setting range: 414.8–466.8Hz (=A3)

Default setting: 440.0Hz (=A3)

42.0

Example: 442Hz

Basic Operations and More

NU1 Owner’s Manual 17

Setting the Scale Tuning

You can select various scales for the instrument. Equal Temperament is the most common contemporary piano tuning

scale. However, history has known numerous other scales, many of which serve as the basis for certain genres of

music. This feature lets you experience the tunings of these genres.

Selecting a Scale

While holding down [FUNCTION], press one of the C5–F#5 keys. Holding down

both controls shows the current value on the display.

Selecting the Base Note

While holding down [FUNCTION], press one of the C4–B4 keys. Holding down both

controls shows the current value on the display.

Default setting: 1 (Equal)

NOTE

The scale is restored to the default setting

when the power is turned off.

Display Key Scale Description

C5 Equal

The pitch range of each octave is divided equally into twelve

parts, with each half-step evenly spaced in pitch. This is the

most commonly used tuning in music today.

C#5 Pure Major These tunings preserve the pure mathematical intervals of

each scale, especially for triad chords (root, third, fifth). You can

hear this best in actual vocal harmonies — such as choirs and

a cappella singing.

D5 Pure Minor

D#5 Pythagorean

This scale was devised by the famous Greek philosopher and

is created from a series of perfect fifths, which are collapsed

into a single octave. The 3rd in this tuning are slightly unstable,

but the 4th and 5th are beautiful and suitable for some leads.

E5 Mean-Tone

This scale was created as an improvement on the Pythagorean

scale, by making the major third interval more “in tune.” It was

especially popular from the 16th century to the 18th century.

Handel, among others, used this scale.

F5 Werckmeister

This composite scale combines the Werckmeister and Kirn-

berger systems, which were themselves improvements on the

mean-tone and Pythagorean scales. The main feature of this

scale is that each key has its own unique character. The scale

was used extensively during the time of Bach and Beethoven,

and even now it is often used when performing period music on

the harpsichord.

F#5 Kirnberger

F#5

Default setting: C

NOTE

The base note is restored to the default set-

ting when the power is turned off.

Key Base Note Key Base Note Key Base Note Key Base Note

C4 C D#4Eb F#4F# A4 A

C#4 C# E4 E G4 G A#4 Bb

D4 D F4 F G#4Ab B4 B

B4C4

F~ G A_

Example:

(Followed by a high bar if sharp)

GAb

(Followed by a low bar if flat)

18 NU1 Owner’s Manual

Playing Back Songs

This instrument can play back Songs contained in internal memory or USB memory connected to the [USB TO

DEVICE] terminal. There are two kinds of Songs that can be played back: MIDI Songs and Audio Songs.

MIDI Songs and Audio Songs

A MIDI Song contains data of your keyboard performance (such as which keys you played and how hard you played

them), and is not a recording of the actual sound itself. The performance information refers to which keys are played,

at what timing, and at what strength—just as in a musical score. Based on the recorded performance information, the

tone generator (of the digital piano, etc.) outputs the corresponding sound. A MIDI Song uses a small amount of data

capacity in comparison to audio recording.

An Audio Song is a recording of the performed sound itself. This data is recorded in the same way as that used in

recording cassette tapes, or with voice recorders, etc. This data can be played with a portable music player, etc.,

allowing you to easily let other people hear your performance.

Songs compatible with this instrument

Song Category List

* Shown only when USB flash memory is connected.

** When data does not exist, the song number is not displayed.

Song data formats that can be played

 SMF (Standard MIDI File) Formats 0 and 1

One of the most common and widely compatible MIDI formats used for storing

sequence data. MIDI Songs recorded in this instrument are saved as SMF Format 0.

 WAV format (.wav)

Audio file format commonly used by computers. This instrument can play 44.1kHz/

16bit stereo WAV files. Audio Songs recorded on this instrument are saved in this for-

mat.

User Songs and External Songs

Songs recorded by this instrument are

called “User Songs” while Songs created in

other ways or on other instruments are

called “External Songs.” In USB flash

memory, Songs in the USER FILES folder

are handled as User Songs while Songs in

a location other than the USER FILES folder

are handled as External Songs. When you

record a Song to USB flash memory, a

USER FILES folder is created automatically

and the resulting User Song will be saved

in this folder.

NOTE

[xx] indicates numerals.

Song Category

Song

Number

Descriptions

Voice Demo Song

(MIDI Song)

d.01

–

d.05

Each Song effectively demonstrates each of this

instrument’s Voices.

Preset Song

(MIDI Song)

P.01

–

P.50

50 Piano Preset Songs in the instrument. These cor-

respond to the scores in the book “50 greats for the

Piano,” included for your convenience and enjoy-

ment.

xx*

Audio Song in USB

flash memory

A.00

–

A.99

User Songs which have been recorded with this

instrument (page 24)

C.00

–

C.99

External Songs, commercially available or which

have been recorded on a computer, etc.

xx*

MIDI Song in USB

flash memory

S.00

–

S.99

User Songs which have been recorded with this

instrument (page 24)

F.00

–

F.99

External Songs, commercially available or which

have been recorded on a computer, etc.

MIDI Song in this

instrument

U.01

–

U.10

User Songs which have been recorded to the instru-

ment (page 21)

L.00

–

L.99

External Songs (commercially available or which

have been recorded on a computer, etc.) transferred

from a computer to this instrument.

Playing Back Songs

NU1 Owner’s Manual 19

Playing back Songs

While holding down [DEMO/SONG], press [+] or [-] until the

desired Song Category (page 18) appears on the display.

The Song Categories will appear on the display in the following order:

xx  (

xx)  (

xx) 

xx 

xx  etc. If you wish to play back a

“

xx,” “

xx,” or “

xx” song, select the Song Category “

xx,” “

xx,” or “

xx.”

2 Press [+] or [-] to select the desired Song number, or “*

.rd

”

(random) or “*

.AL

”(all).

To select “

xx,” “

xx,” or “

xx,” continue holding down [+] until they appear,

or press [-] repeatedly. “

xx” will appear after “

A.99

,” “

xx” will appear after

“

S.99

,” and “

xx” will appear after “

U.10

” on the display. (When data does not

exist, the song number is not displayed.)



When a specific Song number (such as

P.01

and

U.01

) is selected:

Only the selected Song will be played back.

 When “*

.rd

” or “*

.AL

” is selected:

.rd

........ Plays back the Songs of this type continuously in random order.

.AL

........ Plays back all the Songs of this type continuously in sequential order.

The asterisk (*) indicates “

,”“

,” or “

” designations in the display.

For details, refer to page 18.

3 Press [PLAY/STOP] to start playback.

During playback, the current measure number (in the case of MIDI Songs) or

playing time (in the case of Audio Songs) is shown on the display.

Adjusting the tempo (only for MIDI Songs)

While holding down [METRONOME], press [+] or [-] to adjust the tempo. To

reset the tempo to default, press [+] and [-] simultaneously while holding down

[METRONOME]. For details, refer to page 14.

Adjusting the volume (only for Audio Songs)

The volume level of this instrument may be markedly different from that of a

commercially available Audio Song or one recorded on another device. To adjust

the volume of the Audio Song, hold down [DEMO/SONG] and press one of the

C1–G2 keys.

Rewind/Fast forward

During playback, press [-] or [+] to move back or forth through the measures.

Returning to the Song Top

During playback, press [-] and [+] simultaneously to jump to the top of the Song.

To play back a Song on a USB flash memory:

Read “Connecting USB flash memory” (page 23), then connect the USB flash memory to the [USB TO DEVICE] ter-

minal, and follow the instructions below.

NOTE

“

xx” and “

xx” are shown only when

USB flash memory is connected.

NOTE

Song indications such as “

F.00

” and

“

C.00

” may not appear immediately

depending on the amount of the folders in

the USB flash memory.

NOTE

The metronome can be used during play-

back. It will automatically stop when play-

back is stopped.

NOTE

When playing back MIDI Songs containing

Voices that are incompatible with this

instrument such as XG and GM Songs, the

Voices may not sound as intended on the

original. In addition, Song data of the MIDI

channels 3 – 16 cannot be played back

because this instrument can recognize only

the MIDI channels 1 and 2. This is why you

should only play back Songs which have

data of only MIDI channels 1 – 2, to which

the piano performance is assigned.

NOTE

You can play the keyboard along with Song

playback. You can also change the Voice

for your keyboard performance.

1. 2. 0.01. 0.02.

MIDI Song

Current measure

number

Audio Song

Playing time

Indicates minutes. In

case of 10 minutes or

more, only the low-

est digit is shown.

Indicates

seconds.

Setting range: 1 – 20

Default setting: 16

C1 (1) G2 (20)A1 (10)

The higher the key, the greater the volume.

max. min.

Playing Back Songs

20 NU1 Owner’s Manual

4 Press [PLAY/STOP] again to stop playback.

If a specific Song number is selected in Step 2, playback stops automatically by

reaching the end of the Song.

Setting range: JA (Japanese) / Int (Interna-

tional)

Default setting: Int

Setting the Character Code

If the Song cannot be called up, you may need to select the appropriate Character

Code from the following two settings.

 International

For playing back Songs with names using western European characters (including

umlaut or diacritic marks). To select this, turn on the power while holding down the

A-1 and A#-1 keys.

 Japanese

For playing back Songs with names using Japanese characters. To select this, turn on

the power while holding down the A-1 and B-1 keys.

A#-1A-1

B-1A-1

NU1 Owner’s Manual 21

Recording Your Performance

This instrument allows you to record your performance by using one of the following two methods. The recorded

performance can be played back as a User Song.

 MIDI recording

With this method, your keyboard performances are recorded and saved to the instrument or USB flash memory as a

MIDI Song (via the SMF format 0). Up to 10 Songs can be recorded to the instrument. although more can be

recorded to USB flash memory (see below).

 Audio recording

With this method, your keyboard performances are recorded then saved to USB flash memory as an Audio Song in

stereo WAV format of normal CD-quality resolution. The saved Audio Song can be transmitted to then played on por-

table music players. The recordable time differs depending on the capacity of the USB flash memory.

1 Connect a USB flash memory to the [USB TO DEVICE] terminal.

2 Select the Recording method.

 To make a MIDI Recording:

While holding down [DEMO/SONG], press [+] or [-] until “

**” (for saving

data to the instrument) or “

**” (for saving data to the USB flash memory) is

shown on the display.

 To make an Audio Recording:

While holding down [DEMO/SONG], press [+] or [-] until “

**” (for saving

data to the USB flash memory) is shown on the display.

3 Press [+] or [-] to select a Song number.

•

U.01

–

U.10

......User Song in this instrument (MIDI Song)

•

S.00

–

S.99

......User Song in USB flash memory (MIDI Song)

•

A.00

–

A.99

......User Song in USB flash memory (Audio Song)

 When the selected Song contains already-recorded data:

You can confirm it by checking the display.

NOTICE

When the selected Song contains data, keep in mind that recording new data will erase

the existing data.

4 Select a Voice (page 13) and other parameters such as Beat

(page 14) and Reverb (page 15) for recording.

When is USB flash memory necessary?

MIDI Songs can be saved to internal memory of this instrument or to USB flash memory, while Audio Songs can only

be saved to the USB flash memory.

As necessary, prepare a USB flash memory referring to “Connecting USB flash memory” (page 23), then follow the

instructions below.

NOTE

Record mode cannot be called up in the fol-

lowing situations.

• During Song playback (page 18)

• During File operations (page 23)

When skipping Steps 1 to 4 with an

unrecordable Song selected:

Pressing [RECORD] selects the lowest

numbered Song (of those containing no

data) as the Recording target.

• If “

**” is selected, pressing [RECORD]

selects “

**” (Audio Song in the USB

flash memory).

• If “

**,” “

**,” or “

**” is

selected, pressing [RECORD] selects

“

**” (MIDI Song in internal memory).

If there is no empty User Song, “

U.0.1.

”

will be as the Recording target.

U.01U.0.1.

When Song contains data: When Song does not contain data:

Only the left-most dot lights up.

Three dots light up.

Using the Metronome

You can use the metronome while record-

ing, although the metronome sound will not

be recorded.

Recording Your Performance

22 NU1 Owner’s Manual

5 Press [RECORD] to engage the Record mode.

The [RECORD] lamp lights up, and the [PLAY/STOP] lamp flashes according to

the current tempo.

To exit from the Record mode, press [RECORD] again.

6 Start recording.

 With MIDI Recording:

Play a note on the keyboard or press [PLAY/STOP] to start recording. While

recording, the current measure number is shown on the display.

 With Audio Recording:

Press [PLAY/STOP] to start recording. While recording, the elapsed time is

shown on the display.

7 Press [RECORD] or [PLAY/STOP] to stop recording.

Dashes appear on the display in succession, indicating that the recorded data is

being saved. After the data is saved, an “

End

” message appears for three sec-

onds followed by the Song number, indicating that the Record mode is disen-

gaged.

NOTICE

While dashes appear in the display in succession, never turn off the power or disconnect

the USB flash memory. Doing so may delete all Song data in the instrument, including

external Songs (page 18).

8 Press [PLAY/STOP] to hear the recorded Song.

To stop playback, press [PLAY/STOP] again.

If memory space is running low:

An “

EnP

” message will appear in the dis-

play after pressing [RECORD]. You can

start recording, but the memory may

become full during recording. We recom-

mend that you first remove any unneces-

sary files (page 25) to ensure sufficient

memory capacity.

FlashesLights up

1. 2.

Measure number

NOTE

With audio recording, the sound input from

the AUX IN jack is also recorded.

Deleting a Song file

If you want to delete the recorded Song, refer to page 25.

0.01. 0.02.

Indicates minutes. In

case of 10 minutes

or more, only the

lowest digit is

shown.

Indicates seconds.

Elapsed time

NU1 Owner’s Manual 23

Using USB Flash Memory

This instrument features several functions which handle the Song files, as listed below.

 Formatting USB flash memory



Copying a User MIDI file from the instrument to USB flash memory

 Deleting Song file from the instrument or from USB flash memory

Connecting USB flash memory

NOTE

File mode cannot be called up in the fol-

lowing situations.

• During Song playback/pause (page 18)

• Record mode (page 21)

Precautions when using the [USB TO

DEVICE] terminal

This instrument features a built-in [USB TO DEVICE]

terminal. When connecting a USB flash memory to the

terminal, be sure to handle the USB flash memory with

care. Follow the important precautions below.

NOTE

For more information about the handling of USB flash memory, refer to the owner’s

manual of the USB flash memory.

 Compatible USB flash memories

The instrument does not necessarily support all com-

mercially available USB flash memories. Yamaha can-

not guarantee operation of USB flash memories that

you purchase. Before purchasing a USB flash memory

for use with this instrument, please visit the following

web page:

http://download.yamaha.com/

NOTE

Other USB devices such as a computer keyboard or mouse cannot be used.

 Connecting USB flash memory

When connecting a USB flash memory to the [USB TO

DEVICE] terminal, make sure that the connector on the

device is appropriate and that it is connected in the

proper direction.

NOTICE

• When connecting a USB cable, make sure it is less than

3 meters.

• Though the instrument supports the USB 1.1 standard,

you can connect and use a USB 2.0 storage device with

the instrument. However, note that the transfer speed is

that of USB 1.1.

Using USB Flash Memory

By connecting the instrument to USB flash memory,

you can save data you’ve created to the connected USB

flash memory, as well as read data from it.

 Number of USB flash memories which

can be used

Only one USB flash memory can be connected to the

[USB TO DEVICE] terminal.

 Formatting USB flash memory

When accessing USB flash memory, a message may

appear prompting you to format the device/media. If

so, execute the Format operation (page 24).

NOTICE

The format operation overwrites any previously existing

data. Make sure that the media you are formatting does

not contain important data.

 To protect your data (write-protect)

To prevent important data from being inadvertently

erased, apply the write-protect provided with the USB

flash memory. If you are saving data to the USB flash

memory, make sure to disable write-protect.



Connecting/removing USB flash memory

Before removing the USB flash memory from the

[USB TO DEVICE] terminal, make sure that the instru-

ment is not accessing data (such as in the Save, Copy

and Delete operations).

NOTICE

Avoid frequently connecting/disconnecting the USB

flash memory too often. Doing so may result in the oper-

ation of the instrument “freezing” or hanging up. While

the instrument is accessing data (such as during Save,

Copy, Delete, Load and Format operations) or is mount-

ing the USB flash memory (shortly after the connection),

do NOT unplug the USB connector. Doing so may cor-

rupt the data on either or both devices.

MAX

PHONES USB TO DEVICE

MIN

MASTER VOLUME

Using USB Flash Memory

24 NU1 Owner’s Manual

Formatting USB flash memory

NOTICE

Executing the Format operation will delete all data in the USB flash memory. Before formatting, save important data to a com-

puter or another storage device.

1 Connect the USB flash memory to the [USB TO DEVICE] terminal.

2 While holding [FUNCTION] and [PLAY/STOP], press [RECORD].

“

For

” appears on the display for a while, then “

n Y

” appears. If you wish to

cancel this operation, press [-] at this timing.

3 Press [+] to execute the Format operation.

Dashes appear in succession on the display, indicating that Formatting is in pro-

cess. When the operation is completed, “

End

” appears on the display.

NOTICE

While dashes appear in succession on the display, never turn off the power or discon-

nect the USB flash memory.

Copying User Songs in the instrument to a USB flash memory

You can copy the User Song in the instrument to the USB flash memory. The copied Song is saved as SMF format 0 to

the “USER FILES” folder in the USB flash memory, and the file is automatically named as “USERSONG**.MID”

(**: numerals).

1 Connect the USB flash memory to the [USB TO DEVICE] terminal.

2 For the Copy source, select a User Song in this instrument.

For detailed instructions, refer to page 18.

3 While holding [FUNCTION], press [PLAY/STOP].

On the display, “

” appears for a while then the Song number (for example

“

S.00

”) appears as Copy destination.

To cancel the Copy operation before it begins, press any button other than

[PLAY/STOP] here.

4 Press [PLAY/STOP] to execute the Copy operation.

Dashes appears in succession on the display, indicating that the Copy operation is

in process. When the Copy is completed, “

End

” appears on the display.

NOTICE

When dashes appear in the display in succession, never turn off the power or discon-

nect the USB flash memory.

NOTE

When you execute a Song Recording (page

22), Copy (below) or Delete (page 25)

operation, a “

UnF

” prompt may appear in

the display, indicating that the USB flash

memory has not been formatted yet. In this

case, execute the Format operation by pro-

ceeding from Step 2 as described at left.

NOTE

If any Song other than one of the User

Songs is selected in Step 2, “

E01

”

appears in Step 3. In this case, return back

to Step 2.

NOTE

When there is insufficient free memory

capacity in the USB flash memory, the cop-

ied Song cannot be saved. To ensure suffi-

cient memory, try erasing unnecessary files

(page 25).

SAu S.00

Song number

(Example: “S.00”)

Using USB Flash Memory

NU1 Owner’s Manual 25

Deleting a Song file

A User Song can be deleted.

1 If necessary, connect the USB flash memory to the [USB TO

DEVICE] terminal.

2 Select the Song to be deleted.

For details on how to select a Song file, refer to page 19.

3 While holding down [FUNCTION], press [RECORD].

“

dEL

” appears on the display for a while, then “

n Y

” appears on the display. If

you wish to cancel this operation, press [-].

4 Press [+] to execute the Delete operation.

Dashes appear in succession on the display, indicating that the Delete is being

executed. When the operation is completed, “

End

” appears on the display.

NOTICE

While dashes appear in succession on the display, never turn off the power or discon-

nect the USB flash memory.

NOTE

Song Playback is not available after execut-

ing Step 3. Make sure to confirm the to-be-

deleted Song before executing Step 3.

NOTE

The operation here does not apply to Songs

transferred from the computer to this

instrument’s internal memory. If you want to

delete such a Song, use a computer.

26 NU1 Owner’s Manual

Backup data and Initializing

Backup data in internal memory

The following data, referred to as Backup data, as well as User Song data and External Song data will be maintained

even if the power is turned off.

• Character Code........................................page 20

• Tuning......................................................page 16

• I.A. Control on/off ..................................page 12

• I.A. Control Depth...................................page 12

• Half Pedal point.......................................page 11

• Metronome volume .................................page 14

• Audio Song volume.................................page 19

• AUX IN Noise Gate on/off......................page 28

Initializing the Backup data

While holding down the C7 key, turn on the power. “

CLr

” appears on the display, then the Backup data (with the

exception of “Character Code”) will be initialized. Note that User Songs and External Songs are not erased.

NOTICE

Do not turn off the power to this instrument while it is initializing the data in its internal

memory (while “

CLr

” is displayed).

NOTE

If this instrument somehow becomes dis-

abled or malfunctions, turn off the power to

the instrument, then perform the initializa-

tion procedure.

NU1 Owner’s Manual 27

Connections

CAUTION

Before connecting the instrument to other electronic components, turn off the power to all the components. Before turning

the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the

components may result.

Terminals

q USB [TO HOST] terminal

By connecting a computer to this terminal, you can transfer Song data between

the instrument and the computer via MIDI, and take advantage of sophisticated

computer music software. For details, refer to the “Computer-related Operations”

document.

w MIDI IN / OUT terminal

These terminals allow you to connect this instrument to another MIDI instrument.

For details, refer to “About MIDI” on page 29.

e AUX IN [L/L+R] [R] jack

By connecting the stereo cables to these jacks, the sound of another audio equip-

ment can be reproduced via the speakers of this instrument.

CAUTION

When the AUX IN jacks are connected to an external device, first turn on the power to the

external device, then to the instrument. Reverse this order when you turn the power off.

USB TO DEVICE

eq w r t

Refer to the “Panel Controls and Terminals” on page 8 for information on the location of the

connectors.

(Left side of the front sur-

face below the keyboard)

NOTE

Use an AB type USB cable of less than 3

meters. USB 3.0 cables cannot be used.

NOTE

Use only the AUX IN [L/L+R] jack for con-

nection with a mono device.

AUX OUT

OUTPUT

AUX IN

Audio cable

Stereo phone

plug (standard)

Phone plug

(standard)

Phone plug

(standard)

Phone plug

(standard)

Instrument

Keyboard or another audio

equipment

Connections

28 NU1 Owner’s Manual

 Minimizing noise of the input sound via Noise Gate

By default, this instrument cuts unwanted noise from the input sound. However,

this may result in wanted sounds also being cut, such as the soft decay sound of

the piano. To avoid this, set the Noise Gate to off via the following operation.

While holding down [FUNCTION], press the C#6 key repeatedly to toggle Noise

Gate on and off as needed.

r AUX OUT [L/L+R] [R] jacks

These jacks let you connect the instrument to external powered speaker systems,

for playing in larger venues at higher volumes.

CAUTION

When the AUX OUT jacks are connected to an external device, first turn on the power to

the instrument, then to the external device. Reverse this order when you turn the power

off. Also, before turning the power on or off to all components, set all volume levels to

minimum (0).

NOTICE

When the AUX OUT jacks are connected to an external device, never connect the [AUX

IN] jacks to the output jacks of the external device. Doing so could result in feedback

(oscillation) that may damage both the devices.

t [USB TO DEVICE] terminal

This terminal allows connection to USB flash memory. Refer to “Connecting

USB flash memory” on page 23 for more information.

Default setting: ON

C#6

NOTE

Use audio cables and adaptor plugs with no

resistance.

NOTE

Use only the AUX OUT [L/L+R] jacks for

connection with a mono device.

AUX INAUX OUT

Audio cable

Phone plug

(standard)

Phone plug

(standard)

Instrument

Powered speaker

NU1 Owner’s Manual 29

About MIDI

MIDI (Musical Instrument Digital Interface) is a global format standard

for performance data transmission and reception between electronic musi-

cal instruments. Connecting musical instruments that support MIDI via

MIDI cables enables you to transfer performance and setting data

between multiple musical instruments. Using MIDI, you can also achieve

more advanced performances than using just a single musical instrument.

Example for MIDI connection

Example 1:

The connection below allows you to play the sounds of an external MIDI tone generator from the keyboard of this

instrument.

Set the MIDI Receive Channel of the external MIDI tone generator to “1,” since the MIDI Transmit Channel of this

instrument is set to “1.”

Example 2:

The connection below allows you to play the sounds of this instrument by playing back a Song on an external

sequencer.

The MIDI Receive Channels of this instrument can only be set to 1 and 2. This is why the data for the piano part

should be assigned to MIDI Channels 1 and 2 of the Song.

Local Control on/off

Normally, playing the keyboard will control the internal tone generator. This situation is called “Local Control ON.”

If you want to use the keyboard only for controlling an external MIDI instrument, turn off Local Control. With this

setting, this instrument will produce no sound even if you play the keyboard.

 To turn the Local Control ON or OFF:

While holding down [FUNCTION], press the C6 key repeatedly (as necessary).

NOTE

You need a dedicated MIDI cable (optional) to make a MIDI con-

nection.

NOTE

The handled MIDI messages differ depending on the MIDI

instrument. It means that some MIDI messages transmitted from

this instrument may not be recognized by the separate MIDI

instrument. This is why you should check the MIDI Implementa-

tion Chart of each MIDI instrument. The MIDI Implementation

Chart of this instrument is described in the MIDI Reference.

NOTE

During Song playback, data of only MIDI channels 3 – 16 will be

output via MIDI.

Receives MIDI data. Transmits MIDI data.

MIDI OUT MIDI IN

Performance data

NU1

MIDI tone generator

MIDI IN MIDI OUT

Song data

NU1

Sequencer

Default setting: ON

30 NU1 Owner’s Manual

Message List

* When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes.

* Press any button to exit from these message displays.

Message Descriptions

CLr

Initializing to the default settings.

con

Displayed when Musicsoft Downloader is started on a computer connected to the instrument. When

this message appears, you cannot operate the instrument.

E01

Displayed when the character code (page 20) is not appropriate for the file name of the Song which

you are selecting. Switch the character code.

Displayed when the data format is not compatible with this instrument, or the data has some other

problems. This Song cannot be selected.

Displayed when no USB flash memory can be found, or a problem has occurred in the USB flash

memory. Disconnect and connect the device again, then execute the operation. If this message

appears repeatedly even when there aren't any other likely problems, the USB flash memory may be

damaged.

E02

Indicates that the USB flash memory is protected.

E03

Displayed when the memory of the USB flash memory becomes full, or the number of files and fold-

ers exceeds the system limit.

E04

Displayed when conversion to audio, Audio Song playback or recording has failed. If you are using a

USB flash memory to which data has already been stored or deleted a number of times, first make

sure that the device does not contain important data, then format it (page 24) and connect to the

instrument again.

EE1

A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-

tributor.

EEE

A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-

tributor.

End

Displayed when the current operation is completed.

EnP

The memory of the instrument or the USB flash memory is running out. We recommend that you

remove any unnecessary files (page 25) to ensure sufficient memory capacity before start recording.

FUL

Since the memory of the instrument or the USB flash memory is insufficient, the operation could not

be completed. If this message appears during recording, the performance data may not be recorded

properly.

n Y

Confirms whether each operation is executed or not.

Pro

Displayed when you try to overwrite or delete a protected Song or read-only file. Use a read-only file

after cancelling the read-only setting.

UnF

Displayed when an unformatted USB flash memory is connected. First make sure that the device

does not contain important data, then format it (page 24).

Uoc

Communication with the USB flash memory has been shut down because of overcurrent to the USB

flash memory. Disconnect the USB flash memory from the [USB TO DEVICE] terminal, then turn on

the power of the instrument again.

UU1

Communication with the USB flash memory has failed. Remove the USB flash memory and make the

connection again. If the message appears even when the USB flash memory is connected properly,

the USB flash memory may be damaged.

UU2

This USB flash memory is not supported on this instrument, or too many USB flash memories may

have been connected. Refer to “Connecting USB flash memory” (page 23) for information on the USB

flash memory connection.

Appendix

NU1 Owner’s Manual 31

Troubleshooting

* The message list (page 30) is also provided for your reference.

Problem Possible Cause and Solution

The instrument does not turn

on.

The instrument has not been plugged in properly. Securely insert the female plug into

the socket on the instrument, and the male plug into a proper AC outlet (page 9).

Noise is heard from the

speakers or headphones.

The noise may be due to interference caused by the use of a mobile phone in close

proximity to the instrument. Turn off the mobile phone, or use it further away from the

instrument.

A click or pop is heard when

the power is turned on or off.

Electrical current is being applied to the instrument. This is normal.

The overall volume is low, or

no sound is heard.

• The Volume is set too low: set it to an appropriate level using the [MASTER VOL-

UME] control (page 10).

• Make sure a pair of headphones is not connected to the headphones jack (page 12).

• Make sure that Local Control (page 29) is on.

The pitch and/or tone of the

Piano Voices in certain

ranges do not sound right.

The Piano Voices attempt to precisely simulate actual piano sounds. However, as a

result of sampling algorithms, overtones in some ranges may sound exaggerated, pro-

ducing a somewhat different pitch or tone. This is normal, and no cause for concern.

Sound is not heard on a par-

ticular key.

Keyboard may not function normally if the key was pressed when the power was

turned on. Turn off the power and turn it again to reset the function. Do not touch any

keys when turning the power on (page 10).

Sound input to the AUX IN

jacks is interrupted.

The output volume of the external device connected to this instrument is too low, result-

ing in the sound being cut off via the Noise Gate after it is input to this instrument.

• Increase the output volume of the external device. The volume level reproduced via

this instrument’s speakers can be adjusted by using the [MASTER VOLUME] control.

• Set the Noise Gate to off (page 28).

The USB flash memory has

hung up (stopped).

• Disconnect the USB flash memory and connect it to the instrument again.

• The USB flash memory is not compatible with the instrument. Only use the USB

flash memory whose compatibility has been confirmed by Yamaha (page 23).

Mechanical noise is heard

during performance.

The keyboard mechanism of this instrument simulates the keyboard mechanism of an

actual piano. Mechanical noise is also heard on a piano.

When playing the same key

repeatedly and quickly or

playing a trill continuously for

a long time, a sound louder

than expected (considering

your playing strength) might

very occasionally occur.

This might be caused by the mechanical structure of the keys and the action; this is

normal, but only very seldom occurs.

32 NU1 Owner’s Manual

Maintenance

To keep your instrument in optimum condition, we recommend that you periodically follow the maintenance points

below.

 Instrument and Bench Maintenance

When cleaning the instrument, use a soft, dry or slightly damp cloth.

NOTICE

Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch the instru-

ment's finish.To keep the surface polished, apply commercially available piano polisher to a soft cloth and wipe the

instrument’s surface with it. Then, polish it with a separate cloth. Before using any piano polisher, make sure to read

the instructions for proper usage.

 Keyboard Maintenance

After wiping off the dirt with a slightly moistened soft cloth, wipe again with a dry cloth. For stubborn stains on the

white keys, use a piano cleaner (sold separately). When using such a cleaner, be careful not to allow the cleaner to

touch the black keys. After use, make sure to wipe with a dry cloth to remove any remaining piano cleaner.

 Pedal Cleaning

As with an acoustic piano, pedals may become tarnished over years of use.

When this occurs, polish the pedal with a compound designed for piano pedals. Before using the compound, make

sure to read the instructions for proper usage.

 Tuning

Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be user-

adjusted to match other instruments). This is because the pitch of digital instruments is always maintained perfectly.

However, if you feel there is something abnormal concerning the keyboard touch, contact your Yamaha dealer.

NU1 Owner’s Manual 33

Specifications

* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or

modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in

every locale, please check with your Yamaha dealer.

Optional Accessories

Size/Weight

Dimensions

Width 1,501mm (59-1/8")

Height 1,024mm (40-5/16")

Depth 463mm (18-1/4")

Weight 109kg (240Ibs., 5oz)

Control Interface

Keyboard

Number of Keys 88 (A-1–C7)

White keys Acrylic resin

Black keys Phoenolic resin

Touch Sensitivity Fixed/Soft/Medium/Hard

Pedal

Number of Pedals 3

Half Pedal Yes

Functions Damper (with half-pedal effect), Sostenuto, Soft

GP Responsive Damper Pedal Yes

Display Type 7-Segment LED

Panel Language English

Cabinet

Fallboard Yes

Music Rest Yes

Tone Generation/

Voices

Tone Generation Tone Generation Technology CFX Sampling

Piano Tone Gen-

eration Effects

Sustain Samples Yes

Key-off Samples Yes

String Resonance Yes

Polyphony Number of Polyphony (Max.) 256

Preset Number of Voices 5

Effects Type Reverb Yes

Recording/

Playback (MIDI

Songs)

Recording

Number of Songs 10

Number of Tracks 1

Data Capacity (max.) approx. 1.5 MB (approx. 550KB/Song)

Playback Data Capacity (max.) approx. 550KB/Song

Preset Number of Preset Songs 50 Preset Songs, 5 Voice Demo Songs

Data Format

Recording SMF (Format 0)

Playback SMF (Format 0, Format 1), ESEQ

Recording/

Playback (Audio

Songs)

Length of Recording/Playback (max.) 80 minutes/song

Data Format .wav (44.1 kHz sample rate, 16 bit resolution, stereo)

Functions Overall Controls

Metronome Yes

Tem po Yes

Transpose Yes

Tuning Yes

Scale Type 7

Intelligent Acoustic Control Yes

Storage

Internal Memory approx. 1.5MB (recording capacity + external Songs)

External Device USB flash memory (optional)

Connectivity Connectors

MIDI IN/OUT

Headphones PHONES x 2

AUX IN [L/L+R] [R]

AUX OUT [L/L+R] [R]

USB TO DEVICE Yes

USB TO HOST Yes

Amplifiers and

Speakers

Amplifiers (40W + 40W) x 2

Speakers (16cm + 1.9cm) x 2

Accessories Included Accessories

Owner’s Manual, AC Power Cord, Felt Key Cover,

Bench (included or optional depending on locale),

My Yamaha Product User Registration, Felt Strips x 3,

50 greats for the Piano (Music Book)

Headphones HPE-160

34 NU1 Owner’s Manual

Accessories ...................................5

Audio recording .........................21

Audio Song .................................18

AUX IN .......................................27

AUX OUT ..................................28

Backup ........................................26

Beat .............................................14

Character Code ...........................20

Computer-related Operations ......5

Copy ............................................24

Delete ..........................................25

Demo Song List .........................13

Display ..........................................8

Equal ...........................................17

External Song .............................18

Fast forward ................................19

Format (USB flash memory) ....24

GP Responsive Damper Pedal ..11

Half Pedal Point .........................11

Half-pedal ...................................11

Headphone ..................................12

Hz (Hertz) ...................................16

I.A. Control

(Intelligent Acoustic Control)

...12

Initializing ...................................26

Kirnberger ...................................17

Local Control on/off ..................29

Maintenance ...............................32

Master Volume ...........................10

Mean-Tone ..................................17

Message List ...............................30

Metronome .................................14

MIDI ......................................27, 29

MIDI Basics .................................5

MIDI recording ..........................21

MIDI Reference ...........................5

MIDI Song ..................................18

Music Rest ....................................9

Noise Gate ..................................28

Optional Accessories .................33

Pedal ............................................11

Pitch ............................................16

Playback

all

.........................................19

Audio Songs .......................18

Demo Song .........................13

MIDI Songs ........................18

random ................................19

Power ............................................9

PRECAUTIONS ..........................6

Pure Major ..................................17

Pure Minor ..................................17

Pythagorean ................................17

Quick Operation Guide .............35

Recording ....................................21

Reverb .........................................15

Rewind ........................................19

Scale ........................................... 17

Song ............................................ 18

Song Category ........................... 18

Specifications ............................ 33

Tempo ................................... 13–14

Touch Sensitivity ....................... 15

Transpose ................................... 16

Troubleshooting ........................ 31

Tuning ........................................ 16

USB Flash Memory .................. 23

USB TO DEVICE ............... 23, 28

USB TO HOST ......................... 27

User Song .................................. 18

Vo i c e ........................................... 13

Voice Demo Song ...................... 13

Voi c e L is t ................................... 13

Vo l u m e

Master Volume

.................. 10

Metronome Volume .......... 14

Werckmeister ............................. 17

Index

+6+3+1 2 4 7

On/

OFF

-2-4-6

0+2+4+5

F# G# A#D#C#

CD 13 5 6

On/

OFF

On/

OFF

EFGAB-5 -3 -1

+3+1-2

0+2-3 -1

MIN MAX

6530

531

1286

14 16

171513

2018 +10

De-

fault

-10

-1

1+1-2 +3

32-1 0 +2 +4 OFF

531

1286

14 16

171513

2018

nm,.⁄0vb

⁄2

⁄3

MIN MAX

⁄1

Quick Operation Guide

While holding down the button on the control panel, press one of the corresponding keys shown below

to select songs, or set parameters.

z Metronome Volume (page 14)

x Metronome Time Signature (page 14)

c Metronome/Song Tempo (page 14)

v I.A. Control ON/OFF (page 12)

b I.A. Control Depth (page 12)

n Transpose (page 16)

m Base Note (page 17)

, Scale (page 17)

. Local Control on/off (page 29)

⁄0 AUX IN Noise Gate ON/OFF (page 28)

⁄1 Audio Song Volume (page 19)

⁄2 Half Pedal Point (page 11)

⁄3 Touch Sensitivity (page 15)

36 NU1 Owner’s Manual

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not

be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your

national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or

the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask

for the correct method of disposal.

(weee_eu_en)

Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte

Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektrische Geräte

nicht mit dem normalen Haushaltsabfall entsorgt werden.

In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC bringen Sie alte Geräte bitte zur fachgerechten

Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen.

Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen, und verhindern mögliche negative

Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsorgung auftreten könnten.

Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte kontaktieren Sie bitte Ihre örtliche Stadt- oder

Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.

[Information für geschäftliche Anwender in der Europäischen Union]

Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder Zulieferer für weitere Informationen.

[Entsorgungsinformation für Länder außerhalb der Europäischen Union]

Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie bitte Ihre

örtlichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode.

(weee_eu_de)

Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques.

Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne

doivent pas être mélangés avec les déchets domestiques habituels.

Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez les

déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC.

En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de

précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d'un traitement

inapproprié des déchets.

Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez contacter

votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits.

[Pour les professionnels dans l'Union Européenne]

Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur ou

fournisseur pour plus d'informations.

[Information sur le traitement dans d'autres pays en dehors de l'Union Européenne]

Ce symbole est seulement valable dans l'Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements électriques et

électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée.

(weee_eu_fr)

Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo

Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos

usados no deben ser mezclados con desechos hogareños corrientes.

Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de

acuerdo a su legislación nacional y las directivas 2002/96/EC.

Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre

la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos.

Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión

de residuos o el punto de venta en el cual usted adquirió los artículos.

[Para usuarios de negocios en la Unión Europea]

Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor información.

[Información sobre la Disposición en otros países fuera de la Unión Europea]

Este símbolo sólo es válido en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y

pregunte por el método correcto de disposición.

(weee_eu_es)

NU1 Owner’s Manual 37

The name plate of this product may be found on the bottom of

the unit. The serial number of this product may be found on or

near the name plate. You should note this serial number in the

space provided below and retain this manual as a permanent

record of your purchase to aid identification in the event of

theft.

Model No.

Serial No.

(bottom_en)

La plaque signalétique de ce produit se trouve dans le bas de

l'unité. Le numéro de série de ce produit se trouve sur ou près

de la plaque signalétique. Notez-le dans l'espace fourni ci-

dessous et conservez ce manuel en tant que preuve

permanente de votre achat afin de faciliter l'identification du

produit en cas de vol.

N° de modèle

N° de série

(bottom_fr)

La placa de identificación de este producto se encuentra en la

parte inferior de la unidad. El número de serie de este

producto se encuentra en la placa de identificación o cerca de

ella. Debe anotar dicho número en el espacio proporcionado a

continuación y conservar este manual como comprobante

permanente de su compra para facilitar la identificación en

caso de robo.

N° do modelo

Nº de serie

(bottom_es)

Das Typenschild dieses Produkts befindet sich an der

Unterseite des Geräts. Die Seriennummer dieses Produkts

befindet sich auf dem Typenschild oder in der Nähe davon. Sie

sollten diese Seriennummer an der unten vorgesehenen Stelle

eintragen und dieses Handbuch als dauerhaften Beleg für

Ihren Kauf aufbewahren, um im Fall eines Diebstahls die

Identifikation zu erleichtern.

Modell Nr.

Seriennr.

(bottom_de)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

IMPORTANT. The wires in this mains lead are coloured in

accordance with the following code:

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured makings identifying the

terminals in your plug proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal

of the three pin plug.

(2 wires)

For details of products, please contact your nearest Yamaha

representative or the authorized distributor listed below.

Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha

ou au distributeur le plus proche de vous figurant dans la liste suivante.

Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten

Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen

Bestimmungsländern erhältlich.

Para detalles sobre productos, contacte su tienda Yamaha más

cercana o el distribuidor autorizado que se lista debajo.

CANADA

Yamaha Canada Music Ltd.

135 Milner Avenue, Toronto, Ontario,

M1S 3R1, Canada

Tel: 416-298-1311

U.S.A.

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, CA 90620,

U.S.A.

Tel: 714-522-9011

MEXICO

Yamaha de México, S.A. de C.V.

Av. Insurgentes Sur 1647 “Prisma Insurgentes”,

Col. San Jose Insurgentes, Del. Benito Juarez,

03900, Mexico, D.F.

Tel: 55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.

Rua Fidêncio Ramos, 302 – Cj 52 e 54 – Torre B –

Vila Olímpia – CEP 04551-010 – São Paulo/SP

Tel: 011-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A.,

Sucursal Argentina

Olga Cossettini 1553, Piso 4 Norte,

Madero Este-C1107CEK

Buenos Aires, Argentina

Tel: 54-11-4119-7000

VENEZUELA

Yamaha Music Latin America, S.A.,

Sucursal Venezuela

C.C. Manzanares Plaza P4

Ofic. 0401- Manzanares-Baruta

Caracas Venezuela

Tel: 58-212-943-1877

PANAMA AND OTHER LATIN

AMERICAN COUNTRIES/

CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.

Torre Banco General, Piso No.7, Marbella,

Calle 47 y Aquilino de la Guardia,

Ciudad de Panamá, República de Panamá

Tel: +507-269-5311

THE UNITED KINGDOM/IRELAND

Yamaha Music Europe GmbH (UK)

Sherbourne Drive, Tilbrook, Milton Keynes,

MK7 8BL, U.K.

Tel: 01908-366700

GERMANY

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: 04101-3030

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH

Branch Switzerland in Zürich

Seefeldstrasse 94, 8008 Zürich, Switzerland

Tel: 044-387-8080

AUSTRIA

Yamaha Music Europe GmbH Branch Austria

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-60203900

CZECH REPUBLIC/HUNGARY/

ROMANIA/SLOVAKIA/SLOVENIA

Yamaha Music Europe GmbH

Branch Austria (Central Eastern Europe Office)

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-60203900

POLAND/LITHUANIA/LATVIA/

ESTONIA

Yamaha Music Europe GmbH

Branch Poland Office

ul. Wrotkowa 14 02-553 Warsaw, Poland

Tel: 022-500-2925

BULGARIA

Dinacord Bulgaria LTD.

Bul.Iskarsko Schose 7 Targowski Zentar Ewropa

1528 Sofia, Bulgaria

Tel: 02-978-20-25

MALTA

Olimpus Music Ltd.

The Emporium, Level 3, St. Louis Street Msida

MSD06

Tel: 02133-2144

NETHERLANDS/BELGIUM/

LUXEMBOURG

Yamaha Music Europe Branch Benelux

Clarissenhof 5-b, 4133 AB Vianen, Netherlands

Tel: 0347-358 040

FRANCE

Yamaha Music Europe

7 rue Ambroise Croizat, Zone d'activites Pariest,

77183 Croissy-Beaubourg, France

Tel: 01-64-61-4000

ITALY

Yamaha Music Europe GmbH, Branch Italy

Viale Italia 88, 20020 Lainate (Milano), Italy

Tel: 02-935-771

SPAIN/PORTUGAL

Yamaha Music Europe GmbH Ibérica, Sucursal

en España

Ctra. de la Coruna km. 17,200, 28231

Las Rozas (Madrid), Spain

Tel: +34-91-639-88-88

GREECE

Philippos Nakas S.A. The Music House

147 Skiathou Street, 112-55 Athens, Greece

Tel: 01-228 2160

SWEDEN

Yamaha Music Europe GmbH Germany filial

Scandinavia

J. A. Wettergrensgata 1, Box 30053

S-400 43 Göteborg, Sweden

Tel: +46 31 89 34 00

DENMARK

Yamaha Music Europe GmbH, Tyskland – filial

Denmark

Generatorvej 6A, DK-2730 Herlev, Denmark

Tel: 44 92 49 00

FINLAND

F-Musiikki Oy

Kluuvikatu 6, P.O. Box 260,

SF-00101 Helsinki, Finland

Tel: 09 618511

NORWAY

Yamaha Music Europe GmbH Germany -

Norwegian Branch

Grini Næringspark 1, N-1361 Østerås, Norway

Tel: 67 16 78 00

ICELAND

Skifan HF

Skeifan 17 P.O. Box 8120, IS-128 Reykjavik,

Iceland

Tel: 525 5000

RUSSIA

Yamaha Music (Russia) LLC.

Room 37, bld. 7, Kievskaya street, Moscow,

121059, Russia

Tel: 495 626 5005

TURKEY/CYPRUS

Yamaha Music Europe GmbH

Merkezi Almanya Türkiye İstanbul Şubesi

Maslak Meydan Sokak No:5 Spring Giz Plaza

Bağımsız Böl. No:3, 34398 Şişli, İstanbul

Tel: +90-212-999-8010

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: +49-4101-3030

SOUTH AFRICA

Global Music Instruments

World of Yamaha

19 Eastern Service Road, Eastgate Ext.6, Sandton,

South Africa

Tel: +27-11-259-7700

OTHER COUNTRIES

Yamaha Music Gulf FZE

LOB 16-513, P.O.Box 17328, Jebel Ali,

Dubai, United Arab Emirates

Tel: +971-4-881-5868

THE PEOPLE’S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co.,Ltd.

2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,

Shanghai, China

Tel: 400-051-7700

HONG KONG

Tom Lee Music Co., Ltd.

11/F., Silvercord Tower 1, 30 Canton Road,

Tsimshatsui, Kowloon, Hong Kong

Tel: 2737-7688

INDIA

Yamaha Music India Pvt. Ltd.

Spazedge building, Ground Floor, Tower A, Sector

47, Gurgaon- Sohna Road, Gurgaon, Haryana, India

Tel: 0124-485-3300

INDONESIA

PT. Yamaha Musik Indonesia (Distributor)

Yamaha Music Center Bldg. Jalan Jend. Gatot

Subroto Kav. 4, Jakarta 12930, Indonesia

Tel: 021-520-2577

KOREA

Yamaha Music Korea Ltd.

8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,

Kangnam-Gu, Seoul, Korea

Tel: 02-3467-3300

MALAYSIA

Yamaha Music (Malaysia) Sdn., Bhd.

No.8, Jalan Perbandaran, Kelana Jaya, 47301

Petaling Jaya, Selangor, Malaysia

Tel: 03-78030900

SINGAPORE

Yamaha Music (Asia) Private Limited

Block 202 Hougang Street 21, #02-00,

Singapore 530202, Singapore

Tel: 65-6747-4374

TAIWAN

Yamaha Music & Electronics Taiwan Co.,Ltd.

2F., No.1, Yuandong Rd. Banqiao Dist.

New Taipei City 22063 Taiwan

Tel: 02-7741-8888

THAILAND

Siam Music Yamaha Co., Ltd.

3, 4, 15 and 16th floor, Siam Motors Building,

891/1 Rama 1 Road, Wangmai,

Pathumwan, Bangkok 10330, Thailand

Tel: 02-215-2622

VIETNAM

Yamaha Music Vietnam Company Limited

15th Floor, Nam A Bank Tower, 201-203 Cach

Mang Thang Tam St., Ward 4, Dist.3,

Ho Chi Minh City, Vietnam

Tel: +84-8-3818-1122

OTHER ASIAN COUNTRIES

http://asia.yamaha.com

AUSTRALIA

Yamaha Music Australia Pty. Ltd.

Level 1, 99 Queensbridge Street, Southbank,

Victoria 3006, Australia

Tel: 3-9693-5111

NEW ZEALAND

Music Works LTD

P.O.BOX 6246 Wellesley, Auckland 4680,

New Zealand

Tel: 9-634-0099

COUNTRIES AND TRUST

TERRITORIES IN PACIFIC OCEAN

http://asia.yamaha.com

NORTH AMERICA

CENTRAL & SOUTH AMERICA

EUROPE

AFRICA/MIDDLE EAST

ASIA

OCEANIA

DMI9

HEAD OFFICE: Yamaha Corporation Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650

WZ13580

Manual Development Department

Published 01/2015 POAP*.*-**C0

Printed in China

Yamaha Global Site

http://www.yamaha.com/

Yamaha Downloads

http://download.yamaha.com/

Transcripción de documentos

ENGLISH Hybrid Piano ESPAÑOL FRANÇAIS DEUTSCH NU1 Owner’s Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones Before using this instrument, be sure to read “PRECAUTIONS” on pages 6 – 7. EN Achten Sie darauf, vor Einsatz dieses Instruments die „VORSICHTSMASSNAHMEN“ auf Seiten 6-7 durchzulesen. DE Avant d'utiliser cet instrument, lisez attentivement la section « PRÉCAUTIONS D'USAGE » aux pages 6-7. FR Antes de utilizar el instrumento, lea la sección “PRECAUCIONES”, en las páginas 6-7. ES SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. See bottom of Keyboard enclosure for graphic symbol markings. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock. IMPORTANT NOTICE: All Yamaha electronic products are tested and approved by an independent safety testing laboratory in order that you may be sure that when it is properly installed and used in its normal and customary manner, all foreseeable risks have been eliminated. DO NOT modify this unit or commission others to do so unless specifically authorized by Yamaha. Product performance and/or safety standards may be diminished. Claims filed under the expressed warranty may be denied if the unit is/ has been modified. Implied warranties may also be affected. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This product MAY contain a small nonrechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. Warning: Do not attempt to recharge, disassemble, or incinerate this type of battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by applicable laws. Note: In some areas, the servicer is required by law to return the defective parts. However, you do have the option of having the servicer dispose of these parts for you. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. NOTICE: Service charges incurred due to lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. NAME PLATE LOCATION: The graphic below indicates the location of the name plate. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. Model Serial No. Purchase Date 92-469-q (bottom) 2 NU1 Owner’s Manual IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. (UL60065_03) FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B) COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620 Telephone : 714-522-9011 Type of Equipment : Hybrid Piano Model Name : NU1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. See user manual instructions if interference to radio reception is suspected. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC) NU1 Owner’s Manual 3 Thank you for choosing the Yamaha Hybrid Piano. In order to make the most of the performance potential and features of the instrument, please read the manuals thoroughly, and keep them in a handy place for later reference. This instrument, which combines the priceless value of an acoustic piano and versatile digital technology that provides exceptional flexibility to performers, is a true hybrid piano. Main Features Authentic acoustic piano touch with special upright piano action Featuring a specially designed mechanism in which the keyboard action and the hammer workings realistically reproduce those of an acoustic piano, this instrument provides a realistic touch response that is extraordinarily similar to an upright piano. CFX Sampling technology Sophisticated sampling using the latest technology was used to capture the luxurious sounds of Yamaha’s flagship CFX, a full-sized concert grand piano. The powerful bass and bright, penetrating midrange sound of the original CFX are reproduced faithfully, and give a particularly natural and wellbalanced overall piano sound. Best Condition without Tuning Unlike acoustic pianos, this instrument does not need to be tuned. It always stays perfectly in tune even after long-time use. Flexible Volume Control This instrument gives you full control over the instrument volume, letting you adjust the level just as desired. Also, you can play or listen in total privacy through one or two pairs of headphones. Audio Playing and Recording from a USB Flash Memory Audio files (.wav) saved to a USB flash memory can be played back on the instrument. Moreover, since you can record your performance as audio data to a USB flash memory device, it is possible to listen to your performance on portable music players, with the data transferred by computer. 4 NU1 Owner’s Manual Table of Contents PRECAUTIONS ....................................................... 6 Connections ............................................................... 27 About MIDI .................................................................. 29 Example for MIDI connection.................................. 29 Local Control on/off................................................. 29 Introduction Getting started playing your new Hybrid Piano Panel Controls and Terminals .................................... 8 Playing the Keyboard .................................................. 9 Using the Pedals .....................................................11 Using Headphones (Optional) .................................12 I.A. Control (Intelligent Acoustic Control).................12 Advanced Functions This section explains how to make detailed settings for the instrument’s various functions. Basic Operations and More ...................................... 13 Appendix This section includes a list of display messages, Quick Operation Guide and other information. Message List .............................................................. 30 Troubleshooting......................................................... 31 Maintenance ............................................................... 32 Specifications............................................................. 33 Index............................................................................ 34 Quick Operation Guide * ........................................... 35 * This is a quick reference for operation of the functions assigned to the buttons and keyboard. Selecting a Voice.....................................................13 Listening to the Voice Demo Songs ........................13 Using the Metronome ..............................................14 Changing the Touch Sensitivity ...............................15 Adding Variations to the Sound (Reverb) ................15 Transposing the Pitch in semitones ........................16 Fine tuning the Pitch................................................16 Setting the Scale Tuning .........................................17 Playing Back Songs .................................................. 18 Songs compatible with this instrument ....................18 Playing back Songs .................................................19 Accessories Owner’s Manual “50 greats for the Piano” (Music Book) AC Power Cord Felt Key Cover Felt Strips x 3 Bench* My Yamaha Product User Registration** Recording Your Performance................................... 21 Using USB Flash Memory ......................................... 23 Connecting USB flash memory ...............................23 Formatting USB flash memory ................................24 Copying User Songs in the instrument to a USB flash memory ...........................................................24 Deleting a Song file .................................................25 Backup data and Initializing ..................................... 26 Backup data in internal memory ..............................26 Initializing the Backup data......................................26 * Included or optional depending on locale. ** The PRODUCT ID on the sheet will be needed when you fill out the User Registration form Online Materials In addition to this manual, the following instructional materials are available. MIDI Reference This contains the MIDI Data Format, the MIDI Implementation chart and detailed explanations about the MIDI settings of the instrument. MIDI Basics (only in English, French, German and Spanish) If you want to know more about MIDI and how to use it, refer to this introductory book. Computer-related Operations Includes instructions on connecting this instrument to a computer, and operations related to transferring song data. To obtain these manuals, access the Yamaha Manual Library, enter “NU1” or “MIDI Basics” to the Model Name box, then click [SEARCH]. Yamaha Manual Library http://www.yamaha.co.jp/manual/ NU1 Owner’s Manual 5 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, shortcircuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord Water warning • Do not place the power cord near heat sources such as heaters or radiators. Also, do not excessively bend or otherwise damage the cord, or place heavy objects on it. • Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. • Use only the supplied power cord/plug. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. • Do not expose the instrument to rain, use it near water or in damp or wet conditions, place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. • Never insert or remove an electric plug with wet hands. Fire warning • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. Do not open • This instrument contains no user-serviceable parts. Do not open the instrument or attempt to disassemble or modify the internal components in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. If you notice any abnormality • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel. • The power cord or plug becomes frayed or damaged. • It emits unusual smells or smoke. • Some object has been dropped into the instrument. • There is a sudden loss of sound during use of the instrument. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/Power cord Connections • Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. • When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. Assembly Handling caution • Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury. Location • Do not place the instrument in an unstable position where it might accidentally fall over. • When transporting or moving the instrument, always use two or more people. Attempting to lift the instrument by yourself may damage your back, result in other injury, or cause damage to the instrument itself. • Before moving the instrument, remove all connected cables, to prevent damage to the cables or injury to anyone who might trip over them. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. • Though the wooden parts of this instrument have been designed and produced with care concerning the environment and human health, in some rare instances customers may sense an unusual odor or develop irritation in the eyes, due to the coating material and adhesive. To avoid this, we recommend that you observe the following: 1. Specially ventilate the room for several days after unpacking and installing this instrument, since it has been packed in airtight conditions in order to maintain quality during transportation. 2. If the room housing the instrument is small, continue to ventilate it normally, either daily or periodically. 3. If you have left the instrument in a closed room for a long time under high temperature, ventilate the room, then lower the temperature if possible, before using the instrument. DMI-5 6 NU1 Owner’s Manual • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. • Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. • Do not insert a finger or hand in any gaps on the fallboard or instrument. Also take care that the fallboard does not pinch your finger. • Never insert or drop paper, metallic, or other objects into the gaps on the fallboard, panel or keyboard. This could cause physical injury to you or others, damage to the instrument or other property, or operational failure. • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. Using the bench (If included) • Do not place the bench in an unstable position where it might accidentally fall over. • Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or for any other purpose might result in accident or injury. • Only one person should sit on the bench at a time, in order to prevent the possibility of accident or injury. • If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool. • Keep special watch over any small children so that they don’t fall off the rear of the bench. Since the bench does not have a backrest, unsupervised use may result in accident or injury. 1/2 Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. NOTICE To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices below.  Handling and Maintenance • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. • Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.) • Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • Bumping the surface of the instrument with metal, porcelain, or other hard objects can cause the finish to crack or peel. Use caution. • Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch the instrument's finish. • During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth.  Saving data • To protect against data loss through media damage, we recommend that you save your important data onto two USB flash memories. Information  About copyrights • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others' copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.  About functions/data bundled with the instrument • Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.  About this manual • The illustrations and displays as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. Transporting / Installing If you move to another location, transport the instrument horizontally. Do not subject the instrument to excessive vibration or shock. Do not hold here. Rear handgrip CAUTION When moving the instrument, always hold the bottom of the keyboard unit and the handgrips of the rear side. Be sure not to hold the headphone jack box. Improper handling can result in damage to the instrument or personal injury. Rear handgrip Do not hold here. Place the instrument away from the wall by at least 10 cm to optimize and enhance the sound effect. If you find the instrument shaky or unstable after installing, insert the included felt strips. For details, refer to the instructions supplied with the felt strips. DMI-5 2/2 NU1 Owner’s Manual 7 Introduction Panel Controls and Terminals Overview Music Rest (pages 9 and 10) Power switch (page 10) Control panel (see below) Fallboard (pages 9 and 10) [MASTER VOLUME] control (page 10) Front surface Terminals (page 27) [USB TO DEVICE] terminal (page 23) [PHONES] jacks (page 12) Rear surface [AC IN] jack (page 9) Pedals (page 11) Adjuster (should be rotated until it comes in firm contact with the floor surface) Control Panel q Display ................................................................See below. w [DEMO/SONG] button............................................. page 13 q e [REVERB] button .................................................... page 15 r [METRONOME] button ........................................... page 14 w t e y r u t [PIANO/VOICE] button............................................ page 13 i y [FUNCTION] button .............................pages 16, 17 and 29 u [RECORD] button ................................................... page 22 o i [+]/[-] button o [PLAY/STOP] button...................................pages 19 and 22 Display Indicates various values such as Song number and Parameter value. Note that the display turns dark after the value is set. d.01 Song number 5 Parameter value This display also indicates various messages with the three characters. For details, refer to page 30. 8 NU1 Owner’s Manual Playing the Keyboard 1 Set up the power supply. 1-1 On the bottom surface (page 8), insert the power cord plug into the [AC IN] connector. AC IN AC IN connector WARNING Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used. (The voltage rating appears on the name plate on the bottom panel). Connecting the unit to an inappropriate AC supply can seriously damage the internal circuitry and may even pose a shock hazard! 1-2 Insert the plug on the other end of the power cord to a standard AC outlet. WARNING • Use only the AC power cord supplied with the instrument. If the supplied power cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! • The type of AC power cord provided with the instrument may be different depending on the country in which the instrument was purchased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.) Do NOT modify the plug provided with the instrument. If the plug does not fit the outlet, have a proper outlet installed by a qualified electrician. 2 The shape of the plug differs depending on your locale. With both hands, hold the hand grip, then lift and open the fallboard. CAUTION • Hold the fallboard with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to avoid catching fingers (yours or others, especially children’s) between the fallboard and the unit. CAUTION Be careful to avoid catching your fingers between the fallboard and the instrument. 3 Fold down the top of the fallboard, then open the music rest and put the score on it. NU1 Owner’s Manual 9 Playing the Keyboard 4 On the right of the keyboard, press the [ ] switch to turn on the power. The lamp located as shown below lights up, the display (page 8) indicates “nU1” for a while, then the instrument starts up. MASTER VOLUME Power switch MIN MAX The lamp lights up. NOTICE Do not press any keys until the instrument has completely started up (approx. four seconds after turning on the switch). Doing so may cause some keys to not sound normally. 5 Play the keyboard. To adjust the volume: Use the [MASTER VOLUME] control (page 8) located at the front left, just below the keyboard. MASTER VOLUME The level decreases. The level increases. MIN MAX USB TO CAUTION Avoid using this instrument at a high volume level for a long period of time, to prevent hearing damage. 6 Press the [ ] switch again to turn off the power. The power lamp turns off. CAUTION A small amount of electrical current remains even after the power switch is turned off. If you plan not to use the instrument for a long period of time, be sure to unplug the instrument from the AC outlet. 7 Close the music rest. If you omit this operation and close the fallboard, the music rest will hit the keyboard and may result in damage. 8 With both hands, open the folded top of the fallboard, and close it gently. CAUTION Be careful to avoid catching your fingers between the fallboard and the instrument. 10 NU1 Owner’s Manual Playing the Keyboard Using the Pedals The instrument has three pedals that produce a range of expressive effects similar to those produced by the pedals on an acoustic piano. Damper Pedal (Right) Pressing this pedal will sustain notes longer. Releasing this pedal immediately stops (damps) any sustained notes. A “half-pedal” function of this pedal creates partial sustain effects, depending on how far down you press the pedal.  Half-pedal function This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you press the pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a bit murky and loud with too much sustain, you can release the pedal half way to subdue the sustain (murkiness). If you press and hold the damper pedal here, all the notes shown will be sustained.  To set the Half Pedal Point: While holding down [PIANO/VOICE], press one of the A#5–E6 keys. This operation sets the degree to which pressing the damper pedal applies the half-pedal effect. The smaller the value, the shallower the half-pedal point. The larger the value, the deeper the half-pedal point. A#5 E6 Setting range: -2 (A#5) – 0 (C6) – 4 (E6) Default Setting: 0 GP Responsive Damper Pedal This special pedal has been designed to provide enhanced tactile response and, when pressed, is much closer in feel to the pedal of an actual grand piano. It makes it easier to physically experience the half-pedal point and more easily apply the half-pedal effect than other pedals. Sostenuto Pedal (Center) Pressing this pedal while holding the notes will sustain the pressed notes (as if the damper pedal had been pressed), but all subsequently played notes will not be sustained. This makes it possible to sustain a chord, for example, while the other notes are played “staccato.” Soft Pedal (Left) If you press and hold the sostenuto pedal here, only the notes held at this timing will be sustained. Pressing this pedal will reduce the volume and slightly change the timbre of the notes. The notes played before this pedal is pressed are not affected. NU1 Owner’s Manual 11 Playing the Keyboard Using Headphones (Optional) Since this instrument is equipped with two [PHONES] jacks, you can connect two sets of standard stereo headphones. If you are using only one set of headphones, insert a plug into either jack, shutting off the speakers. MASTER VOLUME MIN MAX USB TO DEVICE CAUTION Avoid listening to the instrument at a high volume level through headphones for a long period of time, to prevent hearing damage. PHONES Standard stereo phone plug I.A. Control (Intelligent Acoustic Control) This function automatically adjusts and controls the sound quality according to the overall volume of the instrument. Even when the volume is low, it permits both low sounds and high sounds to be clearly heard. Note that the I.A. Control is effective only from the sound output of the instrument speakers.  To turn on/off the I.A. Control: While holding down [FUNCTION], press the C0 key repeatedly (as necessary). Default setting: On  To adjust the I.A. Control Depth: While holding down [FUNCTION], press one of the keys between A0–D#1. D#1 (3) C0 A0 C1 (-3) (0) Setting range: -3 (A0) – 0 (C1) – 3 (D#1) Default setting: 0 (C1) The higher the value, the more clearly that low and high sounds are heard at lower volume levels. 12 NU1 Owner’s Manual Advanced Functions Basic Operations and More Selecting a Voice  To select the Grand Piano 1 Voice: Simply press [PIANO/VOICE].  To select a different Voice: While holding down [PIANO/VOICE], press [+] or [-]. Voice List Display Voice name Descriptions 1 Grand Piano 1 Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano. 2 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music 3 E.Piano 1 Created by FM synthesis. Good for popular music. 4 E.Piano 2 Simulates the sound of hammer-struck metallic “tines.” Soft tone when played lightly, and an aggressive tone when played hard. 5 Harpsichord The definitive instrument for baroque music. Since the strings of an actual harpsichord are plucked, there is no touch response. Listening to the Voice Demo Songs Demo Songs effectively demonstrate each of this instrument’s Voices. 1 2 Select the Voice for the Demo Song that you want to listen to. The Demo Song for the Voice selected in Step 1 starts. NOTE You can play the keyboard along with the demo song. To change the Demo Song during playback: Press [+] or [-]. NOTE No MIDI data will be output during Voice Demo playback. Press [DEMO/SONG]. To adjust the playback tempo: While holding down [METRONOME], press TEMPO [+] or [-]. 3 Press [DEMO/SONG] again to stop playback. Demo Song List Display Voice Name Title Composer Prélude, Suite bergamasque C. A. Debussy Grand Piano 2 — — E.Piano 1 — — d.04 E.Piano 2 — — d.05 Harpsichord Concerto a cembalo obbligato, 2 violini, viola e continuo No.7, BWV.1058 J. S. Bach d.01 Grand Piano 1 d.02 d.03 The d.01 and d.05 Songs are re-arranged excerpts from the original compositions. The other Demo Songs are Yamaha’s original pieces (©2012 Yamaha Corporation). NU1 Owner’s Manual 13 Basic Operations and More Using the Metronome The metronome feature is convenient for practicing with an accurate tempo. 1 Press [METRONOME] to start the metronome. While the metronome sounds, a dot at the right side of the LED display and the lamp of the metronome button flash on and off to the tempo. 120. 2 The beat lamp flashes at the current tempo Press [METRONOME] again to stop the metronome. Adjusting the Tempo During the operation described below, you can check the tempo value shown on the display.  To increase or decrease the value by 1: While holding down [METRONOME], press [+] (or C#5 key) or [-] (or B4 key). During playback, simply press [+] or [-].  To increase or decrease the value by 10: Setting range: 5 to 500 beats per minute Default setting: 120 NOTE The metronome tempo is restored to the default setting when the power is turned off. While holding down [METRONOME], press the D5 or A#4 key.  To reset the value to the default (120): While holding down [METRONOME], press the C5 key or press [+] and [-] simultaneously. During playback, press both [+] and [-] simultaneously. A#4 C#5 B4 C5 D5 Selecting the Beat While holding down [METRONOME], press one of the C3–F3 keys. The selected value is shown on the display while both controls are held. Default setting: 0 (No downbeat) 0 Beat C3 NOTE The Beat of the metronome is restored to the default setting when the power is turned off. F3 Display Key Beat Display Key Beat 0 C3 0 (no downbeat) 4 D#3 4 2 C#3 2 5 E3 5 3 D3 3 6 F3 6 Only the first beat is accented with a bell sound when set to a value other than 0. Adjusting the Metronome volume While holding down [METRONOME], press one of the C1–G2 keys to set the volume. The specified value is shown on the display while both controls are held. min. max. C1 (1) D2 (15) G2 (20) The volume level increases as you press higher keys 14 NU1 Owner’s Manual Setting range: 1–20 Default setting: 15 NOTE The metronome volume setting is retained even when the power is turned off. Basic Operations and More Changing the Touch Sensitivity You can specify the Touch Sensitivity (how the sound responds to the way you play the keys). While holding down [PIANO/VOICE], press one of the A6–C7 keys. The selected Touch Sensitivity is shown on the display while both controls are held. A6 C7 Display Key Touch Sensitivity Descriptions OFF A6 Fixed The volume level does not change at all regardless of whether you play the keyboard soft or hard. 1 A#6 Soft The volume level does not change much when you play the keyboard soft or hard. 2 B6 Medium This is the standard piano touch response. 3 C7 Hard The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic and dramatic expression. You have to hit the keys hard to produce a loud sound. Default setting: 2 (Medium) NOTE The touch type is restored to the default setting when the power is turned off. NOTE This setting does not change the weight of the keyboard, but only the response. Adding Variations to the Sound (Reverb) The Reverb effect reproduces the realistic acoustic ambience of grand piano. To turn on or off the Reverb: Press [REVERB] repeatedly (as necessary). Lights up when REVERB is on. To adjust the Reverb Depth: While holding down [REVERB], press [+] or [-]. The current value is shown on the display while both controls are held. Setting range: 1–20 Default setting: 2 NOTE The Reverb Depth is restored to the default setting when the power is turned off. NOTE Holding [REVERB] shows the Reverb Depth value on the display. To restore the default value (2), press [+] and [-] simultaneously while holding [REVERB]. NU1 Owner’s Manual 15 Basic Operations and More Transposing the Pitch in semitones You can shift the pitch of the entire keyboard up or down in semitones to facilitate playing in difficult key signatures and match the pitch of the keyboard to the range of a singer or other instruments. For example, if “+5” is selected, playing the key C produces a pitch of F, letting you play a song of F major as though it were in C major.  To transpose the pitch down: While holding down [FUNCTION], press a key between F#2 (-6) and B2 (-1).  To transpose the pitch up: While holding down [FUNCTION], press a key between C#3 (+1) and F#3 (+6). Default setting: 0 (Normal pitch) Setting range: -6 – 6 NOTE The Transpose value is restored to the default setting when the power is turned off.  To restore the original pitch: While holding down [FUNCTION], press the C3 key. F#2 F#3 C3 -6 -4 -2 +1 +3 +6 -5 -3 -1 0 +2 +4+5 Transpose down. Transpose up. Normal pitch The specified value is shown on the display. Fine tuning the Pitch You can fine-tune the pitch of the entire instrument. This function is useful when you play this instrument along with other instruments or recorded music. During the operation described below, you can check the Pitch value shown on the display.  To tune up (in roughly 0.2Hz steps): While holding down [FUNCTION], press [+]. Holding down both buttons shows the current pitch setting (Hz). 42.0 Example: 442Hz  To tune down (in roughly 0.2Hz steps): While holding down [FUNCTION], press [-]. Holding down both buttons shows the current pitch setting (Hz).  To restore standard pitch: While holding down [FUNCTION], press [+] and [-] simultaneously. Holding down all three buttons shows the current pitch setting (Hz). 16 NU1 Owner’s Manual NOTE The tuning value is retained even when the power is turned off. Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Setting range: 414.8–466.8Hz (=A3) Default setting: 440.0Hz (=A3) Basic Operations and More Setting the Scale Tuning You can select various scales for the instrument. Equal Temperament is the most common contemporary piano tuning scale. However, history has known numerous other scales, many of which serve as the basis for certain genres of music. This feature lets you experience the tunings of these genres. Selecting a Scale While holding down [FUNCTION], press one of the C5–F#5 keys. Holding down both controls shows the current value on the display. F#5 Default setting: 1 (Equal) NOTE The scale is restored to the default setting when the power is turned off. C5 Display Key Scale Description The pitch range of each octave is divided equally into twelve parts, with each half-step evenly spaced in pitch. This is the most commonly used tuning in music today. 1 C5 Equal 2 C#5 Pure Major 3 D5 Pure Minor 4 D#5 Pythagorean This scale was devised by the famous Greek philosopher and is created from a series of perfect fifths, which are collapsed into a single octave. The 3rd in this tuning are slightly unstable, but the 4th and 5th are beautiful and suitable for some leads. 5 E5 Mean-Tone This scale was created as an improvement on the Pythagorean scale, by making the major third interval more “in tune.” It was especially popular from the 16th century to the 18th century. Handel, among others, used this scale. 6 F5 Werckmeister 7 F#5 Kirnberger These tunings preserve the pure mathematical intervals of each scale, especially for triad chords (root, third, fifth). You can hear this best in actual vocal harmonies — such as choirs and a cappella singing. This composite scale combines the Werckmeister and Kirnberger systems, which were themselves improvements on the mean-tone and Pythagorean scales. The main feature of this scale is that each key has its own unique character. The scale was used extensively during the time of Bach and Beethoven, and even now it is often used when performing period music on the harpsichord. Selecting the Base Note While holding down [FUNCTION], press one of the C4–B4 keys. Holding down both controls shows the current value on the display. C4 Default setting: C NOTE The base note is restored to the default setting when the power is turned off. B4 Key Base Note Key Base Note Key Base Note Key C4 C D#4 Eb F#4 F# A4 Base Note A C#4 C# E4 E G4 G A#4 Bb D4 D F4 F G#4 Ab B4 B Example: F~ F# (Followed by a high bar if sharp) G G A_ Ab (Followed by a low bar if flat) NU1 Owner’s Manual 17 Playing Back Songs This instrument can play back Songs contained in internal memory or USB memory connected to the [USB TO DEVICE] terminal. There are two kinds of Songs that can be played back: MIDI Songs and Audio Songs. MIDI Songs and Audio Songs A MIDI Song contains data of your keyboard performance (such as which keys you played and how hard you played them), and is not a recording of the actual sound itself. The performance information refers to which keys are played, at what timing, and at what strength—just as in a musical score. Based on the recorded performance information, the tone generator (of the digital piano, etc.) outputs the corresponding sound. A MIDI Song uses a small amount of data capacity in comparison to audio recording. An Audio Song is a recording of the performed sound itself. This data is recorded in the same way as that used in recording cassette tapes, or with voice recorders, etc. This data can be played with a portable music player, etc., allowing you to easily let other people hear your performance. Songs compatible with this instrument Song Category List Song Category Song Number Descriptions d.xx Voice Demo Song (MIDI Song) d.01–d.05 Each Song effectively demonstrates each of this instrument’s Voices. P.xx Preset Song (MIDI Song) P.01–P.50 50 Piano Preset Songs in the instrument. These correspond to the scores in the book “50 greats for the Piano,” included for your convenience and enjoyment. A.00–A.99 A.xx* Audio Song in USB flash memory User Songs which have been recorded with this instrument (page 24) C.00–C.99** External Songs, commercially available or which have been recorded on a computer, etc. S.00–S.99 User Songs which have been recorded with this instrument (page 24) F.00–F.99** External Songs, commercially available or which have been recorded on a computer, etc. U.01–U.10 User Songs which have been recorded to the instrument (page 21) L.00–L.99** External Songs (commercially available or which have been recorded on a computer, etc.) transferred from a computer to this instrument. S.xx* U.xx MIDI Song in USB flash memory MIDI Song in this instrument * Shown only when USB flash memory is connected. ** When data does not exist, the song number is not displayed. Song data formats that can be played  SMF (Standard MIDI File) Formats 0 and 1 One of the most common and widely compatible MIDI formats used for storing sequence data. MIDI Songs recorded in this instrument are saved as SMF Format 0.  WAV format (.wav) Audio file format commonly used by computers. This instrument can play 44.1kHz/ 16bit stereo WAV files. Audio Songs recorded on this instrument are saved in this format. 18 NU1 Owner’s Manual User Songs and External Songs Songs recorded by this instrument are called “User Songs” while Songs created in other ways or on other instruments are called “External Songs.” In USB flash memory, Songs in the USER FILES folder are handled as User Songs while Songs in a location other than the USER FILES folder are handled as External Songs. When you record a Song to USB flash memory, a USER FILES folder is created automatically and the resulting User Song will be saved in this folder. NOTE [xx] indicates numerals. Playing Back Songs Playing back Songs To play back a Song on a USB flash memory: Read “Connecting USB flash memory” (page 23), then connect the USB flash memory to the [USB TO DEVICE] terminal, and follow the instructions below. 1 While holding down [DEMO/SONG], press [+] or [-] until the desired Song Category (page 18) appears on the display. The Song Categories will appear on the display in the following order: P.xx  (A.xx)  (S.xx)  U.xx  d.xx  P.xx  etc. If you wish to play back a “C.xx,” “F.xx,” or “L.xx” song, select the Song Category “A.xx,” “S.xx,” or “U.xx.” 2 Press [+] or [-] to select the desired Song number, or “*.rd” (random) or “*.AL”(all). To select “C.xx,” “F.xx,” or “L.xx,” continue holding down [+] until they appear, or press [-] repeatedly. “C.xx” will appear after “A.99,” “F.xx” will appear after “S.99,” and “L.xx” will appear after “U.10” on the display. (When data does not NOTE “A.xx” and “S.xx” are shown only when USB flash memory is connected. NOTE Song indications such as “F.00” and “C.00” may not appear immediately depending on the amount of the folders in the USB flash memory. NOTE The metronome can be used during playback. It will automatically stop when playback is stopped. exist, the song number is not displayed.)  When a specific Song number (such as P.01 and U.01) is selected: Only the selected Song will be played back.  When “*.rd” or “*.AL” is selected: *.rd ........ Plays back the Songs of this type continuously in random order. *.AL ........ Plays back all the Songs of this type continuously in sequential order. The asterisk (*) indicates “P,”“A,”“S,” or “U” designations in the display. For details, refer to page 18. 3 Press [PLAY/STOP] to start playback. During playback, the current measure number (in the case of MIDI Songs) or playing time (in the case of Audio Songs) is shown on the display. MIDI Song 1. Current measure number Audio Song 2. 0.01. 0.02. Playing time Indicates minutes. In Indicates case of 10 minutes or seconds. more, only the lowest digit is shown. Adjusting the tempo (only for MIDI Songs) While holding down [METRONOME], press [+] or [-] to adjust the tempo. To reset the tempo to default, press [+] and [-] simultaneously while holding down [METRONOME]. For details, refer to page 14. Adjusting the volume (only for Audio Songs) The volume level of this instrument may be markedly different from that of a commercially available Audio Song or one recorded on another device. To adjust the volume of the Audio Song, hold down [DEMO/SONG] and press one of the C1–G2 keys. min. NOTE When playing back MIDI Songs containing Voices that are incompatible with this instrument such as XG and GM Songs, the Voices may not sound as intended on the original. In addition, Song data of the MIDI channels 3 – 16 cannot be played back because this instrument can recognize only the MIDI channels 1 and 2. This is why you should only play back Songs which have data of only MIDI channels 1 – 2, to which the piano performance is assigned. NOTE You can play the keyboard along with Song playback. You can also change the Voice for your keyboard performance. Setting range: 1 – 20 Default setting: 16 max. C1 (1) A1 (10) G2 (20) The higher the key, the greater the volume. Rewind/Fast forward During playback, press [-] or [+] to move back or forth through the measures. Returning to the Song Top During playback, press [-] and [+] simultaneously to jump to the top of the Song. NU1 Owner’s Manual 19 Playing Back Songs 4 Press [PLAY/STOP] again to stop playback. If a specific Song number is selected in Step 2, playback stops automatically by reaching the end of the Song. Setting the Character Code If the Song cannot be called up, you may need to select the appropriate Character Code from the following two settings.  International For playing back Songs with names using western European characters (including umlaut or diacritic marks). To select this, turn on the power while holding down the A-1 and A#-1 keys. A-1 A#-1  Japanese For playing back Songs with names using Japanese characters. To select this, turn on the power while holding down the A-1 and B-1 keys. A-1 B-1 20 NU1 Owner’s Manual Setting range: JA (Japanese) / Int (International) Default setting: Int Recording Your Performance This instrument allows you to record your performance by using one of the following two methods. The recorded performance can be played back as a User Song.  MIDI recording With this method, your keyboard performances are recorded and saved to the instrument or USB flash memory as a MIDI Song (via the SMF format 0). Up to 10 Songs can be recorded to the instrument. although more can be recorded to USB flash memory (see below).  Audio recording With this method, your keyboard performances are recorded then saved to USB flash memory as an Audio Song in stereo WAV format of normal CD-quality resolution. The saved Audio Song can be transmitted to then played on portable music players. The recordable time differs depending on the capacity of the USB flash memory. When is USB flash memory necessary? MIDI Songs can be saved to internal memory of this instrument or to USB flash memory, while Audio Songs can only be saved to the USB flash memory. As necessary, prepare a USB flash memory referring to “Connecting USB flash memory” (page 23), then follow the instructions below. 1 2 Connect a USB flash memory to the [USB TO DEVICE] terminal. Select the Recording method.  To make a MIDI Recording: While holding down [DEMO/SONG], press [+] or [-] until “U.**” (for saving data to the instrument) or “S.**” (for saving data to the USB flash memory) is shown on the display.  To make an Audio Recording: While holding down [DEMO/SONG], press [+] or [-] until “A.**” (for saving data to the USB flash memory) is shown on the display. 3 Press [+] or [-] to select a Song number. • U.01–U.10 ......User Song in this instrument (MIDI Song) • S.00–S.99 ......User Song in USB flash memory (MIDI Song) • A.00–A.99 ......User Song in USB flash memory (Audio Song) NOTE Record mode cannot be called up in the following situations. • During Song playback (page 18) • During File operations (page 23) When skipping Steps 1 to 4 with an unrecordable Song selected: Pressing [RECORD] selects the lowest numbered Song (of those containing no data) as the Recording target. • If “C.**” is selected, pressing [RECORD] selects “A.**” (Audio Song in the USB flash memory). • If “F.**,” “L.**,” “P.**,” or “d.**” is selected, pressing [RECORD] selects “U.**” (MIDI Song in internal memory). If there is no empty User Song, “U.0.1”. will be as the Recording target.  When the selected Song contains already-recorded data: You can confirm it by checking the display. When Song contains data: U.0.1. Three dots light up. When Song does not contain data: U.01 Only the left-most dot lights up. NOTICE When the selected Song contains data, keep in mind that recording new data will erase the existing data. 4 Select a Voice (page 13) and other parameters such as Beat (page 14) and Reverb (page 15) for recording. Using the Metronome You can use the metronome while recording, although the metronome sound will not be recorded. NU1 Owner’s Manual 21 Recording Your Performance 5 Press [RECORD] to engage the Record mode. The [RECORD] lamp lights up, and the [PLAY/STOP] lamp flashes according to the current tempo. Lights up Flashes If memory space is running low: An “EnP” message will appear in the display after pressing [RECORD]. You can start recording, but the memory may become full during recording. We recommend that you first remove any unnecessary files (page 25) to ensure sufficient memory capacity. To exit from the Record mode, press [RECORD] again. 6 Start recording.  With MIDI Recording: Play a note on the keyboard or press [PLAY/STOP] to start recording. While recording, the current measure number is shown on the display. 1. 2. Measure number  With Audio Recording: Press [PLAY/STOP] to start recording. While recording, the elapsed time is shown on the display. 0.01. 0.02. Elapsed time Indicates minutes. In case of 10 minutes or more, only the lowest digit is shown. 7 Indicates seconds. Press [RECORD] or [PLAY/STOP] to stop recording. Dashes appear on the display in succession, indicating that the recorded data is being saved. After the data is saved, an “End” message appears for three seconds followed by the Song number, indicating that the Record mode is disengaged. NOTICE While dashes appear in the display in succession, never turn off the power or disconnect the USB flash memory. Doing so may delete all Song data in the instrument, including external Songs (page 18). 8 Press [PLAY/STOP] to hear the recorded Song. To stop playback, press [PLAY/STOP] again. Deleting a Song file If you want to delete the recorded Song, refer to page 25. 22 NU1 Owner’s Manual NOTE With audio recording, the sound input from the AUX IN jack is also recorded. Using USB Flash Memory This instrument features several functions which handle the Song files, as listed below.  Formatting USB flash memory  Copying a User MIDI file from the instrument to USB flash memory  Deleting Song file from the instrument or from USB flash memory NOTE File mode cannot be called up in the following situations. • During Song playback/pause (page 18) • Record mode (page 21) Connecting USB flash memory Precautions when using the [USB TO DEVICE] terminal This instrument features a built-in [USB TO DEVICE] terminal. When connecting a USB flash memory to the terminal, be sure to handle the USB flash memory with care. Follow the important precautions below. NOTE For more information about the handling of USB flash memory, refer to the owner’s manual of the USB flash memory.  Compatible USB flash memories The instrument does not necessarily support all commercially available USB flash memories. Yamaha cannot guarantee operation of USB flash memories that you purchase. Before purchasing a USB flash memory for use with this instrument, please visit the following web page: http://download.yamaha.com/ NOTE Other USB devices such as a computer keyboard or mouse cannot be used.  Connecting USB flash memory When connecting a USB flash memory to the [USB TO DEVICE] terminal, make sure that the connector on the device is appropriate and that it is connected in the proper direction. MASTER VOLUME MIN MAX USB TO DEVICE PHONES NOTICE • When connecting a USB cable, make sure it is less than 3 meters. • Though the instrument supports the USB 1.1 standard, you can connect and use a USB 2.0 storage device with the instrument. However, note that the transfer speed is that of USB 1.1. Using USB Flash Memory By connecting the instrument to USB flash memory, you can save data you’ve created to the connected USB flash memory, as well as read data from it.  Number of USB flash memories which can be used Only one USB flash memory can be connected to the [USB TO DEVICE] terminal.  Formatting USB flash memory When accessing USB flash memory, a message may appear prompting you to format the device/media. If so, execute the Format operation (page 24). NOTICE The format operation overwrites any previously existing data. Make sure that the media you are formatting does not contain important data.  To protect your data (write-protect) To prevent important data from being inadvertently erased, apply the write-protect provided with the USB flash memory. If you are saving data to the USB flash memory, make sure to disable write-protect.  Connecting/removing USB flash memory Before removing the USB flash memory from the [USB TO DEVICE] terminal, make sure that the instrument is not accessing data (such as in the Save, Copy and Delete operations). NOTICE Avoid frequently connecting/disconnecting the USB flash memory too often. Doing so may result in the operation of the instrument “freezing” or hanging up. While the instrument is accessing data (such as during Save, Copy, Delete, Load and Format operations) or is mounting the USB flash memory (shortly after the connection), do NOT unplug the USB connector. Doing so may corrupt the data on either or both devices. NU1 Owner’s Manual 23 Using USB Flash Memory Formatting USB flash memory NOTICE Executing the Format operation will delete all data in the USB flash memory. Before formatting, save important data to a computer or another storage device. 1 2 Connect the USB flash memory to the [USB TO DEVICE] terminal. While holding [FUNCTION] and [PLAY/STOP], press [RECORD]. “For” appears on the display for a while, then “n Y” appears. If you wish to cancel this operation, press [-] at this timing. 3 Press [+] to execute the Format operation. NOTE When you execute a Song Recording (page 22), Copy (below) or Delete (page 25) operation, a “UnF” prompt may appear in the display, indicating that the USB flash memory has not been formatted yet. In this case, execute the Format operation by proceeding from Step 2 as described at left. Dashes appear in succession on the display, indicating that Formatting is in process. When the operation is completed, “End” appears on the display. NOTICE While dashes appear in succession on the display, never turn off the power or disconnect the USB flash memory. Copying User Songs in the instrument to a USB flash memory You can copy the User Song in the instrument to the USB flash memory. The copied Song is saved as SMF format 0 to the “USER FILES” folder in the USB flash memory, and the file is automatically named as “USERSONG**.MID” (**: numerals). 1 Connect the USB flash memory to the [USB TO DEVICE] terminal. 2 For the Copy source, select a User Song in this instrument. For detailed instructions, refer to page 18. 3 While holding [FUNCTION], press [PLAY/STOP]. On the display, “SAu” appears for a while then the Song number (for example “S.00”) appears as Copy destination. SAu S.00 (Example: “S.00”) Song number To cancel the Copy operation before it begins, press any button other than [PLAY/STOP] here. 4 Press [PLAY/STOP] to execute the Copy operation. Dashes appears in succession on the display, indicating that the Copy operation is in process. When the Copy is completed, “End” appears on the display. NOTICE When dashes appear in the display in succession, never turn off the power or disconnect the USB flash memory. 24 NU1 Owner’s Manual NOTE If any Song other than one of the User Songs is selected in Step 2, “E01” appears in Step 3. In this case, return back to Step 2. NOTE When there is insufficient free memory capacity in the USB flash memory, the copied Song cannot be saved. To ensure sufficient memory, try erasing unnecessary files (page 25). Using USB Flash Memory Deleting a Song file A User Song can be deleted. 1 If necessary, connect the USB flash memory to the [USB TO DEVICE] terminal. 2 Select the Song to be deleted. NOTE Song Playback is not available after executing Step 3. Make sure to confirm the to-bedeleted Song before executing Step 3. For details on how to select a Song file, refer to page 19. 3 While holding down [FUNCTION], press [RECORD]. “dEL” appears on the display for a while, then “n Y” appears on the display. If you wish to cancel this operation, press [-]. 4 Press [+] to execute the Delete operation. Dashes appear in succession on the display, indicating that the Delete is being executed. When the operation is completed, “End” appears on the display. NOTE The operation here does not apply to Songs transferred from the computer to this instrument’s internal memory. If you want to delete such a Song, use a computer. NOTICE While dashes appear in succession on the display, never turn off the power or disconnect the USB flash memory. NU1 Owner’s Manual 25 Backup data and Initializing Backup data in internal memory The following data, referred to as Backup data, as well as User Song data and External Song data will be maintained even if the power is turned off. • Character Code ........................................page 20 • Tuning......................................................page 16 • I.A. Control on/off ..................................page 12 • I.A. Control Depth...................................page 12 • Half Pedal point.......................................page 11 • Metronome volume .................................page 14 • Audio Song volume.................................page 19 • AUX IN Noise Gate on/off......................page 28 Initializing the Backup data While holding down the C7 key, turn on the power. “CLr” appears on the display, then the Backup data (with the exception of “Character Code”) will be initialized. Note that User Songs and External Songs are not erased. C7 NOTICE Do not turn off the power to this instrument while it is initializing the data in its internal memory (while “CLr” is displayed). 26 NU1 Owner’s Manual NOTE If this instrument somehow becomes disabled or malfunctions, turn off the power to the instrument, then perform the initialization procedure. Connections CAUTION Before connecting the instrument to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may result. Terminals q w e r t USB TO DEVICE Refer to the “Panel Controls and Terminals” on page 8 for information on the location of the connectors. q USB [TO HOST] terminal By connecting a computer to this terminal, you can transfer Song data between the instrument and the computer via MIDI, and take advantage of sophisticated computer music software. For details, refer to the “Computer-related Operations” document. (Left side of the front surface below the keyboard) NOTE Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used. w MIDI IN / OUT terminal These terminals allow you to connect this instrument to another MIDI instrument. For details, refer to “About MIDI” on page 29. e AUX IN [L/L+R] [R] jack By connecting the stereo cables to these jacks, the sound of another audio equipment can be reproduced via the speakers of this instrument. NOTE Use only the AUX IN [L/L+R] jack for connection with a mono device. CAUTION When the AUX IN jacks are connected to an external device, first turn on the power to the external device, then to the instrument. Reverse this order when you turn the power off. Instrument Keyboard or another audio equipment AUX IN AUX OUT Phone plug (standard) Phone plug (standard) Audio cable AUX IN OUTPUT Phone plug (standard) Stereo phone plug (standard) Audio cable NU1 Owner’s Manual 27 Connections  Minimizing noise of the input sound via Noise Gate By default, this instrument cuts unwanted noise from the input sound. However, this may result in wanted sounds also being cut, such as the soft decay sound of the piano. To avoid this, set the Noise Gate to off via the following operation. Default setting: ON While holding down [FUNCTION], press the C#6 key repeatedly to toggle Noise Gate on and off as needed. C#6 r AUX OUT [L/L+R] [R] jacks These jacks let you connect the instrument to external powered speaker systems, for playing in larger venues at higher volumes. Instrument Powered speaker AUX OUT AUX IN Phone plug (standard) Phone plug (standard) Audio cable CAUTION When the AUX OUT jacks are connected to an external device, first turn on the power to the instrument, then to the external device. Reverse this order when you turn the power off. Also, before turning the power on or off to all components, set all volume levels to minimum (0). NOTICE When the AUX OUT jacks are connected to an external device, never connect the [AUX IN] jacks to the output jacks of the external device. Doing so could result in feedback (oscillation) that may damage both the devices. t [USB TO DEVICE] terminal This terminal allows connection to USB flash memory. Refer to “Connecting USB flash memory” on page 23 for more information. 28 NU1 Owner’s Manual NOTE Use audio cables and adaptor plugs with no resistance. NOTE Use only the AUX OUT [L/L+R] jacks for connection with a mono device. About MIDI MIDI (Musical Instrument Digital Interface) is a global format standard for performance data transmission and reception between electronic musical instruments. Connecting musical instruments that support MIDI via MIDI cables enables you to transfer performance and setting data between multiple musical instruments. Using MIDI, you can also achieve more advanced performances than using just a single musical instrument. Receives MIDI data. Transmits MIDI data. NOTE You need a dedicated MIDI cable (optional) to make a MIDI connection. NOTE The handled MIDI messages differ depending on the MIDI instrument. It means that some MIDI messages transmitted from this instrument may not be recognized by the separate MIDI instrument. This is why you should check the MIDI Implementation Chart of each MIDI instrument. The MIDI Implementation Chart of this instrument is described in the MIDI Reference. NOTE During Song playback, data of only MIDI channels 3 – 16 will be output via MIDI. Example for MIDI connection Example 1: The connection below allows you to play the sounds of an external MIDI tone generator from the keyboard of this instrument. MIDI tone generator MIDI OUT Performance data MIDI IN NU1 Set the MIDI Receive Channel of the external MIDI tone generator to “1,” since the MIDI Transmit Channel of this instrument is set to “1.” Example 2: The connection below allows you to play the sounds of this instrument by playing back a Song on an external sequencer. Sequencer MIDI IN Song data MIDI OUT NU1 The MIDI Receive Channels of this instrument can only be set to 1 and 2. This is why the data for the piano part should be assigned to MIDI Channels 1 and 2 of the Song. Local Control on/off Normally, playing the keyboard will control the internal tone generator. This situation is called “Local Control ON.” If you want to use the keyboard only for controlling an external MIDI instrument, turn off Local Control. With this setting, this instrument will produce no sound even if you play the keyboard.  To turn the Local Control ON or OFF: While holding down [FUNCTION], press the C6 key repeatedly (as necessary). Default setting: ON C6 NU1 Owner’s Manual 29 Appendix Message List Message Descriptions CLr Initializing to the default settings. con Displayed when Musicsoft Downloader is started on a computer connected to the instrument. When this message appears, you cannot operate the instrument. Displayed when the character code (page 20) is not appropriate for the file name of the Song which you are selecting. Switch the character code. E01 Displayed when the data format is not compatible with this instrument, or the data has some other problems. This Song cannot be selected. Displayed when no USB flash memory can be found, or a problem has occurred in the USB flash memory. Disconnect and connect the device again, then execute the operation. If this message appears repeatedly even when there aren't any other likely problems, the USB flash memory may be damaged. E02 Indicates that the USB flash memory is protected. E03 Displayed when the memory of the USB flash memory becomes full, or the number of files and folders exceeds the system limit. E04 Displayed when conversion to audio, Audio Song playback or recording has failed. If you are using a USB flash memory to which data has already been stored or deleted a number of times, first make sure that the device does not contain important data, then format it (page 24) and connect to the instrument again. EE1 A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor. EEE A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor. End Displayed when the current operation is completed. EnP The memory of the instrument or the USB flash memory is running out. We recommend that you remove any unnecessary files (page 25) to ensure sufficient memory capacity before start recording. FUL Since the memory of the instrument or the USB flash memory is insufficient, the operation could not be completed. If this message appears during recording, the performance data may not be recorded properly. n Y Confirms whether each operation is executed or not. Pro Displayed when you try to overwrite or delete a protected Song or read-only file. Use a read-only file after cancelling the read-only setting. UnF Displayed when an unformatted USB flash memory is connected. First make sure that the device does not contain important data, then format it (page 24). Uoc Communication with the USB flash memory has been shut down because of overcurrent to the USB flash memory. Disconnect the USB flash memory from the [USB TO DEVICE] terminal, then turn on the power of the instrument again. UU1 Communication with the USB flash memory has failed. Remove the USB flash memory and make the connection again. If the message appears even when the USB flash memory is connected properly, the USB flash memory may be damaged. UU2 This USB flash memory is not supported on this instrument, or too many USB flash memories may have been connected. Refer to “Connecting USB flash memory” (page 23) for information on the USB flash memory connection. * When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes. * Press any button to exit from these message displays. 30 NU1 Owner’s Manual Troubleshooting Problem Possible Cause and Solution The instrument does not turn on. The instrument has not been plugged in properly. Securely insert the female plug into the socket on the instrument, and the male plug into a proper AC outlet (page 9). Noise is heard from the speakers or headphones. The noise may be due to interference caused by the use of a mobile phone in close proximity to the instrument. Turn off the mobile phone, or use it further away from the instrument. A click or pop is heard when the power is turned on or off. Electrical current is being applied to the instrument. This is normal. The overall volume is low, or no sound is heard. • The Volume is set too low: set it to an appropriate level using the [MASTER VOLUME] control (page 10). • Make sure a pair of headphones is not connected to the headphones jack (page 12). • Make sure that Local Control (page 29) is on. The pitch and/or tone of the Piano Voices in certain ranges do not sound right. The Piano Voices attempt to precisely simulate actual piano sounds. However, as a result of sampling algorithms, overtones in some ranges may sound exaggerated, producing a somewhat different pitch or tone. This is normal, and no cause for concern. Sound is not heard on a particular key. Keyboard may not function normally if the key was pressed when the power was turned on. Turn off the power and turn it again to reset the function. Do not touch any keys when turning the power on (page 10). Sound input to the AUX IN jacks is interrupted. The output volume of the external device connected to this instrument is too low, resulting in the sound being cut off via the Noise Gate after it is input to this instrument. • Increase the output volume of the external device. The volume level reproduced via this instrument’s speakers can be adjusted by using the [MASTER VOLUME] control. • Set the Noise Gate to off (page 28). The USB flash memory has hung up (stopped). • Disconnect the USB flash memory and connect it to the instrument again. • The USB flash memory is not compatible with the instrument. Only use the USB flash memory whose compatibility has been confirmed by Yamaha (page 23). Mechanical noise is heard during performance. The keyboard mechanism of this instrument simulates the keyboard mechanism of an actual piano. Mechanical noise is also heard on a piano. When playing the same key repeatedly and quickly or playing a trill continuously for a long time, a sound louder than expected (considering your playing strength) might very occasionally occur. This might be caused by the mechanical structure of the keys and the action; this is normal, but only very seldom occurs. * The message list (page 30) is also provided for your reference. NU1 Owner’s Manual 31 Maintenance To keep your instrument in optimum condition, we recommend that you periodically follow the maintenance points below.  Instrument and Bench Maintenance When cleaning the instrument, use a soft, dry or slightly damp cloth. NOTICE Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch the instrument's finish.To keep the surface polished, apply commercially available piano polisher to a soft cloth and wipe the instrument’s surface with it. Then, polish it with a separate cloth. Before using any piano polisher, make sure to read the instructions for proper usage.  Keyboard Maintenance After wiping off the dirt with a slightly moistened soft cloth, wipe again with a dry cloth. For stubborn stains on the white keys, use a piano cleaner (sold separately). When using such a cleaner, be careful not to allow the cleaner to touch the black keys. After use, make sure to wipe with a dry cloth to remove any remaining piano cleaner.  Pedal Cleaning As with an acoustic piano, pedals may become tarnished over years of use. When this occurs, polish the pedal with a compound designed for piano pedals. Before using the compound, make sure to read the instructions for proper usage.  Tuning Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be useradjusted to match other instruments). This is because the pitch of digital instruments is always maintained perfectly. However, if you feel there is something abnormal concerning the keyboard touch, contact your Yamaha dealer. 32 NU1 Owner’s Manual Specifications Size/Weight Dimensions Width 1,501mm (59-1/8") Height 1,024mm (40-5/16") Depth Weight Number of Keys Keyboard Acrylic resin Black keys Phoenolic resin Number of Pedals Pedal Functions Damper (with half-pedal effect), Sostenuto, Soft Yes Music Rest Yes Piano Tone Generation Effects Yes Key-off Samples Yes Yes Number of Polyphony (Max.) 256 Preset Number of Voices Type Reverb Yes Number of Songs 10 Number of Tracks Data Capacity (max.) Playback Data Capacity (max.) Preset Number of Preset Songs SMF (Format 0) Data Format 80 minutes/song .wav (44.1 kHz sample rate, 16 bit resolution, stereo) Metronome Yes Tempo Yes Transpose Yes Tuning Yes Internal Memory 7 Yes approx. 1.5MB (recording capacity + external Songs) External Device USB flash memory (optional) MIDI IN/OUT Headphones Connectors approx. 550KB/Song 50 Preset Songs, 5 Voice Demo Songs SMF (Format 0, Format 1), ESEQ Intelligent Acoustic Control Connectivity 1 approx. 1.5 MB (approx. 550KB/Song) Playback Length of Recording/Playback (max.) Overall Controls 5 Recording Scale Type Storage CFX Sampling Sustain Samples Polyphony Data Format Functions Tone Generation Technology String Resonance Recording Recording/ Playback (Audio Songs) English Fallboard Tone Generation Recording/ Playback (MIDI Songs) Yes 7-Segment LED Panel Language Effects 3 Yes Display Type Tone Generation/ Voices Fixed/Soft/Medium/Hard Half Pedal GP Responsive Damper Pedal Cabinet 88 (A-1–C7) White keys Touch Sensitivity Control Interface 463mm (18-1/4") 109kg (240Ibs., 5oz) PHONES x 2 AUX IN [L/L+R] [R] AUX OUT [L/L+R] [R] USB TO DEVICE Yes USB TO HOST Yes Amplifiers and Speakers Amplifiers (40W + 40W) x 2 Speakers (16cm + 1.9cm) x 2 Accessories Included Accessories Owner’s Manual, AC Power Cord, Felt Key Cover, Bench (included or optional depending on locale), My Yamaha Product User Registration, Felt Strips x 3, 50 greats for the Piano (Music Book) * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. Optional Accessories Headphones HPE-160 NU1 Owner’s Manual 33 Index A L S Accessories ...................................5 Audio recording .........................21 Audio Song .................................18 AUX IN .......................................27 AUX OUT ..................................28 Local Control on/off ..................29 Scale ........................................... 17 Song ............................................ 18 Song Category ........................... 18 Specifications ............................ 33 B Backup ........................................26 Beat .............................................14 C Character Code ...........................20 Computer-related Operations ......5 Copy ............................................24 Maintenance ...............................32 Master Volume ...........................10 Mean-Tone ..................................17 Message List ...............................30 Metronome .................................14 MIDI ......................................27, 29 MIDI Basics .................................5 MIDI recording ..........................21 MIDI Reference ...........................5 MIDI Song ..................................18 Music Rest ....................................9 Delete ..........................................25 Demo Song List .........................13 Display ..........................................8 E Equal ...........................................17 External Song .............................18 F Fast forward ................................19 Format (USB flash memory) ....24 G GP Responsive Damper Pedal ..11 H Half Pedal Point .........................11 Half-pedal ...................................11 Headphone ..................................12 Hz (Hertz) ...................................16 I I.A. Control (Intelligent Acoustic Control) ...12 Initializing ...................................26 K Kirnberger ...................................17 NU1 Owner’s Manual T Tempo ................................... 13–14 Touch Sensitivity ....................... 15 Transpose ................................... 16 Troubleshooting ........................ 31 Tuning ........................................ 16 U Noise Gate ..................................28 USB Flash Memory .................. 23 USB TO DEVICE ............... 23, 28 USB TO HOST ......................... 27 User Song .................................. 18 O V Optional Accessories .................33 Voice ........................................... 13 Voice Demo Song ...................... 13 Voice List ................................... 13 Volume Master Volume .................. 10 Metronome Volume .......... 14 N D 34 M P Pedal ............................................11 Pitch ............................................16 Playback all .........................................19 Audio Songs .......................18 Demo Song .........................13 MIDI Songs ........................18 random ................................19 Power ............................................9 PRECAUTIONS ..........................6 Pure Major ..................................17 Pure Minor ..................................17 Pythagorean ................................17 Q Quick Operation Guide .............35 R Recording ....................................21 Reverb .........................................15 Rewind ........................................19 W Werckmeister ............................. 17 On/ OFF v -3 -2 -1 1 3 4 2 3 +2 4 +1 +3 MIN 0 b 1 2 MIN 5 5 6 6 7 7 8 8 9 9 14 16 19 MAX 14 16 19 MAX -5 -4 10 12 13 15 17 18 20 11 ⁄1 -6 10 12 13 15 17 18 20 11 z -3 -2 -1 0 3 4 6 +6 +2 +4 +5 5 x C D C# D# Metronome Volume Metronome Time Signature Metronome/Song Tempo I.A. Control ON/OFF I.A. Control Depth Transpose Base Note +1 +3 n 0 2 z x c v b n m E F G A F# G# A# m +1 B 1 2 3 4 5 , 6 7 -2 -1 0 +2 +4 +1 +3 ⁄2 On/ OFF On/ OFF . ⁄0 Scale Local Control on/off AUX IN Noise Gate ON/OFF Audio Song Volume Half Pedal Point Touch Sensitivity De-1 fault +10 -10 , . ⁄0 ⁄1 ⁄2 ⁄3 c (page 14) (page 14) (page 14) (page 12) (page 12) (page 16) (page 17) OFF 1 2 ⁄3 (page 17) (page 29) (page 28) (page 19) (page 11) (page 15) While holding down the button on the control panel, press one of the corresponding keys shown below to select songs, or set parameters. Quick Operation Guide 3 Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. (weee_eu_en) Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektrische Geräte nicht mit dem normalen Haushaltsabfall entsorgt werden. In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC bringen Sie alte Geräte bitte zur fachgerechten Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen. Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen, und verhindern mögliche negative Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsorgung auftreten könnten. Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte kontaktieren Sie bitte Ihre örtliche Stadt- oder Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel. [Information für geschäftliche Anwender in der Europäischen Union] Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder Zulieferer für weitere Informationen. [Entsorgungsinformation für Länder außerhalb der Europäischen Union] Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie bitte Ihre örtlichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode. (weee_eu_de) Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques. Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels. Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC. En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d'un traitement inapproprié des déchets. Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits. [Pour les professionnels dans l'Union Européenne] Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur ou fournisseur pour plus d'informations. [Information sur le traitement dans d'autres pays en dehors de l'Union Européenne] Ce symbole est seulement valable dans l'Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée. (weee_eu_fr) Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes. Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC. Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos. Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión de residuos o el punto de venta en el cual usted adquirió los artículos. [Para usuarios de negocios en la Unión Europea] Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor información. [Información sobre la Disposición en otros países fuera de la Unión Europea] Este símbolo sólo es válido en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición. (weee_eu_es) 36 NU1 Owner’s Manual The name plate of this product may be found on the bottom of the unit. The serial number of this product may be found on or near the name plate. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. Das Typenschild dieses Produkts befindet sich an der Unterseite des Geräts. Die Seriennummer dieses Produkts befindet sich auf dem Typenschild oder in der Nähe davon. Sie sollten diese Seriennummer an der unten vorgesehenen Stelle eintragen und dieses Handbuch als dauerhaften Beleg für Ihren Kauf aufbewahren, um im Fall eines Diebstahls die Identifikation zu erleichtern. Modell Nr. Serial No. Seriennr. (bottom_en) (bottom_de) La plaque signalétique de ce produit se trouve dans le bas de l'unité. Le numéro de série de ce produit se trouve sur ou près de la plaque signalétique. Notez-le dans l'espace fourni cidessous et conservez ce manuel en tant que preuve permanente de votre achat afin de faciliter l'identification du produit en cas de vol. N° de modèle La placa de identificación de este producto se encuentra en la parte inferior de la unidad. El número de serie de este producto se encuentra en la placa de identificación o cerca de ella. Debe anotar dicho número en el espacio proporcionado a continuación y conservar este manual como comprobante permanente de su compra para facilitar la identificación en caso de robo. N° do modelo N° de série Nº de serie (bottom_fr) (bottom_es) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. (2 wires) NU1 Owner’s Manual 37 For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 “Prisma Insurgentes”, Col. San Jose Insurgentes, Del. Benito Juarez, 03900, Mexico, D.F. Tel: 55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda. Rua Fidêncio Ramos, 302 – Cj 52 e 54 – Torre B – Vila Olímpia – CEP 04551-010 – São Paulo/SP Tel: 011-3704-1377 ARGENTINA Yamaha Music Latin America, S.A., Sucursal Argentina Olga Cossettini 1553, Piso 4 Norte, Madero Este-C1107CEK Buenos Aires, Argentina Tel: 54-11-4119-7000 VENEZUELA Yamaha Music Latin America, S.A., Sucursal Venezuela C.C. Manzanares Plaza P4 Ofic. 0401- Manzanares-Baruta Caracas Venezuela Tel: 58-212-943-1877 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Latin America, S.A. Torre Banco General, Piso No.7, Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, República de Panamá Tel: +507-269-5311 EUROPE THE UNITED KINGDOM/IRELAND Yamaha Music Europe GmbH (UK) Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, U.K. Tel: 01908-366700 GERMANY Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 SWITZERLAND/LIECHTENSTEIN Yamaha Music Europe GmbH Branch Switzerland in Zürich Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 044-387-8080 AUSTRIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 CZECH REPUBLIC/HUNGARY/ ROMANIA/SLOVAKIA/SLOVENIA Yamaha Music Europe GmbH Branch Austria (Central Eastern Europe Office) Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 POLAND/LITHUANIA/LATVIA/ ESTONIA Yamaha Music Europe GmbH Branch Poland Office ul. Wrotkowa 14 02-553 Warsaw, Poland Tel: 022-500-2925 BULGARIA Dinacord Bulgaria LTD. Bul.Iskarsko Schose 7 Targowski Zentar Ewropa 1528 Sofia, Bulgaria Tel: 02-978-20-25 DMI9 Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. MALTA Olimpus Music Ltd. The Emporium, Level 3, St. Louis Street Msida MSD06 Tel: 02133-2144 NETHERLANDS/BELGIUM/ LUXEMBOURG Yamaha Music Europe Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, Netherlands Tel: 0347-358 040 FRANCE Yamaha Music Europe 7 rue Ambroise Croizat, Zone d'activites Pariest, 77183 Croissy-Beaubourg, France Tel: 01-64-61-4000 ITALY Yamaha Music Europe GmbH, Branch Italy Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 SPAIN/PORTUGAL Yamaha Music Europe GmbH Ibérica, Sucursal en España Ctra. de la Coruna km. 17,200, 28231 Las Rozas (Madrid), Spain Tel: +34-91-639-88-88 GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 SWEDEN Yamaha Music Europe GmbH Germany filial Scandinavia J. A. Wettergrensgata 1, Box 30053 S-400 43 Göteborg, Sweden Tel: +46 31 89 34 00 DENMARK Yamaha Music Europe GmbH, Tyskland – filial Denmark Generatorvej 6A, DK-2730 Herlev, Denmark Tel: 44 92 49 00 FINLAND F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511 NORWAY Yamaha Music Europe GmbH Germany Norwegian Branch Grini Næringspark 1, N-1361 Østerås, Norway Tel: 67 16 78 00 ICELAND Skifan HF Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland Tel: 525 5000 RUSSIA Yamaha Music (Russia) LLC. Room 37, bld. 7, Kievskaya street, Moscow, 121059, Russia Tel: 495 626 5005 TURKEY/CYPRUS Yamaha Music Europe GmbH Merkezi Almanya Türkiye İstanbul Şubesi Maslak Meydan Sokak No:5 Spring Giz Plaza Bağımsız Böl. No:3, 34398 Şişli, İstanbul Tel: +90-212-999-8010 OTHER EUROPEAN COUNTRIES Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 AFRICA/MIDDLE EAST ASIA THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 400-051-7700 HONG KONG Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 INDIA Yamaha Music India Pvt. Ltd. Spazedge building, Ground Floor, Tower A, Sector 47, Gurgaon- Sohna Road, Gurgaon, Haryana, India Tel: 0124-485-3300 INDONESIA PT. Yamaha Musik Indonesia (Distributor) Yamaha Music Center Bldg. Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 021-520-2577 KOREA Yamaha Music Korea Ltd. 8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 02-3467-3300 MALAYSIA Yamaha Music (Malaysia) Sdn., Bhd. No.8, Jalan Perbandaran, Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia Tel: 03-78030900 SINGAPORE Yamaha Music (Asia) Private Limited Block 202 Hougang Street 21, #02-00, Singapore 530202, Singapore Tel: 65-6747-4374 TAIWAN Yamaha Music & Electronics Taiwan Co.,Ltd. 2F., No.1, Yuandong Rd. Banqiao Dist. New Taipei City 22063 Taiwan Tel: 02-7741-8888 THAILAND Siam Music Yamaha Co., Ltd. 3, 4, 15 and 16th floor, Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: 02-215-2622 VIETNAM Yamaha Music Vietnam Company Limited 15th Floor, Nam A Bank Tower, 201-203 Cach Mang Thang Tam St., Ward 4, Dist.3, Ho Chi Minh City, Vietnam Tel: +84-8-3818-1122 OTHER ASIAN COUNTRIES http://asia.yamaha.com OCEANIA AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 NEW ZEALAND Music Works LTD P.O.BOX 6246 Wellesley, Auckland 4680, New Zealand Tel: 9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN http://asia.yamaha.com SOUTH AFRICA Global Music Instruments World of Yamaha 19 Eastern Service Road, Eastgate Ext.6, Sandton, South Africa Tel: +27-11-259-7700 OTHER COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jebel Ali, Dubai, United Arab Emirates Tel: +971-4-881-5868 HEAD OFFICE: Yamaha Corporation Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.com/ Manual Development Department © 2011‒2015 Yamaha Corporation Published 01/2015 POAP*.*-**C0 Printed in China WZ13580