Axxess AXEU-MOST25 Guía de instalación

Marca: Axxess

Modelo: AXEU-MOST25

Tipo: Guía de instalación

AXEU-MOST25

INSTALLATION INSTRUCTIONS

ATTENTION: With the key out of the

ignition, disconnect the negative battery

terminal before installing this product.

Ensure that all installation connections,

especially the air bag indicator lights, are

plugged in before reconnecting the battery

or cycling the ignition to test this product.

NOTE: Refer also to the instructions

included with the aftermarket accessory

before installing this device.

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Zip-ties

• Cutters (for zip ties)

TABLE OF CONTENTS

Applications ...........................................................2

Connections ............................................................3

BMW/Mercedes Benz MOST25

Amp Retention Interface 2008-2020

• Retains the Harmon/Kardon amp in BMW

• Retains balance

• Micro-B USB updatable

• Connections done at the amplifier location

• AXEU-MOST25 interface

• AXEU-MOST25 harness

• Fiber optic extension

Product Info

Visit AxxessInterfaces.com for more detailed information

about the product and up-to-date vehicle specific applications

APPLICATIONS

See Next Page

APPLICATIONS

BMW

1 Series .............................................. 2010-2020

2 Series .............................................2014-2020

3 Series..............................................2011-2018

4 Series .............................................2014-2020

5 Series .............................................2010-2016

6 Series .............................................2010-2017

7 Series..............................................2010-2015

X1 .......................................................2015-2020

X3....................................................... 2010-2018

X4 ...................................................... 2014-2018

X5 ..................................................... 2014-2018

X6 ..................................................... 2015-2019

Mercedes Benz

C Class ...............................................2008-2014

CLA Class ........................................... 2013-2015

CLK Class ...........................................2008-2010

CLS Class ............................................2008-2015

E Class ...............................................2008-2015

G Class ...............................................2008-2015

GL Class ............................................. 2008-2015

GLK Class ...........................................2008-2015

M / ML Class ......................................2008-2015

R Class ...............................................2008-2013

SL Class..............................................2008-2013

SLK Class ...........................................2008-2015

APPLICATIONS

REV. 6/19/23 INSTAXEU-MOST25

TO RADIO

Black - Ground

Yellow - Constant

Red - Accessory

Green - Amp level control

White/Red- TBD

White/Blue -

TBD

White/

Green -

TBD

AXEU-MOST25

LD-MOST25

Front

Audio Output

from

Aftermarket Radio

1. Unplug the factory amplifier

2. Remove the OE fiber optic cable for

the amplifier harness

3. Insert the LD-FIBER-ADAPT into fiber optic

position of the OE amplifier (the orange fiber

optic cable is going to be the LD-FIBER-ADAPT

instead of AXEU-MOST25 cable)

4. Plug the amplifier

harness back into the OE

amplifier.

*(Green-Amp level control wire)

Tap wire to ground to Adjust the

overall volume level

Plastic Housing

AXEU-MOST25 Cable

Plastic Housing

Factory Fiber

Optic Connector

OE AMPLIFIER

AXEU-MOST25 Fiber

Optic Connector with

Plastic Housing

AXEU-MOST25 Fiber

Optic Connector

CONNECTIONS DONE AT AMPLIFIER LOCATION

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.edu or call

386-672-5771 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

INSTALLATION INSTRUCTIONS

AXEU-MOST25

Having difficulties? We’re here to help.

Contact our Tech Support line at:

386-257-1187

Or via email at:

[email protected]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 5:00 PM

Sunday: 10:00 AM - 4:00 PM

AXEU-MOST25

INSTRUCCIONES DE INSTALACIÓN

ATENCIÓN: Sin tener la llave puesta en la

marcha, desconecte la terminal negativa de

la batería antes de instalar este producto.

Asegúrese de que todas las conexiones de la

instalación, en especial las luces indicadoras

de las bolsas de aire, estén conectadas antes

de volver a conectar la batería o dar vuelta a la

marcha para probar este producto.

NOTA: También consulte las instrucciones

incluidas con el accesorio genérico antes de

instalar este dispositivo.

CARACTERÍSTICAS DE LA INTERFAZ

INTERFACE COMPONENTS

HERRAMIENTAS NECESARIAS

• Bridas • Cortadores (para bridas)

ÍNDICE

Aplicaciones ...........................................................2

Conexiones ............................................................. 3

BMW/Mercedes Benz MOST25 Interfaz de

Retención de Amplificador 2008-2020

APLICACIONES

• Conserva el amplificador Harmon/Kardon en BMW

• Mantiene el equilibrio

• Micro-B USB actualizable

• Conexiones hechas en la ubicación del amplificador

Ver Página Siguiente

• Interfaz de AXEU-MOST25

• Arnés de AXEU-MOST25

• Extensión de Fibra Óptica

Información

del producto

Para consultar información más detallada acerca del

producto y aplicaciones específicas actuales del vehículo,

visite la página AxxessInterfaces.com