Rev-A-Shelf HPRV-1520 S Instrucciones de operación

Marca: Rev-A-Shelf

Modelo: HPRV-1520 S

Tipo: Instrucciones de operación

InstallatIon InstructIons for:

rV-serIes

Pull-out Waste contaIners and HamPers

With the frame in a closed position, insert the front two screws,

making sure that the framework is square to the front of the

cabinet.

If there is sucient clearance, install rear screws.

If framework prevents access to rear screws, remove framework by

pulling out and lifting frame from slides.

Note: if your product features full extension slides

remove frame by disengaging release triggers (Fig. A). Note: Press one

side up and the other side down. Finally, place your waste container in

the wire frame and the installation is complete.

Your RV series has been shipped fully assembled for ease of

installation.

•FirstRemovethecontainer(s)fromthewireframe.

• Placetheframeinsideofyourcabinet.

• Looktomakesurethatthereisplentyofclearanceto

shut the door and for the waste container.

FIGURE A

If you have any questions or would like additional information on the

rest of our products for the kitchen, closet, or bathroom, please contact

aCustomerServiceSpecialistat:1-800-626-1126orvisitusontheweb

atwww.rev-a-shelf.com.Also,don'tforgetaboutourdoormountkit

that will attach your current cabinet door to your RV Waste Container or

Hamper.

Installation Instructions for:

RV-Series

Pull-Out Waste Containers and Hampers

With the frame in a closed position, insert the front two

screws, making sure that the framework is square to the

front of the cabinet.

If there is sufﬁcient clearance, install rear screws.

If framework prevents access to rear screws, remove

framework by pulling out and lifting frame from slides.

Note: if your product features full extension slides

remove frame by disengaging release triggers (Fig. A).

Finally, place your waste container in the wire frame and the

installation is complete.

Your RV series has been shipped fully assembled for ease

of installation.

• First Remove the container(s) from the wire frame.

• Place the frame inside of your cabinet.

• Look to make sure that there is plenty of clearance to

shut the door and for the waste container.

I-RV-05

If you have any questions or would like additional information

ro,tesolc,nehctikehtrofstcudorpruofotserehtno

bathroom, please contact a Customer Service Specialist at:

1-800-626-1126 or visit us on the web at www.rev-a-shelf.com.

Also, don't forget about our door mount kit

that will attach your current cabinet door to your RV Waste

Container or Hamper.

NOTE: The HPRV Hamper includes a

retaining clip which attaches to the rear of

the hamper. Simply slide this clip onto the

hamper on the bottom row of holes.

NOTE: The HURV Utility basket includes

a retaining clip which attaches to the rear

of the basket. Simply center this clip on

the third row from the bottom and bend

retaining clips down to

keep clip in place.

Retaining Clip

VotreSérieRVaétélivréecomplètementmontéepourfacilitersoninstallation.

•D’abord,enleverla(les)poubelle(s)duchâssisenld’acier.

•Placerlechâssisàl’intérieurdevotrecabinet.

•Vérierqu’ilyasusammentdeplacepourfermerlaporteetpouraccommoderla

poubelle.

SuSerieRVhasidocompletamentemontadodeantemanoparafacilitarsuinstalación.

•Primero,hayquesacarelcubooloscubosdelchasisenhilodeacero.

•Colocarelchasisalinteriordesugabinete.

•Vericarquehayespaciosucienteparacerrarlapuertayparaelcubodebasura.

Aveclechâssisenpositionfermée,installezlesdeuxvisdedevant,prenantsoindepositionner

lechâssisenéquerreparrapportaudevantducabinet.

Conelchasisenlaposicióncerrada,instalarlosdostornillosdedelante,cuidandodecolocarel

chasis bien cuadrado con respecto al borde delantero del gabinete.

S’ilyasusammentdeplace,installezlesvisdederrière.

Aucasoùlechâssisnepermettraitpasl’accèsauxvisdel’arrière,enleverlechâssisenle

soulevantpourlesortirdesglissières.

Note: si votre unité est équipée de glissières complètement extensibles, il faut d’abord dégager les

dispositifs de fermeture avant d’enlever le châssis (Figure A). Pressez un levier vers le haut et l'autre levier

vers le bas.

Finalement,placerlapoubelledanslechâssisenld’acieretvotreinstallationestterminée.

Sihayespaciosuciente,instalarlostornillostraseros.

En el caso de que el chasis no deje acceso a los tornillos traseros, remover el chasis con jalarlo

hacia arriba para sacarlo de los rieles.

Nota: si su unidad está equipada de rieles completamente extensibles, primero hay que soltar los

dispositivos de cierre antes de sacar el chasis (Figura A). Presione la una palanca para arriba y la otra

palanca abajo. Finalmente,colocarelcubodebasuraenelchasisenhilodeaceroysuinstalaciónyaestá

terminada.

Aucasoùvousauriezdesquestionsouvousvoudriezrecevoirdesrenseignementssupplémentairessurnosautresproduitspourcuisine,placardsousalle

debains,veuillezappelernosSpécialistesauServiceClientsau1-800-626-1126ouallerànotresitewww.rev-a-shelf.com.Aussi,nepasoubliernotrekitpour

montersurportequipermetd’attachervotreportedecabinetpoubellesdedèchetsetpaniersàlingeàglissièresextensiblesdelaSérieRVàlaPoubelleRV.

SiUstedtienecualquierpreguntaosiquiererecibirmásdetallessobrenuestrosotrosproductosparalacocina,

losarmariosoelcuartodebaños,porfavorllameanuestrosEspecialistasalServiciodelosClientesal1-800-626-

1126ovisitarnuestrositioenlaredalwww.rev-a-shelf.com.También,nohayqueolvidarnuestrokitparamontar

enlapuertaquepermitejarsupuertadegabinetecubodebasuraycestaspararopamontadosobrerieles

extensiblesdelaSerieRValcubodebasuraRV.

nstructionsd’Installationpour:PoubellesdedèchetsetpaniersàlingeàglissièresextensiblesdelaSérieRV

InstruccionesdeInstalaciónpara:

CubodebasuraycestaspararopamontadosobrerielesextensiblesdelaSerieRV

FIGURE A

Note:LePanierHPRVcomprenduneattachedesoutienquis’attacheàl’arrièredupanier.Ilfautjusteglissercette

attachesurlepaniersurlarangéedetrousdubas.

Nota:LacestaHPRVincluyeunclipderetenciónelcualsesujetaalaparteposteriordelacesta.Simplementedeslice

esteclipenlacestaenlaparteinferiordelalaconagujeros.

Installation Instructions for:

RV-Series

Pull-Out Waste Containers and Hampers

With the frame in a closed position, insert the front two

screws, making sure that the framework is square to the

front of the cabinet.

If there is sufﬁcient clearance, install rear screws.

If framework prevents access to rear screws, remove

framework by pulling out and lifting frame from slides.

Note: if your product features full extension slides

remove frame by disengaging release triggers (Fig. A).

Finally, place your waste container in the wire frame and the

installation is complete.

Your RV series has been shipped fully assembled for ease

of installation.

• First Remove the container(s) from the wire frame.

• Place the frame inside of your cabinet.

• Look to make sure that there is plenty of clearance to

shut the door and for the waste container.

I-RV-05

If you have any questions or would like additional information

ro,tesolc,nehctikehtrofstcudorpruofotserehtno

bathroom, please contact a Customer Service Specialist at:

1-800-626-1126 or visit us on the web at www.rev-a-shelf.com.

Also, don't forget about our door mount kit

that will attach your current cabinet door to your RV Waste

Container or Hamper.

NOTE: The HPRV Hamper includes a

retaining clip which attaches to the rear of

the hamper. Simply slide this clip onto the

hamper on the bottom row of holes.

NOTE: The HURV Utility basket includes

a retaining clip which attaches to the rear

of the basket. Simply center this clip on

the third row from the bottom and bend

retaining clips down to

keep clip in place.

Retaining Clip

Installation Instructions for:

RV-Series

Pull-Out Waste Containers and Hampers

With the frame in a closed position, insert the front two

screws, making sure that the framework is square to the

front of the cabinet.

If there is sufﬁcient clearance, install rear screws.

If framework prevents access to rear screws, remove

framework by pulling out and lifting frame from slides.

Note: if your product features full extension slides

remove frame by disengaging release triggers (Fig. A).

Finally, place your waste container in the wire frame and the

installation is complete.

Your RV series has been shipped fully assembled for ease

of installation.

• First Remove the container(s) from the wire frame.

• Place the frame inside of your cabinet.

• Look to make sure that there is plenty of clearance to

shut the door and for the waste container.

I-RV-05

If you have any questions or would like additional information

ro,tesolc,nehctikehtrofstcudorpruofotserehtno

bathroom, please contact a Customer Service Specialist at:

1-800-626-1126 or visit us on the web at www.rev-a-shelf.com.

Also, don't forget about our door mount kit

that will attach your current cabinet door to your RV Waste

Container or Hamper.

NOTE: The HPRV Hamper includes a

retaining clip which attaches to the rear of

the hamper. Simply slide this clip onto the

hamper on the bottom row of holes.

NOTE: The HURV Utility basket includes

a retaining clip which attaches to the rear

of the basket. Simply center this clip on

the third row from the bottom and bend

retaining clips down to

keep clip in place.

Retaining Clip

Installation Instructions for:

RV-Series

Pull-Out Waste Containers and Hampers

With the frame in a closed position, insert the front two

screws, making sure that the framework is square to the

front of the cabinet.

If there is sufﬁcient clearance, install rear screws.

If framework prevents access to rear screws, remove

framework by pulling out and lifting frame from slides.

Note: if your product features full extension slides

remove frame by disengaging release triggers (Fig. A).

Finally, place your waste container in the wire frame and the

installation is complete.

Your RV series has been shipped fully assembled for ease

of installation.

• First Remove the container(s) from the wire frame.

• Place the frame inside of your cabinet.

• Look to make sure that there is plenty of clearance to

shut the door and for the waste container.

I-RV-05

If you have any questions or would like additional information

ro,tesolc,nehctikehtrofstcudorpruofotserehtno

bathroom, please contact a Customer Service Specialist at:

1-800-626-1126 or visit us on the web at www.rev-a-shelf.com.

Also, don't forget about our door mount kit

that will attach your current cabinet door to your RV Waste

Container or Hamper.

NOTE: The HPRV Hamper includes a

retaining clip which attaches to the rear of

the hamper. Simply slide this clip onto the

hamper on the bottom row of holes.

NOTE: The HURV Utility basket includes

a retaining clip which attaches to the rear

of the basket. Simply center this clip on

the third row from the bottom and bend

retaining clips down to

keep clip in place.

Retaining Clip

Nota:LacestadeutensiliosHURVincluyeunclipderetenciónelcualsesujetaalapartetrasera

delacesta.Simplementecentreesteclipenlaterceraladelaparteinferiorydobleelclipde

retenciónhaciaabajoparamantenerloenposición.

Note:LePanierUtilitaireHURVcomprenduneattachedesoutienquis’attacheàl’arrièredupanier.

Ilfautjustecentrercetteattachesurlatroisièmerangéeàpartirdubasetplierlesattachesde

soutien pour les maintenir en place.

AttachedeSoutien

Clipderetención

AttachedeSoutien

Clipderetención

Rev-A-Shelf HPRV-1520 S Instrucciones de operación

Marca: Rev-A-Shelf

Modelo: HPRV-1520 S

Tipo: Instrucciones de operación

Descargar PDF

informe

En otros idiomas

français: Rev-A-Shelf HPRV-1520 S Mode d'emploi
English: Rev-A-Shelf HPRV-1520 S Operating instructions

Rev-A-Shelf HPRV-1520 S Instrucciones de operación

Rev-A-Shelf HPRV-1520 S Instrucciones de operación

En otros idiomas

Documentos relacionados