Tripp Lite SRCOOL33K Instrucciones de operación

Tipo
Instrucciones de operación

Este manual también es adecuado para

El Tripp Lite SRCOOL33K es una unidad autónoma de aire acondicionado que ofrece una solución potente y eficiente para climatizar espacios pequeños a medianos. Con una capacidad de enfriamiento de 33,000 BTU/h, este dispositivo es ideal para habitaciones de hasta 1,000 pies cuadrados. El SRCOOL33K cuenta con un sistema de control de temperatura digital que te permite ajustar la temperatura deseada con precisión. Además, incluye un temporizador programable que te permite configurar el dispositivo para que se encienda y apague automáticamente a horas específicas.

El Tripp Lite SRCOOL33K es una unidad autónoma de aire acondicionado que ofrece una solución potente y eficiente para climatizar espacios pequeños a medianos. Con una capacidad de enfriamiento de 33,000 BTU/h, este dispositivo es ideal para habitaciones de hasta 1,000 pies cuadrados. El SRCOOL33K cuenta con un sistema de control de temperatura digital que te permite ajustar la temperatura deseada con precisión. Además, incluye un temporizador programable que te permite configurar el dispositivo para que se encienda y apague automáticamente a horas específicas.

X2
UNPACKING INSTRUCTIONS
Self-Contained
Air Conditioning Unit
Models: SRCOOL33K, SRXCOOL33K
Copyright © 2013 Tripp Lite. All rights reserved.
Read All Instructions and
Warnings Before Unpacking.
WARNING: The air conditioning unit is extremely heavy.
Do not attempt to unpack or move the unit without
assistance. Until properly installed and stabilized, the unit
is prone to tipping and could cause property damage and/or
personal injury. Do not push or pull the unit while unpacking.
Do not attempt to remove the unit from the pallet without the
assistance of at least three other persons. Do not push the
unit from the sides as this may create a tipping hazard.
WARRANTY
REGISTRATION:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
1
Inspect the shipping container(s)
for visible damage. The container(s)
include a Tip and Tell device that will
indicate if the unit has been tipped,
mishandled or overturned during
transit. If you determine that the unit
has been damaged, contact Tripp Lite
for assistance. Do not use the unit if it
has been damaged or mishandled.
4
Remove the bolts from the shipping
brackets securing the unit to the pallet,
then remove the shipping brackets from
the cooling unit. Raise the leveling feet.
Warning: Be extremely careful, as
the unit could shift unexpectedly.
2
Cut the plastic straps on the outside
of the carton. Confirm that the unit is
stable and cut the box as shown on
opposite corners. Remove any wrapping
or interior cushioning material.
5
Attach ramps to pallet. Insert ramp
mounting tabs into mounting groove
on pallet. Position ramps so they are
aligned with the unit’s wheels. For
added safety, Tripp Lite recommends
that you secure the ramps to the pallet
with user-supplied screws.
3
Confirm that the model name and
rating at the rear of the cabinet match
the unit you ordered. Examine the
cabinet for any damaged parts. The
container should include the unit’s
Installation Manual, Owner’s Manual
and 4 Air Ducts.
6
Position at least two persons at the
front and two persons at the rear of
the unit. Slowly push the unit off the
shipping pallet, down the ramp and to
the floor.
SRCOOL33K & SRXCOOL33K Shipping Specifications
Gross shipping weight (lb/kg) 775/351.53
Shipping dimensions (HWD/in) 85.5 x 26.5 x 46.85
Shipping dimensions (HWD/cm) 217.17 x 67.31 x 119
Using a forklift or pallet jack, move the unit as close as
possible to its permanent installation site before unpacking it
(See Installation Manual for site selection instructions).
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
1
4 5 6
2
SIDE VIEW
STAPLES
STRAPS
X2
INSTRUCCIONES DE DESEMPAQUE
Unidad Autónoma de
Aire Acondicionado
Modelos: SRCOOL33K, SRXCOOL33K
Copyright © 2013 Tripp Lite. Todos los derechos reservados.
Lea todas las instrucciones y
advertencias antes de desempacar.
ADVERTENCIA: La unidad de aire acondicionado es extremadamente
pesada. No intente desempacar o mover la unidad sin ayuda.
Hasta que haya sido instalada y estabilizada correctamente, la
unidad tiende a volcarse y podría causar daños materiales y/o
lesiones personales. No empuje ni jale de la unidad mientras la
está desempacando. No intente retirar la unidad de la tarima sin la
ayuda de al menos otras tres personas. No empuje la unidad por los
costados ya que puede provocarse una volcadura.
1
Inspeccione el(los) contenedor(es) del
embarque en busca de daños visibles. El(los)
contenedor(es) tienen un dispositivo "Tip and
Tell" que indicará si la unidad se ha ladeado,
manejado mal o volcado durante el tránsito.
Si determina que la unidad ha sido dañada,
póngase en contacto con Tripp Lite para
solicitar asistencia. No utilice la unidad si se
ha dañado o ha sido mal manejada.
4
Retire los tornillos de los soportes de
embarque que aseguran la unidad a la
tarima, después retire los soportes de
embarque de la unidad de enfriamiento.
Levante las patas de nivelación.
Advertencia: Sea muy cuidadoso,
ya que la unidad podría desplazarse
inesperadamente.
2
Corte los flejes de plástico en la parte externa
de la caja. Confirme que la unidad está
estabilizada y corte la caja en las esquinas
opuestas, como se muestra. Remueva
cualquier material de embalaje o de
acojinado interior.
5
Coloque rampas a la tarima. Inserte pestañas
de instalación de la rampa en la ranura de
instalación de la tarima. Coloque las rampas
de modo que estén alineadas con las ruedas
de la unidad. Para seguridad adicional, Tripp
Lite le recomienda asegurar las rampas a
la tarima con tornillos suministrados por el
usuario.
3
Confirme que el nombre del modelo y
clasificación en la parte posterior del gabinete
concuerden con la unidad que ordenó.
Examine el gabinete para detectar partes
dañadas. El contenedor debe incluir el
Manual de Instalación, Manual del Propietario
y 4 Ductos de Aire.
6
Coloque al menos dos personas al frente
y dos personas en la parte posterior de la
unidad. Empuje cuidadosamente la unidad
fuera de la tarima de embarque, hacia abajo
de la rampa y al piso.
Especificaciones de Embarque - SRCOOL33K y SRXCOOL33K
Peso bruto de embarque (lb/kg)
775/351.53
Dimensiones de envío (Al x An x Pr/pulgadas)
85.5 x 26.5 x 46.85
Dimensiones de envío (Al x An x Pr/cm)
217.17 x 67.31 x 119
Usando un montacargas o gato porta-tarimas, mueva la unidad tan
cerca como sea posible a su sitio de instalación permanente antes de
desempacarla (Consulte el Manual de Instalación para instrucciones de
selección del sitio).
1111 W. 35th Street, Chicago, IL 60609 EE UU
www.tripplite.com/support
1
4 5 6
2
SIDE VIEW
GRAPAS
FLEJES
MÁS DE
X2
INSTRUCTIONS POUR LE DÉBALLAGE
Climatiseur
de type armoire
Modèles: SRCOOL33K, SRXCOOL33K
Copyright © 2013 Tripp Lite. Tous droits réservés.
Lisez toutes les instructions et les
avertissements avant le déballage.
AVERTISSEMENT : Le climatiseur est extrêmement lourd. N'essayez
pas de le déballer ou de le déplacer sans aide. Jusqu'à ce qu'elle soit
installée et stabilisée correctement, l'unité est sujette à se renverser,
causant des dommages à la propriété et des blessures corporelles.
Ne poussez pas ou ne tirez pas l'unité lors du déballage. N'essayez
pas de retirer l'unité de la palette sans l'aide d'au moins trois (3)
autres personnes. Ne poussez pas sur les côtés de l'unité puisque
ceci pourrait créer un danger de renversement.
1
Inspectez le(s) contenant(s) d'expédition pour
toutes indications de dommage physique visible.
Le(s) contenant(s) sont équipé(s) d'un témoin
d'inclinaison (« Tip & Tell ») qui indiquera si
l'unité a été inclinée, renversée, ou manipulée
sans prendre les précautions nécessaires lors
de l'expédition. Si vous déterminez que l'unité
a été endommagée, contactez Tripp Lite pour
obtenir de l'aide. N'utilisez pas l'unité si elle a
été endommagée ou manipulée sans prendre
les précautions nécessaires.
4
Retirez les boulons des supports d'expédition
fixant l'unité à la palette et retirez les
supports d'expédition du bloc refroidisseur.
Remontez les pattes de mise à niveau.
Avertissement : Soyez extrêmement
prudent puisque l'unité pourrait se
déplacer de manière imprévue.
2
Coupez les bandes de plastique
entourant la boîte. Assurez-vous
que l’unité soit bien stable, puis
coupez la boîte selon les indications
aux coins opposés. Retirez tout le
matériel d’emballage et les matériaux
d’amortissement.
5
Fixez les rampes à la palette. Insérez les
languettes des rampes dans la fente de
montage sur la palette. Positionnez les
rampes pour qu'elles s'alignent avec les
roulettes de l'unité. Pour plus de sécurité,
Tripp Lite recommande que vous fixiez
les rampes à la palette au moyen de vis
fournies par l'utilisateur.
3
Assurez-vous que le nom et les spécifications
nominales à l'arrière de l'unité correspondent
à l'unité que vous avez commandée. Inspectez
l'armoire pour toutes indications de pièces
endommagées. Le contenant devrait inclure le
manuel d'installation, le manuel de l'utilisateur et
quatre (4) conduits d'air.
6
Placez au moins deux (2) personnes à
l'avant et deux (2) personnes à l'arrière de
l'unité. Poussez lentement l'unité hors de la
palette d'expédition, descendant la rampe
jusqu'à ce que l'unité soit sur le plancher.
Spécifications d’expédition pour le SRCOOL33K et pour le SRXCOOL33K
Poids brut d'expédition (lb/kg)
775/351,53
Dimensions à l'expédition (H. x L. x P./po) 85,5 x 26,5 x 46,85
Dimensions à l'expédition (H. x L. x P./cm) 217,17 x 67,31 x 119
En utilisant un chariot élévateur à fourche ou un transpalette, déplacez
l'unité aussi près que possible du site de son installation permanente
avant de le déballer (Voyez le manuel d'installation pour les instructions
portant sur la sélection du site).
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
1
4 5 6
SIDE VIEW
CRAMPONS
BANDES
2
X2
УКАЗАНИЯ ПО РАСПАКОВКЕ
Автономный
кондиционер
Модели: SRCOOL33K, SRXCOOL33K
Защищено авторским правом © 2013 Tripp Lite. Перепечатка запрещена.
Перед распаковкой товара внимательно
ознакомьтесь со всеми указаниями и
предупреждениями.
ВНИМАНИЕ! Устройство кондиционирования воздуха является чрезвычайно тяжелым.
Не распаковывайте и не перемещайте данное устройство в одиночку. До момента
надлежащей установки и фиксации данного устройства сохраняется опасность его
опрокидывания с возможным причинением материального ущерба и/или вреда
здоровью. Не перемещайте устройство от себя или к себе в процессе распаковывания.
Не пытайтесь снять устройство с поддона в одиночку, а обратитесь за помощью как
минимум еще трех человек. Не толкайте устройство с боков, поскольку при этом
существует опасность его опрокидывания.
1
Осмотрите транспортировочный(-е) контейнер(ы) на
предмет наличия видимых повреждений. Контейнер(ы)
оснащен(ы) индикаторным устройством, дающим
грузополучателю наглядную информацию о возможном
наклоне/опрокидывании груза или неправильном
обращении с ним в ходе транспортировки. В случае
установления подобного факта повреждения устройства
обратитесь за помощью в компанию Tripp Lite. Не
пользуйтесь устройством в случае его повреждения или
неправильного обращения с ним.
4
Вывинтите болты из транспортировочных кронштейнов,
обеспечивающих крепление устройства к поддону,
после чего снимите транспортировочные кронштейны
с кондиционера. Выдвиньте регулировочные ножки.
Внимание! Будьте предельно осторожны,
поскольку при этом существует опасность
неожиданного смещения устройства
относительно ранее закрепленного положения.
2
Разрежьте полимерные ленты, опоясывающие коробку
с внешней стороны. Убедитесь в том, что устройство
находится в устойчивом состоянии, и разрежьте коробку
как изображено на ее противоположных углах. Удалите
изнутри упаковки все оберточные и амортизирующие
прокладочные материалы.
5
Прикрепите к поддону наклонные направляющие.
Вставьте монтажные петли наклонных направляющих
в опорную прорезь поддона. Расположите наклонные
направляющие таким образом, чтобы они совместились
с колесами устройства. В целях обеспечения
дополнительной безопасности компания Tripp Lite
рекомендует прикрепить наклонные направляющие
к поддону с помощью винтов-саморезов (в комплект
поставки не входят).
3
Убедитесь в том, что наименование модели и
маркировка на задней панели корпуса соответствуют
заказанному вами устройству. Проверьте устройство
на предмет наличия поврежденных деталей. В
контейнере также должны находиться Руководство по
монтажу, Руководство пользователя и 4 воздуховода.
6
Убедитесь, что спереди устройства находятся не
менее двух человек и не менее двух человек - сзади.
Медленно сдвиньте устройство с транспортировочного
поддона вдоль наклонных направляющих на пол.
Отгрузочные спецификации для моделей SRCOOL33K и SRXCOOL33K
Отгрузочный вес (фунты/кг) 775/351,53
Габаритные размеры в упаковке (ВхШхГ, дюймы) 85,5 x 26,5 x 46,85
Габаритные размеры в упаковке (ВхШхГ, см) 217,17 x 67,31 x 119
Перед распаковкой устройства переместите его с помощью вилочного погрузчика
или захвата для подъема поддонов как можно ближе к предполагаемому месту его
постоянного размещения (указания по выбору места установки см. в Руководстве по
монтажу).
13-02-169 • 93-3140_RevB
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
1
4 5 6
2
SIDE VIEW
СКОБЫ
ОБВЯЗОЧНЫЕ
ЛЕНТЫ
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Tripp Lite SRCOOL33K Instrucciones de operación

Tipo
Instrucciones de operación
Este manual también es adecuado para

El Tripp Lite SRCOOL33K es una unidad autónoma de aire acondicionado que ofrece una solución potente y eficiente para climatizar espacios pequeños a medianos. Con una capacidad de enfriamiento de 33,000 BTU/h, este dispositivo es ideal para habitaciones de hasta 1,000 pies cuadrados. El SRCOOL33K cuenta con un sistema de control de temperatura digital que te permite ajustar la temperatura deseada con precisión. Además, incluye un temporizador programable que te permite configurar el dispositivo para que se encienda y apague automáticamente a horas específicas.