ROOMS TO GO 11281021 Assembly Instructions
- Tipo
- Assembly Instructions
1
LIST OF PARTS
SHLI U81003-42B SKU: 11281019
(Canyon/Walnut/RedrockPiping)
U81003-42B SKU: 11281021
(Canyon/Gray/Fog Piping)
Loveseat - Console Dual Power Reclining
49900950
NO Description Item Quantity
A
Seat
1
B
C
D
Left Backrest 1
E
Console Backrest 1
F
Right Backrest 1
G
LSF KD Wing 1
RSF KD Wing 1
Wall Plug
Transformer 1
PART LIST
TOOLS REQUIRED: NO TOOLS REQUIRES
LIST OF PARTS
2
A
B C D
2
ASSEMBLY INSTRUCTIONS
Take out the KD wings (E& F)
underneath the LSF and RSF arms
which fixed by the red ropes, then
you can remove the ropes away.
G
49900950
ASSEMBLY lNSTRUCTlONS
-
A WARNING
JIANGSU MULIN INTELLIGENCE ELECTRIC CO.,LTD
SeCg
】
A WARNING
m D o D
曰幺
JIANGSU MULIN INTELLIGENCE ELECTRIC CO.,LTD
49900950
Install the Backrest(B & C &D) into the Seat (A ) by connecting the female receivers to the male
connectors.
Ensure that female receivers on each side of the backrest are connected to the seat male connectors.
Install all backrests of sectional pieces in the same way described above.
KD Wing Assemble:
Hold the back KD wings and flap with both hands and line male and female brackets together (L matches L,
R matches R). Apply downward force to top of back (one side at a time) to ensure snap engagement.
A
B C D
E
F
L
R
4
PART ASSEMBLY
3
POWER CONNECTIONS
STEP 1
49900950
v
v
4
POWER CONNECTIONS
Lift velcroed flap located at the bottom back of the loveseat .
Latch male pin connector from backrest (headrest motor wire ) to female wire receiver located in the
back bottom of the
loveseat underneath the flap.
This instruction is applicable to loveseat console dual power reclining.
v v
5
ELECTRICAL
v
STEP 2
49900950
STEP 3 :Connects to transformer switch. wall plug transformer
wall plug transformer to Transformer
Power Switch
STEP 4 :Connects to outlet. wall plug transformer
wall plug transformer to Electrical Outlet
wall plug transformer Plug Electrical Wall Outlet
POWER CONNECTIONS
green LED lit up
649900950
5
ELECTRICAL
1. Press button for Seat Forward
2. Press button for Seat Backwards
3. Press button for Headrest Forward
4. Press button for Headrest Backwards
5. Home Button
7
STEP 5
1
2
4
5
3
49900950
*Keep unit at least 24" from all heat sources.
*Avoid placing unit in areas where unit can be exposed to direct sunlight other powerful light sources,
as fading or discoloration may occur.
*Do not reach under seat when mechanism is operating or serious injury may occur.
*Reclining mechanism should only be operated while seated properly.
*Do not sit on arms or backrest.
*Do not jump or roughhouse on furniture.
WARNINGS
*Keep unit at least 5.5 inch from the wall.
5.5 inch
wall
49900950
*If unit must be moved, do not drag. Unit must be lifted in order to be moved.
*Do not continuously operate mechanism for more than one minute or unit may go into protection
mode by shutting down to prevent overheating.
*Unplug unit from power source prior to cleaning mechanism.
*Do not allow electrical components to come into contact with any liquids.
*Upholstered furniture is packaged tightly to protect it during transit. This packaging can sometimes
cause creases or misshaped cushions when the furniture comes out of the packaging. These issues will
correct themselves over time as the fibers of the cushions are exposed to air.However, shaping the
cushions with your hands can alleviate the creases and compressed fibers more quickly.
CARE AND CLEANING
*Dust often and use a vacuum cleaner to remove debris from seams and crevasses.
*Use a soft damp cloth to gently clean soiled areas and wipe clean. Do not rub.
*Do not use household cleaners or solvents. Such cleaners may cause damage and/or discoloration.
*Do regularly use dedicated leather care product onto the leather furniture to prevent built up of body oils.
49900950
TROUBLESHOOTING
PROBLEM SOLUTION
working Ensure that wall power outlet is functional Step
Reclining Ensure that wall power outlet is opertaionalStep
working Check all power connections Step
gaps Ensure the backrests are properly clipped into the male posts located on seat mechanism
Check that brackets are not loose, positionedimproperly or bent.
2,3,4
Headrest not
Not
USB not
Backrests .
2,3,4
2,3,4
49900950
3, 4
3, 4
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
ROOMS TO GO 11281021 Assembly Instructions
- Tipo
- Assembly Instructions
en otros idiomas
- English: ROOMS TO GO 11281021
Artículos relacionados
Otros documentos
-
La-Z-Boy P91893 Manual de usuario
-
HoMedics EL-200 Instruction book
-
Human Touch PC Rhapsody (PC-085) Manual de usuario
-
-
Panasonic EP1285 Manual de usuario
-
-
-
-
-
