Yamaha TSX-B237 El manual del propietario

TSX-B237
Yamaha
Marca
Yamaha
Modelo
TSX-B237
Tipo
El manual del propietario
EN
Desktop Audio System
Owner’s Manual
2
Table of contents
Introduction ................................................................................. 3
Accessories ....................................................................................................................................................... 3
About this document ................................................................................................................................ 3
Using the unit ............................................................................... 4
Part names .................................................................................... 5
The unit .............................................................................................................................................................. 5
Display ................................................................................................................................................................. 6
Remote control .............................................................................................................................................. 7
Preparation .................................................................................. 9
Turn on the unit ............................................................................................................................................ 9
Set the unit’s clock .................................................................................................................................... 10
Using the sleep timer .............................................................................................................................. 10
Play from an input source ......................................................... 11
Listening to an audio CD ...................................................................................................................... 11
Listening to music via Bluetooth® .................................................................................................. 12
Listening to DAB stations (Australia model only) .................................................................. 15
Listening to FM radio stations ........................................................................................................... 18
Listening to music on USB flash drives ........................................................................................ 20
Listening to music from an external device ............................................................................. 21
Useful features ........................................................................... 22
Shuffle/repeat playback ........................................................................................................................ 22
Playback information .............................................................................................................................. 23
Adjusting sound quality ........................................................................................................................ 24
Registering favorites with SCENE .................................................................................................... 25
Alarm (IntelliAlarm) ................................................................................................................................... 26
Child lock function .................................................................................................................................... 29
Charging a mobile device (Qi) .......................................................................................................... 30
Adjusting display brightness (dimmer) ....................................................................................... 31
Option settings ........................................................................................................................................... 32
Troubleshooting ........................................................................ 34
Messages in the display ............................................................. 40
Devices/media, and file formats supported by the unit ......... 41
Specifications ............................................................................. 43
Thank you for purchasing this Yamaha product.
Before using the unit, be sure to read this document and the supplied “Safety
Brochure” to ensure proper and safe use. Keep these documents readily available for
future reference.
3
Introduction
Confirm package contents and important information about this manual.
Accessories About this document
• This document provides detailed instructions on operating all of the unit’s functions.
• Instructions concentrate on use of the remote control to operate the unit.
• Illustrations are provided for reference purposes only, and should not be considered
completely accurate in every case.
• In this document, smartphones and other mobile devices running the iOS or
Android operating systems are collectively referred to as “mobile devices”.
• Screenshots in this document were captured on a device running the English
version of iOS. Actual screen displays may differ depending upon the version of the
app or iOS used.
• Symbols and conventions
This content indicates “risk of serious injury or death.”
Notice Indicates points that you must observe in order to prevent product failure,
damage or malfunction and data loss, as well as to protect the
environment.
Note Indicates notes on instructions, restrictions on functions, and additional
information that may be helpful.
References another page or pages that provide additional information.
Remote control Quick Manual
Non-skid pad ( p. 30) Safety Brochure
4
Using the unit
• This unit is a desktop audio system that can play audio from an incredibly wide range of input sources, including CDs, Bluetooth devices, and radio stations.
• This unit is equipped with a convenient charging function and an alarm function that wakes you gently.
• The free dedicated Multimedia Music Controller app for mobile devices can be used to easily control playback or configure the unit’s settings. Download the Multimedia Music
Controller app to your mobile device from the App Store or Google Play.
Bluetooth CD USB
Multimedia Music
Controller
IntelliAlarm wakes you up
gently.
“Alarm (IntelliAlarm)” ( p. 26)
Support for a broad range of input
sources.
“Play from an input source” ( p. 11)
The unit’s top panel supports wireless
smartphone charging.
“Charging a mobile device (Qi)” ( p. 30)
5
Part names
The unit
1, 2, 3, 6, and 7 are touch sensors. Tap icons with your finger to control
functions.
1 z Turn the unit on/off (standby) ( p. 9).
2 y Switch the input source.
3 1, 2, 3, 4, 5 SCENE function ( p. 25)
4 Wireless charger ( p. 30)
5 SNOOZE/SLEEP ( p. 10, 26)
6 Control audio ( p. 11).
7 /Volume +/-
8 Display ( p. 6)
9 Disc slot ( p. 11)
0 = Eject a disc ( p. 11).
A Remote sensor ( p. 9)
B AUX jack (Mini jack input) ( p. 21)
C HEADPHONES jack
No sound is heard from the unit when the headphones are connected.
D Service jack
Use when the unit requires maintenance.
E USB jack ( p. 20)
F FM antenna ( p. 18)
FM/DAB antenna (Australia model only) ( p. 15)
G Power cord ( p. 9)
AUX HEADPHONES USB
5V
1.0A
1 762354
A809
BGCD FE
Top /front panels
Rear panel
6
Part names
Display
1 Bluetooth indicators ( p. 12)
2 App (Multimedia Music Controller app) indicator
The indicator is displayed when the app is in use.
3 Input source indicator
The selected input source is displayed.
4 Shuffle and repeat indicators ( p. 22)
5 Current time
6 Qi wireless charging indicator ( p. 30)
7 Alarm indicators ( p. 26)
8 Child lock indicator ( p. 29)
9 Sleep indicator ( p. 10)
0 Multi display
Displays a variety of information, including that for a song as it plays, radio
frequency, etc.
Some information may be cut off as there is a limit on the number of characters
that can be displayed.
Note
Display brightness can be adjusted as required.
• Auto (default setting; adjusted automatically in accordance with ambient lighting.)
• Manual (10 levels)
See “Adjusting display brightness (dimmer)” ( p. 31) to configure this function.
1 42 3 5 6
708 9
Part names
7
Remote control
1 Transmit infrared (IR) signals ( p. 9).
2 = Eject a disc ( p. 11).
3 Input source buttons ( p. 11)
Switch the input source.
4 SCENE function ( p. 25)
5 SHUFFLE/REPEAT ( p. 22)
6 /Volume +/-
7 Stop playback ( p. 11, 20).
8 Cursor control buttons ( p. 10)
9 OPTION ( p. 32)
0 ALARM ( p. 26)
A SNOOZE/SLEEP ( p. 10, 26)
B z Turn the unit on/off (standby) ( p. 9).
C RX/TX
Switch between receiving and transmitting audio
functions of Bluetooth.
(Receiving audio p. 12, transmitting audio
p. 13)
D Audio control buttons ( p. 11)
E Mute/unmute
F DISPLAY ( p. 23)
G SOUND MODE ( p. 24)
1
B
C
D
E
F
G
2
3
4
5
6
7
8
9
0
A
Battery
insulating
strip
Remove the battery insulating strip before
attempting to use the remote control.
Battery insulating
strip
8
Part names
Press the release tab firmly to the right and hold it there while slowly sliding the
battery holder out.
Replace the old battery with a new one.
Note
Replace the old battery with a new one when the remote control’s range becomes very short.
Replacing the remote control battery
Battery holder
Release tab
CR2025 Lithium battery
9
Preparation
Turn on the unit
1 Plug the power cord into an electrical outlet.
2 Press z to turn on the unit.
The display on the unit’s front panel will be turned on.
Auto power standby (default: ON)
The unit will automatically enter auto power standby mode to
reduce power consumption in any of the following situations:
• CD, BLUETOOTH, or USB is selected as the input source, but
no audio is played and no operations are performed for
more than 20 minutes.
• An input source other than any of those noted above is
selected, but no operations are performed for more than 8
hours.
See “Option settings” ( p. 32) to disable the auto power
standby function.
Eco standby (default: OFF)
Eco standby mode minimizes power consumption. The
following features are not available in eco standby mode.
• Bluetooth
• Qi/USB charging functions
See “Option settings” ( p. 32) to enable the eco standby
function.
Within 10 m
Reducing power consumption
With an advanced energy saving design, this
product achieves a low power consumption of
not more than 1.8 watts when in standby mode.
Preparation
10
Set the unit’s clock
1 Press OPTION.
The option menu is displayed.
2 Use e/r to select and press ENTER.
3 Use q/w to select Clock Setting and press
ENTER.
4 Use q/w/e/r to adjust the date and time.
5 Press ENTER to finalize and apply clock
settings.
Note
Press DISPLAY while setting the clock to switch between a 12- and
24-hour time.
Using the sleep timer
The unit automatically enters standby mode when the
specified time has elapsed. The time can be selected from 30,
60, 90, or 120 minutes, or the sleep timer can be disabled
(OFF).
Press SNOOZE/SLEEP.
The time selected changes each time SNOOZE/SLEEP is
pressed. The sleep indicator is displayed when the sleep timer
is set.
Note
To cancel the sleep timer, press SNOOZE/SLEEP.
CLOCK
Clock Setting (Year)
2020 June 26th 08:52AM
SAVE
11
Play from an input source
Listening to an audio CD
1 Press CD.
2 Insert a CD into the disc slot.
Music begins playing. Press = to eject a CD.
Audio control buttons
Note
• This unit supports playback of audio and data CDs to which MP3
and or WMA files have been recorded.
• Music files stored on a data CD can be played using the same
operations used to play music stored on a USB flash drive ( p. 20).
• This unit does not support 8-cm mini CDs. Do not insert an 8-cm
mini CD, or an adapter containing an 8-cm mini CD, into the disc
slot.
• If a CD that is not supported by the unit is inserted into the disc slot,
it may not be possible to eject the CD. See “Devices/media, and file
formats supported by the unit” for information on CDs supported
by the unit ( p. 41).
• When CD playback is stopped, playback will resume from the
beginning of the song last played. Pressing
s
while playback is
stopped will clear playback memory (resume playback feature).
• If the unit is turned off when CD has been selected as the input
source and a CD has been inserted into the disc slot, CD playback
will automatically begin the next time the unit is turned on.
ad
Play/pause
s
Stop
f
Skip to the beginning of the song being
played or previous song. Press and hold to
fast rewind.
g
Skip to the next song. Press and hold to fast
forward.
DISPLAY
Information about an audio CD being played
is displayed. ( p. 23)
SHUFFLE/
REPEAT
p. 22
=
Play from an input source
12
Listening to music via Bluetooth®
The unit can be used to play music from a Bluetooth device,
such as a mobile device or digital music player. In addition,
Bluetooth wireless headphones or speakers can be used to
listen to audio played via the unit.
For more information regarding Bluetooth, see
documentation provided with Bluetooth devices.
Note
• A Bluetooth device that transmits audio to the unit and Bluetooth
speakers /headphones that receive audio from the unit cannot be
connected at the same time.
• If a Bluetooth device has been connected before, the unit will
connect to the last connected device. Terminate this connection to
connect a new device.
• Press $ for at least three seconds to terminate the Bluetooth
connection on the unit.
Audio from a Bluetooth device can be played on the unit over
a wireless connection.
1 Enable the Bluetooth function of the
Bluetooth device.
2 Press $.
The unit’s input source is switched to Bluetooth.
3 Select this unit from the Bluetooth device
list on the Bluetooth device.
The Bluetooth indicators will be displayed once the
connection has been established.
4
Play a music file on the Bluetooth device.
Note
If a Bluetooth connection is not established, delete the unit’s
registration from the Bluetooth device, and then try to repeat
steps
2-3.
Listening to music from a Bluetooth
device (Receiving)
iPod touch
Bluetooth
Play from an input source
13
Bluetooth speakers or headphones can be used to listen to
audio played via the unit.
Note
• This function cannot be used when Bluetooth is selected as the
input source. Select an input source other than Bluetooth.
• Be sure to use Bluetooth speakers or headphone that are equipped
with a volume control. Volume must be adjusted using the
Bluetooth speakers or headphones. Volume cannot be adjusted
from this unit.
• Use the volume control on the Bluetooth speakers or headphones
to turn down the volume, and then connect the speakers or
headphones to the unit. Failure to turn down the volume before
connecting may result in extremely loud playback to begin when
the Bluetooth connection is established.
1 Set Bluetooth speakers or headphones to
pairing mode.
2 Press OPTION on the remote control.
3 Use e/r to select , and press ENTER.
4 Use q/w to select Bluetooth TX, and press
ENTER.
5 Use q/w to select ON, and press ENTER.
6 Press ENTER.
Bluetooth speakers or headphones that can be
connected to the unit will be detected and displayed.
Using Bluetooth speakers/headphones
to listen to audio (transmitting)
Bluetooth speakers or headphones
BLUETOOTH
BLUETOOTH Transmission
ON
Next
Play from an input source
14
7 Select the Bluetooth speakers or
headphones to be connected and press
ENTER.
The Bluetooth indicators will be displayed when the
Bluetooth connection is established.
8 Select an input source on the unit and play
audio from that source.
Note
• If a Bluetooth connection is not established, repeat the connection
procedure from step
1.
• If Bluetooth speakers or headphones have been previously
connected to the unit, the unit will connect to the last connected
device when RX/TX is pressed to apply TX (transmitting) mode.
• Audio is not output from the unit in TX (transmitting) mode.
• RX (receiving) mode is automatically applied when the unit is in
standby mode.
Play from an input source
15
Listening to DAB stations (Australia model only)
Press RADIO repeatedly to select DAB.
• Initial scan starts automatically when you select DAB for the
first time.
• When scanning is completed, the number of receivable DAB
stations is displayed momentarily, and the first station stored
is played.
1 Press RADIO repeatedly to select DAB.
When the unit cannot receive the DAB signal, “Off Air” is
displayed.
2 Press e or r to select a DAB station.
Note
• Initial scan can also be performed from the option settings.
1 Press OPTION when DAB is selected as the input source.
2Use e/r to select and press ENTER.
3Use q/w to select Initial Scan and press ENTER.
The initial scan display is shown.
4 Press ENTER to begin the initial scan.
“Completed!” is displayed when the initial scan is complete.
• If an initial scan is performed, stored DAB station information and
preset DAB stations are cleared.
• This unit can receive only Band III DAB frequencies.
Frequency in MHz/Channel label
Initial scan
Tuning in DAB stations
DAB
Play from an input source
16
Use the preset function to store your favorite 40 DAB stations.
1 Tune in to a DAB station ( p. 15).
2 Press and hold ENTER.
The preset setting is displayed.
3 Press q/w to select the required preset
number, and press ENTER.
To cancel the DAB preset setting, press
s
.
1 Press RADIO repeatedly to select DAB.
2 Press
f
/
g
to select a preset station.
Note
DAB station information shown in the display is switched in the
following order each time DISPLAY is pressed.
1 Press OPTION when DAB is selected as the
input source.
2 Use e/r to select and press ENTER.
3 Use q/w to select Preset Delete and press
ENTER.
4 Use q/w to select the preset number to be
deleted or ALL, and press ENTER.
A confirmation dialog is displayed. Press ENTER to delete
the preset station.
5 Press OPTION to exit the settings display.
Presetting DAB stations
Selecting preset DAB stations
DLS (Dynamic Label Segment) (default)
Ensemble Label
Channel Info (Channel label and frequency)
Signal Quality
Audio Format
Deleting a preset DAB station
DAB
Play from an input source
17
You can confirm the DAB signal level. This is useful when
setting up the antenna.
1 Press OPTION when DAB is selected as the
input source.
2 Use e/r to select and press ENTER.
3 Use q/w to select Tuning Aid and press
ENTER.
The Tuning Aid display is shown.
4 Press ENTER.
5 Press q/w to change the channel label.
The measured DAB signal reception level is displayed.
The level is from 0 (none) to 100 (best).
6 Press OPTION to exit the settings display.
Note
When the DAB signal is weak in Tuning Aid, try adjusting the position
of the antenna to obtain good reception.
Confirming the reception
DAB
DAB Tuning Aid
11B : 100%
Exit
Play from an input source
18
Listening to FM radio stations
Extend the antenna and position it for good FM reception.
1 Press RADIO.
2 Press and hold e or r.
Automatic tuning starts. Tuning will stop automatically
when a station is tuned in.
Note
If station reception is weak, tune in to a station manually by pressing
e/r repeatedly. Sound will be heard in monaural.
Auto preset
The unit tunes in stations with good reception and presets
them automatically.
1 Press RADIO.
2 Press OPTION.
3 Use e/r to select and press ENTER.
4 Use q/w to select Auto Preset and press
ENTER.
The auto preset display is shown.
5 Press ENTER to begin the auto preset.
“Completed!” is displayed when the auto preset is
complete.
Note
• Auto preset replaces all stations currently stored with new stations.
• Up to 40 FM stations can be preset.
• Press OPTION to cancel auto preset.
Tuning in to a station
87.50MHz
Presetting stations
FM
Play from an input source
19
Manual preset
1 Tune in to a station ( p. 18).
2 Press and hold ENTER.
The preset setting is displayed.
3 Press q/w to select the required preset
number, and press ENTER.
Note
Press
s
to cancel manual preset.
1 Press RADIO.
2 Press
f
/
g
to select a preset station.
1 Press RADIO.
2 Press OPTION.
3 Use e/r to select and press ENTER.
4 Use q/w to select Preset Delete and press
ENTER.
5 Use q/w to select the preset number to be
deleted or ALL, and press ENTER.
The confirmation dialog is displayed. Press ENTER to
delete the preset station.
6 Press OPTION to exit the settings display.
Preset Registration
P01 87.50MHz
Selecting a preset station
Deleting a preset station
FM
Play from an input source
20
Listening to music on USB flash drives
1 Press USB.
2 Connect a USB flash drive to the USB jack.
3 Play a song.
Use the following buttons to play a song.
Note
• Music files stored on USB flash drives can be played via the unit. See
“Devices/media, and file formats supported by the unit” for
information on USB flash drives supported by the unit ( p. 42).
• Some USB flash drives may not work properly even if they meet the
requirements. Playability of and power supply to all USB flash drives
are not guaranteed.
• Stop playback before disconnecting the USB flash drive.
• A USB flash drive is automatically charged as long as it is connected
to the unit except when the unit is in eco standby mode. However,
some devices may not charge when connected. See “Option
settings” to disable the charge function ( p. 32).
• Connect a USB flash drive directly to the USB jack of the unit. Do not
use extension cables.
q/w Select a folder.
f
Skip to the beginning of the song being
played or previous song. Press and hold to
fast rewind.
g
Skip to the next song. Press and hold to fast
forward.
ad
Play/pause
s
Stop
SHUFFLE/
REPEAT
p. 22
DISPLAY
Information about content being played is
displayed. ( p. 23)
AUX HEADPHONES USB
5V
1.0A
USB
5V
1.0A
Play from an input source
21
Listening to music from an external device
Music played on an external device connected to the AUX jack on the unit’s rear panel can be heard through this unit. See
documentation supplied with the external device for more information.
1 Unplug the power cord from the electrical
outlet, and connect the external device to
the unit.
Use cables sold separately for connections.
2 Plug the power cord into an electrical outlet,
and turn on the unit.
3 Press AUX.
4 Play the external device connected to the
unit.
Note
Lower the volume sufficiently on the unit and external device
before connection. Otherwise, the volume may be unexpectedly
loud when music begins playing.
AUX HEADPHONES USB
5V
1.0A
AUX
Stereo mini-plug cable
Portable music player
22
Useful features
Features such as shuffle and repeat playback, display of song information, and a SCENE function make this unit even more
convenient and enjoyable to use.
Shuffle/repeat playback
Press SHUFFLE or REPEAT during playback.
The indicators will change each time SHUFFLE or REPEAT is pressed, and songs will play as follows.
Shuffle playback
Shuffle
indicators
Media
Data CD/USB Audio CD
Shuffle all songs Shuffle all songs
Shuffle all songs in a
folder
Goes off
The shuffle function is
not applied.
The shuffle function is
not applied.
Repeat playback
Repeat
indicators
Media
Data CD/USB Audio CD
Repeat all songs Repeat all songs
Repeat all songs in a
folder
Repeat the song being
played.
Repeat the song being
played.
Goes off
The repeat function is
not applied.
The repeat function is
not applied.
Useful features
23
Playback information
While content from an audio CD, data CD or USB flash drive is
being played, information such as playing time can be shown
in the display.
Press DISPLAY during playback.
The display switches each time DISPLAY is pressed.
Audio CD
Data CD/USB
Note
Information such as the album title may not be properly displayed for
songs played from some types of media.
Display Information
PlayTime Playing time of the song
Track Remaining Time Remaining time of the song
Total Remaining Time Remaining time of the disc
Display Information
PlayTime Playing time of the file
Song Song name
Artist Artist name
Album Album name
File Name
Folder Name
Useful features
24
Adjusting sound quality
Adjust audio parameters as needed to suit individual preferences.
Adjust the level at which low, middle, and high tones are
output.
Note
Press OPTION to cancel setup before it is completed.
1 Press OPTION.
2 Use e/r to select and press ENTER.
3 Use q/w to select EQ Setting and press
ENTER.
4 Adjust low, middle, and high tones.
Use q/w to change the level. Use e/r to select
another tone. Press ENTER to complete setup.
Default: 0
Adjustable level: -10 to +10
5 Press OPTION to exit the settings display.
Two sound modes are available—Bass Boost and Standard.
• Bass Boost (default)
Best for music
• Standard
Best for human voices (talk radio, etc.)
Adjusting tones
AUDIO
EQ Low
L: 00 M: 00 H: 00
SAVE
Selecting the sound mode
Useful features
25
Registering favorites with SCENE
Favorite songs and radio stations can be assigned to the SCENE (1 to 5) buttons. Once registered, favorites can easily be selected for
listening.
Press and hold one of the SCENE buttons while
the input source to be registered is playing.
The song or radio station that is playing will be assigned to
that SCENE button.
Press the SCENE button to which a favorite song
or radio station has been assigned.
• The song or radio station assigned to that SCENE button will
play. When the SCENE button is pressed in standby mode,
the unit will be turned on and playback will begin.
• Individual songs stored on a Bluetooth or other external
device cannot be assigned to SCENE buttons. The Bluetooth
or other external device will be selected as the input source
by pressing the SCENE button to which it has been assigned.
Note
• When a favorite is registered with a SCENE button to which another
favorite was previously assigned, the new favorite will replace the
previous favorite.
• If a CD not registered with a SCENE button is placed in the unit, or a
USB flash drive not registered with a SCENE button is connected to
the unit, the first song on that CD or USB flash drive will play when a
SCENE button is pressed.
Registering favorites
Scene 1 has been saved
REGIST SCENE 1
Listening to favorites
26
Useful features
Alarm (IntelliAlarm)
Five alarm options—music, beeps, combination of music and beeps—are available. A CD, a USB flash drive, or a radio station can be selected as the source of music used as the alarm
(alarm source).
The following types of playback can be selected according to the alarm source.
Note
Be sure to place a CD in the unit, or connect a USB flash drive to the unit, when using either as the
alarm source. If the proper alarm source is not available, music will not play, and only beeps will
sound when the alarm is triggered.
Alarm type
Music only
(Source)
Music begins playing at the specified time.
Music begins playing at low volume one minute prior to the
specified time, increasing to the specified volume at the specified
time.
Music + beeps
(Source + BEEP)
Music begins playing at the specified time and beeps begin
sounding at the same time.
Music begins playing at low volume three minutes prior to the
specified time, increasing to the specified volume at the specified
time. Beeps begin sounding over the music at the specified time.
Beeps only (BEEP) Beeps begin sounding at the specified time.
Alarm sources (CD, USB flash drive, and radio station)
CD
• Specified song: Play the specified song repeatedly.
• Resume playback: Play from the last song played.
Note
“Resume playback” is applied to data CDs even when “Specified song” is
selected.
USB
• Specified song: Play the specified music file from the specified
folder repeatedly. Name the folder and file(s) as follows to use them
as alarm sources
Folder name: “ALARM”
File name: “01” to “99” (for example, when an mp3 file is named
“01”, the file name is “01.mp3”.)
Note
If the ALARM folder contains files of the same name but different
extensions, such as “01.mp3” and “01.wav”, the specific file to be
used cannot be selected.
• Resume playback: Play from the last music file played.
Radio station
• Specified radio station: Select from preset stations to play
( p. 16, 18).
• Resume playback: Play the radio station last received.
Useful features
27
1 Press ALARM.
The alarm setup display in the option settings is shown.
Note
Press OPTION to close the alarm display while setting the alarm.
2 Use q/w to select the alarm number (1 to
5).
3 Use r to move the cursor and then use q/
w to select ON.
4 Press ENTER.
5 Configure the alarm function.
Use q/w to select the item and then press ENTER to
complete setup.
1 Hour and minute
2 Alarm type ( p. 26)
3 Alarm source ( p. 26)
4 Playback type ( p. 26)
5 Repeat (Day of the week can be specified using the
Multimedia Music Controller app.)
6 Volume
6 Press OPTION to exit the settings display.
The alarm indicator is displayed.
Setting the alarm
5 OFF 13:00 Once
AM
AM
PM
1 7:00 Once
2 OFF 8:30 Once
ON
Useful features
28
1 Press ALARM.
The alarm display in the option settings is shown.
2 Use q/w to select the alarm number.
3 Use r to move the cursor and then use q/
w to select ON or OFF.
4 Press OPTION to exit the settings display.
When the alarm is turned on, the alarm indicator is
displayed.
Stop the alarm temporarily
Press SNOOZE/SLEEP while the alarm is sounding to stop the
alarm. The alarm stops temporarily and begins sounding again
five minutes later (snooze function).
Note
When Source + BEEP is selected as the alarm type, pressing
SNOOZE/SLEEP while the alarm is sounding will stop only the beeps.
Press SNOOZE/SLEEP again to stop the music as well. Note that the
alarm will sound again five minutes later.
Stop the alarm completely
Press and hold SNOOZE/SLEEP or press ALARM once while
the alarm is sounding to stop the alarm completely.
Note
If the alarm is not stopped manually, it will stop automatically after
60 minutes have passed.
Turning on and off the alarm Stop the alarm
Useful features
29
Child lock function
The child lock function disables operations from the controls
on the unit to prevent unintended or accidental operation.
This function is disabled by default. When the child lock
function is enabled, only the following functions can be
operated via the controls on the unit. Use the remote control
or app to operate other functions.
• turn on the unit/set the unit to standby mode
• stop the alarm
1 Press OPTION.
2 Use e/r to select and then press
ENTER.
3 Use q/w to select Child Lock and then
press ENTER.
4 Use q/w to select ON and then press
ENTER.
5 Press OPTION to exit the settings display.
The child lock indicator is displayed.
Note
• Press OPTION to cancel setup before it is completed.
• A CD can be inserted into the disc slot even when the child lock
function is enabled. Take all necessary precautions to prevent
children from inserting other objects into the disc slot.
Enabling/disabling the child lock
function
SYSTEM
3- 1 1:22
30
Useful features
Charging a mobile device (Qi)
A mobile device with the Qi icon can be charged with this unit. For more information
regarding the Qi charging function, see documentation provided with your mobile
device.
Note
The Qi charging function is not available in any of the following situations:
• The unit is in eco standby mode.
• The Qi function is disabled.
• Charge in Standby setting is disabled ( p. 33) and the unit is in standby mode.
Place the mobile device with its Qi icon facing down on the unit’s Qi
icon.
Charging status can be confirmed using the Qi charging indicator.
Note
• If charging does not begin, remove the device and place it on the Qi icon again.
• Remove any cover or case attached to the mobile device while charging. If a magnetic card or
smart card is positioned between the unit and the mobile device during charging, the
magnetic stripe or radio-frequency identification (RFID) chip used on some credit cards or
passports may be damaged.
• Charging may take longer at high ambient temperatures.
• If vibrations generated by audio output cause the mobile device to move, position the non-
skid pad (supplied) with the rough surface upward between the mobile device and the unit.
Do not place metallic objects, such as straps with metal components,
near the Qi icon. Failure to observe this precaution may result in a fire,
burn, or other injury.
Charging possible
Charging in progress
Charging complete
The indicator may not change to the charging complete indicator with
some devices, even when they are fully charged.
Charging failed
Be sure that no other objects are positioned near the Qi icon. If you have
confirmed that nothing is interfering with Qi function, see
“Troubleshooting” for more information ( p. 37).
Useful features
31
Adjusting display brightness (dimmer)
Display brightness can be adjusted automatically or manually.
1 Press OPTION.
2 Use e/r to select and then press
ENTER.
3 Use q/w to select Dimmer and then press
ENTER.
4 Use q/w to select Auto or Manual.
5 Use r to move to the parameter setting,
and use q/w to specify the level.
The following display is shown when Auto is selected.
(B-Lv: Bright level, D-Lv: Dark level)
6 Press ENTER to complete setup.
7 Press OPTION to exit the settings display.
Auto
The unit automatically selects brightness
for bright and dark levels in accordance
with ambient lighting. Brightness for both
levels can be fine-tuned. Higher values are
brighter.
Bright level options
5 to 9 (default: 7)
Dark level options
0 to 4 (default: 2)
Manual
Select the preferred brightness level from
10 options.
0 to 9 (default: 7)
SYSTEM
Dimmer Auto/Manual
Auto B-Lv:7 D-Lv:2
SAVE
Useful features
32
Option settings
Various settings can be configured using the option menu. See “Option menu list” on the next page for available options.
1 Press OPTION.
2 Use e/r to select a menu group and then
press ENTER.
3 Use q/w/e/r to select a setting and then
press ENTER.
Press OPTION to cancel setup before it is completed.
4 Press OPTION to exit the settings display.
Useful features
33
1)
Displayed only when the input source is FM
2)
Displayed only when the input source is DAB
Option menu list
Group Setting
Clock Setting ( p. 10)
Alarm Setting ( p. 26)
EQ Setting ( p. 24)
Sound Mode ( p. 24)
Bluetooth TX ( p. 13)
Dimmer ( p. 31)
Menu Language Select a display language.
Qi Function ( p. 30)
Standby Setting
Auto Power Standby ( p. 9)
ECO Standby Minimize power consumption ( p. 9)
Charge When this function is disabled, the Qi/USB charging function is not available (default: Enable) ( p. 30).
Child Lock ( p. 29)
Disc Manual Eject Eject the CD.
Initial Setting Restore the unit to factory default settings (changes to option settings will also be reset).
Firmware
Version Information Display the unit’s firmware version.
Firmware Update
Update the unit’s firmware. The latest firmware can be downloaded from the Yamaha website. See information provided when
updating firmware for details.
Auto Preset ( p. 18)
Preset Delete ( p. 19)
Initial Scan ( p. 15)
Tuning Aid ( p. 17)
Preset Delete ( p. 16)
OPTION
CLOCK
OPTION
AUDIO
OPTION
BLUETOOTH
OPTION
SYSTEM
OPTION
FM
1)
OPTION
DAB
2)
34
Troubleshooting
Refer to the table below if the unit fails to function properly. If the problem is not listed, or if the symptoms persist after following the instructions provided, turn off the unit,
disconnect the unit from the electrical outlet, and contact your nearest authorized Yamaha dealer or service center.
General
Problem Cause Solution
The unit turns off as soon as it is powered on.
The unit does not operate properly.
The power cable is not properly connected. Connect the power cable firmly.
The unit cannot be operated.
The internal microcomputer has frozen due to an external
electrical shock (lightning, excessive static electricity, etc.) or a
drop in power supply voltage.
Press and hold = on the unit for at least eight seconds. The unit
will be in standby mode.
No sound comes from the unit.
An input source has not been properly selected. Use the input source buttons to select an input source ( p. 7).
The volume level is set to the minimum level or volume is muted. Increase the volume.
The TX (transmitting) mode is applied to the Bluetooth function. Apply the RX (receiving) mode to the Bluetooth function ( p. 12).
The external device is not firmly connected to the AUX jack.
Confirm that the external device is firmly connected to the unit’s
jack. If there are no problems with connection, check that cables
may be damaged.
Noise is heard.
The audio cable used to connect the unit and external device may
be damaged.
Confirm the audio cable connection. If there are no problems with
connection, use another audio cable.
The unit suddenly turns off.
The sleep timer has been set ( p. 10).
Turn on the unit and play the source again.
The auto power standby function is activated. ( p. 9).
Breaks, distortion, or unusual noise can be
heard.
The volume (especially the bass) is too high. Decrease the volume, or adjust the bass ( p. 24).
Troubleshooting
35
The unit’s clock is reset. Power has not been supplied to the unit for more than one week.
If the power cord has been disconnected from the electrical outlet
for more than one week, the clock may be reset. Set the clock
again ( p. 10).
Interference from nearby electronic equipment
is producing noise.
The unit is too close to other electronic equipment. Position the unit farther away from other electronic equipment.
The remote control does not work or does not
function properly.
The remote control may be outside its operation range. Operate the remote control within its operation range ( p. 9).
The remote control sensor on this unit may be exposed to direct
sunlight or strong lighting such as an inverter type fluorescent
lamp.
Change the orientation of lighting or the unit, or location of the
unit.
The battery may be worn out. Replace the battery (CR2025) with a new one ( p. 8).
There are obstacles between the sensor of this unit and the
remote control.
Remove the obstacles.
The touch sensors on the unit cannot be
operated.
The child lock function is enabled. Disable the child lock function ( p. 29).
Objects have been placed on the touch sensors. Do not place objects on the touch sensors.
Problem Cause Solution
Troubleshooting
36
Bluetooth
Problem Cause Solution
Unable to connect the unit to a Bluetooth
device.
The unit is already connected to another Bluetooth device.
Terminate the current Bluetooth connection, and then connect to
the new device.
The unit and the Bluetooth device are too far apart. Move the Bluetooth device closer to the unit.
A device that operates in the 2.4 GHz-band (microwave oven,
wireless network device, etc.) is interfering with wireless
communication.
Move the unit and Bluetooth device farther away from the device.
If the wireless LAN router supports the 5 GHz-band, connect
network devices to the network using the 5 GHz-band.
The passkey for devices such as a Bluetooth adapter is not “0000”. Use a Bluetooth device with a passkey of “0000.”
The Bluetooth device does not support the Advanced Audio
Distribution Profile (A2DP).
Use a Bluetooth device that supports A2DP.
No sound is played, or sound is interrupted
during playback.
The volume level on the Bluetooth device is set too low. Increase the volume on the Bluetooth device.
The Bluetooth device is not configured to transmit audio signal to
this unit.
On the Bluetooth device, select this unit as the audio output
destination.
The Bluetooth connection has been terminated. Establish the Bluetooth connection again ( p. 12).
A device that operates in the 2.4 GHz band (microwave oven,
wireless network device, etc.) is interfering with wireless
communication.
Move the unit and Bluetooth device farther away from the device.
If the wireless LAN router supports the 5 GHz band, connect
network devices to the network using the 5 GHz band.
The unit and the Bluetooth device are too far apart. Move the Bluetooth device closer to the unit.
Troubleshooting
37
Disc
Qi
Problem Cause Solution
Playback does not start after a disc is inserted.
Some functions are not available.
The unit does not support the disc inserted. Use a disc that is supported by the unit ( p. 41).
Playback does not start (or stops immediately)
when
a
/
d
is pressed.
The disc may be dirty. Wipe the disc clean ( p. 41).
The unit does not support the disc inserted. Use a disc that is supported by the unit ( p. 41).
If the unit was moved from a cold to warm place, condensation
may have formed on the disc reading lens.
Wait for an hour or two until the unit adjusts to the room
temperature, and try again.
The CD is not ejected when = is pressed.
Use Disc Manual Eject in the option settings to eject the disc
( p. 33).
Problem Cause Solution
The unit stops charging.
Objects are positioned near the Qi icon. Remove the objects.
The unit will temporarily stop charging when it or the mobile
device becomes too hot.
Charging will resume once the temperature of the unit or mobile
device has dropped to an acceptable temperature.
Troubleshooting
38
USB flash drive
DAB reception (Australia model only)
Problem Cause Solution
The unit does not detect the USB flash drive.
The USB flash drive is not connected to the USB jack securely.
Turn off the unit, reconnect your USB flash drive, and turn the unit
on again ( p. 20).
A USB flash drive in a format other than FAT16/32 format is used. Use a USB flash drive with FAT16 or FAT32 format.
Folders and files in the USB flash drive cannot be
viewed.
The data in the USB flash drive is protected by encryption. Use a USB flash drive without an encryption function.
Playback does not begin, or playback stops at
the beginning.
The music file is not supported by the unit. Confirm the file formats that are supported by the unit ( p. 42).
Problem Cause Solution
Cannot tune in to any DAB stations. The initial scan operations were not performed. Perform the initial scan operations ( p. 15).
The initial scan operations are not successful and
Not Found is displayed.
The DAB signals are too weak.
Use the Tuning Aid feature to conform the best position of the
antenna ( p. 17).
The positioning of the antenna is not optimal for DAB reception.
There is no DAB coverage in your area.
Check with your dealer or WorldDMB online at
http://www.worlddab.org for a listing of the DAB coverage in your
area.
There is noise interference (e.g. hiss, crackle or
jitter).
The antenna needs to be repositioned. Readjust the position of the antenna.
The DAB signals are too weak.
Use the Tuning Aid feature to conform the best position of the
antenna ( p. 17).
The DAB station information is not shown or is
inaccurate.
The DAB station may be temporarily out of service, or the DAB
station information is not provided by the DAB broadcaster.
Contact the DAB broadcaster.
Troubleshooting
39
FM reception
Problem Cause Solution
FM stereo reception is noisy.
The radio station you selected may be far from your area, or the
antenna input is poor.
Change the height or direction of the antenna, or change the
position of the unit.
Automatic tuning does not work.
The radio station you selected may be far from your area, or the
antenna input is poor.
Change the height or direction of the antenna, or change the
position of the unit.
Tune in to a station manually ( p. 18).
Cannot select a preset radio station. The preset stations may have been erased. Preset radio stations again ( p. 18).
There is distortion, and clear reception
cannot be obtained.
Multipath reflection or other radio interference may be occurring.
Change the height or direction of the antenna, or change the
position of the unit.
Qi charging is interfering with radio reception. Disable the Qi charging function ( p. 33).
40
Messages in the display
Message Description Solution
No Disc
The disc inserted in the unit may not be supported. Use the disc supported by the unit ( p. 41).
The disc may be dirty, or foreign matter may be attached to it. Wipe the disc clean. Alternatively, remove foreign matter adhered to the disc.
Reading The unit is reading the specified file/content. Wait until the unit finishes reading.
Unknown Disc
Disc is set upside-down. Set the disc with the labeled side facing up.
A disc that is not recognized by the unit has been inserted. Confirm that the disc is supported by the unit ( p. 41).
Unknown Media
A disc or USB flash drive that is not recognized by the unit has been
inserted or connected.
Confirm that the disc or USB flash drive is supported by the unit ( p. 41).
Invalid Disc
No Files A disc or USB flash drive does not contain files supported by the unit. Use the disc or USB flash drive that contains files supported by the unit ( p. 41).
Read Error The unit failed to read the specified file/content.
Eject the disc or disconnect the USB flash drive, and then insert the disc or
connect the USB flash drive again.
Not Connected The Bluetooth connection is not established. Confirm the Bluetooth connection.
41
Devices/media, and file formats supported by the unit
Devices/media
• This unit is compatible with USB flash drives that are in FAT16 or FAT32 format. Do
not connect any other type of USB flash drives.
• USB flash drives with encryption cannot be used.
• Operation of all USB flash drives cannot be guaranteed.
Yamaha and suppliers do not accept any liability for the loss of data saved on a USB
flash drive connected to the unit. As a precaution, it is recommended to make backup
copies of important files.
• This unit is designed for use with audio CD, CD-R/RW (ISO 9660 format) with any of
the following logos printed on the disc or the disc jacket.
Notes on discs
• Do not use any other type of disc other than stated above. Doing so may damage
the unit.
• CD-R/RW cannot be played back unless finalized. Finalization means the process for
making a disc to be ready for playback on a compatible device.
• Some discs cannot be played back depending on the disc characteristics or
recording conditions.
• Do not use any non-standard shaped discs such as a heart-shaped disc.
• Do not use discs with many scratches or a crack on their surface, or warped/glued
discs.
• Do not touch the surface of the disc. Hold a disc by its edge or
center hole.
• Use a soft-tipped pen when writing on the label side of a disc.
• Do not use a disc to which tape, stickers, or labels have been
affixed. Discs with any of these inserted into the unit may not be
ejected.
• Do not use a protective cover to prevent scratches.
• Do not insert any object other than a disc into the unit.
• Do not insert more than one disc into the unit at one time. This could cause damage
to both this unit and the discs.
• If a disc becomes dirty, wipe it with a clean, dry soft cloth from
the center out to the edge. Do not use record cleaner or paint
thinner.
• Do not use any lens cleaners as they may cause malfunction.
• Do not expose discs to direct sunlight, high temperature, high
humidity, or dust.
• When a disc is not being used, remove it from this unit and store in an appropriate
case.
USB flash drives
Discs
Audio CD CD-R/RW*
* Discs which bear one of the following.
FOR CONSUMER
FOR CONSUMER USE
FOR MUSIC USE ONLY
42
File format
* Linear PCM format only
** Some music files and content utilizing certain compression ratios may not play
properly.
Digital Rights Management (DRM) files cannot be played back.
USB
Format
Sampling
frequency (kHz)
Quantization
bits (bit)
Bitrate (kbps)
Number of
channels
WAV
*
32/44.1/48/88.2/
96/176.4/192
16/24 - 2
MP3 32/44.1/48 - 8-320 2
WMA 32/44.1/48 - 8-320 2
MPEG-4 AAC-LC 32/44.1/48 - 8-320 2
FLAC
32/44.1/48/88.2/
96/176.4/192**
16/24 - 2
ALAC 32/44.1/48 16/24 - 2
AIFF
32/44.1/48/88.2/
96/176.4/192
16/24 - 2
CD
Format
Sampling
frequency (kHz)
Quantization
bits (bit)
Bitrate (kbps)
Number of
channels
MP3 32/44.1/48 16 8-320 2
WMA 32/44.1/48 16 8-320 2
43
Specifications
The contents of this manual apply to the latest specifications as of the publishing date.
To obtain the latest manual, access the Yamaha website then download the manual
file.
Input
AUX 3.5 mm stereo mini jack
Output
HEADPHONES 3.5 mm stereo mini jack
USB
Audio format MP3, WMA, AAC, WAV, FLAC, ALAC, AIFF
CD
Laser
Type Semiconductor laser GaAs/GaAlAs
Wave length 775 to 780 nm
Output power 4 mW
Media* CD, CD-R/RW
Audio format Audio CD, MP3, WMA
* An 8-cm mini CD is not available.
Bluetooth
Bluetooth version Ver. 4.2
Supported profile
A2DP (sink and source functions)
AVRCP
Compatible codecs SBC, AAC (sink function only)
Maximum communication range 10 m (33 ft) (without interference)
Bluetooth output Class 1
Tuner
Tuning range FM
Canada model: 87.5 MHz to 107.9 MHz
Other models: 87.5 MHz to 108.0 MHz
DAB (Australia model only)
Tuning range DAB 174 MHz to 240 MHz (Band III)
Amplifier section
Maximum
output power
Speakers
25 W + 25 W (6 Ω, 1 kHz, 10 % THD)
Headphones 20 mW + 20 mW (16 to 32 Ω, 1 kHz, 10 % THD)
Wireless Charge
Standard Qi certified
General
Power supply
Voltage/
frequency
Canada model: AC 120 V, 60 Hz
Australia model: AC 220 to 240 V, 50 Hz
Asia model: AC 100 to 240 V, 50/60 Hz
Taiwan model: AC 110 to 220 V, 50/60 Hz
China model: AC 220 V, 50 Hz
Korea model: AC 220 V, 60 Hz
Power consumption 42 W
Standby power consumption
Eco Standby (enabled): 0.9 W or less (Option
settings: Dimmer level 7)
Eco Standby (disabled): 1.8 W or less (Option
settings: Dimmer level 7, Charge disabled)
Dimensions (W × H × D)
370 × 111 × 252 mm
(14-5/8 × 4-3/8 × 9-7/8 inch)
Weight 4.2 kg (9.3 lbs.)
44
Specifications
Yamaha Eco-Label is a mark that certifies products of high environmental
performance.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other
trademarks and trade names are those of their respective owners.
The ‘Qi’ symbol is a trademark of the Wireless Power Consortium.
Australia model only
45
Software licenses
This product uses the following software.
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined
by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is
granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are
controlled by, or are under common control with that entity. For the purposes of this definition,
"control" means (i) the power, direct or indirect, to cause the direction or management of such
entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this
License.
"Source" form shall mean the preferred form for making modifications, including but not limited to
software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a
Source form, including but not limited to compiled object code, generated documentation, and
conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made available
under the License, as indicated by a copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or
derived from) the Work and for which the editorial revisions, annotations, elaborations, or other
modifications represent, as a whole, an original work of authorship. For the purposes of this
License, Derivative Works shall not include works that remain separable from, or merely link (or
bind by name) to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and
any modifications or additions to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal
Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition,
"submitted" means any form of electronic, verbal, or written communication sent to the Licensor or
its representatives, including but not limited to communication on electronic mailing lists, source
code control systems, and issue tracking systems that are managed by, or on behalf of, the
Licensor for the purpose of discussing and improving the Work, but excluding communication that
is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a
Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a
Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform,
sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made, use, offer to sell, sell, import,
and otherwise transfer the Work, where such license applies only to those patent claims
licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by
combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If
You institute patent litigation against any entity (including a cross-claim or counterclaim in a
lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or
contributory patent infringement, then any patent licenses granted to You under this License for
that Work shall terminate as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof
in any medium, with or without modifications, and in Source or Object form, provided that You
meet the following conditions:
(a)You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b)You must cause any modified files to carry prominent notices stating that You changed the files;
and
(c)You must retain, in the Source form of any Derivative Works that You distribute, all copyright,
patent, trademark, and attribution notices from the Source form of the Work, excluding those
notices that do not pertain to any part of the Derivative Works; and
(d)If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works
that You distribute must include a readable copy of the attribution notices contained within such
NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in
at least one of the following places: within a NOTICE text file distributed as part of the
Derivative Works; within the Source form or documentation, if provided along with the
Derivative Works; or, within a display generated by the Derivative Works, if and wherever such
third-party notices normally appear. The contents of the NOTICE file are for informational
purposes only and do not modify the License. You may add Your own attribution notices within
Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the
Work, provided that such additional attribution notices cannot be construed as modifying the
License.
You may add Your own copyright statement to Your modifications and may provide additional or
different license terms and conditions for use, reproduction, or distribution of Your modifications,
or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of
the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally
submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions
of this License, without any additional terms or conditions. Notwithstanding the above, nothing
herein shall supersede or modify the terms of any separate license agreement you may have
executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service
marks, or product names of the Licensor, except as required for reasonable and customary use in
describing the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor
provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including,
without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT,
MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible
for determining the appropriateness of using or redistributing the Work and assume any risks
associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence),
contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent
acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any
direct, indirect, special, incidental, or consequential damages of any character arising as a result
of this License or out of the use or inability to use the Work (including but not limited to damages
for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other
commercial damages or losses), even if such Contributor has been advised of the possibility of
such damages.
46
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works
thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty,
indemnity, or other liability obligations and/or rights consistent with this License. However, in
accepting such obligations, You may act only on Your own behalf and on Your sole responsibility,
not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each
Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by
reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
FLAC
Copyright © 2000–2009 Josh Coalson
Copyright © 2011–2016 Xiph.Org Foundation
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
AV18-0100
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650 Japan
Yamaha Global Site
https://www.yamaha.com/
Yamaha Downloads
https://download.yamaha.com/
Manual Development Group
© 2020 Yamaha Corporation
Published 04/2020
KSOD-A0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47

Yamaha TSX-B237 El manual del propietario

TSX-B237
Yamaha
Marca
Yamaha
Modelo
TSX-B237
Tipo
El manual del propietario
Descargar PDF
informe

En otros idiomas

Documentos relacionados

Otros documentos