Funai MWC13D5df Manual de usuario

Categoría
Televisores CRT
Tipo
Manual de usuario
COLOR TV/DVD
MWC13D5 A (13 inch)
OWNER’S
MANUAL
If you need additional assistance for set-up or operating after
reading owner’s manual, please call TOLL FREE : 1-800-605-8610.
Or visit our WEB SITE at http://www.funai-corp.com
Please read before using this equipment
INSTRUCCIONES
EN ESPAÑOL INCLUIDAS.
SUPPLIED ACCESSORIES
BatteriesRemote Control Unit
2 AA BatteriesNE239UD
Owners Manual
1EMN20257
Owner's Manual
2
EN
1.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.
2.Retain Instructions-The safety and operating instructions
should be retained for future reference.
3.Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All operating and use instructions
should be followed.
5.Cleaning-Unplug unit from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possi-
bility of the loss of an authorization code for a CATV con-
verter, is not intended to be unplugged by the user for clean-
ing or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description other-
wise required in item 5.
6.Attachments-Do not use attachments not recommended by
the unit manufacturer as they may cause hazards.
7.Water and Moisture-Do not use this unit near water-for
example, near a bath tub, wash bowl, kitchen sink, or laun-
dry tub, in a wet basement, or near a swimming pool, and
the like.
8.Accessories-Do not place this unit on an unstable cart,
stand, tripod, bracket, or table. The unit may fall, causing
serious injury to someone, and serious damage to the appli-
ance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the unit.
Any mounting of the appliance
should follow the manufacturers
instructions and should use a mount-
ing accessory recommended by the
manufacturer. An appliance and cart
combination should be moved with
care.
Quick stops, excessive force, and
uneven surfaces may cause the appli-
ance and cart combination to over-
turn.
Accessoires- Ne placez pas cette unit sur une table
roulante, un support, un trépied, une console ou une table
instable. Cette unit risquerait de tomber, pouvant gravement
blesser quelqu'un et l'appareil même pourrait être sérieuse-
ment endommagé. N'utilisez qu'une table roulante, un sup-
port, un trépied, une console ou une table recommandé par
le fabriquant, ou vendu avec la unit. Pour n'importe quelle
installation de l'appareil, on devra suivre les instructions du
fabriquant et l'on devra utiliser les accessoires d'installation
recommandés par le fabriquant. L'ensemble combiné de
l'appareil avec une table roulante devra être déplacé avec
précaution. Des arrêts brusques, une force excessive et des
surfaces inégales peuvent provoquer le renversement de
l'ensemble combiné de l'appareil/table roulante.
9. Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating, and
these openings must not be blocked or covered. The open-
ings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be
placed near or over a radiator or heat register. This unit
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturers instructions have been adhered to.
10.Power Sources-This unit should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, con-
sult your appliance dealer or local power company. For
units intended to operate from battery power, or other
sources, refer to the operating instructions.
11.Grounding or Polarization-This unit is equipped with a
polarized alternating-current line plug(a plug having one
blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try revers-
ing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
PORTABLE CART WARNING
AVERTISSEMENT POUR UNE
TABLE ROULANTE PORTATIVE
S3126A
IMPORTANT SAFEGUARDS
The caution marking is located on the rear of the cabinet.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS
IN THE LITERATURE
ACCOMPANYING THE APPLIANCE.
3
EN
GROUND CLAMPS
NEC - NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
S2898A
WIRE
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRODE SYSTEM
(NEC ART 250, PART H)
SERVICE
EQUIPMENT
CLAMP
ANTENNA
LEAD IN
ANTENNA
POWER SERVICE GROUNDING
GROUND
ELECTRIC
FIGURE A
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying par-
ticular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the unit, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding con-
ductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode. (Fig. A)
14.Lightning-For added protection for this unit receiver dur-
ing a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the unit due to lightning and power-line
surges.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never push objects of any kind
into this unit through openings as they may touch danger-
ous voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the
unit.
18.Servicing-Do not attempt to service this unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
19.Damage Requiring Service-Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the
unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the oper-
ating instructions. Adjust only those controls that are cov-
ered by the operating instructions, as improper adjustment
of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the unit to its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance-
this indicates a need for service.
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same character-
istics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other haz-
ards.
21.Safety Check-Upon completion of any service or repairs to
this unit, ask the service technician to perform routine safe-
ty checks to determine that the unit is in proper operating
condition.
22.Heat-This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
4
EN
RADIO-TV INTERFERENCE
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV
technician for help.
FCC WARNING- This equipment may gener-
ate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction man-
ual. The user could lose the authority to oper-
ate this equipment if an unauthorized change
or modification is made.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public
performance and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
LASER SAFETY
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to ser-
vice this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUST-
MENTS OR PERFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est con-
forme à la norme NMB-003 du Canada.
PRECAUTIONS
The serial number of this product may be found on the back of the unit. No other unit has the same serial
number as yours. You should record the number and other vital information here and retain this book as a per-
manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
A NOTE ABOUT RECYCLING
Batteries should never be thrown away or inciner-
ated but disposed of in accordance with your local
regulations concerning chemical wastes.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
5
EN
AV OID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
LOCATION
For safe operation and satisfactory performance of
your unit, keep the following in mind when selecting
a place for its installation:
Shield it from direct sunlight and keep it away from
sources of intense heat.
Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top bottom of the unit. Do not place the unit on a
carpet because this will block the ventilation holes.
Install unit in a horizontal position.
Avoid locations subject to strong vibration.
Do not place the unit near strong magnetic fields.
Avoid moving unit to locations where temperature
differences are extreme.
Be sure to remove a disc and unplug the AC power
cord from the out put before carrying the unit.
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.
If by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Do not put your fingers or objects into the unit disc
loading tray.
Do not place anything directly on top of the unit.
WARNING
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a unit which has
moisture, it may damage the DVD and unit.
Therefore when the condensation occurs inside the
unit, turn POWER on and allow at least 2 hours for
the unit to dry out.
The following symbols below appear in some head-
ings and notes in this manual, with the following
meanings
: Description refers to TV operation (in the TV mode).
: Description refers to playback of DVD-Video discs
(in the DVD mode).
: Description refers to playback of Audio CDs
(in the DVD mode).
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
QUICK
CD
DVD-V
TV
SYMBOLS USED IN THIS MANUAL
6
EN
TABLE OF CONTENTS
C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2
C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SYMBOLS USED IN THIS MANUAL . . . . . . .5
C TABLE OF CONTENTS . . . . . . . . . . . . . . . . . .6
C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
C
OPERATING CONTROLS AND FUNCTIONS
. . .8
INSTALLING THE BATTERIES . . . . . . . . . . .9
C PREPARATION FOR USE . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTIONS . . . . . . .10
CONNECTING TO EXTERNAL INPUT JACKS
.
11
CONNECTING TO AN AMPLIFIER
EQUIPPED WITH DIGITAL INPUT JACKS,
MD DECK OR DAT DECK (for DVD only) . .11
CONNECTING TO A DOLBY DIGITAL
DECODER (for DVD) . . . . . . . . . . . . . . . . . . .12
TV SECTION
C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .13
SELECTING THE LANGUAGE . . . . . . . . . . .13
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . .13
DELETING (OR ADDING) CHANNEL(S) . . .14
C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .15
WATCHING A TV PROGRAM . . . . . . . . . . . .15
DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .15
PICTURE CONTROL . . . . . . . . . . . . . . . . . . .15
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .16
CLOSED CAPTION SYSTEM . . . . . . . . . . . .16
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .17
TV RATING SET UP . . . . . . . . . . . . . . . . . .17
MPAA RATING SET UP . . . . . . . . . . . . . . . .18
CHANGE ACCESS CODE . . . . . . . . . . . . . .18
DVD SECTION
C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .19
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .19
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . .19
C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .20
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .20
GENERAL FEATURES . . . . . . . . . . . . . . . . . .20
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .20
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .20
RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
STEP BY STEP PLAYBACK . . . . . . . . . . . . .21
FAST FORWARD / FAST REVERSE . . . . . . .21
SLOW FORWARD / SLOW REVERSE . . . . .21
C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .22
TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .22
TITLE / CHAPTER SEARCH . . . . . . . . . . . . .22
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .22
MARKER SETUP SCREEN . . . . . . . . . . . . . .22
C SPECIAL PLAYBACK FUNCTION . . . . . . . .23
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23
RANDOM PLAYBACK . . . . . . . . . . . . . . . . .23
C CHANGING THE SETTINGS . . . . . . . . . . . .24
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .24
AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .24
STEREO SOUND MODE . . . . . . . . . . . . . . . .24
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .25
BLACK LEVEL SETTING . . . . . . . . . . . . . . .25
VIRTUAL SURROUND . . . . . . . . . . . . . . . . .25
C THE ON-SCREEN INFORMATION . . . . . . .26
C CHANGING THE DVD SETUP ITEMS . . . .27
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . .27
LANGUAGE SETTING . . . . . . . . . . . . . . . .27
DISPLAY SETTING . . . . . . . . . . . . . . . . . . .28
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . .28
PARENTAL CONTROL . . . . . . . . . . . . . . . .29
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . .29
C TROUBLESHOOTING GUIDE . . . . . . . . . . .30
C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .32
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .32
C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .33
C ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover
7
EN
TV Mode
DVD Mode
¡Dolby Digital sound
This unit can handle Dolby Digital surround sound having
5.1 channels when connected to a Dolby Digital decoder.
¡Still/fast/slow/step playback
Various playback modes are available including still pic-
tures, fast forward/reverse, slow motion and step frames.
¡Random playback for Audio CD
This unit can shuffle the order of tracks to play them in
random order.
¡Program playback for Audio CD
You can program the order of tracks to play them in any
desired order.
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Screen saver/Auto power-off functions
The screen saver program starts when there is no input
from the unit for 5 minutes in the stop mode. When the
screen saver program is activated for 15 minutes, the
power is automatically turned off.
¡Subtitles in a desired language
You can select a desired language for the display subtitles,
if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle, if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and sound mode,
if different languages and modes are available on a disc.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs
This unit automatically detects if the loaded disc is DVD,
Audio CD on disc.
¡On-screen display
Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.
¡Search
Chapter search / Title search / Track search / Time search
¡Repeat
Chapter / Title / Track / All / A-B
¡Marker
The part designated by user can be called back.
¡Resume Play
User can resume to playback from the part at which the
play was stopped.
¡Virtual Surround
¡Bit rate indication
¡DRC (Dynamic range control)
You can control the range of sound volume.
181 channel capability PLL frequency synthesiz-
er tuner with direct station call
(A converter may be necessary to view scrambled cable
channels.)
Infrared remote control
Trilingual on screen menu display selectable in
English, Spanish or French
¡Sleep Timer
The Sleep Timer function enables you to shut off the power
without hitting
[STANDBY-ON] after a desired time peri-
od.
¡Closed Caption Decoder
You may view specially labeled (cc) TV programs, movies,
news, etc. with either a dialogue caption or text display
added to the program.
¡Auto Shut Off Function
If there is no air signal input from the antenna terminal and
no operation for 15 minutes, the unit will turn itself off
automatically.
¡V-CHIP
Enables parents to prevent their children from watching
inappropriate material on TV.
FEATURES
8
EN
7. Remote Sensor Window
8. C STOP Button [page 21]
Stops operation of the disc.
9.H PREV Button [page 22]
Plays back from the beginning of the current
chapter or track.
h SEARCH Button (Front Panel)
[page 21]
During playback or in the pause mode, press and
hold button down
for a few seconds to change
reverse playback speed.
10.
BB
PLAY Button [page 20]
Starts playback of the disc contents.
Hit to change to DVD mode when TV mode.
11. NEXT G Button [page 22]
Plays back from the beginning of the next chapter
or track.
SEARCH g Button (Front Panel)
[page 21]
During playback or in the pause mode, press and
hold button down
for a few seconds to change for-
ward playback speed.
12. PAUSE F Button [page 21]
Pauses the current disc operation.
13.
AA
OPEN/CLOSE Button [page 20]
Hit to insert a disc into or remove it from the tray.
14. HEADPHONE Jack
To connect headphone (not supplied) for personal
listening.
15. MODE Button [pages 23-24]
Activates program playback or random playback
mode when playing CDs.
16. Number Buttons
TV Mode:
[page 14]
Hit two digits to directly access the desired channel.
Remember to hit
[0] before a single digit channel.
+100 Button
Hit to select cable channels which are higher than 99.
DVD Mode: [page 22]
Hit to enter the desired number.
+10 Button
Hit to enter the desired numbers which are higher
than 9.
STANDBY-ON
L
VOLUME
KL
CHANNEL
K
H
PREV NEXT
GB
PLAY
F
PAUSE
C
STOP
A
OPEN/CLOSE
HEADPHONE
VIDEO
L
AUDIO
R
E
SEARCH
D
12 4 56 107 98313141211
26
27
16
17
9
11
12
23
20
22
15
25
24
21
10
28
29
30
33
35
5
6
13
34
19
18
8
31
32
4
36
SLOW
PLAY
STOP
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
REPEAT
A
-
B
REPEAT
SEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
PREV NEXT
SELECT
STANDBY-ON
PICTURE
OPEN/CLOSE
CH.
VOL.
MUTE
V.SURR
SLEEP
123
456
789
0 +10
+100
OPERATING CONTROLS AND FUNCTIONS
FRONT PANEL
REMOTE CONTROL
[Fig. 2]
[Fig. 1]
1. Disc loading tray
2. VIDEO input Jack [page 11]
Connect to the video output jack of a video
camera or VCR.
3. AUDIO L/R input Jacks [page 11]
Connect to the audio output jacks of a video
camera or VCR.
4. STANDBY-ON Button [page 13]
Hit to turn the power on and off.
5. VOLUME (VOL.) K / L Buttons [page 15]
Press to control the volume level for the DVD and TV.
6. CHANNEL (CH.) K / L Buttons [page 15]
Press to select memorized channel.
Press to change to TV mode when DVD mode.
9
EN
COAXIAL
ANT.
3938
37
32. K / L / { / B Buttons
TV Mode:
[page 13]
Hit to select a setting mode from the menu on the
TV screen.
Hit to select or adjust from a particular menu.
DVD Mode: [page 20]
Press to select a menu item.
33. DISC MENU Button [page 20]
Displays the menus in the DVD.
34. SELECT Button [page 20]
Hit to change to TV mode, external input mode or
DVD mode.
35. MUTE Button [page 16]
Hit to turn off the sound portion of the TV program.
(Volume level display turns LIGHT RED from
LIGHT BLUE.) Hit it again or hit
[VOL. K / L] to
restore sound.
36. PICTURE Button [page 15]
Hit to enter picture adjustment mode.
37. Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to
a standard AC outlet.
38. COAXIAL Jack (DVD Audio Only)
[pages 11, 12]
Connect to the digital input of an external
amplifier or decoder.
39. ANT(ENNA). Jack
Connect to an antenna, cable system or satellite sys-
tem.
NOTE: When you select the DVD mode by this
button, press [PLAYB ] or [OPEN/CLOSE A]
first. Otherwise, the DVD features are not
operated.
17. SLEEP Button [page 16]
Hit to display the sleep timer and start the function.
The shut off time can be determined by the number
of times you hit this button. (0, 30, 60, 90 or 120
minutes)
18. h Button [page 21]
Hit to fast reverse the Disc. Hit [PAUSE F], then hit
this button to begin slow motion playback. Hit this
button repeatedly to change the reverse speed of
slow motion.
g Button [page 21]
Hit to fast forward the Disc. Hit [PAUSE F], then
hit this button to begin slow motion playback. Hit
this button repeatedly to change the forward speed
of slow motion.
19. V.SURR (VIRTUAL SURROUND) Button
[page 25]
Hit to set virtual surround on/off.
20. SETUP Button [pages 13, 27-29]
Hit to enter or exit the setup menu of TV or DVD.
21. TITLE Button [page 20]
Displays the title menu.
22. CLEAR Button [pages 22-23]
Resets a setting.
23. DISPLAY Button
TV Mode:
Hit to display the channel number on the screen. If
you hit it again, the channel number will disappear.
DVD Mode: [page 26]
Displays the current status on the TV screen.
24. SEARCH MODE Button [page 22]
Hit to locate a desired point.
25. AUDIO Button [page 24]
Hit to select a desired audio language or sound
mode.
26. SUBTITLE Button [page 24]
Hit to select a desired subtitle language.
27. REPEAT Button [page 23]
Repeats playback of the current disc, title, chapter
or track.
28. ANGLE Button [page 25]
Hit to change the camera angle to see the sequence
being played back from a different angle (if avail-
able).
29. REPEAT A-B Button [page 23]
Repeats playback of a selected section.
30. RETURN Button [page 22]
Returns to the previous screen in the setup menu.
31. ENTER Button [pages 13, 20]
Hit to accept a setting.
REAR VIEW
[Fig. 3]
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
NOTES:
¡Do not mix alkaline and manganese batteries.
¡Do not mix old and new batteries.
10
EN
NOTE:
Before plugging the antenna into the ANT. jack of the unit, check that the
pin is not bent. If it is bent, straighten the pin as illustrated, then plug the
pin into the ANT. jack of the unit.
PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
CABLE WITH CONVERTER/DESCRAM-
BLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown here.
Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the TV/ DVD Remote Control.
TO VIEW A SCRAMBLED/UNSCRAMBLED
CHANNEL
1.Set the unit channel selector to the output channel
of the Cable Converter Box or Satellite Box. (Ex.
CH3)
2.Select the channel to view on your Cable Converter
Box or Satellite Box.
Bent pin
Cable
Plug
(Needs to be straightened)
(Straight pin)
COAXIAL
ANT.
ANT.
IN
OUT
VHF/UHF Antenna
(Not supplied)
VHF/UHF
Combiner
(Not supplied)
Flat twin-lead cable
UHF Antenna
(Not supplied)
VHF Antenna
(Not supplied)
From
Cable System
75-ohm Coaxial
Cable (Not supplied)
Satellite Box or
Cable Box
(Not supplied)
From Cable System or
Satellite Dish
or
or
or
[Fig. 4]
VHF/UHF COMBINED ANTENNA
A VHF UHF 75 ohm combination antenna can be
connected to ANT. jack of the unit.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects
directly to your unit without a converter box. Use the
TV/ DVD Remote Control to select channels.
Note to CATV system installer:
This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connect-
ed to the grounding system of the building as close to the point of cable entry as practical.
NOTE:
For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. jack
before moving the unit.
11
EN
CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on another
source (VCR or video camera), use the audio/video
input jacks on the front of the unit.
Connect the audio/video output
jacks of another source to the
AUDIO L/R and VIDEO jacks of
this unit.
Then hit [SELECT] until
"AUX" appears on the screen.
NOTE:
When you connect a monaural VCR (another
source) to this unit, connect the Audio output jack
of the monaural VCR (another source) to the
AUDIO L jack of this unit. The audio will output in
both L and R channel equally.
STANDBY-ON
VIDEO
L
AUDIO
R
VIDEO
L
AUDIO
R
[Another source]
To the
audio out-
put jacks
Audio/Video
cables
(not supplied)
etc.
To the video
output jack
[Front of the unit]
AUX
[Fig. 5]
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD only)
Use an audio coaxial digital cable (commercially available) for the audio connections.
NOTES:
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
Be sure to turn off the power to all components in the system before connecting another component.
Refer to the Owner's Manuals for the components to be connected to the unit.
Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a unit using incorrect settings
may generate noise distortion and may also damage the speakers. (See page 28 to set DOLBY DIGITAL to
OFF.)
COAXIAL
ANT.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
Audio coaxial digital
cable
(commercially available)
To C OAXIAL jack
(Only DVD AUDIO OUT)
To Coaxial digital
Audio input jack
[Fig. 6]
12
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a
DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the unit up to a Dolby
Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround
sound as enjoyed in movie theaters.
Use audio coaxial digital cables (commercially available) for the audio connections.
NOTES:
Be sure to turn off the power to all components in the system before connecting another component.
Refer to the Owner's Manuals for the components to be connected to the unit.
If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
(See page 28 to set DOLBY DIGITAL to ON.)
Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup
mode. Playing a unit using incorrect settings may generate noise distortion and may also damage the speak-
ers.
COAXIAL
ANT.
Front speaker
(left)
Center
speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
To COAXIAL jack
(Only DVD AUDIO OUT)
To Coaxial digital
Audio input jack
Dolby Digital decoder
Audio coaxial digital cable
(commercially available)
[Fig. 7]
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
EN
13
EN
SELECTING THE LANGUAGE
1 Plug in the unit power cord
Plug the unit power cord into a standard
AC outlet.
NOTE:
If any digits appear in the corner of
the screen, hit [STANDBY-ON] with-
out unplugging the power cord.
Make sure ...
Hit [STANDBY-ON] to turn on the unit.
NOTE:
This function effects only the language on the
screen menu and not the audio source.
2 Select “LANGUAGE”
Hit [SETUP] on the remote control.
Press
[
KK
/
LL
] to point to “LAN-
GUAGE”.
3 Select “ENGLISH”, “ESPAÑOL” or “FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French using [ENTER].
4 Exit the Language mode
Hit [SETUP] to return to TV mode.
NOTE: If for some reason the menu is in Spanish or
French, press [
KK
/
LL
] to point to “IDIOMA
[ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then
hit [ENTER], then hit [SETUP] on the remote con-
trol.
TV
CHANNEL SET UP
Make sure ...
The unit must be turned on.
AUTO CHANNEL PROGRAMMING
As the initial setting, this unit has memorized all
channels, including the ones not available in your
area. This feature automatically puts only available
channels into the memory.
1 Select “CHANNEL SET UP”
Hit [SETUP] on the remote control.
Press
[
KK
/
LL
] to point to “CHAN-
NEL SET UP”.
Then hit
[ENTER].
2 Begin auto ch programming
Press [
KK
/
LL
] to point to “AUTO
CH PROGRAMMING”.
Then hit
[ENTER].
The tuner scans and memorizes all
the active channels in your area.
3 After scanning
The tuner stops on the lowest memorized channel.
When AUTO CH PROGRAM-
MING is activated where there is
no TV signal input, “NO TV SIG-
NALS” will appear on the display
after the completion of the chan-
nel scanning.
The unit may recognize CATV channels to be TV
channels by the receiving conditions. In this case,
try auto ch programming again in the fine receiv-
ing conditions.
Channel memory programming is NOT neces-
sary when connected to a cable box or satellite
box. Just select the channel for cable or satellite
input (Ex CH3) on this unit, then select your
desired channel on the cable box or satellite box.
SET UP FOR USE
TV SECTION
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
- TV SETUP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO CH PROGRAMMING
NO TV SIGNALS
TV
14
EN
DELETING (OR ADDING)
CHANNEL(S)
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
1 Select “CHANNEL SET UP”
Hit [SETUP] on the remote control.
Press
[
KK
/
LL
] to point to “CHAN-
NEL SET UP”.
Then hit
[ENTER].
2 Select “ADD/DELETE CH”
Press [
KK
/
LL
] to point to
“ADD/DELETE CH”.
Hit
[ENTER].
3 Enter the desired channel number
Press [
KK
/
LL
] until your desired
channel number appears. (You can
also press the Number buttons or
[CH.
KK
/
LL
] to enter it) (Example:
CH8)
You must precede single-digit
channel numbers with a zero (Example: 02 ... 09).
When selecting cable channels which are higher
than 99, hit [+100] first, then hit the last two digits.
(Example: to select channel 125, first hit [+100],
then press [2] and [5]).
4 Delete (or add) it from (or into) memory
Hit [ENTER]. The channel number changes to light
red. The channel is deleted from memory.
To delete another channel, repeat steps
3
to
4
.
If you hit [ENTER] again, the channel is memo-
rized again.
5 Exit the channel setup mode
Hit [SETUP] to return to TV mode.
NOTE: To confirm that channel(s) has been deleted
or added, press [CH.
KK
/
LL
].
TV
- TV SETUP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Added channel: Light blue.
Deleted channel: Light red.
08
ADD / DELETE
– CHANNEL SET UP –
B ADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
15
EN
DEGAUSSING
Magnetism from nearby appliances and speakers
might affect the color of the TV picture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, disconnect
power
cord from AC outlet then reconnect it after
30 minutes.
WATCHING A TV PROGRAM
1 Turn on the unit
Hit [STANDBY-ON] to turn on the unit.
2 Select the channel number
Press [CH.
KK
/
LL
] to select your desired channel
number or press the Number buttons.
Notes for using the Number buttons on the remote
control:
You must precede single-digit channel numbers
with a zero (Example: 02 ... 09).
When selecting cable channels which are higher
than 99, hit [+100] first, then press the last two dig-
its. (Example: to select channel 125, first hit
[+100], then press [2] and [5]).
NOTE:
¡If the unit is connected to a cable box or satellite
box, the unit must be on CH3 or CH4, then the
channel to be viewed must be selected on the cable
box or satellite box.
3 Adjust sound
Press [VOL.
KK
/
LL
] to adjust the
volume.
NOTE:
If you press [CH.
KK
/
LL
] in the DVD mode, you
can change the TV channels.
Even if you turn off the unit in the DVD mode,
when you turn it on again, it will go into the TV
mode.
TV
sB
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
PICTURE CONTROL
The unit’s picture controls – BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a more natural looking image.
Make sure ...
unit power must be turned on.
1 Select “PICTURE CONTROL
Hit [PICTURE] on the remote control.
2 Select item you want to adjust
Press [
KK
/
LL
] until desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
3 Adjust the picture control
Press [
ss
/
BB
] to adjust to your desired level within 5
seconds.
NOTE:
At step 3, the picture adjustment display will dis-
appear from the TV screen after about 5 seconds
unless you press any buttons, even though you may
not be finished. In this case, repeat from step 1.
TV
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
VOLUME 20
C C C C C C C C C C C C C C C C
BRIGHT
PP PP PP PP PP PP PP CC PP PP PP PP PP PP PP
+
TV OPERATION
16
EN
CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TV programs,
movies, news, etc. with either a dialogue caption or
text display.
CAPTION mode: By choosing the caption mode, you
can watch dramas, movies and news while captioning
the dialogues and the contents of news.
TEXT mode: By choosing the text mode, you can
watch half screen text information if you want.
1-2: You may get these captions or text information
by selecting either “1” or “2”. Caption “2” is used,
usually for a second language if available.
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:
Automobile ignition noise
Electric motor brush noise
Weak snowy reception on TV screen
Multiplex signal reception displaying picture
ghosts or airplane flutter.
TV
NOTE:
If the unit displays a black box on
the TV screen, this means that the
unit is set to the TEXT mode. To
clear screen, select [CAPTION1],
[CAPTION2] or [OFF].
Make sure ...
unit power must be turned on.
1 Select “CAPTION”
Hit [SETUP] on the remote control.
Press
[
KK
/
LL
] to point to “CAP-
TION”.
2 Select your desired caption menu
Hit [ENTER] until your desired caption menu
appears.
([CAPTION1], [CAPTION2],
[TEXT1] or [TEXT2])
3 Exit the caption setting mode
Hit [SETUP] to return to TV mode.
NOTE:
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
TO CANCEL THE CLOSED CAPTION
SYSTEM
Repeat steps
1
to
2
, and select [OFF] with
[ENTER]. Hit [SETUP] on the remote control to
return to TV mode.
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [CAPTION1]
The Sleep Timer function enables you to shut off the
power without hitting [STANDBY-ON] after a
desired time period.
1 Set “SLEEP TIMER”
Hit [SLEEP] on the remote control.
You may change the sleep time
with hitting [SLEEP] repeatedly.
The timer is set up to 120 minutes,
30 minutes each time
[SLEEP] is
pressed.
NOTES:
When you disconnect the unit from the AC outlet, or if
you have a power failure, the sleep time will be lost.
To view the time left for sleep timer, hit [SLEEP]
once when SLEEP display disappears. After 10
seconds, display will disappear again.
To cancel the sleep timer:
Hit [SLEEP] repeatedly until “SLEEP 0 MINUTE”
is displayed.
TV
SLEEP 120 MINUTE
SLEEP TIMER
17
EN
V-CHIP enables parents to prevent their children
from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except
for news and sports programs, unedited movies on
premium cable channels and Emergency Broadcast
System signals), then denies access to programming
if the program’s rating meets the limitations you
select. In this case, “PROTECTED PROGRAM by
...” message appears on the TV screen.
To block ratings, follow the steps below.
Programming may be rated by the Motion Picture
Association of America (MPAA) or according to
the Television Parental Guidelines. In order to
block any inappropriate programming, set your
limits in both places (MPAA RATING and TV
RATING).
V-CHIP SET UP
Make sure ...
The unit must be turned on.
1 Select “V-CHIP SET UP”
Hit [SETUP].
Press
[K / L] to select “V-CHIP
SET UP”, then hit [ENTER].
2 Enter Access code
Press the Number buttons to
enter the access code.
For the first time set-up or in
the event the unit has lost
power, enter the default code of 0000.
3 Select the desired item
Press [K / L] to select “TV RATING”, “MPAA
RATING” or “CHANGE CODE”, then hit [ENTER].
Refer to the pages below to set up each item.
TV RATING SET UP
Follow steps
1
to
3
in the “V-CHIP SET UP” sec-
tion above.
4 Blocking TV programs
Press [K / L] to select a rating
that you wish to block.
Hit
[ENTER] repeatedly to set it
to [BLOCK] or [VIEW].
TV
V-CHIP SET UP
Selection Rating Category Explanations
TV-Y Appropriate for all children
TV-Y7 Appropriate for children seven and older
TV-G General Audience
TV-PG Parental Guidance suggested.
TV-14 Unsuitable for children under 14
TV-MA Mature audience only
A
A
B
C
P17 Step
4
P18 Step
4
P18 Step
4
NOTE:
When you select a rating and set it
to [BLOCK], the higher ratings
will be blocked automatically. The
lower ratings will be available for
viewing.
When you set the lowest rating to
[VIEW], all other ratings will automatically be
available for viewing.
5 Setting “Sub-Ratings”
When you select the ratings of TV-
Y7, TV-PG, TV-14 or TV-MA you
will have the option of setting sub
rating categories.
Press
[K / L] to select a rating with
sub-ratings you wish to block, then
hit [ENTER] twice.
Press
[K / L] to select a sub-rating,
then hit [ENTER] to set it to
[BLOCK] or [VIEW].
NOTE:
The blocked sub-ratings will
appear next to the rating category
in the “TV RATING” menu.
6 Exit the V-Chip setting mode
Hit [SETUP] to exit the menu.
NOTE:
To change the rating, the TV must
be turned to an unprotected pro-
gram. If “PROTECTED PRO-
GRAM by ...” appears on the screen, please change
the channel to a station that is not protected.
TV–Y [VIEW]
TV–Y7 ( ) [VIEW]
TV–G [VIEW]
B TV–PG (DLSV) [BLOCK]
TV–14 (DLSV) [BLOCK]
TV–MA ( LSV ) [BLOCK]
TV–Y7 [BLOCK]
B FV [BLOCK]
TV–PG [BLOCK]
B D[BLOCK]
L[BLOCK]
S[BLOCK]
V[BLOCK]
Selection Rating Category Explanations
TV-Y7
FV Fantasy Violence
TV-PG, TV-14, TV-MA
D Suggestive Dialog
(TV-PG, TV-14 only)
L Coarse Language
S Sexual Situation
VViolence
TV–Y [VIEW]
B TV–Y7 ( ) [VIEW]
TV–G [VIEW]
TV–PG ( ) [VIEW]
TV–14 ( ) [VIEW]
TV–MA ( ) [VIEW]
PROTECTED PROGRAM
by TV-Y
TV–Y [VIEW]
TV–Y7 ( ) [VIEW]
B TV–G [BLOCK]
TV–PG (DLSV) [BLOCK]
TV–14 (DLSV) [BLOCK]
TV–MA ( LSV) [BLOCK]
- TV SETUP -
CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ACCESS CODE
_ _ _ _
– V-CHIP SET UP –
B TV RATING
MPAA RATING
CHANGE CODE
B TV–Y [VIEW]
TV–Y7 ( ) [VIEW]
TV–G [VIEW]
TV–PG ( ) [VIEW]
TV–14 ( ) [VIEW]
TV–MA ( ) [VIEW]
18
EN
MPAA RATING SET UP
Follow steps
1
to
3
in the “V-CHIP SET UP” section
on page 17.
4 Select your desired item
Press [K / L] to point to your
desired item, then hit
[ENTER] to
select [BLOCK] or [VIEW].
When you select a rating and set it to [BLOCK],
the higher ratings will be blocked automatically.
The lower ratings will be available for viewing.
When you set the lowest rating to [VIEW], all
other ratings will automatically be available for
viewing.
5 Exit the V-Chip setting mode
Hit [SETUP] to exit the menu.
Selection Rating Category Explanations
G General Audience
PG Parental Guidance suggested.
PG-13 Unsuitable for children under 13
R Restricted; under 17 requires accompa-
nying parent or adult guardian
NC-17 No one under 17 admitted
X Mature audience only
B
CHANGE ACCESS CODE
Follow steps
1
to
3
in the “V-CHIP SET UP” sec-
tion on page 17.
4 Enter New code
Press the Number buttons to
enter your desired access code in
the “NEW CODE” space, then
enter the same code in the “CON-
FIRM CODE” space. When com-
pleted, the menu will return to “V-CHIP SET UP”.
Make sure you enter exactly the same new code in
the “CONFIRM CODE” space as one in the
“NEW CODE” space. If they are different, the
“NEW CODE” space is cleared for redoing.
5 Exit the V-Chip setting mode
Hit [SETUP] to exit the menu.
NOTE:
Your personal access code will be erased and will
return to the default (0000) when a power failure
occurs or when you turn off the power using a
wall switch. If you have forgotten the code, unplug
the power cord for 10 seconds to restore the access
code to 0000.
C
G[VIEW]
PG [VIEW]
PG–13 [VIEW]
B R[BLOCK]
NC–17 [BLOCK]
X[BLOCK]
NEW CODE
_ _ _ _
CONFIRM CODE
_ _ _ _
19
EN
DVD SECTION
ABOUT THE DISCS
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2:
Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*6: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all or
normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with
the DVD recorder. Refer to the manual accompanying the DVD recorder.
*7: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may not be smooth, etc.).
*8: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may not
play back properly.
*9:
Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly.
*10: The number inside the symbol refers to a region of the world and a disc encoded in a specific region for-
mat can only be played back on unit with the same region code.
:
This label indicates playback compatibility with DVD-RW discs recorded in VR mode (Video Recording Format)
NOTE:
This player cannot play the DVD-RW that supports CPRM (Contents Protection for Recordable Media).
This player cannot play the DVD-R discs recorded in VR mode (Video Recording Format).
DVD-Video
* 1,2,3,10
* 1,3,4,5,7,8,9
* 1,3,4,5,6
8,9
* 3,5
* 3,4,5,8,9
or
DVD-RW
DVD-R
DVD+RW
DVD+R
Audio CD
CD-RW
CD-R
Digital video
(MPEG2)
-
-
-
Digital audio
Region code
Mark (logo)
Playable
discs
Recorded
signals
Disc size
Disc types
12 cm
or
8cm
12 cm
or
8cm
Example
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 1
Chapter 2
Chapter 3 Chapter 4
Example
Tr ack 1
Tr ack 2
Tr ack 5
Tr ack 6
Tr ack 3
Tr ack 4
Audio CD
¡
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3
¡
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
¡
Any other discs without compatibility indications
PLAYABLE DISCS
UNPLAYABLE DISCS
is a trademark of DVD Format/Logo Licensing Corporation.
20
EN
BASIC PLAYBACK
Getting started
¡Turn on the power of amplifier and any other com-
ponents, if necessary.
1 Hit [STANDBY-ON].
¡The power will turn on.
2 Hit [OPEN/CLOSE A] to open disc loading
tray.
3 Place the chosen disc in the tray, with the
label facing up.
CD
DVD-V
PLAYING A DISC
4 Hit [PLAY
BB
].
¡The tray will close automatically and playback will
then start from the first chapter or track of the disc.
If the playback does not start automatically, hit
[PLAY
BB
].
¡When you playback a DVD which features a title
menu, it may appear on the screen. In this case, refer
to “TITLE MENU”.
5 Hit [STOP C] to stop playback.
NOTES:
¡When the DVD mode has been switched to the TV
mode, the DVD mode shuts down first and then the
TV picture and sound appears in about 4 seconds.
Similarly, when [STANDBY-ON] is pressed to turn
off in the DVD mode, this mode shuts down first and
then the unit’s power is turned off.
¡A “prohibited icon” may appear at
the top-right on the TV screen dur-
ing operation, warning that a pro-
hibited operation has been encoun-
tered by the DVD or the disc.
¡With DVDs that use titles for playback program sig-
nals, playback may start from the second title or it
may skip these titles.
¡During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal-
function.
GENERAL FEATURES
DVD may contain menus to navigate the disc and access
special features. Press appropriate the Number buttons
or [
KK
/
LL
/
ss
/
BB
]
to highlight your selection in the
DVD main menu and hit [ENTER] to confirm.
NOTES:
¡Select DVD mode by hitting [SELECT] on the
remote control. Then hit [PLAY
BB
] or
[OPEN/CLOSE
AA
] before you operate the DVD
functions.
¡Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
DVD-V
TITLE MENU
1 Hit [TITLE] on the remote control.
¡The title menu will appear.
2 If the feature is not available, symbol
may appear on the TV screen.
3 Press [
KK
/
LL
/
ss
/
BB
] to select an item and
hit [ENTER] to confirm selection.
DVD-V
DISC MENU
1 Hit [DISC MENU] on the remote control.
¡The DVD main menu will appear.
2 If the feature is not available, symbol
may appear on the TV screen.
3 If disc menu is available on the disc, audio
language, subtitle options, chapters for the
title and other options will appear for selec-
tion.
4 Press [
KK
/
LL
/
ss
/
BB
] to select an item and
hit [ENTER] to confirm selection.
DVD-V
CALLING UP A MENU SCREEN
DURING PLAYBACK
¡Hit [DISC MENU] to call up the DVD menu.
¡Hit [TITLE] to call up the title menu.
NOTE:
¡Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
21
EN
STEP BY STEP PLAYBACK
1 During playback, hit [PAUSE
F
].
¡Playback will pause and sound will be muted.
2 The disc goes forward by one frame each
time [PAUSE
F
] is pressed.
3 To exit step by step playback, hit [PLAY
BB
].
DVD-V
RESUME
1 During playback, hit [STOP C].
¡Resume message will appear on the TV screen.
2 Hit [PLAY
BB
], playback will resume from the
point at which playback was stopped.
¡To cancel resume, hit [STOP C] twice.
¡If unit is turned off, resume function will be can-
celled.
CD
DVD-V
PAUSE
1 During playback, hit [PAUSE
F
].
¡Playback will pause and sound will be muted.
2 To continue playback, hit [PLAY B].
CD
DVD-V
1 During playback, press [g] or
[
h].
¡g 1” or “h 1” appears on the screen.
2 To select another speed, repeat step 2 until
your required speed appears on the screen.
¡For DVDs, fast forward/reverse search speed is dif-
ferent depending on the disc. Approximate speed is
1 (×2), 2 (×8), 3 (×50) and 4 (×100).
¡For Audio CDs, approximate speed is ×16.
¡When you press buttons on the front panel, press and
hold [SEARCH
hh
/
gg
] for a few seconds.
3 To return to normal playback, hit [PLAY
BB
].
CD
DVD-V
FAST FORWARD /
FAST REVERSE
SLOW FORWARD /
SLOW REVERSE
1 During playback, hit [PAUSE F].
2 Press [g] or [h].
¡ 1” or “ 1” appears on the screen.
3 To select another speed, repeat step 2 until
your required speed appears on the screen.
¡Slow forward or reverse speed varies with the disc.
Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).
¡When you press buttons on the front panel, press
and hold [SEARCH
hh
/
gg
] for a few seconds.
4 To return to normal playback, hit [PLAY B].
DVD-V
22
EN
TRACK SEARCH
There are three ways to begin playback on an Audio
CD at a specific track.
Using the Number buttons on the remote control
1 Press the Number buttons to enter the
desired track number.
¡Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number
(eg. track 3, hit [3]).
¡To play track 26, hit [+10], [2], [6].
Using [SEARCH MODE]
1 Hit [SEARCH MODE].
¡The Track search display appears.
2 Within 30 seconds, select a desired track
number using the Number buttons.
¡For single digits hit [0] first, if the total track of the
disc is more than 10.
¡Playback will start at the selected track.
Using [PREV
H
]
or
[
NEXT
G
]
During playback, hit [NEXT G] to move the next
track. Hit it repeatedly to skip subsequent tracks. Hit
[PREV H] to go back to beginning of the current
track. Hit it repeatedly to go to the previous tracks.
¡If [PREV H ] or [NEXT G] is pressed while the
playback is paused, the playback will be paused
again after skipping to the next track.
NOTE:
¡[PREV H ] and [NEXT G] are not operative
when playback is stopped.
CD
TITLE / CHAPTER SEARCH
1 Hit [SEARCH MODE] once for the Chapter
search, twice for the Title search during
playback.
2 Enter the desired chapter/title number using
the Number buttons.
¡Playback will start at the selected chapter or title.
¡Hit [CLEAR] to erase the incorrect input.
¡For single digits hit [0] first, if the total chapter or
title of the disc is more than 10.
DVD-V
_/2
TIME SEARCH
1 During playback, hit [SEARCH MODE] three
times (CD: twice) to display the Time Search
on the TV screen.
2 Within 30 seconds, enter a desired disc
time using the Number buttons.
¡Playback will start at the specified time.
¡Hit [CLEAR] to erase the incorrect input.
¡When there is no need to enter a number, “0”
appears automatically. For example, “ 0 : 0
-
:
- -
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
CD
DVD-V
SEARCH FUNCTION
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a
disc.
1 Hit [SEARCH MODE] four times (CD: three
times) during playback.
¡The display screen and Markers will appear on the
TV screen.
2 Press [s / B] to select 1, 2, 3, 4, 5, 6, 7, 8, 9,
or 10 and ensure that
- - - -
:
- -
:
- -
appears in the display.
3 When you reach the desired point, hit
[ENTER].
¡The title or track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, hit [SEARCH
MODE] four times (CD: three times) during
playback and [
ss
/
BB
] to choose the desired
marker, then hit [ENTER].
NOTES:
¡Opening the disc tray, turning off the power hitting
[SELECT], or selecting AC at step 2 and hitting
[ENTER] will erase all Markers.
¡To clear a marker, press [
ss
/
BB
]
to select the cur-
sor on to the marker number to be cleared and hit
[CLEAR].
¡You can mark up to 10 points.
5 Press [SEARCH MODE] or [RETURN] to
exit.
CD
DVD-V
23
EN
REPEAT
REPEAT TITLE / CHAPTER
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
DVD-V
REPEAT is available only during playback.
CHAPTER TITLE OFF
(current chapter repeat) (current title repeat)
(repeat
off)
NOTES:
¡Repeat Title/Chapter is not available with some
scenes.
¡The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
CD
TRACK ALL OFF
(current track repeat) (entire disc repeat)
(repeat
off)
NOTES:
¡Repeat setting will be cleared when moving to other
track.
¡Repeat playback does not function during repeat A-
B playback.
REPEAT A-B
1 Hit [REPEAT A-B] at your chosen starting
point.
¡ A-” appears briefly on the TV screen.
2 Hit [REPEAT A-B] again at your chosen end
point.
¡ A-B” appears briefly on the TV screen, and the
repeat sequence begins.
3 To exit the sequence, hit [REPEAT A-B].
NOTES:
¡The repeat A-B section can only be set within the
current title (for DVDs) or current track (for Audio
CDs).
¡Repeat A-B is not available with some scenes in DVD.
¡To cancel the A point which was set, hit [CLEAR].
¡Repeat A-B playback does not function during title,
chapter, track or all repeat playback.
CD
DVD-V
PROGRAM
You may determine the order in which tracks will play.
1 In stop mode, hit [MODE].
¡The PROGRAM screen will appear.
2 Press [
KK
/
LL
] to select a track, then hit
[ENTER].
¡Hit [CLEAR] to erase the
most recently entered pro-
gram.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4
Hit [PLAY
BB
] to play the programmed tracks.
NOTES:
¡While the program is being played back, the STOP
works as follows.
¡Hit [STOP C] once and then [PLAY B] again,
playback will restart from the point where [STOP
C] was pressed. (Program continued)
¡Hit [STOP
CC
] twice and then [PLAY B] again,
playback will restart from the track in the usual way.
(Program canceled)
¡Up to 99 programs can be entered.
¡To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
¡If you like to repeat the current track in the program,
hit [REPEAT] repeatedly until “ TRACK”
appears during playback. If you like to repeat the
entire program hit [REPEAT] repeatedly until “
ALL” appears during playback.
CD
RANDOM PLAYBACK
This shuffles the playing order of tracks instead of
playback in the sequence.
1 In stop mode, hit [MODE] twice.
¡RANDOM screen appears.
2 Hit [PLAY
BB
] to start random playback.
NOTE:
¡If you like to repeat the current track in the random
selection, hit [REPEAT] repeatedly until “
TRACK” appears during playback. If you like to
repeat the entire random selection hit [REPEAT]
repeatedly until “ ALL” appears during playback.
CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
SPECIAL PLAYBACK FUNCTION
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
TOTAL
24
EN
AUDIO LANGUAGE
The unit allows you to select a language during DVD
disc (if multi languages are available) playback.
1 Hit [AUDIO] during playback.
2 Hit [AUDIO] repeatedly to select your
desired language.
NOTE:
¡Hitting [AUDIO] may not work on some DVDs
with multiple audio languages (e.g. DVDs which
allow audio language setting on the disc menu).
DVD-V
STEREO SOUND MODE
1 Hit [AUDIO] repeatedly during playback to
select between STEREO, L-CH or R-CH.
¡STEREO - both right and left
channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
NOTE:
¡If the Virtual Surround setting is ON, the sound
mode will be fixed to STEREO and can not be
changed.
CD
The unit allows you to select a language for subtitles
during DVD disc (if available) playback.
1 Hit [SUBTITLE] during playback.
¡The subtitle language will be
displayed on the display bar at
the top of the screen.
2 Hit [SUBTITLE] repeatedly to select your
desired subtitle language.
3 To turn off subtitles, hit [SUBTITLE] repeat-
edly until OFF appears.
NOTES:
¡Hitting [SUBTITLE] may not work on some DVDs
with multiple subtitle languages. In this case, set it
on the disc menu. (Operation varies between discs.
Refer to the manual of the disc.)
¡If the desired language is not shown after hitting
[SUBTITLE] several times, the disc does not have
subtitles in that language.
¡When “NOT AVAILABLE”
appears on the TV screen, it
means no subtitle is recorded
on the scene.
¡If you choose a Language that has a 3 letter language
code, the code will be displayed every time you
change the Subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead.
(Refer to page 27.)
DVD-V
SUBTITLE LANGUAGE
CHANGING THE SETTINGS
1.ENG/6
1.ENG Dolby D 3/2.1ch 48k/3
STEREO
NOT AVAILABLE
25
EN
CAMERA ANGLE
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the ( ) icon appears on the
screen.
1 Hit [ANGLE] during playback.
¡If the “ANGLE ICON”
setting is “OFF” in the
“DISPLAY” menu, the ( )
icon will not appear. (Refer to page 28.)
2 Hit [ANGLE] repeatedly to select your
desired angle.
¡The selected angle will be displayed on the display
bar at the top of the screen.
DVD-V
Adjust the Black Level Settings to make the black
parts of the picture brighter.
1 Hit [MODE] during playback.
2 Hit [ENTER] to switch ON/OFF.
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
3 Press [MODE] twice or [RETURN] to exit.
NOTE:
¡The setting will be saved even if the unit is turned
off.
DVD-V
BLACK LEVEL SETTING
You can enjoy surround-sound effect over two speak-
ers on this unit.
1 Press [V.SURR] once or [MODE] twice
(CD: once) during playback.
2 Hit [ENTER] to set it 1 (Natural effect) or 2
(Emphasized effect) or OFF.
3 Press [V.SURR] or [MODE] to exit.
¡You can also exit the menu by hitting [RETURN].
NOTE (for CD play only):
¡Virtual Surround will not be effective if the sound
mode is set to something other than STEREO.
CD
DVD-V
VIRTUAL SURROUND
OFF
OFF
1 / 8
26
EN
For DVD-Vs
1 Hit [DISPLAY] during playback to show cur-
rent Chapter.
¡The elapsed and remaining
playing time of the current
chapter will be displayed.
2
Hit [DISPLAY] again to show current Title.
¡The elapsed and remaining
playing time of the current
title will be displayed.
3 Hit [DISPLAY] again.
¡The bit rate and the current
repeat setting will be dis-
played.
¡If you are playing a dual lay-
ered disc, the layer number will also be displayed
(L0: Layer 0 is playing. L1: Layer 1 is playing).
4 Hit [DISPLAY] again to exit.
THE ON-SCREEN INFORMATION
For Audio CDs
1 Hit [DISPLAY] during playback to show the
current Track.
¡The elapsed and remaining playing time of the cur-
rent track will be displayed.
2 Hit [DISPLAY] again to show current Total
Track.
¡The elapsed and remaining playing time of the total
track will be displayed.
3 Hit [DISPLAY] again to exit.
NOTE:
¡When you are playing a disc in PROGRAM or
RANDOM mode, PROGRAM (or RANDOM)
will be displayed at step 2.
You can check the information about the current disc by hitting [DISPLAY].
CD
DVD-V
9/49 0:00:00 -0:03:30
4/12 0:03:21 - 0:02:15
T
4/12 0:13:45 - 0:45:40
T
1/3 0:00:00 - 1:23:45
TL1
PROGRAM
27
EN
CHANGING THE DVD SETUP ITEMS
CUSTOM MENU
You can change the DVD players settings.
1 Hit [SETUP] twice in STOP mode so that the
DVD SETUP menu appears.
¡Hit [L] to select “CUSTOM”
then hit [ENTER].
NOTE:
¡If the menu does not appear, hit [PLAY B] first,
then hit [STOP C]. Make sure the disc is in STOP
mode, then slowly hit
[SETUP] twice.
2 Select the desired item.
¡Press [K / L] to select the desired item then hit
[ENTER] to confirm.
Refer to the pages below to set up each item.
LANGUAGE SETTING
Follow steps
1
to
2
in the “CUSTOM MENU” section
above.
3 Press [K / L] to select the desired item then
hit [ENTER].
AUDIO:
Sets the audio language.
SUBTITLE:
Sets the subtitle language.
DISC MENU:
Sets the language for DVD menu.
4 Press [K / L] to select a setting then hit
[ENTER].
¡If “OTHER” is selected on
the “AUDIO”, “SUBTITLE”
or “DISC MENU” screen,
press four-digit number to
enter the code for the desired
language. (Refer to the lan-
guage code list.)
¡Only the languages support-
ed by the disc can be select-
ed.
5 Hit [SETUP] to exit the menu.
NOTES:
¡Language Setting for Audio and Subtitle are not
valid for some discs due to default setting of the
disc. In this case, set them by hitting
[AUDIO] and
[SUBTITLE]. (Refer to page 24.)
¡If you select a language that is not supported by the
disc, subtitle will automatically be set OFF and the
first item of the audio languages will be automatical-
ly set.
DVD-V
If you choose a language that has a 3 letter language
code, the code will be displayed every time you change
the AUDIO or SUBTITLE language setting above. If
you choose any other languages, ‘---’ will be displayed
instead. (3 letter language code is written in bracket.)
Language Code
A-B
Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851
C-E
Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166
F-H
Faroese 5261
Fiji 5256
Finnish [FIN] 5255
French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467
I-K
Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767
Language Code
L-N
Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061
O-R
Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467
S
Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568
T
Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Tu rkish [TUR] 6664
Tu rkmen 6657
Tw i 6669
U-Z
Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yo r uba 7161
Zulu 7267
A
SETUP LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ORIGINAL
OFF
ENGLISH
SUBTITLE
OFF
ENGLISH
FRENCH
SETUP LANGUAGE
DISC MENU
ENGLISH
FRENCH
SPANISH
SETUP LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SETUP LANGUAGE
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
P27 Step
3
P28 Step
3
P28 Step
3
P29 Step
3
A
B
C
D
28
EN
AUDIO SETTINGS
Choose the appropriate Audio settings for your equip-
ment as it only affects during the playback of DVD
discs.
Follow steps
1
to
2
in the “CUSTOM MENU” sec-
tion on page 27.
3 Press [K / L] to select the below items then
hit [ENTER].
DRC (Dynamic Range
Control):
¡To compress the range of soft
to loud sound.
¡The default setting is “ON”.
DOWN SAMPLING:
¡ON : Output in 48 kHz.
(default)
¡OFF : Output the original
sound.
When playing disc with copyright Protection
¡If you select “OFF”, copyright protection will be
activated and sound will be down sampled at 48kHz.
DOLBY DIGITAL:
Set to “ON” when the unit is
connected to a Dolby Digital
Decoder.
¡ON: Output a Dolby Digital signal
(default)
¡OFF: Convert the Dolby Digital to PCM
(2 channel stereo)
4 Hit [SETUP] to exit the menu.
QUICK
DISPLAY SETTING
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
Follow steps
1
to
2
in the “CUSTOM MENU” sec-
tion on page 27.
3 Press [K / L] to select the below items then
hit [ENTER].
TV MODE:
¡Press [K / L] for an item
selection, then hit
[ENTER].
¡Select “4:3 LETTER BOX”
for black bars to appear on top and bottom of the
screen.
¡Select “4:3 PAN & SCAN” for a full height picture
with both sides trimmed.
¡The default setting is “4:3 LETTER BOX”.
STILL MODE
:
¡Press [K / L] for an item
selection, then hit
[ENTER].
¡Select “AUTO” normally.
¡If you select “FIELD”, the picture in the still mode
will be stabilized.
¡If you select “FRAME”, the picture in the still
mode will be highly defined.
ANGLE ICON:
¡Hit [ENTER] repeatedly to turn Angle icon “ON” or
“OFF”.
¡The default setting is “ON”.
AUTO POWER OFF:
¡Hit [ENTER] repeatedly to turn Auto Power off
“ON” or “OFF”.
¡
The default setting is “ON” and the screen saver pro-
gram starts when there is no input from the unit for 5
minutes in the stop mode. After the screen saver pro-
gram is activated for 15 minutes, the power is auto-
matically turned off.
4 Hit [SETUP] to exit the menu.
QUICK
B
TV MODE 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON
SETUP DISPLAY
TV MODE 4:3 LETTERBOX
STILL MODE AUTO
ANGLE ICON ON
AUTO POWER OFF ON
SETUP DISPLAY
C
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
ON
SETUP AUDIO
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
ON
SETUP AUDIO
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
ON
SETUP AUDIO
LANGUAGE SETTING FOR THE ON-SCREEN MENUS
¡You can access the TV SETUP menu by hitting [SETUP] from the DVD mode. Refer to “SELECTING THE
LANGUAGE” on page 13 to change the language for the on-screen menus.
29
EN
CONTROL LEVELS
¡
ALL
All parental lock is cancelled.
¡
Level 8
DVD software of any grade (adult/general/children)
can be played back.
¡
Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
¡
Level 1
Only DVD software intended for children can be
played back, with those intended for adult and gen-
eral use prohibited.
PARENTAL CONTROL
Parental Control limits the disc viewing that exceed
your setting (with a password or playback will stop).
This feature allows you to prevent discs with alterna-
tive scenes from being played by your children.
PARENTAL LEVEL
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s rat-
ings exceed the level you set.
Follow steps 1 to 2 in the “CUSTOM MENU” sec-
tion on page 27.
3 Enter your four-digit password then hit
[ENTER].
4 Press [K / L] to select “PARENTAL LEVEL
then hit [ENTER].
5 Press [K / L]to select the desired level
then hit [ENTER].
6 Hit [SETUP] to exit the menu.
NOTES:
¡
When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the pass-
word.
¡To change the password, press [K / L] to select
“PASSWORD CHANGE” at step 4 then hit
[ENTER]. Enter the four-digit password, then hit
[ENTER].
¡With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
¡Record the password in case you forget it.
IF YOU FORGET THE PASSWORD
1 Hit the Number buttons [4], [7], [3], [7] at
step
3. Then enter your new password.
¡Password will be cleared and parental level will be
set to “ALL”.
2 Proceed with steps 4 to 6 again.
This allows you to return all selections of SETUP
(except for “PARENTAL” and menu language) to
their default settings.
1 Hit [SETUP] twice in STOP mode so that the
“INITIALIZE” menu appears.
2 Press [K / L] to select “INITIALIZE” then hit
[ENTER].
3 Select “YES” then hit [ENTER] twice.
All the settings (except for
“PARENTAL” and menu lan-
guage) will be cleared.
¡To cancel the initialization,
select “NO”.
4 Hit [SETUP] to exit the menu.
DVD-V
D
SETUP PARENTAL
PASSWORD
Enter current password.
PASSWORD CHANGE
PARENTAL LEVEL ALL
SETUP PARENTAL
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
SETUP PARENTAL
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP INITIALIZE
Initialize?
NO
YES
INITIALIZE
30
EN
If the unit does not perform properly when operated as instructed in this Owners Manual, check the unit, con-
sulting the following checklist.
TROUBLESHOOTING GUIDE
Problem Corrective Action
No Picture or Sound
Try a new channel, if OK, then possible station trouble.
Make sure the power is turned on.
Hit [SELECT] on the remote control to select TV mode. Then try
other TV feature.
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Bars On Screen
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture Distorted or Blurred
Try a new channel, if OK, then possible station trouble.
If outside antenna is being used, check for broken wire.
Picture Rolls Vertically
Try a new channel, if OK, then possible station trouble.
Lines or Streaks in Picture
If outside antenna is being used, check for broken wire.
Check for local interference.
No Color
Try a new channel, if OK, then possible station trouble.
Is antenna connected to jack on the back of the set?
If outside antenna is being used, check for broken wire.
Adjust COLOR control.
Poor Reception on Some Channels
Try a new channel, if OK, then possible station trouble.
Ghosts in Picture
Is antenna connected to jack on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Weak Picture
Try a new channel, if OK, then possible station trouble.
Is antenna connected to jack on the back of the set?
If outside antenna is being used, check for broken wire.
Adjust CONTRAST & BRIGHT control.
Sound OK, Picture Poor
Try a new channel, if OK, then possible station trouble.
Is antenna connected to jack on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Adjust CONTRAST & BRIGHT control.
Picture OK, Sound Poor
Try a new channel, if OK, then possible station trouble.
Check for local interference.
Different color marks on screen
Magnetism from nearby appliances and geomagnetism might affect
the color of the TV picture. Move the unit away from the appliances,
the unit can repair itself automatically. If you want to repair immedi-
ately, unplug the unit power cord, then plug it in again 30 minutes or
so later. This automatically resets the unit.
Problem Corrective Action
No power
Make sure the power plug is connected to an AC outlet.
Make sure the power is turned on.
No operation by infrared remote
Check if the power plug is connected to an AC outlet.
control
Check the batteries in the remote control.
Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote.
You have to be within 23 feet of the unit.
Check if the correct mode is selected. If not switch the mode by hit-
ting [SELECT] on the remote control,whichever you need.
TV Mode
31
EN
NOTES:
Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owners Manual for details on correct operations.
Playback from a desired track and random playback are not available during program playback.
Closed Caption Problem Possible Remedy
The unit is showing captions • You are watching a live broadcast and spelling errors made by the
that are misspelled. closed captioning production company may pass through uncorrected.
A prerecorded program will not show any misspelled words because
of the normal time available for editing the captions.
The unit will not show the text • Captions that are delayed a few seconds behind the actual dialogue
in its entirety or there is a delay of are common for live broadcast. Most captioning production companies
what is being said. can display a dialogue to a maximum of 220 words per minute. If a
dialogue exceeds that rate, selective editing is used to insure that the
captions remain up-to-date with the current TV screen dialogue.
The captions are scrambled with • Interference caused by building, power lines, thunderstorms, etc.
white boxes on the TV screen. may cause scrambled or incomplete captions to appear.
The program guide listed a TV show
• Broadcasters may at times use a time compression process to the
as being closed captioned but none actual program so that additional advertising time can be given.
of the captions were displayed. Since the decoder cannot read the compressed information,
captions will be lost.
The unit screen shows a black You are in the TEXT mode. Select CAPTION mode or CAPTION
box on certain channels. [OFF].
Problem Corrective Action
No picture • Insert a correct video disc that plays on this unit.
• Hit
[SELECT] on the remote control to select DVD mode. Next, hit
[PLAY B] or [OPEN/CLOSE
AA
]. Then, try other DVD feature.
Disc cannot be played
• Insert the disc.
• Clean the disc.
• Place the disc correctly, with the label side up.
• Cancel the parental lock or change the control level.
No sound
• Connect the audio cables firmly.
Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output
This unit does not support DTS audio. This is not a malfunction.
Distorted picture
There are some cases where pictures may be slightly distorted, which
are not a sign of a malfunction.
Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language • The selected language is not available for audio or subtitles on the
does not match the set up DVD.
This is not a malfunction.
The camera angle cannot be • The DVD does not contain sequences recorded from different camera
changed angles. This is not a malfunction.
Audio or subtitle language cannot The DVD does not contain audio source or subtitles in the selected
be changed language. This is not a malfunction.
“Prohibited icon” appears on the That operation is prohibited by the unit or the disc.
screen, prohibiting an operation This is not a malfunction.
CD sound dropout • Scratched disc. Replace the disc with an unscratched one.
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
DVD Mode
32
EN
CABINET CLEANING
Wipe the front panel and other exterior surfaces of
the unit with a soft cloth immersed in lukewarm
water and wrung dry.
Never use a solvent or alcohol. Do not spray insec-
ticide liquid near the unit. Such chemicals may
cause damage and discoloration to the exposed sur-
faces.
SERVICING
Should your unit become inoperative, do not try to
correct the problem by yourself. There are no user-
serviceable parts inside. Turn off, unplug the power
cord and please call our help line at 1-800-605-
8610, to locate an Authorized Service Center.
IF THE LASER OPTICAL PICKUP UNIT IS DIRTY
If the unit still does not perform properly when it is operated, while referring to the relevant sections and to
“TROUBLESHOOTING GUIDE” in this Owner's Manual, the laser optical pickup unit may be dirty. Consult
your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
Always store the disc in its protective case when it
is not used.
DISC HANDLING
To clean-off, use a soft cloth.
Do not use a hard cloth since this will mar the disc.
Wipe the disc in a straight line from center to edge.
Never wipe with a circular motion.
Do not use detergent or abrasive cleaning agents.
MAINTENANCE
33
EN
CRT : 13 inch in-line gun,
90˚ deflection tube
Television system: NTSC-M
TV Standard
Closed caption system: §15.119/FCC
Channel coverage:
VHF: 2 ~ 13
UHF: 14 ~ 69
CATV: 2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System: 181 channel
frequency synthesized
tuning system
Channel access: Direct access keyboard,
programmable
scan and up/down
Discs: DVD-Video, Audio CD
Output signal format: NTSC color
Designs and specifications are subject to change without notice.
If there is a discrepancy between languages, the default language will be English.
TV
DVD
GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS
Sound output: 2 speakers, 1W, 8 ohm
OTHER SPECIFICATIONS
Terminals
Antenna input: VHF/UHF/CATV
75 ohm unbalanced (F-type)
Video input: RCA connector [ 1
Audio L/R input: RCA connector [ 2
Headphone: 1/8
" stereo (3.5 mm)
Coaxial digital
audio output
(only DVD): One pin jack,
500m Vpp (75 ohm)
Remote control: Digital encoded
infrared light system
Operating
temperature: 5°C to 40°C
(41°F~104°F)
Power requirements: AC 120V, 60Hz
Power consumption
(Maximum) : 65W
Dimensions : H:15-13/16" (402mm)
W:15-3/16" (386mm)
D:14-13/16" (376mm)
Weight : 21.6lbs. (9.8kg)
SPECIFICATIONS
34
ES
INDICE
CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 34
PANEL FRONTAL DE LA UNIDAD . . . . . . . . . . . . . . . 34
MANDO A DISTANCIA. . . . . . . . . . . . . . . . . . . . . . . . . 34
VISTA POTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 35
PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 35
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 35
CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 36
CONEXIÓN A UN AMPLIFICADOR EQUIPADO
CON TOMAS DE ENTRADA DIGITAL, PLATINA
MD O PLATINA DAT (Para DVD) . . . . . . . . . . . . . . . . . 36
CONEXCIONA UN DECODIFICADOR DOLBY
DIGITAL (Para DVD)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
SECCIÓN DE TV
PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 37
SELECCIÓN DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 37
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
SECCIÓN DE DVD
REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 38
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . . . . . . 38
CONTROLES DE
OPERACIÓN Y FUNCIONES
PANEL FRONTAL DE
LA UNIDAD
Consulte la figura 1 de la página 8
MANDO A DISTANCIA
Consulte la figura 2 de la página 8
VISTA POSTERIOR
Consulte la figura 3 de la página 9
1. Bandeja de carga del disco
2. Toma de entrada VIDEO
Conecte aquí la toma de salida de vídeo de una
videocámara o de una videograbadora.
3. Tomas de entrada AUDIO L/R
Conecte aquí las tomas de salida de audio de una
videocámara o de una videograbadora.
4. Botón STANDBY-ON
Presione para encender y apagar la unidad.
5. Botones VOLUME (VOL.) K / L
Presione para controlar el nivel del volumen para el
DVD y el televisor.
6. Botones CHANNEL (CH.) K / L
Presione para seleccionar el canal memorizado.
Presione para cambiar a un modo de televisor
cuando esta en el modo de DVD.
7. Ventanilla del sensor del mando a distancia
8. Botón
C STOP
Detiene la operación del disco.
9. Botón H PREV
Reproduce desde el inicio del capítulo o canción
actual.
Botón h SEARCH (panel frontal)
Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción hacia
atrás.
10. Botón B PLAY
Inicia la reproducción del contenido del disco.
Presione para cambiar a un modo de DVD cuando
esta en el modo de televisor.
11. Botón NEXT G
Reproduce desde el inicio del siguiente capítulo o
canción.
Botón SEARCH g (panel frontal)
Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción en avance.
12. Botón PAUSE
FF
Hace una pausa en la operación del disco.
13. Botón
AA
OPEN/CLOSE
Presione para insertar un disco en la bandeja o
retirarlo de ella.
14. Toma HEADPHONE
Para conectar auriculares (no suministrados) y
escuchar en privado.
15. Botón MODE
Activa el modo de reproducción programada o el
modo de reproducción aleatoria cuand se reproducen
CDs.
16. Botones de números
Modo del televisor:
Presione dos dígitos para tener acceso directamente
al canal deseado.
Recuerde presionar [0] antes de elegir un canal de
un solo dígito.
Botón +100
Presione para seleccionar canales de televisión por
cable cuyo número sea superiors a 99.
Modo DVD:
Presione para introducir el número deseado.
Botón +10
Presione para introducir números superiors a 9.
17. Botón SLEEP
Presione para visualizar el temporizador para
dormir y activar la función. La hora de apagado
puede determinarse por el número de veces que
usted pulsa el botón. (0, 30, 60, 90 o 120 minutos)
18. Botón h
Presione para volver rápidamente en el disco.
Presione
[PAUSE F] y presione este botón para
empezar la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad
en avance de la cámara lenta.
Botón g
Presione para avanzar rápidamente en el disco.
Presione
[PAUSE F] y presione este botón para
empezar la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad
de avance de la cámara lenta.
19. Botón V.SURR (envolvente virtual)
Presione para activar/desactivar el envolvente
virtual.
35
ES
20. Botón SETUP
Presione para entrar o salir del menú de
configuración de televisor o DVD.
21. Botón TITLE
Visualiza el menú de títulos.
22. Botón CLEAR
Repone un ajuste.
23. Botón DISPLAY
Modo del televisor:
Presione para visualizar el número del canal en la
pantalla. Si lo presiona de nuevo, el número del
canal desaparecerá.
Modo de DVD:
Visualiza el estado actual en la pantalla del televisor
con fines de comprobación.
24. Botón SEARCH MODE
Presione para localizar un punto deseado.
25. Botón AUDIO
Presione para seleccionar un idioma de audio o un
modo de sonido deseado.
26. Botón SUBTITLE
Presione para seleccionar un idioma de subtítulos
deseado.
27. Botón REPEAT
Repite la reproducción del disco, título, capítulo o
pista actual.
28. Botón ANGLE
Presione para cambiar el ángulo de la cámara y ver,
desde un ángulo diferente, la secuencia que está
siendo reproducida (si existe).
29. Botón REPEAT A-B
Repite la reproducción de una sección seleccionada.
30. Botón RETURN
Permite volver a la pantalla anterior en el modo de
configuración.
31. Botón ENTER
Presione para establecer un ajuste.
32. Botones K / L / { / B
Modo de televisor:
Presione para seleccionar un modo de ajuste desde
el menú que aparece en la pantalla del televisor.
Presione para seleccionar o ajustar desde un menú
particular.
Modo de DVD:
Presione para seleccionar un ítem de menú.
33. Botón DISC MENU
Muestra menú del DVD.
34. Botón SELECT
Presione para cambiar a un modo de televisor,
modo de entrada externa o modo de DVD.
35. Botón MUTE
Presione para apagar el sonido de un programa de
TV. (La visualización del nivel del sonido cambia
de ROJO CLARO a AZUL CLARO.) Presione de
nuevo este botón o [VOL. K / L] para restaurar el
sonido.
NOTA: Cuando seleccione el modo DVD con este
botón, Presione primero [PLAY
BB
] u
[OPEN/CLOSE
AA
]. De lo contrario, las
funciones del DVD no se activarán.
36. Botón PICTURE
Presione para entrar en el modo de ajuste de imagen.
37. Cable de alimentación
Conéctelo a una toma de CA convencional (120
V/60 Hz).
NOTA: Retire el cable de alimentación del gancho
para evitar romperlo antes de conectarlo a
una toma de CA convencional.
38. Toma COAXIAL
(audio de DVD solamente)
Conecte a la entrada digital de un amplificador o
decodificador externo.
39. Toma de entrada ANT.
Conecte a una antena, sistema de televisión por
cable o sistema de satélite.
PREPARACIÓN PARA LA
UTILIZACIÓN
Nota para el instalador de sistemas CATV:
Esta nota tiene la finalidad de llamar la atención del
instalador de sistemas CATV para que tenga en
cuenta el Artículo 820-40 del NEC, el cual
proporciona consejos para hacer una conexión a
tierra apropiada y, en particular, especifica que la
tierra del cable deberá estar conectada al sistema de
puesta a tierra del edificio, tan cerca del punto de
entrada del cable como sea posible.
NOTA:
Antes de enchufar la antena a la toma ANT. del
televisor/DVD, compruebe que la clavija no esté
doblada. Si esta doblada, póngala derecha como se
muestra en la ilustración, y luego conéctela en la
toma ANT. de la unidad.
1) Abra la cubierta del compartimiento de las pilas
empujando la cubierta del mando a distancia en el
sentido de la flecha.
2) Inserte 2 pilas "AA" en el compartimiento de las
pilas, en el sentido indicado por las marcas de
polaridad (+/-).
3) Vuelva a poner la cubierta.
NOTAS:
No mezcle pilas alcalinas y de manganeso.
No mezcle pilas viejas y nuevas.
PARA INSERTAR LAS PILAS
CONEXIONES DE
ANTENA/CABLE
Clavija doblada
Cable
Clavija
(Necesita enderezarse)
(Clavija derecha)
Consulte la figura 4 de la página 10
36
ES
NOTA:
Cuando conecte una videograbadora monofónica
(otra fuente) a esta unidad, conecte la toma de
salida de audio de la videograbadora monofónica
(otra fuente) a la toma AUDIO L de esta unidad. El
audio saldrá igualmente por los canales izquierdo y
derecho.
Utilice un cable digital coaxial de audio
(disponible en el comercio) para hacer las conexiones
de audio.
NOTAS:
La fuente de audio de un disco en un formato de
sonido envolvente Dolby Digital de 5,1 canales no
se puede grabar como sonido digital mediante una
platina MD o DAT.
Asegúrese de apagar todos los componentes del
sistema antes de conectar otro componente.
Consulte los manuales del propietario de los
componentes que va a conectar a la unidad.
Ponga DOLBY DIGITAL en APDO. para la salida
de audio en el modo de preparación. La
reproducción en una unidad utilizando ajustes
incorrectos puede provocar distorsión por ruido, y
también se pueden dañar los altavoces.
Consulte la figura 6 de la página 11
CONEXIÓN A UN
AMPLIFICADOR EQUIPADO
CON TOMAS DE ENTRADA
DIGITAL, PLATINA MD O
PLATINA DAT (Para DVD)
Consulte la figura 5 de la página 11
ANTENA COMBINADA DE VHF/UHF
La antena combinada de VHF/UHF de 75 ohmios
puede conectarse a la toma ANT.
ANTENA SEPARADAS DE VHF/UHF
En algunas zonas será necesario utilizar una antena
exterior.
TELEVISION POR CABLE SIN CAJA DE
CONVERTIDOR / DECODIFICADOR
Utilice esta conexión si su sistema de televisión por
cable se conecta directamente a su televisor/DVD sin
una caja de convertidor. Utilice el mando a distancia
de la unidad para seleccionar los canales.
TELEVISION POR CABLE CON CAJA
DE CONVERTIDOR/DECODIFICADOR
O CAJA DE SATÉLITE
Si su empresa de televisión por cable le suministra
una caja de convertidor, o si usted utiliza un sistema
de satélite, podrá utilizar la conexión básica mostrada
aquí.
La selección de los canales deberá hacerse con la caja
de convertidor o con la caja de satélite. Esto significa
que los canales no se podrán cambiar utilizando el
mando a distancia de la unidad.
PARA VER UN CANAL
CODIFICADO/DECODIFICADO
1) Ponga el selector de canales de la unidad en la
posición del canal de salida de la caja de
convertidor de televisión por cable o de la caja de
satélite. (Ej., CH3)
2) Seleccione el canal que va a ver en su caja de
convertidor de televisión por cable o caja de
satélite.
Cuando vea un programa grabado en otra fuente
(videograbadora o videocámara), utilice las tomas de
entrada de audio/vídeo de la parte delantera de la
unidad.
Conecte las tomas de salida de audio/vídeo de otra
fuente a las tomas AUDIO L/R y VIDEO de esta
unidad.
Después presione [SELECT] hasta que aparezca
"AUX" en la pantalla.
CONEXIÓN A TOMAS DE
ENTRADA EXTERNA
NOTA:
Para su seguridad y para evitar que se dañe
la unidad, desenchufe el cable de antena de la
toma ANT. antes de mover la unidad.
37
1 Enchufe el cable eléctrico
de la unidad
Enchufe el cable eléctrico de la unidad en
una toma de CA estándar.
NOTA:
Si aparecen algunas cifras en la esquina
de la pantalla, presione [STANDBY-ON] sin des-
enchufar el cable eléctrico.
Asegúrese de que ...
Presiona [STANDBY-ON] para encender la unidad.
NOTA:
Esta función afecta sólo el idioma en el menú de la
pantalla y no la fuente de audio.
2 Seleccione “LANGUAGE”
Presione [SETUP] en el mando a
distancia.
Presione
[
KK
/
LL
] para señalar
“LANGUAGE”.
3
Seleccione “ENGLISH”, “ESPAÑOL” o “FRANÇAIS”
Seleccione “ENGLISH” = inglés, “ESPAÑOL” o
“FRANÇAIS” = francés con [ENTER].
4 Salga del modo de idioma
Presione [SETUP] en el mando a distancia para
volver al modo del televisor.
NOTA: Si, por alguna razón, el menú está en francés,
presione [SETUP] en el mando a distancia, presione
[
KK
/
LL
] para señalar el “LANGAGE [FRANÇAIS]”,
a continuación, presione [ENTER] y presione
[SETUP] en el mando a distancia.
TV
SELECCIÓN DE IDIOMA
SECCIÓN DE TV
PREPARACIÓN PARA LA
UTILIZACIÓN
Fabricado bajo licencia de Dolby
Laboratories. “Dolby” y el símbolo de la D
doble son marcas de fábrica de Dolby
Laboratories.
Si utiliza esta unidad para reproducir un disco DVD
en un formato de sonido envolvente Dolby Digital de
5,1 canales, la unidad dará salida a un flujo de datos
DOLBY DIGITAL desde su toma COAXIAL.
Si conecta la unidad a un decodificador Dolby
Digital, podrá disfrutar de una tonalidad más
convincente y real, con un sonido envolvente potente
y de alta calidad similar al de los cines.
Utilice cables digitales coaxiales de audio
(disponibles en el comercio) para hacer las
conexiones de audio.
NOTAS:
Asegúrese de apagar todos los componentes del
sistema antes de conectar otro componente.
Consulte los manuales del propietario de los
componentes que vaya a conectar a la unidad.
Si conecta un decodificador Dolby Digital, ponga
DOLBY DIGITAL en ENC. para la salida de audio
en el modo de preparación.
A menos que se haga la conexión a un
decodificador Dolby Digital, ponga DOLBY
DIGITAL en APDO. para la salida de audio en el
modo de preparación. La reproducción en la unidad
utilizando ajustes incorrectos puede generar
distorsión de ruido, y también puede estropear los
altavoces.
Consulte la figura 7 de la página 12
CONEXCIONA UN
DECODIFICADOR DOLBY
DIGITAL (Para DVD)
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
ES
38
ES
Asegúrese que ...
La unidad debe encenderse.
AUTOPROGRAMACIÓN DE CANAL
Como el ajuste inicial, todos canales están memoriza-
dos en esta unidad, incluyendo los canales no
disponibles en su área. Esta función puede poner los
canales sólo disponibles en la memoria.
1 Seleccione “AJUSTE DE CANAL
Presione [SETUP] en el mando a
distancia.
Presione
[
KK
/
LL
] para señalar
“AJUSTE DE CANAL”.
A continuación, presione
[ENTER].
2 Empiece el prefijado automático
Presione [
KK
/
LL
] para señalar
“AUTOPROGRAMACION DE
CA”.
A continuación, presione
[ENTER].
El sintonizador busca y memoriza todos los canales
activos en su localidad.
3 Después de buscar
El sintonizador se detiene en el canal memorizado
más bajo.
Cuando se activa AUTOPRO-
GRAMACION DE CA, donde no
hay entrada de señal del televisor,
aparecerá “NO HAY SEÑAL DE
TV” en la pantalla después de ter-
minar la búsqueda de canales.
La unidad puede reconocer los canales de TV de
cable para que sean canales de TV de antena con
las condiciones de recepción. En este caso, pruebe
nuevamente con el prefijado automático en las
condiciones de recepción fina.
La programación de canal en memoria NO es
necesario cuando conectado a una caja de cable
o caja de satélite. Sólo tiene que seleccionar el
canal de entrada para la caja de cable o caja de
satélite (por ejemplo CA3) en la unidad, después
seleccione el canal a ver en la caja de cable o
caja de satélite.
TV
AJUSTE DE CANAL
REPRODUCCIÓN BÁSICA
Para empezar
¡Conecte el interruptor del amplificador y otros
equipos, si fuera necesario.
1 Presione [STANDBY-ON].
¡La alimentación se conectará.
2 Presione [OPEN/CLOSE A].
¡La bandeja de carga del disco se abrirá.
3 Ponga el dlsco en la bandeja con el lado de
la etiqueta hacia arriba.
4 Presione [PLAY B].
¡La bandeja se cerrará automáticamente y la
reproducción empezará después desde el primer
capítulo o pista del disco. Si la reproducción no
empieza automáticamente, presione [PLAY
BB
].
¡Cuando reproduzca un DVD que tenga grabado un
menú de títulos, el menú aparecerá en la pantalla.
5 Presione
[STOP
CC
] para detener
la reproducción.
CDDVD-V
SECCIÓN DE DVD
REPRODUCCIÓN DE UN
DISCO
– T V P R E P –
B AJUSTE DE CANAL
AJUSTE DE V-CHIP
IDIOMA [ESPAÑOL]`
TITULO [OFF]
AJUSTE DE CANAL
AGREGAR/BORRAR (CATV)
B AUTOPROGRAMACION DE CA.
NO HAY SEÑAL DE TV
39
ES
MEMO
Printed in Malaysia 1EMN20257
T8014UQ ★★★★★
LIMITED WARRANTY
FUNAI CORP. will repair this MAGNAVOX product, free of charge in the USA in the event of defect in materials
or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail
purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This MAGNAVOX Limited warranty does not apply
to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP. or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY A FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE
PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN
THE UNIT IS CARRIED-IN TO A FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest Funai Authorized Service Center or for general service procedure, please
call 1-800-605-8610 or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-605-8610
http://www.funai-corp.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Funai MWC13D5df Manual de usuario

Categoría
Televisores CRT
Tipo
Manual de usuario

En otros idiomas