Bauknecht KR 19F6 A++ WS Program Chart

Marca: Bauknecht

Modelo: KR 19F6 A++ WS

Tipo: Program Chart

El Bauknecht KR 19F6 A++ WS es un frigorífico combinado con una capacidad neta total de 314 litros, distribuidos en 211 litros en el compartimento frigorífico y 103 litros en el congelador. Dispone de tecnología No Frost, que evita la formación de hielo y escarcha en el frigorífico y el congelador, y de un sistema de refrigeración dual, que permite controlar de forma independiente la temperatura del frigorífico y el congelador.

Antes de usar el electrodoméstico, lea

atentamente las instrucciones de uso.

PANTALLA INTELIGENTE

Esta función opcional sirve para ahorrar energía. Para activar/desactivar

la pantalla inteligente, pulse los botones Vacaciones

y Frío rápido

al mismo tiempo durante 3 segundos hasta que se escuche una señal

acústica. Para volver a activar temporalmente la pantalla, pulse cualquier

botón. Es importante tener en cuenta que esta función no desconecta el

electrodoméstico de la alimentación eléctrica, sino que únicamente reduce la

corriente consumida por la pantalla externa (consulte las Instrucciones de uso).

Nota: Al desactivar Green Intelligence ProFresh y al activarse la pantalla

inteligente: todos los LED de la pantalla se apagan.

5019 420 00034

GUÍA RÁPIDA

FIDKNOSEGRITPTGB NLFR ESDE

Printed in Italy 11/13 - Whirlpool

Botón ENCENDIDO/EN ESPERA

Para que el producto pase al modo de espera, pulse

el botón durante 3 segundos. Todos los iconos

se apagarán excepto el indicador Encendido/En

espera . Para volver a activar el electrodoméstico,

pulse una vez (brevemente) este botón. (consulte las

Instrucciones de uso)

1. INSTALLING TWO APPLIANCES

During installing the freezer and the fridge

together ensure that the freezer is located on the left and

the fridge on the right (as shown on the drawing). Left side

of refrigerator is equipped with special device in order to

avoid condensation problems between appliances.

We recommended installing two appliances together

using the linking-kit (as shown on the drawing).

You can buy it in Service.

2. FUNCTIONS

2.1. SMART DISPLAY*

This function can be used to save energy.

Please follow the instructions contained in the Quick

Start Guide to activate/deactivate the function.

Two seconds after activation of the Smart Display, the

display goes off. To adjust the temperature or use other

functions, it is necessary to activate the display by

pressing any button. After about 15 seconds without

performing any action, the display goes off again.

When function is deactivated the normal display is

restored. The Smart Display is automatically disabled

after a power failure. Remember that this function does

not disconnect the appliance from the power supply,

but only reduce the energy consumed by external

display.

Note: The declared appliance energy consumption

refers to operation with the Smart Display function

activated.

This function is available only on the model with User

Interface on the door.

2.2. 6th SENSE /

GREEN INTELLIGENCE

The 6th Sense/ Green Intelligence function works to

maintain the right temperature in the following cases:

- Door opened for a while

The function activates when door opening causes the

internal temperature to increase to values that do not

ensure safe storage of food and remains active until

optimal storage conditions have been restored.

- Fresh food stored in the freezer

The function activates when fresh food is placed in the

freezer and remains active until optimal freezing

conditions are reached so as to ensure the best

freezing quality with the lowest power consumption.

Note: Besides the quantity of food loaded into the

freezer, ambient temperature and the quantity of food

already inside the freezer affect the duration of the 6th

Sense/ Green Intelligence function. Therefore

significant duration variations are quite normal.

*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.

GREEN INTELLIGENCE PROFRESH

Esta función se activa automáticamente para garantizar las condiciones óptimas de

conservación de los alimentos. Para desactivar la función

1. INSTALLING TWO APPLIANCES

During installing the freezer and the fridge

together ensure that the freezer is located on the left and

the fridge on the right (as shown on the drawing). Left side

of refrigerator is equipped with special device in order to

avoid condensation problems between appliances.

We recommended installing two appliances together

using the linking-kit (as shown on the drawing).

You can buy it in Service.

2. FUNCTIONS

2.1. SMART DISPLAY*

This function can be used to save energy.

Please follow the instructions contained in the Quick

Start Guide to activate/deactivate the function.

Two seconds after activation of the Smart Display, the

display goes off. To adjust the temperature or use other

functions, it is necessary to activate the display by

pressing any button. After about 15 seconds without

performing any action, the display goes off again.

When function is deactivated the normal display is

restored. The Smart Display is automatically disabled

after a power failure. Remember that this function does

not disconnect the appliance from the power supply,

but only reduce the energy consumed by external

display.

Note: The declared appliance energy consumption

refers to operation with the Smart Display function

activated.

This function is available only on the model with User

Interface on the door.

2.2. 6th SENSE /

GREEN INTELLIGENCE

The 6th Sense/ Green Intelligence function works to

maintain the right temperature in the following cases:

- Door opened for a while

The function activates when door opening causes the

internal temperature to increase to values that do not

ensure safe storage of food and remains active until

optimal storage conditions have been restored.

- Fresh food stored in the freezer

The function activates when fresh food is placed in the

freezer and remains active until optimal freezing

conditions are reached so as to ensure the best

freezing quality with the lowest power consumption.

Note: Besides the quantity of food loaded into the

freezer, ambient temperature and the quantity of food

already inside the freezer affect the duration of the 6th

Sense/ Green Intelligence function. Therefore

significant duration variations are quite normal.

*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.

Green Intelligence

ProFresh, mantenga pulsados los botones Temperatura

y Frío rápido al mismo

tiempo durante 3 segundos hasta que suene una señal acústica y desaparezca el icono

Green Intelligence ProFresh

1. INSTALLING TWO APPLIANCES

During installing the freezer and the fridge

together ensure that the freezer is located on the left and

the fridge on the right (as shown on the drawing). Left side

of refrigerator is equipped with special device in order to

avoid condensation problems between appliances.

We recommended installing two appliances together

using the linking-kit (as shown on the drawing).

You can buy it in Service.

2. FUNCTIONS

2.1. SMART DISPLAY*

This function can be used to save energy.

Please follow the instructions contained in the Quick

Start Guide to activate/deactivate the function.

Two seconds after activation of the Smart Display, the

display goes off. To adjust the temperature or use other

functions, it is necessary to activate the display by

pressing any button. After about 15 seconds without

performing any action, the display goes off again.

When function is deactivated the normal display is

restored. The Smart Display is automatically disabled

after a power failure. Remember that this function does

not disconnect the appliance from the power supply,

but only reduce the energy consumed by external

display.

Note: The declared appliance energy consumption

refers to operation with the Smart Display function

activated.

This function is available only on the model with User

Interface on the door.

2.2. 6th SENSE /

GREEN INTELLIGENCE

The 6th Sense/ Green Intelligence function works to

maintain the right temperature in the following cases:

- Door opened for a while

The function activates when door opening causes the

internal temperature to increase to values that do not

ensure safe storage of food and remains active until

optimal storage conditions have been restored.

- Fresh food stored in the freezer

The function activates when fresh food is placed in the

freezer and remains active until optimal freezing

conditions are reached so as to ensure the best

freezing quality with the lowest power consumption.

Note: Besides the quantity of food loaded into the

freezer, ambient temperature and the quantity of food

already inside the freezer affect the duration of the 6th

Sense/ Green Intelligence function. Therefore

significant duration variations are quite normal.

*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.

que confirma que la función se ha desactivado. Para

volver a activar esta función, repita el mismo procedimiento.

Nota: La desactivación de la función desconecta el VENTILADOR en el frigorífico.

VENTILADOR

El ventilador distribuye la temperatura de manera más

uniforme en el producto y permite conservar mejor los

alimentos. De forma predeterminada, el ventilador está

encendido. Para apagar el VENTILADOR pulse los

botones Temperatura

y Frío rápido

al mismo

tiempo durante 3 segundos hasta que se escuche una

señal acústica y el icono Green Intelligence ProFresh

1. INSTALLING TWO APPLIANCES

During installing the freezer and the fridge

together ensure that the freezer is located on the left and

the fridge on the right (as shown on the drawing). Left side

of refrigerator is equipped with special device in order to

avoid condensation problems between appliances.

We recommended installing two appliances together

using the linking-kit (as shown on the drawing).

You can buy it in Service.

2. FUNCTIONS

2.1. SMART DISPLAY*

This function can be used to save energy.

Please follow the instructions contained in the Quick

Start Guide to activate/deactivate the function.

Two seconds after activation of the Smart Display, the

display goes off. To adjust the temperature or use other

functions, it is necessary to activate the display by

pressing any button. After about 15 seconds without

performing any action, the display goes off again.

When function is deactivated the normal display is

restored. The Smart Display is automatically disabled

after a power failure. Remember that this function does

not disconnect the appliance from the power supply,

but only reduce the energy consumed by external

display.

Note: The declared appliance energy consumption

refers to operation with the Smart Display function

activated.

This function is available only on the model with User

Interface on the door.

2.2. 6th SENSE /

GREEN INTELLIGENCE

The 6th Sense/ Green Intelligence function works to

maintain the right temperature in the following cases:

- Door opened for a while

The function activates when door opening causes the

internal temperature to increase to values that do not

ensure safe storage of food and remains active until

optimal storage conditions have been restored.

- Fresh food stored in the freezer

The function activates when fresh food is placed in the

freezer and remains active until optimal freezing

conditions are reached so as to ensure the best

freezing quality with the lowest power consumption.

Note: Besides the quantity of food loaded into the

freezer, ambient temperature and the quantity of food

already inside the freezer affect the duration of the 6th

Sense/ Green Intelligence function. Therefore

significant duration variations are quite normal.

*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.

se apagará para confirmar que el ventilador se ha

desactivado. Para encender el VENTILADOR repita el

mismo procedimiento. Como confirmación se escucha

una señal acústica y el icono se enciende.

Nota: Para comprobar las razones para apagar el

ventilador, consulte “RECOMENDACIONES DE

AHORRO ENERGÉTICO” en las Instrucciones de uso.

Botón FRÍO RÁPIDO

Utilizando la función de frío rápido es posible aumentar la capacidad de

enfriamiento en el compartimento frigorífico. Se recomienda usar esta función

cuando se coloca una gran cantidad de alimentos en el compartimento

frigorífico. Pulse el botón Frío rápido

para activar la función Frío rápido.

Cuando se activa, el indicador Frío rápido se enciende. La función se

desactiva automáticamente después de 6 horas o se puede desactivar

manualmente volviendo a pulsar el botón Frío rápido

TABLA DE ALARMAS

TIPO DE ALARMA Indicación Causa Solución

Alarma de puerta abierta.

La alarma acústica se activa y el indicador de alarma

parpadea.

La puerta ha estado abierta más de 2 minutos.

Cierre la puerta o pulse el botón de desactivación de alarma para detener la señal

acústica.

Anomalía. La letra “F” parpadea en la pantalla (°C). Avería del producto. Póngase en contacto con el Servicio de Asistencia.

1. Panel de control

2. Iluminación de LED principal*

3. Ventilador

4. Iluminación opcional en flujo múltiple*

5. Separador de niveles*

6. Área de aire frío de flujo múltiple*

7. Rejilla para botellas*

8. Cubierta del sensor

9. Cajón Cero grados*

10. Placa de características con el nombre comercial

11. Compartimento de refrigeración (recomendado

para la carne y el pescado)

12. Zona de repisas

13. Cajón para frutas y verduras

14. Separador del cajón para frutas y verduras*

15. Kit de reversibilidad de puertas*

16. Bandeja para huevos*

17. Portabotellas*

18. Estantes de la puerta

19. Junta de la puerta

* Disponible en determinados modelos

PUESTA EN MARCHA DEL ELECTRODOMÉSTICO

El electrodoméstico se pone en marcha

automáticamente al enchufarlo. Después de poner

en marcha el electrodoméstico, espere al menos

4-6 horas antes de colocar alimentos en su interior.

Cuando el electrodoméstico está conectado a la red

eléctrica, el visor se ilumina y se ven todos los iconos

durante aproximadamente 1 segundo.

Se encienden los valores por defecto (de fábrica) del

compartimento congelador.

CÓMO MODIFICAR EL SENTIDO DE APERTURA

DE LA PUERTA

- consulte las Instrucciones de uso adjuntas (Version_1)

Es recomendable que la modificación del sentido de

apertura de la puerta la hagan dos personas. No está

prevista la reversibilidad de la puerta para:

- modelos con asa integrada

- modelos con panel de cristal en la puerta.

Las especificaciones, los datos técnicos y las

imágenes podrían variar según el modelo

Indicador de ALARMA

(consulte la siguiente Tabla de alarmas)

Botón DESACTIVACIÓN DE LA ALARMA

Debe pulsarse en caso de alarma para silenciar la alarma acústica.

Botón VACACIONES

Esta función puede activarse para reducir el consumo de energía del electrodoméstico durante un periodo de tiempo prolongado.

Antes de activar la función, se deben retirar todos los alimentos perecederos del compartimento de refrigeración y asegurarse de que la puerta esté

cerrada correctamente ya que el frigorífico mantendrá una temperatura adecuada para evitar la formación de olores desagradables (+12 °C). Para activar/

desactivar, pulse el botón de modo Vacaciones durante 3 segundos.

Si la función está activada, el símbolo relacionado se encenderá y la temperatura del compartimento frigorífico se ajustará en un punto de ajuste más alto (el

indicador de temperatura mostrará el nuevo punto de ajuste de temperatura de +12 °C). La función se desactivará automáticamente al cambiar el punto de

ajuste de temperatura.

INDICADOR DE TEMPERATURA

Botón TEMPERATURA

Pulse el botón de temperatura para cambiar la temperatura:

el valor cambia cíclicamente entre 8 °C y 2 °C.

Nota: Los puntos de ajuste mostrados se corresponden con la

temperatura media en todo el frigorífico.