Black Box MEDIACENTO VSW-MC-CTRL Manual de usuario

Black Box
Marca
Black Box
Modelo
MEDIACENTO VSW-MC-CTRL
Tipo
Manual de usuario

Este manual también es adecuado para

24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM
MEDIACENTO
IPX
CONTROLLER
VSW-MC-CTRL
USER MANUAL
2
TABLE OF CONTENTS
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
1. SPECIFICATIONS ........................................................................................................................................................................... 3
2. OVERVIEW ...................................................................................................................................................................................... 4
2.1 Introduction ...............................................................................................................................................................................................4
2.2 Features ....................................................................................................................................................................................................4
2.3 What’s Included ........................................................................................................................................................................................ 4
2.4 Additional Items You Will Need ...............................................................................................................................................................4
2.5 Hardware Description ..............................................................................................................................................................................5
3. INSTALLATION .............................................................................................................................................................................. 6
4. USER INTERFACE PAGES ............................................................................................................................................................. 7
4.1 Login Page ................................................................................................................................................................................................7
4.2 Dashboard .................................................................................................................................................................................................8
4.3 Custom Display ........................................................................................................................................................................................9
4.4 Groups ..................................................................................................................................................................................................... 10
4.5 Settings ................................................................................................................................................................................................... 12
4.6 Hardware .................................................................................................................................................................................................13
5. ADVANCED COMMANDS ............................................................................................................................................................ 14
6. APPLICATION PROGRAM INTERFACE (API) ............................................................................................................................ 19
APPENDIX A. REGULATORY INFORMATION ................................................................................................................................ 20
A.1 FCC Statement .......................................................................................................................................................................................20
A.2 NOM Statement .....................................................................................................................................................................................21
APPENDIX B. DISCLAIMER/TRADEMARKS ................................................................................................................................. 22
B.1 Disclaimer ...............................................................................................................................................................................................22
B.2 Trademarks Used in this Manual ..........................................................................................................................................................22
3
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 1: SPECIFICATIONS
TABLE 1-1. MEDIACENTO IPX CONTROLLER SPECIFICATIONS
SPECIFICATION DESCRIPTION
Approvals FCC, TUV, CE, UL®, CSA, RoHS2, WEEE
Ethernet Network controller: (2) RJ-45 (10/100/1000 Mbps)
Connectors (1) HDMI,
(1) VGA,
(2) RJ-45,
(2) USB 2.0,
(1) DB9 RS-232 console port
Indicators (1) Power LED,
(2) Network Connection LEDs
Environmental Temperature Tolerance:
Operating: 32 to 140° F (0 to 60° C);
Humidity Tolerance:
Operating: 5–95%, noncondensing
Power Supply Input: 100–240 VAC, 60 Hz, 0.5 A;
Output: 12 VDC, 1.5 A
Dimensions 1.23"H x 6.13"W x 5.13"D (3.12 x 15.57 x 13.03 cm)
Weight 1.1 lb. (0.5 kg)
TABLE 1-2. DEFAULT SETTINGS
SETTING DEFAULT
user name admin
password BBNSMediaCento
41. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 2: OVERVIEW
2.1 INTRODUCTION
The MediaCento™ IPX Controller provides full control over the IP based MediaCento IPX transmitters and receivers. It turns the
system into an IP-based matrix switch and video wall controller. A Web interface enables users to switch from any source to
any display, create presets, and combine multiple receivers into a video wall. Users can control and switch the video wall zones
remotely. The system’s mobile support enables users to easily access and activate presets from a cell phone or tablet device.
And because the system is IP-based, it does not have any port limits and can potentially support hundreds of devices and video
walls up to 8 x 8 (64 screens).
2.2 FEATURES
Control IP-based MediaCento IPX Transmitters and Receivers.
Provides an intuitive user interface.
Includes Web app and mobile support.
Enables you to control video walls up to 8 x 8 (64 screens).
2.3 WHAT’S INCLUDED
Your package should include the following items. If anything is missing or damaged, contact Black Box Technical Support
at 877-877-2269 or info@blackbox.com.
MediaCento IPX Controller
Power supply with power cord
Quick Start Guide
2.4 ADDITIONAL ITEMS YOU WILL NEED
MediaCento IPX Transmitters and Receivers
5
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 2: OVERVIEW
2.5 HARDWARE DESCRIPTION
Figure 2-1 and 2-2 show the front and back panels of the MediaCento IPX Controller. Table 2-1 describes its components.
1
FIGURE 2-1. FRONT PANEL OF THE MEDIACENTO IPX CONTROLLER
2 3 4 5 6 7
8
8
FIGURE 2-2. BACK PANEL OF THE MEDIACENTO IPX CONTROLLER
TABLE 2-1. MEDIACENTO IPX CONTROLLER COMPONENTS
NUMBER IN FIGURE 2-1 OR 2-2 COMPONENT DESCRIPTION
1 (1) DB9 male connector RS-232 console port
2 (2) USB Type A connectors Links to USB devices
3(1) RJ-45 connector Links to AV network
4(1) RJ-45 connector Links to control network
5(1) HDMI connector Connects to HDMI
6(1) HD15 connector Connects to VGA
7 (1) Power LED Lights when power is ON
8(1) Power connector Connects to 12-VDC power supply
61. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 3: INSTALLATION
1. Connect the AV port (Eth1) to the AV network with the connected MediaCento endpoints.
2. (Optional) If using a separate control network, connect the control port (Eth0) to the network your PC or control device is
connected to.
3. Power on the MediaCento IPX Controller by plugging in the power supply.
7
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 4: USER INTERFACE PAGES
4.1 LOGIN PAGE
Connect through your preferred Web browser to access the controller’s Web interface in the following ways:
1. If the same Ethernet interface is used for both the MediaCento IPX endpoints and your control PC, you should be connected
to Eth1 and you will have to access the default IP address, “169.254.1.1”.
2. If you are using the optional Control port to control the system from a secondary network, your PC should be connected
to Eth0 and you will have to access the default IP address, “192.168.10.10”.
When first connecting to the MediaCento IPX Controller, you need to enter a user name and password. By default, the main user
is “admin” and the main password is ”BBNSMediaCento.”
FIGURE 4-1. LOGIN SCREEN
81. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 4: USER INTERFACE PAGES
4.2 DASHBOARD
The dashboard is where the user can check the status of the controller as well as see which each receiver is currently connected
to which transmitter. The main use of the dashboard will be to view status and change presets. Changing presets is done easily
by selecting the preset in the drop down menu and confirming the switch. Each preset also has a note that can be entered
for non-experienced users to easily find and switch the units.
FIGURE 4-2. DASHBOARD SCREEN
9
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 4: USER INTERFACE PAGES
4.3 CUSTOM DISPLAY
The custom display page is where specific switching is done as well as setting up presets, if desired. The matrix in the middle
is easy to use with receivers/groups/and video walls along the left of the matrix and transmitters (sources) along the top. To switch,
simply select the box that matches the desired receivers to the correct transmitters and confirm the switch. To set up presets,
switch the units to the desired layout, confirm the switch, and save the preset. When saving a preset, a name and note can be linked
to it for ease of use for all users.
FIGURE 4-3. CUSTOM DISPLAY SCREEN
10 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 4: USER INTERFACE PAGES
4.4 GROUPS
The groups page is where groups and video walls are created from a number of receivers. To create a group, select the desired
receivers and put them into the right column. The group can be named and saved now or turned into a video wall. To create a video
wall out of the group, check the video wall checkbox. This will open up an additional window below where you can enter the number
of rows and columns, as well as bezel information. You can drag and drop receivers in the group from the list to the left of the video
wall diagram. Bezel information is a ratio and units does not matter as long as the same units are used for all bezel information.
FIGURE 4-4. GROUPS SCREEN
11
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 4: USER INTERFACE PAGES
FIGURE 4-5. VIDEO WALL SCREEN
12 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 4: USER INTERFACE PAGES
4.5 SETTINGS
The settings page is where the controller specific settings can be changed. This currently includes the IP addresses of both the
control and video networks.
FIGURE 4-6. SETTINGS SCREEN
13
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 4: USER INTERFACE PAGES
4.6 HARDWARE
The hardware page is where new MediaCento IPX units are detected and configuration on them is done. Detecting new units
can take up to 30 seconds but it will find and display every MediaCento IPX unit seen on the network. Receivers are listed
on the left and transmitters on the right. Each unit can be given a specific name which is connected to the IP address.
This is suggested to make it easier to switch correct units. To correctly identify each unit OSD (On Screen Display) can be triggered.
This will display the IP address as well as any name currently given to a receiver on the display it is connected to.
FIGURE 4-7. HARDWARE SCREEN
14 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 5: ADVANCED COMMANDS
When first connecting to the MediaCento IPX Controller, you need to enter a user name and password. By default, the main user
is “admin” and the main password is ”BBNSMediaCento.”
FIGURE 5-1. LOGIN SCREEN
1. Connect to the unit’s control port through the default. IP address: 169.254.1.1
2. A blank Dashboard page will be shown:
FIGURE 5-2. BLANK DASHBOARD PAGE
15
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 5: ADVANCED COMMANDS
3. Start by adjusting the controller’s IP addresses on the Settings page:
FIGURE 5-3. SETTINGS PAGE
4. Once the IP settings have been configured, select the hardware page:
5. Select the detect units button. This process will take approximately 30 seconds to complete:
FIGURE 5-4. DETECT HARDWARE SCREEN
16 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 5: ADVANCED COMMANDS
6. Once completed, all detectable MediaCento IPX units will be displayed in the columns, receivers in the left and transmitters
in the right.
7. You can rename any device by selecting it and clicking “Rename Device”. In order to more easily tell which receiver has which IP
address, an OSD button will show the IP address of every connected unit:
FIGURE 5-5. HARDWARE SCREEN
8. After all units are named accordingly, groups and videowalls can be configured in the Groups page:
FIGURE 5-6. GROUPS PAGE
17
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 5: ADVANCED COMMANDS
9. Select which receivers will be in a group or videowall and bring them to the right column:
10. The group can be saved now as individual multicast selections or made into a video wall by selecting the “Make Wall” checkbox:
11. To create a videowall, first input the number of rows and columns are desired, as well as the information for bezel compensation:
12. Once set, simply drag and drop the list of receivers on the left to the appropriate spot on the diagram and save:
FIGURE 5-7. VIDEO WALL SCREEN
18 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 5: ADVANCED COMMANDS
13. To start switching video signals and set up presets go to the Custom Display page. The names and IP addresses along the top are
transmitters and along the left are receivers:
FIGURE 5-8. CUSTOM DISPLAY SCREEN
14. To switch a receiver between transmitters, simply select the row of your receiver and select the column of the transmitter you
want connected to it. Once completed, click the switch button. Switching takes a few seconds for all control commands to be
sent safely.
19
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
CHAPTER 6: APPLICATION PROGRAM INTERFACE (API)
To enable API functionality, navigate to the “Settings” tab and check the box under “Enable/Disable API User.” Enabling this setting
will allow the default API user of your MediaCento Controller the ability to receive API commands. API commands are sent via http.
To send a command, type the API command into a web browser using values specific to your MediaCento Setup.
All variables in API commands are based on the predefined information from the MediaCento Controller Web Interface. Groups and
Presets have to be defined before calling an API command. If a transmitter or receiver are not named, then their IP address (periods
Included) will be used in the API calls.
DEFAULT API CREDENTIALS
Username: apiuser
Password: apipass2015
SWITCH ONE RECEIVER TO TRANSMITTER
http://bbox.local.net/bbapi/v1/apiuser/switchrx?u=apiuser&p=apipass2015&t=tx1&r=rx1
**Replace bbox.local.net with hostname or IP address of MediaCento Controller box
Parameters:
u = API Username
p = API Password
t = Transmitter Name
r = Receiver Name
SWITCH GROUP TO TRANSMITTER
http://bbox.local.net/bbapi/v1/apiuser/switchgroup?u=apiuser&p=apipass2015&t=tx1&g=g1
**Replace bbox.local.net with hostname or IP address of MediaCento Controller box
Parameters:
u = API Username
p = API Password
t = Transmitter Name
g = Group Name
ACTIVATE A PRESET
http://bbox.local.net/bbapi/v1/apiuser/switchpreset?u=apiuser&p=apipass2015&preset=p1
**Replace bbox.local.net with hostname or IP address of MediaCento IPX Controller box
parameters:
u = API Username
p = API Password
preset = Preset Name
EXAMPLES
http://10.8.10.1/bbapi/v1/apiuser/switchpreset?u=apiuser&p=apipass2015&preset=preset1
http://10.8.10.1/bbapi/v1/apiuser/switchrx?u=apiuser&p=apipass2015&t=169.254.3.68&r=169.254.2.3
20 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
APPENDIX A: REGULATORY INFORMATION
A.1 FCC STATEMENT
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict
accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to
comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules,
which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emis sion from digital apparatus set out in the Radio
Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de
classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.
21
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
APPENDIX A: REGULATORY INFORMATION
A.2 NOM STATEMENT
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca de
una alberca, etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación.
Todo otro servicio deberá ser referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico
sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes que
impidan el flujo de aire por los orificios de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros
aparatos (incluyendo amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como
se indique en el aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados
sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato;o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
22 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
APPENDIX B: DISCLAIMER/TRADEMARKS
B.1 DISCLAIMER
Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover
damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation
may revise this document at any time without notice.
B.2 TRADEMARKS USED IN THIS MANUAL
Black Box and the Black Box logo type and mark are registered trademarks, and MediaCento is a trademark,
of Black Box Corporation.
Bonjour and Apple are registered trademarks of Apple, Inc.
Windows is a registered trademark of Microsoft Corporation.
UL is a registered trademark of Underwriters' Laboratories.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
23
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.87 7.877. 2269
NOTES
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
_
_________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________\
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
_________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
vsw-mc-ctrl_user_rev4.pdf
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
© COPYRIGHT 2017 BLACK BOX CORPORATION. ALL RIGHTS RESERVED.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Black Box MEDIACENTO VSW-MC-CTRL Manual de usuario

Black Box
Marca
Black Box
Modelo
MEDIACENTO VSW-MC-CTRL
Tipo
Manual de usuario
Este manual también es adecuado para
Descargar PDF
informe

En otros idiomas

Documentos relacionados