Samsung WA52J8060AW/A2-01 El manual del propietario

Marca: Samsung

Modelo: WA52J8060AW/A2-01

Categoría: Lavadoras

Tipo: El manual del propietario

Este manual también es adecuado para

User manual

WA52J8060A*/WA52J8700A*

-,4_,,,}r,f.<.,j_.,

_,_,_'_,_I'S.'_d_X_ <

Contents

Safety information

What you need to know about the safety instructions

Important safety symbols

Important safety precautions

Installation

Unpacking your washer

Overview of your washer

Basic location requirements

Important note to installer

Step-by-step installation

Operating instructions

Loading your washer

Getting started

Washing a load of laundry

Control panel

Cycle overview

Options

Washing clothes using the cycle selector

ATC (Auto Temperature Control)

The basics (WA52J8700A _)

Detergent use

Features

Maintaining your washer

Cleaning the exterior

Cleaning the interior

Storing your washer

Preserving the top cover and the front frame

Cleaning the dispensers

Self Clean

Troubleshooting

Checkpoints

Information codes

2 English

Specifications 59

Fabric care chart

Helping the environment

Declaration of conformity

Specification sheet

Cycle chart

English 3

Safety information

Congratulations on your new Samsung washer. This manual contains important information

on the installation, use and care of your appliance. Please take some time to read this manual

to take full advantage of your washer's many benefits and features.

What you need to know about the safety instructions

Please read this manual thoroughly to ensure that you Know how to safely and efficiently

operate the extensive features and functions of your new appliance. Please store the manual

in a safe location close to the appliance for future reference. Use this appliance only for its

intended purpose as described in this instruction manual.

Warnings and Important Safety Instructions in this manual do not cover all possible

conditions and situations that may occur. It is your responsibility to use common sense,

caution and care when installing, maintaining and operating your washer.

Because the following operating instructions cover various models, the characteristics of your

washer may differ slightly from those described in this manual and not all warning signs

may be applicable. If you have any questions or concerns, contact your nearest service center

or find help and information online at www.samsung.com.

Important safety symbols

What the icons and signs in this user manual mean:

/_ WARNING

Hazards or unsafe practices that may result

damage.

/_ CAUTION

Hazards or unsafe practices that may result

NOTE

Indicates that a risk of personal injury or material damage exists.

n severe personal injury, death and/or property

n personal injury and/or property damage.

SAVE THESE INSTRUCTIONS

4 English

Thesewarningsignsarehereto preventinjurytoyourselfandothers.

Pleasefollowthemexplicitly.

Afterreadingthismanual,storeit in asafeplacefor futurereference.

Read all instructions before using the appliance.

As with any equipment that uses electricity and moving parts, potential hazards exist. To

safely operate this appliance, familiarize yourself with its operation and exercise care when

using it.

Important safety precautions

/!'x, WARNING

To reduce the risk of fire, electric shock, or injury to persons when using your appliance,

follow basic precautions, including the following:

1. Read all instructions before using this appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or

spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as

they give off vapors that could ignite or explode.

3, Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4, Before the appliance is removed from service or discarded, remove the lid of the washing

or drying compartment.

5, Do not reach into the appliance if the drum is moving.

6, Do not install or store this appliance where it will be exposed to the weather.

7, Do not tamper with the controls.

8, Do not repair or replace any part of the appliance or attempt any servicing unless it is

specifically recommended in the user-maintenance instructions or in published user-

repair instructions that you understand and have the skills to carry out.

9o Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to

the wash water. These substances give off vapors that could ignite or explode.

SAVE THESE iNSTRUCTiONS

English 5

Safety information

10, Under certain conditions, hydrogen gas may be produced in a hot water system that

has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for 2 weeks or more, before using a washer or combination

washer-dryer, turn on all hot water faucets and let the water flow from each for several

minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not

smoke or use an open flame during this time.

/_ WARNING - State of California Proposition 65 Warnings:

This product contains chemicals known to the State of California to cause cancer and

reproductive toxicity.

Critical installation warnings

/_ WARNING

Plug the power cord into an AC !20 V/60 Hz/wall socket rated at 15 amps or higher. Use

the socket for this appliance only. In addition, do not use an extension cord.

• Sharing a wall socket with other appliances, using a power strip, or extending the power

cord may result in electric shock or fire.

• Do not use an electric transformer. It may result in electric shock or fire.

• Ensure that the power voltage, frequency, and current match the product's specifications.

Failing to do so may result in electric shock or fire.

Have this appliance installed by a qualified technician or service company.

• Failing to do so may result in electric shock, fire, an explosion, problems with the product,

or injury.

Remove all foreign substances such as dust or water from the power plug terminals and

contact points using a dry cloth on a regular basis.

• Unplug the power plug and clean it with a dry cloth.

• Failing to do so may result in electric shock or fire.

Plug the power plug into the wall socket in the right direction so that the cord runs towards

the floor.

• If you plug the power plug into the socket in the opposite direction, the electric wires

within the cable may be damaged and this may result in electric shock or fire.

SAVE THESE INSTRUCTIONS

6 English

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

• Improper grounding may result in electric shock, fire, an explosion, or problems with the

product.

• Never plug the power cord into a socket that is not grounded correctly. Make sure the

socket you use is grounded in accordance with local and national codes.

Do not install this appliance near a heater or flammable material.

Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to

direct sunlight or water (rain drops).

Do not install this appliance in a location where gas may leak.

• This may result in electric shock or fire.

Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged

power cord, or loose wall socket.

• This may result in electric shock or fire.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord,

insert the power cord between objects, or push the power cord into the space behind the

appliance.

• This may result in electric shock or fire.

Do not pull the power cord when unplugging the power plug.

• Unplug the power plug by holding the plug.

• Failing to do so may result in electric shock or fire.

If the power plug or power cord are damaged, contact your nearest service center.

Installation cautions

/'_ CAUTION

Position the appliance so that the power plug is easily accessible.

• Failing to do so may result in electric shock or fire due to electric leakage.

Install your appliance on a level and hard floor that can support its weight.

• Failing to do so may result in abnormal vibrations, noise, or problems with the product.

SAVE THESE iNSTRUCTiONS

English 7

Safety information

Unplug the power plug when the appliance is not being used for long periods of time or

during a thunder/lightning storm.

• Failing to do so may result in electric shock or fire.

Critical usage warnings

/_ WARNING

If the appliance is flooded, cut the Dower immediately and contact your nearest service

center.

If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug

immediately and contact your nearest service center.

• Failing to do so may result in electric shock or fire.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate the area immediately.

Do not turn any appliance or light on or off.

• Do not use a ventilating fan.

• A spark may result in an explosion or fire.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or

other flammable or explosive substances.

• This may result in electric shock, fire, or an explosion.

Do not force the washer lid open while the washer is operating (high-temperature washing/

drying/spinning).

• Water flowing out of the washer may cause burns or cause the floor to be slippery.

This may result in injury.

• Forcing the lid open can damage the product or cause injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the

washer before using it.

Do not insert your hand under the washer.

• This may result in injury.

Do not touch the power plug with wet hands.

• This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while the washer is in operation.

SAVE THESE INSTRUCTIONS

8 English

• Plugging the power plug into the wall socket again may cause a spark and result in

electric shock or fire.

Keep all packaging materials well out of the reach of children, as packaging materials can be

dangerous to children.

If a child places a bag over their head, the child may suffocate.

not let children or infirm persons use this washer unsupervised.

Failing to do so may result in electric shock, burns or injury.

not insert your hand or a metal object under the washer while it is operating.

This may result in injury.

not attempt to repair, disassemble, or modify the appliance yourself.

Do not use any fuse (such as copper, steel wire, etc.) other than the standard fuse.

If you need to repair or reinstall the appliance, contact your nearest service center.

Failing to do so may result in electric shock, fire, problems with the product, or injury.

If any foreign substance such as water enters the appliance in any area other than the tub,

unplug the power plug and contact your nearest service center.

• Failing to do so may result in electric shock or fire,

If the water supply hose comes loose from the faucet and floods the appliance, unplug the

power plug.

• Failing to do so may result in electric shock or fire.

Usage cautions

/_ CAUTION

If the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc.,

unplug the power plug and clean the washer using a damp, soft cloth.

• Failing to do so may result in discoloration, deformation, damage or rust.

The clear portion of the lid can be broken by a strong impact. Take care when using the

washer.

• If the clear portion is cracked or broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the faucet

slowly.

SAVE THESE INSTRUCTIONS

English

\\TAS000J \\TA8700J "_\TA52J 03133Y 01 ENindd 9 2015/4/20 15:33:41

Safety information

Open the faucet slowly after a long period of non-use.

• The air pressure in the water supply hose or the water pipe may result in damage to a

part or in water leakage.

If a drain error occurs during an operation, check if there is a draining problem.

• If the washer is used when it is flooded because of a draining problem, it may result in

electric shock or fire due to electric leakage.

Do not insert your hand under the washer.

• This may result in injury.

Insert the laundry into the washer completely so that laundry does not get caught in the lid.

• If laundry gets caught in the lid, it may result in damage to the laundry or the washer, or

result in water leakage.

Ensure that the faucet is turned off when the washer is not being used.

• Ensure that the water supply hose connectors are properly tightened.

• Failing to do so may result in property damage or injury.

Open the faucet and check if the water supply hose connector is firmly tightened and that

there is no water leaking before using the product,

• If the water supply hose connectors are loose, it may result in water leakage.

Do not stand on top of the appliance or place objects (such as laundry, lighted candles,

lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

• This may result in electric shock, fire, problems with the product, or injury.

Do not operate the appliance with wet hands.

• This may result in electric shocK.

Do not spray volatile material such as insecticide onto the surface of the appliance.

• As well as being harmful to humans, it may also result in electric shock, fire, or problems

with the product.

Do not place an object that generates a electromagnetic field near the washer.

• This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch

the water.

• This may result in burns or injury.

For waterproof fabrics, only use the WATERPROOF cycle.

10 English

SAVE THESE INSTRUCTIONS

WAS(/00LWA870(/J WA52J 0f_lltf_Y 01 ENindd 10 2015/4/2(/ 15:1tf_:41

Do not use other cycles for waterproof fabrics.

This may result in injury or damage to the washer, walls, floor, or clothing due to

abnormal vibrations.

Set the temperature and spin according to the attached care label.

not operate the washer when the detergent dispenser is removed.

This may result in electric shock or injury due to water leakage.

not insert your hand into the detergent dispenser after opening it.

This may result in injury as your hand may be caught.

not place any non-laundry objects, such as shoes, food waste, or animals into the washer.

This can cause abnormal vibrations that can damage the washer, and, in the case of pets,

cause severe injury or death.

Do not press the buttons using sharp objects such as pins, IKnifes, fingernails, etc.

• This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams, or lotions usually found in slKincare shops

or massage clinics.

• This may result in the rubber seal becoming deformed and water leakage,

Do not leave metal objects (safety pins, hair pins, etc.) or bleach in the tub for long periods of

time.

• This may cause the tub to rust.

• If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface

and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly in the tub and do not wash, rinse, or spin laundry

contaminated by dry cleaning detergent.

• This may result in spontaneous combustion or ignition due to heat from the oxidation of

the oil.

not use hot water from water cooling/heating devices.

This may result in problems with the washer.

not use natural hand-washing soap in the washer.

If it hardens and accumulates inside the washer, it may cause problems with the product,

discoloration, rust, or bad odors.

Do not wash large laundry items such as bedding in the washing net.

• Failing to do so may result in injury due to abnormal vibrations.

SAVE THESE iNSTRUCTiONS

English

\\TAS000J \\TA8700J "_\TA52J03133Y 01 ENindd 11 2015/4/20 15:33:41

Safety information

• Place smaller items, such as lace socks and lingerie in the washing net.

Do not use hardened detergent.

• If it accumulates inside the washer, it may result in water leakage.

Do not wash throw rugs or doormats.

• If you wash throw rugs or doormats, the sand will accumulate inside the washer. It may

result in error such as no draining.

CrRical cleaning warnings

/_ WARNING

Do not clean the appliance by spraying water directly onto it.

Do not use the strong acid cleaning agent.

Do not use benzene, paint thinner, or alcohol to clean the appliance.

• This may result in discoloration, deformation, damage, electric shock, or fire.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

• Failing to do so may result in electric shock or fire.

12 English

SAVE THESE INSTRUCTIONS

\\TAB000] \\TA8700J "_\TA52J 03133Y 01 ENindd 12 2015/4/20 15:33:41

Installation

Follow these instructions carefully to ensure proper installation of the washer and to prevent

accidents when using it.

Unpacking your washer

Unpack your washer and inspect it for shipping damage. Make sure you have received all the

items shown below. If your washer was damaged during shipping, or you do not have all of

the items, contact !-800-SAMSUNG (!-800-726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the

unit.

//_ WARNING

Packing materials can be dangerous to children; Keep all packing material (plastic bags,

polystyrene, etc.) well out of children's reach.

/'iX, CAUTION

When unpacking the washer, 2 person

collaboration is needed. To remove the

cushion bottom of the packing materials,

forward dumping is strictly prohibited.

English 13

WAS000J WA8700J "_\TA52J03133Y 01 EN indd 13 2015/4/20 15:33:41

Installation

Overview of your washer

Make sure all the parts are included in the product package. If you have a problem with

the washer or the parts, contact a local Samsung customer center or the retailer.

14 English

WA8000J_WA8700J_WA52J-03133Y-01_EN.indd 14 2015/4/20 15:33:41

01 Drain hose

04 Built-in sink

07 Leveling feet

10 Control panel

Parts supplied

02 Hose guide

05 Tub

08 Water hose (Cold)

11 Detergent drawer

03 Lid

06 Water Jet

09 Water hose (Hot)

12 Power cord

Hose guide

Parts not supplied

User manual

Plastic zip hose tie Water intake cap

Water supply hoses

Tools needed for installation

Wrench Flat screwdriver Leveller

NOTE

• If you lose an accessory and want to purchase a replacement, contact the Samsung

service center (I_-800-SAMSUNG (1_-800-726-7864)).

• The design of the parts and accessories may differ from the pictures above.

Their design is subject to change without notice for product improvement.

• Do not reuse old hoses. Only use new water supply hoses when you install the washer.

Old water supply hoses can leak or burst causing flooding and property damage.

• Confirm that there are rubber washers inside each coupling of the water supply hoses.

English

WAS000LWA8700J WA52J 0f_lltf_Y 01 ENJndd 15 2015/4/2(/ 15:1tf_:42

Installation

Basic location requirements

Electrical

• !20 Volt 60 Hz !5 AMP fuse or circuit

breaker.

• Individual branch circuit serving only

your Washer is recommended.

• Your washer is equipped with a power

cord.

/!X, CAUTION

Never use an extension cord.

Grounding

Electrical grounding is required for this

appliance.

This appliance must be grounded. In

the event of malfunction or breakdown,

grounding will reduce the risk of electric

shock by providing a path of least resistance

for electric current.

This appliance is equipped with a power

cord having a three-prong grounding plug

for use in a properly installed and grounded

outlet.

The plug must be plugged into an

appropriate outlet that is properly installed

and grounded in accordance with all local

codes and ordinances.

z_ WARNING

An improperly connected equipment-

grounding conductor can increase the risk

of electrical shock. Check with a qualified

electrician or serviceman if you are not sure

whether the appliance is properly grounded.

Do not modify the plug provided with the

appliance- if it does not fit the outlet, have

a proper outlet installed by a qualified

electrician.

Important safety precautions

To prevent unnecessary risk of fire,

electrical shock or personal injury, all wiring

and grounding must be done in accordance

with the National Electrical Code ANSI/

FNPA, No.70 Latest Revision and local

codes and ordinances. It is the personal

responsibility of the appliance owner to

provide adequate electrical service for this

appliance.

/_ CAUTION

Never connect the ground wire to plastic

plumbing lines, gas lines, or hot water pipes.

Water

To correctly fill your Washer in the proper

amount of time, water pressure of 20 to

!16psi (!37 to 800kPa) is required.

Water pressure less than 20 psi may cause

water valve failure, or may not allow the

water valve to shut off completely, or may

extend the fill time beyond what your

Washer controls allow, causing your Washer

to turn off. A time limit is built into the

controls to prevent flooding in your home if

a hose becomes loose.

16 English

WAS000LWA8700J WA52J 0f_lltf_Y 01 ENJndd 16 2015/4/2(/ 15:1tf_:42

The water faucets must be within 4 feet

(!22 cm) to the back of your Washer to

match the inlet hoses provided with your

Washer.

NOTE

Accessory inlet hoses are available in

various lengths up to !0 feet (275 cm) for

faucets that are further away from the back

of your washer.

To avoid the possibility of water damage:

• Have water faucets easily accessible.

• Turn off faucets when the washer is not

in use.

• Periodically check that there is no

leakage from the water inlet hose

fittings.

WARNING

Check all connections at the water valve and

faucet for leaks

Drain facility

The recommended height of the standpipe

is 39 in (99 cm). The drain hose must be

routed through the drain hose clip to the

standpipe. The standpipe must be large

enough to accept the outside diameter of

the drain hose. The drain hose is attached to

the washer at the factory.

Flooring

For best performance, you must install

your washer on a solidly constructed floor.

Wood floors may need to be reinforced to

minimize vibration and/or unbalanced load

situations. Carpeting and soft tile surfaces

are contributing factors to vibration which

can cause your washer to move slightly

during the spin cycle.

Never install your washer on a platform or

weakly supported structure.

Location considerations

Do not install your washer in areas where

water may freeze, since your washer will

always retain some water in its water valve,

pump, and hose areas. Frozen water can

damage the belts, the pump, hoses, and

other components.

Alcove or closet installation

Minimum clearances for closet and alcove

installations:

1 in / CloSet 2 in /

Sides

.... 25mm front 5! mm

,,.,_,.., 6 in / 21_in /

1_52mm 533 mm

If the washer and dryer are installed

together, the closet front must have at least

a 72 in2(465 cm2)unobstructed air opening.

Your washer alone does not require a

specific air opening.

English 17

WAS000J WA8700J "_VA52J 03133Y 01 EN indd 17 2015/4/20 15:33:43

Installation

Recessed area Side view - closet or confined area

_7¸¸¸ :::::::::::: <::::::::::::::::: :=:5:5:5:5:5:5:5:5:5:5:5:5 :F¸

A ! in (2.5 cm)

B 27.0 in (68.6 cm)

2! in (53.3 cm)

B 2 in (5.! cm)

C 29.3 in (74.4 cm)

D 6 in (!5.2 cm)

i _I i i

ii i i i

i i iii i_i

i i i

Gap between end of water

valve and the wall

• Case !. Assemble supply

hose after installing : Over

3.9 in (!0 cm).

• Case 2. Assemble supply

hose before installing :

Over 2.8 in (7 cm).

18 English

\VAS000J \VA8700J "_VA52J 03133Y 01 EN indd 18 2015/4/20 15:33:43

Required dimensions for Installation

...................... l

_ J

27.0 in (68.6 cm)

39.2 in (99.5 cm)

46.0 in (!!6.8 cm)

29.3 in (74.4 cm)

46.0 in (!1_6.8 cm)

59.8 in (1_52.0 cm)

48.0 in2 (31_0.0 cm2)

24.0 in2 (1_55.0 cm2)

3.0 in (7.6 cm)

NOTE

* Required spacing

English 19

\\TAS000J \\TA8700J "_\TA52J 03133Y 01 ENindd 19 2015/4/20 15:33:44

Installation

Important note to installer

Please read the following instructions carefully before installing your washer.

These instructions should be retained for future reference.

We recommend you hire a professional to install this washer.

Installation flow chart

Selecting a

location

Removing the

shipping bolts

(Front loading

washers only)

Connecting the

water and drain

Adjusting the

leveling feet

Powering your

washing machine

Running atest cycle

RunRinse±SpinWi_h

Smallamount Of -_ Running

laundry (aboUt 85 Calibration Mode

towels) as a test Cycle

YES y

Check again before steps.

Finishing the

installation

Step-by-step installation

STEP 1 Selecting a location

NOTE

Before you install the washer, make sure the location:

• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.

• Is away from direct sunlight.

• Has adequate ventilation.

• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 oC).

• Is away from heat sources such as oil or gas.

• Has enough space so that the washer doesn't rest on its power cord.

20 English

WAS000] WA8700J "_VA52J 03133Y 01 EN indd 20 2015/4/20 15:33:44

STEP 2 Connecting the water supply hose

/_ CAUTION

Before installing the water supply hoses,

make sure there are rubber gaskets (B)

inside the couplings (A) at both ends of each

new water hose. Installing the water supply

hoses without rubber gaskets can cause

water leakage.

/_ CAUTION

When you initially install the washer, be

sure to use new hoses. Failing to do so may

result in a water leakage or overflow and

may damage your property.

/'_ CAUTION

Do not connect multiple water supply hoses

together to increase the length of the supply

hose. Hoses connected this way can leak

and the leakage can cause electrical shock. If

a hose is too short, replace the hose with a

longer, high pressure hose.

English 21

WAS000J WA8700J "_\TA52J03133Y 01 EN indd 21 2015/4/20 15:33:44

Installation

Connect the ends of the water supply

hoses to the hot (B) and cold (A) faucets.

Tighten the fittings by hand until they

are snug, and then tighten them an

additional two-thirds of a turn with a

wrench.

/!_ CAUTION

When you fasten the fittings, do not fasten

them too tightly or apply tape or sealant to

the faucets or water supply intakes. This can

damage the fittings.

NOTE

After you have connected the water supply

hoses to the faucets, ensure that they are

connected correctly by pulling the water

supply hoses downwards.

3_ Place the unconnected ends of the hoses

into a bucket and open the faucets

connected to the two water supply hoses

for 10 or !5 seconds to remove any

foreign substances from the hoses. Close

the faucets before continuing.

22 English

WAS000J WA8700J "_\TA52J03133Y 01 ENindd 22 2015/4/20 15:33:45

& Connect the ends of the water supply

hoses to the water supply intake

connections at the back of the washer.

Z_ CAUTION

The water supply hose connected to the hot

faucet must be connected to the hot water

supply intake and the water hose connected

to the cold faucet must be connected to the

cold water supply intake.

Tighten the fittings by hand until they

are snug, and then tighten them an

additional two-thirds of a turn with a

wrench.

NOTE

To ensure the correct water usage, connect

both the hot and cold water faucets. If either

or both are not connected, an "4C" (no fill)

code can be displayed.

NOTE

If you do not want to use the hot water

supply hose, insert the water intake cap

into the hot water supply intake hole. In

this case, you must select the Tap Cold

for the water temperature. If you select

the Tap Cold, all the lamps for the water

temperature options are turned off.

//_ CAUTION

Confirm that the water supply hoses are not

twisted or bent. If the hoses are twisted or

bent, the hoses can leak and cause electric

shock due to the water leakage.

6, Turn on the hot and cold water supplies

and check all the water supply intake

connections and the faucets for water

leaks.

English 23

WAS000J WA8700J "_\TA52J03133Y 01 ENindd 23 2015/4/20 15:33:45

Installation

STEP 3

Connecting the drain hose

The end of the drain hose can be positioned

in three ways:

Over the edge of a wash basin

Secure the hose guide (A) to the side of the

basin wall with a hook or to the tap with

a piece of string to prevent the drain hose

from moving.

In a standpipe or laundry tub

The standpipe (B) and laundry tub (C) must

be no shorter than 39 in (99 cm)* and no

longer than 96 in (245 cm)*.

_ NOTE

• Make sure that the connection between

the drain hose and the standpipe is not

airtight.

• D: Hose retainer, E:Tie strap

24 English

\\TAB001)] \\TA8700J "_\TA52J 03133Y I)l EN indd 24 2015/4/2(} 15:33:46

NOTE

Connect the hose guide (A) within 4 in (!0

cm) _from the end of the drain hose. If the

drain hose is extended more than 4 in (!0

cm) beyond the end of the hose guide, mold

or microorganisms could spread to the

inside of the washer.

NOTE

The drain hose can be installed to a 95

in (245 cm) maximum, but the draining

capability can be reduced at this height.

It can cause the washer to have an odor

because of remaining water in the drain

system.

NOTE

If the drain hose is installed below 39 in (99

cm), water can be drained in cycles due to a

siphon phenomenon. It causes the washer to

display "4C".

STEP4

Leveling your washer

See if the washer is level by checking the

position of the tub:

1, Slide the washer into position.

2, Open the lid of the washer, and pour

the water into the tub to just below the

pulsator level.

NOTE

WA52JBT00A _models have the Built-in sink

over the pulsator level. That's why the level

is not revealed. Open the Built-in sink and

check the level with eyes.

English 25

\\TA800()] \\TAg700J "_\TA52J 1)3133Y 1)1 ENindd 25 2015/4/20 15:33:46

Installation

3, If the washer is level, the pulsator (A) is

positioned at the center of the water as

shown in the figure.

If not, level your washer by turning

the front leveling feet clockwise or

counterclockwise as necessary.

NOTE

Turn the front leveling feet clockwise (B) to

lower the washer, and counterclockwise (C)

to raise the washer.

STEP 5

Powering your washer

Plug the power cord into a 3-prong,

well grounded !20 volt 60 Hz approved

electrical outlet protected by a !5-amp fuse

or comparable circuit breaker.

Your washer is grounded through the third

prong of the power cord when plugged into

a three-prong grounded electrical outlet.

Test run

Make sure that you install your washer

correctly by running the Rinse+Spin after

the installation is complete.

26 English

WAS000J WA8700J "_\TA52J03133Y 01 EN indd 26 2015/4/20 15:33:46

STEP 6 Running a test cycle

Run a test cycle as follows to check if your washer is properly installed.

1. Load about 6 pounds of laundry into the tub.

2, Press Power to turn on your washer.

3. Select Rinse+Spin by turning the Cycle Selector.

4. Press Start/Pause to start the test cycle.

5. The washer should not rock or vibrate excessively when water is supplied or when

washing or spinning, and should drain well during the spin cycle.

NOTE

If water leaks while water is being supplied or drained, check the water connections. Refer to

the "STEP 2 Connecting the water supply hose" section on page 2! for instructions.

NOTE

If the washer rocks and vibrates excessively, level your washer again. Refer to the "STEP

4 Leveling your washer" section on page 25 for instructions.

STEP7 Calibration Mode

Your Samsung washer detects the laundry weight automatically.

For more accurate weight detection, please run Calibration Mode after the installation.

To run Calibration Mode, follow these steps:

1. Remove laundry or any contents in the machine.

2, Press and hold Temp. and Delay End simultaneously for at least 3 seconds when the

power is turned on.

3. Press Start/Pause to activate Calibration Mode.

4. The pulsator rotates clockwise and counterclockwise approximately 1 minute.

5. When Calibration Mode is finished, "End" appears on the display, and the washer

automatically turns off. The washer is now ready for use.

English 27

WAS000LWA8700J WA52J 0f_13f_Y 01 ENindd 27 2015/4/2(/ 15:3f_:47

Operating instructions

z_ WARNING

To reduce the risk of fire, electric shock, or injury to persons when using your appliance,

follow basic precautions, including the following:

Loading your washer

• You can fill the tub with dry, unfolded

clothes, but DO NOT OVERLOAD the tub

any more than 3/4 full.

• Overloading may reduce washing

efficiency, cause excess wear, and

possibly cause creasing or wrinkling of

the load.

• Wash delicate items such as bras,

hosiery, and other lingerie in the

Delicates cycle with similar lightweight

items.

• When washing big bulky items or a

few smaller items that don't fill the tub

completely - a rug, a pillow, stuffed toys,

or one or two sweaters, for example

- add a few towels to improve spin

performance.

• Do not insert bulky items except for

Bedding in this cycle.

NOTE

During the spin cycle, the washer may add

additional water to redistribute the clothes

and correct an imbalance inside the drum.

• When washing heavily soiled loads, do

not overload your washer to ensure

good cleaning results.

To add a forgotten item:

1, Press Start/Pause to pause the washer.

2, Wait for the door to unlock automatically, and then open the door.

3, Add the item, close the door, and then press Start/Pause. The cycle will resume.

28 English

WAS000J WA8700J _\TA52J 03133Y 01 ENindd 28 2015/4/20 15:33:47

Getting started

1. Load your washer.

2. Add liquid (or powder) detergent and additives to the dispenser (see the "Detergent use"

section on page 39).

3. Select the appropriate cycle and options for the load (see the "Washing a load of laundry"

section page 30).

4. Close the lid.

5. Press Start/Pause.

6. The Wash Indicator illuminates.

7. The estimated cycle time will appear in the display.

The time may fluctuate to indicate the time remaining in the cycle.

NOTE

The actual time required for a cycle may differ from the estimated time in the display

depending on the water pressure, water temperature, detergent, and laundry.

8. Before your washer starts to fill, it will make a series of clicking noises to check the door

lock and do a quick drain.

NOTE

• When the cycle is complete, the_ Door Lock indicator will go out and "End" will appear

in the display.

• Pressing Power cancels the cycle and stops your washer.

• The Wash, Rinse, and Spin indicators will illuminate during those portions of the cycle.

English 29

WAS000J WA8700J "_\TA52J03133Y 01 EN indd 29 2015/4/20 15:33:47

Washing a load of laundry

z_ WARNING

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY

INSTRUCTIONS before operating this appliance.

Control panel

SUPER SPEED

NORMAL

*(Hold 3 sec)

BRILLIANT WHITES

COLORS/DARKS -

HEAVY DUTY.

ACTIVE WEAR-

PERM PRESS

_m AquaJet r'_

*Smart Care

HEAVY DI

BRILLIANT WHITES.

COLORS/DARKS

PERM PRESS- _---'_

ACTIVE WEAR _'

DEEP

AquaJet '_

NORMAL

QUICK WASH

SPIN

*(Hold 3 sac)

Turn the Cycle Selector to select the desired cycle. The indicator by

01 Cycle Selector the cycle name lights up.

Provides instructions and diagnostics while keeping you updated on

02 Display the cycle status and time remaining.

30 English

WAS000] WA8700J "_VA52J 03133Y 01 EN indd 30 2015/4/20 15:33:47

Press the button repeatedly to cycle through the different water

temperature options.

• Extra Hot (WA52J8700A*) - Heavily soiled, colorfast items. Only

available with the Sanitize cycle.

• Hot- Whites and heavily soiled, colorfast items.

• Warm- Colorfast items.

• Eco Warm - Moderately soiled, colorfast items; most wrinkle-free

items.

• Cold - Brightly colored, very lightly soiled items.

• Tap Cold - Cold water with no warm water added.

NOTE

If you select the Tap Cold option, all the lamps for the water

temperature options are turned off. (WA52J8700A*)

Press the button repeatedly to cycle through the different spin speed

options.

• Extra High - Removes more water from loads during spin.

• High - Use for underwear, t-shirts, jeans, and sturdy cottons.

04 Spin • Medium - Use for jeans, wrinkle-free or wash-and-wear items, and

synthetics.

• Low- Use for delicate items needing a slow spin speed.

• No Spin- Drains your washer without spinning. Use for extremely

delicate items that cannot tolerate any spin.

Press the button to select the soil level/washing time.

(Light > _ > Normal > A > Heavy)

Heavy - For heavily soiled loads.

• A

05 Soil Level

• Normal - For moderately soiled loads. This setting is best for most

loads.

• y

• Light- For lightly soiled loads.

06 AquaJet TM Improve washing performance through longer AquaJet spray action.

Deep Clean Water Level can be adjusted.

Change from spray rinse mode to deep rinse mode, and rinse once

07 Extra Rinse

again.

To increase your energy savings on your wash cycles. (Less hot water

08 Eco Plus

consumption)

English 31

WAS001)J WA8700J "_\TA52J03133Y I)l EN indd 31 2015/4/20 15:33:48

Washing a load of laundry

09 Fabric Add an additional rinse at the end of the cycle to more thoroughly

Softener remove laundry additives and perfumes.

Press and hold for 3 seconds to save your own cycle.

My Cycle Create and/or use a cycle you have customized temperature, spin

speed, soil level, options, etc.

Delay the end of any cycle for up to !9 hours in one-hour increments.

11 Delay End Displayed hour indicates the time the wash will be ended.

Use to clean dirt and bacteria from the drum. Regular use (after every

12 Self Clean

20 washes) is recommended. No detergent or bleach is needed.

13 PreSoak It adds !S minutes soaking time at the start of the wash cycle for

better stain removal.

Press once to turn your washer on. Press again to turn your washer

14 Power off. If the washer is left on for more than 10 minutes without any

buttons being pressed, the power automatically turns off.

15 Start/Pause Press to pause and restart cycles.

Cycle overview

NOTE

To minimize wrinkling of laundry, select Perm Press.

For most fabrics including cottons, linens, and normally soiled

NORMAL

garments.

SUPER SPEED Lightly soiled and Normal Loads (up to 81b).

BRILLIANT WHITES For white fabrics with or without bleach.

COLORS@ARKS For brightly or dark colored casual garments.

HEAVY DUTY

ACTIVE WEAR

English

For sturdy, colorfast fabrics and heavily soiled garments. We

propose to use this function only when washing lot of heavily

soiled garments.

Use this cycle to wash exercise wear such as sports jerseys,

training pants, shirts/tops and other performance clothing. This

cycle provides effective soil removal with gentle action for

special fabric care.

\\TAS000J WA8700J "_\TA52J03133Y 01 ENindd 32 2015/4/20 15:33:48

PERM PRESS

DEEP STEAM

(WA52J8700A*)

SANITI7E ,

(WA52J8700A)

For wash-and-wear, synthetic fabrics, and lightly to normally

soiled garments.

For heavily soiled, colorfast garments, this cycle provides a high

washing temperature and steam and is effective for cleaning

stains.

For heavily soiled, colorfast garments. (less than !41bs)

NOTE

If you select pause during the heating portion of the Sanitize

Cycle, your Washer door will remain locked for your safety.

For waterproof, water-resistant items. (less than !41bs)

/!X CAUTION

Do not wash waterproof items and non-waterproof items

together.

QUICK WASH For lightly soiled garments needed quickly.

BEDDING

DELICATES

SPIN

RINSE + SPIN

Options

For bulky items such as blankets and sheets. When you are

washing comforters, use liquid detergent.

For sheer fabrics, bras, lingerie, silks, and other handwash-only

fabrics. For best results, use liquid detergent.

Drains the water and spins at a high speed.

Use for loads that need rinsing only or to add rinse-added

fabric softener to a load.

Child Lock

Child Lock prevents children from playing

with your washer.

Activating the Child Lock function

Press and hold Spin and Soil Level

simultaneously for approximately 3 seconds.

• When you activate the Child Lock

function, the I_ Child Lock indicator

blinks.

Using the Child Lock function

If the lid is opened when the Child Lock

function is on, "de" is displayed and an

alarm sounds.

English 33

\VAS0(/0] WA8700J "_VA52J 03133Y 01 ENindd 33 2015/4/20 15:33:48

Washing a load of laundry

• If the water level in the tub is above the

safe water level, "dC" is displayed on the

LED display and the washer starts to

drain water by force after 30 seconds.

• If the water level in the tub is above

the safe water level and the Child Lock

function is turned on while the door

is open, "CL" is displayed on the LED

display even if the power of the washer

is turned off and the washer drains

water by force.

• Even if the power of the washer is

turned off, if the lid is opened while the

water level in the tub is above the Reset

water level, "CL" is displayed on the LED

display without the alarm sounding and

the washer starts to drain water. When

the draining operation finishes, the

power is automatically turned off again.

• You have activated the Child Lock

function while the washer is running, the

Start/Pause button will not work.

• After the compulsory drain, the"CL"

blinks at ! second intervals and the

product enters the "CL" mode. (When

the product is in the"CL" mode, only the

Power button works.)

• To cancel the "CL" mode, you need to

turn the power off and then on again.

• To cancel the"dC" mode, deactivate the

Child Lock function. To deactivate the

Child Lock function, press and hold Spin

and Soil Level simultaneously for at least

3 seconds.

NOTE

Adding laundry when Child Lock is on

To add laundry, deactivate the Child Lock

function. To deactivate the Child Lock

function, press and hold Spin and Soil Level

simultaneously for at least 3 seconds. See

the "Pause Option" section on page 38 for

additional details.

Deactivating the Child Lock function

Press and hold both Spin and Soil Level

simultaneously for approximately 3 seconds.

• When you deactivate the Child Lock

function, the _ Child Lock indicator is

turned off.

• The Child Lock function prevents

children or the infrm from accidently

operating the washer and injuring

themselves.

z_ WARNIN6

If a child enters the washer, the child may

become trapped and suffocate.

/_ CAUTION

• Once you have activated the Child Lock

function, it continues working even if

the power is turned off.

• Forcing the lid open can result in injury

or damage to the product.

_ NOTE

To add laundry after you have activated

the Child Lock function, you must first

deactivate the Child Lock function.

Sound

The Sound Off function can be selected

during all cycles.

34 English

WAS000LWA8700J WA52J 0311t3Y 01 ENindd 34 2015/4/3(/ 15:1t3:48

Garment Plus

You can add or take out laundry items even

after the wash has started, as long as the

Garment Plus indicator is on. Pressing

Start/Pause unlocks the lid. If you open the

lid and want to continue the wash cycle,

close the lid, and then press Start/Pause.

NOTE

If you have activated the Child Lock, you

must deactivate it first. See page 33.

My Cycle

Lets you save a custom wash cycle

(temperature, spin, soil level, etc.) and

then recall and use it with one button

convenience.

To save a cycle and selected options as your

My Cycle, follow these steps:

1, Press Power.

2, Select a cycle using the Cycle Selector.

3, After cycle selection, set each option.

NOTE

See the "Cycle chart" section on page 63 for

available option settings with each cycle.

4, You can then store the selected cycle

and options by pressing and holding

My Cycle for longer than 3 seconds.

The cycle and options you select will be

displayed the next time you choose the

My Cycle function.

5, Press My Cycle to load and use the

saved My Cycle options. The "My Cycle"

light will indicate activation. Also, the

chosen cycle and option lights will

flicker.

NOTE

You can change the My Cycle settings by

repeating the process above.

The last saved settings will be displayed the

next time you choose the My Cycle function.

_ NOTE

If you press My Cycle and release it within

3 seconds, the previously saved cycle and

options appear. If you press and hold My

Cycle for 3 second or longer, the currently

set cycle and options are saved and the LED

blinks for 3 seconds.

Delay End

You can set the washer to start your wash

automatically at a later time, by choosing a

delay time.

The hour displayed indicates the time at

which the wash will be ended.

1, Set your wash cycle.

2, Press Delay End repeatedly until the

delay time is set.

3, Press Start/Pause. The "Delay End"

indicator will be lit, and the clock will

begin counting down until it reaches the

set time.

4, To cancel a Delay End function, press the

Power button and then turn the washer

on again.

Pre Soak

Use this function when the laundry is

heavily contaminated or stained. This

function improves the wash performance by

adding a Pre Soak cycle.

• If you select this function, the total cycle

time is increased by 1_5minutes.

English 35

WAS000] WA8700J WA52J 031lt3Y I)l ENindd 35 2015/4/20 15:1t3:49

Washing a load of laundry

• When the Pre Soak cycle starts, the

washer repeats a wash cycle after

supplying water and then performs a

1_5-minute soak cycle.

• When the Pre Soak cycle is complete,

the configured wash cycle starts without

draining water.

AquaJet TM

With a strong spray and soapy water

recirculated by the AquaJet TMpump, laundry

can be more gently and thoroughly cleaned

than in conventional Top Loads.

• AquaJet TMDeep Clean: IfAquaJet _ Deep

Clean is selected, washing performance

can be further improved by the

additional spray action. Sufficient water

quantity can be ensured by adjusting the

water level.

NORMAL, SUPER

SPEED, BRILLIANT

WH ITES,COLORS/

BARKS, HEAVY

DUTY, SANITIZE

(WA52J8700A*),

DEEP STEAM

(WA52J87OOA*),

ACTIVE WEAR, PERM

PRESS,RINSE+SPIN

WATERPROOF, QUICK

WASH, BEDDING,

DELICATES,SPIN

Available

Not available

E¢o Plus

This function sets the temperature

somewhat lower than the typical washing

cycle and extends the wash time slightly.

With laundry time slightly extended, it's

possible to keep the same level of washing

performance with cooler water. This function

reduces energy consumption and maintains

the quality of the wash.

Mist Shower

Mist Shower sprays water from a nozzle

that is independent of the main water

supply system. It states that is soaks the

laundry with water from the beginning of

the rinse cycle and ensures an effective

wash, but it's not part of the wash cycle, it's

part of the rinse cycle, so this needs to state

that it ensures an effective rinse.

(The Mist Shower function may not work if

there is too large of a load in the machine.)

Smart Care

This function enables you to check the

status of the washer using a smartphone.

1, To enable the Smart Care function, press

and hold Pre Soak for 3 seconds after

turning the power on or when an error

occurs,

NOTE

The error code history is deleted after you

use this function.

2, The Smart Care indicator is lit on the

display.

3, Run the Smart Care app on your smart

phone.

36 English

\\TAS000J \\TA8700J "_\TA52J 03133Y 01 EN indd 36 2015/4/20 15:33:49

• Android: Galaxy S series, Galaxy

Note series. (Other devices may not

be normal operation).

Supported OS :Android 2.2 or higher

• iOS: iPhone series

Supported OS : iOS 4.3 or higher

4, Focus your smart phone's camera on the

display panel of the washer.

5, If the smart phone's camera is focused

on the display panel of the washer, the

panel and error message is automatically

recognized and the error type and

countermeasures are displayed on the

smart phone.

6, If the smartphone fails to recognize the

error code more than twice, please enter

the error code displayed on the display

panel of the washer manually into the

Smart Care app.

NOTE

Downloading the Smart Care app

• Download theSamsung LaundryApp

into your mobile phone from the

Android market or Apple App store.

(Search word : Samsung Smart Washer/

Dryer)

NOTE

Precautions when using Smart Care

• If light from a light bulb, fluorescent

bulb, or lamp is reflected on the display

panel of the washer, the smartphone

may not be able to recognize the panel

or error message easily.

• If you hold the smartphone at too

large an angle relative to the front of

the display panel, it may not be able

to recognize the error code. For best

results, hold the smartphone so that the

front of the panel and the smartphone

are parallel or nearly parallel.

Washing clothes using the cycle selector

Your new washer makes washing clothes

easy, using Samsung's "Fuzzy Control"

automatic control system. When you select

a wash program, the machine will set the

correct temperature, washing time, and

washing speed.

1, Press Power.

2, Open the lid.

3, Load the articles of clothing one at a

time loosely into the drum, without

overfilling it.

4, Add liquid (or powder) detergent,

softener, and/or bleach (if necessary) to

the appropriate compartments. See the

"Detergent use" section on page 39.

5, Close the lid.

6, Use the Cycle Selector to select the

appropriate cycle according to the type

of material: NORMAL, HEAVY DUTY,

SANITIZE (WA52J8700A*), DEEP STEAM

(WA52J8700A*), COLORS/DARKS, PERM

PRESS,ACTIVE WEAR, SUPER SPEED,

BRILLIANT WHITE, WATERPROOF,

BEDDING, QUICK WASH, DELICATES,

SPIN, and RINSE+SPIN. The relevant

indicators will illuminate on the control

panel.

7, At this time, you can control the wash

temperature, the number of rinse cycles,

the spinning speed, and the delay time

by pressing the appropriate option

button.

English

WAS000LWA8700J WA52J I)f_lltf_Y I)l ENindd Z/7 2015/4/2(/ 15:1tf_:49

Washing a load of laundry

Press Start/Pause and the wash will

begin. The process indicator will light up

and the remaining time for the cycle will

appear in the display.

Pause Option

To remove or add laundry items, follow

these steps:

1, Press Start/Pause to unlock the lid.

NOTE

The lid cannot be opened when the water is

too HOT.

2, Remove or add laundry items.

3, Close the lid, and then press Start/Pause

to restart the wash.

NOTE

If you have Child Lock on, you must

deactivate it first. See page 33.

When the cycle is finished:

After the total cycle has finished, the power

will turn off automatically.

1, Open the lid.

2, Remove laundry.

.aT(::(Auto Temperature Control)

ATC is the control function that the

washer controls water temperature with

temperature sensor (thermistor).

NOTE

Because there are numerous water

temperatures depending on the customer's

environments (cold areas, warm areas,

various water temperatures, settings of

heater temperature, etc.), ATC function in our

washer maintains the certain level of wash

temperature to output the best washing

performance at each cycle.

NOTE

If you select NORMAL cycle, this cycle is the

regulation and UL cycle. Since new washers

must reduce the amount of energy usage as

a first priority, customers will notice more

cold water entering the washer. But, this is

normal, not a problem.

In those regulation cycles, Hot temperature

is similar to acceptable adult bath-water

temperature and warm temperature is

similar to comfortable swimming-pool water

temperature.

38 English

WAS000J WA8700J _\TA52J 03133Y 01 ENindd 38 2015/4/20 15:33:50

NOTE

If customers want to wash clothes in specific

water temperatures, customers should

choose a different cycle at each temperature

(Hot/Warm/Eco Warm).

English 39

\\TAS000J \\TA8700J "_\TA52J03133Y 01 ENindd 39 2015/4/20 15:33:50

Washing a load of laundry

The basics (WA52J8700A*)

Prewash (Water Jet & Built-in sink)

Water Jet and Built-in sink help you

handwash before the washing machine

starts operation. Water Jet is available only

when the door is open with the water level

set to less than High. For prewashing, use

the Built-in sink that is designed to facilitate

the hand-wash.

1, With the door open, lower the Built-in

sink. To open only the door, press and

release the front right corner of the

door. To close and lock both the door

and the Built-in sink, press down the

door until you hear a clicking sound.

2. Put clothes to prewash in it.

3. Press Water Jet to supply water to the

Built-in sink, and hand-wash.

4, When done, gently lift up the Built-in

sink to drain water into the tub.

NOTE

• If you want to hand-wash while the

machine is operating, press Start/Pause

to stop operation, and then follow steps

!-4 above.

• If you open both the door and the

Builtin sink, lower the Built-in sink

manually for prewashing.

[Water Jet stops]

• Water Jet stops operation automatically

when the washing machine detects the

maximum water level.

• Water Jet stops operation automatically

5 minutes after it begins. To add more

water, press Water Jet again to resupply

water.

40 English

\\TAS000J \\TA8700J "_\TA52J 03133Y 01 EN indd 40 2015/4/2(} 15:33:5(}

[Water Jet drains]

• Select a cycle and press Start/Pause. Then

the washing machine drains the water to be

used during the prewash.

• When the washing machine is turned off

before starting the wash cycle, it drains

the water to be used during the prewash.

However, when it is turned off during the

wash cycle, it does not drain the water.

NOTE

Water Jet extracts the water through the

Mist Shower nozzle for ! second and then

through the Water Jet nozzle from then on

when it is first activated after the washing

machine turns on.

z_ CAUTION

• Do not abuse Water Jet. Excessive use of

Water Jet increases water consumption.

• When running water to the tub, do that

gently. Otherwise, water may overflow the

tub.

• Use caution when removing laundry from

the tub. You may bump your head on the

Built-in sink.

• Do not block the outlet of Water Jet with

hands. Water may leak outside the tub,

causing a system failure.

• Put only clothes to prewash in the Built-in

sink. Other items such as shoes, food, or

animals can not be used for prewash.

• Do not open the Built-in sink in a hurry.

Remaining water in the sink may splash on

the door or control panel.

• Due to a difference in air pressure, Water Jet

may splash water from its outlet when it is

first activated.

• This lid must be closed tightly to do the

laundry.

English 41

WAS000] WA8700J WA52J 03133Y 01 ZNindd 4] 2015/4/20 15:33:51

Washing a load of laundry

Detergent use

Your washer is designed to use high

efficiency (HE) detergents.

• For the best cleaning results, use a high

efficiency detergent such as Tide HE,

Wisk HE, Cheer HE or Gain HEr High

efficiency detergents contain suds

suppressors that reduce or eliminate

suds. When fewer suds are produced,

the load tumbles more efficiently and

cleaning is maximized. (* Brand names

are trademarks of their respective

manufacturers.)

/_ WARNING

Regular detergent is not recommended. Use

HE detergents only.

NOTE

Reducing the amount of detergent

may reduce the quality of cleaning. It

is important to pre-treat stains, sort

carefully by color and soil level, and avoid

overloading.

42 English

\\TA800()] \\TAg700J "_\TA52J 1)3133Y 1)1 ENindd 42 2015/4/20 15:33:51

Features

Automatic dispenser

Your washer has separate compartments for dispensing detergent and color-safe bleach and

fabric softener. Add all laundry additives to their respective compartments before starting

your washer.

The automatic dispenser must always be in place before you start your washer.

DO NOT open the automatic dispenser when your washer is running.

NOTE

• Never exceed the manufacturer's recommendations when adding detergent.

• This compartment holds liquid detergent for the main wash cycle, which is added to the

load at the beginning of the cycle.

• When using powdered detergent, remove the liquid detergent compartment from the

detergent drawer. The washer will not dispense powdered detergent from the liquid

detergent compartment.

To add detergent to the automatic dispenser:

1. Open the dispenser drawer.

2. Load the recommended amount of liquid

(or powder) detergent into the detergent

compartment before you start your

wash.

3, Close the drawer slowly and smoothly

to avoid spilling, splashing, or premature

dispensing of the contents.

NOTE

It is normal for a small amount of water to

remain in the dispenser compartments at

the end of the cycle.

NOTE

Do not put chlorine bleach in the dispenser

drawer.

English 43

\\TAg000J \\TAg700J "_\TA52J 03133Y 01 ENindd 43 2015/4/20 15:33:51

Washing a load of laundry

Loading the Liquid (or Powder) detergent compartment

1, Pour the recommended amount of

laundry detergent directly into the

detergent compartment before starting

your washer.

2, If you are using color-safe bleach, add

it with the detergent to the detergent

compartment.

NOTE

When adding color-safe bleach with

detergent, it is best if both laundry products

are in the same form - liquid.

NOTE

When using powdered detergent, remove

the liquid detergent compartment (A) from

the detergent drawer. The washer will not

dispense powdered detergent from the

liquid detergent compartment.

44 English

\\TAg000J \\TAg700J "_\TA52J 03133Y 01 ENindd 44 2015/4/20 15:33:51

Loading the Bleach compartment (WA52J8060A*)

z_ CAUTION

Use the liquid chlorine bleach only.

1, Add chlorine bleach to the bleach

compartment (B).

DO NOT exceed the MAX FILL line.

NOTE

Avoid splashing or over-filling the

compartment.

Your washer automatically dispenses

bleach into the tub at the appropriate

time.

The dispenser automatically dilutes

liquid chlorine bleach before it reaches

the wash load.

• Never pour undiluted liquid chlorine

bleach directly onto the load or into

the tub. It is a powerful chemical and

can cause fabric damage, such as

weakening of the fibers or color loss,

if not used properly.

• If you prefer to use color-safe,

non-chlorine bleach, add it to the

appropriate detergent compartment.

DO NOT pour color-safe bleach into

the Bleach compartment.

English 45

\\TAB001)] \\TA8700J "_\TA52J I)3133Y I)l ENindd 45 2015/4/20 15:33:52

Washing a load of laundry

Loading the Bleach compartment (WA52J8700A*)

,,_ CAUTION

Use the liquid chlorine bleach only.

1. Add chlorine bleach to the bleach

compartment (B).

DO NOT exceed the bleach compartment.

NOTE

• Avoid splashing or over-filling the

compartment.

• Never pour undiluted liquid chlorine

bleach directly onto the load or into the

tub. It is a powerful chemical and can

cause fabric damage, such as weakening

of the fibers or color loss, if not used

properly.

• If you prefer to use color-safe, non-

chlorine bleach, add it to the appropriate

detergent compartment.

DO NOT pour color-safe bleach into the

Bleach compartment.

46 English

\\TAg000] \\TAg700J "_\TA52J 03133Y 01 ENindd 46 2015/4/20 15:33:53

Loading the fabric softener compartment

1, Pour the recommended amount of

liquid fabric softener into the softener

compartment (C).

For smaller loads, use less than one

capful.

2, Dilute the fabric softener with water

until it reaches MAX FILL in the

compartment.

3, The dispenser automatically releases

liquid fabric softener at the proper time

during the rinse cycle.

NOTE

• Use the softener compartment ONLY for

liquid fabric softeners.

• DO NOT use the Downy Ball _in the

fabric softener compartment with this

washer. It will not add fabric softener at

the appropriate time.

Use the detergent compartment.

(_Brand names are trademarks of their

respective manufacturers.)

• Do not use liquid fabric softener that

is too sticky as it may not mix with the

water sufficiently.

English 47

WAS(/00LWA870(/J WA52J 0:_I3:_Y 01 ENindd 47 2015/4/20 15:3_:5)

Maintaining your washer

Cleaning the exterior

Turn off the water faucets after finishing

the day's washing.

This will shut off the water supply to

your washer and prevent the unlikely

possibility of damage from escaping

water. Leave the lid open to allow the

inside of your washer to dry out.

Use a soft cloth to wipe up all detergent,

bleach or other spills as they occur.

Clean the following as recommended:

Control Panel - Clean with a soft, damp

cloth. Do not use abrasive powders or

cleaning pads. Do not spray cleaners

directly on the panel.

Cleaning the interior

Clean the interior of your washer

periodically to remove any dirt, soil, odor,

mold, mildew, or bacterial residue that

may remain in your washer as a result of

washing clothes.

Failure to follow these instructions may

result in unpleasant conditions, including

odors and/or permanent stains on your

washer or laundry.

Hard water deposits may be removed, if

needed. Use cleaners labeled "Washer safe".

Storing your washer

Washers can be damaged if water is

not removed from hoses and internal

components before storage.

Prepare your washer for storage as follows:

1, Select the Quick Wash cycle and add

bleach to the automatic dispenser. Run

your washer through the cycle without

a load.

2, Turn the water faucets off and

disconnect the inlet hoses.

3, Unplug your washer from the electrical

outlet and leave your washer lid open to

let air circulate inside the drum.

If your washer has been stored in

below-freezing temperatures, allow time

for any leftover water in your washer to

thaw out before use.

48 English

WAS000LWA8700J WA52J 0:_I3:_Y 01 ENindd 48 2015/4/20 15:3_:5)

Preserving the top cover and the front frame

Do not place any heavy or sharp objects or

a detergent box on the washer. They can

scratch or damage the top cover of the unit.

NOTE

Since the entire washer has a high-gloss

finish, the surface can be scratched or

damaged.

Avoid scratching or damaging the surface

when using the washer.

Cleaning the dispensers

The automatic dispenser may need to be

cleaned periodically due to laundry additive

buildup.

1, Pull the dispenser drawer straight back

until it stops.

2_ Push the ends of each side of the case at

the same time.

When you feel the ends push, pull out

the dispenser drawer.

English 49

WAS000J WA8700J "_\TA52J03133Y 01 ENindd 49 2015/4/20 15:33:53

Maintaining your washer

3_ Remove the inserts from the 3

compartments. Rinse the inserts and

the drawer with warm water to remove

traces of accumulated laundry products.

To clean the drawer opening, use a

small, non-metal brush to clean the

recess. Remove all residue from the

upper and lower parts of the recess.

Return the inserts to the proper

compartments and replace the drawer

by placing the dispenser drawer rail (B)

on top of the compartment rail (A) (Tilt

the dispenser drawer downward and

insert it).

Then push the drawer in firmly and

slowly.

50 English

\\TAS000J \\TA8700J "_\TA52J 03133Y 01 EN indd 50 2015/4/20 15:33:54

Self Clean

Sel_ean

Self Clean is a self-cleaning cycle that

removes mold that may occur inside the

washer.

1. Press Power.

2. Select Self Clean.

Once Self Clean is selected, the only

function that can be set is Delay End.

3. Press Start/Pause.

Self Clean begins.

/ix, CAUTION

• Using Self Clean, you can clean the drum

without using a cleansing agent.

• Never use Self Clean when laundry is

in the washer. This may cause damage

tn th_ l_11nr_rw nr _ nrnhl_rn \^lith th_

L_J LII_ lUUIIUI y UI U IJIULJI_III VVILII LII_

washer.

Self Clean Auto Indicator function

.ooo ,oc oo.oo l

l_ ChIId LocE I I I l'l I I l I

cC-_+Garment Plus ":"::'-- _ _ -- ":":"I

,_,.Self Clean Wash Rinse Spin EndJ

• If the_Self Clean indicator is lit after

a wash, it indicates that tub (drum)

cleaning is required. In this case, remove

the laundry from the washer, turn

the power on, and clean the drum by

running Self Clean.

• If you do not run Self Clean, the_Self

Clean indicator turns off. However, the

Self Clean indicator will light again

after two washes. Not running Self Clean

at this point will not cause a problem

with the washer.

• Although the_Self Clean indicator is lit

once a month or so, the frequency may

differ depending on the number of times

the washer is used.

English 51[

WA8000J_WA8700J_WA52J-03133Y-01_EN.indd 51 2015/4/20 15:33:55

Troubleshooting

Checkpoints

If you encounter a problem with the washer, first check the table below and try the

suggestions.

Does not turn on.

Does not start.

Water is not supplied.

After a cycle,

detergent remains

in the automat c

dispenser.

• Make sure you use rated power for the product.

• Make sure the power cord is completely plugged in.

• Check the fuse or reset the circuit breaker.

Make sure

machine.

Make sureo

the door is closed.

the water taps are open.

to press or tap Start/Pause to start the washing

Child Lock is not activated.

Before the washing machine starts to fill, it will make a series

of clicking noises to check the door lock and does a quick

drain.

• Was the door opened during the spinning cycle? Close the

door, and press or tap Start/Pause to resume.

• The machine enters Standby or is in a soaking cycle. Please

wait.

• Check the fuse or reset the circuit breaker

sure you press or tap Start/Pause after selecting the

supply.

sure the water taps are open.

filter net at the water supply hose connector clogged?

the filter net by brushing with a toothbrush.

• Make

water

• Make

• Is the

Clean

• Is the water supply cut off? If the water supply is cut off, close

the tap and power off.

• Straighten the water supply hoses.

• Open and close the door, then press or tap Start/Pause.

• If the water pressure is low, it takes longer to start washing.

• If the water level is not as high as necessary or lower than

expected, use the level selector to adjust the water level.

• Make sure the washing machine is running with sufficient

water pressure.

• Make sure the detergent drawer is properly inserted.

• Remove and clean the detergent drawer, and then try again.

52 English

\VAS0(/I/] WA8700J "_VA52J 1/3133Y Ill ENindd 52 2015/4/20 15:33:55

excessively , i

Vibrates

or mares noise.

I •

Make sure the washing machine is set on a level floor. If the

floor is not level, use the levelling feet to adjust the washing

machine.

Make sure the washing machine is not contacting any other

object.

Make sure the laundry load is balanced.

Make sure the laundry is spread evenly in the washing

machine. Spread out the laundry evenly and start again.

MaRe sure the space around the washing machine is free of

objects.

Humming is produced normally during operation.

Objects such as coins can cause noise. Remove these objects

from the washing machine after washing is complete.

Plug the power cord into a live electrical outlet.

Check the fuse or reset the circuit breaker.

Close the door, and press or tap Start/Pause to start the

washing machine. For your safety, the washing machine will

not spin unless the door is closed.

Before the washing machine starts to fill, it will make a series

of clicking noises to check the door lock and does a quick

drain.

There may be a pause or soak period in the cycle. Wait briefly

and the washing machine may start.

MaRe sure the inlet hose screens at the taps are not clogged.

Periodically clean the screens.

This problem occurs temporarily due to low voltages, and will

be solved when power recovers.

English 53

WAS0(}0J WA8700J "_\TA52J03133Y 01 ENindd 53 2015/4/20 15:33:55

Troubleshooting

Fills with the wrong

temperature water.

Door (Lid) locked or

will not open

Does not drain and/

Load is wet at the end

of the cycle.

• Fully open both water taps.

• Make sure the temperature selection is correct.

• Make sure the hoses are connected to the correct water taps.

Flush water lines.

• Disconnect the hoses and clean the screens. The hose filter

screens may be clogged.

• While the washing machine fills, the water temperature may

change as the automatic temperature control feature checks

incoming water temperature. This is normal.

• While the washing machine fills, you may notice just hot and/

or just cold water going through the dispenser when cold or

warm temperatures are selected.

This is a normal function of the automatic temperature

control feature as the washing machine determines the water

temperature.

While the washing machine is operating, press or tap Start/

Pause to stop the washing machine.

It may take a few moments for the door lock mechanism to

disengage.

Check the fuse or reset the circuit breaker.

Make sure the electrical voltage is normal.

Make sure the washing machine is plugged in.

Make sure the drain hose is pointed downward. (Natural drain

models only)

Make sure the drain hose is not clogged.

Make sure the drain hose is not kinked.

Straighten the drain hose. If there is a drain restriction, call for

service.

Close the door, and press or tap Start/Pause. For your safety,

the washing machine will not spin unless the door is closed.

Use the High or Extra High spin speed. (Applicable model

only)

Use high efficiency (HE) detergent to reduce oversudsing.

Load is too small. Small loads (one or two items) may become

unbalanced and not spin completely.

54 English

\\TAg000J \\TAg700J "_\TA52J 03133Y 01 ENindd 54 2015/4/20 15:33:55

Make sure all hose connections are tight.

Make sure the water supply hose's rubber packing is in the

correct position. Screw tightly again.

Make sure the end of the drain hose is correctly inserted and

secured to the drain system.

Avoid overloading.

Excessive suds.

The spin basket or

drain/supply hose is

frozen.

n •

Water drains out

immediately.

Stains on clothes.

Use high efficiency (HE) detergent to prevent oversudsing.

Make sure the water supply hose is not kinked.

If the water supply is too strong, water may leak. Close the

water tap a little.

Make sure water is not leaking from the water tap. If so,

repair the water tap.

Use high efficiency (HE) detergent to prevent oversudsing.

Reduce the detergent amount for soft water, small loads, or

lightly soiled loads.

Non-HE detergent is not recommended.

Use warm water to disconnect the water supply hose and

drain hose. Soak them in warm water.

Fill the spin basket with warm water, and then wait for about

!0 minutes.

Put a hot towel on the drain hose connector.

Reconnect the water supply hose and drain hose, and check if

water is supplied properly.

Make sure the drain hose is not clogged, and is hung over the

drain hose hook. Fill the spin basket halfway with water, and

try spinning again.

Lift the end of the drain hose to prevent water from draining.

Fill the spin basket halfway with water, and then run spinning

after releasing the drain hose.

Make sure the drain hose is installed correctly. See the

installation section of this user manual and adjust the position

of the drain hose as instructed.

Clean the magic filter.

English 55

WAS000J WA8700J "_\TA52J03133Y 01 ENindd 55 2015/4/20 15:33:55

Troubleshooting

Has odours.

• Excessive suds collect in recesses and can cause foul odours.

• Run cleansing cycles to sanitize periodically.

• Dry the washing machine interior after a cycle has finished.

If a problem persists, contact a local Samsung service center.

Information codes

The washer may display information codes to help you understand what is occurring with

_our washer better.

¸¸¸¸¸¸¸¸¸¸2:::

i_ i _I _

i ¸

i i i

4 _

The WaterLevel sensor is not working properly.

• Check WaterLevel Sensor wire harness.

• If the information code remains, contact a customer service

centre.

4C .

NOTE

When the washer displays"lC", the washer do draining for 3

minutes. During this time, the Power button is inoperative.

Check the motor for operation.

• Try restarting the cycle.

• If the problem continues, call for service.

Water is not supplied.

• Make sure the water taps are open.

• Make sure the water hoses are not clogged.

• Make sure the water taps are not frozen.

• Make sure the washing machine is operating with sufficient

water pressure.

Make sure that the cold water tap and the hot water tap are

properly connected.

• Clean the mesh filter as it may be clogged.

NOTE

When the washer displays "4C", the washer do draining for 3

minutes. During this time, the Power button is inoperative.

56 English

WAS000J WA8700J "_\TA52J03133Y 01 ENindd 56 2015/4/20 15:33:55

ii i ii

il ii_ ii:

if: ii : :i_i__

i 8

iiiill _ii

i ¸10¸¸¸¸¸¸¸

4C2

9C!

9C2

AC6

• Make sure the cold water supply hose is firmly connected to the

cold water tap.

If it is connected to the hot water tap, the laundry may be

deformed with some cycles.

Water is not draining.

• Make sure the drain hose is not frozen or clogged.

• Make sure the drain hose is positioned correctly, depending on

the connection type.

• Clean the debris filter as it may be clogged.

• Make sure the drain hose is straightened all the way to the

drain system.

• If the information code remains, contact a customer service

centre.

The electronic control needs to be checked (Over Voltage Error).

• Check the PCB and wire harness.

• Check if power is supplied properly.

• If the information code remains, contact a customer service

centre.

Low voltage detected

• Check if the power cord is plugged in.

• If the information code remains, contact a customer service

centre.

Inverter Communication problem

• Check the Inverter PCB and wire harness.

• If the information code remains, contact a customer service

centre.

Operating the washer with the door open.

• Make sure the door is properly closed.

• Make sure laundry is not caught in the door.

High temperature heating check.

• If the information code remains, contact a customer service

centre.

English 57

\\TAS000J \\TA8700J "_\TA52J 03133Y 01 ENindd 57 2015/4/20 15:33:55

Troubleshooting

i _iii

ill_Zii_ii_i i i i_ii

ii_i ii ii

il_ii _ _ _

Check the drain hose.

• Make sure the end of the drain hose is placed on the floor.

• Make sure the drain hose is not clogged.

• If the information code remains, contact a customer service

centre.

NOTE

When the washer displays "LC",the washer do draining for 3

minutes. During this time, the Power button is inoperative.

Water is overflowed.

° Restart after spinning.

° If the information code remains on the display, contact a local

Samsung service centre.

When position of the clutch can't be detected.

13 PC • If the information code remains, contact a customer service

centre.

PC1

After position of the clutch is detected, if the signal of the clutch

hall goes wrong.

• If the information code remains, contact a customer service

centre.

Spinning does not work.

° Make sure laundry is spread out evenly.

• Make sure the washing machine is on a fiat, stable surface.

• Redistribute the load. If only one item of clothing needs

washing, such as a bathrobe or pair of jeans, the final spin result

might be unsatisfactory, and an "Ub" check message will be

1, shown in the display.

For any codes not listed above, call !-800-725-7854 (!-800-SAMSUNG).

58 English

WAS000] WA8700J "_\TA52J03133Y 01 ENindd 58 2015/4/20 15:33:55

Specifications

Fabric care chart

The following symbols provide garment care

direction. The clothing care labels include

symbols for drying, bleaching, drying and

ironing, or dry cleaning when necessary. The

use of symbols ensures consistency among

garment manufacturers of domestic and

imported items. Follow care label directions

to optimize garment life and reduce

laundering problems.

Wash cycle

Normal

Permanent press/Wrinkle

resistant/Wrinkle control

Oentle/Delicates

Hand wash

Water temperature

..... Hot

,. Warm

...... Cold

The clothes washer can not ensure

these temperatures because the actual

temperature of the water entering your

washer depends on water heater settings

and regional water supply temperatures. For

example, cold water entering the home in

the northern states during winter may be

40 °F / 4 °Cwhich is too cold for effective

cleaning. In this situation, you will need to

adjust the water temperature by selecting

a warm setting, adding some hot water to

the MAX FILL line, or using your Washer's

heating option, if available.

Bleach

Any bleach (when needed)

Only non-chlorine (color-safe)

m bleach (when needed)

Tumble dry

Normal

Permanent press/Wrinkle

resistant/Wrinkle control

Oentle/Del icates

Special instructions

Line dry/Hang to dry

Uri p dry

Dry flat

NOTE

This represents appropriate wash water

temperatures for various items. The

temperature range for Hot is !05 °- !25 °F

/ 41 °- 52 °C, for Warm 85 °- !05 °F /

29 ° - 41_°C and for Cold 60 ° - 85 °F / 1_6°

- 29 °C.(Wash water temperature must be

a minimum of 60 °F / 1_6°C for detergent

activation and effective cleaning.)

English 59

\\TAS000J \\TA8700J "_\TA52J 03133Y 01 ENindd 59 2015/4/20 15:33:57

Specifications

Heat setting Dry-clean

High

Q Medium

Low

Any heat

No heat/Air

Iron dry or steam temperatures

High

Medium

Low

Warning symbols for laundering

Do not wash

Do not wring

Do not bleach

Do not tumble dry

No steam (added to iron)

Do not iron

Dry-clean

Do not dry-clean

Line dry / Hang to dry

Drip dry

Dry fiat

60 English

WAS000J WA8700J _\TA52J 03133Y 01 EN indd 60 2015/4/20 15:33:59

Helping the environment

Your washer is manufactured from

recyclable materials. If you decide to

dispose of it, please observe local waste

disposal regulations. Cut off the power

cord so that the appliance cannot be

connected to a power source. Remove

the lid so that animals and small children

cannot get trapped inside the appliance.

• Do not exceed the detergent quantities

recommended in the detergent

manufacturers' instructions.

• Use stain removal products and bleaches

before the wash cycle only when

necessary.

• Save water and electricity by only

washing full loads (the exact amount

depends upon the program used).

Declaration of conformity

This appliance complies with UL21_57.

English 61

WAS000] WA8700J WA52J 03133Y 01 ENJndd 61 2015/4/20 15:33:59

Specifications

Sped_cation sheet

Model name

D mensions B. Width

(inches (cm)) C Height with lid open

Water pressure (psi (kPa))

NET weight (kg (Ib))

Spin revolution

Washing

Heater rating Spin

Drain

WA52J8060A* WA52J8700A*

46,0 (! !6.8)

27,0 (68.6)

59.8 (152,0)

29,3 (74,4)

20- !!6 (!37- 800)

66 (!45.5) 67 (!47.7)

!20 V

120 V

!20 V

!!00 rpm

700 W

400 W

80 W

62 English

\VAS000LWA8700J "_VA52J 03133Y 01 ENindd 62 2015/4/20 15:33:59

Cycle chart

Use this chart to set the best cycle and options for you laundry.

WA52J8060A*

NOTE

o: factory setting

®: can be selected

H: Hot

W: Warm

EW: Eco Warm

C: Cold

TO:Tap Cold

ii@i iii iii!ii`i i!iii iiiiii !ii:ii ii}! IiIiii!ii !i i ! i i; i !IiIi IiI IIIIIIIIIIiI

EH: Extra High

H: High

M: Medium

L: Low

NS: No Spin

ii !!ii !iili !i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!ilii i,iiiil

H: Heavy

N: Normal

L: Light

NORMAL ® ® ® ® ® ® ® ® ® ® ® ® ® ®

SUPER SPEED @ ® @ @ @ @ ® @ @ @ @ @ @ @ ®

BRILLIANT WHITES ® ® ® ® ® ® ® ® ® ® ® ® ® ® ®

COLORS!DARKS @ ® @ @ @ ® @ @ @ @ @ ® @ @

HEAVY DUTY ® ® ® ® ® ® ® ® ® ® ® ® ® ® ®

ACTIVE WEAR @ ® @ @ @ @ ® @ @ @ @ ®

PERM PRESS ® ® ® ® ® ® ® ® ® ® ® ® ® ® ®

WATERPROOF ® ® ® ® ® ® ® ® ® ® ® ®

QUICK wAsH ® ® ® ® ® ® ® ® ® ® ® ® ® ® ®

BEDDING @ ® @ @ @ @ ® @ @ @ @ ® @ @

DELICATES @ ® @ @ @ ® @ ®

SPIN ® ® ® ® ®

RiNSE+SPIN ® ® ® ® ®

SELF CLEAN ® ®

NORMAL

SUPER SPEED

BRILLIANT WHITES

COLORS!DARKS

HEAVY DUTY

ACTIVE WEAR

PERM PRESS

WATERPROOF

QUICK WASH

BEDDING

DELICATES

@ @ ® @ @ @

@ @ @ @ @

@ @ @ @ @ @ @

@ @ @ @ ®

@ @ @ @

® @ @ @ @

@ @ @ @

_re

English 63

WAS000] WA8700J "_VA52J 03133Y 01 ENindd 63 2015/4/20 15:33:59

Specifications

SPIN

RiNSE+SPIN

SELF CLEAN

@ @

@ @ @ @ @

@ @

64 English

\\TAS000J \\TA8700J "_\TA52J 03133Y 01 ENindd 64 2015/4/20 15:33:59

Cycle chart

Use this chart to set the best cycle and options for you laundry.

WA52J8700A*

NOTE

o: factory setting

®: can be selected

!!i i!i i iil!i!:!iilii iiiiii!ii

EH: Extra Hot

H: Hot

W: Warm

EW: Eco Warm

C:Cold

TC: Tap Cold

EH: Extra High

H: High

M: Medium

L: Low

NS: No Spin

ii !!ii !iili !i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!ilii i,iiiil

H: Heavy

N: Normal

L: Light

NORMAL ® ® ® ® ® ®

SUPER SPEED ® ® ® ® ®

BRILLIANT WHITES ® ® ® ® ®

COLORS!DARKS ® ® ® ®

HEAVY DUTY ® ® ® ® ®

ACTIVE WEAR @ ® @ @

PERM PRESS ® ® @ @ ®

SANITIZE ®

DEEP STEAM ®

WATERPROOF ® ® ® ® ®

QUICK WASH ® ® ® ® ®

BEDDING @ ® @ @ @

DELICATES @ ® @ @

SPIN

RINSE+SPIN

SELF CLEAN ®

@ ® @ @

@ ® @ @ @

® @ @ @ @

@ ® @ @ @

® @ @ @ @

@ @ ® @ @

@ ® @ @ @

® @ @ @ @

@ ® @ @ @

® @

@ ® @ @ @

@ ® @ @

@ ® @

@ ® @ @ @

@ ® @ @

@ @ @ ®

@ @ @ @

@ ® @ @

@ @ @ @

@ @ ®

@ ® @ @

@ @ @ @

@ ® @ @

@ @ @ ®

@ ® @ @

NORMAL

SUPER SPEED

BRILLIANT WHITES

COLORS!DARKS

HEAVY DUTY

ACTIVE WEAR

PERM PRESS

SANITIZE

DEEP STEAM

English

WAS000J WA8700J "_\TA52J03133Y 01 ENindd 65 2015/4/20 15:33:59

Specifications

WATERPROOF

OUICKWASH

BEDDING

DELICATES

SPIN

RINSE+SPIN

SELF CLEAN

@ @ @

66 English

\\TAS000] \\TA8700J _VA52J 03133Y 01 ENindd 66 2015/4/2(} 15:34:00

Warranty (U.S.A)

SAMSUNG WASHER

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS

AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer

purchaser, is warranted by SAMSUNG against manufacturing defects in materials and

workmanship for a limited warranty period of:

One (!) year part and labor, Two (2) years Control Board Parts (Part Only), Three (3) years

stainless tub part (Part Only), Ten (!0) years washing DD motor part (Part Only).

This limited warranty begins on the original date of purchase, and is valid only on products

purchased and used in the United States. To receive warranty service, the purchaser must

contact SAMSUNO for problem determination and service procedures. Warranty service can

only be performed by a SAMSUNO authorized service center. The original dated bill of sale

must be presented upon request as proof of purchase to SAMSUNO or SAMSUNO's authorized

service center. SAMSUNO will provide in-home service during the warranty period at no

charge, subject to availability within the contiguous United States. In-home service is not

available in all areas.

To receive in-home service, product must be unobstructed and accessible to the service

agent. If service is not available, SAMSUNG may elect to provide transportation of the

product to and from an authorized service center.

SAMSUNG will repair, replace, or refund this product at our option and at no charge as

stipulated herein, with new or reconditioned parts or products if found to be defective during

the limited warranty period specified above. All replaced parts and products become the

property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products

assume the remaining original warranty, or ninety (90) days, whichever is longer.This limited

warranty covers manufacturing defects in materials and workmanship encountered in

normal, noncommercial use of this product and shall not apply to the following: damage that

occurs in shipment; delivery and installation; applications and uses for which this product

was not intended; altered product or serial numbers; cosmetic damage or exterior finish;

accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products,

equipment, systems, utilities, services, parts, supplies, accessories, applications, installations,

repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage

this product or result in service problems; incorrect electrical line voltage, fluctuations and

surges; customer adjustments and failure to follow operating instructions, maintenance and

environmental instructions that are covered and prescribed in the instruction book; product

removal and reinstallation; problems caused by pest infestations.

English 67

WAS(/00LWA870(/J WA52J 0:_Ilt:_Y 01 ENindd 67 2015/4/20 15:1t4:00

Warranty (U.S.A)

This limited warranty does not cover problems resulting from incorrect electric current,

voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions,

or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation

of the product.

EXCEPTAS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER

EXPRESSOR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT

LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS

FOR A PARTICULAR PURPOSE.

NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH

RESPECTTO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE

LIABLE FOR LOSSOF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER

BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY

THE USE, MISUSE, OR INABILITY TO USETHIS PRODUCT,REGARDLESSOF THE LEGAL THEORY

ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

NOR SHALL RECOVERYOF ANY KIND AGAINST SAMSUNG BE GREATERIN AMOUNT THAN

THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED

DAMAGE.

WITHOUT LIMITING THE FOREGOING, PURCHASERASSUMES ALL RISK AND LIABILITY

FOR LOSS,DAMAGE, OR INJURY TO PURCHASER AND PURCHASER'SPROPERTY AND TO

OTHERSAND THEIR PROPERTYARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE

THIS PRODUCT.THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN

THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATESYOUR

EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion

or limitation of incidental or consequential damages, so the above limitations or exclusions

may not apply to you. This warranty gives you specific rights, and you may also have other

rights, which vary from state to state.

68 English

WAS000LWA8700J WA52J 0:_Ilt:_Y 01 ENJndd 68 2015/4/20 15:1t4:00

To obtain warranty service, please contact SAMSUNG at:

Samsung Electronics America Inc.

85 Challenger Road

Ridgefield Park, NJ 07660

1-800-SAMSUNG (726-7864

www.samsung.com/us/support

Visits by a Service Engineer to explain functions, maintenance or installation is not

covered by warranty.

Please contact your Samsung call agent for help with any of these issues.

English 69

WA8000LWA8700J WA52J 0311t3Y 01 ENindd 69 2015/4/20 15:1t4:00

Warranty (CANADA)

SAMSUNG WASHER

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS

CANADA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer

purchaser, is warranted by SAMSUNG against manufacturing defects in materials and

workmanship for a limited warranty period of:

One (!) year part and labor, Ten (!0) years washing DD motor (Part only).

This limited warranty begins on the original date of purchase, and is valid only on products

purchased and used in the Canada. To receive warranty service, the purchaser must contact

SAMSUNO for problem determination and service procedures. Warranty service can only be

performed by a SAMSUNO authorized service center. The original dated bill of sale must be

presented upon request as proof of purchase to SAMSUNO or SAMSUNO's authorized service

center. SAMSUNO will provide in-home service during the warranty period at no charge,

subject to availability within the Canada. In-home service is not available in all areas.