FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:
- ATTENTION: If your equipment has a power cord with a grounding plug, it must be
connected to a wall outlet with a ground connection. Never remove the grounding plug
from the power cord.
- If your equipment has been exposed to extreme temperature changes, allow it to reach
room temperature before turning it on. Otherwise, moisture and condensation may
damage the equipment.
- Before plugging in the equipment, make sure that the voltage and frequency of the
power outlet match the specifications of the equipment. If the equipment has a voltage
selector, only connect it to the power outlet if the values match. If the power cord or
adapter does not fit your outlet, contact an electrician.
- Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or
equipment connection.
- Keep the power cord or adapter within reach and disconnect the equipment from the
power supply when not in use or when cleaning it. Always unplug the cord or adapter by
pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
- Avoid frequently turning the equipment on and off, as this can reduce its useful life.
- IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse
repeatedly blows, contact an authorized service center.
- To completely disconnect the equipment from the power mains, unplug the power cord
or adapter from the outlet.
- If your device has a Volex power connector, the mating Volex connector must be
unlocked before it can be removed. Be careful when laying cables, as the equipment can
slide or fall if the power cord is pulled.
- Unplug the power cord or adapter before an extended period of disuse or in case of
lightning strike risk.
- Only install the equipment when it is disconnected from the power source.
- To prevent damage and overheating, qualified personnel should regularly clean and
service the equipment depending on ambient conditions like dust, nicotine, and fog.
If the product contains the following symbols, please, read carefully:
IMPORTANT INFORMATION
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This equipment is designed for professional purposes and its commercial use must
comply with the applicable national rules and regulations for accident prevention.
As the manufacturer of this product, Audibax has the responsibility to inform you about
the potential health risks associated with its use. One such risk is hearing damage caused
by prolonged exposure to high volume.
When this product is in use, it can generate high sound-pressure levels that may cause
irreversible hearing damage to performers, employees, and audience members.
To prevent this, it is important to avoid exposing yourself or others to volumes exceeding
90 dB for an extended period of time.
CAUTION
Risk of Electric
Shock.
Disconnect all
power sources
before servicing
CAUTION: To reduce the risk of electric shock, do not remove cover (or
back). There are no user serviceable parts inside. Maintenance and repairs
should be exclusively carried out by qualified service personnel.
The warning triangle with lightning symbol indicates dangerous
uninsulated voltage inside the unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating
and maintenance instructions.
PARTY 12 / PARTY 15
www.audibax.com 2www.audibax.com 9
PARTY 12 / PARTY 15
INSTRUCIONES DEL PANEL DE CONTROL
9. Indicador de límite y potencia
Indicador de límite: cuando la energía es demasiado, el indicador de límite se iluminará,
baje el volumen
Indicador de encendido: encienda la máquina, el indicador de encendido estará
encendido.
10. Interruptor LED.
Encender/apagar la iluminación RGB en el frontal.
11. Interruptor de encendido
Encender/apagar la máquina.
12. Toma de CA y portafusibles
Utilice el cable de alimentación correcto para obtener el voltaje correcto de la fuente de
alimentación de CA.
Reemplace el fusible con la especificación correcta cuando el fusible esté roto en el
portafusibles.
13. Instrucción de reproductor MP3
(1) Modo
Presione el botón Modo para elegir los modos de trabajo en el reproductor de mp3 como
USB/SD/FM/Bluetooth
(2) Reproducir/Pausar
Presione este botón para reproducir el reproductor de mp3 o pausar el reproductor de
mp3 cuando el reproductor de mp3 funcione en modo FM, presione este botón para
1. Mic In (XLR & 1/4” jack)
Estas entradas se utilizan para conectar el cable
del micrófono para obtener la señal del micrófono
dinámico.
2. Line in (XLR & RCA)
Estas entradas se utilizan para conectar el cable
de audio para obtener la señal del reproductor de
CD u otros dispositivos.
3. Line out
Estas salidas se utilizan para enchufar el cable de
audio para enviar la señal a otra caja de altavoz
activa o amplificadores.
4. MP3 Vol
Este potenciómetro se utiliza para controlar la
salida de volumen del reproductor de mp3.
5. Mic Vol
Este potenciómetro se usa para controlar la salida
de volumen de la entrada de micrófono.
6. Line Vol
Este potenciómetro se utiliza para controlar la
salida de volumen de la entrada de micro o línea
(CD / AUX).
7. Main Volume
Este potenciómetro se utiliza para ajustar el
volumen de salida total.
8. Ecualizador de 2 bandas
Agudos: este potenciómetro se utiliza para ajustar
la salida de volumen de alta frecuencia
Bajo: este potenciómetro se utiliza para ajustar la
salida de volumen de baja frecuencia.