Commercial Electric 1004060729 Guía de instalación

Marca: Commercial Electric

Modelo: 1004060729

Tipo: Guía de instalación

USE AND CARE GUIDE

LINKABLE LED STRIP LIGHTS

WITH SELECTABLE COLOR TEMPERATURE

Questions, problems, missing parts? Before returning to the store,

call Commercial Electric Customer Service

8 a.m. – 7 p.m., EST, Monday - Friday

9 a.m. – 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

THANK YOU

We appreciate the trust and conﬁdence you have placed in Commercial Electric through the purchase of this LED light.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your

home improvement needs. Thank you for choosing Commercial Electric!

Item # 1004060729 1004060730

Model # 54263211 54263291

54261211 54261291

Table of Contents

Table of Contents ...................................2

Safety Information ..................................2

Warranty ..........................................2

Pre-Installation .....................................3

Planning Installation ...............................3

Tools/Hardware Required ............................3

Package Contents .................................3

Hardware Included .................................4

Additional Parts Available to Purchase .................4

Installation ........................................5

Surface Mounting .................................5

Suspension Mounting ..............................9

Linking Feature ....................................12

Adjusting the Color Temperature of the Light ............13

Care and Cleaning .................................13

Troubleshooting ...................................13

Safety Information

WARNING: Carefully read and understand the information given in

this manual before beginning the assembly and installation. Failure to

do so could lead to electric shock, ﬁre, or other injuries which could be

hazardous or even fatal.

WARNING: Ensure the electricity to the wires you are working on is

shut off. Either remove the fuse or turn off the circuit breaker.

WARNING: This portable luminaire has a grounding type attachment

plug as a feature to reduce the risk of electric shock. This plug will ﬁt in

a polarized outlet only one way. If the plug does not ﬁt fully in the outlet,

reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician.

Never use with an extension cord unless plug can be fully inserted. Do not

alter the plug.

CAUTION: For safety, linked strip lights can either be installed as plug-

in or direct wire, but never combined.

NOTICE: Connect up to a maximum of 30 strip lights (Model 54263211) or 15 strip

lights (Model 54261211). Do not exceed 300 total watts for interconnected lights.

NOTICE: When using the power cord, the maximum distance to the electrical

receptacle is determined by the 5 ft. power cord length.

NOTICE: Do not use this ﬁxture with a dimmer switch.

NOTICE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules.

These limits are designed to provide reasonable protection

against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

□Reorient or relocate the receiving antenna.

□Increase the separation between the equipment and the

receiver.

□Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

□Consult the dealer or an experienced radio/TV technician for

help.

CAUTION: Changes or modiﬁcations not expressly

approved by the party responsible for compliance

could void the user’s authority to operate the

equipment.

Warranty

WHAT IS COVERED

The manufacturer warrants this light ﬁxture to be free from defects in materials and workmanship for a period of ﬁve (5) years from

date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If

this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the

product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modiﬁcations,

alterations, neglect, or mishandling.

WHAT IS NOT COVERED

This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance

with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse,

abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not

apply to the ﬁnish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.

The manufacturer does not warrant and speciﬁcally disclaims any warranty, whether express or implied, of ﬁtness for a particular purpose,

other than the warranty contained herein. The manufacturer speciﬁcally disclaims any liability and shall not be liable for any consequential

or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.

Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

TOOLS/HARDWARE REQUIRED

Tools and hardware required vary by type of installation.

Wire

Strippers

Safety

Goggles Ladder Gloves

Measuring

Tape

Phillips

Screwdriver

Electrical

Tape

Power Drill with

drill bits

Cord Clips Toggle Bolts* Hook Screws* Chains with

S hooks*

PACKAGE CONTENTS

Part Description Quantity

A Lens Cover 1

B Fixture Body 1

Pre-Installation

PLANNING INSTALLATION

Before beginning assembly, installation, or operation of product, make sure all parts are present. Compare parts with the Hardware

Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact

Customer Service for replacement parts.

NOTE: Keep your receipt and these instructions for proof of purchase.

If you are unfamiliar with electrical installations, we recommend you contact a qualiﬁed electrician to do the installation.

CAUTION: Chains/cables and hooks must have weight bearing capacity exceeding 11 lbs.(5 KG). S hooks must be ≤ 0.1 in. (2.5 mm).

NOTE: Eye hooks can be used as an alternate method of attaching the ﬁxture to the ceiling when suspension mounting.

* For Suspension Mounting only

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

AA Mounting Screw 2

BB Drywall Anchor 2

CC End Cover 2

DD End-to-end Connector 1

EE Linking Cable (12 in.) 1

FF Power Cord with ON/OFF

Switch (5 ft.)

GG Cable Tie 1

ADDITIONAL PARTS AVAILABLE TO PURCHASE

NOTE: The hardware kit for surface mounting is sold as a separate accessory. Visit www.HomeDepot.com for more information and to

purchase.

NOTE: Separate parts not shown to actual size.

Part Description Quantity SKU

HH Electrical Box Plate 1 1001471759*

II Electrical Box Screw 2

* Required for Surface Mounting

Part Description Quantity SKU

JJ Linking Cable (5 ft.) 1 1001471760

AA BB

5 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

1 Separating the lens cover from the ﬁxture body

□Press the sides of the ﬁxture body (B) inward, in the direction of the arrows, and remove the lens cover (A) with the other hand.

2 Preparing the ﬁxture for installation

□After separating the lens cover (A) from the ﬁxture body (B), unplug the wire connector to disconnect the

terminal wires.

With power disconnected to the electrical box, remove the existing ﬁxture. Make a sketch of how the current ﬁxture is wired (by wire color)

or mark the wires with masking tape and a pencil so you will know how to properly reconnect the wires to the new LED light ﬁxture.

Select a suitable location that can support the weight of the ﬁxture. Determine the method for mounting the ﬁxture before drilling, based on

the type of ceiling.

WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off

the circuit breaker before removing an existing light ﬁxture or installing the new one.

Wire Connector

Surface Mounting

Installation

4 Preparing to mount the ﬁxture

□Drill a 1/8-in. pilot hole into the screw locations marked on the ceiling. You can also use an awl or nail to dimple the screw holes.

□Install a drywall anchor (BB) and a mounting screw (AA) in each drilled mounting hole, but do not tighten fully.

3 Removing one of the knock outs in the ﬁxture

□Hold the ﬁxture body (B) up to the mounting surface to determine which knock out hole to use for wiring the ﬁxture.

□Mark two keyhole locations on the mounting surface.

□Using a screwdriver, punch out one of the large knock out holes in the ﬁxture body (B) for wiring, based on the installation position.

Keyholes

Surface Mounting (continued)

Knock Out Holes

Keyholes

Knock Out Holes

7 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

5 Attaching the electrical box plate

□Feed the electrical wires from the electrical box through the

center of the electrical box plate (HH - not included).

□Secure the electrical box plate (HH - not included) to the electrical

box with the electrical box screws (II - not included).

NOTE: The hardware kit for surface mounting is sold as a separate

accessory. Visit www.HomeDepot.com for more information and to

purchase.

6 Mounting the light ﬁxture

□Feed the electrical wires from the electrical box through the open knock out hole in the ﬁxture body (B).

□Align the two mounting keyholes on the ﬁxture body (B) with the two mounting screws (AA) in the ceiling.

□Once the screw heads are through the large ends of the keyholes, slide the ﬁxture body (B) to the left until the heads of the

mounting screws (AA) slide into the narrow ends of the keyholes.

□Finish tightening the mounting screws (AA) until the ﬁxture body (B) is tightly secured to the mounting surface.

AA AA

Surface Mounting (continued)

Keyholes

7 Making the electrical connections

□Insert the hot and neutral (black and white) wires from the electrical box into the wire connectors of the same color wires

from the ﬁxture body (B).

□Insert the ground wire from the electrical box into the wire connector attached to the green wire from the ﬁxture body (B).

□Reconnect the terminal wires with the attached wire connector.

8 Completing the installation

□Snap the lens cover (A) onto the ﬁxture body (B).

□Restore the power to the electrical box.

□Turn on the light switch to activate the ﬁxture.

Wire Connector

Surface Mounting (continued)

9 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

1 Mounting to drywall

□Drill two holes large enough to clear the closed ﬂaps of

the butterﬂy nut on the toggle bolt (not included). Make

sure to fasten the toggle bolt into the butterﬂy nut

before inserting the ﬂaps into the ceiling.

□Tighten the toggle bolt.

NOTE: Separate mounting hardware (not included) not shown to actual size.

NOTE: When determining the desired location for suspension mounting the light ﬁxture using the plug-in installation method, make sure the

light ﬁxture is located directly below the electrical outlet and that the distance between the electrical outlet and the end of the light ﬁxture is

less than 5 ft.

NOTE: If using eye hooks in the ceiling instead, attach the

chain with S hooks.

2 Mounting to wood

□Drill two 1/16 in. diameter holes in the ceiling to

accommodate hook screws (not included). Make sure to

fasten the combo wood-machine end into the metal hook.

□Tighten the hook screws (not included) into the wood.

NOTE: If using eye hooks in the ceiling instead, attach

the chain with S hooks.

For mounting to drywall:

Toggle bolt x 2 Part Description Quantity

Toggle Bolts Consisting of a No. 10-24 bolt 2-7/8 inches long with two

tapered wings 1 by 5/16 inch. 2

Studs Measuring 1-3/4 inches overall and having 1-1/4 inches of

wood screw threads on one end and at least six No. 10-24

machine screw threads on the other end.

Metal Hooks With a No. 10-24 threaded hole that engages the bolt threads. 2

For mounting to wood:

Hook screw x 2

NOTE: Eye hooks can be used as an alternate method of attaching the ﬁxture to the ceiling.

Suspension Mounting

3 Attaching the light to the chain

□Attach the S hook at the bottom of the mounting

chain (not included) to the ﬁxture body (B). Repeat

this step on the other side of the ﬁxture.

4 Attaching the chain to the ceiling

□Hang the ﬁxture body (B) by placing one chain over each

hook (not included) that has been installed on the ceiling.

□Adjust chains to level light.

NOTE: If using eye hooks in the ceiling instead, attach the top

of the chain with S hooks.

NOTE: Product should be suspended using metal chain or

cable and hooks with weight bearing capacity exceeding 11 lbs

(5 KG). S hooks must be ≤ 0.1 in. (2.5 mm) to ﬁt the holes in the

ﬁxture body (B).

Suspension Mounting (continued)

11 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

NOTE: When suspension mounting using the plug-in installation method, make sure the light ﬁxture is located directly below the electrical

outlet and that the distance between the electrical outlet and the end of the light ﬁxture is less than 5 ft.

5 Connecting the power cord

NOTE: Make sure the distance between the electrical outlet and the end of the light ﬁxture is less than 5 ft. when using the plug-in

installation method.

□Remove the end cover (CC) from the strip light.

□Plug the power cord (FF) into the end of the ﬁxture body (B) and then plug the other end of the power cord (FF) into

an electrical outlet.

□Secure the power cord (FF) to the ceiling using cord clips or cable raceway (not included).

□Attach the power cord (FF) to the chain with the cable tie (GG) provided.

□Turn the power on to activate the light ﬁxture.

Suspension Mounting (continued)

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power to the strip light before linking additional strip lights.

□Multiple light ﬁxtures can be connected, but only the ﬁrst light ﬁxture needs to be plugged into an electrical outlet or direct wired to

an electrical box.

WARNING: Provide power to the ﬁxtures only after all linking connections have been made.

□Remove the end cover (CC) from one end of each ﬁxture body (B) that will be linked.

□Firmly and fully insert either the end-to-end connector (DD) or linking cable (EE) into the open receptacle in the end of each ﬁxture

body (B).

NOTICE: When using the linking cable (EE), the maximum distance between two light ﬁxtures is 12 in. using the linking cable (EE) provided, or 5 ft.

using the 5-ft. linking cable (II) available as a separate accessory.

WARNING: RISK OF ELECTRIC SHOCK. If the receptacle on the end of the strip light is not used to link to another ﬁxture, the receptacle needs

to be closed by the end cover (CC). Do not touch live parts inside the receptacle.

□Connect up to a maximum of 30 strip lights. Do not exceed 300 total watts for interconnected lights. The table shows the maximum

quantity of linkable strip lights that can be connected, based on wattage.

Model Length Wattage Maximum # of Connected Strip Lights

54263211 2 ft. 10W 30

54261211 4 ft. 20W 15

CAUTION: If using linking cable to connect strip lights, afﬁx the linking cable to the ceiling using cord clips or cable raceway (not included).

CAUTION: For safety, linked strip lights can either be installed as plug-in or direct wire, but never a combination of both.

Linking Feature

13 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

3K - 4K - 5K

Adjusting the Color Temperature of the Light

Care and Cleaning

CAUTION: Before attempting to clean the ﬁxture, disconnect the power to the ﬁxture by turning the breaker off or removing the fuse from the

fuse box.

□Clean the ﬁxture with a soft, dry cloth.

□Do not use cleaners with chemicals, solvents, or harsh abrasives.

□Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the ﬁxture.

Troubleshooting

WARNING: Before doing any work on the ﬁxture, disconnect power to the light ﬁxture.

Minor problems often can be ﬁxed without the help of an electrician.

Problem Possible Cause Solution

The ﬁxture will not light. The power is off. Ensure the power supply is on.

The circuit breaker is off. Ensure the circuit breaker is in the on position.

There is a bad connection. Check to ensure proper wire connections are made.

Contact a qualiﬁed electrician.

There is a defective switch. Contact a qualiﬁed electrician.

The fuse blows or the circuit breaker

trips when the light is turned on. The wires are crossed or the power

wire is grounding out.

Check the wire connections.

Contact a qualiﬁed electrician or call Commercial

Electric customer service 1-877-527-0313.

This LED light ﬁxture allows you to customize the color temperature of the light using three settings: soft white, bright white, or daylight.

□Move the toggle switch on the ﬁxture body (B) to choose your favorite correlated color temperature (CCT) from three options:

3000k Soft White, 4000k Bright White, or 5000k Daylight.

NOTE: The factory setting for the correlated color temperature (CCT) is 3000K, which is the warmest white light.

Questions, problems, missing parts? Before returning to the store,

call Commercial Electric Customer Service

8 a.m.-6 p.m., EST, Monday-Friday

1-877-527-0313

Homedepot.Com

Retain this manual for future use.

GUÍA DE USO Y CUIDADO

BARRAS DE LUZ LED ENLAZABLES

CON TEMPERATURA DE COLOR DE LUZ AJUSTABLE

¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda,

llame al Centro de Atención al Cliente de Commercial Electric en el horario de

8 a.m. – 7 p.m., Hora del Este de EE.UU., de lunes a viernes.

9 a.m. – 6 p.m., Hora del Este de EE.UU., sábados.

1-877-527-0313

HOMEDEPOT.COM

GRACIAS

Apreciamos la conﬁanza que ha puesto en Commercial Electric a través de la compra de esta luz LED.

Nos esforzamos por crear constantemente productos diseñados para realzar su hogar. Visítenos en línea para ver

nuestra gama completa de productos disponibles para sus necesidades al momento de hacer mejoras en su hogar.

¡Muchas gracias por elegir a Commercial Electric!

Artículo # 1004060729

1004060730

Modelo # 54263211

54261211

Contenido

Contenido ........................................16

Informacíon sobre seguridad .........................16

Garantía. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Previo a la instalación ..............................17

Planiﬁcacíon de la instalacíon .......................17

Herramientas/materiales necesarias ..................17

Contenido del paquete. ............................17

Materiales incluidos ...............................18

Piezas adicionales disponibles para comprar ...........18

Instalación .......................................18

Montaje en superﬁcie .............................18

Instalación suspendida ............................23

Función de enlace ..................................26

Ajustar la temperatura del color del luz ................27

Cuidado y limpieza .................................27

Solucíon de problemas ..............................27

Informacíon sobre seguridad

ADVERTENCIA: Lea cuidadosamente y comprenda la información

incluida en este manual antes de comenzar el armado e instalación. No

hacerlo puede provocar descarga eléctrica, incendio, u otras lesiones que

pueden ser graves or mortales.

ADVERTENCIA: Asegúrese de cortar el suministro eléctrico en los cables

con los que trabajará. Extraiga los fusibles o apague el cortacircuitos.

ADVERTENCIA: Esta lámpara portátil tiene un enchufe con conexión a

tierra para reducir el riesgo de descarga eléctrica. Este enchufe encajará

en una toma de corriente polarizada de una sola manera. Si el enchufe no

encaja completamente en la toma, invierta el enchufe. Si aún no encaja,

comuníquese con un electricista caliﬁcado. Nunca lo use con un cable de

extensión a menos que el enchufe pueda insertarse completamente. No

modiﬁque el enchufe.

PRECAUCIÓN: Por seguridad, las barras de luz enlaces pueden ser

instalado como cable enchufable o directo, pero nunca combinado.

AVISO: Puede conectar hasta un máximo de 30 barras (Modelo 54263211) o

15 barras (Modelo 54261211). No exceda de 300 vatios en total para lámparas

interconectadas.

AVISO: Cuando se utiliza el cable de alimentación, la distancia máxima al

receptáculo eléctrico se determina por la longitud del cable de alimentación de 5 pies.

AVISO: No use esta lámpara con un interruptor atenuador.

AVISO: Este equipo ha sido sometido a prueba y se halló

que cumple con los límites establecidos para la clase B de

dispositivos digitales, conforme a la Parte 15 de las Normas

de FCC.

Estos límites se establecen para brindar protección razonable

contra interferencia dañina en una instalación residencial.

Este equipo genera, utiliza y puede irradiar energía de

frecuencias de radio y, si no se instala conforme a las

instrucciones, puede provocar interferencia dañina a las

comunicaciones de radio.

A pesar de esto, no existe garantía de que la interferencia no

se produzca en una instalación en particular.

Si este equipo produce interferencia dañina a la recepción de

radio o televisión, lo que puede determinarse encendiendo y

apagando el equipo, se insta al usuario a intentar corregir la

interferencia mediante uno de los siguientes métodos:

□Cambie la orientación o ubicación de la antena receptora.

□Aumente la separación entre el equipo y el receptor.

□Conecte el equipo en un enchufe que esté en un circuito

diferente al cual está conectado el receptor.

□Consulte con el representante o con un técnico

experimentado en radio y televisión para solicitar

asistencia.

PRECAUCIÓN: Los cambios o modiﬁcaciones

que no estén expresamente aprobados por la parte

responsable del cumplimiento anulan la autoridad

del usuario de operar el equipo.

Garantía

CUBRE

El fabricante garantiza que este aparato de iluminación no tendrá defectos en los materiales o en la mano de obra por un periodo de cinco (5) años

desde la fecha de compra. Esta garantía se aplica sólo al comprador consumidor original y sólo a los productos que se utilizan y reciben servicio en

forma normal. Si se encuentra que este producto tiene defectos, la única obligación del fabricante, y su exclusiva solución, es reparar o reemplazar el

producto a su entera discreción, siempre y cuando el producto no se haya dañado debido al mal uso, abuso, accidente, modiﬁcaciones, alteraciones,

negligencias o mal manejo del mismo.

NO CUBRE

Esta garantía no se aplica a ningún producto que se ha instalado incorrectamente, ajustado o utilizado en una forma que no concuerde con las

instrucciones suministradas junto con el producto. Esta garantía no se aplicará a fallas del producto como resultado de un accidente, uso incorrecto,

abuso, negligencia, alteración, instalación defectuosa, o ninguna otra falla no relacionada con el material o mano de obra defectuosa. Esta garantía no

se aplica a la terminación en una parte del producto, tales como la superﬁcie o la acción de los elementos, ya que esto se considera desgaste normal.

El fabricante no garantiza y no acepta responsabilidad, ya sea, expresa o implícita de la idoneidad para un ﬁn particular, a excepción de la

garantía contenida en el presente. El fabricante niega especíﬁcamente responsabilidad y no será responsable por daños o pérdidas indirectas o

consecuenciales, e incluye pero no se limita a los costos de mano de obra, gastos relacionados en el reemplazo o reparación de dicho producto.

Comuníquese con el equipo de Servicio al Cliente al 1-877-527-0313 o visite www.HomeDepot.com.

17 HOMEDEPOT.COM

Comuníquese al 1-877-527-0313 para solicitar asistencia.