Transcripción de documentos

English Deutsch Français / Русский Italiano Português Español / Mode d'emploi Manual de instrucciones Manual do Proprietário Manuale di istruzioni Руководство пользователя EN DE FR ES PT IT RU 取扱説明書 POWERED SPEAKER SYSTEM ZH JA 日本語 Bedienungsanleitung 中 文 Owner’s Manual  Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The above warning is located on the rear of the unit. IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 8 9 10 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 12 13 14 Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. (UL60065_03) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or colored GREEN or GREEN-andYELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. (3 wires) 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다. (class b korea)  Features Features .................................................. 3 PRECAUTIONS....................................... 4 The new HS series powered monitors inherit the underlying philosophy that has made Yamaha monitors standards in studios around the world, delivering accurate, detailed reproduction that is essential for quality sound production. NOTICE ................................................... 6  Accurate, detailed reproduction of the source. Information ............................................. 6  A choice of three full-range models plus one high-performance subwoofer makes it easy to create systems that are ideally matched to any monitoring environment. Included Items (please check) .............. 3 Rear Panel .............................................. 7 Setup....................................................... 9 Troubleshooting................................... 13 Connection and Cable Types.............. 14 Specifications .....................................118 Dimensions .........................................118 Performance Graph ............................119 English Contents  Simple 2-way design in the full-range models, with optimally matched high and low frequency units.  Response-tailoring controls match speaker output to a wide range of acoustic spaces.  In addition to studio standard XLR connectors, phone jacks allow direct connection of electronic musical instruments and other sources. Block Diagram.....................................119 Included Items (please check) Thank you for choosing a Yamaha powered monitor speaker or powered subwoofer. • Power cord In order to take maximum advantage of the • Owner’s Manual (this book) speaker’s features and ensure maximum performance and longevity, please read this manual carefully before using powered monitor speaker or powered subwoofer. Keep the manual in a safe place for future reference. HS8/HS7/HS5/HS8S Owner’s Manual 3  PA_en_2 1/2 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/power cord • Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. • Only use the voltage specified as correct for the device. The required voltage is printed on the name plate of the device. • Use only the supplied power cord/plug. If you notice any abnormality • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel. - The power cord or plug becomes frayed or damaged. - It emits unusual smells or smoke. - Some object has been dropped into the device. - There is a sudden loss of sound during use of the device. • If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Power supply/power cord • When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. • Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms. • Be sure to connect to an appropriate outlet with a protective grounding connection. Improper grounding can result in electrical shock, damage to the device(s), or even fire. Location Do not open • Do not place the device in an unstable position where it might accidentally fall over. • This device contains no user-serviceable parts. Do not open the device or attempt to disassemble the internal parts or modify them in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. • Do not use the device in a confined, poorly-ventilated location. Make sure that there is adequate space between the device and surrounding walls or other devices: at least 20cm at the sides, 20cm behind and 20cm above. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire. Water warning • Do not hold the bottom of the device when transporting or moving it. In doing so, you may pinch your hands under the device, and result in injury. • Do not expose the device to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the device, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Yamaha service personnel. • Never insert or remove an electric plug with wet hands. • Do not press the rear panel of the device against the wall. Doing so may cause the plug to come in contact with the wall and detach from the power cord, resulting in short circuiting, malfunction, or even fire. • Do not place the device in a location where it may come into contact with corrosive gases or salt air. Doing so may result in malfunction. • Before moving the device, remove all connected cables. Fire warning • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. 4 HS8/HS7/HS5/HS8S Owner’s Manual • When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.  PA_en_2 2/2 Connections English • Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum. Maintenance • Remove the power plug from the AC outlet when cleaning the device. Handling caution • Do not insert your fingers or hands in any gaps or openings on the device (ports). • Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or openings on the device (ports). If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Yamaha service personnel. • Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the buttons, switches or connectors. • Do not use speakers for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. • Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire. Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed. HS8/HS7/HS5/HS8S Owner’s Manual 5  NOTICE Information To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.  About this manual  Handling and Maintenance • Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components. • Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel. • When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. • Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several hours without turning on the power until the condensation has completely dried out. • During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the device. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth. • Interference From Cell Phones Using a cell phone near the speaker system can induce noise. If this occurs, move the cell phone further away from the speaker system. • Air blowing out of the bass reflex ports is normal, and often occurs when the speaker is handling program material with heavy bass content. • Always turn the power off when the device is not in use. • Avoid touching or allowing objects to come in contact with the speaker diaphragms. • These speakers should be used vertically, not laid on their side.  Connectors • XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-). 6 HS8/HS7/HS5/HS8S Owner’s Manual • The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your device. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.  Rear Panel HS8/HS7/HS5 English The HS8/HS7/HS5/HS8S switches and connectors are located on the rear panel, as described below. Speaker Input and Response Control 1 LEVEL control 1 Adjusts the output level of the speaker. When set to the 12-o’clock position the speaker is optimized for a nominal input level of +4 dB. 2 INPUT 1/2 connector These connectors receive the input signal to the speaker. Two input connectors are provided: one balanced XLR connector, and one balanced (TRS) phone jack. 2 NOTE The XLR and phone jack input connectors can not be used simultaneously. Use only one input connector at a time. NOTE Refer to “Connection and Cable Types” on page 14 for more connector details. 3 4 5 6 3 ROOM CONTROL switch Adjusts the speaker’s low-frequency response. This switch can be used to compensate for exaggerated low-frequency response that can be caused by reflections in some listening environments. Setting the switch to the [0] position produces a flat frequency response. The [-2 dB] setting attenuates the range below 500 Hz by 2 dB, and the [-4 dB] setting attenuates the range below 500 Hz by -4 dB. 4 HIGH TRIM switch Adjusts the speaker’s high-frequency response. Setting the switch to the [0] position produces a flat frequency response. The [+2 dB] setting boosts the range above 2 kHz by 2 dB, while the [-2 dB] setting attenuates the range above 2 kHz by -2 dB. 5 Power switch Turns power to the speaker ON or OFF. Rock the switch to the right [ ] to turn the power ON, or to the left [ ] to turn the power OFF. The logo on the front panel will light when the power is ON. Caution • Turning the power switch ON and OFF in rapid succession can cause the device’s electronics to malfunction. Please wait for 3 seconds or more after turning the power OFF before turning it ON again. • Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. 6 AC IN connector Connect the supplied power cable here. First connect the power cord to the speaker, then insert the power cord plug into the AC outlet. HS8/HS7/HS5/HS8S Owner’s Manual 7  HS8S (Subwoofer) 3 6 8 9 1 2 Subwoofer Connections 4 5 7 HS8S signal flow 1 34 2 1 INPUT L/R connector These connectors receive the input signal to the subwoofer. Balanced XLR and balanced phone jack connectors are provided for both the L and R inputs. The L and R inputs can be used simultaneously. Signals supplied to both the L and R inputs are mixed internally. NOTE The XLR and phone jack input connectors can not be used simultaneously. Use only one input connector at a time. NOTE Refer to “Connection and Cable Types” on page 14 for more connector details. 5 6 7 Subwoofer Response Control 5 HIGH CUT control Sets the cutoff frequency for subwoofer output highfrequency attenuation from 80 Hz to 120 Hz. 6 PHASE switch Connecting the Subwoofer to the HS8/HS7/HS5 Speakers 2 OUTPUT L/R connectors These are the subwoofer’s output connectors. The input signals received at the INPUT L and R connectors are output via the OUTPUT L and R connectors, respectively. Low frequency reproduction characteristics can be adjusted via the LOW CUT switch and LOW CUT control. 3 LOW CUT switch When this switch is ON, the low frequencies are attenuated prior to output via the OUTPUT L and R connectors at the frequency set by the LOW CUT control. The low-frequency attenuation cutoff frequency can be adjusted via the LOW CUT control. 4 LOW CUT control Adjusts the low-frequency attenuation cutoff frequency between 80 Hz and 120 Hz when the LOW CUT switch is ON. Switches the phase of the subwoofer output. This switch should be set to [NORM.] in most situations, but in combination with some speakers and in some speaker layouts switching to the [REV.] setting may improve low-frequency response. Select the setting that provides the best bass response in your system. 7 LEVEL control Adjusts the subwoofer output level. 8 Power switch Turns power to the subwoofer ON or OFF. Rock the switch to the right [ ] to turn the power ON, or to the left [ ] to turn the power OFF. The logo on the front panel will light when the power is ON. Caution • Turning the power switch ON and OFF in rapid succession can cause the device’s electronics to malfunction. Please wait for 3 seconds or more after turning the power OFF before turning it ON again. • Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. 9 AC IN connector Connect the supplied power cable here. First connect the power cord to the subwoofer, then insert the power cord plug into the AC outlet. 8 HS8/HS7/HS5/HS8S Owner’s Manual  Setup English In this section we’ll look at the general procedure for connecting and setting up a monitor speaker system. This is just an example though, so feel free to set up your own system in the way that best serves your personal listening needs.  Recommended cables Cables  For connection to a balanced phone jack input. You’ll need to acquire appropriate cables to connect the HS series monitor speakers to your audio interface or other source equipment. HS8/HS7/HS5 or • Short, high-quality cables Use high-quality cables of the shortest practical length. The longer the cable, the more chance there is that noise will creep in to degrade your sound.  For connection to an unbalanced phone jack input. • Balanced cables HS8/HS7/HS5 Balanced cables are more resistant to noise than unbalanced cables. If you have to use unbalanced cables because the source equipment only has unbalanced outputs, be sure to use the shortest possible unbalanced cables. NOTE Refer to “Connection and Cable Types” on page 14 for more connector details. The configurations of the balanced and unbalanced phone jack connectors are different. Connections NOTE Plug the supplied AC power cord into the corresponding socket on the speaker. Plug the power cord into the speaker first, and then insert the AC plug end into an appropriate AC wall outlet. Connecting to an Audio Interface When connecting an audio interface (Steinberg UR or MR series, etc.) to HS series speakers, connect the audio interface output connectors directly to the speakers’ input connectors. Normally you’ll connect to the LINE OUT 1 and 2 (1L and 2R outputs), although that might depend on the specific audio interface and DAW (Digital Audio Workstation) settings used. HS8/HS7/HS5 Connecting to a Mixer When connecting a mixer (Yamaha MGP or MG series, etc.) to HS series speakers, connect the mixer’s MONITOR OUT or C-R OUT (Control Room) connectors directly to the speakers’ input connectors. This makes it possible to control the monitor level independently from the mixer’s main bus level. HS8/HS7/HS5 HS8/HS7/HS5 INPUT INPUT HS8/HS7/HS5 L R MONITOR OUT or C-R OUT HS8/HS7/HS5/HS8S Owner’s Manual 9   Recommended cables  For connection to a balanced XLR input. NOTE Refer to “Connection and Cable Types” on page 14 for more connector details. The configurations of the balanced and unbalanced phone jack connectors are different. HS8/HS7/HS5 Setting Up for Superior Sound  For connection to an unbalanced phone jack input. A number of points should be observed when laying out a monitor speaker system. HS8/HS7/HS5 1.5 meters or more NOTE Refer to “Connection and Cable Types” on page 14 for more connector details. The configurations of the balanced and unbalanced phone jack connectors are different. 1.5 meters or more 60˚ Connecting to a Synthesizer or Other Electronic Musical Instrument When connecting an electronic musical instrument such as a Yamaha MOTIF synthesizer to the HS series speakers, connect the instrument’s L/MONO and R outputs to the HS speaker inputs. HS8/HS7/HS5 HS8/HS7/HS5  Point 1 Position speakers at least 1.5 meters away from walls or corners. OUTPUT L/MONO OUTPUT R Ideally, the speakers should be located at least 1.5 meters away from walls or corners. In situations where it is not possible to position the speakers a sufficient distance from walls or corners, the ROOM CONTROL switch can be used compensate for excessive bass. As you move the speaker closer to walls or corners, a higher compensation setting may be required to achieve natural sounding response ([0] → [-2] → [-4]).  Recommended cables  For connection to an unbalanced phone jack input. HS8/HS7/HS5 10 HS8/HS7/HS5/HS8S Owner’s Manual  Position the left and right speakers symmetrically. The left and right speakers should be positioned as symmetrically as possible in relation to the room. In other words, the left and right speakers should be the same distance from the rear wall and the respective left and right walls.  Point 3 The optimum listening position is at the apex of an equilateral triangle. For the most accurate sound and balance, position yourself at the apex of an equilateral triangle formed by the left and right speakers and yourself, with the speakers angled inward so that they’re facing you.  Point 4 Position the tweeters at ear height. High frequencies are quite directional, so for the most accurate monitoring the speakers should be set up so that the tweeters are at approximately the same height as your ears when you’re seated at the listening position. NOTE If necessary, adjust the ROOM CONTROL and HIGH TRIM switches for the most natural response (refer to page 7). English  Point 2 Adding a Subwoofer (HS8S) Adding a subwoofer to your monitor system can significantly improve its low-frequency fidelity, making it possible to create better overall mixes. The subwoofer is normally placed on the floor between the left and right full-range speakers, but since the subwoofer reproduces low frequencies below 200 Hz that are relatively non-directional, subwoofer positioning is not critical. Four cables are required: two to connect the audio interface or other source equipment to the HS8S subwoofer, and two more to connect the subwoofer to the left and right HS8/HS7/HS5 main speakers. The connections are made as shown below. HS8/HS7/HS5 HS8/HS7/HS5 HS8S HS8/HS7/HS5 Settings Once the physical layout of your monitor system is finalized, you can begin making the following settings. 1 Turn the level/volume controls on all source equipment (audio interface, etc.) all the way down. 2 Set the HS8/HS7/HS5 LEVEL control to the 12-o’clock position, and set both ROOM CONTROL and HIGH TRIM switches to 0 dB. 3 Turn the power to connected audio source devices on first, and then turn on power to the speakers. HS8S HS8/HS7/HS5 Audio interface or other source NOTE When turning power off, turn off the speakers first, and then turn off connected audio source devices. 4 Play some source material and gradually raise the level/volume controls on the source equipment. NOTE Be careful not to suddenly apply an excessively loud signal to the system. Excessive level can damage the speakers. 5 Set the listening level to a level at which you can listen comfortably without fatigue for an extended period of time. NOTE Plug the supplied AC power cord into the corresponding socket on the speaker. Plug the power cord into the speaker first, and then insert the AC plug end into an appropriate AC wall outlet. HS8/HS7/HS5/HS8S Owner’s Manual 11   Recommended cables  Settings for Speakers Plus Subwoofer Cables for connecting the audio source (audio interface, etc.) to the HS8S Once the subwoofer connections have been made and the layout is finalized, you can begin making the following settings.  For connection to a balanced phone jack input. HS8S 1 Turn the level/volume controls on all source equipment (audio interface, etc.) all the way down. 2 Set the HS8/HS7/HS5 LEVEL control to the 12-o’clock position, and set both ROOM CONTROL and HIGH TRIM switches to 0 dB. 3 Set the HS8S LEVEL control to 0, the HIGH CUT and LOW CUT controls to their 12o’clock positions, and set the LOW CUT switch to OFF. 4 Turn power on in the following order: audio source devices, then subwoofer, and finally the full-range speakers.  For connection to a balanced XLR input. HS8S  For connection to an unbalanced phone jack input. HS8S NOTE Turn power off in the following order: full-range speakers, then subwoofer, and finally audio source devices. 5 Play some source material and gradually raise the level/volume controls on the source equipment. NOTE Be careful not to suddenly apply an excessively loud signal to the system. Excessive level can damage the speakers. Cables for connection between the HS8S and HS8/HS7/HS5 6 Set the HS8S LEVEL control to between 10 and 12 o’clock, and turn the LOW CUT switch ON. 7 Set the listening level to a level at which you can listen comfortably without fatigue for an extended period of time. HS8S HS8 HS7 HS5 HS8 HS7 HS5 NOTE Refer to “Connection and Cable Types” on page 14 for more connector details. The configurations of the balanced and unbalanced phone jack connectors are different. 12 HS8/HS7/HS5/HS8S Owner’s Manual NOTE • If necessary, adjust the ROOM CONTROL and HIGH TRIM switches for the most natural response (refer to page 7). • If necessary, adjust the LOW CUT and HIGH CUT controls and the PHASE switch for the most natural response (refer to page 8).  Symptom Power won’t turn on / front panel logo doesn’t light. No sound. Noisy or distorted sound. Possible Cause English Troubleshooting Solution The power cord might not be connected properly. Check and connect the power cord. The power switch might not be turned on. Turn the power switch ON. If the problem persists, contact your Yamaha dealer. One or more cables might not be connected properly. Check that all cables are properly connected. The source equipment might not be supplying an audio signal. Make sure that the source equipment is functioning properly and delivering the required signal. The level setting might be too low. Adjust the output level setting of the source equipment, or use the LEVEL control to increase the output level. Are cables connected to both the XLR and phone jack INPUT connectors? The XLR and phone jack input connectors can not be used simultaneously. Use only one input connector at a time. One or more cables might be corroded, shorted, or otherwise broken. Replace faulty cable(s). The system might be picking up external noise. Try changing the positions or layout of the cables. Try changing the location of other electrical/ electronic devices that are near the speakers. HS8/HS7/HS5/HS8S Owner’s Manual 13  Connection and Cable Types To allow direct connection to equipment in a wide variety of working environments, the HS speakers are equipped with one XLR and one phone connector that both support balanced as well as unbalanced connections. Balanced or Unbalanced Balanced connections provide greater resistance to noise that can be picked up from external sources, effectively canceling induced noise while leaving the desired audio signal intact. Since the chance that noise will be picked up increases with the length of the cable, balanced connections are preferred for long cable runs. Unbalanced cables are commonly used to connect electronic musical instruments and guitars, etc., to amplification equipment. If your cable runs won’t be any longer than around one or two meters, which should suffice in most small rooms, then unbalanced cables can probably be used without any problems. If the source device has balanced outputs, the use of balanced cables is recommended to ensure optimum signal quality. Phone Connectors Phone type connectors can be used for both unbalanced and balanced connections. Cables fitted with TRS (Tip, Ring, Sleeve) phone plugs must be used to make balanced connections to the HS series speakers. The construction of TRS phone plugs is basically the same as stereo phone plugs. Tip: hot (+) Ring: cold (-) Sleeve: ground Connect standard mono phone plug cables to the HS speaker phone connectors for unbalanced connections. Cables The following types of cable connectors can be used with HS series speakers. Tip: hot (+) Sleeve: ground XLR Connectors XLR type connectors are widely used in professional audio equipment and installations. The three-pin XLR type connectors provided on the HS series speakers are primarily intended for use with balanced connections. XLR type plugs are rugged and reliable, and are therefore a good choice for outdoor applications. Pin 2: hot (+) Pin 3: cold (-) Pin 1: ground Pin 1: ground Pin 3: cold (-) Pin 2: hot (+) 14 HS8/HS7/HS5/HS8S Owner’s Manual RCA Pin Connectors Source devices that only have RCA pin type output connectors can be connected via RCA pin plug to phone plug conversion cables (cables with an RCA pin plug on one end and a phone plug on the other). Connections using RCA pin plug to phone plug conversion cables are unbalanced.  * Le specifiche e le descrizioni presenti in questo manuale sono fornite a fini puramente informativi. Yamaha Corp. si riserva il diritto di modificare prodotti o specifiche in qualsiasi momento senza preavviso. Dato che le specifiche, le apparecchiature o le opzioni possono essere diverse da paese a paese, verificarle con il proprio rappresentante Yamaha. * Технические характеристики и их описания в данном руководстве пользователя предназначены только для общего сведения. Корпорация Yamaha сохраняет за собой право модифицировать свои изделия и менять их технические характеристики без предварительного уведомления. Поскольку технические характеристики, оборудование и набор возможностей могут зависеть от региона, обращайтесь за информацией к местному представителю корпорации Yamaha. * 本使用说明书中的技术规格及介绍仅供参考。Yamaha公司保留随时更改或修订产品或技术规格的权利，若确有更改，恕不事先通 知。技术规格、设备或选购件在各个地区可能均会有所不同，因此如有问题，请和当地Yamaha经销商确认。 Deutsch Français Español * As especificações e as descrições contidas neste manual do proprietário têm apenas fins informativos. A Yamaha Corp. reserva-se o direito de alterar ou modificar produtos ou especificações a qualquer momento, sem notificação prévia. Como as especificações, os equipamentos ou as opções podem não ser iguais em todas as localidades, verifique esses itens com o revendedor Yamaha. Português * Las especificaciones y descripciones de este manual del propietario tienen sólo el propósito de servir como información. Yamaha Corp. se reserva el derecho a efectuar cambios o modificaciones en los productos o especificaciones en cualquier momento sin previo aviso. Puesto que las especificaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite información a su distribuidor Yamaha. Italiano * Les caractéristiques techniques et les descriptions du mode d’emploi ne sont données que pour information. Yamaha Corp. se réserve le droit de changer ou modifier les produits et leurs caractéristiques techniques à tout moment sans aucun avis. Du fait que les caractéristiques techniques, les équipements et les options peuvent différer d’un pays à l’autre, adressez-vous au distributeur Yamaha le plus proche. Русский * Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behält sich das Recht vor, Produkte oder deren technische Daten jederzeit ohne vorherige Ankündigung zu verändern oder zu modifizieren. Da die technischen Daten, das Gerät selbst oder Sonderzubehör nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit Ihrem Yamaha-Händler in Verbindung. English * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. 日本語 中 文 * 仕様および外観は、改良のため予告なく変更することがあります。 117  Specifications Model HS8 HS7 HS5 HS8S General Specifications Type Bi-amp 2-way powered speaker Crossover Frequency 2 kHz Powered subwoofer – -3dB 47 Hz – 24 kHz 55 Hz – 24 kHz 74 Hz – 24 kHz 33 Hz – 124 Hz -10dB 38 Hz – 30 kHz 43 Hz – 30 kHz 54 Hz – 30 kHz 22 Hz – 160 Hz Dimensions (W x H x D) 250 x 390 x 334 mm 9-13/16 x 15-3/8 x 13-1/8" 210 x 332 x 284 mm 8-1/4 x 13-1/16 x 11-3/16" 170 x 285 x 222 mm 6-11/16 x 11-1/4 x 8-3/4" 300 x 350 x 389 mm 11-13/16 x 13-3/4 x 15-5/16" Weight 10.2 kg (22.5 lb.) 8.2 kg (18.1 lb.) 5.3 kg (11.7 lb.) 12.5 kg (27.6 lb.) Speaker Components LF: 8" cone HF: 1" dome LF: 6.5" cone HF: 1" dome LF: 5" cone HF: 1" dome 8" cone Enclosure Bass-reflex type, Material: MDF 150 W, 4 ohms (dynamic power) Overall Frequency Response Speaker Components Amplifier Unit Output Power Total 120 W (dynamic power) 95 W (dynamic power) 70 W (dynamic power) LF 75 W (4 ohms) 60 W (4 ohms) 45 W (4 ohms) – HF 45 W (8 ohms) 35 W (8 ohms) 25 W (8 ohms) – Input Sensitivity / Impedance -10 dBu/10k ohms Output Level/Impedance – Input Connectors (Parallel) 1: XLR-3-31 type (balanced) 2: PHONE (balanced) Output Connectors -10 dBu/600 ohms – XLR-3-32 type (balanced) x2 (L&R) LEVEL control (+4 dB, center click) EQ: HIGH TRIM switch (+/- 2 dB at HF), ROOM CONTROL switch (0/-2/-4 dB under 500Hz) LEVEL control PHASE switch (NORM./REV.) HIGH CUT control (80 – 120 Hz, center click) LOW CUT control (80 – 120 Hz, center click) LOW CUT switch (ON/OFF) Controls Indicator Power ON (White LED) Power Consumption 60 W 55 W 45 W 70 W Dimensions HS8 HS7 Unit: mm (inch) Unit: mm (inch) 118 210 (8-1/4") 284 (11-3/16") 332 (13-1/16") 334 (13-1/8") 390 (15-3/8") 250 (9-13/16")  HS5 HS8S Unit: mm (inch) 170 (6-11/16") 222 (8-3/4") 389 (15-5/16") Español Français 350 (13-3/4") 285 (11-1/4") 300 (11-13/16") Performance Graph HS7 HS5 HS8S Italiano Português HS8 Deutsch English Unit: mm (inch) Block Diagram HS8/HS7/HS5 HIGH TRIM STEP FILTER LOWCUT P.AMP LEVEL Русский INPUT 1 LOW CUT ROOM CONTROL HF INPUT 2 LOW BOOST STEP FILTER HIGH CUT LIMITER P.AMP 中 文 LF LOW CUT ON/OFF HS8S L ch OUTPUT INPUT LOW CUT HIGH CUT PHASE 日本語 INPUT SUM R ch INPUT INPUT NORMAL REVERSE P.AMP OUTPUT LIMITTER LEVEL LOW CUT SPEAKER 119   For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col. San José Insurgentes, Delegación Benito Juárez, México, D.F., C.P. 03900 Tel: 55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4º andar, Itaim Bibi, CEP 04534-013 São Paulo, SP. BRAZIL Tel: 011-3704-1377 ARGENTINA Yamaha Music Latin America, S.A., Sucursal Argentina Olga Cossettini 1553, Piso 4 Norte, Madero Este-C1107CEK Buenos Aires, Argentina Tel: 011-4119-7000 VENEZUELA Yamaha Music Latin America, S.A., Sucursal Venezuela C.C. Manzanares Plaza P4 Ofic. 0401- Manzanares-Baruta Caracas Venezuela Tel: 58-212-943-1877 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Latin America, S.A. Torre Banco General, Piso No.7, Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, República de Panamá Tel: +507-269-5311 EUROPE THE UNITED KINGDOM/IRELAND Yamaha Music Europe GmbH (UK) Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, U.K. Tel: 01908-366700 GERMANY Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 SWITZERLAND/LIECHTENSTEIN Yamaha Music Europe GmbH Branch Switzerland in Zürich Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 044-387-8080 AUSTRIA/BULGARIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 CZECH REPUBLIC/HUNGARY/ ROMANIA/SLOVAKIA/SLOVENIA Yamaha Music Europe GmbH Branch Austria (Central Eastern Europe Office) Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 POLAND/LITHUANIA/LATVIA/ESTONIA Yamaha Music Europe GmbH Branch Poland Office ul. Wrotkowa 14 02-553 Warsaw, Poland Tel: 022-500-2925 PA36 Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. MALTA Olimpus Music Ltd. The Emporium, Level 3, St. Louis Street Msida MSD06 Tel: 02133-2144 NETHERLANDS/BELGIUM/ LUXEMBOURG Yamaha Music Europe Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, Netherlands Tel: 0347-358 040 FRANCE Yamaha Music Europe 7 rue Ambroise Croizat, Zone d'activites Pariest, 77183 Croissy-Beaubourg, France Tel: 01-64-61-4000 ITALY Yamaha Music Europe GmbH, Branch Italy Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 SPAIN/PORTUGAL Yamaha Music Europe GmbH Ibérica, Sucursal en España Ctra. de la Coruna km. 17,200, 28231 Las Rozas (Madrid), Spain Tel: +34-91-639-88-88 GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 SWEDEN/FINLAND/ICELAND Yamaha Music Europe GmbH Germany filial Scandinavia J. A. Wettergrensgata 1, Box 30053 S-400 43 Göteborg, Sweden Tel: +46 31 89 34 00 DENMARK Yamaha Music Europe GmbH, Tyskland – filial Denmark Generatorvej 6A, DK-2730 Herlev, Denmark Tel: 44 92 49 00 NORWAY Yamaha Music Europe GmbH Germany Norwegian Branch Grini Næringspark 1, N-1361 Østerås, Norway Tel: 67 16 78 00 RUSSIA Yamaha Music (Russia) LLC. Room 37, bld. 7, Kievskaya street, Moscow, 121059, Russia Tel: 495 626 5005 OTHER EUROPEAN COUNTRIES Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 ASIA THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 INDIA Yamaha Music India Pvt. Ltd. Spazedge building, Ground Floor, Tower A, Sector 47, Gurgaon- Sohna Road, Gurgaon, Haryana, India Tel: 0124-485-3300 INDONESIA PT. Yamaha Musik Indonesia (Distributor) Yamaha Music Center Bldg. Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 021-520-2577 KOREA Yamaha Music Korea Ltd. 8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 02-3467-3300 MALAYSIA Yamaha Music (Malaysia) Sdn., Bhd. No.8, Jalan Perbandaran, Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia Tel: 03-78030900 SINGAPORE Yamaha Music (Asia) Private Limited Block 202 Hougang Street 21, #02-00, Singapore 530202, Singapore Tel: 65-6747-4374 TAIWAN Yamaha Music & Electronics Taiwan Co.,Ltd. 3F, No.6, Section 2 Nan-Jing East Road, Taipei, Taiwan R.O.C. Tel: 02-2511-8688 THAILAND Siam Music Yamaha Co., Ltd. 3, 4, 15 and 16th floor, Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: 02-215-2622 VIETNAM Yamaha Music Vietnam Company Limited 15th Floor, Nam A Bank Tower, 201-203 Cach Mang Thang Tam St., Ward 4, Dist.3, Ho Chi Minh City, Vietnam Tel: +84-8-3818-1122 OTHER ASIAN COUNTRIES Yamaha Corporation Sales & Marketing Division Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 AFRICA Yamaha Music Gulf FZE Office JAFZA 16-512, P.O.Box 17328, Jebel Ali - Dubai, UAE Tel: +971-4-881-5868 MIDDLE EAST TURKEY Yamaha Music Europe GmbH Merkezi Almanya Türkiye İstanbul Şubesi Maslak Meydan Sokak No:5 Spring Giz Plaza Bağımsız Böl. No:3, 34398 Şişli İstanbul Tel: +90-212-999-8010 OCEANIA AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation Sales & Marketing Division Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 CYPRUS Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 OTHER COUNTRIES Yamaha Music Gulf FZE Office JAFZA 16-512, P.O.Box 17328, Jebel Ali - Dubai, U.A.E Tel: +971-4-881-5868 HEAD OFFICE Yamaha Corporation, Audio Products Sales and Marketing Division Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650  Yamaha Pro Audio global web site http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ C.S.G., PA Development Division © 2013 Yamaha Corporation 310MWCR*.*-**A0 Printed in Indonesia ZK02140