Yamaha NS-ICS600 El manual del propietario

Marca: Yamaha

Modelo: NS-ICS600

Categoría: Altavoces

Tipo: El manual del propietario

El Yamaha NS-ICS600 es una bocina para empotrar en el techo que ofrece un verdadero sonido estéreo con bajos pronunciados desde una unidad, ideal para habitaciones pequeñas que no requieren dos bocinas.

Con sus dos tweeters y un woofer de doble bobina de voz, el NS-ICS600 crea un campo de sonido estéreo amplio y equilibrado que llena el espacio de forma natural, envolviéndote en tu música y películas favoritas.

UTG

OWNER'S MANUAL

MODE D'EMPLOI

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

໪ቂངಖ༚

IN-CEILING SPEAKER

ENCEINTE ENCASTRABLE POUR PLAFOND

'0A;#/#*#AURGCMGTA%QXGTHOࡍ࡯ࠫ㧞㧜㧝㧜ᐕ㧤᦬㧢ᣣޓ㊄ᦐᣣޓඦ೨㧤ᤨ㧡㧝ಽ

1 En

Read these precautions carefully before setting up

your NS-ICS600 speaker.

• When mounting this speaker, be sure to work with two or more

persons for safety.

• Do not attach it to thin plywood or soft ceiling surface materials

as the screws may tear free, causing the speaker to fall and

become damaged, or result in personal injury.

• Do not fasten the speaker to a ceiling with nails, adhesives, or

other unsafe hardware. Long-term use and vibrations may

cause them to pull free.

• Do not place the speaker where they are liable to be knocked

over or struck by falling objects. Stable placement will also

ensure better sound performance.

• Do not attempt to modify or fix the speaker. Contact qualified

Yamaha service personnel when any service is needed.

• Do not attempt to clean the speaker with chemical solvents as

this might damage the finish. To clean, wipe with a dry, soft

cloth.

• Secure placement or installation is the owner's

responsibility. Yamaha shall not be liable for any accident

caused by improper placement or installation of speaker.

Limited Guarantee for European Economic Area (EEA) and Switzerland

Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the

dealer from whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can

find full details on our website (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident).

The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original

purchase. Yamaha undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at

Yamaha’s discretion, without any charge for parts or labour. Yamaha reserves the right to replace a product with that of a similar kind and/or

value and condition, where a model has been discontinued or is considered uneconomic to repair.

Conditions

1. The original invoice or sales receipt (showing date of purchase, product code and dealer’s name) MUST accompany the defective

product, along with a statement detailing the fault. In the absence of this clear proof of purchase, Yamaha reserves the right to refuse to

provide free of charge service and the product may be returned at the customer’s expense.

2. The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area (EEA) or

Switzerland.

3. The product must not have been the subject of any modifications or alterations, unless authorised in writing by Yamaha.

4. The following are excluded from this guarantee:

a. Periodic maintenance and repair or replacement of parts due to normal wear and tear.

b. Damage resulting from:

(1) Repairs performed by the customer himself or by an unauthorised third party.

(2) Inadequate packaging or mishandling, when the product is in transit from the customer. Please note that it is the customer’s

responsibility to ensure the product is adequately packaged when returning the product for repair.

(3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha’s instructions

on the proper use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or

safety standards in force in the country where it is used.

(4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha’s control.

(5) Defects of the system into which this product is incorporated and/or incompatibility with third party products.

(6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or

safety standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or

Switzerland.

5. Where the guarantee differs between the country of purchase and the country of use of the product, the guarantee of the country of use

shall apply.

6. Yamaha may not be held responsible for any losses or damages, whether direct, consequential or otherwise, save for the repair or

replacement of the product.

7. Please backup any custom settings or data, as Yamaha may not be held responsible for any alteration or loss to such settings or data.

8. This guarantee does not affect the consumer’s statutory rights under applicable national laws in force or the consumer’s rights against the

dealer arising from their sales/purchase contract.

CONSUMER PRECAUTIONS

This symbol on the products, packaging, and/or

accompanying documents means that used

electrical and electronic products should not be

mixed with general household waste.

For proper treatment, recovery and recycling of

old products, please take them to applicable

collection points, in accordance with your

national legislation and the Directives 2002/96/

EC.

By disposing of these products correctly, you will

help to save valuable resources and prevent any

potential negative effects on human health and

the environment which could otherwise arise

from inappropriate waste handling.

For more information about collection and

recycling of old products, please contact your

local municipality, your waste disposal service or

the point of salewhere you purchased the items.

[Information on Disposal in other Countries

outside the European Union]

This symbol is only valid in the European

Union. If you wish to discard these items,

please contact your local authorities or dealer

and ask for the correct method of disposal.

Information for Users on Collection and

Disposal of Old Equipment

'0A;#/#*#AURGCMGTHOࡍ࡯ࠫ㧞㧜㧝㧜ᐕ㧤᦬㧢ᣣޓ㊄ᦐᣣޓඦ೨㧤ᤨ㧠ಽ

2 En

English

Example Installation

Quality stereo sound from just one

in-ceiling speaker

The NS-ICS600 can provide actual stereo sounds from

just one in-ceiling speaker, making it perfect for smaller

rooms that do not require two speakers.

The design of the NS-ICS600 includes dual tweeters

and dual voice coil woofer, enabling stereo sound from

just one speaker. It is perfect for bathrooms, closets,

entryways, kitchens, and others.

• Do not place the speaker in a location where foreign objects

such as water drops may come into contact with the speaker

or near heat. This may cause the speaker to malfunction.

CONTENTS

CONSUMER PRECAUTIONS......................................1

CONTENTS..................................................................2

PREPARATION ............................................................2

Optimum installation layout.......................................2

INSTALLATION............................................................3

Before installation ....................................................3

How to install.............................................................4

CONNECTING YOUR AMPLIFIER/RECEIVER ..........6

Connections..............................................................6

How to connect.........................................................6

After connecting........................................................6

PAINTING THE SPEAKER GRILLE............................6

SPECIFICATIONS .......................................................6

PREPARETION

Optimum installation layout

NS-ICS600

Hallway

Kitchen

Laundry room

Bathroom

'0A;#/#*#AURGCMGTHOࡍ࡯ࠫ㧞㧜㧝㧜ᐕ㧤᦬㧢ᣣޓ㊄ᦐᣣޓඦᓟ㧝ᤨ㧡ಽ

3 En

The following is the recommended procedure for

installing the speaker in a ceiling. Please read it

carefully before installation.

• Before you begin installation, read this owner's

manual completely and consult your local building

codes. If you have any doubt, contact your dealer or a

qualified audio/video installer.

• Before installing the speaker, run the speaker cables

to the installation location.

CAUTION

• When installing the speaker, do not touch the woofer

or tweeter units with your hands or expose them to

excessive physical shock. If they are dented or bent,

the sound will be distorted.

• Be aware of any concealed studs, electrical wiring or

plumbing in the ceiling into which you are installing

the speaker. If you are not sure of a safe way to install

this speaker, consult a professional installer or a

building contractor.

• When installing your NS-ICS600 in-ceiling speaker,

be aware of the product weight (See specification

page) and the sturdiness of the material into which

you are installing the speaker.

• Placing the speaker too close to a CRT-type TV may

impair the picture color or cause a buzzing noise. In

this case, move the speaker away from the TV. This is

not an issue with LCD and plasma TVs.

NOTE

• If you wish to paint the speaker grille, refer to page 6

“PAINTING THE SPEAKER GRILLE” before proceeding.

Ceiling board thickness and clearance

space above ceiling

• Check to ensure that the area you are installing the

speaker is free of any ceiling joints or studs by

tapping the ceiling or using a stud finder.

• Make sure that there is sufficient space on the ceiling

for installation and that there are no obstructions

such as ducts, pipes, etc. See the following chart for

external product dimensions and ceiling installation

measurements.

• The thickness required for the ceiling boards is 5 – 30

mm (1/4” – 1-1/8”).

* The size differs depending on the model. Refer to the above

chart.

PREPARATION

INSTALLATION

NS-ICS600 Speaker u1

Unpacking

After unpacking, check that the following items are

contained.

Tools needed for installation

When installing the speaker to the ceiling, you will

need to prepare the following tools.

* Use an appropriate tool for the material of the mounting

surface.

Drill

Philips

screwdriver

Pencil

Safety gogglesWire strippers Keyhole saw

GlovesSturdy wire

(such as a coat hanger)

Speaker grille u1

Cutout template u1

Before installation

NS-ICS600

Diameter A I 231 mm (9-1/8”)

Depth B 113.5 mm (4-1/2”)

Depth C 109 mm (4-1/4”)

Diameter D I 204 mm (8”)

'0A;#/#*#AURGCMGTHOࡍ࡯ࠫ㧞㧜㧝㧜ᐕ㧤᦬㧢ᣣޓ㊄ᦐᣣޓඦ೨㧤ᤨ㧠ಽ

4 En

English

This is the recommended installation procedure when

the material of the installation location is plasterboard.

1 Position the cutout template where you are

installing the speaker.

2 Trace a line around the template with a pencil.

The mark for the center of the hole is also

required.

3 Drill the pilot hole at the center mark made on the

ceiling.

WARNING

• When using a drill or cutting tool, use safety goggles for eye

protection and be sure to observe all safety precautions.

4 To check the space behind the hole, insert a bent

sturdy wire (such as a coat hanger) into the hole,

and then slowly rotate the wire to check for any

obstruction.

• If there is any obstruction, patch the hole and select

another location.

5 Insert the tip of a keyhole saw into the pilot hole,

and then cut all of the way around the circular

outline.

WARNING

• When using a keyhole saw or cutting tool, use safety goggles

for eye protection and be sure to observe all safety precautions.

6 Pull the speaker cables out of the hole which you

have cut.

• Leave some extra length of cable when pulling the cable

out.

7 Connect the speaker cables to the speaker.

• For detailed instructions, refer to page 6

“CONNECTING YOUR AMPLIFIER/RECEIVER”.

8 Place the speaker into the ceiling.

CAUTION

• When installing the speaker, do not touch the tweeter domes

or woofer cone directly. This may cause a malfunction.

• Make sure that mounting clamps are turned inward when

installing the speaker in a ceiling.

HINT

• When installing, you can adjust the direction of the tweeters

based on your listening position

How to install

360°

'0A;#/#*#AURGCMGTHOࡍ࡯ࠫ㧞㧜㧝㧜ᐕ㧤᦬㧢ᣣޓ㊄ᦐᣣޓඦ೨㧤ᤨ㧠ಽ

5 En

9 Insert the speaker into the hole. Loosen four

screws approximately one turn counter-

clockwise. It will allow the clamps to open easily.

Evenly tighten each of the four mounting screws

clockwise using a Philips screwdriver. (At this

time, these four mounting clamps open in the

ceiling. These opened clamps will press the

ceiling board and the speaker together to secure

the speaker.) Tighten screws until the mounting

clamps sufficiently grip the ceiling. Tighten the

screws firmly to secure the speaker to the ceiling.

ޓޓޓޓޓޓޓ

CAUTION

• When tightening the screws, do not screw too tightly. This

may cause breakage of the mounting clamps and fracture of

the wallboard.

• We recommend using only hand tools as power screwdrivers

may over-tighten the screws. Should you use a power

screwdriver be certain to select a very low torque setting to

prevent damage to the speaker or to the wallboard.

• Make sure that none of the screws are loose and that there

are no gaps between the speaker and the ceiling.

HINT

• Tighten the screws in order of

opposite sides rather than

clockwise or counter-clockwise

direction (such as right and left,

then top and bottom).

10 Adjust the angle of the tweeters.

• Gently press the outer edge of the tweeter housing

toward the listening position.

• The movable angle of the tweeters is about 5q to left or

right.

CAUTION

• When adjusting the tweeters, do not rotate them. This may

cause the breakage of the tweeters.

11 Attach the speaker grille to the speaker.

• As several magnets are on the speaker frame, attach

the grille to the frame directly. When attaching the

grille, make sure that the grille is attached to the

speaker securely to keep the grille from falling.

CAUTION

• Be very careful when removing the grille, as it may fall or

cause injury. Also, try to place an equal amount of pressure

on the circumference when removing the grille. The grille

may bend if too much pressure is placed in one location.

Loosen

Tighten









5°

*Tweeter

movable angle

'0A;#/#*#AURGCMGTHOࡍ࡯ࠫ㧞㧜㧝㧜ᐕ㧤᦬㧢ᣣޓ㊄ᦐᣣޓඦ೨㧤ᤨ㧠ಽ

6 En

English

Before making connections, make sure that the

amplifier/receiver is switched off.

• When connecting, also refer to the owner’s manual of the

connected equipment.

• Connect the push input terminals at the rear of the

speaker to the speaker output terminals of the amplifier/

receiver with the speaker cables (not included).

• Be sure to connect the left channel (L), right channel

(R), “+” (red) and “–” (black) properly. If the speaker is

connected with reversed polarity, the sound will be

unnatural and lack bass.

1 Remove approximately 10 mm (3/8”) of insulation

from the end of each speaker cable using wire

strippers, and then twist the exposed wires of the

cable together to prevent short circuits.

2 Press and hold down the speaker terminal.

3 Insert the bare wire into the hole in the side of

each terminal.

4 Release the terminal.

• Test the firmness of the connection by pulling lightly on

the cable at the terminal.

CAUTION

• Do not let the bare speaker wires touch each other as this

could damage the speaker or amplifier/receiver, or both.

• Lower the power amplifier/receiver volume control

before changing input sources. Never change input

sources (for example, FM to CD) at high listening

levels. Always turn the receiver/amplifier unit off when

installing or removing any cables.

• Anytime you note distortion, reduce the volume

control on your power amplifier/receiver to a lower

setting. Never allow your power amplifier to be driven

into “clipping”.

The speaker grille can be painted to match your room

décor. Use high quality spray paint and select a well

ventilated area before proceeding.

1 Carefully remove the grille from the speaker if

attached.

2 Remove the scrim cloth that is attached to the

back of the grille. (The adhesive that holds the

cloth in place is reusable.)

3 Apply the paint to the grille.

• Make sure that the grille holes remain free of paint.

• Clogging the holes with paint may diminish the sound

quality.

4 When the paint has fully dried, re-attach the

scrim cloth to the back of the grille.

5 Re-install the grille on the speaker.

* Specifications subject to change without notice due to

product improvements.

* Speaker cables are not included with this model.

CONNECTING YOUR AMPLIFIER/RECEIVER

Connections

How to connect

10mm

(3/8")

No Good

Good

NS-ICS600

Receiver or

amplifier

Speaker output

terminals

After connecting

PAINTING THE SPEAKER GRILLE

SPECIFICATIONS

NS-ICS600

Type 2-way Open back type

Driver

Tweeter 2.5 cm (1”) Soft dome type u 2

Woofer 16 cm (6.5”) Cone type (Dual voice coil)

Frequency response 65 Hz to 28 kHz (-10dB)

Impedance 8 ohms

Nominal input 20 W u 2

Maximum input 60 W u 2

Sensitivity 89 dB / 2.83 V, 1 m

Crossover frequency 3.2 kHz

Dimensions (with grille) I242 u 119D mm (I9-1/2” u 4-5/8”D)

Weight (with grille) 1.8 kg (4 lbs)

'0A;#/#*#AURGCMGTHOࡍ࡯ࠫ㧞㧜㧝㧜ᐕ㧤᦬㧢ᣣޓ㊄ᦐᣣޓඦ೨㧤ᤨ㧠ಽ

Printed in Indonesia WV73980

'0A;#/#*#AURGCMGTA%QXGTHOࡍ࡯ࠫ㧞㧜㧝㧜ᐕ㧤᦬㧢ᣣޓ㊄ᦐᣣޓඦ೨㧤ᤨ㧡㧝ಽ

Yamaha NS-ICS600 El manual del propietario

Marca: Yamaha

Modelo: NS-ICS600

Categoría: Altavoces

Tipo: El manual del propietario

Descargar PDF

informe

En otros idiomas

français: Yamaha NS-ICS600 Le manuel du propriétaire
italiano: Yamaha NS-ICS600 Manuale del proprietario
English: Yamaha NS-ICS600 Owner's manual
Deutsch: Yamaha NS-ICS600 Bedienungsanleitung
русский: Yamaha NS-ICS600 Инструкция по применению
Nederlands: Yamaha NS-ICS600 de handleiding
português: Yamaha NS-ICS600 Manual do proprietário
dansk: Yamaha NS-ICS600 Brugervejledning
polski: Yamaha NS-ICS600 Instrukcja obsługi
čeština: Yamaha NS-ICS600 Návod k obsluze
svenska: Yamaha NS-ICS600 Bruksanvisning
Türkçe: Yamaha NS-ICS600 El kitabı
suomi: Yamaha NS-ICS600 Omistajan opas
română: Yamaha NS-ICS600 Manualul proprietarului

Yamaha NS-ICS600 El manual del propietario

Yamaha NS-ICS600 El manual del propietario

En otros idiomas

Documentos relacionados

Otros documentos