Modern Forms Ultra Germicidal Smart Fan Manual de usuario
- Tipo
- Manual de usuario
Ultra
Germicidal* Smart Fan
*Reduces the SARS COV-2 viruses and other airborne pathogens.
UV Module Replacement
works with the
Google Assistant
UVF7IN-120V-R1-MOD
UVF7IN-120V-R1-MOD
Ultra UV Instructions Ultra UV Instructions2 3
Package Contents
1. UV Module x 2
2. Thumb Screws / Thin Cushions x 3
3. Metal Screws / Plastic Pillars x 3
4. Tool x 1
Thumb Screw / Thin Cushions
UV Module - 1 of 2
UV Module - 2 of 2
Metal Screw /
Plastic Pillars
UVF7IN-120V-R1-MOD
UVF7IN-120V-R1-MOD
Ultra UV Instructions Ultra UV Instructions4 5
11A
1B 1C
Replacing the UV Module (UVF7IN-120V-R1-MOD)
For further operation, maintenance, and troubleshooting
information, visit http://modernforms.com/fan-support/
or contact fansupport@modernforms.com
Your UV Module has an approximate 1 year lifespan which you can
monitor on the mobile app. When there are approximately 80 hours
remaining in the module’s life - the light will flash when turned on
indicating you should replace the module. Once this occurs, please
refer the following instructions:
1. Make sure the UV light is off. Refer to the Safety Rules
section of the fan instruction manual.
2. Once you’ve made sure the UV light is off - use a ladder to gain
access to the top of the fan.
3. Slide up the coupling cover to gain access to the UV Module
(UVF7IN-120V-R1-MOD) (Fig. 1)
4. Remove the knurled screws by hand from the outer perimeter of
the glass fixing plate. (Fig. 1A)
5. Lift up the glass fixing plate/silicone ring and remove the two
pieces of the glass. Set them carefully to the side. Hold the glass
fixing plate/silicone ring up - they cannot be removed. (Fig. 1B)
6. Unscrew the module from the tray with the provided tool. Set
the screws near by for a subsequent step using the included tool.
(Fig. 1C)
CAUTION:
WARNING:
This product emits ultraviolet (UV) radiation.
Exposure to UV radiation can cause serious personal injuries,
including damage to eyes and skin. Avoid direct exposure
to the UV light. For more safety instructions, please refer to
page 5 of this instruction manual (“UV Safety Rules”).
WARNING:
Ultraviolet (UV) Radiation Hazard. The lamp in this
unit produces UV light. Skin or eye damage may result from direct
exposure to UV light. Avoid direct exposure to UV light. Always turn
off and disconnect power before servicing the lamp or the unit. See
Instructions for UV Safety Rules.
WARNING:
This product should be installed by a licensed
electrician. This product should be mounted to an outlet box UL-listed
marked “Acceptable for fan support” of 15.9 kg (35 lbs) or less and
should use mounting screws provided with the outlet box and/or
support directly from building structure. Most outlet boxes commonly
used for the support of luminaires are not acceptable for fan support.
Consult a licensed electrician.
NOTE: You may take down the entire fan to replace the module, but it
is not required.
UVF7IN-120V-R1-MOD
UVF7IN-120V-R1-MOD
Ultra UV Instructions Ultra UV Instructions6 7
1F 1G
1H 1I
1. Replacing the UV Module cont.
7. Disconnect the two pieces of the module from the tray by
pushing into the terminal block with the included tool and
pulling the wires out at the same time. You can later discard
these two pieces. (Fig. 1D)
8. Take your new module and reconnect it to the tray at the same
connection point (where for the former module was removed)
by pushing in to the terminal block with the tool and pushing
into the wires at the same time. Make sure the wires are locked
in to the terminal block before moving on to the next steps.
(Fig. 1E)
9. Screw in the module to the tray with the 3 previously removed
screws. (Fig. 1F)
10. Place the two pieces of glass/silicone ring, and glass fixing
plate down on the tray. Make sure the parts are level on the
tray before moving on to the the next step. (Fig. 1G)
11. Secure the module, glass fixing plate/silicone ring with the
three previously removed knurled screws by hand. Make sure
they are on tight. (Fig. 1H)
12. Slide the coupling cover down on top of the fan. Refer to the UV
safety Rules before powering your fan back on. (Fig. 1I)
13. Reset the end of life timer by holding the and buttons
for 4 seconds. The fan receiver will beep a short, long, short
sequence, indicating the reset was successful. Alternatively
you can reset the timer using the mobile app.
1E
WARNING:
This product emits ultraviolet
(UV) radiation. Exposure to UV radiation can cause
serious personal injuries, including damage to eyes
and skin. Avoid direct exposure to the UV light. For
more safety instructions, please refer to page 5 of this
instruction manual (“UV Safety Rules”).
1D
UVF7IN-120V-R1-MOD
UVF7IN-120V-R1-MOD
Ultra UV Instructions Ultra UV Instructions8 9
Félicitations pour votre nouvel achat.
Votre nouveau ventilateur intelligent Modern Forms est conçu pour vous simplifier la vie au quotidien. Modern Forms
crée des ventilateurs et des luminaires d’avant-garde qui permettent des économies d’énergie et une efficacité
exceptionnelle. Notre engagement à bien faire les choses va au-delà de notre amour pour les produits étonnants.
Modern Forms garantit à tous ses produits pour ventilateurs de plafond pour extérieur qu’ils ne doivent présenter
aucun défaut de matériau ou de fabrication pendant un (1) an date d’achat; Les modules d’éclairage à LED sont
garantis pendant cinq (5) ans; Les moteurs à courant continu et les finis en acier inoxydable sont garantis à vie dans les
conditions normales d’utilisation par le premier acheteur non revendeur.
Bien que Modern Forms utilise les meilleurs matériaux disponibles et effectue des tests approfondis pour l’endurance
de la finition, des décolorations ou des craies peuvent se produire et sont considérés comme normaux. Pour les
zones côtières, une certaine corrosion et / ou détérioration est considérée comme une «usure normale» dans cet
environnement. Par conséquent, toute réclamation liée à la finition en raison des conditions de l’environnement côtier
ne s’applique pas à notre garantie. Si un produit est défectueux, tous les efforts seront déployés pour y remédier. Le
problème sur le terrain. Si le problème ne peut pas être résolu, un numéro RGA sera attribué. L’obligation de Modern
Forms est expressément limitée à la réparation ou au remplacement, sans frais, dans l’usine de Modern Forms après
autorisation écrite préalable du retour. L’obligation de Modern Forms au titre de cette garantie ne s’étendra pas
au-delà du prix d’achat initial du produit par le distributeur. En conséquence, tout dommage indirect ou tout coût de
main-d’œuvre résultant d’un défaut est expressément exclu. Cette garantie ne s’applique pas aux produits modifiés,
mal installés, manipulés ou utilisés de manière inappropriée. Modern Forms doit recevoir un avis écrit du défaut dans
un délai de cinq (5) ans à compter de la date d’achat (ou selon la période précisée dans les informations fournies).
Sont exclus de la garantie tout composant tiers bénéficiant de la garantie du fabricant. Remarque: la garantie des
produits Modern Forms ne s’applique qu’aux achats auprès des distributeurs agréés Modern Forms. IL N’Y A AUCUNE
GARANTIE QUI ALLAIT AU-DELÀ DE LA DESCRIPTION FACE AU PRESENT, INCLUANT LES GARANTIES DE QUALITÉ
MARCHANDE ET D’ADÉQUATION À UN USAGE PARTICULIER. La marque et les logos Bluetooth ® sont des marques
déposées appartenant à Bluetooth SIG, Inc. et toute utilisation de ces marques par Wangs Alliance Corporation est
sous licence. Les autres marques et noms commerciaux appartiennent à leurs propriétaires respectifs.
parte del distribuidor y, en consecuencia, cualquier daño consecuencial o costo de mano de obra que surja de un
defecto se excluye expresamente. Esta garantía no se aplicará a los productos que hayan sido alterados, instalados
incorrectamente, mal manejados o mal utilizados. La notificación de un defecto por escrito debe ser recibida por
Modern Forms dentro de los cinco (5) años a partir de la fecha de compra (o según el período de tiempo indicado
en el material). Quedan excluidos de la garantía todos los componentes de terceros que tengan la garantía de su
propio fabricante. Nota: la garantía del producto Modern Forms se aplica solo a las compras de los distribuidores
autorizados de Modern Forms. NO HAY GARANTÍAS QUE SE EXTIENDAN MÁS ALLÁ DE LA DESCRIPCIÓN DE SU
CARACTERÍSTICA, INCLUIDAS LAS GARANTÍAS DE COMERCIABILIDAD Y ADECUACIÓN PARA UN PROPÓSITO
PARTICULAR. La marca denominativa y los logotipos Bluetooth ® son marcas registradas propiedad de Bluetooth SIG,
Inc. y cualquier uso de dichas marcas por parte de Wangs Alliance Corporation se realiza bajo licencia. Otras marcas
comerciales y nombres comerciales pertenecen a sus respectivos propietarios.
Congratulations on your new purchase.
Your new Modern Forms Smart Fan is engineered to make life easier every day. Modern Forms creates future-forward
fans and luminaires that provide energy savings and outstanding efficiency. Our dedication to doing things the right
way goes beyond our love for amazing products. Modern Forms Smart Fans™ warrants any of its outdoor rated ceiling
fan products that they are to be free from defects in material and workmanship for a period of one (1) year from the
date of purchase; outdoor painted finishes are warranted for two (2) years; electronic components are warranted for
five (5) years; DC motors and stainless steel finishes are warranted for lifetime under normal use to the first non-dealer
purchaser. UV modules should be operational for approximately one year, but we do not offer any express warranties on
their longevity.
Although Modern Forms uses the best available materials and does extensive testing for finish endurance, some
fading or chalking may occur and is considered normal. For coastal locations, some corrosion and/or deterioration is
considered “normal wear” in this environment. Therefore, any finish claim due to coastal environment conditions is
not applicable to our warranty. If a product is defective, all efforts will be made to correct the problem in the field. If the
problem cannot be resolved, an RGA number will be issued. Modern Forms obligation is expressly limited to repair or
replacement, without charge, at the Modern Forms factory after prior written return authorization has been granted.
Modern Forms obligation under this warranty shall not extend beyond the distributor’s initial purchase price of the
product and accordingly any consequential damages or labor costs arising out of a defect are expressly excluded. This
warranty shall not apply to products that have been altered, improperly installed, mishandled or misused. Notice of
a defect in writing must be received by Modern Forms within five (5) years from the date of purchase (or according
period of time as outlined by material). Excluded from warranty are any 3rd party component which carries its own
manufacturer’s warranty. Note: Modern Forms product warranty applies only to purchases from authorized Modern
Forms distributors. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The Bluetooth ® word
mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Wangs Alliance
Corporation is under license. Other trademarks and trade names are those of their respective owners.
Felicidades por tu nueva compra.
Su nuevo ventilador moderno de formas modernas está diseñado para facilitarle la vida cada día. Modern Forms
crea ventiladores y luminarias para el futuro que proporcionan ahorros de energía y eficiencia excepcional. Nuestra
dedicación a hacer las cosas de la manera correcta va más allá de nuestro amor por los productos asombrosos. Modern
Forms garantiza a cualquiera de sus productos para ventiladores de techo con clasificación exterior que estén libres de
defectos en materiales y mano de obra por un período de un (1) año desde el fecha de compra; Los módulos de luz LED
están garantizados por cinco (5) años; Los motores de CC y los acabados de acero inoxidable están garantizados de
por vida bajo el uso normal para el primer comprador no distribuidor.
Aunque Modern Forms utiliza los mejores materiales disponibles y realiza pruebas exhaustivas para la resistencia del
acabado, puede producirse cierto desvanecimiento o parloteo y se considera normal. Para las ubicaciones costeras,
cierta corrosión y / o deterioro se considera “desgaste normal” en este entorno. Por lo tanto, cualquier reclamación de
acabado debido a las condiciones del entorno costero no se aplica a nuestra garantía. Si un producto es defectuoso,
se harán todos los esfuerzos para corregirlo. El problema en el campo. Si el problema no se puede resolver, se emitirá
un número RGA. La obligación de Modern Forms se limita expresamente a la reparación o el reemplazo, sin cargo,
en la fábrica de Modern Forms después de que se haya otorgado una autorización previa por escrito.La obligación
de Formas modernas bajo esta garantía no se extenderá más allá del precio de compra inicial del producto por
Certificate of Warranty
Disclaimer:
While there may be information here or on our website relating to the effectiveness of the
UV-C technology incorporated in the ULTRA in reducing SARS-CoV-2 and other pathogens in the air, Modern
Forms makes no claims that its products can cure, treat or prevent any conditions, including COVID-19 or other
conditions that may be caused by airborne pathogens. Always consult your healthcare provider with any health-
related questions.Whole room pathogen concentrations will vary between installation locations, and the number of
ULTRA fans installed, and it is not possible to predict the extent of reductions that will be achieved by the ULTRA in
whole room air in any particular room or environment. The ULTRA is not a substitute for good building air exchange
practices or manual cleaning and disinfection practices.
modernforms.com
UVF7IN-120V-R1-MOD
-
1
-
2
-
3
-
4
-
5
-
6
Modern Forms Ultra Germicidal Smart Fan Manual de usuario
- Tipo
- Manual de usuario
En otros idiomas
Documentos relacionados
-
Modern Forms WS-W68612 Skyscraper Instrucciones de operación
-
-
-
-
-
-
-
-
-